bcm63xx: add basic bcm6362 support
authorJonas Gorski <jogo@openwrt.org>
Tue, 31 Jul 2012 14:27:42 +0000 (14:27 +0000)
committerJonas Gorski <jogo@openwrt.org>
Tue, 31 Jul 2012 14:27:42 +0000 (14:27 +0000)
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 32923

18 files changed:
target/linux/brcm63xx/config-3.3
target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch
target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch
target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch
target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch
target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
target/linux/brcm63xx/patches-3.3/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
target/linux/brcm63xx/patches-3.3/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
target/linux/brcm63xx/patches-3.3/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch [new file with mode: 0644]
target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch

index 42ffabce91c8724486e7c4957f06f38edfe5e561..c8adb6870dd308a650e982ba047f5b2d0d1731f3 100644 (file)
@@ -11,6 +11,7 @@ CONFIG_BCM63XX_CPU_6338=y
 CONFIG_BCM63XX_CPU_6345=y
 CONFIG_BCM63XX_CPU_6348=y
 CONFIG_BCM63XX_CPU_6358=y
+# CONFIG_BCM63XX_CPU_6362 is not set
 CONFIG_BCM63XX_CPU_6368=y
 CONFIG_BCM63XX_ENET=y
 CONFIG_BCM63XX_PHY=y
diff --git a/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch b/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch
new file mode 100644 (file)
index 0000000..6285929
--- /dev/null
@@ -0,0 +1,497 @@
+From 27ebbb819b1f92d52309276b29b7a56e362e5c4d Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 21 Nov 2011 00:48:52 +0100
+Subject: [PATCH 54/84] MIPS: BCM63XX: add basic BCM6362 support
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/Kconfig                         |    4 +
+ arch/mips/bcm63xx/boards/board_bcm963xx.c         |    2 +-
+ arch/mips/bcm63xx/cpu.c                           |   52 ++++++++-
+ arch/mips/bcm63xx/irq.c                           |   19 +++
+ arch/mips/bcm63xx/prom.c                          |    2 +
+ arch/mips/bcm63xx/setup.c                         |    3 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |  139 +++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |    2 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   59 +++++++++
+ arch/mips/include/asm/mach-bcm63xx/ioremap.h      |    1 +
+ 10 files changed, 281 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -25,6 +25,10 @@ config BCM63XX_CPU_6358
+       bool "support 6358 CPU"
+       select HW_HAS_PCI
++config BCM63XX_CPU_6362
++      bool "support 6362 CPU"
++      select HW_HAS_PCI
++
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+       select HW_HAS_PCI
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -764,7 +764,7 @@ void __init board_prom_init(void)
+       /* read base address of boot chip select (0)
+        * 6328 does not have MPI but boots from a fixed address
+        */
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
+               val = 0x18000000;
+       else {
+               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
+--- a/arch/mips/bcm63xx/cpu.c
++++ b/arch/mips/bcm63xx/cpu.c
+@@ -71,6 +71,15 @@ static const int bcm6358_irqs[] = {
+ };
++static const unsigned long bcm6362_regs_base[] = {
++      __GEN_CPU_REGS_TABLE(6362)
++};
++
++static const int bcm6362_irqs[] = {
++      __GEN_CPU_IRQ_TABLE(6362)
++
++};
++
+ static const unsigned long bcm6368_regs_base[] = {
+       __GEN_CPU_REGS_TABLE(6368)
+ };
+@@ -169,6 +178,42 @@ static unsigned int detect_cpu_clock(voi
+               return (16 * 1000000 * n1 * n2) / m1;
+       }
++      case BCM6362_CPU_ID:
++      {
++              unsigned int tmp, mips_pll_fcvo;
++
++              tmp = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++              mips_pll_fcvo = (tmp & STRAPBUS_6362_FCVO_MASK)
++                              >> STRAPBUS_6362_FCVO_SHIFT;
++              switch (mips_pll_fcvo) {
++              case 0x03:
++              case 0x0b:
++              case 0x13:
++              case 0x1b:
++                      return 240000000;
++              case 0x04:
++              case 0x0c:
++              case 0x14:
++              case 0x1c:
++                      return 160000000;
++              case 0x05:
++              case 0x0e:
++              case 0x16:
++              case 0x1e:
++              case 0x1f:
++                      return 400000000;
++              case 0x06:
++                      return 440000000;
++              case 0x07:
++              case 0x17:
++                      return 384000000;
++              case 0x15:
++              case 0x1d:
++                      return 200000000;
++              default:
++                      return 320000000;
++              }
++      }
+       case BCM6368_CPU_ID:
+       {
+               unsigned int tmp, p1, p2, ndiv, m1;
+@@ -205,7 +250,7 @@ static unsigned int detect_memory_size(v
+       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
+       u32 val;
+-      if (BCMCPU_IS_6328())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
+               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
+       if (BCMCPU_IS_6345()) {
+@@ -280,6 +325,11 @@ void __init bcm63xx_cpu_init(void)
+                               bcm63xx_regs_base = bcm6328_regs_base;
+                               bcm63xx_irqs = bcm6328_irqs;
+                               break;
