ifeq ($(LINUX_VERSION),2.6.28.10)
LINUX_KERNEL_MD5SUM:=c4efb2c494d749cb5de274f8ae41c3fa
endif
-ifeq ($(LINUX_VERSION),2.6.29.2)
- LINUX_KERNEL_MD5SUM:=a6839571a9e70baf821d2fb752f9c4c6
-endif
# disable the md5sum check for unknown kernel versions
LINUX_KERNEL_MD5SUM?=x
+++ /dev/null
-# CONFIG_6PACK is not set
-# CONFIG_8139CP is not set
-# CONFIG_8139TOO is not set
-# CONFIG_9P_FS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_ACENIC is not set
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_ADAPTEC_STARFIRE is not set
-# CONFIG_ADFS_FS is not set
-# CONFIG_ADM6996_PHY is not set
-# CONFIG_ADM8211 is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_AFS_FS is not set
-CONFIG_AIO=y
-# CONFIG_AIRO_CS is not set
-# CONFIG_AIRO is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_AMD8111_ETH is not set
-# CONFIG_AMIGA_PARTITION is not set
-CONFIG_ANON_INODES=y
-# CONFIG_APPLICOM is not set
-# CONFIG_AR8216_PHY is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-CONFIG_ARCH_FLATMEM_ENABLE=y
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_GEMINI is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MMP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_S3C64XX is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_W90X900 is not set
-# CONFIG_ARCNET is not set
-CONFIG_ARPD=y
-# CONFIG_ARTHUR is not set
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_AT24 is not set
-# CONFIG_ATA_ACPI is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_ATA is not set
-# CONFIG_ATALK is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_ATA_SFF is not set
-# CONFIG_ATH5K is not set
-# CONFIG_ATH9K is not set
-# CONFIG_ATL1C is not set
-# CONFIG_ATL1E is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL2 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-CONFIG_ATM_BR2684_IPFILTER=y
-# CONFIG_ATM_BR2684 is not set
-# CONFIG_ATM_CLIP is not set
-CONFIG_ATM_CLIP_NO_ICMP=y
-# CONFIG_ATM_DRIVERS is not set
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATMEL is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_FORE200E_MAYBE is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_LANE is not set
-# CONFIG_ATM_MPOA is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_SOLOS is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_AUDIT is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AX25_DAMA_SLAVE is not set
-# CONFIG_AX25 is not set
-# CONFIG_AX88796 is not set
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_B44 is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-CONFIG_BASE_FULL=y
-# CONFIG_BASLER_EXCITE is not set
-# CONFIG_BAYCOM_EPP is not set
-# CONFIG_BAYCOM_PAR is not set
-# CONFIG_BAYCOM_SER_FDX is not set
-# CONFIG_BAYCOM_SER_HDX is not set
-CONFIG_BCM43XX_DEBUG=y
-CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
-# CONFIG_BCM43XX_DMA_MODE is not set
-CONFIG_BCM43XX_DMA=y
-# CONFIG_BCM43XX is not set
-# CONFIG_BCM43XX_PIO_MODE is not set
-CONFIG_BCM43XX_PIO=y
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_BINFMT_AOUT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-# CONFIG_BLINK is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_ATIIXP is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_CMD640 is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_CS5535 is not set
-# CONFIG_BLK_DEV_CY82C693 is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_DELKIN is not set
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_GENERIC is not set
-# CONFIG_BLK_DEV_HD_IDE is not set
-# CONFIG_BLK_DEV_HD is not set
-# CONFIG_BLK_DEV_HD_ONLY is not set
-# CONFIG_BLK_DEV_HPT34X is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_IDEACPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDECS is not set
-# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
-# CONFIG_BLK_DEV_IDEPCI is not set
-# CONFIG_BLK_DEV_IDEPNP is not set
-# CONFIG_BLK_DEV_IDE_SATA is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_BLK_DEV_INTEGRITY is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_OFFBOARD is not set
-# CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_PLATFORM is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_RZ1000 is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SIS5513 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_TC86C001 is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_VIA82CXXX is not set
-# CONFIG_BLK_DEV_XIP is not set
-CONFIG_BLK_DEV=y
-CONFIG_BLOCK=y
-# CONFIG_BNX2 is not set
-# CONFIG_BONDING is not set
-# CONFIG_BPQETHER is not set
-# CONFIG_BRIDGE_EBT_802_3 is not set
-# CONFIG_BRIDGE_EBT_AMONG is not set
-# CONFIG_BRIDGE_EBT_ARP is not set
-# CONFIG_BRIDGE_EBT_ARPREPLY is not set
-# CONFIG_BRIDGE_EBT_BROUTE is not set
-# CONFIG_BRIDGE_EBT_DNAT is not set
-# CONFIG_BRIDGE_EBT_IP6 is not set
-# CONFIG_BRIDGE_EBT_IP is not set
-# CONFIG_BRIDGE_EBT_LIMIT is not set
-# CONFIG_BRIDGE_EBT_LOG is not set
-# CONFIG_BRIDGE_EBT_MARK is not set
-# CONFIG_BRIDGE_EBT_MARK_T is not set
-# CONFIG_BRIDGE_EBT_NFLOG is not set
-# CONFIG_BRIDGE_EBT_PKTTYPE is not set
-# CONFIG_BRIDGE_EBT_REDIRECT is not set
-# CONFIG_BRIDGE_EBT_SNAT is not set
-# CONFIG_BRIDGE_EBT_STP is not set
-# CONFIG_BRIDGE_EBT_T_FILTER is not set
-# CONFIG_BRIDGE_EBT_T_NAT is not set
-# CONFIG_BRIDGE_EBT_ULOG is not set
-# CONFIG_BRIDGE_EBT_VLAN is not set
-# CONFIG_BRIDGE_NETFILTER is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
-CONFIG_BRIDGE=y
-# CONFIG_BROADCOM_PHY is not set
-CONFIG_BROKEN_ON_SMP=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BT_BNEP is not set
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-# CONFIG_BT_CMTP is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIBLUECARD is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBT3C is not set
-# CONFIG_BT_HCIBTSDIO is not set
-# CONFIG_BT_HCIBTUART is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIDTL1 is not set
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART is not set
-# CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIUSB is not set
-CONFIG_BT_HCIUSB_SCO=y
-# CONFIG_BT_HCIVHCI is not set
-# CONFIG_BT_HIDP is not set
-# CONFIG_BT is not set
-# CONFIG_BT_L2CAP is not set
-# CONFIG_BT_RFCOMM is not set
-CONFIG_BT_RFCOMM_TTY=y
-# CONFIG_BTRFS_FS is not set
-# CONFIG_BT_SCO is not set
-CONFIG_BUG=y
-# CONFIG_C2PORT is not set
-# CONFIG_CAN is not set
-# CONFIG_CAPI_AVM is not set
-# CONFIG_CAPI_EICON is not set
-# CONFIG_CAPI_TRACE is not set
-CONFIG_CARDBUS=y
-# CONFIG_CARDMAN_4000 is not set
-# CONFIG_CARDMAN_4040 is not set
-# CONFIG_CASSINI is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_CFG80211=m
-# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_CGROUPS is not set
-# CONFIG_CHELSIO_T1 is not set
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_CHR_DEV_SCH is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_CIFS_DEBUG2 is not set
-# CONFIG_CIFS_EXPERIMENTAL is not set
-# CONFIG_CIFS is not set
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_STATS2 is not set
-CONFIG_CIFS_STATS=y
-# CONFIG_CIFS_WEAK_PW_HASH is not set
-# CONFIG_CIFS_XATTR is not set
-CONFIG_CLASSIC_RCU=y
-CONFIG_CLS_U32_MARK=y
-CONFIG_CLS_U32_PERF=y
-CONFIG_CMDLINE=""
-# CONFIG_CODA_FS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_CONFIGFS_FS is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_IDLE is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC_ITU_T is not set
-# CONFIG_CRC_T10DIF is not set
-CONFIG_CROSSCOMPILE=y
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_AEAD=m
-# CONFIG_CRYPTO_AES_586 is not set
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ALGAPI2=m
-CONFIG_CRYPTO_ALGAPI=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-CONFIG_CRYPTO_ARC4=m
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_BLKCIPHER2=m
-CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRC32C_INTEL is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_HASH2=m
-CONFIG_CRYPTO_HASH=m
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_HW is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_LZO is not set
-CONFIG_CRYPTO_MANAGER2=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_PRNG is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_RNG=m
-# CONFIG_CRYPTO_SALSA20_586 is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SEQIV is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_TWOFISH_586 is not set
-# CONFIG_CRYPTO_TWOFISH_COMMON is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO=y
-# CONFIG_DAB is not set
-# CONFIG_DAVICOM_PHY is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DECNET is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_BIC is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_CUBIC is not set
