+++ /dev/null
-# The "checkoutlist" file is used to support additional version controlled
-# administrative files in $CVSROOT/CVSROOT, such as template files.
-#
-# The first entry on a line is a filename which will be checked out from
-# the corresponding RCS file in the $CVSROOT/CVSROOT directory.
-# The remainder of the line is an error message to use if the file cannot
-# be checked out.
-#
-# File format:
-#
-# [<whitespace>]<filename><whitespace><error message><end-of-line>
-#
-# comment lines begin with '#'
+++ /dev/null
-#!/usr/bin/perl -w
-#
-# ciabot -- Mail a CVS log message to a given address, for the purposes of CIA
-#
-# Loosely based on cvslog by Russ Allbery <rra@stanford.edu>
-# Copyright 1998 Board of Trustees, Leland Stanford Jr. University
-#
-# Copyright 2001, 2003, 2004 Petr Baudis <pasky@ucw.cz>
-#
-# This program is free software; you can redistribute it and/or modify it under
-# the terms of the GNU General Public License version 2, as published by the
-# Free Software Foundation.
-#
-# The master location of this file is
-# http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl.
-#
-# This program is designed to run from the loginfo CVS administration file. It
-# takes a log message, massaging it and mailing it to the address given below.
-#
-# Its record in the loginfo file should look like:
-#
-# ALL $CVSROOT/CVSROOT/ciabot.pl %s $USER project from_email dest_email ignore_regexp
-#
-# Note that the last four parameters are optional, you can alternatively change
-# the defaults below in the configuration section.
-#
-# If it does not work, try to disable $xml_rpc in the configuration section
-# below.
-#
-# ciabot.pl,v 1.110 2004/01/09 17:40:13 pasky
-# $Id$
-
-use strict;
-use vars qw ($project $from_email $dest_email $rpc_uri $sendmail $sync_delay
- $xml_rpc $ignore_regexp $alt_local_message_target);
-
-
-
-
-### Configuration
-
-# Project name (as known to CIA).
-$project = 'ELinks';
-
-# The from address in generated mails.
-$from_email = 'pasky@ucw.cz';
-
-# Mail all reports to this address.
-$dest_email = 'cia@navi.cx';
-
-# If using XML-RPC, connect to this URI.
-$rpc_uri = 'http://cia.navi.cx/RPC2';
-
-# Path to your USCD sendmail compatible binary (your mailer daemon created this
-# program somewhere).
-$sendmail = '/usr/sbin/sendmail';
-
-# Number of seconds to wait for possible concurrent instances. CVS calls up
-# this script for each involved directory separately and this is the sync
-# delay. 5s looks as a safe value, but feel free to increase if you are running
-# this on a slower (or overloaded) machine or if you have really a lot of
-# directories.
-$sync_delay = 5;
-
-# This script can communicate with CIA either by mail or by an XML-RPC
-# interface. The XML-RPC interface is faster and more efficient, however you
-# need to have RPC::XML perl module installed, and some large CVS hosting sites
-# (like Savannah or Sourceforge) might not allow outgoing HTTP connections
-# while they allow outgoing mail. Also, this script will hang and eventually
-# not deliver the event at all if CIA server happens to be down, which is
-# unfortunately not an uncommon condition.
-$xml_rpc = 0;
-
-# You can make this bot to totally ignore events concerning the objects
-# specified below. Each object is composed of <module>/<path>/<filename>,
-# therefore file Manifest in root directory of module gentoo will be called
-# "gentoo/Manifest", while file src/bfu/inphist.c of module elinks will be
-# called "elinks/src/bfu/inphist.c". Easy, isn't it?
-#
-# This variable should contain regexp, against which will each object be
-# checked, and if the regexp is matched, the file is ignored. Therefore ie. to
-# ignore all changes in the two files above and everything concerning module
-# 'admin', use:
-#
-#$ignore_regexp = "^(gentoo/Manifest|elinks/src/bfu/inphist.c|admin/)";
-$ignore_regexp = "/Manifest\$";
-
-# It can be useful to also grab the generated XML message by some other
-# programs and ie. autogenerate some content based on it. Here you can specify
-# a file to which it will be appended.
-$alt_local_message_target = "";
-
-
-
-
-### The code itself
-
-use vars qw ($user $module $tag @files $logmsg $message);
-
-my @dir; # This array stores all the affected directories
-my @dirfiles; # This array is mapped to the @dir array and contains files
- # affected in each directory
-
-
-
-### Input data loading
-
-
-# These arguments are from %s; first the relative path in the repository
-# and then the list of files modified.
-
-@files = split (' ', ($ARGV[0] or ''));
-$dir[0] = shift @files or die "$0: no directory specified\n";
-$dirfiles[0] = "@files" or die "$0: no files specified\n";
-
-
-# Guess module name.
-
-$module = $dir[0]; $module =~ s#/.*##;
-
-
-# Figure out who is doing the update.
-
-$user = $ARGV[1];
-
-
-# Use the optional parameters, if supplied.
-
-$project = $ARGV[2] if $ARGV[2];
-$from_email = $ARGV[3] if $ARGV[3];
-$dest_email = $ARGV[4] if $ARGV[4];
-$ignore_regexp = $ARGV[5] if $ARGV[5];
-
-
-# Parse stdin (what's interesting is the tag and log message)
-
-while (<STDIN>) {
- $tag = $1 if /^\s*Tag: ([a-zA-Z0-9_-]+)/;
- last if /^Log Message/;
-}
-
-while (<STDIN>) {
- next unless ($_ and $_ ne "\n" and $_ ne "\r\n");
- s/&/&/g;
- s/</</g;
- s/>/>/g;
- $logmsg .= $_;
-}
-
-
-
-### Remove to-be-ignored files
-
-$dirfiles[0] = join (' ',
- grep {
- my $f = "$module/$dir[0]/$_";
- $f !~ m/$ignore_regexp/;
- } split (/\s+/, $dirfiles[0])
-) if ($ignore_regexp);
-exit unless $dirfiles[0];
-
-
-
-### Sync between the multiple instances potentially being ran simultanously
-
-my $sum; # _VERY_ simple hash of the log message. It is really weak, but I'm
- # lazy and it's really sorta exceptional to even get more commits
- # running simultanously anyway.
-map { $sum += ord $_ } split(//, $logmsg);
-
-my $syncfile; # Name of the file used for syncing
-$syncfile = "/tmp/cvscia.$project.$module.$sum";
-
-
-if (-f $syncfile and -w $syncfile) {
- # The synchronization file for this file already exists, so we are not the
- # first ones. So let's just dump what we know and exit.
-
- open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
- print FF "$dirfiles[0]!@!$dir[0]\n";
- close(FF);
- exit;
-
-} else {
- # We are the first one! Thus, we'll fork, exit the original instance, and
- # wait a bit with the new one. Then we'll grab what the others collected and
- # go on.
-
- # We don't need to care about permissions since all the instances of the one
- # commit will obviously live as the same user.
-
- # system("touch") in a different way
- open(FF, ">>$syncfile") or die "aieee... can't log, can't log! $syncfile blocked!";
- close(FF);
-
- exit if (fork);
- sleep($sync_delay);
-
- open(FF, $syncfile);
- my ($dirnum) = 1; # 0 is the one we got triggerred for
- while (<FF>) {
- chomp;
- ($dirfiles[$dirnum], $dir[$dirnum]) = split(/!@!/);
- $dirnum++;
- }
- close(FF);
-
- unlink($syncfile);
-}
-
-
-
-### Compose the mail message
-
-
-my ($VERSION) = '$Revision$' =~ / (\d+\.\d+) /;
-my $ts = time;
-
-$message = <<EM
-<message>
- <generator>
- <name>CIA Perl client for CVS</name>
- <version>$VERSION</version>
- <url>http://pasky.or.cz/~pasky/dev/cvs/ciabot.pl</url>
- </generator>
- <source>
- <project>$project</project>
- <module>$module</module>
-EM
-;
-$message .= " <branch>$tag</branch>" if ($tag);
-$message .= <<EM
- </source>
- <timestamp>
- $ts
- </timestamp>
- <body>
- <commit>
- <author>$user</author>
- <files>
-EM
-;
-
-for (my $dirnum = 0; $dirnum < @dir; $dirnum++) {
- map {
- $_ = $dir[$dirnum] . '/' . $_;
- s#^.*?/##; # weed out the module name
- s/&/&/g;
- s/</</g;
- s/>/>/g;
- $message .= " <file>$_</file>\n";
- } split(/ /, $dirfiles[$dirnum]);
-}
-
-$message .= <<EM
- </files>
- <log>
-$logmsg
- </log>
- </commit>
- </body>
-</message>
-EM
-;
-
-
-
-### Write the message to an alt-target
-
-if ($alt_local_message_target and open (ALT, ">>$alt_local_message_target")) {
- print ALT $message;
- close ALT;
-}
-
-
-
-### Send out the XML-RPC message
-
-
-if ($xml_rpc) {
- # We gotta be careful from now on. We silence all the warnings because
- # RPC::XML code is crappy and works with undefs etc.
- $^W = 0;
- $RPC::XML::ERROR if (0); # silence perl's compile-time warning
-
- require RPC::XML;
- require RPC::XML::Client;
-
- my $rpc_client = new RPC::XML::Client $rpc_uri;
- my $rpc_request = RPC::XML::request->new('hub.deliver', $message);
- my $rpc_response = $rpc_client->send_request($rpc_request);
-
- unless (ref $rpc_response) {
- die "XML-RPC Error: $RPC::XML::ERROR\n";
- }
- exit;
-}
-
-
-
-### Send out the mail
-
-
-# Open our mail program
-
-open (MAIL, "| $sendmail -t -oi -oem") or die "Cannot execute $sendmail : " . ($?>>8);
-
-
-# The mail header
-
-print MAIL <<EOM;
-From: $from_email
-To: $dest_email
-Content-type: text/xml
-Subject: DeliverXML
-
-EOM
-
-print MAIL $message;
-
-
-# Close the mail
-
-close MAIL;
-die "$0: sendmail exit status " . ($? >> 8) . "\n" unless ($? == 0);
-
-# vi: set sw=2:
+++ /dev/null
-# The "commitinfo" file is used to control pre-commit checks.
-# The filter on the right is invoked with the repository and a list
-# of files to check. A non-zero exit of the filter program will
-# cause the commit to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
+++ /dev/null
-# Set this to "no" if pserver shouldn't check system users/passwords
-#SystemAuth=no
-
-# Put CVS lock files in this directory rather than directly in the repository.
-#LockDir=/var/lock/cvs
-
-# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top
-# level of the new working directory when using the `cvs checkout'
-# command.
-#TopLevelAdmin=no
-
-# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the
-# history file, or a subset as needed (ie `TMAR' logs all write operations)
-#LogHistory=TOFEWGCMAR
+++ /dev/null
-# This file affects handling of files based on their names.
-#
-# The -t/-f options allow one to treat directories of files
-# as a single file, or to transform a file in other ways on
-# its way in and out of CVS.
-#
-# The -m option specifies whether CVS attempts to merge files.
-#
-# The -k option specifies keyword expansion (e.g. -kb for binary).
-#
-# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers)
-#
-# wildcard [option value][option value]...
-#
-# where option is one of
-# -f from cvs filter value: path to filter
-# -t to cvs filter value: path to filter
-# -m update methodology value: MERGE or COPY
-# -k expansion mode value: b, o, kkv, &c
-#
-# and value is a single-quote delimited value.
-# For example:
-#*.gif -k 'b'
+++ /dev/null
-# The "editinfo" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
+++ /dev/null
-# The "loginfo" file controls where "cvs commit" log information
-# is sent. The first entry on a line is a regular expression which must match
-# the directory that the change is being made to, relative to the
-# $CVSROOT. If a match is found, then the remainder of the line is a filter
-# program that should expect log information on its standard input.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name ALL appears as a regular expression it is always used
-# in addition to the first matching regex or DEFAULT.
-#
-# You may specify a format string as part of the
-# filter. The string is composed of a `%' followed
-# by a single format character, or followed by a set of format
-# characters surrounded by `{' and `}' as separators. The format
-# characters are:
-#
-# s = file name
-# V = old version number (pre-checkin)
-# v = new version number (post-checkin)
-#
-# For example:
-#DEFAULT (echo ""; id; echo %s; date; cat) >> $CVSROOT/CVSROOT/commitlog
-# or
-#DEFAULT (echo ""; id; echo %{sVv}; date; cat) >> $CVSROOT/CVSROOT/commitlog
-
-#^buildroot ( $CVSROOT/CVSROOT/ciabot.pl %s $USER openwrt cvs-commits@openwrt.ksilebo.net cia@navi.cx )
-#^root ( $CVSROOT/CVSROOT/ciabot.pl %s $USER openwrt cvs-commits@openwrt.ksilebo.net cia@navi.cx )
+++ /dev/null
-# Three different line formats are valid:
-# key -a aliases...
-# key [options] directory
-# key [options] directory files...
-#
-# Where "options" are composed of:
-# -i prog Run "prog" on "cvs commit" from top-level of module.
-# -o prog Run "prog" on "cvs checkout" of module.
-# -e prog Run "prog" on "cvs export" of module.
-# -t prog Run "prog" on "cvs rtag" of module.
-# -u prog Run "prog" on "cvs update" of module.
-# -d dir Place module in directory "dir" instead of module name.
-# -l Top-level directory only -- do not recurse.
-#
-# NOTE: If you change any of the "Run" options above, you'll have to
-# release and re-checkout any working directories of these modules.
-#
-# And "directory" is a path to a directory relative to $CVSROOT.
-#
-# The "-a" option specifies an alias. An alias is interpreted as if
-# everything on the right of the "-a" had been typed on the command line.
-#
-# You can encode a module within a module by using the special '&'
-# character to interpose another module into the current module. This
-# can be useful for creating a module that consists of many directories
-# spread out over the entire source repository.
+++ /dev/null
-# The "notify" file controls where notifications from watches set by
-# "cvs watch add" or "cvs edit" are sent. The first entry on a line is
-# a regular expression which is tested against the directory that the
-# change is being made to, relative to the $CVSROOT. If it matches,
-# then the remainder of the line is a filter program that should contain
-# one occurrence of %s for the user to notify, and information on its
-# standard input.
-#
-# "ALL" or "DEFAULT" can be used in place of the regular expression.
-#
-# For example:
-#ALL mail %s -s "CVS notification"
+++ /dev/null
-# The "rcsinfo" file is used to control templates with which the editor
-# is invoked on commit and import.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being made to, relative to the
-# $CVSROOT. For the first match that is found, then the remainder of the
-# line is the name of the file that contains the template.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
+++ /dev/null
-# The "taginfo" file is used to control pre-tag checks.
-# The filter on the right is invoked with the following arguments:
-#
-# $1 -- tagname
-# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d
-# $3 -- repository
-# $4-> file revision [file revision ...]
-#
-# A non-zero exit of the filter program will cause the tag to be aborted.
-#
-# The first entry on a line is a regular expression which is tested
-# against the directory that the change is being committed to, relative
-# to the $CVSROOT. For the first match that is found, then the remainder
-# of the line is the name of the filter to run.
-#
-# If the repository name does not match any of the regular expressions in this
-# file, the "DEFAULT" line is used, if it is specified.
-#
-# If the name "ALL" appears as a regular expression it is always used
-# in addition to the first matching regex or "DEFAULT".
+++ /dev/null
-# The "verifymsg" file is used to allow verification of logging
-# information. It works best when a template (as specified in the
-# rcsinfo file) is provided for the logging procedure. Given a
-# template with locations for, a bug-id number, a list of people who
-# reviewed the code before it can be checked in, and an external
-# process to catalog the differences that were code reviewed, the
-# following test can be applied to the code:
-#
-# Making sure that the entered bug-id number is correct.
-# Validating that the code that was reviewed is indeed the code being
-# checked in (using the bug-id number or a seperate review
-# number to identify this particular code set.).
-#
-# If any of the above test failed, then the commit would be aborted.
-#
-# Actions such as mailing a copy of the report to each reviewer are
-# better handled by an entry in the loginfo file.
-#
-# One thing that should be noted is the the ALL keyword is not
-# supported. There can be only one entry that matches a given
-# repository.
+++ /dev/null
-UMlinux
-root_fs*
-build_*
-toolchain_build_*
+++ /dev/null
-# Makefile for a simple busybox/uClibc root filesystem
-#
-# Copyright (C) 2001-2004 Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-
-#############################################################
-#
-# EDIT this stuff to suit your system and preferences
-#
-# Use := when possible to get precomputation, thereby
-# speeding up the build process.
-#
-#############################################################
-
-SNAPSHOT:=20050101
-
-ARCH:=mipsel
-#USE_UCLIBC_SNAPSHOT:=$(SNAPSHOT)
-USE_UCLIBC_LDSO_0_9_24:=false
-#USE_BUSYBOX_SNAPSHOT:=$(SNAPSHOT)
-USE_NETFILTER_SNAPSHOT:=20041009
-USE_BRIDGE_VERSION:=1.0.4
-BUILD_WITH_LARGEFILE:=true
-
-OPTIMIZE_FOR_CPU=$(ARCH)
-
-# Command used to download source code
-WGET:=wget --passive-ftp
-
-# Soft floating point options.
-# Notes:
-# Currently builds with gcc 3.3 for arm, mips, mipsel, powerpc.
-# (i386 support will be added back in at some point.)
-# Only tested with multilib enabled.
-# For i386, long double is the same as double (64 bits). While this
-# is unusual for x86, it seemed the best approach considering the
-# limitations in the gcc floating point emulation library.
-# For arm, soft float uses the usual libfloat routines.
-# Custom specs files are used to set the default gcc mode to soft float
-# as a convenience, since you shouldn't link hard and soft float
-# together. In fact, arm won't even let you.
-# (Un)comment the appropriate line below.
-#SOFT_FLOAT:=true
-SOFT_FLOAT:=false
-
-TARGET_OPTIMIZATION=-Os -mips2
-TARGET_DEBUGGING= #-g
-
-# Currently the unwind stuff seems to work for staticly linked apps but
-# not dynamic. So use setjmp/longjmp exceptions by default.
-# GCC_USE_SJLJ_EXCEPTIONS:=--enable-sjlj-exceptions
-GCC_USE_SJLJ_EXCEPTIONS:=
-
-# Any additional gcc options you may want to include....
-EXTRA_GCC_CONFIG_OPTIONS:=
-
-# Enable the following if you want locale/gettext/i18n support.
-# NOTE! Currently the pregnerated locale stuff only works for x86!
-#ENABLE_LOCALE:=true
-ENABLE_LOCALE:=false
-
-# If you want multilib enabled, enable this...
-MULTILIB:=--enable-multilib
-
-# Build/install c++ compiler and libstdc++?
-#INSTALL_LIBSTDCPP:=true
-INSTALL_LIBSTDCPP:=false
-
-# Build/install java compiler and libgcj? (requires c++)
-# WARNING!!! DOES NOT BUILD FOR TARGET WITHOUT INTERVENTION!!! mjn3
-#INSTALL_LIBGCJ:=true
-INSTALL_LIBGCJ:=false
-
-# For SMP machines some stuff can be run in parallel
-#JLEVEL=-j3
-
-#############################################################
-#
-# The list of stuff to build for the target filesystem
-#
-#############################################################
-TARGETS:=host-sed openwrt-code.bin
-
-PACKAGES:=oidentd iproute2 kmod-sched wshaper zlib openssl openssh pppoecd dropbear chillispot dhcp-fwd ip6tables kmod-ipt6 kmod-ipv6 kmod-nfs kmod-ppp-async kmod-ppp-mppe-mppc ppp pppoecd pptp-server kmod-tun fprobe libpcap libpthread pptp-client vsftpd matrixssl ntpclient radvd strace
-
-#############################################################
-#
-# You should probably leave this stuff alone unless you know
-# what you are doing.
-#
-#############################################################
-
-ifeq ($(SOFT_FLOAT),true)
-SOFT_FLOAT_CONFIG_OPTION:=--without-float
-TARGET_SOFT_FLOAT:=-msoft-float
-ARCH_FPU_SUFFIX:=_nofpu
-else
-SOFT_FLOAT_CONFIG_OPTION:=
-TARGET_SOFT_FLOAT:=
-ARCH_FPU_SUFFIX:=
-endif
-
-ifeq ($(INSTALL_LIBGCJ),true)
-INSTALL_LIBSTDCPP:=true
-endif
-
-# WARNING -- uClibc currently disables large file support on cris.
-ifeq ("$(strip $(ARCH))","cris")
-BUILD_WITH_LARGEFILE:=false
-endif
-
-ifneq ($(BUILD_WITH_LARGEFILE),true)
-DISABLE_LARGEFILE= --disable-largefile
-endif
-TARGET_CFLAGS=$(TARGET_OPTIMIZATION) $(TARGET_DEBUGGING)
-
-HOSTCC:=gcc
-BASE_DIR:=${shell pwd}
-SOURCE_DIR:=$(BASE_DIR)/sources
-DL_DIR:=$(SOURCE_DIR)/dl
-PATCH_DIR=$(SOURCE_DIR)/patches
-BUILD_DIR:=$(BASE_DIR)/build_$(ARCH)$(ARCH_FPU_SUFFIX)
-TARGET_DIR:=$(BUILD_DIR)/root
-STAGING_DIR=$(BUILD_DIR)/staging_dir
-TOOL_BUILD_DIR=$(BASE_DIR)/toolchain_build_$(ARCH)$(ARCH_FPU_SUFFIX)
-TARGET_PATH=$(STAGING_DIR)/bin:/bin:/sbin:/usr/bin:/usr/sbin
-IMAGE:=$(BASE_DIR)/root_fs_$(ARCH)$(ARCH_FPU_SUFFIX)
-REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux-uclibc
-GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-linux
-KERNEL_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
-TARGET_CROSS=$(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-
-TARGET_CC=$(TARGET_CROSS)gcc
-#STRIP=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded
-STRIP=$(STAGING_DIR)/bin/sstrip
-
-HOST_ARCH:=$(shell $(HOSTCC) -dumpmachine | sed -e s'/-.*//' \
- -e 's/sparc.*/sparc/' \
- -e 's/arm.*/arm/g' \
- -e 's/m68k.*/m68k/' \
- -e 's/ppc/powerpc/g' \
- -e 's/v850.*/v850/g' \
- -e 's/sh[234]/sh/' \
- -e 's/mips-.*/mips/' \
- -e 's/mipsel-.*/mipsel/' \
- -e 's/cris.*/cris/' \
- -e 's/i[3-9]86/i386/' \
- )
-GNU_HOST_NAME:=$(HOST_ARCH)-pc-linux-gnu
-TARGET_CONFIGURE_OPTS=PATH=$(TARGET_PATH) \
- AR=$(TARGET_CROSS)ar \
- AS=$(TARGET_CROSS)as \
- LD=$(TARGET_CROSS)ld \
- NM=$(TARGET_CROSS)nm \
- CC=$(TARGET_CROSS)gcc \
- GCC=$(TARGET_CROSS)gcc \
- CXX=$(TARGET_CROSS)g++ \
- RANLIB=$(TARGET_CROSS)ranlib
-
-ifeq ($(ENABLE_LOCALE),true)
-DISABLE_NLS:=
-else
-DISABLE_NLS:=--disable-nls
-endif
-
-all: world
-
-TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
-TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
-TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
-
-
-PACKAGES_IPK:=$(patsubst %,%-ipk,$(PACKAGES))
-OPENWRT_IPK_DIR=$(SOURCE_DIR)/openwrt/ipkg
-
-world: $(DL_DIR) $(TARGETS_SOURCE) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) $(TARGETS)
- @echo "ALL DONE."
-
-packages: ipkg-utils $(PACKAGES_IPK)
- -@mkdir -p $(BASE_DIR)/packages
- { \
- cd $(BASE_DIR)/packages; \
- mv $(BUILD_DIR)/*.ipk .; \
- $(IPKG_MAKE_INDEX) . > Packages; \
- }
- @echo "ALL DONE."
-
-.PHONY: all world clean dirclean distclean source $(TARGETS) \
- $(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE)
-
-include make/*.mk
-
-#############################################################
-#
-# staging and target directories do NOT list these as
-# dependancies anywhere else
-#
-#############################################################
-$(DL_DIR):
- mkdir $(DL_DIR)
-
-$(BUILD_DIR):
- mkdir $(BUILD_DIR)
-
-$(STAGING_DIR):
- rm -rf $(STAGING_DIR)
- mkdir -p $(STAGING_DIR)/lib
- mkdir -p $(STAGING_DIR)/usr
- ln -fs $(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/include
- ln -fs ../lib $(STAGING_DIR)/usr/lib
- ln -fs ../$(REAL_GNU_TARGET_NAME)/include $(STAGING_DIR)/usr/include
-
-
-$(TARGET_DIR):
- rm -rf $(TARGET_DIR)
- cp -a $(SOURCE_DIR)/openwrt/root/ $(TARGET_DIR)
- -find $(TARGET_DIR) -type d -name CVS -exec rm -rf {} \; > /dev/null 2>&1
-
-source: $(TARGETS_SOURCE)
-
-#############################################################
-#
-# Cleanup and misc junk
-#
-#############################################################
-clean:
- rm -rf $(TOOL_BUILD_DIR) $(BUILD_DIR) $(IMAGE) \
- $(BASE_DIR)/packages \
- openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
- openwrt-kmodules.tar.bz2
-
-dirclean: $(TARGETS_DIRCLEAN)
- rm -rf $(TARGET_DIR) $(STAGING_DIR) $(IMAGE) \
- $(BASE_DIR)/packages \
- openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
- openwrt-kmodules.tar.bz2
-
-distclean:
- rm -rf $(DL_DIR) $(BUILD_DIR) $(LINUX_KERNEL) $(IMAGE) \
- openwrt-linux.trx openwrt-g-code.bin openwrt-gs-code.bin \
- openwrt-kmodules.tar.bz2
-
-sourceball:
- rm -rf $(BUILD_DIR)
- set -e; \
- cd ..; \
- rm -f buildroot.tar.bz2; \
- tar -cvf buildroot.tar buildroot; \
- bzip2 -9 buildroot.tar; \
+++ /dev/null
-This is a modified uClibc buildroot, customized to build OpenWRT.
-
-If you already have the linksys tarball (check make/openwrt.mk for the
-version used), then move/copy/symlink it into sources/dl. At the
-moment (2004/03/05) I'm using wrt54gv2.2.02.2.tgz.
-
-Simply running 'make' will build openwrt-code.bin and a tarball of
-the kernel modules. Customizations of the kernel, uClibc, and busybox
-are possible by modifying the appropriate config files in source.
-Copies of the stock openwrt Makefile, uClibc.config, busybox.config,
-are included with a '-openwrt' suffix.
-
-Remember that different configurations of uClibc may not be binary
-compatible. Also, uClibc is not necessarily binary compatible between
-versions. In particular, dynamicly linked applications and libraries
-built with the linksys/broadcom toolchain are NOT binary compatible
-with current uClibc.
-
-Manuel Novoa III
-mjn3@codepoet.org
-
-
-2004/03/16 Added patch to support boardtype of bcm94710ap.
- Updated resetmon patch as per mbm.
- Set busybox and uClibc snapshots to known good versions.
-
-2004/03/30 Switch to wrt54gs.2.07.1.tgz as the base tarball.
- Start grabbing the (updated) root skeleton from openwrt cvs.
- Add busybox applets: passwd and nameif.
- Update snapshots of buildroot, uClibc, and busybox.
- Fix broken /var symlink.
-
-2004/03/31 Replace diag_led.c with mbm's rewrite.
- Create code.bin files for both 'G' and 'GS' units.
- Update busybox for sed fix.
-
-2004/05/08 Add busybox applets: chown, chgrp, lsmod, sysctl
- Remove: ipaddr, iplink, iproute
- Update snapshots of buildroot, uClibc, busybox, netfilter.
-
-.. more changes as yet undocumented ..
+++ /dev/null
-OPENWRT PPPOECD NOTES
-=====================
-
-1. GENERAL
-----------
-
-This package is used to estabilish basic connection to the
-Internet via DSL/ADSL modems. This is also known as the
-PPPoE or PPP-over-Ethernet connection.
-
-The PPPOECD program included in the OpenWrt distribution is a
-modified version of the PPPOECD that is present in the original
-Linksys firmware.
-
-This modified version is directly supported by the OpenWrt
-startup scripts.
-
-2. BUILDING
------------
-
-If you have a pre-compiled PPPOECD package, skip this section.
-
-PPPOECD can be built in two ways. As an integrated part
-of the OpenWrt FLASH image or as an .ipk package that can
-be installed separately.
-
-To build PPPOECD as an embedded component, add "pppoecd" to the
-TARGETS variable in the main OpenWrt Makefile before the
-"openwrt-bin" value.
-
-To build as a standalone package, add "pppoecd" to the
-PACKAGES variable in the main OpenWrt Makefile.
-
-3. NVRAM variables
-------------------
-
-In order for the PPPoE link to be established by the networking
-scripts the following NVRAM variables must be present:
-
-wan_ifname Should be set to: ppp0
-
-wan_proto Should be set to: pppoe
-
-pppoe_ifname Set it to the WAN interface on which the PPPoE
- is to function. On a 2.0 or a GS model it is
- usually vlan1. The 1.0 and 1.1 models used vlan2.
-
-ppp_username User name for your PPPoE connection.
-
-ppp_passwd Password for the connection.
-
-ppp_redialperiod Time between reconnect attempts.
- Usualy set to 30.
-
-ppp_idletime Time the link has to stay dead before reconnecting.
- Usually set to 5.
-
-wan_mtu The Maxumum Transfer Unit for the PPPoE connection.
- Typically 1492.
-
-Please consult the OpenWrt WIKI or the forum for more
-information on NVRAM variables.
-
-
-4. STARTUP / SHUTDOWN
----------------------
-
-OpenWrt will attempt to connect using PPPOECD when starting up.
-The script responsible for that is /etc/init.d/S40network.
-
-You can also manually start the PPPOECD by doing:
-
- ifup wan
-
-Similarly you can shutdown the PPPOECD by doing:
-
- ifdown wan
-
-
-5. CONFIGURATION
-----------------
-
-PPPoE firewall configuration is the standard OpenWrt configuration
-in /etc/init.d/S45firewall that applies to all the other types
-of connections to the Internet.
-
-Additional actions can be performed when connecting or disconnecting
-by modifying "ip-up" and "ip-down" scripts in the /etc/ppp directory.
-
-When connecting, PPPOECD creates /tmp/resolv.conf file that contains
-DNS server entries as supplied by the ISP. The standard ip-up
-script will also add a default route leading via the PPPoE link.
-
-6. DIFFERENCES FROM THE ORIGINAL PPPOECD
-----------------------------------------
-
-The main difference is the location of files. Original Linksys
-PPPOECD operated almost exclusively in the /tmp/ppp directory. This
-however prevents any persistent configuration of the program via
-ip-up or ip-down scripts. Also the program itself was located in
-/usr/sbin whereas OpenWrt scripts expect it to be in /sbin directory.
