kirkwood: drop support for 3.14
authorLuka Perkov <luka@openwrt.org>
Thu, 5 Mar 2015 23:43:27 +0000 (23:43 +0000)
committerLuka Perkov <luka@openwrt.org>
Thu, 5 Mar 2015 23:43:27 +0000 (23:43 +0000)
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44610

target/linux/kirkwood/config-3.14 [deleted file]
target/linux/kirkwood/patches-3.14/110-ib62x0.patch [deleted file]
target/linux/kirkwood/patches-3.14/120-iomega_ix2_200.patch [deleted file]
target/linux/kirkwood/patches-3.14/130-iconnect.patch [deleted file]
target/linux/kirkwood/patches-3.14/140-dockstar.patch [deleted file]
target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch [deleted file]
target/linux/kirkwood/patches-3.14/160-ea4500.patch [deleted file]
target/linux/kirkwood/patches-3.14/170-ea3500.patch [deleted file]
target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch [deleted file]

diff --git a/target/linux/kirkwood/config-3.14 b/target/linux/kirkwood/config-3.14
deleted file mode 100644 (file)
index ed5759d..0000000
+++ /dev/null
@@ -1,307 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_CPUFREQ=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_ARCH_KIRKWOOD_DT=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ATAGS=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-# CONFIG_DEBUG_UART_PL01X is not set
-CONFIG_DEBUG_UART_VIRT=0xfed12000
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DLCI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_EXT4_FS=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_INET_LRO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KIRKWOOD_CLK=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_NETXBIG=y
-CONFIG_LEDS_NS2=y
-# CONFIG_LEDS_REGULATOR is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_D2NET_V2 is not set
-# CONFIG_MACH_MV88F6281GTW_GE_DT is not set
-# CONFIG_MACH_NET2BIG_V2 is not set
-# CONFIG_MACH_NET5BIG_V2 is not set
-# CONFIG_MACH_OPENRD_BASE is not set
-# CONFIG_MACH_OPENRD_CLIENT is not set
-# CONFIG_MACH_OPENRD_ULTIMATE is not set
-# CONFIG_MACH_RD88F6192_NAS is not set
-# CONFIG_MACH_RD88F6281 is not set
-# CONFIG_MACH_T5325 is not set
-# CONFIG_MACH_TS219 is not set
-# CONFIG_MACH_TS41X is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ORION=y
-# CONFIG_MTD_SM_COMMON is not set
-CONFIG_MTD_SPLIT_SUPPORT=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-# CONFIG_MTD_UBI_BLOCK is not set
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-CONFIG_MVSW61XX_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6123_61_65=y
-CONFIG_NET_DSA_MV88E6131=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_IRQCHIP=y
-CONFIG_ORION_TIMER=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_KIRKWOOD=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PLAT_ORION_LEGACY=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_QNAP is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_RFKILL_REGULATOR is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_SCHED_HRTICK=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_MULTI_LUN is not set
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_XZ is not set
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/kirkwood/patches-3.14/110-ib62x0.patch b/target/linux/kirkwood/patches-3.14/110-ib62x0.patch
deleted file mode 100644 (file)
index aae804a..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -118,13 +118,13 @@
-       };
-       partition@100000 {
--              label = "uImage";
--              reg = <0x0100000 0x600000>;
-+              label = "second stage u-boot";
-+              reg = <0x100000 0x200000>;
-       };
--      partition@700000 {
-+      partition@200000 {
-               label = "root";
--              reg = <0x0700000 0xf900000>;
-+              reg = <0x200000 0xfe00000>;
-       };
- };
diff --git a/target/linux/kirkwood/patches-3.14/120-iomega_ix2_200.patch b/target/linux/kirkwood/patches-3.14/120-iomega_ix2_200.patch
deleted file mode 100644 (file)
index 975e617..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -191,8 +191,8 @@
-       };
-       partition@400000 {
--              label = "uInitrd";
--              reg = <0x540000 0x1000000>;
-+              label = "rootfs";
-+              reg = <0x400000 0x1C00000>;
-       };
- };
diff --git a/target/linux/kirkwood/patches-3.14/130-iconnect.patch b/target/linux/kirkwood/patches-3.14/130-iconnect.patch
deleted file mode 100644 (file)
index ba5807e..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -154,28 +154,23 @@
-       status = "okay";
-       partition@0 {
--              label = "uboot";
--              reg = <0x0000000 0xc0000>;
-+              label = "u-boot";
-+              reg = <0x0000000 0xe0000>;
-       };
--      partition@a0000 {
--              label = "env";
--              reg = <0xa0000 0x20000>;
-+      partition@e0000 {
-+              label = "u-boot environment";
-+              reg = <0xe0000 0x100000>;
-       };
-       partition@100000 {
--              label = "zImage";
--              reg = <0x100000 0x300000>;
