hostapd: add a build variant for wpa_supplicant and one for a multicall hostapd+suppl...
authorFelix Fietkau <nbd@openwrt.org>
Sat, 23 Jan 2010 08:28:26 +0000 (08:28 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Sat, 23 Jan 2010 08:28:26 +0000 (08:28 +0000)
SVN-Revision: 19286

28 files changed:
package/hostapd/Config.in [new file with mode: 0644]
package/hostapd/Makefile
package/hostapd/files/full.config [deleted file]
package/hostapd/files/hostapd-full.config [new file with mode: 0644]
package/hostapd/files/hostapd-mini.config [new file with mode: 0644]
package/hostapd/files/mini.config [deleted file]
package/hostapd/files/multicall.c [new file with mode: 0644]
package/hostapd/files/wpa_supplicant-full.config [new file with mode: 0644]
package/hostapd/files/wpa_supplicant-mini.config [new file with mode: 0644]
package/hostapd/files/wpa_supplicant.sh [new file with mode: 0644]
package/hostapd/patches/200-multicall.patch [new file with mode: 0644]
package/hostapd/patches/300-timestamp_check.patch [new file with mode: 0644]
package/hostapd/patches/310-scan_ssid.patch [new file with mode: 0644]
package/hostapd/patches/320-rescan_immediately.patch [new file with mode: 0644]
package/hostapd/patches/330-madwifi_merge.patch [new file with mode: 0644]
package/wpa_supplicant/Config.in [deleted file]
package/wpa_supplicant/Makefile [deleted file]
package/wpa_supplicant/config [deleted file]
package/wpa_supplicant/files/config.brcm-2.4 [deleted file]
package/wpa_supplicant/files/config.brcm47xx [deleted symlink]
package/wpa_supplicant/files/config.brcm63xx [deleted symlink]
package/wpa_supplicant/files/wpa_supplicant.sh [deleted file]
package/wpa_supplicant/patches/100-timestamp_check.patch [deleted file]
package/wpa_supplicant/patches/110-roaming.patch [deleted file]
package/wpa_supplicant/patches/120-ssid_scan.patch [deleted file]
package/wpa_supplicant/patches/130-scanning.patch [deleted file]
package/wpa_supplicant/patches/140-quality.patch [deleted file]
package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch [deleted file]

diff --git a/package/hostapd/Config.in b/package/hostapd/Config.in
new file mode 100644 (file)
index 0000000..e185820
--- /dev/null
@@ -0,0 +1,22 @@
+# wpa_supplicant config
+config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
+       bool "Disable timestamp check"
+       depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
+       default n
+       help
+         This disables the timestamp check for certificates in wpa_supplicant
+         Useful for devices without RTC that cannot reliably get the real date/time
+
+choice
+       prompt "Choose TLS provider"
+       default WPA_SUPPLICANT_INTERNAL
+       depends PACKAGE_wpa-supplicant
+
+config WPA_SUPPLICANT_INTERNAL
+       bool "internal"
+
+config WPA_SUPPLICANT_OPENSSL
+       bool "openssl"
+       select PACKAGE_libopenssl
+
+endchoice
index 682d6ab8524e4aab0e366708731176348993c7dd..cb31b58644c60fd89562f0a49c69ee54c4b79ede 100644 (file)
@@ -23,6 +23,7 @@ PKG_BUILD_DEPENDS:= \
        PACKAGE_kmod-mac80211:mac80211 \
 
 PKG_CONFIG_DEPENDS:= \
        PACKAGE_kmod-mac80211:mac80211 \
 
 PKG_CONFIG_DEPENDS:= \
+       CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \
        CONFIG_PACKAGE_kmod-ath9k \
        CONFIG_PACKAGE_kmod-mac80211 \
        CONFIG_PACKAGE_kmod-madwifi \
        CONFIG_PACKAGE_kmod-ath9k \
        CONFIG_PACKAGE_kmod-mac80211 \
        CONFIG_PACKAGE_kmod-madwifi \
@@ -30,6 +31,21 @@ PKG_CONFIG_DEPENDS:= \
        CONFIG_PACKAGE_hostapd-mini \
        CONFIG_PACKAGE_kmod-hostap
 
        CONFIG_PACKAGE_hostapd-mini \
        CONFIG_PACKAGE_kmod-hostap
 
+LOCAL_TYPE=$(strip \
+               $(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
+               $(if $(findstring supplicant,$(BUILD_VARIANT)),supplicant, \
+               hostapd \
+       )))
+LOCAL_VARIANT=$(patsubst wpad-%,%,$(patsubst supplicant-%,%,$(BUILD_VARIANT)))
+
+ifeq ($(LOCAL_TYPE),supplicant)
+  ifeq ($(LOCAL_VARIANT),full)
+    PKG_CONFIG_DEPENDS += \
+               CONFIG_WPA_SUPPLICANT_INTERNAL \
+               CONFIG_WPA_SUPPLICANT_OPENSSL
+  endif
+endif
+
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 
 include $(INCLUDE_DIR)/package.mk
@@ -38,8 +54,21 @@ DRIVER_MAKEOPTS= \
        CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \
        CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \
        CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
        CONFIG_DRIVER_NL80211=$(CONFIG_PACKAGE_kmod-mac80211) \
        CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \
        CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
+       CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch) \
        CONFIG_IEEE80211N=$(CONFIG_PACKAGE_kmod-ath9k)
 
        CONFIG_IEEE80211N=$(CONFIG_PACKAGE_kmod-ath9k)
 
+ifeq ($(LOCAL_TYPE),supplicant)
+  ifeq ($(LOCAL_VARIANT),full)
+    DRIVER_MAKEOPTS += $(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),CONFIG_TLS=openssl)
+  endif
+endif
+
+ifneq ($(LOCAL_TYPE),hostapd)
+  ifdef CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
+    TARGET_CFLAGS += -DNO_TIMESTAMP_CHECK
+  endif
+endif
+
 define Package/hostapd/Default
   SECTION:=net
   CATEGORY:=Network
 define Package/hostapd/Default
   SECTION:=net
   CATEGORY:=Network
@@ -80,11 +109,79 @@ define Package/hostapd-utils/description
  IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
 endef
 
  IEEE 802.1x/WPA/EAP/RADIUS Authenticator.
 endef
 
+define Package/wpad/Default
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=IEEE 802.1x Authenticator/Supplicant
+  URL:=http://hostap.epitest.fi/
+  DEPENDS:=@!TARGET_avr32 @!TARGET_etrax +PACKAGE_kmod-mac80211:libnl-tiny
+endef
+
+define Package/wpad
+$(call Package/wpad/Default)
+  TITLE+= (full)
+  VARIANT:=wpad-full
+endef
+
+define Package/wpad/description
+ This package contains a full featured IEEE 802.1x/WPA/EAP/RADIUS
+ Authenticator and Supplicant
+endef
+
+define Package/wpad-mini
+$(call Package/wpad/Default)
+  TITLE+= (WPA-PSK only)
+  VARIANT:=wpad-mini
+endef
+
+define Package/wpad-mini/description
+ This package contains a minimal IEEE 802.1x/WPA Authenticator and Supplicant (WPA-PSK only).
+endef
+
+define Package/wpa-supplicant
+  SECTION:=net
+  CATEGORY:=Network
+  TITLE:=WPA Supplicant
+  URL:=http://hostap.epitest.fi/wpa_supplicant/
+  VARIANT:=supplicant-full
+endef
+
+define Package/wpa-supplicant/Description
+  WPA Supplicant
+endef
+
+define Package/wpa-supplicant/config
+       source "$(SOURCE)/Config.in"
+endef
+
+define Package/wpa-supplicant-mini
+  $(Package/wpa-supplicant)
+  TITLE:=WPA Supplicant (minimal version)
+  DEPENDS:=$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),+libopenssl)
+  VARIANT:=supplicant-mini
+endef
+
+define Package/wpa-supplicant-mini/Description
+  WPA Supplicant (minimal version)
+endef
+
+define Package/wpa-cli
+  SECTION:=net
+  CATEGORY:=Network
+  DEPENDS:=wpa-supplicant
+  TITLE:=WPA Supplicant command line interface
+endef
+
+define Package/wpa-cli/Description
+  WPA Supplicant control utility
+endef
+
+
 ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
 ifneq ($(wildcard $(PKG_BUILD_DIR)/.config_*),$(subst .configured_,.config_,$(STAMP_CONFIGURED)))
-  $(warning $(wildcard $(PKG_BUILD_DIR)/.config_*) != $(subst .configured_,.config_,$(STAMP_CONFIGURED)))
   define Build/Configure/rebuild
   define Build/Configure/rebuild
-       $(FIND) $(PKG_BUILD_DIR) -name \*.o | $(XARGS) rm -f
+       $(FIND) $(PKG_BUILD_DIR) -name \*.o -or -name \*.a | $(XARGS) rm -f
        rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
        rm -f $(PKG_BUILD_DIR)/hostapd/hostapd
+       rm -f $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant
        rm -f $(PKG_BUILD_DIR)/.config_*
        touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
   endef
        rm -f $(PKG_BUILD_DIR)/.config_*
        touch $(subst .configured_,.config_,$(STAMP_CONFIGURED))
   endef
@@ -92,7 +189,8 @@ endif
 
 define Build/Configure
        $(Build/Configure/rebuild)
 
 define Build/Configure
        $(Build/Configure/rebuild)
-       $(CP) ./files/$(BUILD_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
+       $(CP) ./files/hostapd-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/hostapd/.config
+       $(CP) ./files/wpa_supplicant-$(LOCAL_VARIANT).config $(PKG_BUILD_DIR)/wpa_supplicant/.config
 endef
 
 TARGET_CPPFLAGS := \
 endef
 
 TARGET_CPPFLAGS := \
@@ -108,30 +206,108 @@ ifdef CONFIG_PACKAGE_kmod-mac80211
   TARGET_LDFLAGS += -lm -lnl-tiny
 endif
 
   TARGET_LDFLAGS += -lm -lnl-tiny
 endif
 
-define Build/Compile
+define Build/RunMake
        CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
        CFLAGS="$(TARGET_CPPFLAGS) $(TARGET_CFLAGS)" \
-       $(MAKE) -C $(PKG_BUILD_DIR)/hostapd \
+       $(MAKE) -C $(PKG_BUILD_DIR)/$(1) \
                $(TARGET_CONFIGURE_OPTS) \
                $(DRIVER_MAKEOPTS) \
                LIBS="$(TARGET_LDFLAGS)" \
                $(TARGET_CONFIGURE_OPTS) \
                $(DRIVER_MAKEOPTS) \
                LIBS="$(TARGET_LDFLAGS)" \
-               hostapd hostapd_cli
+               $(2)
 endef
 
 endef
 
-define Package/hostapd/install
+define Build/Compile/wpad
+       echo ` \
+               $(call Build/RunMake,hostapd,MULTICALL=1 dump_cflags); \
+               $(call Build/RunMake,wpa_supplicant,dump_cflags) | sed -e 's,$(TARGET_CFLAGS),,' \
+       ` > $(PKG_BUILD_DIR)/.cflags
+       $(call Build/RunMake,hostapd, \
+               CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
+               MULTICALL=1 \
+               hostapd_cli hostapd_multi.a \
+       )
+       $(call Build/RunMake,wpa_supplicant, \
+               CFLAGS="$$$$(cat $(PKG_BUILD_DIR)/.cflags)" \
+               MULTICALL=1 \
+               wpa_cli wpa_supplicant_multi.a \
+       )
+       $(TARGET_CC) -o $(PKG_BUILD_DIR)/wpad \
+               $(TARGET_CFLAGS) \
+               ./files/multicall.c \
+               $(PKG_BUILD_DIR)/hostapd/hostapd_multi.a \
+               $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant_multi.a \
+               $(TARGET_LDFLAGS)
+endef
+
+define Build/Compile/hostapd
+       $(call Build/RunMake,hostapd, \
+               hostapd hostapd_cli \
+       )
+endef
+
+define Build/Compile/supplicant
+       $(call Build/RunMake,wpa_supplicant, \
+               wpa_cli wpa_supplicant \
+       )
+endef
+
+define Build/Compile
+       $(Build/Compile/$(LOCAL_TYPE))
+endef
+
+define Install/hostapd
        $(INSTALL_DIR) $(1)/etc/hotplug.d/net
        $(INSTALL_DATA) ./files/hostapd.hotplug $(1)/etc/hotplug.d/net/
        $(INSTALL_DIR) $(1)/lib/wifi
        $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
        $(INSTALL_DIR) $(1)/usr/sbin
        $(INSTALL_DIR) $(1)/etc/hotplug.d/net
        $(INSTALL_DATA) ./files/hostapd.hotplug $(1)/etc/hotplug.d/net/
        $(INSTALL_DIR) $(1)/lib/wifi
        $(INSTALL_DATA) ./files/hostapd.sh $(1)/lib/wifi/hostapd.sh
        $(INSTALL_DIR) $(1)/usr/sbin
+endef
+
+define Install/supplicant
+       $(INSTALL_DIR) $(1)/lib/wifi
+       $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
+       $(INSTALL_DIR) $(1)/usr/sbin
+endef
+
+define Package/hostapd/install
+       $(call Install/hostapd,$(1))
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
 endef
 Package/hostapd-mini/install = $(Package/hostapd/install)
 
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd $(1)/usr/sbin/
 endef
 Package/hostapd-mini/install = $(Package/hostapd/install)
 
-define Package/hostapd-utils/install
+ifneq ($(LOCAL_TYPE),supplicant)
+  define Package/hostapd-utils/install
        $(INSTALL_DIR) $(1)/usr/sbin
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
        $(INSTALL_DIR) $(1)/usr/sbin
        $(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
+  endef
+endif
+
+define Package/wpad/install
+       $(call Install/hostapd,$(1))
+       $(call Install/supplicant,$(1))
+       $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpad $(1)/usr/sbin/
+       ln -sf wpad $(1)/usr/sbin/hostapd
+       ln -sf wpad $(1)/usr/sbin/wpa_supplicant
+endef
+Package/wpad-mini/install = $(Package/wpad/install)
+
+define Package/wpa-supplicant/install
+       $(call Install/supplicant,$(1))
+       $(INSTALL_BIN) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant $(1)/usr/sbin/
 endef
 endef
+Package/wpa-supplicant-mini/install = $(Package/wpa-supplicant/install)
+
+ifneq ($(LOCAL_VARIANT),hostapd)
+  define Package/wpa-cli/install
+       $(INSTALL_DIR) $(1)/usr/sbin
+       $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
+  endef
+endif
 
 $(eval $(call BuildPackage,hostapd))
 $(eval $(call BuildPackage,hostapd-mini))
 