-
-
+++ /dev/null
-## missing variables that should be declared somewhere
-
-LINUX_VERSION := 2.4.20
+++ /dev/null
-########################################################################
-#
-# arptables
-#
-# Arptables is used to set up, maintain, and inspect the tables of ARP
-# rules in the Linux kernel. It is analogous to iptables, but operates
-# at the ARP layer rather than the IP layer."
-#
-########################################################################
-
-ARPTABLES_NAME=arptables
-ARPTABLES_VER=v0.0.3-2
-ARPTABLES_SOURCE=$(ARPTABLES_NAME)-$(ARPTABLES_VER).tar.gz
-ARPTABLES_SOURCE_URL=http://unc.dl.sourceforge.net/sourceforge/ebtables/
-ARPTABLES_BUILD_DIR=$(BUILD_DIR)/$(ARPTABLES_NAME)-$(ARPTABLES_VER)
-
-$(DL_DIR)/$(ARPTABLES_SOURCE):
- $(WGET) -P $(DL_DIR) $(ARPTABLES_SOURCE_URL)/$(ARPTABLES_SOURCE)
-
-$(ARPTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(ARPTABLES_SOURCE)
- zcat $(DL_DIR)/$(ARPTABLES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(ARPTABLES_BUILD_DIR)/.unpacked
-
-$(ARPTABLES_BUILD_DIR)/.configured: $(ARPTABLES_BUILD_DIR)/.unpacked
- # Allow patches. Needed for openwrt for instance.
- $(SOURCE_DIR)/patch-kernel.sh $(ARPTABLES_BUILD_DIR) $(SOURCE_DIR) $(ARPTABLES_NAME)-*.patch
- touch $(ARPTABLES_BUILD_DIR)/.configured
-
-$(ARPTABLES_BUILD_DIR)/$(ARPTABLES_NAME): $(ARPTABLES_BUILD_DIR)/.configured
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(ARPTABLES_BUILD_DIR) \
- CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)"
-
-$(TARGET_DIR)/sbin/$(ARPTABLES_NAME): $(ARPTABLES_BUILD_DIR)/$(ARPTABLES_NAME)
- mkdir -p $(TARGET_DIR)/sbin/
- cp $(ARPTABLES_BUILD_DIR)/$(ARPTABLES_NAME) $(TARGET_DIR)/sbin/$(ARPTABLES_NAME)
- $(STRIP) $(TARGET_DIR)/sbin/$(ARPTABLES_NAME)
-
-$(ARPTABLES_NAME): $(TARGET_DIR)/sbin/$(ARPTABLES_NAME)
-
-$(ARPTABLES_NAME)-source: $(DL_DIR)/$(ARPTABLES_SOURCE)
-
-$(ARPTABLES_NAME)-clean:
- -$(MAKE) -C $(ARPTABLES_BUILD_DIR) clean
-
-$(ARPTABLES_NAME)-dirclean:
- rm -rf $(ARPTABLES_BUILD_DIR)
+++ /dev/null
-#############################################################
-#
-# autoconf
-#
-#############################################################
-AUTOCONF_SOURCE:=autoconf-2.57.tar.bz2
-AUTOCONF_SITE:=ftp://ftp.gnu.org/gnu/autoconf
-AUTOCONF_CAT:=bzcat
-AUTOCONF_DIR:=$(BUILD_DIR)/autoconf-2.57
-AUTOCONF_BINARY:=autoconf
-AUTOCONF_TARGET_BINARY:=usr/bin/autoconf
-
-$(DL_DIR)/$(AUTOCONF_SOURCE):
- $(WGET) -P $(DL_DIR) $(AUTOCONF_SITE)/$(AUTOCONF_SOURCE)
-
-autoconf-source: $(DL_DIR)/$(AUTOCONF_SOURCE)
-
-$(AUTOCONF_DIR)/.unpacked: $(DL_DIR)/$(AUTOCONF_SOURCE)
- $(AUTOCONF_CAT) $(DL_DIR)/$(AUTOCONF_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(AUTOCONF_DIR)/.unpacked
-
-$(AUTOCONF_DIR)/.configured: $(AUTOCONF_DIR)/.unpacked
- (cd $(AUTOCONF_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) EMACS="no" \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(AUTOCONF_DIR)/.configured
-
-$(AUTOCONF_DIR)/bin/$(AUTOCONF_BINARY): $(AUTOCONF_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(AUTOCONF_DIR)
-
-$(TARGET_DIR)/$(AUTOCONF_TARGET_BINARY): $(AUTOCONF_DIR)/bin/$(AUTOCONF_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(AUTOCONF_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-autoconf: uclibc $(TARGET_DIR)/$(AUTOCONF_TARGET_BINARY)
-
-autoconf-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(AUTOCONF_DIR) uninstall
- -$(MAKE) -C $(AUTOCONF_DIR) clean
-
-autoconf-dirclean:
- rm -rf $(AUTOCONF_DIR)
-
+++ /dev/null
-#############################################################
-#
-# automake
-#
-#############################################################
-AUTOMAKE_SOURCE:=automake-1.6.3.tar.bz2
-AUTOMAKE_SITE:=ftp://ftp.gnu.org/gnu/automake
-AUTOMAKE_CAT:=bzcat
-AUTOMAKE_DIR:=$(BUILD_DIR)/automake-1.6.3
-AUTOMAKE_BINARY:=automake
-AUTOMAKE_TARGET_BINARY:=usr/bin/automake
-
-$(DL_DIR)/$(AUTOMAKE_SOURCE):
- $(WGET) -P $(DL_DIR) $(AUTOMAKE_SITE)/$(AUTOMAKE_SOURCE)
-
-automake-source: $(DL_DIR)/$(AUTOMAKE_SOURCE)
-
-$(AUTOMAKE_DIR)/.unpacked: $(DL_DIR)/$(AUTOMAKE_SOURCE)
- $(AUTOMAKE_CAT) $(DL_DIR)/$(AUTOMAKE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(AUTOMAKE_DIR)/.unpacked
-
-$(AUTOMAKE_DIR)/.configured: $(AUTOMAKE_DIR)/.unpacked
- (cd $(AUTOMAKE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(AUTOMAKE_DIR)/.configured
-
-$(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY): $(AUTOMAKE_DIR)/.configured
- $(MAKE) -C $(AUTOMAKE_DIR)
- touch -c $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
-
-$(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY): $(AUTOMAKE_DIR)/$(AUTOMAKE_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(AUTOMAKE_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- touch -c $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY)
-
-automake: uclibc $(TARGET_DIR)/$(AUTOMAKE_TARGET_BINARY)
-
-automake-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(AUTOMAKE_DIR) uninstall
- -$(MAKE) -C $(AUTOMAKE_DIR) clean
-
-automake-dirclean:
- rm -rf $(AUTOMAKE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# bash
-#
-#############################################################
-BASH_SOURCE:=bash-2.05b.tar.gz
-BASH_SITE:=ftp://ftp.gnu.org/gnu/bash
-BASH_CAT:=zcat
-BASH_DIR:=$(BUILD_DIR)/bash-2.05b
-BASH_BINARY:=bash
-BASH_TARGET_BINARY:=bin/bash
-
-$(DL_DIR)/$(BASH_SOURCE):
- $(WGET) -P $(DL_DIR) $(BASH_SITE)/$(BASH_SOURCE)
-
-bash-source: $(DL_DIR)/$(BASH_SOURCE)
-
-$(BASH_DIR)/.unpacked: $(DL_DIR)/$(BASH_SOURCE)
- $(BASH_CAT) $(DL_DIR)/$(BASH_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # This is broken when -lintl is added to LIBS
- $(SED) 's,LIBS_FOR_BUILD =.*,LIBS_FOR_BUILD =,g' \
- $(BASH_DIR)/builtins/Makefile.in
- touch $(BASH_DIR)/.unpacked
-
-$(BASH_DIR)/.configured: $(BASH_DIR)/.unpacked
- (cd $(BASH_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) CC_FOR_BUILD=$(HOSTCC) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_setvbuf_reversed=no \
- bash_cv_have_mbstate_t=yes \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --with-curses \
- --enable-alias \
- );
- touch $(BASH_DIR)/.configured
-
-$(BASH_DIR)/$(BASH_BINARY): $(BASH_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) CC_FOR_BUILD=$(HOSTCC) -C $(BASH_DIR)
-
-$(TARGET_DIR)/$(BASH_TARGET_BINARY): $(BASH_DIR)/$(BASH_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BASH_DIR) install
- rm -f $(TARGET_DIR)/bin/bash*
- mv $(TARGET_DIR)/usr/bin/bash* $(TARGET_DIR)/bin/
- (cd $(TARGET_DIR)/bin; ln -fs bash sh)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-bash: ncurses uclibc $(TARGET_DIR)/$(BASH_TARGET_BINARY)
-
-bash-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BASH_DIR) uninstall
- -$(MAKE) -C $(BASH_DIR) clean
-
-bash-dirclean:
- rm -rf $(BASH_DIR)
-
+++ /dev/null
-#############################################################
-#
-# berkeley db
-#
-#############################################################
-DB_SITE:=http://www.sleepycat.com/update/snapshot
-DB_SOURCE:=db-4.1.25.NC.tar.gz
-DB_DIR:=$(BUILD_DIR)/db-4.1.25.NC
-
-
-$(DL_DIR)/$(DB_SOURCE):
- $(WGET) -P $(DL_DIR) $(DB_SITE)/$(DB_SOURCE)
-
-berkeleydb-source: $(DL_DIR)/$(DB_SOURCE)
-
-$(DB_DIR)/.dist: $(DL_DIR)/$(DB_SOURCE)
- zcat $(DL_DIR)/$(DB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(DB_DIR)/.dist
-
-$(DB_DIR)/.configured: $(DB_DIR)/.dist
- (cd $(DB_DIR)/build_unix; rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ../dist/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --with-gnu-ld \
- --enable-shared \
- --disable-cxx \
- --disable-java \
- --disable-rpc \
- --disable-tcl \
- --disable-compat185 \
- --with-pic \
- );
- $(SED) 's/\.lo/.o/g' $(DB_DIR)/build_unix/Makefile
- touch $(DB_DIR)/.configured
-
-$(DB_DIR)/build_unix/.libs/libdb-4.1.so: $(DB_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(DB_DIR)/build_unix
-
-$(STAGING_DIR)/lib/libdb-4.1.so: $(DB_DIR)/build_unix/.libs/libdb-4.1.so
- $(MAKE) \
- prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/lib \
- datadir=$(STAGING_DIR)/share \
- sysconfdir=$(STAGING_DIR)/etc \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- includedir=$(STAGING_DIR)/include \
- -C $(DB_DIR)/build_unix install;
- chmod a-x $(STAGING_DIR)/lib/libdb*so*
- rm -f $(STAGING_DIR)/bin/db_*
- rm -rf $(STAGING_DIR)/share/locale $(STAGING_DIR)/info \
- $(STAGING_DIR)/man $(STAGING_DIR)/share/doc
-
-$(TARGET_DIR)/lib/libdb-4.1.so: $(STAGING_DIR)/lib/libdb-4.1.so
- rm -rf $(TARGET_DIR)/lib/libdb*
- cp -a $(STAGING_DIR)/lib/libdb*so* $(TARGET_DIR)/lib/
- rm -f $(TARGET_DIR)/lib/libdb.so $(TARGET_DIR)/lib/libdb.la $(TARGET_DIR)/lib/libdb.a
- (cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libdb-4.1.so libdb.so)
- -$(STRIP) $(TARGET_DIR)/lib/libdb*so*
-
-$(TARGET_DIR)/usr/lib/libdb.a: $(STAGING_DIR)/lib/libdb-4.1.a
- cp -dpf $(STAGING_DIR)/include/db.h $(TARGET_DIR)/usr/include/
- cp -dpf $(STAGING_DIR)/lib/libdb*.a $(TARGET_DIR)/usr/lib/
- cp -dpf $(STAGING_DIR)/lib/libdb*.la $(TARGET_DIR)/usr/lib/
- touch -c $(TARGET_DIR)/usr/lib/libdb.a
-
-berkeleydb-headers: $(TARGET_DIR)/usr/lib/libdb.a
-
-berkeleydb-clean:
- $(MAKE) -C $(DB_DIR)/build_unix clean
-
-berkeleydb-dirclean:
- rm -rf $(DB_DIR)
-
-berkeleydb: uclibc $(TARGET_DIR)/lib/libdb-4.1.so
-
+++ /dev/null
-#############################################################
-#
-# build binutils for use on the host system
-#
-#############################################################
-BINUTILS_SITE:=http://ftp.kernel.org/pub/linux/devel/binutils
-BINUTILS_SOURCE:=binutils-2.14.90.0.7.tar.bz2
-BINUTILS_DIR:=$(TOOL_BUILD_DIR)/binutils-2.14.90.0.7
-BINUTILS_CAT:=bzcat
-
-BINUTILS_DIR1:=$(TOOL_BUILD_DIR)/binutils-build
-
-$(DL_DIR)/$(BINUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(BINUTILS_SITE)/$(BINUTILS_SOURCE)
-
-$(BINUTILS_DIR)/.unpacked: $(DL_DIR)/$(BINUTILS_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- mkdir -p $(DL_DIR)
- $(BINUTILS_CAT) $(DL_DIR)/$(BINUTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(BINUTILS_DIR)/.unpacked
-
-$(BINUTILS_DIR)/.patched: $(BINUTILS_DIR)/.unpacked
- # Apply any files named binutils-*.patch from the source directory to binutils
- $(SOURCE_DIR)/patch-kernel.sh $(BINUTILS_DIR) $(SOURCE_DIR) binutils-uclibc*.patch
- touch $(BINUTILS_DIR)/.patched
-
-$(BINUTILS_DIR1)/.configured: $(BINUTILS_DIR)/.patched
- mkdir -p $(BINUTILS_DIR1)
- (cd $(BINUTILS_DIR1); \
- $(BINUTILS_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) );
- touch $(BINUTILS_DIR1)/.configured
-
-$(BINUTILS_DIR1)/binutils/objdump: $(BINUTILS_DIR1)/.configured
- $(MAKE) $(JLEVEL) -C $(BINUTILS_DIR1) all
-
-# Make install will put gettext data in staging_dir/share/locale.
-# Unfortunatey, it isn't configureable.
-$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/ld: $(BINUTILS_DIR1)/binutils/objdump
- $(MAKE) $(JLEVEL) -C $(BINUTILS_DIR1) install
-
-binutils-dependancies:
- @if [ -z "`which bison`" ] ; then \
- echo -e "\n\nYou must install 'bison' on your build machine\n"; \
- exit 1; \
- fi;
- @if [ -z "`which flex`" ] ; then \
- echo -e "\n\nYou must install 'flex' on your build machine\n"; \
- exit 1; \
- fi;
- @if [ -z "`which msgfmt`" ] ; then \
- echo -e "\n\nYou must install 'gettext' on your build machine\n"; \
- exit 1; \
- fi;
-
-binutils: binutils-dependancies $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/bin/ld
-
-binutils-source: $(DL_DIR)/$(BINUTILS_SOURCE)
-
-binutils-clean:
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
- -$(MAKE) -C $(BINUTILS_DIR1) clean
-
-binutils-dirclean:
- rm -rf $(BINUTILS_DIR1)
-
-
-
-#############################################################
-#
-# build binutils for use on the target system
-#
-#############################################################
-BINUTILS_DIR2:=$(BUILD_DIR)/binutils-target
-$(BINUTILS_DIR2)/.configured: $(BINUTILS_DIR)/.patched
- mkdir -p $(BINUTILS_DIR2)
- (cd $(BINUTILS_DIR2); \
- PATH=$(TARGET_PATH) \
- CFLAGS="$(TARGET_CFLAGS)" \
- CFLAGS_FOR_BUILD="-O2 -g" \
- $(BINUTILS_DIR)/configure \
- --prefix=/usr \
- --exec-prefix=/usr \
- --build=$(GNU_HOST_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) );
- touch $(BINUTILS_DIR2)/.configured
-
-$(BINUTILS_DIR2)/binutils/objdump: $(BINUTILS_DIR2)/.configured
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) -C $(BINUTILS_DIR2) all
-
-$(TARGET_DIR)/usr/bin/ld: $(BINUTILS_DIR2)/binutils/objdump
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) \
- tooldir=/usr build_tooldir=/usr \
- -C $(BINUTILS_DIR2) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- -$(STRIP) $(TARGET_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin/* > /dev/null 2>&1
- -$(STRIP) $(TARGET_DIR)/usr/bin/* > /dev/null 2>&1
-
-binutils_target: $(GCC_DEPENDANCY) $(TARGET_DIR)/usr/bin/ld
-
-binutils_target-clean:
- rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
- -$(MAKE) -C $(BINUTILS_DIR2) clean
-
-binutils_target-dirclean:
- rm -rf $(BINUTILS_DIR2)
-
+++ /dev/null
-#############################################################
-#
-# bison
-#
-#############################################################
-BISON_SOURCE:=bison-1.35.tar.bz2
-BISON_SITE:=ftp://ftp.gnu.org/gnu/bison
-BISON_DIR:=$(BUILD_DIR)/bison-1.35
-BISON_CAT:=bzcat
-BISON_BINARY:=src/bison
-BISON_TARGET_BINARY:=usr/bin/bison
-
-$(DL_DIR)/$(BISON_SOURCE):
- $(WGET) -P $(DL_DIR) $(BISON_SITE)/$(BISON_SOURCE)
-
-bison-source: $(DL_DIR)/$(BISON_SOURCE)
-
-$(BISON_DIR)/.unpacked: $(DL_DIR)/$(BISON_SOURCE)
- $(BISON_CAT) $(DL_DIR)/$(BISON_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(BISON_DIR)/.unpacked
-
-$(BISON_DIR)/.configured: $(BISON_DIR)/.unpacked
- (cd $(BISON_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- gt_cv_func_gnugettext2_libintl=yes \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(BISON_DIR)/.configured
-
-$(BISON_DIR)/$(BISON_BINARY): $(BISON_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(BISON_DIR)
-
-$(TARGET_DIR)/$(BISON_TARGET_BINARY): $(BISON_DIR)/$(BISON_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BISON_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- cp -a $(SOURCE_DIR)/yacc $(TARGET_DIR)/usr/bin/yacc
-
-bison: uclibc $(TARGET_DIR)/$(BISON_TARGET_BINARY)
-
-bison-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BISON_DIR) uninstall
- -$(MAKE) -C $(BISON_DIR) clean
-
-bison-dirclean:
- rm -rf $(BISON_DIR)
-
+++ /dev/null
-#############################################################
-#
-# boa
-#
-#############################################################
-
-BOA_VERSION=0.94.14rc4
-
-# Don't alter below this line unless you (think) you know
-# what you are doing! Danger, Danger!
-
-BOA_SOURCE=boa-$(BOA_VERSION).tar.gz
-BOA_SITE=http://www.boa.org/
-BOA_DIR=$(BUILD_DIR)/${shell basename $(BOA_SOURCE) .tar.gz}
-BOA_WORKDIR=$(BUILD_DIR)/boa_workdir
-
-$(DL_DIR)/$(BOA_SOURCE):
- $(WGET) -P $(DL_DIR) $(BOA_SITE)/$(BOA_SOURCE)
-
-$(BOA_DIR)/.unpacked: $(DL_DIR)/$(BOA_SOURCE)
- gzip -d -c $(DL_DIR)/$(BOA_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(BOA_DIR)/.unpacked
-
-$(BOA_WORKDIR)/Makefile: $(BOA_DIR)/.unpacked
- rm -f $(BOA_WORKDIR)/Makefile
- mkdir -p $(BOA_WORKDIR)
- (cd $(BOA_WORKDIR) && CONFIG_SITE=$(SOURCE_DIR)/boa-config.site-$(ARCH) \
- CC=$(TARGET_CC) $(BOA_DIR)/configure)
- touch $(BOA_WORKDIR)/.depend
-
-$(BOA_WORKDIR)/boa $(BOA_WORKDIR)/boa_indexer: $(BOA_WORKDIR)/Makefile
- rm -f $@
- $(MAKE) VPATH=$(BOA_DIR)/src/ -C $(BOA_WORKDIR)
-
-$(BOA_WORKDIR)/.installed: $(BOA_WORKDIR)/boa $(BOA_WORKDIR)/boa_indexer
- mkdir -p $(TARGET_DIR)/usr/sbin
- cp -f $(BOA_WORKDIR)/src/boa $(TARGET_DIR)/usr/sbin/boa
- mkdir -p $(TARGET_DIR)/usr/lib/boa
- cp -f $(BOA_WORKDIR)/src/boa_indexer $(TARGET_DIR)/usr/lib/boa/boa_indexer
- mkdir -p $(TARGET_DIR)/etc/boa
- cp -f $(SOURCE_DIR)/boa.conf $(TARGET_DIR)/etc/boa
- cp -f $(SOURCE_DIR)/mime.types $(TARGET_DIR)/etc/mime.types
- strip --strip-all $(TARGET_DIR)/usr/sbin/boa $(TARGET_DIR)/usr/lib/boa/boa_indexer
- touch $(BOA_WORKDIR)/.installed
-
-boa: uclibc $(BOA_WORKDIR)/.installed
-
-boa-source: $(DL_DIR)/$(BOA_SOURCE)
-
-boa-clean:
- @if [ -d $(BOA_WORKDIR)/Makefile ] ; then \
- $(MAKE) -C $(BOA_WORKDIR) clean ; \
- fi;
-
-boa-dirclean:
- rm -rf $(BOA_DIR) $(BOA_WORKDIR)
-
+++ /dev/null
-#############################################################
-#
-# bridgeutils - User Space Program For Controling Bridging
-#
-#############################################################
-
-ifeq ($(strip $(USE_BRIDGE_VERSION)),)
-USE_BRIDGE_VERSION=0.9.7
-endif
-BRIDGE_SOURCE_URL=http://dl.sourceforge.net/sourceforge/bridge/
-BRIDGE_SOURCE=bridge-utils-$(USE_BRIDGE_VERSION).tar.gz
-BRIDGE_BUILD_DIR=$(BUILD_DIR)/bridge-utils-$(USE_BRIDGE_VERSION)
-BRIDGE_TARGET_BINARY:=usr/sbin/brctl
-
-$(DL_DIR)/$(BRIDGE_SOURCE):
- $(WGET) -P $(DL_DIR) $(BRIDGE_SOURCE_URL)/$(BRIDGE_SOURCE)
-
-$(BRIDGE_BUILD_DIR)/.unpacked: $(DL_DIR)/$(BRIDGE_SOURCE)
- # ack! it's a .tgz which is really a bzip
- zcat $(DL_DIR)/$(BRIDGE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- patch -p1 -d $(BRIDGE_BUILD_DIR) < $(SOURCE_DIR)/bridge.patch
- touch $(BRIDGE_BUILD_DIR)/.unpacked
-
-$(BRIDGE_BUILD_DIR)/.configured: $(BRIDGE_BUILD_DIR)/.unpacked
- (cd $(BRIDGE_BUILD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --with-linux-headers=$(LINUX_DIR) \
- );
- touch $(BRIDGE_BUILD_DIR)/.configured
-
-$(BRIDGE_BUILD_DIR)/brctl/brctl: $(BRIDGE_BUILD_DIR)/.configured
- $(MAKE) -C $(BRIDGE_BUILD_DIR)
-
-$(TARGET_DIR)/$(BRIDGE_TARGET_BINARY): $(BRIDGE_BUILD_DIR)/brctl/brctl
- cp -af $(BRIDGE_BUILD_DIR)/brctl/brctl $(TARGET_DIR)/$(BRIDGE_TARGET_BINARY)
- $(STRIP) $(TARGET_DIR)/$(BRIDGE_TARGET_BINARY)
- #cp -af $(BRIDGE_BUILD_DIR)/brctl/brctld $(TARGET_DIR)/usr/sbin/
- #$(STRIP) $(TARGET_DIR)/usr/sbin/brctld
-
-bridge: $(TARGET_DIR)/$(BRIDGE_TARGET_BINARY)
-
-bridge-source: $(DL_DIR)/$(BRIDGE_SOURCE)
-
-bridge-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BRIDGE_BUILD_DIR) uninstall
- -$(MAKE) -C $(BRIDGE_BUILD_DIR) clean
-
-bridge-dirclean:
- rm -rf $(BRIDGE_BUILD_DIR)
+++ /dev/null
-#############################################################
-#
-# busybox
-#
-#############################################################
-
-ifneq ($(strip $(USE_BUSYBOX_SNAPSHOT)),)
-# Be aware that this changes daily....
-BUSYBOX_DIR:=$(BUILD_DIR)/busybox
-BUSYBOX_SOURCE:=busybox-$(strip $(USE_BUSYBOX_SNAPSHOT)).tar.bz2
-BUSYBOX_SITE:=http://www.busybox.net/downloads/snapshots
-else
-BUSYBOX_DIR:=$(BUILD_DIR)/busybox-1.00
-BUSYBOX_SOURCE:=busybox-1.00.tar.bz2
-BUSYBOX_SITE:=http://www.busybox.net/downloads
-endif
-BUSYBOX_UNZIP=bzcat
-BUSYBOX_CONFIG:=$(SOURCE_DIR)/openwrt/busybox/busybox.config
-
-$(DL_DIR)/$(BUSYBOX_SOURCE):
- $(WGET) -P $(DL_DIR) $(BUSYBOX_SITE)/$(BUSYBOX_SOURCE)
-
-busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
-
-$(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG)
- $(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # Allow busybox patches.