-+              label = "second stage u-boot";
-+              reg = <0x100000 0x200000>;
-       };
--      partition@540000 {
--              label = "initrd";
--              reg = <0x540000 0x300000>;
--      };
--
--      partition@980000 {
--              label = "boot";
--              reg = <0x980000 0x1f400000>;
-+      partition@200000 {
-+              label = "root";
-+              reg = <0x200000 0x1fe00000>;
-       };
- };
diff --git a/target/linux/kirkwood/patches-3.14/140-dockstar.patch b/target/linux/kirkwood/patches-3.14/140-dockstar.patch
deleted file mode 100644 (file)
index 21d04ba..0000000
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -76,18 +76,22 @@
-       partition@0 {
-               label = "u-boot";
--              reg = <0x0000000 0x100000>;
--              read-only;
-+              reg = <0x0000000 0xe0000>;
-+      };
-+
-+      partition@e0000 {
-+              label = "u-boot environment";
-+              reg = <0xe0000 0x100000>;
-       };
-       partition@100000 {
--              label = "uImage";
--              reg = <0x0100000 0x400000>;
-+              label = "second stage u-boot";
-+              reg = <0x100000 0x200000>;
-       };
--      partition@500000 {
--              label = "data";
--              reg = <0x0500000 0xfb00000>;
-+      partition@200000 {
-+              label = "root";
-+              reg = <0x200000 0xfe00000>;
-       };
- };
diff --git a/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.14/150-pogoplug_e02.patch
deleted file mode 100644 (file)
index 44b4c52..0000000
+++ /dev/null
@@ -1,127 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -112,6 +112,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
-       kirkwood-nsa310a.dtb \
-       kirkwood-openblocks_a6.dtb \
-       kirkwood-openblocks_a7.dtb \
-+      kirkwood-pogo_e02.dtb \
-       kirkwood-sheevaplug.dtb \
-       kirkwood-sheevaplug-esata.dtb \
-       kirkwood-topkick.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
-@@ -0,0 +1,114 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+      model = "Cloud Engines Pogoplug E02";
-+      compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+      memory {
-+              device_type = "memory";
-+              reg = <0x00000000 0x10000000>;
-+      };
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200n8 earlyprintk";
-+      };
-+
-+      ocp@f1000000 {
-+              pinctrl: pinctrl@10000 {
-+                      pmx_usb_power_enable: pmx-usb-power-enable {
-+                              marvell,pins = "mpp29";
-+                              marvell,function = "gpio";
-+                      };
-+                      pmx_led_green: pmx-led_green {
-+                              marvell,pins = "mpp48";
-+                              marvell,function = "gpio";
-+                      };
-+                      pmx_led_orange: pmx-led_orange {
-+                              marvell,pins = "mpp49";
-+                              marvell,function = "gpio";
-+                      };
-+              };
-+              serial@12000 {
-+                      status = "ok";
-+              };
-+      };
-+      gpio-leds {
-+              compatible = "gpio-leds";
-+              pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange
-+                            &pmx_led_green >;
-+              pinctrl-names = "default";
-+
-+              health {
-+                      label = "status:green:health";
-+                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+                      default-state = "keep";
-+              };
-+              fault {
-+                      label = "status:orange:fault";
-+                      gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+      regulators {
-+              compatible = "simple-bus";
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+              pinctrl-0 = <&pmx_usb_power_enable>;
-+              pinctrl-names = "default";
-+
-+              usb_power: regulator@1 {
-+                      compatible = "regulator-fixed";
-+                      reg = <1>;
-+                      regulator-name = "USB Power";
-+                      regulator-min-microvolt = <5000000>;
-+                      regulator-max-microvolt = <5000000>;
-+                      enable-active-high;
-+                      regulator-always-on;
-+                      regulator-boot-on;
-+                      gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+};
-+
-+&nand {
-+      chip-delay = <40>;
-+      status = "okay";
-+
-+      partition@0 {
-+              label = "u-boot";
-+              reg = <0x0000000 0x100000>;
-+              read-only;
-+      };
-+
-+      partition@100000 {
-+              label = "uImage";
-+              reg = <0x0100000 0x400000>;
-+      };
-+
-+      partition@500000 {
-+              label = "pogoplug";
-+              reg = <0x0500000 0x2000000>;
-+      };
-+
-+      partition@2500000 {
-+              label = "root";
-+              reg = <0x02500000 0x5b00000>;