++                      case BCM6362_CPU_ID:
++                              expected_cpu_id = BCM6362_CPU_ID;
++                              bcm63xx_regs_base = bcm6362_regs_base;
++                              bcm63xx_irqs = bcm6362_irqs;
++                              break;
+                       case BCM6368_CPU_ID:
+                               expected_cpu_id = BCM6368_CPU_ID;
+                               bcm63xx_regs_base = bcm6368_regs_base;
+--- a/arch/mips/bcm63xx/irq.c
++++ b/arch/mips/bcm63xx/irq.c
+@@ -82,6 +82,14 @@ static void __internal_irq_unmask_64(uns
+ #define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6358
+ #define ext_irq_cfg_reg2      0
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++#define irq_stat_reg          PERF_IRQSTAT_6362_REG
++#define irq_mask_reg          PERF_IRQMASK_6362_REG
++#define irq_bits              64
++#define is_ext_irq_cascaded   1
++#define ext_irq_start         (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
++#define ext_irq_end           (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ #define irq_stat_reg          PERF_IRQSTAT_6368_REG
+ #define irq_mask_reg          PERF_IRQMASK_6368_REG
+@@ -170,6 +178,16 @@ static void bcm63xx_init_irq(void)
+               ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
+               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
+               break;
++      case BCM6362_CPU_ID:
++              irq_stat_addr += PERF_IRQSTAT_6362_REG;
++              irq_mask_addr += PERF_IRQMASK_6362_REG;
++              irq_bits = 64;
++              ext_irq_count = 4;
++              is_ext_irq_cascaded = 1;
++              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
++              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
++              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
++              break;
+       case BCM6368_CPU_ID:
+               irq_stat_addr += PERF_IRQSTAT_6368_REG;
+               irq_mask_addr += PERF_IRQMASK_6368_REG;
+@@ -457,6 +475,7 @@ static int bcm63xx_external_irq_set_type
+       case BCM6338_CPU_ID:
+       case BCM6345_CPU_ID:
+       case BCM6358_CPU_ID:
++      case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
+               if (levelsense)
+                       reg |= EXTIRQ_CFG_LEVELSENSE(irq);
+--- a/arch/mips/bcm63xx/prom.c
++++ b/arch/mips/bcm63xx/prom.c
+@@ -36,6 +36,8 @@ void __init prom_init(void)
+               mask = CKCTL_6348_ALL_SAFE_EN;
+       else if (BCMCPU_IS_6358())
+               mask = CKCTL_6358_ALL_SAFE_EN;
++      else if (BCMCPU_IS_6362())
++              mask = CKCTL_6362_ALL_SAFE_EN;
+       else if (BCMCPU_IS_6368())
+               mask = CKCTL_6368_ALL_SAFE_EN;
+       else
+--- a/arch/mips/bcm63xx/setup.c
++++ b/arch/mips/bcm63xx/setup.c
+@@ -83,6 +83,9 @@ void bcm63xx_machine_reboot(void)
+       case BCM6358_CPU_ID:
+               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
+               break;
++      case BCM6362_CPU_ID:
++              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362;
++              break;
+       }
+       for (i = 0; i < 2; i++) {
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+@@ -14,6 +14,7 @@
+ #define BCM6345_CPU_ID                0x6345
+ #define BCM6348_CPU_ID                0x6348
+ #define BCM6358_CPU_ID                0x6358
++#define BCM6362_CPU_ID                0x6362
+ #define BCM6368_CPU_ID                0x6368
+ void __init bcm63xx_cpu_init(void);
+@@ -86,6 +87,20 @@ unsigned int bcm63xx_get_cpu_freq(void);
+ # define BCMCPU_IS_6358()     (0)
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++# ifdef bcm63xx_get_cpu_id
++#  undef bcm63xx_get_cpu_id
++#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
++#  define BCMCPU_RUNTIME_DETECT
++# else
++#  define bcm63xx_get_cpu_id()        BCM6362_CPU_ID
++# endif
++# define BCMCPU_IS_6362()     (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
++#else
++# define BCMCPU_IS_6362()     (0)
++#endif
++
++
+ #ifdef CONFIG_BCM63XX_CPU_6368
+ # ifdef bcm63xx_get_cpu_id
+ #  undef bcm63xx_get_cpu_id
+@@ -402,6 +417,62 @@ enum bcm63xx_regs_set {
+ /*
++ * 6362 register sets base address
++ */
++#define BCM_6362_DSL_LMEM_BASE                (0xdeadbeef)
++#define BCM_6362_PERF_BASE            (0xb0000000)
++#define BCM_6362_TIMER_BASE           (0xb0000040)
++#define BCM_6362_WDT_BASE             (0xb000005c)
++#define BCM_6362_UART0_BASE             (0xb0000100)
++#define BCM_6362_UART1_BASE           (0xb0000120)
++#define BCM_6362_GPIO_BASE            (0xb0000080)
++#define BCM_6362_SPI_BASE             (0xb0000800)
++#define BCM_6362_HSSPI_BASE           (0xb0001000)
++#define BCM_6362_UDC0_BASE            (0xdeadbeef)
++#define BCM_6362_USBDMA_BASE          (0xb000c000)
++#define BCM_6362_OHCI0_BASE           (0xb0002600)
++#define BCM_6362_OHCI_PRIV_BASE               (0xdeadbeef)
++#define BCM_6362_USBH_PRIV_BASE               (0xb0002700)
++#define BCM_6362_USBD_BASE            (0xb0002400)
++#define BCM_6362_MPI_BASE             (0xdeadbeef)
++#define BCM_6362_PCMCIA_BASE          (0xdeadbeef)
++#define BCM_6362_PCIE_BASE            (0xb0e40000)
++#define BCM_6362_SDRAM_REGS_BASE      (0xdeadbeef)
++#define BCM_6362_DSL_BASE             (0xdeadbeef)
++#define BCM_6362_UBUS_BASE            (0xdeadbeef)
++#define BCM_6362_ENET0_BASE           (0xdeadbeef)
++#define BCM_6362_ENET1_BASE           (0xdeadbeef)