- $(SOURCE_DIR)/patch-kernel.sh $(BUSYBOX_DIR) $(SOURCE_DIR)/openwrt/busybox/patches
- cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config
- $(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\
- PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
- $(SED) "s/^.*CONFIG_LFS.*/CONFIG_LFS=y/;" $(BUSYBOX_DIR)/.config
-else
- $(SED) "s/^.*CONFIG_LFS.*/CONFIG_LFS=n/;" $(BUSYBOX_DIR)/.config
-endif
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" -C $(BUSYBOX_DIR) oldconfig
- touch $(BUSYBOX_DIR)/.configured
-
-busybox-unpack: $(BUSYBOX_DIR)/.configured
-
-$(BUSYBOX_DIR)/busybox: $(BUSYBOX_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" PREFIX="$(TARGET_DIR)" \
- EXTRA_CFLAGS="$(TARGET_CFLAGS) -fomit-frame-pointer" -C $(BUSYBOX_DIR)
-
-$(TARGET_DIR)/bin/busybox: $(BUSYBOX_DIR)/busybox
- $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" PREFIX="$(TARGET_DIR)" \
- EXTRA_CFLAGS="$(TARGET_CFLAGS)" -C $(BUSYBOX_DIR) install
- # Just in case
- -chmod a+x $(TARGET_DIR)/usr/share/udhcpc/default.script
-
-busybox: uclibc $(TARGET_DIR)/bin/busybox
-
-busybox-clean:
- rm -f $(TARGET_DIR)/bin/busybox
- -$(MAKE) -C $(BUSYBOX_DIR) clean
-
-busybox-dirclean:
- rm -rf $(BUSYBOX_DIR)
+++ /dev/null
-#############################################################
-#
-# bzip2
-#
-#############################################################
-BZIP2_SOURCE:=bzip2-1.0.2.tar.gz
-BZIP2_SITE:=ftp://sources.redhat.com/pub/bzip2/v102
-BZIP2_DIR:=$(BUILD_DIR)/bzip2-1.0.2
-BZIP2_CAT:=zcat
-BZIP2_BINARY:=$(BZIP2_DIR)/bzip2
-BZIP2_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/bzmore
-
-$(DL_DIR)/$(BZIP2_SOURCE):
- $(WGET) -P $(DL_DIR) $(BZIP2_SITE)/$(BZIP2_SOURCE)
-
-bzip2-source: $(DL_DIR)/$(BZIP2_SOURCE)
-
-$(BZIP2_DIR)/.unpacked: $(DL_DIR)/$(BZIP2_SOURCE)
- $(BZIP2_CAT) $(DL_DIR)/$(BZIP2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SED) "s,ln \$$(,ln -sf \$$(,g" $(BZIP2_DIR)/Makefile
- $(SED) "s,ln -s (lib.*),ln -sf \$$1 ; ln -sf libbz2.so.1.0.2 libbz2.so,g" \
- $(BZIP2_DIR)/Makefile-libbz2_so
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),false)
- $(SED) "s,^BIGFILES,#BIGFILES,g" $(BZIP2_DIR)/Makefile
- $(SED) "s,^BIGFILES,#BIGFILES,g" $(BZIP2_DIR)/Makefile-libbz2_so
-endif
- touch $(BZIP2_DIR)/.unpacked
-
-$(STAGING_DIR)/lib/libbz2.so.1.0.2: $(BZIP2_DIR)/.unpacked
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) -f Makefile-libbz2_so
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) libbz2.a
- cp $(BZIP2_DIR)/bzlib.h $(STAGING_DIR)/include/
- cp $(BZIP2_DIR)/libbz2.so.1.0.2 $(STAGING_DIR)/lib/
- cp $(BZIP2_DIR)/libbz2.a $(STAGING_DIR)/lib/
- (cd $(STAGING_DIR)/lib/; ln -sf libbz2.so.1.0.2 libbz2.so)
- (cd $(STAGING_DIR)/lib/; ln -sf libbz2.so.1.0.2 libbz2.so.1.0)
-
-$(BZIP2_BINARY): $(STAGING_DIR)/lib/libbz2.so.1.0.2
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(BZIP2_DIR) bzip2 bzip2recover
-
-$(BZIP2_TARGET_BINARY): $(BZIP2_BINARY)
- (cd $(TARGET_DIR)/usr/bin; \
- rm -f bzip2 bunzip2 bzcat bzip2recover bzgrep bzegrep bzfgrep bzmore bzless bzdiff bzcmp);
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) PREFIX=$(TARGET_DIR)/usr -C $(BZIP2_DIR) install
- rm -f $(TARGET_DIR)/usr/lib/libbz2.a
- rm -f $(TARGET_DIR)/usr/include/bzlib.h
- cp $(BZIP2_DIR)/libbz2.so.1.0.2 $(TARGET_DIR)/usr/lib/
- (cd $(TARGET_DIR)/usr/lib; \
- ln -sf libbz2.so.1.0.2 libbz2.so.1.0; \
- ln -sf libbz2.so.1.0.2 libbz2.so)
- (cd $(TARGET_DIR)/usr/bin; \
- ln -sf bzip2 bunzip2; \
- ln -sf bzip2 bzcat; \
- ln -sf bzdiff bzcmp; \
- ln -sf bzmore bzless; \
- ln -sf bzgrep bzegrep; \
- ln -sf bzgrep bzfgrep;)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-$(TARGET_DIR)/usr/lib/libbz2.a: $(STAGING_DIR)/lib/libbz2.a
- mkdir -p $(TARGET_DIR)/usr/include
- cp $(STAGING_DIR)/include/bzlib.h $(TARGET_DIR)/usr/include/
- cp $(STAGING_DIR)/lib/libbz2.a $(TARGET_DIR)/usr/lib/
- rm -f $(TARGET_DIR)/lib/libbz2.so
- (cd $(TARGET_DIR)/usr/lib; \
- ln -fs /usr/lib/libbz2.so.1.0 libbz2.so; \
- )
- -$(STRIP) $(TARGET_DIR)/usr/lib/libbz2.so.1.0
- touch -c $(TARGET_DIR)/usr/lib/libbz2.a
-
-bzip2-headers: $(TARGET_DIR)/usr/lib/libbz2.a
-
-bzip2: uclibc $(BZIP2_TARGET_BINARY)
-
-bzip2-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(BZIP2_DIR) uninstall
- -$(MAKE) -C $(BZIP2_DIR) clean
-
-bzip2-dirclean:
- rm -rf $(BZIP2_DIR)
-
+++ /dev/null
-#############################################################
-#
-# build ccache to make recompiles faster on the build system
-#
-#############################################################
-CCACHE_SITE:=http://ccache.samba.org/ftp/ccache
-CCACHE_SOURCE:=ccache-2.3.tar.gz
-CCACHE_DIR1:=$(TOOL_BUILD_DIR)/ccache-2.3
-CCACHE_DIR2:=$(BUILD_DIR)/ccache-2.3
-CCACHE_CAT:=zcat
-CCACHE_BINARY:=ccache
-CCACHE_TARGET_BINARY:=usr/bin/ccache
-
-$(DL_DIR)/$(CCACHE_SOURCE):
- $(WGET) -P $(DL_DIR) $(CCACHE_SITE)/$(CCACHE_SOURCE)
-
-$(CCACHE_DIR1)/.unpacked: $(DL_DIR)/$(CCACHE_SOURCE)
- $(CCACHE_CAT) $(DL_DIR)/$(CCACHE_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(CCACHE_DIR1)/.unpacked
-
-$(CCACHE_DIR1)/.patched: $(CCACHE_DIR1)/.unpacked
- $(SED) "s,getenv(\"CCACHE_PATH\"),\"$(STAGING_DIR)/usr/bin\",g" \
- $(CCACHE_DIR1)/execute.c
- $(SED) "s,getenv(\"CCACHE_DIR\"),\"$(CCACHE_DIR1)/cache\",g" \
- $(CCACHE_DIR1)/ccache.c
- mkdir -p $(CCACHE_DIR1)/cache
- touch $(CCACHE_DIR1)/.patched
-
-$(CCACHE_DIR1)/.configured: $(CCACHE_DIR1)/.patched
- mkdir -p $(CCACHE_DIR1)
- (cd $(CCACHE_DIR1); rm -rf config.cache; \
- CC=$(HOSTCC) \
- $(CCACHE_DIR1)/configure \
- --target=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- );
- touch $(CCACHE_DIR1)/.configured
-
-$(CCACHE_DIR1)/$(CCACHE_BINARY): $(CCACHE_DIR1)/.configured
- $(MAKE) CC=$(HOSTCC) -C $(CCACHE_DIR1)
-
-$(STAGING_DIR)/$(CCACHE_TARGET_BINARY): $(CCACHE_DIR1)/$(CCACHE_BINARY)
- mkdir -p $(STAGING_DIR)/usr/bin;
- mkdir -p $(TOOL_BUILD_DIR)/.ccache;
- cp $(CCACHE_DIR1)/ccache $(STAGING_DIR)/usr/bin
- (cd $(STAGING_DIR)/usr/bin; \
- ln -fs $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(OPTIMIZE_FOR_CPU)-linux-gcc; \
- ln -fs $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(OPTIMIZE_FOR_CPU)-linux-cc; \
- ln -fs $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(OPTIMIZE_FOR_CPU)-linux-uclibc-cc);
- [ -f $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc ] && \
- mv $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc $(STAGING_DIR)/usr/bin/
- (cd $(STAGING_DIR)/bin; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-cc; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-gcc; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-cc; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-gcc);
-ifeq ($(INSTALL_LIBSTDCPP),true)
- [ -f $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-c++ ] && \
- mv $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-c++ $(STAGING_DIR)/usr/bin/
- [ -f $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-g++ ] && \
- mv $(STAGING_DIR)/bin/$(OPTIMIZE_FOR_CPU)-linux-uclibc-g++ $(STAGING_DIR)/usr/bin/
- (cd $(STAGING_DIR)/bin; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-c++; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-g++;\
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-c++; \
- ln -fs ../usr/bin/ccache $(OPTIMIZE_FOR_CPU)-linux-uclibc-g++);
-endif
-
-ifeq ($(GCC_2_95_TOOLCHAIN),true)
-ccache: gcc2_95 $(STAGING_DIR)/$(CCACHE_TARGET_BINARY)
-else
-ccache: gcc3_3 $(STAGING_DIR)/$(CCACHE_TARGET_BINARY)
-endif
-
-ccache-clean:
- $(MAKE) -C $(CCACHE_DIR1) uninstall
- -$(MAKE) -C $(CCACHE_DIR1) clean
-
-ccache-dirclean:
- rm -rf $(CCACHE_DIR1)
-
-
-
-
-#############################################################
-#
-# build ccache for use on the target system
-#
-#############################################################
-
-$(CCACHE_DIR2)/.unpacked: $(DL_DIR)/$(CCACHE_SOURCE)
- $(CCACHE_CAT) $(DL_DIR)/$(CCACHE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(CCACHE_DIR2)/.unpacked
-
-$(CCACHE_DIR2)/.patched: $(CCACHE_DIR2)/.unpacked
- touch $(CCACHE_DIR2)/.patched
-
-$(CCACHE_DIR2)/.configured: $(CCACHE_DIR2)/.patched
- mkdir -p $(CCACHE_DIR2)
- (cd $(CCACHE_DIR2); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(CCACHE_DIR2)/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(CCACHE_DIR2)/.configured
-
-$(CCACHE_DIR2)/$(CCACHE_BINARY): $(CCACHE_DIR2)/.configured
- $(MAKE) -C $(CCACHE_DIR2)
-
-$(TARGET_DIR)/$(CCACHE_TARGET_BINARY): $(CCACHE_DIR2)/$(CCACHE_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(CCACHE_DIR2) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # put a bunch of symlinks into /bin, since that is earlier
- # in the default PATH than /usr/bin where gcc lives
- (cd $(TARGET_DIR)/bin; \
- ln -fs /usr/bin/ccache cc; \
- ln -fs /usr/bin/ccache gcc; \
- ln -fs /usr/bin/ccache c++; \
- ln -fs /usr/bin/ccache g++;)
-
-ccache_target: uclibc $(TARGET_DIR)/$(CCACHE_TARGET_BINARY)
-
-ccache_target-sources: $(DL_DIR)/$(CCACHE_SOURCE)
-
-ccache_target-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(CCACHE_DIR2) uninstall
- -$(MAKE) -C $(CCACHE_DIR2) clean
-
-ccache_target-dirclean:
- rm -rf $(CCACHE_DIR2)
-
+++ /dev/null
-#############################################################
-#
-# chillispot
-#
-#############################################################
-
-CHILLISPOT_VERSION:=0.96
-CHILLISPOT_RELEASE:=1
-
-CHILLISPOT_SOURCE:=chillispot-$(CHILLISPOT_VERSION).tar.gz
-CHILLISPOT_SITE:=http://www.chillispot.org/download/
-CHILLISPOT_CAT:=zcat
-CHILLISPOT_DIR:=$(BUILD_DIR)/chillispot-$(CHILLISPOT_VERSION)
-CHILLISPOT_BINARY:=src/chilli
-CHILLISPOT_TARGET_BINARY:=usr/sbin/chilli
-
-CHILLISPOT_BUILD_DIR := $(BUILD_DIR)/chillispot_$(CHILLISPOT_VERSION)-$(CHILLISPOT_RELEASE)
-CHILLISPOT_IPK_DIR := $(OPENWRT_IPK_DIR)/chillispot
-CHILLISPOT_IPK := $(CHILLISPOT_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(CHILLISPOT_SOURCE):
- $(WGET) -P $(DL_DIR) $(CHILLISPOT_SITE)/$(CHILLISPOT_SOURCE)
-
-chillispot-source: $(DL_DIR)/$(CHILLISPOT_SOURCE)
-
-$(CHILLISPOT_DIR)/.stamp-unpacked: $(DL_DIR)/$(CHILLISPOT_SOURCE)
- $(CHILLISPOT_CAT) $(DL_DIR)/$(CHILLISPOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(CHILLISPOT_DIR)/.stamp-unpacked
-
-$(CHILLISPOT_DIR)/.stamp-configured: $(CHILLISPOT_DIR)/.stamp-unpacked
- (cd $(CHILLISPOT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_malloc_0_nonnull=yes \
- ac_cv_func_memcmp_working=yes \
- ac_cv_func_setvbuf_reversed=no \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(CHILLISPOT_DIR)/.stamp-configured
-
-$(CHILLISPOT_DIR)/.stamp-built: $(CHILLISPOT_DIR)/.stamp-configured
- $(MAKE) CC=$(TARGET_CC) $(TARGET_CONFIGURE_OPTS) -C $(CHILLISPOT_DIR)
- touch $(CHILLISPOT_DIR)/.stamp-built
-
-$(CHILLISPOT_BUILD_DIR)/CONTROL/control: $(CHILLISPOT_DIR)/.stamp-built
- rm -rf $(CHILLISPOT_BUILD_DIR)
- mkdir -p $(CHILLISPOT_BUILD_DIR)/usr/sbin
- cp -a $(CHILLISPOT_DIR)/src/chilli $(CHILLISPOT_BUILD_DIR)/usr/sbin/
- $(STRIP) $(CHILLISPOT_BUILD_DIR)/usr/sbin/*
- mkdir -p $(CHILLISPOT_BUILD_DIR)/etc
- cp -a $(CHILLISPOT_DIR)/doc/chilli.conf $(CHILLISPOT_BUILD_DIR)/etc
- cp -a $(CHILLISPOT_IPK_DIR)/root/* $(CHILLISPOT_BUILD_DIR)/
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/etc
- chmod 0600 $(CHILLISPOT_BUILD_DIR)/etc/chilli.conf
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/etc/init.d
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/etc/init.d/*
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/usr
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/usr/sbin
- chmod 0755 $(CHILLISPOT_BUILD_DIR)/usr/sbin/*
- cp -a $(CHILLISPOT_IPK_DIR)/CONTROL $(CHILLISPOT_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(CHILLISPOT_VERSION)-$(CHILLISPOT_RELEASE)/" $(CHILLISPOT_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(CHILLISPOT_BUILD_DIR)/CONTROL/control
-
- touch $(CHILLISPOT_BUILD_DIR)/CONTROL/control
-
-
-$(CHILLISPOT_IPK): $(CHILLISPOT_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(CHILLISPOT_BUILD_DIR)
-
-
-chillispot-ipk: ipkg-utils $(CHILLISPOT_IPK)
-
-chillispot-clean:
- $(MAKE) -C $(CHILLISPOT_DIR) clean
-
-chillispot-dirclean:
- rm -rf $(CHILLISPOT_DIR)
+++ /dev/null
-#############################################################
-#
-# coreutils
-#
-#############################################################
-COREUTILS_SOURCE:=coreutils-5.0.tar.bz2
-COREUTILS_SITE:=ftp://ftp.gnu.org/gnu/coreutils/
-COREUTILS_CAT:=bzcat
-COREUTILS_DIR:=$(BUILD_DIR)/coreutils-5.0
-COREUTILS_BINARY:=src/vdir
-COREUTILS_TARGET_BINARY:=bin/vdir
-BIN_PROGS:=cat chgrp chmod chown cp date dd df dir echo false hostname \
- ln ls mkdir mknod mv pwd rm rmdir vdir sleep stty sync touch true uname
-
-$(DL_DIR)/$(COREUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(COREUTILS_SITE)/$(COREUTILS_SOURCE)
-
-coreutils-source: $(DL_DIR)/$(COREUTILS_SOURCE)
-
-$(COREUTILS_DIR)/.unpacked: $(DL_DIR)/$(COREUTILS_SOURCE)
- $(COREUTILS_CAT) $(DL_DIR)/$(COREUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(COREUTILS_DIR)/.unpacked
-
-$(COREUTILS_DIR)/.configured: $(COREUTILS_DIR)/.unpacked
- (cd $(COREUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --disable-rpath \
- --disable-dependency-tracking \
- );
- #Fix up the max number of open files per process, which apparently
- # is not set when cross compiling
- $(SED) 's,.*UTILS_OPEN_MAX.*,#define UTILS_OPEN_MAX 1019,g' \
- $(COREUTILS_DIR)/config.h
- # This is undefined when crosscompiling...
- $(SED) 's,.*HAVE_PROC_UPTIME.*,#define HAVE_PROC_UPTIME 1,g' \
- $(COREUTILS_DIR)/config.h
- touch $(COREUTILS_DIR)/.configured
-
-$(COREUTILS_DIR)/$(COREUTILS_BINARY): $(COREUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(COREUTILS_DIR)
- rm -f $(TARGET_DIR)/$(COREUTILS_TARGET_BINARY)
-
-$(TARGET_DIR)/$(COREUTILS_TARGET_BINARY): $(COREUTILS_DIR)/$(COREUTILS_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(COREUTILS_DIR) install
- # some things go in root rather than usr
- for f in $(BIN_PROGS); do \
- mv $(TARGET_DIR)/usr/bin/$$f $(TARGET_DIR)/bin/$$f; \
- done
- # link for archaic shells
- ln -fs test $(TARGET_DIR)/usr/bin/[
- # gnu thinks chroot is in bin, debian thinks it's in sbin
- mv $(TARGET_DIR)/usr/bin/chroot $(TARGET_DIR)/usr/sbin/chroot
- $(STRIP) $(TARGET_DIR)/usr/sbin/chroot > /dev/null 2>&1
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-coreutils: uclibc $(TARGET_DIR)/$(COREUTILS_TARGET_BINARY)
-
-coreutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(COREUTILS_DIR) uninstall
- -$(MAKE) -C $(COREUTILS_DIR) clean
-
-coreutils-dirclean:
- rm -rf $(COREUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mkcramfs to build to target cramfs filesystems
-#
-#############################################################
-CRAMFS_DIR=$(BUILD_DIR)/cramfs-1.1
-CRAMFS_SOURCE=cramfs-1.1.tar.gz
-CRAMFS_SITE=http://aleron.dl.sourceforge.net/sourceforge/cramfs
-CRAMFS_PATCH=$(SOURCE_DIR)/cramfs.patch
-
-$(DL_DIR)/$(CRAMFS_SOURCE):
- $(WGET) -P $(DL_DIR) $(CRAMFS_SITE)/$(CRAMFS_SOURCE)
-
-$(CRAMFS_DIR): $(DL_DIR)/$(CRAMFS_SOURCE) $(CRAMFS_PATCH)
- zcat $(DL_DIR)/$(CRAMFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(CRAMFS_PATCH) | patch -p1 -d $(CRAMFS_DIR)
-
-$(CRAMFS_DIR)/mkcramfs: $(CRAMFS_DIR)
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64" -C $(CRAMFS_DIR);
- touch -c $(CRAMFS_DIR)/mkcramfs
-
-cramfs: $(CRAMFS_DIR)/mkcramfs
-
-cramfs-source: $(DL_DIR)/$(CRAMFS_SOURCE)
-
-cramfs-clean:
- -$(MAKE) -C $(CRAMFS_DIR) clean
-
-cramfs-dirclean:
- rm -rf $(CRAMFS_DIR)
-
-#############################################################
-#
-# Build the cramfs root filesystem image
-#
-#############################################################
-
-cramfsroot: cramfs
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true;
- @rm -rf $(TARGET_DIR)/usr/man
- @rm -rf $(TARGET_DIR)/usr/info
- $(CRAMFS_DIR)/mkcramfs -q -D $(SOURCE_DIR)/device_table.txt $(TARGET_DIR) $(IMAGE)
-
-cramfsroot-source: cramfs-source
-
-cramfsroot-clean:
- -$(MAKE) -C $(CRAMFS_DIR) clean
-
-cramfsroot-dirclean:
- rm -rf $(CRAMFS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# Any custom stuff you feel like doing....
-#
-#############################################################
-CUST_DIR:=$(SOURCE_DIR)/customize
-ROOT_DIR:=$(BUILD_DIR)/root
-
-customize:
- cp -af $(CUST_DIR)/* $(ROOT_DIR)/
+++ /dev/null
-## dhcp-fwd
-
-DHCP_FWD_VERSION := 0.7
-DHCP_FWD_RELEASE := 1
-
-DHCP_FWD_SOURCE := dhcp-forwarder-$(DHCP_FWD_VERSION).tar.bz2
-DHCP_FWD_SITE := http://www-user.tu-chemnitz.de/~ensc/dhcp-fwd/files/
-DHCP_FWD_DIR := $(BUILD_DIR)/dhcp-forwarder-$(DHCP_FWD_VERSION)
-DHCP_FWD_CAT := bzcat
-
-DHCP_FWD_BUILD_DIR := $(BUILD_DIR)/dhcp-fwd_$(DHCP_FWD_VERSION)-$(DHCP_FWD_RELEASE)
-DHCP_FWD_IPK_DIR := $(OPENWRT_IPK_DIR)/dhcp-fwd
-DHCP_FWD_IPK := $(DHCP_FWD_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(DHCP_FWD_SOURCE):
- $(WGET) -P $(DL_DIR) $(DHCP_FWD_SITE)/$(DHCP_FWD_SOURCE)
-
-
-$(DHCP_FWD_DIR)/.stamp-unpacked: $(DL_DIR)/$(DHCP_FWD_SOURCE)
- $(DHCP_FWD_CAT) $(DL_DIR)/$(DHCP_FWD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(DHCP_FWD_DIR)/.stamp-unpacked
-
-
-$(DHCP_FWD_DIR)/.stamp-configured: $(DHCP_FWD_DIR)/.stamp-unpacked
- cd $(DHCP_FWD_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_malloc_0_nonnull="yes" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --datadir=/usr/share \
- --infodir=/usr/share/info \
- --mandir=/usr/share/man \
- --localstatedir=/var \
- --sysconfdir=/etc \
- $(DISABLE_NLS) \
-
- touch $(DHCP_FWD_DIR)/.stamp-configured
-
-
-$(DHCP_FWD_DIR)/.stamp-built: $(DHCP_FWD_DIR)/.stamp-configured
- cd $(DHCP_FWD_DIR) ; \
- touch config.guess ; \
- touch config.sub ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- cfg_filename="/etc/dhcp-fwd.conf" \
- all \
-
- touch $(DHCP_FWD_DIR)/.stamp-built
-
-
-$(DHCP_FWD_BUILD_DIR)/CONTROL/control: $(DHCP_FWD_DIR)/.stamp-built
- rm -rf $(DHCP_FWD_BUILD_DIR)
- mkdir -p $(DHCP_FWD_BUILD_DIR)/usr/sbin
- cp -a $(DHCP_FWD_DIR)/dhcp-fwd $(DHCP_FWD_BUILD_DIR)/usr/sbin/
- $(STRIP) $(DHCP_FWD_BUILD_DIR)/usr/sbin/*
- cp -a $(DHCP_FWD_IPK_DIR)/root/* $(DHCP_FWD_BUILD_DIR)/
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/etc
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/etc/init.d
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/etc/init.d/*
- chmod 0644 $(DHCP_FWD_BUILD_DIR)/etc/dhcp-fwd.conf
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/usr
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/usr/sbin
- chmod 0755 $(DHCP_FWD_BUILD_DIR)/usr/sbin/*
- cp -a $(DHCP_FWD_IPK_DIR)/CONTROL $(DHCP_FWD_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(DHCP_FWD_VERSION)-$(DHCP_FWD_RELEASE)/" $(DHCP_FWD_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(DHCP_FWD_BUILD_DIR)/CONTROL/control
-
- touch $(DHCP_FWD_BUILD_DIR)/CONTROL/control
-
-
-$(DHCP_FWD_IPK): $(DHCP_FWD_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(DHCP_FWD_BUILD_DIR)
-
-
-dhcp-fwd-ipk: ipkg-utils $(DHCP_FWD_IPK)
-
-dhcp-fwd-clean:
- rm -rf $(DHCP_FWD_IPK)
- rm -rf $(DHCP_FWD_BUILD_DIR)
- rm -rf $(DHCP_FWD_DIR)
+++ /dev/null
-#############################################################
-#
-# dhcp_relay
-#
-#############################################################
-DHCP_RELAY_SOURCE:=dhcp-3.0pl2.tar.gz
-DHCP_RELAY_SITE:=ftp://ftp.isc.org/isc/dhcp
-DHCP_RELAY_CAT:=zcat
-DHCP_RELAY_DIR:=$(BUILD_DIR)/dhcp-3.0pl2
-DHCP_RELAY_BINARY:=work.linux-2.2/relay/dhcrelay
-DHCP_RELAY_TARGET_BINARY:=usr/sbin/dhcrelay
-BVARS=PREDEFINES='-D_PATH_DHCPD_DB=\"/var/lib/dhcp/dhcpd.leases\" \
- -D_PATH_DHCLIENT_DB=\"/var/lib/dhcp/dhclient.leases\"' \
- VARDB=/var/lib/dhcp
-
-$(DL_DIR)/$(DHCP_RELAY_SOURCE):
- $(WGET) -P $(DL_DIR) $(DHCP_RELAY_SITE)/$(DHCP_RELAY_SOURCE)
-
-dhcp_relay-source: $(DL_DIR)/$(DHCP_RELAY_SOURCE)
-
-$(DHCP_RELAY_DIR)/.unpacked: $(DL_DIR)/$(DHCP_RELAY_SOURCE)
- $(DHCP_RELAY_CAT) $(DL_DIR)/$(DHCP_RELAY_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(DHCP_RELAY_DIR)/.unpacked
-
-$(DHCP_RELAY_DIR)/.configured: $(DHCP_RELAY_DIR)/.unpacked
- (cd $(DHCP_RELAY_DIR); $(TARGET_CONFIGURE_OPTS) ./configure );
- touch $(DHCP_RELAY_DIR)/.configured
-
-$(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY): $(DHCP_RELAY_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) $(BVARS) -C $(DHCP_RELAY_DIR)
- $(STRIP) $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY)
-
-$(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY): $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY)
- (cd $(TARGET_DIR)/var/lib; ln -sf /tmp dhcp)
- cp -a $(DHCP_RELAY_DIR)/$(DHCP_RELAY_BINARY) $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-dhcp_relay: uclibc $(TARGET_DIR)/$(DHCP_RELAY_TARGET_BINARY)
-
-dhcp_relay-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(DHCP_RELAY_DIR) uninstall
- -$(MAKE) -C $(DHCP_RELAY_DIR) clean
-
-dhcp_relay-dirclean:
- rm -rf $(DHCP_RELAY_DIR)
-
+++ /dev/null
-#############################################################
-#
-# diffutils
-#
-#############################################################
-DIFFUTILS_SOURCE:=diffutils-2.8.4.tar.gz
-DIFFUTILS_SITE:=ftp://alpha.gnu.org/gnu/diffutils/
-DIFFUTILS_CAT:=zcat
-DIFFUTILS_DIR:=$(BUILD_DIR)/diffutils-2.8.4
-DIFFUTILS_BINARY:=src/diff
-DIFFUTILS_TARGET_BINARY:=usr/bin/diff
-
-$(DL_DIR)/$(DIFFUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(DIFFUTILS_SITE)/$(DIFFUTILS_SOURCE)
-
-diffutils-source: $(DL_DIR)/$(DIFFUTILS_SOURCE)
-
-$(DIFFUTILS_DIR)/.unpacked: $(DL_DIR)/$(DIFFUTILS_SOURCE)
- $(DIFFUTILS_CAT) $(DL_DIR)/$(DIFFUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(DIFFUTILS_DIR)/.unpacked
-
-$(DIFFUTILS_DIR)/.configured: $(DIFFUTILS_DIR)/.unpacked
- (cd $(DIFFUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(DIFFUTILS_DIR)/.configured
-
-$(DIFFUTILS_DIR)/$(DIFFUTILS_BINARY): $(DIFFUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(DIFFUTILS_DIR)
-
-$(TARGET_DIR)/$(DIFFUTILS_TARGET_BINARY): $(DIFFUTILS_DIR)/$(DIFFUTILS_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(DIFFUTILS_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-diffutils: uclibc $(TARGET_DIR)/$(DIFFUTILS_TARGET_BINARY)
-
-diffutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(DIFFUTILS_DIR) uninstall
- -$(MAKE) -C $(DIFFUTILS_DIR) clean
-
-diffutils-dirclean:
- rm -rf $(DIFFUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# dnsmasq
-#
-#############################################################
-
-DNSMASQ_SITE=http://thekelleys.org.uk/dnsmasq
-ifeq ($(filter $(TARGETS),dnsmasq1),)
-DNSMASQ_SOURCE=dnsmasq-2.19.tar.gz
-DNSMASQ_DIR=$(BUILD_DIR)/dnsmasq-2.19
-DNSMASQ_VER=dnsmasq2
-else
-DNSMASQ_SOURCE=dnsmasq-1.18.tar.gz
-DNSMASQ_DIR=$(BUILD_DIR)/dnsmasq-1.18
-DNSMASQ_VER=dnsmasq1
-endif
-DNSMASQ_BINARY=dnsmasq
-DNSMASQ_TARGET_BINARY=usr/sbin/dnsmasq
-
-$(DL_DIR)/$(DNSMASQ_SOURCE):
- $(WGET) -P $(DL_DIR) $(DNSMASQ_SITE)/$(DNSMASQ_SOURCE)
-
-$(DNSMASQ_DIR)/.source: $(DL_DIR)/$(DNSMASQ_SOURCE)
- zcat $(DL_DIR)/$(DNSMASQ_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SOURCE_DIR)/patch-kernel.sh $(DNSMASQ_DIR) $(SOURCE_DIR) \
- $(DNSMASQ_VER)-*.patch
- touch $(DNSMASQ_DIR)/.source
-
-$(DNSMASQ_DIR)/$(DNSMASQ_BINARY): $(DNSMASQ_DIR)/.source
- $(MAKE) CC=$(TARGET_CC) CFLAGS="$(TARGET_CFLAGS)" \
- BINDIR=/usr/sbin MANDIR=/usr/man -C $(DNSMASQ_DIR)
-
-$(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY): $(DNSMASQ_DIR)/$(DNSMASQ_BINARY)
- $(MAKE) BINDIR=/usr/sbin MANDIR=/usr/man \
- DESTDIR=$(TARGET_DIR) -C $(DNSMASQ_DIR) install
- $(STRIP) $(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY)
- rm -rf $(TARGET_DIR)/usr/man
-
-dnsmasq: uclibc $(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY)
-
-dnsmasq1: uclibc $(TARGET_DIR)/$(DNSMASQ_TARGET_BINARY)
-
-dnsmasq-source: $(DL_DIR)/$(DNSMASQ_SOURCE)
-
-dnsmasq-clean:
- #$(MAKE) prefix=$(TARGET_DIR)/usr -C $(DNSMASQ_DIR) uninstall
- -$(MAKE) -C $(DNSMASQ_DIR) clean
-
-dnsmasq-dirclean:
- rm -rf $(DNSMASQ_DIR)
+++ /dev/null
-######################################################
-#
-# An example makefile to fetch a package from sources
-# then fetch the ipkg updates required to the base package
-# extract the archives into the build tree
-# and then build the source
-#
-######################################################
-
-
-# For this example we'll use a fairly simple package that compiles easily
-# and has sources available for download at sourceforge
-DROPBEAR=dropbear-0.44
-DROPBEAR_TARGET=.built
-DROPBEAR_DIR=$(BUILD_DIR)/$(DROPBEAR)
-DROPBEAR_IPK=$(BUILD_DIR)/$(DROPBEAR)_mipsel.ipk
-DROPBEAR_IPK_DIR=$(BUILD_DIR)/$(DROPBEAR)-ipk
-
-DROPBEAR_SITE=http://matt.ucc.asn.au/dropbear/
-DROPBEAR_SOURCE=$(DROPBEAR).tar.bz2
-
-
-# We need to download sources if we dont have them
-$(DL_DIR)/$(DROPBEAR_SOURCE) :
- $(WGET) -P $(DL_DIR) $(DROPBEAR_SITE)/$(DROPBEAR_SOURCE)
-
-# if we have the sources, they do no good unless they are unpacked
-$(DROPBEAR_DIR)/.unpacked: $(DL_DIR)/$(DROPBEAR_SOURCE)
- bzcat $(DL_DIR)/$(DROPBEAR_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(SOURCE_DIR)/openwrt/ipkg/dropbear/dropbear.patch | patch -p1 -d $(DROPBEAR_DIR)
- touch $(DROPBEAR_DIR)/.unpacked
-
-# if we have the sources unpacked, we need to configure them
-$(DROPBEAR_DIR)/.configured: $(DROPBEAR_DIR)/.unpacked
- (cd $(DROPBEAR_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- LD=$(TARGET_CROSS)gcc \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --disable-zlib \
- );
- touch $(DROPBEAR_DIR)/.configured
-
-
-# now that we have it all in place, just build it
-$(DROPBEAR_DIR)/$(DROPBEAR_TARGET): $(DROPBEAR_DIR)/.configured
- mkdir -p $(DROPBEAR_IPK_DIR)/usr/bin
- cd $(DROPBEAR_DIR) && make PROGRAMS="dbclient dropbear" MULTI=1 && rm -f ssh && ln -s dbclient ssh
- $(STAGING_DIR)/bin/sstrip $(DROPBEAR_DIR)/dropbearmulti
- cd $(DROPBEAR_DIR) && cp -dpf dropbearmulti ssh dropbear dbclient $(DROPBEAR_IPK_DIR)/usr/bin
-
- cd $(DROPBEAR_DIR) && make SCPPROGRESS=1 scp
- $(STAGING_DIR)/bin/sstrip $(DROPBEAR_DIR)/scp
- cd $(DROPBEAR_DIR) && cp -dpf scp $(DROPBEAR_IPK_DIR)/usr/bin
-
- cd $(DROPBEAR_DIR) && make clean && make dropbearkey
- $(STAGING_DIR)/bin/sstrip $(DROPBEAR_DIR)/dropbearkey
- mkdir -p $(DROPBEAR_IPK_DIR)/tmp
- cd $(DROPBEAR_DIR) && cp -dpf dropbearkey $(DROPBEAR_IPK_DIR)/tmp/dropbearkey
- touch $(DROPBEAR_DIR)/$(DROPBEAR_TARGET)
-
-$(DROPBEAR_IPK): uclibc $(DROPBEAR_DIR)/$(DROPBEAR_TARGET)
- mkdir -p $(DROPBEAR_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/CONTROL/conffiles $(DROPBEAR_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/CONTROL/control $(DROPBEAR_IPK_DIR)/CONTROL
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/CONTROL/postinst $(DROPBEAR_IPK_DIR)/CONTROL
- mkdir -p $(DROPBEAR_IPK_DIR)/etc/init.d
- cp $(SOURCE_DIR)/openwrt/ipkg/dropbear/S51dropbear $(DROPBEAR_IPK_DIR)/etc/init.d
-
- cd $(BUILD_DIR); $(IPKG_BUILD) $(DROPBEAR_IPK_DIR)
-
-dropbear-ipk: $(DROPBEAR_IPK)
+++ /dev/null
-########################################################################
-#
-# ebtables
-#
-# Utility that enables basic Ethernet frame filtering on a Linux bridge,
-# MAC NAT and brouting.