-CONFIG_DEFAULT_DEADLINE=y
-# CONFIG_DEFAULT_HTCP is not set
-CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_DEFAULT_NOOP is not set
-# CONFIG_DEFAULT_RENO is not set
-CONFIG_DEFAULT_TCP_CONG="westwood"
-# CONFIG_DEFAULT_VEGAS is not set
-CONFIG_DEFAULT_WESTWOOD=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-# CONFIG_DEVKMEM is not set
-# CONFIG_DGRS is not set
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_DL2K is not set
-# CONFIG_DLM is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_DMA_ENGINE is not set
-# CONFIG_DMASCC is not set
-# CONFIG_DMATEST is not set
-# CONFIG_DNET is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_DRM is not set
-# CONFIG_DS1682 is not set
-# CONFIG_DTLK is not set
-# CONFIG_DUMMY is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DVB is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_E1000E is not set
-# CONFIG_E1000 is not set
-# CONFIG_E100 is not set
-# CONFIG_ECONET is not set
-# CONFIG_EEPRO100 is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_ELF_CORE is not set
-CONFIG_EMBEDDED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENC28J60 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_EPIC100 is not set
-CONFIG_EPOLL=y
-# CONFIG_EQUALIZER is not set
-CONFIG_EVENTFD=y
-CONFIG_EXPERIMENTAL=y
-# CONFIG_EXPORTFS is not set
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_EXTRA_FIRMWARE=""
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_FAIR_GROUP_SCHED is not set
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_FAT_FS is not set
-# CONFIG_FB_IBM_GXT4500 is not set
-# CONFIG_FB is not set
-# CONFIG_FCOE is not set
-# CONFIG_FDDI is not set
-# CONFIG_FEALNX is not set
-CONFIG_FIB_RULES=y
-CONFIG_FILE_LOCKING=y
-# CONFIG_FIREWIRE is not set
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-# CONFIG_FIXED_PHY is not set
-CONFIG_FLATMEM_MANUAL=y
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_FORCEDETH is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_FREEZER is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_FTL is not set
-# CONFIG_FTRACE is not set
-# CONFIG_FUSE_FS is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SAS is not set
-# CONFIG_FUSION_SPI is not set
-CONFIG_FUTEX=y
-CONFIG_FW_LOADER=y
-CONFIG_GACT_PROB=y
-# CONFIG_GAMEPORT is not set
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
-# CONFIG_GFS2_FS is not set
-# CONFIG_GPIO_BT8XX is not set
-# CONFIG_GPIO_DEVICE is not set
-# CONFIG_GPIOLIB is not set
-# CONFIG_GPIO_MAX7301 is not set
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_GPIO_PCA953X is not set
-# CONFIG_GPIO_PCF857X is not set
-# CONFIG_GPIO_SYSFS is not set
-# CONFIG_GPIO_XILINX is not set
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_HAMACHI is not set
-CONFIG_HAMRADIO=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_HDLC_CISCO is not set
-# CONFIG_HDLC_FR is not set
-# CONFIG_HDLC is not set
-# CONFIG_HDLC_PPP is not set
-# CONFIG_HDLC_RAW_ETH is not set
-# CONFIG_HDLC_RAW is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_HERMES is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_HID_A4TECH is not set
-# CONFIG_HID_APPLE is not set
-# CONFIG_HID_BELKIN is not set
-# CONFIG_HID_BRIGHT is not set
-# CONFIG_HID_CHERRY is not set
-# CONFIG_HID_CHICONY is not set
-# CONFIG_HID_COMPAT is not set
-# CONFIG_HID_CYPRESS is not set
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HID_DELL is not set
-# CONFIG_HID_EZKEY is not set
-# CONFIG_HID_FF is not set
-# CONFIG_HID_GYRATION is not set
-# CONFIG_HID is not set
-# CONFIG_HID_LOGITECH is not set
-# CONFIG_HID_MICROSOFT is not set
-# CONFIG_HID_MONTEREY is not set
-# CONFIG_HID_PANTHERLORD is not set
-# CONFIG_HID_PETALYNX is not set
-# CONFIG_HID_PID is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
-# CONFIG_HID_SUNPLUS is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_HIGH_RES_TIMERS=y
-# CONFIG_HIPPI is not set
-# CONFIG_HOSTAP_CS is not set
-# CONFIG_HOSTAP_FIRMWARE is not set
-# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
-# CONFIG_HOSTAP is not set
-# CONFIG_HOSTAP_PCI is not set
-# CONFIG_HOSTAP_PLX is not set
-# CONFIG_HOTPLUG_CPU is not set
-# CONFIG_HOTPLUG_PCI is not set
-CONFIG_HOTPLUG=y
-# CONFIG_HP100 is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-CONFIG_HZ=100
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ_100=y
-# CONFIG_HZ_1024 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_48 is not set
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCA is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_CHARDEV is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_ELEKTOR is not set
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_HELPER_AUTO is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
-# CONFIG_I2C_IBM_IIC is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_MPC is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PCA_ISA is not set
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-# CONFIG_I2C_VOODOO3 is not set
-# CONFIG_I2O is not set
-# CONFIG_I82092 is not set
-# CONFIG_I82365 is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDMA_IVB is not set
-# CONFIG_IDEDMA_ONLYDISK is not set
-# CONFIG_IDE_GD is not set
-# CONFIG_IDE is not set
-CONFIG_IDE_MAX_HWIFS=4
-# CONFIG_IDEPCI_SHARE_IRQ is not set
-CONFIG_IDE_PROC_FS=y
-# CONFIG_IDE_TASK_IOCTL is not set
-# CONFIG_IEEE1394_DV1394 is not set
-# CONFIG_IEEE1394_ETH1394 is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_IEEE1394_OHCI1394 is not set
-# CONFIG_IEEE1394_PCILYNX is not set
-# CONFIG_IEEE1394_RAWIO is not set
-# CONFIG_IEEE1394_VERBOSEDEBUG is not set
-# CONFIG_IEEE1394_VIDEO1394 is not set
-# CONFIG_IEEE80211_CRYPT_CCMP is not set
-# CONFIG_IEEE80211_CRYPT_TKIP is not set
-# CONFIG_IEEE80211_CRYPT_WEP is not set
-# CONFIG_IEEE80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
-# CONFIG_IEEE80211_SOFTMAC is not set
-# CONFIG_IFB is not set
-# CONFIG_IGB is not set
-# CONFIG_IKCONFIG is not set
-# CONFIG_IKCONFIG_PROC is not set
-# CONFIG_IMQ_BEHAVIOR_AA is not set
-# CONFIG_IMQ_BEHAVIOR_AB is not set
-# CONFIG_IMQ_BEHAVIOR_BA is not set
-# CONFIG_IMQ_BEHAVIOR_BB is not set
-# CONFIG_IMQ is not set
-CONFIG_IMQ_NUM_DEVS=2
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_TCP_DIAG is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET=y
-# CONFIG_INFINIBAND is not set
-# CONFIG_INFTL is not set
-CONFIG_INIT_ENV_ARG_LIMIT=32
-# CONFIG_INOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-# CONFIG_INPUT_APANEL is not set
-# CONFIG_INPUT_ATI_REMOTE2 is not set
-# CONFIG_INPUT_ATI_REMOTE is not set
-# CONFIG_INPUT_ATLAS_BTNS is not set
-# CONFIG_INPUT_CM109 is not set
-# CONFIG_INPUT_EVBUG is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_KEYSPAN_REMOTE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_POLLDEV is not set
-# CONFIG_INPUT_POWERMATE is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_UINPUT is not set
-# CONFIG_INPUT_WISTRON_BTNS is not set
-# CONFIG_INPUT_YEALINK is not set
-# CONFIG_INSTRUMENTATION is not set
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IP1000 is not set
-# CONFIG_IP175C_PHY is not set
-# CONFIG_IP6_NF_FILTER is not set
-# CONFIG_IP6_NF_IPTABLES is not set
-# CONFIG_IP6_NF_MANGLE is not set
-# CONFIG_IP6_NF_MATCH_AH is not set
-# CONFIG_IP6_NF_MATCH_EUI64 is not set
-# CONFIG_IP6_NF_MATCH_FRAG is not set
-# CONFIG_IP6_NF_MATCH_HL is not set
-# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
-# CONFIG_IP6_NF_MATCH_LIMIT is not set
-# CONFIG_IP6_NF_MATCH_MH is not set
-# CONFIG_IP6_NF_MATCH_OPTS is not set
-# CONFIG_IP6_NF_MATCH_OWNER is not set
-# CONFIG_IP6_NF_MATCH_RT is not set
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_RAW is not set
-# CONFIG_IP6_NF_TARGET_HL is not set
-# CONFIG_IP6_NF_TARGET_IMQ is not set
-# CONFIG_IP6_NF_TARGET_LOG is not set
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-# CONFIG_IP6_NF_TARGET_ROUTE is not set
-CONFIG_IP_ADVANCED_ROUTER=y
-# CONFIG_IPC_NS is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_IP_MROUTE is not set
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_MULTIPLE_TABLES=y
-# CONFIG_IP_NF_AMANDA is not set
-# CONFIG_IP_NF_ARPFILTER is not set
-# CONFIG_IP_NF_ARP_MANGLE is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CONNTRACK=y
-CONFIG_IP_NF_CT_ACCT=y
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-# CONFIG_IP_NF_FILTER is not set
-# CONFIG_IP_NF_FTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_IRC is not set
