Targets were build tested and patches are refreshed.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42463
ifeq ($(LINUX_VERSION),3.13.7)
LINUX_KERNEL_MD5SUM:=370adced5e5c1cb1d0d621c2dae2723f
endif
-ifeq ($(LINUX_VERSION),3.14.16)
- LINUX_KERNEL_MD5SUM:=469c879236ed694f60b81122e91ca02e
+ifeq ($(LINUX_VERSION),3.14.18)
+ LINUX_KERNEL_MD5SUM:=3b002a06d0964d8101abec768c2d4eef
endif
# disable the md5sum check for unknown kernel versions
FEATURES:=squashfs targz ext2 usb
SUBTARGETS:=legacy sama5d3
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -23,6 +23,7 @@ dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+@@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
+ dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
# sam9g45
dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
+dtb-$(CONFIG_ARCH_AT91) += lmu5000.dtb
-Index: linux-3.14.16/arch/arm/mach-at91/Kconfig.non_dt
-===================================================================
---- linux-3.14.16.orig/arch/arm/mach-at91/Kconfig.non_dt 2014-08-31 13:36:59.849640477 -0700
-+++ linux-3.14.16/arch/arm/mach-at91/Kconfig.non_dt 2014-08-31 13:36:59.845640477 -0700
-@@ -281,6 +281,12 @@
+--- a/arch/arm/mach-at91/Kconfig.non_dt
++++ b/arch/arm/mach-at91/Kconfig.non_dt
+@@ -281,6 +281,12 @@ config MACH_AT91SAM9G10EK
Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
<http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
endif
# ----------------------------------------------------------
-Index: linux-3.14.16/arch/arm/mach-at91/Makefile
-===================================================================
---- linux-3.14.16.orig/arch/arm/mach-at91/Makefile 2014-08-31 13:36:59.849640477 -0700
-+++ linux-3.14.16/arch/arm/mach-at91/Makefile 2014-08-31 13:37:27.125639720 -0700
-@@ -62,6 +62,7 @@
+--- a/arch/arm/mach-at91/Makefile
++++ b/arch/arm/mach-at91/Makefile
+@@ -62,6 +62,7 @@ obj-$(CONFIG_MACH_AT91SAM9G10EK) += boar
# AT91SAM9263 board-specific support
obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
BOARDNAME:=Atheros AR231x/AR5312
FEATURES:=squashfs low_mem
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
CPU_TYPE:=cortex-a9
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
-@@ -394,6 +394,8 @@ source "drivers/mtd/onenand/Kconfig"
+@@ -371,6 +371,8 @@ source "drivers/mtd/onenand/Kconfig"
source "drivers/mtd/lpddr/Kconfig"
SUBTARGETS:=generic mips74k legacy
MAINTAINER:=Hauke Mehrtens <hauke@hauke-m.de>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
#endif
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
-@@ -282,6 +282,7 @@ static int __init bcm47xx_register_bus_c
+@@ -286,6 +286,7 @@ static int __init bcm47xx_register_bus_c
}
bcm47xx_buttons_register();
bcm47xx_leds_register();
+#endif /* defined(CONFIG_BCM47XX_BCMA) && defined(CONFIG_HIGHMEM) */
--- a/arch/mips/bcm47xx/setup.c
+++ b/arch/mips/bcm47xx/setup.c
-@@ -227,6 +227,9 @@ void __init plat_mem_setup(void)
+@@ -231,6 +231,9 @@ void __init plat_mem_setup(void)
bcm47xx_bus_type = BCM47XX_BUS_TYPE_BCMA;
bcm47xx_register_bcma();
bcm47xx_set_system_type(bcm47xx_bus.bcma.bus.chipinfo.id);
#include <asm/bootinfo.h>
#include <asm/idle.h>
#include <asm/prom.h>
-@@ -278,6 +279,33 @@ static struct fixed_phy_status bcm47xx_f
+@@ -282,6 +283,33 @@ static struct fixed_phy_status bcm47xx_f
.duplex = DUPLEX_FULL,
};
static int __init bcm47xx_register_bus_complete(void)
{
switch (bcm47xx_bus_type) {
-@@ -297,6 +325,7 @@ static int __init bcm47xx_register_bus_c
+@@ -301,6 +329,7 @@ static int __init bcm47xx_register_bus_c
bcm47xx_workarounds();
fixed_phy_add(PHY_POLL, 0, &bcm47xx_fixed_phy_status);
+++ /dev/null
-This fixes a problem introduced in this commit:
-
-commit 87aa9f9c61ad56d505641681812e92ad976f8608
-Author: Florian Fainelli <f.fainelli@gmail.com>
-Date: Fri Dec 6 13:01:34 2013 -0800
-
- net: phy: consolidate PHY reset in phy_init_hw()
-
-The fixups are not executed before the switch gets registered but after
-the kernel searches for the right switch driver. When the search is
-executed it searches for the phy_id 0x00, because it was not fixed.
-
---- a/drivers/net/phy/phy_device.c
-+++ b/drivers/net/phy/phy_device.c
-@@ -353,6 +353,7 @@ int phy_device_register(struct phy_devic
- phydev->bus->phy_map[phydev->addr] = phydev;
-
- /* Run all of the fixups for this PHY */
-+ phy_scan_fixups(phydev);
- err = phy_init_hw(phydev);
- if (err) {
- pr_err("PHY %d failed to initialize\n", phydev->addr);
BOARDNAME:=Broadcom BCM63xx
SUBTARGETS:=generic smp
FEATURES:=squashfs usb atm pci pcmcia usbgadget
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
include $(INCLUDE_DIR)/target.mk
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
-@@ -421,6 +421,9 @@ static struct pernet_operations ip_rt_pr
+@@ -422,6 +422,9 @@ static struct pernet_operations ip_rt_pr
static int __init ip_rt_proc_init(void)
{
CPU_SUBTYPE:=neon
MAINTAINER:=Luka Perkov <luka@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
CPU_TYPE:=cortex-a7
MAINTAINER:=John Crispin <blogic@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
KERNELNAME="Image dtbs"
create mode 100644 arch/arm/boot/dts/qcom-msm8660.dtsi
create mode 100644 arch/arm/boot/dts/qcom-msm8960.dtsi
-diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
-index 68a72f5..169bad9 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -1,63 +1,6 @@
- qcom,controller-type = "pmic-arbiter";
- };
};
-diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
-new file mode 100644
-index 0000000..69d6c4e
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -0,0 +1,63 @@
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
-diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
-index 7c30de4..a58fb88 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -1,70 +1,6 @@
- qcom,controller-type = "pmic-arbiter";
- };
};
-diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
-new file mode 100644
-index 0000000..ff00282
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -0,0 +1,70 @@
+ qcom,controller-type = "pmic-arbiter";
+ };
+};
---
-1.7.10.4
-
4 files changed, 8 insertions(+), 101 deletions(-)
delete mode 100644 arch/arm/mach-msm/headsmp.S
-diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
-index 8e307a1..721f27f 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
-@@ -19,7 +19,7 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+@@ -19,7 +19,7 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
-diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
-deleted file mode 100644
-index 6c62c3f..0000000
--- a/arch/arm/mach-msm/headsmp.S
+++ /dev/null
@@ -1,39 +0,0 @@
- .align
-1: .long .
- .long pen_release
-diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
-index 326a872..cea80fc 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
-@@ -24,33 +24,10 @@ static inline void cpu_leave_lowpower(void)
+@@ -24,33 +24,10 @@ static inline void cpu_leave_lowpower(vo
static inline void platform_do_lowpower(unsigned int cpu)
{
}
/*
-diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
-index f10a1f5..3721b31 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -12,13 +12,10 @@
* Synchronise with the boot thread.
*/
spin_lock(&boot_lock);
-@@ -57,7 +47,7 @@ static void msm_secondary_init(unsigned int cpu)
+@@ -57,7 +47,7 @@ static void msm_secondary_init(unsigned
static void prepare_cold_cpu(unsigned int cpu)
{
int ret;
SCM_FLAG_COLDBOOT_CPU1);
if (ret == 0) {
void __iomem *sc1_base_ptr;
-@@ -75,7 +65,6 @@ static void prepare_cold_cpu(unsigned int cpu)
+@@ -75,7 +65,6 @@ static void prepare_cold_cpu(unsigned in
static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
static int cold_boot_done;
/* Only need to bring cpu out of reset this way once */
-@@ -91,39 +80,19 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -91,39 +80,19 @@ static int msm_boot_secondary(unsigned i
spin_lock(&boot_lock);
/*
}
/*
---
-1.7.10.4
-
4 files changed, 7 insertions(+), 53 deletions(-)
delete mode 100644 arch/arm/mach-msm/hotplug.c
-diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
-index 721f27f..8327f60 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
-@@ -18,7 +18,6 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
+@@ -18,7 +18,6 @@ obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.
CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
-diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
-index 33c7725..0a4899b 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
-@@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_caller(phys_addr_t phys_addr, size_t size,
+@@ -24,7 +24,6 @@ extern void __iomem *__msm_ioremap_calle
unsigned int mtype, void *caller);
extern struct smp_operations msm_smp_ops;
struct msm_mmc_platform_data;
-diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
-deleted file mode 100644
-index cea80fc..0000000
--- a/arch/arm/mach-msm/hotplug.c
+++ /dev/null
@@ -1,51 +0,0 @@
- */
- cpu_leave_lowpower();
-}
-diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
-index 3721b31..251a91e 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -29,6 +29,13 @@ extern void secondary_startup(void);
static inline int get_core_count(void)
{
/* 1 + the PART[1:0] field of MIDR */
---
-1.7.10.4
-
delete mode 100644 arch/arm/mach-msm/timer.c
create mode 100644 drivers/clocksource/qcom-timer.c
-diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
-index 9625cf3..3c4eca7 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -21,7 +21,7 @@ config ARCH_MSM8X60
- bool
-
endif
-diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
-index 8327f60..04b1bee 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -1,4 +1,3 @@
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
-diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
-deleted file mode 100644
-index fd16449..0000000
--- a/arch/arm/mach-msm/timer.c
+++ /dev/null
@@ -1,333 +0,0 @@
- return;
- msm_timer_init(19200000 / 4, 32, 7, false);
-}
-diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
-index cd6950f..6510ec4 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -140,3 +140,6 @@ config VF_PIT_TIMER
+
+config CLKSRC_QCOM
+ bool
-diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
-index c7ca50a..2e0c0cc 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32.o
+@@ -32,6 +32,7 @@ obj-$(CONFIG_CLKSRC_EFM32) += time-efm32
obj-$(CONFIG_CLKSRC_EXYNOS_MCT) += exynos_mct.o
obj-$(CONFIG_CLKSRC_SAMSUNG_PWM) += samsung_pwm_timer.o
obj-$(CONFIG_VF_PIT_TIMER) += vf_pit_timer.o
obj-$(CONFIG_ARM_ARCH_TIMER) += arm_arch_timer.o
obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
-diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
-new file mode 100644
-index 0000000..dca829e
--- /dev/null
+++ b/drivers/clocksource/qcom-timer.c
@@ -0,0 +1,329 @@
+ return;
+ msm_timer_init(19200000 / 4, 32, 7, false);
+}
---
-1.7.10.4
-
create mode 100644 arch/arm/mach-qcom/scm.c
create mode 100644 arch/arm/mach-qcom/scm.h
-diff --git a/MAINTAINERS b/MAINTAINERS
-index 900d98e..7d23402 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
-@@ -1168,6 +1168,14 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+@@ -1168,6 +1168,14 @@ L: linux-arm-kernel@lists.infradead.org
W: http://www.arm.linux.org.uk/
S: Maintained
ARM/RADISYS ENP2611 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 1594945..d02ce70 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -657,9 +657,8 @@ config ARCH_PXA
+@@ -658,9 +658,8 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
-@@ -1005,6 +1004,8 @@ source "arch/arm/plat-pxa/Kconfig"
+@@ -1006,6 +1005,8 @@ source "arch/arm/plat-pxa/Kconfig"
source "arch/arm/mach-mmp/Kconfig"
source "arch/arm/mach-realview/Kconfig"
source "arch/arm/mach-rockchip/Kconfig"
-diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
-index 0531da8..4491c7b 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -956,7 +956,7 @@ config DEBUG_STI_UART
config DEBUG_LL_INCLUDE
string
-diff --git a/arch/arm/Makefile b/arch/arm/Makefile
-index 08a9ef5..51e5bed 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
-@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2
+@@ -185,6 +185,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS) += omap
machine-$(CONFIG_ARCH_ORION5X) += orion5x
machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell
machine-$(CONFIG_ARCH_PXA) += pxa
machine-$(CONFIG_ARCH_REALVIEW) += realview
machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip
machine-$(CONFIG_ARCH_RPC) += rpc
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 0320303..4a89023 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -119,9 +119,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \
+@@ -119,9 +119,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
-@@ -234,6 +231,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+@@ -234,6 +231,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
-diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
-index 3c4eca7..a7f959e 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -1,50 +1,9 @@
config MACH_HALIBUT
depends on ARCH_MSM
-diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
-index 04b1bee..27c078a 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -13,17 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
-obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
-diff --git a/arch/arm/mach-msm/board-dt.c b/arch/arm/mach-msm/board-dt.c
-deleted file mode 100644
-index 1f11d93..0000000
--- a/arch/arm/mach-msm/board-dt.c
+++ /dev/null
@@ -1,41 +0,0 @@
-DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
- .dt_compat = apq8074_dt_match,
-MACHINE_END
-diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
-deleted file mode 100644
-index 251a91e..0000000
--- a/arch/arm/mach-msm/platsmp.c
+++ /dev/null
@@ -1,137 +0,0 @@
- .cpu_die = msm_cpu_die,
-#endif
-};
-diff --git a/arch/arm/mach-msm/scm-boot.c b/arch/arm/mach-msm/scm-boot.c
-deleted file mode 100644
-index 45cee3e..0000000
--- a/arch/arm/mach-msm/scm-boot.c
+++ /dev/null
@@ -1,39 +0,0 @@
- &cmd, sizeof(cmd), NULL, 0);
-}
-EXPORT_SYMBOL(scm_set_boot_addr);
-diff --git a/arch/arm/mach-msm/scm-boot.h b/arch/arm/mach-msm/scm-boot.h
-deleted file mode 100644
-index 7be32ff..0000000
--- a/arch/arm/mach-msm/scm-boot.h
+++ /dev/null
@@ -1,22 +0,0 @@
-int scm_set_boot_addr(phys_addr_t addr, int flags);
-
-#endif
-diff --git a/arch/arm/mach-msm/scm.c b/arch/arm/mach-msm/scm.c
-deleted file mode 100644
-index c536fd6..0000000
--- a/arch/arm/mach-msm/scm.c
+++ /dev/null
@@ -1,299 +0,0 @@
- return version;
-}
-EXPORT_SYMBOL(scm_get_version);
-diff --git a/arch/arm/mach-msm/scm.h b/arch/arm/mach-msm/scm.h
-deleted file mode 100644
-index 00b31ea..0000000
--- a/arch/arm/mach-msm/scm.h
+++ /dev/null
@@ -1,25 +0,0 @@
-extern u32 scm_get_version(void);
-
-#endif
-diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
-new file mode 100644
-index 0000000..a028be2
--- /dev/null
+++ b/arch/arm/mach-qcom/Kconfig
@@ -0,0 +1,33 @@
+ bool
+
+endif
-diff --git a/arch/arm/mach-qcom/Makefile b/arch/arm/mach-qcom/Makefile
-new file mode 100644
-index 0000000..8f756ae
--- /dev/null
+++ b/arch/arm/mach-qcom/Makefile
@@ -0,0 +1,5 @@
+obj-$(CONFIG_QCOM_SCM) += scm.o scm-boot.o
+
+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
-diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
-new file mode 100644
-index 0000000..4529f6b
--- /dev/null
+++ b/arch/arm/mach-qcom/board.c
@@ -0,0 +1,40 @@
+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
+ .dt_compat = apq8074_dt_match,
+MACHINE_END
-diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
-new file mode 100644
-index 0000000..67823a7
--- /dev/null
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -0,0 +1,137 @@
+ .cpu_die = msm_cpu_die,
+#endif
+};
-diff --git a/arch/arm/mach-qcom/scm-boot.c b/arch/arm/mach-qcom/scm-boot.c
-new file mode 100644
-index 0000000..45cee3e
--- /dev/null
+++ b/arch/arm/mach-qcom/scm-boot.c
@@ -0,0 +1,39 @@
+ &cmd, sizeof(cmd), NULL, 0);
+}
+EXPORT_SYMBOL(scm_set_boot_addr);
-diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
-new file mode 100644
-index 0000000..7be32ff
--- /dev/null
+++ b/arch/arm/mach-qcom/scm-boot.h
@@ -0,0 +1,22 @@
+int scm_set_boot_addr(phys_addr_t addr, int flags);
+
+#endif
-diff --git a/arch/arm/mach-qcom/scm.c b/arch/arm/mach-qcom/scm.c
-new file mode 100644
-index 0000000..c536fd6
--- /dev/null
+++ b/arch/arm/mach-qcom/scm.c
@@ -0,0 +1,299 @@
+ return version;
+}
+EXPORT_SYMBOL(scm_get_version);
-diff --git a/arch/arm/mach-qcom/scm.h b/arch/arm/mach-qcom/scm.h
-new file mode 100644
-index 0000000..00b31ea
--- /dev/null
+++ b/arch/arm/mach-qcom/scm.h
@@ -0,0 +1,25 @@
+extern u32 scm_get_version(void);
+
+#endif
---
-1.7.10.4
-
drivers/clocksource/qcom-timer.c | 23 ++++++++++++-----------
1 file changed, 12 insertions(+), 11 deletions(-)
-diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
-index dca829e..e807acf 100644
--- a/drivers/clocksource/qcom-timer.c
+++ b/drivers/clocksource/qcom-timer.c
-@@ -106,15 +106,6 @@ static notrace cycle_t msm_read_timer_count(struct clocksource *cs)
+@@ -106,15 +106,6 @@ static notrace cycle_t msm_read_timer_co
return readl_relaxed(source_base + TIMER_COUNT_VAL);
}
static void __init msm_dt_timer_init(struct device_node *np)
{
u32 freq;
-@@ -281,7 +272,7 @@ static void __init msm_dt_timer_init(struct device_node *np)
+@@ -281,7 +272,7 @@ static void __init msm_dt_timer_init(str
}
CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
u32 sts)
-@@ -301,6 +292,15 @@ static int __init msm_timer_map(phys_addr_t addr, u32 event, u32 source,
+@@ -301,6 +292,15 @@ static int __init msm_timer_map(phys_add
return 0;
}
msm_timer_init(19200000 / 4, 32, 7, false);
}
+#endif
---
-1.7.10.4
-
arch/arm/mach-qcom/platsmp.c | 22 +++++++++++-----------
2 files changed, 13 insertions(+), 13 deletions(-)
-diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
-index 4529f6b..830f69c 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -17,7 +17,7 @@
static const char * const qcom_dt_match[] __initconst = {
"qcom,msm8660-surf",
-@@ -31,7 +31,7 @@ static const char * const apq8074_dt_match[] __initconst = {
+@@ -31,7 +31,7 @@ static const char * const apq8074_dt_mat
};
DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
.dt_compat = qcom_dt_match,
MACHINE_END
-diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
-index 67823a7..9c53ea7 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -30,7 +30,7 @@ extern void secondary_startup(void);
{
/*
* Synchronise with the boot thread.
-@@ -70,7 +70,7 @@ static void prepare_cold_cpu(unsigned int cpu)
+@@ -70,7 +70,7 @@ static void prepare_cold_cpu(unsigned in
"address\n");
}
{
static int cold_boot_done;
-@@ -108,7 +108,7 @@ static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -108,7 +108,7 @@ static int msm_boot_secondary(unsigned i
* does not support the ARM SCU, so just set the possible cpu mask to
* NR_CPUS.
*/
{
unsigned int i, ncores = get_core_count();
-@@ -122,16 +122,16 @@ static void __init msm_smp_init_cpus(void)
+@@ -122,16 +122,16 @@ static void __init msm_smp_init_cpus(voi
set_cpu_possible(i, true);
}
+ .cpu_die = qcom_cpu_die,
#endif
};
---
-1.7.10.4
-
include/asm-generic/vmlinux.lds.h | 10 ++++++++++
3 files changed, 59 insertions(+)
-diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
-index 22a3b9b..772435b 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -114,6 +114,15 @@ struct smp_operations {
/*
* set platform specific SMP operations
*/
-diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c
-index f751714..c7419a5 100644
--- a/arch/arm/kernel/devtree.c
+++ b/arch/arm/kernel/devtree.c
@@ -18,6 +18,7 @@
#include <asm/cputype.h>
#include <asm/setup.h>
-@@ -63,6 +64,34 @@ void __init arm_dt_memblock_reserve(void)
+@@ -63,6 +64,34 @@ void __init arm_dt_memblock_reserve(void
}
}
if (!bootcpu_valid) {
pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
return;
-diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
-index bc2121f..bd02ca7 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
-@@ -167,6 +167,15 @@
+@@ -177,6 +177,15 @@
#define CLK_OF_TABLES()
#endif
#define KERNEL_DTB() \
STRUCT_ALIGN(); \
VMLINUX_SYMBOL(__dtb_start) = .; \
-@@ -491,6 +500,7 @@
+@@ -502,6 +511,7 @@
MEM_DISCARD(init.rodata) \
CLK_OF_TABLES() \
CLKSRC_OF_TABLES() \
KERNEL_DTB() \
IRQCHIP_OF_MATCH_TABLE()
---
-1.7.10.4
-
arch/arm/mach-qcom/platsmp.c | 118 +++++++++++++++++++++++-------------------
3 files changed, 65 insertions(+), 69 deletions(-)
-diff --git a/arch/arm/mach-msm/common.h b/arch/arm/mach-msm/common.h
-index 0a4899b..572479a 100644
--- a/arch/arm/mach-msm/common.h
+++ b/arch/arm/mach-msm/common.h
@@ -23,8 +23,6 @@ extern void msm_map_qsd8x50_io(void);
struct msm_mmc_platform_data;
extern void msm_add_devices(void);
-diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
-index 830f69c..bae617e 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -11,30 +11,16 @@
-DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
- .dt_compat = apq8074_dt_match,
-MACHINE_END
-diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
-index 9c53ea7..ec8604d 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -13,17 +13,18 @@
extern void secondary_startup(void);
-@@ -36,12 +37,6 @@ static void __ref qcom_cpu_die(unsigned int cpu)
+@@ -36,12 +37,6 @@ static void __ref qcom_cpu_die(unsigned
}
#endif
static void qcom_secondary_init(unsigned int cpu)
{
/*
-@@ -51,33 +46,41 @@ static void qcom_secondary_init(unsigned int cpu)
+@@ -51,33 +46,41 @@ static void qcom_secondary_init(unsigned
spin_unlock(&boot_lock);
}
}
/*
-@@ -99,39 +102,48 @@ static int qcom_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -99,39 +102,48 @@ static int qcom_boot_secondary(unsigned
*/
spin_unlock(&boot_lock);
- * NR_CPUS.
- */
-static void __init qcom_smp_init_cpus(void)
-+static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
- {
+-{
- unsigned int i, ncores = get_core_count();
-
- if (ncores > nr_cpu_ids) {
-
- for (i = 0; i < ncores; i++)
- set_cpu_possible(i, true);
++static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
++{
+ return qcom_boot_secondary(cpu, scss_release_secondary);
}
#endif
};
+CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
---
-1.7.10.4
-
Documentation/devicetree/bindings/arm/cpus.txt | 25 +++++++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
-diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
-index 9130435..333f4ae 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
-@@ -180,7 +180,11 @@ nodes to be present and contain the properties described below.
+@@ -180,7 +180,11 @@ nodes to be present and contain the prop
be one of:
"spin-table"
"psci"
- cpu-release-addr
Usage: required for systems that have an "enable-method"
-@@ -191,6 +195,21 @@ nodes to be present and contain the properties described below.
+@@ -191,6 +195,21 @@ nodes to be present and contain the prop
property identifying a 64-bit zero-initialised
memory location.
+--
+[1] arm/msm/qcom,saw2.txt
+[2] arm/msm/qcom,kpss-acc.txt
---
-1.7.10.4
-
1 file changed, 30 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
-diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
-new file mode 100644
-index 0000000..1333db9
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
@@ -0,0 +1,30 @@
+ reg = <0x02088000 0x1000>,
+ <0x02008000 0x1000>;
+ };
---
-1.7.10.4
-
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
-diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
-new file mode 100644
-index 0000000..1505fb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -0,0 +1,35 @@
+ compatible = "qcom,saw2";
+ reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+ };
---
-1.7.10.4
-
arch/arm/mach-qcom/scm-boot.h | 8 ++--
2 files changed, 111 insertions(+), 3 deletions(-)
-diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
-index ec8604d..cb0783f 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -26,6 +26,16 @@
extern void secondary_startup(void);
static DEFINE_SPINLOCK(boot_lock);
-@@ -71,6 +81,85 @@ static int scss_release_secondary(unsigned int cpu)
+@@ -71,6 +81,85 @@ static int scss_release_secondary(unsign
return 0;
}
static DEFINE_PER_CPU(int, cold_boot_done);
static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
-@@ -110,6 +199,11 @@ static int msm8660_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -110,6 +199,11 @@ static int msm8660_boot_secondary(unsign
return qcom_boot_secondary(cpu, scss_release_secondary);
}
static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu, map;
-@@ -117,6 +211,8 @@ static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
+@@ -117,6 +211,8 @@ static void __init qcom_smp_prepare_cpus
static const int cold_boot_flags[] = {
0,
SCM_FLAG_COLDBOOT_CPU1,
};
for_each_present_cpu(cpu) {
-@@ -147,3 +243,13 @@ static struct smp_operations smp_msm8660_ops __initdata = {
+@@ -147,3 +243,13 @@ static struct smp_operations smp_msm8660
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp, "qcom,gcc-msm8660", &smp_msm8660_ops);
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
-diff --git a/arch/arm/mach-qcom/scm-boot.h b/arch/arm/mach-qcom/scm-boot.h
-index 7be32ff..6aabb24 100644
--- a/arch/arm/mach-qcom/scm-boot.h
+++ b/arch/arm/mach-qcom/scm-boot.h
@@ -13,9 +13,11 @@
int scm_set_boot_addr(phys_addr_t addr, int flags);
---
-1.7.10.4
-
arch/arm/mach-qcom/platsmp.c | 123 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 123 insertions(+)
-diff --git a/arch/arm/mach-qcom/platsmp.c b/arch/arm/mach-qcom/platsmp.c
-index cb0783f..d690856 100644
--- a/arch/arm/mach-qcom/platsmp.c
+++ b/arch/arm/mach-qcom/platsmp.c
@@ -34,7 +34,15 @@
static DEFINE_PER_CPU(int, cold_boot_done);
static int qcom_boot_secondary(unsigned int cpu, int (*func)(unsigned int))
-@@ -204,6 +312,11 @@ static int kpssv1_boot_secondary(unsigned int cpu, struct task_struct *idle)
+@@ -204,6 +312,11 @@ static int kpssv1_boot_secondary(unsigne
return qcom_boot_secondary(cpu, kpssv1_release_secondary);
}
static void __init qcom_smp_prepare_cpus(unsigned int max_cpus)
{
int cpu, map;
-@@ -253,3 +366,13 @@ static struct smp_operations qcom_smp_kpssv1_ops __initdata = {
+@@ -253,3 +366,13 @@ static struct smp_operations qcom_smp_kp
#endif
};
CPU_METHOD_OF_DECLARE(qcom_smp_kpssv1, "qcom,kpss-acc-v1", &qcom_smp_kpssv1_ops);
+#endif
+};
+CPU_METHOD_OF_DECLARE(qcom_smp_kpssv2, "qcom,kpss-acc-v2", &qcom_smp_kpssv2_ops);
---
-1.7.10.4
-
drivers/tty/serial/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
-index a3815ea..ce9b12d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1024,7 +1024,7 @@ config SERIAL_SGI_IOC3
select SERIAL_CORE
config SERIAL_MSM_CONSOLE
---
-1.7.10.4
-
drivers/gpu/drm/msm/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/gpu/drm/msm/Kconfig b/drivers/gpu/drm/msm/Kconfig
-index c69d1e0..b698497 100644
--- a/drivers/gpu/drm/msm/Kconfig
+++ b/drivers/gpu/drm/msm/Kconfig
@@ -3,7 +3,7 @@ config DRM_MSM
select DRM_KMS_HELPER
select SHMEM
select TMPFS
---
-1.7.10.4
-
drivers/power/reset/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
-index 6d452a7..fa0e4e0 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -22,7 +22,7 @@ config POWER_RESET_GPIO
help
Power off and restart support for Qualcomm boards.
---
-1.7.10.4
-
drivers/char/hw_random/Kconfig | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
-diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
-index 2f2b084..244759b 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -342,11 +342,11 @@ config HW_RANDOM_TPM
To compile this driver as a module, choose M here. the
module will be called msm-rng.
---
-1.7.10.4
-
drivers/gpio/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 903f24d..2c38d95 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -192,7 +192,7 @@ config GPIO_MSM_V1
help
Say yes here to support the GPIO interface on ARM v7 based
Qualcomm MSM chips. Most of the pins on the MSM can be
---
-1.7.10.4
-
arch/arm/configs/multi_v7_defconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
-diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
-index ee69829..1a61bd8 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -31,6 +31,10 @@ CONFIG_SOC_OMAP5=y
CONFIG_TEGRA_IOMMU_GART=y
CONFIG_TEGRA_IOMMU_SMMU=y
CONFIG_MEMORY=y
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8974.dtsi | 69 +++++++++++++++++++++++++++++++++++
3 files changed, 145 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
-index 69d6c4e..c52a9e9 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -9,6 +9,30 @@
intc: interrupt-controller@2080000 {
compatible = "qcom,msm-8660-qgic";
interrupt-controller;
-diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
-index ff00282..02231a5 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -9,6 +9,36 @@
serial@16440000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16440000 0x1000>,
-diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
-index 9e5dadb..39eebc5 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,49 @@
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8974.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
-index 39eebc5..011eb09 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -186,5 +186,12 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8960.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
-index 02231a5..ecfba72 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -119,4 +119,11 @@
+ clock-names = "core";
+ };
};
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8974.dtsi | 5 +++++
2 files changed, 11 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
-index ecfba72..997b7b9 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -39,6 +39,12 @@
intc: interrupt-controller@2000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
-diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
-index 011eb09..f687239 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -52,6 +52,11 @@
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 14 +-------------
1 file changed, 1 insertion(+), 13 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index ef2bf31..0e43fdd 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -50,7 +50,6 @@
const struct msm_pinctrl_soc_data *soc;
void __iomem *regs;
-@@ -783,22 +781,12 @@ static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on)
+@@ -783,22 +781,12 @@ static int msm_gpio_irq_set_wake(struct
{
struct msm_pinctrl *pctrl;
unsigned long flags;
spin_unlock_irqrestore(&pctrl->lock, flags);
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 0e43fdd..e61b30a 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -857,6 +857,12 @@ static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+@@ -857,6 +857,12 @@ static void msm_gpio_irq_handler(unsigne
chained_irq_exit(chip, desc);
}
static int msm_gpio_init(struct msm_pinctrl *pctrl)
{
struct gpio_chip *chip;
-@@ -895,6 +901,7 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
+@@ -895,6 +901,7 @@ static int msm_gpio_init(struct msm_pinc
for (i = 0; i < chip->ngpio; i++) {
irq = irq_create_mapping(pctrl->domain, i);
irq_set_chip_and_handler(irq, &msm_gpio_irq_chip, handle_edge_irq);
irq_set_chip_data(irq, pctrl);
}
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index e61b30a..90ac995 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -870,10 +870,14 @@ static int msm_gpio_init(struct msm_pinctrl *pctrl)
+@@ -870,10 +870,14 @@ static int msm_gpio_init(struct msm_pinc
int ret;
int i;
int r;
chip->label = dev_name(pctrl->dev);
chip->dev = pctrl->dev;
chip->owner = THIS_MODULE;
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm8x74.c | 1 -
3 files changed, 1 insertion(+), 6 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 90ac995..4474e00 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -28,7 +28,6 @@
#include <linux/spinlock.h>
#include "core.h"
-diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
-index 206e782..8fbe9fb 100644
--- a/drivers/pinctrl/pinctrl-msm.h
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -13,10 +13,7 @@
/**
* struct msm_function - a pinmux function
-diff --git a/drivers/pinctrl/pinctrl-msm8x74.c b/drivers/pinctrl/pinctrl-msm8x74.c
-index f944bf2..bb5ded69f 100644
--- a/drivers/pinctrl/pinctrl-msm8x74.c
+++ b/drivers/pinctrl/pinctrl-msm8x74.c
@@ -15,7 +15,6 @@
#include "pinctrl-msm.h"
---
-1.7.10.4
-
drivers/pinctrl/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
-index 1e4e693..06cee01 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -224,7 +224,7 @@ config PINCTRL_MSM
select PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 4474e00..87f6c3c 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -258,8 +258,10 @@ static int msm_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
+@@ -258,8 +258,10 @@ static int msm_config_set(struct pinctrl
#define MSM_PULL_DOWN 1
#define MSM_PULL_UP 3
static int msm_config_group_get(struct pinctrl_dev *pctldev,
unsigned int group,
-@@ -296,7 +298,7 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
+@@ -296,7 +298,7 @@ static int msm_config_group_get(struct p
arg = arg == MSM_PULL_UP;
break;
case PIN_CONFIG_DRIVE_STRENGTH:
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
-@@ -349,10 +351,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+@@ -349,10 +351,10 @@ static int msm_config_group_set(struct p
break;
case PIN_CONFIG_DRIVE_STRENGTH:
/* Check for invalid values */
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
-@@ -531,7 +533,7 @@ static void msm_gpio_dbg_show_one(struct seq_file *s,
+@@ -531,7 +533,7 @@ static void msm_gpio_dbg_show_one(struct
pull = (ctl_reg >> g->pull_bit) & 3;
seq_printf(s, " %-8s: %-3s %d", g->name, is_out ? "out" : "in", func);
seq_printf(s, " %s", pulls[pull]);
}
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 16 ----------------
1 file changed, 16 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 87f6c3c..ab46e3a 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -401,8 +401,6 @@ static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+@@ -401,8 +401,6 @@ static int msm_gpio_direction_input(stru
u32 val;
g = &pctrl->soc->groups[offset];
spin_lock_irqsave(&pctrl->lock, flags);
-@@ -423,8 +421,6 @@ static int msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, in
+@@ -423,8 +421,6 @@ static int msm_gpio_direction_output(str
u32 val;
g = &pctrl->soc->groups[offset];
spin_lock_irqsave(&pctrl->lock, flags);
-@@ -451,8 +447,6 @@ static int msm_gpio_get(struct gpio_chip *chip, unsigned offset)
+@@ -451,8 +447,6 @@ static int msm_gpio_get(struct gpio_chip
u32 val;
g = &pctrl->soc->groups[offset];
val = readl(pctrl->regs + g->io_reg);
return !!(val & BIT(g->in_bit));
-@@ -466,8 +460,6 @@ static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+@@ -466,8 +460,6 @@ static void msm_gpio_set(struct gpio_chi
u32 val;
g = &pctrl->soc->groups[offset];
spin_lock_irqsave(&pctrl->lock, flags);
-@@ -616,8 +608,6 @@ static void msm_gpio_irq_mask(struct irq_data *d)
+@@ -616,8 +608,6 @@ static void msm_gpio_irq_mask(struct irq
pctrl = irq_data_get_irq_chip_data(d);
g = &pctrl->soc->groups[d->hwirq];
spin_lock_irqsave(&pctrl->lock, flags);
-@@ -639,8 +629,6 @@ static void msm_gpio_irq_unmask(struct irq_data *d)
+@@ -639,8 +629,6 @@ static void msm_gpio_irq_unmask(struct i
pctrl = irq_data_get_irq_chip_data(d);
g = &pctrl->soc->groups[d->hwirq];
spin_lock_irqsave(&pctrl->lock, flags);
-@@ -666,8 +654,6 @@ static void msm_gpio_irq_ack(struct irq_data *d)
+@@ -666,8 +654,6 @@ static void msm_gpio_irq_ack(struct irq_
pctrl = irq_data_get_irq_chip_data(d);
g = &pctrl->soc->groups[d->hwirq];
spin_lock_irqsave(&pctrl->lock, flags);
-@@ -692,8 +678,6 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+@@ -692,8 +678,6 @@ static int msm_gpio_irq_set_type(struct
pctrl = irq_data_get_irq_chip_data(d);
g = &pctrl->soc->groups[d->hwirq];
spin_lock_irqsave(&pctrl->lock, flags);
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 29 +++++------------------------
1 file changed, 5 insertions(+), 24 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index ab46e3a..91de8bc 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -200,28 +200,17 @@ static const struct pinmux_ops msm_pinmux_ops = {
+@@ -200,28 +200,17 @@ static const struct pinmux_ops msm_pinmu
static int msm_config_reg(struct msm_pinctrl *pctrl,
const struct msm_pingroup *g,
unsigned param,
*bit = g->drv_bit;
*mask = 7;
break;
-@@ -230,12 +219,6 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
+@@ -230,12 +219,6 @@ static int msm_config_reg(struct msm_pin
return -ENOTSUPP;
}
return 0;
}
-@@ -273,17 +256,16 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
+@@ -273,17 +256,16 @@ static int msm_config_group_get(struct p
unsigned mask;
unsigned arg;
unsigned bit;
arg = (val >> bit) & mask;
/* Convert register value to pinconf value */
-@@ -323,7 +305,6 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+@@ -323,7 +305,6 @@ static int msm_config_group_set(struct p
unsigned mask;
unsigned arg;
unsigned bit;
int ret;
u32 val;
int i;
-@@ -334,7 +315,7 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+@@ -334,7 +315,7 @@ static int msm_config_group_set(struct p
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
if (ret < 0)
return ret;
-@@ -369,10 +350,10 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+@@ -369,10 +350,10 @@ static int msm_config_group_set(struct p
}
spin_lock_irqsave(&pctrl->lock, flags);
spin_unlock_irqrestore(&pctrl->lock, flags);
}
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 91de8bc..19d2feb 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -214,6 +214,11 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
+@@ -214,6 +214,11 @@ static int msm_config_reg(struct msm_pin
*bit = g->drv_bit;
*mask = 7;
break;
default:
dev_err(pctrl->dev, "Invalid config param %04x\n", param);
return -ENOTSUPP;
-@@ -282,6 +287,14 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
+@@ -282,6 +287,14 @@ static int msm_config_group_get(struct p
case PIN_CONFIG_DRIVE_STRENGTH:
arg = msm_regval_to_drive(arg);
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
param);
-@@ -337,6 +350,20 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+@@ -337,6 +350,20 @@ static int msm_config_group_set(struct p
else
arg = (arg / 2) - 1;
break;
default:
dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
param);
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm8x74.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm8x74.c b/drivers/pinctrl/pinctrl-msm8x74.c
-index bb5ded69f..dde5529 100644
--- a/drivers/pinctrl/pinctrl-msm8x74.c
+++ b/drivers/pinctrl/pinctrl-msm8x74.c
@@ -405,6 +405,7 @@ enum msm8x74_functions {
MSM_MUX_blsp_uart2,
MSM_MUX_blsp_uart8,
MSM_MUX_slimbus,
-@@ -415,6 +416,9 @@ static const char * const blsp_i2c2_groups[] = { "gpio6", "gpio7" };
+@@ -415,6 +416,9 @@ static const char * const blsp_i2c2_grou
static const char * const blsp_i2c6_groups[] = { "gpio29", "gpio30" };
static const char * const blsp_i2c11_groups[] = { "gpio83", "gpio84" };
static const char * const blsp_spi1_groups[] = { "gpio0", "gpio1", "gpio2", "gpio3" };
static const char * const blsp_uart2_groups[] = { "gpio4", "gpio5" };
static const char * const blsp_uart8_groups[] = { "gpio45", "gpio46" };
static const char * const slimbus_groups[] = { "gpio70", "gpio71" };
-@@ -424,6 +428,7 @@ static const struct msm_function msm8x74_functions[] = {
+@@ -424,6 +428,7 @@ static const struct msm_function msm8x74
FUNCTION(blsp_i2c6),
FUNCTION(blsp_i2c11),
FUNCTION(blsp_spi1),
FUNCTION(blsp_uart2),
FUNCTION(blsp_uart8),
FUNCTION(slimbus),
-@@ -475,10 +480,10 @@ static const struct msm_pingroup msm8x74_groups[] = {
+@@ -475,10 +480,10 @@ static const struct msm_pingroup msm8x74
PINGROUP(42, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(43, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(44, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(49, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(50, NA, NA, NA, NA, NA, NA, NA),
PINGROUP(51, NA, NA, NA, NA, NA, NA, NA),
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 1 -
1 file changed, 1 deletion(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 19d2feb..343f421 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -215,7 +215,6 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
+@@ -215,7 +215,6 @@ static int msm_config_reg(struct msm_pin
*mask = 7;
break;
case PIN_CONFIG_OUTPUT:
*bit = g->oe_bit;
*mask = 1;
break;
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.h | 1 +
2 files changed, 6 insertions(+), 1 deletion(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 343f421..706809e 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -665,7 +665,10 @@ static void msm_gpio_irq_ack(struct irq_data *d)
+@@ -665,7 +665,10 @@ static void msm_gpio_irq_ack(struct irq_
spin_lock_irqsave(&pctrl->lock, flags);
val = readl(pctrl->regs + g->intr_status_reg);
writel(val, pctrl->regs + g->intr_status_reg);
if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
-@@ -744,6 +747,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
+@@ -744,6 +747,7 @@ static int msm_gpio_irq_set_type(struct
break;
case IRQ_TYPE_EDGE_BOTH:
val |= BIT(g->intr_detection_bit);
break;
case IRQ_TYPE_LEVEL_LOW:
break;
-diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
-index 8fbe9fb..6e26f1b 100644
--- a/drivers/pinctrl/pinctrl-msm.h
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -84,6 +84,7 @@ struct msm_pingroup {
unsigned intr_target_bit:5;
unsigned intr_raw_status_bit:5;
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm8x74.c | 3 ++-
3 files changed, 6 insertions(+), 4 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 706809e..7d67d34 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -145,12 +145,12 @@ static int msm_pinmux_enable(struct pinctrl_dev *pctldev,
+@@ -145,12 +145,12 @@ static int msm_pinmux_enable(struct pinc
if (WARN_ON(g->mux_bit < 0))
return -EINVAL;
return -EINVAL;
spin_lock_irqsave(&pctrl->lock, flags);
-diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
-index 6e26f1b..7b2a227 100644
--- a/drivers/pinctrl/pinctrl-msm.h
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -65,7 +65,8 @@ struct msm_pingroup {
s16 ctl_reg;
s16 io_reg;
-diff --git a/drivers/pinctrl/pinctrl-msm8x74.c b/drivers/pinctrl/pinctrl-msm8x74.c
-index dde5529..57766d5 100644
--- a/drivers/pinctrl/pinctrl-msm8x74.c
+++ b/drivers/pinctrl/pinctrl-msm8x74.c
-@@ -341,7 +341,7 @@ static const unsigned int sdc2_data_pins[] = { 151 };
+@@ -341,7 +341,7 @@ static const unsigned int sdc2_data_pins
.name = "gpio" #id, \
.pins = gpio##id##_pins, \
.npins = ARRAY_SIZE(gpio##id##_pins), \
MSM_MUX_NA, /* gpio mode */ \
MSM_MUX_##f1, \
MSM_MUX_##f2, \
-@@ -351,6 +351,7 @@ static const unsigned int sdc2_data_pins[] = { 151 };
+@@ -351,6 +351,7 @@ static const unsigned int sdc2_data_pins
MSM_MUX_##f6, \
MSM_MUX_##f7 \
}, \
.ctl_reg = 0x1000 + 0x10 * id, \
.io_reg = 0x1004 + 0x10 * id, \
.intr_cfg_reg = 0x1008 + 0x10 * id, \
---
-1.7.10.4
-
3 files changed, 575 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-apq8064.c
-diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
-index 06cee01..91993a6 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -222,6 +222,14 @@ config PINCTRL_MSM
config PINCTRL_MSM8X74
tristate "Qualcomm 8x74 pin controller driver"
depends on GPIOLIB && OF
-diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
-index 4b83588..9e1fb67 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-imx23.o
+@@ -38,6 +38,7 @@ obj-$(CONFIG_PINCTRL_IMX23) += pinctrl-i
obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
-diff --git a/drivers/pinctrl/pinctrl-apq8064.c b/drivers/pinctrl/pinctrl-apq8064.c
-new file mode 100644
-index 0000000..7c2a8ba
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-apq8064.c
@@ -0,0 +1,566 @@
+MODULE_DESCRIPTION("Qualcomm APQ8064 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, apq8064_pinctrl_of_match);
---
-1.7.10.4
-
drivers/pinctrl/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
-index 91993a6..d34639d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -232,7 +232,7 @@ config PINCTRL_APQ8064
select PINCTRL_MSM
help
This is the pinctrl, pinmux, pinconf and gpiolib driver for the
---
-1.7.10.4
-
3 files changed, 662 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-ipq8064.c
-diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
-index d34639d..232e6bc 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -230,6 +230,14 @@ config PINCTRL_APQ8064
config PINCTRL_MSM8X74
tristate "Qualcomm 8x74 pin controller driver"
depends on GPIOLIB && OF && (ARCH_QCOM || COMPILE_TEST)
-diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
-index 9e1fb67..6b8474a 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
-@@ -39,6 +39,7 @@ obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-imx25.o
+@@ -39,6 +39,7 @@ obj-$(CONFIG_PINCTRL_IMX25) += pinctrl-i
obj-$(CONFIG_PINCTRL_IMX28) += pinctrl-imx28.o
obj-$(CONFIG_PINCTRL_MSM) += pinctrl-msm.o
obj-$(CONFIG_PINCTRL_APQ8064) += pinctrl-apq8064.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
obj-$(CONFIG_PINCTRL_NOMADIK) += pinctrl-nomadik.o
obj-$(CONFIG_PINCTRL_STN8815) += pinctrl-nomadik-stn8815.o
-diff --git a/drivers/pinctrl/pinctrl-ipq8064.c b/drivers/pinctrl/pinctrl-ipq8064.c
-new file mode 100644
-index 0000000..1700b49
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-ipq8064.c
@@ -0,0 +1,653 @@
+MODULE_DESCRIPTION("Qualcomm IPQ8064 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, ipq8064_pinctrl_of_match);
---
-1.7.10.4
-
1 file changed, 95 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
-diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
-new file mode 100644
-index 0000000..e0d35a4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
@@ -0,0 +1,95 @@
+ };
+ };
+ };
---
-1.7.10.4
-
arch/arm/mach-qcom/Kconfig | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
-index a028be2..6440c11 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -5,6 +5,7 @@ config ARCH_QCOM
select QCOM_SCM if SMP
help
Support for Qualcomm's devicetree based systems.
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-ipq8064.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/pinctrl/pinctrl-ipq8064.c b/drivers/pinctrl/pinctrl-ipq8064.c
-index 1700b49..54aba9f 100644
--- a/drivers/pinctrl/pinctrl-ipq8064.c
+++ b/drivers/pinctrl/pinctrl-ipq8064.c
@@ -20,7 +20,7 @@
PINCTRL_PIN(1, "GPIO_1"),
PINCTRL_PIN(2, "GPIO_2"),
PINCTRL_PIN(3, "GPIO_3"),
---
-1.7.10.4
-
1 file changed, 41 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
-diff --git a/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
-new file mode 100644
-index 0000000..d75a9d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_bam_dma.txt
@@ -0,0 +1,41 @@
+ dmas = <&uart-bam 0>, <&uart-bam 1>;
+ dma-names = "rx", "tx";
+ };
---
-1.7.10.4
-
3 files changed, 1122 insertions(+)
create mode 100644 drivers/dma/qcom_bam_dma.c
-diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
-index 605b016..f87cef9 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -401,4 +401,13 @@ config DMATEST
+ provides DMA capabilities for a variety of on-chip devices.
+
endif
-diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
-index a029d0f4..5150c82 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -44,3 +44,5 @@ obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
+obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
+obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
-diff --git a/drivers/dma/qcom_bam_dma.c b/drivers/dma/qcom_bam_dma.c
-new file mode 100644
-index 0000000..82c9231
--- /dev/null
+++ b/drivers/dma/qcom_bam_dma.c
@@ -0,0 +1,1111 @@
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM BAM DMA engine driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
1 file changed, 55 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-msm.txt
-diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
-new file mode 100644
-index 0000000..81b33b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -0,0 +1,55 @@
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
+ clock-names = "core", "iface";
+ };
---
-1.7.10.4
-
3 files changed, 222 insertions(+)
create mode 100644 drivers/mmc/host/sdhci-msm.c
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index 1384f67..c0ea72a 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -334,6 +334,19 @@ config MMC_ATMELMCI
config MMC_MSM
tristate "Qualcomm SDCC Controller Support"
depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 3483b6b..bbc8445 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
+@@ -65,6 +65,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhc
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
-diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
-new file mode 100644
-index 0000000..3b0606f
--- /dev/null
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -0,0 +1,208 @@
+
+MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
drivers/mmc/host/sdhci-msm.c | 420 +++++++++++++++++++++++++++++++++++++++++-
1 file changed, 415 insertions(+), 5 deletions(-)
-diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
-index 3b0606f..acb0e9e 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -18,6 +18,8 @@
static const struct of_device_id sdhci_msm_dt_match[] = {
{ .compatible = "qcom,sdhci-msm-v4" },
{},
---
-1.7.10.4
-
include/linux/of_fdt.h | 4 ++
2 files changed, 135 insertions(+)
-diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
-index 758b4f8..819e112 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -15,6 +15,7 @@
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/slab.h>
-@@ -440,6 +441,118 @@ struct boot_param_header *initial_boot_params;
+@@ -440,6 +441,118 @@ struct boot_param_header *initial_boot_p
#ifdef CONFIG_OF_EARLY_FLATTREE
/**
* of_scan_flat_dt - scan flattened tree blob and call callback on each.
* @it: callback function
* @data: context data pointer
-@@ -856,6 +969,16 @@ void __init __weak early_init_dt_add_memory_arch(u64 base, u64 size)
+@@ -859,6 +972,16 @@ void __init __weak early_init_dt_add_mem
memblock_add(base, size);
}
/*
* called from unflatten_device_tree() to bootstrap devicetree itself
* Architectures can override this definition if memblock isn't used
-@@ -864,6 +987,14 @@ void * __init __weak early_init_dt_alloc_memory_arch(u64 size, u64 align)
+@@ -867,6 +990,14 @@ void * __init __weak early_init_dt_alloc
{
return __va(memblock_alloc(size, align));
}
#endif
bool __init early_init_dt_scan(void *params)
-diff --git a/include/linux/of_fdt.h b/include/linux/of_fdt.h
-index 2b77058..ddd7219 100644
--- a/include/linux/of_fdt.h
+++ b/include/linux/of_fdt.h
-@@ -98,7 +98,10 @@ extern int early_init_dt_scan_chosen(unsigned long node, const char *uname,
+@@ -98,7 +98,10 @@ extern int early_init_dt_scan_chosen(uns
int depth, void *data);
extern int early_init_dt_scan_memory(unsigned long node, const char *uname,
int depth, void *data);
extern void * early_init_dt_alloc_memory_arch(u64 size, u64 align);
extern u64 dt_mem_next_cell(int s, __be32 **cellp);
-@@ -118,6 +121,7 @@ extern void unflatten_and_copy_device_tree(void);
+@@ -118,6 +121,7 @@ extern void unflatten_and_copy_device_tr
extern void early_init_devtree(void *);
extern void early_get_first_memblock_info(void *, phys_addr_t *);
#else /* CONFIG_OF_FLATTREE */
static inline const char *of_flat_dt_get_machine_name(void) { return NULL; }
static inline void unflatten_device_tree(void) {}
static inline void unflatten_and_copy_device_tree(void) {}
---
-1.7.10.4
-
create mode 100644 drivers/of/of_reserved_mem.c
create mode 100644 include/linux/of_reserved_mem.h
-diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig
-index c6973f1..30a7d87 100644
--- a/drivers/of/Kconfig
+++ b/drivers/of/Kconfig
@@ -75,4 +75,10 @@ config OF_MTD
+ Helpers to allow for reservation of memory regions
+
endmenu # OF
-diff --git a/drivers/of/Makefile b/drivers/of/Makefile
-index efd0510..ed9660a 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -9,3 +9,4 @@ obj-$(CONFIG_OF_MDIO) += of_mdio.o
obj-$(CONFIG_OF_PCI_IRQ) += of_pci_irq.o
obj-$(CONFIG_OF_MTD) += of_mtd.o
+obj-$(CONFIG_OF_RESERVED_MEM) += of_reserved_mem.o
-diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
-index 819e112..510c0d8 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -15,6 +15,7 @@
#include <linux/sizes.h>
#include <linux/string.h>
#include <linux/errno.h>
-@@ -450,7 +451,7 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
+@@ -450,7 +451,7 @@ static int __init __reserved_mem_reserve
phys_addr_t base, size;
unsigned long len;
__be32 *prop;
prop = of_get_flat_dt_prop(node, "reg", &len);
if (!prop)
-@@ -477,6 +478,10 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
+@@ -477,6 +478,10 @@ static int __init __reserved_mem_reserve
uname, &base, (unsigned long)size / SZ_1M);
len -= t_len;
}
return 0;
}
-@@ -512,6 +517,7 @@ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname,
+@@ -512,6 +517,7 @@ static int __init __fdt_scan_reserved_me
{
static int found;
const char *status;
if (!found && depth == 1 && strcmp(uname, "reserved-memory") == 0) {
if (__reserved_mem_check_root(node) != 0) {
-@@ -534,7 +540,9 @@ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname,
+@@ -534,7 +540,9 @@ static int __init __fdt_scan_reserved_me
if (status && strcmp(status, "okay") != 0 && strcmp(status, "ok") != 0)
return 0;
/* scan next node */
return 0;
-@@ -550,6 +558,7 @@ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname,
+@@ -550,6 +558,7 @@ static int __init __fdt_scan_reserved_me
void __init early_init_fdt_scan_reserved_mem(void)
{
of_scan_flat_dt(__fdt_scan_reserved_mem, NULL);
}
/**
-diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
-new file mode 100644
-index 0000000..69b8117
--- /dev/null
+++ b/drivers/of/of_reserved_mem.c
@@ -0,0 +1,188 @@
+ &rmem->base, &rmem->size);
+ }
+}
-diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
-new file mode 100644
-index 0000000..89226ed
--- /dev/null
+++ b/include/linux/of_reserved_mem.h
@@ -0,0 +1,21 @@
+#endif
+
+#endif /* __OF_RESERVED_MEM_H */
---
-1.7.10.4
-
include/linux/of_reserved_mem.h | 32 ++++++++++++++++++++++++++++++++
3 files changed, 72 insertions(+)
-diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
-index 69b8117..daaaf93 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
-@@ -170,6 +170,33 @@ static int __init __reserved_mem_alloc_size(unsigned long node,
+@@ -170,6 +170,33 @@ static int __init __reserved_mem_alloc_s
return 0;
}
+ __reserved_mem_init_node(rmem);
}
}
-diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
-index bd02ca7..146e4ff 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
-@@ -167,6 +167,16 @@
+@@ -177,6 +177,16 @@
#define CLK_OF_TABLES()
#endif
#ifdef CONFIG_SMP
#define CPU_METHOD_OF_TABLES() . = ALIGN(8); \
VMLINUX_SYMBOL(__cpu_method_of_table_begin) = .; \
-@@ -499,6 +509,7 @@
+@@ -510,6 +520,7 @@
TRACE_SYSCALLS() \
MEM_DISCARD(init.rodata) \
CLK_OF_TABLES() \
CLKSRC_OF_TABLES() \
CPU_METHOD_OF_TABLES() \
KERNEL_DTB() \
-diff --git a/include/linux/of_reserved_mem.h b/include/linux/of_reserved_mem.h
-index 89226ed..9b1fbb7 100644
--- a/include/linux/of_reserved_mem.h
+++ b/include/linux/of_reserved_mem.h
@@ -1,21 +1,53 @@
#endif
#endif /* __OF_RESERVED_MEM_H */
---
-1.7.10.4
-
arch/arm/mm/init.c | 2 ++
2 files changed, 3 insertions(+)
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index d02ce70..4332e8d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -1922,6 +1922,7 @@ config USE_OF
+@@ -1923,6 +1923,7 @@ config USE_OF
select IRQ_DOMAIN
select OF
select OF_EARLY_FLATTREE
help
Include support for flattened device tree machine descriptions.
-diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
-index 804d615..2a77ba8 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
-@@ -323,6 +323,8 @@ void __init arm_memblock_init(struct meminfo *mi,
+@@ -323,6 +323,8 @@ void __init arm_memblock_init(struct mem
if (mdesc->reserve)
mdesc->reserve();
/*
* reserve memory for DMA contigouos allocations,
* must come from DMA area inside low memory
---
-1.7.10.4
-
1 file changed, 133 insertions(+)
create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-diff --git a/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
-new file mode 100644
-index 0000000..3da0ebd
--- /dev/null
+++ b/Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
@@ -0,0 +1,133 @@
+ /* ... */
+ };
+};
---
-1.7.10.4
-
drivers/of/fdt.c | 3 +++
1 file changed, 3 insertions(+)
-diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
-index 510c0d8..501bc83 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
-@@ -557,6 +557,9 @@ static int __init __fdt_scan_reserved_mem(unsigned long node, const char *uname,
+@@ -557,6 +557,9 @@ static int __init __fdt_scan_reserved_me
*/
void __init early_init_fdt_scan_reserved_mem(void)
{
of_scan_flat_dt(__fdt_scan_reserved_mem, NULL);
fdt_init_reserved_mem();
}
---
-1.7.10.4
-
create mode 100644 include/dt-bindings/spmi/spmi.h
create mode 100644 include/linux/spmi.h
-diff --git a/drivers/Kconfig b/drivers/Kconfig
-index b3138fb..e0a4ae6 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig"
source "drivers/hsi/Kconfig"
source "drivers/pps/Kconfig"
-diff --git a/drivers/Makefile b/drivers/Makefile
-index 8e3b8b0..3d6de8b 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_ATA) += ata/
obj-y += hsi/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
-diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
-new file mode 100644
-index 0000000..1dbfee0
--- /dev/null
+++ b/drivers/spmi/Kconfig
@@ -0,0 +1,9 @@
+ SPMI (System Power Management Interface) is a two-wire
+ serial interface between baseband and application processors
+ and Power Management Integrated Circuits (PMIC).
-diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
-new file mode 100644
-index 0000000..1de1acd
--- /dev/null
+++ b/drivers/spmi/Makefile
@@ -0,0 +1,4 @@
+# Makefile for kernel SPMI framework.
+#
+obj-$(CONFIG_SPMI) += spmi.o
-diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
-new file mode 100644
-index 0000000..6122c8f
--- /dev/null
+++ b/drivers/spmi/spmi.c
@@ -0,0 +1,609 @@
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SPMI module");
+MODULE_ALIAS("platform:spmi");
-diff --git a/include/dt-bindings/spmi/spmi.h b/include/dt-bindings/spmi/spmi.h
-new file mode 100644
-index 0000000..d11e1e5
--- /dev/null
+++ b/include/dt-bindings/spmi/spmi.h
@@ -0,0 +1,18 @@
+#define SPMI_GSID 1
+
+#endif
-diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
-index 45e9214..677e474 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -432,6 +432,14 @@ struct spi_device_id {
/* dmi */
enum dmi_field {
DMI_NONE,
-diff --git a/include/linux/spmi.h b/include/linux/spmi.h
-new file mode 100644
-index 0000000..91f5eab
--- /dev/null
+++ b/include/linux/spmi.h
@@ -0,0 +1,191 @@
+int spmi_command_shutdown(struct spmi_device *sdev);
+
+#endif
---
-1.7.10.4
-
3 files changed, 424 insertions(+)
create mode 100644 drivers/spmi/spmi-pmic-arb.c
-diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
-index 1dbfee0..80b7901 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -7,3 +7,20 @@ menuconfig SPMI
+ other devices that have the SPMI interface.
+
+endif
-diff --git a/drivers/spmi/Makefile b/drivers/spmi/Makefile
-index 1de1acd..fc75104 100644
--- a/drivers/spmi/Makefile
+++ b/drivers/spmi/Makefile
@@ -2,3 +2,5 @@
obj-$(CONFIG_SPMI) += spmi.o
+
+obj-$(CONFIG_SPMI_MSM_PMIC_ARB) += spmi-pmic-arb.o
-diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
-new file mode 100644
-index 0000000..2dd27e8
--- /dev/null
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -0,0 +1,405 @@
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:spmi_pmic_arb");
---
-1.7.10.4
-
drivers/spmi/spmi-pmic-arb.c | 377 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 376 insertions(+), 2 deletions(-)
-diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
-index 80b7901..075bd79 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -13,6 +13,7 @@ if SPMI
depends on ARCH_MSM || COMPILE_TEST
default ARCH_MSM
help
-diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
-index 2dd27e8..246e03a 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -13,6 +13,9 @@
};
static inline u32 pmic_arb_base_read(struct spmi_pmic_arb_dev *dev, u32 offset)
-@@ -306,12 +325,316 @@ static int pmic_arb_write_cmd(struct spmi_controller *ctrl, u8 opc, u8 sid,
+@@ -306,12 +325,316 @@ static int pmic_arb_write_cmd(struct spm
return rc;
}
int err, i;
ctrl = spmi_controller_alloc(&pdev->dev, sizeof(*pa));
-@@ -319,6 +642,7 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
+@@ -319,6 +642,7 @@ static int spmi_pmic_arb_probe(struct pl
return -ENOMEM;
pa = spmi_controller_get_drvdata(ctrl);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "core");
pa->base = devm_ioremap_resource(&ctrl->dev, res);
-@@ -341,6 +665,12 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
+@@ -341,6 +665,12 @@ static int spmi_pmic_arb_probe(struct pl
goto err_put_ctrl;
}
err = of_property_read_u32(pdev->dev.of_node, "qcom,channel", &channel);
if (err) {
dev_err(&pdev->dev, "channel unspecified.\n");
-@@ -355,6 +685,29 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
+@@ -355,6 +685,29 @@ static int spmi_pmic_arb_probe(struct pl
pa->channel = channel;
platform_set_drvdata(pdev, ctrl);
raw_spin_lock_init(&pa->lock);
-@@ -362,15 +715,31 @@ static int spmi_pmic_arb_probe(struct platform_device *pdev)
+@@ -362,15 +715,31 @@ static int spmi_pmic_arb_probe(struct pl
ctrl->read_cmd = pmic_arb_read_cmd;
ctrl->write_cmd = pmic_arb_write_cmd;
spmi_controller_put(ctrl);
return 0;
}
---
-1.7.10.4
-
drivers/spmi/Kconfig | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/drivers/spmi/Kconfig b/drivers/spmi/Kconfig
-index 075bd79..bf1295e 100644
--- a/drivers/spmi/Kconfig
+++ b/drivers/spmi/Kconfig
@@ -14,8 +14,8 @@ config SPMI_MSM_PMIC_ARB
help
If you say yes to this option, support will be included for the
built-in SPMI PMIC Arbiter interface on Qualcomm MSM family
---
-1.7.10.4
-
drivers/spmi/spmi.c | 35 -----------------------------------
1 file changed, 35 deletions(-)
-diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
-index 6122c8f..3b57807 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
-@@ -46,40 +46,6 @@ static const struct device_type spmi_ctrl_type = {
+@@ -46,40 +46,6 @@ static const struct device_type spmi_ctr
.release = spmi_ctrl_release,
};
static int spmi_device_match(struct device *dev, struct device_driver *drv)
{
if (of_driver_match_device(dev, drv))
-@@ -391,7 +357,6 @@ static int spmi_drv_remove(struct device *dev)
+@@ -391,7 +357,6 @@ static int spmi_drv_remove(struct device
static struct bus_type spmi_bus_type = {
.name = "spmi",
.match = spmi_device_match,
.probe = spmi_drv_probe,
.remove = spmi_drv_remove,
};
---
-1.7.10.4
-
3 files changed, 779 insertions(+)
create mode 100644 drivers/i2c/busses/i2c-qup.c
-diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
-index de17c55..1886315 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
-@@ -648,6 +648,16 @@ config I2C_PXA_SLAVE
+@@ -649,6 +649,16 @@ config I2C_PXA_SLAVE
is necessary for systems where the PXA may be a target on the
I2C bus.
config I2C_RIIC
tristate "Renesas RIIC adapter"
depends on ARCH_SHMOBILE || COMPILE_TEST
-diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
-index a08931f..bf2257b 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
-diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
-new file mode 100644
-index 0000000..c9d5f78
--- /dev/null
+++ b/drivers/i2c/busses/i2c-qup.c
@@ -0,0 +1,768 @@
+
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c_qup");
---
-1.7.10.4
-
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
-new file mode 100644
-index 0000000..dc71754
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,40 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
---
-1.7.10.4
-
drivers/i2c/busses/i2c-qup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
-index c9d5f78..ee40980 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
-@@ -633,12 +633,12 @@ static int qup_i2c_probe(struct platform_device *pdev)
+@@ -633,12 +633,12 @@ static int qup_i2c_probe(struct platform
* associated with each byte written/received
*/
size = QUP_OUTPUT_BLOCK_SIZE(io_mode);
return -EIO;
qup->in_blk_sz = blk_sizes[size] / 2;
---
-1.7.10.4
-
drivers/i2c/busses/i2c-qup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
-index ee40980..1b4cf14 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
-@@ -562,7 +562,7 @@ static int qup_i2c_probe(struct platform_device *pdev)
+@@ -562,7 +562,7 @@ static int qup_i2c_probe(struct platform
u32 io_mode, hw_ver, size;
int ret, fs_div, hs_div;
int src_clk_freq;
qup = devm_kzalloc(&pdev->dev, sizeof(*qup), GFP_KERNEL);
if (!qup)
---
-1.7.10.4
-
drivers/i2c/busses/i2c-qup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
-index 1b4cf14..2a5efb5 100644
--- a/drivers/i2c/busses/i2c-qup.c
+++ b/drivers/i2c/busses/i2c-qup.c
-@@ -479,7 +479,7 @@ static int qup_i2c_xfer(struct i2c_adapter *adap,
+@@ -479,7 +479,7 @@ static int qup_i2c_xfer(struct i2c_adapt
int ret, idx;
ret = pm_runtime_get_sync(qup->dev);
goto out;
writel(1, qup->base + QUP_SW_RESET);
---
-1.7.10.4
-
3 files changed, 851 insertions(+)
create mode 100644 drivers/spi/spi-qup.c
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 581ee2a..9e9e3ed 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -381,6 +381,19 @@ config SPI_RSPI
+@@ -390,6 +390,19 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI and QSPI blocks.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 95af48d..e598147 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -59,6 +59,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_PXADMA) += spi-pxa2xx-pxadma.o
+@@ -60,6 +60,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-new file mode 100644
-index 0000000..b0bcc09
--- /dev/null
+++ b/drivers/spi/spi-qup.c
@@ -0,0 +1,837 @@
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION("0.4");
+MODULE_ALIAS("platform:spi_qup");
---
-1.7.10.4
-
1 file changed, 85 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-new file mode 100644
-index 0000000..b82a268
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -0,0 +1,85 @@
+ spi-cs-high;
+ };
+ };
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 1 -
1 file changed, 1 deletion(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index b0bcc09..5edc56f 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
-@@ -802,7 +802,6 @@ static int spi_qup_remove(struct platform_device *pdev)
+@@ -802,7 +802,6 @@ static int spi_qup_remove(struct platfor
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 15 +--------------
1 file changed, 1 insertion(+), 14 deletions(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index 5edc56f..dec339d 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -134,7 +134,6 @@ struct spi_qup {
spinlock_t lock;
int in_fifo_sz;
-@@ -517,18 +516,6 @@ static int spi_qup_setup(struct spi_device *spi)
+@@ -517,18 +516,6 @@ static int spi_qup_setup(struct spi_devi
struct spi_qup *controller = spi_master_get_devdata(spi->master);
struct spi_qup_device *chip = spi_get_ctldata(spi);
if (!chip) {
/* First setup */
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
-@@ -629,6 +616,7 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -629,6 +616,7 @@ static int spi_qup_probe(struct platform
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP;
master->num_chipselect = SPI_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->setup = spi_qup_setup;
master->cleanup = spi_qup_cleanup;
master->set_cs = spi_qup_set_cs;
-@@ -645,7 +633,6 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -645,7 +633,6 @@ static int spi_qup_probe(struct platform
controller->iclk = iclk;
controller->cclk = cclk;
controller->irq = irq;
spin_lock_init(&controller->lock);
init_completion(&controller->done);
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index dec339d..886edb4 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
-@@ -709,7 +709,7 @@ static int spi_qup_pm_suspend_runtime(struct device *device)
+@@ -709,7 +709,7 @@ static int spi_qup_pm_suspend_runtime(st
/* Enable clocks auto gaiting */
config = readl(controller->base + QUP_CONFIG);
writel_relaxed(config, controller->base + QUP_CONFIG);
return 0;
}
-@@ -722,7 +722,7 @@ static int spi_qup_pm_resume_runtime(struct device *device)
+@@ -722,7 +722,7 @@ static int spi_qup_pm_resume_runtime(str
/* Disable clocks auto gaiting */
config = readl_relaxed(controller->base + QUP_CONFIG);
writel_relaxed(config, controller->base + QUP_CONFIG);
return 0;
}
---
-1.7.10.4
-
drivers/spi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 9e9e3ed..e6a04f8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -383,7 +383,7 @@ config SPI_RSPI
+@@ -392,7 +392,7 @@ config SPI_RSPI
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
help
Qualcomm Universal Peripheral (QUP) core is an AHB slave that
provides a common data path (an output FIFO and an input FIFO)
---
-1.7.10.4
-
drivers/spi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index e6a04f8..2d9111c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -383,7 +383,7 @@ config SPI_RSPI
+@@ -392,7 +392,7 @@ config SPI_RSPI
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
help
Qualcomm Universal Peripheral (QUP) core is an AHB slave that
provides a common data path (an output FIFO and an input FIFO)
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 1 -
1 file changed, 1 deletion(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index 886edb4..203f0d4 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
-@@ -819,5 +819,4 @@ static struct platform_driver spi_qup_driver = {
+@@ -819,5 +819,4 @@ static struct platform_driver spi_qup_dr
module_platform_driver(spi_qup_driver);
MODULE_LICENSE("GPL v2");
-MODULE_VERSION("0.4");
MODULE_ALIAS("platform:spi_qup");
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 61 ++++++++-----------------------------------------
1 file changed, 9 insertions(+), 52 deletions(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index 203f0d4..b032e88 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -123,11 +123,6 @@
struct spi_qup {
void __iomem *base;
struct device *dev;
-@@ -338,14 +333,13 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
+@@ -338,14 +333,13 @@ static irqreturn_t spi_qup_qup_irq(int i
/* set clock freq ... bits per word */
dev_err(controller->dev, "too big size for loopback %d > %d\n",
xfer->len, controller->in_fifo_sz);
return -EIO;
-@@ -399,12 +393,12 @@ static int spi_qup_io_config(struct spi_qup *controller,
+@@ -399,12 +393,12 @@ static int spi_qup_io_config(struct spi_
config = readl_relaxed(controller->base + SPI_CONFIG);
config &= ~SPI_CONFIG_INPUT_FIRST;
else
config |= SPI_CONFIG_INPUT_FIRST;
-@@ -413,7 +407,7 @@ static int spi_qup_io_config(struct spi_qup *controller,
+@@ -413,7 +407,7 @@ static int spi_qup_io_config(struct spi_
* HS_MODE improves signal stability for spi-clk high rates,
* but is invalid in loop back mode.
*/
config |= SPI_CONFIG_HS_MODE;
else
config &= ~SPI_CONFIG_HS_MODE;
-@@ -433,7 +427,6 @@ static int spi_qup_io_config(struct spi_qup *controller,
+@@ -433,7 +427,6 @@ static int spi_qup_io_config(struct spi_
static void spi_qup_set_cs(struct spi_device *spi, bool enable)
{
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 iocontol, mask;
-@@ -444,9 +437,9 @@ static void spi_qup_set_cs(struct spi_device *spi, bool enable)
+@@ -444,9 +437,9 @@ static void spi_qup_set_cs(struct spi_de
iocontol |= SPI_IO_C_FORCE_CS;
iocontol &= ~SPI_IO_C_CS_SELECT_MASK;
if (enable)
iocontol |= mask;
-@@ -461,11 +454,10 @@ static int spi_qup_transfer_one(struct spi_master *master,
+@@ -461,11 +454,10 @@ static int spi_qup_transfer_one(struct s
struct spi_transfer *xfer)
{
struct spi_qup *controller = spi_master_get_devdata(master);
static int spi_qup_probe(struct platform_device *pdev)
{
struct spi_master *master;
-@@ -561,7 +521,6 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -561,7 +521,6 @@ static int spi_qup_probe(struct platform
return PTR_ERR(base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
-@@ -617,8 +576,6 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -617,8 +576,6 @@ static int spi_qup_probe(struct platform
master->num_chipselect = SPI_NUM_CHIPSELECTS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->max_speed_hz = max_freq;
master->set_cs = spi_qup_set_cs;
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
---
-1.7.10.4
-
drivers/spi/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 2d9111c..a2d3570 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -383,7 +383,7 @@ config SPI_RSPI
+@@ -392,7 +392,7 @@ config SPI_RSPI
config SPI_QUP
tristate "Qualcomm SPI controller with QUP interface"
help
Qualcomm Universal Peripheral (QUP) core is an AHB slave that
provides a common data path (an output FIFO and an input FIFO)
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index b032e88..65bf18e 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
-@@ -287,7 +287,7 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
+@@ -287,7 +287,7 @@ static irqreturn_t spi_qup_qup_irq(int i
writel_relaxed(opflags, controller->base + QUP_OPERATIONAL);
if (!xfer) {
qup_err, spi_err, opflags);
return IRQ_HANDLED;
}
-@@ -366,7 +366,7 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -366,7 +366,7 @@ static int spi_qup_io_config(struct spi_
n_words = xfer->len / w_size;
controller->w_size = w_size;
mode = QUP_IO_M_MODE_FIFO;
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
writel_relaxed(n_words, controller->base + QUP_MX_WRITE_CNT);
---
-1.7.10.4
-
create mode 100644 drivers/clk/qcom/common.c
create mode 100644 drivers/clk/qcom/common.h
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index f60db2e..689e05b 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -1,5 +1,6 @@
clk-qcom-y += clk-regmap.o
clk-qcom-y += clk-pll.o
clk-qcom-y += clk-rcg.o
-diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
-new file mode 100644
-index 0000000..86b45fb
--- /dev/null
+++ b/drivers/clk/qcom/common.c
@@ -0,0 +1,99 @@
+ reset_controller_unregister(platform_get_drvdata(pdev));
+}
+EXPORT_SYMBOL_GPL(qcom_cc_remove);
-diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
-new file mode 100644
-index 0000000..2c3cfc8
--- /dev/null
+++ b/drivers/clk/qcom/common.h
@@ -0,0 +1,34 @@
+extern void qcom_cc_remove(struct platform_device *pdev);
+
+#endif
-diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
-index bc0b7f1..44bc6fa 100644
--- a/drivers/clk/qcom/gcc-msm8660.c
+++ b/drivers/clk/qcom/gcc-msm8660.c
@@ -25,6 +25,7 @@
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
-@@ -2701,94 +2702,28 @@ static const struct regmap_config gcc_msm8660_regmap_config = {
+@@ -2701,94 +2702,28 @@ static const struct regmap_config gcc_ms
.fast_io = true,
};
return 0;
}
-diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
-index fd446ab..633b019 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -25,6 +25,7 @@
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
-@@ -2875,51 +2876,24 @@ static const struct regmap_config gcc_msm8960_regmap_config = {
+@@ -2875,51 +2876,24 @@ static const struct regmap_config gcc_ms
.fast_io = true,
};
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-@@ -2930,39 +2904,12 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
+@@ -2930,39 +2904,12 @@ static int gcc_msm8960_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
return 0;
}
-diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
-index 51d457e..0d1edc1 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -25,6 +25,7 @@
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
-@@ -2574,51 +2575,24 @@ static const struct regmap_config gcc_msm8974_regmap_config = {
+@@ -2574,51 +2575,24 @@ static const struct regmap_config gcc_ms
.fast_io = true,
};
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-@@ -2631,39 +2605,12 @@ static int gcc_msm8974_probe(struct platform_device *pdev)
+@@ -2631,39 +2605,12 @@ static int gcc_msm8974_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
return 0;
}
-diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c
-index f9b59c7..12f3c0b 100644
--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
@@ -26,6 +26,7 @@
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
-@@ -2222,85 +2223,28 @@ static const struct regmap_config mmcc_msm8960_regmap_config = {
+@@ -2222,85 +2223,28 @@ static const struct regmap_config mmcc_m
.fast_io = true,
};
return 0;
}
-diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
-index c957745..60b7c24 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -25,6 +25,7 @@
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-rcg.h"
-@@ -2524,88 +2525,39 @@ static const struct regmap_config mmcc_msm8974_regmap_config = {
+@@ -2527,88 +2528,39 @@ static const struct regmap_config mmcc_m
.fast_io = true,
};
return 0;
}
---
-1.7.10.4
-
drivers/clk/qcom/gcc-msm8960.c | 30 ++++++++++++++++++--
3 files changed, 30 insertions(+), 5 deletions(-)
-diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
-index 767401f..7b7104e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
-@@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller Binding
+@@ -4,6 +4,7 @@ Qualcomm Global Clock & Reset Controller
Required properties :
- compatible : shall contain only one of the following:
"qcom,gcc-msm8660"
"qcom,gcc-msm8960"
"qcom,gcc-msm8974"
-diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
-index 995bcfa..7f696b7 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -13,10 +13,10 @@ config MSM_GCC_8660
Say Y if you want to use peripheral devices such as UART, SPI,
i2c, USB, SD/eMMC, SATA, PCIe, etc.
-diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
-index 633b019..8e2b6dd 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -1,5 +1,5 @@
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
-@@ -2868,6 +2868,16 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
+@@ -2868,6 +2868,16 @@ static const struct qcom_reset_map gcc_m
[RIVA_RESET] = { 0x35e0 },
};
static const struct regmap_config gcc_msm8960_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
-@@ -2884,8 +2894,17 @@ static const struct qcom_cc_desc gcc_msm8960_desc = {
+@@ -2884,8 +2894,17 @@ static const struct qcom_cc_desc gcc_msm
.num_resets = ARRAY_SIZE(gcc_msm8960_resets),
};
{ }
};
MODULE_DEVICE_TABLE(of, gcc_msm8960_match_table);
-@@ -2894,6 +2913,11 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
+@@ -2894,6 +2913,11 @@ static int gcc_msm8960_probe(struct plat
{
struct clk *clk;
struct device *dev = &pdev->dev;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 19200000);
-@@ -2904,7 +2928,7 @@ static int gcc_msm8960_probe(struct platform_device *pdev)
+@@ -2904,7 +2928,7 @@ static int gcc_msm8960_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
}
static int gcc_msm8960_remove(struct platform_device *pdev)
---
-1.7.10.4
-
include/dt-bindings/reset/qcom,gcc-msm8960.h | 2 +-
3 files changed, 6 insertions(+), 7 deletions(-)
-diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
-index 8e2b6dd..f4ffd91 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
-@@ -2810,7 +2810,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
+@@ -2810,7 +2810,7 @@ static const struct qcom_reset_map gcc_m
[PPSS_PROC_RESET] = { 0x2594, 1 },
[PPSS_RESET] = { 0x2594},
[DMA_BAM_RESET] = { 0x25c0, 7 },
[SLIMBUS_H_RESET] = { 0x2620, 7 },
[SFAB_CFPB_M_RESET] = { 0x2680, 7 },
[SFAB_CFPB_S_RESET] = { 0x26c0, 7 },
-@@ -2823,7 +2823,7 @@ static const struct qcom_reset_map gcc_msm8960_resets[] = {
+@@ -2823,7 +2823,7 @@ static const struct qcom_reset_map gcc_m
[SFAB_SFPB_M_RESET] = { 0x2780, 7 },
[SFAB_SFPB_S_RESET] = { 0x27a0, 7 },
[RPM_PROC_RESET] = { 0x27c0, 7 },
[SDC1_RESET] = { 0x2830 },
[SDC2_RESET] = { 0x2850 },
[SDC3_RESET] = { 0x2870 },
-diff --git a/include/dt-bindings/clock/qcom,gcc-msm8960.h b/include/dt-bindings/clock/qcom,gcc-msm8960.h
-index 03bbf49..f9f5471 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8960.h
@@ -51,7 +51,7 @@
#define SATA_RXOOB_CLK 239
#define SATA_PMALIVE_CLK 240
#define SATA_PHY_REF_CLK 241
-diff --git a/include/dt-bindings/reset/qcom,gcc-msm8960.h b/include/dt-bindings/reset/qcom,gcc-msm8960.h
-index a840e68..07edd0e 100644
--- a/include/dt-bindings/reset/qcom,gcc-msm8960.h
+++ b/include/dt-bindings/reset/qcom,gcc-msm8960.h
@@ -58,7 +58,7 @@
#define SLIMBUS_H_RESET 45
#define SFAB_CFPB_M_RESET 46
#define SFAB_CFPB_S_RESET 47
---
-1.7.10.4
-
1 file changed, 164 insertions(+)
create mode 100644 arch/arm/configs/qcom_defconfig
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-new file mode 100644
-index 0000000..bfed753
--- /dev/null
+++ b/arch/arm/configs/qcom_defconfig
@@ -0,0 +1,164 @@
+# CONFIG_DETECT_HUNG_TASK is not set
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_TIMER_STATS=y
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index bfed753..42ebd72 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -131,6 +131,7 @@ CONFIG_RTC_CLASS=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
---
-1.7.10.4
-
3 files changed, 8 insertions(+)
create mode 100644 drivers/soc/Kconfig
-diff --git a/drivers/Kconfig b/drivers/Kconfig
-index e0a4ae6..a299cbd 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -132,6 +132,8 @@ source "drivers/staging/Kconfig"
source "drivers/clk/Kconfig"
source "drivers/hwspinlock/Kconfig"
-diff --git a/drivers/Makefile b/drivers/Makefile
-index 3d6de8b..4c2bdc1 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -33,6 +33,9 @@ obj-y += amba/
obj-$(CONFIG_VIRTIO) += virtio/
obj-$(CONFIG_XEN) += xen/
-diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
-new file mode 100644
-index 0000000..339baa8
--- /dev/null
+++ b/drivers/soc/Kconfig
@@ -0,0 +1,3 @@
+menu "SOC (System On Chip) specific Drivers"
+
+endmenu
---
-1.7.10.4
-
create mode 100644 drivers/soc/qcom/Makefile
create mode 100644 drivers/soc/qcom/qcom_gsbi.c
-diff --git a/drivers/soc/Kconfig b/drivers/soc/Kconfig
-index 339baa8..c854385 100644
--- a/drivers/soc/Kconfig
+++ b/drivers/soc/Kconfig
@@ -1,3 +1,5 @@
+source "drivers/soc/qcom/Kconfig"
+
endmenu
-diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
-new file mode 100644
-index 0000000..0f7c447
--- /dev/null
+++ b/drivers/soc/Makefile
@@ -0,0 +1,5 @@
+#
+
+obj-$(CONFIG_ARCH_QCOM) += qcom/
-diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
-new file mode 100644
-index 0000000..7bd2c94
--- /dev/null
+++ b/drivers/soc/qcom/Kconfig
@@ -0,0 +1,11 @@
+ functions for connecting the underlying serial UART, SPI, and I2C
+ devices to the output pins.
+
-diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
-new file mode 100644
-index 0000000..4389012
--- /dev/null
+++ b/drivers/soc/qcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
-diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
-new file mode 100644
-index 0000000..061dd06
--- /dev/null
+++ b/drivers/soc/qcom/qcom_gsbi.c
@@ -0,0 +1,84 @@
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM GSBI driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
drivers/soc/qcom/qcom_gsbi.c | 1 +
1 file changed, 1 insertion(+)
-diff --git a/drivers/soc/qcom/qcom_gsbi.c b/drivers/soc/qcom/qcom_gsbi.c
-index 061dd06..447458e 100644
--- a/drivers/soc/qcom/qcom_gsbi.c
+++ b/drivers/soc/qcom/qcom_gsbi.c
-@@ -64,6 +64,7 @@ static int gsbi_probe(struct platform_device *pdev)
+@@ -64,6 +64,7 @@ static int gsbi_probe(struct platform_de
static const struct of_device_id gsbi_dt_match[] = {
{ .compatible = "qcom,gsbi-v1.0.0", },
};
MODULE_DEVICE_TABLE(of, gsbi_dt_match);
---
-1.7.10.4
-
drivers/tty/serial/msm_serial.h | 9 +++
2 files changed, 146 insertions(+), 3 deletions(-)
-diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
-index b5d779c..053b98e 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -39,6 +39,13 @@
struct msm_port {
struct uart_port uart;
char name[16];
-@@ -309,6 +316,8 @@ static unsigned int msm_get_mctrl(struct uart_port *port)
+@@ -309,6 +316,8 @@ static unsigned int msm_get_mctrl(struct
static void msm_reset(struct uart_port *port)
{
/* reset everything */
msm_write(port, UART_CR_CMD_RESET_RX, UART_CR);
msm_write(port, UART_CR_CMD_RESET_TX, UART_CR);
-@@ -316,6 +325,10 @@ static void msm_reset(struct uart_port *port)
+@@ -316,6 +325,10 @@ static void msm_reset(struct uart_port *
msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR);
msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR);
msm_write(port, UART_CR_CMD_SET_RFR, UART_CR);
}
static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl)
-@@ -711,6 +724,117 @@ static void msm_power(struct uart_port *port, unsigned int state,
+@@ -711,6 +724,117 @@ static void msm_power(struct uart_port *
}
}
};
static struct msm_port msm_uart_ports[] = {
-@@ -900,7 +1029,10 @@ static struct uart_driver msm_uart_driver = {
+@@ -900,7 +1029,10 @@ static struct uart_driver msm_uart_drive
static atomic_t msm_uart_next_id = ATOMIC_INIT(0);
static const struct of_device_id msm_uartdm_table[] = {
{ }
};
-@@ -909,6 +1041,7 @@ static int __init msm_serial_probe(struct platform_device *pdev)
+@@ -909,6 +1041,7 @@ static int __init msm_serial_probe(struc
struct msm_port *msm_port;
struct resource *resource;
struct uart_port *port;
int irq;
if (pdev->id == -1)
-@@ -923,8 +1056,9 @@ static int __init msm_serial_probe(struct platform_device *pdev)
+@@ -923,8 +1056,9 @@ static int __init msm_serial_probe(struc
port->dev = &pdev->dev;
msm_port = UART_TO_MSM(port);
else
msm_port->is_uartdm = 0;
-diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
-index 469fda5..1e9b68b 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -59,6 +59,7 @@
#define UARTDM_DMRX 0x34
#define UARTDM_NCF_TX 0x40
#define UARTDM_RX_TOTAL_SNAP 0x38
---
-1.7.10.4
-
drivers/tty/serial/msm_serial.h | 5 ----
2 files changed, 2 insertions(+), 51 deletions(-)
-diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
-index 053b98e..778e376 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -52,7 +52,6 @@ struct msm_port {
int is_uartdm;
unsigned int old_snap_state;
};
-@@ -599,9 +598,7 @@ static const char *msm_type(struct uart_port *port)
+@@ -599,9 +598,7 @@ static const char *msm_type(struct uart_
static void msm_release_port(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
resource_size_t size;
uart_resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -612,28 +609,12 @@ static void msm_release_port(struct uart_port *port)
+@@ -612,28 +609,12 @@ static void msm_release_port(struct uart
release_mem_region(port->mapbase, size);
iounmap(port->membase);
port->membase = NULL;
resource_size_t size;
int ret;
-@@ -652,30 +633,8 @@ static int msm_request_port(struct uart_port *port)
+@@ -652,30 +633,8 @@ static int msm_request_port(struct uart_
goto fail_release_port;
}
int ret;
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_MSM;
-@@ -691,9 +649,6 @@ static void msm_config_port(struct uart_port *port, int flags)
+@@ -691,9 +649,6 @@ static void msm_config_port(struct uart_
if (ret)
return;
}
}
static int msm_verify_port(struct uart_port *port, struct serial_struct *ser)
-@@ -1110,6 +1065,7 @@ static struct of_device_id msm_match_table[] = {
+@@ -1110,6 +1065,7 @@ static struct of_device_id msm_match_tab
static struct platform_driver msm_platform_driver = {
.remove = msm_serial_remove,
if (unlikely(ret))
uart_unregister_driver(&msm_uart_driver);
-diff --git a/drivers/tty/serial/msm_serial.h b/drivers/tty/serial/msm_serial.h
-index 1e9b68b..d98d45e 100644
--- a/drivers/tty/serial/msm_serial.h
+++ b/drivers/tty/serial/msm_serial.h
@@ -109,11 +109,6 @@
#define UARTDM_RXFS 0x50
#define UARTDM_RXFS_BUF_SHIFT 0x7
#define UARTDM_RXFS_BUF_MASK 0x7
---
-1.7.10.4
-
create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
create mode 100644 include/dt-bindings/soc/qcom,gsbi.h
-diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
-new file mode 100644
-index 0000000..4ce24d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.txt
@@ -0,0 +1,78 @@
+ };
+ };
+
-diff --git a/include/dt-bindings/soc/qcom,gsbi.h b/include/dt-bindings/soc/qcom,gsbi.h
-new file mode 100644
-index 0000000..7ac4292
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,gsbi.h
@@ -0,0 +1,26 @@
+#define GSBI_CRCI_UART 1
+
+#endif
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8974.dtsi | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
-index f687239..23aa387 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -198,5 +198,34 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8974.dtsi | 22 ++++++++++++++++++++++
2 files changed, 35 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
-index 13ac3e2..92320c4 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -3,4 +3,17 @@
+ };
+ };
};
-diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
-index 23aa387..c530a33 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -192,6 +192,28 @@
rng@f9bff000 {
compatible = "qcom,prng";
reg = <0xf9bff000 0x200>;
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8974.dtsi | 49 +++++++++---------------
2 files changed, 45 insertions(+), 32 deletions(-)
-diff --git a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
-index 92320c4..b4dfb01 100644
--- a/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8074-dragonboard.dts
@@ -4,7 +4,11 @@
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
-index c530a33..69dca2a 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -13,10 +13,10 @@
};
};
};
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8960.dtsi | 176 ++++++++++++++++++--------------
2 files changed, 108 insertions(+), 78 deletions(-)
-diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
-index a58fb88..8f75cc4 100644
--- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
@@ -3,4 +3,14 @@
+ };
+ };
};
-diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi
-index 997b7b9..5303e53 100644
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -3,6 +3,7 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-msm8660.dtsi | 115 ++++++++++++++++++-------------
2 files changed, 78 insertions(+), 47 deletions(-)
-diff --git a/arch/arm/boot/dts/qcom-msm8660-surf.dts b/arch/arm/boot/dts/qcom-msm8660-surf.dts
-index 169bad9..45180ad 100644
--- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
@@ -3,4 +3,14 @@
+ };
+ };
};
-diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
-index c52a9e9..53837aaa2f 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -3,6 +3,7 @@
+ #size-cells = <1>;
+ ranges;
+ compatible = "simple-bus";
++
++ intc: interrupt-controller@2080000 {
++ compatible = "qcom,msm-8660-qgic";
++ interrupt-controller;
++ #interrupt-cells = <3>;
++ reg = < 0x02080000 0x1000 >,
++ < 0x02081000 0x1000 >;
++ };
- timer@2000000 {
- compatible = "qcom,scss-timer", "qcom,msm-timer";
- <32768>;
- cpu-offset = <0x40000>;
- };
-+ intc: interrupt-controller@2080000 {
-+ compatible = "qcom,msm-8660-qgic";
-+ interrupt-controller;
-+ #interrupt-cells = <3>;
-+ reg = < 0x02080000 0x1000 >,
-+ < 0x02081000 0x1000 >;
-+ };
-
-- msmgpio: gpio@800000 {
-- compatible = "qcom,msm-gpio";
-- reg = <0x00800000 0x4000>;
-- gpio-controller;
-- #gpio-cells = <2>;
-- ngpio = <173>;
-- interrupts = <0 16 0x4>;
-- interrupt-controller;
-- #interrupt-cells = <2>;
-- };
+ timer@2000000 {
+ compatible = "qcom,scss-timer", "qcom,msm-timer";
+ interrupts = <1 0 0x301>,
+ cpu-offset = <0x40000>;
+ };
-- gcc: clock-controller@900000 {
-- compatible = "qcom,gcc-msm8660";
-- #clock-cells = <1>;
-- #reset-cells = <1>;
-- reg = <0x900000 0x4000>;
+- msmgpio: gpio@800000 {
+- compatible = "qcom,msm-gpio";
+- reg = <0x00800000 0x4000>;
+- gpio-controller;
+- #gpio-cells = <2>;
+- ngpio = <173>;
+- interrupts = <0 16 0x4>;
+- interrupt-controller;
+- #interrupt-cells = <2>;
- };
+ msmgpio: gpio@800000 {
+ compatible = "qcom,msm-gpio";
+ #interrupt-cells = <2>;
+ };
+- gcc: clock-controller@900000 {
+- compatible = "qcom,gcc-msm8660";
+- #clock-cells = <1>;
+- #reset-cells = <1>;
+- reg = <0x900000 0x4000>;
+- };
++ gcc: clock-controller@900000 {
++ compatible = "qcom,gcc-msm8660";
++ #clock-cells = <1>;
++ #reset-cells = <1>;
++ reg = <0x900000 0x4000>;
++ };
+
- serial@19c40000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x19c40000 0x1000>,
- clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
- clock-names = "core", "iface";
- };
-+ gcc: clock-controller@900000 {
-+ compatible = "qcom,gcc-msm8660";
-+ #clock-cells = <1>;
-+ #reset-cells = <1>;
-+ reg = <0x900000 0x4000>;
-+ };
-+
+ gsbi12: gsbi@19c00000 {
+ compatible = "qcom,gsbi-v1.0.0";
+ reg = <0x19c00000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
-
-- qcom,ssbi@500000 {
-- compatible = "qcom,ssbi";
-- reg = <0x500000 0x1000>;
-- qcom,controller-type = "pmic-arbiter";
++
+ serial@19c40000 {
+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+ reg = <0x19c40000 0x1000>,
+ status = "disabled";
+ };
+ };
-+
+
+- qcom,ssbi@500000 {
+- compatible = "qcom,ssbi";
+- reg = <0x500000 0x1000>;
+- qcom,controller-type = "pmic-arbiter";
+ qcom,ssbi@500000 {
+ compatible = "qcom,ssbi";
+ reg = <0x500000 0x1000>;
+ };
};
};
---
-1.7.10.4
-
create mode 100644 arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
create mode 100644 arch/arm/boot/dts/qcom-apq8064.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 4a89023..ee3dfea 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -231,9 +231,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+@@ -231,9 +231,11 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420
dra7-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
-diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
-new file mode 100644
-index 0000000..7c2441d
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -0,0 +1,16 @@
+ };
+ };
+};
-diff --git a/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
-new file mode 100644
-index 0000000..935c394
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064-v2.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-apq8064.dtsi"
-diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
-new file mode 100644
-index 0000000..92bf793
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -0,0 +1,170 @@
+ };
+ };
+};
-diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
-index bae617e..350fa8d 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -15,9 +15,10 @@
NULL
};
---
-1.7.10.4
-
2 files changed, 7 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8084-mtp.dts
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index ee3dfea..f2aeb95 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+@@ -234,6 +234,7 @@ dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-ifc6410.dtb \
qcom-apq8074-dragonboard.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-diff --git a/arch/arm/boot/dts/qcom-apq8084-mtp.dts b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
-new file mode 100644
-index 0000000..9dae387
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084-mtp.dts
@@ -0,0 +1,6 @@
+ model = "Qualcomm APQ 8084-MTP";
+ compatible = "qcom,apq8084-mtp", "qcom,apq8084";
+};
---
-1.7.10.4
-
2 files changed, 180 insertions(+)
create mode 100644 arch/arm/boot/dts/qcom-apq8084.dtsi
-diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
-new file mode 100644
-index 0000000..e3e009a
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -0,0 +1,179 @@
+ };
+ };
+};
-diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
-index 350fa8d..c437a99 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
@@ -17,6 +17,7 @@
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
NULL
---
-1.7.10.4
-
arch/arm/mach-msm/Kconfig | 3 --
3 files changed, 38 insertions(+), 92 deletions(-)
-diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
-index 4491c7b..1a5895d 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -353,56 +353,39 @@ choice
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
-diff --git a/arch/arm/include/debug/msm.S b/arch/arm/include/debug/msm.S
-index 9d653d4..9ef5761 100644
--- a/arch/arm/include/debug/msm.S
+++ b/arch/arm/include/debug/msm.S
@@ -15,51 +15,15 @@
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
tst \rd, #0x08
-diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
-index a7f959e..9b26976 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -42,9 +42,6 @@ config ARCH_QSD8X50
config MSM_SOC_REV_A
bool
---
-1.7.10.4
-
arch/arm/Kconfig.debug | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
-index 1a5895d..7820af1 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -380,6 +380,7 @@ choice
MSM8X60 0x19c40000 0xf0040000
MSM8960 0x16440000 0xf0040000
MSM8974 0xf991e000 0xfa71e000
---
-1.7.10.4
-
arch/arm/mach-qcom/Kconfig | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
-index 6440c11..63502cc 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -2,6 +2,7 @@ config ARCH_QCOM
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
select HAVE_SMP
---
-1.7.10.4
-
drivers/clk/qcom/gcc-msm8660.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
-diff --git a/drivers/clk/qcom/gcc-msm8660.c b/drivers/clk/qcom/gcc-msm8660.c
-index 44bc6fa..0c4b727 100644
--- a/drivers/clk/qcom/gcc-msm8660.c
+++ b/drivers/clk/qcom/gcc-msm8660.c
-@@ -2718,6 +2718,18 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_match_table);
+@@ -2718,6 +2718,18 @@ MODULE_DEVICE_TABLE(of, gcc_msm8660_matc
static int gcc_msm8660_probe(struct platform_device *pdev)
{
return qcom_cc_probe(pdev, &gcc_msm8660_desc);
}
---
-1.7.10.4
-
drivers/clk/qcom/gcc-msm8974.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
-index 0d1edc1..7a420fc 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
-@@ -1341,7 +1341,7 @@ static struct clk_branch gcc_blsp1_uart6_apps_clk = {
+@@ -1341,7 +1341,7 @@ static struct clk_branch gcc_blsp1_uart6
};
static struct clk_branch gcc_blsp2_ahb_clk = {
.halt_check = BRANCH_HALT_VOTED,
.clkr = {
.enable_reg = 0x1484,
---
-1.7.10.4
-
drivers/clk/qcom/clk-rcg2.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
-diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
-index 0996a3a..cbecaec 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
-@@ -181,7 +181,8 @@ struct freq_tbl *find_freq(const struct freq_tbl *f, unsigned long rate)
+@@ -181,7 +181,8 @@ struct freq_tbl *find_freq(const struct
if (rate <= f->freq)
return f;
}
static long _freq_tbl_determine_rate(struct clk_hw *hw,
---
-1.7.10.4
-
drivers/clk/qcom/clk-rcg2.c | 299 ++++++++++++++++++++++++++++++++++++++++---
2 files changed, 287 insertions(+), 15 deletions(-)
-diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
-index 1d6b6de..b9ec11d 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -155,5 +155,8 @@ struct clk_rcg2 {
+extern const struct clk_ops clk_pixel_ops;
#endif
-diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
-index cbecaec..cd185d5 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -19,6 +19,7 @@
#include <asm/div64.h>
-@@ -225,31 +226,25 @@ static long clk_rcg2_determine_rate(struct clk_hw *hw, unsigned long rate,
+@@ -225,31 +226,25 @@ static long clk_rcg2_determine_rate(stru
return _freq_tbl_determine_rate(hw, rcg->freq_tbl, rate, p_rate, p);
}
if (ret)
return ret;
}
-@@ -260,14 +255,26 @@ static int __clk_rcg2_set_rate(struct clk_hw *hw, unsigned long rate)
+@@ -260,14 +255,26 @@ static int __clk_rcg2_set_rate(struct cl
cfg |= rcg->parent_map[f->src] << CFG_SRC_SEL_SHIFT;
if (rcg->mnd_width && f->n)
cfg |= CFG_MODE_DUAL_EDGE;
+ .determine_rate = clk_pixel_determine_rate,
+};
+EXPORT_SYMBOL_GPL(clk_pixel_ops);
---
-1.7.10.4
-
drivers/clk/qcom/mmcc-msm8974.c | 105 ++++++++++++++++++++-------------------
1 file changed, 54 insertions(+), 51 deletions(-)
-diff --git a/drivers/clk/qcom/mmcc-msm8974.c b/drivers/clk/qcom/mmcc-msm8974.c
-index 62200bb..c65b905 100644
--- a/drivers/clk/qcom/mmcc-msm8974.c
+++ b/drivers/clk/qcom/mmcc-msm8974.c
@@ -41,9 +41,11 @@
static const u8 mmcc_xo_mmpll0_mmpll1_gpll0_map[] = {
[P_XO] = 0,
-@@ -161,6 +163,24 @@ static const char *mmcc_xo_dsi_hdmi_edp_gpll0[] = {
+@@ -161,6 +163,24 @@ static const char *mmcc_xo_dsi_hdmi_edp_
"dsi1pll",
};
},
};
-@@ -826,12 +836,12 @@ static struct clk_rcg2 edplink_clk_src = {
+@@ -826,12 +836,12 @@ static struct clk_rcg2 edplink_clk_src =
.parent_names = mmcc_xo_dsi_hdmi_edp_gpll0,
.num_parents = 6,
.ops = &clk_rcg2_ops,
{ }
};
-@@ -840,12 +850,12 @@ static struct clk_rcg2 edppixel_clk_src = {
+@@ -840,12 +850,12 @@ static struct clk_rcg2 edppixel_clk_src
.mnd_width = 8,
.hid_width = 5,
.parent_map = mmcc_xo_dsi_hdmi_edp_map,
},
};
-@@ -857,11 +867,11 @@ static struct freq_tbl ftbl_mdss_esc0_1_clk[] = {
+@@ -857,11 +867,11 @@ static struct freq_tbl ftbl_mdss_esc0_1_
static struct clk_rcg2 esc0_clk_src = {
.cmd_rcgr = 0x2160,
.hid_width = 5,
{ }
};
-@@ -897,12 +899,13 @@ static struct clk_rcg2 extpclk_clk_src = {
+@@ -897,12 +899,13 @@ static struct clk_rcg2 extpclk_clk_src =
.cmd_rcgr = 0x2060,
.hid_width = 5,
.parent_map = mmcc_xo_dsi_hdmi_edp_gpll0_map,
},
};
---
-1.7.10.4
-
include/dt-bindings/clock/qcom,gcc-msm8974.h | 4 +
3 files changed, 130 insertions(+), 6 deletions(-)
-diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
-index 7b7104e..9cfcb4f 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -8,6 +8,8 @@ Required properties :
- reg : shall contain base register location and length
- #clock-cells : shall contain 1
-diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
-index 7a420fc..7af7c18 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -35,6 +35,7 @@
static const struct freq_tbl ftbl_gcc_usb30_master_clk[] = {
F(125000000, P_GPLL0, 1, 5, 24),
{ }
-@@ -812,18 +852,33 @@ static const struct freq_tbl ftbl_gcc_sdcc1_4_apps_clk[] = {
+@@ -812,18 +852,33 @@ static const struct freq_tbl ftbl_gcc_sd
{ }
};
};
static struct clk_rcg2 sdcc2_apps_clk_src = {
-@@ -1995,6 +2050,38 @@ static struct clk_branch gcc_sdcc1_apps_clk = {
+@@ -1995,6 +2050,38 @@ static struct clk_branch gcc_sdcc1_apps_
},
};
static struct clk_branch gcc_sdcc2_ahb_clk = {
.halt_reg = 0x0508,
.clkr = {
-@@ -2484,6 +2571,10 @@ static struct clk_regmap *gcc_msm8974_clocks[] = {
+@@ -2484,6 +2571,10 @@ static struct clk_regmap *gcc_msm8974_cl
[GCC_USB_HSIC_IO_CAL_SLEEP_CLK] = &gcc_usb_hsic_io_cal_sleep_clk.clkr,
[GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr,
[GCC_MMSS_GPLL0_CLK_SRC] = &gcc_mmss_gpll0_clk_src,
};
static const struct qcom_reset_map gcc_msm8974_resets[] = {
-@@ -2585,14 +2676,41 @@ static const struct qcom_cc_desc gcc_msm8974_desc = {
+@@ -2585,14 +2676,41 @@ static const struct qcom_cc_desc gcc_msm
static const struct of_device_id gcc_msm8974_match_table[] = {
{ .compatible = "qcom,gcc-msm8974" },
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
-diff --git a/include/dt-bindings/clock/qcom,gcc-msm8974.h b/include/dt-bindings/clock/qcom,gcc-msm8974.h
-index 223ca17..51e51c8 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8974.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h
@@ -316,5 +316,9 @@
+#define GCC_SDCC1_CDCCAL_FF_CLK 305
#endif
---
-1.7.10.4
-
drivers/clk/qcom/common.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
-diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
-index 86b45fb..9b5a1cf 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
-@@ -62,8 +62,10 @@ int qcom_cc_probe(struct platform_device *pdev, const struct qcom_cc_desc *desc)
+@@ -62,8 +62,10 @@ int qcom_cc_probe(struct platform_device
data->clk_num = num_clks;
for (i = 0; i < num_clks; i++) {
clk = devm_clk_register_regmap(dev, rclks[i]);
if (IS_ERR(clk))
return PTR_ERR(clk);
---
-1.7.10.4
-
drivers/ata/sata_highbank.c | 3 ++-
4 files changed, 31 insertions(+), 10 deletions(-)
-diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
-index c81d809..8bfc477 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
-@@ -578,6 +578,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+@@ -583,6 +583,7 @@ static int ahci_vt8251_hardreset(struct
unsigned long deadline)
{
struct ata_port *ap = link->ap;
bool online;
int rc;
-@@ -588,7 +589,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+@@ -593,7 +594,7 @@ static int ahci_vt8251_hardreset(struct
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-@@ -603,6 +604,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+@@ -608,6 +609,7 @@ static int ahci_p5wdh_hardreset(struct a
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
-@@ -618,7 +620,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+@@ -623,7 +625,7 @@ static int ahci_p5wdh_hardreset(struct a
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 2289efd..64d1a99 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
-@@ -323,6 +323,12 @@ struct ahci_host_priv {
+@@ -324,6 +324,12 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
struct clk *clk; /* Only for platforms supporting clk */
void *plat_data; /* Other platform data */
};
extern int ahci_ignore_sss;
-diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
-index 36605ab..f839bb3 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
-@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(struct device *dev,
+@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(st
*
* If inconsistent, config values are fixed up by this function.
*
* LOCKING:
* None.