-#
-########################################################################
-
-EBTABLES_NAME=ebtables
-EBTABLES_VERSION=v2.0.6
-EBTABLES_SOURCE=$(EBTABLES_NAME)-$(EBTABLES_VERSION).tar.gz
-#EBTABLES_SOURCE_URL=http://unc.dl.sourceforge.net/sourceforge/$(EBTABLES_NAME)/
-EBTABLES_SOURCE_URL=http://aleron.dl.sourceforge.net/sourceforge/$(EBTABLES_NAME)/
-EBTABLES_BUILD_DIR=$(BUILD_DIR)/$(EBTABLES_NAME)-$(EBTABLES_VERSION)
-
-$(DL_DIR)/$(EBTABLES_SOURCE):
- $(WGET) -P $(DL_DIR) $(EBTABLES_SOURCE_URL)/$(EBTABLES_SOURCE)
-
-$(EBTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(EBTABLES_SOURCE)
- zcat $(DL_DIR)/$(EBTABLES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(EBTABLES_BUILD_DIR)/.unpacked
-
-$(EBTABLES_BUILD_DIR)/.configured: $(EBTABLES_BUILD_DIR)/.unpacked
- # Allow patches. Needed for openwrt for instance.
- $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR)/../.. $(SOURCE_DIR) $(EBTABLES_NAME)-*.patch
- touch $(EBTABLES_BUILD_DIR)/.configured
-
-$(EBTABLES_BUILD_DIR)/$(EBTABLES_NAME): $(EBTABLES_BUILD_DIR)/.configured
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(EBTABLES_BUILD_DIR) \
- CC=$(TARGET_CC) CFLAGS="$(TARGET_CFLAGS)" \
- LDFLAGS="$(TARGET_LDFLAGS)"
-
-$(TARGET_DIR)/sbin/$(EBTABLES_NAME): $(EBTABLES_BUILD_DIR)/$(EBTABLES_NAME)
- mkdir -p $(TARGET_DIR)/sbin/
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(EBTABLES_BUILD_DIR) \
- MANDIR=$(TARGET_DIR)/usr/share/man \
- ETHERTYPESPATH=${D}/etc/ \
- BINPATH=$(TARGET_DIR)/sbin/ \
- CC=$(TARGET_CC) \
- CFLAGS="$(TARGET_CFLAGS)" \
- install
- $(STRIP) $(TARGET_DIR)/sbin/$(EBTABLES_NAME)
- rm -rf $(TARGET_DIR)/usr/share/man
-
-$(EBTABLES_NAME): $(TARGET_DIR)/sbin/$(EBTABLES_NAME)
-
-$(EBTABLES_NAME)-source: $(DL_DIR)/$(EBTABLES_SOURCE)
-
-$(EBTABLES_NAME)-clean:
- -$(MAKE) -C $(EBTABLES_BUILD_DIR) clean
-
-$(EBTABLES_NAME)-dirclean:
- rm -rf $(EBTABLES_BUILD_DIR)
+++ /dev/null
-#############################################################
-#
-# ed
-#
-#############################################################
-ED_SOURCE:=ed_0.2.orig.tar.gz
-ED_PATCH:=ed_0.2-19.diff.gz
-ED_SITE:=http://ftp.debian.org/debian/pool/main/e/ed
-ED_CAT:=zcat
-ED_DIR:=$(BUILD_DIR)/ed-0.2
-ED_BINARY:=ed
-ED_TARGET_BINARY:=bin/ed
-
-$(DL_DIR)/$(ED_SOURCE):
- $(WGET) -P $(DL_DIR) $(ED_SITE)/$(ED_SOURCE)
-
-$(DL_DIR)/$(ED_PATCH):
- $(WGET) -P $(DL_DIR) $(ED_SITE)/$(ED_PATCH)
-
-ed-source: $(DL_DIR)/$(ED_SOURCE) $(DL_DIR)/$(ED_PATCH)
-
-$(ED_DIR)/.unpacked: $(DL_DIR)/$(ED_SOURCE) $(DL_DIR)/$(ED_PATCH)
- $(ED_CAT) $(DL_DIR)/$(ED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SOURCE_DIR)/patch-kernel.sh $(ED_DIR) $(DL_DIR) $(ED_PATCH)
- touch $(ED_DIR)/.unpacked
-
-$(ED_DIR)/.configured: $(ED_DIR)/.unpacked
- (cd $(ED_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- $(DISABLE_NLS) \
- );
- touch $(ED_DIR)/.configured
-
-$(ED_DIR)/$(ED_BINARY): $(ED_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(ED_DIR)
-
-$(TARGET_DIR)/$(ED_TARGET_BINARY): $(ED_DIR)/$(ED_BINARY)
- cp -a $(ED_DIR)/$(ED_BINARY) $(TARGET_DIR)/$(ED_TARGET_BINARY)
-
-ed: uclibc $(TARGET_DIR)/$(ED_TARGET_BINARY)
-
-ed-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(ED_DIR) uninstall
- -$(MAKE) -C $(ED_DIR) clean
-
-ed-dirclean:
- rm -rf $(ED_DIR)
-
+++ /dev/null
-#############################################################
-#
-# genext2fs to build to target ext2 filesystems
-#
-#############################################################
-GENEXT2_DIR=$(BUILD_DIR)/genext2fs-1.3
-GENEXT2_SOURCE=genext2fs_1.3.orig.tar.gz
-GENEXT2_SITE=http://ftp.debian.org/debian/pool/main/g/genext2fs
-GENEXT2_PATCH=$(SOURCE_DIR)/genext2fs.patch
-
-$(DL_DIR)/$(GENEXT2_SOURCE):
- $(WGET) -P $(DL_DIR) $(GENEXT2_SITE)/$(GENEXT2_SOURCE)
-
-$(GENEXT2_DIR): $(DL_DIR)/$(GENEXT2_SOURCE) $(GENEXT2_PATCH)
- zcat $(DL_DIR)/$(GENEXT2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(GENEXT2_DIR).orig $(GENEXT2_DIR)
- cat $(GENEXT2_PATCH) | patch -p1 -d $(GENEXT2_DIR)
-
-$(GENEXT2_DIR)/genext2fs: $(GENEXT2_DIR)
- $(MAKE) CFLAGS="-Wall -O2 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE \
- -D_FILE_OFFSET_BITS=64" -C $(GENEXT2_DIR);
- touch -c $(GENEXT2_DIR)/genext2fs
-
-genext2fs: $(GENEXT2_DIR)/genext2fs
-
-
-
-#############################################################
-#
-# Build the ext2 root filesystem image
-#
-#############################################################
-
-# How much KB we want to add to the calculated size for slack space
-#GENEXT2_ADDTOROOTSIZE=4096
-GENEXT2_ADDTOROOTSIZE=16384
-GENEXT2_REALSIZE=$(subst total,, $(shell LANG=C du $(TARGET_DIR) -s -c -k | grep total ))
-GENEXT2_SIZE=$(shell expr $(GENEXT2_REALSIZE) + $(GENEXT2_ADDTOROOTSIZE))
-# We currently add about 400 device nodes, so add that into the total
-GENEXT2_INODES=$(shell expr $(shell find $(TARGET_DIR) | wc -l) + 400)
-#GENEXT2_SIZE=100000
-
-ext2root: genext2fs
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true;
- $(GENEXT2_DIR)/genext2fs -i $(GENEXT2_INODES) -b $(GENEXT2_SIZE) \
- -d $(TARGET_DIR) -q -D $(SOURCE_DIR)/device_table.txt $(IMAGE)
-
-ext2root-source: $(DL_DIR)/$(GENEXT2_SOURCE)
-
-ext2root-clean:
- -$(MAKE) -C $(GENEXT2_DIR) clean
-
-ext2root-dirclean:
- rm -rf $(GENEXT2_DIR)
-
+++ /dev/null
-#############################################################
-#
-# fakeroot
-#
-#############################################################
-FAKEROOT_SOURCE:=fakeroot_0.7.5.tar.gz
-FAKEROOT_SITE:=http://ftp.debian.org/debian/pool/main/f/fakeroot
-FAKEROOT_CAT:=zcat
-FAKEROOT_DIR:=$(BUILD_DIR)/fakeroot-0.7.5
-
-
-$(DL_DIR)/$(FAKEROOT_SOURCE):
- $(WGET) -P $(DL_DIR) $(FAKEROOT_SITE)/$(FAKEROOT_SOURCE)
-
-fakeroot-source: $(DL_DIR)/$(FAKEROOT_SOURCE)
-
-$(FAKEROOT_DIR)/.unpacked: $(DL_DIR)/$(FAKEROOT_SOURCE)
- $(FAKEROOT_CAT) $(DL_DIR)/$(FAKEROOT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # If using busybox getopt, make it be quiet.
- $(SED) "s,getopt --version,getopt --version 2>/dev/null," \
- $(FAKEROOT_DIR)/scripts/fakeroot
- touch $(FAKEROOT_DIR)/.unpacked
-
-$(FAKEROOT_DIR)/.configured: $(FAKEROOT_DIR)/.unpacked
- (cd $(FAKEROOT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libdir=/usr/lib/libfakeroot \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(FAKEROOT_DIR)/.configured
-
-$(FAKEROOT_DIR)/faked: $(FAKEROOT_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(FAKEROOT_DIR)
-
-$(TARGET_DIR)/usr/bin/fakeroot: $(FAKEROOT_DIR)/faked
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(FAKEROOT_DIR) install
- -mv $(TARGET_DIR)/usr/bin/$(ARCH)-linux-faked $(TARGET_DIR)/usr/bin/faked
- -mv $(TARGET_DIR)/usr/bin/$(ARCH)-linux-fakeroot $(TARGET_DIR)/usr/bin/fakeroot
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-fakeroot: uclibc $(TARGET_DIR)/usr/bin/fakeroot
-
-fakeroot-clean:
- $(MAKE) -C $(FAKEROOT_DIR) clean
-
-fakeroot-dirclean:
- rm -rf $(FAKEROOT_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# file
-#
-#############################################################
-FILE_SOURCE:=file-4.08.tar.gz
-FILE_SITE:=ftp://ftp.astron.com/pub/file
-FILE_DIR:=$(BUILD_DIR)/file-4.08
-FILE_CAT:=zcat
-FILE_BINARY:=src/file
-FILE_TARGET_BINARY:=usr/bin/file
-
-$(DL_DIR)/$(FILE_SOURCE):
- $(WGET) -P $(DL_DIR) $(FILE_SITE)/$(FILE_SOURCE)
-
-file-source: $(DL_DIR)/$(FILE_SOURCE)
-
-$(FILE_DIR)/.unpacked: $(DL_DIR)/$(FILE_SOURCE)
- $(FILE_CAT) $(DL_DIR)/$(FILE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(SOURCE_DIR)/file.patch | patch -p1 -d $(FILE_DIR)
- touch $(FILE_DIR)/.unpacked
-
-$(FILE_DIR)/.configured: $(FILE_DIR)/.unpacked
- (cd $(FILE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share/misc \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --disable-fsect-man5 \
- );
- touch $(FILE_DIR)/.configured
-
-$(FILE_DIR)/$(FILE_BINARY): $(FILE_DIR)/.configured
- $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(FILE_DIR)
-
-$(TARGET_DIR)/$(FILE_TARGET_BINARY): $(FILE_DIR)/$(FILE_BINARY)
- $(MAKE) $(TARGET_CONFIGURE_OPTS) DESTDIR=$(TARGET_DIR) -C $(FILE_DIR) install
- -($(STRIP) $(TARGET_DIR)/usr/lib/libmagic.so.*.* > /dev/null 2>&1)
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-file: zlib uclibc $(TARGET_DIR)/$(FILE_TARGET_BINARY)
-
-file-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(FILE_DIR) uninstall
- -$(MAKE) -C $(FILE_DIR) clean
-
-file-dirclean:
- rm -rf $(FILE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# findutils
-#
-#############################################################
-FINDUTILS_SOURCE:=findutils_4.1.7.orig.tar.gz
-FINDUTILS_SITE:=http://ftp.debian.org/debian/pool/main/f/findutils
-FINDUTILS_CAT:=zcat
-FINDUTILS_DIR:=$(BUILD_DIR)/findutils-4.1.7
-FINDUTILS_BINARY:=find/find
-FINDUTILS_TARGET_BINARY:=usr/bin/find
-
-$(DL_DIR)/$(FINDUTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(FINDUTILS_SITE)/$(FINDUTILS_SOURCE)
-
-findutils-source: $(DL_DIR)/$(FINDUTILS_SOURCE)
-
-$(FINDUTILS_DIR)/.unpacked: $(DL_DIR)/$(FINDUTILS_SOURCE)
- $(FINDUTILS_CAT) $(DL_DIR)/$(FINDUTILS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(FINDUTILS_DIR).orig $(FINDUTILS_DIR)
- touch $(FINDUTILS_DIR)/.unpacked
-
-$(FINDUTILS_DIR)/.configured: $(FINDUTILS_DIR)/.unpacked
- (cd $(FINDUTILS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_setvbuf_reversed=no \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(FINDUTILS_DIR)/.configured
-
-$(FINDUTILS_DIR)/$(FINDUTILS_BINARY): $(FINDUTILS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(FINDUTILS_DIR)
-
-# This stuff is needed to work around GNU make deficiencies
-findutils-target_binary: $(FINDUTILS_DIR)/$(FINDUTILS_BINARY)
- @if [ -L $(TARGET_DIR)/$(FINDUTILS_TARGET_BINARY) ] ; then \
- rm -f $(TARGET_DIR)/$(FINDUTILS_TARGET_BINARY); fi;
- @if [ ! -f $(FINDUTILS_DIR)/$(FINDUTILS_BINARY) -o $(TARGET_DIR)/$(FINDUTILS_TARGET_BINARY) \
- -ot $(FINDUTILS_DIR)/$(FINDUTILS_BINARY) ] ; then \
- set -x; \
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(FINDUTILS_DIR) install; \
- $(STRIP) $(TARGET_DIR)/usr/lib/locate/* > /dev/null 2>&1; \
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc; fi;
-
-findutils: uclibc findutils-target_binary
-
-findutils-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(FINDUTILS_DIR) uninstall
- -$(MAKE) -C $(FINDUTILS_DIR) clean
-
-findutils-dirclean:
- rm -rf $(FINDUTILS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# flex
-#
-#############################################################
-FLEX_SOURCE:=flex_2.5.4a.orig.tar.gz
-FLEX_PATCH:=flex_2.5.4a-24.diff.gz
-FLEX_SITE:=http://ftp.debian.org/debian/pool/main/f/flex
-FLEX_DIR:=$(BUILD_DIR)/flex-2.5.4
-FLEX_CAT:=zcat
-FLEX_BINARY:=flex
-FLEX_TARGET_BINARY:=usr/bin/flex
-
-$(DL_DIR)/$(FLEX_SOURCE):
- $(WGET) -P $(DL_DIR) $(FLEX_SITE)/$(FLEX_SOURCE)
-
-$(DL_DIR)/$(FLEX_PATCH):
- $(WGET) -P $(DL_DIR) $(FLEX_SITE)/$(FLEX_PATCH)
-
-flex-source: $(DL_DIR)/$(FLEX_SOURCE) $(DL_DIR)/$(FLEX_PATCH)
-
-$(FLEX_DIR)/.unpacked: $(DL_DIR)/$(FLEX_SOURCE) $(DL_DIR)/$(FLEX_PATCH)
- $(FLEX_CAT) $(DL_DIR)/$(FLEX_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #$(SOURCE_DIR)/patch-kernel.sh $(FLEX_DIR) $(DL_DIR) $(FLEX_PATCH)
- touch $(FLEX_DIR)/.unpacked
-
-$(FLEX_DIR)/.configured: $(FLEX_DIR)/.unpacked
- (cd $(FLEX_DIR); autoconf; rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(FLEX_DIR)/.configured
-
-$(FLEX_DIR)/$(FLEX_BINARY): $(FLEX_DIR)/.configured
- $(MAKE) -C $(FLEX_DIR)
-
-$(TARGET_DIR)/$(FLEX_TARGET_BINARY): $(FLEX_DIR)/$(FLEX_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- sharedstatedir=$(TARGET_DIR)/usr/com \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(FLEX_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- (cd $(TARGET_DIR)/usr/bin; ln -s flex lex)
-
-flex: uclibc $(TARGET_DIR)/$(FLEX_TARGET_BINARY)
-
-flex-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(FLEX_DIR) uninstall
- -$(MAKE) -C $(FLEX_DIR) clean
-
-flex-dirclean:
- rm -rf $(FLEX_DIR)
-
+++ /dev/null
-## fprobe
-
-FPROBE_VERSION:=1.0.5
-FPROBE_RELEASE:=1
-
-FPROBE_SOURCE:=fprobe-$(FPROBE_VERSION).tar.bz2
-FPROBE_SITE:=http://dl.sourceforge.net/sourceforge/fprobe/
-FPROBE_DIR:=$(BUILD_DIR)/fprobe-$(FPROBE_VERSION)
-FPROBE_CAT:=bzcat
-
-FPROBE_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/fprobe
-
-FPROBE_BUILD_DIR := $(BUILD_DIR)/fprobe_$(FPROBE_VERSION)-$(FPROBE_RELEASE)
-FPROBE_IPK_DIR := $(OPENWRT_IPK_DIR)/fprobe
-FPROBE_IPK := $(FPROBE_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(FPROBE_SOURCE):
- $(WGET) -P $(DL_DIR) $(FPROBE_SITE)/$(FPROBE_SOURCE)
-
-
-$(FPROBE_DIR)/.stamp-unpacked: $(DL_DIR)/$(FPROBE_SOURCE)
- $(FPROBE_CAT) $(DL_DIR)/$(FPROBE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(FPROBE_DIR)/.stamp-unpacked
-
-
-$(FPROBE_DIR)/.stamp-configured: $(FPROBE_DIR)/.stamp-unpacked
- cd $(FPROBE_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- --includedir=/usr/include \
- --libdir=/usr/lib \
- $(DISABLE_NLS) \
- --with-membulk=index8 \
- --with-hash=xor8
-
- touch $(FPROBE_DIR)/.stamp-configured
-
-
-$(FPROBE_DIR)/.stamp-built: $(FPROBE_DIR)/.stamp-configured
- cd $(FPROBE_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
-
- touch $(FPROBE_DIR)/.stamp-built
-
-
-$(FPROBE_DIR)/.stamp-installed: $(FPROBE_DIR)/.stamp-built
- mkdir -p $(FPROBE_BUILD_DIR)
- cd $(FPROBE_DIR) ; \
- $(MAKE) \
- DESTDIR="$(FPROBE_BUILD_DIR)" \
- install \
-
- install -m0755 -d $(FPROBE_BUILD_DIR)/etc
- install -m0644 $(FPROBE_IPK_DIR)/root/etc/fprobe.conf $(FPROBE_BUILD_DIR)/etc/
-
- install -m0755 -d $(FPROBE_BUILD_DIR)/etc/init.d
- install -m0755 $(FPROBE_IPK_DIR)/root/etc/init.d/fprobe $(FPROBE_BUILD_DIR)/etc/init.d/
-
- rm -rf $(FPROBE_BUILD_DIR)/usr/share
-
- $(STRIP) $(FPROBE_BUILD_DIR)/usr/sbin/*
-
- touch $(FPROBE_DIR)/.stamp-installed
-
-
-$(FPROBE_IPK): $(FPROBE_DIR)/.stamp-installed
- cp -a $(FPROBE_IPK_DIR)/CONTROL $(FPROBE_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(FPROBE_VERSION)-$(FPROBE_RELEASE)/" $(FPROBE_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(FPROBE_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(FPROBE_BUILD_DIR)
-
-
-fprobe-source: $(DL_DIR)/$(FPROBE_SOURCE)
-
-fprobe-ipk: ipkg-utils libpcap-ipk $(FPROBE_IPK)
-
-fprobe-clean:
- $(MAKE) -C $(FPROBE_DIR) clean
-
-fprobe-clean-all:
- rm -rf $(FPROBE_DIR)
- rm -rf $(FPROBE_BUILD_DIR)
- rm -rf $(FPROBE_IPK)
+++ /dev/null
-#############################################################
-#
-# gawk
-#
-#############################################################
-GAWK_SOURCE:=gawk-3.1.2.tar.gz
-GAWK_SITE:=ftp://ftp.gnu.org/gnu/gawk
-GAWK_CAT:=zcat
-GAWK_DIR:=$(BUILD_DIR)/gawk-3.1.2
-GAWK_BINARY:=gawk
-GAWK_TARGET_BINARY:=usr/bin/gawk
-
-$(DL_DIR)/$(GAWK_SOURCE):
- $(WGET) -P $(DL_DIR) $(GAWK_SITE)/$(GAWK_SOURCE)
-
-gawk-source: $(DL_DIR)/$(GAWK_SOURCE)
-
-$(GAWK_DIR)/.unpacked: $(DL_DIR)/$(GAWK_SOURCE)
- $(GAWK_CAT) $(DL_DIR)/$(GAWK_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GAWK_DIR)/.unpacked
-
-$(GAWK_DIR)/.configured: $(GAWK_DIR)/.unpacked
- (cd $(GAWK_DIR); rm -rf config.cache; autoconf; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_func_getpgrp_void=yes \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(GAWK_DIR)/.configured
-
-$(GAWK_DIR)/$(GAWK_BINARY): $(GAWK_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GAWK_DIR)
-
-$(TARGET_DIR)/$(GAWK_TARGET_BINARY): $(GAWK_DIR)/$(GAWK_BINARY)
- rm -f $(TARGET_DIR)/usr/bin/awk
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GAWK_DIR) install
- rm -f $(TARGET_DIR)/usr/bin/gawk-*
- (cd $(TARGET_DIR)/usr/bin; ln -sf gawk awk)
- $(STRIP) $(TARGET_DIR)/usr/lib/awk/* > /dev/null 2>&1
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-gawk: uclibc $(TARGET_DIR)/$(GAWK_TARGET_BINARY)
-
-gawk-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GAWK_DIR) uninstall
- -$(MAKE) -C $(GAWK_DIR) clean
-
-gawk-dirclean:
- rm -rf $(GAWK_DIR)
-
+++ /dev/null
-# Makefile for to build a gcc/uClibc toolchain
-#
-# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-ifeq ($(GCC_2_95_TOOLCHAIN),true)
-
-GCC_SITE:=http://www.uclibc.org/downloads/toolchain
-GCC_SOURCE:=gcc-20011006.tar.bz2
-GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-20011006
-GCC_CAT:=bzcat
-
-STLPORT_SITE=http://www.stlport.org/archive
-STLPORT_SOURCE=STLport-4.5.3.tar.gz
-STLPORT_DIR=$(TOOL_BUILD_DIR)/STLport-4.5.3
-GCC_STRIP_HOST_BINARIES:=true
-
-#############################################################
-#
-# Setup some initial stuff
-#
-#############################################################
-
-ifeq ($(INSTALL_LIBSTDCPP),true)
-TARGET_LANGUAGES:=c,c++
-STLPORT_TARGET=stlport
-else
-TARGET_LANGUAGES:=c
-STLPORT_TARGET=
-endif
-
-#############################################################
-#
-# build the first pass gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc2_95-initial
-
-$(DL_DIR)/$(GCC_SOURCE):
- $(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
-
-$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
- $(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(GCC_DIR)/.unpacked
-
-$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
- # Apply any files named gcc-*.patch from the source directory to gcc
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc2.95-mega.patch.bz2
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc2.95-uclibc-conf.patch
- #$(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc2_95*.patch
- #
- # We do not wish to build the libstdc++ library provided with gcc,
- # since it doesn't seem to work at all with uClibc plus gcc 2.95...
- #
- mv $(GCC_DIR)/libstdc++ $(GCC_DIR)/libstdc++.orig
- mv $(GCC_DIR)/libio $(GCC_DIR)/libio.orig
- #
- touch $(GCC_DIR)/.patched
-
-# The --without-headers option stopped working with gcc 3.0 and has never been
-# # fixed, so we need to actually have working C library header files prior to
-# # the step or libgcc will not build...
-$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
- mkdir -p $(GCC_BUILD_DIR1)
- -mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include
- # Important! Required for limits.h to be fixed.
- ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
- (cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=c \
- --disable-shared \
- --includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \
- --with-headers=$(TOOL_BUILD_DIR)/uClibc_dev/usr/include \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR1)/.configured
-
-$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
- touch $(GCC_BUILD_DIR1)/.compiled
-
-$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
- #rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
- #rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
-
-gcc2_95_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
-
-gcc2_95_initial-clean:
- rm -rf $(GCC_BUILD_DIR1)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc2_95_initial-dirclean:
- rm -rf $(GCC_BUILD_DIR1)
-
-#############################################################
-#
-# STLport -- an alternative C++ library
-#
-#############################################################
-STLPORT_PATCH=$(SOURCE_DIR)/STLport-4.5.3.patch
-
-$(DL_DIR)/$(STLPORT_SOURCE):
- $(WGET) -P $(DL_DIR) $(STLPORT_SITE)/$(STLPORT_SOURCE)
-
-$(STLPORT_DIR)/Makefile: $(DL_DIR)/$(STLPORT_SOURCE) $(STLPORT_PATCH)
- zcat $(DL_DIR)/$(STLPORT_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- cat $(STLPORT_PATCH) | patch -d $(STLPORT_DIR) -p1
-
-$(STLPORT_DIR)/lib/libstdc++.a: $(STLPORT_DIR)/Makefile
- $(MAKE) ARCH=$(OPTIMIZE_FOR_CPU) PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME) -C $(STLPORT_DIR)
-
-$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.a: $(STLPORT_DIR)/lib/libstdc++.a
- $(MAKE) ARCH=$(OPTIMIZE_FOR_CPU) PREFIX=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME) -C $(STLPORT_DIR) install
-
-stlport: $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++.a
-
-stlport-source: $(DL_DIR)/$(STLPORT_SOURCE)
-
-stlport-clean:
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++*
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++*
- -$(MAKE) -C $(STLPORT_DIR) clean
-
-stlport-dirclean:
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libstdc++*
- rm -f $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/g++-v3*
- rm -rf $(STLPORT_DIR)
-
-#############################################################
-#
-# second pass compiler build. Build the compiler targeting
-# the newly built shared uClibc library.
-#
-#############################################################
-GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc2_95-final
-
-$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
- mkdir -p $(GCC_BUILD_DIR2)
- (cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR2)/.configured
-
-$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
- touch $(GCC_BUILD_DIR2)/.compiled
-
-$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
- # Strip the host binaries
-ifeq ($(GCC_STRIP_HOST_BINARIES),true)
- -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
-endif
- # Set up the symlinks to enable lying about target name.
- set -e; \
- (cd $(STAGING_DIR); \
- ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
- cd bin; \
- for app in $(REAL_GNU_TARGET_NAME)-* ; do \
- ln -sf $${app} \
- $(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
- done; \
- );
- touch $(GCC_BUILD_DIR2)/.installed
-
-gcc2_95: uclibc-configured binutils gcc2_95_initial $(LIBFLOAT_TARGET) uclibc \
- $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS) $(STLPORT_TARGET)
-
-gcc2_95-source: $(DL_DIR)/$(GCC_SOURCE)
-
-gcc2_95-clean:
- rm -rf $(GCC_BUILD_DIR2)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc2_95-dirclean:
- rm -rf $(GCC_BUILD_DIR2)
-
-#############################################################
-#
-# Next build target gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc2_95-target
-
-$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
- mkdir -p $(GCC_BUILD_DIR3)
- (cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=/usr \
- --build=$(GNU_HOST_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=/usr/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR3)/.configured
-
-$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
- touch $(GCC_BUILD_DIR3)/.compiled
-
-$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
- # Remove broken specs file (cross compile flag is set).
- rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
- -(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
- #
- rm -f $(TARGET_DIR)/usr/lib/*.la*
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Work around problem of missing syslimits.h
- cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/
- # These are in /lib, so...
- #rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
- #touch -c $(TARGET_DIR)/usr/bin/gcc
-
-gcc2_95_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
-
-gcc2_95_target-clean:
- rm -rf $(GCC_BUILD_DIR3)
- rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc2_95_target-dirclean:
- rm -rf $(GCC_BUILD_DIR3)
-
-endif
+++ /dev/null
-# Makefile for to build a gcc/uClibc toolchain
-#
-# Copyright (C) 2002-2003 Erik Andersen <andersen@uclibc.org>
-# Copyright (C) 2004 Manuel Novoa III <mjn3@uclibc.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-ifneq ($(GCC_2_95_TOOLCHAIN),true)
-
-# Shiny new stuff...
-GCC_VERSION:=3.3.3
-GCC_SITE:=ftp://ftp.gnu.org/gnu/gcc/releases/gcc-$(GCC_VERSION)
-#GCC_SITE:=http://www.binarycode.org/gcc/releases/gcc-$(GCC_VERSION)
-#GCC_SITE:=http://gcc.get-software.com/releases/gcc-$(GCC_VERSION)
-
-#
-# snapshots....
