ar71xx: Added support for D-link DHP-1565 rev. A1
authorJohn Crispin <john@openwrt.org>
Wed, 19 Nov 2014 09:20:47 +0000 (09:20 +0000)
committerJohn Crispin <john@openwrt.org>
Wed, 19 Nov 2014 09:20:47 +0000 (09:20 +0000)
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>
SVN-Revision: 43307

target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
target/linux/ar71xx/base-files/etc/uci-defaults/02_network
target/linux/ar71xx/base-files/etc/uci-defaults/04_led_migration
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-3.10
target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c [new file with mode: 0644]
target/linux/ar71xx/generic/profiles/d-link.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch [new file with mode: 0644]

index 8f9a1e6eb8597bf64a00c00c99a999c3b9bd13d3..39a54cb796b544d7014cf63fe0ab5b3a5ebb3a0a 100755 (executable)
@@ -46,6 +46,7 @@ get_status_led() {
        db120)
                status_led="db120:green:status"
                ;;
+       dhp-1565-a1|\
        dir-505-a1 |\
        dir-600-a1 |\
        dir-615-e1 |\
index 7255970622ae3a25dc0a61537a777b8cafc70079..2678e5510aef60262066a4c53c197ebe03a15349 100755 (executable)
@@ -98,6 +98,10 @@ rb-2011uias-2hnd)
        ucidef_set_led_switch "eth10" "ETH10" "rb:green:eth10" "switch1" "0x02"
        ;;
 
+dhp-1565-a1)
+       ucidef_set_led_switch "wan" "WAN" "d-link:green:planet" "switch0" "0x20"
+       ;;
+
 dir-505-a1)
        ucidef_set_led_netdev "lan" "LAN" "d-link:green:power" "eth1"
        ;;
index 5fde7b2b460c67a9b99e4c84775ca70481207825..1b0bea0ef8277c11cd7fba939b68af14cabbd8ce 100755 (executable)
@@ -260,6 +260,7 @@ mynet-n750)
        [ -n "$mac" ] && ucidef_set_interface_macaddr "wan" "$mac"
        ;;
 
+dhp-1565-a1 |\
 dir-835-a1 |\
 wndr3700v4 | \
 wndr4300)
index 0df94a01c047730532f38a5018ca27becad8821d..1cef8b993772a36d2df7dd4d69a6c94a7f82c8ca 100755 (executable)
@@ -46,6 +46,7 @@ migrate_leds()
 board=$(ar71xx_board_name)
 
