CONFIG_CLKSRC_OF=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_IPROC=y
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
--- /dev/null
+From 63243a4da7d0dfa19dcacd0a529782eeb2f86f92 Mon Sep 17 00:00:00 2001
+From: Simran Rai <ssimran@broadcom.com>
+Date: Mon, 19 Oct 2015 15:27:19 -0700
+Subject: [PATCH] clk: iproc: Fix PLL output frequency calculation
+
+This patch affects the clocks that use fractional ndivider in their
+PLL output frequency calculation. Instead of 2^20 divide factor, the
+clock's ndiv integer shift was used. Fixed the bug by replacing ndiv
+integer shift with 2^20 factor.
+
+Signed-off-by: Simran Rai <ssimran@broadcom.com>
+Signed-off-by: Ray Jui <rjui@broadcom.com>
+Reviewed-by: Scott Branden <sbranden@broadcom.com>
+Fixes: 5fe225c105fd ("clk: iproc: add initial common clock support")
+Cc: <stable@vger.kernel.org> # v4.1+
+Signed-off-by: Michael Turquette <mturquette@baylibre.com>
+---
+ drivers/clk/bcm/clk-iproc-pll.c | 13 +++++--------
+ 1 file changed, 5 insertions(+), 8 deletions(-)
+
+--- a/drivers/clk/bcm/clk-iproc-pll.c
++++ b/drivers/clk/bcm/clk-iproc-pll.c
+@@ -345,8 +345,8 @@ static unsigned long iproc_pll_recalc_ra
+ struct iproc_pll *pll = clk->pll;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ u32 val;
+- u64 ndiv;
+- unsigned int ndiv_int, ndiv_frac, pdiv;
++ u64 ndiv, ndiv_int, ndiv_frac;
++ unsigned int pdiv;
+
+ if (parent_rate == 0)
+ return 0;
+@@ -366,22 +366,19 @@ static unsigned long iproc_pll_recalc_ra
+ val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+ ndiv_int = (val >> ctrl->ndiv_int.shift) &
+ bit_mask(ctrl->ndiv_int.width);
+- ndiv = (u64)ndiv_int << ctrl->ndiv_int.shift;
++ ndiv = ndiv_int << 20;
+
+ if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+ val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
+ ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
+ bit_mask(ctrl->ndiv_frac.width);
+-
+- if (ndiv_frac != 0)
+- ndiv = ((u64)ndiv_int << ctrl->ndiv_int.shift) |
+- ndiv_frac;
++ ndiv += ndiv_frac;
+ }
+
+ val = readl(pll->pll_base + ctrl->pdiv.offset);
+ pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+- clk->rate = (ndiv * parent_rate) >> ctrl->ndiv_int.shift;
++ clk->rate = (ndiv * parent_rate) >> 20;
+
+ if (pdiv == 0)
+ clk->rate *= 2;
--- /dev/null
+From b5116083e227fa478e20d5ed945430088aa1a00b Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 15:48:25 -0400
+Subject: [PATCH 44/50] clk: cygnus: Convert all macros to all caps
+
+The macros that are being used to initialize the values of the clk
+structures should be all caps. Find and replace all of them with their
+relevant counterparts.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ drivers/clk/bcm/clk-cygnus.c | 146 +++++++++++++++++++++----------------------
+ 1 file changed, 73 insertions(+), 73 deletions(-)
+
+--- a/drivers/clk/bcm/clk-cygnus.c
++++ b/drivers/clk/bcm/clk-cygnus.c
+@@ -23,28 +23,28 @@
+ #include <dt-bindings/clock/bcm-cygnus.h>
+ #include "clk-iproc.h"
+
+-#define reg_val(o, s, w) { .offset = o, .shift = s, .width = w, }
++#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
+
+-#define aon_val(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
++#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+-#define sw_ctrl_val(o, s) { .offset = o, .shift = s, }
++#define SW_CTRL_VAL(o, s) { .offset = o, .shift = s, }
+
+-#define asiu_div_val(o, es, hs, hw, ls, lw) \
++#define ASIU_DIV_VAL(o, es, hs, hw, ls, lw) \
+ { .offset = o, .en_shift = es, .high_shift = hs, \
+ .high_width = hw, .low_shift = ls, .low_width = lw }
+
+-#define reset_val(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
++#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+ .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
+ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+-#define vco_ctrl_val(uo, lo) { .u_offset = uo, .l_offset = lo }
++#define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+
+-#define enable_val(o, es, hs, bs) { .offset = o, .enable_shift = es, \
++#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+ .hold_shift = hs, .bypass_shift = bs }
+
+-#define asiu_gate_val(o, es) { .offset = o, .en_shift = es }
++#define ASIU_GATE_VAL(o, es) { .offset = o, .en_shift = es }
+
+ static void __init cygnus_armpll_init(struct device_node *node)
+ {
+@@ -55,52 +55,52 @@ CLK_OF_DECLARE(cygnus_armpll, "brcm,cygn
+ static const struct iproc_pll_ctrl genpll = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+- .aon = aon_val(0x0, 2, 1, 0),
+- .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
+- .sw_ctrl = sw_ctrl_val(0x10, 31),
+- .ndiv_int = reg_val(0x10, 20, 10),
+- .ndiv_frac = reg_val(0x10, 0, 20),
+- .pdiv = reg_val(0x14, 0, 4),
+- .vco_ctrl = vco_ctrl_val(0x18, 0x1c),
+- .status = reg_val(0x28, 12, 1),
++ .aon = AON_VAL(0x0, 2, 1, 0),
++ .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
++ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
++ .ndiv_int = REG_VAL(0x10, 20, 10),
++ .ndiv_frac = REG_VAL(0x10, 0, 20),
++ .pdiv = REG_VAL(0x14, 0, 4),
++ .vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
++ .status = REG_VAL(0x28, 12, 1),
+ };
+
+ static const struct iproc_clk_ctrl genpll_clk[] = {
+ [BCM_CYGNUS_GENPLL_AXI21_CLK] = {
+ .channel = BCM_CYGNUS_GENPLL_AXI21_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x4, 6, 0, 12),
+- .mdiv = reg_val(0x20, 0, 8),
++ .enable = ENABLE_VAL(0x4, 6, 0, 12),
++ .mdiv = REG_VAL(0x20, 0, 8),
+ },
+ [BCM_CYGNUS_GENPLL_250MHZ_CLK] = {
+ .channel = BCM_CYGNUS_GENPLL_250MHZ_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x4, 7, 1, 13),
+- .mdiv = reg_val(0x20, 10, 8),
++ .enable = ENABLE_VAL(0x4, 7, 1, 13),
++ .mdiv = REG_VAL(0x20, 10, 8),
+ },
+ [BCM_CYGNUS_GENPLL_IHOST_SYS_CLK] = {
+ .channel = BCM_CYGNUS_GENPLL_IHOST_SYS_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x4, 8, 2, 14),
+- .mdiv = reg_val(0x20, 20, 8),
++ .enable = ENABLE_VAL(0x4, 8, 2, 14),
++ .mdiv = REG_VAL(0x20, 20, 8),
+ },
+ [BCM_CYGNUS_GENPLL_ENET_SW_CLK] = {
+ .channel = BCM_CYGNUS_GENPLL_ENET_SW_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x4, 9, 3, 15),
+- .mdiv = reg_val(0x24, 0, 8),
