--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ARCH_SUPPORTS_OPROFILE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_AUDIT=y
+CONFIG_AUDIT_GENERIC=y
+CONFIG_BASE_SMALL=0
+# CONFIG_BCM47XX is not set
+CONFIG_BCM63XX=y
+CONFIG_BCM63XX_CPU_6338=y
+CONFIG_BCM63XX_CPU_6345=y
+CONFIG_BCM63XX_CPU_6348=y
+CONFIG_BCM63XX_CPU_6358=y
+CONFIG_BCM63XX_ENET=y
+CONFIG_BCM63XX_PHY=y
+CONFIG_BCM63XX_WDT=y
+CONFIG_BINARY_PRINTF=y
+CONFIG_BITREVERSE=y
+CONFIG_BLK_DEV_IO_TRACE=y
+CONFIG_BOARD_BCM963XX=y
+# CONFIG_BOARD_LIVEBOX is not set
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
+# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
+CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_CAVIUM_OCTEON is not set
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R5500 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+CONFIG_CRAMFS=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_ELF_CORE=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVICE=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HAMRADIO is not set
+CONFIG_HARDWARE_WATCHPOINTS=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_I2C is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_IRQ_CPU=y
+# CONFIG_ISDN is not set
+CONFIG_KEXEC=y
+CONFIG_LBD=y
+CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_TX39XX is not set
+# CONFIG_MACH_TX49XX is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_COBALT is not set
+# CONFIG_MIPS_FPU_EMU is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MACHINE is not set
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MTD_BCM963XX=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_BE_BYTE_SWAP=y
+# CONFIG_MTD_CFI_GEOMETRY is not set
+# CONFIG_MTD_CFI_NOSWAP is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_NATSEMI is not set
+# CONFIG_NET_DROP_MONITOR is not set
+CONFIG_NOP_TRACER=y
+# CONFIG_NO_IOPORT is not set
+# CONFIG_NXP_STB220 is not set
+# CONFIG_NXP_STB225 is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+# CONFIG_PCSPKR_PLATFORM is not set
+CONFIG_PHYLIB=y
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_PROBE_INITRD_HEADER is not set
+# CONFIG_PROM_EMU is not set
+CONFIG_RELAY=y
+CONFIG_RING_BUFFER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP28 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_SSB=y
+CONFIG_SSB_B43_PCI_BRIDGE=y
+# CONFIG_SSB_DRIVER_MIPS is not set
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCIHOST_POSSIBLE=y
+CONFIG_SSB_SPROM=y
+CONFIG_STACKTRACE=y
+CONFIG_SWAP_IO_SPACE=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_TRACEPOINTS=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_TRAD_SIGNALS=y
+CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_SUPPORT=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+From a9f65413f9ea81ef2208da66a3db9cb8a9020eef Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 15:53:08 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add Broadcom 63xx CPU definitions.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/kernel/cpu-probe.c | 25 +++++++++++++++++++++++++
+ arch/mips/mm/tlbex.c | 4 ++++
+ arch/mips/include/asm/cpu.h | 7 +++++++
+ 3 files changed, 36 insertions(+), 0 deletions(-)
+
+--- a/arch/mips/kernel/cpu-probe.c
++++ b/arch/mips/kernel/cpu-probe.c
+@@ -158,6 +158,9 @@ void __init check_wait(void)
+ case CPU_25KF:
+ case CPU_PR4450:
+ case CPU_BCM3302:
++ case CPU_BCM6338:
++ case CPU_BCM6348:
++ case CPU_BCM6358:
+ case CPU_CAVIUM_OCTEON:
+ cpu_wait = r4k_wait;