 case "$board" in
+dhp-1565-a1|\
 dir-825-c1|\
 dir-835-a1)
        migrate_leds ":orange:=:amber:" ":wifi_bgn=:wlan2g"
index 0f226185221c7588dd0f58ac1ec11a94099e98b8..30163fb21bb633f5152566c82316603b69c79110 100755 (executable)
@@ -305,6 +305,9 @@ ar71xx_board_detect() {
        *"DB120 reference board")
                name="db120"
                ;;
+       *"DHP-1565 rev. A1")
+               name="dhp-1565-a1"
+               ;;
        *"DIR-505 rev. A1")
                name="dir-505-a1"
                ;;
index 0ad49a36a4662608c854a301c5694e65857fb762..1db72d8c4a192282e0de58a142e5abc205711fc0 100755 (executable)
@@ -167,6 +167,7 @@ platform_check_image() {
        ap81 | \
        ap83 | \
        ap132 | \
+       dhp-1565-a1 |\
        dir-505-a1 | \
        dir-600-a1 | \
        dir-615-c1 | \
index 30ee592b22d318a3d7f382bcde75f76af891f219..02628ab17e0af41378434e18c65812ff998eed61 100644 (file)
@@ -40,6 +40,7 @@ CONFIG_ATH79_MACH_BHU_BXU2000N2_A=y
 CONFIG_ATH79_MACH_CAP4200AG=y
 CONFIG_ATH79_MACH_CARAMBOLA2=y
 CONFIG_ATH79_MACH_DB120=y
+CONFIG_ATH79_MACH_DHP_1565_A1=y
 CONFIG_ATH79_MACH_DIR_505_A1=y
 CONFIG_ATH79_MACH_DIR_600_A1=y
 CONFIG_ATH79_MACH_DIR_615_C1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dhp-1565-a1.c
new file mode 100644 (file)
index 0000000..ae47764
--- /dev/null
@@ -0,0 +1,170 @@
+/*
+ *  D-Link DHP-1565 rev. A1 board support
+ *
+ *  Copyright (C) 2014 Jacek Kikiewicz
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/phy.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/ar8216_platform.h>
+
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define DHP1565A1_GPIO_LED_BLUE_USB            11
+#define DHP1565A1_GPIO_LED_AMBER_POWER         14
+#define DHP1565A1_GPIO_LED_BLUE_POWER          22
+#define DHP1565A1_GPIO_LED_BLUE_WPS            15
+#define DHP1565A1_GPIO_LED_AMBER_PLANET                19
+#define DHP1565A1_GPIO_LED_BLUE_PLANET         18
+#define DHP1565A1_GPIO_LED_WLAN_2G             13
+
+#define DHP1565A1_GPIO_WAN_LED_ENABLE          20
+
+#define DHP1565A1_GPIO_BTN_RESET                       17
+#define DHP1565A1_GPIO_BTN_WPS                 16
+
+#define DHP1565A1_KEYS_POLL_INTERVAL           20      /* msecs */
+#define DHP1565A1_KEYS_DEBOUNCE_INTERVAL               (3 * DHP1565A1_KEYS_POLL_INTERVAL)
+
+#define DHP1565A1_MAC0_OFFSET                  0xFFA0
+#define DHP1565A1_MAC1_OFFSET                  0xFFB4
+#define DHP1565A1_WMAC0_OFFSET                 0x5
+#define DHP1565A1_WMAC_CALDATA_OFFSET          0x1000
+#define DHP1565A1_PCIE_CALDATA_OFFSET          0x5000
+
+static struct gpio_led dhp1565a1_leds_gpio[] __initdata = {
+       {
+               .name           = "d-link:amber:power",
+               .gpio           = DHP1565A1_GPIO_LED_AMBER_POWER,
+               .active_low     = 1,
+       },
+       {
+               .name           = "d-link:green:power",
+               .gpio           = DHP1565A1_GPIO_LED_BLUE_POWER,
+               .active_low     = 1,
+       },
+       {
+               .name           = "d-link:amber:planet",
+               .gpio           = DHP1565A1_GPIO_LED_AMBER_PLANET,
+               .active_low     = 1,
+       },
+       {
+               .name           = "d-link:green:planet",
+               .gpio           = DHP1565A1_GPIO_LED_BLUE_PLANET,
+               .active_low     = 1,
+       },
+};
+
+static struct gpio_keys_button dhp1565a1_gpio_keys[] __initdata = {
+       {
+               .desc           = "Soft reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DHP1565A1_GPIO_BTN_RESET,
+               .active_low     = 1,
+       },
+       {
+               .desc           = "WPS button",
+               .type           = EV_KEY,
+               .code           = KEY_WPS_BUTTON,
+               .debounce_interval = DHP1565A1_KEYS_DEBOUNCE_INTERVAL,
+               .gpio           = DHP1565A1_GPIO_BTN_WPS,
+               .active_low     = 1,
+       },
+};
+
+static struct ar8327_pad_cfg dhp1565a1_ar8327_pad0_cfg = {
+       .mode = AR8327_PAD_MAC_RGMII,
+       .txclk_delay_en = true,
+       .rxclk_delay_en = true,
+       .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
+       .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
+};
+
+static struct ar8327_platform_data dhp1565a1_ar8327_data = {
+       .pad0_cfg = &dhp1565a1_ar8327_pad0_cfg,
+       .port0_cfg = {
+               .force_link = 1,
+               .speed = AR8327_PORT_SPEED_1000,
+               .duplex = 1,
+               .txpause = 1,
+               .rxpause = 1,
+       },
+};
+
+static struct mdio_board_info dhp1565a1_mdio0_info[] = {
+       {
+               .bus_id = "ag71xx-mdio.0",
+               .phy_addr = 0,
+               .platform_data = &dhp1565a1_ar8327_data,
+       },
+};
+
+static void __init dhp1565a1_generic_setup(void)
+{
+       u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000);
+       u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+       u8 mac0[ETH_ALEN], mac1[ETH_ALEN];
+       u8 wmac0[ETH_ALEN];
+
+       ath79_parse_ascii_mac(mac + DHP1565A1_MAC0_OFFSET, mac0);
+       ath79_parse_ascii_mac(mac + DHP1565A1_MAC1_OFFSET, mac1);
+
+       ath79_register_m25p80(NULL);
+
+       ath79_register_gpio_keys_polled(-1, DHP1565A1_KEYS_POLL_INTERVAL,
+                                       ARRAY_SIZE(dhp1565a1_gpio_keys),
+                                       dhp1565a1_gpio_keys);
+
+       ath79_init_mac(wmac0, mac0, 0);
+       ath79_register_wmac(art + DHP1565A1_WMAC_CALDATA_OFFSET, wmac0);
+
+       ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0);
+
+       mdiobus_register_board_info(dhp1565a1_mdio0_info,
+                                   ARRAY_SIZE(dhp1565a1_mdio0_info));
+
+       ath79_register_mdio(0, 0x0);
+
+       ath79_init_mac(ath79_eth0_data.mac_addr, mac0, 1);
+
+       /* GMAC0 is connected to an AR8327N switch */
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ath79_eth0_data.phy_mask = BIT(0);
+       ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
+       ath79_eth0_pll_data.pll_1000 = 0x06000000;
+       ath79_register_eth(0);
+
+       ath79_register_usb();
+}
+
+static void __init dhp1565a1_setup(void)
+{
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(dhp1565a1_leds_gpio),
+                                dhp1565a1_leds_gpio);
+
+       dhp1565a1_generic_setup();
+}
+
+MIPS_MACHINE(ATH79_MACH_DHP_1565_A1, "DHP-1565-A1",
+            "D-Link DHP-1565 rev. A1",
+            dhp1565a1_setup);
index eb721c3503625118fc9016162803cc8fce95a7bf..5079af1ff57fdf08170a78070b0354e06d719da7 100644 (file)
@@ -5,6 +5,17 @@
 # See /LICENSE for more information.
 #
 