-#GCC_VERSION:=3.3-20031013
-#GCC_SITE:=http://gcc.get-software.com/snapshots/$(GCC_VERSION)
-#
-GCC_SOURCE:=gcc-$(GCC_VERSION).tar.bz2
-GCC_DIR:=$(TOOL_BUILD_DIR)/gcc-$(GCC_VERSION)
-GCC_CAT:=bzcat
-GCC_STRIP_HOST_BINARIES:=true
-
-#############################################################
-#
-# Setup some initial stuff
-#
-#############################################################
-
-ifeq ($(INSTALL_LIBGCJ),true)
-TARGET_LANGUAGES:=c,c++,java
-else
-ifeq ($(INSTALL_LIBSTDCPP),true)
-TARGET_LANGUAGES:=c,c++
-else
-TARGET_LANGUAGES:=c
-endif
-endif
-
-#############################################################
-#
-# build the first pass gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR1:=$(TOOL_BUILD_DIR)/gcc-3.3-initial
-
-$(DL_DIR)/$(GCC_SOURCE):
- $(WGET) -P $(DL_DIR) $(GCC_SITE)/$(GCC_SOURCE)
-
-$(GCC_DIR)/.unpacked: $(DL_DIR)/$(GCC_SOURCE)
- $(GCC_CAT) $(DL_DIR)/$(GCC_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- touch $(GCC_DIR)/.unpacked
-
-$(GCC_DIR)/.patched: $(GCC_DIR)/.unpacked
- # Apply any files named gcc-*.patch from the source directory to gcc
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc3.3-mega.patch.bz2
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) gcc-uclibc-3.3*.patch
-ifeq ($(SOFT_FLOAT),true)
-ifeq ("$(strip $(ARCH))","i386")
- $(SOURCE_DIR)/patch-kernel.sh $(GCC_DIR) $(SOURCE_DIR) i386-gcc-soft-float.patch
-endif
-endif
- touch $(GCC_DIR)/.patched
-
-# The --without-headers option stopped working with gcc 3.0 and has never been
-# # fixed, so we need to actually have working C library header files prior to
-# # the step or libgcc will not build...
-$(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
- mkdir -p $(GCC_BUILD_DIR1)
- -mkdir -p $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include
- (cd $(GCC_BUILD_DIR1); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=c \
- --disable-shared \
- --includedir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include \
- --with-sysroot=$(TOOL_BUILD_DIR)/uClibc_dev/ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR1)/.configured
-
-$(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) all-gcc
- touch $(GCC_BUILD_DIR1)/.compiled
-
-$(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc: $(GCC_BUILD_DIR1)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR1) install-gcc
- #rm -f $(STAGING_DIR)/bin/gccbug $(STAGING_DIR)/bin/gcov
- #rm -rf $(STAGING_DIR)/info $(STAGING_DIR)/man $(STAGING_DIR)/share/doc $(STAGING_DIR)/share/locale
-
-gcc3_3_initial: uclibc-configured binutils $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)-gcc
-
-gcc3_3_initial-clean:
- rm -rf $(GCC_BUILD_DIR1)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc3_3_initial-dirclean:
- rm -rf $(GCC_BUILD_DIR1)
-
-#############################################################
-#
-# second pass compiler build. Build the compiler targeting
-# the newly built shared uClibc library.
-#
-#############################################################
-GCC_BUILD_DIR2:=$(TOOL_BUILD_DIR)/gcc-3.3-final
-$(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/lib/libc.a
- mkdir -p $(GCC_BUILD_DIR2)
- # Important! Required for limits.h to be fixed.
- ln -sf include $(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/sys-include
- (cd $(GCC_BUILD_DIR2); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=$(STAGING_DIR) \
- --build=$(GNU_HOST_NAME) \
- --host=$(GNU_HOST_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=$(STAGING_DIR)/$(REAL_GNU_TARGET_NAME)/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(GCC_USE_SJLJ_EXCEPTIONS) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR2)/.configured
-
-$(GCC_BUILD_DIR2)/.compiled: $(GCC_BUILD_DIR2)/.configured
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) all
- touch $(GCC_BUILD_DIR2)/.compiled
-
-$(GCC_BUILD_DIR2)/.installed: $(GCC_BUILD_DIR2)/.compiled
- PATH=$(TARGET_PATH) $(MAKE) $(JLEVEL) -C $(GCC_BUILD_DIR2) install
- # Strip the host binaries
-ifeq ($(GCC_STRIP_HOST_BINARIES),true)
- -strip --strip-all -R .note -R .comment $(STAGING_DIR)/bin/*
-endif
- # Set up the symlinks to enable lying about target name.
- set -e; \
- (cd $(STAGING_DIR); \
- ln -sf $(REAL_GNU_TARGET_NAME) $(GNU_TARGET_NAME); \
- cd bin; \
- for app in $(REAL_GNU_TARGET_NAME)-* ; do \
- ln -sf $${app} \
- $(GNU_TARGET_NAME)$${app##$(REAL_GNU_TARGET_NAME)}; \
- done; \
- );
-ifeq ($(SOFT_FLOAT),true)
- # Replace specs file with one that defaults to soft float mode.
- if [ ! -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
- echo staging dir specs file is missing ; \
- /bin/false ; \
- fi;
- cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-endif
- touch $(GCC_BUILD_DIR2)/.installed
-
-gcc3_3: uclibc-configured binutils gcc3_3_initial $(LIBFLOAT_TARGET) uclibc \
- $(GCC_BUILD_DIR2)/.installed $(GCC_TARGETS)
-
-gcc3_3-source: $(DL_DIR)/$(GCC_SOURCE)
-
-gcc3_3-clean:
- rm -rf $(GCC_BUILD_DIR2)
- rm -f $(STAGING_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc3_3-dirclean:
- rm -rf $(GCC_BUILD_DIR2)
-
-#############################################################
-#
-# Next build target gcc compiler
-#
-#############################################################
-GCC_BUILD_DIR3:=$(BUILD_DIR)/gcc-3.3-target
-
-$(GCC_BUILD_DIR3)/.configured: $(GCC_BUILD_DIR2)/.installed
- mkdir -p $(GCC_BUILD_DIR3)
- (cd $(GCC_BUILD_DIR3); PATH=$(TARGET_PATH) \
- $(GCC_DIR)/configure \
- --prefix=/usr \
- --build=$(GNU_HOST_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --target=$(REAL_GNU_TARGET_NAME) \
- --enable-languages=$(TARGET_LANGUAGES) \
- --enable-shared \
- --with-gxx-include-dir=/usr/include/c++ \
- --disable-__cxa_atexit \
- --enable-target-optspace \
- --with-gnu-ld \
- $(DISABLE_NLS) \
- $(MULTILIB) \
- $(SOFT_FLOAT_CONFIG_OPTION) \
- $(GCC_USE_SJLJ_EXCEPTIONS) \
- $(EXTRA_GCC_CONFIG_OPTIONS));
- touch $(GCC_BUILD_DIR3)/.configured
-
-$(GCC_BUILD_DIR3)/.compiled: $(GCC_BUILD_DIR3)/.configured
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) $(TARGET_GCC_ARGS) -C $(GCC_BUILD_DIR3) all
- touch $(GCC_BUILD_DIR3)/.compiled
-
-$(TARGET_DIR)/usr/bin/gcc: $(GCC_BUILD_DIR3)/.compiled
- PATH=$(TARGET_PATH) \
- $(MAKE) $(JLEVEL) DESTDIR=$(TARGET_DIR) -C $(GCC_BUILD_DIR3) install
-ifeq ($(SOFT_FLOAT),true)
- # Replace specs file with one that defaults to soft float mode.
- if [ ! -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs ] ; then \
- echo target dir specs file is missing ; \
- /bin/false ; \
- fi;
- cp $(SOURCE_DIR)/specs-$(ARCH)-soft-float $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
- # Make sure gcc does not think we are cross compiling
- $(SED) "s/^1/0/;" $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-else
- # Remove broken specs file (cross compile flag is set).
- rm -f $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/specs
-endif
- -(cd $(TARGET_DIR)/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/bin; find -type f | xargs $(STRIP) > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION); $(STRIP) cc1 cc1plus collect2 > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/usr/lib; $(STRIP) libstdc++.so.*.*.* > /dev/null 2>&1)
- -(cd $(TARGET_DIR)/lib; $(STRIP) libgcc_s.so.*.*.* > /dev/null 2>&1)
- #
- rm -f $(TARGET_DIR)/usr/lib/*.la*
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Work around problem of missing syslimits.h
- cp -f $(STAGING_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/syslimits.h $(TARGET_DIR)/usr/lib/gcc-lib/$(REAL_GNU_TARGET_NAME)/$(GCC_VERSION)/include/
- # These are in /lib, so...
- #rm -rf $(TARGET_DIR)/usr/lib/libgcc_s.so*
- #touch -c $(TARGET_DIR)/usr/bin/gcc
-
-gcc3_3_target: uclibc_target binutils_target $(TARGET_DIR)/usr/bin/gcc
-
-gcc3_3_target-clean:
- rm -rf $(GCC_BUILD_DIR3)
- rm -f $(TARGET_DIR)/bin/$(REAL_GNU_TARGET_NAME)*
-
-gcc3_3_target-dirclean:
- rm -rf $(GCC_BUILD_DIR3)
-
-endif
+++ /dev/null
-#############################################################
-#
-# gdb
-#
-#############################################################
-
-GDB_SITE:=ftp://ftp.gnu.org/gnu/gdb/
-GDB_DIR:=$(BUILD_DIR)/gdb-5.3
-GDB_SOURCE:=gdb-5.3.tar.gz
-GDB_PATCH:=$(SOURCE_DIR)/gdb.patch
-GDB_UCLIBC_PATCH:=$(SOURCE_DIR)/gdb-5.3-uclibc.patch
-
-$(DL_DIR)/$(GDB_SOURCE):
- $(WGET) -P $(DL_DIR) $(GDB_SITE)/$(GDB_SOURCE)
-
-$(GDB_DIR)/.unpacked: $(DL_DIR)/$(GDB_SOURCE) $(GDB_PATCH)
- gunzip -c $(DL_DIR)/$(GDB_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(GDB_PATCH) | patch -p1 -d $(GDB_DIR)
- cat $(GDB_UCLIBC_PATCH) | patch -p1 -d $(GDB_DIR)
- touch $(GDB_DIR)/.unpacked
-
-$(GDB_DIR)/.configured: $(GDB_DIR)/.unpacked
- # Copy a config.sub from gcc. This is only necessary until
- # gdb's config.sub supports <arch>-linux-uclibc tuples.
- cp $(GCC_DIR)/config.sub $(GDB_DIR)
- cp $(GCC_DIR)/config.sub $(GDB_DIR)/readline/support/
- (cd $(GDB_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_type_uintptr_t=yes \
- gt_cv_func_gettext_libintl=yes \
- ac_cv_func_dcgettext=yes \
- gdb_cv_func_sigsetjmp=yes \
- bash_cv_func_strcoll_broken=no \
- bash_cv_must_reinstall_sighandlers=no \
- bash_cv_func_sigsetjmp=present \
- ./configure \
- --target=$(REAL_GNU_TARGET_NAME) \
- --host=$(REAL_GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --includedir=$(STAGING_DIR)/include \
- $(DISABLE_NLS) \
- --without-uiout --disable-gdbmi \
- --disable-tui --disable-gdbtk --without-x \
- --disable-sim --enable-gdbserver \
- --without-included-gettext \
- );
-ifeq ($(ENABLE_LOCALE),true)
- -$(SED) "s,^INTL *=.*,INTL = -lintl,g;" $(GDB_DIR)/gdb/Makefile
-endif
- touch $(GDB_DIR)/.configured
-
-$(GDB_DIR)/gdb/gdb: $(GDB_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GDB_DIR)
- $(STRIP) $(GDB_DIR)/gdb/gdb
-
-$(TARGET_DIR)/usr/bin/gdb: $(GDB_DIR)/gdb/gdb
- install -c $(GDB_DIR)/gdb/gdb $(TARGET_DIR)/usr/bin/gdb
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-gdb: $(TARGET_DIR)/usr/bin/gdb
-
-gdb-source: $(DL_DIR)/$(GDB_SOURCE)
-
-gdb-clean:
- $(MAKE) -C $(GDB_DIR) clean
-
-gdb-dirclean:
- rm -rf $(GDB_DIR)
-
+++ /dev/null
-#############################################################
-#
-# gdbserver
-#
-#############################################################
-
-#Use GDB_DIR/etc values from gdb.mk
-#Build gdbserver in a dir outside of the main gdb tree
-GDB_WDIR:=$(BUILD_DIR)/gdbserver
-
-
-$(GDB_WDIR)/.configured: $(GDB_DIR)/.unpacked
- mkdir -p $(GDB_WDIR)
- (cd $(GDB_WDIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- $(GDB_DIR)/gdb/gdbserver/configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --includedir=$(STAGING_DIR)/include \
- $(DISABLE_NLS) \
- --without-uiout --disable-gdbmi \
- --disable-tui --disable-gdbtk --without-x \
- --without-included-gettext \
- );
- touch $(GDB_WDIR)/.configured
-
-$(GDB_WDIR)/gdbserver: $(GDB_WDIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GDB_WDIR)
- $(STRIP) $(GDB_WDIR)/gdbserver
-
-$(TARGET_DIR)/usr/bin/gdbserver: $(GDB_WDIR)/gdbserver
- install -c $(GDB_WDIR)/gdbserver $(TARGET_DIR)/usr/bin/gdbserver
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-gdbserver: $(TARGET_DIR)/usr/bin/gdbserver
-
-gdbserver-clean:
- $(MAKE) -C $(GDB_WDIR) clean
-
-gdbserver-dirclean:
- rm -rf $(GDB_WDIR)
-
+++ /dev/null
-#############################################################
-#
-# gettext
-#
-#############################################################
-GETTEXT_SOURCE:=gettext-0.11.5.tar.gz
-GETTEXT_SITE:=ftp://ftp.gnu.org/gnu/gettext
-GETTEXT_DIR:=$(BUILD_DIR)/gettext-0.11.5
-GETTEXT_CAT:=zcat
-GETTEXT_BINARY:=gettext
-GETTEXT_TARGET_BINARY:=usr/bin/gettext
-
-$(DL_DIR)/$(GETTEXT_SOURCE):
- $(WGET) -P $(DL_DIR) $(GETTEXT_SITE)/$(GETTEXT_SOURCE)
-
-gettext-source: $(DL_DIR)/$(GETTEXT_SOURCE)
-
-$(GETTEXT_DIR)/.unpacked: $(DL_DIR)/$(GETTEXT_SOURCE)
- $(GETTEXT_CAT) $(DL_DIR)/$(GETTEXT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GETTEXT_DIR)/.unpacked
-
-$(GETTEXT_DIR)/.configured: $(GETTEXT_DIR)/.unpacked
- (cd $(GETTEXT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(GETTEXT_DIR)/.configured
-
-$(GETTEXT_DIR)/$(GETTEXT_BINARY): $(GETTEXT_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GETTEXT_DIR)
-
-$(TARGET_DIR)/$(GETTEXT_TARGET_BINARY): $(GETTEXT_DIR)/$(GETTEXT_BINARY)
- $(MAKE) DESTDIR=$(STAGING_DIR) CC=$(TARGET_CC) -C $(GETTEXT_DIR) install
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GETTEXT_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc \
- $(TARGET_DIR)/usr/doc
-
-gettext: uclibc $(TARGET_DIR)/$(GETTEXT_TARGET_BINARY)
-
-gettext-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GETTEXT_DIR) uninstall
- -$(MAKE) -C $(GETTEXT_DIR) clean
-
-gettext-dirclean:
- rm -rf $(GETTEXT_DIR)
-
+++ /dev/null
-#############################################################
-#
-# grep
-#
-#############################################################
-GNUGREP_SOURCE:=grep_2.5.1.ds1.orig.tar.gz
-GNUGREP_SITE:=http://ftp.debian.org/debian/pool/main/g/grep/
-GNUGREP_DIR:=$(BUILD_DIR)/grep-2.5.1
-GNUGREP_CAT:=zcat
-GNUGREP_BINARY:=src/grep
-GNUGREP_TARGET_BINARY:=bin/grep
-
-$(DL_DIR)/$(GNUGREP_SOURCE):
- $(WGET) -P $(DL_DIR) $(GNUGREP_SITE)/$(GNUGREP_SOURCE)
-
-grep-source: $(DL_DIR)/$(GNUGREP_SOURCE)
-
-$(GNUGREP_DIR)/.unpacked: $(DL_DIR)/$(GNUGREP_SOURCE)
- rm -rf $(GNUGREP_DIR).xxx
- $(GNUGREP_CAT) $(DL_DIR)/$(GNUGREP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv $(GNUGREP_DIR) $(GNUGREP_DIR).xxx
- $(GNUGREP_CAT) $(GNUGREP_DIR).xxx/grep_2.5.1.tar.gz | tar -C $(BUILD_DIR) -xvf -
- rm -rf $(GNUGREP_DIR).xxx
- touch $(GNUGREP_DIR)/.unpacked
-
-$(GNUGREP_DIR)/.configured: $(GNUGREP_DIR)/.unpacked
- (cd $(GNUGREP_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- --disable-perl-regexp \
- --without-included-regex \
- );
- touch $(GNUGREP_DIR)/.configured
-
-$(GNUGREP_DIR)/$(GNUGREP_BINARY): $(GNUGREP_DIR)/.configured
- $(MAKE) -C $(GNUGREP_DIR)
-
-# This stuff is needed to work around GNU make deficiencies
-grep-target_binary: $(GNUGREP_DIR)/$(GNUGREP_BINARY)
- @if [ -L $(TARGET_DIR)/$(GNUGREP_TARGET_BINARY) ] ; then \
- rm -f $(TARGET_DIR)/$(GNUGREP_TARGET_BINARY); fi;
- @if [ ! -f $(GNUGREP_DIR)/$(GNUGREP_BINARY) -o $(TARGET_DIR)/$(GNUGREP_TARGET_BINARY) -ot \
- $(GNUGREP_DIR)/$(GNUGREP_BINARY) ] ; then \
- set -x; \
- rm -f $(TARGET_DIR)/bin/grep $(TARGET_DIR)/bin/egrep $(TARGET_DIR)/bin/fgrep; \
- cp -a $(GNUGREP_DIR)/src/grep $(GNUGREP_DIR)/src/egrep \
- $(GNUGREP_DIR)/src/fgrep $(TARGET_DIR)/bin/; fi
-
-grep: uclibc grep-target_binary
-
-grep-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUGREP_DIR) uninstall
- -$(MAKE) -C $(GNUGREP_DIR) clean
-
-grep-dirclean:
- rm -rf $(GNUGREP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# gzip
-#
-#############################################################
-GZIP_SOURCE:=gzip-1.3.5.tar.gz
-GZIP_SITE:=ftp://alpha.gnu.org/gnu/gzip
-GZIP_DIR:=$(BUILD_DIR)/gzip-1.3.5
-GZIP_CAT:=zcat
-GZIP_BINARY:=$(GZIP_DIR)/gzip
-GZIP_TARGET_BINARY:=$(TARGET_DIR)/bin/zmore
-
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),false)
-GZIP_LARGEFILE="--disable-largefile"
-endif
-
-$(DL_DIR)/$(GZIP_SOURCE):
- $(WGET) -P $(DL_DIR) $(GZIP_SITE)/$(GZIP_SOURCE)
-
-gzip-source: $(DL_DIR)/$(GZIP_SOURCE)
-
-$(GZIP_DIR)/.unpacked: $(DL_DIR)/$(GZIP_SOURCE)
- $(GZIP_CAT) $(DL_DIR)/$(GZIP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GZIP_DIR)/.unpacked
-
-$(GZIP_DIR)/.configured: $(GZIP_DIR)/.unpacked
- (cd $(GZIP_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/ \
- --bindir=/bin \
- --sbindir=/bin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share/misc \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(GZIP_LARGEFILE) \
- );
- touch $(GZIP_DIR)/.configured
-
-$(GZIP_BINARY): $(GZIP_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(GZIP_DIR)
-
-$(GZIP_TARGET_BINARY): $(GZIP_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GZIP_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- (cd $(TARGET_DIR)/bin; \
- ln -sf gzip gunzip; \
- ln -sf gzip zcat; \
- ln -sf zdiff zcmp; \
- ln -sf zgrep zegrep; \
- ln -sf zgrep zfgrep;)
-
-gzip: uclibc $(GZIP_TARGET_BINARY)
-
-gzip-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(GZIP_DIR) uninstall
- -$(MAKE) -C $(GZIP_DIR) clean
-
-gzip-dirclean:
- rm -rf $(GZIP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# hostap
-#
-#############################################################
-HOSTAP_SOURCE_URL=http://hostap.epitest.fi/cgi-bin/viewcvs.cgi/hostap/hostap.tar.gz?tarball=1
-HOSTAP_SOURCE=hostap.tar.gz
-HOSTAP_DIR=$(BUILD_DIR)/hostap-snapshot
-
-$(DL_DIR)/$(HOSTAP_SOURCE):
- $(WGET) -P $(DL_DIR) $(HOSTAP_SOURCE_URL) -O $(DL_DIR)/$(HOSTAP_SOURCE)
-
-hostap-source: $(DL_DIR)/$(HOSTAP_SOURCE)
-
-$(HOSTAP_DIR)/.unpacked: $(DL_DIR)/$(HOSTAP_SOURCE)
- zcat $(DL_DIR)/$(HOSTAP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- mv -f $(BUILD_DIR)/hostap $(HOSTAP_DIR)
- touch $(HOSTAP_DIR)/.unpacked
-
-$(HOSTAP_DIR)/.configured: $(HOSTAP_DIR)/.unpacked
- #$(SED) "s,/.*#define PRISM2_DOWNLOAD_SUPPORT.*/,#define PRISM2_DOWNLOAD_SUPPORT,g" \
- # $(HOSTAP_DIR)/driver/modules/hostap_config.h
- touch $(HOSTAP_DIR)/.configured
-
-$(HOSTAP_DIR)/utils/hostap_crypt_conf: $(HOSTAP_DIR)/.configured
- $(MAKE) -C $(HOSTAP_DIR)/utils CC=$(TARGET_CC) CFLAGS="-Os -Wall $(TARGET_CFLAGS) -I../driver/modules"
- $(MAKE) -C $(HOSTAP_DIR)/hostapd CC=$(TARGET_CC) CFLAGS="-Os -Wall $(TARGET_CFLAGS) -I../driver/modules -I../utils"
- touch -c $(HOSTAP_DIR)/driver/modules/hostap.o
-
-$(TARGET_DIR)//usr/bin/hostap_crypt_conf: $(HOSTAP_DIR)/utils/hostap_crypt_conf
- # Make the dir
- -rm -rf $(HOSTAP_TARGET_MODULE_DIR)
- -mkdir -p $(HOSTAP_TARGET_MODULE_DIR)
- # Copy the pcmcia-cs conf file
- -mkdir -p $(TARGET_DIR)/etc/pcmcia
- cp -af $(HOSTAP_DIR)/driver/etc/hostap_cs.conf $(TARGET_DIR)/etc/pcmcia/
- # Copy The Utils
- cp -af $(HOSTAP_DIR)/utils/hostap_crypt_conf $(TARGET_DIR)/usr/bin/
- cp -af $(HOSTAP_DIR)/utils/hostap_diag $(TARGET_DIR)/usr/bin/
- cp -af $(HOSTAP_DIR)/utils/prism2_param $(TARGET_DIR)/usr/bin/
- cp -af $(HOSTAP_DIR)/utils/prism2_srec $(TARGET_DIR)/usr/bin/
- # Copy hostapd
- cp -af $(HOSTAP_DIR)/hostapd/hostapd $(TARGET_DIR)/usr/sbin/
-
-hostap: pcmcia $(TARGET_DIR)//usr/bin/hostap_crypt_conf
-
-hostap-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(HOSTAP_DIR) uninstall
- -$(MAKE) -C $(HOSTAP_DIR) clean
-
-hostap-dirclean:
- rm -rf $(HOSTAP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# hotplug support
-#
-#############################################################
-HOTPLUG_SOURCE=diethotplug-0.4.tar.gz
-HOTPLUG_SITE=http://aleron.dl.sourceforge.net/sourceforge/linux-hotplug
-HOTPLUG_DIR=$(BUILD_DIR)/diethotplug-0.4
-HOTPLUG_PATCH=$(SOURCE_DIR)/hotplug.patch
-
-$(DL_DIR)/$(HOTPLUG_SOURCE):
- $(WGET) -P $(DL_DIR) $(HOTPLUG_SITE)/$(HOTPLUG_SOURCE)
-
-$(HOTPLUG_DIR): $(DL_DIR)/$(HOTPLUG_SOURCE) $(HOTPLUG_PATCH)
- zcat $(DL_DIR)/$(HOTPLUG_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(HOTPLUG_PATCH) | patch -p1 -d $(HOTPLUG_DIR)
-
-$(HOTPLUG_DIR)/hotplug: $(HOTPLUG_DIR)
- $(MAKE) CROSS=$(TARGET_CROSS) DEBUG=false KLIBC=false \
- KERNEL_INCLUDE_DIR=$(STAGING_DIR)/include \
- TARGET_DIR=$(TARGET_DIR) -C $(HOTPLUG_DIR);
- $(STRIP) $(HOTPLUG_DIR)/hotplug;
- touch -c $(HOTPLUG_DIR)/hotplug
-
-$(TARGET_DIR)/sbin/hotplug: $(HOTPLUG_DIR)/hotplug
- cp $(HOTPLUG_DIR)/hotplug $(TARGET_DIR)/sbin/hotplug;
- touch -c $(TARGET_DIR)/sbin/hotplug
-
-hotplug: uclibc $(TARGET_DIR)/sbin/hotplug
-
-hotplug-source: $(DL_DIR)/$(HOTPLUG_SOURCE)
-
-hotplug-clean:
- rm -f $(TARGET_DIR)/sbin/hotplug
- -$(MAKE) -C $(HOTPLUG_DIR) clean
-
-hotplug-dirclean:
- rm -rf $(HOTPLUG_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ipkg-utils for use on the host system
-#
-#############################################################
-
-IPKG_UTILS_VERSION:=1.7
-IPKG_UTILS_SITE:=http://handhelds.org/packages/ipkg-utils/
-IPKG_UTILS_SOURCE:=ipkg-utils-$(IPKG_UTILS_VERSION).tar.gz
-IPKG_UTILS_DIR:=$(TOOL_BUILD_DIR)/ipkg-utils-$(IPKG_UTILS_VERSION)
-
-IPKG_UTILS_PATCHES += ipkg-utils-1.7-ipkg_buildpackage.patch
-IPKG_UTILS_PATCHES += ipkg-utils-1.7-ipkg_build_clean.patch
-
-$(DL_DIR)/$(IPKG_UTILS_SOURCE):
- $(WGET) -P $(DL_DIR) $(IPKG_UTILS_SITE)/$(IPKG_UTILS_SOURCE)
-
-$(IPKG_UTILS_DIR)/.unpacked: $(DL_DIR)/$(IPKG_UTILS_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- mkdir -p $(DL_DIR)
- zcat $(DL_DIR)/$(IPKG_UTILS_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
- cd $(SOURCE_DIR); cat $(IPKG_UTILS_PATCHES) | patch -p1 -d $(IPKG_UTILS_DIR)
- touch $(IPKG_UTILS_DIR)/.unpacked
-
-$(STAGING_DIR)/bin/ipkg-build: $(IPKG_UTILS_DIR)/.unpacked
- mkdir -p $(STAGING_DIR)/bin
- install -m0755 $(IPKG_UTILS_DIR)/ipkg-build* $(STAGING_DIR)/bin
- install -m0755 $(IPKG_UTILS_DIR)/ipkg-make-index $(STAGING_DIR)/bin
- install -m0755 $(IPKG_UTILS_DIR)/ipkg.py $(STAGING_DIR)/bin
-
-ipkg-utils: $(STAGING_DIR)/bin/ipkg-build
-
-ipkg-utils-clean:
- rm -f $(STAGING_DIR)/bin/ipkg*
-
-ipkg-utils-dirclean:
- rm -rf $(IPKG_UTILS_DIR)
-
-
-IPKG_BUILDPACKAGE := PATH=$(TARGET_PATH) ipkg-buildpackage -c -o root -g root
-IPKG_BUILD := PATH=$(TARGET_PATH) ipkg-build -c -o root -g root
-IPKG_MAKE_INDEX := PATH=$(TARGET_PATH) ipkg-make-index
-
+++ /dev/null
-#############################################################
-#
-# iproute2
-#
-#############################################################
-
-IPROUTE2_DIR=$(BUILD_DIR)/iproute2
-IP_IPK_DIR=$(BUILD_DIR)/ip-2.0-ipk
-TC_IPK_DIR=$(BUILD_DIR)/tc-2.0-ipk
-
-#IPROUTE2_SOURCE_URL=ftp://ftp.inr.ac.ru/ip-routing/
-#IPROUTE2_SOURCE=iproute2-2.4.7-now-ss020116-try.tar.gz
-
-#Use the debian source for now, as the .ru site has availability problems
-IPROUTE2_SOURCE_URL=http://ftp.debian.org/debian/pool/main/i/iproute/
-IPROUTE2_SOURCE=iproute_20010824.orig.tar.gz
-IPROUTE2_PATCH:=iproute_20010824-8.diff.gz
-IPROUTE2_PATCH_2:=iproute2-*.patch
-
-
-$(DL_DIR)/$(IPROUTE2_SOURCE):
- $(WGET) -P $(DL_DIR) $(IPROUTE2_SOURCE_URL)$(IPROUTE2_SOURCE)
-
-$(DL_DIR)/$(IPROUTE2_PATCH):
- $(WGET) -P $(DL_DIR) $(IPROUTE2_SOURCE_URL)/$(IPROUTE2_PATCH)
-
-
-iproute2-source: $(DL_DIR)/$(IPROUTE2_SOURCE) #$(DL_DIR)/$(IPROUTE2_PATCH)
-
-$(IPROUTE2_DIR)/.unpacked: $(DL_DIR)/$(IPROUTE2_SOURCE) #$(DL_DIR)/$(IPROUTE2_PATCH)
- rm -rf $(IPROUTE2_DIR).orig $(IPROUTE2_DIR)
- zcat $(DL_DIR)/$(IPROUTE2_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #zcat $(DL_DIR)/$(IPROUTE2_PATCH) | patch -p1 -d $(IPROUTE2_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(IPROUTE2_DIR) $(SOURCE_DIR) $(IPROUTE2_PATCH_2)
- # fun sed hacks.
- $(SED) "s:-O2:${TARGET_CFLAGS}:g" $(IPROUTE2_DIR)/Makefile
-ifeq ($(ARCH),i386)
- @# needed on atleast i386.. however breaks on mipsel
- $(SED) 's:-I\.\./include-glibc::g' $(IPROUTE2_DIR)/Makefile
-endif
- touch $(IPROUTE2_DIR)/.unpacked
-
-$(IPROUTE2_DIR)/.configured: $(IPROUTE2_DIR)/.unpacked
- $(SED) "s,-I/usr/include/db3,," $(IPROUTE2_DIR)/Makefile
- $(SED) "s,^KERNEL_INCLUDE.*,KERNEL_INCLUDE=$(LINUX_DIR)/include," \
- $(IPROUTE2_DIR)/Makefile
- $(SED) "s,^LIBC_INCLUDE.*,LIBC_INCLUDE=$(STAGING_DIR)/include," \
- $(IPROUTE2_DIR)/Makefile
- # For now disable compiling of the misc directory because it seems to fail
- rm -rf $(IPROUTE2_DIR)/misc
- $(SED) "s, misc,," $(IPROUTE2_DIR)/Makefile
- touch $(IPROUTE2_DIR)/.configured
-
-$(IPROUTE2_DIR)/tc/tc: $(IPROUTE2_DIR)/.configured
- $(MAKE) -C $(IPROUTE2_DIR) $(TARGET_CONFIGURE_OPTS) KERNEL_INCLUDE=$(LINUX_DIR)/include
-
-$(TARGET_DIR)/usr/sbin/tc: $(IPROUTE2_DIR)/tc/tc
- @# Make sure our $(TARGET_DIR)/usr/sbin/ exists.