+ break;
+@@ -855,6 +858,7 @@ static inline void cpu_probe_broadcom(st
+ {
+ decode_configs(c);
+ switch (c->processor_id & 0xff00) {
++ /* same as PRID_IMP_BCM6338 */
+ case PRID_IMP_BCM3302:
+ c->cputype = CPU_BCM3302;
+ __cpu_name[cpu] = "Broadcom BCM3302";
+@@ -863,6 +867,26 @@ static inline void cpu_probe_broadcom(st
+ c->cputype = CPU_BCM4710;
+ __cpu_name[cpu] = "Broadcom BCM4710";
+ break;
++ case PRID_IMP_BCM6345:
++ c->cputype = CPU_BCM6345;
++ __cpu_name[cpu] = "Broadcom BCM6345";
++ break;
++ case PRID_IMP_BCM6348:
++ c->cputype = CPU_BCM6348;
++ __cpu_name[cpu] = "Broadcom BCM6348";
++ break;
++ case PRID_IMP_BCM4350:
++ switch (c->processor_id & 0xf0) {
++ case PRID_REV_BCM6358:
++ c->cputype = CPU_BCM6358;
++ __cpu_name[cpu] = "Broadcom BCM6358";
++ break;
++ default:
++ c->cputype = CPU_UNKNOWN;
++ __cpu_name[cpu] = "Broadcom BCM63xx";
++ break;
++ }
++ break;
+ }
+ }
+
+--- a/arch/mips/mm/tlbex.c
++++ b/arch/mips/mm/tlbex.c
+@@ -310,6 +310,10 @@ static void __cpuinit build_tlb_write_en
+ case CPU_BCM3302:
+ case CPU_BCM4710:
+ case CPU_LOONGSON2:
++ case CPU_BCM6338:
++ case CPU_BCM6345:
++ case CPU_BCM6348:
++ case CPU_BCM6358:
+ case CPU_CAVIUM_OCTEON:
+ case CPU_R5500:
+ if (m4kc_tlbp_war())
+--- a/arch/mips/include/asm/cpu.h
++++ b/arch/mips/include/asm/cpu.h
+@@ -113,6 +113,12 @@
+
+ #define PRID_IMP_BCM4710 0x4000
+ #define PRID_IMP_BCM3302 0x9000
++#define PRID_IMP_BCM6338 0x9000
++#define PRID_IMP_BCM6345 0x8000
++#define PRID_IMP_BCM6348 0x9100
++#define PRID_IMP_BCM4350 0xA000
++#define PRID_REV_BCM6358 0x0010
++#define PRID_REV_BCM6368 0x0030
+
+ /*
+ * These are the PRID's for when 23:16 == PRID_COMP_CAVIUM
+@@ -210,6 +216,7 @@ enum cpu_type_enum {
+ */
+ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
+ CPU_ALCHEMY, CPU_PR4450, CPU_BCM3302, CPU_BCM4710,
++ CPU_BCM6338, CPU_BCM6345, CPU_BCM6348, CPU_BCM6358,
+
+ /*
+ * MIPS64 class processors
--- /dev/null
+From 0713aadd2a4e543b69022aa40bdec3e1dc5bc1e5 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 18 Aug 2008 13:56:57 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add support for Broadcom 63xx CPUs.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/Kconfig | 16 +
+ arch/mips/Makefile | 7 +
+ arch/mips/bcm63xx/Kconfig | 9 +
+ arch/mips/bcm63xx/Makefile | 2 +
+ arch/mips/bcm63xx/clk.c | 220 ++++++
+ arch/mips/bcm63xx/cpu.c | 245 +++++++
+ arch/mips/bcm63xx/cs.c | 144 ++++
+ arch/mips/bcm63xx/early_printk.c | 30 +
+ arch/mips/bcm63xx/gpio.c | 98 +++
+ arch/mips/bcm63xx/irq.c | 253 +++++++
+ arch/mips/bcm63xx/prom.c | 43 ++
+ arch/mips/bcm63xx/setup.c | 108 +++
+ arch/mips/bcm63xx/timer.c | 205 ++++++
+ arch/mips/include/asm/fixmap.h | 4 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h | 11 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 314 +++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h | 10 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 14 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 93 +++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h | 15 +
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 728 ++++++++++++++++++++
+ arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h | 11 +
+ .../asm-mips/mach-bcm63xx/cpu-feature-overrides.h | 51 ++
+ arch/mips/include/asm/mach-bcm63xx/gpio.h | 52 ++
+ arch/mips/include/asm/mach-bcm63xx/war.h | 25 +
+ 25 files changed, 2708 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/Kconfig
+ create mode 100644 arch/mips/bcm63xx/Makefile