*/
-@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct device *dev,
+@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct dev
hpriv->cap = cap;
hpriv->cap2 = cap2;
hpriv->port_map = port_map;
}
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
-@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_port *ap)
+@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_p
/* enable DMA */
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
-@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap)
+@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap
/* restart engine */
out_restart:
return rc;
}
EXPORT_SYMBOL_GPL(ahci_kick_engine);
-@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_lin
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
-@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_lin
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
if (online)
*class = ahci_dev_classify(ap);
-@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *ap)
+@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *a
void ahci_error_handler(struct ata_port *ap)
{
}
sata_pmp_error_handler(ap);
-@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struc
static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_device *dev = ap->link.device;
u32 devslp, dm, dito, mdat, deto;
-@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
+@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(s
PORT_DEVSLP_ADSE);
writel(devslp, port_mmio + PORT_DEVSLP);
/* enable device sleep feature for the drive */
err_mask = ata_dev_set_feature(dev,
-@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
+@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(s
static void ahci_enable_fbs(struct ata_port *ap)
{
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
-@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_port *ap)
+@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_p
} else
dev_err(ap->host->dev, "Failed to enable FBS\n");
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
-@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
+@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_
pp->fbs_enabled = false;
}
}
static void ahci_pmp_attach(struct ata_port *ap)
-diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
-index 870b11e..b3b18d1 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
-@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
+@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struc
static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
-@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
+@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struc
break;
} while (!online && retry--);
if (online)
*class = ahci_dev_classify(ap);
---
-1.7.10.4
-
include/linux/ahci_platform.h | 4 +
4 files changed, 93 insertions(+), 28 deletions(-)
-diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-index 89de156..3ced07d 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -10,6 +10,7 @@ Required properties:
Example:
sata@ffe08000 {
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 64d1a99..c12862b 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -51,6 +51,7 @@
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
-@@ -321,7 +322,7 @@ struct ahci_host_priv {
+@@ -322,7 +323,7 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 4b231ba..2342a42 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -87,6 +87,60 @@ static struct scsi_host_template ahci_platform_sht = {
+@@ -87,6 +87,60 @@ static struct scsi_host_template ahci_pl
AHCI_SHT("ahci_platform"),
};
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
-@@ -97,6 +151,7 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -97,6 +151,7 @@ static int ahci_probe(struct platform_de
struct ahci_host_priv *hpriv;
struct ata_host *host;
struct resource *mem;
int irq;
int n_ports;
int i;
-@@ -131,17 +186,31 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -131,17 +186,31 @@ static int ahci_probe(struct platform_de
return -ENOMEM;
}
return rc;
}
-@@ -239,10 +306,8 @@ static void ahci_host_stop(struct ata_host *host)
+@@ -239,10 +306,8 @@ static void ahci_host_stop(struct ata_ho
if (pdata && pdata->exit)
pdata->exit(dev);
}
#ifdef CONFIG_PM_SLEEP
-@@ -277,8 +342,7 @@ static int ahci_suspend(struct device *dev)
+@@ -277,8 +342,7 @@ static int ahci_suspend(struct device *d
if (pdata && pdata->suspend)
return pdata->suspend(dev);
return 0;
}
-@@ -290,13 +354,9 @@ static int ahci_resume(struct device *dev)
+@@ -290,13 +354,9 @@ static int ahci_resume(struct device *de
struct ahci_host_priv *hpriv = host->private_data;
int rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
-@@ -317,8 +377,7 @@ static int ahci_resume(struct device *dev)
+@@ -317,8 +377,7 @@ static int ahci_resume(struct device *de
return 0;
disable_unprepare_clk:
return rc;
}
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index 73a2500..769d065 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -19,6 +19,7 @@
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
+
#endif /* _AHCI_PLATFORM_H */
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 36 ++++++++++++++++++--
3 files changed, 37 insertions(+), 2 deletions(-)
-diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-index 3ced07d..1ac807f 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -11,6 +11,7 @@ Required properties:
Example:
sata@ffe08000 {
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index c12862b..bf8100c 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
/* Enclosure Management Control */
#define EM_CTRL_MSG_TYPE 0x000f0000
-@@ -323,6 +324,7 @@ struct ahci_host_priv {
+@@ -324,6 +325,7 @@ struct ahci_host_priv {
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 2342a42..8f18ebe 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -186,6 +186,14 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -186,6 +186,14 @@ static int ahci_probe(struct platform_de
return -ENOMEM;
}
for (i = 0; i < AHCI_MAX_CLKS; i++) {
/*
* For now we must use clk_get(dev, NULL) for the first clock,
-@@ -207,9 +215,15 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -207,9 +215,15 @@ static int ahci_probe(struct platform_de
hpriv->clks[i] = clk;
}
free_clk:
ahci_put_clks(hpriv);
return rc;
-@@ -308,6 +325,9 @@ static void ahci_host_stop(struct ata_host *host)
+@@ -308,6 +325,9 @@ static void ahci_host_stop(struct ata_ho
ahci_disable_clks(hpriv);
ahci_put_clks(hpriv);
}
#ifdef CONFIG_PM_SLEEP
-@@ -344,6 +364,9 @@ static int ahci_suspend(struct device *dev)
+@@ -344,6 +364,9 @@ static int ahci_suspend(struct device *d
ahci_disable_clks(hpriv);
return 0;
}
-@@ -354,9 +377,15 @@ static int ahci_resume(struct device *dev)
+@@ -354,9 +377,15 @@ static int ahci_resume(struct device *de
struct ahci_host_priv *hpriv = host->private_data;
int rc;
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
-@@ -378,6 +407,9 @@ static int ahci_resume(struct device *dev)
+@@ -378,6 +407,9 @@ static int ahci_resume(struct device *de
disable_unprepare_clk:
ahci_disable_clks(hpriv);
return rc;
}
---
-1.7.10.4
-
include/linux/ahci_platform.h | 2 +
2 files changed, 71 insertions(+), 37 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 8f18ebe..656d285 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -133,6 +133,62 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+@@ -133,6 +133,62 @@ void ahci_platform_disable_clks(struct a
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
static void ahci_put_clks(struct ahci_host_priv *hpriv)
{
int c;
-@@ -215,15 +271,9 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -215,15 +271,9 @@ static int ahci_probe(struct platform_de
hpriv->clks[i] = clk;
}
/*
* Some platforms might need to prepare for mmio region access,
-@@ -234,7 +284,7 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -234,7 +284,7 @@ static int ahci_probe(struct platform_de
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
}
ahci_save_initial_config(dev, hpriv,
-@@ -304,11 +354,8 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -304,11 +354,8 @@ static int ahci_probe(struct platform_de
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
free_clk:
ahci_put_clks(hpriv);
return rc;
-@@ -323,11 +370,8 @@ static void ahci_host_stop(struct ata_host *host)
+@@ -323,11 +370,8 @@ static void ahci_host_stop(struct ata_ho
if (pdata && pdata->exit)
pdata->exit(dev);
}
#ifdef CONFIG_PM_SLEEP
-@@ -362,10 +406,7 @@ static int ahci_suspend(struct device *dev)
+@@ -362,10 +406,7 @@ static int ahci_suspend(struct device *d
if (pdata && pdata->suspend)
return pdata->suspend(dev);
return 0;
}
-@@ -377,26 +418,20 @@ static int ahci_resume(struct device *dev)
+@@ -377,26 +418,20 @@ static int ahci_resume(struct device *de
struct ahci_host_priv *hpriv = host->private_data;
int rc;
ahci_init_controller(host);
}
-@@ -405,11 +440,8 @@ static int ahci_resume(struct device *dev)
+@@ -405,11 +440,8 @@ static int ahci_resume(struct device *de
return 0;
return rc;
}
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index 769d065..b674b01 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -33,5 +33,7 @@ struct ahci_platform_data {
+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
#endif /* _AHCI_PLATFORM_H */
---
-1.7.10.4
-
drivers/ata/sata_vsc.c | 1 -
68 files changed, 68 deletions(-)
-diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
-index fd665d9..b51605a 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -36,7 +36,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
-index 8bfc477..a52a5b6 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -35,7 +35,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 656d285..a32df31 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -17,7 +17,6 @@
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
-diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
-index 7d19665..9498a7d 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -19,7 +19,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
-index f839bb3..fa02770 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -35,7 +35,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
-index 62c9ac8..5108b87 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -7,7 +7,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
-index d23e2b3..1206fa6 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -17,7 +17,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
-index 1581dee..3aa4e65 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -19,7 +19,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
-index d63ee8f..e9c8727 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -18,7 +18,6 @@
#include <linux/blkdev.h>
#include <linux/gfp.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
-index 24e5105..30fa4ca 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -15,7 +15,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
-index 2ca5026..7e73a0f 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -29,7 +29,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
-index 8fb69e5..57f1be6 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -15,7 +15,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/gfp.h>
-diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
-index 1275a8d..6bca350 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -26,7 +26,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
-index f10baab..bcde4b7 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -34,7 +34,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
-index f07f229..8afe854 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -26,7 +26,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
-index 997e16a..2c0986f 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -31,7 +31,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
-index 0448860..32ddcae 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -33,7 +33,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/libata.h>
-diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
-index 810bc99..3435bd6 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -11,7 +11,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
-index 3c12fd7..f440892 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -14,7 +14,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_ep93xx.c b/drivers/ata/pata_ep93xx.c
-index 980b88e..cad9d45 100644
--- a/drivers/ata/pata_ep93xx.c
+++ b/drivers/ata/pata_ep93xx.c
@@ -34,7 +34,6 @@
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
-diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
-index 35b5213..8e76f79 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -19,7 +19,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
-index a9d74ef..3ba843f 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -19,7 +19,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
-index 4be0398..b93c0f0 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -20,7 +20,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
-index 85cf286..255c5aa 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -16,7 +16,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c
-index b0b18ec..7e69797 100644
--- a/drivers/ata/pata_imx.c
+++ b/drivers/ata/pata_imx.c
@@ -15,7 +15,6 @@
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
-diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
-index 2a8dd95..81369d1 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -10,7 +10,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
-index 581e04d..dc3d787 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -72,7 +72,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/slab.h>
-diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
-index 76e739b0..b1cfa02 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -10,7 +10,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
-index a4f5e78..6bad3df 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -11,7 +11,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
-index 1f5f28b..f39a537 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -28,7 +28,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
-index ad1a0fe..e3b9709 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -7,7 +7,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
-index 9513e07..56201a6 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -37,7 +37,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
-index 0c424da..6154c3e 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -20,7 +20,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
-index 16dc3a6..d44df7c 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -25,7 +25,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
-index d77b2e1..319b644 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -16,7 +16,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
-index 4ea70cd..fb042e0 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -26,7 +26,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
-index 78ede3f..bb71ea2 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -25,7 +25,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
-index 40254f4..bcc4b96 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -26,7 +26,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/slab.h>
-diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
-index 9d874c8..1151f23 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -25,7 +25,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
-index c34fc50..defa050 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -15,7 +15,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
-index 2beb6b5..0b46be1 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -18,7 +18,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
-index 0279488..a5579b5 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -13,7 +13,6 @@
#include <linux/blkdev.h>
#include <scsi/scsi_host.h>
#include <linux/ata.h>
-diff --git a/drivers/ata/pata_pxa.c b/drivers/ata/pata_pxa.c
-index a6f05ac..73259bf 100644
--- a/drivers/ata/pata_pxa.c
+++ b/drivers/ata/pata_pxa.c
@@ -20,7 +20,6 @@
#include <linux/blkdev.h>
#include <linux/ata.h>
#include <linux/libata.h>
-diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
-index f582ba1..be3f102 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -15,7 +15,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
-index 79a970f..521b213 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -24,7 +24,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
-index 040b093..caedc90 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -14,7 +14,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
-index ce2f828..96a232f 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -32,7 +32,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
-index f35f15f..f1f5b5a 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -35,7 +35,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
-index d3830c4..5a1cde0 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -27,7 +27,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
-index 96c6a79..e27f31f 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -34,7 +34,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
-index c4b0b07..73fe362 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -25,7 +25,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
-index 1e83636..78d913a 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -26,7 +26,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
-index 6816911..900f0e4 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -19,7 +19,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
-index 94473da..7bc78e2 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -36,7 +36,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
-diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
-index c3ab9a6..f6c9632 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -55,7 +55,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/gfp.h>
-diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
-index 8ea6e6a..f10631b 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -36,7 +36,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
-index 523524b..73510d0 100644
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -29,7 +29,6 @@
#include <linux/device.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
-index b3b18d1..d4df0bf 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -19,7 +19,6 @@
#include <linux/types.h>
#include <linux/err.h>
#include <linux/io.h>
-diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
-index d74def8..ba5f271 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -40,7 +40,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
-index 97f4acb..3638887 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -35,7 +35,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
-index 3b0dd57..9a6bd4c 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -31,7 +31,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
-index b7695e8..3062f86 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -37,7 +37,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
-index 1ad2f62..b513428 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -33,7 +33,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
-index dc4f701..c630fa8 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -39,7 +39,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
-index 9947010..6cd0312 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -82,7 +82,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
-index 6d64891..08f98c3 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -28,7 +28,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
-diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
-index 87f056e..f72e842 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -36,7 +36,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
-diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
-index 44f304b..29e847a 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -37,7 +37,6 @@
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
---
-1.7.10.4
-
include/linux/ahci_platform.h | 14 +++
2 files changed, 137 insertions(+), 65 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index a32df31..19e9eaa 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -188,64 +188,60 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
+@@ -188,64 +188,60 @@ void ahci_platform_disable_resources(str
}
EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
- dev_err(dev, "no mmio space\n");
- return -EINVAL;
- }
--
++ if (!devres_open_group(dev, NULL, GFP_KERNEL))
++ return ERR_PTR(-ENOMEM);
+
- irq = platform_get_irq(pdev, 0);
- if (irq <= 0) {
- dev_err(dev, "no irq\n");
- return -EINVAL;
- }
-+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
-+ return ERR_PTR(-ENOMEM);
-
+-
- if (pdata && pdata->ata_port_info)
- pi = *pdata->ata_port_info;
--
-- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-- if (!hpriv) {
-- dev_err(dev, "can't alloc ahci_host_priv\n");
-- return -ENOMEM;
-- }
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
-- hpriv->flags |= (unsigned long)pi.private_data;
+- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+- if (!hpriv) {
+- dev_err(dev, "can't alloc ahci_host_priv\n");
+- return -ENOMEM;
+- }
+ devres_add(dev, hpriv);
+- hpriv->flags |= (unsigned long)pi.private_data;
+-
- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
hpriv->target_pwr = NULL;
}
-@@ -264,33 +260,59 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -264,33 +260,59 @@ static int ahci_probe(struct platform_de
if (IS_ERR(clk)) {
rc = PTR_ERR(clk);
if (rc == -EPROBE_DEFER)
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
-@@ -307,10 +329,8 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -307,10 +329,8 @@ static int ahci_probe(struct platform_de
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
host->private_data = hpriv;
-@@ -325,7 +345,8 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -325,7 +345,8 @@ static int ahci_probe(struct platform_de
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
-@@ -339,13 +360,53 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -339,13 +360,53 @@ static int ahci_probe(struct platform_de
rc = ahci_reset_controller(host);
if (rc)
return rc;
}
-@@ -370,7 +429,6 @@ static void ahci_host_stop(struct ata_host *host)
+@@ -370,7 +429,6 @@ static void ahci_host_stop(struct ata_ho
pdata->exit(dev);
ahci_platform_disable_resources(hpriv);
}
#ifdef CONFIG_PM_SLEEP
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index b674b01..b80c51c 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -20,7 +20,14 @@
struct ahci_platform_data {
int (*init)(struct device *dev, void __iomem *addr);
void (*exit)(struct device *dev);
-@@ -35,5 +42,12 @@ int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
+@@ -35,5 +42,12 @@ int ahci_platform_enable_clks(struct ahc
void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
+ unsigned int mask_port_map);
#endif /* _AHCI_PLATFORM_H */
---
-1.7.10.4
-
include/linux/ahci_platform.h | 5 +++
2 files changed, 87 insertions(+), 15 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 19e9eaa..01f7bbe 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -432,14 +432,23 @@ static void ahci_host_stop(struct ata_host *host)
+@@ -432,14 +432,23 @@ static void ahci_host_stop(struct ata_ho
}
#ifdef CONFIG_PM_SLEEP
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
-@@ -456,7 +465,58 @@ static int ahci_suspend(struct device *dev)
+@@ -456,7 +465,58 @@ static int ahci_suspend(struct device *d
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
if (rc)
return rc;
-@@ -467,8 +527,19 @@ static int ahci_suspend(struct device *dev)
+@@ -467,8 +527,19 @@ static int ahci_suspend(struct device *d
return 0;
}
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
-@@ -485,15 +556,9 @@ static int ahci_resume(struct device *dev)
+@@ -485,15 +556,9 @@ static int ahci_resume(struct device *de
goto disable_resources;
}
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index b80c51c..542f268 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
-@@ -50,4 +50,9 @@ int ahci_platform_init_host(struct platform_device *pdev,
+@@ -50,4 +50,9 @@ int ahci_platform_init_host(struct platf
unsigned int force_port_map,
unsigned int mask_port_map);
+int ahci_platform_resume(struct device *dev);
+
#endif /* _AHCI_PLATFORM_H */
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 1 +
1 file changed, 1 insertion(+)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 01f7bbe..968e7d9 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -577,6 +577,7 @@ static const struct of_device_id ahci_of_match[] = {
+@@ -577,6 +577,7 @@ static const struct of_device_id ahci_of
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
{ .compatible = "ibm,476gtr-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++--
2 files changed, 47 insertions(+), 2 deletions(-)
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index bf8100c..3ab7ac9 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -37,6 +37,7 @@
#include <linux/regulator/consumer.h>
/* Enclosure Management Control */
-@@ -325,6 +326,7 @@ struct ahci_host_priv {
+@@ -326,6 +327,7 @@ struct ahci_host_priv {
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
void *plat_data; /* Other platform data */
/*
* Optional ahci_start_engine override, if not set this gets set to the
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 968e7d9..243dde3 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -22,6 +22,7 @@
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
-@@ -140,6 +141,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+@@ -140,6 +141,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_
* following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
*
* If resource enabling fails at any point the previous enabled resources
* are disabled in reverse order.
-@@ -161,8 +163,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+@@ -161,8 +163,23 @@ int ahci_platform_enable_resources(struc
if (rc)
goto disable_regulator;
disable_regulator:
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
-@@ -176,11 +193,17 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+@@ -176,11 +193,17 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_r
*
* This function disables all ahci_platform managed resources in the
* following order:
ahci_platform_disable_clks(hpriv);
if (hpriv->target_pwr)
-@@ -208,6 +231,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
+@@ -208,6 +231,7 @@ static void ahci_platform_put_resources(
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
*
* RETURNS:
* The allocated ahci_host_priv on success, otherwise an ERR_PTR value
-@@ -266,6 +290,25 @@ struct ahci_host_priv *ahci_platform_get_resources(
+@@ -266,6 +290,25 @@ struct ahci_host_priv *ahci_platform_get
hpriv->clks[i] = clk;
}
devres_remove_group(dev, NULL);
return hpriv;
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 15 +++++++++++++++
2 files changed, 16 insertions(+)
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 3ab7ac9..51af275 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
-@@ -324,6 +324,7 @@ struct ahci_host_priv {
+@@ -325,6 +325,7 @@ struct ahci_host_priv {
u32 em_loc; /* enclosure management location */
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
struct regulator *target_pwr; /* Optional */
struct phy *phy; /* If platform uses phy */
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 243dde3..fc32863 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -23,6 +23,7 @@
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
-@@ -216,6 +217,11 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
+@@ -216,6 +217,11 @@ static void ahci_platform_put_resources(
struct ahci_host_priv *hpriv = res;
int c;
for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
clk_put(hpriv->clks[c]);
}
-@@ -309,6 +315,10 @@ struct ahci_host_priv *ahci_platform_get_resources(
+@@ -309,6 +315,10 @@ struct ahci_host_priv *ahci_platform_get
}
}
devres_remove_group(dev, NULL);
return hpriv;
-@@ -603,6 +613,11 @@ int ahci_platform_resume(struct device *dev)
+@@ -603,6 +613,11 @@ int ahci_platform_resume(struct device *
if (rc)
goto disable_resources;
return 0;
disable_resources:
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 11 -----------
1 file changed, 11 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index fc32863..d3d2bad 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -31,7 +31,6 @@ static void ahci_host_stop(struct ata_host *host);
+@@ -31,7 +31,6 @@ static void ahci_host_stop(struct ata_ho
enum ahci_type {
AHCI, /* standard platform ahci */
IMX53_AHCI, /* ahci on i.mx53 */
};
static struct platform_device_id ahci_devtype[] = {
-@@ -42,9 +41,6 @@ static struct platform_device_id ahci_devtype[] = {
+@@ -42,9 +41,6 @@ static struct platform_device_id ahci_de
.name = "imx53-ahci",
.driver_data = IMX53_AHCI,
}, {
/* sentinel */
}
};
-@@ -75,13 +71,6 @@ static const struct ata_port_info ahci_port_info[] = {
+@@ -75,13 +71,6 @@ static const struct ata_port_info ahci_p
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_retry_srst_ops,
},
};
static struct scsi_host_template ahci_platform_sht = {
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 46 ++++++-------------------------------------
1 file changed, 6 insertions(+), 40 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index d3d2bad..8fab4bf 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -28,49 +28,17 @@
};
static struct scsi_host_template ahci_platform_sht = {
-@@ -416,7 +384,6 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -416,7 +384,6 @@ static int ahci_probe(struct platform_de
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev_get_platdata(dev);
const struct ata_port_info *pi_template;
struct ahci_host_priv *hpriv;
int rc;
-@@ -444,7 +411,7 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -444,7 +411,7 @@ static int ahci_probe(struct platform_de
if (pdata && pdata->ata_port_info)
pi_template = pdata->ata_port_info;
else
rc = ahci_platform_init_host(pdev, hpriv, pi_template,
pdata ? pdata->force_port_map : 0,
-@@ -638,7 +605,6 @@ static struct platform_driver ahci_driver = {
+@@ -638,7 +605,6 @@ static struct platform_driver ahci_drive
.of_match_table = ahci_of_match,
.pm = &ahci_pm_ops,
},
};
module_platform_driver(ahci_driver);
---
-1.7.10.4
-
include/linux/ahci_platform.h | 3 ---
2 files changed, 1 insertion(+), 12 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 8fab4bf..db24d2a 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -384,7 +384,6 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -384,7 +384,6 @@ static int ahci_probe(struct platform_de
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ahci_host_priv *hpriv;
int rc;
-@@ -408,14 +407,7 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -408,14 +407,7 @@ static int ahci_probe(struct platform_de
goto disable_resources;
}
if (rc)
goto pdata_exit;
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index 542f268..1f16d50 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -33,9 +33,6 @@ struct ahci_platform_data {
};
int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index db24d2a..70fbf66 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -199,8 +199,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
+@@ -199,8 +199,7 @@ static void ahci_platform_put_resources(
* RETURNS:
* The allocated ahci_host_priv on success, otherwise an ERR_PTR value
*/
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
-@@ -219,8 +218,9 @@ struct ahci_host_priv *ahci_platform_get_resources(
+@@ -219,8 +218,9 @@ struct ahci_host_priv *ahci_platform_get
hpriv->mmio = devm_ioremap_resource(dev,
platform_get_resource(pdev, IORESOURCE_MEM, 0));
goto err_out;
}
---
-1.7.10.4
-
drivers/ata/ahci_platform.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 70fbf66..7bd6adf 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -521,12 +521,19 @@ int ahci_platform_suspend(struct device *dev)
+@@ -521,12 +521,19 @@ int ahci_platform_suspend(struct device
if (rc)
return rc;
}
EXPORT_SYMBOL_GPL(ahci_platform_suspend);
---
-1.7.10.4
-
4 files changed, 544 insertions(+), 518 deletions(-)
create mode 100644 drivers/ata/libahci_platform.c
-diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
-index 868429a..dc950f3 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -99,7 +99,7 @@ config SATA_AHCI_PLATFORM
help
This option enables support for the Freescale i.MX SoC's
onboard AHCI SATA.
-diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
-index 46518c6..366b743 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -4,13 +4,13 @@ obj-$(CONFIG_ATA) += libata.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 7bd6adf..ef67e79 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -12,28 +12,15 @@
static const struct ata_port_info ahci_port_info = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
-@@ -41,345 +28,6 @@ static const struct ata_port_info ahci_port_info = {
+@@ -41,345 +28,6 @@ static const struct ata_port_info ahci_p
.port_ops = &ahci_platform_ops,
};
static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_platform_suspend,
ahci_platform_resume);
-diff --git a/drivers/ata/libahci_platform.c b/drivers/ata/libahci_platform.c
-new file mode 100644
-index 0000000..7cb3a85
--- /dev/null
+++ b/drivers/ata/libahci_platform.c
@@ -0,0 +1,541 @@
+MODULE_DESCRIPTION("AHCI SATA platform library");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_LICENSE("GPL");
---
-1.7.10.4
-
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq806x.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq806x.h
-diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
-index 9cfcb4f..0171509 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt
@@ -5,6 +5,7 @@ Required properties :
"qcom,gcc-msm8660"
"qcom,gcc-msm8960"
"qcom,gcc-msm8974"
-diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
-index 7f696b7..cfaa54c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -4,6 +4,14 @@ config COMMON_CLK_QCOM
config MSM_GCC_8660
tristate "MSM8660 Global Clock Controller"
depends on COMMON_CLK_QCOM
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index 689e05b..df2a1b3 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -8,6 +8,7 @@ clk-qcom-y += clk-rcg2.o
obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
-diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
-new file mode 100644
-index 0000000..278c5fe
--- /dev/null
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -0,0 +1,2424 @@
+MODULE_DESCRIPTION("QCOM GCC IPQ806x Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:gcc-ipq806x");
-diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
-new file mode 100644
-index 0000000..3b0f8e7
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -0,0 +1,293 @@
+#define UBI32_CORE2_CLK 279
+
+#endif
-diff --git a/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
-new file mode 100644
-index 0000000..0ad5ef9
--- /dev/null
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -0,0 +1,132 @@
+#define NSSFB0_RESET 113
+#define NSSFB1_RESET 114
+#endif
---
-1.7.10.4
-
include/linux/clk-provider.h | 1 +
3 files changed, 49 insertions(+), 7 deletions(-)
-diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
-index b94a311..0582068 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
-@@ -1356,6 +1356,7 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
+@@ -1356,6 +1356,7 @@ static void clk_calc_subtree(struct clk
struct clk *new_parent, u8 p_index)
{
struct clk *child;
clk->new_rate = new_rate;
clk->new_parent = new_parent;
-@@ -1365,6 +1366,17 @@ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
+@@ -1365,6 +1366,17 @@ static void clk_calc_subtree(struct clk
if (new_parent && new_parent != clk->parent)
new_parent->new_child = clk;
fail_clk = clk;
}
-@@ -1499,7 +1539,8 @@ static void clk_change_rate(struct clk *clk)
+@@ -1499,7 +1539,8 @@ static void clk_change_rate(struct clk *
else if (clk->parent)
best_parent_rate = clk->parent->rate;
old_parent = __clk_set_parent_before(clk, clk->new_parent);
if (clk->ops->set_rate_and_parent) {
-@@ -1522,9 +1563,6 @@ static void clk_change_rate(struct clk *clk)
+@@ -1522,9 +1563,6 @@ static void clk_change_rate(struct clk *
else
clk->rate = best_parent_rate;
hlist_for_each_entry(child, &clk->children, child_node) {
/* Skip children who will be reparented to another clock */
if (child->new_parent && child->new_parent != clk)
-@@ -1598,6 +1636,7 @@ int clk_set_rate(struct clk *clk, unsigned long rate)
+@@ -1598,6 +1636,7 @@ int clk_set_rate(struct clk *clk, unsign
/* change the rates */
clk_change_rate(top);
out:
clk_prepare_unlock();
-diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
-index efbf70b..f48684a 100644
--- a/include/linux/clk-private.h
+++ b/include/linux/clk-private.h
@@ -38,8 +38,10 @@ struct clk {
struct clk *new_parent;
struct clk *new_child;
unsigned long flags;
-diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
-index 939533d..300fcb8 100644
--- a/include/linux/clk-provider.h
+++ b/include/linux/clk-provider.h
@@ -157,6 +157,7 @@ struct clk_ops {
int (*set_rate)(struct clk_hw *hw, unsigned long,
unsigned long);
int (*set_rate_and_parent)(struct clk_hw *hw,
---
-1.7.10.4
-
drivers/clk/qcom/clk-pll.h | 20 +++++++++++++
2 files changed, 87 insertions(+), 1 deletion(-)
-diff --git a/drivers/clk/qcom/clk-pll.c b/drivers/clk/qcom/clk-pll.c
-index 0f927c5..80c7a76 100644
--- a/drivers/clk/qcom/clk-pll.c
+++ b/drivers/clk/qcom/clk-pll.c
@@ -97,7 +97,7 @@ static unsigned long
unsigned long rate;
u64 tmp;
-@@ -116,13 +116,79 @@ clk_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+@@ -116,13 +116,79 @@ clk_pll_recalc_rate(struct clk_hw *hw, u
do_div(tmp, n);
rate += tmp;
}
};
EXPORT_SYMBOL_GPL(clk_pll_ops);
-diff --git a/drivers/clk/qcom/clk-pll.h b/drivers/clk/qcom/clk-pll.h
-index 0775a99..5f9928b 100644
--- a/drivers/clk/qcom/clk-pll.h
+++ b/drivers/clk/qcom/clk-pll.h
@@ -18,6 +18,21 @@
struct clk_regmap clkr;
};
---
-1.7.10.4
-
drivers/clk/qcom/mmcc-msm8960.c | 24 +++++++---
3 files changed, 73 insertions(+), 55 deletions(-)
-diff --git a/drivers/clk/qcom/clk-rcg.c b/drivers/clk/qcom/clk-rcg.c
-index abfc2b6..7bce729 100644
--- a/drivers/clk/qcom/clk-rcg.c
+++ b/drivers/clk/qcom/clk-rcg.c
-@@ -67,16 +67,16 @@ static u8 clk_dyn_rcg_get_parent(struct clk_hw *hw)
+@@ -67,16 +67,16 @@ static u8 clk_dyn_rcg_get_parent(struct
{
struct clk_dyn_rcg *rcg = to_clk_dyn_rcg(hw);
int num_parents = __clk_get_num_parents(hw->clk);
ns = ns_to_src(s, ns);
for (i = 0; i < num_parents; i++)
-@@ -192,90 +192,93 @@ static u32 mn_to_reg(struct mn *mn, u32 m, u32 n, u32 val)
+@@ -192,90 +192,93 @@ static u32 mn_to_reg(struct mn *mn, u32
static void configure_bank(struct clk_dyn_rcg *rcg, const struct freq_tbl *f)
{
configure_bank(rcg, &f);
return 0;
-@@ -336,28 +339,30 @@ clk_dyn_rcg_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
+@@ -336,28 +339,30 @@ clk_dyn_rcg_recalc_rate(struct clk_hw *h
u32 m, n, pre_div, ns, md, mode, reg;
int bank;
struct mn *mn;
}
static const
-diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h
-index b9ec11d..5f8b06d 100644
--- a/drivers/clk/qcom/clk-rcg.h
+++ b/drivers/clk/qcom/clk-rcg.h
@@ -102,7 +102,7 @@ extern const struct clk_ops clk_rcg_ops;
u8 mux_sel_bit;
-diff --git a/drivers/clk/qcom/mmcc-msm8960.c b/drivers/clk/qcom/mmcc-msm8960.c
-index 12f3c0b..ce48ad1 100644
--- a/drivers/clk/qcom/mmcc-msm8960.c
+++ b/drivers/clk/qcom/mmcc-msm8960.c
-@@ -726,9 +726,11 @@ static struct freq_tbl clk_tbl_gfx2d[] = {
+@@ -726,9 +726,11 @@ static struct freq_tbl clk_tbl_gfx2d[] =
};
static struct clk_dyn_rcg gfx2d0_src = {
.mn[0] = {
.mnctr_en_bit = 8,
.mnctr_reset_bit = 25,
-@@ -862,9 +866,11 @@ static struct freq_tbl clk_tbl_gfx3d[] = {
+@@ -862,9 +866,11 @@ static struct freq_tbl clk_tbl_gfx3d[] =
};
static struct clk_dyn_rcg gfx3d_src = {
.p[0] = {
.pre_div_shift = 22,
.pre_div_width = 4,
-@@ -1355,9 +1365,11 @@ static struct freq_tbl clk_tbl_vcodec[] = {
+@@ -1355,9 +1365,11 @@ static struct freq_tbl clk_tbl_vcodec[]
};
static struct clk_dyn_rcg vcodec_src = {
.mn[0] = {
.mnctr_en_bit = 5,
.mnctr_reset_bit = 31,
---
-1.7.10.4
-
include/dt-bindings/reset/qcom,gcc-ipq806x.h | 43 ++
3 files changed, 755 insertions(+), 1 deletion(-)
-diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
-index 278c5fe..f7916be 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -32,6 +32,33 @@
static const u8 gcc_pxo_pll8_map[] = {
[P_PXO] = 0,
-@@ -157,6 +219,22 @@ static const char *gcc_pxo_pll8_pll0_map[] = {
+@@ -157,6 +219,22 @@ static const char *gcc_pxo_pll8_pll0_map
"pll0",
};
static struct freq_tbl clk_tbl_gsbi_uart[] = {
{ 1843200, P_PLL8, 2, 6, 625 },
{ 3686400, P_PLL8, 2, 12, 625 },
-@@ -2132,12 +2210,567 @@ static struct clk_branch usb_fs1_h_clk = {
+@@ -2132,12 +2210,567 @@ static struct clk_branch usb_fs1_h_clk =
},
};
[GSBI1_UART_SRC] = &gsbi1_uart_src.clkr,
[GSBI1_UART_CLK] = &gsbi1_uart_clk.clkr,
[GSBI2_UART_SRC] = &gsbi2_uart_src.clkr,
-@@ -2232,6 +2865,19 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
+@@ -2232,6 +2865,19 @@ static struct clk_regmap *gcc_ipq806x_cl
[USB_FS1_XCVR_SRC] = &usb_fs1_xcvr_clk_src.clkr,
[USB_FS1_XCVR_CLK] = &usb_fs1_xcvr_clk.clkr,
[USB_FS1_SYSTEM_CLK] = &usb_fs1_sys_clk.clkr,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-@@ -2350,6 +2996,48 @@ static const struct qcom_reset_map gcc_ipq806x_resets[] = {
+@@ -2350,6 +2996,48 @@ static const struct qcom_reset_map gcc_i
[USB30_1_PHY_RESET] = { 0x3b58, 0 },
[NSSFB0_RESET] = { 0x3b60, 6 },
[NSSFB1_RESET] = { 0x3b60, 7 },
};
static const struct regmap_config gcc_ipq806x_regmap_config = {
-@@ -2378,6 +3066,8 @@ static int gcc_ipq806x_probe(struct platform_device *pdev)
+@@ -2378,6 +3066,8 @@ static int gcc_ipq806x_probe(struct plat
{
struct clk *clk;
struct device *dev = &pdev->dev;
/* Temporary until RPM clocks supported */
clk = clk_register_fixed_rate(dev, "cxo", NULL, CLK_IS_ROOT, 25000000);
-@@ -2388,7 +3078,25 @@ static int gcc_ipq806x_probe(struct platform_device *pdev)
+@@ -2388,7 +3078,25 @@ static int gcc_ipq806x_probe(struct plat
if (IS_ERR(clk))
return PTR_ERR(clk);
}
static int gcc_ipq806x_remove(struct platform_device *pdev)
-diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
-index 3b0f8e7..0fd3e8a 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -289,5 +289,8 @@
+#define NSS_CORE_CLK 282 /* Virtual */
#endif
-diff --git a/include/dt-bindings/reset/qcom,gcc-ipq806x.h b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
-index 0ad5ef9..de9c814 100644
--- a/include/dt-bindings/reset/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/reset/qcom,gcc-ipq806x.h
@@ -129,4 +129,47 @@
+#define NSS_SRDS_N_RESET 156
+
#endif
---
-1.7.10.4
-
create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
create mode 100644 arch/arm/boot/dts/qcom-ipq8064.dtsi
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index f2aeb95..f22c51d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -235,6 +235,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb
dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-new file mode 100644
-index 0000000..100b6eb
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -0,0 +1,25 @@
+ };
+ };
+};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
-new file mode 100644
-index 0000000..7093b07
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -0,0 +1 @@
+#include "qcom-ipq8064.dtsi"
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-new file mode 100644
-index 0000000..952afb7
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -0,0 +1,176 @@
+ };
+ };
+};
-diff --git a/arch/arm/mach-qcom/board.c b/arch/arm/mach-qcom/board.c
-index c437a99..6d8bbf7 100644
--- a/arch/arm/mach-qcom/board.c
+++ b/arch/arm/mach-qcom/board.c
-@@ -18,6 +18,8 @@ static const char * const qcom_dt_match[] __initconst = {
+@@ -18,6 +18,8 @@ static const char * const qcom_dt_match[
"qcom,apq8064",
"qcom,apq8074-dragonboard",
"qcom,apq8084",
"qcom,msm8660-surf",
"qcom,msm8960-cdp",
NULL
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index 42ebd72..1752a4d 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -133,6 +133,7 @@ CONFIG_QCOM_BAM_DMA=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
---
-1.7.10.4
-
arch/arm/boot/Makefile | 11 ++++++++++-
2 files changed, 11 insertions(+), 2 deletions(-)
-diff --git a/arch/arm/Makefile b/arch/arm/Makefile
-index 51e5bed..e9fc731 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
-@@ -297,7 +297,7 @@ archprepare:
+@@ -302,7 +302,7 @@ archprepare:
# Convert bzImage to zImage
bzImage: zImage
INSTALL_TARGETS = zinstall uinstall install
PHONY += bzImage $(BOOT_TARGETS) $(INSTALL_TARGETS)
-diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
-index ec2f806..3cbc83e 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -25,7 +25,7 @@ INITRD_PHYS := $(initrd_phys-y)
$(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
$(Q)$(MAKE) $(build)=$(obj)/bootp $@
@:
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 33 ++++----------------
2 files changed, 12 insertions(+), 27 deletions(-)
-diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-index b82a268..bee6ff2 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -23,6 +23,12 @@ Optional properties:
SPI slave nodes must be children of the SPI master node and can contain
properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index 65bf18e..dc128ac 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
-@@ -424,31 +424,6 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -424,31 +424,6 @@ static int spi_qup_io_config(struct spi_
return 0;
}
static int spi_qup_transfer_one(struct spi_master *master,
struct spi_device *spi,
struct spi_transfer *xfer)
-@@ -571,12 +546,16 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -571,12 +546,16 @@ static int spi_qup_probe(struct platform
return -ENOMEM;
}
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index dc128ac..a404298 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
-@@ -619,16 +619,19 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -619,16 +619,19 @@ static int spi_qup_probe(struct platform
if (ret)
goto error;
error:
clk_disable_unprepare(cclk);
clk_disable_unprepare(iclk);
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 36 ++++++++++++--------
2 files changed, 27 insertions(+), 15 deletions(-)
-diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-index bee6ff2..e2c88df 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-@@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz, up to four chip selects, programmable
+@@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz,
data path from 4 bits to 32 bits and numerous protocol variants.
Required properties:
- reg: Should contain base register location and length
- interrupts: Interrupt number used by this controller
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index a404298..c137226 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -142,6 +142,7 @@ struct spi_qup {
};
-@@ -420,7 +421,9 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -420,7 +421,9 @@ static int spi_qup_io_config(struct spi_
config |= QUP_CONFIG_SPI_MODE;
writel_relaxed(config, controller->base + QUP_CONFIG);
return 0;
}
-@@ -486,7 +489,7 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -486,7 +489,7 @@ static int spi_qup_probe(struct platform
struct resource *res;
struct device *dev;
void __iomem *base;
int ret, irq, size;
dev = &pdev->dev;
-@@ -529,15 +532,6 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -529,15 +532,6 @@ static int spi_qup_probe(struct platform
return ret;
}
master = spi_alloc_master(dev, sizeof(struct spi_qup));
if (!master) {
clk_disable_unprepare(cclk);
-@@ -570,6 +564,10 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -570,6 +564,10 @@ static int spi_qup_probe(struct platform
controller->cclk = cclk;
controller->irq = irq;
spin_lock_init(&controller->lock);
init_completion(&controller->done);
-@@ -593,8 +591,8 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -593,8 +591,8 @@ static int spi_qup_probe(struct platform
size = QUP_IO_M_INPUT_FIFO_SIZE(iomode);
controller->in_fifo_sz = controller->in_blk_sz * (2 << size);
controller->out_blk_sz, controller->out_fifo_sz);
writel_relaxed(1, base + QUP_SW_RESET);
-@@ -607,10 +605,19 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -607,10 +605,19 @@ static int spi_qup_probe(struct platform
writel_relaxed(0, base + QUP_OPERATIONAL);
writel_relaxed(0, base + QUP_IO_M_MODES);
writel_relaxed(0, base + SPI_CONFIG);
writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
-@@ -732,6 +739,7 @@ static int spi_qup_remove(struct platform_device *pdev)
+@@ -732,6 +739,7 @@ static int spi_qup_remove(struct platfor
}
static struct of_device_id spi_qup_dt_match[] = {
{ .compatible = "qcom,spi-qup-v2.1.1", },
{ .compatible = "qcom,spi-qup-v2.2.1", },
{ }
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 44 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index 100b6eb..dbb546d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -14,12 +14,29 @@
};
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index 952afb7..b39c1ef 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -137,6 +137,20 @@
};
qcom,ssbi@500000 {
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 47 ++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index dbb546d..158a09f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -20,6 +20,15 @@
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index b39c1ef..244f857 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -187,6 +187,53 @@
qcom,ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x00500000 0x1000>;
---
-1.7.10.4
-
3 files changed, 685 insertions(+)
create mode 100644 drivers/pci/host/pci-qcom.c
-diff --git a/arch/arm/mach-qcom/Kconfig b/arch/arm/mach-qcom/Kconfig
-index 63502cc..4d242e5 100644
--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -7,6 +7,8 @@ config ARCH_QCOM
select QCOM_SCM if SMP
help
Support for Qualcomm's devicetree based systems.
-diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
-index 13fb333..be80744 100644
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+obj-$(CONFIG_ARCH_QCOM) += pci-qcom.o
-diff --git a/drivers/pci/host/pci-qcom.c b/drivers/pci/host/pci-qcom.c
-new file mode 100644
-index 0000000..76d7b88
--- /dev/null
+++ b/drivers/pci/host/pci-qcom.c
@@ -0,0 +1,682 @@
+ dev->class = (dev->class & 0xff) | (PCI_CLASS_BRIDGE_PCI << 8);
+}
+DECLARE_PCI_FIXUP_EARLY(PCIE_VENDOR_ID_RCP, PCIE_DEVICE_ID_RCP, msm_pcie_fixup_early);
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 93 ++++++++++++++++++++++++++++++
2 files changed, 131 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index 158a09f..11f7a77 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -21,6 +21,22 @@
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index 244f857..42a651f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -2,6 +2,7 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 3 +++
1 file changed, 3 insertions(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index 1752a4d..4866dec 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -21,6 +21,8 @@ CONFIG_ARCH_QCOM=y
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
CONFIG_HW_RANDOM=y
---
-1.7.10.4
-
drivers/ata/ahci.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 51af275..6357e34 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -53,7 +53,7 @@
AHCI_MAX_SG = 168, /* hardware max is 64K */
AHCI_DMA_BOUNDARY = 0xffffffff,
AHCI_MAX_CMDS = 32,
---
-1.7.10.4
-
3 files changed, 97 insertions(+)
create mode 100644 drivers/ata/ahci_qcom.c
-diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
-index dc950f3..da05034 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,16 @@ config AHCI_IMX
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
-diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
-index 366b743..e08044f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-diff --git a/drivers/ata/ahci_qcom.c b/drivers/ata/ahci_qcom.c
-new file mode 100644
-index 0000000..bfb7a77
--- /dev/null
+++ b/drivers/ata/ahci_qcom.c
@@ -0,0 +1,86 @@
+MODULE_DESCRIPTION("Qualcomm AHCI SATA platform driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("ahci:qcom");
---
-1.7.10.4
-
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/qcom-sata.txt
-diff --git a/Documentation/devicetree/bindings/ata/qcom-sata.txt b/Documentation/devicetree/bindings/ata/qcom-sata.txt
-new file mode 100644
-index 0000000..5e74e41
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/qcom-sata.txt
@@ -0,0 +1,40 @@
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+ };
---
-1.7.10.4
-
3 files changed, 219 insertions(+)
create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c
-diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
-index c7a551c..3642a65 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -65,4 +65,11 @@ config BCM_KONA_USB2_PHY
+ select GENERIC_PHY
+
endmenu
-diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
-index b57c253..74f78cc 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += p
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
-diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c
-new file mode 100644
-index 0000000..e931aee
--- /dev/null
+++ b/drivers/phy/phy-qcom-ipq806x-sata.c
@@ -0,0 +1,211 @@
+
+MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
1 file changed, 23 insertions(+)
create mode 100644 Documentation/devicetree/bindings/phy/qcom-phy.txt
-diff --git a/Documentation/devicetree/bindings/phy/qcom-phy.txt b/Documentation/devicetree/bindings/phy/qcom-phy.txt
-new file mode 100644
-index 0000000..76bfbd0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom-phy.txt
@@ -0,0 +1,23 @@
+
+ #phy-cells = <0>;
+ };
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 30 ++++++++++++++++++++++++++++++
2 files changed, 38 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index 11f7a77..c752889 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -118,5 +118,13 @@
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index 42a651f..93c0315 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -339,5 +339,35 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index 4866dec..84c6639 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -57,7 +57,6 @@ CONFIG_MTD_BLOCK=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index 84c6639..85a35af 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -31,6 +31,7 @@ CONFIG_HIGHPTE=y
CONFIG_VFP=y
CONFIG_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
---
-1.7.10.4
-
drivers/pinctrl/pinctrl-msm.c | 8 ++++++++
1 file changed, 8 insertions(+)
-diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
-index 7d67d34..f054b25 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -207,6 +207,7 @@ static int msm_config_reg(struct msm_pinctrl *pctrl,
+@@ -207,6 +207,7 @@ static int msm_config_reg(struct msm_pin
case PIN_CONFIG_BIAS_DISABLE:
case PIN_CONFIG_BIAS_PULL_DOWN:
case PIN_CONFIG_BIAS_PULL_UP:
*bit = g->pull_bit;
*mask = 3;
break;
-@@ -243,6 +244,7 @@ static int msm_config_set(struct pinctrl_dev *pctldev, unsigned int pin,
+@@ -243,6 +244,7 @@ static int msm_config_set(struct pinctrl
#define MSM_NO_PULL 0
#define MSM_PULL_DOWN 1
#define MSM_PULL_UP 3
static unsigned msm_regval_to_drive(u32 val)
-@@ -280,6 +282,9 @@ static int msm_config_group_get(struct pinctrl_dev *pctldev,
+@@ -280,6 +282,9 @@ static int msm_config_group_get(struct p
case PIN_CONFIG_BIAS_PULL_DOWN:
arg = arg == MSM_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
arg = arg == MSM_PULL_UP;
break;
-@@ -339,6 +344,9 @@ static int msm_config_group_set(struct pinctrl_dev *pctldev,
+@@ -339,6 +344,9 @@ static int msm_config_group_set(struct p
case PIN_CONFIG_BIAS_PULL_DOWN:
arg = MSM_PULL_DOWN;
break;
case PIN_CONFIG_BIAS_PULL_UP:
arg = MSM_PULL_UP;
break;
---
-1.7.10.4
-
create mode 100644 drivers/mtd/nand/qcom_nand.c
create mode 100644 drivers/mtd/nand/qcom_nand.h
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index 90ff447..6e3842f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -510,4 +510,22 @@ config MTD_NAND_XWAY
+ Support for some NAND chips connected to the QCOM NAND controller.
+
endif # MTD_NAND
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 542b568..6ef3c02 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -49,5 +49,7 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+@@ -49,5 +49,7 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+obj-$(CONFIG_MTD_QCOM_DMA) += qcom_adm_dma.o
nand-objs := nand_base.o nand_bbt.o
-diff --git a/drivers/mtd/nand/qcom_adm_dma.c b/drivers/mtd/nand/qcom_adm_dma.c
-new file mode 100644
-index 0000000..46d8473
--- /dev/null
+++ b/drivers/mtd/nand/qcom_adm_dma.c
@@ -0,0 +1,797 @@
+ return 0;
+}
+arch_initcall(msm_init_datamover);
-diff --git a/drivers/mtd/nand/qcom_adm_dma.h b/drivers/mtd/nand/qcom_adm_dma.h
-new file mode 100644
-index 0000000..1014d57
--- /dev/null
+++ b/drivers/mtd/nand/qcom_adm_dma.h
@@ -0,0 +1,268 @@
+#define CMD_SRC_CRCI(n) (((n) & 15) << 3)
+
+#endif
-diff --git a/drivers/mtd/nand/qcom_nand.c b/drivers/mtd/nand/qcom_nand.c
-new file mode 100644
-index 0000000..9314132
--- /dev/null
+++ b/drivers/mtd/nand/qcom_nand.c
@@ -0,0 +1,7455 @@
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("msm_nand flash driver code");
-diff --git a/drivers/mtd/nand/qcom_nand.h b/drivers/mtd/nand/qcom_nand.h
-new file mode 100644
-index 0000000..468186c
--- /dev/null
+++ b/drivers/mtd/nand/qcom_nand.h
@@ -0,0 +1,196 @@
+extern struct flash_platform_data msm_nand_data;
+
+#endif
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 33 +++++++++++++++++++++++++++++
2 files changed, 67 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index c752889..4062eb6 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -45,6 +45,29 @@
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index 93c0315..d9fce15 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -76,6 +76,7 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index 85a35af..e3f9013 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -56,6 +56,7 @@ CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI_TGT=y
---
-1.7.10.4
-
create mode 100644 drivers/soc/qcom/qcom_tcsr.c
create mode 100644 include/dt-bindings/soc/qcom,tcsr.h
-diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr.txt
-new file mode 100644
-index 0000000..6ea74c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,tcsr.txt
@@ -0,0 +1,25 @@
+ };
+
+
-diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
-index 7bd2c94..3e4486a 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -9,3 +9,9 @@ config QCOM_GSBI
+ help
+ Say y here to enable TCSR support. The TCSR provides control
+ functions for various peripherals.
-diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
-index 4389012..d299492 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
-diff --git a/drivers/soc/qcom/qcom_tcsr.c b/drivers/soc/qcom/qcom_tcsr.c
-new file mode 100644
-index 0000000..dd33153
--- /dev/null
+++ b/drivers/soc/qcom/qcom_tcsr.c
@@ -0,0 +1,64 @@
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM TCSR driver");
+MODULE_LICENSE("GPL v2");
-diff --git a/include/dt-bindings/soc/qcom,tcsr.h b/include/dt-bindings/soc/qcom,tcsr.h
-new file mode 100644
-index 0000000..c9d497a
--- /dev/null
+++ b/include/dt-bindings/soc/qcom,tcsr.h
@@ -0,0 +1,19 @@
+#define TCSR_USB_SELECT_USB3_DUAL 0x3
+
+#endif
---
-1.7.10.4
-
drivers/clk/qcom/gcc-ipq806x.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
-index f7916be..d80dc69 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -1992,7 +1992,7 @@ static struct clk_branch usb30_1_branch_clk = {
+@@ -1992,7 +1992,7 @@ static struct clk_branch usb30_1_branch_
};
static const struct freq_tbl clk_tbl_usb30_utmi[] = {
{ }
};
---
-1.7.10.4
-
include/dt-bindings/clock/qcom,gcc-ipq806x.h | 38 +++++++++++++-------------
1 file changed, 19 insertions(+), 19 deletions(-)
-diff --git a/include/dt-bindings/clock/qcom,gcc-ipq806x.h b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
-index 0fd3e8a..163ba85 100644
--- a/include/dt-bindings/clock/qcom,gcc-ipq806x.h
+++ b/include/dt-bindings/clock/qcom,gcc-ipq806x.h
@@ -273,24 +273,24 @@
+#define NSS_CORE_CLK 283 /* Virtual */
#endif
---
-1.7.10.4
-
3 files changed, 165 insertions(+)
create mode 100644 drivers/usb/dwc3/dwc3-qcom.c
-diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
-index e2c730f..2d01983 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -59,6 +59,14 @@ config USB_DWC3_EXYNOS
config USB_DWC3_PCI
tristate "PCIe-based Platforms"
depends on PCI
-diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
-index 10ac3e7..4066e4e 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -31,5 +31,6 @@ endif
+obj-$(CONFIG_USB_DWC3_QCOM) += dwc3-qcom.o
obj-$(CONFIG_USB_DWC3_PCI) += dwc3-pci.o
obj-$(CONFIG_USB_DWC3_KEYSTONE) += dwc3-keystone.o
-diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
-new file mode 100644
-index 0000000..8d17360
--- /dev/null
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -0,0 +1,156 @@
+MODULE_ALIAS("platform:qcom-dwc3");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM Glue Layer");
---
-1.7.10.4
-
create mode 100644 drivers/usb/phy/phy-qcom-hsusb.c
create mode 100644 drivers/usb/phy/phy-qcom-ssusb.c
-diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig
-index 7d1451d..ddb65be 100644
--- a/drivers/usb/phy/Kconfig
+++ b/drivers/usb/phy/Kconfig
@@ -193,7 +193,7 @@ config USB_ISP1301
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
-diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile
-index be58ada..857f04e 100644
--- a/drivers/usb/phy/Makefile
+++ b/drivers/usb/phy/Makefile
-@@ -26,6 +26,8 @@ obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o
+@@ -26,6 +26,8 @@ obj-$(CONFIG_USB_EHCI_TEGRA) += phy-teg
obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o
obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o
obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o
obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o
obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o
obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o
-diff --git a/drivers/usb/phy/phy-qcom-hsusb.c b/drivers/usb/phy/phy-qcom-hsusb.c
-new file mode 100644
-index 0000000..f96b2b9
--- /dev/null
+++ b/drivers/usb/phy/phy-qcom-hsusb.c
@@ -0,0 +1,340 @@
+MODULE_ALIAS("platform:qcom-dwc3-hsphy");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM HSPHY driver");
-diff --git a/drivers/usb/phy/phy-qcom-ssusb.c b/drivers/usb/phy/phy-qcom-ssusb.c
-new file mode 100644
-index 0000000..3da778f
--- /dev/null
+++ b/drivers/usb/phy/phy-qcom-ssusb.c
@@ -0,0 +1,455 @@
+MODULE_ALIAS("platform:qcom-dwc3-ssphy");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM SSPHY driver");
---
-1.7.10.4
-
1 file changed, 104 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/qcom,dwc3.txt
-diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.txt b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
-new file mode 100644
-index 0000000..105b6b7
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.txt
@@ -0,0 +1,104 @@
+ dr_mode = "host";
+ };
+ };
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 90 ++++++++++++++++++++++++++++++
2 files changed, 119 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index 4062eb6..2b2d63c 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -160,5 +160,34 @@
+ };
};
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index d9fce15..6be6ac9 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -4,6 +4,7 @@
+ };
};
};
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index e3f9013..3d55d79 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -122,9 +122,14 @@ CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_COMMON_CLK_QCOM=y
CONFIG_IPQ_GCC_806X=y
CONFIG_MSM_GCC_8660=y
---
-1.7.10.4
-
arch/arm/mach-vt8500/Kconfig | 1 -
11 files changed, 29 deletions(-)
-diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
-index 4332e8d..1a61d4a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -180,13 +180,6 @@ config ARCH_HAS_ILOG2_U32
+@@ -181,13 +181,6 @@ config ARCH_HAS_ILOG2_U32
config ARCH_HAS_ILOG2_U64
bool
config ARCH_HAS_BANDGAP
bool
-@@ -315,7 +308,6 @@ config ARCH_MULTIPLATFORM
+@@ -316,7 +309,6 @@ config ARCH_MULTIPLATFORM
config ARCH_INTEGRATOR
bool "ARM Ltd. Integrator family"
select ARM_AMBA
select ARM_PATCH_PHYS_VIRT
select AUTO_ZRELADDR
-@@ -540,7 +532,6 @@ config ARCH_DOVE
+@@ -541,7 +533,6 @@ config ARCH_DOVE
config ARCH_KIRKWOOD
bool "Marvell Kirkwood"
select ARCH_REQUIRE_GPIOLIB
select CPU_FEROCEON
select GENERIC_CLOCKEVENTS
-@@ -641,7 +632,6 @@ config ARCH_LPC32XX
+@@ -642,7 +633,6 @@ config ARCH_LPC32XX
config ARCH_PXA
bool "PXA2xx/PXA3xx-based"
depends on MMU
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
-@@ -710,7 +700,6 @@ config ARCH_RPC
+@@ -711,7 +701,6 @@ config ARCH_RPC
config ARCH_SA1100
bool "SA1100-based"
select ARCH_MTD_XIP
select ARCH_REQUIRE_GPIOLIB
select ARCH_SPARSEMEM_ENABLE
-@@ -728,7 +717,6 @@ config ARCH_SA1100
+@@ -729,7 +718,6 @@ config ARCH_SA1100
config ARCH_S3C24XX
bool "Samsung S3C24XX SoCs"
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_SAMSUNG_PWM
-@@ -748,7 +736,6 @@ config ARCH_S3C24XX
+@@ -749,7 +737,6 @@ config ARCH_S3C24XX
config ARCH_S3C64XX
bool "Samsung S3C64XX"
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_VIC
-@@ -809,7 +796,6 @@ config ARCH_S5PC100
+@@ -810,7 +797,6 @@ config ARCH_S5PC100
config ARCH_S5PV210
bool "Samsung S5PV210/S5PC110"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_SPARSEMEM_ENABLE
select CLKDEV_LOOKUP
-@@ -863,7 +849,6 @@ config ARCH_DAVINCI
+@@ -864,7 +850,6 @@ config ARCH_DAVINCI
config ARCH_OMAP1
bool "TI OMAP1"
depends on MMU
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
-@@ -2170,9 +2155,7 @@ endmenu
+@@ -2171,9 +2156,7 @@ endmenu
menu "CPU Power Management"
source "drivers/cpuidle/Kconfig"
-diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
-index a075b3e..34cfecc 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -39,7 +39,6 @@ config ARCH_DAVINCI_DA830
select CP_INTC
config ARCH_DAVINCI_DA8XX
-diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
-index 0aded64..9f74755 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -1,7 +1,6 @@
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_HAS_OPP
select ARCH_SUPPORTS_BIG_ENDIAN
-diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
-index 33567aa..e7ae0ee 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -103,7 +103,6 @@ config SOC_IMX25
select ARCH_HAS_OPP
select ARCH_MXC_IOMUX_V3
select CPU_V7
-diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
-index 0af7ca0..0674cb7 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -93,7 +93,6 @@ config SOC_DRA7XX
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_OMAP
select ARCH_REQUIRE_GPIOLIB
-diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
-index 05fa505..61d4d31 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -85,7 +85,6 @@ config ARCH_R8A73A4
select ARCH_HAS_OPP
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
-diff --git a/arch/arm/mach-spear/Kconfig b/arch/arm/mach-spear/Kconfig
-index ac1710e6..811ba13 100644
--- a/arch/arm/mach-spear/Kconfig
+++ b/arch/arm/mach-spear/Kconfig
@@ -16,7 +16,6 @@ if PLAT_SPEAR
select ARM_GIC
select CPU_V7
select GPIO_SPEAR_SPICS
-diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
-index b1232d8..52bfc9e 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -1,6 +1,5 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
select ARM_GIC
-diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
-index 0034d2c..cb1176e 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -3,7 +3,6 @@ config ARCH_U8500
select ARCH_REQUIRE_GPIOLIB
select ARM_AMBA
select ARM_ERRATA_754322
-diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
-index 4a70be4..ca5b7e5 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -67,7 +67,6 @@ config ARCH_VEXPRESS_DCSCB
select ARCH_HAS_OPP
select PM_OPP
help
-diff --git a/arch/arm/mach-vt8500/Kconfig b/arch/arm/mach-vt8500/Kconfig
-index 927be93..788d0b4 100644
--- a/arch/arm/mach-vt8500/Kconfig
+++ b/arch/arm/mach-vt8500/Kconfig
@@ -1,6 +1,5 @@
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select CLKSRC_OF
---
-1.7.10.4
-
kernel/power/Kconfig | 3 ---
8 files changed, 13 deletions(-)
-diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
-index b8a907d..7b6a021 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
-@@ -52,9 +52,6 @@ Typical usage of the OPP library is as follows:
+@@ -52,9 +52,6 @@ Typical usage of the OPP library is as f
SoC framework -> modifies on required cases certain OPPs -> OPP layer
-> queries to search/retrieve information ->
OPP layer expects each domain to be represented by a unique device pointer. SoC
framework registers a set of initial OPPs per device with the OPP layer. This
list is expected to be an optimally small number typically around 5 per device.
-diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
-index 4c414af..67e69a8 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -107,7 +107,6 @@ config SOC_EXYNOS5440
select HAVE_ARM_ARCH_TIMER
select AUTO_ZRELADDR
select MIGHT_HAVE_PCI
-diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
-index 9f74755..43bd782 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -2,7 +2,6 @@ config ARCH_HIGHBANK
select ARCH_SUPPORTS_BIG_ENDIAN
select ARCH_WANT_OPTIONAL_GPIOLIB
select ARM_AMBA
-diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
-index 0674cb7..3e6596c 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -13,7 +13,6 @@ config ARCH_OMAP3
select ARM_CPU_SUSPEND if PM
select CPU_V7
select MULTI_IRQ_HANDLER
-diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
-index 61d4d31..9fc2dd2 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -85,7 +85,6 @@ config ARCH_R8A73A4
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SND_SOC_AK4642 if SND_SIMPLE_CARD
-diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
-index ca5b7e5..4ed6e97 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -67,7 +67,6 @@ config ARCH_VEXPRESS_DCSCB
select PM_OPP
help
The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
-diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
-index 7d2f435..d416754 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -68,7 +68,6 @@ comment "DEVFREQ Drivers"
select DEVFREQ_GOV_SIMPLE_ONDEMAND
help
This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int)
-diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
-index 2fac9cc..caa040c 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -253,9 +253,6 @@ config APM_EMULATION
config PM_OPP
bool "Operating Performance Point (OPP) Layer library"
depends on ARCH_HAS_OPP
---
-1.7.10.4
-
drivers/clk/clkdev.c | 2 ++
2 files changed, 3 insertions(+), 1 deletion(-)
-diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
-index 0582068..a3facad 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -2502,7 +2502,7 @@ EXPORT_SYMBOL_GPL(of_clk_del_provider);
/* Check if we have such a provider in our array */
list_for_each_entry(provider, &of_clk_providers, link) {
-diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c
-index 48f6721..a360b2e 100644
--- a/drivers/clk/clkdev.c
+++ b/drivers/clk/clkdev.c
-@@ -167,6 +167,8 @@ struct clk *clk_get(struct device *dev, const char *con_id)
+@@ -167,6 +167,8 @@ struct clk *clk_get(struct device *dev,
clk = of_clk_get_by_name(dev->of_node, con_id);
if (!IS_ERR(clk))
return clk;
}
return clk_get_sys(dev_id, con_id);
---
-1.7.10.4
-
create mode 100644 arch/arm/common/krait-l2-accessors.c
create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
-diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
-index c3a4e9c..9da52dc 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -9,6 +9,9 @@ config DMABOUNCE
config SHARP_LOCOMO
bool
-diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
-index 4bdc4162..2836f99 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -7,6 +7,7 @@ obj-y += firmware.o
obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
-diff --git a/arch/arm/common/krait-l2-accessors.c b/arch/arm/common/krait-l2-accessors.c
-new file mode 100644
-index 0000000..5d514bb
--- /dev/null
+++ b/arch/arm/common/krait-l2-accessors.c
@@ -0,0 +1,58 @@
+ return val;
+}
+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
-diff --git a/arch/arm/include/asm/krait-l2-accessors.h b/arch/arm/include/asm/krait-l2-accessors.h
-new file mode 100644
-index 0000000..48fe552
--- /dev/null
+++ b/arch/arm/include/asm/krait-l2-accessors.h
@@ -0,0 +1,20 @@
+extern u32 krait_get_l2_indirect_reg(u32 addr);
+
+#endif
---
-1.7.10.4
-
create mode 100644 drivers/clk/qcom/clk-generic.c
create mode 100644 include/linux/clk/msm-clk-generic.h
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index df2a1b3..2cc6039 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -6,6 +6,7 @@ clk-qcom-y += clk-pll.o
clk-qcom-y += reset.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
-diff --git a/drivers/clk/qcom/clk-generic.c b/drivers/clk/qcom/clk-generic.c
-new file mode 100644
-index 0000000..a0d778b
--- /dev/null
+++ b/drivers/clk/qcom/clk-generic.c
@@ -0,0 +1,405 @@
+ .recalc_rate = mux_div_clk_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_ops_mux_div_clk);
-diff --git a/include/linux/clk/msm-clk-generic.h b/include/linux/clk/msm-clk-generic.h
-new file mode 100644
-index 0000000..cee3863
--- /dev/null
+++ b/include/linux/clk/msm-clk-generic.h
@@ -0,0 +1,208 @@
+extern const struct clk_ops clk_ops_mux_div_clk;
+
+#endif
---
-1.7.10.4
-
create mode 100644 drivers/clk/qcom/clk-hfpll.c
create mode 100644 drivers/clk/qcom/clk-hfpll.h
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index 2cc6039..93fd03f 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -7,6 +7,7 @@ clk-qcom-y += clk-rcg.o
clk-qcom-y += reset.o
obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
-diff --git a/drivers/clk/qcom/clk-hfpll.c b/drivers/clk/qcom/clk-hfpll.c
-new file mode 100644
-index 0000000..f8a40a7
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.c
@@ -0,0 +1,260 @@
+ .init = clk_hfpll_init,
+};
+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
-diff --git a/drivers/clk/qcom/clk-hfpll.h b/drivers/clk/qcom/clk-hfpll.h
-new file mode 100644
-index 0000000..48c18d6
--- /dev/null
+++ b/drivers/clk/qcom/clk-hfpll.h
@@ -0,0 +1,54 @@
+extern const struct clk_ops clk_ops_hfpll;
+
+#endif
---
-1.7.10.4
-
3 files changed, 119 insertions(+)
create mode 100644 drivers/clk/qcom/hfpll.c
-diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
-index cfaa54c..de8ba31 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -53,3 +53,11 @@ config MSM_MMCC_8974
+ Support for the high-frequency PLLs present on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index 93fd03f..d0d8e3d 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
-@@ -16,3 +16,4 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
+@@ -16,3 +16,4 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm896
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
-diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
-new file mode 100644
-index 0000000..701a377
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,110 @@
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");
---
-1.7.10.4
-
drivers/clk/qcom/gcc-msm8960.c | 82 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
-diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c
-index f4ffd91..d04fc99 100644
--- a/drivers/clk/qcom/gcc-msm8960.c
+++ b/drivers/clk/qcom/gcc-msm8960.c
@@ -30,6 +30,7 @@
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
-@@ -2763,6 +2842,9 @@ static struct clk_regmap *gcc_msm8960_clks[] = {
+@@ -2763,6 +2842,9 @@ static struct clk_regmap *gcc_msm8960_cl
[PMIC_ARB1_H_CLK] = &pmic_arb1_h_clk.clkr,
[PMIC_SSBI2_CLK] = &pmic_ssbi2_clk.clkr,
[RPM_MSG_RAM_H_CLK] = &rpm_msg_ram_h_clk.clkr,
};
static const struct qcom_reset_map gcc_msm8960_resets[] = {
---
-1.7.10.4
-
create mode 100644 drivers/clk/qcom/clk-krait.c
create mode 100644 drivers/clk/qcom/clk-krait.h
-diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
-index de8ba31..70b6a7c 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -61,3 +61,7 @@ config QCOM_HFPLL
+config KRAIT_CLOCKS
+ bool
+ select KRAIT_L2_ACCESSORS
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index d0d8e3d..6482165 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -7,6 +7,7 @@ clk-qcom-y += clk-rcg.o
clk-qcom-y += clk-hfpll.o
clk-qcom-y += reset.o
-diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c
-new file mode 100644
-index 0000000..4283426
--- /dev/null
+++ b/drivers/clk/qcom/clk-krait.c
@@ -0,0 +1,121 @@
+ .get_div = kpss_div2_get_div,
+};
+EXPORT_SYMBOL_GPL(clk_div_ops_kpss_div2);
-diff --git a/drivers/clk/qcom/clk-krait.h b/drivers/clk/qcom/clk-krait.h
-new file mode 100644
-index 0000000..9c3eb38
--- /dev/null
+++ b/drivers/clk/qcom/clk-krait.h
@@ -0,0 +1,22 @@
+extern const struct clk_div_ops clk_div_ops_kpss_div2;
+
+#endif
---
-1.7.10.4
-
3 files changed, 124 insertions(+)
create mode 100644 drivers/clk/qcom/kpss-xcc.c
-diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
-index 70b6a7c..e9e5360 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -62,6 +62,14 @@ config QCOM_HFPLL
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index 6482165..29b2a45 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
-@@ -17,4 +17,5 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
+@@ -17,4 +17,5 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm896
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
-diff --git a/drivers/clk/qcom/kpss-xcc.c b/drivers/clk/qcom/kpss-xcc.c
-new file mode 100644
-index 0000000..1061668
--- /dev/null
+++ b/drivers/clk/qcom/kpss-xcc.c
@@ -0,0 +1,115 @@
+module_platform_driver(kpss_xcc_driver);
+
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
3 files changed, 373 insertions(+)
create mode 100644 drivers/clk/qcom/krait-cc.c
-diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
-index e9e5360..7418108 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -70,6 +70,14 @@ config KPSS_XCC
config KRAIT_CLOCKS
bool
select KRAIT_L2_ACCESSORS
-diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
-index 29b2a45..1b88abe 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
-@@ -19,3 +19,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
+@@ -19,3 +19,4 @@ obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+obj-$(CONFIG_KRAITCC) += krait-cc.o
-diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
-new file mode 100644
-index 0000000..90985ea
--- /dev/null
+++ b/drivers/clk/qcom/krait-cc.c
@@ -0,0 +1,364 @@
+
+MODULE_DESCRIPTION("Krait CPU Clock Driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
3 files changed, 204 insertions(+)
create mode 100644 drivers/cpufreq/cpufreq-krait.c
-diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
-index 4b029c0..4051528 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -194,6 +194,19 @@ config GENERIC_CPUFREQ_CPU0
menu "x86 CPU frequency scaling drivers"
depends on X86
source "drivers/cpufreq/Kconfig.x86"
-diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
-index 7494565..f6f4485 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
+@@ -12,6 +12,7 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE)
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
obj-$(CONFIG_GENERIC_CPUFREQ_CPU0) += cpufreq-cpu0.o
##################################################################################
# x86 drivers.
-diff --git a/drivers/cpufreq/cpufreq-krait.c b/drivers/cpufreq/cpufreq-krait.c
-new file mode 100644
-index 0000000..7b38b9c
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-krait.c
@@ -0,0 +1,190 @@
+
+MODULE_DESCRIPTION("Krait CPUfreq driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
3 files changed, 57 insertions(+)
create mode 100644 drivers/cpufreq/qcom-cpufreq.c
-diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
-index 3129749..6ae884d 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -123,6 +123,14 @@ config ARM_OMAP2PLUS_CPUFREQ
config ARM_S3C_CPUFREQ
bool
help
-diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
-index f6f4485..f5d18a3 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
-@@ -60,6 +60,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
+@@ -60,6 +60,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6
obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
obj-$(CONFIG_PXA25x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA27x) += pxa2xx-cpufreq.o
obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
-diff --git a/drivers/cpufreq/qcom-cpufreq.c b/drivers/cpufreq/qcom-cpufreq.c
-new file mode 100644
-index 0000000..71f4387
--- /dev/null
+++ b/drivers/cpufreq/qcom-cpufreq.c
@@ -0,0 +1,48 @@
+
+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
drivers/clk/qcom/gcc-ipq806x.c | 83 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 83 insertions(+)
-diff --git a/drivers/clk/qcom/gcc-ipq806x.c b/drivers/clk/qcom/gcc-ipq806x.c
-index d80dc69..83a73cb 100644
--- a/drivers/clk/qcom/gcc-ipq806x.c
+++ b/drivers/clk/qcom/gcc-ipq806x.c
@@ -30,6 +30,7 @@
static struct clk_pll pll14 = {
.l_reg = 0x31c4,
.m_reg = 0x31c8,
-@@ -2878,6 +2958,9 @@ static struct clk_regmap *gcc_ipq806x_clks[] = {
+@@ -2878,6 +2958,9 @@ static struct clk_regmap *gcc_ipq806x_cl
[NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
[NSSTCM_CLK] = &nss_tcm_clk.clkr,
[NSS_CORE_CLK] = &nss_core_clk,
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 45 +++++++++++++++++++++++++++++++++++
1 file changed, 45 insertions(+)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index 6be6ac9..97e4c3d 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -23,6 +23,22 @@
};
saw0: regulator@2089000 {
---
-1.7.10.4
-
arch/arm/configs/qcom_defconfig | 10 ++++++++++
1 file changed, 10 insertions(+)
-diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
-index 3d55d79..3bc72eb 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -31,6 +31,13 @@ CONFIG_HIGHPTE=y
CONFIG_MSM_IOMMU=y
CONFIG_PHY_QCOM_IPQ806X_SATA=y
CONFIG_EXT2_FS=y
---
-1.7.10.4
-
3 files changed, 882 insertions(+)
create mode 100644 drivers/dma/qcom_adm.c
-diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
-index f87cef9..79155fa 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -410,4 +410,14 @@ config QCOM_BAM_DMA
+ peripheral devices.
+
endif
-diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
-index 5150c82..4a4f521 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -46,3 +46,4 @@ obj-$(CONFIG_K3_DMA) += k3dma.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
-diff --git a/drivers/dma/qcom_adm.c b/drivers/dma/qcom_adm.c
-new file mode 100644
-index 0000000..035f606
--- /dev/null
+++ b/drivers/dma/qcom_adm.c
@@ -0,0 +1,871 @@
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
+MODULE_LICENSE("GPL v2");
---
-1.7.10.4
-
1 file changed, 60 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/qcom_adm.txt
-diff --git a/Documentation/devicetree/bindings/dma/qcom_adm.txt b/Documentation/devicetree/bindings/dma/qcom_adm.txt
-new file mode 100644
-index 0000000..7f05cb5
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
@@ -0,0 +1,60 @@
+ <&adm_dma 5 10>;
+ dma-names = "rx", "tx";
+ };
---
-1.7.10.4
-
drivers/spi/spi-qup.c | 361 ++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 340 insertions(+), 21 deletions(-)
-diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c
-index c137226..28754ae 100644
--- a/drivers/spi/spi-qup.c
+++ b/drivers/spi/spi-qup.c
@@ -22,6 +22,8 @@
};
-@@ -266,6 +278,221 @@ static void spi_qup_fifo_write(struct spi_qup *controller,
+@@ -266,6 +278,221 @@ static void spi_qup_fifo_write(struct sp
}
}
static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
{
struct spi_qup *controller = dev_id;
-@@ -315,11 +542,13 @@ static irqreturn_t spi_qup_qup_irq(int irq, void *dev_id)
+@@ -315,11 +542,13 @@ static irqreturn_t spi_qup_qup_irq(int i
error = -EIO;
}
spin_lock_irqsave(&controller->lock, flags);
controller->error = error;
-@@ -339,6 +568,8 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -339,6 +568,8 @@ static int spi_qup_io_config(struct spi_
struct spi_qup *controller = spi_master_get_devdata(spi->master);
u32 config, iomode, mode;
int ret, n_words, w_size;
if (spi->mode & SPI_LOOP && xfer->len > controller->in_fifo_sz) {
dev_err(controller->dev, "too big size for loopback %d > %d\n",
-@@ -367,6 +598,13 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -367,6 +598,13 @@ static int spi_qup_io_config(struct spi_
n_words = xfer->len / w_size;
controller->w_size = w_size;
if (n_words <= (controller->in_fifo_sz / sizeof(u32))) {
mode = QUP_IO_M_MODE_FIFO;
writel_relaxed(n_words, controller->base + QUP_MX_READ_CNT);
-@@ -374,19 +612,30 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -374,19 +612,30 @@ static int spi_qup_io_config(struct spi_
/* must be zero for FIFO */
writel_relaxed(0, controller->base + QUP_MX_INPUT_CNT);
writel_relaxed(0, controller->base + QUP_MX_OUTPUT_CNT);
iomode |= (mode << QUP_IO_M_OUTPUT_MODE_MASK_SHIFT);
iomode |= (mode << QUP_IO_M_INPUT_MODE_MASK_SHIFT);
-@@ -419,11 +668,20 @@ static int spi_qup_io_config(struct spi_device *spi, struct spi_transfer *xfer)
+@@ -419,11 +668,20 @@ static int spi_qup_io_config(struct spi_
config &= ~(QUP_CONFIG_NO_INPUT | QUP_CONFIG_NO_OUTPUT | QUP_CONFIG_N);
config |= xfer->bits_per_word - 1;
config |= QUP_CONFIG_SPI_MODE;
return 0;
}
-@@ -452,26 +710,32 @@ static int spi_qup_transfer_one(struct spi_master *master,
+@@ -452,26 +710,32 @@ static int spi_qup_transfer_one(struct s
controller->tx_bytes = 0;
spin_unlock_irqrestore(&controller->lock, flags);
spi_qup_set_state(controller, QUP_STATE_RESET);
spin_lock_irqsave(&controller->lock, flags);
controller->xfer = NULL;
-@@ -553,6 +817,7 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -553,6 +817,7 @@ static int spi_qup_probe(struct platform
master->transfer_one = spi_qup_transfer_one;
master->dev.of_node = pdev->dev.of_node;
master->auto_runtime_pm = true;
platform_set_drvdata(pdev, master);
-@@ -612,6 +877,55 @@ static int spi_qup_probe(struct platform_device *pdev)
+@@ -612,6 +877,55 @@ static int spi_qup_probe(struct platform
writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN,
base + SPI_ERROR_FLAGS_EN);
/* if earlier version of the QUP, disable INPUT_OVERRUN */
if (controller->qup_v1)
writel_relaxed(QUP_ERROR_OUTPUT_OVER_RUN |
-@@ -730,6 +1044,11 @@ static int spi_qup_remove(struct platform_device *pdev)
+@@ -730,6 +1044,11 @@ static int spi_qup_remove(struct platfor
if (ret)
return ret;
clk_disable_unprepare(controller->cclk);
clk_disable_unprepare(controller->iclk);
---
-1.7.10.4
-
arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 +++++---
2 files changed, 16 insertions(+), 3 deletions(-)
-diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-index 2b2d63c..c54a3ee 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -44,6 +44,10 @@
sata-phy@1b400000 {
status = "ok";
};
-diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-index 97e4c3d..f74e923 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -421,19 +421,21 @@
};
nand@0x1ac00000 {
---
-1.7.10.4
-
drivers/mtd/nand/qcom_adm_dma.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
-diff --git a/drivers/mtd/nand/qcom_adm_dma.c b/drivers/mtd/nand/qcom_adm_dma.c
-index 46d8473..542f901 100644
--- a/drivers/mtd/nand/qcom_adm_dma.c
+++ b/drivers/mtd/nand/qcom_adm_dma.c
-@@ -568,14 +568,14 @@ static int msm_dmov_init_clocks(struct platform_device *pdev)
+@@ -568,14 +568,14 @@ static int msm_dmov_init_clocks(struct p
int adm = (pdev->id >= 0) ? pdev->id : 0;
int ret;
if (IS_ERR(dmov_conf[adm].pclk)) {
dmov_conf[adm].pclk = NULL;
/* pclk not present on all SoCs, don't bail on failure */
-@@ -690,7 +690,7 @@ static int msm_dmov_probe(struct platform_device *pdev)
+@@ -690,7 +690,7 @@ static int msm_dmov_probe(struct platfor
}
/* get resets */
if (IS_ERR(dmov_conf[adm].adm_reset)) {
dev_err(&pdev->dev, "failed to get adm reset\n");
ret = PTR_ERR(dmov_conf[adm].adm_reset);
---
-1.7.10.4
-
drivers/mtd/nand/Kconfig | 6 +++---
2 files changed, 4 insertions(+), 4 deletions(-)
-diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
-index 79155fa..ed7a5f6 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -412,7 +412,7 @@ config QCOM_BAM_DMA
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
---help---
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index 6e3842f..4a84264 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -511,15 +511,15 @@ config MTD_NAND_XWAY
select CRC16
select BITREVERSE
select MTD_NAND_IDS
---
-1.7.10.4
-
CPU_TYPE:=xscale
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
CPU_SUBTYPE:=vfpv3
MAINTAINER:=Luka Perkov <luka@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
CPU_TYPE:=arm926ej-s
MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
KERNELNAME:="zImage dtbs"
define Target/Description
CPU_CFLAGS_octeon:=-march=octeon -mabi=64
MAINTAINER:=John Crispin <blogic@openwrt.org>
-LINUX_VERSION:=3.10.49
-LINUX_VERSION:=3.14.14
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
-Index: linux-3.14.14/drivers/staging/octeon/ethernet.c
-===================================================================
---- linux-3.14.14.orig/drivers/staging/octeon/ethernet.c 2014-08-07 17:03:44.000000000 +0200
-+++ linux-3.14.14/drivers/staging/octeon/ethernet.c 2014-08-07 17:07:31.768932379 +0200
-@@ -624,6 +624,7 @@
+--- a/drivers/staging/octeon/ethernet.c
++++ b/drivers/staging/octeon/ethernet.c
+@@ -624,6 +624,7 @@ static int cvm_oct_probe(struct platform
int interface;
int fau = FAU_NUM_PACKET_BUFFERS_TO_FREE;
int qos;
struct device_node *pip;
octeon_mdiobus_force_mod_depencency();
-@@ -707,13 +708,19 @@
+@@ -707,13 +708,19 @@ static int cvm_oct_probe(struct platform
}
num_interfaces = cvmx_helper_get_number_of_interfaces();
-Index: linux-3.10.49/arch/mips/cavium-octeon/octeon-platform.c
-===================================================================
---- linux-3.10.49.orig/arch/mips/cavium-octeon/octeon-platform.c 2014-07-26 20:39:48.109010152 +0100
-+++ linux-3.10.49/arch/mips/cavium-octeon/octeon-platform.c 2014-07-26 20:41:10.005008627 +0100
-@@ -82,7 +82,7 @@
+--- a/arch/mips/cavium-octeon/octeon-platform.c
++++ b/arch/mips/cavium-octeon/octeon-platform.c
+@@ -82,7 +82,7 @@ static int __init octeon_ehci_device_ini
};
/* Only Octeon2 has ehci/ohci */
return 0;
if (octeon_is_simulation() || usb_disabled())
-@@ -131,7 +131,7 @@
+@@ -131,7 +131,7 @@ static int __init octeon_ohci_device_ini
};
/* Only Octeon2 has ehci/ohci */
FEATURES:=squashfs gpio
MAINTAINER:=John Crispin <blogic@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
DEFAULT_PACKAGES += \
arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index a3ad56c..5846817 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -20,6 +20,22 @@
/* does the board have sdram or ddram */
static int dram_type;
-@@ -339,6 +355,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -339,6 +355,8 @@ void prom_soc_init(struct ralink_soc_inf
u32 n1;
u32 rev;
u32 cfg0;
n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0);
n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1);
-@@ -386,4 +404,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -386,4 +404,12 @@ void prom_soc_init(struct ralink_soc_inf
BUG();
}
soc_info->mem_base = MT7620_DRAM_BASE;
+ pr_info("Digital PMU set to %s control\n",
+ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
}
---
-1.7.10.4
-
arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++
1 file changed, 5 insertions(+)
-diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
-index 6f9b24f..7ff9290 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -105,4 +105,9 @@
+}
+
#endif
---
-1.7.10.4
-
arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-index 5a508f9..bd93014 100644
--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h
+++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h
-@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg)
+@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned r
return __raw_readl(rt_sysc_membase + reg);
}
static inline void rt_memc_w32(u32 val, unsigned reg)
{
__raw_writel(val, rt_memc_membase + reg);
---
-1.7.10.4
-
2 files changed, 50 insertions(+)
create mode 100644 arch/mips/ralink/bootrom.c
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 98ae349..584a8d9 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -17,4 +17,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o
+obj-$(CONFIG_DEBUG_FS) += bootrom.o
+
obj-y += dts/
-diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c
-new file mode 100644
-index 0000000..f926f6f
--- /dev/null
+++ b/arch/mips/ralink/bootrom.c
@@ -0,0 +1,48 @@
+}
+
+postcore_initcall(bootrom_setup);
---
-1.7.10.4
-
2 files changed, 89 insertions(+)
create mode 100644 arch/mips/ralink/ill_acc.c
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index 584a8d9..fc57c16 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
-@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o timer.o
+@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o
obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o
obj-$(CONFIG_SOC_RT288X) += rt288x.o
obj-$(CONFIG_SOC_RT305X) += rt305x.o
obj-$(CONFIG_SOC_RT3883) += rt3883.o
-diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c
-new file mode 100644
-index 0000000..4a3f696
--- /dev/null
+++ b/arch/mips/ralink/ill_acc.c
@@ -0,0 +1,87 @@
+}
+
+arch_initcall(ill_acc_of_setup);
---
-1.7.10.4
-
arch/mips/ralink/clk.c | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c
-index 5d0983d..feb5a9b 100644
--- a/arch/mips/ralink/clk.c
+++ b/arch/mips/ralink/clk.c
-@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *clk)
+@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *c
}
EXPORT_SYMBOL_GPL(clk_get_rate);
void __init plat_time_init(void)
{
struct clk *clk;
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 19 ++++++++++++-------
2 files changed, 14 insertions(+), 12 deletions(-)
-diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
-index 7ff9290..27b2fa9 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -25,11 +25,8 @@
#define SYSCFG0_XTAL_FREQ_SEL BIT(6)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 5846817..4fdee17 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
-@@ -357,22 +357,27 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -357,22 +357,27 @@ void prom_soc_init(struct ralink_soc_inf
u32 cfg0;
u32 pmu0;
u32 pmu1;
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
"Ralink %s ver:%u eco:%u",
name,
---
-1.7.10.4
-
arch/mips/ralink/of.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index eccc552..1b81e8f 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -78,6 +78,17 @@ void __init device_tree_init(void)
add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M,
BOOT_MEM_RAM);
else
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index 4fdee17..c883973 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -336,6 +336,7 @@ void __init ralink_clk_init(void)
}
void __init ralink_of_remap(void)
---
-1.7.10.4
-
arch/mips/ralink/rt3883.c | 1 +
1 file changed, 1 insertion(+)
-diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
-index b474ac2..58b5b9f 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -204,6 +204,7 @@ void __init ralink_clk_init(void)
}
void __init ralink_of_remap(void)
---
-1.7.10.4
-
arch/mips/ralink/rt288x.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
-diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
-index f87de1a..90e8934 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -76,7 +76,7 @@ struct ralink_pinmux rt_gpio_pinmux = {
}
void __init ralink_of_remap(void)
---
-1.7.10.4
-
create mode 100644 arch/mips/ralink/malta-amon.c
create mode 100644 arch/mips/ralink/mt7621.c
-diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h
-index b2e3e93..29fba50 100644
--- a/arch/mips/include/asm/gic.h
+++ b/arch/mips/include/asm/gic.h
@@ -19,7 +19,11 @@
#define MSK(n) ((1 << (n)) - 1)
#define REG32(addr) (*(volatile unsigned int *) (addr))
-diff --git a/arch/mips/include/asm/mach-ralink/irq.h b/arch/mips/include/asm/mach-ralink/irq.h
-new file mode 100644
-index 0000000..4321865
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/irq.h
@@ -0,0 +1,9 @@
+#include_next <irq.h>
+
+#endif
-diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h
-new file mode 100644
-index 0000000..21c8dc2
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/mt7621.h
@@ -0,0 +1,39 @@
+#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8)
+
+#endif
-diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
-index 3b46f7c..fa925b7 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -51,6 +51,7 @@ SECTIONS
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 1bfd1c1..6a04360 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -7,6 +7,11 @@ config CLKEVT_RT3352
endchoice
endif
-diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile
-index fc57c16..ad18cdf 100644
--- a/arch/mips/ralink/Makefile
+++ b/arch/mips/ralink/Makefile
@@ -6,16 +6,21 @@
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform
-index 6d9c8c4..6095fcc 100644
--- a/arch/mips/ralink/Platform
+++ b/arch/mips/ralink/Platform
-@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt
+@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctr
#
load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000
cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620
+#
+load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000
+cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621
-diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c
-new file mode 100644
-index 0000000..0122d42
--- /dev/null
+++ b/arch/mips/ralink/irq-gic.c
@@ -0,0 +1,271 @@
+{
+ of_irq_init(of_irq_ids);
+}
-diff --git a/arch/mips/ralink/malta-amon.c b/arch/mips/ralink/malta-amon.c
-new file mode 100644
-index 0000000..1e47844
--- /dev/null
+++ b/arch/mips/ralink/malta-amon.c
@@ -0,0 +1,81 @@
+ smp_rmb(); /* Target will be updating flags soon */
+ pr_debug("launch: cpu%d gone!\n", cpu);
+}
-diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c
-new file mode 100644
-index 0000000..2aac87c
--- /dev/null
+++ b/arch/mips/ralink/mt7621.c
@@ -0,0 +1,183 @@
+ if (register_cmp_smp_ops())
+ panic("failed to register_vsmp_smp_ops()");
+}
---
-1.7.10.4
-
1 file changed, 197 insertions(+)
create mode 100644 arch/mips/configs/mt7621_defconfig
-diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig
-new file mode 100644
-index 0000000..7719471
--- /dev/null
+++ b/arch/mips/configs/mt7621_defconfig
@@ -0,0 +1,197 @@
+CONFIG_CRC32_SARWATE=y
+# CONFIG_XZ_DEC_X86 is not set
+CONFIG_AVERAGE=y
---
-1.7.10.4
-
create mode 100644 arch/mips/ralink/dts/mt7621.dtsi
create mode 100644 arch/mips/ralink/dts/mt7621_eval.dts
-diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
-index 18194fa..9742c73 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
-@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o
+@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_
obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
+obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
-diff --git a/arch/mips/ralink/dts/mt7621.dtsi b/arch/mips/ralink/dts/mt7621.dtsi
-new file mode 100644
-index 0000000..6db2c57
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7621.dtsi
@@ -0,0 +1,257 @@
+ reg = <0x1e110000 8000>;
+ };
+};
-diff --git a/arch/mips/ralink/dts/mt7621_eval.dts b/arch/mips/ralink/dts/mt7621_eval.dts
-new file mode 100644
-index 0000000..834f59c
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7621_eval.dts
@@ -0,0 +1,16 @@
+ bootargs = "console=ttyS0,57600";
+ };
+};
---
-1.7.10.4
-
arch/mips/ralink/early_printk.c | 45 ++++++++++++++++++++++++++-------------
1 file changed, 30 insertions(+), 15 deletions(-)
-diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c
-index b46d041..255d695 100644
--- a/arch/mips/ralink/early_printk.c
+++ b/arch/mips/ralink/early_printk.c
@@ -12,21 +12,24 @@
+ ;
+ }
}
---
-1.7.10.4
-
2 files changed, 798 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7621.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 137f2a6..d054bc8 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o
+@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1
obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
-diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c
-new file mode 100644
-index 0000000..0b58fce
--- /dev/null
+++ b/arch/mips/pci/pci-mt7621.c
@@ -0,0 +1,797 @@
+{
+ return 0;
+}
---
-1.7.10.4
-
arch/mips/kernel/cevt-r4k.c | 37 +++++++++++++++++++++++++++++++------
1 file changed, 31 insertions(+), 6 deletions(-)
-diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c
-index 50d3f5a..99585e6 100644
--- a/arch/mips/kernel/cevt-r4k.c
+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long delta,
+@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long
#endif /* CONFIG_MIPS_MT_SMTC */
DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
int cp0_timer_irq_installed;
-@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction = {
+@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction =
.name = "timer",
};
return 0;
}
---
-1.7.10.4
-
arch/mips/ralink/of.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 1b81e8f..885cf50 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -75,7 +75,7 @@ void __init device_tree_init(void)
}
static int memory_dtb;
---
-1.7.10.4
-
arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 197 insertions(+), 16 deletions(-)
-diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c
-index e38692a..a71a7cb 100644
--- a/arch/mips/ralink/timer.c
+++ b/arch/mips/ralink/timer.c
@@ -12,6 +12,8 @@
};
static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val)
-@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg)
+@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt
static irqreturn_t rt_timer_irq(int irq, void *_rt)
{
struct rt_timer *rt = (struct rt_timer *) _rt;
if (err) {
dev_err(rt->dev, "failed to request irq\n");
} else {
-@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_timer *rt, unsigned long divisor)
+@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_tim
else
rt->timer_div = divisor;
return 0;
}
-@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_timer *rt)
+@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_t
rt_timer_w32(rt, TIMER_REG_TMR0CTL, t);
}
rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL);
if (!rt) {
-@@ -140,12 +303,29 @@ static int rt_timer_probe(struct platform_device *pdev)
+@@ -140,12 +303,29 @@ static int rt_timer_probe(struct platfor
if (!rt->timer_freq)
return -EINVAL;
dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq);
-@@ -156,6 +336,7 @@ static int rt_timer_remove(struct platform_device *pdev)
+@@ -156,6 +336,7 @@ static int rt_timer_remove(struct platfo
{
struct rt_timer *rt = platform_get_drvdata(pdev);
rt_timer_disable(rt);
rt_timer_free(rt);
-@@ -180,6 +361,6 @@ static struct platform_driver rt_timer_driver = {
+@@ -180,6 +361,6 @@ static struct platform_driver rt_timer_d
module_platform_driver(rt_timer_driver);
+MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm");
MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
MODULE_LICENSE("GPL");
---
-1.7.10.4
-
arch/mips/ralink/dts/rt3883.dtsi | 219 +++++++++++++++++++++++++++++++++++++
3 files changed, 510 insertions(+)
-diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi
-index 08bf24f..df6cb79 100644
--- a/arch/mips/ralink/dts/mt7620a.dtsi
+++ b/arch/mips/ralink/dts/mt7620a.dtsi
@@ -29,10 +29,32 @@
+ #reset-cells = <1>;
};
};
-diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi
-index e3203d4..49622d7 100644
--- a/arch/mips/ralink/dts/rt3050.dtsi
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -9,6 +9,10 @@
status = "disabled";
};
};
-diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi
-index 3b131dd..4d092b1 100644
--- a/arch/mips/ralink/dts/rt3883.dtsi
+++ b/arch/mips/ralink/dts/rt3883.dtsi
@@ -29,10 +29,32 @@
+ };
+ };
};
---
-1.7.10.4
-
arch/mips/ralink/cevt-rt3352.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
-diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c
-index 24bf057..4174b40 100644
--- a/arch/mips/ralink/cevt-rt3352.c
+++ b/arch/mips/ralink/cevt-rt3352.c
@@ -29,6 +29,10 @@
static void systick_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt);
-@@ -87,6 +93,21 @@ static struct irqaction systick_irqaction = {
+@@ -87,6 +93,21 @@ static struct irqaction systick_irqactio
.dev_id = &systick.dev,
};
static void systick_set_clock_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
-@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum clock_event_mode mode,
+@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum
sdev->irq_requested = 1;
iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN,
systick.membase + SYSTICK_CONFIG);
if (sdev->irq_requested)
free_irq(systick.dev.irq, &systick_irqaction);
sdev->irq_requested = 0;
-@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum clock_event_mode mode,
+@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum
}
}
systick_irqaction.name = np->name;
systick.dev.name = np->name;
clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60);
---
-1.7.10.4
-
arch/mips/ralink/of.c | 2 ++
1 file changed, 2 insertions(+)
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 885cf50..405b79c 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -99,6 +99,8 @@ void __init plat_mem_setup(void)
of_scan_flat_dt(early_init_dt_find_memory, NULL);
if (memory_dtb)
of_scan_flat_dt(early_init_dt_scan_memory, NULL);
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index c883973..d68b8ff 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -36,6 +36,12 @@
}
void __init ralink_of_remap(void)
---
-1.7.10.4
-
create mode 100644 arch/mips/ralink/dts/mt7628an.dtsi
create mode 100644 arch/mips/ralink/dts/mt7628an_eval.dts
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 6a04360..9174dbc 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -75,6 +75,10 @@ choice
config DTB_MT7621_EVAL
bool "MT7621 eval kit"
depends on SOC_MT7621
-diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile
-index 9742c73..9f4e1c7 100644
--- a/arch/mips/ralink/dts/Makefile
+++ b/arch/mips/ralink/dts/Makefile
-@@ -3,3 +3,4 @@ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o
+@@ -3,3 +3,4 @@ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_
obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o
obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o
obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o
+obj-$(CONFIG_DTB_MT7628AN_EVAL) := mt7628an_eval.dtb.o
-diff --git a/arch/mips/ralink/dts/mt7628an.dtsi b/arch/mips/ralink/dts/mt7628an.dtsi
-new file mode 100644
-index 0000000..fd17d0a
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7628an.dtsi
@@ -0,0 +1,184 @@
+ };
+
+};
-diff --git a/arch/mips/ralink/dts/mt7628an_eval.dts b/arch/mips/ralink/dts/mt7628an_eval.dts
-new file mode 100644
-index 0000000..132c29e
--- /dev/null
+++ b/arch/mips/ralink/dts/mt7628an_eval.dts
@@ -0,0 +1,54 @@
+ };
+ };
+};
---
-1.7.10.4
-
arch/mips/ralink/irq.c | 33 +++++++++++++++++++++++----------
1 file changed, 23 insertions(+), 10 deletions(-)
-diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c
-index 781b3d1..82c3146 100644
--- a/arch/mips/ralink/irq.c
+++ b/arch/mips/ralink/irq.c
@@ -20,14 +20,6 @@
}
static void ralink_intc_irq_unmask(struct irq_data *d)
-@@ -134,6 +144,9 @@ static int __init intc_of_init(struct device_node *node,
+@@ -134,6 +144,9 @@ static int __init intc_of_init(struct de
struct irq_domain *domain;
int irq;
irq = irq_of_parse_and_map(node, 0);
if (!irq)
panic("Failed to get INTC IRQ");
---
-1.7.10.4
-
arch/mips/ralink/mt7620.c | 266 +++++++++++++++++++++++-----
3 files changed, 232 insertions(+), 47 deletions(-)
-diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
-index 27b2fa9..c8590df 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -13,6 +13,13 @@
#define MT7620_DRAM_BASE 0x0
#define MT7620_SDRAM_SIZE_MIN 2
#define MT7620_SDRAM_SIZE_MAX 64
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index 9174dbc..f93835f 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -35,7 +35,7 @@ choice
select USB_ARCH_HAS_OHCI
select USB_ARCH_HAS_EHCI
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index d68b8ff..e590ccf 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -42,6 +42,8 @@
void prom_soc_init(struct ralink_soc_info *soc_info)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE);
-@@ -384,18 +563,25 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -384,18 +563,25 @@ void prom_soc_init(struct ralink_soc_inf
rev = __raw_readl(sysc + SYSC_REG_CHIP_REV);
bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK;
}
snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
-@@ -407,28 +593,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -407,28 +593,11 @@ void prom_soc_init(struct ralink_soc_inf
cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0);
dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK;
pmu0 = __raw_readl(sysc + PMU0_CFG);
pmu1 = __raw_readl(sysc + PMU1_CFG);
-@@ -437,4 +606,9 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -437,4 +606,9 @@ void prom_soc_init(struct ralink_soc_inf
(pmu0 & PMU_SW_SET) ? ("sw") : ("hw"));
pr_info("Digital PMU set to %s control\n",
(pmu1 & DIG_SW_SEL) ? ("sw") : ("hw"));
+ else
+ rt2880_pinmux_data = mt7620a_pinmux_data;
}
---
-1.7.10.4
-
drivers/tty/serial/8250/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
-index 2332991..7fb6873 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
-@@ -297,7 +297,7 @@ config SERIAL_8250_EM
+@@ -301,7 +301,7 @@ config SERIAL_8250_EM
config SERIAL_8250_RT288X
bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
help
If you have a Ralink RT288x/RT305x SoC based board and want to use the
serial port, say Y to this option. The driver can handle up to 2 serial
---
-1.7.10.4
-
drivers/tty/serial/8250/8250_core.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
-index 69932b7..606cbc6 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -2517,7 +2517,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
+@@ -2517,7 +2517,7 @@ serial8250_pm(struct uart_port *port, un
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
if (is_omap1_8250(pt))
return 0x16 << pt->port.regshift;
---
-1.7.10.4
-
drivers/tty/serial/of_serial.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
-diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
-index 9924660..42853b4 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
-@@ -102,7 +102,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
+@@ -102,7 +102,10 @@ static int of_platform_serial_setup(stru
port->fifosize = prop;
port->irq = irq_of_parse_and_map(np, 0);
if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
switch (prop) {
case 1:
---
-1.7.10.4
-
create mode 100644 arch/mips/include/asm/mach-ralink/pinmux.h
create mode 100644 drivers/pinctrl/pinctrl-rt2880.c
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index 95fa1f1..4ac98ca 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -435,6 +435,8 @@ config RALINK
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
-diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h
-index c8590df..1976fb8 100644
--- a/arch/mips/include/asm/mach-ralink/mt7620.h
+++ b/arch/mips/include/asm/mach-ralink/mt7620.h
@@ -90,7 +90,6 @@ enum mt762x_soc_type {
static inline int mt7620_get_eco(void)
{
-diff --git a/arch/mips/include/asm/mach-ralink/pinmux.h b/arch/mips/include/asm/mach-ralink/pinmux.h
-new file mode 100644
-index 0000000..324fa40
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/pinmux.h
@@ -0,0 +1,53 @@
+extern struct rt2880_pmx_group *rt2880_pinmux_data;
+
+#endif
-diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h
-index 069bf37..96f731b 100644
--- a/arch/mips/include/asm/mach-ralink/rt305x.h
+++ b/arch/mips/include/asm/mach-ralink/rt305x.h
@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void)
#define RT3352_SYSC_REG_SYSCFG0 0x010
#define RT3352_SYSC_REG_SYSCFG1 0x014
-diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h
-index 058382f..0fbe6f9 100644
--- a/arch/mips/include/asm/mach-ralink/rt3883.h
+++ b/arch/mips/include/asm/mach-ralink/rt3883.h
@@ -112,8 +112,6 @@
#define RT3883_GPIO_MODE_PCI_SHIFT 11
#define RT3883_GPIO_MODE_PCI_MASK 0x7
#define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT)
-diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h
-index 42dfd61..8e7d8e6 100644
--- a/arch/mips/ralink/common.h
+++ b/arch/mips/ralink/common.h
@@ -11,25 +11,6 @@
struct ralink_soc_info {
unsigned char sys_type[RAMIPS_SYS_TYPE_LEN];
unsigned char *compatible;
-diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c
-index e590ccf..818a7db 100644
--- a/arch/mips/ralink/mt7620.c
+++ b/arch/mips/ralink/mt7620.c
@@ -17,6 +17,7 @@
};
static struct rt2880_pmx_func pwm1_grp_mt7628[] = {
-diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c
-index 90e8934..2bfc660 100644
--- a/arch/mips/ralink/rt288x.c
+++ b/arch/mips/ralink/rt288x.c
@@ -17,46 +17,27 @@
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, wmac_rate = 40000000;
-@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_inf
soc_info->mem_base = RT2880_SDRAM_BASE;
soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
+
+ rt2880_pinmux_data = rt2880_pinmux_data_act;
}
-diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
-index bb82a82..356d6a0 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -17,90 +17,76 @@
+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
+ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
+ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM),
++ { 0 }
++};
++
++static struct rt2880_pmx_group rt3352_pinmux_data[] = {
++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
++ RT305X_GPIO_MODE_UART0_SHIFT),
++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
++ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
++ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
++ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
++ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
+ { 0 }
};
- .name = "gpio",
- .mask = RT305X_GPIO_MODE_GPIO,
- }, {0}
-+static struct rt2880_pmx_group rt3352_pinmux_data[] = {
-+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
-+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
-+ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK,
-+ RT305X_GPIO_MODE_UART0_SHIFT),
-+ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1),
-+ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG),
-+ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO),
-+ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII),
-+ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA),
-+ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA),
-+ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED),
-+ { 0 }
-+};
-+
+static struct rt2880_pmx_group rt5350_pinmux_data[] = {
+ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI),
static unsigned long rt5350_get_mem_size(void)
{
void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE);
-@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_inf
soc_info->mem_base = RT305X_SDRAM_BASE;
if (soc_is_rt5350()) {
soc_info->mem_size = rt5350_get_mem_size();
+ rt2880_pinmux_data = rt3352_pinmux_data;
}
}
-diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c
-index 58b5b9f..86a535c 100644
--- a/arch/mips/ralink/rt3883.c
+++ b/arch/mips/ralink/rt3883.c
@@ -17,132 +17,50 @@
+ FUNC("pci-host1", 2, 40, 32),
+ FUNC("pci-fnc", 3, 40, 32)
};
--
++static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
++static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
+
-static struct ralink_pinmux_grp pci_mux[] = {
- {
- .name = "pci-dev",
- .gpio_first = RT3883_GPIO_PCI_AD0,
- .gpio_last = RT3883_GPIO_PCI_AD31,
- }, {0}
-+static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) };
-+static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) };
-+
+static struct rt2880_pmx_group rt3883_pinmux_data[] = {
+ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C),
+ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI),
void __init ralink_clk_init(void)
{
unsigned long cpu_rate, sys_rate;
-@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info)
+@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_inf
soc_info->mem_base = RT3883_SDRAM_BASE;
soc_info->mem_size_min = RT3883_MEM_SIZE_MIN;
soc_info->mem_size_max = RT3883_MEM_SIZE_MAX;
+
+ rt2880_pinmux_data = rt3883_pinmux_data;
}
-diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
-index 1e4e693..1ff1491 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -198,6 +198,11 @@ config PINCTRL_LANTIQ
config PINCTRL_FALCON
bool
depends on SOC_FALCON
-diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
-index 4b83588..3160836 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o
+@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-
obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o
obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o
obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o
obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o
obj-$(CONFIG_PINCTRL_SIRF) += sirf/
obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o
-diff --git a/drivers/pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/pinctrl-rt2880.c
-new file mode 100644
-index 0000000..378ed52
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-rt2880.c
@@ -0,0 +1,467 @@
+}
+
+core_initcall_sync(rt2880_pinmux_init);
---
-1.7.10.4
-
3 files changed, 283 insertions(+)
create mode 100644 arch/mips/pci/pci-rt2880.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index d054bc8..6a0f453 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o
-diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c
-new file mode 100644
-index 0000000..e2c4730
--- /dev/null
+++ b/arch/mips/pci/pci-rt2880.c
@@ -0,0 +1,281 @@
+}
+
+arch_initcall(pcibios_init);
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index f93835f..eb2b2cd 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -21,6 +21,7 @@ choice
config SOC_RT305X
bool "RT305x"
---
-1.7.10.4
-
3 files changed, 365 insertions(+)
create mode 100644 arch/mips/pci/pci-mt7620a.c
-diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
-index 6a0f453..b140299 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o
+@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops
obj-$(CONFIG_LANTIQ) += fixup-lantiq.o
obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o
obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o
obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o
obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o
obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o
-diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c
-new file mode 100644
-index 0000000..271763c
--- /dev/null
+++ b/arch/mips/pci/pci-mt7620a.c
@@ -0,0 +1,363 @@
+}
+
+arch_initcall(mt7620a_pci_init);
-diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig
-index eb2b2cd..ce84aad 100644
--- a/arch/mips/ralink/Kconfig
+++ b/arch/mips/ralink/Kconfig
@@ -39,6 +39,7 @@ choice
config SOC_MT7621
bool "MT7621"
---
-1.7.10.4
-
include/linux/phy.h | 1 +
2 files changed, 7 insertions(+), 3 deletions(-)
-diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
-index 76d96b9..371f0b6 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
-@@ -715,7 +715,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -764,7 +764,8 @@ void phy_state_machine(struct work_struc
/* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
phydev->adjust_link(phydev->attached_dev);
break;
}
-@@ -781,7 +782,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -830,7 +831,8 @@ void phy_state_machine(struct work_struc
netif_carrier_on(phydev->attached_dev);
} else {
phydev->state = PHY_NOLINK;
}
phydev->adjust_link(phydev->attached_dev);
-@@ -793,7 +795,8 @@ void phy_state_machine(struct work_struct *work)
+@@ -842,7 +844,8 @@ void phy_state_machine(struct work_struc
case PHY_HALTED:
if (phydev->link) {
phydev->link = 0;
phydev->adjust_link(phydev->attached_dev);
do_suspend = 1;
}
-diff --git a/include/linux/phy.h b/include/linux/phy.h
-index 565188c..91b93f7 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -308,6 +308,7 @@ struct phy_device {
enum phy_state state;
---
-1.7.10.4
-
include/linux/of_net.h | 1 +
2 files changed, 38 insertions(+)
-diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c
-index a208a45..de93111 100644
--- a/drivers/of/of_net.c
+++ b/drivers/of/of_net.c
@@ -10,6 +10,7 @@
/**
* It maps 'enum phy_interface_t' found in include/linux/phy.h
-@@ -94,3 +95,39 @@ const void *of_get_mac_address(struct device_node *np)
+@@ -94,3 +95,39 @@ const void *of_get_mac_address(struct de
return NULL;
}
EXPORT_SYMBOL(of_get_mac_address);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_get_mac_address_mtd);
-diff --git a/include/linux/of_net.h b/include/linux/of_net.h
-index 34597c8..cdfbc60 100644
--- a/include/linux/of_net.h
+++ b/include/linux/of_net.h
@@ -11,6 +11,7 @@
#else
static inline int of_get_phy_mode(struct device_node *np)
{
---
-1.7.10.4
-
create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c
create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c
-diff --git a/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
-new file mode 100644
-index 0000000..2098c5c
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h
@@ -0,0 +1,27 @@
+};
+
+#endif /* _RT305X_ESW_PLATFORM_H */
-diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c
-index 356d6a0..ef99d78 100644
--- a/arch/mips/ralink/rt305x.c
+++ b/arch/mips/ralink/rt305x.c
@@ -199,6 +199,7 @@ void __init ralink_clk_init(void)
ralink_clk_add("10000b00.spi", sys_rate);
ralink_clk_add("10000100.timer", wdt_rate);
ralink_clk_add("10000120.watchdog", wdt_rate);
-diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
-index 506b024..ef6a274 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -134,6 +134,7 @@ config ETHOC
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
-diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
-index c0b8789..7c3eb7b 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-diff --git a/drivers/net/ethernet/ralink/Kconfig b/drivers/net/ethernet/ralink/Kconfig
-new file mode 100644
-index 0000000..727ed78
--- /dev/null
+++ b/drivers/net/ethernet/ralink/Kconfig
@@ -0,0 +1,32 @@
+ select PHYLIB
+ select SWCONFIG
+endif
-diff --git a/drivers/net/ethernet/ralink/Makefile b/drivers/net/ethernet/ralink/Makefile
-new file mode 100644
-index 0000000..de64edf
--- /dev/null
+++ b/drivers/net/ethernet/ralink/Makefile
@@ -0,0 +1,18 @@
+ralink-eth-$(CONFIG_SOC_MT7620) += soc_mt7620.o
+
+obj-$(CONFIG_NET_RALINK) += ralink-eth.o
-diff --git a/drivers/net/ethernet/ralink/esw_rt3052.c b/drivers/net/ethernet/ralink/esw_rt3052.c
-new file mode 100644
-index 0000000..b937062
--- /dev/null
+++ b/drivers/net/ethernet/ralink/esw_rt3052.c
@@ -0,0 +1,1463 @@
+{
+ platform_driver_unregister(&esw_driver);
+}
-diff --git a/drivers/net/ethernet/ralink/esw_rt3052.h b/drivers/net/ethernet/ralink/esw_rt3052.h
-new file mode 100644
-index 0000000..2ced3dff
--- /dev/null
+++ b/drivers/net/ethernet/ralink/esw_rt3052.h
@@ -0,0 +1,32 @@
+
+#endif
+#endif
-diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.c b/drivers/net/ethernet/ralink/gsw_mt7620a.c
-new file mode 100644
-index 0000000..70f81e3
--- /dev/null
+++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c
@@ -0,0 +1,566 @@
+
+ return 0;
+}
-diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.h b/drivers/net/ethernet/ralink/gsw_mt7620a.h
-new file mode 100644
-index 0000000..c87761a
--- /dev/null
+++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h
@@ -0,0 +1,30 @@
+extern int mt7620a_has_carrier(struct fe_priv *priv);
+
+#endif
-diff --git a/drivers/net/ethernet/ralink/mdio.c b/drivers/net/ethernet/ralink/mdio.c
-new file mode 100644
-index 0000000..32bf98b
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio.c
@@ -0,0 +1,244 @@
+ of_node_put(priv->mii_bus->dev.of_node);
+ kfree(priv->mii_bus);
+}
-diff --git a/drivers/net/ethernet/ralink/mdio.h b/drivers/net/ethernet/ralink/mdio.h
-new file mode 100644
-index 0000000..c3910a0
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio.h
@@ -0,0 +1,29 @@
+static inline void fe_mdio_cleanup(struct fe_priv *priv) {}
+#endif
+#endif
-diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c
-new file mode 100644
-index 0000000..b99eb46
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio_rt2880.c
@@ -0,0 +1,232 @@
+
+ return;
+}
-diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h
-new file mode 100644
-index 0000000..51e3633
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mdio_rt2880.h
@@ -0,0 +1,26 @@
+void rt2880_port_init(struct fe_priv *priv, struct device_node *np);
+
+#endif
-diff --git a/drivers/net/ethernet/ralink/mt7530.c b/drivers/net/ethernet/ralink/mt7530.c
-new file mode 100644
-index 0000000..06b67ee
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mt7530.c
@@ -0,0 +1,579 @@
+
+ return 0;
+}
-diff --git a/drivers/net/ethernet/ralink/mt7530.h b/drivers/net/ethernet/ralink/mt7530.h
-new file mode 100644
-index 0000000..169b888
--- /dev/null
+++ b/drivers/net/ethernet/ralink/mt7530.h
@@ -0,0 +1,20 @@
+int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus);
+
+#endif
-diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.c b/drivers/net/ethernet/ralink/ralink_soc_eth.c
-new file mode 100644
-index 0000000..f3abab7
--- /dev/null
+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c
@@ -0,0 +1,844 @@
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Ethernet driver for Ralink SoC");
-diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.h b/drivers/net/ethernet/ralink/ralink_soc_eth.h
-new file mode 100644
-index 0000000..ca16788
--- /dev/null
+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h
@@ -0,0 +1,384 @@
+u32 fe_r32(unsigned reg);
+
+#endif /* FE_ETH_H */
-diff --git a/drivers/net/ethernet/ralink/soc_mt7620.c b/drivers/net/ethernet/ralink/soc_mt7620.c
-new file mode 100644
-index 0000000..79b7b85
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_mt7620.c
@@ -0,0 +1,172 @@
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c
-new file mode 100644
-index 0000000..e0c418b
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt2880.c
@@ -0,0 +1,52 @@
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-diff --git a/drivers/net/ethernet/ralink/soc_rt305x.c b/drivers/net/ethernet/ralink/soc_rt305x.c
-new file mode 100644
-index 0000000..482ca1f
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt305x.c
@@ -0,0 +1,113 @@
+};
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
-diff --git a/drivers/net/ethernet/ralink/soc_rt3883.c b/drivers/net/ethernet/ralink/soc_rt3883.c
-new file mode 100644
-index 0000000..c660529c
--- /dev/null
+++ b/drivers/net/ethernet/ralink/soc_rt3883.c
@@ -0,0 +1,60 @@
+
+MODULE_DEVICE_TABLE(of, of_fe_match);
+
---
-1.7.10.4
-
create mode 100644 drivers/net/ethernet/raeth/raether_pdma.c
create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/board-custom.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/board-custom.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/board-custom.h
@@ -0,0 +1,153 @@
+/* Copyright Statement:
+ *
+
+#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */
+
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/eureka_ep430.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/eureka_ep430.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/eureka_ep430.h
@@ -0,0 +1,204 @@
+/**************************************************************************
+ *
+#endif
+
+#endif
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/generic.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/generic.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/generic.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
+
+
+#endif /* __ASM_SURFBOARD_GENERIC_H */
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/lm.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/lm.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/lm.h
@@ -0,0 +1,32 @@
+#include <linux/version.h>
+
+# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev)
+# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d)
+#endif
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/prom.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/prom.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/prom.h
@@ -0,0 +1,50 @@
+/*
+ * Carsten Langgaard, carstenl@mips.com
+};
+
+#endif /* !(_MIPS_PROM_H) */
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/rt_mmap.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/rt_mmap.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/rt_mmap.h
@@ -0,0 +1,796 @@
+/**************************************************************************
+ *
+
+#endif
+#endif
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/serial_rt2880.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/serial_rt2880.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/serial_rt2880.h
@@ -0,0 +1,443 @@
+/**************************************************************************
+ *
+#define UART_OMAP_SYSS 0x16 /* System status register */
+
+
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/sizes.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/sizes.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/sizes.h
@@ -0,0 +1,52 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+#endif
+
+/* END */
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/surfboard.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/surfboard.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/surfboard.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
+#define GIC_CPU_INT5 5 /* Core Interrupt 5 */
+
+#endif /* !(_SURFBOARD_H) */
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/surfboardint.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/surfboardint.h 2014-08-24 15:51:48.530654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/surfboardint.h
@@ -0,0 +1,190 @@
+/*
+ * Copyright (C) 2001 Palmchip Corporation. All rights reserved.