- -mkdir -p $(TARGET_DIR)/usr/sbin/
- @# Copy The tc binary
- cp -af $(IPROUTE2_DIR)/tc/tc $(TARGET_DIR)/usr/sbin/ && \
- $(STRIP) $(TARGET_DIR)/usr/sbin/tc
-
-iproute2: $(TARGET_DIR)/usr/sbin/tc
-
-iproute2-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(IPROUTE2_DIR) uninstall
- -$(MAKE) -C $(IPROUTE2_DIR) clean
-
-iproute2-dirclean:
- rm -rf $(IPROUTE2_DIR) $(IP_IPK_DIR) $(TC_IPK_DIR)
-
-
-iproute2-ipk: $(IPROUTE2_DIR)/tc/tc
- mkdir -p $(IP_IPK_DIR)
- mkdir -p $(TC_IPK_DIR)
- cp -a $(OPENWRT_IPK_DIR)/iproute/ip/CONTROL $(IP_IPK_DIR)/CONTROL
- cp -a $(OPENWRT_IPK_DIR)/iproute/tc/CONTROL $(TC_IPK_DIR)/CONTROL
- mkdir -p $(IP_IPK_DIR)/usr/sbin
- mkdir -p $(TC_IPK_DIR)/usr/sbin
- install -m 755 $(IPROUTE2_DIR)/ip/ip $(IP_IPK_DIR)/usr/sbin/
- install -m 755 $(IPROUTE2_DIR)/tc/tc $(TC_IPK_DIR)/usr/sbin/
- $(STRIP) $(IP_IPK_DIR)/usr/sbin/ip
- $(STRIP) $(TC_IPK_DIR)/usr/sbin/tc
- cd $(BUILD_DIR); $(IPKG_BUILD) $(IP_IPK_DIR)
- cd $(BUILD_DIR); $(IPKG_BUILD) $(TC_IPK_DIR)
+++ /dev/null
-#############################################################
-#
-# iptables
-#
-#############################################################
-IPTABLES_SOURCE_URL=http://www.netfilter.org/files
-IPTABLES_SOURCE=iptables-1.2.11.tar.bz2
-IPTABLES_BUILD_DIR=$(BUILD_DIR)/iptables-1.2.11
-IP6TABLES_IPK=$(BUILD_DIR)/ip6tables_1.2.11-1_mipsel.ipk
-IP6TABLES_IPK_DIR:=$(BUILD_DIR)/ip6tables-1.2.11-ipk
-
-$(DL_DIR)/$(IPTABLES_SOURCE):
- $(WGET) -P $(DL_DIR) $(IPTABLES_SOURCE_URL)/$(IPTABLES_SOURCE)
-
-$(IPTABLES_BUILD_DIR)/.unpacked: $(DL_DIR)/$(IPTABLES_SOURCE)
- bzcat $(DL_DIR)/$(IPTABLES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(IPTABLES_BUILD_DIR)/.unpacked
-
-$(IPTABLES_BUILD_DIR)/.configured: $(IPTABLES_BUILD_DIR)/.unpacked
- # Allow patches. Needed for openwrt for instance.
- $(SOURCE_DIR)/patch-kernel.sh $(IPTABLES_BUILD_DIR) $(SOURCE_DIR) iptables-*.patch
- #
- $(SED) "s;\[ -f /usr/include/netinet/ip6.h \];grep -q '__UCLIBC_HAS_IPV6__ 1' \
- $(BUILD_DIR)/uClibc-0.9.27/include/bits/uClibc_config.h;" $(IPTABLES_BUILD_DIR)/Makefile
- touch $(IPTABLES_BUILD_DIR)/.configured
-
-$(IPTABLES_BUILD_DIR)/iptables: $(IPTABLES_BUILD_DIR)/.configured
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(IPTABLES_BUILD_DIR) \
- KERNEL_DIR=$(LINUX_DIR) PREFIX=/usr \
- CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)"
-
-$(TARGET_DIR)/sbin/iptables: $(IPTABLES_BUILD_DIR)/iptables
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) -C $(IPTABLES_BUILD_DIR) \
- KERNEL_DIR=$(LINUX_DIR) PREFIX=/usr \
- CC=$(TARGET_CC) COPT_FLAGS="$(TARGET_CFLAGS)" \
- DESTDIR=$(TARGET_DIR) install
- $(STRIP) $(TARGET_DIR)/usr/sbin/iptables*
- $(STRIP) $(TARGET_DIR)/usr/sbin/ip6tables*
- $(STRIP) $(TARGET_DIR)/usr/lib/iptables/*.so
- rm -rf $(TARGET_DIR)/usr/man
-
-iptables: $(TARGET_DIR)/sbin/iptables
-
-$(IP6TABLES_IPK):
- mkdir -p $(IP6TABLES_IPK_DIR)/CONTROL
- mkdir -p $(IP6TABLES_IPK_DIR)/usr/lib/iptables
- mkdir -p $(IP6TABLES_IPK_DIR)/usr/sbin
- install -m 644 $(OPENWRT_IPK_DIR)/ip6tables/ip6tables.control $(IP6TABLES_IPK_DIR)/CONTROL/control
- install -m 755 $(IPTABLES_BUILD_DIR)/ip6tables $(IP6TABLES_IPK_DIR)/usr/sbin
- install -m 755 $(IPTABLES_BUILD_DIR)/extensions/libip6t_*.so $(IP6TABLES_IPK_DIR)/usr/lib/iptables/
- $(STRIP) $(IP6TABLES_IPK_DIR)/usr/sbin/ip6tables*
- $(STRIP) $(IP6TABLES_IPK_DIR)/usr/lib/iptables/*.so
- cd $(BUILD_DIR); $(STAGING_DIR)/bin/ipkg-build -c -o root -g root $(IP6TABLES_IPK_DIR)
-
-ip6tables-ipk: iptables $(IP6TABLES_IPK)
-
-iptables-source: $(DL_DIR)/$(IPTABLES_SOURCE)
-
-iptables-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(IPTABLES_BUILD_DIR) uninstall
- -$(MAKE) -C $(IPTABLES_BUILD_DIR) clean
-
-iptables-dirclean:
- rm -rf $(IPTABLES_BUILD_DIR)
-
+++ /dev/null
-#############################################################
-#
-# jffsbbc
-#
-#############################################################
-
-
-JFFSBBC_SOURCE:=bbc-0.54.3.tgz
-JFFSBBC_DIR:=$(BUILD_DIR)/bbc-0.54.3
-JFFSBBC_SITE:=http://www.inf.u-szeged.hu/jffs2
-JFFSBBC_CAT:=zcat
-
-LINUX_DIR:=$(BUILD_DIR)/WRT54GS/release/src/linux/linux
-
-$(DL_DIR)/$(JFFSBBC_SOURCE):
- $(WGET) -P $(DL_DIR) $(JFFSBBC_SITE)/$(JFFSBBC_SOURCE)
-
-jffsbbc-source: $(DL_DIR)/$(JFFSBBC_SOURCE)
-
-$(JFFSBBC_DIR)/.unpacked: $(DL_DIR)/$(JFFSBBC_SOURCE)
- $(JFFSBBC_CAT) $(DL_DIR)/$(JFFSBBC_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(JFFSBBC_DIR)/.unpacked
-
-$(LINUX_DIR)/.bbc-patched: $(LINUX_DIR)/.patched $(JFFSBBC_DIR)/.unpacked
- -(cd $(JFFSBBC_DIR)/src; ./install.jffs2 linux-2.4.25.hpatch $(LINUX_DIR))
- touch $(LINUX_DIR)/.bbc-patched
-
-jffsbbc: $(LINUX_DIR)/.bbc-patched
-
-jffsbbc-clean:
-
-jffsbbc-dirclean:
- rm -rf $(JFFSBBC_DIR)
+++ /dev/null
-#############################################################
-#
-# mtd provides us with mkfs.jffs2, to target JFFS2 filesystems
-#
-#############################################################
-
-MTD_DIR:=$(BUILD_DIR)/mtd-20011217
-MTD_SOURCE=mtd_20011217.orig.tar.gz
-MTD_SITE=http://ftp.debian.org/debian/pool/main/m/mtd
-MKFS_JFFS2=${shell which mkfs.jffs2 || echo $(MTD_DIR)/util/mkfs.jffs2}
-
-$(DL_DIR)/$(MTD_SOURCE):
- $(WGET) -P $(DL_DIR) $(MTD_SITE)/$(MTD_SOURCE)
-
-$(MTD_DIR)/.unpacked: $(DL_DIR)/$(MTD_SOURCE)
- zcat $(DL_DIR)/$(MTD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MTD_DIR)/.unpacked
-
-$(MTD_DIR)/util/mkfs.jffs2: $(MTD_DIR)/.unpacked
- CFLAGS=-I$(LINUX_DIR)/include $(MAKE) LINUXDIR=$(LINUX_DIR) -C $(MTD_DIR)/util
-
-mtd: $(MKFS_JFFS2)
-
-
-#############################################################
-#
-# Build the jffs2 root filesystem image
-#
-#############################################################
-
-jffs2root: mtd
- #-@find $(TARGET_DIR)/lib -type f -name \*.so\* | xargs $(STRIP) 2>/dev/null || true;
- -@find $(TARGET_DIR) -type f -perm +111 | xargs $(STRIP) 2>/dev/null || true;
- @rm -rf $(TARGET_DIR)/usr/man
- @rm -rf $(TARGET_DIR)/usr/info
- $(MKFS_JFFS2) --pad --little-endian --squash -e 0x20000 \
- -D $(SOURCE_DIR)/device_table.txt -d $(TARGET_DIR) \
- -o $(IMAGE)
-
-jffs2root-source: $(DL_DIR)/$(MTD_SOURCE)
-
-jffs2root-clean:
- -$(MAKE) -C $(MTD_DIR) clean
-
-jffs2root-dirclean:
- rm -rf $(MTD_DIR)
-
-
-
+++ /dev/null
-#############################################################
-#
-# jpeg (libraries needed by some apps)
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-JPEG_DIR=$(BUILD_DIR)/jpeg-6b
-JPEG_SITE:=ftp://ftp.uu.net/graphics/jpeg/
-JPEG_SOURCE=jpegsrc.v6b.tar.gz
-JPEG_CAT:=zcat
-
-$(DL_DIR)/$(JPEG_SOURCE):
- $(WGET) -P $(DL_DIR) $(JPEG_SITE)/$(JPEG_SOURCE)
-
-jpeg-source: $(DL_DIR)/$(JPEG_SOURCE)
-
-$(JPEG_DIR)/.unpacked: $(DL_DIR)/$(JPEG_SOURCE)
- $(JPEG_CAT) $(DL_DIR)/$(JPEG_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # The config.guess distributed with the package is not able
- # to handle cross compilation. Use the one from binutils.
- cp $(BINUTILS_DIR)/config.guess $(JPEG_DIR)/
- touch $(JPEG_DIR)/.unpacked
-
-$(JPEG_DIR)/.configured: $(JPEG_DIR)/.unpacked
- (cd $(JPEG_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --enable-shared \
- );
- touch $(JPEG_DIR)/.configured
-
-$(STAGING_DIR)/lib/libjpeg.so.62.0.0: $(JPEG_DIR)/.configured
- $(MAKE) -C $(JPEG_DIR) all
- # Note: This does not install the utilities.
- $(MAKE) -C $(JPEG_DIR) prefix=$(STAGING_DIR) exec_prefix=$(STAGING_DIR) install-headers install-lib
-
-$(TARGET_DIR)/lib/libjpeg.so.62.0.0: $(STAGING_DIR)/lib/libjpeg.so.62.0.0
- cp -dpf $(STAGING_DIR)/lib/libjpeg.so* $(TARGET_DIR)/usr/lib/
- -$(STRIP) $(TARGET_DIR)/usr/lib/libjpeg.so.62.0.0
-
-jpeg: uclibc $(TARGET_DIR)/lib/libjpeg.so.62.0.0
-
-jpeg-clean:
- -$(MAKE) -C $(JPEG_DIR) clean
+++ /dev/null
-#############################################################
-#
-# Setup the kernel headers. I include a generic package of
-# kernel headers here, so you shouldn't need to include your
-# own. Be aware these kernel headers _will_ get blown away
-# by a 'make clean' so don't put anything sacred in here...
-#
-#############################################################
-ifneq ($(filter $(TARGETS),kernel-headers),)
-
-VERSION=2
-PATCHLEVEL=4
-SUBLEVEL=25
-LINUX_SITE:=http://www.uclibc.org/downloads/toolchain
-LINUX_SOURCE:=kernel-headers-2.4.25.tar.bz2
-LINUX_UNPACK_DIR:=$(TOOL_BUILD_DIR)/linux
-
-
-# Uncomment this for 2.6.x kernel header files
-#VERSION=2
-#PATCHLEVEL=6
-#SUBLEVEL=5
-#LINUX_SITE:=http://ep09.pld-linux.org/~mmazur/linux-libc-headers/
-#LINUX_SOURCE:=linux-libc-headers-2.6.5.0.tar.bz2
-#LINUX_UNPACK_DIR:=$(TOOL_BUILD_DIR)/linux-libc-headers-2.6.5.0
-
-
-
-LINUX_DIR:=$(TOOL_BUILD_DIR)/linux
-
-$(DL_DIR)/$(LINUX_SOURCE):
- $(WGET) -P $(DL_DIR) $(LINUX_SITE)/$(LINUX_SOURCE)
-
-$(LINUX_DIR)/.unpacked: $(DL_DIR)/$(LINUX_SOURCE)
- mkdir -p $(TOOL_BUILD_DIR)
- bzcat $(DL_DIR)/$(LINUX_SOURCE) | tar -C $(TOOL_BUILD_DIR) -xvf -
-ifneq ($(LINUX_UNPACK_DIR),$(LINUX_DIR))
- mv $(LINUX_UNPACK_DIR) $(LINUX_DIR)
-endif
- touch $(LINUX_DIR)/.unpacked
-
-$(LINUX_DIR)/.configured: $(LINUX_DIR)/.unpacked
- rm -f $(LINUX_DIR)/include/asm
- @if [ ! -f $(LINUX_DIR)/Makefile ] ; then \
- echo -e "VERSION = $(VERSION)\nPATCHLEVEL = $(PATCHLEVEL)\n" > \
- $(LINUX_DIR)/Makefile; \
- echo -e "SUBLEVEL = $(SUBLEVEL)\nEXTRAVERSION =\n" > \
- $(LINUX_DIR)/Makefile; \
- echo -e "KERNELRELEASE=\$$(VERSION).\$$(PATCHLEVEL).\$$(SUBLEVEL)\$$(EXTRAVERSION)" >> \
- $(LINUX_DIR)/Makefile; \
- fi;
- @if [ "$(ARCH)" = "powerpc" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-ppc$(NOMMU) asm;) \
- elif [ "$(ARCH)" = "mips" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-mips$(NOMMU) asm;) \
- elif [ "$(ARCH)" = "mipsel" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-mips$(NOMMU) asm;) \
- elif [ "$(ARCH)" = "arm" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-arm$(NOMMU) asm; \
- cd asm; \
- if [ ! -L proc ] ; then \
- ln -fs proc-armv proc; \
- ln -fs arch-ebsa285 arch; fi); \
- elif [ "$(ARCH)" = "cris" ];then \
- (cd $(LINUX_DIR)/include; ln -fs asm-cris asm;) \
- else \
- (cd $(LINUX_DIR)/include; ln -fs asm-$(ARCH)$(NOMMU) asm;) \
- fi
- touch $(LINUX_DIR)/include/linux/autoconf.h;
- touch $(LINUX_DIR)/.configured
-
-$(LINUX_KERNEL): $(LINUX_DIR)/.configured
-
-kernel-headers: $(LINUX_DIR)/.configured
-
-kernel-headers-source: $(DL_DIR)/$(LINUX_SOURCE)
-
-kernel-headers-clean: clean
- rm -f $(LINUX_KERNEL)
- rm -rf $(LINUX_DIR)
-
-kernel-headers-dirclean:
- rm -rf $(LINUX_DIR)
-
-endif
+++ /dev/null
-kmod-ipt6-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ipt6/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ipt6/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ipt6 ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ipt6_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-ipv6-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ipv6/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ipv6/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ipv6 ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ipv6_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-nfs-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-nfs/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-nfs/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-nfs ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-nfs_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-ppp-async-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ppp-async/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ppp-async/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ppp-async ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ppp-async_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-ppp-mppe-mppc-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-ppp-mppe-mppc_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-sched-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-sched/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-sched/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-sched ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-sched_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-kmod-tun-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/kmod-tun/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/kmod-tun/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/kmod-tun ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/kmod-tun_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-#############################################################
-#
-# less
-#
-#############################################################
-LESS_SOURCE=less-381.tar.gz
-LESS_SITE=http://www.greenwoodsoftware.com/less
-LESS_DIR=$(BUILD_DIR)/less-381
-LESS_BINARY=less
-LESS_TARGET_BINARY=usr/bin/less
-
-$(DL_DIR)/$(LESS_SOURCE):
- $(WGET) -P $(DL_DIR) $(LESS_SITE)/$(LESS_SOURCE)
-
-$(LESS_DIR)/.source: $(DL_DIR)/$(LESS_SOURCE)
- zcat $(DL_DIR)/$(LESS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LESS_DIR)/.source
-
-$(LESS_DIR)/.configured: $(LESS_DIR)/.source
- (cd $(LESS_DIR); \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- );
- touch $(LESS_DIR)/.configured;
-
-$(LESS_DIR)/$(LESS_BINARY): $(LESS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LESS_DIR)
-
-$(TARGET_DIR)/$(LESS_TARGET_BINARY): $(LESS_DIR)/$(LESS_BINARY)
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LESS_DIR) install
- rm -Rf $(TARGET_DIR)/usr/man
-
-less: uclibc $(TARGET_DIR)/$(LESS_TARGET_BINARY)
-
-less-source: $(DL_DIR)/$(LESS_SOURCE)
-
-less-clean:
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LESS_DIR) uninstall
- -$(MAKE) -C $(LESS_DIR) clean
-
-less-dirclean:
- rm -rf $(LESS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# libfloat
-#
-#############################################################
-LIBFLOAT_SOURCE:=libfloat_990616.orig.tar.gz
-LIBFLOAT_PATCH:=libfloat_990616-3.diff.gz
-LIBFLOAT_SITE:=http://ftp.debian.org/debian/pool/main/libf/libfloat
-LIBFLOAT_CAT:=zcat
-LIBFLOAT_DIR:=$(BUILD_DIR)/libfloat
-
-LIBFLOAT_TARGET=
-ifeq ($(strip $(SOFT_FLOAT)),true)
-ifeq ("$(strip $(ARCH))","arm")
-LIBFLOAT_TARGET+=$(STAGING_DIR)/lib/libfloat.so
-endif
-endif
-
-$(DL_DIR)/$(LIBFLOAT_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBFLOAT_SITE)/$(LIBFLOAT_SOURCE)
-
-$(DL_DIR)/$(LIBFLOAT_PATCH):
- $(WGET) -P $(DL_DIR) $(LIBFLOAT_SITE)/$(LIBFLOAT_PATCH)
-
-libfloat-source: $(DL_DIR)/$(LIBFLOAT_SOURCE) $(DL_DIR)/$(LIBFLOAT_PATCH)
-
-$(LIBFLOAT_DIR)/.unpacked: $(DL_DIR)/$(LIBFLOAT_SOURCE) $(DL_DIR)/$(LIBFLOAT_PATCH)
- $(LIBFLOAT_CAT) $(DL_DIR)/$(LIBFLOAT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # Remove the binary files distributed with the the package.
- make -C $(LIBFLOAT_DIR) clean
- $(SOURCE_DIR)/patch-kernel.sh $(LIBFLOAT_DIR) $(DL_DIR) $(LIBFLOAT_PATCH)
- $(SOURCE_DIR)/patch-kernel.sh $(LIBFLOAT_DIR) $(SOURCE_DIR) libfloat.patch
- touch $(LIBFLOAT_DIR)/.unpacked
-
-$(LIBFLOAT_DIR)/libfloat.so.1: $(LIBFLOAT_DIR)/.unpacked $(TARGET_CC)
- $(MAKE) CC=$(TARGET_CC) LD=$(TARGET_CROSS)ld -C $(LIBFLOAT_DIR)
-
-$(STAGING_DIR)/lib/libfloat.so: $(LIBFLOAT_DIR)/libfloat.so.1
- cp -a $(LIBFLOAT_DIR)/libfloat.a $(STAGING_DIR)/lib/libfloat.a
- cp -a $(LIBFLOAT_DIR)/libfloat.so.1 $(STAGING_DIR)/lib/libfloat.so.1
- (cd $(STAGING_DIR)/lib ; ln -sf libfloat.so.1 libfloat.so)
- cp -a $(LIBFLOAT_DIR)/libfloat.a $(TARGET_DIR)/usr/lib/libfloat.a
- cp -a $(LIBFLOAT_DIR)/libfloat.so.1 $(TARGET_DIR)/lib/libfloat.so.1
- $(STRIP) $(TARGET_DIR)/lib/libfloat.so.1 > /dev/null 2>&1
- (cd $(TARGET_DIR)/lib ; ln -sf libfloat.so.1 libfloat.so)
- (cd $(TARGET_DIR)/usr/lib ; ln -sf /lib/libfloat.so libfloat.so)
-
-libfloat: $(STAGING_DIR)/lib/libfloat.so
-
-libfloat-clean:
- -$(MAKE) -C $(LIBFLOAT_DIR) clean
-
-libfloat-dirclean:
- rm -rf $(LIBFLOAT_DIR)
-
+++ /dev/null
-#############################################################
-#
-# libglib1.2
-#
-#############################################################
-LIBGLIB12_SOURCE:=glib-1.2.10.tar.gz
-LIBGLIB12_SITE:=ftp://ftp.gtk.org/pub/gtk/v1.2
-LIBGLIB12_CAT:=zcat
-LIBGLIB12_DIR:=$(BUILD_DIR)/glib-1.2.10
-LIBGLIB12_BINARY:=libglib.a
-LIBGLIB12_PATCH:=$(SOURCE_DIR)/libglib_configure_1.2.10.bz2
-
-
-$(DL_DIR)/$(LIBGLIB12_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBGLIB12_SITE)/$(LIBGLIB12_SOURCE)
-
-libglib12-source: $(DL_DIR)/$(LIBGLIB12_SOURCE)
-
-$(LIBGLIB12_DIR)/.unpacked: $(DL_DIR)/$(LIBGLIB12_SOURCE)
- $(LIBGLIB12_CAT) $(DL_DIR)/$(LIBGLIB12_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- bzcat $(LIBGLIB12_PATCH) | patch -p1 -d $(LIBGLIB12_DIR)
- touch $(LIBGLIB12_DIR)/.unpacked
-
-$(LIBGLIB12_DIR)/.configured: $(LIBGLIB12_DIR)/.unpacked
- (cd $(LIBGLIB12_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --enable-shared \
- );
- touch $(LIBGLIB12_DIR)/.configured
-
-$(LIBGLIB12_DIR)/.libs/$(LIBGLIB12_BINARY): $(LIBGLIB12_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LIBGLIB12_DIR)
-
-$(STAGING_DIR)/lib/$(LIBGLIB12_BINARY): $(LIBGLIB12_DIR)/.libs/$(LIBGLIB12_BINARY)
- $(MAKE) prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/libexec \
- datadir=$(STAGING_DIR)/share \
- sysconfdir=$(STAGING_DIR)/etc \
- sharedstatedir=$(STAGING_DIR)/com \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- includedir=$(STAGING_DIR)/include \
- oldincludedir=$(STAGING_DIR)/include \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- -C $(LIBGLIB12_DIR) install;
-
-$(TARGET_DIR)/lib/$(LIBGLIB12_BINARY): $(STAGING_DIR)/lib/$(LIBGLIB12_BINARY)
- cp -a $(STAGING_DIR)/lib/$(LIBGLIB12_BINARY) $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libglib.so $(TARGET_DIR)/lib/
- cp -a $(STAGING_DIR)/lib/libglib-1.2.so.0 $(TARGET_DIR)/lib/
- $(STRIP) $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
-
-libglib12: uclibc $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
-
-libglib12-clean:
- rm -f $(TARGET_DIR)/lib/$(LIBGLIB12_BINARY)
- -$(MAKE) -C $(LIBGLIB12_DIR) clean
-
-libglib12-dirclean:
- rm -rf $(LIBGLIB12_DIR)
-
+++ /dev/null
-#############################################################
-#
-# libmad
-#
-#############################################################
-
-LIBMAD_VERSION=0.15.0b
-
-# Don't alter below this line unless you (think) you know
-# what you are doing! Danger, Danger!