-# CONFIG_IP_NF_MANGLE is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_AH is not set
-# CONFIG_IP_NF_MATCH_ECN is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-# CONFIG_IP_NF_MATCH_IPP2P is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
-# CONFIG_IP_NF_MATCH_SET is not set
-# CONFIG_IP_NF_MATCH_TIME is not set
-# CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_NAT_AMANDA is not set
-# CONFIG_IP_NF_NAT_FTP is not set
-# CONFIG_IP_NF_NAT_H323 is not set
-# CONFIG_IP_NF_NAT_IRC is not set
-CONFIG_IP_NF_NAT_NEEDED=y
-# CONFIG_IP_NF_NAT_PPTP is not set
-# CONFIG_IP_NF_NAT_SIP is not set
-# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
-# CONFIG_IP_NF_NAT_TFTP is not set
-CONFIG_IP_NF_NAT=y
-# CONFIG_IP_NF_NETBIOS_NS is not set
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_SET_HASHSIZE=1024
-# CONFIG_IP_NF_SET_IPHASH is not set
-# CONFIG_IP_NF_SET_IPMAP is not set
-# CONFIG_IP_NF_SET_IPPORTHASH is not set
-# CONFIG_IP_NF_SET_IPTREE is not set
-# CONFIG_IP_NF_SET_IPTREEMAP is not set
-# CONFIG_IP_NF_SET is not set
-# CONFIG_IP_NF_SET_MACIPMAP is not set
-CONFIG_IP_NF_SET_MAX=256
-# CONFIG_IP_NF_SET_NETHASH is not set
-# CONFIG_IP_NF_SET_PORTMAP is not set
-# CONFIG_IP_NF_SIP is not set
-# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
-# CONFIG_IP_NF_TARGET_ECN is not set
-# CONFIG_IP_NF_TARGET_IMQ is not set
-# CONFIG_IP_NF_TARGET_LOG is not set
-# CONFIG_IP_NF_TARGET_MASQUERADE is not set
-# CONFIG_IP_NF_TARGET_NETMAP is not set
-# CONFIG_IP_NF_TARGET_REDIRECT is not set
-# CONFIG_IP_NF_TARGET_REJECT is not set
-# CONFIG_IP_NF_TARGET_ROUTE is not set
-# CONFIG_IP_NF_TARGET_SAME is not set
-# CONFIG_IP_NF_TARGET_SET is not set
-# CONFIG_IP_NF_TARGET_TOS is not set
-# CONFIG_IP_NF_TARGET_TTL is not set
-# CONFIG_IP_NF_TARGET_ULOG is not set
-# CONFIG_IP_NF_TFTP is not set
-# CONFIG_IP_PNP is not set
-CONFIG_IP_ROUTE_FWMARK=y
-CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
-# CONFIG_IP_ROUTE_MULTIPATH_DRR is not set
-# CONFIG_IP_ROUTE_MULTIPATH_RANDOM is not set
-# CONFIG_IP_ROUTE_MULTIPATH_RR is not set
-# CONFIG_IP_ROUTE_MULTIPATH_WRANDOM is not set
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-# CONFIG_IP_SCTP is not set
-CONFIG_IPSEC_NAT_TRAVERSAL=y
-# CONFIG_IPV6 is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTE_INFO is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_SIT is not set
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IP_VS is not set
-# CONFIG_IPW2100_DEBUG is not set
-# CONFIG_IPW2100 is not set
-CONFIG_IPW2100_MONITOR=y
-# CONFIG_IPW2200_DEBUG is not set
-# CONFIG_IPW2200 is not set
-CONFIG_IPW2200_MONITOR=y
-# CONFIG_IPW2200_PROMISCUOUS is not set
-# CONFIG_IPW2200_QOS is not set
-# CONFIG_IPW2200_RADIOTAP is not set
-# CONFIG_IPWIRELESS is not set
-# CONFIG_IPX is not set
-# CONFIG_IRDA is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_ISDN_CAPI_CAPI20 is not set
-CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
-# CONFIG_ISDN_CAPI_CAPIFS is not set
-# CONFIG_ISDN_CAPI is not set
-CONFIG_ISDN_CAPI_MIDDLEWARE=y
-# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
-# CONFIG_ISDN_I4L is not set
-CONFIG_ISDN=y
-# CONFIG_ISO9660_FS is not set
-# CONFIG_IWL3945 is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IXGB is not set
-# CONFIG_JBD2_DEBUG is not set
-# CONFIG_JBD_DEBUG is not set
-# CONFIG_JBD is not set
-# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
-# CONFIG_JFFS2_CMODE_NONE is not set
-CONFIG_JFFS2_CMODE_PRIORITY=y
-# CONFIG_JFFS2_CMODE_SIZE is not set
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_XATTR is not set
-CONFIG_JFFS2_FS=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS_FS is not set
-# CONFIG_JFS_DEBUG is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_JFS_POSIX_ACL is not set
-# CONFIG_JFS_SECURITY is not set
-# CONFIG_JFS_STATISTICS is not set
-# CONFIG_JME is not set
-CONFIG_JOLIET=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_KEXEC is not set
-# CONFIG_KEYS is not set
-CONFIG_KMOD=y
-# CONFIG_KPROBES is not set
-# CONFIG_LANMEDIA is not set
-# CONFIG_LAPB is not set
-# CONFIG_LASAT is not set
-# CONFIG_LATENCYTOP is not set
-# CONFIG_LBD is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_LEDS_ALIX is not set
-CONFIG_LEDS_CLASS=y
-# CONFIG_LEDS_PCA9532 is not set
-# CONFIG_LEDS_PCA955X is not set
-# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
-# CONFIG_LEDS_TRIGGER_MORSE is not set
-CONFIG_LEDS_TRIGGER_NETDEV=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_LIB80211_DEBUG is not set
-# CONFIG_LIBCRC32C is not set
-# CONFIG_LIBERTAS is not set
-# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_LIBERTAS_USB is not set
-# CONFIG_LIBFC is not set
-# CONFIG_LIBIPW_DEBUG is not set
-# CONFIG_LLC2 is not set
-CONFIG_LLC=y
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_LOCKDEP_SUPPORT=y
-# CONFIG_LOCKD is not set
-CONFIG_LOCKD_V4=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LSF is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MAC80211_LEDS is not set
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_MESH is not set
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC_EMUMOUSEBTN is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_MARKERS is not set
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MD is not set
-# CONFIG_MEDIA_ATTACH is not set
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MIGRATION is not set
-CONFIG_MII=y
-CONFIG_MINI_FO=y
-# CONFIG_MINIX_FS is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_MISDN_HFCPCI is not set
-# CONFIG_MISDN_HFCUSB is not set
-# CONFIG_MISDN is not set
-# CONFIG_MKISS is not set
-# CONFIG_MMC_ARMMMCI is not set
-# CONFIG_MMC is not set
-# CONFIG_MMC_SDRICOH_CS is not set
-# CONFIG_MMC_TEST is not set
-CONFIG_MMU=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MSDOS_FS is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_ALAUDA is not set
-# CONFIG_MTD_AR7_PARTS is not set
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-CONFIG_MTD_BLKDEVS=y
-# CONFIG_MTD_BLOCK2MTD is not set
-CONFIG_MTD_BLOCK=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DATAFLASH is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_INTEL_VR_NOR is not set
-# CONFIG_MTD_JEDECPROBE is not set
-# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_M25P80 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_MYLOADER_PARTS is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_ONENAND is not set
-# CONFIG_MTD_OOPS is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PCI is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PHYSMAP is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_ROM is not set
-CONFIG_MTD_ROOTFS_ROOT_DEV=y
-CONFIG_MTD_ROOTFS_SPLIT=y
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_TESTS is not set
-# CONFIG_MTD_UBI is not set
-CONFIG_MTD=y
-# CONFIG_MVSWITCH_PHY is not set
-# CONFIG_MWAVE is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NET_9P is not set
-# CONFIG_NET_ACT_GACT is not set
-# CONFIG_NET_ACT_IPT is not set
-# CONFIG_NET_ACT_MIRRED is not set
-# CONFIG_NET_ACT_NAT is not set
-# CONFIG_NET_ACT_PEDIT is not set
-CONFIG_NET_ACT_POLICE=y
-# CONFIG_NET_ACT_SIMP is not set
-# CONFIG_NET_ACT_SKBEDIT is not set
-CONFIG_NET_CLS_ACT=y
-# CONFIG_NET_CLS_BASIC is not set
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_CLS_FW is not set
-CONFIG_NET_CLS_IND=y
-CONFIG_NET_CLS_POLICE=y
-# CONFIG_NET_CLS_ROUTE4 is not set
-CONFIG_NET_CLS_ROUTE=y
-# CONFIG_NET_CLS_RSVP6 is not set
-# CONFIG_NET_CLS_RSVP is not set
-# CONFIG_NET_CLS_TCINDEX is not set
-# CONFIG_NET_CLS_U32 is not set
-CONFIG_NET_CLS=y
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETDEBUG is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEVICES_MULTIQUEUE=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_DSA is not set
-# CONFIG_NET_EMATCH_CMP is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_EMATCH_META is not set
-# CONFIG_NET_EMATCH_NBYTE is not set
-CONFIG_NET_EMATCH_STACK=32
-# CONFIG_NET_EMATCH_TEXT is not set
-# CONFIG_NET_EMATCH_U32 is not set
-CONFIG_NET_ESTIMATOR=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NET_FC is not set
-CONFIG_NETFILTER_ADVANCED=y
-# CONFIG_NETFILTER_DEBUG is not set
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_TPROXY is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
-# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG is not set
-# CONFIG_NETFILTER_XT_MATCH_LAYER7 is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_IMQ is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-CONFIG_NETFILTER=y