++ .enable = ENABLE_VAL(0x4, 9, 3, 15),
++ .mdiv = REG_VAL(0x24, 0, 8),
+ },
+ [BCM_CYGNUS_GENPLL_AUDIO_125_CLK] = {
+ .channel = BCM_CYGNUS_GENPLL_AUDIO_125_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x4, 10, 4, 16),
+- .mdiv = reg_val(0x24, 10, 8),
++ .enable = ENABLE_VAL(0x4, 10, 4, 16),
++ .mdiv = REG_VAL(0x24, 10, 8),
+ },
+ [BCM_CYGNUS_GENPLL_CAN_CLK] = {
+ .channel = BCM_CYGNUS_GENPLL_CAN_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x4, 11, 5, 17),
+- .mdiv = reg_val(0x24, 20, 8),
++ .enable = ENABLE_VAL(0x4, 11, 5, 17),
++ .mdiv = REG_VAL(0x24, 20, 8),
+ },
+ };
+
+@@ -113,51 +113,51 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygn
+
+ static const struct iproc_pll_ctrl lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+- .aon = aon_val(0x0, 2, 5, 4),
+- .reset = reset_val(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
+- .sw_ctrl = sw_ctrl_val(0x4, 31),
+- .ndiv_int = reg_val(0x4, 16, 10),
+- .pdiv = reg_val(0x4, 26, 4),
+- .vco_ctrl = vco_ctrl_val(0x10, 0x14),
+- .status = reg_val(0x18, 12, 1),
++ .aon = AON_VAL(0x0, 2, 5, 4),
++ .reset = RESET_VAL(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
++ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
++ .ndiv_int = REG_VAL(0x4, 16, 10),
++ .pdiv = REG_VAL(0x4, 26, 4),
++ .vco_ctrl = VCO_CTRL_VAL(0x10, 0x14),
++ .status = REG_VAL(0x18, 12, 1),
+ };
+
+ static const struct iproc_clk_ctrl lcpll0_clk[] = {
+ [BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK] = {
+ .channel = BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x0, 7, 1, 13),
+- .mdiv = reg_val(0x8, 0, 8),
++ .enable = ENABLE_VAL(0x0, 7, 1, 13),
++ .mdiv = REG_VAL(0x8, 0, 8),
+ },
+ [BCM_CYGNUS_LCPLL0_DDR_PHY_CLK] = {
+ .channel = BCM_CYGNUS_LCPLL0_DDR_PHY_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x0, 8, 2, 14),
+- .mdiv = reg_val(0x8, 10, 8),
++ .enable = ENABLE_VAL(0x0, 8, 2, 14),
++ .mdiv = REG_VAL(0x8, 10, 8),
+ },
+ [BCM_CYGNUS_LCPLL0_SDIO_CLK] = {
+ .channel = BCM_CYGNUS_LCPLL0_SDIO_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x0, 9, 3, 15),
+- .mdiv = reg_val(0x8, 20, 8),
++ .enable = ENABLE_VAL(0x0, 9, 3, 15),
++ .mdiv = REG_VAL(0x8, 20, 8),
+ },
+ [BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK] = {
+ .channel = BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x0, 10, 4, 16),
+- .mdiv = reg_val(0xc, 0, 8),
++ .enable = ENABLE_VAL(0x0, 10, 4, 16),
++ .mdiv = REG_VAL(0xc, 0, 8),
+ },
+ [BCM_CYGNUS_LCPLL0_SMART_CARD_CLK] = {
+ .channel = BCM_CYGNUS_LCPLL0_SMART_CARD_CLK,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x0, 11, 5, 17),
+- .mdiv = reg_val(0xc, 10, 8),
++ .enable = ENABLE_VAL(0x0, 11, 5, 17),
++ .mdiv = REG_VAL(0xc, 10, 8),
+ },
+ [BCM_CYGNUS_LCPLL0_CH5_UNUSED] = {
+ .channel = BCM_CYGNUS_LCPLL0_CH5_UNUSED,
+ .flags = IPROC_CLK_AON,
+- .enable = enable_val(0x0, 12, 6, 18),
+- .mdiv = reg_val(0xc, 20, 8),
++ .enable = ENABLE_VAL(0x0, 12, 6, 18),
++ .mdiv = REG_VAL(0xc, 20, 8),
+ },
+ };
+
+@@ -189,52 +189,52 @@ static const struct iproc_pll_vco_param
+ static const struct iproc_pll_ctrl mipipll = {
+ .flags = IPROC_CLK_PLL_ASIU | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_NEEDS_READ_BACK,
+- .aon = aon_val(0x0, 4, 17, 16),
+- .asiu = asiu_gate_val(0x0, 3),
+- .reset = reset_val(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
+- .ndiv_int = reg_val(0x10, 20, 10),
+- .ndiv_frac = reg_val(0x10, 0, 20),
+- .pdiv = reg_val(0x14, 0, 4),
+- .vco_ctrl = vco_ctrl_val(0x18, 0x1c),
+- .status = reg_val(0x28, 12, 1),
++ .aon = AON_VAL(0x0, 4, 17, 16),
++ .asiu = ASIU_GATE_VAL(0x0, 3),
++ .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
++ .ndiv_int = REG_VAL(0x10, 20, 10),
++ .ndiv_frac = REG_VAL(0x10, 0, 20),
++ .pdiv = REG_VAL(0x14, 0, 4),
++ .vco_ctrl = VCO_CTRL_VAL(0x18, 0x1c),
++ .status = REG_VAL(0x28, 12, 1),
+ };
+
+ static const struct iproc_clk_ctrl mipipll_clk[] = {
+ [BCM_CYGNUS_MIPIPLL_CH0_UNUSED] = {
+ .channel = BCM_CYGNUS_MIPIPLL_CH0_UNUSED,
+ .flags = IPROC_CLK_NEEDS_READ_BACK,
+- .enable = enable_val(0x4, 12, 6, 18),
+- .mdiv = reg_val(0x20, 0, 8),
++ .enable = ENABLE_VAL(0x4, 12, 6, 18),
++ .mdiv = REG_VAL(0x20, 0, 8),
+ },
+ [BCM_CYGNUS_MIPIPLL_CH1_LCD] = {
+ .channel = BCM_CYGNUS_MIPIPLL_CH1_LCD,
+ .flags = IPROC_CLK_NEEDS_READ_BACK,
+- .enable = enable_val(0x4, 13, 7, 19),
+- .mdiv = reg_val(0x20, 10, 8),
++ .enable = ENABLE_VAL(0x4, 13, 7, 19),
++ .mdiv = REG_VAL(0x20, 10, 8),
+ },
+ [BCM_CYGNUS_MIPIPLL_CH2_V3D] = {
+ .channel = BCM_CYGNUS_MIPIPLL_CH2_V3D,
+ .flags = IPROC_CLK_NEEDS_READ_BACK,
+- .enable = enable_val(0x4, 14, 8, 20),
+- .mdiv = reg_val(0x20, 20, 8),
++ .enable = ENABLE_VAL(0x4, 14, 8, 20),
++ .mdiv = REG_VAL(0x20, 20, 8),
+ },
+ [BCM_CYGNUS_MIPIPLL_CH3_UNUSED] = {
+ .channel = BCM_CYGNUS_MIPIPLL_CH3_UNUSED,
+ .flags = IPROC_CLK_NEEDS_READ_BACK,
+- .enable = enable_val(0x4, 15, 9, 21),
+- .mdiv = reg_val(0x24, 0, 8),
++ .enable = ENABLE_VAL(0x4, 15, 9, 21),
++ .mdiv = REG_VAL(0x24, 0, 8),
+ },
+ [BCM_CYGNUS_MIPIPLL_CH4_UNUSED] = {
+ .channel = BCM_CYGNUS_MIPIPLL_CH4_UNUSED,
+ .flags = IPROC_CLK_NEEDS_READ_BACK,
+- .enable = enable_val(0x4, 16, 10, 22),
+- .mdiv = reg_val(0x24, 10, 8),
++ .enable = ENABLE_VAL(0x4, 16, 10, 22),
++ .mdiv = REG_VAL(0x24, 10, 8),
+ },
+ [BCM_CYGNUS_MIPIPLL_CH5_UNUSED] = {
+ .channel = BCM_CYGNUS_MIPIPLL_CH5_UNUSED,
+ .flags = IPROC_CLK_NEEDS_READ_BACK,
+- .enable = enable_val(0x4, 17, 11, 23),
+- .mdiv = reg_val(0x24, 20, 8),
++ .enable = ENABLE_VAL(0x4, 17, 11, 23),
++ .mdiv = REG_VAL(0x24, 20, 8),
+ },
+ };
+
+@@ -247,15 +247,15 @@ static void __init cygnus_mipipll_clk_in
+ CLK_OF_DECLARE(cygnus_mipipll, "brcm,cygnus-mipipll", cygnus_mipipll_clk_init);
+
+ static const struct iproc_asiu_div asiu_div[] = {
+- [BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_div_val(0x0, 31, 16, 10, 0, 10),
+- [BCM_CYGNUS_ASIU_ADC_CLK] = asiu_div_val(0x4, 31, 16, 10, 0, 10),
+- [BCM_CYGNUS_ASIU_PWM_CLK] = asiu_div_val(0x8, 31, 16, 10, 0, 10),
++ [BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_DIV_VAL(0x0, 31, 16, 10, 0, 10),
++ [BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_DIV_VAL(0x4, 31, 16, 10, 0, 10),