+
+
+#endif /* !(_SURFBOARDINT_H) */
-Index: linux-3.14.16/arch/mips/include/asm/rt2880/war.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/arch/mips/include/asm/rt2880/war.h 2014-08-24 15:51:48.534654066 +0200
+--- /dev/null
++++ b/arch/mips/include/asm/rt2880/war.h
@@ -0,0 +1,25 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+#define MIPS34K_MISSED_ITLB_WAR 0
+
+#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
-Index: linux-3.14.16/drivers/net/ethernet/Kconfig
-===================================================================
---- linux-3.14.16.orig/drivers/net/ethernet/Kconfig 2014-08-24 15:51:48.510654065 +0200
-+++ linux-3.14.16/drivers/net/ethernet/Kconfig 2014-08-24 15:51:48.534654066 +0200
-@@ -135,6 +135,7 @@
+--- a/drivers/net/ethernet/Kconfig
++++ b/drivers/net/ethernet/Kconfig
+@@ -135,6 +135,7 @@ source "drivers/net/ethernet/packetengin
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/ralink/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/renesas/Kconfig"
source "drivers/net/ethernet/rdc/Kconfig"
-Index: linux-3.14.16/drivers/net/ethernet/Makefile
-===================================================================
---- linux-3.14.16.orig/drivers/net/ethernet/Makefile 2014-08-24 15:51:48.510654065 +0200
-+++ linux-3.14.16/drivers/net/ethernet/Makefile 2014-08-24 15:51:48.534654066 +0200
-@@ -57,6 +57,7 @@
+--- a/drivers/net/ethernet/Makefile
++++ b/drivers/net/ethernet/Makefile
+@@ -57,6 +57,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_RALINK) += ralink/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_SH_ETH) += renesas/
obj-$(CONFIG_NET_VENDOR_RDC) += rdc/
-Index: linux-3.14.16/drivers/net/ethernet/raeth/Kconfig
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/Kconfig 2014-08-24 15:51:48.534654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/Kconfig
@@ -0,0 +1,344 @@
+
+config RA_NAT_NONE
+config 100PHY
+bool
+default y if GE1_MII_AN || GE2_MII_AN
-Index: linux-3.14.16/drivers/net/ethernet/raeth/Makefile
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/Makefile 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/Makefile
@@ -0,0 +1,7 @@
+obj-$(CONFIG_RAETH) += raeth.o
+raeth-objs := ra_mac.o mii_mgr.o
+#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING
+
+raeth-objs += raether.o
-Index: linux-3.14.16/drivers/net/ethernet/raeth/ethtool_readme.txt
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/ethtool_readme.txt 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ethtool_readme.txt
@@ -0,0 +1,44 @@
+
+Ethtool readme for selecting different PHY address.
+# ethtool eth2
+
+
-Index: linux-3.14.16/drivers/net/ethernet/raeth/mii_mgr.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/mii_mgr.c 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/mii_mgr.c
@@ -0,0 +1,166 @@
+#include <linux/module.h>
+#include <linux/version.h>
+
+EXPORT_SYMBOL(mii_mgr_write);
+EXPORT_SYMBOL(mii_mgr_read);
-Index: linux-3.14.16/drivers/net/ethernet/raeth/ra2882ethreg.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/ra2882ethreg.h 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra2882ethreg.h
@@ -0,0 +1,1268 @@
+#ifndef RA2882ETHREG_H
+#define RA2882ETHREG_H
+#define RAETH_TX_DONE_INT0 TX_DONE_INT0
+#define RAETH_DLY_INT_CFG DLY_INT_CFG
+#endif
-Index: linux-3.14.16/drivers/net/ethernet/raeth/ra_ioctl.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/ra_ioctl.h 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra_ioctl.h
@@ -0,0 +1,92 @@
+#ifndef _RAETH_IOCTL_H
+#define _RAETH_IOCTL_H
+
+
+#endif
-Index: linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.c 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra_mac.c
@@ -0,0 +1,98 @@
+#include <linux/module.h>
+#include <linux/version.h>
+}
+
+
-Index: linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/ra_mac.h 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/ra_mac.h
@@ -0,0 +1,35 @@
+#ifndef RA_MAC_H
+#define RA_MAC_H
+int getnext(const char *src, int separator, char *dest);
+int str_to_ip(unsigned int *ip, const char *str);
+#endif
-Index: linux-3.14.16/drivers/net/ethernet/raeth/raether.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/raether.c 2014-08-24 16:00:48.998667292 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether.c
@@ -0,0 +1,692 @@
+#include <linux/module.h>
+#include <linux/version.h>
+module_init(ra2882eth_init);
+module_exit(ra2882eth_cleanup_module);
+MODULE_LICENSE("GPL");
-Index: linux-3.14.16/drivers/net/ethernet/raeth/raether.h
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/raether.h 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether.h
@@ -0,0 +1,92 @@
+#ifndef RA2882ETHEND_H
+#define RA2882ETHEND_H
+void fe_sw_init(void);
+
+#endif
-Index: linux-3.14.16/drivers/net/ethernet/raeth/raether_pdma.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/raether_pdma.c 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether_pdma.c
@@ -0,0 +1,212 @@
+#include <linux/module.h>
+#include <linux/version.h>
+EXPORT_SYMBOL(ei_xmit_housekeeping);
+EXPORT_SYMBOL(fe_dma_init);
+EXPORT_SYMBOL(rt2880_eth_send);
-Index: linux-3.14.16/drivers/net/ethernet/raeth/raether_qdma.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/net/ethernet/raeth/raether_qdma.c 2014-08-24 15:51:48.542654066 +0200
+--- /dev/null
++++ b/drivers/net/ethernet/raeth/raether_qdma.c
@@ -0,0 +1,805 @@
+#include <linux/module.h>
+#include <linux/version.h>
3 files changed, 199 insertions(+)
create mode 100644 drivers/usb/phy/ralink-phy.c
-Index: linux-3.14.16/drivers/usb/phy/Kconfig
-===================================================================
---- linux-3.14.16.orig/drivers/usb/phy/Kconfig 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/usb/phy/Kconfig 2014-08-24 12:39:21.094371467 +0200
-@@ -251,6 +251,14 @@
+--- a/drivers/usb/phy/Kconfig
++++ b/drivers/usb/phy/Kconfig
+@@ -251,6 +251,14 @@ config USB_RCAR_GEN2_PHY
To compile this driver as a module, choose M here: the
module will be called phy-rcar-gen2-usb.
config USB_ULPI
bool "Generic ULPI Transceiver Driver"
depends on ARM
-Index: linux-3.14.16/drivers/usb/phy/Makefile
-===================================================================
---- linux-3.14.16.orig/drivers/usb/phy/Makefile 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/usb/phy/Makefile 2014-08-24 12:39:21.094371467 +0200
-@@ -33,3 +33,4 @@
+--- a/drivers/usb/phy/Makefile
++++ b/drivers/usb/phy/Makefile
+@@ -33,3 +33,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-
obj-$(CONFIG_USB_ULPI) += phy-ulpi.o
obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o
obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o
+obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o
-Index: linux-3.14.16/drivers/usb/phy/ralink-phy.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/usb/phy/ralink-phy.c 2014-08-24 14:28:35.886531881 +0200
+--- /dev/null
++++ b/drivers/usb/phy/ralink-phy.c
@@ -0,0 +1,191 @@
+/*
+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org>
drivers/usb/host/ohci-platform.c | 37 +++++++++++++++++++++++++++++++------
3 files changed, 50 insertions(+), 11 deletions(-)
-Index: linux-3.14.16/drivers/usb/Makefile
-===================================================================
---- linux-3.14.16.orig/drivers/usb/Makefile 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/usb/Makefile 2014-08-24 14:33:57.590539754 +0200
-@@ -11,6 +11,8 @@
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -11,6 +11,8 @@ obj-$(CONFIG_USB_DWC2) += dwc2/
obj-$(CONFIG_USB_MON) += mon/
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
-@@ -41,7 +43,6 @@
+@@ -41,7 +43,6 @@ obj-$(CONFIG_USB_TMC) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
obj-$(CONFIG_USB_MICROTEK) += image/
obj-$(CONFIG_USB_SERIAL) += serial/
-Index: linux-3.14.16/drivers/usb/host/ehci-platform.c
-===================================================================
---- linux-3.14.16.orig/drivers/usb/host/ehci-platform.c 2014-08-24 12:39:18.806371411 +0200
-+++ linux-3.14.16/drivers/usb/host/ehci-platform.c 2014-08-24 12:39:21.102371467 +0200
+--- a/drivers/usb/host/ehci-platform.c
++++ b/drivers/usb/host/ehci-platform.c
@@ -29,6 +29,8 @@
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include "ehci.h"
-@@ -124,6 +126,15 @@
+@@ -124,6 +126,15 @@ static int ehci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
-@@ -161,6 +172,9 @@
+@@ -161,6 +172,9 @@ static int ehci_platform_remove(struct p
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
return 0;
}
-@@ -205,9 +219,8 @@
+@@ -205,9 +219,8 @@ static int ehci_platform_resume(struct d
#define ehci_platform_resume NULL
#endif /* CONFIG_PM */
{}
};
-@@ -231,7 +244,7 @@
+@@ -231,7 +244,7 @@ static struct platform_driver ehci_platf
.owner = THIS_MODULE,
.name = "ehci-platform",
.pm = &ehci_platform_pm_ops,
}
};
-Index: linux-3.14.16/drivers/usb/host/ohci-platform.c
-===================================================================
---- linux-3.14.16.orig/drivers/usb/host/ohci-platform.c 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/usb/host/ohci-platform.c 2014-08-24 12:41:51.422375146 +0200
+--- a/drivers/usb/host/ohci-platform.c
++++ b/drivers/usb/host/ohci-platform.c
@@ -22,18 +22,22 @@
#include <linux/platform_device.h>
#include <linux/usb/ohci_pdriver.h>
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
if (pdata->big_endian_desc)
-@@ -63,11 +67,18 @@
+@@ -63,11 +67,18 @@ static int ohci_platform_probe(struct pl
int irq;
int err = -ENOMEM;
if (usb_disabled())
return -ENODEV;
-@@ -99,6 +110,12 @@
+@@ -99,6 +110,12 @@ static int ohci_platform_probe(struct pl
hcd->rsrc_start = res_mem->start;
hcd->rsrc_len = resource_size(res_mem);
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
-@@ -134,6 +151,9 @@
+@@ -134,6 +151,9 @@ static int ohci_platform_remove(struct p
if (pdata->power_off)
pdata->power_off(dev);
return 0;
}
-@@ -180,6 +200,11 @@
+@@ -180,6 +200,11 @@ static int ohci_platform_resume(struct d
#define ohci_platform_resume NULL
#endif /* CONFIG_PM */
static const struct platform_device_id ohci_platform_table[] = {
{ "ohci-platform", 0 },
{ }
-@@ -200,6 +225,7 @@
+@@ -200,6 +225,7 @@ static struct platform_driver ohci_platf
.owner = THIS_MODULE,
.name = "ohci-platform",
.pm = &ohci_platform_pm_ops,
create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h
create mode 100644 drivers/usb/dwc_otg/linux/dwc_otg_plat.h
-diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
-index 2e6b832..45d766e 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -88,6 +88,8 @@ if USB
source "drivers/usb/mon/Kconfig"
source "drivers/usb/wusbcore/Kconfig"
-diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
-index aaa15d9..5205cf0 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/
obj-$(CONFIG_USB_MON) += mon/
-diff --git a/drivers/usb/dwc_otg/Kconfig b/drivers/usb/dwc_otg/Kconfig
-new file mode 100644
-index 0000000..6dd75f1
--- /dev/null
+++ b/drivers/usb/dwc_otg/Kconfig
@@ -0,0 +1,24 @@
+config DWC_OTG_DEBUG
+ bool "Enable debug mode"
+ depends on DWC_OTG
-diff --git a/drivers/usb/dwc_otg/Makefile b/drivers/usb/dwc_otg/Makefile
-new file mode 100644
-index 0000000..95c5b66
--- /dev/null
+++ b/drivers/usb/dwc_otg/Makefile
@@ -0,0 +1,25 @@
+dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o
+dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o
+dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o
-diff --git a/drivers/usb/dwc_otg/dummy_audio.c b/drivers/usb/dwc_otg/dummy_audio.c
-new file mode 100644
-index 0000000..225decf
--- /dev/null
+++ b/drivers/usb/dwc_otg/dummy_audio.c
@@ -0,0 +1,1575 @@
+ remove_proc_entry("isoc_test", NULL);
+}
+module_exit (cleanup);
-diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.c b/drivers/usb/dwc_otg/dwc_otg_attr.c
-new file mode 100644
-index 0000000..8543537
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_attr.c
@@ -0,0 +1,966 @@
+ device_remove_file(dev, &dev_attr_rd_reg_test);
+ device_remove_file(dev, &dev_attr_wr_reg_test);
+}
-diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.h b/drivers/usb/dwc_otg/dwc_otg_attr.h
-new file mode 100644
-index 0000000..0862b27
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_attr.h
@@ -0,0 +1,67 @@
+void dwc_otg_attr_remove (struct device *dev);
+
+#endif
-diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.c b/drivers/usb/dwc_otg/dwc_otg_cil.c
-new file mode 100644
-index 0000000..89aa83e
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_cil.c
@@ -0,0 +1,3692 @@
+}
+
+#endif //DWC_EN_ISOC
-diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.h b/drivers/usb/dwc_otg/dwc_otg_cil.h
-new file mode 100644
-index 0000000..9507992
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_cil.h
@@ -0,0 +1,1098 @@
+
+#endif
+
-diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
-new file mode 100644
-index 0000000..61b17b3
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c
@@ -0,0 +1,750 @@
+
+ return retval;
+}
-diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c
-new file mode 100644
-index 0000000..263494c
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_driver.c
@@ -0,0 +1,1273 @@
+ </td></tr>
+
+*/
-diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.h b/drivers/usb/dwc_otg/dwc_otg_driver.h
-new file mode 100644
-index 0000000..fd7f0a4
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_driver.h
@@ -0,0 +1,83 @@
+} dwc_otg_device_t;
+
+#endif
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.c b/drivers/usb/dwc_otg/dwc_otg_hcd.c
-new file mode 100644
-index 0000000..fe643b6
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c
@@ -0,0 +1,2852 @@
+#endif
+}
+#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.h b/drivers/usb/dwc_otg/dwc_otg_hcd.h
-new file mode 100644
-index 0000000..ee41dc9
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h
@@ -0,0 +1,668 @@
+#endif
+#endif
+#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
-new file mode 100644
-index 0000000..bdf2db9
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c
@@ -0,0 +1,1873 @@
+}
+
+#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
-new file mode 100644
-index 0000000..cfb1f16
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c
@@ -0,0 +1,684 @@
+}
+
+#endif /* DWC_DEVICE_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.c b/drivers/usb/dwc_otg/dwc_otg_pcd.c
-new file mode 100644
-index 0000000..030a3f2
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c
@@ -0,0 +1,2523 @@
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+#endif /* DWC_HOST_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.h b/drivers/usb/dwc_otg/dwc_otg_pcd.h
-new file mode 100644
-index 0000000..48de957
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h
@@ -0,0 +1,248 @@
+
+#endif
+#endif /* DWC_HOST_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
-new file mode 100644
-index 0000000..fd44fd8
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c
@@ -0,0 +1,3654 @@
+}
+
+#endif /* DWC_HOST_ONLY */
-diff --git a/drivers/usb/dwc_otg/dwc_otg_regs.h b/drivers/usb/dwc_otg/dwc_otg_regs.h
-new file mode 100644
-index 0000000..8265766
--- /dev/null
+++ b/drivers/usb/dwc_otg/dwc_otg_regs.h
@@ -0,0 +1,2075 @@
+
+
+#endif
-diff --git a/drivers/usb/dwc_otg/linux/dwc_otg_plat.h b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
-new file mode 100644
-index 0000000..618151b
--- /dev/null
+++ b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h
@@ -0,0 +1,260 @@
+
+#endif
+
---
-1.7.10.4
-
create mode 100644 drivers/usb/host/xhci-mtk.c
create mode 100644 drivers/usb/host/xhci-mtk.h
-diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
-index d59d993..81bbb65 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
-@@ -215,9 +215,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+@@ -215,9 +215,13 @@ int usb_hcd_pci_probe(struct pci_dev *de
goto disable_pci;
}
if (driver->flags & HCD_MEMORY) {
/* EHCI, OHCI */
hcd->rsrc_start = pci_resource_start(dev, 0);
-diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
-index 64ea219..c8cf5a6 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
-@@ -1251,7 +1251,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type)
+@@ -1270,7 +1270,7 @@ static void hub_quiesce(struct usb_hub *
if (type != HUB_SUSPEND) {
/* Disconnect all the children */
for (i = 0; i < hdev->maxchild; ++i) {
usb_disconnect(&hub->ports[i]->child);
}
}
-diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
-index 51542f8..0b9e0b3 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -191,6 +191,7 @@ exit:
+ device_unregister(&hub->ports[port1 - 1]->dev);
}
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index a9707da..22aab121 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -27,7 +27,13 @@ config USB_XHCI_HCD
endif # USB_XHCI_HCD
-diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
-index 7530468..6614620 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -15,7 +15,13 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o
obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
-diff --git a/drivers/usb/host/mtk-phy-7621.c b/drivers/usb/host/mtk-phy-7621.c
-new file mode 100644
-index 0000000..4e9c0d7
--- /dev/null
+++ b/drivers/usb/host/mtk-phy-7621.c
@@ -0,0 +1,445 @@
+}
+
+#endif
-diff --git a/drivers/usb/host/mtk-phy-7621.h b/drivers/usb/host/mtk-phy-7621.h
-new file mode 100644
-index 0000000..41b0c77
--- /dev/null
+++ b/drivers/usb/host/mtk-phy-7621.h
@@ -0,0 +1,2871 @@
+
+#endif
+#endif
-diff --git a/drivers/usb/host/mtk-phy-ahb.c b/drivers/usb/host/mtk-phy-ahb.c
-new file mode 100644
-index 0000000..ebaf7c8
--- /dev/null
+++ b/drivers/usb/host/mtk-phy-ahb.c
@@ -0,0 +1,58 @@
+
+#endif
+
-diff --git a/drivers/usb/host/mtk-phy.c b/drivers/usb/host/mtk-phy.c
-new file mode 100644
-index 0000000..7ed8f01
--- /dev/null
+++ b/drivers/usb/host/mtk-phy.c
@@ -0,0 +1,102 @@
+ return ((U3PhyReadReg32(addr) & mask) >> offset);
+}
+
-diff --git a/drivers/usb/host/mtk-phy.h b/drivers/usb/host/mtk-phy.h
-new file mode 100644
-index 0000000..07ed410
--- /dev/null
+++ b/drivers/usb/host/mtk-phy.h
@@ -0,0 +1,179 @@
+/***********************************/
+#endif
+
-diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h
-index 638e88f..b945c3e 100644
--- a/drivers/usb/host/pci-quirks.h
+++ b/drivers/usb/host/pci-quirks.h
@@ -1,7 +1,7 @@
+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM)
void uhci_reset_hc(struct pci_dev *pdev, unsigned long base);
int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base);
- int usb_amd_find_chipset_info(void);
-diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
-index eb009a4..b491120 100644
+ #endif /* CONFIG_PCI */
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -21,6 +21,9 @@
#define XHCI_INIT_VALUE 0x0
-diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
-index bce4391..e156473 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
-@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
+@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment
static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg)
{
if (seg->trbs) {
dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma);
seg->trbs = NULL;
-@@ -1375,9 +1378,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
+@@ -1375,9 +1378,17 @@ int xhci_endpoint_init(struct xhci_hcd *
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
}
break;
default:
BUG();
-diff --git a/drivers/usb/host/xhci-mtk-power.c b/drivers/usb/host/xhci-mtk-power.c
-new file mode 100644
-index 0000000..09870fa
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-power.c
@@ -0,0 +1,115 @@
+ }
+}
+
-diff --git a/drivers/usb/host/xhci-mtk-power.h b/drivers/usb/host/xhci-mtk-power.h
-new file mode 100644
-index 0000000..e57c243
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-power.h
@@ -0,0 +1,13 @@
+void enablePortClockPower(int port_index, int port_rev);
+
+#endif
-diff --git a/drivers/usb/host/xhci-mtk-scheduler.c b/drivers/usb/host/xhci-mtk-scheduler.c
-new file mode 100644
-index 0000000..bf6a8bd
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-scheduler.c
@@ -0,0 +1,608 @@
+ return SCH_FAIL;
+ }
+}
-diff --git a/drivers/usb/host/xhci-mtk-scheduler.h b/drivers/usb/host/xhci-mtk-scheduler.h
-new file mode 100644
-index 0000000..c55dfb1
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk-scheduler.h
@@ -0,0 +1,77 @@
+
+
+#endif
-diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
-new file mode 100644
-index 0000000..2eed0a1
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.c
@@ -0,0 +1,265 @@
+
+
+
-diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h
-new file mode 100644
-index 0000000..0f2d5e8
--- /dev/null
+++ b/drivers/usb/host/xhci-mtk.h
@@ -0,0 +1,120 @@
+
+
+#endif
-diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
-index 8abda5c..a11b82f 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
-@@ -27,6 +27,13 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
+@@ -27,6 +27,13 @@ static void xhci_plat_quirks(struct devi
* dev struct in order to setup MSI
*/
xhci->quirks |= XHCI_PLAT;
}
/* called during probe() after chip reset completes */
-@@ -99,13 +106,19 @@ static int xhci_plat_probe(struct platform_device *pdev)
+@@ -99,13 +106,19 @@ static int xhci_plat_probe(struct platfo
driver = &xhci_plat_xhci_driver;
/* Initialize dma_mask and coherent_dma_mask to 32-bits */
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
-@@ -120,8 +133,13 @@ static int xhci_plat_probe(struct platform_device *pdev)
+@@ -120,8 +133,13 @@ static int xhci_plat_probe(struct platfo
if (!hcd)
return -ENOMEM;
if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
driver->description)) {
-diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
-index 0ed64eb..415bec0 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
-@@ -232,7 +232,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+@@ -232,7 +232,6 @@ static void inc_enq(struct xhci_hcd *xhc
*/
if (!chain && !more_trbs_coming)
break;
/* If we're not dealing with 0.95 hardware or
* isoc rings on AMD 0.96 host,
* carry over the chain bit of the previous TRB
-@@ -268,16 +267,20 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
+@@ -268,16 +267,20 @@ static void inc_enq(struct xhci_hcd *xhc
static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
unsigned int num_trbs)
{
return 1;
}
-@@ -2992,6 +2995,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+@@ -2991,6 +2994,7 @@ static int prepare_ring(struct xhci_hcd
next = ring->enqueue;
while (last_trb(xhci, ring, ring->enq_seg, next)) {
/* If we're not dealing with 0.95 hardware or isoc rings
* on AMD 0.96 host, clear the chain bit.
*/
-@@ -3001,7 +3005,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
+@@ -3000,7 +3004,9 @@ static int prepare_ring(struct xhci_hcd
next->link.control &= cpu_to_le32(~TRB_CHAIN);
else
next->link.control |= cpu_to_le32(TRB_CHAIN);
wmb();
next->link.control ^= cpu_to_le32(TRB_CYCLE);
-@@ -3131,6 +3137,9 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
+@@ -3130,6 +3136,9 @@ static void giveback_first_trb(struct xh
start_trb->field[3] |= cpu_to_le32(start_cycle);
else
start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
}
-@@ -3186,6 +3195,29 @@ static u32 xhci_td_remainder(unsigned int remainder)
+@@ -3185,6 +3194,29 @@ static u32 xhci_td_remainder(unsigned in
return (remainder >> 10) << 17;
}
/*
* For xHCI 1.0 host controllers, TD size is the number of max packet sized
* packets remaining in the TD (*not* including this TRB).
-@@ -3323,6 +3355,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3322,6 +3354,7 @@ static int queue_bulk_sg_tx(struct xhci_
}
/* Set the TRB length, TD size, and interrupter fields. */
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
-@@ -3332,6 +3365,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3331,6 +3364,13 @@ static int queue_bulk_sg_tx(struct xhci_
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
-@@ -3394,6 +3434,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3393,6 +3433,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
int running_total, trb_buff_len, ret;
unsigned int total_packet_count;
u64 addr;
if (urb->num_sgs)
return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index);
-@@ -3419,6 +3462,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3418,6 +3461,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
running_total += TRB_MAX_BUFF_SIZE;
}
/* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */
ret = prepare_transfer(xhci, xhci->devs[slot_id],
ep_index, urb->stream_id,
-@@ -3478,6 +3540,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3477,6 +3539,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
field |= TRB_ISP;
/* Set the TRB length, TD size, and interrupter fields. */
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
urb->transfer_buffer_length -
-@@ -3487,6 +3550,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3486,6 +3549,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *
trb_buff_len, total_packet_count, urb,
num_trbs - 1);
}
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
-@@ -3576,7 +3643,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3575,7 +3642,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
field |= 0x1;
/* xHCI 1.0 6.4.1.2.1: Transfer Type field */
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
field |= TRB_TX_TYPE(TRB_DATA_IN);
-@@ -3600,7 +3671,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3599,7 +3670,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
field = TRB_TYPE(TRB_DATA);
length_field = TRB_LEN(urb->transfer_buffer_length) |
TRB_INTR_TARGET(0);
if (urb->transfer_buffer_length > 0) {
if (setup->bRequestType & USB_DIR_IN)
-@@ -3611,7 +3687,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3610,7 +3686,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *
length_field,
field | ep_ring->cycle_state);
}
/* Save the DMA address of the last TRB in the TD */
td->last_trb = ep_ring->enqueue;
-@@ -3723,6 +3799,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3722,6 +3798,9 @@ static int xhci_queue_isoc_tx(struct xhc
u64 start_addr, addr;
int i, j;
bool more_trbs_coming;
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
-@@ -3736,6 +3815,21 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3735,6 +3814,21 @@ static int xhci_queue_isoc_tx(struct xhc
start_trb = &ep_ring->enqueue->generic;
start_cycle = ep_ring->cycle_state;
urb_priv = urb->hcpriv;
/* Queue the first TRB, even if it's zero-length */
for (i = 0; i < num_tds; i++) {
-@@ -3807,9 +3901,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3806,9 +3900,13 @@ static int xhci_queue_isoc_tx(struct xhc
} else {
td->last_trb = ep_ring->enqueue;
field |= TRB_IOC;
/* Set BEI bit except for the last td */
if (i < num_tds - 1)
field |= TRB_BEI;
-@@ -3824,6 +3922,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3823,6 +3921,7 @@ static int xhci_queue_isoc_tx(struct xhc
trb_buff_len = td_remain_len;
/* Set the TRB length, TD size, & interrupter fields. */
if (xhci->hci_version < 0x100) {
remainder = xhci_td_remainder(
td_len - running_total);
-@@ -3833,6 +3932,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
+@@ -3832,6 +3931,10 @@ static int xhci_queue_isoc_tx(struct xhc
total_packet_count, urb,
(trbs_per_td - j - 1));
}
length_field = TRB_LEN(trb_buff_len) |
remainder |
TRB_INTR_TARGET(0);
-diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
-index 924a6cc..27b7d2f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -32,6 +32,16 @@
static int xhci_free_msi(struct xhci_hcd *xhci)
{
int i;
-@@ -399,6 +421,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
+@@ -399,6 +421,7 @@ static int xhci_try_enable_msi(struct us
return ret;
}
hcd->irq = pdev->irq;
return 0;
}
-@@ -442,6 +465,11 @@ static void compliance_mode_recovery(unsigned long arg)
+@@ -442,6 +465,11 @@ static void compliance_mode_recovery(uns
"Attempting compliance mode recovery");
hcd = xhci->shared_hcd;
if (hcd->state == HC_STATE_SUSPENDED)
usb_hcd_resume_root_hub(hcd);
-@@ -491,6 +519,9 @@ bool xhci_compliance_mode_recovery_timer_quirk_check(void)
+@@ -491,6 +519,9 @@ bool xhci_compliance_mode_recovery_timer
{
const char *dmi_product_name, *dmi_sys_vendor;
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Finished xhci_run for USB2 roothub");
return 0;
-@@ -970,7 +1012,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
+@@ -970,7 +1012,6 @@ int xhci_resume(struct xhci_hcd *xhci, b
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
!(xhci_all_ports_seen_u0(xhci))) {
del_timer_sync(&xhci->comp_mode_recovery_timer);
-@@ -1569,6 +1610,13 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+@@ -1573,6 +1614,13 @@ int xhci_drop_endpoint(struct usb_hcd *h
u32 drop_flag;
u32 new_add_flags, new_drop_flags, new_slot_info;
int ret;
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0)
-@@ -1626,6 +1674,40 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+@@ -1630,6 +1678,40 @@ int xhci_drop_endpoint(struct usb_hcd *h
xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
(unsigned int) ep->desc.bEndpointAddress,
udev->slot_id,
-@@ -1661,6 +1743,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+@@ -1665,6 +1747,18 @@ int xhci_add_endpoint(struct usb_hcd *hc
u32 new_add_flags, new_drop_flags, new_slot_info;
struct xhci_virt_device *virt_dev;
int ret = 0;
ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
if (ret <= 0) {
-@@ -1728,6 +1822,56 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
+@@ -1732,6 +1826,56 @@ int xhci_add_endpoint(struct usb_hcd *hc
return -ENOMEM;
}
ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs);
new_add_flags = le32_to_cpu(ctrl_ctx->add_flags);
-@@ -2722,7 +2866,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
+@@ -2726,7 +2870,7 @@ int xhci_check_bandwidth(struct usb_hcd
if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) &&
ctrl_ctx->drop_flags == 0)
return 0;
xhci_dbg(xhci, "New Input Control Context:\n");
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
xhci_dbg_ctx(xhci, virt_dev->in_ctx,
-@@ -4349,10 +4493,14 @@ static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci,
+@@ -4352,10 +4496,14 @@ static u16 xhci_call_host_update_timeout
u16 *timeout)
{
if (state == USB3_LPM_U1) {
return xhci_calculate_intel_u2_timeout(udev, desc);
}
-@@ -4737,7 +4885,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+@@ -4740,7 +4888,9 @@ int xhci_gen_setup(struct usb_hcd *hcd,
hcd->self.no_sg_constraint = 1;
/* XHCI controllers don't stop the ep queue on short packets :| */
if (usb_hcd_is_primary_hcd(hcd)) {
xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
-@@ -4800,6 +4950,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
+@@ -4803,6 +4953,10 @@ int xhci_gen_setup(struct usb_hcd *hcd,
goto error;
xhci_dbg(xhci, "Reset complete\n");
/* Set dma_mask and coherent_dma_mask to 64-bits,
* if xHC supports 64-bit addressing */
if (HCC_64BIT_ADDR(xhci->hcc_params) &&
-@@ -4824,8 +4978,21 @@ MODULE_DESCRIPTION(DRIVER_DESC);
+@@ -4827,8 +4981,21 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_LICENSE("GPL");
int retval;
retval = xhci_register_pci();
-@@ -4838,6 +5005,33 @@ static int __init xhci_hcd_init(void)
+@@ -4841,6 +5008,33 @@ static int __init xhci_hcd_init(void)
pr_debug("Problem registering platform driver.\n");
goto unreg_pci;
}
/*
* Check the compiler generated sizes of structures that must be laid
* out in specific ways for hardware access.
-@@ -4855,6 +5049,7 @@ static int __init xhci_hcd_init(void)
+@@ -4858,6 +5052,7 @@ static int __init xhci_hcd_init(void)
BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8);
/* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */
BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8);
return 0;
unreg_pci:
xhci_unregister_pci();
-diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
-index 58ed9d0..dda072f 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -29,9 +29,24 @@
/* xHCI PCI Configuration Registers */
#define XHCI_SBRN_OFFSET (0x60)
-@@ -1579,8 +1594,12 @@ struct xhci_hcd {
+@@ -1577,8 +1592,12 @@ struct xhci_hcd {
/* Compliance Mode Recovery Data */
struct timer_list comp_mode_recovery_timer;
u32 port_status_u0;
};
/* convert between an HCD pointer and the corresponding EHCI_HCD */
-@@ -1728,7 +1747,7 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
+@@ -1726,7 +1745,7 @@ void xhci_urb_free_priv(struct xhci_hcd
void xhci_free_command(struct xhci_hcd *xhci,
struct xhci_command *command);
/* xHCI PCI glue */
int xhci_register_pci(void);
void xhci_unregister_pci(void);
---
-1.7.10.4
-
drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 89b9d68..8d92fc1 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1956,7 +1956,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip)
+@@ -1957,7 +1957,7 @@ static int __xipram do_erase_chip(struct
chip->erase_suspended = 0;
}
break;
if (time_after(jiffies, timeo)) {
-@@ -2045,7 +2045,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip,
+@@ -2046,7 +2046,7 @@ static int __xipram do_erase_oneblock(st
chip->erase_suspended = 0;
}
xip_enable(map, chip, adr);
break;
}
---
-1.7.10.4
-
drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
-diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c
-index 8d92fc1..aa06d16 100644
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -41,7 +41,7 @@
static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *);
static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *);
static void cfi_amdstd_sync (struct mtd_info *);
-@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd)
+@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct m
}
#endif
static void fixup_use_write_buffers(struct mtd_info *mtd)
{
struct map_info *map = mtd->priv;
-@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd)
+@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(stru
mtd->_write = cfi_amdstd_write_buffers;
}
}
/* Atmel chips don't use the same PRI format as AMD chips */
static void fixup_convert_atmel_pri(struct mtd_info *mtd)
-@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct
/*
* FIXME: interleaved mode not tested, and probably not supported!
*/
static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
unsigned long adr, const u_char *buf,
int len)
-@@ -1584,7 +1589,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip,
+@@ -1585,7 +1590,6 @@ static int __xipram do_write_buffer(stru
return ret;
}
static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
-@@ -1659,6 +1663,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -1660,6 +1664,7 @@ static int cfi_amdstd_write_buffers(stru
return 0;
}
/*
* Wait for the flash chip to become ready to write data
---
-1.7.10.4
-
create mode 100644 drivers/mtd/maps/ralink_nand.c
create mode 100644 drivers/mtd/maps/ralink_nand.h
-diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
-index 310dc7c..344f460d 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR
+ depends on RALINK && SOC_MT7620
+
endmenu
-diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
-index 141c91a..94d2aa0 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -43,3 +43,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o
+obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o
+
-diff --git a/drivers/mtd/maps/ralink_nand.c b/drivers/mtd/maps/ralink_nand.c
-new file mode 100644
-index 0000000..64f9119
--- /dev/null
+++ b/drivers/mtd/maps/ralink_nand.c
@@ -0,0 +1,2136 @@
+
+
+MODULE_LICENSE("GPL");
-diff --git a/drivers/mtd/maps/ralink_nand.h b/drivers/mtd/maps/ralink_nand.h
-new file mode 100644
-index 0000000..a408ae9
--- /dev/null
+++ b/drivers/mtd/maps/ralink_nand.h
@@ -0,0 +1,232 @@
+
+
+#endif
---
-1.7.10.4
-
drivers/mtd/devices/m25p80.c | 128 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 128 insertions(+)
-diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
-index ad19139..6f4290e 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
-@@ -556,6 +556,58 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
+@@ -562,6 +562,58 @@ static int m25p80_read(struct mtd_info *
return 0;
}
/*
* Write an address range to the flash chip. Data must be written in
* FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -643,6 +695,76 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len,
+@@ -649,6 +701,76 @@ static int m25p80_write(struct mtd_info
return 0;
}
static int sst_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
-@@ -1252,6 +1374,12 @@ static int m25p_probe(struct spi_device *spi)
+@@ -1260,6 +1382,12 @@ static int m25p_probe(struct spi_device
return -EINVAL;
}
flash->program_opcode = OPCODE_PP;
if (info->addr_width)
---
-1.7.10.4
-
create mode 100644 drivers/mtd/nand/nand_device_list.h
create mode 100644 drivers/mtd/nand/partition.h
-diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
-index 90ff447..5cafa39 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -510,4 +510,10 @@ config MTD_NAND_XWAY
+ select MTD_NAND_ECC
+
endif # MTD_NAND
-diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
-index 542b568..c68c96c 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
-@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740
obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o
nand-objs := nand_base.o nand_bbt.o
-diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c
-new file mode 100644
-index 0000000..0462871
--- /dev/null
+++ b/drivers/mtd/nand/bmt.c
@@ -0,0 +1,750 @@
+MODULE_AUTHOR("MediaTek");
+MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver");
+#endif
-diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h
-new file mode 100644
-index 0000000..2d30ea9
--- /dev/null
+++ b/drivers/mtd/nand/bmt.h
@@ -0,0 +1,80 @@
+unsigned short get_mapping_block_index(int index);
+
+#endif // #ifndef __BMT_H__
-diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c
-new file mode 100644
-index 0000000..9fb5235
--- /dev/null
+++ b/drivers/mtd/nand/dev-nand.c
@@ -0,0 +1,63 @@
+ return retval;
+}
+arch_initcall(mtk_nand_register);
-diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h
-new file mode 100644
-index 0000000..a7b9647
--- /dev/null
+++ b/drivers/mtd/nand/mt6575_typedefs.h
@@ -0,0 +1,340 @@
+
+#endif // _MT6575_TYPEDEFS_H
+
-diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c
-new file mode 100644
-index 0000000..00e150c
--- /dev/null
+++ b/drivers/mtd/nand/mtk_nand.c
@@ -0,0 +1,2304 @@
+module_init(mtk_nand_init);
+module_exit(mtk_nand_exit);
+MODULE_LICENSE("GPL");
-diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h
-new file mode 100644
-index 0000000..6db88c4
--- /dev/null
+++ b/drivers/mtd/nand/mtk_nand.h
@@ -0,0 +1,452 @@
+extern u32 CFG_BLOCKSIZE;
+#endif
+#endif
-diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
-index 9715a7b..86e2a12 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
-@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_128 = {
+@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_12
.length = 78} }
};
static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
-@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_info *mtd,
+@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_inf
*
* Release chip lock and wake up anyone waiting on the device.
*/
{
struct nand_chip *chip = mtd->priv;
-@@ -783,7 +783,7 @@ static void panic_nand_get_device(struct nand_chip *chip,
+@@ -783,7 +783,7 @@ static void panic_nand_get_device(struct
*
* Get the device and lock it for exclusive access
*/
nand_get_device(struct mtd_info *mtd, int new_state)
{
struct nand_chip *chip = mtd->priv;
-diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
-index c0615d1..b34cb41 100644
--- a/drivers/mtd/nand/nand_bbt.c
+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -1360,4 +1360,23 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
+@@ -1360,4 +1360,23 @@ int nand_markbad_bbt(struct mtd_info *mt
return ret;
}
+}
+
EXPORT_SYMBOL(nand_scan_bbt);
-diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h
-new file mode 100644
-index 0000000..82e957d
--- /dev/null
+++ b/drivers/mtd/nand/nand_def.h
@@ -0,0 +1,123 @@
+#include "mt6575_typedefs.h"
+
+#endif /* __NAND_DEF_H__ */
-diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h
-new file mode 100644
-index 0000000..4c36b3a
--- /dev/null
+++ b/drivers/mtd/nand/nand_device_list.h
@@ -0,0 +1,55 @@
+
+
+#endif
-diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h
-new file mode 100644
-index 0000000..034e1af
--- /dev/null
+++ b/drivers/mtd/nand/partition.h
@@ -0,0 +1,115 @@
+//#endif
+#undef RECONFIG_PARTITION_SIZE
+
---
-1.7.10.4
-
1 file changed, 40 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-diff --git a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
-new file mode 100644
-index 0000000..b4acf02
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt
@@ -0,0 +1,40 @@
+ 30 34 ];
+
+ };
---
-1.7.10.4
-
create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h
create mode 100644 drivers/gpio/gpio-ralink.c
-diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h
-new file mode 100644
-index 0000000..f68ee16
--- /dev/null
+++ b/arch/mips/include/asm/mach-ralink/gpio.h
@@ -0,0 +1,24 @@
+#define gpio_to_irq __gpio_to_irq
+
+#endif /* __ASM_MACH_RALINK_GPIO_H */
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 903f24d..2d75a68 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -260,6 +260,12 @@ config GPIO_SCH311X
config GPIO_SPEAR_SPICS
bool "ST SPEAr13xx SPI Chip Select as GPIO support"
depends on PLAT_SPEAR
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 5d50179..2cbdbe6 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
+@@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf85
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o
-diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c
-new file mode 100644
-index 0000000..7e5a2e9
--- /dev/null
+++ b/drivers/gpio/gpio-ralink.c
@@ -0,0 +1,345 @@
+}
+
+subsys_initcall(ralink_gpio_init);
---
-1.7.10.4
-
4 files changed, 187 insertions(+)
create mode 100644 drivers/gpio/gpio-mt7621.c
-diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
-index 4ac98ca..fd3bbb1 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -437,6 +437,9 @@ config RALINK
config SGI_IP22
bool "SGI IP22 (Indy/Indigo2)"
-diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 2d75a68..5dff8d5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -827,6 +827,12 @@ config GPIO_BCM_KONA
comment "USB GPIO expanders:"
config GPIO_VIPERBOARD
-diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index 2cbdbe6..2365e34 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
-@@ -100,3 +100,4 @@ obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
+@@ -100,3 +100,4 @@ obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350
obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o
+obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o
-diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
-new file mode 100644
-index 0000000..7ae7eb9
--- /dev/null
+++ b/drivers/gpio/gpio-mt7621.c
@@ -0,0 +1,177 @@
+}
+
+subsys_initcall(mediatek_gpio_init);
---
-1.7.10.4
-
1 file changed, 28 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt
-diff --git a/Documentation/devicetree/bindings/spi/spi-rt2880.txt b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
-new file mode 100644
-index 0000000..068bc90
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt
@@ -0,0 +1,28 @@
+ };
+ };
+
---
-1.7.10.4
-
3 files changed, 439 insertions(+)
create mode 100644 drivers/spi/spi-rt2880.c
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 581ee2a..009f8f3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -381,6 +381,12 @@ config SPI_RSPI
+@@ -390,6 +390,12 @@ config SPI_RSPI
help
SPI driver for Renesas RSPI and QSPI blocks.
config SPI_S3C24XX
tristate "Samsung S3C24XX series SPI"
depends on ARCH_S3C24XX
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 95af48d..1f647e5 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -60,6 +60,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o
+@@ -61,6 +61,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_
obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o
obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o
obj-$(CONFIG_SPI_RSPI) += spi-rspi.o
obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o
spi-s3c24xx-hw-y := spi-s3c24xx.o
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
-diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c
-new file mode 100644
-index 0000000..ac9de67
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
@@ -0,0 +1,432 @@
+MODULE_AUTHOR("Sergiy <piratfm@gmail.com>");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_LICENSE("GPL");
---
-1.7.10.4
-
drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 205 insertions(+), 13 deletions(-)
-diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c
-index ac9de67..1c6b72d 100644
--- a/drivers/spi/spi-rt2880.c
+++ b/drivers/spi/spi-rt2880.c
@@ -21,8 +21,13 @@
};
static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi)
-@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
+@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struc
return 0;
}
/*
* called only when no transfer is active on the bus
*/
-@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
+@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_dev
if (rs->speed != speed) {
dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
if (rc)
return rc;
}
-@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
+@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2
rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
}
static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
{
int i;
-@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs)
+@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_r
return -ETIMEDOUT;
}
static int rt2880_spi_transfer_one_message(struct spi_master *master,
struct spi_message *m)
{
-@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_message(struct spi_master *master,
+@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_messa
}
if (!cs_active) {
m->status = status;
spi_finalize_current_message(master);
-@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt2880_spi *rs)
+@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt28
rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
}
struct spi_master *master;
struct rt2880_spi *rs;
unsigned long flags;
-@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platform_device *pdev)
+@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platf
int status = 0;
struct clk *clk;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(base))
-@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platform_device *pdev)
+@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platf
rs->clk = clk;
rs->master = master;
rs->sys_freq = clk_get_rate(rs->clk);
return spi_register_master(master);
}
-@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct platform_device *pdev)
+@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct plat
MODULE_ALIAS("platform:" DRIVER_NAME);
static struct platform_driver rt2880_spi_driver = {
.driver = {
.name = DRIVER_NAME,
---
-1.7.10.4
-
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt
create mode 100644 drivers/i2c/busses/i2c-ralink.c
-Index: linux-3.14.16/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/Documentation/devicetree/bindings/i2c/i2c-ralink.txt 2014-08-24 16:03:20.586671002 +0200
+--- /dev/null
++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt
@@ -0,0 +1,27 @@
+I2C for Ralink platforms
+
+ };
+ };
+};
-Index: linux-3.14.16/drivers/i2c/busses/Kconfig
-===================================================================
---- linux-3.14.16.orig/drivers/i2c/busses/Kconfig 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/i2c/busses/Kconfig 2014-08-24 16:03:20.586671002 +0200
-@@ -659,6 +659,10 @@
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -659,6 +659,10 @@ config I2C_RIIC
This driver can also be built as a module. If so, the module
will be called i2c-riic.
config HAVE_S3C2410_I2C
bool
help
-Index: linux-3.14.16/drivers/i2c/busses/Makefile
-===================================================================
---- linux-3.14.16.orig/drivers/i2c/busses/Makefile 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/i2c/busses/Makefile 2014-08-24 16:03:20.586671002 +0200
-@@ -63,6 +63,7 @@
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o
obj-$(CONFIG_I2C_RIIC) += i2c-riic.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
-Index: linux-3.14.16/drivers/i2c/busses/i2c-ralink.c
-===================================================================
---- /dev/null 1970-01-01 00:00:00.000000000 +0000
-+++ linux-3.14.16/drivers/i2c/busses/i2c-ralink.c 2014-08-27 23:07:01.318731261 +0200
+--- /dev/null
++++ b/drivers/i2c/busses/i2c-ralink.c
@@ -0,0 +1,271 @@
+/*
+ * drivers/i2c/busses/i2c-ralink.c
create mode 100644 drivers/mmc/host/mt6575_sd.h
create mode 100644 drivers/mmc/host/sdhci-mt7620.c
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index 1384f67..09a14cb 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -283,6 +283,17 @@ config MMC_SDHCI_BCM2835
config MMC_OMAP
tristate "TI OMAP Multimedia Card Interface support"
depends on ARCH_OMAP
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 3483b6b..430824f 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o
+@@ -65,6 +65,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhc
obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o
obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o
ifeq ($(CONFIG_CB710_DEBUG),y)
CFLAGS-cb710-mmc += -DDEBUG
-diff --git a/drivers/mmc/host/mt6575_sd.h b/drivers/mmc/host/mt6575_sd.h
-new file mode 100644
-index 0000000..406382c
--- /dev/null
+++ b/drivers/mmc/host/mt6575_sd.h
@@ -0,0 +1,1068 @@
+
+#endif
+
-diff --git a/drivers/mmc/host/sdhci-mt7620.c b/drivers/mmc/host/sdhci-mt7620.c
-new file mode 100644
-index 0000000..a3cb5e4
--- /dev/null
+++ b/drivers/mmc/host/sdhci-mt7620.c
@@ -0,0 +1,2314 @@
+MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>");
+
+EXPORT_SYMBOL(msdc_6575_host);
---
-1.7.10.4
-
5 files changed, 611 insertions(+)
create mode 100644 drivers/dma/ralink-gdma.c
-diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
-index 605b016..a9b31ff 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -351,6 +351,12 @@ config MOXART_DMA
config DMA_ENGINE
bool
-diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
-index a029d0f4..419ccc2 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -44,3 +44,4 @@ obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
obj-$(CONFIG_K3_DMA) += k3dma.o
obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o
-diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
-index ed610b4..cc11e0b 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
-@@ -564,6 +564,32 @@ struct dma_chan *dma_get_any_slave_channel(struct dma_device *device)
+@@ -564,6 +564,32 @@ struct dma_chan *dma_get_any_slave_chann
EXPORT_SYMBOL_GPL(dma_get_any_slave_channel);
/**
* __dma_request_channel - try to allocate an exclusive channel
* @mask: capabilities that the channel must satisfy
* @fn: optional callback to disposition available channels
-diff --git a/drivers/dma/ralink-gdma.c b/drivers/dma/ralink-gdma.c
-new file mode 100644
-index 0000000..2c3cace
--- /dev/null
+++ b/drivers/dma/ralink-gdma.c
@@ -0,0 +1,577 @@
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GDMA4740 DMA driver");
+MODULE_LICENSE("GPLv2");
-diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
-index c5c92d5..482131e 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
-@@ -1072,6 +1072,7 @@ struct dma_chan *dma_request_slave_channel_reason(struct device *dev,
+@@ -1073,6 +1073,7 @@ struct dma_chan *dma_request_slave_chann
const char *name);
struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name);
void dma_release_channel(struct dma_chan *chan);
#else
static inline struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type)
{
---
-1.7.10.4
-
create mode 100644 sound/soc/ralink/mt7620-i2s.c
create mode 100644 sound/soc/ralink/mt7620-wm8960.c
-diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c
-index 405b79c..dfda6e6 100644
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
@@ -15,6 +15,7 @@
__iomem void *rt_memc_membase;
extern struct boot_param_header __dtb_start;
-diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig
-index d62ce48..de91f58 100644
--- a/sound/soc/Kconfig
+++ b/sound/soc/Kconfig
@@ -47,6 +47,7 @@ source "sound/soc/kirkwood/Kconfig"
source "sound/soc/samsung/Kconfig"
source "sound/soc/s6000/Kconfig"
source "sound/soc/sh/Kconfig"
-diff --git a/sound/soc/Makefile b/sound/soc/Makefile
-index 62a1822..1d9398c 100644
--- a/sound/soc/Makefile
+++ b/sound/soc/Makefile
@@ -24,6 +24,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/
obj-$(CONFIG_SND_SOC) += samsung/
obj-$(CONFIG_SND_SOC) += s6000/
obj-$(CONFIG_SND_SOC) += sh/
-diff --git a/sound/soc/ralink/Kconfig b/sound/soc/ralink/Kconfig
-new file mode 100644
-index 0000000..d462622
--- /dev/null
+++ b/sound/soc/ralink/Kconfig
@@ -0,0 +1,15 @@
+ help
+ Say Y if you want to add support for ASoC audio on the Qi LB60 board
+ a.k.a Qi Ben NanoNote.
-diff --git a/sound/soc/ralink/Makefile b/sound/soc/ralink/Makefile
-new file mode 100644
-index 0000000..3d79980
--- /dev/null
+++ b/sound/soc/ralink/Makefile
@@ -0,0 +1,11 @@
+snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o
+
+obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o
-diff --git a/sound/soc/ralink/mt7620-i2s.c b/sound/soc/ralink/mt7620-i2s.c
-new file mode 100644
-index 0000000..846db03
--- /dev/null
+++ b/sound/soc/ralink/mt7620-i2s.c
@@ -0,0 +1,466 @@
+MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mt7620-i2s");
-diff --git a/sound/soc/ralink/mt7620-wm8960.c b/sound/soc/ralink/mt7620-wm8960.c
-new file mode 100644
-index 0000000..c0f6389
--- /dev/null
+++ b/sound/soc/ralink/mt7620-wm8960.c
@@ -0,0 +1,125 @@
+MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qi-lb60-audio");
-diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c
-index aa886cc..3fdc8c8 100644
--- a/sound/soc/soc-io.c
+++ b/sound/soc/soc-io.c
@@ -19,7 +19,6 @@
static int hw_write(struct snd_soc_codec *codec, unsigned int reg,
unsigned int value)
{
-@@ -135,12 +134,3 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec,
+@@ -135,12 +134,3 @@ int snd_soc_codec_set_cache_io(struct sn
return PTR_ERR_OR_ZERO(codec->control_data);
}
EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
-}
-EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io);
-#endif
---
-1.7.10.4
-
3 files changed, 193 insertions(+)
create mode 100644 drivers/watchdog/mt7621_wdt.c
-diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 79d2589..40f4e5d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -1193,6 +1193,13 @@ config RALINK_WDT
+@@ -1202,6 +1202,13 @@ config RALINK_WDT
help
Hardware driver for the Ralink SoC Watchdog Timer.
# PARISC Architecture
# POWERPC Architecture
-diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index 985a66c..bbd5d0d 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
-@@ -138,6 +138,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
+@@ -139,6 +139,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
# PARISC Architecture
-diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c
-new file mode 100644
-index 0000000..29f55c2
--- /dev/null
+++ b/drivers/watchdog/mt7621_wdt.c
@@ -0,0 +1,185 @@
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
---
-1.7.10.4
-
drivers/media/usb/uvc/uvcvideo.h | 3 +
4 files changed, 166 insertions(+)
-diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
-index c3bb250..c6612d4 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
-@@ -2467,6 +2467,20 @@ static struct usb_device_id uvc_ids[] = {
+@@ -2467,6 +2467,20 @@ static struct usb_device_id uvc_ids[] =
.bInterfaceProtocol = 0,
.driver_info = UVC_QUIRK_PROBE_MINMAX
| UVC_QUIRK_IGNORE_SELECTOR_UNIT },
/* Generic USB Video Class */
{ USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) },
{}
-diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c
-index f552ab9..7132ad4 100644
--- a/drivers/media/usb/uvc/uvc_status.c
+++ b/drivers/media/usb/uvc/uvc_status.c
-@@ -139,6 +139,7 @@ static void uvc_status_complete(struct urb *urb)
+@@ -139,6 +139,7 @@ static void uvc_status_complete(struct u
switch (dev->status[0] & 0x0f) {
case UVC_STATUS_TYPE_CONTROL:
uvc_event_control(dev, dev->status, len);
break;
case UVC_STATUS_TYPE_STREAMING:
-@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *dev)
+@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *d
}
pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress);
/* For high-speed interrupt endpoints, the bInterval value is used as
* an exponent of two. Some developers forgot about it.
-diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
-index 898c208..2e06163 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -21,6 +21,11 @@
#include <media/v4l2-common.h>
-@@ -1075,9 +1080,149 @@ static void uvc_video_decode_data(struct uvc_streaming *stream,
+@@ -1080,9 +1085,149 @@ static void uvc_video_decode_data(struct
}
}
/* Mark the buffer as done if the EOF marker is set. */
if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) {
uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n");
-@@ -1478,6 +1623,8 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream,
+@@ -1483,6 +1628,8 @@ static int uvc_init_video_isoc(struct uv
if (npackets == 0)
return -ENOMEM;
size = npackets * psize;
for (i = 0; i < UVC_URBS; ++i) {
-diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
-index 9e35982..3cacdfd 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -137,6 +137,8 @@
};
enum uvc_handle_state {
---
-1.7.10.4
-
include/linux/gpio/consumer.h | 8 +++++
4 files changed, 90 insertions(+), 2 deletions(-)
-diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
-index e0a98f5..f16f271 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -21,6 +21,8 @@
struct gpio_desc;
-@@ -296,3 +298,69 @@ void of_gpiochip_remove(struct gpio_chip *chip)
+@@ -296,3 +298,69 @@ void of_gpiochip_remove(struct gpio_chip
if (chip->of_node)
of_node_put(chip->of_node);
}
+ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe);
+}
+device_initcall(of_gpio_export_init);
-diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
-index 50c4922..aece9f1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -803,7 +803,7 @@ static struct class gpio_class = {
{
unsigned long flags;
int status;
-@@ -843,7 +843,8 @@ int gpiod_export(struct gpio_desc *desc, bool direction_may_change)
+@@ -843,7 +843,8 @@ int gpiod_export(struct gpio_desc *desc,
offset = gpio_chip_hwgpio(desc);
if (desc->chip->names && desc->chip->names[offset])
ioname = desc->chip->names[offset];
EXPORT_SYMBOL_GPL(gpiod_export);
static int match_export(struct device *dev, const void *data)
-diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
-index a5f56a0..70a32ee 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
-@@ -126,6 +126,11 @@ static inline int gpio_export(unsigned gpio, bool direction_may_change)
+@@ -126,6 +126,11 @@ static inline int gpio_export(unsigned g
return gpiod_export(gpio_to_desc(gpio), direction_may_change);
}
static inline int gpio_export_link(struct device *dev, const char *name,
unsigned gpio)
{
-diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
-index 7a8144f..085c31c 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
-@@ -219,6 +219,7 @@ static inline struct gpio_chip *gpiod_to_chip(const struct gpio_desc *desc)
+@@ -219,6 +219,7 @@ static inline struct gpio_chip *gpiod_to
#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS)
int gpiod_export(struct gpio_desc *desc, bool direction_may_change);
int gpiod_export_link(struct device *dev, const char *name,
struct gpio_desc *desc);
-@@ -227,6 +228,13 @@ void gpiod_unexport(struct gpio_desc *desc);
+@@ -227,6 +228,13 @@ void gpiod_unexport(struct gpio_desc *de
#else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */
static inline int gpiod_export(struct gpio_desc *desc,
bool direction_may_change)
{
---
-1.7.10.4
-
-Index: linux-3.14.16/drivers/usb/dwc2/hcd.c
-===================================================================
---- linux-3.14.16.orig/drivers/usb/dwc2/hcd.c 2014-08-08 01:50:59.000000000 +0200
-+++ linux-3.14.16/drivers/usb/dwc2/hcd.c 2014-09-07 21:01:06.524023779 +0200
+--- a/drivers/usb/dwc2/hcd.c
++++ b/drivers/usb/dwc2/hcd.c
@@ -47,6 +47,7 @@
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>
-@@ -2764,6 +2765,8 @@
+@@ -2764,6 +2765,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso
dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n");
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
-@@ -805,10 +805,6 @@ static void split_uimage(struct mtd_info
+@@ -807,10 +807,6 @@ static void split_uimage(struct mtd_info
return;
len = be32_to_cpu(hdr.size) + 0x40;
--- a/drivers/mtd/mtdpart.c
+++ b/drivers/mtd/mtdpart.c
-@@ -793,8 +793,11 @@ static void split_uimage(struct mtd_info
+@@ -795,8 +795,11 @@ static void split_uimage(struct mtd_info
{
struct {
__be32 magic;
} hdr;
size_t len;
-@@ -804,7 +807,11 @@ static void split_uimage(struct mtd_info
+@@ -806,7 +809,11 @@ static void split_uimage(struct mtd_info
if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC))
return;
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
-@@ -146,6 +146,9 @@ EXPORT(__image_cmdline)
+@@ -107,6 +107,9 @@ EXPORT(__image_cmdline)
.fill 0x400
#endif /* CONFIG_IMAGE_CMDLINE_HACK */
+#obj-y += dts/
--- a/arch/mips/ralink/of.c
+++ b/arch/mips/ralink/of.c
-@@ -90,6 +90,8 @@ static int __init early_init_dt_find_mem
+@@ -91,6 +91,8 @@ static int __init early_init_dt_find_mem
return 0;
}
void __init plat_mem_setup(void)
{
set_io_port_base(KSEG1);
-@@ -98,7 +100,7 @@ void __init plat_mem_setup(void)
+@@ -99,7 +101,7 @@ void __init plat_mem_setup(void)
* Load the builtin devicetree. This causes the chosen node to be
* parsed resulting in our memory appearing
*/
- __dt_setup_arch(&__dtb_start);
+ __dt_setup_arch(&__image_dtb);
- of_scan_flat_dt(early_init_dt_find_memory, NULL);
- if (memory_dtb)
+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
+
CPU_SUBTYPE:=vfpv3
MAINTAINER:=Zoltan HERPAI <wigyori@uid0.hu>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
KERNELNAME:="zImage dtbs"
DEFAULT_PACKAGES += uboot-envtools uboot-sunxi kmod-eeprom-sunxi kmod-wdt-sunxi
arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index d4d2763..64fc716 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -19,6 +19,12 @@
};
cpus {
---
-2.0.3
-
arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index 5256ad9..092bf97 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -16,6 +16,16 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 6f25cf5..0b6e610 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -18,6 +18,14 @@
};
cpus {
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 5 +++++
1 file changed, 5 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index c463fd7..d8207b0 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -16,6 +16,11 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 0b6e610..2139e0f 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -381,6 +381,13 @@
uart6_pins_a: uart6@0 {
allwinner,pins = "PI12", "PI13";
allwinner,function = "uart6";
---
-2.0.3
-
2 files changed, 49 insertions(+)
create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino.dts
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 0320303..8e1d636 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
-diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-new file mode 100644
-index 0000000..f5692a3
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -0,0 +1,48 @@
+ };
+ };
+};
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 822a816..911d4e4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -49,6 +49,14 @@
clocks {
#address-cells = <1>;
#size-cells = <1>;
---
-2.0.3
-
2 files changed, 112 insertions(+)
create mode 100644 arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 8e1d636..66d6df3 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -284,6 +284,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
sun4i-a10-pcduino.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a13-olinuxino.dtb \
-diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-new file mode 100644
-index 0000000..66cf0c7
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -0,0 +1,111 @@
+ status = "okay";
+ };
+};
---
-2.0.3
-
arch/arm/boot/dts/sun6i-a31.dtsi | 46 ++++++++++++++++++++++++++++++++--------
1 file changed, 37 insertions(+), 9 deletions(-)
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index 092bf97..93d7bb6 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -83,16 +83,12 @@
};
soc@01c00000 {
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 30 ++++++++++++++++++++----------
1 file changed, 20 insertions(+), 10 deletions(-)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 64fc716..132b261 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -58,34 +58,38 @@
#clock-cells = <1>;
compatible = "allwinner,sun4i-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 30 ++++++++++++++++++++----------
2 files changed, 40 insertions(+), 20 deletions(-)
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index 848baaa..99a5120 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -51,34 +51,38 @@
+@@ -47,34 +47,38 @@
clock-frequency = <0>;
};
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
-@@ -86,7 +90,7 @@
+@@ -82,7 +86,7 @@
clock-output-names = "pll5_ddr", "pll5_other";
};
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
-@@ -100,6 +104,7 @@
+@@ -96,6 +100,7 @@
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
};
axi: axi@01c20054 {
-@@ -107,9 +112,10 @@
+@@ -103,9 +108,10 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
#clock-cells = <1>;
compatible = "allwinner,sun4i-axi-gates-clk";
reg = <0x01c2005c 0x4>;
-@@ -122,9 +128,10 @@
+@@ -118,9 +124,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
reg = <0x01c20060 0x8>;
-@@ -143,9 +150,10 @@
+@@ -139,9 +146,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
reg = <0x01c20068 0x4>;
-@@ -159,6 +167,7 @@
+@@ -155,6 +163,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
-@@ -166,9 +175,10 @@
+@@ -162,9 +171,10 @@
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
#clock-cells = <1>;
compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index d8207b0..b776baa 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -52,34 +52,38 @@
#clock-cells = <1>;
compatible = "allwinner,sun5i-a13-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
---
-2.0.3
-
arch/arm/boot/dts/sun6i-a31.dtsi | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index fc07f70..d3f1995 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -70,17 +70,19 @@
#clock-cells = <1>;
compatible = "allwinner,sun6i-a31-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 25 +++++++++++++++++--------
1 file changed, 17 insertions(+), 8 deletions(-)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 2139e0f..78f562a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -54,11 +54,12 @@
+@@ -62,11 +62,12 @@
#size-cells = <1>;
ranges;
};
osc32k: clk@0 {
-@@ -68,21 +69,23 @@
+@@ -76,21 +77,23 @@
clock-output-names = "osc32k";
};
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll5-clk";
reg = <0x01c20020 0x4>;
-@@ -90,7 +93,7 @@
+@@ -98,7 +101,7 @@
clock-output-names = "pll5_ddr", "pll5_other";
};
#clock-cells = <1>;
compatible = "allwinner,sun4i-pll6-clk";
reg = <0x01c20028 0x4>;
-@@ -103,6 +106,7 @@
+@@ -111,6 +114,7 @@
compatible = "allwinner,sun4i-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
};
axi: axi@01c20054 {
-@@ -110,6 +114,7 @@
+@@ -118,6 +122,7 @@
compatible = "allwinner,sun4i-axi-clk";
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
};
ahb: ahb@01c20054 {
-@@ -117,9 +122,10 @@
+@@ -125,9 +130,10 @@
compatible = "allwinner,sun4i-ahb-clk";
reg = <0x01c20054 0x4>;
clocks = <&axi>;
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-ahb-gates-clk";
reg = <0x01c20060 0x8>;
-@@ -144,9 +150,10 @@
+@@ -152,9 +158,10 @@
compatible = "allwinner,sun4i-apb0-clk";
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb0-gates-clk";
reg = <0x01c20068 0x4>;
-@@ -162,6 +169,7 @@
+@@ -170,6 +177,7 @@
compatible = "allwinner,sun4i-apb1-mux-clk";
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
};
apb1: apb1@01c20058 {
-@@ -169,9 +177,10 @@
+@@ -177,9 +185,10 @@
compatible = "allwinner,sun4i-apb1-clk";
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
#clock-cells = <1>;
compatible = "allwinner,sun7i-a20-apb1-gates-clk";
reg = <0x01c2006c 0x4>;
---
-2.0.3
-
arch/arm/boot/dts/sun6i-a31.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index af6f87c..42f310a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -200,7 +200,7 @@
reg = <0x01c200ac 0x4>;
clocks = <&osc24M>, <&pll6>;
clock-output-names = "spi3";
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 28 ++++++++++++++++++++++++++++
1 file changed, 28 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 78f562a..f6ae357 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -322,6 +322,34 @@
+@@ -330,6 +330,34 @@
};
/*
* Dummy clock used by output clocks
*/
osc24M_32k: clk@1 {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 15 +++++++++++++++
1 file changed, 15 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index f6ae357..fa489fe 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -645,6 +645,21 @@
+@@ -653,6 +653,21 @@
status = "disabled";
};
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index fa489fe..679dc50 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -484,6 +484,32 @@
+@@ -492,6 +492,32 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
timer@01c20c00 {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index f9dcb61..025ce52 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -51,6 +51,18 @@
- pinctrl-0 = <&i2c2_pins_a>;
+@@ -47,6 +47,18 @@
+ pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
};
leds {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 27 ++++++++++++---------------
1 file changed, 12 insertions(+), 15 deletions(-)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-index 5c51cb8..7bf4935 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -19,21 +19,6 @@
};
leds {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 27 +++++++++++--------------
1 file changed, 12 insertions(+), 15 deletions(-)
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index ead3013..b02a796 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -19,21 +19,6 @@
};
leds {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 679dc50..bfc3a95 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -17,7 +17,7 @@
serial0 = &uart0;
serial1 = &uart1;
serial2 = &uart2;
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 132b261..2d623d0 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -315,6 +315,15 @@
spi3_clk: clk@01c200d4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-mod0-clk";
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 9 +++++++++
2 files changed, 18 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index 99a5120..905317e 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -276,6 +276,15 @@
+@@ -272,6 +272,15 @@
clock-output-names = "ir0";
};
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-mod0-clk";
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index b776baa..d196ebc6 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -274,6 +274,15 @@
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
compatible = "allwinner,sun4i-mod0-clk";
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index bfc3a95..822a816 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -305,6 +305,15 @@
+@@ -313,6 +313,15 @@
clock-output-names = "ir1";
};
spi3_clk: clk@01c200d4 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-mod0-clk";
---
-2.0.3
-
drivers/pinctrl/pinctrl-sunxi-pins.h | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-sunxi-pins.h b/drivers/pinctrl/pinctrl-sunxi-pins.h
-index 6fd8d4d..3d60669 100644
--- a/drivers/pinctrl/pinctrl-sunxi-pins.h
+++ b/drivers/pinctrl/pinctrl-sunxi-pins.h
-@@ -1932,27 +1932,27 @@ static const struct sunxi_desc_pin sun5i_a13_pins[] = {
+@@ -1932,27 +1932,27 @@ static const struct sunxi_desc_pin sun5i
SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0,
SUNXI_FUNCTION(0x0, "gpio_in"),
SUNXI_FUNCTION(0x1, "gpio_out"),
/* Hole */
SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0,
SUNXI_FUNCTION(0x0, "gpio_in"),
---
-2.0.3
-
-From 8d2c11e63a3302bbbdac41fc765c881da8a8eb37 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 15 Feb 2014 12:58:17 +0100
-Subject: [PATCH] pinctrl-sunxi: Fix hang on gpio irq
-
-Our irq handler was missing chained_irq_enter / exit calls, causing a
-hard hang as soon as a gpio irq happened.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/pinctrl/pinctrl-sunxi.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
-index f9fabe9..d16da53 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
@@ -13,6 +13,7 @@
#include <linux/irqdomain.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/module.h>
-@@ -670,6 +671,8 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
+@@ -670,6 +671,8 @@ static void sunxi_pinctrl_irq_handler(un
struct sunxi_pinctrl *pctl = irq_get_handler_data(irq);
const unsigned long reg = readl(pctl->membase + IRQ_STATUS_REG);
/* Clear all interrupts */
writel(reg, pctl->membase + IRQ_STATUS_REG);
-@@ -683,6 +686,7 @@ static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
+@@ -683,6 +686,7 @@ static void sunxi_pinctrl_irq_handler(un
}
chained_irq_exit(chip, desc);
}
}
static struct of_device_id sunxi_pinctrl_match[] = {
---
-2.0.3
-
kernel/irq/manage.c | 2 +-
4 files changed, 45 insertions(+), 9 deletions(-)
-diff --git a/include/linux/irq.h b/include/linux/irq.h
-index 7dc1003..0f036fb 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -349,6 +349,8 @@ struct irq_chip {
};
/* This include will go away once we isolated irq_desc usage to core code */
-diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
-index dc04c16..6397df2 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -281,6 +281,19 @@ void unmask_irq(struct irq_desc *desc)
/*
* handle_nested_irq - Handle a nested irq from a irq thread
* @irq: the interrupt number
-@@ -435,6 +448,27 @@ static inline void preflow_handler(struct irq_desc *desc)
+@@ -435,6 +448,27 @@ static inline void preflow_handler(struc
static inline void preflow_handler(struct irq_desc *desc) { }
#endif
/**
* handle_fasteoi_irq - irq handler for transparent controllers
* @irq: the interrupt number
-@@ -448,6 +482,8 @@ static inline void preflow_handler(struct irq_desc *desc) { }
+@@ -448,6 +482,8 @@ static inline void preflow_handler(struc
void
handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
{
raw_spin_lock(&desc->lock);
if (unlikely(irqd_irq_inprogress(&desc->irq_data)))
-@@ -473,18 +509,14 @@ handle_fasteoi_irq(unsigned int irq, struct irq_desc *desc)
+@@ -473,18 +509,14 @@ handle_fasteoi_irq(unsigned int irq, str
preflow_handler(desc);
handle_irq_event(desc);
}
/**
-diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
-index 001fa5b..e98bb56 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
-@@ -73,6 +73,7 @@ extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
+@@ -73,6 +73,7 @@ extern void irq_percpu_enable(struct irq
extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
extern void mask_irq(struct irq_desc *desc);
extern void unmask_irq(struct irq_desc *desc);
extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
-diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
-index d3bf660..7593958 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
-@@ -718,7 +718,7 @@ static void irq_finalize_oneshot(struct irq_desc *desc,
+@@ -713,7 +713,7 @@ again:
if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
irqd_irq_masked(&desc->irq_data))
out_unlock:
raw_spin_unlock_irq(&desc->lock);
---
-2.0.3
-
-From d000f9a5348e6d6c8b620a9c2d0b97c69d6d6153 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Mar 2014 16:47:46 +0100
-Subject: [PATCH] irqchip: sun4i: Fix irq 0 not working
-
-SUN4I_IRQ_VECTOR_REG containing 0 can mean one of 3 things:
-1) no more irqs pending
-2) irq 0 pending
-3) spurious irq
-
-So if we immediately get a reading of 0, check the irq-pending reg
-to differentiate between 2 and 3. We only do this once to avoid
-the extra check in the common case of 1) hapening after having
-read the vector-reg once.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/irqchip/irq-sun4i.c | 18 ++++++++++++++++--
- 1 file changed, 16 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
-index a5438d8..5c25048 100644
--- a/drivers/irqchip/irq-sun4i.c
+++ b/drivers/irqchip/irq-sun4i.c
-@@ -140,10 +140,24 @@ static asmlinkage void __exception_irq_entry sun4i_handle_irq(struct pt_regs *re
+@@ -41,13 +41,11 @@ static asmlinkage void __exception_irq_e
+ static void sun4i_irq_ack(struct irq_data *irqd)
+ {
+ unsigned int irq = irqd_to_hwirq(irqd);
+- unsigned int irq_off = irq % 32;
+- int reg = irq / 32;
+- u32 val;
+
+- val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
+- writel(val | (1 << irq_off),
+- sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
++ if (irq != 0)
++ return; /* Only IRQ 0 / the ENMI needs to be acked */
++
++ writel(BIT(0), sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0));
+ }
+
+ static void sun4i_irq_mask(struct irq_data *irqd)
+@@ -76,16 +74,16 @@ static void sun4i_irq_unmask(struct irq_
+
+ static struct irq_chip sun4i_irq_chip = {
+ .name = "sun4i_irq",
+- .irq_ack = sun4i_irq_ack,
++ .irq_eoi = sun4i_irq_ack,
+ .irq_mask = sun4i_irq_mask,
+ .irq_unmask = sun4i_irq_unmask,
++ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
+ };
+
+ static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hw)
+ {
+- irq_set_chip_and_handler(virq, &sun4i_irq_chip,
+- handle_level_irq);
++ irq_set_chip_and_handler(virq, &sun4i_irq_chip, handle_fasteoi_irq);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+@@ -109,7 +107,7 @@ static int __init sun4i_of_init(struct d
+ writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2));
+
+- /* Mask all the interrupts */
++ /* Unmask all the interrupts, ENABLE_REG(x) is used for masking */
+ writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1));
+ writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2));
+@@ -140,10 +138,24 @@ static asmlinkage void __exception_irq_e
{
u32 irq, hwirq;
- }
+ } while (hwirq != 0);
}
---
-2.0.3
-
-From b37587009473582d9fc080e8b8b99b67b0077a90 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Mar 2014 16:53:23 +0100
-Subject: [PATCH] irqchip: sun4i: Fix a comment about mask register
- initialization
-
-The comment was claiming that we were masking all irqs, while the code actually
-*un*masks all of them.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/irqchip/irq-sun4i.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
-index 5c25048..8a2fbee 100644
---- a/drivers/irqchip/irq-sun4i.c
-+++ b/drivers/irqchip/irq-sun4i.c
-@@ -109,7 +109,7 @@ static int __init sun4i_of_init(struct device_node *node,
- writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(1));
- writel(0, sun4i_irq_base + SUN4I_IRQ_ENABLE_REG(2));
-
-- /* Mask all the interrupts */
-+ /* Unmask all the interrupts, ENABLE_REG(x) is used for masking */
- writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(0));
- writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(1));
- writel(0, sun4i_irq_base + SUN4I_IRQ_MASK_REG(2));
---
-2.0.3
-
-From c8865ee82b74b2d95339370972a0d9bfdbac09cf Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Wed, 12 Mar 2014 17:43:45 +0100
-Subject: [PATCH] irqchip: sun4i: Don't ack IRQs != 0, fix acking of IRQ 0
-
-All IRQs except for IRQ 0 seem to not need acking, so drop acking for them.
-
-The ENMI needs to have the ack done *after* clearing the interrupt source,
-otherwise we will get a spurious interrupt for each real interrupt.
-
-So use the new IRQCHIP_EOI_THREADED flag for this in combination with
-handle_fasteoi_irq. This uses a separate irq_chip struct for IRQ 0,
-since we only want this behavior for IRQ 0.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/irqchip/irq-sun4i.c | 19 ++++++++++++++++---
- 1 file changed, 16 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
-index 8a2fbee..a0ed1ea 100644
---- a/drivers/irqchip/irq-sun4i.c
-+++ b/drivers/irqchip/irq-sun4i.c
-@@ -76,16 +76,29 @@ static void sun4i_irq_unmask(struct irq_data *irqd)
-
- static struct irq_chip sun4i_irq_chip = {
- .name = "sun4i_irq",
-- .irq_ack = sun4i_irq_ack,
- .irq_mask = sun4i_irq_mask,
- .irq_unmask = sun4i_irq_unmask,
- };
-
-+/* IRQ 0 / the ENMI needs a late eoi call */
-+static struct irq_chip sun4i_irq_chip_enmi = {
-+ .name = "sun4i_irq",
-+ .irq_eoi = sun4i_irq_ack,
-+ .irq_mask = sun4i_irq_mask,
-+ .irq_unmask = sun4i_irq_unmask,
-+ .flags = IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED,
-+};
-+
- static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
- {
-- irq_set_chip_and_handler(virq, &sun4i_irq_chip,
-- handle_level_irq);
-+ if (hw == 0)
-+ irq_set_chip_and_handler(virq, &sun4i_irq_chip_enmi,
-+ handle_fasteoi_irq);
-+ else
-+ irq_set_chip_and_handler(virq, &sun4i_irq_chip,
-+ handle_level_irq);
-+
- set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
---
-2.0.3
-
-From f8b4347aa12d7a30aa1d3e5bfcdccece52d17af3 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 13 Mar 2014 19:38:26 +0100
-Subject: [PATCH] irqchip: sun4i: Use handle_fasteoi_irq for all interrupts
-
-Since the sun4i irq chip does not require any action and clears the interrupt
-when the level goes back to inactive, we don't need to mask / unmask for
-non oneshot IRQs, to achieve this we make sun4i_irq_ack a nop for all irqs
-except irq 0 and use handle_fasteoi_irq for all interrupts.
-
-Now there might be a case when the device reactivates the interrupt
-before the RETI. But that does not matter as we run the primary
-interrupt handlers with interrupts disabled.
-
-This also allows us to get rid of needing to use 2 irq_chip structs, this
-means that the IRQCHIP_EOI_THREADED | IRQCHIP_EOI_IF_HANDLED will now influence
-all interrupts rather then just irq 0, but that does not matter as the eoi
-is now a nop anyways for all interrupts but irq 0.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/irqchip/irq-sun4i.c | 18 ++++--------------
- 1 file changed, 4 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
-index a0ed1ea..6a8c88d 100644
---- a/drivers/irqchip/irq-sun4i.c
-+++ b/drivers/irqchip/irq-sun4i.c
-@@ -45,6 +45,9 @@ static void sun4i_irq_ack(struct irq_data *irqd)
- int reg = irq / 32;
- u32 val;
-
-+ if (irq != 0)
-+ return; /* Only IRQ 0 / the ENMI needs to be acked */
-+
- val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
- writel(val | (1 << irq_off),
- sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
-@@ -76,13 +79,6 @@ static void sun4i_irq_unmask(struct irq_data *irqd)
-
- static struct irq_chip sun4i_irq_chip = {
- .name = "sun4i_irq",
-- .irq_mask = sun4i_irq_mask,
-- .irq_unmask = sun4i_irq_unmask,
--};
--
--/* IRQ 0 / the ENMI needs a late eoi call */
--static struct irq_chip sun4i_irq_chip_enmi = {
-- .name = "sun4i_irq",
- .irq_eoi = sun4i_irq_ack,
- .irq_mask = sun4i_irq_mask,
- .irq_unmask = sun4i_irq_unmask,
-@@ -92,13 +88,7 @@ static struct irq_chip sun4i_irq_chip_enmi = {
- static int sun4i_irq_map(struct irq_domain *d, unsigned int virq,
- irq_hw_number_t hw)
- {
-- if (hw == 0)
-- irq_set_chip_and_handler(virq, &sun4i_irq_chip_enmi,
-- handle_fasteoi_irq);
-- else
-- irq_set_chip_and_handler(virq, &sun4i_irq_chip,
-- handle_level_irq);
--
-+ irq_set_chip_and_handler(virq, &sun4i_irq_chip, handle_fasteoi_irq);
- set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
---
-2.0.3
-
-From de39bc31eaa554bd044e6adefacd3da6da5bf6e3 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 13 Mar 2014 20:41:20 +0100
-Subject: [PATCH] irqchip: sun4i: simplify sun4i_irq_ack
-
-Now that we only ack irq 0 the code can be simplified a lot.
-
-Also switch from read / modify / write to a simple write clear:
-1) This is what the android code does (it has a hack for acking irq 0
- in its unmask code doing this)
-2) read / modify / write simply does not make sense for an irq status
- register like this, if the other bits are writeable (and the data sheet says
- they are not) they should be write 1 to clear, since otherwise a read /
- modify / write can race with a device raising an interrupt and then clear
- the pending bit unintentionally
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- drivers/irqchip/irq-sun4i.c | 7 +------
- 1 file changed, 1 insertion(+), 6 deletions(-)
-
-diff --git a/drivers/irqchip/irq-sun4i.c b/drivers/irqchip/irq-sun4i.c
-index 6a8c88d..75615b5 100644
---- a/drivers/irqchip/irq-sun4i.c
-+++ b/drivers/irqchip/irq-sun4i.c
-@@ -41,16 +41,11 @@ static asmlinkage void __exception_irq_entry sun4i_handle_irq(struct pt_regs *re
- static void sun4i_irq_ack(struct irq_data *irqd)
- {
- unsigned int irq = irqd_to_hwirq(irqd);
-- unsigned int irq_off = irq % 32;
-- int reg = irq / 32;
-- u32 val;
-
- if (irq != 0)
- return; /* Only IRQ 0 / the ENMI needs to be acked */
-
-- val = readl(sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
-- writel(val | (1 << irq_off),
-- sun4i_irq_base + SUN4I_IRQ_PENDING_REG(reg));
-+ writel(BIT(0), sun4i_irq_base + SUN4I_IRQ_PENDING_REG(0));
- }
-
- static void sun4i_irq_mask(struct irq_data *irqd)
---
-2.0.3
-
drivers/pinctrl/pinctrl-sunxi.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
-diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
-index d16da53..067e7e10 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
-@@ -531,8 +531,6 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+@@ -531,8 +531,6 @@ static int sunxi_pinctrl_gpio_to_irq(str
if (!desc)
return -EINVAL;
dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
chip->label, offset + chip->base, desc->irqnum);
-@@ -759,6 +757,9 @@ static int sunxi_pinctrl_build_state(struct platform_device *pdev)
+@@ -759,6 +757,9 @@ static int sunxi_pinctrl_build_state(str
struct sunxi_desc_function *func = pin->functions;
while (func->name) {
sunxi_pinctrl_add_function(pctl, func->name);
func++;
}
---
-2.0.3
-
drivers/pinctrl/pinctrl-sunxi.c | 2 ++
1 file changed, 2 insertions(+)
-diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c
-index 067e7e10..d7a41a8 100644
--- a/drivers/pinctrl/pinctrl-sunxi.c
+++ b/drivers/pinctrl/pinctrl-sunxi.c
-@@ -661,6 +661,8 @@ static struct irq_chip sunxi_pinctrl_irq_chip = {
+@@ -661,6 +661,8 @@ static struct irq_chip sunxi_pinctrl_irq
.irq_mask_ack = sunxi_pinctrl_irq_mask_ack,
.irq_unmask = sunxi_pinctrl_irq_unmask,
.irq_set_type = sunxi_pinctrl_irq_set_type,
};
static void sunxi_pinctrl_irq_handler(unsigned irq, struct irq_desc *desc)
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 0c57ac5..30b9aba 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -572,7 +572,7 @@
+@@ -424,7 +424,7 @@
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
#size-cells = <0>;
#gpio-cells = <3>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 54 +++++++++++++++++------------------
5 files changed, 110 insertions(+), 110 deletions(-)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 2d623d0..f6f41d6 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -60,7 +60,7 @@
reg = <0x01c200d4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi3";
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index 905317e..df90a29 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -53,7 +53,7 @@
+@@ -49,7 +49,7 @@
osc24M: clk@01c20050 {
#clock-cells = <0>;
reg = <0x01c20050 0x4>;
clock-frequency = <24000000>;
clock-output-names = "osc24M";
-@@ -68,7 +68,7 @@
+@@ -64,7 +64,7 @@
pll1: clk@01c20000 {
#clock-cells = <0>;
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll1";
-@@ -76,7 +76,7 @@
+@@ -72,7 +72,7 @@
pll4: clk@01c20018 {
#clock-cells = <0>;
reg = <0x01c20018 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll4";
-@@ -84,7 +84,7 @@
+@@ -80,7 +80,7 @@
pll5: clk@01c20020 {
#clock-cells = <1>;
reg = <0x01c20020 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll5_ddr", "pll5_other";
-@@ -92,7 +92,7 @@
+@@ -88,7 +88,7 @@
pll6: clk@01c20028 {
#clock-cells = <1>;
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
clock-output-names = "pll6_sata", "pll6_other", "pll6";
-@@ -101,7 +101,7 @@
+@@ -97,7 +97,7 @@
/* dummy is 200M */
cpu: cpu@01c20054 {
#clock-cells = <0>;
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>, <&dummy>;
clock-output-names = "cpu";
-@@ -109,7 +109,7 @@
+@@ -105,7 +105,7 @@
axi: axi@01c20054 {
#clock-cells = <0>;
reg = <0x01c20054 0x4>;
clocks = <&cpu>;
clock-output-names = "axi";
-@@ -117,7 +117,7 @@
+@@ -113,7 +113,7 @@
axi_gates: clk@01c2005c {
#clock-cells = <1>;
reg = <0x01c2005c 0x4>;
clocks = <&axi>;
clock-output-names = "axi_dram";
-@@ -125,7 +125,7 @@
+@@ -121,7 +121,7 @@
ahb: ahb@01c20054 {
#clock-cells = <0>;
reg = <0x01c20054 0x4>;
clocks = <&axi>;
clock-output-names = "ahb";
-@@ -147,7 +147,7 @@
+@@ -143,7 +143,7 @@
apb0: apb0@01c20054 {
#clock-cells = <0>;
reg = <0x01c20054 0x4>;
clocks = <&ahb>;
clock-output-names = "apb0";
-@@ -164,7 +164,7 @@
+@@ -160,7 +160,7 @@
apb1_mux: apb1_mux@01c20058 {
#clock-cells = <0>;
reg = <0x01c20058 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
clock-output-names = "apb1_mux";
-@@ -172,7 +172,7 @@
+@@ -168,7 +168,7 @@
apb1: apb1@01c20058 {
#clock-cells = <0>;
reg = <0x01c20058 0x4>;
clocks = <&apb1_mux>;
clock-output-names = "apb1";
-@@ -190,7 +190,7 @@
+@@ -186,7 +186,7 @@
nand_clk: clk@01c20080 {
#clock-cells = <0>;
reg = <0x01c20080 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "nand";
-@@ -198,7 +198,7 @@
+@@ -194,7 +194,7 @@
ms_clk: clk@01c20084 {
#clock-cells = <0>;
reg = <0x01c20084 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ms";
-@@ -206,7 +206,7 @@
+@@ -202,7 +202,7 @@
mmc0_clk: clk@01c20088 {
#clock-cells = <0>;
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc0";
-@@ -214,7 +214,7 @@
+@@ -210,7 +210,7 @@
mmc1_clk: clk@01c2008c {
#clock-cells = <0>;
reg = <0x01c2008c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc1";
-@@ -222,7 +222,7 @@
+@@ -218,7 +218,7 @@
mmc2_clk: clk@01c20090 {
#clock-cells = <0>;
reg = <0x01c20090 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mmc2";
-@@ -230,7 +230,7 @@
+@@ -226,7 +226,7 @@
ts_clk: clk@01c20098 {
#clock-cells = <0>;
reg = <0x01c20098 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ts";
-@@ -238,7 +238,7 @@
+@@ -234,7 +234,7 @@
ss_clk: clk@01c2009c {
#clock-cells = <0>;
reg = <0x01c2009c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ss";
-@@ -246,7 +246,7 @@
+@@ -242,7 +242,7 @@
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
reg = <0x01c200a0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi0";
-@@ -254,7 +254,7 @@
+@@ -250,7 +250,7 @@
spi1_clk: clk@01c200a4 {
#clock-cells = <0>;
reg = <0x01c200a4 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi1";
-@@ -262,7 +262,7 @@
+@@ -258,7 +258,7 @@
spi2_clk: clk@01c200a8 {
#clock-cells = <0>;
reg = <0x01c200a8 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "spi2";
-@@ -270,7 +270,7 @@
+@@ -266,7 +266,7 @@
ir0_clk: clk@01c200b0 {
#clock-cells = <0>;
reg = <0x01c200b0 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "ir0";
-@@ -287,7 +287,7 @@
+@@ -283,7 +283,7 @@
mbus_clk: clk@01c2015c {
#clock-cells = <0>;
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mbus";
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index d196ebc6..24cd86cb 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -54,7 +54,7 @@
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
clock-output-names = "mbus";
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index d3f1995..af6f87c 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -95,7 +95,7 @@
reg = <0x01c20058 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
clock-output-names = "apb2_mux";
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 911d4e4..d00fbf8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -64,7 +64,7 @@
reg = <0x01c2015c 0x4>;
clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
clock-output-names = "mbus";
---
-2.0.3
-
1 file changed, 75 insertions(+)
create mode 100644 arch/arm/boot/dts/sunxi-common-regulators.dtsi
-diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
-new file mode 100644
-index 0000000..18eeac0
--- /dev/null
+++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi
@@ -0,0 +1,75 @@
+ status = "disabled";
+ };
+};
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index d00fbf8..0f0ee58 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -401,6 +401,28 @@
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
-@@ -417,6 +439,28 @@
+@@ -415,6 +437,28 @@
+ status = "disabled";
+ #address-cells = <1>;
#size-cells = <0>;
- };
-
++ };
++
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
-+ };
-+
+ };
+
pio: pinctrl@01c20800 {
- compatible = "allwinner,sun7i-a20-pinctrl";
- reg = <0x01c20800 0x400>;
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 44 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 44 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index f6f41d6..157bc09 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -339,6 +339,28 @@
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
-@@ -355,6 +377,28 @@
+@@ -353,6 +375,28 @@
+ status = "disabled";
+ #address-cells = <1>;
#size-cells = <0>;
- };
-
++ };
++
+ spi2: spi@01c17000 {
+ compatible = "allwinner,sun4i-a10-spi";
+ reg = <0x01c17000 0x1000>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
-+ };
-+
+ };
+
intc: interrupt-controller@01c20400 {
- compatible = "allwinner,sun4i-ic";
- reg = <0x01c20400 0x400>;
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index 24cd86cb..7102d12 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -298,6 +298,39 @@
intc: interrupt-controller@01c20400 {
compatible = "allwinner,sun4i-ic";
reg = <0x01c20400 0x400>;
---
-2.0.3
-
create mode 100644 Documentation/devicetree/bindings/spi/spi-sun6i.txt
create mode 100644 drivers/spi/spi-sun6i.c
-diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
-new file mode 100644
-index 0000000..21de73d
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt
@@ -0,0 +1,24 @@
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 21>;
+};
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 581ee2a..58530d3 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -446,6 +446,12 @@ config SPI_SIRF
+@@ -455,6 +455,12 @@ config SPI_SIRF
help
SPI driver for CSR SiRFprimaII SoCs
config SPI_MXS
tristate "Freescale MXS SPI controller"
depends on ARCH_MXS
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 95af48d..13b6ccf9 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
+@@ -71,6 +71,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hsp
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
obj-$(CONFIG_SPI_TEGRA20_SLINK) += spi-tegra20-slink.o
-diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c
-new file mode 100644
-index 0000000..94d38d0
--- /dev/null
+++ b/drivers/spi/spi-sun6i.c
@@ -0,0 +1,483 @@
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A31 SPI controller driver");
+MODULE_LICENSE("GPL");
---
-2.0.3
-
create mode 100644 Documentation/devicetree/bindings/spi/spi-sun4i.txt
create mode 100644 drivers/spi/spi-sun4i.c
-diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
-new file mode 100644
-index 0000000..de827f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt
@@ -0,0 +1,24 @@
+ #address-cells = <1>;
+ #size-cells = <0>;
+};
-diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
-index 58530d3..78adfae 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
-@@ -446,6 +446,12 @@ config SPI_SIRF
+@@ -455,6 +455,12 @@ config SPI_SIRF
help
SPI driver for CSR SiRFprimaII SoCs
config SPI_SUN6I
tristate "Allwinner A31 SPI controller"
depends on ARCH_SUNXI || COMPILE_TEST
-diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
-index 13b6ccf9..65f4993 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
-@@ -70,6 +70,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hspi.o
+@@ -71,6 +71,7 @@ obj-$(CONFIG_SPI_SH_HSPI) += spi-sh-hsp
obj-$(CONFIG_SPI_SH_MSIOF) += spi-sh-msiof.o
obj-$(CONFIG_SPI_SH_SCI) += spi-sh-sci.o
obj-$(CONFIG_SPI_SIRF) += spi-sirf.o
obj-$(CONFIG_SPI_SUN6I) += spi-sun6i.o
obj-$(CONFIG_SPI_TEGRA114) += spi-tegra114.o
obj-$(CONFIG_SPI_TEGRA20_SFLASH) += spi-tegra20-sflash.o
-diff --git a/drivers/spi/spi-sun4i.c b/drivers/spi/spi-sun4i.c
-new file mode 100644
-index 0000000..3f82705
--- /dev/null
+++ b/drivers/spi/spi-sun4i.c
@@ -0,0 +1,477 @@
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Allwinner A1X/A20 SPI controller driver");
+MODULE_LICENSE("GPL");
---
-2.0.3
-
arch/arm/configs/sunxi_defconfig | 3 +++
1 file changed, 3 insertions(+)
-diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
-index 3e2259b..b5df4a5 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -24,6 +24,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 0f0ee58..6161fd8 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -571,6 +571,20 @@
};
timer@01c20c00 {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index b02a796..9d98316 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -18,7 +18,24 @@
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
3 files changed, 22 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
-index cbd2e13..d6ec839 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -35,6 +35,10 @@
pinctrl@01c20800 {
emac_power_pin_a1000: emac_power_pin@0 {
allwinner,pins = "PH15";
-diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-index b139ee6..20407ac 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -12,6 +12,7 @@
+ status = "okay";
+ };
};
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 157bc09..18e09b41 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -388,6 +388,14 @@
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
4 files changed, 47 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-index 7bf4935..4bed115 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -13,12 +13,18 @@
+ status = "okay";
+ };
};
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index 025ce52..ef5fed8 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -13,13 +13,26 @@
led_pins_cubietruck: led_pins@0 {
allwinner,pins = "PH7", "PH11", "PH20", "PH21";
allwinner,function = "gpio_out";
-@@ -90,4 +103,10 @@
+@@ -86,4 +99,10 @@
gpios = <&pio 7 7 0>;
};
};
+ status = "okay";
+ };
};
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index 9d98316..c9b0f37 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -13,6 +13,7 @@
+ status = "okay";
+ };
};
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 6161fd8..864b7c6 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -450,6 +450,14 @@
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
---
-2.0.3
-
drivers/watchdog/sunxi_wdt.c | 1 +
2 files changed, 5 insertions(+), 3 deletions(-)
-diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
-index e39cb26..6e8c937 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -2,13 +2,14 @@ Allwinner SoCs Watchdog timer
+ compatible = "allwinner,sun4i-a10-wdt";
reg = <0x01c20c90 0x10>;
};
-diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c
-index 76332d89..7c8923d 100644
--- a/drivers/watchdog/sunxi_wdt.c
+++ b/drivers/watchdog/sunxi_wdt.c
-@@ -206,6 +206,7 @@ static void sunxi_wdt_shutdown(struct platform_device *pdev)
+@@ -206,6 +206,7 @@ static void sunxi_wdt_shutdown(struct pl
static const struct of_device_id sunxi_wdt_dt_ids[] = {
{ .compatible = "allwinner,sun4i-wdt" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 3ce650b..4b90a18 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -597,7 +597,7 @@
+@@ -487,7 +487,7 @@
};
wdt: watchdog@01c20c90 {
reg = <0x01c20c90 0x10>;
};
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index 1795c26..45300a6 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
-@@ -508,7 +508,7 @@
+@@ -392,7 +392,7 @@
};
wdt: watchdog@01c20c90 {
reg = <0x01c20c90 0x10>;
};
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index 8bc8e14..280ffee 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -454,7 +454,7 @@
+@@ -393,7 +393,7 @@
};
wdt: watchdog@01c20c90 {
reg = <0x01c20c90 0x10>;
};
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index e4267bd..8441733 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -289,7 +289,7 @@
reg = <0x01c20ca0 0x20>;
};
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 30b9aba..4981f5e 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -725,7 +725,7 @@
+@@ -608,7 +608,7 @@
};
wdt: watchdog@01c20c90 {
reg = <0x01c20c90 0x10>;
};
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 18e09b41..27dc6ee 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -377,6 +377,38 @@
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 32 ++++++++++++++++++++++++++++++++
2 files changed, 64 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index b2cb5dc..f34e0d8 100644
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index 7102d12..0e9c239 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -320,6 +320,38 @@
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 864b7c6..4cc2f5f 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -439,6 +439,38 @@
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 40 +++++++++++++++++++++++++++++++
1 file changed, 40 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-index 6692d336..d7c17e4 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -13,6 +13,7 @@
};
uart0: serial@01c28000 {
-@@ -62,4 +92,14 @@
- enable-active-high;
- gpio = <&pio 7 19 0>;
+@@ -66,4 +96,14 @@
+ gpio = <&pio 7 19 0>;
+ };
};
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
};
---
-2.0.3
-
-From dbf6ffa0b3832d91c2509e6753f485cedc791051 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 11 Jan 2014 05:15:06 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to mini-xplus dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 31 ++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-index 70b3323..dd84a9e3 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -13,16 +13,47 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
-From 528808ae38fee761be9f3451f51b457cb56d33ee Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 17 Feb 2014 20:41:04 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to pcduino.dts
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-index f5692a3..255b47e 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -12,6 +12,7 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
-From 58b778ce8cbc6fdb1fda5a6998fdd114a2b77cc9 Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Wed, 18 Sep 2013 22:45:06 +0200
-Subject: [PATCH] ARM: sun4i: dt: Add USB host nodes to cubieboard dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-index 20407ac..4684cbe 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -34,11 +34,33 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-index a4ba5ff..7a9187b 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -13,12 +13,26 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
-From a3396ca280066e9a1ee74b36f5e376c945382bff Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 11 Jan 2014 05:21:43 +0100
-Subject: [PATCH] ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-micro
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 27 +++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-index fe2ce0a..11169d5 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -14,12 +14,26 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index ef5fed8..cb25d3c 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -20,11 +20,33 @@
pinctrl@01c20800 {
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
allwinner,pins = "PH12";
-@@ -109,4 +131,12 @@
+@@ -105,4 +127,12 @@
gpio = <&pio 7 12 0>;
status = "okay";
};
+ status = "okay";
+ };
};
---
-2.0.3
-
-From 8ce7da7026a24fe522abb3d7798cea12358946c0 Mon Sep 17 00:00:00 2001
-From: Roman Byshko <rbyshko@gmail.com>
-Date: Thu, 19 Sep 2013 21:29:45 +0200
-Subject: [PATCH] ARM: sun7i: dt: Add USB host nodes to cubieboard2 dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Roman Byshko <rbyshko@gmail.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 30 +++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-index 4bed115..68de89f 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -20,11 +20,33 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
-From e0e1a55781f7ba89a776456c8764782165e5efcc Mon Sep 17 00:00:00 2001
-From: Zalan Blenessy <zalan.blenessy@gmail.com>
-Date: Sun, 22 Dec 2013 17:08:10 +0100
-Subject: [PATCH] ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dts
-
-Add nodes for the usb-phy and ehci- and ohci-usb-host controllers.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 30 +++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index c9b0f37..eeadf76 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -31,6 +31,20 @@
+ status = "okay";
+ };
};
---
-2.0.3
-
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
create mode 100644 drivers/input/touchscreen/sun4i-ts.c
-diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
-new file mode 100644
-index 0000000..e45927e
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
@@ -0,0 +1,15 @@
+ reg = <0x01c25000 0x100>;
+ interrupts = <29>;
+ };
-diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
-index 07e9e82..f4c5ca3 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -906,6 +906,16 @@ config TOUCHSCREEN_STMPE
config TOUCHSCREEN_SUR40
tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
depends on USB
-diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
-index 62801f2..c8f7375 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
-@@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
+@@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixc
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
obj-$(CONFIG_TOUCHSCREEN_SUR40) += sur40.o
obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC) += ti_am335x_tsc.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
-diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
-new file mode 100644
-index 0000000..5945219
--- /dev/null
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -0,0 +1,262 @@
+MODULE_DESCRIPTION("Allwinner sun4i resistive touchscreen controller driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
---
-2.0.3
-
drivers/input/touchscreen/sun4i-ts.c | 140 ++++++++++++++++-----
2 files changed, 114 insertions(+), 31 deletions(-)
-diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
-index e45927e..6bac67b 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt
@@ -6,10 +6,15 @@ Required properties:
interrupts = <29>;
+ allwinner,ts-attached;
};
-diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
-index 5945219..16cbb01 100644
--- a/drivers/input/touchscreen/sun4i-ts.c
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -3,6 +3,9 @@
if (reg_val & FIFO_DATA_PENDING) {
x = readl(ts->base + TP_DATA);
-@@ -139,6 +141,20 @@ static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
+@@ -139,6 +141,20 @@ static irqreturn_t sun4i_ts_irq(int irq,
input_report_key(ts->input, BTN_TOUCH, 0);
input_sync(ts->input);
}
writel(reg_val, ts->base + TP_INT_FIFOS);
-@@ -149,9 +165,9 @@ static int sun4i_ts_open(struct input_dev *dev)
+@@ -149,9 +165,9 @@ static int sun4i_ts_open(struct input_de
{
struct sun4i_ts_data *ts = input_get_drvdata(dev);
return 0;
}
-@@ -160,15 +176,48 @@ static void sun4i_ts_close(struct input_dev *dev)
+@@ -160,15 +176,48 @@ static void sun4i_ts_close(struct input_
{
struct sun4i_ts_data *ts = input_get_drvdata(dev);
ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
if (!ts)
-@@ -176,24 +225,27 @@ static int sun4i_ts_probe(struct platform_device *pdev)
+@@ -176,24 +225,27 @@ static int sun4i_ts_probe(struct platfor
ts->dev = dev;
ts->ignore_fifo_data = true;
--
++ ts->temp_data = -1;
+
- ts->input = devm_input_allocate_device(dev);
- if (!ts->input)
- return -ENOMEM;
- input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
- input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
- input_set_drvdata(ts->input, ts);
-+ ts->temp_data = -1;
-+
+ if (ts_attached) {
+ ts->input = devm_input_allocate_device(dev);
+ if (!ts->input)
ts->base = devm_ioremap_resource(dev,
platform_get_resource(pdev, IORESOURCE_MEM, 0));
-@@ -232,14 +284,39 @@ static int sun4i_ts_probe(struct platform_device *pdev)
+@@ -232,14 +284,39 @@ static int sun4i_ts_probe(struct platfor
writel(STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1) | TP_MODE_EN(1),
ts->base + TP_CTRL1);
static const struct of_device_id sun4i_ts_of_match[] = {
{ .compatible = "allwinner,sun4i-ts", },
{ /* sentinel */ }
-@@ -253,6 +330,7 @@ static struct platform_driver sun4i_ts_driver = {
+@@ -253,6 +330,7 @@ static struct platform_driver sun4i_ts_d
.of_match_table = of_match_ptr(sun4i_ts_of_match),
},
.probe = sun4i_ts_probe,
};
module_platform_driver(sun4i_ts_driver);
---
-2.0.3
-
create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c
-diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
-new file mode 100644
-index 0000000..7801264
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt
@@ -0,0 +1,22 @@
+ linux,chan0-keycodes = <KEY_VOLUMEUP KEY_VOLUMEDOWN
+ KEY_MENU KEY_ENTER KEY_HOME>;
+ };
-diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
-index a673c9f..d8a51cd 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -544,6 +544,16 @@ config KEYBOARD_STMPE
config KEYBOARD_DAVINCI
tristate "TI DaVinci Key Scan"
depends on ARCH_DAVINCI_DM365
-diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
-index a699b61..f3265bd 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o
+@@ -50,6 +50,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_k
obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o
obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o
obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o
obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o
obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o
obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o
-diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c
-new file mode 100644
-index 0000000..5c55e17
--- /dev/null
+++ b/drivers/input/keyboard/sun4i-lradc-keys.c
@@ -0,0 +1,243 @@
+MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 7014518..3ce650b 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -607,6 +607,13 @@
+@@ -549,6 +549,13 @@
interrupts = <24>;
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-sid";
reg = <0x01c23800 0x10>;
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 7 +++++++
4 files changed, 30 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
-index 5bc25c7..93c6778 100644
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index 8ba1ed7..1795c26 100644
-diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-index 177196c..c2c455d 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -14,6 +14,7 @@
/ {
model = "Olimex A13-Olinuxino";
-@@ -64,6 +65,13 @@
+@@ -49,6 +50,13 @@
};
};
uart1: serial@01c28400 {
pinctrl-names = "default";
pinctrl-0 = <&uart1_pins_b>;
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index 6fc84a4..8bc8e14 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
-@@ -458,6 +458,13 @@
+@@ -429,6 +429,13 @@
reg = <0x01c20c90 0x10>;
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-sid";
reg = <0x01c23800 0x10>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
2 files changed, 16 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index 822cbe2..15f1f3f 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -14,6 +14,7 @@
/ {
model = "Olimex A20-Olinuxino Micro";
-@@ -96,6 +97,14 @@
+@@ -73,6 +74,14 @@
};
};
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 1d9b314..0c57ac5 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -735,6 +735,13 @@
+@@ -670,6 +670,13 @@
interrupts = <0 24 4>;
};
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
---
-2.0.3
-
include/linux/reset.h | 4 ++++
2 files changed, 34 insertions(+), 9 deletions(-)
-diff --git a/drivers/reset/core.c b/drivers/reset/core.c
-index d1b6089..4f3dda7 100644
--- a/drivers/reset/core.c
+++ b/drivers/reset/core.c
-@@ -127,15 +127,16 @@ int reset_control_deassert(struct reset_control *rstc)
+@@ -127,15 +127,16 @@ int reset_control_deassert(struct reset_
EXPORT_SYMBOL_GPL(reset_control_deassert);
/**
{
struct reset_control *rstc = ERR_PTR(-EPROBE_DEFER);
struct reset_controller_dev *r, *rcdev;
-@@ -144,13 +145,10 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)
+@@ -144,13 +145,10 @@ struct reset_control *reset_control_get(
int rstc_id;
int ret;
index, &args);
if (ret)
return ERR_PTR(ret);
-@@ -185,12 +183,35 @@ struct reset_control *reset_control_get(struct device *dev, const char *id)
+@@ -185,12 +183,35 @@ struct reset_control *reset_control_get(
return ERR_PTR(-ENOMEM);
}
EXPORT_SYMBOL_GPL(reset_control_get);
/**
-diff --git a/include/linux/reset.h b/include/linux/reset.h
-index 6082247..a398025 100644
--- a/include/linux/reset.h
+++ b/include/linux/reset.h
@@ -1,6 +1,8 @@
struct device;
struct reset_control;
-@@ -8,6 +10,8 @@ int reset_control_reset(struct reset_control *rstc);
+@@ -8,6 +10,8 @@ int reset_control_reset(struct reset_con
int reset_control_assert(struct reset_control *rstc);
int reset_control_deassert(struct reset_control *rstc);
struct reset_control *reset_control_get(struct device *dev, const char *id);
void reset_control_put(struct reset_control *rstc);
struct reset_control *devm_reset_control_get(struct device *dev, const char *id);
---
-2.0.3
-
drivers/clocksource/timer-sun5i.c | 6 ++++++
2 files changed, 10 insertions(+)
-diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
-index 7c26154..27cfc7d 100644
--- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
+++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt
@@ -9,6 +9,9 @@ Required properties:
clocks = <&ahb1_gates 19>;
+ resets = <&ahb1rst 19>;
};
-diff --git a/drivers/clocksource/timer-sun5i.c b/drivers/clocksource/timer-sun5i.c
-index deebcd6..0226844 100644
--- a/drivers/clocksource/timer-sun5i.c
+++ b/drivers/clocksource/timer-sun5i.c
@@ -16,6 +16,7 @@
unsigned long rate;
struct clk *clk;
int ret, irq;
-@@ -162,6 +164,10 @@ static void __init sun5i_timer_init(struct device_node *node)
+@@ -162,6 +164,10 @@ static void __init sun5i_timer_init(stru
clk_prepare_enable(clk);
rate = clk_get_rate(clk);
writel(~0, timer_base + TIMER_INTVAL_LO_REG(1));
writel(TIMER_CTL_ENABLE | TIMER_CTL_RELOAD,
timer_base + TIMER_CTL_REG(1));
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index abb6c5a..0ed9794 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -51,6 +51,8 @@ static void __init sun4i_osc_clk_setup(struct device_node *node)
+@@ -51,6 +51,8 @@ static void __init sun4i_osc_clk_setup(s
if (!gate)
goto err_free_fixed;
/* set up gate and fixed rate properties */
gate->reg = of_iomap(node, 0);
gate->bit_idx = SUNXI_OSC24M_GATE;
-@@ -601,6 +603,8 @@ static void __init sunxi_mux_clk_setup(struct device_node *node,
+@@ -601,6 +603,8 @@ static void __init sunxi_mux_clk_setup(s
(parents[i] = of_clk_get_parent_name(node, i)) != NULL)
i++;
clk = clk_register_mux(NULL, clk_name, parents, i,
CLK_SET_RATE_NO_REPARENT, reg,
data->shift, SUNXI_MUX_GATE_WIDTH,
-@@ -660,6 +664,8 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
+@@ -660,6 +664,8 @@ static void __init sunxi_divider_clk_set
clk_parent = of_clk_get_parent_name(node, 0);
clk = clk_register_divider(NULL, clk_name, clk_parent, 0,
reg, data->shift, data->width,
data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0,
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 0ed9794..7a2ed98 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -389,6 +389,7 @@ struct factors_data {
};
static struct clk_factors_config sun4i_pll1_config = {
-@@ -457,6 +458,14 @@ static const struct factors_data sun4i_pll5_data __initconst = {
+@@ -457,6 +458,14 @@ static const struct factors_data sun4i_p
.enable = 31,
.table = &sun4i_pll5_config,
.getter = sun4i_get_pll5_factors,
};
static const struct factors_data sun4i_apb1_data __initconst = {
-@@ -499,14 +508,14 @@ static struct clk * __init sunxi_factors_clk_setup(struct device_node *node,
+@@ -499,14 +508,14 @@ static struct clk * __init sunxi_factors
(parents[i] = of_clk_get_parent_name(node, i)) != NULL)
i++;
factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL);
if (!factors)
-@@ -838,7 +847,7 @@ static const struct divs_data pll5_divs_data __initconst = {
+@@ -838,7 +847,7 @@ static const struct divs_data pll5_divs_
};
static const struct divs_data pll6_divs_data __initconst = {
.div = {
{ .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */
{ .fixed = 2 }, /* P, other */
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 71 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 71 insertions(+)
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 736fb60..23beb6e 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -18,6 +18,7 @@
#include "clk-factors.h"
-@@ -688,6 +689,59 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
+@@ -688,6 +689,59 @@ static void __init sunxi_divider_clk_set
/**
* sunxi_gates_clk_setup() - Setup function for leaf gates on clocks
*/
-@@ -695,6 +749,7 @@ static void __init sunxi_divider_clk_setup(struct device_node *node,
+@@ -695,6 +749,7 @@ static void __init sunxi_divider_clk_set
struct gates_data {
DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE);
};
static const struct gates_data sun4i_axi_gates_data __initconst = {
-@@ -765,6 +820,7 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
+@@ -765,6 +820,7 @@ static void __init sunxi_gates_clk_setup
struct gates_data *data)
{
struct clk_onecell_data *clk_data;
const char *clk_parent;
const char *clk_name;
void *reg;
-@@ -808,6 +864,21 @@ static void __init sunxi_gates_clk_setup(struct device_node *node,
+@@ -808,6 +864,21 @@ static void __init sunxi_gates_clk_setup
clk_data->clk_num = i;
of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
}
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 7a2ed98..736fb60 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -869,7 +869,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
+@@ -940,7 +940,7 @@ static void __init sunxi_divs_clk_setup(
struct divs_data *data)
{
struct clk_onecell_data *clk_data;
const char *clk_name;
struct clk **clks, *pclk;
struct clk_hw *gate_hw, *rate_hw;
-@@ -883,6 +883,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
+@@ -954,6 +954,7 @@ static void __init sunxi_divs_clk_setup(
/* Set up factor clock that we will be dividing */
pclk = sunxi_factors_clk_setup(node, data->factors);
reg = of_iomap(node, 0);
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 12 ++++++++++++
2 files changed, 17 insertions(+)
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index 0cf679b..ca2b692 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -37,6 +37,8 @@ Required properties:
Required properties for all clocks:
- reg : shall be the control register address for the clock.