+ create mode 100644 arch/mips/bcm63xx/clk.c
+ create mode 100644 arch/mips/bcm63xx/cpu.c
+ create mode 100644 arch/mips/bcm63xx/cs.c
+ create mode 100644 arch/mips/bcm63xx/early_printk.c
+ create mode 100644 arch/mips/bcm63xx/gpio.c
+ create mode 100644 arch/mips/bcm63xx/irq.c
+ create mode 100644 arch/mips/bcm63xx/prom.c
+ create mode 100644 arch/mips/bcm63xx/setup.c
+ create mode 100644 arch/mips/bcm63xx/timer.c
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/gpio.h
+ create mode 100644 arch/mips/include/asm/mach-bcm63xx/war.h
+
+--- a/arch/mips/Kconfig
++++ b/arch/mips/Kconfig
+@@ -60,6 +60,21 @@ config BCM47XX
+ help
+ Support for BCM47XX based boards
+
++config BCM63XX
++ bool "Broadcom 63xx based boards"
++ select CEVT_R4K
++ select CSRC_R4K
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_HAS_EARLY_PRINTK
++ select SWAP_IO_SPACE
++ select ARCH_REQUIRE_GPIOLIB
++ help
++ Support for BCM63XX based boards
++
+ config MIPS_COBALT
+ bool "Cobalt Server"
+ select CEVT_R4K
+@@ -635,6 +650,7 @@ endchoice
+
+ source "arch/mips/alchemy/Kconfig"
+ source "arch/mips/basler/excite/Kconfig"
++source "arch/mips/bcm63xx/Kconfig"
+ source "arch/mips/jazz/Kconfig"
+ source "arch/mips/lasat/Kconfig"
+ source "arch/mips/pmc-sierra/Kconfig"
+--- a/arch/mips/Makefile
++++ b/arch/mips/Makefile
+@@ -551,6 +551,13 @@ cflags-$(CONFIG_BCM47XX) += -I$(srctree)
+ load-$(CONFIG_BCM47XX) := 0xffffffff80001000
+
+ #
++# Broadcom BCM63XX boards
++#
++core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/
++cflags-$(CONFIG_BCM63XX) += -Iarch/mips/include/asm/mach-bcm63xx/
++load-$(CONFIG_BCM63XX) := 0xffffffff80010000
++
++#
+ # SNI RM
+ #
+ core-$(CONFIG_SNI_RM) += arch/mips/sni/
+--- a/arch/mips/include/asm/fixmap.h
++++ b/arch/mips/include/asm/fixmap.h
+@@ -67,11 +67,15 @@ enum fixed_addresses {
+ * the start of the fixmap, and leave one page empty
+ * at the top of mem..
+ */
++#ifdef CONFIG_BCM63XX
++#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000)
++#else
+ #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX)
+ #define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000))
+ #else
+ #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000)
+ #endif
++#endif
+ #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT)
+ #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE)
+
--- /dev/null
+From 6c489656b09998ed6a6f857e01ccf630e29358dd Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 19:35:55 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add serial driver for bcm63xx integrated UART.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-uart.c | 41 +
+ drivers/serial/Kconfig | 19 +
+ drivers/serial/Makefile | 1 +
+ drivers/serial/bcm63xx_uart.c | 890 ++++++++++++++++++++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h | 6 +
+ include/linux/serial_core.h | 2 +
+ 7 files changed, 960 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-uart.c
+ create mode 100644 drivers/serial/bcm63xx_uart.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h
+
+--- a/drivers/serial/Kconfig
++++ b/drivers/serial/Kconfig
+@@ -1433,4 +1433,23 @@ config SPORT_BAUD_RATE
+ default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
+ default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+
++config SERIAL_BCM63XX
++ tristate "bcm63xx serial port support"
++ select SERIAL_CORE
++ depends on BCM63XX
++ help
++ If you have a bcm63xx CPU, you can enable its onboard
++ serial port by enabling this options.