++#define BCM_6362_ENETDMA_BASE         (0xb000d800)
++#define BCM_6362_ENETDMAC_BASE                (0xb000da00)
++#define BCM_6362_ENETDMAS_BASE                (0xb000dc00)
++#define BCM_6362_ENETSW_BASE          (0xb0e00000)
++#define BCM_6362_EHCI0_BASE           (0xb0002500)
++#define BCM_6362_SDRAM_BASE           (0xdeadbeef)
++#define BCM_6362_MEMC_BASE            (0xdeadbeef)
++#define BCM_6362_DDR_BASE             (0xb0003000)
++#define BCM_6362_M2M_BASE             (0xdeadbeef)
++#define BCM_6362_ATM_BASE             (0xdeadbeef)
++#define BCM_6362_XTM_BASE             (0xb0007800)
++#define BCM_6362_XTMDMA_BASE          (0xb000b800)
++#define BCM_6362_XTMDMAC_BASE         (0xdeadbeef)
++#define BCM_6362_XTMDMAS_BASE         (0xdeadbeef)
++#define BCM_6362_PCM_BASE             (0xb000a800)
++#define BCM_6362_PCMDMA_BASE          (0xdeadbeef)
++#define BCM_6362_PCMDMAC_BASE         (0xdeadbeef)
++#define BCM_6362_PCMDMAS_BASE         (0xdeadbeef)
++#define BCM_6362_RNG_BASE             (0xdeadbeef)
++#define BCM_6362_MISC_BASE            (0xb0001800)
++
++#define BCM_6362_NAND_REG_BASE                (0xb0000200)
++#define BCM_6362_NAND_CACHE_BASE      (0xb0000600)
++#define BCM_6362_LED_BASE             (0xb0001900)
++#define BCM_6362_IPSEC_BASE           (0xb0002800)
++#define BCM_6362_IPSEC_DMA_BASE               (0xb000d000)
++#define BCM_6362_WLAN_CHIPCOMMON_BASE (0xb0004000)
++#define BCM_6362_WLAN_D11_BASE                (0xb0005000)
++#define BCM_6362_WLAN_SHIM_BASE               (0xb0007000)
++
++/*
+  * 6368 register sets base address
+  */
+ #define BCM_6368_DSL_LMEM_BASE                (0xdeadbeef)
+@@ -557,6 +628,9 @@ static inline unsigned long bcm63xx_regs
+ #ifdef CONFIG_BCM63XX_CPU_6358
+       __GEN_RSET(6358)
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      __GEN_RSET(6362)
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       __GEN_RSET(6368)
+ #endif
+@@ -777,6 +851,71 @@ enum bcm63xx_irq {
+ #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
+ /*
++ * 6362 irqs
++ */
++#define BCM_6362_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
++
++#define BCM_6362_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
++#define BCM_6362_SPI_IRQ              (IRQ_INTERNAL_BASE + 2)
++#define BCM_6362_UART0_IRQ            (IRQ_INTERNAL_BASE + 3)
++#define BCM_6362_UART1_IRQ            (IRQ_INTERNAL_BASE + 4)
++#define BCM_6362_DSL_IRQ              (IRQ_INTERNAL_BASE + 28)
++#define BCM_6362_UDC0_IRQ             0
++#define BCM_6362_ENET0_IRQ            0
++#define BCM_6362_ENET1_IRQ            0
++#define BCM_6362_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 14)
++#define BCM_6362_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 5)
++#define BCM_6362_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 9)
++#define BCM_6362_EHCI0_IRQ            (IRQ_INTERNAL_BASE + 10)
++#define BCM_6362_USBD_IRQ             (IRQ_INTERNAL_BASE + 11)
++#define BCM_6362_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 20)
++#define BCM_6362_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 21)
++#define BCM_6362_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 22)
++#define BCM_6362_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 23)
++#define BCM_6362_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 24)
++#define BCM_6362_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 25)
++#define BCM_6362_PCMCIA_IRQ           0
++#define BCM_6362_ENET0_RXDMA_IRQ      0
++#define BCM_6362_ENET0_TXDMA_IRQ      0
++#define BCM_6362_ENET1_RXDMA_IRQ      0
++#define BCM_6362_ENET1_TXDMA_IRQ      0
++#define BCM_6362_PCI_IRQ              (IRQ_INTERNAL_BASE + 30)
++#define BCM_6362_ATM_IRQ              0
++#define BCM_6362_ENETSW_RXDMA0_IRQ    (BCM_6362_HIGH_IRQ_BASE + 0)
++#define BCM_6362_ENETSW_RXDMA1_IRQ    (BCM_6362_HIGH_IRQ_BASE + 1)
++#define BCM_6362_ENETSW_RXDMA2_IRQ    (BCM_6362_HIGH_IRQ_BASE + 2)
++#define BCM_6362_ENETSW_RXDMA3_IRQ    (BCM_6362_HIGH_IRQ_BASE + 3)
++#define BCM_6362_ENETSW_TXDMA0_IRQ    0
++#define BCM_6362_ENETSW_TXDMA1_IRQ    0
++#define BCM_6362_ENETSW_TXDMA2_IRQ    0
++#define BCM_6362_ENETSW_TXDMA3_IRQ    0
++#define BCM_6362_XTM_IRQ              0
++#define BCM_6362_XTM_DMA0_IRQ         (BCM_6362_HIGH_IRQ_BASE + 12)
++
++#define BCM_6362_RING_OSC_IRQ         (IRQ_INTERNAL_BASE + 1)
++#define BCM_6362_WLAN_GPIO_IRQ                (IRQ_INTERNAL_BASE + 6)
++#define BCM_6362_WLAN_IRQ             (IRQ_INTERNAL_BASE + 7)
++#define BCM_6362_IPSEC_IRQ            (IRQ_INTERNAL_BASE + 8)
++#define BCM_6362_NAND_IRQ             (IRQ_INTERNAL_BASE + 12)
++#define BCM_6362_PCM_IRQ              (IRQ_INTERNAL_BASE + 13)
++#define BCM_6362_DG_IRQ                       (IRQ_INTERNAL_BASE + 15)
++#define BCM_6362_EPHY_ENERGY0_IRQ     (IRQ_INTERNAL_BASE + 16)
++#define BCM_6362_EPHY_ENERGY1_IRQ     (IRQ_INTERNAL_BASE + 17)
++#define BCM_6362_EPHY_ENERGY2_IRQ     (IRQ_INTERNAL_BASE + 18)
++#define BCM_6362_EPHY_ENERGY3_IRQ     (IRQ_INTERNAL_BASE + 19)
++#define BCM_6362_IPSEC_DMA0_IRQ               (IRQ_INTERNAL_BASE + 26)
++#define BCM_6362_IPSEC_DMA1_IRQ               (IRQ_INTERNAL_BASE + 27)
++#define BCM_6362_FAP0_IRQ             (IRQ_INTERNAL_BASE + 29)
++#define BCM_6362_PCM_DMA0_IRQ         (BCM_6362_HIGH_IRQ_BASE + 4)
++#define BCM_6362_PCM_DMA1_IRQ         (BCM_6362_HIGH_IRQ_BASE + 5)
++#define BCM_6362_DECT0_IRQ            (BCM_6362_HIGH_IRQ_BASE + 6)