-
-LIBMAD_SOURCE=libmad-$(LIBMAD_VERSION).tar.gz
-LIBMAD_SITE=http://easynews.dl.sourceforge.net/sourceforge/mad/
-LIBMAD_DIR=$(BUILD_DIR)/${shell basename $(LIBMAD_SOURCE) .tar.gz}
-LIBMAD_WORKDIR=$(BUILD_DIR)/libmad-$(LIBMAD_VERSION)
-
-$(DL_DIR)/$(LIBMAD_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBMAD_SITE)/$(LIBMAD_SOURCE)
-
-$(LIBMAD_DIR)/.unpacked: $(DL_DIR)/$(LIBMAD_SOURCE)
- gzip -d -c $(DL_DIR)/$(LIBMAD_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LIBMAD_DIR)/.unpacked
-
-$(LIBMAD_DIR)/.configured: $(LIBMAD_DIR)/.unpacked
- (cd $(LIBMAD_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- $(DISABLE_NLS) \
- );
- touch $(LIBMAD_DIR)/.configured
-
-$(LIBMAD_WORKDIR)/libmad: $(LIBMAD_DIR)/.configured
- rm -f $@
- $(MAKE) CC=$(TARGET_CC) -C $(LIBMAD_WORKDIR)
-
-$(LIBMAD_WORKDIR)/.installed: $(LIBMAD_WORKDIR)/libmad
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LIBMAD_WORKDIR) install
- touch $(LIBMAD_WORKDIR)/.installed
-
-libmad: uclibc $(LIBMAD_WORKDIR)/.installed
-
-libmad-source: $(DL_DIR)/$(LIBMAD_SOURCE)
-
-libmad-clean:
- @if [ -d $(LIBMAD_WORKDIR)/Makefile ] ; then \
- $(MAKE) -C $(LIBMAD_WORKDIR) clean ; \
- fi;
-
-libmad-dirclean:
- rm -rf $(LIBMAD_DIR) $(LIBMAD_WORKDIR)
-
+++ /dev/null
-## libpcap
-
-LIBPCAP_VERSION:=0.8.3
-LIBPCAP_RELEASE:=1
-
-LIBPCAP_SOURCE:=libpcap-$(LIBPCAP_VERSION).tar.gz
-LIBPCAP_SITE:=http://www.tcpdump.org/release/
-LIBPCAP_DIR:=$(BUILD_DIR)/libpcap-$(LIBPCAP_VERSION)
-LIBPCAP_CAT:=zcat
-
-LIBPCAP_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/libpcap
-
-LIBPCAP_BUILD_DIR := $(BUILD_DIR)/libpcap_$(LIBPCAP_VERSION)-$(LIBPCAP_RELEASE)
-LIBPCAP_IPK_DIR := $(OPENWRT_IPK_DIR)/libpcap
-LIBPCAP_IPK := $(LIBPCAP_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(LIBPCAP_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBPCAP_SITE)/$(LIBPCAP_SOURCE)
-
-
-$(LIBPCAP_DIR)/.stamp-unpacked: $(DL_DIR)/$(LIBPCAP_SOURCE)
- $(LIBPCAP_CAT) $(DL_DIR)/$(LIBPCAP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(LIBPCAP_DIR)/.stamp-unpacked
-
-
-$(LIBPCAP_DIR)/.stamp-patched: $(LIBPCAP_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(LIBPCAP_DIR) $(LIBPCAP_PATCH_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(LIBPCAP_DIR) $(LIBPCAP_DIR)/debian/patches *patch
-
- touch $(LIBPCAP_DIR)/.stamp-patched
-
-
-$(LIBPCAP_DIR)/.stamp-configured: $(LIBPCAP_DIR)/.stamp-patched
- cd $(LIBPCAP_DIR) ; \
- rm -rf config.cache ; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ac_cv_linux_vers="2" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib/locate \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var/lib \
- --mandir=/usr/share/man \
- --infodir=/usr/share/info \
- --includedir=/usr/include \
- --libdir=/usr/lib \
- $(DISABLE_NLS) \
- --enable-shared \
- --disable-static \
- --with-pcap=linux \
-
- touch $(LIBPCAP_DIR)/.stamp-configured
-
-
-$(LIBPCAP_DIR)/.stamp-built: $(LIBPCAP_DIR)/.stamp-configured
- cd $(LIBPCAP_DIR) ; \
- $(MAKE) \
- CC=$(TARGET_CC) \
- CCOPT="$(TARGET_OPTIMIZATION)" \
-
- touch $(LIBPCAP_DIR)/.stamp-built
-
-
-$(LIBPCAP_DIR)/.stamp-installed: $(LIBPCAP_DIR)/.stamp-built
- mkdir -p $(LIBPCAP_BUILD_DIR)
- cd $(LIBPCAP_DIR) ; \
- $(MAKE) \
- DESTDIR="$(LIBPCAP_BUILD_DIR)" \
- install \
-
- install -m0644 $(LIBPCAP_BUILD_DIR)/usr/include/pcap*.h $(STAGING_DIR)/include/
- install -m0644 $(LIBPCAP_BUILD_DIR)/usr/lib/libpcap.a $(STAGING_DIR)/lib/
- install -m0755 $(LIBPCAP_BUILD_DIR)/usr/lib/libpcap.so* $(STAGING_DIR)/lib/
-
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/share
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/include
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/lib/*.a
- rm -rf $(LIBPCAP_BUILD_DIR)/usr/lib/*.so
-
- $(STRIP) $(LIBPCAP_BUILD_DIR)/usr/lib/libpcap.so.*
-
- touch $(LIBPCAP_DIR)/.stamp-installed
-
-
-$(LIBPCAP_IPK): $(LIBPCAP_DIR)/.stamp-installed
- cp -a $(LIBPCAP_IPK_DIR)/CONTROL $(LIBPCAP_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(LIBPCAP_VERSION)-$(LIBPCAP_RELEASE)/" $(LIBPCAP_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(LIBPCAP_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(LIBPCAP_BUILD_DIR)
-
-
-libpcap-source: $(DL_DIR)/$(LIBPCAP_SOURCE)
-
-libpcap-ipk: ipkg-utils $(LIBPCAP_IPK)
-
-libpcap-clean:
- $(MAKE) -C $(LIBPCAP_DIR) clean
-
-libpcap-clean-all:
- rm -rf $(LIBPCAP_DIR)
- rm -rf $(LIBPCAP_BUILD_DIR)
- rm -rf $(LIBPCAP_IPK)
- rm -rf $(STAGING_DIR)/include/pcap*.h
- rm -rf $(STAGING_DIR)/lib/libpcap.a
- rm -rf $(STAGING_DIR)/lib/libpcap.so*
+++ /dev/null
-libpthread-ipk: ipkg-utils $(OPENWRT_IPK_DIR)/libpthread/CONTROL/*
- chmod a+x $(OPENWRT_IPK_DIR)/libpthread/CONTROL/rules
- cd $(OPENWRT_IPK_DIR)/libpthread ; $(IPKG_BUILDPACKAGE)
- mv $(OPENWRT_IPK_DIR)/libpthread_*.ipk $(BUILD_DIR)
\ No newline at end of file
+++ /dev/null
-#############################################################
-#
-# libtool
-#
-#############################################################
-LIBTOOL_SOURCE:=libtool_1.4.3.orig.tar.gz
-LIBTOOL_SITE:=http://ftp.debian.org/debian/pool/main/libt/libtool
-LIBTOOL_CAT:=zcat
-LIBTOOL_DIR:=$(BUILD_DIR)/libtool-1.4.3
-LIBTOOL_BINARY:=libtool
-LIBTOOL_TARGET_BINARY:=usr/bin/libtool
-
-$(DL_DIR)/$(LIBTOOL_SOURCE):
- $(WGET) -P $(DL_DIR) $(LIBTOOL_SITE)/$(LIBTOOL_SOURCE)
-
-libtool-source: $(DL_DIR)/$(LIBTOOL_SOURCE)
-
-$(LIBTOOL_DIR)/.unpacked: $(DL_DIR)/$(LIBTOOL_SOURCE)
- $(LIBTOOL_CAT) $(DL_DIR)/$(LIBTOOL_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LIBTOOL_DIR)/.unpacked
-
-$(LIBTOOL_DIR)/.configured: $(LIBTOOL_DIR)/.unpacked
- (cd $(LIBTOOL_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(LIBTOOL_DIR)/.configured
-
-$(LIBTOOL_DIR)/$(LIBTOOL_BINARY): $(LIBTOOL_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LIBTOOL_DIR)
- touch -c $(LIBTOOL_DIR)/$(LIBTOOL_BINARY)
-
-$(TARGET_DIR)/$(LIBTOOL_TARGET_BINARY): $(LIBTOOL_DIR)/$(LIBTOOL_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(LIBTOOL_DIR) install;
- $(STRIP) $(TARGET_DIR)//usr/lib/libltdl.so.*.*.* > /dev/null 2>&1
- $(SED) "s,^CC.*,CC=\"/usr/bin/gcc\"," $(TARGET_DIR)/usr/bin/libtool
- $(SED) "s,^LD.*,LD=\"/usr/bin/ld\"," $(TARGET_DIR)/usr/bin/libtool
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-libtool: uclibc $(TARGET_DIR)/$(LIBTOOL_TARGET_BINARY)
-
-libtool-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(LIBTOOL_DIR) uninstall
- -$(MAKE) -C $(LIBTOOL_DIR) clean
-
-libtool-dirclean:
- rm -rf $(LIBTOOL_DIR)
-
+++ /dev/null
-#############################################################
-#
-# links (text based web browser)
-#
-#############################################################
-LINKS_SITE:=http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/links/download/no-ssl
-LINKS_SOURCE:=links-0.99pre9-no-ssl.tar.gz
-LINKS_DIR:=$(BUILD_DIR)/links-0.99pre9-no-ssl
-
-$(DL_DIR)/$(LINKS_SOURCE):
- $(WGET) -P $(DL_DIR) $(LINKS_SITE)/$(LINKS_SOURCE)
-
-links-source: $(DL_DIR)/$(LINKS_SOURCE)
-
-$(LINKS_DIR)/.unpacked: $(DL_DIR)/$(LINKS_SOURCE)
- zcat $(DL_DIR)/$(LINKS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LINKS_DIR)/.unpacked
-
-$(LINKS_DIR)/.configured: $(LINKS_DIR)/.unpacked
- (cd $(LINKS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/tmp \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(LINKS_DIR)/.configured
-
-$(LINKS_DIR)/links: $(LINKS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LINKS_DIR)
- $(STRIP) $(LINKS_DIR)/links
-
-$(TARGET_DIR)/usr/bin/links: $(LINKS_DIR)/links
- install -c $(LINKS_DIR)/links $(TARGET_DIR)/usr/bin/links
-
-links-clean:
- $(MAKE) -C $(LINKS_DIR) clean
-
-links-dirclean:
- rm -rf $(LINKS_DIR)
-
-links: uclibc $(TARGET_DIR)/usr/bin/links
-
+++ /dev/null
-#############################################################
-#
-# lrzsz (provides zmodem)
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-LRZSZ_SITE:=http://www.ohse.de/uwe/releases
-LRZSZ_SOURCE:=lrzsz-0.12.20.tar.gz
-LRZSZ_DIR:=$(BUILD_DIR)/lrzsz-0.12.20
-
-$(DL_DIR)/$(LRZSZ_SOURCE):
- $(WGET) -P $(DL_DIR) $(LRZSZ_SITE)/$(LRZSZ_SOURCE)
-
-lrzsz-source: $(DL_DIR)/$(LRZSZ_SOURCE)
-
-$(LRZSZ_DIR)/.unpacked: $(DL_DIR)/$(LRZSZ_SOURCE)
- zcat $(DL_DIR)/$(LRZSZ_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LRZSZ_DIR)/.unpacked
-
-$(LRZSZ_DIR)/.configured: $(LRZSZ_DIR)/.unpacked
- (cd $(LRZSZ_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/tmp \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- --disable-timesync \
- );
- $(SED) "s/-lnsl//;" $(LRZSZ_DIR)/src/Makefile
- $(SED) "s~\(#define ENABLE_SYSLOG.*\)~/* \1 */~;" $(LRZSZ_DIR)/config.h
- touch $(LRZSZ_DIR)/.configured
-
-$(LRZSZ_DIR)/src/lrz: $(LRZSZ_DIR)/.configured
- $(MAKE) CROSS_COMPILE="$(TARGET_CROSS)" prefix="$(TARGET_DIR)" -C $(LRZSZ_DIR)
- $(STRIP) $(LRZSZ_DIR)/src/lrz $(LRZSZ_DIR)/src/lsz
-
-$(TARGET_DIR)/usr/bin/rz: $(LRZSZ_DIR)/src/lrz
- cp $(LRZSZ_DIR)/src/lrz $(TARGET_DIR)/usr/bin/rz
- cp $(LRZSZ_DIR)/src/lsz $(TARGET_DIR)/usr/bin/sz
-
-lrzsz: uclibc $(TARGET_DIR)/usr/bin/rz
-
-lrzsz-clean:
- rm -f $(TARGET_DIR)/usr/bin/rz
- -$(MAKE) -C $(LRZSZ_DIR) clean
-
-lrzsz-dirclean:
- rm -rf $(LRZSZ_DIR)
+++ /dev/null
-#############################################################
-#
-# ltp-testsuite
-#
-#############################################################
-LTP_TESTSUITE_SOURCE:=ltp-full-20040206.tgz
-LTP_TESTSUITE_SITE:=http://aleron.dl.sourceforge.net/sourceforge/ltp
-LTP_TESTSUITE_CAT:=zcat
-LTP_TESTSUITE_DIR:=$(BUILD_DIR)/ltp-full-20040206
-LTP_TESTSUITE_PATCH:=$(SOURCE_DIR)/ltp-testsuite.patch
-
-
-$(DL_DIR)/$(LTP_TESTSUITE_SOURCE):
- $(WGET) -P $(DL_DIR) $(LTP_TESTSUITE_SITE)/$(LTP_TESTSUITE_SOURCE)
-
-ltp-testsuite-source: $(DL_DIR)/$(LTP_TESTSUITE_SOURCE)
-
-$(LTP_TESTSUITE_DIR)/.unpacked: $(DL_DIR)/$(LTP_TESTSUITE_SOURCE)
- $(LTP_TESTSUITE_CAT) $(DL_DIR)/$(LTP_TESTSUITE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(LTP_TESTSUITE_PATCH) | patch -p1 -d $(LTP_TESTSUITE_DIR)
- touch $(LTP_TESTSUITE_DIR)/.unpacked
-
-$(LTP_TESTSUITE_DIR)/ltp-testsuite: $(LTP_TESTSUITE_DIR)/.unpacked
- $(MAKE) $(TARGET_CONFIGURE_OPTS) CROSS_COMPILER=$(TARGET_CROSS) \
- -C $(LTP_TESTSUITE_DIR)
-
-$(TARGET_DIR)/usr/bin/ltp-testsuite: $(LTP_TESTSUITE_DIR)/ltp-testsuite
- $(MAKE) $(TARGET_CONFIGURE_OPTS) CROSS_COMPILER=$(TARGET_CROSS) \
- -C $(LTP_TESTSUITE_DIR) install
-
-ltp-testsuite: uclibc $(TARGET_DIR)/usr/bin/ltp-testsuite
-
-ltp-testsuite-clean:
- $(MAKE) -C $(LTP_TESTSUITE_DIR) clean
-
-ltp-testsuite-dirclean:
- rm -rf $(LTP_TESTSUITE_DIR)
-
-
+++ /dev/null
-#############################################################
-#
-# ltrace
-#
-#############################################################
-LTRACE_SOURCE=ltrace_0.3.31.tar.gz
-LTRACE_SITE=http://ftp.debian.org/debian/pool/main/l/ltrace
-LTRACE_DIR=$(BUILD_DIR)/ltrace-0.3.31
-LTRACE_BINARY=ltrace
-LTRACE_TARGET_BINARY=usr/bin/ltrace
-
-$(DL_DIR)/$(LTRACE_SOURCE):
- $(WGET) -P $(DL_DIR) $(LTRACE_SITE)/$(LTRACE_SOURCE)
-
-$(LTRACE_DIR)/.source: $(DL_DIR)/$(LTRACE_SOURCE)
- zcat $(DL_DIR)/$(LTRACE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(LTRACE_DIR)/.source
-
-$(LTRACE_DIR)/.configured: $(LTRACE_DIR)/.source
- (cd $(LTRACE_DIR); \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --sysconfdir=/etc \
- );
- touch $(LTRACE_DIR)/.configured;
-
-$(LTRACE_DIR)/$(LTRACE_BINARY): $(LTRACE_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(LTRACE_DIR)
-
-$(TARGET_DIR)/$(LTRACE_TARGET_BINARY): $(LTRACE_DIR)/$(LTRACE_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(LTRACE_DIR) install
- rm -Rf $(TARGET_DIR)/usr/man
-
-ltrace: uclibc $(TARGET_DIR)/$(LTRACE_TARGET_BINARY)
-
-ltrace-source: $(DL_DIR)/$(LTRACE_SOURCE)
-
-ltrace-clean:
- $(MAKE) prefix=$(TARGET_DIR)/usr -C $(LTRACE_DIR) uninstall
- -$(MAKE) -C $(LTRACE_DIR) clean
-
-ltrace-dirclean:
- rm -rf $(LTRACE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# lzo
-#
-# Note: this builds only a static library, it does not provide
-# anything to be installed into the target system.
-#
-#############################################################
-LZO_SOURCE:=lzo_1.08.orig.tar.gz
-LZO_SITE:=http://ftp.debian.org/debian/pool/main/l/lzo
-#LZO_SOURCE:=lzo-1.08.tar.bz2
-#LZO_SITE:=http://www.oberhumer.com/opensource/lzo/download
-LZO_DIR:=$(BUILD_DIR)/lzo-1.08
-LZO_CAT:=zcat
-LZO_PATCH:=$(SOURCE_DIR)/lzo-cross-compile.patch
-
-$(DL_DIR)/$(LZO_SOURCE):
- $(WGET) -P $(DL_DIR) $(LZO_SITE)/$(LZO_SOURCE)
-
-lzo-source: $(DL_DIR)/$(LZO_SOURCE)
-
-$(LZO_DIR)/.unpacked: $(DL_DIR)/$(LZO_SOURCE)
- $(LZO_CAT) $(DL_DIR)/$(LZO_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- cat $(LZO_PATCH) | patch -p1 -d $(LZO_DIR)
- touch $(LZO_DIR)/.unpacked
-
-LZO_CONFIG_SHARED:=--disable-shared
-#LZO_CONFIG_SHARED:=--enable-shared
-
-$(LZO_DIR)/.configured: $(LZO_DIR)/.unpacked
- (cd $(LZO_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(LZO_CONFIG_SHARED) \
- );
- touch $(LZO_DIR)/.configured
-
-$(LZO_DIR)/src/liblzo.la: $(LZO_DIR)/.configured
- $(MAKE) -C $(LZO_DIR)
-
-$(STAGING_DIR)/lib/liblzo.a: $(LZO_DIR)/src/liblzo.la
- $(MAKE) CC=$(TARGET_CC) DESTDIR=$(STAGING_DIR) -C $(LZO_DIR) install
-
-lzo: uclibc $(STAGING_DIR)/lib/liblzo.a
-
-lzo-clean:
- $(MAKE) DESTDIR=$(STAGING_DIR) -C $(LZO_DIR) uninstall
- -$(MAKE) -C $(LZO_DIR) clean
-
-lzo-dirclean:
- rm -rf $(LZO_DIR)
-
+++ /dev/null
-#############################################################
-#
-# m4
-#
-#############################################################
-M4_SOURCE:=m4-1.4.tar.gz
-M4_SITE:=ftp://ftp.gnu.org/gnu/m4
-M4_CAT:=zcat
-M4_DIR:=$(BUILD_DIR)/m4-1.4
-M4_BINARY:=m4
-M4_TARGET_BINARY:=usr/bin/m4
-
-$(DL_DIR)/$(M4_SOURCE):
- $(WGET) -P $(DL_DIR) $(M4_SITE)/$(M4_SOURCE)
-
-m4-source: $(DL_DIR)/$(M4_SOURCE)
-
-$(M4_DIR)/.unpacked: $(DL_DIR)/$(M4_SOURCE)
- $(M4_CAT) $(DL_DIR)/$(M4_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(M4_DIR)/.unpacked
-
-$(M4_DIR)/.configured: $(M4_DIR)/.unpacked
- (cd $(M4_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- );
- touch $(M4_DIR)/.configured
-
-$(M4_DIR)/src/$(M4_BINARY): $(M4_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(M4_DIR)
-
-$(TARGET_DIR)/$(M4_TARGET_BINARY): $(M4_DIR)/src/$(M4_BINARY)
- $(MAKE) \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- bindir=$(TARGET_DIR)/usr/bin \
- sbindir=$(TARGET_DIR)/usr/sbin \
- libexecdir=$(TARGET_DIR)/usr/lib \
- datadir=$(TARGET_DIR)/usr/share \
- sysconfdir=$(TARGET_DIR)/etc \
- localstatedir=$(TARGET_DIR)/var \
- libdir=$(TARGET_DIR)/usr/lib \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(TARGET_DIR)/usr/include \
- -C $(M4_DIR) install;
- $(STRIP) $(TARGET_DIR)/$(M4_TARGET_BINARY) > /dev/null 2>&1
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-m4: uclibc $(TARGET_DIR)/$(M4_TARGET_BINARY)
-
-m4-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(M4_DIR) uninstall
- -$(MAKE) -C $(M4_DIR) clean
-
-m4-dirclean:
- rm -rf $(M4_DIR)
-
+++ /dev/null
-#############################################################
-#
-# make
-#
-#############################################################
-GNUMAKE_SOURCE:=make-3.80.tar.bz2
-GNUMAKE_SITE:=ftp://ftp.gnu.org/gnu/make
-GNUMAKE_DIR:=$(BUILD_DIR)/make-3.80
-GNUMAKE_CAT:=bzcat
-GNUMAKE_BINARY:=make
-GNUMAKE_TARGET_BINARY:=usr/bin/make
-
-$(DL_DIR)/$(GNUMAKE_SOURCE):
- $(WGET) -P $(DL_DIR) $(GNUMAKE_SITE)/$(GNUMAKE_SOURCE)
-
-make-source: $(DL_DIR)/$(GNUMAKE_SOURCE)
-
-$(GNUMAKE_DIR)/.unpacked: $(DL_DIR)/$(GNUMAKE_SOURCE)
- $(GNUMAKE_CAT) $(DL_DIR)/$(GNUMAKE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(GNUMAKE_DIR)/.unpacked
-
-$(GNUMAKE_DIR)/.configured: $(GNUMAKE_DIR)/.unpacked
- (cd $(GNUMAKE_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- $(DISABLE_LARGEFILE) \
- );
- touch $(GNUMAKE_DIR)/.configured
-
-$(GNUMAKE_DIR)/$(GNUMAKE_BINARY): $(GNUMAKE_DIR)/.configured
- $(MAKE) -C $(GNUMAKE_DIR)
-
-$(TARGET_DIR)/$(GNUMAKE_TARGET_BINARY): $(GNUMAKE_DIR)/$(GNUMAKE_BINARY)
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUMAKE_DIR) install
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-make: uclibc $(TARGET_DIR)/$(GNUMAKE_TARGET_BINARY)
-
-make-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) -C $(GNUMAKE_DIR) uninstall
- -$(MAKE) -C $(GNUMAKE_DIR) clean
-
-make-dirclean:
- rm -rf $(GNUMAKE_DIR)
-
+++ /dev/null
-## matrixssl
-
-MATRIXSSL_VERSION := 1.2.1
-MATRIXSSL_RELEASE := 1
-
-MATRIXSSL_SOURCE := matrixssl-1-2-1.tar.gz
-#MATRIXSSL_SITE := http://www.matrixssl.org/
-MATRIXSSL_SITE := http://nthill.free.fr/openwrt/sources/
-MATRIXSSL_DIR := $(BUILD_DIR)/matrixssl
-MATRIXSSL_CAT := zcat
-
-MATRIXSSL_PATCH_DIR := $(SOURCE_DIR)/openwrt/patches/matrixssl
-
-MATRIXSSL_BUILD_DIR := $(BUILD_DIR)/libmatrixssl_$(MATRIXSSL_VERSION)-$(MATRIXSSL_RELEASE)
-MATRIXSSL_IPK_DIR := $(OPENWRT_IPK_DIR)/libmatrixssl
-MATRIXSSL_IPK := $(MATRIXSSL_BUILD_DIR)_$(ARCH).ipk
-
-
-$(DL_DIR)/$(MATRIXSSL_SOURCE):
- $(WGET) -P $(DL_DIR) $(MATRIXSSL_SITE)/$(MATRIXSSL_SOURCE)
-
-
-$(MATRIXSSL_DIR)/.stamp-unpacked: $(DL_DIR)/$(MATRIXSSL_SOURCE)
- $(MATRIXSSL_CAT) $(DL_DIR)/$(MATRIXSSL_SOURCE) | tar -C $(BUILD_DIR) -xvf -
-
- touch $(MATRIXSSL_DIR)/.stamp-unpacked
-
-
-$(MATRIXSSL_DIR)/.stamp-patched: $(MATRIXSSL_DIR)/.stamp-unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(MATRIXSSL_DIR) $(MATRIXSSL_PATCH_DIR)
-
- touch $(MATRIXSSL_DIR)/.stamp-patched
-
-
-$(MATRIXSSL_DIR)/.stamp-built: $(MATRIXSSL_DIR)/.stamp-patched
- cd $(MATRIXSSL_DIR) ; \
- $(MAKE) -C src \
- CC=$(TARGET_CC) \
- DFLAGS="$(TARGET_CFLAGS)" \
- STRIP=/bin/true \
- all
-
- touch $(MATRIXSSL_DIR)/.stamp-built
-
-
-$(MATRIXSSL_BUILD_DIR): $(MATRIXSSL_DIR)/.stamp-built
- mkdir -p $(MATRIXSSL_BUILD_DIR)
-
- install -m0755 -d $(STAGING_DIR)/include/matrixSsl
- install -m0644 $(MATRIXSSL_DIR)/matrixSsl.h $(STAGING_DIR)/include/matrixSsl/
- ln -fs matrixSsl/matrixSsl.h $(STAGING_DIR)/include/
- install -m0755 $(MATRIXSSL_DIR)/src/libmatrixssl.so $(STAGING_DIR)/lib/libmatrixssl.so.$(MATRIXSSL_VERSION)
- ln -fs libmatrixssl.so.$(MATRIXSSL_VERSION) $(STAGING_DIR)/lib/libmatrixssl.so.1.2
- ln -fs libmatrixssl.so.1.2 $(STAGING_DIR)/lib/libmatrixssl.so
-
- mkdir -p $(MATRIXSSL_BUILD_DIR)/usr/lib
- cp -a $(STAGING_DIR)/lib/libmatrixssl.so.* $(MATRIXSSL_BUILD_DIR)/usr/lib/
-
- $(STRIP) $(MATRIXSSL_BUILD_DIR)/usr/lib/libmatrixssl.so.*
-
-
-$(MATRIXSSL_IPK): $(MATRIXSSL_BUILD_DIR)
- cp -a $(MATRIXSSL_IPK_DIR)/CONTROL $(MATRIXSSL_BUILD_DIR)/
- perl -pi -e "s/^Vers.*:.*$$/Version: $(MATRIXSSL_VERSION)-$(MATRIXSSL_RELEASE)/" $(MATRIXSSL_BUILD_DIR)/CONTROL/control
- perl -pi -e "s/^Arch.*:.*$$/Architecture: $(ARCH)/" $(MATRIXSSL_BUILD_DIR)/CONTROL/control
- cd $(BUILD_DIR); $(IPKG_BUILD) $(MATRIXSSL_BUILD_DIR)
-
-
-matrixssl-ipk: ipkg-utils libpthread-ipk $(MATRIXSSL_IPK)
-
-matrixssl-clean:
- $(MAKE) -C $(MATRIXSSL_DIR) clean
-
-matrixssl-clean-all:
- rm -rf $(MATRIXSSL_DIR)
- rm -rf $(MATRIXSSL_BUILD_DIR)
- rm -rf $(MATRIXSSL_IPK)
- rm -rf $(STAGING_DIR)/include/pcap*.h
- rm -rf $(STAGING_DIR)/lib/libpcap.a
- rm -rf $(STAGING_DIR)/lib/libpcap.so*
+++ /dev/null
-#############################################################
-#
-# microcom terminal emulator
-#
-# Maintainer: Tim Riker <Tim@Rikers.org>
-#
-#############################################################
-# Copyright (C) 2001-2003 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2002 by Tim Riker <Tim@Rikers.org>
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-# TARGETS
-# http://microcom.port5.com/m102.tar.gz
-MICROCOM_SITE:=http://microcom.port5.com/
-MICROCOM_SOURCE:=m102.tar.gz
-MICROCOM_DIR:=$(BUILD_DIR)/microcom-1.02
-
-$(DL_DIR)/$(MICROCOM_SOURCE):
- $(WGET) -P $(DL_DIR) $(MICROCOM_SITE)/$(MICROCOM_SOURCE)
-
-microcom-source: $(DL_DIR)/$(MICROCOM_SOURCE)
-
-$(MICROCOM_DIR)/.unpacked: $(DL_DIR)/$(MICROCOM_SOURCE)
- mkdir -p $(MICROCOM_DIR)
- zcat $(DL_DIR)/$(MICROCOM_SOURCE) | tar -C $(MICROCOM_DIR) -xvf -
- touch $(MICROCOM_DIR)/.unpacked
-
-$(MICROCOM_DIR)/.configured: $(MICROCOM_DIR)/.unpacked
- $(SED) 's~gcc~${TARGET_CC}~' $(MICROCOM_DIR)/Makefile
- touch $(MICROCOM_DIR)/.configured
-
-$(MICROCOM_DIR)/microcom: $(MICROCOM_DIR)/.configured
- $(MAKE) -C $(MICROCOM_DIR)
-
-$(TARGET_DIR)/usr/bin/microcom: $(MICROCOM_DIR)/microcom
- install -c $(MICROCOM_DIR)/microcom $(TARGET_DIR)/usr/bin/microcom
-
-microcom-clean:
- rm $(MICROCOM_DIR)/*.o
-
-microcom-dirclean:
- rm -rf $(MICROCOM_DIR)
-
-microcom: uclibc $(TARGET_DIR)/usr/bin/microcom
-
+++ /dev/null
-#############################################################
-#
-# Microwindows - 2003/11/17 Greg Haerr
-# (requires CVS 2003/11/17 or later)
-#
-#############################################################
-MICROWIN_SITE:=ftp://ftp.microwindows.org/pub/microwindows
-MICROWIN_SOURCE:=microwindows-src-snapshot.tar.gz
-MICROWIN_DIR:=$(BUILD_DIR)/microwin
-#MICROWIN_SOURCE:=microwindows-0.91.tar.gz
-#MICROWIN_DIR:=$(BUILD_DIR)/microwindows-0.91
-
-MICROWIN_CAT:=zcat
-MICROWIN_BINARY:=$(MICROWIN_DIR)/src/bin/nano-X
-MICROWIN_TARGET_BINARY:=$(TARGET_DIR)/usr/bin/nano-X
-
-MICROWIN_CONFIG:=$(MICROWIN_DIR)/src/Configs/config.uclibc
-
-$(DL_DIR)/$(MICROWIN_SOURCE):
- $(WGET) -P $(DL_DIR) $(MICROWIN_SITE)/$(MICROWIN_SOURCE)
-
-microwin-source: $(DL_DIR)/$(MICROWIN_SOURCE)
-
-$(MICROWIN_DIR)/.unpacked: $(DL_DIR)/$(MICROWIN_SOURCE)
- $(MICROWIN_CAT) $(DL_DIR)/$(MICROWIN_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MICROWIN_DIR)/.unpacked
-
-$(MICROWIN_DIR)/.configured: $(MICROWIN_DIR)/.unpacked
- (cd $(MICROWIN_DIR); \
- );
- touch $(MICROWIN_DIR)/.configured
-
-$(MICROWIN_BINARY): $(MICROWIN_DIR)/.configured
- $(MAKE) ARCH=LINUX-$(shell echo $(ARCH) | tr a-z A-Z) $(shell echo $(ARCH) | tr a-z A-Z)TOOLSPREFIX=$(TARGET_CROSS) CC=$(TARGET_CC) -C $(MICROWIN_DIR)/src CONFIG=$(MICROWIN_CONFIG)
-
-$(MICROWIN_TARGET_BINARY): $(MICROWIN_BINARY)
- $(MAKE) INSTALL_PREFIX=$(TARGET_DIR)/usr INSTALL_OWNER1= INSTALL_OWNER2= CC=$(TARGET_CC) -C $(MICROWIN_DIR)/src CONFIG=$(MICROWIN_CONFIG) install
-
-microwin: uclibc $(MICROWIN_TARGET_BINARY)
-
-microwin-clean:
- -$(MAKE) -C $(MICROWIN_DIR)/src clean
-
-microwin-dirclean:
- rm -rf $(MICROWIN_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mkdosfs
-#
-#############################################################
-MKDOSFS_SOURCE=dosfstools-2.8.src.tar.gz
-MKDOSFS_SITE=http://ftp.uni-erlangen.de/pub/Linux/LOCAL/dosfstools
-MKDOSFS_DIR=$(BUILD_DIR)/dosfstools-2.8
-MKDOSFS_CAT:=zcat
-MKDOSFS_BINARY:=mkdosfs/mkdosfs
-MKDOSFS_TARGET_BINARY:=sbin/mkdosfs
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-MKDOSFS_CFLAGS="-Os -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64"
-else
-MKDOSFS_CFLAGS="-Os -g"
-endif
-
-$(DL_DIR)/$(MKDOSFS_SOURCE):
- $(WGET) -P $(DL_DIR) $(MKDOSFS_SITE)/$(MKDOSFS_SOURCE)
-
-mkdosfs-source: $(DL_DIR)/$(MKDOSFS_SOURCE)
-
-$(MKDOSFS_DIR)/.unpacked: $(DL_DIR)/$(MKDOSFS_SOURCE)
- $(MKDOSFS_CAT) $(DL_DIR)/$(MKDOSFS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MKDOSFS_DIR)/.unpacked
-
-$(MKDOSFS_DIR)/$(MKDOSFS_BINARY): $(MKDOSFS_DIR)/.unpacked
- $(MAKE) CFLAGS=$(MKDOSFS_CFLAGS) CC=$(TARGET_CC) -C $(MKDOSFS_DIR);
- $(STRIP) $(MKDOSFS_DIR)/mkdosfs/mkdosfs;
- touch -c $(MKDOSFS_DIR)/mkdosfs/mkdosfs
-
-$(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY): $(MKDOSFS_DIR)/$(MKDOSFS_BINARY)
- cp -a $(MKDOSFS_DIR)/$(MKDOSFS_BINARY) $(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY)
- touch -c $(TARGET_DIR)/sbin/mkdosfs
-
-mkdosfs: uclibc $(TARGET_DIR)/$(MKDOSFS_TARGET_BINARY)
-
-mkdosfs-clean:
- $(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(MKDOSFS_DIR) uninstall
- -$(MAKE) -C $(MKDOSFS_DIR) clean
-
-mkdosfs-dirclean:
- rm -rf $(MKDOSFS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mke2fs
-#
-#############################################################
-MKE2FS_SOURCE=e2fsprogs-1.27.tar.gz
-MKE2FS_SITE=http://aleron.dl.sourceforge.net/sourceforge/e2fsprogs
-MKE2FS_DIR=$(BUILD_DIR)/e2fsprogs-1.27
-MKE2FS_CAT:=zcat
-MKE2FS_BINARY:=misc/mke2fs
-MKE2FS_TARGET_BINARY:=sbin/mke2fs
-
-$(DL_DIR)/$(MKE2FS_SOURCE):
- $(WGET) -P $(DL_DIR) $(MKE2FS_SITE)/$(MKE2FS_SOURCE)
-
-mke2fs-source: $(DL_DIR)/$(MKE2FS_SOURCE)
-
-$(MKE2FS_DIR)/.unpacked: $(DL_DIR)/$(MKE2FS_SOURCE)
- $(MKE2FS_CAT) $(DL_DIR)/$(MKE2FS_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(MKE2FS_DIR)/.unpacked
-
-$(MKE2FS_DIR)/.configured: $(MKE2FS_DIR)/.unpacked
- (cd $(MKE2FS_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --with-cc=$(TARGET_CC) \
- --with-linker=$(TARGET_CROSS)ld \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --disable-elf-shlibs --disable-swapfs \
- --disable-debugfs --disable-imager \
- --disable-resizer --disable-fsck \
- --without-catgets $(DISABLE_NLS) \
- );
- touch $(MKE2FS_DIR)/.configured
-
-$(MKE2FS_DIR)/$(MKE2FS_BINARY): $(MKE2FS_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(MKE2FS_DIR)
- $(STRIP) $(MKE2FS_DIR)/misc/mke2fs $(MKE2FS_DIR)/misc/badblocks;
- touch -c $(MKE2FS_DIR)/misc/mke2fs
-
-$(TARGET_DIR)/$(MKE2FS_TARGET_BINARY): $(MKE2FS_DIR)/$(MKE2FS_BINARY)
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(MKE2FS_DIR) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Only install a few selected items...