++
++ To compile this driver as a module, choose M here: the
++ module will be called bcm963xx_uart.
++
++config SERIAL_BCM63XX_CONSOLE
++ bool "Console on bcm63xx serial port"
++ depends on SERIAL_BCM63XX
++ select SERIAL_CORE_CONSOLE
++ help
++ If you have enabled the serial port on the bcm63xx CPU
++ you can make it the console by answering Y to this option.
++
+ endmenu
+--- a/drivers/serial/Makefile
++++ b/drivers/serial/Makefile
+@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711
+ obj-$(CONFIG_SERIAL_PXA) += pxa.o
+ obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
+ obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
++obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
+ obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
+ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
+ obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -167,6 +167,8 @@
+ /* MAX3100 */
+ #define PORT_MAX3100 86
+
++#define PORT_BCM63XX 83
++
+ #ifdef __KERNEL__
+
+ #include <linux/compiler.h>
--- /dev/null
+From 2a7fa2dbbf68650644f807a50cc2d84ca30835c1 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Sun, 21 Sep 2008 04:47:13 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add PCI support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 2 +
+ arch/mips/bcm63xx/setup.c | 2 +
+ arch/mips/pci/Makefile | 2 +
+ arch/mips/pci/fixup-bcm63xx.c | 21 +++
+ arch/mips/pci/ops-bcm63xx.c | 179 +++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.c | 178 ++++++++++++++++++++++
+ arch/mips/pci/pci-bcm63xx.h | 27 ++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h | 6 +
+ 8 files changed, 417 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/pci/fixup-bcm63xx.c
+ create mode 100644 arch/mips/pci/ops-bcm63xx.c
+ create mode 100644 arch/mips/pci/pci-bcm63xx.c
+ create mode 100644 arch/mips/pci/pci-bcm63xx.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h
+
+--- a/arch/mips/pci/Makefile
++++ b/arch/mips/pci/Makefile
+@@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o
+ obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
+ obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o
+ obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o
++obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
++ ops-bcm63xx.o
+
+ #
+ # These are still pretty much in the old state, watch, go blind.
--- /dev/null
+From b17597be763621ba63534fda6e1ea0a802be2087 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Fri, 18 Jul 2008 21:18:51 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add PCMCIA & Cardbus support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-pcmcia.c | 135 +++++
+ drivers/pcmcia/Kconfig | 4 +
+ drivers/pcmcia/Makefile | 1 +
+ drivers/pcmcia/bcm63xx_pcmcia.c | 521 ++++++++++++++++++++
+ drivers/pcmcia/bcm63xx_pcmcia.h | 65 +++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h | 13 +
+ 7 files changed, 740 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-pcmcia.c
+ create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.c
+ create mode 100644 drivers/pcmcia/bcm63xx_pcmcia.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h
+
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -192,6 +192,10 @@ config PCMCIA_AU1X00
+ tristate "Au1x00 pcmcia support"
+ depends on SOC_AU1X00 && PCMCIA
+
++config PCMCIA_BCM63XX
++ tristate "bcm63xx pcmcia support"
++ depends on BCM63XX && PCMCIA
++
+ config PCMCIA_SA1100
+ tristate "SA1100 support"
+ depends on ARM && ARCH_SA1100 && PCMCIA
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_
+ obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
+ obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
+ obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
++obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
+ obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
+ obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
--- /dev/null
+From f7416412febd7efc1d33c7506c81265719368667 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 21 Jul 2008 14:58:19 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add USB OHCI support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 6 +
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++++
+ drivers/usb/host/ohci-bcm63xx.c | 159 ++++++++++++++++++++
+ drivers/usb/host/ohci-hcd.c | 5 +
+ drivers/usb/host/ohci.h | 7 +-
+ .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 +
+ 7 files changed, 233 insertions(+), 1 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
+ create mode 100644 drivers/usb/host/ohci-bcm63xx.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
+
+--- a/drivers/usb/host/ohci-hcd.c
++++ b/drivers/usb/host/ohci-hcd.c
+@@ -1047,6 +1047,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER usb_hcd_pnx4008_driver
+ #endif
+
++#ifdef CONFIG_BCM63XX
++#include "ohci-bcm63xx.c"
++#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver
++#endif
++
+ #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7721) || \
+ defined(CONFIG_CPU_SUBTYPE_SH7763) || \
+--- a/drivers/usb/host/ohci.h
++++ b/drivers/usb/host/ohci.h
+@@ -536,6 +536,11 @@ static inline struct usb_hcd *ohci_to_hc
+ #define big_endian_mmio(ohci) 0 /* only little endian */
+ #endif
+
++#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
++#define readl_be(addr) __raw_readl((__force unsigned *)addr)
++#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
++#endif
++
+ /*
+ * Big-endian read/write functions are arch-specific.