-CONFIG_NET_IPGRE_BROADCAST=y
-# CONFIG_NET_IPGRE is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_ISA is not set
-# CONFIG_NET_KEY is not set
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_NET_PCI=y
-# CONFIG_NET_PCMCIA is not set
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_NETPOLL is not set
-CONFIG_NET_RADIO=y
-# CONFIG_NETROM is not set
-# CONFIG_NET_SB1000 is not set
-# CONFIG_NET_SCH_ATM is not set
-# CONFIG_NET_SCH_CBQ is not set
-# CONFIG_NET_SCH_CLK_CPU is not set
-# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
-CONFIG_NET_SCH_CLK_JIFFIES=y
-# CONFIG_NET_SCH_DSMARK is not set
-CONFIG_NET_SCHED=y
-# CONFIG_NET_SCH_ESFQ is not set
-CONFIG_NET_SCH_ESFQ_NFCT=y
-CONFIG_NET_SCH_FIFO=y
-# CONFIG_NET_SCH_GRED is not set
-# CONFIG_NET_SCH_HFSC is not set
-# CONFIG_NET_SCH_HTB is not set
-# CONFIG_NET_SCH_INGRESS is not set
-# CONFIG_NET_SCH_MULTIQ is not set
-# CONFIG_NET_SCH_NETEM is not set
-# CONFIG_NET_SCH_PRIO is not set
-# CONFIG_NET_SCH_RED is not set
-# CONFIG_NET_SCH_RR is not set
-# CONFIG_NET_SCH_SFQ is not set
-# CONFIG_NET_SCH_TBF is not set
-# CONFIG_NET_SCH_TEQL is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NET_WIRELESS_RTNETLINK=y
-CONFIG_NET_WIRELESS=y
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETXEN_NIC is not set
-CONFIG_NET=y
-# CONFIG_NEW_GPIO is not set
-CONFIG_NEW_LEDS=y
-# CONFIG_NF_CONNTRACK_AMANDA is not set
-CONFIG_NF_CONNTRACK_ENABLED=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CONNTRACK_FTP is not set
-# CONFIG_NF_CONNTRACK_H323 is not set
-# CONFIG_NF_CONNTRACK_IPV4 is not set
-# CONFIG_NF_CONNTRACK_IPV6 is not set
-# CONFIG_NF_CONNTRACK_IRC is not set
-# CONFIG_NF_CONNTRACK is not set
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_NF_CONNTRACK_RTSP is not set
-# CONFIG_NF_CONNTRACK_SANE is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
-CONFIG_NF_CONNTRACK_SUPPORT=y
-# CONFIG_NF_CONNTRACK_TFTP is not set
-# CONFIG_NF_CT_ACCT is not set
-# CONFIG_NF_CT_NETLINK is not set
-# CONFIG_NF_CT_PROTO_DCCP is not set
-# CONFIG_NF_CT_PROTO_GRE is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_FTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_IRC is not set
-# CONFIG_NF_NAT is not set
-CONFIG_NF_NAT_NEEDED=y
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_PROTO_GRE is not set
-# CONFIG_NF_NAT_RTSP is not set
-# CONFIG_NF_NAT_SIP is not set
-# CONFIG_NF_NAT_SNMP_BASIC is not set
-# CONFIG_NF_NAT_TFTP is not set
-# CONFIG_NFS_ACL_SUPPORT is not set
-CONFIG_NFS_COMMON=y
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_NFSD_TCP=y
-# CONFIG_NFSD_V2_ACL is not set
-# CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V4=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-# CONFIG_NFTL is not set
-CONFIG_NL80211=y
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_NORTEL_HERMES is not set
-# CONFIG_NOZOMI is not set
-# CONFIG_NS83820 is not set
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_FS is not set
-# CONFIG_NTFS_RW is not set
-# CONFIG_OCF_BENCH is not set
-# CONFIG_OCF_EP80579 is not set
-# CONFIG_OCF_HIFNHIPP is not set
-# CONFIG_OCF_HIFN is not set
-# CONFIG_OCF_IXP4XX is not set
-# CONFIG_OCF_OCF is not set
-# CONFIG_OCF_OCFNULL is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_OCF_SAFE is not set
-# CONFIG_OCF_TALITOS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_P54_COMMON is not set
-CONFIG_PACKET_MMAP=y
-CONFIG_PACKET=y
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PANTHERLORD_FF is not set
-# CONFIG_PARPORT is not set
-# CONFIG_PARPORT_PC is not set
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CS5535 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_ISAPNP is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_LEGACY is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_PCMCIA is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_QDI is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_WINBOND_VLB is not set
-# CONFIG_PC300TOO is not set
-# CONFIG_PCCARD is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_PCI200SYN is not set
-# CONFIG_PCI_ATMEL is not set
-# CONFIG_PCI_HERMES is not set
-# CONFIG_PCI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCIPCWATCHDOG is not set
-CONFIG_PCI_QUIRKS=y
-# CONFIG_PCMCIA_AHA152X is not set
-# CONFIG_PCMCIA_ATMEL is not set
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA_FDOMAIN is not set
-# CONFIG_PCMCIA_HERMES is not set
-# CONFIG_PCMCIA_IOCTL is not set
-# CONFIG_PCMCIA is not set
-# CONFIG_PCMCIA_LOAD_CIS is not set
-# CONFIG_PCMCIA_NETWAVE is not set
-# CONFIG_PCMCIA_NINJA_SCSI is not set
-# CONFIG_PCMCIA_QLOGIC is not set
-# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_PCMCIA_SPECTRUM is not set
-# CONFIG_PCMCIA_SYM53C500 is not set
-# CONFIG_PCMCIA_WAVELAN is not set
-# CONFIG_PCMCIA_WL3501 is not set
-# CONFIG_PCNET32 is not set
-# CONFIG_PD6729 is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_PHANTOM is not set
-# CONFIG_PHONE is not set
-# CONFIG_PHONET is not set
-# CONFIG_PHYLIB is not set
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-# CONFIG_PID_NS is not set
-CONFIG_PLIST=y
-# CONFIG_PLX_HERMES is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_PM is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_PPC4xx_GPIO=y
-# CONFIG_PPP_ASYNC is not set
-# CONFIG_PPP_BSDCOMP is not set
-# CONFIG_PPP_DEFLATE is not set
-CONFIG_PPP_FILTER=y
-# CONFIG_PPP is not set
-# CONFIG_PPP_MPPE is not set
-CONFIG_PPP_MULTILINK=y
-# CONFIG_PPPOATM is not set
-# CONFIG_PPPOE is not set
-# CONFIG_PPPOL2TP is not set
-# CONFIG_PPP_SYNC_TTY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_PRINTK=y
-# CONFIG_PRISM54 is not set
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_PROC_SYSCTL=y
-# CONFIG_PROFILING is not set
-# CONFIG_QEMU is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_R3964 is not set
-# CONFIG_R6040 is not set
-# CONFIG_R8169 is not set
-# CONFIG_RADIO_ADAPTERS is not set
-# CONFIG_RADIO_AZTECH is not set
-# CONFIG_RADIO_CADET is not set
-# CONFIG_RADIO_GEMTEK is not set
-# CONFIG_RADIO_GEMTEK_PCI is not set
-# CONFIG_RADIO_MAESTRO is not set
-# CONFIG_RADIO_MAXIRADIO is not set
-# CONFIG_RADIO_RTRACK2 is not set
-# CONFIG_RADIO_RTRACK is not set
-# CONFIG_RADIO_SF16FMI is not set
-# CONFIG_RADIO_SF16FMR2 is not set
-# CONFIG_RADIO_TERRATEC is not set
-# CONFIG_RADIO_TRUST is not set
-# CONFIG_RADIO_TYPHOON is not set
-# CONFIG_RADIO_ZOLTRIX is not set
-# CONFIG_RAID_ATTRS is not set
-CONFIG_RAMFS=y
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_REISERFS_FS_XATTR is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-# CONFIG_RELAY is not set
-# CONFIG_RESOURCES_64BIT is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_RFKILL_INPUT is not set
-# CONFIG_RFKILL is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_ROSE is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_RT2X00 is not set
-# CONFIG_RTC_CLASS is not set
-# CONFIG_RTC_DEBUG is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1305 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1390 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_DS3234 is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_M41T94 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_MAX6902 is not set
-# CONFIG_RTC_DRV_PCF50606 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_R9701 is not set
-# CONFIG_RTC_DRV_RS5C348 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_RTC7301 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-CONFIG_RTC_HCTOSYS=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-CONFIG_RTC_INTF_DEV=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_LIB=y
-# CONFIG_RTL8180 is not set
-# CONFIG_RTL8187 is not set
-CONFIG_RT_MUTEXES=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
-# CONFIG_S2IO is not set
-# CONFIG_SAMPLES is not set
-# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_SATA_PMP is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SC92031 is not set
-# CONFIG_SCC is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_ESP_CORE is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_GENERIC_NCR5380 is not set
-# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_IN2000 is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_LPFC is not set
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_NCR53C406A is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_PAS16 is not set
-CONFIG_SCSI_PROC_FS=y
-# CONFIG_SCSI_PSI240I is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-# CONFIG_SCSI_SEAGATE is not set