-@@ -50,6 +52,9 @@ Required properties for all clocks:
- If the clock module only has one output, the name shall be the
- module name.
+@@ -49,6 +51,9 @@ Required properties for all clocks:
+ Additionally, "allwinner,*-gates-clk" clocks require:
+ - clock-output-names : the corresponding gate names that the clock controls
+And "allwinner,*-usb-clk" clocks also require:
+- reset-cells : shall be set to 1
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. This ID is the
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 23beb6e..a779c31 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -816,6 +816,16 @@ static const struct gates_data sun7i_a20_apb1_gates_data __initconst = {
+@@ -816,6 +816,16 @@ static const struct gates_data sun7i_a20
.mask = { 0xff80ff },
};
static void __init sunxi_gates_clk_setup(struct device_node *node,
struct gates_data *data)
{
-@@ -1107,6 +1117,8 @@ static const struct of_device_id clk_gates_match[] __initconst = {
+@@ -1107,6 +1117,8 @@ static const struct of_device_id clk_gat
{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
{}
};
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 45 +++++++++++++++++++++++
2 files changed, 46 insertions(+)
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index ca2b692..c37c764 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -11,6 +11,7 @@ Required properties:
"allwinner,sun4i-cpu-clk" - for the CPU multiplexer clock
"allwinner,sun4i-axi-clk" - for the AXI clock
"allwinner,sun4i-axi-gates-clk" - for the AXI gates
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index a779c31..d4cf297 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -252,7 +252,38 @@ static void sun4i_get_pll5_factors(u32 *freq, u32 parent_rate,
+@@ -252,7 +252,38 @@ static void sun4i_get_pll5_factors(u32 *
*n = DIV_ROUND_UP(div, (*k+1));
}
+ /* we were called to round the frequency, we can now return */
+ if (n == NULL)
+ return;
-+
+
+ *k = div / 32;
+ if (*k > 3)
+ *k = 3;
-
++
+ *n = DIV_ROUND_UP(div, (*k+1));
+}
/**
* sun4i_get_apb1_factors() - calculates m, p factors for APB1
-@@ -420,6 +451,13 @@ static struct clk_factors_config sun4i_pll5_config = {
+@@ -420,6 +451,13 @@ static struct clk_factors_config sun4i_p
.kwidth = 2,
};
static struct clk_factors_config sun4i_apb1_config = {
.mshift = 0,
.mwidth = 5,
-@@ -469,6 +507,12 @@ static const struct factors_data sun4i_pll6_data __initconst = {
+@@ -469,6 +507,12 @@ static const struct factors_data sun4i_p
.name = "pll6",
};
static const struct factors_data sun4i_apb1_data __initconst = {
.table = &sun4i_apb1_config,
.getter = sun4i_get_apb1_factors,
-@@ -1069,6 +1113,7 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
+@@ -1069,6 +1113,7 @@ free_clkdata:
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun4i-pll1-clk", .data = &sun4i_pll1_data,},
{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
{.compatible = "allwinner,sun4i-apb1-clk", .data = &sun4i_apb1_data,},
{.compatible = "allwinner,sun4i-mod0-clk", .data = &sun4i_mod0_data,},
{.compatible = "allwinner,sun7i-a20-out-clk", .data = &sun7i_a20_out_data,},
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 96 +++++++++++++++++++++++
2 files changed, 126 insertions(+)
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index c37c764..256a908 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -38,6 +38,7 @@ Required properties:
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
"allwinner,sun5i-a13-usb-clk" - for usb gates + resets on A13
-@@ -56,6 +57,9 @@ Required properties for all clocks:
+@@ -55,6 +56,9 @@ Additionally, "allwinner,*-gates-clk" cl
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
Clock consumers should specify the desired clocks they use with a
"clocks" phandle cell. Consumers that are using a gated clock should
provide an additional ID in their clock property. This ID is the
-@@ -102,3 +106,29 @@ mmc0_clk: clk@01c20088 {
- clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0";
+@@ -82,3 +86,29 @@ cpu: cpu@01c20054 {
+ reg = <0x01c20054 0x4>;
+ clocks = <&osc32k>, <&osc24M>, <&pll1>;
};
+
+mii_phy_tx_clk: clk@2 {
+ clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+ clock-output-names = "gmac";
+};
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index d4cf297..335c987 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -411,6 +411,102 @@ static void sun7i_a20_get_out_factors(u32 *freq, u32 parent_rate,
+@@ -411,6 +411,102 @@ static void sun7i_a20_get_out_factors(u3
/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 30 +++++++++----------
2 files changed, 33 insertions(+), 33 deletions(-)
-diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
-index 256a908..a5160d8 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
-@@ -6,37 +6,37 @@ This binding uses the common clock binding[1].
+@@ -6,37 +6,37 @@ This binding uses the common clock bindi
Required properties:
- compatible : shall be one of the following:
"allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
"allwinner,sun4i-a10-usb-clk" - for usb gates + resets on A10 / A20
-@@ -69,7 +69,7 @@ For example:
+@@ -68,21 +68,21 @@ For example:
- osc24M: clk@01c20050 {
+ osc24M: osc24M@01c20050 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-osc-clk";
+ compatible = "allwinner,sun4i-a10-osc-clk";
reg = <0x01c20050 0x4>;
clocks = <&osc24M_fixed>;
- clock-output-names = "osc24M";
-@@ -77,7 +77,7 @@ osc24M: clk@01c20050 {
+ };
- pll1: clk@01c20000 {
+ pll1: pll1@01c20000 {
#clock-cells = <0>;
- compatible = "allwinner,sun4i-pll1-clk";
+ compatible = "allwinner,sun4i-a10-pll1-clk";
reg = <0x01c20000 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll1";
-@@ -93,7 +93,7 @@ pll5: clk@01c20020 {
+ };
cpu: cpu@01c20054 {
#clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-cpu-clk";
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&pll1>;
- clock-output-names = "cpu";
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 335c987..23baad9 100644
+ };
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -80,7 +80,7 @@ static void __init sun4i_osc_clk_setup(struct device_node *node)
+@@ -80,7 +80,7 @@ err_free_gate:
err_free_fixed:
kfree(fixed);
}
-@@ -1207,52 +1207,52 @@ static void __init sunxi_divs_clk_setup(struct device_node *node,
+@@ -1207,52 +1207,52 @@ free_clkdata:
/* Matches for factors clocks */
static const struct of_device_id clk_factors_match[] __initconst = {
{.compatible = "allwinner,sun5i-a10s-apb1-gates-clk", .data = &sun5i_a10s_apb1_gates_data,},
{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
---
-2.0.3
-
drivers/clk/sunxi/clk-factors.c | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
-diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c
-index 9e23264..3806d97 100644
--- a/drivers/clk/sunxi/clk-factors.c
+++ b/drivers/clk/sunxi/clk-factors.c
-@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struct clk_hw *hw, unsigned long rate,
+@@ -77,6 +77,41 @@ static long clk_factors_round_rate(struc
return rate;
}
static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
-@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct clk_hw *hw, unsigned long rate,
+@@ -113,6 +148,7 @@ static int clk_factors_set_rate(struct c
}
const struct clk_ops clk_factors_ops = {
.recalc_rate = clk_factors_recalc_rate,
.round_rate = clk_factors_round_rate,
.set_rate = clk_factors_set_rate,
---
-2.0.3
-
2 files changed, 57 insertions(+)
create mode 100644 include/linux/clk/sunxi.h
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 23baad9..9afd8dd 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -507,6 +507,41 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinner,sun7i-a20-gmac-clk",
+@@ -507,6 +507,41 @@ CLK_OF_DECLARE(sun7i_a20_gmac, "allwinne
/**
* sunxi_factors_clk_setup() - Setup function for factor clocks
*/
-diff --git a/include/linux/clk/sunxi.h b/include/linux/clk/sunxi.h
-new file mode 100644
-index 0000000..1ef5c89
--- /dev/null
+++ b/include/linux/clk/sunxi.h
@@ -0,0 +1,22 @@
+void clk_sunxi_mmc_phase_control(struct clk_hw *hw, u8 sample, u8 output);
+
+#endif
---
-2.0.3
-
drivers/ata/sata_highbank.c | 3 ++-
4 files changed, 31 insertions(+), 10 deletions(-)
-diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
-index c81d809..8bfc477 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
-@@ -578,6 +578,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+@@ -583,6 +583,7 @@ static int ahci_vt8251_hardreset(struct
unsigned long deadline)
{
struct ata_port *ap = link->ap;
bool online;
int rc;
-@@ -588,7 +589,7 @@ static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
+@@ -593,7 +594,7 @@ static int ahci_vt8251_hardreset(struct
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
-@@ -603,6 +604,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+@@ -608,6 +609,7 @@ static int ahci_p5wdh_hardreset(struct a
{
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
-@@ -618,7 +620,7 @@ static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
+@@ -623,7 +625,7 @@ static int ahci_p5wdh_hardreset(struct a
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
deadline, &online, NULL);
/* The pseudo configuration device on SIMG4726 attached to
* ASUS P5W-DH Deluxe doesn't send signature FIS after
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 2289efd..64d1a99d 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
-@@ -323,6 +323,12 @@ struct ahci_host_priv {
+@@ -37,6 +37,7 @@
+
+ #include <linux/clk.h>
+ #include <linux/libata.h>
++#include <linux/regulator/consumer.h>
+
+ /* Enclosure Management Control */
+ #define EM_CTRL_MSG_TYPE 0x000f0000
+@@ -51,6 +52,7 @@
+
+ enum {
+ AHCI_MAX_PORTS = 32,
++ AHCI_MAX_CLKS = 3,
+ AHCI_MAX_SG = 168, /* hardware max is 64K */
+ AHCI_DMA_BOUNDARY = 0xffffffff,
+ AHCI_MAX_CMDS = 32,
+@@ -322,8 +324,15 @@ struct ahci_host_priv {
+ u32 em_loc; /* enclosure management location */
+ u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
- struct clk *clk; /* Only for platforms supporting clk */
+- struct clk *clk; /* Only for platforms supporting clk */
++ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
++ struct regulator *target_pwr; /* Optional */
void *plat_data; /* Other platform data */
+ /*
+ * Optional ahci_start_engine override, if not set this gets set to the
};
extern int ahci_ignore_sss;
-diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
-index 36605ab..f839bb3 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
-@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(struct device *dev,
+@@ -394,6 +394,9 @@ static ssize_t ahci_show_em_supported(st
*
* If inconsistent, config values are fixed up by this function.
*
* LOCKING:
* None.
*/
-@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct device *dev,
+@@ -500,6 +503,9 @@ void ahci_save_initial_config(struct dev
hpriv->cap = cap;
hpriv->cap2 = cap2;
hpriv->port_map = port_map;
}
EXPORT_SYMBOL_GPL(ahci_save_initial_config);
-@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_port *ap)
+@@ -766,7 +772,7 @@ static void ahci_start_port(struct ata_p
/* enable DMA */
if (!(hpriv->flags & AHCI_HFLAG_DELAY_ENGINE))
/* turn on LEDs */
if (ap->flags & ATA_FLAG_EM) {
-@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap)
+@@ -1234,7 +1240,7 @@ int ahci_kick_engine(struct ata_port *ap
/* restart engine */
out_restart:
return rc;
}
EXPORT_SYMBOL_GPL(ahci_kick_engine);
-@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+@@ -1426,6 +1432,7 @@ static int ahci_hardreset(struct ata_lin
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
-@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_link *link, unsigned int *class,
+@@ -1443,7 +1450,7 @@ static int ahci_hardreset(struct ata_lin
rc = sata_link_hardreset(link, timing, deadline, &online,
ahci_check_ready);
if (online)
*class = ahci_dev_classify(ap);
-@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *ap)
+@@ -2007,10 +2014,12 @@ static void ahci_thaw(struct ata_port *a
void ahci_error_handler(struct ata_port *ap)
{
}
sata_pmp_error_handler(ap);
-@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+@@ -2031,6 +2040,7 @@ static void ahci_post_internal_cmd(struc
static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
{
void __iomem *port_mmio = ahci_port_base(ap);
struct ata_device *dev = ap->link.device;
u32 devslp, dm, dito, mdat, deto;
-@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
+@@ -2094,7 +2104,7 @@ static void ahci_set_aggressive_devslp(s
PORT_DEVSLP_ADSE);
writel(devslp, port_mmio + PORT_DEVSLP);
/* enable device sleep feature for the drive */
err_mask = ata_dev_set_feature(dev,
-@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
+@@ -2106,6 +2116,7 @@ static void ahci_set_aggressive_devslp(s
static void ahci_enable_fbs(struct ata_port *ap)
{
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
-@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_port *ap)
+@@ -2134,11 +2145,12 @@ static void ahci_enable_fbs(struct ata_p
} else
dev_err(ap->host->dev, "Failed to enable FBS\n");
struct ahci_port_priv *pp = ap->private_data;
void __iomem *port_mmio = ahci_port_base(ap);
u32 fbs;
-@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_port *ap)
+@@ -2166,7 +2178,7 @@ static void ahci_disable_fbs(struct ata_
pp->fbs_enabled = false;
}
}
static void ahci_pmp_attach(struct ata_port *ap)
-diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
-index 870b11e..b3b18d1 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
-@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
+@@ -403,6 +403,7 @@ static int ahci_highbank_hardreset(struc
static const unsigned long timing[] = { 5, 100, 500};
struct ata_port *ap = link->ap;
struct ahci_port_priv *pp = ap->private_data;
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
struct ata_taskfile tf;
bool online;
-@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
+@@ -431,7 +432,7 @@ static int ahci_highbank_hardreset(struc
break;
} while (!online && retry--);
if (online)
*class = ahci_dev_classify(ap);
---
-2.0.3
-
-From fcc3a79f048480e6723b0cfd294f9eecbf73dfd9 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Thu, 16 Jan 2014 14:32:35 +0100
-Subject: [PATCH] ahci-platform: Add support for devices with more then 1 clock
-
-The allwinner-sun4i AHCI controller needs 2 clocks to be enabled and the
-imx AHCI controller needs 3 clocks to be enabled.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- .../devicetree/bindings/ata/ahci-platform.txt | 1 +
- drivers/ata/ahci.h | 3 +-
- drivers/ata/ahci_platform.c | 119 ++++++++++++++++-----
- include/linux/ahci_platform.h | 4 +
- 4 files changed, 99 insertions(+), 28 deletions(-)
-
-diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-index 89de156..3ced07d 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-@@ -10,6 +10,7 @@ Required properties:
+@@ -10,6 +10,8 @@ Required properties:
Optional properties:
- dma-coherent : Present if dma operations are coherent
+- clocks : a list of phandle + clock specifier pairs
++- target-supply : regulator for SATA target power
Example:
sata@ffe08000 {
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 64d1a99d..c12862b 100644
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -51,6 +51,7 @@
-
- enum {
- AHCI_MAX_PORTS = 32,
-+ AHCI_MAX_CLKS = 3,
- AHCI_MAX_SG = 168, /* hardware max is 64K */
- AHCI_DMA_BOUNDARY = 0xffffffff,
- AHCI_MAX_CMDS = 32,
-@@ -321,7 +322,7 @@ struct ahci_host_priv {
- u32 em_loc; /* enclosure management location */
- u32 em_buf_sz; /* EM buffer size in byte */
- u32 em_msg_type; /* EM message type */
-- struct clk *clk; /* Only for platforms supporting clk */
-+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- void *plat_data; /* Other platform data */
- /*
- * Optional ahci_start_engine override, if not set this gets set to the
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 4b231ba..609975d 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -87,6 +87,66 @@ static struct scsi_host_template ahci_platform_sht = {
+@@ -87,78 +87,252 @@ static struct scsi_host_template ahci_pl
AHCI_SHT("ahci_platform"),
};
+-static int ahci_probe(struct platform_device *pdev)
+/**
+ * ahci_platform_enable_clks - Enable platform clocks
+ * @hpriv: host private area to store config values
+ * 0 on success otherwise a negative error code
+ */
+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv)
-+{
+ {
+- struct device *dev = &pdev->dev;
+- struct ahci_platform_data *pdata = dev_get_platdata(dev);
+- const struct platform_device_id *id = platform_get_device_id(pdev);
+- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
+- const struct ata_port_info *ppi[] = { &pi, NULL };
+- struct ahci_host_priv *hpriv;
+- struct ata_host *host;
+- struct resource *mem;
+- int irq;
+- int n_ports;
+- int i;
+- int rc;
+ int c, rc;
-+
+
+- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+- if (!mem) {
+- dev_err(dev, "no mmio space\n");
+- return -EINVAL;
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++) {
+ rc = clk_prepare_enable(hpriv->clks[c]);
+ if (rc)
+ goto disable_unprepare_clk;
-+ }
+ }
+ return 0;
-+
+
+- irq = platform_get_irq(pdev, 0);
+- if (irq <= 0) {
+- dev_err(dev, "no irq\n");
+- return -EINVAL;
+- }
+disable_unprepare_clk:
+ while (--c >= 0)
+ clk_disable_unprepare(hpriv->clks[c]);
+ return rc;
+}
+EXPORT_SYMBOL_GPL(ahci_platform_enable_clks);
-+
+
+- if (pdata && pdata->ata_port_info)
+- pi = *pdata->ata_port_info;
+/**
+ * ahci_platform_disable_clks - Disable platform clocks
+ * @hpriv: host private area to store config values
+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
+{
+ int c;
-+
+
+- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+- if (!hpriv) {
+- dev_err(dev, "can't alloc ahci_host_priv\n");
+- return -ENOMEM;
+ for (c = AHCI_MAX_CLKS - 1; c >= 0; c--)
+ if (hpriv->clks[c])
+ clk_disable_unprepare(hpriv->clks[c]);
+}
+EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+
-+static void ahci_put_clks(struct ahci_host_priv *hpriv)
-+{
-+ int c;
-+
-+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
-+ clk_put(hpriv->clks[c]);
-+}
-+
- static int ahci_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -97,6 +157,7 @@ static int ahci_probe(struct platform_device *pdev)
- struct ahci_host_priv *hpriv;
- struct ata_host *host;
- struct resource *mem;
-+ struct clk *clk;
- int irq;
- int n_ports;
- int i;
-@@ -131,17 +192,31 @@ static int ahci_probe(struct platform_device *pdev)
- return -ENOMEM;
- }
-
-- hpriv->clk = clk_get(dev, NULL);
-- if (IS_ERR(hpriv->clk)) {
-- dev_err(dev, "can't get clock\n");
-- } else {
-- rc = clk_prepare_enable(hpriv->clk);
-- if (rc) {
-- dev_err(dev, "clock prepare enable failed");
-- goto free_clk;
-+ for (i = 0; i < AHCI_MAX_CLKS; i++) {
-+ /*
-+ * For now we must use clk_get(dev, NULL) for the first clock,
-+ * because some platforms (da850, spear13xx) are not yet
-+ * converted to use devicetree for clocks. For new platforms
-+ * this is equivalent to of_clk_get(dev->of_node, 0).
-+ */
-+ if (i == 0)
-+ clk = clk_get(dev, NULL);
-+ else
-+ clk = of_clk_get(dev->of_node, i);
-+
-+ if (IS_ERR(clk)) {
-+ rc = PTR_ERR(clk);
-+ if (rc == -EPROBE_DEFER)
-+ goto free_clk;
-+ break;
- }
-+ hpriv->clks[i] = clk;
- }
-
-+ rc = ahci_enable_clks(dev, hpriv);
-+ if (rc)
-+ goto free_clk;
-+
- /*
- * Some platforms might need to prepare for mmio region access,
- * which could be done in the following init call. So, the mmio
-@@ -222,11 +297,9 @@ static int ahci_probe(struct platform_device *pdev)
- if (pdata && pdata->exit)
- pdata->exit(dev);
- disable_unprepare_clk:
-- if (!IS_ERR(hpriv->clk))
-- clk_disable_unprepare(hpriv->clk);
-+ ahci_disable_clks(hpriv);
- free_clk:
-- if (!IS_ERR(hpriv->clk))
-- clk_put(hpriv->clk);
-+ ahci_put_clks(hpriv);
- return rc;
- }
-
-@@ -239,10 +312,8 @@ static void ahci_host_stop(struct ata_host *host)
- if (pdata && pdata->exit)
- pdata->exit(dev);
-
-- if (!IS_ERR(hpriv->clk)) {
-- clk_disable_unprepare(hpriv->clk);
-- clk_put(hpriv->clk);
-- }
-+ ahci_disable_clks(hpriv);
-+ ahci_put_clks(hpriv);
- }
-
- #ifdef CONFIG_PM_SLEEP
-@@ -277,8 +348,7 @@ static int ahci_suspend(struct device *dev)
- if (pdata && pdata->suspend)
- return pdata->suspend(dev);
-
-- if (!IS_ERR(hpriv->clk))
-- clk_disable_unprepare(hpriv->clk);
-+ ahci_disable_clks(hpriv);
-
- return 0;
- }
-@@ -290,13 +360,9 @@ static int ahci_resume(struct device *dev)
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
-- if (!IS_ERR(hpriv->clk)) {
-- rc = clk_prepare_enable(hpriv->clk);
-- if (rc) {
-- dev_err(dev, "clock prepare enable failed");
-- return rc;
-- }
-- }
-+ rc = ahci_enable_clks(dev, hpriv);
-+ if (rc)
-+ return rc;
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
-@@ -317,8 +383,7 @@ static int ahci_resume(struct device *dev)
- return 0;
-
- disable_unprepare_clk:
-- if (!IS_ERR(hpriv->clk))
-- clk_disable_unprepare(hpriv->clk);
-+ ahci_disable_clks(hpriv);
-
- return rc;
- }
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index 73a2500..769d065 100644
---- a/include/linux/ahci_platform.h
-+++ b/include/linux/ahci_platform.h
-@@ -19,6 +19,7 @@
-
- struct device;
- struct ata_port_info;
-+struct ahci_host_priv;
-
- struct ahci_platform_data {
- int (*init)(struct device *dev, void __iomem *addr);
-@@ -30,4 +31,7 @@ struct ahci_platform_data {
- unsigned int mask_port_map;
- };
-
-+int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
-+void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
-+
- #endif /* _AHCI_PLATFORM_H */
---
-2.0.3
-
-From 3dc53b267843b6dfeb2eb67e52e17915dc2347ab Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Fri, 17 Jan 2014 13:23:21 +0100
-Subject: [PATCH] ahci-platform: Add support for an optional regulator for
- sata-target power
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- .../devicetree/bindings/ata/ahci-platform.txt | 1 +
- drivers/ata/ahci.h | 2 ++
- drivers/ata/ahci_platform.c | 36 ++++++++++++++++++++--
- 3 files changed, 37 insertions(+), 2 deletions(-)
-
-diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-index 3ced07d..1ac807f 100644
---- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
-+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-@@ -11,6 +11,7 @@ Required properties:
- Optional properties:
- - dma-coherent : Present if dma operations are coherent
- - clocks : a list of phandle + clock specifier pairs
-+- target-supply : regulator for SATA target power
-
- Example:
- sata@ffe08000 {
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index c12862b..bf8100c 100644
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -37,6 +37,7 @@
-
- #include <linux/clk.h>
- #include <linux/libata.h>
-+#include <linux/regulator/consumer.h>
-
- /* Enclosure Management Control */
- #define EM_CTRL_MSG_TYPE 0x000f0000
-@@ -323,6 +324,7 @@ struct ahci_host_priv {
- u32 em_buf_sz; /* EM buffer size in byte */
- u32 em_msg_type; /* EM message type */
- struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
-+ struct regulator *target_pwr; /* Optional */
- void *plat_data; /* Other platform data */
- /*
- * Optional ahci_start_engine override, if not set this gets set to the
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 609975d..907c076 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -192,6 +192,14 @@ static int ahci_probe(struct platform_device *pdev)
- return -ENOMEM;
- }
-
-+ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
-+ if (IS_ERR(hpriv->target_pwr)) {
-+ rc = PTR_ERR(hpriv->target_pwr);
-+ if (rc == -EPROBE_DEFER)
-+ return -EPROBE_DEFER;
-+ hpriv->target_pwr = NULL;
-+ }
-+
- for (i = 0; i < AHCI_MAX_CLKS; i++) {
- /*
- * For now we must use clk_get(dev, NULL) for the first clock,
-@@ -213,9 +221,15 @@ static int ahci_probe(struct platform_device *pdev)
- hpriv->clks[i] = clk;
- }
-
-+ if (hpriv->target_pwr) {
-+ rc = regulator_enable(hpriv->target_pwr);
-+ if (rc)
-+ goto free_clk;
-+ }
-+
- rc = ahci_enable_clks(dev, hpriv);
- if (rc)
-- goto free_clk;
-+ goto disable_regulator;
-
- /*
- * Some platforms might need to prepare for mmio region access,
-@@ -298,6 +312,9 @@ static int ahci_probe(struct platform_device *pdev)
- pdata->exit(dev);
- disable_unprepare_clk:
- ahci_disable_clks(hpriv);
-+disable_regulator:
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
- free_clk:
- ahci_put_clks(hpriv);
- return rc;
-@@ -314,6 +331,9 @@ static void ahci_host_stop(struct ata_host *host)
-
- ahci_disable_clks(hpriv);
- ahci_put_clks(hpriv);
-+
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
- }
-
- #ifdef CONFIG_PM_SLEEP
-@@ -350,6 +370,9 @@ static int ahci_suspend(struct device *dev)
-
- ahci_disable_clks(hpriv);
-
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
-+
- return 0;
- }
-
-@@ -360,9 +383,15 @@ static int ahci_resume(struct device *dev)
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
-+ if (hpriv->target_pwr) {
-+ rc = regulator_enable(hpriv->target_pwr);
-+ if (rc)
-+ return rc;
-+ }
-+
- rc = ahci_enable_clks(dev, hpriv);
- if (rc)
-- return rc;
-+ goto disable_regulator;
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
-@@ -384,6 +413,9 @@ static int ahci_resume(struct device *dev)
-
- disable_unprepare_clk:
- ahci_disable_clks(hpriv);
-+disable_regulator:
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
-
- return rc;
- }
---
-2.0.3
-
-From 74f54552b061865ff46d43aa68d0c6e8852dc592 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 20 Jan 2014 14:54:40 +0100
-Subject: [PATCH] ahci-platform: Add enable_ / disable_resources helper
- functions
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci_platform.c | 112 ++++++++++++++++++++++++++++--------------
- include/linux/ahci_platform.h | 2 +
- 2 files changed, 77 insertions(+), 37 deletions(-)
-
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 907c076..6ebbc17 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -139,6 +139,68 @@ void ahci_platform_disable_clks(struct ahci_host_priv *hpriv)
- }
- EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
-
+/**
+ * ahci_platform_enable_resources - Enable platform resources
+ * @hpriv: host private area to store config values
+ int rc;
+
+ if (hpriv->target_pwr) {
-+ rc = regulator_enable(hpriv->target_pwr);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ rc = ahci_platform_enable_clks(hpriv);
-+ if (rc)
-+ goto disable_regulator;
-+
-+ return 0;
-+
-+disable_regulator:
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
-+ return rc;
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
-+
-+/**
-+ * ahci_platform_disable_resources - Disable platform resources
-+ * @hpriv: host private area to store config values
-+ *
-+ * This function disables all ahci_platform managed resources in
-+ * the following order:
-+ * 1) Clocks (through ahci_platform_disable_clks)
-+ * 2) Regulator
-+ *
-+ * LOCKING:
-+ * None.
-+ */
-+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
-+{
-+ ahci_platform_disable_clks(hpriv);
-+
-+ if (hpriv->target_pwr)
-+ regulator_disable(hpriv->target_pwr);
-+}
-+EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
-+
- static void ahci_put_clks(struct ahci_host_priv *hpriv)
- {
- int c;
-@@ -221,15 +283,9 @@ static int ahci_probe(struct platform_device *pdev)
- hpriv->clks[i] = clk;
- }
-
-- if (hpriv->target_pwr) {
-- rc = regulator_enable(hpriv->target_pwr);
-- if (rc)
-- goto free_clk;
-- }
--
-- rc = ahci_enable_clks(dev, hpriv);
-+ rc = ahci_platform_enable_resources(hpriv);
- if (rc)
-- goto disable_regulator;
-+ goto free_clk;
-
- /*
- * Some platforms might need to prepare for mmio region access,
-@@ -240,7 +296,7 @@ static int ahci_probe(struct platform_device *pdev)
- if (pdata && pdata->init) {
- rc = pdata->init(dev, hpriv->mmio);
- if (rc)
-- goto disable_unprepare_clk;
-+ goto disable_resources;
- }
-
- ahci_save_initial_config(dev, hpriv,
-@@ -310,11 +366,8 @@ static int ahci_probe(struct platform_device *pdev)
- pdata_exit:
- if (pdata && pdata->exit)
- pdata->exit(dev);
--disable_unprepare_clk:
-- ahci_disable_clks(hpriv);
--disable_regulator:
-- if (hpriv->target_pwr)
-- regulator_disable(hpriv->target_pwr);
-+disable_resources:
-+ ahci_platform_disable_resources(hpriv);
- free_clk:
- ahci_put_clks(hpriv);
- return rc;
-@@ -329,11 +382,8 @@ static void ahci_host_stop(struct ata_host *host)
- if (pdata && pdata->exit)
- pdata->exit(dev);
-
-- ahci_disable_clks(hpriv);
-+ ahci_platform_disable_resources(hpriv);
- ahci_put_clks(hpriv);
--
-- if (hpriv->target_pwr)
-- regulator_disable(hpriv->target_pwr);
- }
-
- #ifdef CONFIG_PM_SLEEP
-@@ -368,10 +418,7 @@ static int ahci_suspend(struct device *dev)
- if (pdata && pdata->suspend)
- return pdata->suspend(dev);
-
-- ahci_disable_clks(hpriv);
--
-- if (hpriv->target_pwr)
-- regulator_disable(hpriv->target_pwr);
-+ ahci_platform_disable_resources(hpriv);
-
- return 0;
- }
-@@ -383,26 +430,20 @@ static int ahci_resume(struct device *dev)
- struct ahci_host_priv *hpriv = host->private_data;
- int rc;
-
-- if (hpriv->target_pwr) {
-- rc = regulator_enable(hpriv->target_pwr);
-- if (rc)
-- return rc;
-- }
--
-- rc = ahci_enable_clks(dev, hpriv);
-+ rc = ahci_platform_enable_resources(hpriv);
- if (rc)
-- goto disable_regulator;
-+ return rc;
-
- if (pdata && pdata->resume) {
- rc = pdata->resume(dev);
- if (rc)
-- goto disable_unprepare_clk;
-+ goto disable_resources;
- }
-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
-- goto disable_unprepare_clk;
-+ goto disable_resources;
-
- ahci_init_controller(host);
- }
-@@ -411,11 +452,8 @@ static int ahci_resume(struct device *dev)
-
- return 0;
-
--disable_unprepare_clk:
-- ahci_disable_clks(hpriv);
--disable_regulator:
-- if (hpriv->target_pwr)
-- regulator_disable(hpriv->target_pwr);
-+disable_resources:
-+ ahci_platform_disable_resources(hpriv);
-
- return rc;
- }
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index 769d065..b674b01 100644
---- a/include/linux/ahci_platform.h
-+++ b/include/linux/ahci_platform.h
-@@ -33,5 +33,7 @@ struct ahci_platform_data {
-
- int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
- void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
-+int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
-+void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
-
- #endif /* _AHCI_PLATFORM_H */
---
-2.0.3
-
-From 88972833cba7a6dad8e9a1c9b43ab02fc274e4fd Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 20 Jan 2014 14:58:04 +0100
-Subject: [PATCH] ahci-platform: "Library-ise" ahci_probe functionality
-
-ahci_probe consists of 3 steps:
-1) Get resources (get mmio, clks, regulator)
-2) Enable resources, handled by ahci_platform_enable_resouces
-3) The more or less standard ahci-host controller init sequence
-
-This commit refactors step 1 and 3 into separate functions, so the platform
-drivers for AHCI implementations which need a specific order in step 2,
-and / or need to do some custom register poking at some time, can re-use
-ahci-platform.c code without needing to copy and paste it.
-
-Note that ahci_platform_init_host's prototype takes the 3 non function
-members of ahci_platform_data as arguments, the idea is that drivers using
-the new exported utility functions will not use ahci_platform_data at all,
-and hopefully in the future ahci_platform_data can go away entirely.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci_platform.c | 195 ++++++++++++++++++++++++++++--------------
- include/linux/ahci_platform.h | 14 +++
- 2 files changed, 144 insertions(+), 65 deletions(-)
-
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 6ebbc17..7f3f2ac 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -201,64 +201,64 @@ void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
- }
- EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
++ rc = regulator_enable(hpriv->target_pwr);
++ if (rc)
++ return rc;
+ }
+
+- hpriv->flags |= (unsigned long)pi.private_data;
++ rc = ahci_platform_enable_clks(hpriv);
++ if (rc)
++ goto disable_regulator;
++
++ return 0;
++
++disable_regulator:
++ if (hpriv->target_pwr)
++ regulator_disable(hpriv->target_pwr);
++ return rc;
++}
++EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
++
++/**
++ * ahci_platform_disable_resources - Disable platform resources
++ * @hpriv: host private area to store config values
++ *
++ * This function disables all ahci_platform managed resources in
++ * the following order:
++ * 1) Clocks (through ahci_platform_disable_clks)
++ * 2) Regulator
++ *
++ * LOCKING:
++ * None.
++ */
++void ahci_platform_disable_resources(struct ahci_host_priv *hpriv)
++{
++ ahci_platform_disable_clks(hpriv);
--static void ahci_put_clks(struct ahci_host_priv *hpriv)
+- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
++ if (hpriv->target_pwr)
++ regulator_disable(hpriv->target_pwr);
++}
++EXPORT_SYMBOL_GPL(ahci_platform_disable_resources);
++
+static void ahci_platform_put_resources(struct device *dev, void *res)
- {
++{
+ struct ahci_host_priv *hpriv = res;
- int c;
-
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
- clk_put(hpriv->clks[c]);
- }
-
--static int ahci_probe(struct platform_device *pdev)
++ int c;
++
++ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
++ clk_put(hpriv->clks[c]);
++}
++
+/**
+ * ahci_platform_get_resources - Get platform resources
+ * @pdev: platform device to get resources for
+ */
+struct ahci_host_priv *ahci_platform_get_resources(
+ struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-- struct ahci_platform_data *pdata = dev_get_platdata(dev);
-- const struct platform_device_id *id = platform_get_device_id(pdev);
-- struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
-- const struct ata_port_info *ppi[] = { &pi, NULL };
- struct ahci_host_priv *hpriv;
-- struct ata_host *host;
-- struct resource *mem;
- struct clk *clk;
-- int irq;
-- int n_ports;
-- int i;
-- int rc;
++{
++ struct device *dev = &pdev->dev;
++ struct ahci_host_priv *hpriv;
++ struct clk *clk;
+ int i, rc = -ENOMEM;
-
-- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!mem) {
-- dev_err(dev, "no mmio space\n");
-- return -EINVAL;
-- }
++
+ if (!devres_open_group(dev, NULL, GFP_KERNEL))
+ return ERR_PTR(-ENOMEM);
-
-- irq = platform_get_irq(pdev, 0);
-- if (irq <= 0) {
-- dev_err(dev, "no irq\n");
-- return -EINVAL;
-- }
++
+ hpriv = devres_alloc(ahci_platform_put_resources, sizeof(*hpriv),
+ GFP_KERNEL);
+ if (!hpriv)
+ goto err_out;
-
-- if (pdata && pdata->ata_port_info)
-- pi = *pdata->ata_port_info;
++
+ devres_add(dev, hpriv);
-
-- hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-- if (!hpriv) {
-- dev_err(dev, "can't alloc ahci_host_priv\n");
-- return -ENOMEM;
-- }
--
-- hpriv->flags |= (unsigned long)pi.private_data;
--
-- hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
++
+ hpriv->mmio = devm_ioremap_resource(dev,
+ platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (!hpriv->mmio) {
+ goto err_out;
}
- hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
- if (IS_ERR(hpriv->target_pwr)) {
- rc = PTR_ERR(hpriv->target_pwr);
- if (rc == -EPROBE_DEFER)
-- return -EPROBE_DEFER;
+- hpriv->clk = clk_get(dev, NULL);
+- if (IS_ERR(hpriv->clk)) {
+- dev_err(dev, "can't get clock\n");
+- } else {
+- rc = clk_prepare_enable(hpriv->clk);
+- if (rc) {
+- dev_err(dev, "clock prepare enable failed");
+- goto free_clk;
++ hpriv->target_pwr = devm_regulator_get_optional(dev, "target");
++ if (IS_ERR(hpriv->target_pwr)) {
++ rc = PTR_ERR(hpriv->target_pwr);
++ if (rc == -EPROBE_DEFER)
+ goto err_out;
- hpriv->target_pwr = NULL;
- }
-
-@@ -277,33 +277,62 @@ static int ahci_probe(struct platform_device *pdev)
- if (IS_ERR(clk)) {
- rc = PTR_ERR(clk);
- if (rc == -EPROBE_DEFER)
-- goto free_clk;
++ hpriv->target_pwr = NULL;
++ }
++
++ for (i = 0; i < AHCI_MAX_CLKS; i++) {
++ /*
++ * For now we must use clk_get(dev, NULL) for the first clock,
++ * because some platforms (da850, spear13xx) are not yet
++ * converted to use devicetree for clocks. For new platforms
++ * this is equivalent to of_clk_get(dev->of_node, 0).
++ */
++ if (i == 0)
++ clk = clk_get(dev, NULL);
++ else
++ clk = of_clk_get(dev->of_node, i);
++
++ if (IS_ERR(clk)) {
++ rc = PTR_ERR(clk);
++ if (rc == -EPROBE_DEFER)
+ goto err_out;
- break;
++ break;
}
- hpriv->clks[i] = clk;
++ hpriv->clks[i] = clk;
}
-- rc = ahci_platform_enable_resources(hpriv);
-- if (rc)
-- goto free_clk;
-+ devres_remove_group(dev, NULL);
-+ return hpriv;
-
- /*
- * Some platforms might need to prepare for mmio region access,
- * which could be done in the following init call. So, the mmio
- if (pdata && pdata->init) {
- rc = pdata->init(dev, hpriv->mmio);
- if (rc)
-- goto disable_resources;
+- goto disable_unprepare_clk;
- }
++ devres_remove_group(dev, NULL);
++ return hpriv;
++
+err_out:
+ devres_release_group(dev, NULL);
+ return ERR_PTR(rc);
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
-@@ -320,10 +349,8 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -175,10 +349,8 @@ static int ahci_probe(struct platform_de
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
host->private_data = hpriv;
-@@ -338,7 +365,8 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -193,7 +365,8 @@ static int ahci_probe(struct platform_de
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
-@@ -352,13 +380,53 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -207,13 +380,53 @@ static int ahci_probe(struct platform_de
rc = ahci_reset_controller(host);
if (rc)
if (rc)
goto pdata_exit;
-@@ -368,8 +436,6 @@ static int ahci_probe(struct platform_device *pdev)
+@@ -221,12 +434,8 @@ static int ahci_probe(struct platform_de
+ pdata_exit:
+ if (pdata && pdata->exit)
pdata->exit(dev);
- disable_resources:
- ahci_platform_disable_resources(hpriv);
+-disable_unprepare_clk:
+- if (!IS_ERR(hpriv->clk))
+- clk_disable_unprepare(hpriv->clk);
-free_clk:
-- ahci_put_clks(hpriv);
+- if (!IS_ERR(hpriv->clk))
+- clk_put(hpriv->clk);
++disable_resources:
++ ahci_platform_disable_resources(hpriv);
return rc;
}
-@@ -383,7 +449,6 @@ static void ahci_host_stop(struct ata_host *host)
+@@ -239,21 +448,30 @@ static void ahci_host_stop(struct ata_ho
+ if (pdata && pdata->exit)
pdata->exit(dev);
- ahci_platform_disable_resources(hpriv);
-- ahci_put_clks(hpriv);
- }
-
- #ifdef CONFIG_PM_SLEEP
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index b674b01..b80c51c 100644
---- a/include/linux/ahci_platform.h
-+++ b/include/linux/ahci_platform.h
-@@ -20,7 +20,14 @@
- struct device;
- struct ata_port_info;
- struct ahci_host_priv;
-+struct platform_device;
-
-+/*
-+ * Note ahci_platform_data is deprecated, it is only kept around for use
-+ * by the old da850 and spear13xx ahci code.
-+ * New drivers should instead declare their own platform_driver struct, and
-+ * use ahci_platform* functions in their own probe, suspend and resume methods.
-+ */
- struct ahci_platform_data {
- int (*init)(struct device *dev, void __iomem *addr);
- void (*exit)(struct device *dev);
-@@ -35,5 +42,12 @@ int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
- void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
- int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
- void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
-+struct ahci_host_priv *ahci_platform_get_resources(
-+ struct platform_device *pdev);
-+int ahci_platform_init_host(struct platform_device *pdev,
-+ struct ahci_host_priv *hpriv,
-+ const struct ata_port_info *pi_template,
-+ unsigned int force_port_map,
-+ unsigned int mask_port_map);
-
- #endif /* _AHCI_PLATFORM_H */
---
-2.0.3
-
-From dffde1e107b4360a4ff6b3aec3693e8b3b4a1bd0 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Mon, 20 Jan 2014 15:52:07 +0100
-Subject: [PATCH] ahci-platform: "Library-ise" suspend / resume functionality
-
-Split suspend / resume code into host suspend / resume functionality and
-resource enable / disabling phases, and export the new suspend_ / resume_host
-functions.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci_platform.c | 109 ++++++++++++++++++++++++++++++++++++------
- include/linux/ahci_platform.h | 5 ++
- 2 files changed, 99 insertions(+), 15 deletions(-)
-
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 7f3f2ac..bdadec1 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -452,14 +452,26 @@ static void ahci_host_stop(struct ata_host *host)
+- if (!IS_ERR(hpriv->clk)) {
+- clk_disable_unprepare(hpriv->clk);
+- clk_put(hpriv->clk);
+- }
++ ahci_platform_disable_resources(hpriv);
}
#ifdef CONFIG_PM_SLEEP
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
-@@ -476,7 +488,64 @@ static int ahci_suspend(struct device *dev)
+@@ -270,61 +488,122 @@ static int ahci_suspend(struct device *d
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
if (rc)
return rc;
-@@ -487,8 +556,22 @@ static int ahci_suspend(struct device *dev)
+ if (pdata && pdata->suspend)
+ return pdata->suspend(dev);
+
+- if (!IS_ERR(hpriv->clk))
+- clk_disable_unprepare(hpriv->clk);
++ ahci_platform_disable_resources(hpriv);
return 0;
}
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
-@@ -505,15 +588,9 @@ static int ahci_resume(struct device *dev)
- goto disable_resources;
- }
+ struct ahci_host_priv *hpriv = host->private_data;
+ int rc;
+
+- if (!IS_ERR(hpriv->clk)) {
+- rc = clk_prepare_enable(hpriv->clk);
+- if (rc) {
+- dev_err(dev, "clock prepare enable failed");
+- return rc;
+- }
+- }
++ rc = ahci_platform_enable_resources(hpriv);
++ if (rc)
++ return rc;
+ if (pdata && pdata->resume) {
+ rc = pdata->resume(dev);
+ if (rc)
+- goto disable_unprepare_clk;
+- }
+-
- if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
- rc = ahci_reset_controller(host);
- if (rc)
-- goto disable_resources;
+- goto disable_unprepare_clk;
-
- ahci_init_controller(host);
-- }
--
++ goto disable_resources;
+ }
+
- ata_host_resume(host);
+ rc = ahci_platform_resume_host(dev);
+ if (rc)
return 0;
-@@ -522,9 +599,11 @@ static int ahci_resume(struct device *dev)
+-disable_unprepare_clk:
+- if (!IS_ERR(hpriv->clk))
+- clk_disable_unprepare(hpriv->clk);
++disable_resources:
++ ahci_platform_disable_resources(hpriv);
return rc;
}
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
-diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
-index b80c51c..542f268 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
-@@ -50,4 +50,9 @@ int ahci_platform_init_host(struct platform_device *pdev,
- unsigned int force_port_map,
- unsigned int mask_port_map);
+@@ -19,7 +19,15 @@
+
+ struct device;
+ struct ata_port_info;
++struct ahci_host_priv;
++struct platform_device;
+
++/*
++ * Note ahci_platform_data is deprecated, it is only kept around for use
++ * by the old da850 and spear13xx ahci code.
++ * New drivers should instead declare their own platform_driver struct, and
++ * use ahci_platform* functions in their own probe, suspend and resume methods.
++ */
+ struct ahci_platform_data {
+ int (*init)(struct device *dev, void __iomem *addr);
+ void (*exit)(struct device *dev);
+@@ -30,4 +38,21 @@ struct ahci_platform_data {
+ unsigned int mask_port_map;
+ };
++int ahci_platform_enable_clks(struct ahci_host_priv *hpriv);
++void ahci_platform_disable_clks(struct ahci_host_priv *hpriv);
++int ahci_platform_enable_resources(struct ahci_host_priv *hpriv);
++void ahci_platform_disable_resources(struct ahci_host_priv *hpriv);
++struct ahci_host_priv *ahci_platform_get_resources(
++ struct platform_device *pdev);
++int ahci_platform_init_host(struct platform_device *pdev,
++ struct ahci_host_priv *hpriv,
++ const struct ata_port_info *pi_template,
++ unsigned int force_port_map,
++ unsigned int mask_port_map);
++
+int ahci_platform_suspend_host(struct device *dev);
+int ahci_platform_resume_host(struct device *dev);
+int ahci_platform_suspend(struct device *dev);
+int ahci_platform_resume(struct device *dev);
+
#endif /* _AHCI_PLATFORM_H */
---
-2.0.3
-
4 files changed, 271 insertions(+), 3 deletions(-)
create mode 100644 drivers/ata/ahci_sunxi.c
-diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-index 1ac807f..499bfed 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
-@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
+@@ -4,7 +4,9 @@ SATA nodes are defined to describe on-ch
Each SATA controller should have its own node.
Required properties:
+ clocks = <&pll6 0>, <&ahb_gates 25>;
+ target-supply = <®_ahci_5v>;
+ };
-diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
-index 868429a4..10a9c25 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -106,6 +106,15 @@ config AHCI_IMX
config SATA_FSL
tristate "Freescale 3.0Gbps SATA support"
depends on FSL_SOC
-diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
-index 46518c6..246050b 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_SATA_SIL24) += sata_sil24.o
# SFF w/ custom DMA
obj-$(CONFIG_PDC_ADMA) += pdc_adma.o
-diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
-new file mode 100644
-index 0000000..001f7dfc
--- /dev/null
+++ b/drivers/ata/ahci_sunxi.c
@@ -0,0 +1,249 @@
+MODULE_DESCRIPTION("Allwinner sunxi AHCI SATA driver");
+MODULE_AUTHOR("Olliver Schinagl <oliver@schinagl.nl>");
+MODULE_LICENSE("GPL");
---
-2.0.3
-
drivers/ata/ahci_platform.c | 1 +
1 file changed, 1 insertion(+)
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index bdadec1..d7e55ba 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
-@@ -609,6 +609,7 @@ static const struct of_device_id ahci_of_match[] = {
- { .compatible = "snps,spear-ahci", },
- { .compatible = "snps,exynos5440-ahci", },
- { .compatible = "ibm,476gtr-ahci", },
-+ { .compatible = "snps,dwc-ahci", },
- {},
- };
- MODULE_DEVICE_TABLE(of, ahci_of_match);
---
-2.0.3
-
-From 2be39fa6b6531bd083c766999345adc348b14c77 Mon Sep 17 00:00:00 2001
-From: Roger Quadros <rogerq@ti.com>
-Date: Mon, 27 Jan 2014 16:41:18 +0200
-Subject: [PATCH] ata: ahci_platform: Manage SATA PHY
-
-Some platforms have a PHY hooked up to the
-SATA controller. The PHY needs to be initialized
-and powered up for SATA to work. We do that
-using the PHY framework.
-
-CC: Balaji T K <balajitk@ti.com>
-Signed-off-by: Roger Quadros <rogerq@ti.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci.h | 2 ++
- drivers/ata/ahci_platform.c | 47 +++++++++++++++++++++++++++++++++++++++++++--
- 2 files changed, 47 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index bf8100c..3ab7ac9 100644
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -37,6 +37,7 @@
-
- #include <linux/clk.h>
- #include <linux/libata.h>
-+#include <linux/phy/phy.h>
- #include <linux/regulator/consumer.h>
-
- /* Enclosure Management Control */
-@@ -325,6 +326,7 @@ struct ahci_host_priv {
- u32 em_msg_type; /* EM message type */
- struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- struct regulator *target_pwr; /* Optional */
-+ struct phy *phy; /* If platform uses phy */
- void *plat_data; /* Other platform data */
- /*
- * Optional ahci_start_engine override, if not set this gets set to the
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index d7e55ba..99d38c1 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -23,6 +23,7 @@
+@@ -23,6 +23,8 @@
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
+#include <linux/phy/phy.h>
++#include <linux/pm_runtime.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
-@@ -147,6 +148,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_clks);
+@@ -147,6 +149,7 @@ EXPORT_SYMBOL_GPL(ahci_platform_disable_
* the following order:
* 1) Regulator
* 2) Clocks (through ahci_platform_enable_clks)
*
* If resource enabling fails at any point the previous enabled
* resources are disabled in reverse order.
-@@ -171,8 +173,23 @@ int ahci_platform_enable_resources(struct ahci_host_priv *hpriv)
+@@ -171,8 +174,23 @@ int ahci_platform_enable_resources(struc
if (rc)
goto disable_regulator;
disable_regulator:
if (hpriv->target_pwr)
regulator_disable(hpriv->target_pwr);
-@@ -186,14 +203,20 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_resources);
+@@ -186,14 +204,20 @@ EXPORT_SYMBOL_GPL(ahci_platform_enable_r
*
* This function disables all ahci_platform managed resources in
* the following order:
ahci_platform_disable_clks(hpriv);
if (hpriv->target_pwr)
-@@ -222,6 +245,7 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
+@@ -206,6 +230,11 @@ static void ahci_platform_put_resources(
+ struct ahci_host_priv *hpriv = res;
+ int c;
+
++ if (hpriv->got_runtime_pm) {
++ pm_runtime_put_sync(dev);
++ pm_runtime_disable(dev);
++ }
++
+ for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
+ clk_put(hpriv->clks[c]);
+ }
+@@ -222,6 +251,7 @@ static void ahci_platform_put_resources(
* 2) regulator for controlling the targets power (optional)
* 3) 0 - AHCI_MAX_CLKS clocks, as specified in the devs devicetree node,
* or for non devicetree enabled platforms a single clock
*
* LOCKING:
* None.
-@@ -283,6 +307,25 @@ struct ahci_host_priv *ahci_platform_get_resources(
+@@ -283,6 +313,29 @@ struct ahci_host_priv *ahci_platform_get
hpriv->clks[i] = clk;
}
+ }
+ }
+
- devres_remove_group(dev, NULL);
- return hpriv;
-
---
-2.0.3
-
-From 22d93de35a39507bcdf0c62c5e1fab0625f7c6f6 Mon Sep 17 00:00:00 2001
-From: Roger Quadros <rogerq@ti.com>
-Date: Wed, 9 Oct 2013 15:08:59 +0300
-Subject: [PATCH] ata: ahci_platform: runtime resume the device before use
-
-On OMAP platforms the device needs to be runtime resumed before
-it can be accessed. The OMAP HWMOD framework takes care of
-enabling the module and its resources based on the
-device's runtime PM state.
-
-In this patch we runtime resume during .probe() and runtime suspend
-after .remove().
-
-We also update the runtime PM state during .resume().