 $(eval $(call BuildPackage,hostapd))
 $(eval $(call BuildPackage,hostapd-mini))
+$(eval $(call BuildPackage,wpad))
+$(eval $(call BuildPackage,wpad-mini))
+$(eval $(call BuildPackage,wpa-supplicant))
+$(eval $(call BuildPackage,wpa-supplicant-mini))
+$(eval $(call BuildPackage,wpa-cli))
 $(eval $(call BuildPackage,hostapd-utils))
 $(eval $(call BuildPackage,hostapd-utils))
diff --git a/package/hostapd/files/full.config b/package/hostapd/files/full.config
deleted file mode 100644 (file)
index 07c924f..0000000
+++ /dev/null
@@ -1,158 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove support for RADIUS accounting
-#CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-#CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-CONFIG_TLS=internal
-CONFIG_INTERNAL_LIBTOMMATH=y
-CONFIG_INTERNAL_AES=y
-NEED_AES_DEC=y
diff --git a/package/hostapd/files/hostapd-full.config b/package/hostapd/files/hostapd-full.config
new file mode 100644 (file)
index 0000000..07c924f
--- /dev/null
@@ -0,0 +1,158 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove support for RADIUS accounting
+#CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+#CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+CONFIG_TLS=internal
+CONFIG_INTERNAL_LIBTOMMATH=y
+CONFIG_INTERNAL_AES=y
+NEED_AES_DEC=y
diff --git a/package/hostapd/files/hostapd-mini.config b/package/hostapd/files/hostapd-mini.config
new file mode 100644 (file)
index 0000000..1720ddd
--- /dev/null
@@ -0,0 +1,155 @@
+# Example hostapd build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cass, these lines should use += in order not
+# to override previous values of the variables.
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for wired authenticator
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for madwifi driver
+CONFIG_DRIVER_MADWIFI=y
+#CFLAGS += -I../../madwifi # change to the madwifi source directory
+
+# Driver interface for Prism54 driver
+#CONFIG_DRIVER_PRISM54=y
+
+# Driver interface for drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
+# shipped with your distribution yet. If that is the case, you need to build
+# newer libnl version and point the hostapd build to use it.
+#LIBNL=/usr/src/libnl
+#CFLAGS += -I$(LIBNL)/include
+#LIBS += -L$(LIBNL)/lib
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+
+# Driver interface for no driver (e.g., RADIUS server only)
+#CONFIG_DRIVER_NONE=y
+
+# IEEE 802.11F/IAPP
+# CONFIG_IAPP=y
+
+# WPA2/IEEE 802.11i RSN pre-authentication
+CONFIG_RSN_PREAUTH=y
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Integrated EAP server
+#CONFIG_EAP=y
+
+# EAP-MD5 for the integrated EAP server
+#CONFIG_EAP_MD5=y
+
+# EAP-TLS for the integrated EAP server
+#CONFIG_EAP_TLS=y
+
+# EAP-MSCHAPv2 for the integrated EAP server
+#CONFIG_EAP_MSCHAPV2=y
+
+# EAP-PEAP for the integrated EAP server
+#CONFIG_EAP_PEAP=y
+
+# EAP-GTC for the integrated EAP server
+#CONFIG_EAP_GTC=y
+
+# EAP-TTLS for the integrated EAP server
+#CONFIG_EAP_TTLS=y
+
+# EAP-SIM for the integrated EAP server
+#CONFIG_EAP_SIM=y
+
+# EAP-AKA for the integrated EAP server
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' for the integrated EAP server
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# EAP-PAX for the integrated EAP server
+#CONFIG_EAP_PAX=y
+
+# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-SAKE for the integrated EAP server
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK for the integrated EAP server
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-FAST for the integrated EAP server
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+# Enable UPnP support for external WPS Registrars
+#CONFIG_WPS_UPNP=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# Trusted Network Connect (EAP-TNC)
+#CONFIG_EAP_TNC=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+#CONFIG_PKCS12=y
+
+# RADIUS authentication server. This provides access to the integrated EAP
+# server from external hosts using RADIUS.
+#CONFIG_RADIUS_SERVER=y
+
+# Build IPv6 support for RADIUS operations
+#CONFIG_IPV6=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Use the hostapd's IEEE 802.11 authentication (ACL), but without
+# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
+#CONFIG_DRIVER_RADIUS_ACL=y
+
+# IEEE 802.11n (High Throughput) support
+CONFIG_IEEE80211N=y
+
+# Remove debugging code that is printing out debug messages to stdout.
+# This can be used to reduce the size of the hostapd considerably if debugging
+# code is not needed.
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove support for RADIUS accounting
+CONFIG_NO_ACCOUNTING=y
+
+# Remove support for RADIUS
+CONFIG_NO_RADIUS=y
+
+# Remove support for VLANs
+#CONFIG_NO_VLAN=y
+
+CONFIG_TLS=internal
diff --git a/package/hostapd/files/mini.config b/package/hostapd/files/mini.config
deleted file mode 100644 (file)
index 1720ddd..0000000
+++ /dev/null
@@ -1,155 +0,0 @@
-# Example hostapd build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cass, these lines should use += in order not
-# to override previous values of the variables.
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for wired authenticator
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-#CFLAGS += -I../../madwifi # change to the madwifi source directory
-
-# Driver interface for Prism54 driver
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for drivers using the nl80211 kernel interface
-CONFIG_DRIVER_NL80211=y
-# driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
-# shipped with your distribution yet. If that is the case, you need to build
-# newer libnl version and point the hostapd build to use it.
-#LIBNL=/usr/src/libnl
-#CFLAGS += -I$(LIBNL)/include
-#LIBS += -L$(LIBNL)/lib
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for no driver (e.g., RADIUS server only)
-#CONFIG_DRIVER_NONE=y
-
-# IEEE 802.11F/IAPP
-# CONFIG_IAPP=y
-
-# WPA2/IEEE 802.11i RSN pre-authentication
-CONFIG_RSN_PREAUTH=y
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Integrated EAP server
-#CONFIG_EAP=y
-
-# EAP-MD5 for the integrated EAP server
-#CONFIG_EAP_MD5=y
-
-# EAP-TLS for the integrated EAP server
-#CONFIG_EAP_TLS=y
-
-# EAP-MSCHAPv2 for the integrated EAP server
-#CONFIG_EAP_MSCHAPV2=y
-
-# EAP-PEAP for the integrated EAP server
-#CONFIG_EAP_PEAP=y
-
-# EAP-GTC for the integrated EAP server
-#CONFIG_EAP_GTC=y
-
-# EAP-TTLS for the integrated EAP server
-#CONFIG_EAP_TTLS=y
-
-# EAP-SIM for the integrated EAP server
-#CONFIG_EAP_SIM=y
-
-# EAP-AKA for the integrated EAP server
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' for the integrated EAP server
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# EAP-PAX for the integrated EAP server
-#CONFIG_EAP_PAX=y
-
-# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-SAKE for the integrated EAP server
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK for the integrated EAP server
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-FAST for the integrated EAP server
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-# Enable UPnP support for external WPS Registrars
-#CONFIG_WPS_UPNP=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# Trusted Network Connect (EAP-TNC)
-#CONFIG_EAP_TNC=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-#CONFIG_PKCS12=y
-
-# RADIUS authentication server. This provides access to the integrated EAP
-# server from external hosts using RADIUS.
-#CONFIG_RADIUS_SERVER=y
-
-# Build IPv6 support for RADIUS operations
-#CONFIG_IPV6=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Use the hostapd's IEEE 802.11 authentication (ACL), but without
-# the IEEE 802.11 Management capability (e.g., madwifi or FreeBSD/net80211)
-#CONFIG_DRIVER_RADIUS_ACL=y
-
-# IEEE 802.11n (High Throughput) support
-CONFIG_IEEE80211N=y
-
-# Remove debugging code that is printing out debug messages to stdout.
-# This can be used to reduce the size of the hostapd considerably if debugging
-# code is not needed.
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove support for RADIUS accounting
-CONFIG_NO_ACCOUNTING=y
-
-# Remove support for RADIUS
-CONFIG_NO_RADIUS=y
-
-# Remove support for VLANs
-#CONFIG_NO_VLAN=y
-
-CONFIG_TLS=internal
diff --git a/package/hostapd/files/multicall.c b/package/hostapd/files/multicall.c
new file mode 100644 (file)
index 0000000..c8e814b
--- /dev/null
@@ -0,0 +1,28 @@
+#include <stdio.h>
+#include <string.h>
+#include <stdbool.h>
+
+extern int hostapd_main(int argc, char **argv);
+extern int wpa_supplicant_main(int argc, char **argv);
+
+int main(int argc, char **argv)
+{
+       bool restart = false;
+       const char *prog = argv[0];
+
+restart:
+       if (strstr(argv[0], "hostapd"))
+               return hostapd_main(argc, argv);
+       else if (strstr(argv[0], "wpa_supplicant"))
+               return wpa_supplicant_main(argc, argv);
+
+       if (!restart && argc > 1) {
+               argv++;
+               argc--;
+               restart = true;
+               goto restart;
+       }
+
+       fprintf(stderr, "Invalid command.\nUsage: %s wpa_supplicant|hostapd [<arguments>]\n", prog);
+       return 255;
+}
diff --git a/package/hostapd/files/wpa_supplicant-full.config b/package/hostapd/files/wpa_supplicant-full.config
new file mode 100644 (file)
index 0000000..5e7fd27
--- /dev/null
@@ -0,0 +1,404 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#      -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+CONFIG_EAP_GTC=y
+
+# EAP-OTP
+CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#      path is given on command line, not here; this option is just used to
+#      select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
diff --git a/package/hostapd/files/wpa_supplicant-mini.config b/package/hostapd/files/wpa_supplicant-mini.config
new file mode 100644 (file)
index 0000000..843b64a
--- /dev/null
@@ -0,0 +1,404 @@
+# Example wpa_supplicant build time configuration
+#
+# This file lists the configuration options that are used when building the
+# hostapd binary. All lines starting with # are ignored. Configuration option
+# lines must be commented out complete, if they are not to be included, i.e.,
+# just setting VARIABLE=n is not disabling that variable.
+#
+# This file is included in Makefile, so variables like CFLAGS and LIBS can also
+# be modified from here. In most cases, these lines should use += in order not
+# to override previous values of the variables.
+
+
+# Uncomment following two lines and fix the paths if you have installed OpenSSL
+# or GnuTLS in non-default location
+#CFLAGS += -I/usr/local/openssl/include
+#LIBS += -L/usr/local/openssl/lib
+
+# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
+# the kerberos files are not in the default include path. Following line can be
+# used to fix build issues on such systems (krb5.h not found).
+#CFLAGS += -I/usr/include/kerberos
+
+# Example configuration for various cross-compilation platforms
+
+#### sveasoft (e.g., for Linksys WRT54G) ######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
+#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
+###############################################################################
+
+#### openwrt (e.g., for Linksys WRT54G) #######################################
+#CC=mipsel-uclibc-gcc
+#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
+#CFLAGS += -Os
+#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
+#      -I../WRT54GS/release/src/include
+#LIBS = -lssl
+###############################################################################
+
+
+# Driver interface for Host AP driver
+CONFIG_DRIVER_HOSTAP=y
+
+# Driver interface for Agere driver
+#CONFIG_DRIVER_HERMES=y
+# Change include directories to match with the local setup
+#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
+#CFLAGS += -I../../include/wireless
+
+# Driver interface for madwifi driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_MADWIFI=y
+# Set include directory to the madwifi source tree
+#CFLAGS += -I../../madwifi
+
+# Driver interface for ndiswrapper
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_NDISWRAPPER=y
+
+# Driver interface for Atmel driver
+# CONFIG_DRIVER_ATMEL=y
+
+# Driver interface for old Broadcom driver
+# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
+# Linux wireless extensions and does not need (or even work) with the old
+# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
+#CONFIG_DRIVER_BROADCOM=y
+# Example path for wlioctl.h; change to match your configuration
+#CFLAGS += -I/opt/WRT54GS/release/src/include
+
+# Driver interface for Intel ipw2100/2200 driver
+# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
+#CONFIG_DRIVER_IPW=y
+
+# Driver interface for Ralink driver
+#CONFIG_DRIVER_RALINK=y
+
+# Driver interface for generic Linux wireless extensions
+CONFIG_DRIVER_WEXT=y
+
+# Driver interface for Linux drivers using the nl80211 kernel interface
+CONFIG_DRIVER_NL80211=y
+
+# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
+#CONFIG_DRIVER_BSD=y
+#CFLAGS += -I/usr/local/include
+#LIBS += -L/usr/local/lib
+#LIBS_p += -L/usr/local/lib
+#LIBS_c += -L/usr/local/lib
+
+# Driver interface for Windows NDIS
+#CONFIG_DRIVER_NDIS=y
+#CFLAGS += -I/usr/include/w32api/ddk
+#LIBS += -L/usr/local/lib
+# For native build using mingw
+#CONFIG_NATIVE_WINDOWS=y
+# Additional directories for cross-compilation on Linux host for mingw target
+#CFLAGS += -I/opt/mingw/mingw32/include/ddk
+#LIBS += -L/opt/mingw/mingw32/lib
+#CC=mingw32-gcc
+# By default, driver_ndis uses WinPcap for low-level operations. This can be
+# replaced with the following option which replaces WinPcap calls with NDISUIO.
+# However, this requires that WZC is disabled (net stop wzcsvc) before starting
+# wpa_supplicant.
+# CONFIG_USE_NDISUIO=y
+
+# Driver interface for development testing
+#CONFIG_DRIVER_TEST=y
+
+# Include client MLME (management frame processing) for test driver
+# This can be used to test MLME operations in hostapd with the test interface.
+# space.
+#CONFIG_CLIENT_MLME=y
+
+# Driver interface for wired Ethernet drivers
+CONFIG_DRIVER_WIRED=y
+
+# Driver interface for the Broadcom RoboSwitch family
+#CONFIG_DRIVER_ROBOSWITCH=y
+
+# Driver interface for no driver (e.g., WPS ER only)
+#CONFIG_DRIVER_NONE=y
+
+# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
+# included)
+# CONFIG_IEEE8021X_EAPOL=y
+
+# EAP-MD5
+# CONFIG_EAP_MD5=y
+
+# EAP-MSCHAPv2
+# CONFIG_EAP_MSCHAPV2=y
+
+# EAP-TLS
+# CONFIG_EAP_TLS=y
+
+# EAL-PEAP
+# CONFIG_EAP_PEAP=y
+
+# EAP-TTLS
+# CONFIG_EAP_TTLS=y
+
+# EAP-FAST
+# Note: Default OpenSSL package does not include support for all the
+# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
+# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
+# to add the needed functions.
+#CONFIG_EAP_FAST=y
+
+# EAP-GTC
+# CONFIG_EAP_GTC=y
+
+# EAP-OTP
+# CONFIG_EAP_OTP=y
+
+# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
+#CONFIG_EAP_SIM=y
+
+# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
+#CONFIG_EAP_PSK=y
+
+# EAP-PAX
+#CONFIG_EAP_PAX=y
+
+# LEAP
+# CONFIG_EAP_LEAP=y
+
+# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
+#CONFIG_EAP_AKA=y
+
+# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
+# This requires CONFIG_EAP_AKA to be enabled, too.
+#CONFIG_EAP_AKA_PRIME=y
+
+# Enable USIM simulator (Milenage) for EAP-AKA
+#CONFIG_USIM_SIMULATOR=y
+
+# EAP-SAKE
+#CONFIG_EAP_SAKE=y
+
+# EAP-GPSK
+#CONFIG_EAP_GPSK=y
+# Include support for optional SHA256 cipher suite in EAP-GPSK
+#CONFIG_EAP_GPSK_SHA256=y
+
+# EAP-TNC and related Trusted Network Connect support (experimental)
+#CONFIG_EAP_TNC=y
+
+# Wi-Fi Protected Setup (WPS)
+#CONFIG_WPS=y
+
+# EAP-IKEv2
+#CONFIG_EAP_IKEV2=y
+
+# PKCS#12 (PFX) support (used to read private key and certificate file from
+# a file that usually has extension .p12 or .pfx)
+# CONFIG_PKCS12=y
+
+# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
+# engine.
+# CONFIG_SMARTCARD=y
+
+# PC/SC interface for smartcards (USIM, GSM SIM)
+# Enable this if EAP-SIM or EAP-AKA is included
+#CONFIG_PCSC=y
+
+# Development testing
+#CONFIG_EAPOL_TEST=y
+
+# Select control interface backend for external programs, e.g, wpa_cli:
+# unix = UNIX domain sockets (default for Linux/*BSD)
+# udp = UDP sockets using localhost (127.0.0.1)
+# named_pipe = Windows Named Pipe (default for Windows)
+# y = use default (backwards compatibility)