++#define BCM_6362_DECT1_IRQ            (BCM_6362_HIGH_IRQ_BASE + 7)
++#define BCM_6362_EXT_IRQ0             (BCM_6362_HIGH_IRQ_BASE + 8)
++#define BCM_6362_EXT_IRQ1             (BCM_6362_HIGH_IRQ_BASE + 9)
++#define BCM_6362_EXT_IRQ2             (BCM_6362_HIGH_IRQ_BASE + 10)
++#define BCM_6362_EXT_IRQ3             (BCM_6362_HIGH_IRQ_BASE + 11)
++
++/*
+  * 6368 irqs
+  */
+ #define BCM_6368_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+@@ -17,6 +17,8 @@ static inline unsigned long bcm63xx_gpio
+               return 8;
+       case BCM6345_CPU_ID:
+               return 16;
++      case BCM6362_CPU_ID:
++              return 48;
+       case BCM6368_CPU_ID:
+               return 38;
+       case BCM6348_CPU_ID:
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -107,6 +107,39 @@
+                                       CKCTL_6358_USBSU_EN |           \
+                                       CKCTL_6358_EPHY_EN)
++#define CKCTL_6362_ADSL_QPROC_EN      (1 << 1)
++#define CKCTL_6362_ADSL_AFE_EN                (1 << 2)
++#define CKCTL_6362_ADSL_EN            (1 << 3)
++#define CKCTL_6362_MIPS_EN            (1 << 4)
++#define CKCTL_6362_WLAN_OCP_EN                (1 << 5)
++#define CKCTL_6362_SWPKT_USB_EN               (1 << 7)
++#define CKCTL_6362_SWPKT_SAR_EN               (1 << 8)
++#define CKCTL_6362_SAR_EN             (1 << 9)
++#define CKCTL_6362_ROBOSW_EN          (1 << 10)
++#define CKCTL_6362_PCM_EN             (1 << 11)
++#define CKCTL_6362_USBD_EN            (1 << 12)
++#define CKCTL_6362_USBH_EN            (1 << 13)
++#define CKCTL_6362_IPSEC_EN           (1 << 14)
++#define CKCTL_6362_SPI_EN             (1 << 15)
++#define CKCTL_6362_HSSPI_EN           (1 << 16)
++#define CKCTL_6362_PCIE_EN            (1 << 17)
++#define CKCTL_6362_FAP_EN             (1 << 18)
++#define CKCTL_6362_PHYMIPS_EN         (1 << 19)
++#define CKCTL_6362_NAND_EN            (1 << 20)
++
++#define CKCTL_6362_ALL_SAFE_EN                (CKCTL_6362_PHYMIPS_EN |        \
++                                      CKCTL_6362_ADSL_QPROC_EN |      \
++                                      CKCTL_6362_ADSL_AFE_EN |        \
++                                      CKCTL_6362_ADSL_EN |            \
++                                      CKCTL_6362_SAR_EN  |            \
++                                      CKCTL_6362_PCM_EN  |            \
++                                      CKCTL_6362_IPSEC_EN |           \
++                                      CKCTL_6362_USBD_EN |            \
++                                      CKCTL_6362_USBH_EN |            \
++                                      CKCTL_6362_ROBOSW_EN |          \
++                                      CKCTL_6362_PCIE_EN)
++
++
+ #define CKCTL_6368_VDSL_QPROC_EN      (1 << 2)
+ #define CKCTL_6368_VDSL_AFE_EN                (1 << 3)
+ #define CKCTL_6368_VDSL_BONDING_EN    (1 << 4)
+@@ -148,6 +181,7 @@
+ #define PERF_IRQMASK_6345_REG         0xc
+ #define PERF_IRQMASK_6348_REG         0xc
+ #define PERF_IRQMASK_6358_REG         0xc
++#define PERF_IRQMASK_6362_REG         0x20
+ #define PERF_IRQMASK_6368_REG         0x20
+ /* Interrupt Status register */
+@@ -156,6 +190,7 @@
+ #define PERF_IRQSTAT_6345_REG         0x10
+ #define PERF_IRQSTAT_6348_REG         0x10
+ #define PERF_IRQSTAT_6358_REG         0x10
++#define PERF_IRQSTAT_6362_REG         0x28
+ #define PERF_IRQSTAT_6368_REG         0x28
+ /* External Interrupt Configuration register */
+@@ -164,6 +199,7 @@
+ #define PERF_EXTIRQ_CFG_REG_6345      0x14
+ #define PERF_EXTIRQ_CFG_REG_6348      0x14
+ #define PERF_EXTIRQ_CFG_REG_6358      0x14
++#define PERF_EXTIRQ_CFG_REG_6362      0x18
+ #define PERF_EXTIRQ_CFG_REG_6368      0x18
+ #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
+@@ -191,6 +227,7 @@
+ /* Soft Reset register */
+ #define PERF_SOFTRESET_REG            0x28
+ #define PERF_SOFTRESET_6328_REG               0x10
++#define PERF_SOFTRESET_6362_REG               0x10
+ #define PERF_SOFTRESET_6368_REG               0x10
+ #define SOFTRESET_6328_SPI_MASK               (1 << 0)
+@@ -244,6 +281,22 @@
+                                 SOFTRESET_6348_ACLC_MASK |            \
+                                 SOFTRESET_6348_ADSLMIPSPLL_MASK)
++#define SOFTRESET_6362_SPI_MASK               (1 << 0)
++#define SOFTRESET_6362_IPSEC_MASK     (1 << 1)
++#define SOFTRESET_6362_EPHY_MASK      (1 << 2)
++#define SOFTRESET_6362_SAR_MASK               (1 << 3)
++#define SOFTRESET_6362_ENETSW_MASK    (1 << 4)
++#define SOFTRESET_6362_USBS_MASK      (1 << 5)
++#define SOFTRESET_6362_USBH_MASK      (1 << 6)
++#define SOFTRESET_6362_PCM_MASK               (1 << 7)
++#define SOFTRESET_6362_PCIE_CORE_MASK (1 << 8)
++#define SOFTRESET_6362_PCIE_MASK      (1 << 9)
++#define SOFTRESET_6362_PCIE_EXT_MASK  (1 << 10)
++#define SOFTRESET_6362_WLAN_SHIM_MASK (1 << 11)
++#define SOFTRESET_6362_DDR_PHY_MASK   (1 << 12)
++#define SOFTRESET_6362_FAP_MASK               (1 << 13)
++#define SOFTRESET_6362_WLAN_UBUS_MASK (1 << 14)
++
+ #define SOFTRESET_6368_SPI_MASK               (1 << 0)
+ #define SOFTRESET_6368_MPI_MASK               (1 << 3)
+ #define SOFTRESET_6368_EPHY_MASK      (1 << 6)
+@@ -1174,6 +1227,12 @@
+ #define SERDES_PCIE_EN                        (1 << 0)
+ #define SERDES_PCIE_EXD_EN            (1 << 15)
++#define MISC_STRAPBUS_6362_REG                0x14
++#define STRAPBUS_6362_FCVO_SHIFT      1
++#define STRAPBUS_6362_FCVO_MASK               (0x1f << STRAPBUS_6362_FCVO_SHIFT)