-
-CC: Balaji T K <balajitk@ti.com>
-Signed-off-by: Roger Quadros <rogerq@ti.com>
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci.h | 1 +
- drivers/ata/ahci_platform.c | 15 +++++++++++++++
- 2 files changed, 16 insertions(+)
-
-diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
-index 3ab7ac9..51af275b 100644
---- a/drivers/ata/ahci.h
-+++ b/drivers/ata/ahci.h
-@@ -324,6 +324,7 @@ struct ahci_host_priv {
- u32 em_loc; /* enclosure management location */
- u32 em_buf_sz; /* EM buffer size in byte */
- u32 em_msg_type; /* EM message type */
-+ bool got_runtime_pm; /* Did we do pm_runtime_get? */
- struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
- struct regulator *target_pwr; /* Optional */
- struct phy *phy; /* If platform uses phy */
-diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
-index 99d38c1..75698a4 100644
---- a/drivers/ata/ahci_platform.c
-+++ b/drivers/ata/ahci_platform.c
-@@ -24,6 +24,7 @@
- #include <linux/libata.h>
- #include <linux/ahci_platform.h>
- #include <linux/phy/phy.h>
-+#include <linux/pm_runtime.h>
- #include "ahci.h"
-
- static void ahci_host_stop(struct ata_host *host);
-@@ -229,6 +230,11 @@ static void ahci_platform_put_resources(struct device *dev, void *res)
- struct ahci_host_priv *hpriv = res;
- int c;
-
-+ if (hpriv->got_runtime_pm) {
-+ pm_runtime_put_sync(dev);
-+ pm_runtime_disable(dev);
-+ }
-+
- for (c = 0; c < AHCI_MAX_CLKS && hpriv->clks[c]; c++)
- clk_put(hpriv->clks[c]);
- }
-@@ -326,6 +332,10 @@ struct ahci_host_priv *ahci_platform_get_resources(
- }
- }
-
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+ hpriv->got_runtime_pm = true;
devres_remove_group(dev, NULL);
return hpriv;
-@@ -635,6 +645,11 @@ int ahci_platform_resume(struct device *dev)
+@@ -592,6 +645,11 @@ int ahci_platform_resume(struct device *
if (rc)
goto disable_resources;
return 0;
disable_resources:
---
-2.0.3
-
-From 22cccaf7a29b2a9d8a1440d089f399a6d2432b81 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sun, 23 Feb 2014 11:37:17 +0100
-Subject: [PATCH] ahci_sunxi: Use msleep instead of mdelay
-
-ahci_sunxi_phy_init is called from the probe and resume code paths, and
-sleeping is safe in both, so use msleep instead of mdelay.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/ata/ahci_sunxi.c | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/ata/ahci_sunxi.c b/drivers/ata/ahci_sunxi.c
-index 001f7dfc..d1bf3f7 100644
+@@ -609,6 +667,7 @@ static const struct of_device_id ahci_of
+ { .compatible = "snps,spear-ahci", },
+ { .compatible = "snps,exynos5440-ahci", },
+ { .compatible = "ibm,476gtr-ahci", },
++ { .compatible = "snps,dwc-ahci", },
+ {},
+ };
+ MODULE_DEVICE_TABLE(of, ahci_of_match);
+--- a/drivers/ata/ahci.h
++++ b/drivers/ata/ahci.h
+@@ -37,6 +37,7 @@
+
+ #include <linux/clk.h>
+ #include <linux/libata.h>
++#include <linux/phy/phy.h>
+ #include <linux/regulator/consumer.h>
+
+ /* Enclosure Management Control */
+@@ -324,8 +325,10 @@ struct ahci_host_priv {
+ u32 em_loc; /* enclosure management location */
+ u32 em_buf_sz; /* EM buffer size in byte */
+ u32 em_msg_type; /* EM message type */
++ bool got_runtime_pm; /* Did we do pm_runtime_get? */
+ struct clk *clks[AHCI_MAX_CLKS]; /* Optional */
+ struct regulator *target_pwr; /* Optional */
++ struct phy *phy; /* If platform uses phy */
+ void *plat_data; /* Other platform data */
+ /*
+ * Optional ahci_start_engine override, if not set this gets set to the
--- a/drivers/ata/ahci_sunxi.c
+++ b/drivers/ata/ahci_sunxi.c
-@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+@@ -90,7 +90,7 @@ static int ahci_sunxi_phy_init(struct de
/* This magic is from the original code */
writel(0, reg_base + AHCI_RWCR);
sunxi_setbits(reg_base + AHCI_PHYCS1R, BIT(19));
sunxi_clrsetbits(reg_base + AHCI_PHYCS0R,
-@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+@@ -105,7 +105,7 @@ static int ahci_sunxi_phy_init(struct de
(0x7 << 20), (0x3 << 20));
sunxi_clrsetbits(reg_base + AHCI_PHYCS2R,
(0x1f << 5), (0x19 << 5));
sunxi_setbits(reg_base + AHCI_PHYCS0R, (0x1 << 19));
-@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct device *dev, void __iomem *reg_base)
+@@ -137,7 +137,7 @@ static int ahci_sunxi_phy_init(struct de
udelay(1);
} while (1);
writel(0x7, reg_base + AHCI_RWCR);
---
-2.0.3
-
2 files changed, 162 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/usb-ohci.txt
-diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-new file mode 100644
-index 0000000..6ba38d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-@@ -0,0 +1,22 @@
+@@ -0,0 +1,25 @@
+USB OHCI controllers
+
+Required properties:
-+- compatible : "usb-ohci"
++- compatible : "generic-ohci"
+- reg : ohci controller register range (address and length)
+- interrupts : ohci controller interrupt
+
+Optional properties:
++- big-endian-regs : boolean, set this for hcds with big-endian registers
++- big-endian-desc : boolean, set this for hcds with big-endian descriptors
++- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
+- clocks : a list of phandle + clock specifier pairs
+- phys : phandle + phy specifier pair
+- phy-names : "usb"
+Example:
+
+ ohci0: usb@01c14400 {
-+ compatible = "allwinner,sun4i-a10-ohci", "usb-ohci";
++ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+ reg = <0x01c14400 0x100>;
+ interrupts = <64>;
+ clocks = <&usb_clk 6>, <&ahb_gates 2>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ };
-diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
-index 68f674c..49304dd 100644
--- a/drivers/usb/host/ohci-platform.c
+++ b/drivers/usb/host/ohci-platform.c
@@ -3,6 +3,7 @@
static const char hcd_name[] = "ohci-platform";
-@@ -48,11 +59,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd)
+@@ -48,11 +59,67 @@ static int ohci_platform_reset(struct us
return ohci_setup(hcd);
}
};
static int ohci_platform_probe(struct platform_device *dev)
-@@ -60,17 +127,23 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -60,17 +127,24 @@ static int ohci_platform_probe(struct pl
struct usb_hcd *hcd;
struct resource *res_mem;
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
- return -ENODEV;
- }
+ struct ohci_platform_priv *priv;
++ struct ohci_hcd *ohci;
+ int err, irq, clk = 0;
if (usb_disabled())
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "no irq provided");
-@@ -83,17 +156,40 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -83,17 +157,66 @@ static int ohci_platform_probe(struct pl
return -ENXIO;
}
+ platform_set_drvdata(dev, hcd);
+ dev->dev.platform_data = pdata;
+ priv = hcd_to_ohci_priv(hcd);
++ ohci = hcd_to_ohci(hcd);
+
+ if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
++ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
++ ohci->flags |= OHCI_QUIRK_BE_MMIO;
++
++ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
++ ohci->flags |= OHCI_QUIRK_BE_DESC;
++
++ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
++ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
++
++#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
++ if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
++ dev_err(&dev->dev,
++ "Error big-endian-regs not compiled in\n");
++ err = -EINVAL;
++ goto err_put_hcd;
++ }
++#endif
++#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
++ if (ohci->flags & OHCI_QUIRK_BE_DESC) {
++ dev_err(&dev->dev,
++ "Error big-endian-desc not compiled in\n");
++ err = -EINVAL;
++ goto err_put_hcd;
++ }
++#endif
+ priv->phy = devm_phy_get(&dev->dev, "usb");
+ if (IS_ERR(priv->phy)) {
+ err = PTR_ERR(priv->phy);
}
hcd->rsrc_start = res_mem->start;
-@@ -102,11 +198,11 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -102,11 +225,11 @@ static int ohci_platform_probe(struct pl
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
device_wakeup_enable(hcd->self.controller);
-@@ -114,11 +210,17 @@ static int ohci_platform_probe(struct platform_device *dev)
+@@ -114,11 +237,17 @@ static int ohci_platform_probe(struct pl
return err;
return err;
}
-@@ -127,13 +229,22 @@ static int ohci_platform_remove(struct platform_device *dev)
+@@ -127,13 +256,22 @@ static int ohci_platform_remove(struct p
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
return 0;
}
-@@ -180,6 +291,12 @@ static int ohci_platform_resume(struct device *dev)
+@@ -180,6 +318,12 @@ static int ohci_platform_resume(struct d
#define ohci_platform_resume NULL
#endif /* CONFIG_PM */
+static const struct of_device_id ohci_platform_ids[] = {
-+ { .compatible = "usb-ohci", },
++ { .compatible = "generic-ohci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ohci_platform_ids);
static const struct platform_device_id ohci_platform_table[] = {
{ "ohci-platform", 0 },
{ }
-@@ -200,6 +317,7 @@ static struct platform_driver ohci_platform_driver = {
+@@ -200,6 +344,7 @@ static struct platform_driver ohci_platf
.owner = THIS_MODULE,
.name = "ohci-platform",
.pm = &ohci_platform_pm_ops,
}
};
---
-2.0.3
-
-From 8c4b97ea8b66e0fc8bdf648675e6889ce48c5ea7 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 21 Jan 2014 16:05:47 +0100
-Subject: [PATCH] ohci-platform: Add support for controllers with big-endian
- regs / descriptors
-
-Note this commit uses the same devicetree booleans for this as the ones
-already existing in the usb-ehci bindings, see:
-Documentation/devicetree/bindings/usb/usb-ehci.txt
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- Documentation/devicetree/bindings/usb/usb-ohci.txt | 3 +++
- drivers/usb/host/ohci-platform.c | 27 ++++++++++++++++++++++
- 2 files changed, 30 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-index 6ba38d9..6933b0c 100644
---- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-@@ -6,6 +6,9 @@ Required properties:
- - interrupts : ohci controller interrupt
-
- Optional properties:
-+- big-endian-regs : boolean, set this for hcds with big-endian registers
-+- big-endian-desc : boolean, set this for hcds with big-endian descriptors
-+- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
- - clocks : a list of phandle + clock specifier pairs
- - phys : phandle + phy specifier pair
- - phy-names : "usb"
-diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
-index 49304dd..e2c28fd 100644
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -128,6 +128,7 @@ static int ohci_platform_probe(struct platform_device *dev)
- struct resource *res_mem;
- struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev);
- struct ohci_platform_priv *priv;
-+ struct ohci_hcd *ohci;
- int err, irq, clk = 0;
-
- if (usb_disabled())
-@@ -164,8 +165,34 @@ static int ohci_platform_probe(struct platform_device *dev)
- platform_set_drvdata(dev, hcd);
- dev->dev.platform_data = pdata;
- priv = hcd_to_ohci_priv(hcd);
-+ ohci = hcd_to_ohci(hcd);
-
- if (pdata == &ohci_platform_defaults && dev->dev.of_node) {
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
-+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
-+ ohci->flags |= OHCI_QUIRK_BE_DESC;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
-+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
-+
-+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
-+ if (ohci->flags & OHCI_QUIRK_BE_MMIO) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-regs not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
-+#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
-+ if (ohci->flags & OHCI_QUIRK_BE_DESC) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-desc not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
- priv->phy = devm_phy_get(&dev->dev, "usb");
- if (IS_ERR(priv->phy)) {
- err = PTR_ERR(priv->phy);
---
-2.0.3
-
-From ddf77eb2ec72a3676dabe17baf6e3b32ce0542e5 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Feb 2014 11:27:29 +0100
-Subject: [PATCH] ohci-platform: Change compatible string from usb-ohci to
- generic-ohci
-
-The initial versions of the devicetree enablement patches for ohci-platform
-used "ohci-platform" as compatible string. However this was disliked by various
-reviewers because the platform bus is a Linux invention and devicetree is
-supposed to be OS agnostic. After much discussion I gave up and went with
-the generic usb-ohci as requested.
-
-In retro-spect I should have chosen something different, the dts files for many
-existing boards already claim to be compatible with "usb-ohci", ie they have:
-
- compatible = "ti,ohci-omap3", "usb-ohci";
-
-In theory this should not be a problem since the "ti,ohci-omap3" entry takes
-presedence, but in practice using a conflicting compatible string is an issue,
-because it makes which driver gets used depend on driver registration order.
-
-This patch changes the compatible string claimed by ohci-platform to
-"generic-ohci", avoiding the driver registration / module loading ordering
-problems.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- Documentation/devicetree/bindings/usb/usb-ohci.txt | 4 ++--
- drivers/usb/host/ohci-platform.c | 2 +-
- 2 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-index 6933b0c..45f67d9 100644
---- a/Documentation/devicetree/bindings/usb/usb-ohci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt
-@@ -1,7 +1,7 @@
- USB OHCI controllers
-
- Required properties:
--- compatible : "usb-ohci"
-+- compatible : "generic-ohci"
- - reg : ohci controller register range (address and length)
- - interrupts : ohci controller interrupt
-
-@@ -16,7 +16,7 @@ Optional properties:
- Example:
-
- ohci0: usb@01c14400 {
-- compatible = "allwinner,sun4i-a10-ohci", "usb-ohci";
-+ compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
- reg = <0x01c14400 0x100>;
- interrupts = <64>;
- clocks = <&usb_clk 6>, <&ahb_gates 2>;
-diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c
-index e2c28fd..b6ca0b2 100644
---- a/drivers/usb/host/ohci-platform.c
-+++ b/drivers/usb/host/ohci-platform.c
-@@ -319,7 +319,7 @@ static int ohci_platform_resume(struct device *dev)
- #endif /* CONFIG_PM */
-
- static const struct of_device_id ohci_platform_ids[] = {
-- { .compatible = "usb-ohci", },
-+ { .compatible = "generic-ohci", },
- { }
- };
- MODULE_DEVICE_TABLE(of, ohci_platform_ids);
---
-2.0.3
-
delete mode 100644 Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
delete mode 100644 Documentation/devicetree/bindings/usb/vt8500-ehci.txt
-diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-index fa18612..2c1aeeb 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-@@ -7,13 +7,14 @@ Required properties:
+@@ -1,19 +1,20 @@
+ USB EHCI controllers
+
+ Required properties:
+- - compatible : should be "usb-ehci".
++ - compatible : should be "generic-ehci".
+ - reg : should contain at least address and length of the standard EHCI
+ register set for the device. Optional platform-dependent registers
(debug-port or other) can be also specified here, but only after
definition of standard EHCI registers.
- interrupts : one EHCI interrupt should be described here.
+
+Example (Allwinner sun4i A10 SoC):
+ ehci0: usb@01c14000 {
-+ compatible = "allwinner,sun4i-a10-ehci", "usb-ehci";
++ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
+ reg = <0x01c14000 0x100>;
+ interrupts = <39>;
+ clocks = <&ahb_gates 1>;
+ phys = <&usbphy 1>;
+ phy-names = "usb";
+ };
-diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
-deleted file mode 100644
-index 17b3ad1..0000000
--- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt
+++ /dev/null
@@ -1,15 +0,0 @@
- reg = <0xd8007900 0x200>;
- interrupts = <43>;
- };
-diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
-deleted file mode 100644
-index 5fb8fd6..0000000
--- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt
+++ /dev/null
@@ -1,12 +0,0 @@
- reg = <0xD8007100 0x200>;
- interrupts = <1>;
-};
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index a9707da..e28cbe0 100644
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -255,6 +255,7 @@ config USB_EHCI_ATH79
-
- config USB_EHCI_HCD_PLATFORM
- tristate "Generic EHCI driver for a platform device"
-+ depends on !PPC_OF
- default n
- ---help---
- Adds an EHCI host driver for a generic platform device, which
-diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
-index 01536cf..5ebd0b7 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -3,6 +3,7 @@
static const char hcd_name[] = "ehci-platform";
-@@ -64,38 +74,90 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
+@@ -45,8 +55,10 @@ static int ehci_platform_reset(struct us
+
+ hcd->has_tt = pdata->has_tt;
+ ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
+- ehci->big_endian_desc = pdata->big_endian_desc;
+- ehci->big_endian_mmio = pdata->big_endian_mmio;
++ if (pdata->big_endian_desc)
++ ehci->big_endian_desc = 1;
++ if (pdata->big_endian_mmio)
++ ehci->big_endian_mmio = 1;
+ ehci->ignore_oc = pdata->ignore_oc;
+
+ if (pdata->pre_setup) {
+@@ -65,38 +77,91 @@ static int ehci_platform_reset(struct us
return 0;
}
- int err;
+ struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
+ struct ehci_platform_priv *priv;
++ struct ehci_hcd *ehci;
+ int err, irq, clk = 0;
if (usb_disabled())
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "no irq provided");
-@@ -107,17 +169,40 @@ static int ehci_platform_probe(struct platform_device *dev)
+@@ -108,17 +173,66 @@ static int ehci_platform_probe(struct pl
return -ENXIO;
}
+ platform_set_drvdata(dev, hcd);
+ dev->dev.platform_data = pdata;
+ priv = hcd_to_ehci_priv(hcd);
++ ehci = hcd_to_ehci(hcd);
+
+ if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
++ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
++ ehci->big_endian_mmio = 1;
++
++ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
++ ehci->big_endian_desc = 1;
++
++ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
++ ehci->big_endian_mmio = ehci->big_endian_desc = 1;
++
++#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
++ if (ehci->big_endian_mmio) {
++ dev_err(&dev->dev,
++ "Error big-endian-regs not compiled in\n");
++ err = -EINVAL;
++ goto err_put_hcd;
++ }
++#endif
++#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
++ if (ehci->big_endian_desc) {
++ dev_err(&dev->dev,
++ "Error big-endian-desc not compiled in\n");
++ err = -EINVAL;
++ goto err_put_hcd;
++ }
++#endif
+ priv->phy = devm_phy_get(&dev->dev, "usb");
+ if (IS_ERR(priv->phy)) {
+ err = PTR_ERR(priv->phy);
}
hcd->rsrc_start = res_mem->start;
-@@ -126,22 +211,28 @@ static int ehci_platform_probe(struct platform_device *dev)
+@@ -127,22 +241,28 @@ static int ehci_platform_probe(struct pl
hcd->regs = devm_ioremap_resource(&dev->dev, res_mem);
if (IS_ERR(hcd->regs)) {
err = PTR_ERR(hcd->regs);
return err;
}
-@@ -150,13 +241,19 @@ static int ehci_platform_remove(struct platform_device *dev)
+@@ -151,13 +271,19 @@ static int ehci_platform_remove(struct p
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
if (pdata == &ehci_platform_defaults)
dev->dev.platform_data = NULL;
-@@ -207,8 +304,10 @@ static int ehci_platform_resume(struct device *dev)
+@@ -208,8 +334,10 @@ static int ehci_platform_resume(struct d
static const struct of_device_id vt8500_ehci_ids[] = {
{ .compatible = "via,vt8500-ehci", },
{ .compatible = "wm,prizm-ehci", },
-+ { .compatible = "usb-ehci", },
++ { .compatible = "generic-ehci", },
{}
};
+MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
static const struct platform_device_id ehci_platform_table[] = {
{ "ehci-platform", 0 },
---
-2.0.3
-
-From 91fc5f6e5e90d412a6778efbe05e5306a1df5032 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 21 Jan 2014 16:20:53 +0100
-Subject: [PATCH] ehci-platform: Add support for controllers with big-endian
- regs / descriptors
-
-This uses the already documented devicetree booleans for this, see:
-Documentation/devicetree/bindings/usb/usb-ehci.txt
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- drivers/usb/host/ehci-platform.c | 33 +++++++++++++++++++++++++++++++--
- 1 file changed, 31 insertions(+), 2 deletions(-)
-
-diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
-index 5ebd0b7..8fde649 100644
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -55,8 +55,10 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
-
- hcd->has_tt = pdata->has_tt;
- ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug;
-- ehci->big_endian_desc = pdata->big_endian_desc;
-- ehci->big_endian_mmio = pdata->big_endian_mmio;
-+ if (pdata->big_endian_desc)
-+ ehci->big_endian_desc = 1;
-+ if (pdata->big_endian_mmio)
-+ ehci->big_endian_mmio = 1;
- ehci->ignore_oc = pdata->ignore_oc;
-
- if (pdata->pre_setup) {
-@@ -142,6 +144,7 @@ static int ehci_platform_probe(struct platform_device *dev)
- struct resource *res_mem;
- struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev);
- struct ehci_platform_priv *priv;
-+ struct ehci_hcd *ehci;
- int err, irq, clk = 0;
-
- if (usb_disabled())
-@@ -177,8 +180,34 @@ static int ehci_platform_probe(struct platform_device *dev)
- platform_set_drvdata(dev, hcd);
- dev->dev.platform_data = pdata;
- priv = hcd_to_ehci_priv(hcd);
-+ ehci = hcd_to_ehci(hcd);
-
- if (pdata == &ehci_platform_defaults && dev->dev.of_node) {
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-regs"))
-+ ehci->big_endian_mmio = 1;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian-desc"))
-+ ehci->big_endian_desc = 1;
-+
-+ if (of_property_read_bool(dev->dev.of_node, "big-endian"))
-+ ehci->big_endian_mmio = ehci->big_endian_desc = 1;
-+
-+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
-+ if (ehci->big_endian_mmio) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-regs not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
-+#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC
-+ if (ehci->big_endian_desc) {
-+ dev_err(&dev->dev,
-+ "Error big-endian-desc not compiled in\n");
-+ err = -EINVAL;
-+ goto err_put_hcd;
-+ }
-+#endif
- priv->phy = devm_phy_get(&dev->dev, "usb");
- if (IS_ERR(priv->phy)) {
- err = PTR_ERR(priv->phy);
---
-2.0.3
-
-From 4a1ce69fa8c4595483493cd7df21c66dbcca1307 Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Tue, 11 Feb 2014 11:46:13 +0100
-Subject: [PATCH] ehci-platform: Change compatible string from usb-ehci to
- generic-ehci
-
-The initial versions of the devicetree enablement patches for ehci-platform
-used "ehci-platform" as compatible string. However this was disliked by various
-reviewers because the platform bus is a Linux invention and devicetree is
-supposed to be OS agnostic. After much discussion I gave up, added a:
-"depends on !PPC_OF" to Kconfig to avoid a known conflict with PPC-OF platforms
-and went with the generic usb-ehci as requested.
-
-In retro-spect I should have chosen something different, the dts files for many
-existing boards already claim to be compatible with "usb-ehci", ie they have:
-
- compatible = "ti,ehci-omap", "usb-ehci";
-
-In theory this should not be a problem since the "ti,ehci-omap" entry takes
-presedence, but in practice using a conflicting compatible string is an issue,
-because it makes which driver gets used depend on driver registration order.
-
-This patch changes the compatible string claimed by ehci-platform to
-"generic-ehci", avoiding the driver registration / module loading ordering
-problems, and removes the "depends on !PPC_OF" workaround.
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- Documentation/devicetree/bindings/usb/usb-ehci.txt | 4 ++--
- drivers/usb/host/Kconfig | 1 -
- drivers/usb/host/ehci-platform.c | 2 +-
- 3 files changed, 3 insertions(+), 4 deletions(-)
-
-diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-index 2c1aeeb..ff151ec 100644
---- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
-+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
-@@ -1,7 +1,7 @@
- USB EHCI controllers
-
- Required properties:
-- - compatible : should be "usb-ehci".
-+ - compatible : should be "generic-ehci".
- - reg : should contain at least address and length of the standard EHCI
- register set for the device. Optional platform-dependent registers
- (debug-port or other) can be also specified here, but only after
-@@ -27,7 +27,7 @@ Example (Sequoia 440EPx):
-
- Example (Allwinner sun4i A10 SoC):
- ehci0: usb@01c14000 {
-- compatible = "allwinner,sun4i-a10-ehci", "usb-ehci";
-+ compatible = "allwinner,sun4i-a10-ehci", "generic-ehci";
- reg = <0x01c14000 0x100>;
- interrupts = <39>;
- clocks = <&ahb_gates 1>;
-diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
-index e28cbe0..a9707da 100644
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -255,7 +255,6 @@ config USB_EHCI_ATH79
-
- config USB_EHCI_HCD_PLATFORM
- tristate "Generic EHCI driver for a platform device"
-- depends on !PPC_OF
- default n
- ---help---
- Adds an EHCI host driver for a generic platform device, which
-diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
-index 8fde649..1178730 100644
---- a/drivers/usb/host/ehci-platform.c
-+++ b/drivers/usb/host/ehci-platform.c
-@@ -333,7 +333,7 @@ static int ehci_platform_resume(struct device *dev)
- static const struct of_device_id vt8500_ehci_ids[] = {
- { .compatible = "via,vt8500-ehci", },
- { .compatible = "wm,prizm-ehci", },
-- { .compatible = "usb-ehci", },
-+ { .compatible = "generic-ehci", },
- {}
- };
- MODULE_DEVICE_TABLE(of, vt8500_ehci_ids);
---
-2.0.3
-
delete mode 100644 Documentation/devicetree/bindings/usb/platform-uhci.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb-uhci.txt
-diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt
-deleted file mode 100644
-index a4fb071..0000000
--- a/Documentation/devicetree/bindings/usb/platform-uhci.txt
+++ /dev/null
@@ -1,15 +0,0 @@
- reg = <0xd8007b00 0x200>;
- interrupts = <43>;
- };
-diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt
-new file mode 100644
-index 0000000..2981334
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
@@ -0,0 +1,15 @@
+ reg = <0xd8007b00 0x200>;
+ interrupts = <43>;
+ };
-diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
-index 44e6c9d..01833ab 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
-@@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(struct platform_device *op)
+@@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(s
}
static const struct of_device_id platform_uhci_ids[] = {
{ .compatible = "platform-uhci", },
{}
};
---
-2.0.3
-
drivers/usb/host/xhci-plat.c | 1 +
2 files changed, 3 insertions(+), 2 deletions(-)
-diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
-index 5752df0..90f8f60 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -1,14 +1,14 @@
reg = <0xf0931000 0x8c8>;
interrupts = <0x0 0x4e 0x0>;
};
-diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
-index 8abda5c..8affef9 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
-@@ -226,6 +226,7 @@ static const struct dev_pm_ops xhci_plat_pm_ops = {
+@@ -226,6 +226,7 @@ static const struct dev_pm_ops xhci_plat
#ifdef CONFIG_OF
static const struct of_device_id usb_xhci_of_match[] = {
{ .compatible = "xhci-platform" },
{ },
};
---
-2.0.3
-
create mode 100644 Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
create mode 100644 drivers/phy/phy-sun4i-usb.c
-diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
-new file mode 100644
-index 0000000..a82361b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -0,0 +1,26 @@
+ resets = <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb1_reset", "usb2_reset";
+ };
-diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
-index c7a551c..66f7c4e 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -65,4 +65,15 @@ config BCM_KONA_USB2_PHY
+ parts, as well as the 2 regular USB 2 host PHYs.
+
endmenu
-diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
-index b57c253..9d4f8bb 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += p
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
+obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
-diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
-new file mode 100644
-index 0000000..e6e6c4b
--- /dev/null
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -0,0 +1,331 @@
+MODULE_DESCRIPTION("Allwinner sun4i USB phy driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL v2");
---
-2.0.3
-
create mode 100644 drivers/mmc/host/sunxi-mmc.c
create mode 100644 drivers/mmc/host/sunxi-mmc.h
-diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
-index 1384f67..7caf266 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
-@@ -689,3 +689,10 @@ config MMC_REALTEK_PCI
+@@ -714,3 +714,10 @@ config MMC_REALTEK_PCI
help
Say Y here to include driver code to support SD/MMC card interface
of Realtek PCI-E card reader
+ help
+ This selects support for the SD/MMC Host Controller on
+ Allwinner sunxi SoCs.
-diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
-index 3483b6b..f3c7c243 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
-@@ -54,6 +54,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
+@@ -55,6 +55,8 @@ obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
-diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
-new file mode 100644
-index 0000000..a16abd2
--- /dev/null
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -0,0 +1,853 @@
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("David Lanzendörfer <david.lanzendoerfer@o2s.ch>");
+MODULE_ALIAS("platform:sunxi-mmc");
-diff --git a/drivers/mmc/host/sunxi-mmc.h b/drivers/mmc/host/sunxi-mmc.h
-new file mode 100644
-index 0000000..84bab99
--- /dev/null
+++ b/drivers/mmc/host/sunxi-mmc.h
@@ -0,0 +1,238 @@
+};
+
+#endif
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 58 ++++++++++++++++++++++++++++++
3 files changed, 74 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
-index fa746aea..68b687e 100644
-diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-index 4684cbe..13088f0 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -34,6 +34,14 @@
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 27dc6ee..7014518 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -377,6 +377,50 @@
};
timer@01c20c00 {
---
-2.0.3
-
-From c0b8d688678e4a652895ce5f0cd48917a9a4f6ba Mon Sep 17 00:00:00 2001
-From: Hans de Goede <hdegoede@redhat.com>
-Date: Sat, 11 Jan 2014 04:33:23 +0100
-Subject: [PATCH] ARM: sun4i: dt: Add mmc node to a few more boards
-
-Signed-off-by: Hans de Goede <hdegoede@redhat.com>
----
- arch/arm/boot/dts/sun4i-a10-hackberry.dts | 9 +++++++++
- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 9 +++++++++
- arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 8 ++++++++
- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 9 +++++++++
- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 8 ++++++++
- 5 files changed, 43 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-index d7c17e4..a4b05d6 100644
-diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
-index fe9272e..b73a070 100644
-diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-index dd84a9e3..c906171 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -20,6 +20,14 @@
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
-diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-index 66cf0c7..e5a2765 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -33,6 +33,15 @@
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
-diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-index 255b47e..2820229 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -34,6 +34,14 @@
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 29 +++++++++++++++
5 files changed, 136 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
-index 23611b7..5bc25c7 100644
-diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
-index f34e0d8..8ba1ed7 100644
-diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
-index 11169d5..700f688 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts
@@ -21,6 +21,14 @@
led_pins_olinuxinom: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
-diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-index 7a9187b..177196c 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
-@@ -20,6 +20,14 @@
+@@ -21,6 +21,14 @@
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
soc@01c00000 {
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
status = "okay";
-@@ -34,6 +42,13 @@
+@@ -35,6 +43,13 @@
};
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index 0e9c239..6fc84a4 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -320,6 +320,28 @@
};
timer@01c20c00 {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 65 +++++++++++++++++++++++++
4 files changed, 104 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-index 68de89f..cd9d3c2 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -20,6 +20,14 @@
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index cb25d3c..66bb3ef 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -20,6 +20,14 @@
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index eeadf76..822cbe2 100644
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-@@ -31,6 +31,22 @@
+@@ -32,6 +32,22 @@
status = "okay";
};
usbphy: phy@01c13400 {
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
-@@ -65,6 +81,13 @@
+@@ -66,6 +82,13 @@
};
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 4cc2f5f..1d9b314 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -439,6 +439,50 @@
};
timer@01c20c00 {
---
-2.0.3
-
2 files changed, 209 insertions(+)
create mode 100644 drivers/irqchip/irq-sunxi-nmi.c
-diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
-index 5194afb..1c0c151 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
+@@ -12,6 +12,7 @@ obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) +=
obj-$(CONFIG_ARCH_MOXART) += irq-moxart.o
obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
-diff --git a/drivers/irqchip/irq-sunxi-nmi.c b/drivers/irqchip/irq-sunxi-nmi.c
-new file mode 100644
-index 0000000..12f547a
--- /dev/null
+++ b/drivers/irqchip/irq-sunxi-nmi.c
@@ -0,0 +1,208 @@
+ return sunxi_sc_nmi_irq_init(node, &sun7i_reg_offs);
+}
+IRQCHIP_DECLARE(sun7i_sc_nmi, "allwinner,sun7i-a20-sc-nmi", sun7i_sc_nmi_irq_init);
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
2 files changed, 16 insertions(+)
-diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
-index 8441733..74d2920 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
-@@ -421,6 +421,14 @@
+@@ -370,6 +370,14 @@
interrupts = <1 9 0xf04>;
};
cpucfg@01f01c00 {
compatible = "allwinner,sun6i-a31-cpuconfig";
reg = <0x01f01c00 0x300>;
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 4981f5e..2e66c85 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -401,6 +401,14 @@
spi0: spi@01c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
---
-2.0.3
-
create mode 100644 drivers/mfd/axp20x.c
create mode 100644 include/linux/mfd/axp20x.h
-diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
-index b5df4a5..d25660d 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -55,6 +55,7 @@ CONFIG_GPIO_SYSFS=y
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
-diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
-index 49bb445..24ba61a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -59,6 +59,18 @@ config MFD_AAT2870_CORE
config MFD_CROS_EC
tristate "ChromeOS Embedded Controller"
select MFD_CORE
-diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
-index 5aea5ef..fb773b5 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
-@@ -101,6 +101,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.o
+@@ -101,6 +101,7 @@ obj-$(CONFIG_PMIC_DA9052) += da9052-irq.
obj-$(CONFIG_PMIC_DA9052) += da9052-core.o
obj-$(CONFIG_MFD_DA9052_SPI) += da9052-spi.o
obj-$(CONFIG_MFD_DA9052_I2C) += da9052-i2c.o
obj-$(CONFIG_MFD_LP3943) += lp3943.o
obj-$(CONFIG_MFD_LP8788) += lp8788.o lp8788-irq.o
-diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
-new file mode 100644
-index 0000000..92e5b0f
--- /dev/null
+++ b/drivers/mfd/axp20x.c
@@ -0,0 +1,250 @@
+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");
-diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
-new file mode 100644
-index 0000000..fcef32c
--- /dev/null
+++ b/include/linux/mfd/axp20x.h
@@ -0,0 +1,180 @@
+};
+
+#endif /* __LINUX_MFD_AXP20X_H */
---
-2.0.3
-
4 files changed, 279 insertions(+)
create mode 100644 drivers/input/misc/axp20x-pek.c
-diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
-index d25660d..3ed7023 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -40,6 +40,8 @@ CONFIG_SUN4I_EMAC=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=8
-diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
-index 7904ab0..87244fb 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -393,6 +393,17 @@ config INPUT_RETU_PWRBUTTON
config INPUT_TWL4030_PWRBUTTON
tristate "TWL4030 Power button Driver"
depends on TWL4030_CORE
-diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
-index cda71fc..624abf5 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
-@@ -50,6 +50,7 @@ obj-$(CONFIG_INPUT_POWERMATE) += powermate.o
+@@ -50,6 +50,7 @@ obj-$(CONFIG_INPUT_POWERMATE) += powerm
obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o
obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o
obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o
obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o
obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o
obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o
-diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
-new file mode 100644
-index 0000000..799275d
--- /dev/null
+++ b/drivers/input/misc/axp20x-pek.c
@@ -0,0 +1,265 @@
+MODULE_DESCRIPTION("axp20x Power Button");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");
---
-2.0.3
-
4 files changed, 358 insertions(+)
create mode 100644 drivers/regulator/axp20x-regulator.c
-diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
-index 3ed7023..6e305da 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -72,3 +72,4 @@ CONFIG_NFS_FS=y
CONFIG_NLS=y
CONFIG_PRINTK_TIME=y
+CONFIG_REGULATOR_AXP20X=y
-diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
-index 6a79328..9f3bc48 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -139,6 +139,13 @@ config REGULATOR_AS3722
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
-diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
-index 979f9dd..1dd084a 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
+@@ -20,6 +20,7 @@ obj-$(CONFIG_REGULATOR_ANATOP) += anatop
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
-diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
-new file mode 100644
-index 0000000..9072f2f
--- /dev/null
+++ b/drivers/regulator/axp20x-regulator.c
@@ -0,0 +1,349 @@
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
---
-2.0.3
-
1 file changed, 60 insertions(+)
create mode 100644 arch/arm/boot/dts/x-powers-axp209.dtsi
-diff --git a/arch/arm/boot/dts/x-powers-axp209.dtsi b/arch/arm/boot/dts/x-powers-axp209.dtsi
-new file mode 100644
-index 0000000..118ce3a1
--- /dev/null
+++ b/arch/arm/boot/dts/x-powers-axp209.dtsi
@@ -0,0 +1,60 @@
+ regulator-max-microvolt = <3300000>;
+ };
+ };
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
-index cd9d3c2..40e9c3a 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts
@@ -74,6 +74,16 @@
};
i2c1: i2c@01c2b000 {
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 9 +++++++++
7 files changed, 81 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
-index 68b687e..99f53c0 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
-@@ -96,6 +96,15 @@
+@@ -65,6 +65,15 @@
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
};
};
-diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
-index 13088f0..5e4986c 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -88,6 +88,15 @@
};
i2c1: i2c@01c2b000 {
-diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-index a4b05d6..18f0030 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
-@@ -91,6 +91,21 @@
+@@ -82,6 +82,21 @@
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+ };
};
- reg_emac_3v3: emac-3v3 {
-diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
-index b73a070..7d3599e 100644
-diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
-index c906171..4acddf7 100644
+ regulators {
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -55,6 +55,21 @@
};
reg_usb1_vbus: usb1-vbus {
-diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
-index e5a2765..2ce7267 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -90,6 +90,21 @@
};
leds {
-diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
-index 2820229..817cdca 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -74,6 +74,15 @@
};
};
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 10 ++++++++++
2 files changed, 20 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index 9a127d1..ebf6a2f 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -137,6 +137,16 @@
+@@ -89,6 +89,16 @@
pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
+ pinctrl-0 = <&uart0_pins_a>;
status = "okay";
+
+ axp: axp20x@34 {
+ };
};
- i2c1: i2c@01c2b000 {
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
-index 15f1f3f..926f111 100644
+ gmac: ethernet@01c50000 {
--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -127,6 +127,16 @@
};
i2c1: i2c@01c2b000 {
---
-2.0.3
-
arch/arm/boot/dts/sun5i-a13.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
-index 280ffee..68ab353 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -503,6 +503,8 @@
};
timer@01c60000 {
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 2e66c85..15ea85e 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -848,6 +848,8 @@
};
gmac: ethernet@01c50000 {
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 4b90a18..2a705e7 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -712,6 +712,8 @@
};
};
};
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index 8a1009d..f9dcb61 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -33,6 +33,24 @@
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
+@@ -112,6 +112,24 @@
+ reg = <1>;
+ };
};
+
+ i2c0: i2c@01c2ac00 {
};
leds {
---
-2.0.3
-
drivers/clk/sunxi/clk-sunxi.c | 8 ++------
1 file changed, 2 insertions(+), 6 deletions(-)
-diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
-index 9afd8dd..a10a645 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
-@@ -1325,17 +1325,13 @@ static void __init sunxi_clock_protect(void)
+@@ -1325,17 +1325,13 @@ static void __init sunxi_clock_protect(v
/* memory bus clock - sun5i+ */
clk = clk_get(NULL, "mbus");
}
static void __init sunxi_init_clocks(void)
---
-2.0.3
-
net/rfkill/rfkill-gpio.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
-diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
-index bd2a5b9..97ec12a 100644
--- a/net/rfkill/rfkill-gpio.c
+++ b/net/rfkill/rfkill-gpio.c
-@@ -117,8 +117,8 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
- if (!rfkill->shutdown_name)
- return -ENOMEM;
+@@ -26,6 +26,7 @@
+ #include <linux/slab.h>
+ #include <linux/acpi.h>
+ #include <linux/gpio/consumer.h>
++#include <linux/of_gpio.h>
-- snprintf(rfkill->reset_name, len + 6 , "%s_reset", rfkill->name);
-- snprintf(rfkill->shutdown_name, len + 9, "%s_shutdown", rfkill->name);
-+ snprintf(rfkill->reset_name, len + 7 , "%s_reset", rfkill->name);
-+ snprintf(rfkill->shutdown_name, len + 10, "%s_shutdown", rfkill->name);
+ #include <linux/rfkill-gpio.h>
- rfkill->clk = devm_clk_get(&pdev->dev, clk_name);
+@@ -39,6 +40,7 @@ struct rfkill_gpio_data {
+ char *reset_name;
+ char *shutdown_name;
+ struct clk *clk;
++ int clk_frequency;
---
-2.0.3
-
-From d91c313c08167978c3fb20b327b6a7abb7b00ffd Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 17 Jan 2014 14:47:27 +0800
-Subject: [PATCH] net: rfkill: gpio: use
- clk_prepare_enable/clk_disable_unprepare
-
-rfkill-gpio calls clk_enable() without first calling clk_prepare(),
-resulting in a warning and no effect. Switch to clk_prepare_enable()
-and clk_disable_unprepare.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- net/rfkill/rfkill-gpio.c | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
-diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
-index 97ec12a..c7081b7 100644
---- a/net/rfkill/rfkill-gpio.c
-+++ b/net/rfkill/rfkill-gpio.c
-@@ -51,10 +51,10 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
+ bool clk_enabled;
+ };
+@@ -51,15 +53,15 @@ static int rfkill_gpio_set_power(void *d
gpiod_set_value(rfkill->shutdown_gpio, 0);
gpiod_set_value(rfkill->reset_gpio, 0);
if (!IS_ERR(rfkill->clk) && rfkill->clk_enabled)
gpiod_set_value(rfkill->reset_gpio, 1);
gpiod_set_value(rfkill->shutdown_gpio, 1);
}
---
-2.0.3
-
-From f6dc85e22d3215a26f509fb5b34ca34c56a0d8b4 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 17 Jan 2014 14:47:28 +0800
-Subject: [PATCH] net: rfkill: gpio: fix reversed clock enable state
-
-rfkill-gpio has clk_enabled = blocked, which is true when rfkill
-blocks the device. This results in calling clock enable/disable at
-the wrong time. Reversing the value fixes this.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- net/rfkill/rfkill-gpio.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
-index c7081b7..3084fa3 100644
---- a/net/rfkill/rfkill-gpio.c
-+++ b/net/rfkill/rfkill-gpio.c
-@@ -59,7 +59,7 @@ static int rfkill_gpio_set_power(void *data, bool blocked)
- gpiod_set_value(rfkill->shutdown_gpio, 1);
- }
- rfkill->clk_enabled = blocked;
+ rfkill->clk_enabled = !blocked;
return 0;
}
---
-2.0.3
-
-From 57301a41d4a82902e967f6bd9f09ba6ca31fcbed Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 17 Jan 2014 14:47:29 +0800
-Subject: [PATCH] net: rfkill: gpio: add device tree support
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- .../devicetree/bindings/rfkill/rfkill-gpio.txt | 26 ++++++++++++++++++++++
- net/rfkill/rfkill-gpio.c | 23 +++++++++++++++++++
- 2 files changed, 49 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
-
-diff --git a/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
-new file mode 100644
-index 0000000..8a07ea4
---- /dev/null
-+++ b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
-@@ -0,0 +1,26 @@
-+GPIO controlled RFKILL devices
-+
-+Required properties:
-+- compatible : Must be "rfkill-gpio".
-+- rfkill-name : Name of RFKILL device
-+- rfkill-type : Type of RFKILL device: 1 for WiFi, 2 for BlueTooth
-+- NAME_shutdown-gpios : GPIO phandle to shutdown control
-+ (phandle must be the second)
-+- NAME_reset-gpios : GPIO phandle to reset control
-+
-+NAME must match the rfkill-name property. NAME_shutdown-gpios or
-+NAME_reset-gpios, or both, must be defined.
-+
-+Optional properties:
-+- clocks : phandle to clock to enable/disable
-+
-+Example:
-+
-+ rfkill_bt: rfkill@0 {
-+ compatible = "rfkill-gpio";
-+ rfkill-name = "bluetooth";
-+ rfkill-type = <2>;
-+ bluetooth_shutdown-gpios = <0>, <&pio 7 18 0>;
-+ bluetooth_reset-gpios = <&pio 7 24 0>;
-+ clocks = <&clk_out_a>;
-+ };
-diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
-index 3084fa3..48381a8 100644
---- a/net/rfkill/rfkill-gpio.c
-+++ b/net/rfkill/rfkill-gpio.c
-@@ -26,6 +26,7 @@
- #include <linux/slab.h>
- #include <linux/acpi.h>
- #include <linux/gpio/consumer.h>
-+#include <linux/of_gpio.h>
-
- #include <linux/rfkill-gpio.h>
-
-@@ -83,6 +84,18 @@ static int rfkill_gpio_acpi_probe(struct device *dev,
+@@ -83,6 +85,19 @@ static int rfkill_gpio_acpi_probe(struct
return 0;
}
+ rfkill->name = np->name;
+ of_property_read_string(np, "rfkill-name", &rfkill->name);
+ of_property_read_u32(np, "rfkill-type", &rfkill->type);
++ of_property_read_u32(np, "clock-frequency", &rfkill->clk_frequency);
+
+ return 0;
+}
static int rfkill_gpio_probe(struct platform_device *pdev)
{
struct rfkill_gpio_platform_data *pdata = pdev->dev.platform_data;
-@@ -100,6 +113,10 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
+@@ -100,6 +115,10 @@ static int rfkill_gpio_probe(struct plat
ret = rfkill_gpio_acpi_probe(&pdev->dev, rfkill);
if (ret)
return ret;
} else if (pdata) {
clk_name = pdata->power_clk_name;
rfkill->name = pdata->name;
-@@ -189,6 +206,11 @@ static const struct acpi_device_id rfkill_acpi_match[] = {
+@@ -117,10 +136,12 @@ static int rfkill_gpio_probe(struct plat
+ if (!rfkill->shutdown_name)
+ return -ENOMEM;
+
+- snprintf(rfkill->reset_name, len + 6 , "%s_reset", rfkill->name);
+- snprintf(rfkill->shutdown_name, len + 9, "%s_shutdown", rfkill->name);
++ snprintf(rfkill->reset_name, len + 7 , "%s_reset", rfkill->name);
++ snprintf(rfkill->shutdown_name, len + 10, "%s_shutdown", rfkill->name);
+
+ rfkill->clk = devm_clk_get(&pdev->dev, clk_name);
++ if (!IS_ERR(rfkill->clk) && rfkill->clk_frequency > 0)
++ clk_set_rate(rfkill->clk, rfkill->clk_frequency);
+
+ gpio = devm_gpiod_get_index(&pdev->dev, rfkill->reset_name, 0);
+ if (!IS_ERR(gpio)) {
+@@ -189,6 +210,11 @@ static const struct acpi_device_id rfkil
{ },
};
static struct platform_driver rfkill_gpio_driver = {
.probe = rfkill_gpio_probe,
.remove = rfkill_gpio_remove,
-@@ -196,6 +218,7 @@ static struct platform_driver rfkill_gpio_driver = {
+@@ -196,6 +222,7 @@ static struct platform_driver rfkill_gpi
.name = "rfkill_gpio",
.owner = THIS_MODULE,
.acpi_match_table = ACPI_PTR(rfkill_acpi_match),
},
};
---
-2.0.3
-
-From 83c43937ee8c5fcb38241a8e89c2b93e5b0f9526 Mon Sep 17 00:00:00 2001
-From: Chen-Yu Tsai <wens@csie.org>
-Date: Fri, 17 Jan 2014 14:47:30 +0800
-Subject: [PATCH] net: rfkill: gpio: add clock-frequency device tree property
-
-Some devices, such as Broadcom Bluetooth devices, require a specific
-clock rate for the clock tied to the rfkill device. Add clock-frequency
-property so we can specify this from the device tree.
-
-Signed-off-by: Chen-Yu Tsai <wens@csie.org>
----
- Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt | 2 ++
- net/rfkill/rfkill-gpio.c | 4 ++++
- 2 files changed, 6 insertions(+)
-
-diff --git a/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
-index 8a07ea4..8b8db0a 100644
---- a/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
+--- /dev/null
+++ b/Documentation/devicetree/bindings/rfkill/rfkill-gpio.txt
-@@ -13,6 +13,7 @@ NAME_reset-gpios, or both, must be defined.
-
- Optional properties:
- - clocks : phandle to clock to enable/disable
+@@ -0,0 +1,28 @@
++GPIO controlled RFKILL devices
++
++Required properties:
++- compatible : Must be "rfkill-gpio".
++- rfkill-name : Name of RFKILL device
++- rfkill-type : Type of RFKILL device: 1 for WiFi, 2 for BlueTooth
++- NAME_shutdown-gpios : GPIO phandle to shutdown control
++ (phandle must be the second)
++- NAME_reset-gpios : GPIO phandle to reset control
++
++NAME must match the rfkill-name property. NAME_shutdown-gpios or
++NAME_reset-gpios, or both, must be defined.
++
++Optional properties:
++- clocks : phandle to clock to enable/disable
+- clock-frequency : clock rate to set for the given clock
-
- Example:
-
-@@ -23,4 +24,5 @@ Example:
- bluetooth_shutdown-gpios = <0>, <&pio 7 18 0>;
- bluetooth_reset-gpios = <&pio 7 24 0>;
- clocks = <&clk_out_a>;
++
++Example:
++
++ rfkill_bt: rfkill@0 {
++ compatible = "rfkill-gpio";
++ rfkill-name = "bluetooth";
++ rfkill-type = <2>;
++ bluetooth_shutdown-gpios = <0>, <&pio 7 18 0>;
++ bluetooth_reset-gpios = <&pio 7 24 0>;
++ clocks = <&clk_out_a>;
+ clock-frequency = <32678>;
- };
-diff --git a/net/rfkill/rfkill-gpio.c b/net/rfkill/rfkill-gpio.c
-index 48381a8..3092681 100644
---- a/net/rfkill/rfkill-gpio.c
-+++ b/net/rfkill/rfkill-gpio.c
-@@ -40,6 +40,7 @@ struct rfkill_gpio_data {
- char *reset_name;
- char *shutdown_name;
- struct clk *clk;
-+ int clk_frequency;
-
- bool clk_enabled;
- };
-@@ -92,6 +93,7 @@ static int rfkill_gpio_dt_probe(struct device *dev,
- rfkill->name = np->name;
- of_property_read_string(np, "rfkill-name", &rfkill->name);
- of_property_read_u32(np, "rfkill-type", &rfkill->type);
-+ of_property_read_u32(np, "clock-frequency", &rfkill->clk_frequency);
-
- return 0;
- }
-@@ -138,6 +140,8 @@ static int rfkill_gpio_probe(struct platform_device *pdev)
- snprintf(rfkill->shutdown_name, len + 10, "%s_shutdown", rfkill->name);
-
- rfkill->clk = devm_clk_get(&pdev->dev, clk_name);
-+ if (!IS_ERR(rfkill->clk) && rfkill->clk_frequency > 0)
-+ clk_set_rate(rfkill->clk, rfkill->clk_frequency);
-
- gpio = devm_gpiod_get_index(&pdev->dev, rfkill->reset_name, 0);
- if (!IS_ERR(gpio)) {
---
-2.0.3
-
++ };
drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
-diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-index fa35b23..bd19323 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c
-@@ -827,7 +827,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev *sdiodev, bool write, u32 address,
+@@ -827,7 +827,7 @@ brcmf_sdiod_ramrw(struct brcmf_sdio_dev
}
if (!write)
memcpy(data, pkt->data, dsize);
/* Adjust for next transfer (if any) */
size -= dsize;
---
-2.0.3
-
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
-diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
-index ddaa9ef..e006e7c 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
-@@ -1955,7 +1955,7 @@ static int brcmf_sdio_txpkt_prep_sg(struct brcmf_sdio *bus,
+@@ -1955,7 +1955,7 @@ static int brcmf_sdio_txpkt_prep_sg(stru
memcpy(pkt_pad->data,
pkt->data + pkt->len - tail_chop,
tail_chop);
skb_trim(pkt, pkt->len - tail_chop);
skb_trim(pkt_pad, tail_pad + tail_chop);
__skb_queue_after(pktq, pkt, pkt_pad);
-@@ -2003,7 +2003,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
+@@ -2003,7 +2003,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio
* already properly aligned and does not
* need an sdpcm header.
*/
continue;
/* align packet data pointer */
-@@ -2067,11 +2067,11 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
+@@ -2067,11 +2067,11 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio
u8 *hdr;
u32 dat_offset;
u16 tail_pad;
if (dummy_flags & ALIGN_SKB_FLAG) {
chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK;
if (chop_len) {
-@@ -2554,6 +2554,8 @@ static int brcmf_sdio_bus_txdata(struct device *dev, struct sk_buff *pkt)
+@@ -2554,6 +2554,8 @@ static int brcmf_sdio_bus_txdata(struct
/* Priority based enq */
spin_lock_irqsave(&bus->txqlock, flags);
if (!brcmf_c_prec_enq(bus->sdiodev->dev, &bus->txq, pkt, prec)) {
skb_pull(pkt, bus->tx_hdrlen);
brcmf_err("out of bus->txq !!!\n");
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 47 ++++++++++++++++++++++++++++++
1 file changed, 47 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index 66bb3ef..2444806 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -28,6 +28,23 @@
ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 {
allwinner,pins = "PH12";
allwinner,function = "gpio_out";
-@@ -69,6 +98,13 @@
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+@@ -83,6 +112,13 @@
+ allwinner,drive = <0>;
+ allwinner,pull = <2>;
};
+
+ wifi_host_wake_pin: wifi_host_wake_pin@0 {
};
uart0: serial@01c28000 {
-@@ -147,4 +183,15 @@
+@@ -171,4 +207,15 @@
reg_usb2_vbus: usb2-vbus {
status = "okay";
};
+ gpio = <&pio 7 9 0>;
+ };
};
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-index 2444806..9a127d1 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
-@@ -105,6 +105,20 @@
+@@ -119,6 +119,20 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
};
uart0: serial@01c28000 {
-@@ -113,6 +127,12 @@
- status = "okay";
+@@ -149,6 +163,12 @@
+ };
};
+ uart2: serial@01c28800 {
i2c0: i2c@01c2ac00 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
-@@ -194,4 +214,20 @@
+@@ -218,4 +238,20 @@
enable-active-high;
gpio = <&pio 7 9 0>;
};
+ };
+ };
};
---
-2.0.3
-
-diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
-index 5b34ff29ea38..178b017be827 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
-@@ -217,6 +217,15 @@ config PWM_SPEAR
+@@ -187,6 +187,15 @@ config PWM_SPEAR
To compile this driver as a module, choose M here: the module
will be called pwm-spear.
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
depends on ARCH_TEGRA
-diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
-index e57d2c38a794..39997ea2e276 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
+@@ -16,6 +16,7 @@ obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
obj-$(CONFIG_PWM_RENESAS_TPU) += pwm-renesas-tpu.o
obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o
obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o
obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o
obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o
obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o
-diff --git a/drivers/pwm/pwm-sunxi.c b/drivers/pwm/pwm-sunxi.c
-new file mode 100644
-index 000000000000..e7c3ca1d3c42
--- /dev/null
+++ b/drivers/pwm/pwm-sunxi.c
@@ -0,0 +1,338 @@
arch/arm/boot/dts/sun4i-a10.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index fe845eb..8810ce4 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -477,6 +477,20 @@
+@@ -521,6 +521,20 @@
#size-cells = <0>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index f9f5e0c..2eaf7c0f 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -554,6 +554,20 @@
+@@ -584,6 +584,20 @@
#size-cells = <0>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
---
-2.0.3
-
arch/arm/boot/dts/sun4i-a10.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
-diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
-index 8810ce4..4dc3761 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
-@@ -563,6 +563,14 @@
- interrupts = <24>;
+@@ -628,6 +628,14 @@
+ status = "disabled";
};
+ pwm: pwm@01c20e00 {
+ };
+
sid: eeprom@01c23800 {
- compatible = "allwinner,sun4i-a10-sid";
+ compatible = "allwinner,sun4i-sid";
reg = <0x01c23800 0x10>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 2eaf7c0f..61a4b5e 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
-@@ -706,6 +706,14 @@
- interrupts = <0 24 4>;
+@@ -764,6 +764,14 @@
+ status = "disabled";
};
+ pwm: pwm@01c20e00 {
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
---
-2.0.3
-
arch/arm/boot/dts/sun7i-a20.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 9dd904d..f9f5e0c 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -57,6 +57,12 @@
clocks {
#address-cells = <1>;
#size-cells = <1>;
---
-2.0.3
-
-diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
-index 6acdbdf..19b1ced 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -529,6 +529,14 @@
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
---
-1.8.5.5
-
-
\ No newline at end of file
-diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
-index 03ccdb0..a2acda4 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
-@@ -418,4 +418,21 @@ config CRYPTO_DEV_MXS_DCP
+@@ -419,4 +419,21 @@ config CRYPTO_DEV_MXS_DCP
To compile this driver as a module, choose M here: the module
will be called mxs-dcp.
+ will be called sunxi-ss.
+
endif # CRYPTO_HW
-diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
-index 482f090..855292a 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
-@@ -23,3 +23,4 @@ obj-$(CONFIG_CRYPTO_DEV_S5P) += s5p-sss.o
- obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
+@@ -23,3 +23,4 @@ obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahar
obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o
+ obj-$(CONFIG_CRYPTO_DEV_TEGRA_AES) += tegra-aes.o
obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/
-diff --git a/drivers/crypto/sunxi-ss/Makefile b/drivers/crypto/sunxi-ss/Makefile
-new file mode 100644
-index 0000000..8bb287d
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o
+sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o
-diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
-new file mode 100644
-index 0000000..c2422f7
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c
@@ -0,0 +1,461 @@
+ memcpy(op->key, key, keylen);
+ return 0;
+}
-diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-core.c b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
-new file mode 100644
-index 0000000..c76016e
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c
@@ -0,0 +1,308 @@
+MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>");
-diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-hash.c b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
-new file mode 100644
-index 0000000..6412bfb
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c
@@ -0,0 +1,241 @@
+
+ return sunxi_hash_final(areq);
+}
-diff --git a/drivers/crypto/sunxi-ss/sunxi-ss.h b/drivers/crypto/sunxi-ss/sunxi-ss.h
-new file mode 100644
-index 0000000..94aca20
--- /dev/null
+++ b/drivers/crypto/sunxi-ss/sunxi-ss.h
@@ -0,0 +1,183 @@
+ unsigned int keylen);
+int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key,
+ unsigned int keylen);
---
-1.8.5.5
-
-
\ No newline at end of file
2 files changed, 121 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 6967393..b1b59ea 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
-@@ -353,7 +353,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- sun6i-a31-colombus.dtb \
+@@ -292,7 +292,8 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
+ sun6i-a31-colombus.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
- sun7i-a20-olinuxino-micro.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
-diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
-new file mode 100644
-index 0000000..fc6a542
---
-2.0.3
-
-diff -ruN old/arch/arm/boot/dts/sun7i-a20-pcduino3.dts new/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
---- old/arch/arm/boot/dts/sun7i-a20-pcduino3.dts 2014-08-01 21:28:06.000000000 +0200
-+++ new/arch/arm/boot/dts/sun7i-a20-pcduino3.dts 2014-08-03 16:52:51.621238166 +0200
+--- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
++++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts
@@ -12,8 +12,7 @@
/dts-v1/;
-diff -ruN old/arch/arm/boot/dts/Makefile new/arch/arm/boot/dts/Makefile
---- old/arch/arm/boot/dts/Makefile 2014-08-03 22:59:45.000000000 +0200
-+++ new/arch/arm/boot/dts/Makefile 2014-08-03 23:12:30.208474257 +0200
-@@ -290,6 +290,7 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -290,6 +290,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
sun5i-a13-olinuxino.dtb \
sun5i-a13-olinuxino-micro.dtb \
sun6i-a31-colombus.dtb \
-diff -ruN old/arch/arm/boot/dts/sun7i-a20-bananapi.dts new/arch/arm/boot/dts/sun7i-a20-bananapi.dts
---- old/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2014-08-01 21:28:06.000000000 +0200
-+++ new/arch/arm/boot/dts/sun7i-a20-bananapi.dts 2014-08-04 00:49:24.552906049 +0200
+--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
++++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -12,8 +12,7 @@
/dts-v1/;
FEATURES:=ext4 audio
MAINTAINER:=Florian Fainelli <florian@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
include $(INCLUDE_DIR)/target.mk
FEATURES:=ext4 vdi vmdk targz
MAINTAINER:=Imre Kaloz <kaloz@openwrt.org>
-LINUX_VERSION:=3.14.16
+LINUX_VERSION:=3.14.18
KERNELNAME:=bzImage
projects / openwrt / svn-archive / archive.git / commitdiff