++ [BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_DIV_VAL(0x8, 31, 16, 10, 0, 10),
+ };
+
+ static const struct iproc_asiu_gate asiu_gate[] = {
+- [BCM_CYGNUS_ASIU_KEYPAD_CLK] = asiu_gate_val(0x0, 7),
+- [BCM_CYGNUS_ASIU_ADC_CLK] = asiu_gate_val(0x0, 9),
+- [BCM_CYGNUS_ASIU_PWM_CLK] = asiu_gate_val(IPROC_CLK_INVALID_OFFSET, 0),
++ [BCM_CYGNUS_ASIU_KEYPAD_CLK] = ASIU_GATE_VAL(0x0, 7),
++ [BCM_CYGNUS_ASIU_ADC_CLK] = ASIU_GATE_VAL(0x0, 9),
++ [BCM_CYGNUS_ASIU_PWM_CLK] = ASIU_GATE_VAL(IPROC_CLK_INVALID_OFFSET, 0),
+ };
+
+ static void __init cygnus_asiu_init(struct device_node *node)
--- /dev/null
+From 7c70cb333deb6e2f88da9c94ddd6b3b00c97b93a Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 15:48:26 -0400
+Subject: [PATCH 45/50] clk: iproc: Add PWRCTRL support
+
+Some iProc SoC clocks use a different way to control clock power, via
+the PWRDWN bit in the PLL control register. Since the PLL control
+register is used to access the PWRDWN bit, there is no need for the
+pwr_base when this is being used. A new flag, IPROC_CLK_EMBED_PWRCTRL,
+has been added to identify this usage. We can use the AON interface to
+write the values to enable/disable PWRDOWN.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ drivers/clk/bcm/clk-iproc-pll.c | 55 ++++++++++++++++++++++++++++-------------
+ drivers/clk/bcm/clk-iproc.h | 6 +++++
+ 2 files changed, 44 insertions(+), 17 deletions(-)
+
+--- a/drivers/clk/bcm/clk-iproc-pll.c
++++ b/drivers/clk/bcm/clk-iproc-pll.c
+@@ -148,14 +148,25 @@ static void __pll_disable(struct iproc_p
+ writel(val, pll->asiu_base + ctrl->asiu.offset);
+ }
+
+- /* latch input value so core power can be shut down */
+- val = readl(pll->pwr_base + ctrl->aon.offset);
+- val |= (1 << ctrl->aon.iso_shift);
+- writel(val, pll->pwr_base + ctrl->aon.offset);
+-
+- /* power down the core */
+- val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+- writel(val, pll->pwr_base + ctrl->aon.offset);
++ if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
++ val = readl(pll->pll_base + ctrl->aon.offset);
++ val |= (bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
++ writel(val, pll->pll_base + ctrl->aon.offset);
++
++ if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
++ readl(pll->pll_base + ctrl->aon.offset);
++ }
++
++ if (pll->pwr_base) {
++ /* latch input value so core power can be shut down */
++ val = readl(pll->pwr_base + ctrl->aon.offset);
++ val |= (1 << ctrl->aon.iso_shift);
++ writel(val, pll->pwr_base + ctrl->aon.offset);
++
++ /* power down the core */
++ val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
++ writel(val, pll->pwr_base + ctrl->aon.offset);
++ }
+ }
+
+ static int __pll_enable(struct iproc_pll *pll)
+@@ -163,11 +174,22 @@ static int __pll_enable(struct iproc_pll
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ u32 val;
+
+- /* power up the PLL and make sure it's not latched */
+- val = readl(pll->pwr_base + ctrl->aon.offset);
+- val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+- val &= ~(1 << ctrl->aon.iso_shift);
+- writel(val, pll->pwr_base + ctrl->aon.offset);
++ if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
++ val = readl(pll->pll_base + ctrl->aon.offset);
++ val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
++ writel(val, pll->pll_base + ctrl->aon.offset);
++
++ if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
++ readl(pll->pll_base + ctrl->aon.offset);
++ }
++
++ if (pll->pwr_base) {
++ /* power up the PLL and make sure it's not latched */
++ val = readl(pll->pwr_base + ctrl->aon.offset);
++ val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
++ val &= ~(1 << ctrl->aon.iso_shift);
++ writel(val, pll->pwr_base + ctrl->aon.offset);
++ }
+
+ /* certain PLLs also need to be ungated from the ASIU top level */
+ if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+@@ -607,9 +629,8 @@ void __init iproc_pll_clk_setup(struct d
+ if (WARN_ON(!pll->pll_base))
+ goto err_pll_iomap;
+
++ /* Some SoCs do not require the pwr_base, thus failing is not fatal */
+ pll->pwr_base = of_iomap(node, 1);
+- if (WARN_ON(!pll->pwr_base))
+- goto err_pwr_iomap;
+
+ /* some PLLs require gating control at the top ASIU level */
+ if (pll_ctrl->flags & IPROC_CLK_PLL_ASIU) {
+@@ -692,9 +713,9 @@ err_pll_register:
+ iounmap(pll->asiu_base);
+
+ err_asiu_iomap:
+- iounmap(pll->pwr_base);
++ if (pll->pwr_base)
++ iounmap(pll->pwr_base);
+
+-err_pwr_iomap:
+ iounmap(pll->pll_base);
+
+ err_pll_iomap:
+--- a/drivers/clk/bcm/clk-iproc.h
++++ b/drivers/clk/bcm/clk-iproc.h
+@@ -49,6 +49,12 @@
+ #define IPROC_CLK_PLL_NEEDS_SW_CFG BIT(4)
+
+ /*
++ * Some PLLs use a different way to control clock power, via the PWRDWN bit in
++ * the PLL control register
++ */
++#define IPROC_CLK_EMBED_PWRCTRL BIT(5)
++
++/*
+ * Parameters for VCO frequency configuration
+ *
+ * VCO frequency =
--- /dev/null
+From d358480591b34d081806ecb5a9474930a4d59f8a Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 15:48:27 -0400
+Subject: [PATCH 46/50] clk: nsp: add clock support for Broadcom Northstar Plus
+ SoC
+
+The Broadcom Northstar Plus SoC is architected under the iProc
+architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, all
+derived from an onboard crystal.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ drivers/clk/bcm/Makefile | 2 +
+ drivers/clk/bcm/clk-nsp.c | 135 ++++++++++++++++++++++++++++++++++++
+ include/dt-bindings/clock/bcm-nsp.h | 51 ++++++++++++++
+ 3 files changed, 188 insertions(+)
+ create mode 100644 drivers/clk/bcm/clk-nsp.c
+ create mode 100644 include/dt-bindings/clock/bcm-nsp.h
+
+--- a/drivers/clk/bcm/Makefile
++++ b/drivers/clk/bcm/Makefile
+@@ -4,3 +4,5 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm281
+ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o
+ obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o
+ obj-$(CONFIG_ARCH_BCM_CYGNUS) += clk-cygnus.o
++obj-$(CONFIG_ARCH_BCM_NSP) += clk-nsp.o
++obj-$(CONFIG_ARCH_BCM_5301X) += clk-nsp.o
+--- /dev/null
++++ b/drivers/clk/bcm/clk-nsp.c
+@@ -0,0 +1,135 @@
++/*
++ * Copyright (C) 2015 Broadcom Corporation
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation version 2.