++#define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
++#define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
++
+ #define MISC_STRAPBUS_6328_REG                0x240
+ #define STRAPBUS_6328_FCVO_SHIFT      7
+ #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
+--- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
++++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
+@@ -19,6 +19,7 @@ static inline int is_bcm63xx_internal_re
+                       return 1;
+               break;
+       case BCM6328_CPU_ID:
++      case BCM6362_CPU_ID:
+       case BCM6368_CPU_ID:
+               if (offset >= 0xb0000000 && offset < 0xb1000000)
+                       return 1;
diff --git a/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..1b3a0d9
--- /dev/null
@@ -0,0 +1,110 @@
+From e49546bf3f255f028d0877ceeb7ed6466fe37d8a Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 21 Nov 2011 00:53:26 +0100
+Subject: [PATCH 56/84] MIPS: BCM63XX: enable pcie for BCM6362
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    3 +-
+ arch/mips/pci/pci-bcm63xx.c                       |   57 +++++++++++++++------
+ 2 files changed, 44 insertions(+), 16 deletions(-)
+
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1223,7 +1223,8 @@
+ /*************************************************************************
+  * _REG relative to RSET_MISC
+  *************************************************************************/
+-#define MISC_SERDES_CTRL_REG          0x0
++#define MISC_SERDES_CTRL_6328_REG     0x0
++#define MISC_SERDES_CTRL_6362_REG     0x4
+ #define SERDES_PCIE_EN                        (1 << 0)
+ #define SERDES_PCIE_EXD_EN            (1 << 15)
+--- a/arch/mips/pci/pci-bcm63xx.c
++++ b/arch/mips/pci/pci-bcm63xx.c
+@@ -118,35 +118,61 @@ void __iomem *pci_iospace_start;
+ static void __init bcm63xx_reset_pcie(void)
+ {
+       u32 val;
++      u32 reg;
++      u32 mask;
+       /* enable clock */
++
++      if (BCMCPU_IS_6328())
++              mask = CKCTL_6328_PCIE_EN;
++      else
++              mask = CKCTL_6362_PCIE_EN;
++
+       val = bcm_perf_readl(PERF_CKCTL_REG);
+-      val |= CKCTL_6328_PCIE_EN;
++      val |= mask;
+       bcm_perf_writel(val, PERF_CKCTL_REG);
+       /* enable SERDES */
+-      val = bcm_misc_readl(MISC_SERDES_CTRL_REG);
++
++      if (BCMCPU_IS_6328())
++              reg = MISC_SERDES_CTRL_6328_REG;
++      else
++              reg = MISC_SERDES_CTRL_6362_REG;
++
++      val = bcm_misc_readl(reg);
+       val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
+-      bcm_misc_writel(val, MISC_SERDES_CTRL_REG);
++      bcm_misc_writel(val, reg);
+       /* reset the PCIe core */
+-      val = bcm_perf_readl(PERF_SOFTRESET_6328_REG);
++      if (BCMCPU_IS_6328()) {
++              reg = PERF_SOFTRESET_6328_REG;
++              mask = SOFTRESET_6328_PCIE_MASK | SOFTRESET_6328_PCIE_CORE_MASK
++                              | SOFTRESET_6328_PCIE_HARD_MASK;
++      } else {
++              reg = PERF_SOFTRESET_6362_REG;
++              mask = SOFTRESET_6362_PCIE_MASK | SOFTRESET_6362_PCIE_CORE_MASK;
++      }
++      val = bcm_perf_readl(reg);
++      val &= ~mask;
++
++      if (BCMCPU_IS_6328())
++              val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
++      else
++              val &= ~SOFTRESET_6362_PCIE_EXT_MASK;
+-      val &= ~SOFTRESET_6328_PCIE_MASK;
+-      val &= ~SOFTRESET_6328_PCIE_CORE_MASK;
+-      val &= ~SOFTRESET_6328_PCIE_HARD_MASK;
+-      val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
+-      bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
++      bcm_perf_writel(val, reg);
+       mdelay(10);
+-      val |= SOFTRESET_6328_PCIE_MASK;
+-      val |= SOFTRESET_6328_PCIE_CORE_MASK;
+-      val |= SOFTRESET_6328_PCIE_HARD_MASK;
+-      bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
++      val |= mask;
++      bcm_perf_writel(val, reg);
+       mdelay(10);
+-      val |= SOFTRESET_6328_PCIE_EXT_MASK;
+-      bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
++      if (BCMCPU_IS_6328())
++              val |= SOFTRESET_6328_PCIE_EXT_MASK;
++      else
++              val |= SOFTRESET_6362_PCIE_EXT_MASK;
++
++      bcm_perf_writel(val, reg);
+       mdelay(200);
+ }
+@@ -332,6 +358,7 @@ static int __init bcm63xx_pci_init(void)
+       switch (bcm63xx_get_cpu_id()) {
+       case BCM6328_CPU_ID:
++      case BCM6362_CPU_ID:
+               return bcm63xx_register_pcie();
+       case BCM6348_CPU_ID:
+       case BCM6358_CPU_ID:
index e9a3c4fef80d067cd789f30361007fadabc7f2b9..27ecc5a8b8a281bc8170fe20427413b0e4e1c428 100644 (file)
@@ -15,7 +15,7 @@ Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device.
 
 --- a/arch/mips/bcm63xx/Kconfig
 +++ b/arch/mips/bcm63xx/Kconfig
-@@ -8,26 +8,25 @@ config BCM63XX_CPU_6328
+@@ -8,22 +8,20 @@ config BCM63XX_CPU_6328
  config BCM63XX_CPU_6338
        bool "support 6338 CPU"
        select HW_HAS_PCI
@@ -39,6 +39,9 @@ Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device.
        select HW_HAS_PCI
 +      select USB_ARCH_HAS_OHCI if USB_SUPPORT
  
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+@@ -32,6 +30,7 @@ config BCM63XX_CPU_6362
  config BCM63XX_CPU_6368
        bool "support 6368 CPU"
        select HW_HAS_PCI
index 65117974f42ba079f3f98f5fa7cde09a40102f43..cd5eb73cedc3929b039a1fe4ce01547d5ba42d7b 100644 (file)
@@ -15,13 +15,15 @@ Subject: [PATCH 26/63] MIPS: BCM63XX: register ehci device.