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C416 is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_U14_34F is not set
-# CONFIG_SCSI_ULTRASTOR is not set
-CONFIG_SCSI_WAIT_SCAN=m
-# CONFIG_SECCOMP is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_SENSORS_ABITUGURU3 is not set
-# CONFIG_SENSORS_ABITUGURU is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_APPLESMC is not set
-# CONFIG_SENSORS_ASB100 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_CORETEMP is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_EEPROM is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCHMD is not set
-# CONFIG_SENSORS_FSCPOS is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_HDAPS is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_K8TEMP is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_M41T00 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=2
-# CONFIG_SERIAL_8250_PCI is not set
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_SERIAL_UARTLITE is not set
-# CONFIG_SERIO is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_SHAPER is not set
-CONFIG_SHMEM=y
-CONFIG_SIGNALFD=y
-# CONFIG_SIS190 is not set
-# CONFIG_SIS900 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_SKY2 is not set
-CONFIG_SLABINFO=y
-CONFIG_SLAB=y
-# CONFIG_SLHC is not set
-# CONFIG_SLIP is not set
-# CONFIG_SLOB is not set
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_SLUB is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_SMB_NLS_DEFAULT is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMC91X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_SMSC9420 is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-# CONFIG_SND_AD1816A is not set
-# CONFIG_SND_AD1848 is not set
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ADLIB is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ALS100 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT2320 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMI8330 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_CS4231 is not set
-# CONFIG_SND_CS4232 is not set
-# CONFIG_SND_CS4236 is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_CS5535AUDIO is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DT019X is not set
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1688 is not set
-# CONFIG_SND_ES18XX is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_ES968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_GUSCLASSIC is not set
-# CONFIG_SND_GUSEXTREME is not set
-# CONFIG_SND_GUSMAX is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_HWDEP is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INTEL8X0 is not set
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_INTERWAVE is not set
-# CONFIG_SND_INTERWAVE_STB is not set
-# CONFIG_SND_ISA is not set
-# CONFIG_SND is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_MIPS is not set
-# CONFIG_SND_MIRO is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_OPL3SA2 is not set
-# CONFIG_SND_OPTI92X_AD1848 is not set
-# CONFIG_SND_OPTI92X_CS4231 is not set
-# CONFIG_SND_OPTI93X is not set
-CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_PCI is not set
-# CONFIG_SND_PCMCIA is not set
-# CONFIG_SND_PCM is not set
-# CONFIG_SND_PCM_OSS is not set
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_PDAUDIOCF is not set
-# CONFIG_SND_RAWMIDI is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RTCTIMER is not set
-# CONFIG_SND_SB16 is not set
-# CONFIG_SND_SB8 is not set
-# CONFIG_SND_SBAWE is not set
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_SGALAXY is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_SSCAPE is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_TIMER is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_USB_US122L is not set
-# CONFIG_SND_USB_USX2Y is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_VXPOCKET is not set
-# CONFIG_SND_WAVEFRONT is not set
-# CONFIG_SND_YMFPCI is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_SOUND is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-# CONFIG_SPI_AT25 is not set
-# CONFIG_SPI_DEBUG is not set
-# CONFIG_SPI_GPIO_OLD is not set
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_SQUASHFS_EMBEDDED is not set
-CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
-# CONFIG_SQUASHFS_VMALLOC is not set
-CONFIG_SQUASHFS=y
-# CONFIG_SSB_DEBUG is not set
-# CONFIG_SSB is not set
-# CONFIG_SSB_PCMCIAHOST is not set
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB_SILENT is not set
-# CONFIG_SSFDC is not set
-CONFIG_STACKTRACE_SUPPORT=y
-# CONFIG_STAGING is not set
-CONFIG_STANDALONE=y
-# CONFIG_STE10XP is not set
-CONFIG_STP=y
-# CONFIG_STRIP is not set
-# CONFIG_SUNDANCE is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_SUNRPC_GSS is not set
-# CONFIG_SUNRPC is not set
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-CONFIG_SWAP=y
-# CONFIG_SWCONFIG is not set
-# CONFIG_SYNCLINK_CS is not set
-CONFIG_SYN_COOKIES=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL=y
-# CONFIG_SYSFS_DEPRECATED is not set
-# CONFIG_SYSFS_DEPRECATED_V2 is not set
-CONFIG_SYSFS=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_SYSV_FS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYSVIPC=y
-# CONFIG_TASKSTATS is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_TCIC is not set
-CONFIG_TCP_CONG_ADVANCED=y
-# CONFIG_TCP_CONG_BIC is not set
-# CONFIG_TCP_CONG_CUBIC is not set
-# CONFIG_TCP_CONG_HSTCP is not set
-# CONFIG_TCP_CONG_HTCP is not set
-# CONFIG_TCP_CONG_HYBLA is not set
-# CONFIG_TCP_CONG_ILLINOIS is not set
-# CONFIG_TCP_CONG_LP is not set
-# CONFIG_TCP_CONG_SCALABLE is not set
-# CONFIG_TCP_CONG_VEGAS is not set
-# CONFIG_TCP_CONG_VENO is not set
-CONFIG_TCP_CONG_WESTWOOD=y
-# CONFIG_TCP_CONG_YEAH is not set
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_TEXTSEARCH_BM is not set
-# CONFIG_TEXTSEARCH_FSM is not set
-# CONFIG_TEXTSEARCH_KMP is not set
-CONFIG_TEXTSEARCH=y
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_TIGON3 is not set
-CONFIG_TIMERFD=y
-# CONFIG_TINY_SHMEM is not set
-# CONFIG_TIPC is not set
-# CONFIG_TLAN is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_TMPFS_POSIX_ACL is not set
-CONFIG_TMPFS=y
-# CONFIG_TPS65010 is not set
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_TR is not set
-# CONFIG_TUNER_3036 is not set
-# CONFIG_TUNER_TEA5761 is not set
-# CONFIG_TUN is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_UDF_FS is not set
-CONFIG_UDF_NLS=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_UFS_FS is not set
-# CONFIG_UIO is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_UNEVICTABLE_LRU is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_UNIXWARE_DISKLABEL is not set
-CONFIG_UNIX=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AIPTEK is not set
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_APPLETOUCH is not set
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARMLINUX=y
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATM is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_BANDWIDTH is not set
-CONFIG_USB_BELKIN=y
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_CXACRU is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_DABUSB is not set
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_DYNAMIC_MINORS is not set
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EPSON2888 is not set
-# CONFIG_USB_ET61X251 is not set
-CONFIG_USB_EZUSB=y
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_USB_GSPCA is not set
-# CONFIG_USB_HIDDEV is not set
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-CONFIG_USB_HIDINPUT=y
-# CONFIG_USB_HID is not set
-# CONFIG_USB_HSO is not set
-# CONFIG_USB_HWA_HCD is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_KC2190 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LIBUSUAL is not set
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_CDCETHER is not set
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_DM9601 is not set
-# CONFIG_USB_NET_GL620A is not set
-# CONFIG_USB_NET_MCS7830 is not set
-# CONFIG_USB_NET_NET1080 is not set
-# CONFIG_USB_NET_PLUSB is not set
-# CONFIG_USB_NET_RNDIS_HOST is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-# CONFIG_USB_NET_SMSC95XX is not set
-# CONFIG_USB_NET_ZAURUS is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
-# CONFIG_USB_OHCI_HCD is not set
-# CONFIG_USB_OHCI_HCD_SSB is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_S2255 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ARK3116 is not set
-# CONFIG_USB_SERIAL_BELKIN is not set
-# CONFIG_USB_SERIAL_CH341 is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