+ * Other arches can be added if/when they're needed.
+@@ -646,7 +651,7 @@ static inline u32 hc32_to_cpup (const st
+ * some big-endian SOC implementations. Same thing happens with PSW access.
+ */
+
+-#ifdef CONFIG_PPC_MPC52xx
++#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
+ #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
+ #else
+ #define big_endian_frame_no_quirk(ohci) 0
--- /dev/null
+From 2940d1996c86c4c4dd7a82214f846d0c0b707165 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Mon, 21 Jul 2008 18:24:42 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add USB EHCI support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Kconfig | 2 +
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-usb-ehci.c | 50 +++++++
+ drivers/usb/host/ehci-bcm63xx.c | 152 ++++++++++++++++++++
+ drivers/usb/host/ehci-hcd.c | 5 +
+ drivers/usb/host/ehci.h | 5 +
+ .../asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 +
+ 7 files changed, 221 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
+ create mode 100644 drivers/usb/host/ehci-bcm63xx.c
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
+
+--- a/drivers/usb/host/ehci-hcd.c
++++ b/drivers/usb/host/ehci-hcd.c
+@@ -1072,6 +1072,11 @@ MODULE_LICENSE ("GPL");
+ #define PLATFORM_DRIVER ixp4xx_ehci_driver
+ #endif
+
++#ifdef CONFIG_BCM63XX
++#include "ehci-bcm63xx.c"
++#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
++#endif
++
+ #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
+ #error "missing bus glue for ehci-hcd"
+--- a/drivers/usb/host/ehci.h
++++ b/drivers/usb/host/ehci.h
+@@ -597,6 +597,11 @@ ehci_port_speed(struct ehci_hcd *ehci, u
+ #define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
+ #endif
+
++#if defined(CONFIG_MIPS) && defined(CONFIG_BCM63XX)
++#define readl_be(addr) __raw_readl((__force unsigned *)addr)
++#define writel_be(val, addr) __raw_writel(val, (__force unsigned *)addr)
++#endif
++
+ static inline unsigned int ehci_readl(const struct ehci_hcd *ehci,
+ __u32 __iomem * regs)
+ {
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -41,7 +41,7 @@ config USB_EHCI_HCD
+
+ config USB_EHCI_ROOT_HUB_TT
+ bool "Root Hub Transaction Translators"
+- depends on USB_EHCI_HCD
++ depends on USB_EHCI_HCD && !BCM63XX
+ ---help---
+ Some EHCI chips have vendor-specific extensions to integrate
+ transaction translators, so that no OHCI or UHCI companion
--- /dev/null
+From 49aa7ffcd9bd2d9a0af99fced7b8511160dbf345 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Sun, 21 Sep 2008 03:43:26 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet mac support.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ arch/mips/bcm63xx/Makefile | 1 +
+ arch/mips/bcm63xx/dev-enet.c | 158 ++
+ drivers/net/Kconfig | 9 +
+ drivers/net/Makefile | 1 +
+ drivers/net/bcm63xx_enet.c | 1894 ++++++++++++++++++++++
+ drivers/net/bcm63xx_enet.h | 294 ++++
+ include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h | 45 +
+ 7 files changed, 2402 insertions(+), 0 deletions(-)
+ create mode 100644 arch/mips/bcm63xx/dev-enet.c
+ create mode 100644 drivers/net/bcm63xx_enet.c
+ create mode 100644 drivers/net/bcm63xx_enet.h
+ create mode 100644 include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h
+
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -2035,6 +2035,15 @@ config ATL2
+ To compile this driver as a module, choose M here. The module
+ will be called atl2.