 
 --- a/arch/mips/bcm63xx/Kconfig
 +++ b/arch/mips/bcm63xx/Kconfig
-@@ -22,11 +22,13 @@ config BCM63XX_CPU_6358
+@@ -22,6 +22,7 @@ config BCM63XX_CPU_6358
        bool "support 6358 CPU"
        select HW_HAS_PCI
        select USB_ARCH_HAS_OHCI if USB_SUPPORT
 +      select USB_ARCH_HAS_EHCI if USB_SUPPORT
  
- config BCM63XX_CPU_6368
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+@@ -31,6 +32,7 @@ config BCM63XX_CPU_6368
        bool "support 6368 CPU"
        select HW_HAS_PCI
        select USB_ARCH_HAS_OHCI if USB_SUPPORT
index 5cefb8e804335b1a92f905d41c4b309253079f18..32c791569ae9e0378484fb2a444a7645f8eb2957 100644 (file)
@@ -11,7 +11,7 @@
        bcm_gpio_writel(val, GPIO_MODE_REG);
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -510,6 +510,8 @@
+@@ -563,6 +563,8 @@
  #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
  #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
  #define GPIO_MODE_6358_UTOPIA         (1 << 12)
index 280cd01d25baf34ad9a837b2e21db005b73b9a9b..90999fa9525f3a316cf1c91e1e5e922645bac766 100644 (file)
@@ -50,7 +50,7 @@ Subject: [PATCH 30/63] bcm63xx_enet: split dma registers access.
                if (ret)
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -157,7 +157,9 @@ enum bcm63xx_regs_set {
+@@ -172,7 +172,9 @@ enum bcm63xx_regs_set {
  #define BCM_6358_RSET_SPI_SIZE                1804
  #define BCM_6368_RSET_SPI_SIZE                1804
  #define RSET_ENET_SIZE                        2048
index feab03a265652db2e58c62ddf756ca36f8102df8..7752b4ee718211205353c607765f3dc7042952d4 100644 (file)
@@ -205,7 +205,7 @@ Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet s
  #endif /* ! BCM63XX_DEV_ENET_H_ */
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -750,10 +750,60 @@
+@@ -803,10 +803,60 @@
   * _REG relative to RSET_ENETSW
   *************************************************************************/
  
index b71e1dc3694d5d5af6443259e9025ae7f17d1f09..217ddae932fe9345e414e18d4539b2f96c900fb9 100644 (file)
@@ -10,7 +10,7 @@ Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
 
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -779,6 +779,19 @@
+@@ -832,6 +832,19 @@
  #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
  #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
  
index f3bf2cd33f971830d641be56d6f343e34b8d7a6b..229a5856313e9f7636cc67f7b5a45b22a6ae345b 100644 (file)
@@ -84,7 +84,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
                return -ENODEV;
 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
 +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -555,6 +555,7 @@
+@@ -608,6 +608,7 @@
  #define GPIO_STRAPBUS_REG             0x40
  #define STRAPBUS_6358_BOOT_SEL_PARALLEL       (1 << 1)
  #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
@@ -92,8 +92,8 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
  #define STRAPBUS_6368_BOOT_SEL_NAND   0
  #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1240,6 +1241,7 @@
- #define SERDES_PCIE_EXD_EN            (1 << 15)
+@@ -1300,6 +1301,7 @@
+ #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
  
  #define MISC_STRAPBUS_6328_REG                0x240
 +#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
diff --git a/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..d913201
--- /dev/null
@@ -0,0 +1,50 @@
+From d9666553a10ea85ea64e3e8784a42167a1709ed5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 21 Nov 2011 00:48:52 +0100
+Subject: [PATCH 55/84] MIPS: BCM63XX: add flash detection for BCM6362
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/dev-flash.c                     |   13 ++++++++++++-
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
+ 2 files changed, 13 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm63xx/dev-flash.c
++++ b/arch/mips/bcm63xx/dev-flash.c
+@@ -100,6 +100,17 @@ static int __init bcm63xx_detect_flash_t
+                       return BCM63XX_FLASH_TYPE_PARALLEL;
+               else
+                       return BCM63XX_FLASH_TYPE_SERIAL;
++      case BCM6362_CPU_ID:
++              val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
++              if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
++              else
++                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
++
++              if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
++                      return BCM63XX_FLASH_TYPE_SERIAL;
++              else
++                      return BCM63XX_FLASH_TYPE_NAND;
+       case BCM6368_CPU_ID:
+               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
+               if (val & STRAPBUS_6368_SPI_CLK_FAST)
+@@ -136,7 +147,7 @@ int __init bcm63xx_flash_register(void)
+               return platform_device_register(&mtd_dev);
+       case BCM63XX_FLASH_TYPE_SERIAL:
+-              if (BCMCPU_IS_6328())
++              if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
+                       bcm63xx_flash_data.max_transfer_len = HSSPI_BUFFER_LEN;
+               return spi_register_board_info(bcm63xx_spi_flash_info,
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1296,6 +1296,7 @@
+ #define MISC_STRAPBUS_6362_REG                0x14
+ #define STRAPBUS_6362_FCVO_SHIFT      1
++#define STRAPBUS_6362_HSSPI_CLK_FAST  (1 << 13)
+ #define STRAPBUS_6362_FCVO_MASK               (0x1f << STRAPBUS_6362_FCVO_SHIFT)
+ #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
+ #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
index 6e5cdbe840bf37146a8b203f4d423aafbc10a335..7035098202688567fb2ed9672bb02ec20b9e7326 100644 (file)
@@ -44,11 +44,24 @@ Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
                else
 -                      return BCM63XX_FLASH_TYPE_SERIAL;
 +                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
++              break;
+       case BCM6362_CPU_ID:
+               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
+               if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
+@@ -108,9 +113,10 @@ static int __init bcm63xx_detect_flash_t
+                       bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
+               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
+-                      return BCM63XX_FLASH_TYPE_SERIAL;
++                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
+               else
+-                      return BCM63XX_FLASH_TYPE_NAND;
++                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
 +              break;
        case BCM6368_CPU_ID:
                val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
                if (val & STRAPBUS_6368_SPI_CLK_FAST)
-@@ -107,25 +112,32 @@ static int __init bcm63xx_detect_flash_t
+@@ -118,25 +124,32 @@ static int __init bcm63xx_detect_flash_t
  
                switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
                case STRAPBUS_6368_BOOT_SEL_NAND:
@@ -87,7 +100,7 @@ Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
        case BCM63XX_FLASH_TYPE_PARALLEL:
                /* read base address of boot chip select (0) */