-# CONFIG_USB_SERIAL_CYBERJACK is not set
-# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
-# CONFIG_USB_SERIAL_DEBUG is not set
-# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT is not set
-# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
-# CONFIG_USB_SERIAL_EMPEG is not set
-# CONFIG_USB_SERIAL_FTDI_SIO is not set
-# CONFIG_USB_SERIAL_FUNSOFT is not set
-# CONFIG_USB_SERIAL_GARMIN is not set
-CONFIG_USB_SERIAL_GENERIC=y
-# CONFIG_USB_SERIAL_HP4X is not set
-# CONFIG_USB_SERIAL_IPAQ is not set
-# CONFIG_USB_SERIAL_IPW is not set
-# CONFIG_USB_SERIAL_IR is not set
-# CONFIG_USB_SERIAL is not set
-# CONFIG_USB_SERIAL_IUU is not set
-# CONFIG_USB_SERIAL_KEYSPAN is not set
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-# CONFIG_USB_SERIAL_KLSI is not set
-# CONFIG_USB_SERIAL_KOBIL_SCT is not set
-# CONFIG_USB_SERIAL_MCT_U232 is not set
-# CONFIG_USB_SERIAL_MOS7720 is not set
-# CONFIG_USB_SERIAL_MOS7840 is not set
-# CONFIG_USB_SERIAL_MOTOROLA is not set
-# CONFIG_USB_SERIAL_NAVMAN is not set
-# CONFIG_USB_SERIAL_OMNINET is not set
-# CONFIG_USB_SERIAL_OPTICON is not set
-# CONFIG_USB_SERIAL_OPTION is not set
-# CONFIG_USB_SERIAL_OTI6858 is not set
-# CONFIG_USB_SERIAL_PL2303 is not set
-# CONFIG_USB_SERIAL_SAFE is not set
-CONFIG_USB_SERIAL_SAFE_PADDED=y
-# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
-# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
-# CONFIG_USB_SERIAL_SPCP8X5 is not set
-# CONFIG_USB_SERIAL_TI is not set
-# CONFIG_USB_SERIAL_VISOR is not set
-# CONFIG_USB_SERIAL_WHITEHEAT is not set
-# CONFIG_USB_SERIAL_XIRCOM is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_SPEEDTOUCH is not set
-# CONFIG_USB_STKWEBCAM is not set
-CONFIG_USB_STORAGE_ALAUDA=y
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_FREECOM=y
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE is not set
-CONFIG_USB_STORAGE_JUMPSHOT=y
-CONFIG_USB_STORAGE_KARMA=y
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-# CONFIG_USB_STORAGE_SIERRA is not set
-CONFIG_USB_STORAGE_USBAT=y
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_TMC is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_UEAGLEATM is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_VIDEO_CLASS is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_W9968CF is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_WUSB_CBAF is not set
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_XUSBATM is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_UWB is not set
-# CONFIG_VETH is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_VIDEO_ADV7170 is not set
-# CONFIG_VIDEO_ADV7175 is not set
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_ALLOW_V4L1 is not set
-# CONFIG_VIDEO_BT819 is not set
-# CONFIG_VIDEO_BT848 is not set
-# CONFIG_VIDEO_BT856 is not set
-# CONFIG_VIDEO_BT866 is not set
-# CONFIG_VIDEO_CAFE_CCIC is not set
-# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CS5345 is not set
-# CONFIG_VIDEO_CS53L32A is not set
-# CONFIG_VIDEO_CX2341X is not set
-# CONFIG_VIDEO_CX25840 is not set
-# CONFIG_VIDEO_CX88 is not set
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_DPC is not set
-# CONFIG_VIDEO_EM28XX is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
-# CONFIG_VIDEO_HEXIUM_GEMINI is not set
-# CONFIG_VIDEO_HEXIUM_ORION is not set
-# CONFIG_VIDEO_IVTV is not set
-# CONFIG_VIDEO_KS0127 is not set
-# CONFIG_VIDEO_M52790 is not set
-# CONFIG_VIDEO_MEDIA is not set
-# CONFIG_VIDEO_MSP3400 is not set
-# CONFIG_VIDEO_MXB is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_VIDEO_OV7670 is not set
-# CONFIG_VIDEO_OVCAMCHIP is not set
-# CONFIG_VIDEO_PMS is not set
-# CONFIG_VIDEO_PVRUSB2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_SAA7110 is not set
-# CONFIG_VIDEO_SAA7111 is not set
-# CONFIG_VIDEO_SAA7114 is not set
-# CONFIG_VIDEO_SAA711X is not set
-# CONFIG_VIDEO_SAA7127 is not set
-# CONFIG_VIDEO_SAA7134 is not set
-# CONFIG_VIDEO_SAA717X is not set
-# CONFIG_VIDEO_SAA7185 is not set
-# CONFIG_VIDEO_SAA7191 is not set
-# CONFIG_VIDEO_SH_MOBILE_CEU is not set
-# CONFIG_VIDEO_STRADIS is not set
-# CONFIG_VIDEO_TCM825X is not set
-# CONFIG_VIDEO_TDA7432 is not set
-# CONFIG_VIDEO_TDA9840 is not set
-# CONFIG_VIDEO_TDA9875 is not set
-# CONFIG_VIDEO_TEA6415C is not set
-# CONFIG_VIDEO_TEA6420 is not set
-# CONFIG_VIDEO_TLV320AIC23B is not set
-# CONFIG_VIDEO_TVAUDIO is not set
-# CONFIG_VIDEO_TVP514X is not set
-# CONFIG_VIDEO_TVP5150 is not set
-# CONFIG_VIDEO_UPD64031A is not set
-# CONFIG_VIDEO_UPD64083 is not set
-# CONFIG_VIDEO_USBVISION is not set
-CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_VIDEO_V4L1 is not set
-# CONFIG_VIDEO_V4L2_COMMON is not set
-# CONFIG_VIDEO_V4L2 is not set
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_VP27SMPX is not set
-# CONFIG_VIDEO_VPX3220 is not set
-# CONFIG_VIDEO_WM8739 is not set
-# CONFIG_VIDEO_WM8775 is not set
-# CONFIG_VIDEO_ZORAN is not set
-# CONFIG_VIRQ_DEBUG is not set
-CONFIG_VIRT_TO_BUS=y
-# CONFIG_VIRTUALIZATION is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_VLAN_8021Q_GVRP is not set
-CONFIG_VLAN_8021Q=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_VMSPLIT_1G is not set
-# CONFIG_VMSPLIT_2G is not set
-CONFIG_VMSPLIT_3G=y
-# CONFIG_VT is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_W1 is not set
-# CONFIG_W1_MASTER_DS1WM is not set
-# CONFIG_W1_MASTER_DS2482 is not set
-# CONFIG_W1_MASTER_DS2490 is not set
-# CONFIG_W1_MASTER_GPIO is not set
-# CONFIG_W1_MASTER_MATROX is not set
-# CONFIG_W1_SLAVE_BQ27000 is not set
-# CONFIG_W1_SLAVE_DS2431 is not set
-# CONFIG_W1_SLAVE_DS2433 is not set
-# CONFIG_W1_SLAVE_DS2760 is not set
-# CONFIG_W1_SLAVE_SMEM is not set
-# CONFIG_W1_SLAVE_THERM is not set
-# CONFIG_W83627HF_WDT is not set
-# CONFIG_W83697HF_WDT is not set
-# CONFIG_W83877F_WDT is not set
-# CONFIG_W83977F_WDT is not set
-# CONFIG_WAN is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_WANXL is not set
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WDTPCI is not set
-# CONFIG_WIMAX is not set
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS=y
-CONFIG_WLAN_80211=y
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_X25 is not set
-# CONFIG_XFRM_IPCOMP is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_USER is not set
-CONFIG_XFRM=y
-# CONFIG_XFS_DEBUG is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_SECURITY is not set
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_YAFFS_FS is not set
-# CONFIG_YAM is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_YENTA is not set
-# CONFIG_YENTA_O2 is not set
-# CONFIG_YENTA_RICOH is not set
-# CONFIG_YENTA_TI is not set
-# CONFIG_YENTA_TOSHIBA is not set
-# CONFIG_ZD1211RW_DEBUG is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_ZEROPLUS_FF is not set
-# CONFIG_ZISOFS_FS is not set
-CONFIG_ZISOFS=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_ZONE_DMA=y
+++ /dev/null
-/*
- * character device wrapper for generic gpio layer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA02111-1307USA
- *
- * Feedback, Bugs... blogic@openwrt.org
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-#include <asm/atomic.h>
-#include <linux/init.h>
-#include <linux/genhd.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/gpio_dev.h>
-
-#define DRVNAME "gpiodev"
-#define DEVNAME "gpio"
-
-static int dev_major;
-static unsigned int gpio_access_mask;
-static struct class *gpiodev_class;
-
-/* Counter is 1, if the device is not opened and zero (or less) if opened. */
-static atomic_t gpio_open_cnt = ATOMIC_INIT(1);
-
-static int
-gpio_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg)
-{
- int retval = 0;
-
- if (((1 << arg) & gpio_access_mask) != (1 << arg))
- {
- retval = -EINVAL;
- goto out;
- }
-
- switch (cmd)
- {
- case GPIO_GET:
- retval = gpio_get_value(arg);
- break;
-
- case GPIO_SET:
- gpio_set_value(arg, 1);
- break;
-
- case GPIO_CLEAR:
- gpio_set_value(arg, 0);
- break;
-
- case GPIO_DIR_IN:
- gpio_direction_input(arg);
- break;
-
- case GPIO_DIR_OUT:
- gpio_direction_output(arg, 0);
- break;
-
- default:
- retval = -EINVAL;
- break;
- }
-
-out:
- return retval;
-}
-
-static int
-gpio_open(struct inode *inode, struct file *file)
-{
- int result = 0;
- unsigned int dev_minor = MINOR(inode->i_rdev);
-
- if (dev_minor != 0)
- {
- printk(KERN_ERR DRVNAME ": trying to access unknown minor device -> %d\n", dev_minor);
- result = -ENODEV;
- goto out;
- }
-
- /* FIXME: We should really allow multiple applications to open the device
- * at the same time, as long as the apps access different IO pins.