+
++config BCM63XX_ENET
++ tristate "Broadcom 63xx internal mac support"
++ depends on BCM63XX
++ select MII
++ select PHYLIB
++ help
++ This driver supports the ethernet MACs in the Broadcom 63xx
++ MIPS chipset family (BCM63XX).
++
+ source "drivers/net/fs_enet/Kconfig"
+
+ endif # NET_ETHERNET
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -130,6 +130,7 @@ obj-$(CONFIG_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_B44) += b44.o
+ obj-$(CONFIG_FORCEDETH) += forcedeth.o
+ obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
++obj-$(CONFIG_BCM63XX_ENET) += bcm63xx_enet.o
+ obj-$(CONFIG_AX88796) += ax88796.o
+
+ obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
--- /dev/null
+From 7eefcb968019804e024c8243e28afb1eebd674a2 Mon Sep 17 00:00:00 2001
+From: Maxime Bizon <mbizon@freebox.fr>
+Date: Sun, 21 Sep 2008 02:20:53 +0200
+Subject: [PATCH] [MIPS] BCM63XX: Add integrated ethernet PHY support for phylib.
+
+Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
+---
+ drivers/net/phy/Kconfig | 6 ++
+ drivers/net/phy/Makefile | 1 +
+ drivers/net/phy/bcm63xx.c | 132 +++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 139 insertions(+), 0 deletions(-)
+ create mode 100644 drivers/net/phy/bcm63xx.c
+
+--- a/drivers/net/phy/Kconfig
++++ b/drivers/net/phy/Kconfig
+@@ -62,6 +62,12 @@ config BROADCOM_PHY
+ Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
+ and BCM5482 PHYs.
+
++config BCM63XX_PHY
++ tristate "Drivers for Broadcom 63xx SOCs internal PHY"
++ depends on BCM63XX
++ ---help---
++ Currently supports the 6348 and 6358 PHYs.
++
+ config ICPLUS_PHY
+ tristate "Drivers for ICPlus PHYs"
+ ---help---
+--- a/drivers/net/phy/Makefile
++++ b/drivers/net/phy/Makefile
+@@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
+ obj-$(CONFIG_SMSC_PHY) += smsc.o
+ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
+ obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
++obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
+ obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+ obj-$(CONFIG_ADM6996_PHY) += adm6996.o
+ obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o
--- /dev/null
+--- a/drivers/watchdog/Makefile
++++ b/drivers/watchdog/Makefile
+@@ -105,6 +105,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+ obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
+ obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
+ obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
++obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
+
+ # PARISC Architecture
+
+--- a/drivers/watchdog/Kconfig
++++ b/drivers/watchdog/Kconfig
+@@ -764,6 +764,16 @@ config TXX9_WDT
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
++config BCM63XX_WDT
++ tristate "Broadcom BCM63xx hardware watchdog"
++ depends on BCM63XX
++ help
++ Watchdog driver for the built in watchdog hardware in Broadcom
++ BCM63xx SoC.
++
++ To compile thi driver as a loadable module, choose M here.
++ The module will be called bcm63xx_wdt.