++ *
++ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
++ * kind, whether express or implied; without even the implied warranty
++ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ */
++
++#include <linux/kernel.h>
++#include <linux/err.h>
++#include <linux/clk-provider.h>
++#include <linux/io.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++
++#include <dt-bindings/clock/bcm-nsp.h>
++#include "clk-iproc.h"
++
++#define REG_VAL(o, s, w) { .offset = o, .shift = s, .width = w, }
++
++#define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
++ .pwr_shift = ps, .iso_shift = is }
++
++#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
++ .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
++ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
++ .ka_width = kaw }
++
++#define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
++ .hold_shift = hs, .bypass_shift = bs }
++
++static void __init nsp_armpll_init(struct device_node *node)
++{
++ iproc_armpll_setup(node);
++}
++CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-armpll", nsp_armpll_init);
++
++static const struct iproc_pll_ctrl genpll = {
++ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
++ .aon = AON_VAL(0x0, 1, 12, 0),
++ .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
++ .ndiv_int = REG_VAL(0x14, 20, 10),
++ .ndiv_frac = REG_VAL(0x14, 0, 20),
++ .pdiv = REG_VAL(0x18, 24, 3),
++ .status = REG_VAL(0x20, 12, 1),
++};
++
++static const struct iproc_clk_ctrl genpll_clk[] = {
++ [BCM_NSP_GENPLL_PHY_CLK] = {
++ .channel = BCM_NSP_GENPLL_PHY_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x4, 12, 6, 18),
++ .mdiv = REG_VAL(0x18, 16, 8),
++ },
++ [BCM_NSP_GENPLL_ENET_SW_CLK] = {
++ .channel = BCM_NSP_GENPLL_ENET_SW_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x4, 13, 7, 19),
++ .mdiv = REG_VAL(0x18, 8, 8),
++ },
++ [BCM_NSP_GENPLL_USB_PHY_REF_CLK] = {
++ .channel = BCM_NSP_GENPLL_USB_PHY_REF_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x4, 14, 8, 20),
++ .mdiv = REG_VAL(0x18, 0, 8),
++ },
++ [BCM_NSP_GENPLL_IPROCFAST_CLK] = {
++ .channel = BCM_NSP_GENPLL_IPROCFAST_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x4, 15, 9, 21),
++ .mdiv = REG_VAL(0x1c, 16, 8),
++ },
++ [BCM_NSP_GENPLL_SATA1_CLK] = {
++ .channel = BCM_NSP_GENPLL_SATA1_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x4, 16, 10, 22),
++ .mdiv = REG_VAL(0x1c, 8, 8),
++ },
++ [BCM_NSP_GENPLL_SATA2_CLK] = {
++ .channel = BCM_NSP_GENPLL_SATA2_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x4, 17, 11, 23),
++ .mdiv = REG_VAL(0x1c, 0, 8),
++ },
++};
++
++static void __init nsp_genpll_clk_init(struct device_node *node)
++{
++ iproc_pll_clk_setup(node, &genpll, NULL, 0, genpll_clk,
++ ARRAY_SIZE(genpll_clk));
++}
++CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp-genpll", nsp_genpll_clk_init);
++
++static const struct iproc_pll_ctrl lcpll0 = {
++ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
++ .aon = AON_VAL(0x0, 1, 24, 0),
++ .reset = RESET_VAL(0x0, 23, 22, 16, 3, 12, 4, 19, 4),
++ .ndiv_int = REG_VAL(0x4, 20, 8),
++ .ndiv_frac = REG_VAL(0x4, 0, 20),
++ .pdiv = REG_VAL(0x4, 28, 3),
++ .status = REG_VAL(0x10, 12, 1),
++};
++
++static const struct iproc_clk_ctrl lcpll0_clk[] = {
++ [BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK] = {
++ .channel = BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x0, 6, 3, 9),
++ .mdiv = REG_VAL(0x8, 24, 8),
++ },
++ [BCM_NSP_LCPLL0_SDIO_CLK] = {
++ .channel = BCM_NSP_LCPLL0_SDIO_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x0, 7, 4, 10),
++ .mdiv = REG_VAL(0x8, 16, 8),
++ },
++ [BCM_NSP_LCPLL0_DDR_PHY_CLK] = {
++ .channel = BCM_NSP_LCPLL0_DDR_PHY_CLK,
++ .flags = IPROC_CLK_AON,
++ .enable = ENABLE_VAL(0x0, 8, 5, 11),
++ .mdiv = REG_VAL(0x8, 8, 8),
++ },
++};
++
++static void __init nsp_lcpll0_clk_init(struct device_node *node)
++{
++ iproc_pll_clk_setup(node, &lcpll0, NULL, 0, lcpll0_clk,
++ ARRAY_SIZE(lcpll0_clk));
++}
++CLK_OF_DECLARE(nsp_lcpll0_clk, "brcm,nsp-lcpll0", nsp_lcpll0_clk_init);
+--- /dev/null
++++ b/include/dt-bindings/clock/bcm-nsp.h
+@@ -0,0 +1,51 @@
++/*
++ * BSD LICENSE
++ *
++ * Copyright(c) 2015 Broadcom Corporation. All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ *
++ * * Redistributions of source code must retain the above copyright
++ * notice, this list of conditions and the following disclaimer.
++ * * Redistributions in binary form must reproduce the above copyright
++ * notice, this list of conditions and the following disclaimer in
++ * the documentation and/or other materials provided with the
++ * distribution.
++ * * Neither the name of Broadcom Corporation nor the names of its
++ * contributors may be used to endorse or promote products derived
++ * from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++#ifndef _CLOCK_BCM_NSP_H
++#define _CLOCK_BCM_NSP_H
++
++/* GENPLL clock channel ID */
++#define BCM_NSP_GENPLL 0
++#define BCM_NSP_GENPLL_PHY_CLK 1
++#define BCM_NSP_GENPLL_ENET_SW_CLK 2
++#define BCM_NSP_GENPLL_USB_PHY_REF_CLK 3
++#define BCM_NSP_GENPLL_IPROCFAST_CLK 4
++#define BCM_NSP_GENPLL_SATA1_CLK 5
++#define BCM_NSP_GENPLL_SATA2_CLK 6
++
++/* LCPLL0 clock channel ID */
++#define BCM_NSP_LCPLL0 0
++#define BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK 1
++#define BCM_NSP_LCPLL0_SDIO_CLK 2
++#define BCM_NSP_LCPLL0_DDR_PHY_CLK 3
++
++#endif /* _CLOCK_BCM_NSP_H */
--- /dev/null
+From acbb7a3de7e4d83b23c0bbb3eaf77d15a041d865 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 15:48:28 -0400
+Subject: [PATCH 47/50] clk: iproc: Add PLL base write function
+
+All writes to the PLL base address must be flushed if the
+IPROC_CLK_NEEDS_READ_BACK flag is set. If we add a function to make the
+necessary write and reads, we can make sure that any future code which
+makes PLL base writes will do the correct thing.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ drivers/clk/bcm/clk-iproc-pll.c | 80 +++++++++++++++++------------------------
+ 1 file changed, 33 insertions(+), 47 deletions(-)
+
+--- a/drivers/clk/bcm/clk-iproc-pll.c
++++ b/drivers/clk/bcm/clk-iproc-pll.c
+@@ -137,6 +137,18 @@ static int pll_wait_for_lock(struct ipro
+ return -EIO;
+ }
+
++static void iproc_pll_write(const struct iproc_pll *pll, void __iomem *base,
++ const u32 offset, u32 val)
++{
++ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
++
++ writel(val, base + offset);
++
++ if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
++ base == pll->pll_base))
++ val = readl(base + offset);
++}
++
+ static void __pll_disable(struct iproc_pll *pll)
+ {
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+@@ -145,27 +157,24 @@ static void __pll_disable(struct iproc_p
+ if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+ val = readl(pll->asiu_base + ctrl->asiu.offset);
+ val &= ~(1 << ctrl->asiu.en_shift);
+- writel(val, pll->asiu_base + ctrl->asiu.offset);
++ iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+ }
+
+ if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+ val = readl(pll->pll_base + ctrl->aon.offset);
+ val |= (bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+- writel(val, pll->pll_base + ctrl->aon.offset);
+-
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->aon.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
+ }
+
+ if (pll->pwr_base) {
+ /* latch input value so core power can be shut down */
+ val = readl(pll->pwr_base + ctrl->aon.offset);
+ val |= (1 << ctrl->aon.iso_shift);