+# If this option is commented out, control interface is not included in the
+# build.
+CONFIG_CTRL_IFACE=y
+
+# Include support for GNU Readline and History Libraries in wpa_cli.
+# When building a wpa_cli binary for distribution, please note that these
+# libraries are licensed under GPL and as such, BSD license may not apply for
+# the resulting binary.
+#CONFIG_READLINE=y
+
+# Remove debugging code that is printing out debug message to stdout.
+# This can be used to reduce the size of the wpa_supplicant considerably
+# if debugging code is not needed. The size reduction can be around 35%
+# (e.g., 90 kB).
+#CONFIG_NO_STDOUT_DEBUG=y
+
+# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
+# 35-50 kB in code size.
+#CONFIG_NO_WPA=y
+
+# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
+# save about 1 kB in code size when building only WPA-Personal (no EAP support)
+# or 6 kB if building for WPA-Enterprise.
+#CONFIG_NO_WPA2=y
+
+# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
+# This option can be used to reduce code size by removing support for
+# converting ASCII passphrases into PSK. If this functionality is removed, the
+# PSK can only be configured as the 64-octet hexstring (e.g., from
+# wpa_passphrase). This saves about 0.5 kB in code size.
+#CONFIG_NO_WPA_PASSPHRASE=y
+
+# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
+# This can be used if ap_scan=1 mode is never enabled.
+#CONFIG_NO_SCAN_PROCESSING=y
+
+# Select configuration backend:
+# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
+#      path is given on command line, not here; this option is just used to
+#      select the backend that allows configuration files to be used)
+# winreg = Windows registry (see win_example.reg for an example)
+CONFIG_BACKEND=file
+
+# Remove configuration write functionality (i.e., to allow the configuration
+# file to be updated based on runtime configuration changes). The runtime
+# configuration can still be changed, the changes are just not going to be
+# persistent over restarts. This option can be used to reduce code size by
+# about 3.5 kB.
+#CONFIG_NO_CONFIG_WRITE=y
+
+# Remove support for configuration blobs to reduce code size by about 1.5 kB.
+#CONFIG_NO_CONFIG_BLOBS=y
+
+# Select program entry point implementation:
+# main = UNIX/POSIX like main() function (default)
+# main_winsvc = Windows service (read parameters from registry)
+# main_none = Very basic example (development use only)
+#CONFIG_MAIN=main
+
+# Select wrapper for operatins system and C library specific functions
+# unix = UNIX/POSIX like systems (default)
+# win32 = Windows systems
+# none = Empty template
+#CONFIG_OS=unix
+
+# Select event loop implementation
+# eloop = select() loop (default)
+# eloop_win = Windows events and WaitForMultipleObject() loop
+# eloop_none = Empty template
+#CONFIG_ELOOP=eloop
+
+# Select layer 2 packet implementation
+# linux = Linux packet socket (default)
+# pcap = libpcap/libdnet/WinPcap
+# freebsd = FreeBSD libpcap
+# winpcap = WinPcap with receive thread
+# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
+# none = Empty template
+#CONFIG_L2_PACKET=linux
+
+# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
+# CONFIG_PEERKEY=y
+
+# IEEE 802.11w (management frame protection)
+# This version is an experimental implementation based on IEEE 802.11w/D1.0
+# draft and is subject to change since the standard has not yet been finalized.
+# Driver support is also needed for IEEE 802.11w.
+#CONFIG_IEEE80211W=y
+
+# Select TLS implementation
+# openssl = OpenSSL (default)
+# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
+# internal = Internal TLSv1 implementation (experimental)
+# none = Empty template
+CONFIG_TLS=internal
+
+# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
+# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
+# even though the core GnuTLS library is released under LGPL, this extra
+# library uses GPL and as such, the terms of GPL apply to the combination
+# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
+# apply for distribution of the resulting binary.
+#CONFIG_GNUTLS_EXTRA=y
+
+# If CONFIG_TLS=internal is used, additional library and include paths are
+# needed for LibTomMath. Alternatively, an integrated, minimal version of
+# LibTomMath can be used. See beginning of libtommath.c for details on benefits
+# and drawbacks of this option.
+#CONFIG_INTERNAL_LIBTOMMATH=y
+#ifndef CONFIG_INTERNAL_LIBTOMMATH
+#LTM_PATH=/usr/src/libtommath-0.39
+#CFLAGS += -I$(LTM_PATH)
+#LIBS += -L$(LTM_PATH)
+#LIBS_p += -L$(LTM_PATH)
+#endif
+# At the cost of about 4 kB of additional binary size, the internal LibTomMath
+# can be configured to include faster routines for exptmod, sqr, and div to
+# speed up DH and RSA calculation considerably
+#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
+
+# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
+# This is only for Windows builds and requires WMI-related header files and
+# WbemUuid.Lib from Platform SDK even when building with MinGW.
+#CONFIG_NDIS_EVENTS_INTEGRATED=y
+#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
+
+# Add support for old DBus control interface
+# (fi.epitest.hostap.WPASupplicant)
+#CONFIG_CTRL_IFACE_DBUS=y
+
+# Add support for new DBus control interface
+# (fi.w1.hostap.wpa_supplicant1)
+#CONFIG_CTRL_IFACE_DBUS_NEW=y
+
+# Add introspection support for new DBus control interface
+#CONFIG_CTRL_IFACE_DBUS_INTRO=y
+
+# Add support for loading EAP methods dynamically as shared libraries.
+# When this option is enabled, each EAP method can be either included
+# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
+# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
+# be loaded in the beginning of the wpa_supplicant configuration file
+# (see load_dynamic_eap parameter in the example file) before being used in
+# the network blocks.
+#
+# Note that some shared parts of EAP methods are included in the main program
+# and in order to be able to use dynamic EAP methods using these parts, the
+# main program must have been build with the EAP method enabled (=y or =dyn).
+# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
+# unless at least one of them was included in the main build to force inclusion
+# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
+# in the main build to be able to load these methods dynamically.
+#
+# Please also note that using dynamic libraries will increase the total binary
+# size. Thus, it may not be the best option for targets that have limited
+# amount of memory/flash.
+#CONFIG_DYNAMIC_EAP_METHODS=y
+
+# IEEE Std 802.11r-2008 (Fast BSS Transition)
+#CONFIG_IEEE80211R=y
+
+# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
+#CONFIG_DEBUG_FILE=y
+
+# Enable privilege separation (see README 'Privilege separation' for details)
+#CONFIG_PRIVSEP=y
+
+# Enable mitigation against certain attacks against TKIP by delaying Michael
+# MIC error reports by a random amount of time between 0 and 60 seconds
+#CONFIG_DELAYED_MIC_ERROR_REPORT=y
+
+# Enable tracing code for developer debugging
+# This tracks use of memory allocations and other registrations and reports
+# incorrect use with a backtrace of call (or allocation) location.
+#CONFIG_WPA_TRACE=y
+# For BSD, comment out these.
+#LIBS += -lexecinfo
+#LIBS_p += -lexecinfo
+#LIBS_c += -lexecinfo
+
+# Use libbfd to get more details for developer debugging
+# This enables use of libbfd to get more detailed symbols for the backtraces
+# generated by CONFIG_WPA_TRACE=y.
+#CONFIG_WPA_TRACE_BFD=y
+# For BSD, comment out these.
+#LIBS += -lbfd -liberty -lz
+#LIBS_p += -lbfd -liberty -lz
+#LIBS_c += -lbfd -liberty -lz
diff --git a/package/hostapd/files/wpa_supplicant.sh b/package/hostapd/files/wpa_supplicant.sh
new file mode 100644 (file)
index 0000000..8f7f503
--- /dev/null
@@ -0,0 +1,117 @@
+wpa_supplicant_setup_vif() {
+       local vif="$1"
+       local driver="$2"
+       local key="$key"
+
+       # wpa_supplicant should use wext for mac80211 cards
+       [ "$driver" = "mac80211" ] && driver='wext'
+
+       # make sure we have the psk
+       [ -n "$key" ] || {
+               config_get key "$vif" key
+       }
+
+       case "$enc" in
+               *wep*)
+                       key_mgmt='NONE'
+                       config_get key "$vif" key
+                       key="${key:-1}"
+                       case "$key" in
+                               [1234])
+                                       for idx in 1 2 3 4; do
+                                               local zidx
+                                               zidx=$(($idx - 1))
+                                               config_get ckey "$vif" "key${idx}"
+                                               [ -n "$ckey" ] && \
+                                                       append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
+                                       done
+                                       wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
+                               ;;
+                               *)
+                                       wep_key0="wep_key0=$(prepare_key_wep "$key")"
+                                       wep_tx_keyidx="wep_tx_keyidx=0"
+                               ;;
+                       esac
+               ;;
+               *psk*)
+                       key_mgmt='WPA-PSK'
+                       config_get_bool usepassphrase "$vif" passphrase 1
+                       case "$enc" in
+                               *psk2*)
+                                       proto='proto=RSN'
+                                       if [ "$usepassphrase" = "1" ]; then
+                                               passphrase="psk=\"${key}\""
+                                       else
+                                               passphrase="psk=${key}"
+                                       fi
+                               ;;
+                               *psk*)
+                                       proto='proto=WPA'
+                                       if [ "$usepassphrase" = "1" ]; then
+                                               passphrase="psk=\"${key}\""
+                                       else
+                                               passphrase="psk=${key}"
+                                       fi
+                               ;;
+                       esac
+               ;;
+               *wpa*|*8021x*)
+                       proto='proto=WPA2'
+                       key_mgmt='WPA-EAP'
+                       config_get ca_cert "$vif" ca_cert
+                       ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
+                       case "$eap_type" in
+                               tls)
+                                       pairwise='pairwise=CCMP'
+                                       group='group=CCMP'
+                                       config_get priv_key "$vif" priv_key
+                                       config_get priv_key_pwd "$vif" priv_key_pwd
+                                       priv_key="private_key=\"$priv_key\""
+                                       priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
+                               ;;
+                               peap|ttls)
+                                       config_get auth "$vif" auth
+                                       config_get identity "$vif" identity
+                                       config_get password "$vif" password
+                                       phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
+                                       identity="identity=\"$identity\""
+                                       password="password=\"$password\""
+                               ;;
+                       esac
+                       eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
+               ;;
+       esac
+       config_get ifname "$vif" ifname
+       config_get bridge "$vif" bridge
+       config_get ssid "$vif" ssid
+       config_get bssid "$vif" bssid
+       bssid=${bssid:+"bssid=$bssid"}
+       rm -rf /var/run/wpa_supplicant-$ifname
+       cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
+ctrl_interface=/var/run/wpa_supplicant-$ifname
+network={
+       scan_ssid=1
+       ssid="$ssid"
+       $bssid
+       key_mgmt=$key_mgmt
+       $proto
+       $passphrase
+       $pairwise
+       $group
+       $eap_type
+       $ca_cert
+       $priv_key
+       $priv_key_pwd
+       $phase2
+       $identity
+       $password
+       $wep_key0
+       $wep_key1
+       $wep_key2
+       $wep_key3
+       $wep_tx_keyidx
+}
+EOF
+       [ -z "$proto" -a "$key_mgmt" != "NONE" ] || \
+               wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
+}
diff --git a/package/hostapd/patches/200-multicall.patch b/package/hostapd/patches/200-multicall.patch
new file mode 100644 (file)
index 0000000..fbbba20
--- /dev/null
@@ -0,0 +1,236 @@
+--- a/hostapd/Makefile
++++ b/hostapd/Makefile
+@@ -14,6 +14,7 @@ CFLAGS += -I../src/utils
+ # CFLAGS += -DUSE_KERNEL_HEADERS -I/usr/src/linux/include
+ -include .config
++-include $(if $(MULTICALL), ../wpa_supplicant/.config)
+ ifndef CONFIG_OS
+ ifdef CONFIG_NATIVE_WINDOWS
+@@ -157,10 +158,14 @@ ifdef CONFIG_IEEE80211N
+ CFLAGS += -DCONFIG_IEEE80211N
+ endif
++ifndef MULTICALL
++CFLAGS += -DNO_SUPPLICANT
++endif
++
+ include ../src/drivers/drivers.mak
+-OBJS += $(DRV_AP_OBJS)
+-CFLAGS += $(DRV_AP_CFLAGS)
+-LDFLAGS += $(DRV_AP_LDFLAGS)
++OBJS += $(sort $(DRV_AP_OBJS) $(if $(MULTICALL),$(DRV_WPA_OBJS)))
++CFLAGS += $(DRV_AP_CFLAGS) $(if $(MULTICALL),$(DRV_WPA_CFLAGS))
++LDFLAGS += $(DRV_AP_LDFLAGS) $(if $(MULTICALL),$(DRV_WPA_LDFLAGS))
+ LIBS += $(DRV_AP_LIBS)
+ ifdef CONFIG_L2_PACKET
+@@ -738,6 +743,12 @@ install: all
+ BCHECK=../src/drivers/build.hostapd
++hostapd_multi.a: $(BCHECK) $(OBJS)
++      $(Q)$(CC) -c -o hostapd_multi.o -Dmain=hostapd_main $(CFLAGS) main.c
++      @$(E) "  CC " $<
++      @rm -f $@
++      @$(AR) cr $@ hostapd_multi.o $(OBJS)
++
+ hostapd: $(BCHECK) $(OBJS)
+       $(CC) $(LDFLAGS) -o hostapd $(OBJS) $(LIBS)
+@@ -776,6 +787,12 @@ HOBJS += ../src/crypto/aes-internal.o
+ HOBJS += ../src/crypto/aes-internal-enc.o
+ endif
++dump_cflags:
++      @echo -n $(CFLAGS) " "
++
++dump_ldflags:
++      @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " "
++
+ nt_password_hash: $(NOBJS)
+       $(CC) $(LDFLAGS) -o nt_password_hash $(NOBJS) $(LIBS_n)
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -52,6 +52,7 @@ OBJS_p += ../src/utils/wpabuf.o
+ OBJS_c = wpa_cli.o ../src/common/wpa_ctrl.o
+ -include .config
++-include $(if $(MULTICALL),../hostapd/.config)
+ ifndef CONFIG_OS
+ ifdef CONFIG_NATIVE_WINDOWS
+@@ -579,6 +580,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
+ CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
+ LIBS += -ldl -rdynamic
+ endif
++else
++  ifdef MULTICALL
++    OBJS += ../src/eap_common/eap_common.o
++  endif
+ endif
+ ifdef CONFIG_AP
+@@ -631,6 +636,12 @@ CFLAGS += -DEAP_SERVER_WSC
+ OBJS += ../src/ap/wps_hostapd.o
+ OBJS += ../src/eap_server/eap_wsc.o
+ endif
++else
++  ifdef MULTICALL
++    OBJS += ../src/eap_server/eap.o
++    OBJS += ../src/eap_server/eap_identity.o
++    OBJS += ../src/eap_server/eap_methods.o
++  endif
+ endif
+ ifdef NEED_RSN_AUTHENTICATOR
+@@ -1260,6 +1271,12 @@ BCHECK=../src/drivers/build.wpa_supplica
+ wpa_priv: $(BCHECK) $(OBJS_priv)
+       $(LDO) $(LDFLAGS) -o wpa_priv $(OBJS_priv) $(LIBS)
++wpa_supplicant_multi.a: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
++      $(Q)$(CC) -c -o wpa_supplicant_multi.o -Dmain=wpa_supplicant_main $(CFLAGS) main.c
++      @$(E) "  CC " $<
++      @rm -f $@
++      @$(AR) cr $@ wpa_supplicant_multi.o $(OBJS)
++
+ wpa_supplicant: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
+       $(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
+@@ -1319,6 +1336,12 @@ endif
+       $(Q)$(CC) -c -o $@ $(CFLAGS) $<
+       @$(E) "  CC " $<
++dump_cflags:
++      @echo -n $(CFLAGS) " "
++
++dump_ldflags:
++      @echo -n $(LDFLAGS) $(LIBS) $(EXTRALIBS) " "
++
+ wpa_supplicant.exe: wpa_supplicant
+       mv -f $< $@
+ wpa_cli.exe: wpa_cli
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -2384,8 +2384,8 @@ union wpa_event_data {
+  * Driver wrapper code should call this function whenever an event is received
+  * from the driver.
+  */
+-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
+-                        union wpa_event_data *data);
++extern void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
++                                  union wpa_event_data *data);
+ /*
+--- a/src/ap/drv_callbacks.c
++++ b/src/ap/drv_callbacks.c
+@@ -337,8 +337,8 @@ static void hostapd_event_eapol_rx(struc
+ }
+-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
+-                        union wpa_event_data *data)
++void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
++                     union wpa_event_data *data)
+ {
+       struct hostapd_data *hapd = ctx;
+@@ -415,5 +415,6 @@ void wpa_supplicant_event(void *ctx, enu
+               break;
+       }
+ }
+-
+ #endif /* HOSTAPD */
++
++
+--- a/wpa_supplicant/wpa_priv.c
++++ b/wpa_supplicant/wpa_priv.c
+@@ -825,8 +825,8 @@ static void wpa_priv_send_ft_response(st
+ }
+-void wpa_supplicant_event(void *ctx, wpa_event_type event,
+-                        union wpa_event_data *data)
++static void supplicant_event(void *ctx, wpa_event_type event,
++                           union wpa_event_data *data)
+ {
+       struct wpa_priv_interface *iface = ctx;
+@@ -968,6 +968,7 @@ int main(int argc, char *argv[])
+       if (os_program_init())
+               return -1;
++      wpa_supplicant_event = supplicant_event;
+       wpa_priv_fd_workaround();
+       for (;;) {
+--- a/wpa_supplicant/events.c
++++ b/wpa_supplicant/events.c
+@@ -1425,8 +1425,8 @@ static void wpa_supplicant_event_ibss_rs
+ #endif /* CONFIG_IBSS_RSN */
+-void wpa_supplicant_event(void *ctx, enum wpa_event_type event,
+-                        union wpa_event_data *data)
++void supplicant_event(void *ctx, enum wpa_event_type event,
++                    union wpa_event_data *data)
+ {
+       struct wpa_supplicant *wpa_s = ctx;
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -2215,6 +2215,9 @@ struct wpa_supplicant * wpa_supplicant_g
+       return NULL;
+ }
++extern void supplicant_event(void *ctx, enum wpa_event_type event,
++                           union wpa_event_data *data);
++
+ /**
+  * wpa_supplicant_init - Initialize %wpa_supplicant
+@@ -2233,6 +2236,7 @@ struct wpa_global * wpa_supplicant_init(
+       if (params == NULL)
+               return NULL;
++      wpa_supplicant_event = supplicant_event;
+       wpa_debug_open_file(params->wpa_debug_file_path);
+       if (params->wpa_debug_syslog)
+               wpa_debug_open_syslog();
+--- a/hostapd/main.c
++++ b/hostapd/main.c
+@@ -478,6 +478,9 @@ static void usage(void)
+       exit(1);
+ }
++void hostapd_wpa_event(void *ctx, enum wpa_event_type event,
++                       union wpa_event_data *data);
++
+ int main(int argc, char *argv[])
+ {
+@@ -489,6 +492,7 @@ int main(int argc, char *argv[])
+       if (os_program_init())
+               return -1;
++      wpa_supplicant_event = hostapd_wpa_event;
+       for (;;) {
+               c = getopt(argc, argv, "BdhKP:tv");
+               if (c < 0)
+--- a/src/drivers/drivers.c
++++ b/src/drivers/drivers.c
+@@ -13,7 +13,11 @@
+  */
+ #include "includes.h"
++#include "common.h"
++#include "driver.h"
++void (*wpa_supplicant_event)(void *ctx, enum wpa_event_type event,
++                           union wpa_event_data *data);
+ #ifdef CONFIG_DRIVER_WEXT
+ extern struct wpa_driver_ops wpa_driver_wext_ops; /* driver_wext.c */
diff --git a/package/hostapd/patches/300-timestamp_check.patch b/package/hostapd/patches/300-timestamp_check.patch
new file mode 100644 (file)
index 0000000..fef63e3
--- /dev/null
@@ -0,0 +1,15 @@
+--- a/src/tls/x509v3.c
++++ b/src/tls/x509v3.c
+@@ -1832,8 +1832,11 @@ int x509_certificate_chain_validate(stru
+               if (chain_trusted)
+                       continue;
+-              if ((unsigned long) now.sec <
++              if (
++#ifndef NO_TIMESTAMP_CHECK
++                  (unsigned long) now.sec <
+                   (unsigned long) cert->not_before ||
++#endif
+                   (unsigned long) now.sec >
+                   (unsigned long) cert->not_after) {
+                       wpa_printf(MSG_INFO, "X509: Certificate not valid "
diff --git a/package/hostapd/patches/310-scan_ssid.patch b/package/hostapd/patches/310-scan_ssid.patch
new file mode 100644 (file)
index 0000000..5a7e10f
--- /dev/null
@@ -0,0 +1,37 @@
+--- a/wpa_supplicant/scan.c
++++ b/wpa_supplicant/scan.c
+@@ -215,6 +215,7 @@ static void wpa_supplicant_scan(void *el
+       enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
+ #endif /* CONFIG_WPS */
+       struct wpa_driver_scan_params params;
++      int scan_ssid_all = 1;
+       size_t max_ssids;
+       if (wpa_s->disconnected && !wpa_s->scan_req) {
+@@ -275,6 +276,16 @@ static void wpa_supplicant_scan(void *el
+           wpa_s->wpa_state == WPA_INACTIVE)
+               wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
++      /* check if all configured ssids should be scanned directly */
++      ssid = wpa_s->conf->ssid;
++      while (ssid) {
++              if (!ssid->scan_ssid) {
++                      scan_ssid_all = 0;
++                      break;
++              }
++              ssid = ssid->next;
++      }
++
+       /* Find the starting point from which to continue scanning */
+       ssid = wpa_s->conf->ssid;
+       if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
+@@ -336,6 +347,9 @@ static void wpa_supplicant_scan(void *el
+               int_array_sort_unique(params.freqs);
+       }
++      if (scan_ssid_all && !ssid)
++              ssid = wpa_s->conf->ssid;
++
+       if (ssid) {
+               wpa_s->prev_scan_ssid = ssid;
+               if (max_ssids > 1) {
diff --git a/package/hostapd/patches/320-rescan_immediately.patch b/package/hostapd/patches/320-rescan_immediately.patch
new file mode 100644 (file)
index 0000000..a4020bc
--- /dev/null
@@ -0,0 +1,11 @@
+--- a/wpa_supplicant/events.c
++++ b/wpa_supplicant/events.c
+@@ -843,7 +843,7 @@ static void wpa_supplicant_event_scan_re
+                       wpa_printf(MSG_DEBUG, "Setup a new network");
+                       wpa_supplicant_associate(wpa_s, NULL, ssid);
+               } else
+-                      wpa_supplicant_req_new_scan(wpa_s, 5);
++                      wpa_supplicant_req_new_scan(wpa_s, 0);
+       }
+ }
+ #endif /* CONFIG_NO_SCAN_PROCESSING */
diff --git a/package/hostapd/patches/330-madwifi_merge.patch b/package/hostapd/patches/330-madwifi_merge.patch
new file mode 100644 (file)
index 0000000..e3a89d1
--- /dev/null
@@ -0,0 +1,767 @@
+--- a/src/drivers/driver_madwifi.c
++++ b/src/drivers/driver_madwifi.c
+@@ -71,7 +71,6 @@
+ #define WPA_KEY_RSC_LEN 8
+-#ifdef HOSTAPD
+ #include "priv_netlink.h"
+ #include "netlink.h"
+@@ -82,17 +81,22 @@
+ struct madwifi_driver_data {
+       struct hostapd_data *hapd;              /* back pointer */
+-      char    iface[IFNAMSIZ + 1];
++      void *wext; /* private data for driver_wext */
++      void *ctx;
++      char ifname[IFNAMSIZ + 1];
++      int     ioctl_sock;                     /* socket for ioctl() use */
++
++#ifdef HOSTAPD
+       int     ifindex;
+       struct l2_packet_data *sock_xmit;       /* raw packet xmit socket */
+       struct l2_packet_data *sock_recv;       /* raw packet recv socket */
+-      int     ioctl_sock;                     /* socket for ioctl() use */
+       struct netlink_data *netlink;
+       int     we_version;
+       u8      acct_mac[ETH_ALEN];
+       struct hostap_sta_driver_data acct_data;
+       struct l2_packet_data *sock_raw; /* raw 802.11 management frames */
++#endif
+ };
+ static int madwifi_sta_deauth(void *priv, const u8 *own_addr, const u8 *addr,
+@@ -105,7 +109,7 @@ set80211priv(struct madwifi_driver_data 
+       int do_inline = len < IFNAMSIZ;
+       memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+ #ifdef IEEE80211_IOCTL_FILTERFRAME
+       /* FILTERFRAME must be NOT inline, regardless of size. */
+       if (op == IEEE80211_IOCTL_FILTERFRAME)
+@@ -206,7 +210,7 @@ set80211param(struct madwifi_driver_data
+       struct iwreq iwr;
+       memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+       iwr.u.mode = op;
+       memcpy(iwr.u.name+sizeof(__u32), &arg, sizeof(arg));
+@@ -233,6 +237,7 @@ ether_sprintf(const u8 *addr)
+ }
+ #endif /* CONFIG_NO_STDOUT_DEBUG */
++#ifdef HOSTAPD
+ /*
+  * Configure WPA parameters.
+  */
+@@ -395,7 +400,7 @@ madwifi_sta_set_flags(void *priv, const 
+               return madwifi_set_sta_authorized(priv, addr, 0);
+       return 0;
+ }
+-
++#endif /* HOSTAPD */
+ static int
+ madwifi_del_key(void *priv, const u8 *addr, int key_idx)
+ {
+@@ -407,28 +412,20 @@ madwifi_del_key(void *priv, const u8 *ad
+                  __func__, ether_sprintf(addr), key_idx);
+       memset(&wk, 0, sizeof(wk));
++      wk.idk_keyix = key_idx;
+       if (addr != NULL) {
+               memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN);
+-              wk.idk_keyix = (u8) IEEE80211_KEYIX_NONE;
+-      } else {
+-              wk.idk_keyix = key_idx;
+-      }
+-
+-      ret = set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk));
+-      if (ret < 0) {
+-              wpa_printf(MSG_DEBUG, "%s: Failed to delete key (addr %s"
+-                         " key_idx %d)", __func__, ether_sprintf(addr),
+-                         key_idx);
+       }
+-      return ret;
++      set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk));
++      return 0;
+ }
+ static int
+-wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
+-                         const u8 *addr, int key_idx, int set_tx,
+-                         const u8 *seq, size_t seq_len,
+-                         const u8 *key, size_t key_len)
++madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
++              const u8 *addr, int key_idx, int set_tx,
++              const u8 *seq, size_t seq_len,
++              const u8 *key, size_t key_len)
+ {
+       struct madwifi_driver_data *drv = priv;
+       struct ieee80211req_key wk;
+@@ -462,10 +459,14 @@ wpa_driver_madwifi_set_key(const char *i
+       memset(&wk, 0, sizeof(wk));
+       wk.ik_type = cipher;
+       wk.ik_flags = IEEE80211_KEY_RECV | IEEE80211_KEY_XMIT;
++
+       if (addr == NULL) {
+               memset(wk.ik_macaddr, 0xff, IEEE80211_ADDR_LEN);
+               wk.ik_keyix = key_idx;
+               wk.ik_flags |= IEEE80211_KEY_DEFAULT;
++      } else if (!memcmp(addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN)) {
++              wk.ik_flags |= IEEE80211_KEY_GROUP;
++              memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
+       } else {
+               memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
+               wk.ik_keyix = IEEE80211_KEYIX_NONE;
+@@ -485,6 +486,7 @@ wpa_driver_madwifi_set_key(const char *i
+ }
++#ifdef HOSTAPD
+ static int
+ madwifi_get_seqnum(const char *ifname, void *priv, const u8 *addr, int idx,
+                  u8 *seq)
+@@ -591,7 +593,7 @@ madwifi_read_sta_driver_data(void *priv,
+       memset(data, 0, sizeof(*data));
+       snprintf(buf, sizeof(buf), "/proc/net/madwifi/%s/" MACSTR,
+-               drv->iface, MAC2STR(addr));
++               drv->ifname, MAC2STR(addr));
+       f = fopen(buf, "r");
+       if (!f) {
+@@ -757,7 +759,7 @@ static int madwifi_receive_probe_req(str
+       if (ret)
+               return ret;
+-      drv->sock_raw = l2_packet_init(drv->iface, NULL, ETH_P_80211_RAW,
++      drv->sock_raw = l2_packet_init(drv->ifname, NULL, ETH_P_80211_RAW,
+                                      madwifi_raw_receive, drv, 1);
+       if (drv->sock_raw == NULL)
+               return -1;
+@@ -1017,7 +1019,7 @@ madwifi_get_we_version(struct madwifi_dr
+               return -1;
+       memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+       iwr.u.data.pointer = (caddr_t) range;
+       iwr.u.data.length = buflen;
+@@ -1134,17 +1136,17 @@ madwifi_init(struct hostapd_data *hapd, 
+               perror("socket[PF_INET,SOCK_DGRAM]");
+               goto bad;
+       }
+-      memcpy(drv->iface, params->ifname, sizeof(drv->iface));
++      memcpy(drv->ifname, params->ifname, sizeof(drv->ifname));
+       memset(&ifr, 0, sizeof(ifr));
+-      os_strlcpy(ifr.ifr_name, drv->iface, sizeof(ifr.ifr_name));
++      os_strlcpy(ifr.ifr_name, drv->ifname, sizeof(ifr.ifr_name));
+       if (ioctl(drv->ioctl_sock, SIOCGIFINDEX, &ifr) != 0) {
+               perror("ioctl(SIOCGIFINDEX)");
+               goto bad;
+       }
+       drv->ifindex = ifr.ifr_ifindex;
+-      drv->sock_xmit = l2_packet_init(drv->iface, NULL, ETH_P_EAPOL,
++      drv->sock_xmit = l2_packet_init(drv->ifname, NULL, ETH_P_EAPOL,
+                                       handle_read, drv, 1);
+       if (drv->sock_xmit == NULL)
+               goto bad;
+@@ -1158,7 +1160,7 @@ madwifi_init(struct hostapd_data *hapd, 
+                                               1);
+               if (drv->sock_recv == NULL)
+                       goto bad;
+-      } else if (linux_br_get(brname, drv->iface) == 0) {
++      } else if (linux_br_get(brname, drv->ifname) == 0) {
+               wpa_printf(MSG_DEBUG, "Interface in bridge %s; configure for "
+                          "EAPOL receive", brname);
+               drv->sock_recv = l2_packet_init(brname, NULL, ETH_P_EAPOL,
+@@ -1169,7 +1171,7 @@ madwifi_init(struct hostapd_data *hapd, 
+               drv->sock_recv = drv->sock_xmit;
+       memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+       iwr.u.mode = IW_MODE_MASTER;
+@@ -1179,7 +1181,7 @@ madwifi_init(struct hostapd_data *hapd, 
+               goto bad;
+       }
+-      madwifi_set_privacy(drv->iface, drv, 0); /* default to no privacy */
++      madwifi_set_privacy(drv->ifname, drv, 0); /* default to no privacy */
+       madwifi_receive_probe_req(drv);
+@@ -1204,7 +1206,7 @@ madwifi_deinit(void *priv)
+       struct madwifi_driver_data *drv = priv;
+       netlink_deinit(drv->netlink);
+-      (void) linux_set_iface_flags(drv->ioctl_sock, drv->iface, 0);
++      (void) linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 0);
+       if (drv->ioctl_sock >= 0)
+               close(drv->ioctl_sock);
+       if (drv->sock_recv != NULL && drv->sock_recv != drv->sock_xmit)
+@@ -1223,7 +1225,7 @@ madwifi_set_ssid(const char *ifname, voi
+       struct iwreq iwr;
+       memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+       iwr.u.essid.flags = 1; /* SSID active */
+       iwr.u.essid.pointer = (caddr_t) buf;
+       iwr.u.essid.length = len + 1;
+@@ -1244,7 +1246,7 @@ madwifi_get_ssid(const char *ifname, voi
+       int ret = 0;
+       memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->iface, IFNAMSIZ);
++      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+       iwr.u.essid.pointer = (caddr_t) buf;
+       iwr.u.essid.length = len;
+@@ -1271,137 +1273,16 @@ madwifi_commit(void *priv)
+       return 0;
+ }
+-#else /* HOSTAPD */
++#endif /* HOSTAPD */
+-struct wpa_driver_madwifi_data {
+-      void *wext; /* private data for driver_wext */
+-      void *ctx;
+-      char ifname[IFNAMSIZ + 1];
+-      int sock;
+-};
++#if !defined(NO_SUPPLICANT)
+ static int wpa_driver_madwifi_set_auth_alg(void *priv, int auth_alg);
+ static int wpa_driver_madwifi_set_probe_req_ie(void *priv, const u8 *ies,
+                                              size_t ies_len);
+-
+-static int
+-set80211priv(struct wpa_driver_madwifi_data *drv, int op, void *data, int len,
+-           int show_err)
+-{
+-      struct iwreq iwr;
+-
+-      os_memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+-      if (len < IFNAMSIZ &&
+-          op != IEEE80211_IOCTL_SET_APPIEBUF) {
+-              /*
+-               * Argument data fits inline; put it there.
+-               */
+-              os_memcpy(iwr.u.name, data, len);
+-      } else {
+-              /*
+-               * Argument data too big for inline transfer; setup a
+-               * parameter block instead; the kernel will transfer
+-               * the data for the driver.
+-               */
+-              iwr.u.data.pointer = data;
+-              iwr.u.data.length = len;
+-      }
+-
+-      if (ioctl(drv->sock, op, &iwr) < 0) {
+-              if (show_err) {
+-#ifdef MADWIFI_NG
+-                      int first = IEEE80211_IOCTL_SETPARAM;
+-                      int last = IEEE80211_IOCTL_KICKMAC;
+-                      static const char *opnames[] = {
+-                              "ioctl[IEEE80211_IOCTL_SETPARAM]",
+-                              "ioctl[IEEE80211_IOCTL_GETPARAM]",
+-                              "ioctl[IEEE80211_IOCTL_SETMODE]",
+-                              "ioctl[IEEE80211_IOCTL_GETMODE]",
+-                              "ioctl[IEEE80211_IOCTL_SETWMMPARAMS]",
+-                              "ioctl[IEEE80211_IOCTL_GETWMMPARAMS]",
+-                              "ioctl[IEEE80211_IOCTL_SETCHANLIST]",
+-                              "ioctl[IEEE80211_IOCTL_GETCHANLIST]",
+-                              "ioctl[IEEE80211_IOCTL_CHANSWITCH]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_SET_APPIEBUF]",
+-                              "ioctl[IEEE80211_IOCTL_GETSCANRESULTS]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_GETCHANINFO]",
+-                              "ioctl[IEEE80211_IOCTL_SETOPTIE]",
+-                              "ioctl[IEEE80211_IOCTL_GETOPTIE]",
+-                              "ioctl[IEEE80211_IOCTL_SETMLME]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_SETKEY]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_DELKEY]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_ADDMAC]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_DELMAC]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_WDSMAC]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_WDSDELMAC]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_KICKMAC]",
+-                      };
+-#else /* MADWIFI_NG */
+-                      int first = IEEE80211_IOCTL_SETPARAM;
+-                      int last = IEEE80211_IOCTL_CHANLIST;
+-                      static const char *opnames[] = {
+-                              "ioctl[IEEE80211_IOCTL_SETPARAM]",
+-                              "ioctl[IEEE80211_IOCTL_GETPARAM]",
+-                              "ioctl[IEEE80211_IOCTL_SETKEY]",
+-                              "ioctl[IEEE80211_IOCTL_GETKEY]",
+-                              "ioctl[IEEE80211_IOCTL_DELKEY]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_SETMLME]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_SETOPTIE]",
+-                              "ioctl[IEEE80211_IOCTL_GETOPTIE]",
+-                              "ioctl[IEEE80211_IOCTL_ADDMAC]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_DELMAC]",
+-                              NULL,
+-                              "ioctl[IEEE80211_IOCTL_CHANLIST]",
+-                      };
+-#endif /* MADWIFI_NG */
+-                      int idx = op - first;
+-                      if (first <= op && op <= last &&
+-                          idx < (int) (sizeof(opnames) / sizeof(opnames[0]))
+-                          && opnames[idx])
+-                              perror(opnames[idx]);
+-                      else
+-                              perror("ioctl[unknown???]");
+-              }
+-              return -1;
+-      }
+-      return 0;
+-}
+-
+ static int
+-set80211param(struct wpa_driver_madwifi_data *drv, int op, int arg,
+-            int show_err)
+-{
+-      struct iwreq iwr;
+-
+-      os_memset(&iwr, 0, sizeof(iwr));
+-      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
+-      iwr.u.mode = op;
+-      os_memcpy(iwr.u.name+sizeof(u32), &arg, sizeof(arg));
+-
+-      if (ioctl(drv->sock, IEEE80211_IOCTL_SETPARAM, &iwr) < 0) {
+-              if (show_err) 
+-                      perror("ioctl[IEEE80211_IOCTL_SETPARAM]");
+-              return -1;
+-      }
+-      return 0;
+-}
+-
+-static int
+-wpa_driver_madwifi_set_wpa_ie(struct wpa_driver_madwifi_data *drv,
++wpa_driver_madwifi_set_wpa_ie(struct madwifi_driver_data *drv,
+                             const u8 *wpa_ie, size_t wpa_ie_len)
+ {
+       struct iwreq iwr;
+@@ -1412,7 +1293,7 @@ wpa_driver_madwifi_set_wpa_ie(struct wpa
+       iwr.u.data.pointer = (void *) wpa_ie;
+       iwr.u.data.length = wpa_ie_len;
+-      if (ioctl(drv->sock, IEEE80211_IOCTL_SETOPTIE, &iwr) < 0) {
++      if (ioctl(drv->ioctl_sock, IEEE80211_IOCTL_SETOPTIE, &iwr) < 0) {
+               perror("ioctl[IEEE80211_IOCTL_SETOPTIE]");
+               return -1;
+       }
+@@ -1420,156 +1301,51 @@ wpa_driver_madwifi_set_wpa_ie(struct wpa
+ }
+ static int
+-wpa_driver_madwifi_del_key(struct wpa_driver_madwifi_data *drv, int key_idx,
+-                         const u8 *addr)
+-{
+-      struct ieee80211req_del_key wk;
+-
+-      wpa_printf(MSG_DEBUG, "%s: keyidx=%d", __FUNCTION__, key_idx);
+-      os_memset(&wk, 0, sizeof(wk));
+-      wk.idk_keyix = key_idx;
+-      if (addr != NULL)
+-              os_memcpy(wk.idk_macaddr, addr, IEEE80211_ADDR_LEN);
+-
+-      return set80211priv(drv, IEEE80211_IOCTL_DELKEY, &wk, sizeof(wk), 1);
+-}
+-
+-static int
+-wpa_driver_madwifi_set_key(const char *ifname, void *priv, enum wpa_alg alg,
+-                         const u8 *addr, int key_idx, int set_tx,
+-                         const u8 *seq, size_t seq_len,
+-                         const u8 *key, size_t key_len)
+-{
+-      struct wpa_driver_madwifi_data *drv = priv;
+-      struct ieee80211req_key wk;
+-      char *alg_name;
+-      u_int8_t cipher;
+-
+-      if (alg == WPA_ALG_NONE)
+-              return wpa_driver_madwifi_del_key(drv, key_idx, addr);
+-
+-      switch (alg) {
+-      case WPA_ALG_WEP:
+-              if (addr == NULL || os_memcmp(addr, "\xff\xff\xff\xff\xff\xff",
+-                                            ETH_ALEN) == 0) {
+-                      /*
+-                       * madwifi did not seem to like static WEP key
+-                       * configuration with IEEE80211_IOCTL_SETKEY, so use
+-                       * Linux wireless extensions ioctl for this.
+-                       */
+-                      return wpa_driver_wext_set_key(ifname, drv->wext, alg,
+-                                                     addr, key_idx, set_tx,
+-                                                     seq, seq_len,
+-                                                     key, key_len);
+-              }
+-              alg_name = "WEP";
+-              cipher = IEEE80211_CIPHER_WEP;
+-              break;
+-      case WPA_ALG_TKIP:
+-              alg_name = "TKIP";
+-              cipher = IEEE80211_CIPHER_TKIP;
+-              break;
+-      case WPA_ALG_CCMP:
+-              alg_name = "CCMP";
+-              cipher = IEEE80211_CIPHER_AES_CCM;
+-              break;
+-      default:
+-              wpa_printf(MSG_DEBUG, "%s: unknown/unsupported algorithm %d",
+-                      __FUNCTION__, alg);
+-              return -1;
+-      }
+-
+-      wpa_printf(MSG_DEBUG, "%s: alg=%s key_idx=%d set_tx=%d seq_len=%lu "
+-                 "key_len=%lu", __FUNCTION__, alg_name, key_idx, set_tx,
+-                 (unsigned long) seq_len, (unsigned long) key_len);
+-
+-      if (seq_len > sizeof(u_int64_t)) {
+-              wpa_printf(MSG_DEBUG, "%s: seq_len %lu too big",
+-                         __FUNCTION__, (unsigned long) seq_len);
+-              return -2;
+-      }
+-      if (key_len > sizeof(wk.ik_keydata)) {
+-              wpa_printf(MSG_DEBUG, "%s: key length %lu too big",
+-                         __FUNCTION__, (unsigned long) key_len);
+-              return -3;
+-      }
+-
+-      os_memset(&wk, 0, sizeof(wk));
+-      wk.ik_type = cipher;
+-      wk.ik_flags = IEEE80211_KEY_RECV;
+-      if (addr == NULL ||
+-          os_memcmp(addr, "\xff\xff\xff\xff\xff\xff", ETH_ALEN) == 0)
+-              wk.ik_flags |= IEEE80211_KEY_GROUP;
+-      if (set_tx) {
+-              wk.ik_flags |= IEEE80211_KEY_XMIT | IEEE80211_KEY_DEFAULT;
+-              os_memcpy(wk.ik_macaddr, addr, IEEE80211_ADDR_LEN);
+-      } else
+-              os_memset(wk.ik_macaddr, 0, IEEE80211_ADDR_LEN);
+-      wk.ik_keyix = key_idx;
+-      wk.ik_keylen = key_len;
+-#ifdef WORDS_BIGENDIAN
+-      {
+-              size_t i;
+-              u8 tmp[WPA_KEY_RSC_LEN];
+-              os_memset(tmp, 0, sizeof(tmp));
+-              for (i = 0; i < seq_len; i++)
+-                      tmp[WPA_KEY_RSC_LEN - i - 1] = seq[i];
+-              os_memcpy(&wk.ik_keyrsc, tmp, WPA_KEY_RSC_LEN);
+-      }
+-#else /* WORDS_BIGENDIAN */
+-      os_memcpy(&wk.ik_keyrsc, seq, seq_len);
+-#endif /* WORDS_BIGENDIAN */
+-      os_memcpy(wk.ik_keydata, key, key_len);
+-
+-      return set80211priv(drv, IEEE80211_IOCTL_SETKEY, &wk, sizeof(wk), 1);
+-}
+-
+-static int
+ wpa_driver_madwifi_set_countermeasures(void *priv, int enabled)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       wpa_printf(MSG_DEBUG, "%s: enabled=%d", __FUNCTION__, enabled);
+-      return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled, 1);
++      return set80211param(drv, IEEE80211_PARAM_COUNTERMEASURES, enabled);
+ }
+ static int
+ wpa_driver_madwifi_deauthenticate(void *priv, const u8 *addr, int reason_code)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       struct ieee80211req_mlme mlme;
+       wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
+       mlme.im_op = IEEE80211_MLME_DEAUTH;
+       mlme.im_reason = reason_code;
+       os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN);
+-      return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1);
++      return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme));
+ }
+ static int
+ wpa_driver_madwifi_disassociate(void *priv, const u8 *addr, int reason_code)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       struct ieee80211req_mlme mlme;
+       wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
+       mlme.im_op = IEEE80211_MLME_DISASSOC;
+       mlme.im_reason = reason_code;
+       os_memcpy(mlme.im_macaddr, addr, IEEE80211_ADDR_LEN);
+-      return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme), 1);
++      return set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme, sizeof(mlme));
+ }
+ static int
+ wpa_driver_madwifi_associate(void *priv,
+                            struct wpa_driver_associate_params *params)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       struct ieee80211req_mlme mlme;
+       int ret = 0, privacy = 1;
+       wpa_printf(MSG_DEBUG, "%s", __FUNCTION__);
+       if (set80211param(drv, IEEE80211_PARAM_DROPUNENCRYPTED,
+-                        params->drop_unencrypted, 1) < 0)
++                        params->drop_unencrypted) < 0)
+               ret = -1;
+       if (wpa_driver_madwifi_set_auth_alg(drv, params->auth_alg) < 0)
+               ret = -1;
+@@ -1592,12 +1368,12 @@ wpa_driver_madwifi_associate(void *priv,
+           params->wpa_ie_len == 0)
+               privacy = 0;
+-      if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy, 1) < 0)
++      if (set80211param(drv, IEEE80211_PARAM_PRIVACY, privacy) < 0)
+               ret = -1;
+       if (params->wpa_ie_len &&
+           set80211param(drv, IEEE80211_PARAM_WPA,
+-                        params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1, 1) < 0)
++                        params->wpa_ie[0] == WLAN_EID_RSN ? 2 : 1) < 0)
+               ret = -1;
+       if (params->bssid == NULL) {
+@@ -1605,14 +1381,14 @@ wpa_driver_madwifi_associate(void *priv,
+                * roaming */
+               /* FIX: this does not seem to work; would probably need to
+                * change something in the driver */
+-              if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0)
++              if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0) < 0)
+                       ret = -1;
+               if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
+                                            params->ssid_len) < 0)
+                       ret = -1;
+       } else {
+-              if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0)
++              if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2) < 0)
+                       ret = -1;
+               if (wpa_driver_wext_set_ssid(drv->wext, params->ssid,
+                                            params->ssid_len) < 0)
+@@ -1621,7 +1397,7 @@ wpa_driver_madwifi_associate(void *priv,
+               mlme.im_op = IEEE80211_MLME_ASSOC;
+               os_memcpy(mlme.im_macaddr, params->bssid, IEEE80211_ADDR_LEN);
+               if (set80211priv(drv, IEEE80211_IOCTL_SETMLME, &mlme,
+-                               sizeof(mlme), 1) < 0) {
++                               sizeof(mlme)) < 0) {
+                       wpa_printf(MSG_DEBUG, "%s: SETMLME[ASSOC] failed",
+                                  __func__);
+                       ret = -1;
+@@ -1634,7 +1410,7 @@ wpa_driver_madwifi_associate(void *priv,
+ static int
+ wpa_driver_madwifi_set_auth_alg(void *priv, int auth_alg)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       int authmode;
+       if ((auth_alg & WPA_AUTH_ALG_OPEN) &&
+@@ -1645,13 +1421,13 @@ wpa_driver_madwifi_set_auth_alg(void *pr
+       else
+               authmode = IEEE80211_AUTH_OPEN;
+-      return set80211param(drv, IEEE80211_PARAM_AUTHMODE, authmode, 1);
++      return set80211param(drv, IEEE80211_PARAM_AUTHMODE, authmode);
+ }
+ static int
+ wpa_driver_madwifi_scan(void *priv, struct wpa_driver_scan_params *params)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       struct iwreq iwr;
+       int ret = 0;
+       const u8 *ssid = params->ssids[0].ssid;
+@@ -1669,7 +1445,7 @@ wpa_driver_madwifi_scan(void *priv, stru
+       if (wpa_driver_wext_set_ssid(drv->wext, ssid, ssid_len) < 0)
+               ret = -1;
+-      if (ioctl(drv->sock, SIOCSIWSCAN, &iwr) < 0) {
++      if (ioctl(drv->ioctl_sock, SIOCSIWSCAN, &iwr) < 0) {
+               perror("ioctl[SIOCSIWSCAN]");
+               ret = -1;
+       }
+@@ -1691,14 +1467,14 @@ wpa_driver_madwifi_scan(void *priv, stru
+ static int wpa_driver_madwifi_get_bssid(void *priv, u8 *bssid)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       return wpa_driver_wext_get_bssid(drv->wext, bssid);
+ }
+ static int wpa_driver_madwifi_get_ssid(void *priv, u8 *ssid)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       return wpa_driver_wext_get_ssid(drv->wext, ssid);
+ }
+@@ -1706,14 +1482,14 @@ static int wpa_driver_madwifi_get_ssid(v
+ static struct wpa_scan_results *
+ wpa_driver_madwifi_get_scan_results(void *priv)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       return wpa_driver_wext_get_scan_results(drv->wext);
+ }
+ static int wpa_driver_madwifi_set_operstate(void *priv, int state)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       return wpa_driver_wext_set_operstate(drv->wext, state);
+ }
+@@ -1734,7 +1510,7 @@ static int wpa_driver_madwifi_set_probe_
+       ret = set80211priv(priv, IEEE80211_IOCTL_SET_APPIEBUF, probe_req_ie,
+                          sizeof(struct ieee80211req_getset_appiebuf) +
+-                         ies_len, 1);
++                         ies_len);
+       os_free(probe_req_ie);
+@@ -1744,7 +1520,7 @@ static int wpa_driver_madwifi_set_probe_
+ static void * wpa_driver_madwifi_init(void *ctx, const char *ifname)
+ {
+-      struct wpa_driver_madwifi_data *drv;
++      struct madwifi_driver_data *drv;
+       drv = os_zalloc(sizeof(*drv));
+       if (drv == NULL)
+@@ -1755,17 +1531,17 @@ static void * wpa_driver_madwifi_init(vo
+       drv->ctx = ctx;
+       os_strlcpy(drv->ifname, ifname, sizeof(drv->ifname));
+-      drv->sock = socket(PF_INET, SOCK_DGRAM, 0);
+-      if (drv->sock < 0)
++      drv->ioctl_sock = socket(PF_INET, SOCK_DGRAM, 0);
++      if (drv->ioctl_sock < 0)
+               goto fail2;
+-      if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2, 1) < 0) {
++      if (set80211param(drv, IEEE80211_PARAM_ROAMING, 2) < 0) {
+               wpa_printf(MSG_DEBUG, "%s: failed to set wpa_supplicant-based "
+                          "roaming", __FUNCTION__);
+               goto fail3;
+       }
+-      if (set80211param(drv, IEEE80211_PARAM_WPA, 3, 1) < 0) {
++      if (set80211param(drv, IEEE80211_PARAM_WPA, 3) < 0) {
+               wpa_printf(MSG_DEBUG, "%s: failed to enable WPA support",
+                          __FUNCTION__);
+               goto fail3;
+@@ -1774,7 +1550,7 @@ static void * wpa_driver_madwifi_init(vo
+       return drv;
+ fail3:
+-      close(drv->sock);
++      close(drv->ioctl_sock);
+ fail2:
+       wpa_driver_wext_deinit(drv->wext);
+ fail:
+@@ -1785,38 +1561,37 @@ fail:
+ static void wpa_driver_madwifi_deinit(void *priv)
+ {
+-      struct wpa_driver_madwifi_data *drv = priv;
++      struct madwifi_driver_data *drv = priv;
+       if (wpa_driver_madwifi_set_wpa_ie(drv, NULL, 0) < 0) {
+               wpa_printf(MSG_DEBUG, "%s: failed to clear WPA IE",
+                          __FUNCTION__);
+       }
+-      if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0, 1) < 0) {
++      if (set80211param(drv, IEEE80211_PARAM_ROAMING, 0) < 0) {
+               wpa_printf(MSG_DEBUG, "%s: failed to enable driver-based "
+                          "roaming", __FUNCTION__);
+       }
+-      if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0, 1) < 0) {
++      if (set80211param(drv, IEEE80211_PARAM_PRIVACY, 0) < 0) {
+               wpa_printf(MSG_DEBUG, "%s: failed to disable forced Privacy "
+                          "flag", __FUNCTION__);
+       }
+-      if (set80211param(drv, IEEE80211_PARAM_WPA, 0, 1) < 0) {
++      if (set80211param(drv, IEEE80211_PARAM_WPA, 0) < 0) {
+               wpa_printf(MSG_DEBUG, "%s: failed to disable WPA",
+                          __FUNCTION__);
+       }
+       wpa_driver_wext_deinit(drv->wext);
+-      close(drv->sock);
++      close(drv->ioctl_sock);
+       os_free(drv);
+ }
+-#endif /* HOSTAPD */
+-
++#endif
+ const struct wpa_driver_ops wpa_driver_madwifi_ops = {
+       .name                   = "madwifi",
+       .desc                   = "MADWIFI 802.11 support (Atheros, etc.)",
+-      .set_key                = wpa_driver_madwifi_set_key,
++      .set_key                = madwifi_set_key,
+ #ifdef HOSTAPD
+       .hapd_init              = madwifi_init,
+       .hapd_deinit            = madwifi_deinit,
+@@ -1836,7 +1611,8 @@ const struct wpa_driver_ops wpa_driver_m
+       .sta_clear_stats        = madwifi_sta_clear_stats,
+       .commit                 = madwifi_commit,
+       .set_ap_wps_ie          = madwifi_set_ap_wps_ie,
+-#else /* HOSTAPD */
++#endif /* HOSTAPD */
++#if !defined(NO_SUPPLICANT)
+       .get_bssid              = wpa_driver_madwifi_get_bssid,
+       .get_ssid               = wpa_driver_madwifi_get_ssid,
+       .init                   = wpa_driver_madwifi_init,
+@@ -1848,5 +1624,5 @@ const struct wpa_driver_ops wpa_driver_m
+       .disassociate           = wpa_driver_madwifi_disassociate,
+       .associate              = wpa_driver_madwifi_associate,
+       .set_operstate          = wpa_driver_madwifi_set_operstate,
+-#endif /* HOSTAPD */
++#endif
+ };
diff --git a/package/wpa_supplicant/Config.in b/package/wpa_supplicant/Config.in
deleted file mode 100644 (file)
index 10b8a43..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-# wpa_supplicant config
-config WPA_SUPPLICANT_NO_TIMESTAMP_CHECK
-       bool "Disable timestamp check"
-       depends PACKAGE_wpa-supplicant
-       default n
-       help
-         This disables the timestamp check for certificates in wpa_supplicant
-         Useful for devices without RTC that cannot reliably get the real date/time
-choice
-        prompt "Choose TLS provider"
-        default WPA_SUPPLICANT_INTERNAL
-       depends PACKAGE_wpa-supplicant
-
-config WPA_SUPPLICANT_INTERNAL
-       bool "internal"
-
-config WPA_SUPPLICANT_OPENSSL
-       bool "openssl"
-       select PACKAGE_libopenssl
-
-endchoice
diff --git a/package/wpa_supplicant/Makefile b/package/wpa_supplicant/Makefile
deleted file mode 100644 (file)
index 39c66e7..0000000
+++ /dev/null
@@ -1,94 +0,0 @@
-#
-# Copyright (C) 2008-2009 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=wpa_supplicant
-PKG_VERSION:=0.6.9
-PKG_RELEASE:=2
-PKG_MD5SUM:=0efb8fcedf0a8acf6f423dfdb0658fdd
-
-PKG_SOURCE_URL:=http://hostap.epitest.fi/releases
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-
-PKG_BUILD_DEPENDS:= \
-       PACKAGE_kmod-madwifi:madwifi \
-
-PKG_CONFIG_DEPENDS:= \
-       CONFIG_PACKAGE_kmod-madwifi \
-       CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK \
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/wpa-supplicant
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=WPA Supplicant
-  DEPENDS:=$(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),+libopenssl)
-  URL:=http://hostap.epitest.fi/wpa_supplicant/
-endef
-
-define Package/wpa-supplicant/Description
- WPA Supplicant
-endef
-
-define Package/wpa-supplicant/config
-       source "$(SOURCE)/Config.in"
-endef
-
-define Package/wpa-cli
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=wpa-supplicant
-  TITLE:=WPA Supplicant command line interface
-endef
-
-define Package/wpa-cli/Description
- WPA Supplicant control utility
-endef
-
-CONFIG=$(firstword $(wildcard ./files/config.$(BOARD) ./files/config.$(ARCH) ./config))
-TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/madwifi $(if $(CONFIG_WPA_SUPPLICANT_NO_TIMESTAMP_CHECK),-DNO_TIMESTAMP_CHECK)
-
-define Build/Configure
-       cp $(CONFIG) $(PKG_BUILD_DIR)/wpa_supplicant/.config
-       [ -f $(STAMP_CONFIGURED) ] || $(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant clean
-       rm -f $(PKG_BUILD_DIR)/.configured*
-       $(if $(CONFIG_PACKAGE_kmod-madwifi),,$(SED) 's,^CONFIG_DRIVER_MADWIFI,#CONFIG_DRIVER_MADWIFI,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
-       $(if $(CONFIG_PACKAGE_kmod-hostap),,$(SED) 's,^CONFIG_DRIVER_HOSTAP,#CONFIG_DRIVER_HOSTAP,g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
-       $(if $(CONFIG_WPA_SUPPLICANT_OPENSSL),$(SED) 's|^CONFIG_TLS.*|CONFIG_TLS=openssl|g' $(PKG_BUILD_DIR)/wpa_supplicant/.config)
-endef
-
-define Build/Compile
-       rm -rf $(PKG_INSTALL_DIR)
-       mkdir -p $(PKG_INSTALL_DIR)
-       CFLAGS="$(TARGET_CFLAGS)" \
-       $(MAKE) -C $(PKG_BUILD_DIR)/wpa_supplicant \
-               CC="$(TARGET_CC)" \
-               KERNEL=$(LINUX_DIR) \
-               CPPFLAGS="$(TARGET_CPPFLAGS)" \
-               LDFLAGS="$(TARGET_LDFLAGS)" \
-               all
-endef
-
-define Package/wpa-supplicant/install
-       $(INSTALL_DIR) $(1)/usr/sbin
-       $(CP) \
-               $(PKG_BUILD_DIR)/wpa_supplicant/wpa_supplicant \
-               $(PKG_BUILD_DIR)/wpa_supplicant/wpa_passphrase \
-               $(1)/usr/sbin/
-       $(INSTALL_DIR) $(1)/lib/wifi
-       $(INSTALL_DATA) ./files/wpa_supplicant.sh $(1)/lib/wifi/wpa_supplicant.sh
-endef
-
-define Package/wpa-cli/install
-       $(INSTALL_DIR) $(1)/usr/sbin
-       $(CP) $(PKG_BUILD_DIR)/wpa_supplicant/wpa_cli $(1)/usr/sbin/
-endef
-
-$(eval $(call BuildPackage,wpa-supplicant))
-$(eval $(call BuildPackage,wpa-cli))
diff --git a/package/wpa_supplicant/config b/package/wpa_supplicant/config
deleted file mode 100644 (file)
index 3ca1cfa..0000000
+++ /dev/null
@@ -1,382 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#      -I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-#CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-#CONFIG_DRIVER_ROBOSWITCH=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Remove AES extra functions. This can be used to reduce code size by about
-# 1.5 kB by removing extra AES modes that are not needed for commonly used
-# client configurations (they are needed for some EAP types).
-#CONFIG_NO_AES_EXTRAS=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#      path is given on command line, not here; this option is just used to
-#      select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for DBus control interface
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# Include client MLME (management frame processing).
-# This can be used to move MLME processing of Linux mac80211 stack into user
-# space. Please note that this is currently only available with
-# driver_nl80211.c and only with a modified version of Linux kernel and
-# wpa_supplicant.
-#CONFIG_CLIENT_MLME=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
diff --git a/package/wpa_supplicant/files/config.brcm-2.4 b/package/wpa_supplicant/files/config.brcm-2.4
deleted file mode 100644 (file)
index 0e58fa0..0000000
+++ /dev/null
@@ -1,382 +0,0 @@
-# Example wpa_supplicant build time configuration
-#
-# This file lists the configuration options that are used when building the
-# hostapd binary. All lines starting with # are ignored. Configuration option
-# lines must be commented out complete, if they are not to be included, i.e.,
-# just setting VARIABLE=n is not disabling that variable.
-#
-# This file is included in Makefile, so variables like CFLAGS and LIBS can also
-# be modified from here. In most cases, these lines should use += in order not
-# to override previous values of the variables.
-
-
-# Uncomment following two lines and fix the paths if you have installed OpenSSL
-# or GnuTLS in non-default location
-#CFLAGS += -I/usr/local/openssl/include
-#LIBS += -L/usr/local/openssl/lib
-
-# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
-# the kerberos files are not in the default include path. Following line can be
-# used to fix build issues on such systems (krb5.h not found).
-#CFLAGS += -I/usr/include/kerberos
-
-# Example configuration for various cross-compilation platforms
-
-#### sveasoft (e.g., for Linksys WRT54G) ######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
-#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
-###############################################################################
-
-#### openwrt (e.g., for Linksys WRT54G) #######################################
-#CC=mipsel-uclibc-gcc
-#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
-#CFLAGS += -Os
-#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
-#      -I../WRT54GS/release/src/include
-#LIBS = -lssl
-###############################################################################
-
-
-# Driver interface for Host AP driver
-CONFIG_DRIVER_HOSTAP=y
-
-# Driver interface for Agere driver
-#CONFIG_DRIVER_HERMES=y
-# Change include directories to match with the local setup
-#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
-#CFLAGS += -I../../include/wireless
-
-# Driver interface for madwifi driver
-CONFIG_DRIVER_MADWIFI=y
-# Set include directory to the madwifi source tree
-#CFLAGS += -I../../madwifi
-
-# Driver interface for Prism54 driver
-# (Note: Prism54 is not yet supported, i.e., this will not work as-is and is
-# for developers only)
-#CONFIG_DRIVER_PRISM54=y
-
-# Driver interface for ndiswrapper
-#CONFIG_DRIVER_NDISWRAPPER=y
-
-# Driver interface for Atmel driver
-#CONFIG_DRIVER_ATMEL=y
-
-# Driver interface for old Broadcom driver
-# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
-# Linux wireless extensions and does not need (or even work) with the old
-# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
-#CONFIG_DRIVER_BROADCOM=y
-# Example path for wlioctl.h; change to match your configuration
-#CFLAGS += -I/opt/WRT54GS/release/src/include
-
-# Driver interface for Intel ipw2100/2200 driver
-#CONFIG_DRIVER_IPW=y
-
-# Driver interface for Ralink driver
-#CONFIG_DRIVER_RALINK=y
-
-# Driver interface for generic Linux wireless extensions
-CONFIG_DRIVER_WEXT=y
-
-# Driver interface for Linux drivers using the nl80211 kernel interface
-#CONFIG_DRIVER_NL80211=y
-
-# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
-#CONFIG_DRIVER_BSD=y
-#CFLAGS += -I/usr/local/include
-#LIBS += -L/usr/local/lib
-
-# Driver interface for Windows NDIS
-#CONFIG_DRIVER_NDIS=y
-#CFLAGS += -I/usr/include/w32api/ddk
-#LIBS += -L/usr/local/lib
-# For native build using mingw
-#CONFIG_NATIVE_WINDOWS=y
-# Additional directories for cross-compilation on Linux host for mingw target
-#CFLAGS += -I/opt/mingw/mingw32/include/ddk
-#LIBS += -L/opt/mingw/mingw32/lib
-#CC=mingw32-gcc
-# By default, driver_ndis uses WinPcap for low-level operations. This can be
-# replaced with the following option which replaces WinPcap calls with NDISUIO.
-# However, this requires that WZC is disabled (net stop wzcsvc) before starting
-# wpa_supplicant.
-# CONFIG_USE_NDISUIO=y
-
-# Driver interface for development testing
-#CONFIG_DRIVER_TEST=y
-
-# Driver interface for wired Ethernet drivers
-CONFIG_DRIVER_WIRED=y
-
-# Driver interface for the Broadcom RoboSwitch family
-CONFIG_DRIVER_ROBOSWITCH=y
-
-# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
-# included)
-CONFIG_IEEE8021X_EAPOL=y
-
-# EAP-MD5
-CONFIG_EAP_MD5=y
-
-# EAP-MSCHAPv2
-CONFIG_EAP_MSCHAPV2=y
-
-# EAP-TLS
-CONFIG_EAP_TLS=y
-
-# EAL-PEAP
-CONFIG_EAP_PEAP=y
-
-# EAP-TTLS
-CONFIG_EAP_TTLS=y
-
-# EAP-FAST
-# Note: Default OpenSSL package does not include support for all the
-# functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
-# the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
-# to add the needed functions.
-#CONFIG_EAP_FAST=y
-
-# EAP-GTC
-CONFIG_EAP_GTC=y
-
-# EAP-OTP
-#CONFIG_EAP_OTP=y
-
-# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
-#CONFIG_EAP_SIM=y
-
-# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
-#CONFIG_EAP_PSK=y
-
-# EAP-PAX
-#CONFIG_EAP_PAX=y
-
-# LEAP
-CONFIG_EAP_LEAP=y
-
-# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
-#CONFIG_EAP_AKA=y
-
-# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
-# This requires CONFIG_EAP_AKA to be enabled, too.
-#CONFIG_EAP_AKA_PRIME=y
-
-# Enable USIM simulator (Milenage) for EAP-AKA
-#CONFIG_USIM_SIMULATOR=y
-
-# EAP-SAKE
-#CONFIG_EAP_SAKE=y
-
-# EAP-GPSK
-#CONFIG_EAP_GPSK=y
-# Include support for optional SHA256 cipher suite in EAP-GPSK
-#CONFIG_EAP_GPSK_SHA256=y
-
-# EAP-TNC and related Trusted Network Connect support (experimental)
-#CONFIG_EAP_TNC=y
-
-# Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
-
-# EAP-IKEv2
-#CONFIG_EAP_IKEV2=y
-
-# PKCS#12 (PFX) support (used to read private key and certificate file from
-# a file that usually has extension .p12 or .pfx)
-CONFIG_PKCS12=y
-
-# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
-# engine.
-#CONFIG_SMARTCARD=y
-
-# PC/SC interface for smartcards (USIM, GSM SIM)
-# Enable this if EAP-SIM or EAP-AKA is included
-#CONFIG_PCSC=y
-
-# Development testing
-#CONFIG_EAPOL_TEST=y
-
-# Select control interface backend for external programs, e.g, wpa_cli:
-# unix = UNIX domain sockets (default for Linux/*BSD)
-# udp = UDP sockets using localhost (127.0.0.1)
-# named_pipe = Windows Named Pipe (default for Windows)
-# y = use default (backwards compatibility)
-# If this option is commented out, control interface is not included in the
-# build.
-CONFIG_CTRL_IFACE=y
-
-# Include support for GNU Readline and History Libraries in wpa_cli.
-# When building a wpa_cli binary for distribution, please note that these
-# libraries are licensed under GPL and as such, BSD license may not apply for
-# the resulting binary.
-#CONFIG_READLINE=y
-
-# Remove debugging code that is printing out debug message to stdout.
-# This can be used to reduce the size of the wpa_supplicant considerably
-# if debugging code is not needed. The size reduction can be around 35%
-# (e.g., 90 kB).
-#CONFIG_NO_STDOUT_DEBUG=y
-
-# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
-# 35-50 kB in code size.
-#CONFIG_NO_WPA=y
-
-# Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
-# save about 1 kB in code size when building only WPA-Personal (no EAP support)
-# or 6 kB if building for WPA-Enterprise.
-#CONFIG_NO_WPA2=y
-
-# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
-# This option can be used to reduce code size by removing support for
-# converting ASCII passphrases into PSK. If this functionality is removed, the
-# PSK can only be configured as the 64-octet hexstring (e.g., from
-# wpa_passphrase). This saves about 0.5 kB in code size.
-#CONFIG_NO_WPA_PASSPHRASE=y
-
-# Remove AES extra functions. This can be used to reduce code size by about
-# 1.5 kB by removing extra AES modes that are not needed for commonly used
-# client configurations (they are needed for some EAP types).
-#CONFIG_NO_AES_EXTRAS=y
-
-# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
-# This can be used if ap_scan=1 mode is never enabled.
-#CONFIG_NO_SCAN_PROCESSING=y
-
-# Select configuration backend:
-# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
-#      path is given on command line, not here; this option is just used to
-#      select the backend that allows configuration files to be used)
-# winreg = Windows registry (see win_example.reg for an example)
-CONFIG_BACKEND=file
-
-# Remove configuration write functionality (i.e., to allow the configuration
-# file to be updated based on runtime configuration changes). The runtime
-# configuration can still be changed, the changes are just not going to be
-# persistent over restarts. This option can be used to reduce code size by
-# about 3.5 kB.
-CONFIG_NO_CONFIG_WRITE=y
-
-# Remove support for configuration blobs to reduce code size by about 1.5 kB.
-#CONFIG_NO_CONFIG_BLOBS=y
-
-# Select program entry point implementation:
-# main = UNIX/POSIX like main() function (default)
-# main_winsvc = Windows service (read parameters from registry)
-# main_none = Very basic example (development use only)
-CONFIG_MAIN=main
-
-# Select wrapper for operatins system and C library specific functions
-# unix = UNIX/POSIX like systems (default)
-# win32 = Windows systems
-# none = Empty template
-CONFIG_OS=unix
-
-# Select event loop implementation
-# eloop = select() loop (default)
-# eloop_win = Windows events and WaitForMultipleObject() loop
-# eloop_none = Empty template
-CONFIG_ELOOP=eloop
-
-# Select layer 2 packet implementation
-# linux = Linux packet socket (default)
-# pcap = libpcap/libdnet/WinPcap
-# freebsd = FreeBSD libpcap
-# winpcap = WinPcap with receive thread
-# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
-# none = Empty template
-CONFIG_L2_PACKET=linux
-
-# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
-CONFIG_PEERKEY=y
-
-# IEEE 802.11w (management frame protection)
-# This version is an experimental implementation based on IEEE 802.11w/D1.0
-# draft and is subject to change since the standard has not yet been finalized.
-# Driver support is also needed for IEEE 802.11w.
-#CONFIG_IEEE80211W=y
-
-# Select TLS implementation
-# openssl = OpenSSL (default)
-# gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
-# internal = Internal TLSv1 implementation (experimental)
-# none = Empty template
-CONFIG_TLS=internal
-
-# Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
-# You need CONFIG_TLS=gnutls for this to have any effect. Please note that
-# even though the core GnuTLS library is released under LGPL, this extra
-# library uses GPL and as such, the terms of GPL apply to the combination
-# of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
-# apply for distribution of the resulting binary.
-#CONFIG_GNUTLS_EXTRA=y
-
-# If CONFIG_TLS=internal is used, additional library and include paths are
-# needed for LibTomMath. Alternatively, an integrated, minimal version of
-# LibTomMath can be used. See beginning of libtommath.c for details on benefits
-# and drawbacks of this option.
-CONFIG_INTERNAL_LIBTOMMATH=y
-#ifndef CONFIG_INTERNAL_LIBTOMMATH
-#LTM_PATH=/usr/src/libtommath-0.39
-#CFLAGS += -I$(LTM_PATH)
-#LIBS += -L$(LTM_PATH)
-#LIBS_p += -L$(LTM_PATH)
-#endif
-# At the cost of about 4 kB of additional binary size, the internal LibTomMath
-# can be configured to include faster routines for exptmod, sqr, and div to
-# speed up DH and RSA calculation considerably
-#CONFIG_INTERNAL_LIBTOMMATH_FAST=y
-
-# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
-# This is only for Windows builds and requires WMI-related header files and
-# WbemUuid.Lib from Platform SDK even when building with MinGW.
-#CONFIG_NDIS_EVENTS_INTEGRATED=y
-#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
-
-# Add support for DBus control interface
-#CONFIG_CTRL_IFACE_DBUS=y
-
-# Add support for loading EAP methods dynamically as shared libraries.
-# When this option is enabled, each EAP method can be either included
-# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
-# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
-# be loaded in the beginning of the wpa_supplicant configuration file
-# (see load_dynamic_eap parameter in the example file) before being used in
-# the network blocks.
-#
-# Note that some shared parts of EAP methods are included in the main program
-# and in order to be able to use dynamic EAP methods using these parts, the
-# main program must have been build with the EAP method enabled (=y or =dyn).
-# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
-# unless at least one of them was included in the main build to force inclusion
-# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
-# in the main build to be able to load these methods dynamically.
-#
-# Please also note that using dynamic libraries will increase the total binary
-# size. Thus, it may not be the best option for targets that have limited
-# amount of memory/flash.
-#CONFIG_DYNAMIC_EAP_METHODS=y
-
-# Include client MLME (management frame processing).
-# This can be used to move MLME processing of Linux mac80211 stack into user
-# space. Please note that this is currently only available with
-# driver_nl80211.c and only with a modified version of Linux kernel and
-# wpa_supplicant.
-#CONFIG_CLIENT_MLME=y
-
-# IEEE Std 802.11r-2008 (Fast BSS Transition)
-#CONFIG_IEEE80211R=y
-
-# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
-CONFIG_DEBUG_FILE=y
-
-# Enable privilege separation (see README 'Privilege separation' for details)
-#CONFIG_PRIVSEP=y
-
-# Enable mitigation against certain attacks against TKIP by delaying Michael
-# MIC error reports by a random amount of time between 0 and 60 seconds
-#CONFIG_DELAYED_MIC_ERROR_REPORT=y
diff --git a/package/wpa_supplicant/files/config.brcm47xx b/package/wpa_supplicant/files/config.brcm47xx
deleted file mode 120000 (symlink)
index c3fbf34..0000000
+++ /dev/null
@@ -1 +0,0 @@
-config.brcm-2.4
\ No newline at end of file
diff --git a/package/wpa_supplicant/files/config.brcm63xx b/package/wpa_supplicant/files/config.brcm63xx
deleted file mode 120000 (symlink)
index c3fbf34..0000000
+++ /dev/null
@@ -1 +0,0 @@
-config.brcm-2.4
\ No newline at end of file
diff --git a/package/wpa_supplicant/files/wpa_supplicant.sh b/package/wpa_supplicant/files/wpa_supplicant.sh
deleted file mode 100644 (file)
index ea10b38..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
-wpa_supplicant_setup_vif() {
-       local vif="$1"
-       local driver="$2"
-       local key="$key"
-
-       # wpa_supplicant should use wext for mac80211 cards
-       [ "$driver" = "mac80211" ] && driver='wext'
-
-       # make sure we have the psk
-       [ -n "$key" ] || {
-               config_get key "$vif" key
-       }
-
-       case "$enc" in
-               *wep*)
-                       key_mgmt='NONE'
-                       config_get key "$vif" key
-                       key="${key:-1}"
-                       case "$key" in
-                               [1234])
-                                       for idx in 1 2 3 4; do
-                                               local zidx
-                                               zidx=$(($idx - 1))
-                                               config_get ckey "$vif" "key${idx}"
-                                               [ -n "$ckey" ] && \
-                                                       append "wep_key${zidx}" "wep_key${zidx}=$(prepare_key_wep "$ckey")"
-                                       done
-                                       wep_tx_keyidx="wep_tx_keyidx=$((key - 1))"
-                               ;;
-                               *)
-                                       wep_key0="wep_key0=$(prepare_key_wep "$key")"
-                                       wep_tx_keyidx="wep_tx_keyidx=0"
-                               ;;
-                       esac
-               ;;
-               *psk*)
-                       key_mgmt='WPA-PSK'
-                       config_get_bool usepassphrase "$vif" passphrase 1
-                       case "$enc" in
-                               *psk2*)
-                                       proto='proto=RSN'
-                                       if [ "$usepassphrase" = "1" ]; then
-                                               passphrase="psk=\"${key}\""
-                                       else
-                                               passphrase="psk=${key}"
-                                       fi
-                               ;;
-                               *psk*)
-                                       proto='proto=WPA'
-                                       if [ "$usepassphrase" = "1" ]; then
-                                               passphrase="psk=\"${key}\""
-                                       else
-                                               passphrase="psk=${key}"
-                                       fi
-                               ;;
-                       esac
-               ;;
-               *wpa*|*8021x*)
-                       proto='proto=WPA2'
-                       key_mgmt='WPA-EAP'
-                       config_get ca_cert "$vif" ca_cert
-                       ca_cert=${ca_cert:+"ca_cert=\"$ca_cert\""}
-                       case "$eap_type" in
-                               tls)
-                                       pairwise='pairwise=CCMP'
-                                       group='group=CCMP'
-                                       config_get priv_key "$vif" priv_key
-                                       config_get priv_key_pwd "$vif" priv_key_pwd
-                                       priv_key="private_key=\"$priv_key\""
-                                       priv_key_pwd="private_key_passwd=\"$priv_key_pwd\""
-                               ;;
-                               peap|ttls)
-                                       config_get auth "$vif" auth
-                                       config_get identity "$vif" identity
-                                       config_get password "$vif" password
-                                       phase2="phase2=\"auth=${auth:-MSCHAPV2}\""
-                                       identity="identity=\"$identity\""
-                                       password="password=\"$password\""
-                               ;;
-                       esac
-                       eap_type="eap=$(echo $eap_type | tr 'a-z' 'A-Z')"
-               ;;
-       esac
-       config_get ifname "$vif" ifname
-       config_get bridge "$vif" bridge
-       config_get ssid "$vif" ssid
-       config_get bssid "$vif" bssid
-       bssid=${bssid:+"bssid=$bssid"}
-       cat > /var/run/wpa_supplicant-$ifname.conf <<EOF
-ctrl_interface=/var/run/wpa_supplicant-$ifname
-network={
-       scan_ssid=1
-       ssid="$ssid"
-       $bssid
-       key_mgmt=$key_mgmt
-       $proto
-       $passphrase
-       $pairwise
-       $group
-       $eap_type
-       $ca_cert
-       $priv_key
-       $priv_key_pwd
-       $phase2
-       $identity
-       $password
-       $wep_key0
-       $wep_key1
-       $wep_key2
-       $wep_key3
-       $wep_tx_keyidx
-}
-EOF
-       [ -z "$proto" -a "$key_mgmt" != "NONE" ] || \
-               wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
-}
diff --git a/package/wpa_supplicant/patches/100-timestamp_check.patch b/package/wpa_supplicant/patches/100-timestamp_check.patch
deleted file mode 100644 (file)
index 98fdbbc..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/src/tls/x509v3.c
-+++ b/src/tls/x509v3.c
-@@ -1591,8 +1591,11 @@ int x509_certificate_chain_validate(stru
-               if (chain_trusted)
-                       continue;
--              if ((unsigned long) now.sec <
-+              if (
-+#ifndef NO_TIMESTAMP_CHECK
-+                  (unsigned long) now.sec <
-                   (unsigned long) cert->not_before ||
-+#endif
-                   (unsigned long) now.sec >
-                   (unsigned long) cert->not_after) {
-                       wpa_printf(MSG_INFO, "X509: Certificate not valid "
diff --git a/package/wpa_supplicant/patches/110-roaming.patch b/package/wpa_supplicant/patches/110-roaming.patch
deleted file mode 100644 (file)
index 077c2e5..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
-This patch decreases the timeouts for assoc/auth to more realistic values. Improves roaming speed
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -854,7 +854,7 @@ static void wpa_supplicant_event_assoc(s
-               wpa_supplicant_set_state(wpa_s, WPA_COMPLETED);
-       } else if (!ft_completed) {
-               /* Timeout for receiving the first EAPOL packet */
--              wpa_supplicant_req_auth_timeout(wpa_s, 10, 0);
-+              wpa_supplicant_req_auth_timeout(wpa_s, 3, 0);
-       }
-       wpa_supplicant_cancel_scan(wpa_s);
---- a/wpa_supplicant/scan.c
-+++ b/wpa_supplicant/scan.c
-@@ -189,6 +189,7 @@ static void wpa_supplicant_scan(void *el
-       }
- #endif /* CONFIG_WPS */
-+      wpa_drv_flush_pmkid(wpa_s);
-       if (wpa_s->use_client_mlme) {
-               ieee80211_sta_set_probe_req_ie(wpa_s, extra_ie, extra_ie_len);
-               ret = ieee80211_sta_req_scan(wpa_s, ssid ? ssid->ssid : NULL,
-@@ -203,7 +204,7 @@ static void wpa_supplicant_scan(void *el
-       if (ret) {
-               wpa_printf(MSG_WARNING, "Failed to initiate AP scan.");
--              wpa_supplicant_req_scan(wpa_s, 10, 0);
-+              wpa_supplicant_req_scan(wpa_s, 3, 0);
-       } else
-               wpa_s->scan_runs++;
- }
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1160,10 +1160,10 @@ void wpa_supplicant_associate(struct wpa
-               if (assoc_failed) {
-                       /* give IBSS a bit more time */
--                      timeout = ssid->mode ? 10 : 5;
-+                      timeout = ssid->mode ? 5 : 2;
-               } else if (wpa_s->conf->ap_scan == 1) {
-                       /* give IBSS a bit more time */
--                      timeout = ssid->mode ? 20 : 10;
-+                      timeout = ssid->mode ? 7 : 3;
-               }
-               wpa_supplicant_req_auth_timeout(wpa_s, timeout, 0);
-       }
diff --git a/package/wpa_supplicant/patches/120-ssid_scan.patch b/package/wpa_supplicant/patches/120-ssid_scan.patch
deleted file mode 100644 (file)
index 6beaed4..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-Don't do broadcast SSID scans, if all configured SSIDs use scan_ssid=1. Improves background scanning in supplicant-managed roaming.
-
---- a/wpa_supplicant/scan.c
-+++ b/wpa_supplicant/scan.c
-@@ -73,6 +73,7 @@ static void wpa_supplicant_scan(void *el
-       struct wpabuf *wps_ie = NULL;
-       const u8 *extra_ie = NULL;
-       size_t extra_ie_len = 0;
-+      int scan_ssid_all = 1;
-       int wps = 0;
- #ifdef CONFIG_WPS
-       enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
-@@ -82,6 +83,17 @@ static void wpa_supplicant_scan(void *el
-               return;
-       enabled = 0;
-+
-+      /* check if all configured ssids should be scanned directly */
-+      ssid = wpa_s->conf->ssid;
-+      while (ssid) {
-+              if (!ssid->scan_ssid) {
-+                      scan_ssid_all = 0;
-+                      break;
-+              }
-+              ssid = ssid->next;
-+      }
-+
-       ssid = wpa_s->conf->ssid;
-       while (ssid) {
-               if (!ssid->disabled) {
-@@ -154,6 +166,10 @@ static void wpa_supplicant_scan(void *el
-               return;
-       }
-+      if (scan_ssid_all && !ssid) {
-+              ssid = wpa_s->conf->ssid;
-+      }
-+
-       wpa_printf(MSG_DEBUG, "Starting AP scan (%s SSID)",
-                  ssid ? "specific": "broadcast");
-       if (ssid) {
diff --git a/package/wpa_supplicant/patches/130-scanning.patch b/package/wpa_supplicant/patches/130-scanning.patch
deleted file mode 100644 (file)
index aad4450..0000000
+++ /dev/null
@@ -1,175 +0,0 @@
-Add a scan result cache to improve roaming speed if the driver gave us a background scan before losing the connection.
-
---- a/wpa_supplicant/config.h
-+++ b/wpa_supplicant/config.h
-@@ -97,6 +97,12 @@ struct wpa_config {
-       int ap_scan;
-       /**
-+       * scan_cache - controls the time in seconds after the last scan results
-+       * before a new scan may be initiated
-+       */
-+      int scan_cache;
-+
-+      /**
-        * ctrl_interface - Parameters for the control interface
-        *
-        * If this is specified, %wpa_supplicant will open a control interface
---- a/wpa_supplicant/config_file.c
-+++ b/wpa_supplicant/config_file.c
-@@ -306,6 +306,13 @@ static int wpa_config_parse_int(const st
-       return 0;
- }
-+static int wpa_config_process_scan_cache(struct wpa_config *config, char *pos)
-+{
-+      config->scan_cache = atoi(pos);
-+      wpa_printf(MSG_DEBUG, "scan_cache=%d", config->scan_cache);
-+      return 0;
-+}
-+
- static int wpa_config_parse_str(const struct global_parse_data *data,
-                               struct wpa_config *config, int line,
-@@ -433,6 +440,7 @@ static const struct global_parse_data gl
- #endif /* CONFIG_CTRL_IFACE */
-       { INT_RANGE(eapol_version, 1, 2) },
-       { INT(ap_scan) },
-+      { INT(scan_cache) },
-       { INT(fast_reauth) },
- #ifdef EAP_TLS_OPENSSL
-       { STR(opensc_engine_path) },
-@@ -835,6 +843,8 @@ static void wpa_config_write_global(FILE
-               fprintf(f, "eapol_version=%d\n", config->eapol_version);
-       if (config->ap_scan != DEFAULT_AP_SCAN)
-               fprintf(f, "ap_scan=%d\n", config->ap_scan);
-+      if (config->scan_cache != 0)
-+              fprintf(f, "scan_cache=%d\n", config->scan_cache);
-       if (config->fast_reauth != DEFAULT_FAST_REAUTH)
-               fprintf(f, "fast_reauth=%d\n", config->fast_reauth);
- #ifdef EAP_TLS_OPENSSL
---- a/wpa_supplicant/events.c
-+++ b/wpa_supplicant/events.c
-@@ -541,7 +541,7 @@ wpa_supplicant_select_bss_non_wpa(struct
-                                          "BSSID mismatch");
-                               continue;
-                       }
--                      
-+
-                       if (!(ssid->key_mgmt & WPA_KEY_MGMT_NONE) &&
-                           !(ssid->key_mgmt & WPA_KEY_MGMT_WPS) &&
-                           !(ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA))
-@@ -551,7 +551,7 @@ wpa_supplicant_select_bss_non_wpa(struct
-                               continue;
-                       }
--                      if ((ssid->key_mgmt & 
-+                      if ((ssid->key_mgmt &
-                            (WPA_KEY_MGMT_IEEE8021X | WPA_KEY_MGMT_PSK |
-                             WPA_KEY_MGMT_FT_IEEE8021X | WPA_KEY_MGMT_FT_PSK |
-                             WPA_KEY_MGMT_IEEE8021X_SHA256 |
-@@ -640,6 +640,9 @@ static void wpa_supplicant_event_scan_re
-           wpa_s->disconnected)
-               return;
-+      if (wpa_s->wpa_state > WPA_ASSOCIATED)
-+              goto done;
-+
-       while (selected == NULL) {
-               for (prio = 0; prio < wpa_s->conf->num_prio; prio++) {
-                       selected = wpa_supplicant_select_bss(
-@@ -652,6 +655,7 @@ static void wpa_supplicant_event_scan_re
-                       wpa_printf(MSG_DEBUG, "No APs found - clear blacklist "
-                                  "and try again");
-                       wpa_blacklist_clear(wpa_s);
-+                      memset(&wpa_s->last_scan_results, 0, sizeof(wpa_s->last_scan_results));
-                       wpa_s->blacklist_cleared++;
-               } else if (selected == NULL) {
-                       break;
-@@ -687,10 +691,12 @@ static void wpa_supplicant_event_scan_re
-               rsn_preauth_scan_results(wpa_s->wpa, wpa_s->scan_res);
-       } else {
-               wpa_printf(MSG_DEBUG, "No suitable AP found.");
--              timeout = 5;
-+              timeout = 0;
-               goto req_scan;
-       }
-+done:
-+      os_get_time(&wpa_s->last_scan_results);
-       return;
- req_scan:
-@@ -894,6 +900,9 @@ static void wpa_supplicant_event_disasso
-       }
-       if (wpa_s->wpa_state >= WPA_ASSOCIATED)
-               wpa_supplicant_req_scan(wpa_s, 0, 100000);
-+      else if (wpa_s->wpa_state == WPA_ASSOCIATING)
-+              wpa_supplicant_req_auth_timeout(wpa_s, 0, 100000);
-+
-       bssid = wpa_s->bssid;
-       if (is_zero_ether_addr(bssid))
-               bssid = wpa_s->pending_bssid;
---- a/wpa_supplicant/wpa_supplicant_i.h
-+++ b/wpa_supplicant/wpa_supplicant_i.h
-@@ -350,6 +350,7 @@ struct wpa_supplicant {
-       struct wpa_client_mlme mlme;
-       int use_client_mlme;
-       int driver_4way_handshake;
-+      struct os_time last_scan_results;
-       int pending_mic_error_report;
-       int pending_mic_error_pairwise;
-@@ -405,6 +406,7 @@ int wpa_supplicant_scard_init(struct wpa
- /* scan.c */
- void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec);
-+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s);
- void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s);
- /* events.c */
---- a/wpa_supplicant/scan.c
-+++ b/wpa_supplicant/scan.c
-@@ -40,6 +40,18 @@ static void wpa_supplicant_gen_assoc_eve
-       wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data);
- }
-+int wpa_supplicant_may_scan(struct wpa_supplicant *wpa_s)
-+{
-+      struct os_time time;
-+
-+      if (wpa_s->conf->scan_cache > 0) {
-+              os_get_time(&time);
-+              time.sec -= wpa_s->conf->scan_cache;
-+              if (os_time_before(&time, &wpa_s->last_scan_results))
-+                      return 0;
-+      }
-+      return 1;
-+}
- #ifdef CONFIG_WPS
- static int wpas_wps_in_use(struct wpa_config *conf,
-@@ -183,8 +195,9 @@ static void wpa_supplicant_scan(void *el
-       wps = wpas_wps_in_use(wpa_s->conf, &req_type);
- #endif /* CONFIG_WPS */
--      if (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 &&
--          !wpa_s->use_client_mlme && wps != 2) {
-+      if (!wpa_supplicant_may_scan(wpa_s) ||
-+          (wpa_s->scan_res_tried == 0 && wpa_s->conf->ap_scan == 1 &&
-+          !wpa_s->use_client_mlme && wps != 2)) {
-               wpa_s->scan_res_tried++;
-               wpa_s->scan_req = scan_req;
-               wpa_printf(MSG_DEBUG, "Trying to get current scan results "
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1491,6 +1491,9 @@ void wpa_supplicant_rx_eapol(void *ctx, 
- {
-       struct wpa_supplicant *wpa_s = ctx;
-+      if (wpa_s->wpa_state < WPA_ASSOCIATING)
-+              return;
-+
-       wpa_printf(MSG_DEBUG, "RX EAPOL from " MACSTR, MAC2STR(src_addr));
-       wpa_hexdump(MSG_MSGDUMP, "RX EAPOL", buf, len);
diff --git a/package/wpa_supplicant/patches/140-quality.patch b/package/wpa_supplicant/patches/140-quality.patch
deleted file mode 100644 (file)
index edb0b26..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/wpa_supplicant/wpa_supplicant.c
-+++ b/wpa_supplicant/wpa_supplicant.c
-@@ -1248,7 +1248,7 @@ static int wpa_supplicant_get_scan_resul
- {
- #define SCAN_AP_LIMIT 128
-       struct wpa_scan_result *results;
--      int num, i;
-+      int num, i, j;
-       struct wpa_scan_results *res;
-       results = os_malloc(SCAN_AP_LIMIT * sizeof(struct wpa_scan_result));
-@@ -1345,6 +1345,21 @@ static int wpa_supplicant_get_scan_resul
-               res->res[res->num++] = r;
-       }
-+      /* sort scan results by quality */
-+      for(i = 0; i < num - 1; i++) {
-+              for(j = i + 1; j < num; j++) {
-+                      struct wpa_scan_result tmp;
-+
-+                      if (results[i].qual > results[j].qual)
-+                              continue;
-+
-+                      os_memcpy(&tmp, &results[i], sizeof(tmp));
-+                      os_memcpy(&results[i], &results[j], sizeof(tmp));
-+                      os_memcpy(&results[j], &tmp, sizeof(tmp));
-+              }
-+      }
-+
-+
-       os_free(results);
-       wpa_s->scan_res = res;
diff --git a/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch b/package/wpa_supplicant/patches/150-Remove-PS3-gelic-legacy-wpa-support.patch
deleted file mode 100644 (file)
index 94559f1..0000000
+++ /dev/null
@@ -1,251 +0,0 @@
-From 67441c596f016f69c230eaa31ecb2272c6cbf4bf Mon Sep 17 00:00:00 2001
-From: Hamish Guthrie <hamish.guthrie@sonycom.com>
-Date: Wed, 6 Jan 2010 10:00:22 +0100
-Subject: [PATCH] Remove PS3 gelic legacy wpa support
-
-The ps3 wireless driver now supports wireless extensions. There is dedicated support code in wpa_supplicant for the old gelic wireless driver. The current gelic driver retains the old API with CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE, which is being removed from the driver.
-
-Signed-off-by: Hamish Guthrie <hamish.guthrie@sonycom.com>
----
- src/drivers/driver_ps3.c |  186 ----------------------------------------------
- src/drivers/drivers.c    |    6 --
- wpa_supplicant/Makefile  |    6 --
- 3 files changed, 0 insertions(+), 198 deletions(-)
- delete mode 100644 src/drivers/driver_ps3.c
-
-diff --git a/src/drivers/driver_ps3.c b/src/drivers/driver_ps3.c
-deleted file mode 100644
-index fde3425..0000000
---- a/src/drivers/driver_ps3.c
-+++ /dev/null
-@@ -1,186 +0,0 @@
--/*
-- * WPA Supplicant - PS3 Linux wireless extension driver interface
-- * Copyright 2007, 2008 Sony Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- *
-- * Alternatively, this software may be distributed under the terms of BSD
-- * license.
-- *
-- * See README and COPYING for more details.
-- */
--
--#include "includes.h"
--#include <sys/ioctl.h>
--#include "wireless_copy.h"
--#include "common.h"
--#include "wpa_common.h"
--#include "driver.h"
--#include "eloop.h"
--#include "driver_wext.h"
--#include "ieee802_11_defs.h"
--
--static int wpa_driver_ps3_set_wpa_key(struct wpa_driver_wext_data *drv,
--                              struct wpa_driver_associate_params *params)
--{
--      int ret, i;
--      struct iwreq iwr;
--      char *buf, *str;
--
--      if (!params->psk && !params->passphrase) {
--              wpa_printf(MSG_INFO, "%s:no PSK error", __func__);
--              return -EINVAL;
--      }
--
--      os_memset(&iwr, 0, sizeof(iwr));
--      if (params->psk) {
--              /* includes null */
--              iwr.u.data.length = PMK_LEN * 2 + 1;
--              buf = os_malloc(iwr.u.data.length);
--              if (!buf)
--                      return -ENOMEM;
--              str = buf;
--              for (i = 0; i < PMK_LEN; i++) {
--                      str += snprintf(str, iwr.u.data.length - (str - buf),
--                                      "%02x", params->psk[i]);
--              }
--      } else if (params->passphrase) {
--              /* including quotations and null */
--              iwr.u.data.length = strlen(params->passphrase) + 3;
--              buf = os_malloc(iwr.u.data.length);
--              if (!buf)
--                      return -ENOMEM;
--              buf[0] = '"';
--              os_memcpy(buf + 1, params->passphrase, iwr.u.data.length - 3);
--              buf[iwr.u.data.length - 2] = '"';
--              buf[iwr.u.data.length - 1] = '\0';
--      } else
--              return -EINVAL;
--      iwr.u.data.pointer = (caddr_t) buf;
--      os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
--      ret = ioctl(drv->ioctl_sock, SIOCIWFIRSTPRIV, &iwr);
--      os_free(buf);
--
--      return ret;
--}
--
--static int wpa_driver_ps3_set_wep_keys(struct wpa_driver_wext_data *drv,
--                              struct wpa_driver_associate_params *params)
--{
--      int ret, i;
--      struct iwreq iwr;
--
--      for (i = 0; i < 4; i++) {
--              os_memset(&iwr, 0, sizeof(iwr));
--              os_strlcpy(iwr.ifr_name, drv->ifname, IFNAMSIZ);
--              iwr.u.encoding.flags = i + 1;
--              if (params->wep_key_len[i]) {
--                      iwr.u.encoding.pointer = (caddr_t) params->wep_key[i];
--                      iwr.u.encoding.length = params->wep_key_len[i];
--              } else
--                      iwr.u.encoding.flags = IW_ENCODE_NOKEY |
--                              IW_ENCODE_DISABLED;
--
--              if (ioctl(drv->ioctl_sock, SIOCSIWENCODE, &iwr) < 0) {
--                      perror("ioctl[SIOCSIWENCODE]");
--                      ret = -1;
--              }
--      }
--      return ret;
--}
--
--static int wpa_driver_ps3_associate(void *priv,
--                                  struct wpa_driver_associate_params *params)
--{
--      struct wpa_driver_wext_data *drv = priv;
--      int ret, value;
--
--      wpa_printf(MSG_DEBUG, "%s: <-", __func__);
--
--      /* clear BSSID */
--      if (!params->bssid &&
--          wpa_driver_wext_set_bssid(drv, NULL) < 0)
--              ret = -1;
--
--      if (wpa_driver_wext_set_mode(drv, params->mode) < 0)
--              ret = -1;
--
--      if (params->wpa_ie == NULL || params->wpa_ie_len == 0)
--              value = IW_AUTH_WPA_VERSION_DISABLED;
--      else if (params->wpa_ie[0] == WLAN_EID_RSN)
--              value = IW_AUTH_WPA_VERSION_WPA2;
--      else
--              value = IW_AUTH_WPA_VERSION_WPA;
--      if (wpa_driver_wext_set_auth_param(drv,
--                                         IW_AUTH_WPA_VERSION, value) < 0)
--              ret = -1;
--      value = wpa_driver_wext_cipher2wext(params->pairwise_suite);
--      if (wpa_driver_wext_set_auth_param(drv,
--                                         IW_AUTH_CIPHER_PAIRWISE, value) < 0)
--              ret = -1;
--      value = wpa_driver_wext_cipher2wext(params->group_suite);
--      if (wpa_driver_wext_set_auth_param(drv,
--                                         IW_AUTH_CIPHER_GROUP, value) < 0)
--              ret = -1;
--      value = wpa_driver_wext_keymgmt2wext(params->key_mgmt_suite);
--      if (wpa_driver_wext_set_auth_param(drv, IW_AUTH_KEY_MGMT, value) < 0)
--              ret = -1;
--
--      /* set selected BSSID */
--      if (params->bssid &&
--          wpa_driver_wext_set_bssid(drv, params->bssid) < 0)
--              ret = -1;
--
--      switch (params->group_suite) {
--      case CIPHER_NONE:
--              ret = 0;
--              break;
--      case CIPHER_WEP40:
--      case CIPHER_WEP104:
--              ret = wpa_driver_ps3_set_wep_keys(drv, params);
--              break;
--      case CIPHER_TKIP:
--      case CIPHER_CCMP:
--              ret = wpa_driver_ps3_set_wpa_key(drv, params);
--              break;
--      }
--
--      /* start to associate */
--      ret = wpa_driver_wext_set_ssid(drv, params->ssid, params->ssid_len);
--
--      wpa_printf(MSG_DEBUG, "%s: ->", __func__);
--
--      return ret;
--}
--
--static int wpa_driver_ps3_get_capa(void *priv, struct wpa_driver_capa *capa)
--{
--      int ret;
--      wpa_printf(MSG_DEBUG, "%s:<-", __func__);
--
--      ret = wpa_driver_wext_get_capa(priv, capa);
--      if (ret) {
--              wpa_printf(MSG_INFO, "%s: base wext returns error %d",
--                         __func__, ret);
--              return ret;
--      }
--      /* PS3 hypervisor does association and 4way handshake by itself */
--      capa->flags |= WPA_DRIVER_FLAGS_4WAY_HANDSHAKE;
--      wpa_printf(MSG_DEBUG, "%s:->", __func__);
--      return 0;
--}
--
--const struct wpa_driver_ops wpa_driver_ps3_ops = {
--      .name = "ps3",
--      .desc = "PLAYSTATION3 Linux wireless extension driver",
--      .get_bssid = wpa_driver_wext_get_bssid,
--      .get_ssid = wpa_driver_wext_get_ssid,
--      .scan = wpa_driver_wext_scan,
--      .get_scan_results2 = wpa_driver_wext_get_scan_results,
--      .associate = wpa_driver_ps3_associate, /* PS3 */
--      .init = wpa_driver_wext_init,
--      .deinit = wpa_driver_wext_deinit,
--      .get_capa = wpa_driver_ps3_get_capa, /* PS3 */
--};
-diff --git a/src/drivers/drivers.c b/src/drivers/drivers.c
-index d278797..7e7d720 100644
---- a/src/drivers/drivers.c
-+++ b/src/drivers/drivers.c
-@@ -64,9 +64,6 @@ extern struct wpa_driver_ops wpa_driver_ralink_ops; /* driver_ralink.c */
- #ifdef CONFIG_DRIVER_OSX
- extern struct wpa_driver_ops wpa_driver_osx_ops; /* driver_osx.m */
- #endif /* CONFIG_DRIVER_OSX */
--#ifdef CONFIG_DRIVER_PS3
--extern struct wpa_driver_ops wpa_driver_ps3_ops; /* driver_ps3.c */
--#endif /* CONFIG_DRIVER_PS3 */
- #ifdef CONFIG_DRIVER_IPHONE
- extern struct wpa_driver_ops wpa_driver_iphone_ops; /* driver_iphone.m */
- #endif /* CONFIG_DRIVER_IPHONE */
-@@ -126,9 +123,6 @@ struct wpa_driver_ops *wpa_supplicant_drivers[] =
- #ifdef CONFIG_DRIVER_OSX
-       &wpa_driver_osx_ops,
- #endif /* CONFIG_DRIVER_OSX */
--#ifdef CONFIG_DRIVER_PS3
--      &wpa_driver_ps3_ops,
--#endif /* CONFIG_DRIVER_PS3 */
- #ifdef CONFIG_DRIVER_IPHONE
-       &wpa_driver_iphone_ops,
- #endif /* CONFIG_DRIVER_IPHONE */
-diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
-index 45d6ada..f131e92 100644
---- a/wpa_supplicant/Makefile
-+++ b/wpa_supplicant/Makefile
-@@ -226,12 +226,6 @@ LDFLAGS += -framework CoreFoundation
- LDFLAGS += -F/System/Library/PrivateFrameworks -framework Apple80211
- endif
--ifdef CONFIG_DRIVER_PS3
--CFLAGS += -DCONFIG_DRIVER_PS3 -m64
--OBJS_d += ../src/drivers/driver_ps3.o
--LDFLAGS += -m64
--endif
--
- ifdef CONFIG_DRIVER_IPHONE
- CFLAGS += -DCONFIG_DRIVER_IPHONE
- OBJS_d += ../src/drivers/driver_iphone.o
--- 
-1.6.2.4
-