- * The generic gpio-registration functions can be used for that.
- * Two new IOCTLs have to be introduced for that. Need to check userspace
- * compatibility first. --mb */
- if (!atomic_dec_and_test(&gpio_open_cnt)) {
- atomic_inc(&gpio_open_cnt);
- printk(KERN_ERR DRVNAME ": Device with minor ID %d already in use\n", dev_minor);
- result = -EBUSY;
- goto out;
- }
-
-out:
- return result;
-}
-
-static int
-gpio_close(struct inode * inode, struct file * file)
-{
- smp_mb__before_atomic_inc();
- atomic_inc(&gpio_open_cnt);
-
- return 0;
-}
-
-struct file_operations gpio_fops = {
- ioctl: gpio_ioctl,
- open: gpio_open,
- release: gpio_close
-};
-
-static int
-gpio_probe(struct platform_device *dev)
-{
- int result = 0;
-
- dev_major = register_chrdev(0, DEVNAME, &gpio_fops);
- if (!dev_major)
- {
- printk(KERN_ERR DRVNAME ": Error whilst opening %s \n", DEVNAME);
- result = -ENODEV;
- goto out;
- }
-
- gpiodev_class = class_create(THIS_MODULE, DRVNAME);
- device_create(gpiodev_class, NULL, MKDEV(dev_major, 0), dev, DEVNAME);
-
- printk(KERN_INFO DRVNAME ": gpio device registered with major %d\n", dev_major);
-
- if (dev->num_resources != 1)
- {
- printk(KERN_ERR DRVNAME ": device may only have 1 resource\n");
- result = -ENODEV;
- goto out;
- }
-
- gpio_access_mask = dev->resource[0].start;
-
- printk(KERN_INFO DRVNAME ": gpio platform device registered with access mask %08X\n", gpio_access_mask);
-out:
- return result;
-}
-
-static int
-gpio_remove(struct platform_device *dev)
-{
- unregister_chrdev(dev_major, DEVNAME);
- return 0;
-}
-
-static struct
-platform_driver gpio_driver = {
- .probe = gpio_probe,
- .remove = gpio_remove,
- .driver = {
- .name = "GPIODEV",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init
-gpio_mod_init(void)
-{
- int ret = platform_driver_register(&gpio_driver);
- if (ret)
- printk(KERN_INFO DRVNAME ": Error registering platfom driver!");
-
- return ret;
-}
-
-static void __exit
-gpio_mod_exit(void)
-{
- platform_driver_unregister(&gpio_driver);
-}
-
-module_init (gpio_mod_init);
-module_exit (gpio_mod_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("John Crispin / OpenWrt");
-MODULE_DESCRIPTION("Character device for for generic gpio api");
+++ /dev/null
-/*
- * Driver for buttons on GPIO lines not capable of generating interrupts
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: /drivers/input/misc/cobalt_btns.c
- * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
- *
- * also was based on: /drivers/input/keyboard/gpio_keys.c
- * Copyright 2005 Phil Blundell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-
-#include <linux/input.h>
-#include <linux/input-polldev.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <linux/gpio_buttons.h>
-
-#include <asm/gpio.h>
-
-#define DRV_NAME "gpio-buttons"
-#define DRV_VERSION "0.1.1"
-#define PFX DRV_NAME ": "
-
-struct gpio_buttons_dev {
- struct input_polled_dev *poll_dev;
- struct gpio_buttons_platform_data *pdata;
-};
-
-static void gpio_buttons_poll(struct input_polled_dev *dev)
-{
- struct gpio_buttons_dev *bdev = dev->private;
- struct gpio_buttons_platform_data *pdata = bdev->pdata;
- struct input_dev *input = dev->input;
- int i;
-
- for (i = 0; i < bdev->pdata->nbuttons; i++) {
- struct gpio_button *button = &pdata->buttons[i];
- unsigned int type = button->type ?: EV_KEY;
- int state;
-
- state = gpio_get_value(button->gpio) ? 1 : 0;
- state ^= button->active_low;
-
- if (state) {
- button->count++;
- } else {
- if (button->count >= button->threshold) {
- input_event(input, type, button->code, 1);
- input_sync(input);
- }
- button->count = 0;
- }
-
- if (button->count == button->threshold) {
- input_event(input, type, button->code, 0);
- input_sync(input);
- }
- }
-}
-
-static int __devinit gpio_buttons_probe(struct platform_device *pdev)
-{
- struct gpio_buttons_platform_data *pdata = pdev->dev.platform_data;
- struct gpio_buttons_dev *bdev;
- struct input_polled_dev *poll_dev;
- struct input_dev *input;
- int error, i;
-
-
- if (!pdata)
- return -ENXIO;
-
- bdev = kzalloc(sizeof(*bdev), GFP_KERNEL);
- if (!bdev) {
- printk(KERN_ERR DRV_NAME "no memory for device\n");
- return -ENOMEM;
- }
-
- poll_dev = input_allocate_polled_device();
- if (!poll_dev) {
- printk(KERN_ERR DRV_NAME "no memory for polled device\n");
- error = -ENOMEM;
- goto err_free_bdev;
- }
-
- poll_dev->private = bdev;
- poll_dev->poll = gpio_buttons_poll;
- poll_dev->poll_interval = pdata->poll_interval;
-
- input = poll_dev->input;
-
- input->evbit[0] = BIT(EV_KEY);
- input->name = pdev->name;
- input->phys = "gpio-buttons/input0";
- input->dev.parent = &pdev->dev;
-
- input->id.bustype = BUS_HOST;
- input->id.vendor = 0x0001;
- input->id.product = 0x0001;
- input->id.version = 0x0100;
-
- for (i = 0; i < pdata->nbuttons; i++) {
- struct gpio_button *button = &pdata->buttons[i];
- unsigned int gpio = button->gpio;
- unsigned int type = button->type ?: EV_KEY;
-
- error = gpio_request(gpio, button->desc ?