+- writel(val, pll->pwr_base + ctrl->aon.offset);
++ iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+
+ /* power down the core */
+ val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+- writel(val, pll->pwr_base + ctrl->aon.offset);
++ iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+ }
+ }
+
+@@ -177,10 +186,7 @@ static int __pll_enable(struct iproc_pll
+ if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+ val = readl(pll->pll_base + ctrl->aon.offset);
+ val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+- writel(val, pll->pll_base + ctrl->aon.offset);
+-
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->aon.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
+ }
+
+ if (pll->pwr_base) {
+@@ -188,14 +194,14 @@ static int __pll_enable(struct iproc_pll
+ val = readl(pll->pwr_base + ctrl->aon.offset);
+ val |= bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift;
+ val &= ~(1 << ctrl->aon.iso_shift);
+- writel(val, pll->pwr_base + ctrl->aon.offset);
++ iproc_pll_write(pll, pll->pwr_base, ctrl->aon.offset, val);
+ }
+
+ /* certain PLLs also need to be ungated from the ASIU top level */
+ if (ctrl->flags & IPROC_CLK_PLL_ASIU) {
+ val = readl(pll->asiu_base + ctrl->asiu.offset);
+ val |= (1 << ctrl->asiu.en_shift);
+- writel(val, pll->asiu_base + ctrl->asiu.offset);
++ iproc_pll_write(pll, pll->asiu_base, ctrl->asiu.offset, val);
+ }
+
+ return 0;
+@@ -209,9 +215,7 @@ static void __pll_put_in_reset(struct ip
+
+ val = readl(pll->pll_base + reset->offset);
+ val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
+- writel(val, pll->pll_base + reset->offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + reset->offset);
++ iproc_pll_write(pll, pll->pll_base, reset->offset, val);
+ }
+
+ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
+@@ -228,9 +232,7 @@ static void __pll_bring_out_reset(struct
+ val |= ki << reset->ki_shift | kp << reset->kp_shift |
+ ka << reset->ka_shift;
+ val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
+- writel(val, pll->pll_base + reset->offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + reset->offset);
++ iproc_pll_write(pll, pll->pll_base, reset->offset, val);
+ }
+
+ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
+@@ -285,9 +287,8 @@ static int pll_set_rate(struct iproc_clk
+ /* put PLL in reset */
+ __pll_put_in_reset(pll);
+
+- writel(0, pll->pll_base + ctrl->vco_ctrl.u_offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->vco_ctrl.u_offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.u_offset, 0);
++
+ val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
+
+ if (rate >= VCO_LOW && rate < VCO_MID)
+@@ -298,17 +299,13 @@ static int pll_set_rate(struct iproc_clk
+ else
+ val |= (1 << PLL_VCO_HIGH_SHIFT);
+
+- writel(val, pll->pll_base + ctrl->vco_ctrl.l_offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.l_offset, val);
+
+ /* program integer part of NDIV */
+ val = readl(pll->pll_base + ctrl->ndiv_int.offset);
+ val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
+ val |= vco->ndiv_int << ctrl->ndiv_int.shift;
+- writel(val, pll->pll_base + ctrl->ndiv_int.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->ndiv_int.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_int.offset, val);
+
+ /* program fractional part of NDIV */
+ if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+@@ -316,18 +313,15 @@ static int pll_set_rate(struct iproc_clk
+ val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+ ctrl->ndiv_frac.shift);
+ val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+- writel(val, pll->pll_base + ctrl->ndiv_frac.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->ndiv_frac.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_frac.offset,
++ val);
+ }
+
+ /* program PDIV */
+ val = readl(pll->pll_base + ctrl->pdiv.offset);
+ val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
+ val |= vco->pdiv << ctrl->pdiv.shift;
+- writel(val, pll->pll_base + ctrl->pdiv.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->pdiv.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->pdiv.offset, val);
+
+ __pll_bring_out_reset(pll, kp, ka, ki);
+
+@@ -464,14 +458,12 @@ static int iproc_clk_enable(struct clk_h
+ /* channel enable is active low */
+ val = readl(pll->pll_base + ctrl->enable.offset);
+ val &= ~(1 << ctrl->enable.enable_shift);
+- writel(val, pll->pll_base + ctrl->enable.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
+
+ /* also make sure channel is not held */
+ val = readl(pll->pll_base + ctrl->enable.offset);
+ val &= ~(1 << ctrl->enable.hold_shift);
+- writel(val, pll->pll_base + ctrl->enable.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->enable.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
+
+ return 0;
+ }
+@@ -488,9 +480,7 @@ static void iproc_clk_disable(struct clk
+
+ val = readl(pll->pll_base + ctrl->enable.offset);
+ val |= 1 << ctrl->enable.enable_shift;
+- writel(val, pll->pll_base + ctrl->enable.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->enable.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
+ }
+
+ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
+@@ -559,9 +549,7 @@ static int iproc_clk_set_rate(struct clk
+ val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+ val |= div << ctrl->mdiv.shift;
+ }
+- writel(val, pll->pll_base + ctrl->mdiv.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->mdiv.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->mdiv.offset, val);
+ clk->rate = parent_rate / div;
+
+ return 0;
+@@ -588,9 +576,7 @@ static void iproc_pll_sw_cfg(struct ipro
+
+ val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
+ val |= BIT(ctrl->sw_ctrl.shift);
+- writel(val, pll->pll_base + ctrl->sw_ctrl.offset);
+- if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK))
+- readl(pll->pll_base + ctrl->sw_ctrl.offset);
++ iproc_pll_write(pll, pll->pll_base, ctrl->sw_ctrl.offset, val);
+ }
+ }
+
--- /dev/null
+From fb9e4932d17ad32786d03cb672fb62f2b337acf5 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 15:48:29 -0400
+Subject: [PATCH 48/50] clk: iproc: Split off dig_filter
+
+The PLL loop filter/gain can be located in a separate register on some
+SoCs. Split these off into a separate variable, so that an offset can
+be added if necessary. Also, make the necessary modifications to the
+Cygnus and NSP drivers for this change.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ drivers/clk/bcm/clk-cygnus.c | 17 +++++++++++------
+ drivers/clk/bcm/clk-iproc-pll.c | 14 +++++++++-----
+ drivers/clk/bcm/clk-iproc.h | 10 +++++++++-
+ drivers/clk/bcm/clk-nsp.c | 14 +++++++++-----
+ 4 files changed, 38 insertions(+), 17 deletions(-)
+
+--- a/drivers/clk/bcm/clk-cygnus.c
++++ b/drivers/clk/bcm/clk-cygnus.c
+@@ -34,9 +34,11 @@
+ { .offset = o, .en_shift = es, .high_shift = hs, \
+ .high_width = hw, .low_shift = ls, .low_width = lw }
+
+-#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+- .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
+- .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
++#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
++ .p_reset_shift = prs }
++
++#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
++ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+ #define VCO_CTRL_VAL(uo, lo) { .u_offset = uo, .l_offset = lo }
+@@ -56,7 +58,8 @@ static const struct iproc_pll_ctrl genpl
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_HAS_NDIV_FRAC |
+ IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 1, 0),
+- .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
++ .reset = RESET_VAL(0x0, 11, 10),
++ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .sw_ctrl = SW_CTRL_VAL(0x10, 31),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+@@ -114,7 +117,8 @@ CLK_OF_DECLARE(cygnus_genpll, "brcm,cygn
+ static const struct iproc_pll_ctrl lcpll0 = {
+ .flags = IPROC_CLK_AON | IPROC_CLK_PLL_NEEDS_SW_CFG,
+ .aon = AON_VAL(0x0, 2, 5, 4),
+- .reset = RESET_VAL(0x0, 31, 30, 27, 3, 23, 4, 19, 4),
++ .reset = RESET_VAL(0x0, 31, 30),
++ .dig_filter = DF_VAL(0x0, 27, 3, 23, 4, 19, 4),
+ .sw_ctrl = SW_CTRL_VAL(0x4, 31),
+ .ndiv_int = REG_VAL(0x4, 16, 10),
+ .pdiv = REG_VAL(0x4, 26, 4),
+@@ -191,7 +195,8 @@ static const struct iproc_pll_ctrl mipip
+ IPROC_CLK_NEEDS_READ_BACK,
+ .aon = AON_VAL(0x0, 4, 17, 16),
+ .asiu = ASIU_GATE_VAL(0x0, 3),
+- .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 4),
++ .reset = RESET_VAL(0x0, 11, 10),
++ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 4),
+ .ndiv_int = REG_VAL(0x10, 20, 10),
+ .ndiv_frac = REG_VAL(0x10, 0, 20),
+ .pdiv = REG_VAL(0x14, 0, 4),
+--- a/drivers/clk/bcm/clk-iproc-pll.c
++++ b/drivers/clk/bcm/clk-iproc-pll.c
+@@ -224,13 +224,17 @@ static void __pll_bring_out_reset(struct
+ u32 val;
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
++ const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
++
++ val = readl(pll->pll_base + dig_filter->offset);
++ val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
++ bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
++ bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
++ val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
++ ka << dig_filter->ka_shift;
++ iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
+
+ val = readl(pll->pll_base + reset->offset);
+- val &= ~(bit_mask(reset->ki_width) << reset->ki_shift |
+- bit_mask(reset->kp_width) << reset->kp_shift |
+- bit_mask(reset->ka_width) << reset->ka_shift);
+- val |= ki << reset->ki_shift | kp << reset->kp_shift |
+- ka << reset->ka_shift;
+ val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
+ iproc_pll_write(pll, pll->pll_base, reset->offset, val);
+ }
+--- a/drivers/clk/bcm/clk-iproc.h
++++ b/drivers/clk/bcm/clk-iproc.h
+@@ -94,12 +94,19 @@ struct iproc_pll_aon_pwr_ctrl {
+ };
+
+ /*
+- * Control of the PLL reset, with Ki, Kp, and Ka parameters
++ * Control of the PLL reset
+ */
+ struct iproc_pll_reset_ctrl {
+ unsigned int offset;
+ unsigned int reset_shift;
+ unsigned int p_reset_shift;
++};
++
++/*
++ * Control of the Ki, Kp, and Ka parameters
++ */
++struct iproc_pll_dig_filter_ctrl {
++ unsigned int offset;
+ unsigned int ki_shift;
+ unsigned int ki_width;
+ unsigned int kp_shift;
+@@ -129,6 +136,7 @@ struct iproc_pll_ctrl {
+ struct iproc_pll_aon_pwr_ctrl aon;
+ struct iproc_asiu_gate asiu;
+ struct iproc_pll_reset_ctrl reset;
++ struct iproc_pll_dig_filter_ctrl dig_filter;
+ struct iproc_pll_sw_ctrl sw_ctrl;
+ struct iproc_clk_reg_op ndiv_int;
+ struct iproc_clk_reg_op ndiv_frac;
+--- a/drivers/clk/bcm/clk-nsp.c
++++ b/drivers/clk/bcm/clk-nsp.c
+@@ -26,9 +26,11 @@
+ #define AON_VAL(o, pw, ps, is) { .offset = o, .pwr_width = pw, \
+ .pwr_shift = ps, .iso_shift = is }
+
+-#define RESET_VAL(o, rs, prs, kis, kiw, kps, kpw, kas, kaw) { .offset = o, \
+- .reset_shift = rs, .p_reset_shift = prs, .ki_shift = kis, \
+- .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
++#define RESET_VAL(o, rs, prs) { .offset = o, .reset_shift = rs, \
++ .p_reset_shift = prs }
++
++#define DF_VAL(o, kis, kiw, kps, kpw, kas, kaw) { .offset = o, .ki_shift = kis,\
++ .ki_width = kiw, .kp_shift = kps, .kp_width = kpw, .ka_shift = kas, \
+ .ka_width = kaw }
+
+ #define ENABLE_VAL(o, es, hs, bs) { .offset = o, .enable_shift = es, \
+@@ -43,7 +45,8 @@ CLK_OF_DECLARE(nsp_armpll, "brcm,nsp-arm
+ static const struct iproc_pll_ctrl genpll = {
+ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+ .aon = AON_VAL(0x0, 1, 12, 0),
+- .reset = RESET_VAL(0x0, 11, 10, 4, 3, 0, 4, 7, 3),
++ .reset = RESET_VAL(0x0, 11, 10),
++ .dig_filter = DF_VAL(0x0, 4, 3, 0, 4, 7, 3),
+ .ndiv_int = REG_VAL(0x14, 20, 10),
+ .ndiv_frac = REG_VAL(0x14, 0, 20),
+ .pdiv = REG_VAL(0x18, 24, 3),
+@@ -99,7 +102,8 @@ CLK_OF_DECLARE(nsp_genpll_clk, "brcm,nsp
+ static const struct iproc_pll_ctrl lcpll0 = {
+ .flags = IPROC_CLK_PLL_HAS_NDIV_FRAC | IPROC_CLK_EMBED_PWRCTRL,
+ .aon = AON_VAL(0x0, 1, 24, 0),
+- .reset = RESET_VAL(0x0, 23, 22, 16, 3, 12, 4, 19, 4),
++ .reset = RESET_VAL(0x0, 23, 22),
++ .dig_filter = DF_VAL(0x0, 16, 3, 12, 4, 19, 4),
+ .ndiv_int = REG_VAL(0x4, 20, 8),
+ .ndiv_frac = REG_VAL(0x4, 0, 20),
+ .pdiv = REG_VAL(0x4, 28, 3),
--- /dev/null
+From eeb32564795a3584dba6281f445ff2aa552be36b Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Thu, 15 Oct 2015 15:48:30 -0400
+Subject: [PATCH 49/50] clk: iproc: Separate status and control variables
+
+Some PLLs have separate registers for Status and Control. The means the
+pll_base needs to be split into 2 new variables, so that those PLLs can
+specify device tree registers for those independently. Also, add a new
+driver flag to identify this presence of the split, and let the driver
+know that additional registers need to be used.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ drivers/clk/bcm/clk-iproc-pll.c | 96 ++++++++++++++++++++++++-----------------
+ drivers/clk/bcm/clk-iproc.h | 6 +++
+ 2 files changed, 62 insertions(+), 40 deletions(-)
+
+--- a/drivers/clk/bcm/clk-iproc-pll.c
++++ b/drivers/clk/bcm/clk-iproc-pll.c
+@@ -74,7 +74,8 @@ struct iproc_clk {
+ };
+
+ struct iproc_pll {
+- void __iomem *pll_base;
++ void __iomem *status_base;
++ void __iomem *control_base;
+ void __iomem *pwr_base;
+ void __iomem *asiu_base;
+
+@@ -127,7 +128,7 @@ static int pll_wait_for_lock(struct ipro
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+
+ for (i = 0; i < LOCK_DELAY; i++) {
+- u32 val = readl(pll->pll_base + ctrl->status.offset);
++ u32 val = readl(pll->status_base + ctrl->status.offset);
+
+ if (val & (1 << ctrl->status.shift))
+ return 0;
+@@ -145,7 +146,7 @@ static void iproc_pll_write(const struct
+ writel(val, base + offset);
+
+ if (unlikely(ctrl->flags & IPROC_CLK_NEEDS_READ_BACK &&
+- base == pll->pll_base))
++ (base == pll->status_base || base == pll->control_base)))
+ val = readl(base + offset);
+ }
+
+@@ -161,9 +162,9 @@ static void __pll_disable(struct iproc_p
+ }
+
+ if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+- val = readl(pll->pll_base + ctrl->aon.offset);
++ val = readl(pll->control_base + ctrl->aon.offset);
+ val |= (bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+- iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+ }
+
+ if (pll->pwr_base) {
+@@ -184,9 +185,9 @@ static int __pll_enable(struct iproc_pll
+ u32 val;
+
+ if (ctrl->flags & IPROC_CLK_EMBED_PWRCTRL) {
+- val = readl(pll->pll_base + ctrl->aon.offset);
++ val = readl(pll->control_base + ctrl->aon.offset);
+ val &= ~(bit_mask(ctrl->aon.pwr_width) << ctrl->aon.pwr_shift);
+- iproc_pll_write(pll, pll->pll_base, ctrl->aon.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->aon.offset, val);
+ }
+
+ if (pll->pwr_base) {
+@@ -213,9 +214,9 @@ static void __pll_put_in_reset(struct ip
+ const struct iproc_pll_ctrl *ctrl = pll->ctrl;
+ const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+
+- val = readl(pll->pll_base + reset->offset);
++ val = readl(pll->control_base + reset->offset);