-+      };
-+};
-+
-+&mdio {
-+      status = "okay";
-+
-+      ethphy0: ethernet-phy@0 {
-+              reg = <0>;
-+      };
-+};
-+
-+&eth0 {
-+      status = "okay";
-+      ethernet0-port@0 {
-+              phy-handle = <&ethphy0>;
-+      };
-+};
diff --git a/target/linux/kirkwood/patches-3.14/160-ea4500.patch b/target/linux/kirkwood/patches-3.14/160-ea4500.patch
deleted file mode 100644 (file)
index d1301df..0000000
+++ /dev/null
@@ -1,180 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
-       kirkwood-dns325.dtb \
-       kirkwood-dockstar.dtb \
-       kirkwood-dreamplug.dtb \
-+      kirkwood-ea4500.dtb \
-       kirkwood-goflexnet.dtb \
-       kirkwood-guruplug-server-plus.dtb \
-       kirkwood-ib62x0.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-ea4500.dts
-@@ -0,0 +1,167 @@
-+/*
-+ * kirkwood-ea4500.dts - Device Tree file for Linksys EA4500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+      model = "Linksys EA4500";
-+      compatible = "linksys,ea4500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+      memory {
-+              device_type = "memory";
-+              reg = <0x00000000 0x8000000>;
-+      };
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200n8 earlyprintk";
-+      };
-+
-+      mbus {
-+              pcie-controller {
-+                      status = "okay";
-+
-+                      pcie@1,0 {
-+                              status = "okay";
-+                      };
-+
-+                      pcie@2,0 {
-+                              status = "okay";
-+                      };
-+              };
-+      };
-+
-+      ocp@f1000000 {
-+              pinctrl: pinctrl@10000 {
-+                      pmx_led_white_health: pmx-led-white-health {
-+                              marvell,pins = "mpp7";
-+                              marvell,function = "gpo";
-+                      };
-+                      pmx_led_white_pulse: pmx-led-white-pulse {
-+                              marvell,pins = "mpp14";
-+                              marvell,function = "gpio";
-+                      };
-+                      pmx_btn_wps: pmx-btn-wps {
-+                              marvell,pins = "mpp47";
-+                              marvell,function = "gpio";
-+                      };
-+                      pmx_btn_reset: pmx-btn-reset {
-+                              marvell,pins = "mpp48";
-+                              marvell,function = "gpio";
-+                      };
-+              };
-+
-+              rtc@10300 {
-+                      status = "disabled";
-+              };
-+
-+              serial@12000 {
-+                      status = "okay";
-+              };
-+
-+      };
-+
-+      gpio_keys {
-+              compatible = "gpio-keys";
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+              pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+              pinctrl-names = "default";
-+
-+              button@15 {
-+                      label = "WPS Button";
-+                      linux,code = <KEY_WPS_BUTTON>;
-+                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              button@16 {
-+                      label = "Reset Button";
-+                      linux,code = <KEY_RESTART>;
-+                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+
-+      gpio-leds {
-+              compatible = "gpio-leds";
-+              pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
-+              pinctrl-names = "default";
-+
-+              white-health {
-+                      label = "ea4500:white:health";
-+                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+              };
-+
-+              white-pulse {
-+                      label = "ea4500:white:pulse";
-+                      gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+
-+      mvsw61xx {
-+              compatible = "marvell,88e6171";
-+              status = "okay";
-+              reg = <0x10>;
-+
-+              mii-bus = <&mdio>;
-+              cpu-port-0 = <5>;
-+              cpu-port-1 = <6>;
-+              is-indirect;
-+      };
-+};
-+
-+&nand {
-+      status = "okay";
-+      pinctrl-0 = <&pmx_nand>;
-+      pinctrl-names = "default";
-+
-+      partition@0 {
-+              label = "u-boot";
-+              reg = <0x0000000 0x80000>;
-+      };
-+
-+      partition@80000 {
-+              label = "u-boot environment";
-+              reg = <0x80000 0x20000>;
-+      };
-+
-+      partition@200000 {
-+              label = "kernel";
-+              reg = <0x200000 0x200000>;
-+      };
-+
-+      partition@400000 {
-+              label = "root";
-+              reg = <0x400000 0x1c00000>;
-+      };
-+};
-+
-+&mdio {
-+      status = "okay";
-+};
-+
-+&eth0 {
-+      status = "okay";
-+      ethernet0-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
-+};
-+
-+&eth1 {
-+      status = "okay";
-+      ethernet1-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
-+};