+define Profile/DHP1565A1
+       NAME:=D-Link DHP-1565 rev. A1
+       PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/DHP1565A1/Description
+       Package set optimized for the D-Link DHP-1565 rev. A1.
+endef
+
+$(eval $(call Profile,DHP1565A1))
+
 define Profile/DIR505A1
        NAME:=D-Link DIR-505 rev. A1
        PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev
index 749f11f8e698cb3f3fe8f6c2b6cf5abc4998e7b9..af7646c75892e6f522b5cfb53f43e13685e1e354 100644 (file)
@@ -1132,6 +1132,7 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B
 $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA"))
 $(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,""))
 
+$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 $(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 $(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00"))
 
diff --git a/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch b/target/linux/ar71xx/patches-3.10/730-MIPS-ath79-add-DHP-1565A1.patch
new file mode 100644 (file)
index 0000000..6ca0595
--- /dev/null
@@ -0,0 +1,40 @@
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -39,6 +39,7 @@
+       ATH79_MACH_CARAMBOLA2,          /* 8devices Carambola2 */
+       ATH79_MACH_DB120,               /* Atheros DB120 reference board */
+       ATH79_MACH_PB44,                /* Atheros PB44 reference board */
++      ATH79_MACH_DHP_1565_A1,         /* D-Link DHP-1565 rev. A1 */
+       ATH79_MACH_DIR_505_A1,          /* D-Link DIR-505 rev. A1 */
+       ATH79_MACH_DIR_600_A1,          /* D-Link DIR-600 rev. A1 */
+       ATH79_MACH_DIR_615_C1,          /* D-Link DIR-615 rev. C1 */
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -283,6 +283,17 @@
+       select ATH79_DEV_USB
+       select MYLOADER
++config ATH79_MACH_DHP_1565_A1
++      bool "D-Link DHP-1565 rev. A1 board support"
++      select SOC_AR934X
++      select ATH79_DEV_AP9X_PCI if PCI
++      select ATH79_DEV_ETH
++      select ATH79_DEV_GPIO_BUTTONS
++      select ATH79_DEV_LEDS_GPIO
++      select ATH79_DEV_M25P80
++      select ATH79_DEV_USB
++      select ATH79_DEV_WMAC
++
+ config ATH79_MACH_DIR_505_A1
+       bool "D-Link DIR-505-A1 support"
+       select SOC_AR933X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -54,6 +54,7 @@
+ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A)+= mach-bhu-bxu2000n2-a.o
+ obj-$(CONFIG_ATH79_MACH_CAP4200AG)    += mach-cap4200ag.o
+ obj-$(CONFIG_ATH79_MACH_DB120)                += mach-db120.o
++obj-$(CONFIG_ATH79_MACH_DHP_1565_A1)  += mach-dhp-1565-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_505_A1)   += mach-dir-505-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_600_A1)   += mach-dir-600-a1.o
+ obj-$(CONFIG_ATH79_MACH_DIR_615_C1)   += mach-dir-615-c1.o