+ val &= ~(1 << reset->reset_shift | 1 << reset->p_reset_shift);
+- iproc_pll_write(pll, pll->pll_base, reset->offset, val);
++ iproc_pll_write(pll, pll->control_base, reset->offset, val);
+ }
+
+ static void __pll_bring_out_reset(struct iproc_pll *pll, unsigned int kp,
+@@ -226,17 +227,17 @@ static void __pll_bring_out_reset(struct
+ const struct iproc_pll_reset_ctrl *reset = &ctrl->reset;
+ const struct iproc_pll_dig_filter_ctrl *dig_filter = &ctrl->dig_filter;
+
+- val = readl(pll->pll_base + dig_filter->offset);
++ val = readl(pll->control_base + dig_filter->offset);
+ val &= ~(bit_mask(dig_filter->ki_width) << dig_filter->ki_shift |
+ bit_mask(dig_filter->kp_width) << dig_filter->kp_shift |
+ bit_mask(dig_filter->ka_width) << dig_filter->ka_shift);
+ val |= ki << dig_filter->ki_shift | kp << dig_filter->kp_shift |
+ ka << dig_filter->ka_shift;
+- iproc_pll_write(pll, pll->pll_base, dig_filter->offset, val);
++ iproc_pll_write(pll, pll->control_base, dig_filter->offset, val);
+
+- val = readl(pll->pll_base + reset->offset);
++ val = readl(pll->control_base + reset->offset);
+ val |= 1 << reset->reset_shift | 1 << reset->p_reset_shift;
+- iproc_pll_write(pll, pll->pll_base, reset->offset, val);
++ iproc_pll_write(pll, pll->control_base, reset->offset, val);
+ }
+
+ static int pll_set_rate(struct iproc_clk *clk, unsigned int rate_index,
+@@ -291,9 +292,9 @@ static int pll_set_rate(struct iproc_clk
+ /* put PLL in reset */
+ __pll_put_in_reset(pll);
+
+- iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.u_offset, 0);
++ iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.u_offset, 0);
+
+- val = readl(pll->pll_base + ctrl->vco_ctrl.l_offset);
++ val = readl(pll->control_base + ctrl->vco_ctrl.l_offset);
+
+ if (rate >= VCO_LOW && rate < VCO_MID)
+ val |= (1 << PLL_VCO_LOW_SHIFT);
+@@ -303,29 +304,29 @@ static int pll_set_rate(struct iproc_clk
+ else
+ val |= (1 << PLL_VCO_HIGH_SHIFT);
+
+- iproc_pll_write(pll, pll->pll_base, ctrl->vco_ctrl.l_offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->vco_ctrl.l_offset, val);
+
+ /* program integer part of NDIV */
+- val = readl(pll->pll_base + ctrl->ndiv_int.offset);
++ val = readl(pll->control_base + ctrl->ndiv_int.offset);
+ val &= ~(bit_mask(ctrl->ndiv_int.width) << ctrl->ndiv_int.shift);
+ val |= vco->ndiv_int << ctrl->ndiv_int.shift;
+- iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_int.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->ndiv_int.offset, val);
+
+ /* program fractional part of NDIV */
+ if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+- val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
++ val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+ val &= ~(bit_mask(ctrl->ndiv_frac.width) <<
+ ctrl->ndiv_frac.shift);
+ val |= vco->ndiv_frac << ctrl->ndiv_frac.shift;
+- iproc_pll_write(pll, pll->pll_base, ctrl->ndiv_frac.offset,
++ iproc_pll_write(pll, pll->control_base, ctrl->ndiv_frac.offset,
+ val);
+ }
+
+ /* program PDIV */
+- val = readl(pll->pll_base + ctrl->pdiv.offset);
++ val = readl(pll->control_base + ctrl->pdiv.offset);
+ val &= ~(bit_mask(ctrl->pdiv.width) << ctrl->pdiv.shift);
+ val |= vco->pdiv << ctrl->pdiv.shift;
+- iproc_pll_write(pll, pll->pll_base, ctrl->pdiv.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->pdiv.offset, val);
+
+ __pll_bring_out_reset(pll, kp, ka, ki);
+
+@@ -372,7 +373,7 @@ static unsigned long iproc_pll_recalc_ra
+ return 0;
+
+ /* PLL needs to be locked */
+- val = readl(pll->pll_base + ctrl->status.offset);
++ val = readl(pll->status_base + ctrl->status.offset);
+ if ((val & (1 << ctrl->status.shift)) == 0) {
+ clk->rate = 0;
+ return 0;
+@@ -383,19 +384,19 @@ static unsigned long iproc_pll_recalc_ra
+ *
+ * ((ndiv_int + ndiv_frac / 2^20) * (parent clock rate / pdiv)
+ */
+- val = readl(pll->pll_base + ctrl->ndiv_int.offset);
++ val = readl(pll->control_base + ctrl->ndiv_int.offset);
+ ndiv_int = (val >> ctrl->ndiv_int.shift) &
+ bit_mask(ctrl->ndiv_int.width);
+ ndiv = ndiv_int << 20;
+
+ if (ctrl->flags & IPROC_CLK_PLL_HAS_NDIV_FRAC) {
+- val = readl(pll->pll_base + ctrl->ndiv_frac.offset);
++ val = readl(pll->control_base + ctrl->ndiv_frac.offset);
+ ndiv_frac = (val >> ctrl->ndiv_frac.shift) &
+ bit_mask(ctrl->ndiv_frac.width);
+ ndiv += ndiv_frac;
+ }
+
+- val = readl(pll->pll_base + ctrl->pdiv.offset);
++ val = readl(pll->control_base + ctrl->pdiv.offset);
+ pdiv = (val >> ctrl->pdiv.shift) & bit_mask(ctrl->pdiv.width);
+
+ clk->rate = (ndiv * parent_rate) >> 20;
+@@ -460,14 +461,14 @@ static int iproc_clk_enable(struct clk_h
+ u32 val;
+
+ /* channel enable is active low */
+- val = readl(pll->pll_base + ctrl->enable.offset);
++ val = readl(pll->control_base + ctrl->enable.offset);
+ val &= ~(1 << ctrl->enable.enable_shift);
+- iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+
+ /* also make sure channel is not held */
+- val = readl(pll->pll_base + ctrl->enable.offset);
++ val = readl(pll->control_base + ctrl->enable.offset);
+ val &= ~(1 << ctrl->enable.hold_shift);
+- iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+
+ return 0;
+ }
+@@ -482,9 +483,9 @@ static void iproc_clk_disable(struct clk
+ if (ctrl->flags & IPROC_CLK_AON)
+ return;
+
+- val = readl(pll->pll_base + ctrl->enable.offset);
++ val = readl(pll->control_base + ctrl->enable.offset);
+ val |= 1 << ctrl->enable.enable_shift;
+- iproc_pll_write(pll, pll->pll_base, ctrl->enable.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->enable.offset, val);
+ }
+
+ static unsigned long iproc_clk_recalc_rate(struct clk_hw *hw,
+@@ -499,7 +500,7 @@ static unsigned long iproc_clk_recalc_ra
+ if (parent_rate == 0)
+ return 0;
+
+- val = readl(pll->pll_base + ctrl->mdiv.offset);
++ val = readl(pll->control_base + ctrl->mdiv.offset);
+ mdiv = (val >> ctrl->mdiv.shift) & bit_mask(ctrl->mdiv.width);
+ if (mdiv == 0)
+ mdiv = 256;
+@@ -546,14 +547,14 @@ static int iproc_clk_set_rate(struct clk
+ if (div > 256)
+ return -EINVAL;
+
+- val = readl(pll->pll_base + ctrl->mdiv.offset);
++ val = readl(pll->control_base + ctrl->mdiv.offset);
+ if (div == 256) {
+ val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+ } else {
+ val &= ~(bit_mask(ctrl->mdiv.width) << ctrl->mdiv.shift);
+ val |= div << ctrl->mdiv.shift;
+ }
+- iproc_pll_write(pll, pll->pll_base, ctrl->mdiv.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->mdiv.offset, val);
+ clk->rate = parent_rate / div;
+
+ return 0;
+@@ -578,9 +579,10 @@ static void iproc_pll_sw_cfg(struct ipro
+ if (ctrl->flags & IPROC_CLK_PLL_NEEDS_SW_CFG) {
+ u32 val;
+
+- val = readl(pll->pll_base + ctrl->sw_ctrl.offset);
++ val = readl(pll->control_base + ctrl->sw_ctrl.offset);
+ val |= BIT(ctrl->sw_ctrl.shift);
+- iproc_pll_write(pll, pll->pll_base, ctrl->sw_ctrl.offset, val);
++ iproc_pll_write(pll, pll->control_base, ctrl->sw_ctrl.offset,
++ val);
+ }
+ }
+
+@@ -615,8 +617,8 @@ void __init iproc_pll_clk_setup(struct d
+ if (WARN_ON(!pll->clks))
+ goto err_clks;
+
+- pll->pll_base = of_iomap(node, 0);
+- if (WARN_ON(!pll->pll_base))
++ pll->control_base = of_iomap(node, 0);
++ if (WARN_ON(!pll->control_base))
+ goto err_pll_iomap;
+
+ /* Some SoCs do not require the pwr_base, thus failing is not fatal */
+@@ -629,6 +631,16 @@ void __init iproc_pll_clk_setup(struct d
+ goto err_asiu_iomap;
+ }
+
++ if (pll_ctrl->flags & IPROC_CLK_PLL_SPLIT_STAT_CTRL) {
++ /* Some SoCs have a split status/control. If this does not
++ * exist, assume they are unified.