diff --git a/target/linux/kirkwood/patches-3.14/170-ea3500.patch b/target/linux/kirkwood/patches-3.14/170-ea3500.patch
deleted file mode 100644 (file)
index 58e7a1f..0000000
+++ /dev/null
@@ -1,173 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -90,6 +90,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
-       kirkwood-dns325.dtb \
-       kirkwood-dockstar.dtb \
-       kirkwood-dreamplug.dtb \
-+      kirkwood-ea3500.dtb \
-       kirkwood-ea4500.dtb \
-       kirkwood-goflexnet.dtb \
-       kirkwood-guruplug-server-plus.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-ea3500.dts
-@@ -0,0 +1,160 @@
-+/*
-+ * kirkwood-ea3500.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+      model = "Linksys EA3500";
-+      compatible = "linksys,ea3500", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+      memory {
-+              device_type = "memory";
-+              reg = <0x00000000 0x4000000>;
-+      };
-+
-+      chosen {
-+              bootargs = "console=ttyS0,115200n8 earlyprintk";
-+      };
-+
-+      mbus {
-+              pcie-controller {
-+                      status = "okay";
-+
-+                      pcie@1,0 {
-+                              status = "okay";
-+                      };
-+
-+                      pcie@2,0 {
-+                              status = "okay";
-+                      };
-+              };
-+      };
-+
-+      ocp@f1000000 {
-+              pinctrl: pinctrl@10000 {
-+                      pmx_led_green_power: pmx-led-green-power {
-+                              marvell,pins = "mpp7";
-+                              marvell,function = "gpo";
-+                      };
-+                      pmx_btn_wps: pmx-btn-wps {
-+                              marvell,pins = "mpp47";
-+                              marvell,function = "gpio";
-+                      };
-+                      pmx_btn_reset: pmx-btn-reset {
-+                              marvell,pins = "mpp48";
-+                              marvell,function = "gpio";
-+                      };
-+              };
-+
-+              rtc@10300 {
-+                      status = "disabled";
-+              };
-+
-+              serial@12000 {
-+                      status = "okay";
-+              };
-+
-+      };
-+
-+      gpio_keys {
-+              compatible = "gpio-keys";
-+              #address-cells = <1>;
-+              #size-cells = <0>;
-+              pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+              pinctrl-names = "default";
-+
-+              button@15 {
-+                      label = "WPS Button";
-+                      linux,code = <KEY_WPS_BUTTON>;
-+                      gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+              };
-+
-+              button@16 {
-+                      label = "Reset Button";
-+                      linux,code = <KEY_RESTART>;
-+                      gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+              };
-+      };
-+
-+      gpio-leds {
-+              compatible = "gpio-leds";
-+              pinctrl-0 = < &pmx_led_green_power >;
-+              pinctrl-names = "default";
-+
-+              green-power {
-+                      label = "ea3500:green:power";
-+                      gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+              };
-+      };
-+
-+      mvsw61xx {
-+              compatible = "marvell,88e6171";
-+              status = "okay";
-+              reg = <0x10>;
-+
-+              mii-bus = <&mdio>;
-+              cpu-port-0 = <5>;
-+              cpu-port-1 = <6>;
-+              is-indirect;
-+      };
-+};
-+
-+&nand {
-+      status = "okay";
-+      pinctrl-0 = <&pmx_nand>;
-+      pinctrl-names = "default";
-+
-+      partition@0 {
-+              label = "u-boot";
-+              reg = <0x0000000 0x80000>;
-+              read-only;
-+      };
-+
-+      partition@80000 {
-+              label = "u-boot environment";
-+              reg = <0x80000 0x20000>;
-+      };
-+
-+      partition@200000 {
-+              label = "kernel";
-+              reg = <0x200000 0x200000>;
-+      };
-+
-+      partition@400000 {
-+              label = "root";
-+              reg = <0x400000 0x1200000>;
-+      };
-+};
-+
-+&mdio {
-+      status = "okay";
-+};
-+
-+&eth0 {
-+      status = "okay";
-+      ethernet0-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
-+};
-+
-+&eth1 {
-+      status = "okay";
-+      ethernet1-port@0 {
-+              speed = <1000>;
-+              duplex = <1>;
-+      };
-+};
diff --git a/target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch b/target/linux/kirkwood/patches-3.14/171-ix2_200_poweroff.patch
deleted file mode 100644 (file)
index 62f244c..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -168,6 +168,10 @@
-                       gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
-               };
-       };
-+      gpio-poweroff {
-+              compatible = "gpio-poweroff";
-+              gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
-+      };
- };
- &nand {