++
+ # PARISC Architecture
+
+ # POWERPC Architecture
--- /dev/null
+From e734ace5baa04e0e8af1d4483475fbd6bd2b32a1 Mon Sep 17 00:00:00 2001
+From: Axel Gembe <ago@bastart.eu.org>
+Date: Mon, 12 May 2008 18:54:09 +0200
+Subject: [PATCH] bcm963xx: flashmap support
+
+
+Signed-off-by: Axel Gembe <ago@bastart.eu.org>
+---
+ drivers/mtd/maps/Kconfig | 7 +++++++
+ drivers/mtd/maps/Makefile | 1 +
+ drivers/mtd/redboot.c | 13 ++++++++++---
+ 3 files changed, 18 insertions(+), 3 deletions(-)
+
+--- a/drivers/mtd/maps/Kconfig
++++ b/drivers/mtd/maps/Kconfig
+@@ -268,6 +268,13 @@ config MTD_ALCHEMY
+ help
+ Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
+
++config MTD_BCM963XX
++ tristate "BCM963xx Flash device"
++ depends on MIPS && BCM63XX
++ help
++ Flash memory access on BCM963xx boards. Currently only works with
++ RedBoot and CFE.
++
+ config MTD_DILNETPC
+ tristate "CFI Flash device mapped on DIL/Net PC"
+ depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
+--- a/drivers/mtd/redboot.c
++++ b/drivers/mtd/redboot.c
+@@ -39,7 +39,7 @@ static inline int redboot_checksum(struc
+ return 1;
+ }
+
+-static int parse_redboot_partitions(struct mtd_info *master,
++int parse_redboot_partitions(struct mtd_info *master,
+ struct mtd_partition **pparts,
+ unsigned long fis_origin)
+ {
+@@ -162,6 +162,14 @@ static int parse_redboot_partitions(stru
+ goto out;
+ }
+
++ if (!fis_origin) {
++ for (i = 0; i < numslots; i++) {
++ if (!strncmp(buf[i].name, "RedBoot", 8)) {
++ fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
++ }
++ }
++ }
++
+ for (i = 0; i < numslots; i++) {
+ struct fis_list *new_fl, **prev;
+
+@@ -184,9 +192,8 @@ static int parse_redboot_partitions(stru
+ new_fl->img = &buf[i];
+ if (fis_origin) {
+ buf[i].flash_base -= fis_origin;
+- } else {
+- buf[i].flash_base &= master->size-1;
+ }
++ buf[i].flash_base &= (master->size << 1) - 1;
+
+ /* I'm sure the JFFS2 code has done me permanent damage.
+ * I now think the following is _normal_
+--- a/drivers/mtd/maps/Makefile
++++ b/drivers/mtd/maps/Makefile
+@@ -62,3 +62,4 @@ obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_
+ obj-$(CONFIG_MTD_BFIN_ASYNC) += bfin-async-flash.o
+ obj-$(CONFIG_MTD_RBTX4939) += rbtx4939-flash.o
+ obj-$(CONFIG_MTD_VMU) += vmu-flash.o
++obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o
--- /dev/null
+--- a/drivers/spi/Kconfig
++++ b/drivers/spi/Kconfig
+@@ -229,6 +229,13 @@ config SPI_XILINX
+ See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
+ Product Specification document (DS464) for hardware details.
+
++config SPI_BCM63XX
++ tristate "Broadcom BCM63xx SPI controller"
++ depends on BCM63XX
++ select SPI_BITBANG
++ help
++ SPI driver for the Broadcom BCM63xx SPI controller.
++
+ #
+ # Add new SPI master controllers in alphabetical order above this line
+ #
+--- a/drivers/spi/Makefile
++++ b/drivers/spi/Makefile
+@@ -31,6 +31,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x
+ obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
+ obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
+ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o
++obj-$(CONFIG_SPI_BCM63XX) += bcm63xx_spi.o
+ # ... add above this line ...
+
+ # SPI protocol drivers (device/link on bus)
projects / openwrt / svn-archive / archive.git / commitdiff