++ */
++ pll->status_base = of_iomap(node, 2);
++ if (!pll->status_base)
++ goto err_status_iomap;
++ } else
++ pll->status_base = pll->control_base;
++
+ /* initialize and register the PLL itself */
+ pll->ctrl = pll_ctrl;
+
+@@ -699,6 +711,10 @@ err_clk_register:
+ clk_unregister(pll->clk_data.clks[i]);
+
+ err_pll_register:
++ if (pll->status_base != pll->control_base)
++ iounmap(pll->status_base);
++
++err_status_iomap:
+ if (pll->asiu_base)
+ iounmap(pll->asiu_base);
+
+@@ -706,7 +722,7 @@ err_asiu_iomap:
+ if (pll->pwr_base)
+ iounmap(pll->pwr_base);
+
+- iounmap(pll->pll_base);
++ iounmap(pll->control_base);
+
+ err_pll_iomap:
+ kfree(pll->clks);
+--- a/drivers/clk/bcm/clk-iproc.h
++++ b/drivers/clk/bcm/clk-iproc.h
+@@ -55,6 +55,12 @@
+ #define IPROC_CLK_EMBED_PWRCTRL BIT(5)
+
+ /*
++ * Some PLLs have separate registers for Status and Control. Identify this to
++ * let the driver know if additional registers need to be used
++ */
++#define IPROC_CLK_PLL_SPLIT_STAT_CTRL BIT(6)
++
++/*
+ * Parameters for VCO frequency configuration
+ *
+ * VCO frequency =
--- /dev/null
+From e96ef422d0095fe9ae39b03c0805a0db8ff7e382 Mon Sep 17 00:00:00 2001
+From: Jon Mason <jonmason@broadcom.com>
+Date: Tue, 13 Oct 2015 17:22:25 -0400
+Subject: [PATCH 50/50] ARM: dts: enable clock support for BCM5301X
+
+Replace current device tree dummy clocks with real clock support for
+Broadcom Northstar SoCs.
+
+Signed-off-by: Jon Mason <jonmason@broadcom.com>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 88 ++++++++++++++++++++++++++++++++---------
+ 1 file changed, 69 insertions(+), 19 deletions(-)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -8,6 +8,7 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include <dt-bindings/clock/bcm-nsp.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+@@ -42,41 +43,48 @@
+
+ mpcore {
+ compatible = "simple-bus";
+- ranges = <0x00000000 0x19020000 0x00003000>;
++ ranges = <0x00000000 0x19000000 0x00023000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+- scu@0000 {
++ a9pll: arm_clk@00000 {
++ #clock-cells = <0>;
++ compatible = "brcm,nsp-armpll";
++ clocks = <&osc>;
++ reg = <0x00000 0x1000>;
++ };
++
++ scu@20000 {
+ compatible = "arm,cortex-a9-scu";
+- reg = <0x0000 0x100>;
++ reg = <0x20000 0x100>;
+ };
+
+- timer@0200 {
++ timer@20200 {
+ compatible = "arm,cortex-a9-global-timer";
+- reg = <0x0200 0x100>;
++ reg = <0x20200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&clk_periph>;
++ clocks = <&periph_clk>;
+ };
+
+- local-timer@0600 {
++ local-timer@20600 {
+ compatible = "arm,cortex-a9-twd-timer";
+- reg = <0x0600 0x100>;
++ reg = <0x20600 0x100>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+- clocks = <&clk_periph>;
++ clocks = <&periph_clk>;
+ };
+
+- gic: interrupt-controller@1000 {
++ gic: interrupt-controller@21000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+- reg = <0x1000 0x1000>,
+- <0x0100 0x100>;
++ reg = <0x21000 0x1000>,
++ <0x20100 0x100>;
+ };
+
+- L2: cache-controller@2000 {
++ L2: cache-controller@22000 {
+ compatible = "arm,pl310-cache";
+- reg = <0x2000 0x1000>;
++ reg = <0x22000 0x1000>;
+ cache-unified;
+ arm,shared-override;
+ prefetch-data = <1>;
+@@ -94,14 +102,37 @@
+
+ clocks {
+ #address-cells = <1>;
+- #size-cells = <0>;
++ #size-cells = <1>;
++ ranges;
+
+- /* As long as we do not have a real clock driver us this
+- * fixed clock */
+- clk_periph: periph {
++ osc: oscillator {
++ #clock-cells = <0>;
+ compatible = "fixed-clock";
++ clock-frequency = <25000000>;
++ };
++
++ iprocmed: iprocmed {
+ #clock-cells = <0>;
+- clock-frequency = <400000000>;
++ compatible = "fixed-factor-clock";
++ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
++ clock-div = <2>;
++ clock-mult = <1>;
++ };
++
++ iprocslow: iprocslow {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;
++ clock-div = <4>;
++ clock-mult = <1>;
++ };
++
++ periph_clk: periph_clk {
++ #clock-cells = <0>;
++ compatible = "fixed-factor-clock";
++ clocks = <&a9pll>;
++ clock-div = <2>;
++ clock-mult = <1>;
+ };
+ };
+
+@@ -189,4 +220,23 @@
+
+ brcm,nand-has-wp;
+ };
++
++ lcpll0: lcpll0@1800c100 {
++ #clock-cells = <1>;
++ compatible = "brcm,nsp-lcpll0";
++ reg = <0x1800c100 0x14>;
++ clocks = <&osc>;
++ clock-output-names = "lcpll0", "pcie_phy", "sdio",
++ "ddr_phy";
++ };
++
++ genpll: genpll@1800c140 {
++ #clock-cells = <1>;
++ compatible = "brcm,nsp-genpll";
++ reg = <0x1800c140 0x24>;
++ clocks = <&osc>;
++ clock-output-names = "genpll", "phy", "ethernetclk",
++ "usbclk", "iprocfast", "sata1",
++ "sata2";
++ };
+ };
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -105,6 +105,10 @@
+@@ -136,6 +136,10 @@
};
};
projects / openwrt / svn-archive / archive.git / commitdiff