base-files: some /lib/network/config.sh refactoring
authorFelix Fietkau <nbd@openwrt.org>
Fri, 7 Aug 2009 00:08:06 +0000 (00:08 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Fri, 7 Aug 2009 00:08:06 +0000 (00:08 +0000)
* Localize a lot more variables than before.
* Do stuff or localize variables at later points or inner blocks
  so less commands are executed in some cases.
* Use the default option of config_get where it makes sense.

Signed-off-by: Malte S. Stretz <mss@apache.org>
SVN-Revision: 17160

package/base-files/files/lib/network/config.sh

index 1bbe623..a5cadf6 100755 (executable)
@@ -24,8 +24,7 @@ find_config() {
 }
 
 scan_interfaces() {
-       local cfgfile="$1"
-       local mode iftype iface ifname device
+       local cfgfile="${1:-network}"
        interfaces=
        config_cb() {
                case "$1" in
@@ -33,18 +32,19 @@ scan_interfaces() {
                                config_set "$2" auto 1
                        ;;
                esac
+               local iftype ifname device proto
                config_get iftype "$CONFIG_SECTION" TYPE
                case "$iftype" in
                        interface)
-                               config_get proto "$CONFIG_SECTION" proto
                                append interfaces "$CONFIG_SECTION"
+                               config_get proto "$CONFIG_SECTION" proto
                                config_get iftype "$CONFIG_SECTION" type
                                config_get ifname "$CONFIG_SECTION" ifname
-                               config_get device "$CONFIG_SECTION" device
-                               config_set "$CONFIG_SECTION" device "${device:-$ifname}"
+                               config_get device "$CONFIG_SECTION" device "$ifname"
+                               config_set "$CONFIG_SECTION" device "$device"
                                case "$iftype" in
                                        bridge)
-                                               config_set "$CONFIG_SECTION" ifnames "${device:-$ifname}"
+                                               config_set "$CONFIG_SECTION" ifnames "$device"
                                                config_set "$CONFIG_SECTION" ifname br-"$CONFIG_SECTION"
                                        ;;
                                esac
@@ -52,7 +52,7 @@ scan_interfaces() {
                        ;;
                esac
        }
-       config_load "${cfgfile:-network}"
+       config_load "${cfgfile}"
 }
 
 add_vlan() {
@@ -84,7 +84,6 @@ prepare_interface() {
        local iface="$1"
        local config="$2"
        local vifmac="$3"
-       local proto
 
        # if we're called for the bridge interface itself, don't bother trying
        # to create any interfaces here. The scripts have already done that, otherwise
@@ -92,6 +91,7 @@ prepare_interface() {
        [ "br-$config" = "$iface" -o -e "$iface" ] && return 0;
 
        ifconfig "$iface" 2>/dev/null >/dev/null && {
+               local proto
                config_get proto "$config" proto
 
                # make sure the interface is removed from any existing bridge and deconfigured,
@@ -111,14 +111,13 @@ prepare_interface() {
        ifconfig "$iface" 2>/dev/null >/dev/null || return 0
 
        # Setup bridging
+       local iftype
        config_get iftype "$config" type
-       config_get stp "$config" stp
        case "$iftype" in
                bridge)
                        [ -x /usr/sbin/brctl ] && {
                                ifconfig "br-$config" 2>/dev/null >/dev/null && {
-                                       local newdevs=
-
+                                       local newdevs devices
                                        config_get devices "$config" device
                                        for dev in $(sort_list "$devices" "$iface"); do
                                                append newdevs "$dev"
@@ -127,11 +126,13 @@ prepare_interface() {
                                        $DEBUG brctl addif "br-$config" "$iface"
                                        # Bridge existed already. No further processing necesary
                                } || {
+                                       local stp
+                                       config_get_bool stp "$config" stp 0
                                        $DEBUG brctl addbr "br-$config"
                                        $DEBUG brctl setfd "br-$config" 0
                                        $DEBUG ifconfig "br-$config" up
                                        $DEBUG brctl addif "br-$config" "$iface"
-                                       $DEBUG brctl stp "br-$config" ${stp:-0}
+                                       $DEBUG brctl stp "br-$config" $stp
                                        # Creating the bridge here will have triggered a hotplug event, which will
                                        # result in another setup_interface() call, so we simply stop processing
                                        # the current event at this point.
@@ -148,6 +149,7 @@ set_interface_ifname() {
        local config="$1"
        local ifname="$2"
 
+       local device
        config_get device "$1" device
        uci_set_state network "$config" ifname "$ifname"
        uci_set_state network "$config" device "$device"
@@ -161,11 +163,13 @@ setup_interface_static() {
        local iface="$1"
        local config="$2"
 