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-@@ -146,7 +158,7 @@ int __init bcm63xx_flash_register(void)
+@@ -157,7 +170,7 @@ int __init bcm63xx_flash_register(void)
                return -ENODEV;
        default:
                pr_err("flash detection failed for BCM%x: %d\n",
index 2c7368477e66a9029060e04b0d531343f8c67eb4..541efd2eb1f9fefbc145853d13aea9174129066b 100644 (file)
@@ -46,7 +46,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
  };
  
  static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -130,10 +134,13 @@ static int __init bcm63xx_detect_flash_t
+@@ -142,10 +146,13 @@ static int __init bcm63xx_detect_flash_t
        return 0;
  }
  
diff --git a/target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch b/target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch
new file mode 100644 (file)
index 0000000..7561569
--- /dev/null
@@ -0,0 +1,56 @@
+From ed225910f0e062d9c28d5cf216f97b3cf457a8c5 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Mon, 21 Nov 2011 00:55:49 +0100
+Subject: [PATCH 58/81] MIPS: BCM63XX: wire up the HS SPI controller for BCM6362
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/clk.c                            |    2 ++
+ arch/mips/bcm63xx/dev-hsspi.c                      |    7 +++++--
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |    1 +
+ 3 files changed, 8 insertions(+), 2 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -218,6 +218,8 @@ static void hsspi_set(struct clk *clk, i
+       if (BCMCPU_IS_6328())
+               mask = CKCTL_6328_HSSPI_EN;
++      else if (BCMCPU_IS_6362())
++              mask = CKCTL_6362_HSSPI_EN;
+       else
+               return;
+--- a/arch/mips/bcm63xx/dev-hsspi.c
++++ b/arch/mips/bcm63xx/dev-hsspi.c
+@@ -43,7 +43,7 @@ static struct platform_device bcm63xx_hs
+ int __init bcm63xx_hsspi_register(void)
+ {
+-      if (!BCMCPU_IS_6328())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
+               return -ENODEV;
+       spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
+@@ -51,7 +51,10 @@ int __init bcm63xx_hsspi_register(void)
+       spi_resources[0].end += RSET_HSSPI_SIZE - 1;
+       spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
+-      spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
++      if (BCMCPU_IS_6328())
++              spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
++      else
++              spi_pdata.speed_hz = HSSPI_PLL_HZ;
+       return platform_device_register(&bcm63xx_hsspi_device);
+ }
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
+@@ -16,6 +16,7 @@ struct bcm63xx_hsspi_pdata {
+ #define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
+ #define HSSPI_PLL_HZ_6328     133333333
++#define HSSPI_PLL_HZ          400000000
+ #define HSSPI_BUFFER_LEN      512
diff --git a/target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..9057eba
--- /dev/null
@@ -0,0 +1,101 @@
+From eef84812bc7ffd590da6ad6b83bfeebaa43a7055 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Thu, 5 Jul 2012 21:19:20 +0200
+Subject: [PATCH 58/84] MIPS: BCM63XX: enable SPI controller for BCM6362
+
+---
+ arch/mips/bcm63xx/clk.c                            |    2 ++
+ arch/mips/bcm63xx/dev-spi.c                        |   11 ++++++++++-
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h     |    3 +++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h  |   16 ++++++++++++++++
+ 4 files changed, 31 insertions(+), 1 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -199,6 +199,8 @@ static void spi_set(struct clk *clk, int
+               mask = CKCTL_6348_SPI_EN;
+       else if (BCMCPU_IS_6358())
+               mask = CKCTL_6358_SPI_EN;
++      else if (BCMCPU_IS_6362())
++              mask = CKCTL_6362_SPI_EN;
+       else
+               /* BCMCPU_IS_6368 */
+               mask = CKCTL_6368_SPI_EN;
+--- a/arch/mips/bcm63xx/dev-spi.c
++++ b/arch/mips/bcm63xx/dev-spi.c
+@@ -34,6 +34,10 @@ static const unsigned long bcm6358_regs_
+       __GEN_SPI_REGS_TABLE(6358)
+ };
++static const unsigned long bcm6362_regs_spi[] = {
++      __GEN_SPI_REGS_TABLE(6362)
++};
++
+ static const unsigned long bcm6368_regs_spi[] = {
+       __GEN_SPI_REGS_TABLE(6368)
+ };
+@@ -49,6 +53,8 @@ static __init void bcm63xx_spi_regs_init
+               bcm63xx_regs_spi = bcm6348_regs_spi;
+       if (BCMCPU_IS_6358())
+               bcm63xx_regs_spi = bcm6358_regs_spi;
++      if (BCMCPU_IS_6362())
++              bcm63xx_regs_spi = bcm6362_regs_spi;
+       if (BCMCPU_IS_6368())
+               bcm63xx_regs_spi = bcm6368_regs_spi;
+ }
+@@ -99,6 +105,9 @@ int __init bcm63xx_spi_register(void)
+       /* Set bus frequency */
+       spi_pdata.speed_hz = clk_get_rate(periph_clk);
++      if (BCMCPU_IS_6362())
++              spi_pdata.bus_num = 1;
++
+       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
+       spi_resources[0].end = spi_resources[0].start;
+       spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
+@@ -110,7 +119,7 @@ int __init bcm63xx_spi_register(void)
+               spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
+       }
+-      if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
++      if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
+               spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
+               spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+@@ -81,6 +81,9 @@ static inline unsigned long bcm63xx_spir
+ #ifdef CONFIG_BCM63XX_CPU_6358
+       __GEN_SPI_RSET(6358)
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_6362
++      __GEN_SPI_RSET(6362)
++#endif
+ #ifdef CONFIG_BCM63XX_CPU_6368
+       __GEN_SPI_RSET(6368)
+ #endif
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+@@ -1215,6 +1215,22 @@
+ #define SPI_6358_MSG_TAIL             0x709
+ #define SPI_6358_RX_TAIL              0x70B
++/* BCM 6362 SPI core */
++#define SPI_6362_MSG_CTL              0x00    /* 16-bits register */
++#define SPI_6362_MSG_DATA             0x02
++#define SPI_6362_MSG_DATA_SIZE                0x21e
++#define SPI_6362_RX_DATA              0x400
++#define SPI_6362_RX_DATA_SIZE         0x220
++#define SPI_6362_CMD                  0x700   /* 16-bits register */
++#define SPI_6362_INT_STATUS           0x702
++#define SPI_6362_INT_MASK_ST          0x703
++#define SPI_6362_INT_MASK             0x704
++#define SPI_6362_ST                   0x705
++#define SPI_6362_CLK_CFG              0x706
++#define SPI_6362_FILL_BYTE            0x707
++#define SPI_6362_MSG_TAIL             0x709
++#define SPI_6362_RX_TAIL              0x70B
++
+ /* BCM 6358 SPI core */
+ #define SPI_6368_MSG_CTL              0x00    /* 16-bits register */
+ #define SPI_6368_MSG_CTL_WIDTH                16
diff --git a/target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..04d540f
--- /dev/null
@@ -0,0 +1,84 @@
+From fb9e98936590637c26b66d60137a7b44b329a254 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 12 Feb 2012 14:40:56 +0100
+Subject: [PATCH 59/84] MIPS: BCM63XX: enable USB for BCM6362
+
+BCM6362 has the same USB controller as BCM6368.
+
+Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
+---
+ arch/mips/bcm63xx/Kconfig        |    2 ++
+ arch/mips/bcm63xx/clk.c          |    4 ++++
+ arch/mips/bcm63xx/dev-usb-ehci.c |    3 ++-
+ arch/mips/bcm63xx/dev-usb-ohci.c |    2 +-
+ drivers/usb/host/ehci-bcm63xx.c  |    2 +-
+ drivers/usb/host/ohci-bcm63xx.c  |    2 +-
+ 6 files changed, 11 insertions(+), 4 deletions(-)
+
+--- a/arch/mips/bcm63xx/Kconfig
++++ b/arch/mips/bcm63xx/Kconfig
+@@ -27,6 +27,8 @@ config BCM63XX_CPU_6358
+ config BCM63XX_CPU_6362
+       bool "support 6362 CPU"
+       select HW_HAS_PCI
++      select USB_ARCH_HAS_OHCI if USB_SUPPORT
++      select USB_ARCH_HAS_EHCI if USB_SUPPORT
+ config BCM63XX_CPU_6368
+       bool "support 6368 CPU"
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -178,6 +178,8 @@ static void usbh_set(struct clk *clk, in
+ {
+       if (BCMCPU_IS_6348())
+               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
++      else if (BCMCPU_IS_6362())
++              bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
+       else if (BCMCPU_IS_6368())
+               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
+ }
+--- a/arch/mips/bcm63xx/dev-usb-ehci.c
++++ b/arch/mips/bcm63xx/dev-usb-ehci.c
+@@ -39,7 +39,8 @@ static struct platform_device bcm63xx_eh
+ int __init bcm63xx_ehci_register(void)
+ {
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() &&
++          !BCMCPU_IS_6368())
+               return 0;
+       ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
+--- a/arch/mips/bcm63xx/dev-usb-ohci.c
++++ b/arch/mips/bcm63xx/dev-usb-ohci.c
+@@ -40,7 +40,7 @@ static struct platform_device bcm63xx_oh
+ int __init bcm63xx_ohci_register(void)
+ {
+       if (!BCMCPU_IS_6328() && !BCMCPU_IS_6348() && !BCMCPU_IS_6358() &&
+-          !BCMCPU_IS_6368())
++          !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+               return 0;
+       ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
+--- a/drivers/usb/host/ehci-bcm63xx.c
++++ b/drivers/usb/host/ehci-bcm63xx.c
+@@ -99,7 +99,7 @@ static int __devinit ehci_hcd_bcm63xx_dr
+               bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
+                               USBH_PRIV_TEST_6358_REG);
+-      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+               reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
+--- a/drivers/usb/host/ohci-bcm63xx.c
++++ b/drivers/usb/host/ohci-bcm63xx.c
+@@ -94,7 +94,7 @@ static int __devinit ohci_hcd_bcm63xx_dr
+               bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
+                               USBH_PRIV_TEST_6358_REG);
+-      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
++      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() ||  BCMCPU_IS_6368()) {
+               reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+               reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
+               reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
diff --git a/target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch
new file mode 100644 (file)
index 0000000..ae46ec4
--- /dev/null
@@ -0,0 +1,77 @@
+From bf9d506bd144b95f8bb4127350ab2db5fba9c12e Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jonas.gorski@gmail.com>
+Date: Sun, 8 Jul 2012 21:07:12 +0200
+Subject: [PATCH 60/84] MIPS: BCM63XX: enable enetsw for BCM6362
+
+---
+ arch/mips/bcm63xx/clk.c                            |    7 ++++++-
+ arch/mips/bcm63xx/dev-enet.c                       |    6 ++++--
+ .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    |    1 +
+ 3 files changed, 11 insertions(+), 3 deletions(-)
+
+--- a/arch/mips/bcm63xx/clk.c
++++ b/arch/mips/bcm63xx/clk.c
+@@ -120,11 +120,13 @@ static void enetsw_set(struct clk *clk,
+ {
+       u32 mask;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+               return;
+       if (BCMCPU_IS_6328())
+               mask = CKCTL_6328_ROBOSW_EN;
++      else if (BCMCPU_IS_6362())
++              mask = CKCTL_6362_ROBOSW_EN;
+       else
+               mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN |
+                      CKCTL_6368_SWPKT_SAR_EN;
+@@ -137,6 +139,9 @@ static void enetsw_set(struct clk *clk,
+               if (BCMCPU_IS_6328()) {
+                       reg = PERF_SOFTRESET_6328_REG;
+                       mask = SOFTRESET_6328_ENETSW_MASK;
++              } else if (BCMCPU_IS_6362()) {
++                      reg = PERF_SOFTRESET_6362_REG;
++                      mask = SOFTRESET_6362_ENETSW_MASK;
+               } else {
+                       reg = PERF_SOFTRESET_6368_REG;
+                       mask = SOFTRESET_6368_ENETSW_MASK;
+--- a/arch/mips/bcm63xx/dev-enet.c
++++ b/arch/mips/bcm63xx/dev-enet.c
+@@ -141,7 +141,7 @@ static int __init register_shared(void)
+       shared_res[0].end = shared_res[0].start;
+       shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
+-      if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
++      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
+               chan_count = 32;
+       else
+               chan_count = 16;
+@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm
+ {
+       int ret;
+-      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
++      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
+               return -ENODEV;
+       ret = register_shared();
+@@ -243,6 +243,8 @@ bcm63xx_enetsw_register(const struct bcm
+       if (BCMCPU_IS_6328())
+               enetsw_pd.num_ports = ENETSW_PORTS_6328;
++      else if (BCMCPU_IS_6362())
++              enetsw_pd.num_ports = ENETSW_PORTS_6362;
+       else if (BCMCPU_IS_6368())
+               enetsw_pd.num_ports = ENETSW_PORTS_6368;
+--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
++++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
+@@ -44,6 +44,7 @@ struct bcm63xx_enet_platform_data {
+  */
+ #define ENETSW_MAX_PORT       6
+ #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
++#define ENETSW_PORTS_6362 6 /* 4 FE PHY + 2 RGMII */
+ #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
+ #define ENETSW_RGMII_PORT0    4
index 6fca36f2a1acbbbcb1e9fee23137a2bef0696dc2..7b4468ae7f857f7ae4d1f701f32c43f03f05b665 100644 (file)
  #include <bcm63xx_cpu.h>
  #include <bcm63xx_dev_flash.h>
  #include <bcm63xx_dev_hsspi.h>
-@@ -150,6 +151,13 @@ int __init bcm63xx_flash_register(int nu
+@@ -162,6 +163,13 @@ int __init bcm63xx_flash_register(int nu
                val = bcm_mpi_readl(MPI_CSBASE_REG(0));
                val &= MPI_CSBASE_BASE_MASK;