- button->desc : DRV_NAME);
- if (error) {
- printk(KERN_ERR PFX "unable to claim gpio %u, "
- "error %d\n", gpio, error);
- goto err_free_gpio;
- }
-
- error = gpio_direction_input(gpio);
- if (error) {
- printk(KERN_ERR PFX "unable to set direction on "
- "gpio %u, error %d\n", gpio, error);
- goto err_free_gpio;
- }
-
- input_set_capability(input, type, button->code);
- button->count = 0;
- }
-
- bdev->poll_dev = poll_dev;
- bdev->pdata = pdata;
- platform_set_drvdata(pdev, bdev);
-
- error = input_register_polled_device(poll_dev);
- if (error) {
- printk(KERN_ERR PFX "unable to register polled device, "
- "error %d\n", error);
- goto err_free_gpio;
- }
-
- return 0;
-
-err_free_gpio:
- for (i = i - 1; i >= 0; i--)
- gpio_free(pdata->buttons[i].gpio);
-
- input_free_polled_device(poll_dev);
-
-err_free_bdev:
- kfree(bdev);
-
- platform_set_drvdata(pdev, NULL);
- return error;
-}
-
-static int __devexit gpio_buttons_remove(struct platform_device *pdev)
-{
- struct gpio_buttons_dev *bdev = platform_get_drvdata(pdev);
- struct gpio_buttons_platform_data *pdata = bdev->pdata;
- int i;
-
- input_unregister_polled_device(bdev->poll_dev);
-
- for (i = 0; i < pdata->nbuttons; i++)
- gpio_free(pdata->buttons[i].gpio);
-
- input_free_polled_device(bdev->poll_dev);
-
- kfree(bdev);
- platform_set_drvdata(pdev, NULL);
-
- return 0;
-}
-
-static struct platform_driver gpio_buttons_driver = {
- .probe = gpio_buttons_probe,
- .remove = __devexit_p(gpio_buttons_remove),
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init gpio_buttons_init(void)
-{
- printk(KERN_INFO DRV_NAME " driver version " DRV_VERSION "\n");
- return platform_driver_register(&gpio_buttons_driver);
-}
-
-static void __exit gpio_buttons_exit(void)
-{
- platform_driver_unregister(&gpio_buttons_driver);
-}
-
-module_init(gpio_buttons_init);
-module_exit(gpio_buttons_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_VERSION(DRV_VERSION);
-MODULE_DESCRIPTION("Polled buttons driver for CPU GPIOs");
-
+++ /dev/null
-/*
- * LEDs driver for PCEngines ALIX 2/3 series
- *
- * Copyright (C) 2007 Petr Liebman
- *
- * Based on leds-wrap.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-#include <asm/io.h>
-
-#define DRVNAME "alix-led"
-
-#define ALIX_LED1_PORT (0x6100)
-#define ALIX_LED1_ON (1<<22)
-#define ALIX_LED1_OFF (1<<6)
-
-#define ALIX_LED2_PORT (0x6180)
-#define ALIX_LED2_ON (1<<25)
-#define ALIX_LED2_OFF (1<<9)
-
-#define ALIX_LED3_PORT (0x6180)
-#define ALIX_LED3_ON (1<<27)
-#define ALIX_LED3_OFF (1<<11)
-
-
-static struct platform_device *pdev;
-
-static void alix_led_set_1(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- outl(ALIX_LED1_ON, ALIX_LED1_PORT);
- else
- outl(ALIX_LED1_OFF, ALIX_LED1_PORT);
-}
-
-static void alix_led_set_2(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- outl(ALIX_LED2_ON, ALIX_LED2_PORT);
- else
- outl(ALIX_LED2_OFF, ALIX_LED2_PORT);
-}
-
-static void alix_led_set_3(struct led_classdev *led_cdev,
- enum led_brightness value)
-{
- if (value)
- outl(ALIX_LED3_ON, ALIX_LED3_PORT);
- else
- outl(ALIX_LED3_OFF, ALIX_LED3_PORT);
-}
-
-static struct led_classdev alix_led_1 = {
- .name = "alix:1",
- .brightness_set = alix_led_set_1,
-};
-
-static struct led_classdev alix_led_2 = {
- .name = "alix:2",
- .brightness_set = alix_led_set_2,
-};
-
-static struct led_classdev alix_led_3 = {
- .name = "alix:3",
- .brightness_set = alix_led_set_3,
-};
-
-
-#ifdef CONFIG_PM
-static int alix_led_suspend(struct platform_device *dev,
- pm_message_t state)
-{
- led_classdev_suspend(&alix_led_1);
- led_classdev_suspend(&alix_led_2);
- led_classdev_suspend(&alix_led_3);
- return 0;
-}
-
-static int alix_led_resume(struct platform_device *dev)
-{
- led_classdev_resume(&alix_led_1);
- led_classdev_resume(&alix_led_2);
- led_classdev_resume(&alix_led_3);
- return 0;
-}
-#else
-#define alix_led_suspend NULL
-#define alix_led_resume NULL
-#endif
-
-static int alix_led_probe(struct platform_device *pdev)
-{
- int ret;
-
- ret = led_classdev_register(&pdev->dev, &alix_led_1);
- if (ret >= 0)
- {
- ret = led_classdev_register(&pdev->dev, &alix_led_2);
- if (ret >= 0)
- {
- ret = led_classdev_register(&pdev->dev, &alix_led_3);
- if (ret < 0)
- led_classdev_unregister(&alix_led_2);
- }
- if (ret < 0)
- led_classdev_unregister(&alix_led_1);
- }
- return ret;
-}
-
-static int alix_led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&alix_led_1);
- led_classdev_unregister(&alix_led_2);
- led_classdev_unregister(&alix_led_3);
- return 0;
-}
-
-static struct platform_driver alix_led_driver = {
- .probe = alix_led_probe,
- .remove = alix_led_remove,
- .suspend = alix_led_suspend,
- .resume = alix_led_resume,
- .driver = {
- .name = DRVNAME,
- .owner = THIS_MODULE,
- },
-};
-
-static int __init alix_led_init(void)
-{
- int ret;
-
- ret = platform_driver_register(&alix_led_driver);
- if (ret < 0)
- goto out;
-
- pdev = platform_device_register_simple(DRVNAME, -1, NULL, 0);
- if (IS_ERR(pdev)) {
- ret = PTR_ERR(pdev);
- platform_driver_unregister(&alix_led_driver);
- goto out;
- }
-
-out:
- return ret;
-}
-
-static void __exit alix_led_exit(void)
-{
- platform_device_unregister(pdev);
- platform_driver_unregister(&alix_led_driver);
-}
-
-module_init(alix_led_init);
-module_exit(alix_led_exit);
-
-MODULE_AUTHOR("Petr Liebman");
-MODULE_DESCRIPTION("PCEngines ALIX LED driver");
-MODULE_LICENSE("GPL");
-
+++ /dev/null
-/*
- * LED Morse Trigger
- *
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: drivers/led/ledtrig-timer.c
- * Copyright 2005-2006 Openedhand Ltd.
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * also based on the patch '[PATCH] 2.5.59 morse code panics' posted
- * in the LKML by Tomas Szepe at Thu, 30 Jan 2003
- * Copyright (C) 2002 Andrew Rodland <arodland@noln.com>
- * Copyright (C) 2003 Tomas Szepe <szepe@pinerecords.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/module.h>
-#include <linux/jiffies.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/timer.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-
-#include "leds.h"
-
-#define MORSE_DELAY_BASE (HZ/2)
-
-#define MORSE_STATE_BLINK_START 0
-#define MORSE_STATE_BLINK_STOP 1
-
-#define MORSE_DIT_LEN 1
-#define MORSE_DAH_LEN 3
-#define MORSE_SPACE_LEN 7
-
-struct morse_trig_data {
- unsigned long delay;
- char *msg;
-
- unsigned char morse;
- unsigned char state;
- char *msgpos;
- struct timer_list timer;
-};
-
-const unsigned char morsetable[] = {
- 0122, 0, 0310, 0, 0, 0163, /* "#$%&' */
- 055, 0155, 0, 0, 0163, 0141, 0152, 0051, /* ()*+,-./ */
- 077, 076, 074, 070, 060, 040, 041, 043, 047, 057, /* 0-9 */
- 0107, 0125, 0, 0061, 0, 0114, 0, /* :;<=>?@ */
- 006, 021, 025, 011, 002, 024, 013, 020, 004, /* A-I */
- 036, 015, 022, 007, 005, 017, 026, 033, 012, /* J-R */
- 010, 003, 014, 030, 016, 031, 035, 023, /* S-Z */
- 0, 0, 0, 0, 0154 /* [\]^_ */
-};
-
-static inline unsigned char tomorse(char c) {
- if (c >= 'a' && c <= 'z')
- c = c - 'a' + 'A';
- if (c >= '"' && c <= '_') {
- return morsetable[c - '"'];
- } else
- return 0;
-}
-
-static inline unsigned long dit_len(struct morse_trig_data *morse_data)
-{
- return MORSE_DIT_LEN*morse_data->delay;
-}
-
-static inline unsigned long dah_len(struct morse_trig_data *morse_data)
-{
- return MORSE_DAH_LEN*morse_data->delay;
-}
-
-static inline unsigned long space_len(struct morse_trig_data *morse_data)
-{
- return MORSE_SPACE_LEN*morse_data->delay;
-}
-
-static void morse_timer_function(unsigned long data)
-{
- struct led_classdev *led_cdev = (struct led_classdev *)data;
- struct morse_trig_data *morse_data = led_cdev->trigger_data;
- unsigned long brightness = LED_OFF;
- unsigned long delay = 0;
-
- if (!morse_data->msg)
- goto set_led;
-
- switch (morse_data->state) {
- case MORSE_STATE_BLINK_START:
- /* Starting a new blink. We have a valid code in morse. */
- delay = (morse_data->morse & 001) ? dah_len(morse_data):
- dit_len(morse_data);
- brightness = LED_FULL;
- morse_data->state = MORSE_STATE_BLINK_STOP;
- morse_data->morse >>= 1;
- break;
- case MORSE_STATE_BLINK_STOP:
- /* Coming off of a blink. */
- morse_data->state = MORSE_STATE_BLINK_START;
-
- if (morse_data->morse > 1) {
- /* Not done yet, just a one-dit pause. */
- delay = dit_len(morse_data);
- break;
- }
-
- /* