+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_ADM6996_PHY=y
-# CONFIG_ALCHEMY_GPIO_INDIRECT is not set
-CONFIG_AR7=y
-CONFIG_AR7_GPIO=y
-CONFIG_AR7_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-# CONFIG_BCM47XX is not set
-# CONFIG_BCM63XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_BOOT_ELF32=y
-# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
-# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CPMAC=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_CAVIUM_OCTEON is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2E is not set
-# CONFIG_CPU_LOONGSON2F is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-# CONFIG_DEBUG_ZBOOT is not set
-CONFIG_DECOMPRESS_LZMA=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
-# CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_GPIOLIB=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_KERNEL_BZIP2=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_RANDOM=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP17XX_PHY=y
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_LOONGSON_MC146818 is not set
-CONFIG_LOONGSON_UART_BASE=y
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_LOONGSON is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR7_PARTS=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MVSWITCH_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NO_EXCEPT_FILL=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_POWERTV is not set
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SCSI_MOD=y
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-CONFIG_SYS_SUPPORTS_ZBOOT=y
-CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y
-# CONFIG_TINY_RCU is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_TREE_RCU=y
-CONFIG_VLYNQ=y
-# CONFIG_VLYNQ_DEBUG is not set
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-commit 3e9957b4866f3767f19bf0e543b322ad7906c564
-Author: Florian Fainelli <florian@openwrt.org>
-Date: Fri May 13 17:41:21 2011 +0200
-
- MIPS: AR7: Fix GPIO register size for Titan variant.
-
- The 'size' variable contains the correct register size for both AR7
- and Titan, but we never used it to ioremap the correct register size.
- This problem only shows up on Titan.
-
- [ralf@linux-mips.org: Fixed the fix. The original patch as in patchwork
- recognizes the problem correctly then fails to fix it ...]
-
- Reported-by: Alexander Clouter <alex@digriz.org.uk>
- Signed-off-by: Florian Fainelli <florian@openwrt.org>
- Patchwork: https://patchwork.linux-mips.org/patch/2380/
- Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
-
-diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c
-index 425dfa5..bb571bc 100644
---- a/arch/mips/ar7/gpio.c
-+++ b/arch/mips/ar7/gpio.c
-@@ -325,9 +325,7 @@ int __init ar7_gpio_init(void)
- size = 0x1f;
- }
-
-- gpch->regs = ioremap_nocache(AR7_REGS_GPIO,
-- AR7_REGS_GPIO + 0x10);
--
-+ gpch->regs = ioremap_nocache(AR7_REGS_GPIO, size);
- if (!gpch->regs) {
- printk(KERN_ERR "%s: failed to ioremap regs\n",
- gpch->chip.label);
+++ /dev/null
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -79,7 +79,7 @@ static const char *rom_probe_types[] = {
- "map_rom",
- NULL };
- #ifdef CONFIG_MTD_PARTITIONS
--static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
- #endif
-
- static int physmap_flash_probe(struct platform_device *dev)
+++ /dev/null
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -990,6 +990,15 @@ config MWAVE
- To compile this driver as a module, choose M here: the
- module will be called mwave.
-
-+config AR7_GPIO
-+ tristate "TI AR7 GPIO Support"
-+ depends on AR7
-+ help
-+ Give userspace access to the GPIO pins on the Texas Instruments AR7
-+ processors.
-+
-+ If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
- tristate "NatSemi SCx200 GPIO Support"
- depends on SCx200
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -94,6 +94,7 @@ obj-$(CONFIG_HW_RANDOM) += hw_random/
- obj-$(CONFIG_PPDEV) += ppdev.o
- obj-$(CONFIG_NWBUTTON) += nwbutton.o
- obj-$(CONFIG_NWFLASH) += nwflash.o
-+obj-$(CONFIG_AR7_GPIO) += ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO) += scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO) += pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO) += nsc_gpio.o
+++ /dev/null
---- a/drivers/vlynq/vlynq.c
-+++ b/drivers/vlynq/vlynq.c
-@@ -515,9 +515,14 @@ static int __vlynq_enable_device(struct
- !__vlynq_try_external(dev))
- return 0;
- } else {
-- if (!__vlynq_try_external(dev) ||
-- !__vlynq_try_local(dev) ||
-- !__vlynq_try_remote(dev))
-+ /* XXX: I don't really know what difference it makes, if the order
-+ * of the following calls is changed, but at least in this order
-+ * my fritzbox doesn't hang at startup as in
-+ * https://dev.openwrt.org/ticket/7324
-+ */
-+ if (!__vlynq_try_remote(dev) ||
-+ !__vlynq_try_local(dev) ||
-+ !__vlynq_try_external(dev))
- return 0;
- }
- break;
+++ /dev/null
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -302,6 +302,13 @@ static const struct serial8250_config ua
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
- .flags = UART_CAP_FIFO | UART_CAP_AFE,
- },
-+ [PORT_AR7] = {
-+ .name = "TI-AR7",
-+ .fifo_size = 16,
-+ .tx_loadsz = 16,
-+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
-+ .flags = UART_CAP_FIFO | UART_CAP_AFE,
-+ },
- };
-
- #if defined(CONFIG_MIPS_ALCHEMY)
-@@ -2773,7 +2780,11 @@ static void serial8250_console_putchar(s
- {
- struct uart_8250_port *up = (struct uart_8250_port *)port;
-
-+#ifdef CONFIG_AR7
-+ wait_for_xmitr(up, BOTH_EMPTY);
-+#else
- wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
- serial_out(up, UART_TX, ch);
- }
-
+++ /dev/null
---- a/drivers/mtd/ar7part.c
-+++ b/drivers/mtd/ar7part.c
-@@ -27,12 +27,14 @@
- #include <linux/mtd/partitions.h>
- #include <linux/bootmem.h>
- #include <linux/magic.h>
-+#include <asm/mach-ar7/prom.h>
-
- #define AR7_PARTS 4
- #define ROOT_OFFSET 0xe0000
-
- #define LOADER_MAGIC1 le32_to_cpu(0xfeedfa42)
- #define LOADER_MAGIC2 le32_to_cpu(0xfeed1281)
-+#define LOADER_MAGIC3 le32_to_cpu(0x434d4d4c)
-
- #ifndef SQUASHFS_MAGIC
- #define SQUASHFS_MAGIC 0x73717368
-@@ -44,6 +46,10 @@ struct ar7_bin_rec {
- unsigned int address;
- };
-
-+int create_titan_partitions(struct mtd_info *master,
-+ struct mtd_partition **pparts,
-+ unsigned long origin);
-+
- static int create_mtd_partitions(struct mtd_info *master,
- struct mtd_partition **pparts,
- unsigned long origin)
-@@ -57,6 +63,16 @@ static int create_mtd_partitions(struct
- int retries = 10;
- struct mtd_partition *ar7_parts;
-
-+ const char *prod_id ;
-+ prod_id = prom_getenv("ProductID");
-+ if(prod_id &&
-+ (strcmp(prod_id, "CYWL")==0 ||
-+ strcmp(prod_id, "CYWM")==0 ||
-+ strcmp(prod_id, "CYLM")==0 ||
-+ strcmp(prod_id, "CYLL")==0)){
-+ return create_titan_partitions(master, pparts, origin);
-+ }
-+
- ar7_parts = kzalloc(sizeof(*ar7_parts) * AR7_PARTS, GFP_KERNEL);
- if (!ar7_parts)
- return -ENOMEM;
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
-+obj-$(CONFIG_MTD_AR7_PARTS) += titanpart.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
+++ /dev/null
---- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -1155,6 +1155,8 @@ static int __devinit cpmac_probe(struct
- goto fail;
- }
-
-+ ar7_device_reset(pdata->reset_bit);
-+
- dev->irq = platform_get_irq_byname(pdev, "irq");
-
- dev->netdev_ops = &cpmac_netdev_ops;
-@@ -1231,7 +1233,7 @@ int __devinit cpmac_init(void)
- cpmac_mii->reset = cpmac_mdio_reset;
- cpmac_mii->irq = mii_irqs;
-
-- cpmac_mii->priv = ioremap(AR7_REGS_MDIO, 256);
-+ cpmac_mii->priv = ioremap(ar7_is_titan() ? TITAN_REGS_MDIO : AR7_REGS_MDIO, 256);
-
- if (!cpmac_mii->priv) {
- printk(KERN_ERR "Can't ioremap mdio registers\n");
-@@ -1242,10 +1244,16 @@ int __devinit cpmac_init(void)
- #warning FIXME: unhardcode gpio&reset bits
- ar7_gpio_disable(26);
- ar7_gpio_disable(27);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+
-+ if (!ar7_is_titan()) {
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
-+ ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
-+ }
- ar7_device_reset(AR7_RESET_BIT_EPHY);
-
-+ if (ar7_is_titan())
-+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+
- cpmac_mii->reset(cpmac_mii);
-
- for (i = 0; i < 300; i++)
-@@ -1260,7 +1268,8 @@ int __devinit cpmac_init(void)
- mask = 0;
- }
-
-- cpmac_mii->phy_mask = ~(mask | 0x80000000);
-+ cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
-+ ~(mask | 0x80000000);
- snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
-
- res = mdiobus_register(cpmac_mii);
+++ /dev/null
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -33,7 +33,6 @@
- #include <linux/string.h>
- #include <linux/etherdevice.h>
- #include <linux/phy.h>
--#include <linux/phy_fixed.h>
- #include <linux/gpio.h>
- #include <linux/clk.h>
-
-@@ -248,12 +247,6 @@ static struct resource cpmac_high_res[]
- },
- };
-
--static struct fixed_phy_status fixed_phy_status __initdata = {
-- .link = 1,
-- .speed = 100,
-- .duplex = 1,
--};
--
- static struct plat_cpmac_data cpmac_low_data = {
- .reset_bit = 17,
- .power_bit = 20,
-@@ -643,26 +636,18 @@ static int __init ar7_register_devices(v
- }
-
- if (ar7_has_high_cpmac()) {
-- res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status);
-- if (!res) {
-- cpmac_get_mac(1, cpmac_high_data.dev_addr);
--
-- res = platform_device_register(&cpmac_high);
-- if (res)
-- pr_warning("unable to register cpmac-high: %d\n", res);
-- } else
-- pr_warning("unable to add cpmac-high phy: %d\n", res);
-- } else
-- cpmac_low_data.phy_mask = 0xffffffff;
-+ cpmac_get_mac(1, cpmac_high_data.dev_addr);
-
-- res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status);
-- if (!res) {
-- cpmac_get_mac(0, cpmac_low_data.dev_addr);
-- res = platform_device_register(&cpmac_low);
-+ res = platform_device_register(&cpmac_high);
- if (res)
-- pr_warning("unable to register cpmac-low: %d\n", res);
-+ pr_warning("unable to register cpmac-high: %d\n", res);
- } else
-- pr_warning("unable to add cpmac-low phy: %d\n", res);
-+ cpmac_low_data.phy_mask = 0xffffffff;
-+
-+ cpmac_get_mac(0, cpmac_low_data.dev_addr);
-+ res = platform_device_register(&cpmac_low);
-+ if (res)
-+ pr_warning("unable to register cpmac-low: %d\n", res);
-
- detect_leds();
- res = platform_device_register(&ar7_gpio_leds);
-@@ -675,8 +660,10 @@ static int __init ar7_register_devices(v
-
- /* Register watchdog only if enabled in hardware */
- bootcr = ioremap_nocache(AR7_REGS_DCL, 4);
-- val = readl(bootcr);
-- iounmap(bootcr);
-+ if (bootcr) {
-+ val = readl(bootcr);
-+ iounmap(bootcr);
-+ }
- if (val & AR7_WDT_HW_ENA) {
- if (ar7_has_high_vlynq())
- ar7_wdt_res.start = UR8_REGS_WDT;
---- a/arch/mips/include/asm/mach-ar7/ar7.h
-+++ b/arch/mips/include/asm/mach-ar7/ar7.h
-@@ -42,6 +42,7 @@
- #define AR7_REGS_PINSEL (AR7_REGS_BASE + 0x160C)
- #define AR7_REGS_VLYNQ0 (AR7_REGS_BASE + 0x1800)
- #define AR7_REGS_DCL (AR7_REGS_BASE + 0x1a00)
-+#define AR7_REGS_MII (AR7_REGS_BASE + 0x1a08)
- #define AR7_REGS_VLYNQ1 (AR7_REGS_BASE + 0x1c00)
- #define AR7_REGS_MDIO (AR7_REGS_BASE + 0x1e00)
- #define AR7_REGS_IRQ (AR7_REGS_BASE + 0x2400)
---- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -34,7 +34,6 @@
- #include <linux/skbuff.h>
- #include <linux/mii.h>
- #include <linux/phy.h>
--#include <linux/phy_fixed.h>
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/clk.h>
-@@ -47,14 +46,11 @@ MODULE_LICENSE("GPL");
- MODULE_ALIAS("platform:cpmac");
-
- static int debug_level = 8;
--static int dumb_switch;
-
--/* Next 2 are only used in cpmac_probe, so it's pointless to change them */
-+/* Next is only used in cpmac_probe, so it's pointless to change them */
- module_param(debug_level, int, 0444);
--module_param(dumb_switch, int, 0444);
-
- MODULE_PARM_DESC(debug_level, "Number of NETIF_MSG bits to enable");
--MODULE_PARM_DESC(dumb_switch, "Assume switch is not connected to MDIO bus");
-
- #define CPMAC_VERSION "0.5.2"
- /* frame size + 802.1q tag + FCS size */
-@@ -673,9 +669,8 @@ static void cpmac_hw_start(struct net_de
- for (i = 0; i < 8; i++)
- cpmac_write(priv->regs, CPMAC_MAC_ADDR_LO(i), dev->dev_addr[5]);
- cpmac_write(priv->regs, CPMAC_MAC_ADDR_MID, dev->dev_addr[4]);
-- cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, dev->dev_addr[0] |
-- (dev->dev_addr[1] << 8) | (dev->dev_addr[2] << 16) |
-- (dev->dev_addr[3] << 24));
-+ cpmac_write(priv->regs, CPMAC_MAC_ADDR_HI, be32_to_cpu(*(u32 *)
-+ dev->dev_addr));
- cpmac_write(priv->regs, CPMAC_MAX_LENGTH, CPMAC_SKB_SIZE);
- cpmac_write(priv->regs, CPMAC_UNICAST_CLEAR, 0xff);
- cpmac_write(priv->regs, CPMAC_RX_INT_CLEAR, 0xff);
-@@ -1107,8 +1102,6 @@ static const struct net_device_ops cpmac
- .ndo_set_mac_address = eth_mac_addr,
- };
-
--static int external_switch;
--
- static int __devinit cpmac_probe(struct platform_device *pdev)
- {
- int rc, phy_id;
-@@ -1120,25 +1113,18 @@ static int __devinit cpmac_probe(struct
-
- pdata = pdev->dev.platform_data;
-
-- if (external_switch || dumb_switch) {
-- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
-- phy_id = pdev->id;
-- } else {
-- for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-- if (!(pdata->phy_mask & (1 << phy_id)))
-- continue;
-- if (!cpmac_mii->phy_map[phy_id])
-- continue;
-- strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
-- break;
-- }
-+ for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
-+ if (!(pdata->phy_mask & (1 << phy_id)))
-+ continue;
-+ if (!cpmac_mii->phy_map[phy_id])
-+ continue;
-+ strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
-+ break;
- }
-
- if (phy_id == PHY_MAX_ADDR) {
-- dev_err(&pdev->dev, "no PHY present, falling back "
-- "to switch on MDIO bus 0\n");
-- strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
-- phy_id = pdev->id;
-+ printk(KERN_ERR "cpmac: No PHY present\n");
-+ return -ENXIO;
- }
-
- dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
-@@ -1227,6 +1213,7 @@ int __devinit cpmac_init(void)
- {
- u32 mask;
- int i, res;
-+ void __iomem *mii_reg;
-
- cpmac_mii = mdiobus_alloc();
- if (cpmac_mii == NULL)
-@@ -1250,14 +1237,14 @@ int __devinit cpmac_init(void)
- ar7_gpio_disable(26);
- ar7_gpio_disable(27);
-
-- if (!ar7_is_titan()) {
-+ if (ar7_is_titan()) {
-+ ar7_device_reset(AR7_RESET_BIT_EPHY);
-+ ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-+ } else {
-+ ar7_device_reset(AR7_RESET_BIT_EPHY);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_LO);
- ar7_device_reset(AR7_RESET_BIT_CPMAC_HI);
- }
-- ar7_device_reset(AR7_RESET_BIT_EPHY);
--
-- if (ar7_is_titan())
-- ar7_device_reset(TITAN_RESET_BIT_EPHY1);
-
- cpmac_mii->reset(cpmac_mii);
-
-@@ -1269,10 +1256,22 @@ int __devinit cpmac_init(void)
- msleep(10);
- }
-
-- mask &= 0x7fffffff;
-+ mask &= ar7_is_titan()? ~(0x80000000 | 0x40000000) : ~(0x80000000);
- if (mask & (mask - 1)) {
-- external_switch = 1;
-- mask = 0;
-+ if (!ar7_has_high_cpmac()) {
-+ if (ar7_is_titan()) {
-+ ar7_device_disable(AR7_RESET_BIT_EPHY);
-+ ar7_device_disable(TITAN_RESET_BIT_EPHY1);
-+ } else
-+ ar7_device_disable(AR7_RESET_BIT_EPHY);
-+
-+ //Titan remap might be different
-+ mii_reg = ioremap(AR7_REGS_MII, 4);
-+ if (mii_reg) {
-+ writel(readl(mii_reg) | 1, mii_reg);
-+ iounmap(mii_reg);
-+ }
-+ }
- }
-
- cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000) :
+++ /dev/null
---- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -372,6 +372,7 @@ static struct sk_buff *cpmac_rx_one(stru
- struct cpmac_desc *desc)
- {
- struct sk_buff *skb, *result = NULL;
-+ int offset;
-
- if (unlikely(netif_msg_hw(priv)))
- cpmac_dump_desc(priv->dev, desc);
-@@ -383,10 +384,15 @@ static struct sk_buff *cpmac_rx_one(stru
- return NULL;
- }
-
-- skb = netdev_alloc_skb_ip_align(priv->dev, CPMAC_SKB_SIZE);
-+ skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
- if (likely(skb)) {
-+ offset = 2;
-+ if (priv->phy) {
-+ offset += priv->phy->pkt_align;
-+ }
-+ skb_reserve(skb, offset);
-+
- skb_put(desc->skb, desc->datalen);
-- desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
- skb_checksum_none_assert(desc->skb);
- priv->dev->stats.rx_packets++;
- priv->dev->stats.rx_bytes += desc->datalen;
-@@ -458,7 +464,12 @@ static int cpmac_poll(struct napi_struct
-
- skb = cpmac_rx_one(priv, desc);
- if (likely(skb)) {
-- netif_receive_skb(skb);
-+ if (priv->phy->netif_receive_skb) {
-+ priv->phy->netif_receive_skb(skb);
-+ } else {
-+ skb->protocol = eth_type_trans(skb, priv->dev);
-+ netif_receive_skb(skb);
-+ }
- received++;
- }
- desc = desc->next;
-@@ -951,7 +962,7 @@ static void cpmac_adjust_link(struct net
-
- static int cpmac_open(struct net_device *dev)
- {
-- int i, size, res;
-+ int i, size, res, offset;
- struct cpmac_priv *priv = netdev_priv(dev);
- struct resource *mem;
- struct cpmac_desc *desc;
-@@ -990,11 +1001,17 @@ static int cpmac_open(struct net_device
-
- priv->rx_head = &priv->desc_ring[CPMAC_QUEUES];
- for (i = 0, desc = priv->rx_head; i < priv->ring_size; i++, desc++) {
-- skb = netdev_alloc_skb_ip_align(dev, CPMAC_SKB_SIZE);
-+ skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
- if (unlikely(!skb)) {
- res = -ENOMEM;
- goto fail_desc;
- }
-+ offset = 2;
-+ if (priv->phy) {
-+ offset += priv->phy->pkt_align;
-+ }
-+ skb_reserve(skb, offset);
-+
- desc->skb = skb;
- desc->data_mapping = dma_map_single(&dev->dev, skb->data,
- CPMAC_SKB_SIZE,
+++ /dev/null
---- a/arch/mips/ar7/platform.c
-+++ b/arch/mips/ar7/platform.c
-@@ -455,6 +455,40 @@ static struct gpio_led fb_fon_leds[] = {
- },
- };
-
-+static struct gpio_led gt701_leds[] = {
-+ {
-+ .name = "inetgreen",
-+ .gpio = 13,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usb",
-+ .gpio = 12,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "inetred",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "powerred",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "powergreen",
-+ .gpio = 8,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "ethernet",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+};
-+
- static struct gpio_led_platform_data ar7_led_data;
-
- static struct platform_device ar7_gpio_leds = {
-@@ -496,6 +530,9 @@ static void __init detect_leds(void)
- } else if (strstr(prid, "CYWM") || strstr(prid, "CYWL")) {
- ar7_led_data.num_leds = ARRAY_SIZE(titan_leds);
- ar7_led_data.leds = titan_leds;
-+ } else if (strstr(prid, "GT701")) {
-+ ar7_led_data.num_leds = ARRAY_SIZE(gt701_leds);
-+ ar7_led_data.leds = gt701_leds;
- }
- }
-
projects / openwrt / svn-archive / archive.git / commitdiff