+       local ipaddr netmask ip6addr
        config_get ipaddr "$config" ipaddr
        config_get netmask "$config" netmask
        config_get ip6addr "$config" ip6addr
        [ -z "$ipaddr" -o -z "$netmask" ] && [ -z "$ip6addr" ] && return 1
 
+       local gateway ip6gw dns bcast
        config_get gateway "$config" gateway
        config_get ip6gw "$config" ip6gw
        config_get dns "$config" dns
@@ -194,24 +198,30 @@ setup_interface_alias() {
        local parent="$2"
        local iface="$3"
 
+       local cfg
        config_get cfg "$config" interface
        [ "$parent" == "$cfg" ] || return 0
 
        # alias counter
-       config_get ctr "$parent" alias_count
+       local ctr
+       config_get ctr "$parent" alias_count 0
        ctr="$(($ctr + 1))"
        config_set "$parent" alias_count "$ctr"
 
        # alias list
+       local list
        config_get list "$parent" aliases
        append list "$config"
        config_set "$parent" aliases "$list"
 
-       set_interface_ifname "$config" "$iface:$ctr"
-       config_get proto "$config" proto
-       case "${proto:-static}" in
+       iface="$iface:$ctr"
+       set_interface_ifname "$config" "$iface"
+
+       local proto
+       config_get proto "$config" proto "static"
+       case "${proto}" in
                static)
-                       setup_interface_static "$iface:$ctr" "$config"
+                       setup_interface_static "$iface" "$config"
                ;;
                *)
                        echo "Unsupported type '$proto' for alias config '$config'"
@@ -223,16 +233,13 @@ setup_interface_alias() {
 setup_interface() {
        local iface="$1"
        local config="$2"
+       local proto="$3"
        local vifmac="$4"
-       local proto
-       local macaddr
-       local hasipv6
 
        [ -n "$config" ] || {
                config=$(find_config "$iface")
                [ "$?" = 0 ] || return 1
        }
-       proto="${3:-$(config_get "$config" proto)}"
 
        prepare_interface "$iface" "$config" "$vifmac" || return 0
 
@@ -247,21 +254,24 @@ setup_interface() {
        # Check whether this interface has an IPv6 address
        # defined and ensure that the kmod is loaded since
        # ifup could be triggered before modules are loaded.
+       local hasipv6
        config_get hasipv6 "$config" ip6addr
        [ -n "$hasipv6" ] && [ ! -d /proc/sys/net/ipv6 ] && {
                grep -q '^ipv6' /etc/modules.d/* && insmod ipv6
        }
 
        # Interface settings
-       config_get mtu "$config" mtu
-       config_get macaddr "$config" macaddr
        grep "$iface:" /proc/net/dev > /dev/null && {
+               local mtu macaddr
+               config_get mtu "$config" mtu
+               config_get macaddr "$config" macaddr
                [ -n "$macaddr" ] && $DEBUG ifconfig "$iface" down
                $DEBUG ifconfig "$iface" ${macaddr:+hw ether "$macaddr"} ${mtu:+mtu $mtu} up
        }
        set_interface_ifname "$config" "$iface"
 
        pidfile="/var/run/$iface.pid"
+       [ -n "$proto" ] || config_get proto "$config" proto
        case "$proto" in
                static)
                        setup_interface_static "$iface" "$config"
@@ -269,11 +279,11 @@ setup_interface() {
                dhcp)
                        # prevent udhcpc from starting more than once
                        lock "/var/lock/dhcp-$iface"
-                       pid="$(cat "$pidfile" 2>/dev/null)"
+                       local pid="$(cat "$pidfile" 2>/dev/null)"
                        if [ -d "/proc/$pid" ] && grep udhcpc "/proc/${pid}/cmdline" >/dev/null 2>/dev/null; then
                                lock -u "/var/lock/dhcp-$iface"
                        else
-
+                               local ipaddr netmask hostname proto1 clientid
                                config_get ipaddr "$config" ipaddr
                                config_get netmask "$config" netmask
                                config_get hostname "$config" hostname
@@ -284,6 +294,7 @@ setup_interface() {
                                        $DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
 
                                # don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+                               local dhcpopts
                                [ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
                                $DEBUG eval udhcpc -t 0 -i "$iface" ${ipaddr:+-r $ipaddr} ${hostname:+-H $hostname} ${clientid:+-c $clientid} -b -p "$pidfile" ${dhcpopts:- -R &}
                                lock -u "/var/lock/dhcp-$iface"
@@ -306,6 +317,8 @@ setup_interface() {
                        ifconfig "$ifn" down
                done
        }
+
+       local aliases
        config_set "$config" aliases ""
        config_set "$config" alias_count 0
        config_foreach setup_interface_alias alias "$config" "$iface"