- cp -dpf $(MKE2FS_DIR)/misc/mke2fs $(TARGET_DIR)/sbin/mke2fs;
- cp -dpf $(MKE2FS_DIR)/misc/badblocks $(TARGET_DIR)/sbin/badblocks;
- touch -c $(TARGET_DIR)/sbin/mke2fs
-
-mke2fs: uclibc $(TARGET_DIR)/$(MKE2FS_TARGET_BINARY)
-
-mke2fs-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(MKE2FS_DIR) uninstall
- rm -f $(TARGET_DIR)/sbin/mke2fs $(TARGET_DIR)/sbin/badblocks;
- -$(MAKE) -C $(MKE2FS_DIR) clean
-
-mke2fs-dirclean:
- rm -rf $(MKE2FS_DIR)
-
+++ /dev/null
-#############################################################
-#
-# mrouted
-#
-#
-#############################################################
-MROUTED_SOURCE:=mrouted_3.9-beta3.orig.tar.gz
-MROUTED_SITE:=http://ftp.debian.org/debian/pool/non-free/m/mrouted
-MROUTED_DIR:=$(BUILD_DIR)/mrouted-3.9-beta3.orig
-MROUTED_CAT:=zcat
-#MROUTED_PATCH:=$(SOURCE_DIR)/mrouted_3.9-beta3-1.1.diff
-MROUTED_PATCH:=mrouted_3.9-beta3-1.1.diff.gz
-MROUTED_BINARY:=mrouted
-MROUTED_TARGET_BINARY:=usr/sbin/mrouted
-
-$(DL_DIR)/$(MROUTED_SOURCE):
- $(WGET) -P $(DL_DIR) $(MROUTED_SITE)/$(MROUTED_SOURCE)
-
-$(DL_DIR)/$(MROUTED_PATCH):
- $(WGET) -P $(DL_DIR) $(MROUTED_SITE)/$(MROUTED_PATCH)
-
-mrouted-source: $(DL_DIR)/$(MROUTED_SOURCE) $(DL_DIR)/$(MROUTED_PATCH)
-
-$(MROUTED_DIR)/.unpacked: mrouted-source
- $(MROUTED_CAT) $(DL_DIR)/$(MROUTED_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(MROUTED_CAT) $(DL_DIR)/$(MROUTED_PATCH) | patch -p1 -d $(MROUTED_DIR)
- $(SOURCE_DIR)/patch-kernel.sh $(MROUTED_DIR) $(SOURCE_DIR) mrouted-*.patch
- touch $(MROUTED_DIR)/.unpacked
-
-$(MROUTED_DIR)/$(MROUTED_BINARY): $(MROUTED_DIR)/.unpacked
- $(TARGET_CONFIGURE_OPTS) \
- $(MAKE) CC=$(TARGET_CC) -C $(MROUTED_DIR)
-
-$(TARGET_DIR)/$(MROUTED_TARGET_BINARY): $(MROUTED_DIR)/$(MROUTED_BINARY)
- cp -a $(MROUTED_DIR)/$(MROUTED_BINARY) $(TARGET_DIR)/$(MROUTED_TARGET_BINARY)
-
-mrouted: uclibc $(TARGET_DIR)/$(MROUTED_TARGET_BINARY)
-
-mrouted-clean:
- rm -f $(TARGET_DIR)/$(MROUTED_TARGET_BINARY)
- -$(MAKE) -C $(MROUTED_DIR) clean
-
-mrouted-dirclean:
- rm -rf $(MROUTED_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ncurses
-# this installs only a few vital termcap entries
-#
-#############################################################
-# Copyright (C) 2002 by Ken Restivo <ken@246gt.com>
-# $Id$
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU Library General Public License as
-# published by the Free Software Foundation; either version 2 of the
-# License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# Library General Public License for more details.
-#
-# You should have received a copy of the GNU Library General Public
-# License along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
-# USA
-
-# TARGETS
-NCURSES_SITE:=ftp://ftp.gnu.org/pub/gnu/ncurses
-NCURSES_DIR:=$(BUILD_DIR)/ncurses-5.2
-NCURSES_SOURCE:=ncurses-5.2.tar.gz
-
-$(DL_DIR)/$(NCURSES_SOURCE):
- $(WGET) -P $(DL_DIR) $(NCURSES_SITE)/$(NCURSES_SOURCE)
-
-$(NCURSES_DIR)/.dist: $(DL_DIR)/$(NCURSES_SOURCE)
- gunzip -c $(DL_DIR)/$(NCURSES_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #use the local tic and not whatever the build system was going to find.
- $(SED) 's~\$$srcdir/shlib tic\$$suffix~/usr/bin/tic~' \
- $(NCURSES_DIR)/misc/run_tic.in
- touch $(NCURSES_DIR)/.dist
-
-$(NCURSES_DIR)/.configured: $(NCURSES_DIR)/.dist
- (cd $(NCURSES_DIR); rm -rf config.cache; \
- BUILD_CC=$(TARGET_CC) HOSTCC=$(HOSTCC) \
- $(TARGET_CONFIGURE_OPTS) \
- CFLAGS="$(TARGET_CFLAGS)" \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- --with-terminfo-dirs=/usr/share/terminfo \
- --with-default-terminfo-dir=/usr/share/terminfo \
- --libdir=$(STAGING_DIR)/lib \
- --with-shared --without-cxx --without-cxx-binding \
- --without-ada --without-progs $(DISABLE_NLS) \
- --without-profile --without-debug --disable-rpath \
- --enable-echo --enable-const --enable-overwrite \
- );
- touch $(NCURSES_DIR)/.configured
-
-$(NCURSES_DIR)/lib/libncurses.so.5.2: $(NCURSES_DIR)/.configured
- $(MAKE) BUILD_CC=$(TARGET_CC) HOSTCC=$(HOSTCC) \
- BUILD_CCFLAGS="-I$(NCURSES_DIR) -I$(NCURSES_DIR)/include" \
- BUILD_LDFLAGS="" DESTDIR=$(STAGING_DIR) -C $(NCURSES_DIR) \
- libs panel menu form headers
-
-$(STAGING_DIR)/lib/libncurses.a: $(NCURSES_DIR)/lib/libncurses.so.5.2
- BUILD_CC=$(TARGET_CC) HOSTCC=$(HOSTCC) CC=$(TARGET_CC) \
- $(MAKE) \
- prefix=$(STAGING_DIR) \
- exec_prefix=$(STAGING_DIR) \
- bindir=$(STAGING_DIR)/bin \
- sbindir=$(STAGING_DIR)/sbin \
- libexecdir=$(STAGING_DIR)/lib \
- datadir=$(STAGING_DIR)/usr/share \
- sysconfdir=$(STAGING_DIR)/etc \
- localstatedir=$(STAGING_DIR)/var \
- libdir=$(STAGING_DIR)/lib \
- infodir=$(STAGING_DIR)/info \
- mandir=$(STAGING_DIR)/man \
- includedir=$(STAGING_DIR)/include \
- gxx_include_dir=$(STAGING_DIR)/include/c++ \
- ticdir=$(STAGING_DIR)/usr/share/terminfo \
- -C $(NCURSES_DIR) install;
- chmod a-x $(NCURSES_DIR)/lib/libncurses.so*
- touch -c $(STAGING_DIR)/lib/libncurses.a
-
-$(TARGET_DIR)/lib/libncurses.so.5.2: $(STAGING_DIR)/lib/libncurses.a
- cp -dpf $(NCURSES_DIR)/lib/libncurses.so* $(TARGET_DIR)/lib/
- -cp -dpf $(STAGING_DIR)/usr/lib/terminfo $(TARGET_DIR)/usr/lib/
- mkdir -p $(TARGET_DIR)/usr/share/terminfo
- for i in x/xterm x/xterm-color x/xterm-xfree86 v/vt100 v/vt200 a/ansi l/linux; do \
- cp -dpf $(STAGING_DIR)/usr/share/terminfo/$${i} $(TARGET_DIR)/usr/share/terminfo/; \
- done
-
-$(TARGET_DIR)/usr/lib/libncurses.a: $(STAGING_DIR)/lib/libncurses.a
- cp -dpf $(NCURSES_DIR)/include/curses.h $(TARGET_DIR)/usr/include/ncurses.h
- cp -dpf $(NCURSES_DIR)/include/term.h $(TARGET_DIR)/usr/include/
- cp -dpf $(NCURSES_DIR)/include/unctrl.h $(TARGET_DIR)/usr/include/
- cp -dpf $(NCURSES_DIR)/include/termcap.h $(TARGET_DIR)/usr/include/
- cp -dpf $(NCURSES_DIR)/lib/libncurses.a $(TARGET_DIR)/usr/lib/
- rm -f $(TARGET_DIR)/usr/lib/terminfo
- (cd $(TARGET_DIR)/usr/lib; ln -fs /usr/share/terminfo)
- (cd $(TARGET_DIR)/usr/lib; ln -fs libncurses.a libcurses.a)
- (cd $(TARGET_DIR)/usr/lib; ln -fs libncurses.a libtermcap.a)
- (cd $(TARGET_DIR)/usr/include; ln -fs ncurses.h curses.h)
- rm -f $(TARGET_DIR)/lib/libncurses.so
- (cd $(TARGET_DIR)/usr/lib; ln -fs /lib/libncurses.so.5.2 libncurses.so)
- -$(STRIP) $(TARGET_DIR)/lib/libncurses.so.5.2
- touch -c $(TARGET_DIR)/usr/lib/libncurses.a
-
-ncurses-headers: $(TARGET_DIR)/usr/lib/libncurses.a
-
-ncurses-source: $(DL_DIR)/$(NCURSES_SOURCE)
-
-ncurses-clean:
- rm -f $(STAGING_DIR)/lib/libncurses.so* $(TARGET_DIR)/lib/libncurses.so*
- rm -f $(STAGING_DIR)/usr/share/tabset $(TARGET_DIR)/usr/share/tabset
- rm -rf $(STAGING_DIR)/usr/share/terminfo $(TARGET_DIR)/usr/share/terminfo
- -$(MAKE) -C $(NCURSES_DIR) clean
-
-ncurses-dirclean:
- rm -rf $(NCURSES_DIR)
-
-ncurses: $(TARGET_DIR)/lib/libncurses.so.5.2
-
+++ /dev/null
-#############################################################
-#
-# netfilter
-#
-#############################################################
-
-ifeq ($(strip $(USE_NETFILTER_SNAPSHOT)),)
-USE_NETFILTER_SNAPSHOT=20040508
-endif
-NETFILTER_SOURCE:=patch-o-matic-$(USE_NETFILTER_SNAPSHOT).tar.bz2
-NETFILTER_DIR:=$(BUILD_DIR)/patch-o-matic-$(USE_NETFILTER_SNAPSHOT)
-NETFILTER_SITE:=ftp://ftp.netfilter.org/pub/patch-o-matic/snapshot
-NETFILTER_CAT:=bzcat
-
-# ipv6_mld breaks net/ipv6/mcast.c
-NETFILTER_EXCLUDE:=--exclude submitted/89_ipv6_mld_netfilter.patch
-
-NETFILTER_PATCHES:= \
- base \
- extra/CLASSIFY.patch \
- extra/CONNMARK.patch \
- extra/IPMARK.patch \
- extra/condition.patch \
- extra/h323-conntrack-nat.patch \
- extra/mms-conntrack-nat.patch \
- extra/pptp-conntrack-nat.patch \
- extra/string.patch
-
-LINUX_DIR:=$(BUILD_DIR)/WRT54GS/release/src/linux/linux
-
-$(DL_DIR)/$(NETFILTER_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETFILTER_SITE)/$(NETFILTER_SOURCE)
-
-netfilter-source: $(DL_DIR)/$(NETFILTER_SOURCE)
-
-$(NETFILTER_DIR)/.unpacked: $(DL_DIR)/$(NETFILTER_SOURCE)
- $(NETFILTER_CAT) $(DL_DIR)/$(NETFILTER_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- #ignore whitespace in patches
- $(SED) "s,\-p1,\-l \-p1," $(NETFILTER_DIR)/runme
- touch $(NETFILTER_DIR)/.unpacked
-
-$(LINUX_DIR)/.nf-patched: $(LINUX_DIR)/.unpacked $(NETFILTER_DIR)/.unpacked
- $(SOURCE_DIR)/patch-kernel.sh $(LINUX_DIR) $(SOURCE_DIR)/openwrt/kernel/netfilter/patches
- -(cd $(NETFILTER_DIR); KERNEL_DIR=$(LINUX_DIR) ./runme --batch $(NETFILTER_EXCLUDE) $(NETFILTER_PATCHES))
- touch $(LINUX_DIR)/.nf-patched
-
-netfilter: $(LINUX_DIR)/.nf-patched
-
-netfilter-clean:
-
-netfilter-dirclean:
- rm -rf $(NETFILTER_DIR)
+++ /dev/null
-#############################################################
-#
-# netkitbase
-#
-#############################################################
-NETKITBASE_SOURCE:=netkit-base-0.17.tar.gz
-NETKITBASE_SITE:=ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/
-NETKITBASE_DIR:=$(BUILD_DIR)/netkit-base-0.17
-NETKITBASE_CAT:=zcat
-NETKITBASE_BINARY:=inetd/inetd
-NETKITBASE_TARGET_BINARY:=usr/sbin/inetd
-
-$(DL_DIR)/$(NETKITBASE_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETKITBASE_SITE)/$(NETKITBASE_SOURCE)
-
-netkitbase-source: $(DL_DIR)/$(NETKITBASE_SOURCE)
-
-$(NETKITBASE_DIR)/.unpacked: $(DL_DIR)/$(NETKITBASE_SOURCE)
- $(NETKITBASE_CAT) $(DL_DIR)/$(NETKITBASE_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # use ANSI syntax
- $(SED) "s/main()/main(void)/;" $(NETKITBASE_DIR)/configure
- # don't try to run cross compiled binaries while configuring things
- $(SED) "s~./__conftest~#./__conftest~;" $(NETKITBASE_DIR)/configure
- touch $(NETKITBASE_DIR)/.unpacked
-
-$(NETKITBASE_DIR)/.configured: $(NETKITBASE_DIR)/.unpacked
- (cd $(NETKITBASE_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
- ./configure --installroot=$(TARGET_DIR) --with-c-compiler=$(TARGET_CC) \
- )
- touch $(NETKITBASE_DIR)/.configured
-
-$(NETKITBASE_DIR)/$(NETKITBASE_BINARY): $(NETKITBASE_DIR)/.configured
- $(MAKE) CC=$(TARGET_CC) -C $(NETKITBASE_DIR)
- $(STRIP) $(NETKITBASE_DIR)/$(NETKITBASE_BINARY)
-
-$(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY): $(NETKITBASE_DIR)/$(NETKITBASE_BINARY)
- # Only install a few selected items...
- mkdir -p $(TARGET_DIR)/usr/sbin
- cp $(NETKITBASE_DIR)/$(NETKITBASE_BINARY) $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY)
- mkdir -p $(TARGET_DIR)/etc
- cp $(NETKITBASE_DIR)/etc.sample/inetd.conf $(TARGET_DIR)/etc/
- $(SED) "s/^\([a-z]\)/#\1/;" $(TARGET_DIR)/etc/inetd.conf
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITBASE_DIR) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-netkitbase: uclibc $(TARGET_DIR)/$(NETKITBASE_TARGET_BINARY)
-
-netkitbase-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITBASE_DIR) uninstall
- -rm -f $(TARGET_DIR)/usr/sbin/inetd $(TARGET_DIR)/etc/inetd.conf
- -rm -f $(TARGET_DIR)/etc/inetd.conf
- -$(MAKE) -C $(NETKITBASE_DIR) clean
-
-netkitbase-dirclean:
- rm -rf $(NETKITBASE_DIR)
-
+++ /dev/null
-#############################################################
-#
-# netkittelnet
-#
-#############################################################
-NETKITTELNET_SOURCE:=netkit-telnet-0.17.tar.gz
-NETKITTELNET_SITE:=ftp://ftp.uk.linux.org/pub/linux/Networking/netkit/
-NETKITTELNET_DIR:=$(BUILD_DIR)/netkit-telnet-0.17
-NETKITTELNET_CAT:=zcat
-NETKITTELNET_BINARY:=telnetd/telnetd
-NETKITTELNET_TARGET_BINARY:=usr/sbin/telnetd
-NETKITTELNET_PATCH:=$(SOURCE_DIR)/netkittelnet.patch
-
-$(DL_DIR)/$(NETKITTELNET_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETKITTELNET_SITE)/$(NETKITTELNET_SOURCE)
-
-netkittelnet-source: $(DL_DIR)/$(NETKITTELNET_SOURCE)
-
-$(NETKITTELNET_DIR)/.unpacked: $(DL_DIR)/$(NETKITTELNET_SOURCE)
- $(NETKITTELNET_CAT) $(DL_DIR)/$(NETKITTELNET_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- # use ANSI syntax
- $(SED) "s/main()/main(void)/;" $(NETKITTELNET_DIR)/configure
- # Disable termcap support
- $(SED) "s~\(.*termcap\.h.*\)~/* \1 */~;" $(NETKITTELNET_DIR)/telnetd/telnetd.c
- # don't try to run cross compiled binaries while configuring things
- cat $(NETKITTELNET_PATCH) | patch -p1 -d $(NETKITTELNET_DIR)
- touch $(NETKITTELNET_DIR)/.unpacked
-
-$(NETKITTELNET_DIR)/.configured: $(NETKITTELNET_DIR)/.unpacked
- (cd $(NETKITTELNET_DIR); PATH=$(TARGET_PATH) CC=$(TARGET_CC) \
- ./configure --installroot=$(TARGET_DIR) --with-c-compiler=$(TARGET_CC) \
- )
- touch $(NETKITTELNET_DIR)/.configured
-
-$(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY): $(NETKITTELNET_DIR)/.configured
- $(MAKE) SUB=telnetd CC=$(TARGET_CC) -C $(NETKITTELNET_DIR)
- $(STRIP) $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY)
-
-$(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY): $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY)
- # Only install a few selected items...
- mkdir -p $(TARGET_DIR)/usr/sbin
- rm -f $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY)
- cp $(NETKITTELNET_DIR)/$(NETKITTELNET_BINARY) $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY)
- # Enable telnet in inetd
- $(SED) "s~^#telnet.*~telnet\tstream\ttcp\tnowait\troot\t/usr/sbin/telnetd\t/usr/sbin/telnetd~;" $(TARGET_DIR)/etc/inetd.conf
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITTELNET_DIR) install
- #rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- # $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
-
-netkittelnet: uclibc netkitbase $(TARGET_DIR)/$(NETKITTELNET_TARGET_BINARY)
-
-netkittelnet-clean:
- #$(MAKE) DESTDIR=$(TARGET_DIR) CC=$(TARGET_CC) -C $(NETKITTELNET_DIR) uninstall
- -rm -f $(TARGET_DIR)/usr/sbin/telnetd
- -$(MAKE) -C $(NETKITTELNET_DIR) clean
-
-netkittelnet-dirclean:
- rm -rf $(NETKITTELNET_DIR)
-
+++ /dev/null
-#############################################################
-#
-# netsnmp
-#
-#############################################################
-
-NETSNMP_URL:=http://aleron.dl.sourceforge.net/sourceforge/net-snmp/
-NETSNMP_DIR:=$(BUILD_DIR)/net-snmp-5.1
-NETSNMP_SOURCE:=net-snmp-5.1.tar.gz
-NETSNMP_PATCH1:=net-snmp_5.1-5.diff.gz
-NETSNMP_PATCH1_URL:=http://ftp.debian.org/debian/pool/main/n/net-snmp/
-NETSNMP_PATCH2:=$(SOURCE_DIR)/netsnmp.patch
-
-$(DL_DIR)/$(NETSNMP_SOURCE):
- $(WGET) -P $(DL_DIR) $(NETSNMP_URL)/$(NETSNMP_SOURCE)
-
-$(DL_DIR)/$(NETSNMP_PATCH1):
- $(WGET) -P $(DL_DIR) $(NETSNMP_PATCH1_URL)/$(NETSNMP_PATCH1)
-
-$(NETSNMP_DIR)/.unpacked: $(DL_DIR)/$(NETSNMP_SOURCE) $(DL_DIR)/$(NETSNMP_PATCH1)
- zcat $(DL_DIR)/$(NETSNMP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- zcat $(DL_DIR)/$(NETSNMP_PATCH1) | patch -p1 -d $(NETSNMP_DIR)
- cat $(NETSNMP_PATCH2) | patch -p1 -d $(NETSNMP_DIR)
- touch $(NETSNMP_DIR)/.unpacked
-
-# We set CAN_USE_SYSCTL to no and use /proc since the
-# sysctl code in this thing is apparently intended for
-# freebsd or some such thing...
-$(NETSNMP_DIR)/.configured: $(NETSNMP_DIR)/.unpacked
- (cd $(NETSNMP_DIR); autoconf; \
- ac_cv_CAN_USE_SYSCTL=no \
- PATH=$(TARGET_PATH) \
- ./configure \
- --with-cc=$(TARGET_CROSS)gcc \
- --with-ar=$(TARGET_CROSS)ar \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --with-endianness=little \
- --with-persistent-directory=/var/lib/snmp \
- --enable-ucd-snmp-compatibility \
- --enable-shared \
- --disable-static \
- --with-logfile=none \
- --without-rpm \
- --with-openssl \
- --without-dmalloc \
- --without-efence \
- --without-rsaref \
- --with-sys-contact="root" \
- --with-sys-location="Unknown" \
- --with-mib-modules="host smux ucd-snmp/dlmod" \
- --with-defaults \
- --prefix=/usr \
- --sysconfdir=/etc \
- --mandir=/usr/man \
- --infodir=/usr/info \
- );
- touch $(NETSNMP_DIR)/.configured
-
-$(NETSNMP_DIR)/agent/snmpd: $(NETSNMP_DIR)/.configured
- $(MAKE) -C $(NETSNMP_DIR)
-
-$(TARGET_DIR)/usr/sbin/snmpd: $(NETSNMP_DIR)/agent/snmpd
- #$(MAKE) DESTDIR=$(TARGET_DIR) -C $(NETSNMP_DIR) install
- $(MAKE) PREFIX=$(TARGET_DIR)/usr \
- prefix=$(TARGET_DIR)/usr \
- exec_prefix=$(TARGET_DIR)/usr \
- persistentdir=$(TARGET_DIR)/var/lib/snmp \
- infodir=$(TARGET_DIR)/usr/info \
- mandir=$(TARGET_DIR)/usr/man \
- includedir=$(STAGING_DIR)/include/net-snmp \
- ucdincludedir=$(STAGING_DIR)/include/ucd-snmp \
- -C $(NETSNMP_DIR) install;
- rm -rf $(TARGET_DIR)/share/locale $(TARGET_DIR)/usr/info \
- $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/doc
- # Copy the .conf files.
- mkdir -p $(TARGET_DIR)/etc/snmp
- cp $(NETSNMP_DIR)/EXAMPLE.conf $(TARGET_DIR)/etc/snmp/snmpd.conf
- cp $(NETSNMP_DIR)/EXAMPLE-trap.conf $(TARGET_DIR)/etc/snmp/snmptrapd.conf
- -mv $(TARGET_DIR)/usr/share/snmp/mib2c*.conf $(TARGET_DIR)/etc/snmp
- mkdir -p $(TARGET_DIR)/etc/default
- cp $(NETSNMP_DIR)/debian/snmpd.default $(TARGET_DIR)/etc/default/snmpd
- # Remove the unsupported snmpcheck program
- rm $(TARGET_DIR)/usr/bin/snmpcheck
- # Install the "broken" headers
- cp $(NETSNMP_DIR)/agent/mibgroup/struct.h $(STAGING_DIR)/include/net-snmp/agent
- cp $(NETSNMP_DIR)/agent/mibgroup/util_funcs.h $(STAGING_DIR)/include/net-snmp
- cp $(NETSNMP_DIR)/agent/mibgroup/mibincl.h $(STAGING_DIR)/include/net-snmp/library
- cp $(NETSNMP_DIR)/agent/mibgroup/header_complex.h $(STAGING_DIR)/include/net-snmp/agent
-
-netsnmp: $(TARGET_DIR)/usr/sbin/snmpd
-
-netsnmp-headers: $(TARGET_DIR)/usr/include/net-snmp/net-snmp-config.h
- cp -a $(STAGING_DIR)/include/net-snmp $(TARGET_DIR)/usr/include/net-snmp
- cp -a $(STAGING_DIR)/include/ucd-snmp $(TARGET_DIR)/usr/include/net-snmp
-
-netsnmp-source: $(DL_DIR)/$(NETSNMP_SOURCE)
-
-netsnmp-clean:
- $(MAKE) -C $(NETSNMP_DIR) clean
-
-netsnmp-dirclean:
- rm -rf $(NETSNMP_DIR)
-
+++ /dev/null
-#############################################################
-#
-# newt
-#
-#############################################################
-NEWT_SOURCE=newt-0.51.0.tar.bz2
-NEWT_SITE=http://www.uclibc.org/
-NEWT_DIR=$(BUILD_DIR)/newt-0.51.0
-NEWT_VERSION=0.51.0
-ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true)
-NEWT_CFLAGS=-Os -g -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
-else
-NEWT_CFLAGS=-Os -g
-endif
-NEWT_CFLAGS+=-fPIC
-
-$(DL_DIR)/$(NEWT_SOURCE):
- $(WGET) -P $(DL_DIR) $(NEWT_SITE)/$(NEWT_SOURCE)
-
-$(NEWT_DIR)/.source: $(DL_DIR)/$(NEWT_SOURCE)
- bzcat $(DL_DIR)/$(NEWT_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- touch $(NEWT_DIR)/.source;
-
-$(NEWT_DIR)/.configured: $(NEWT_DIR)/.source
- (cd $(NEWT_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
- --sysconfdir=/etc \
- --datadir=/usr/share \
- --localstatedir=/var \
- --mandir=/usr/man \
- --infodir=/usr/info \
- $(DISABLE_NLS) \
- );
- touch $(NEWT_DIR)/.configured;
-
-$(NEWT_DIR)/libnewt.so.$(NEWT_VERSION): $(NEWT_DIR)/.configured
- $(MAKE) CFLAGS="$(NEWT_CFLAGS)" CC=$(TARGET_CC) -C $(NEWT_DIR)
- touch -c $(NEWT_DIR)/libnewt.so.$(NEWT_VERSION)
-
-$(STAGING_DIR)/lib/libnewt.a: $(NEWT_DIR)/libnewt.so.$(NEWT_VERSION)
- cp -a $(NEWT_DIR)/libnewt.a $(STAGING_DIR)/lib;
- cp -a $(NEWT_DIR)/newt.h $(STAGING_DIR)/include;
- cp -a $(NEWT_DIR)/libnewt.so* $(STAGING_DIR)/lib;
- (cd $(STAGING_DIR)/lib; ln -fs libnewt.so.$(NEWT_VERSION) libnewt.so);
- (cd $(STAGING_DIR)/lib; ln -fs libnewt.so.$(NEWT_VERSION) libnewt.so.0.51);
- touch -c $(STAGING_DIR)/lib/libnewt.a
-
-$(TARGET_DIR)/lib/libnewt.so.$(NEWT_VERSION): $(STAGING_DIR)/lib/libnewt.a
- cp -a $(STAGING_DIR)/lib/libnewt.so* $(TARGET_DIR)/lib;
- -$(STRIP) $(TARGET_DIR)/lib/libnewt.so*
- touch -c $(TARGET_DIR)/lib/libnewt.so.$(NEWT_VERSION)
-
-newt: uclibc slang $(TARGET_DIR)/lib/libnewt.so.$(NEWT_VERSION)
-
-newt-source: $(DL_DIR)/$(NEWT_SOURCE)
-
-newt-clean:
- rm -f $(TARGET_DIR)/lib/libnewt.so*
- -$(MAKE) -C $(NEWT_DIR) clean
-
-newt-dirclean: slang-dirclean
- rm -rf $(NEWT_DIR)
-
+++ /dev/null
-#############################################################
-#
-# ntp
-#
-#############################################################
-NTP_SOURCE:=ntp-4.1.2.tar.gz
-NTP_SITE:=http://www.eecis.udel.edu/~ntp/ntp_spool/ntp4
-NTP_DIR:=$(BUILD_DIR)/ntp-4.1.2
-NTP_CAT:=zcat
-NTP_BINARY:=ntpdate/ntpdate
-NTP_TARGET_BINARY:=usr/bin/ntpdate
-
-
-$(DL_DIR)/$(NTP_SOURCE):
- $(WGET) -P $(DL_DIR) $(NTP_SITE)/$(NTP_SOURCE)
-
-ntp-source: $(DL_DIR)/$(NTP_SOURCE)
-
-$(NTP_DIR)/.unpacked: $(DL_DIR)/$(NTP_SOURCE)
- $(NTP_CAT) $(DL_DIR)/$(NTP_SOURCE) | tar -C $(BUILD_DIR) -xvf -
- $(SED) "s,^#if.*__GLIBC__.*_BSD_SOURCE.*$$,#if 0," \
- $(NTP_DIR)/ntpd/refclock_pcf.c;
- touch $(NTP_DIR)/.unpacked
-
-$(NTP_DIR)/.configured: $(NTP_DIR)/.unpacked
- (cd $(NTP_DIR); rm -rf config.cache; \
- $(TARGET_CONFIGURE_OPTS) \
- ./configure \
- --target=$(GNU_TARGET_NAME) \
- --host=$(GNU_TARGET_NAME) \
- --build=$(GNU_HOST_NAME) \
- --prefix=/usr \
- --exec-prefix=/usr \
- --bindir=/usr/bin \
- --sbindir=/usr/sbin \
- --libexecdir=/usr/lib \
-
projects / openwrt / svn-archive / archive.git / commitdiff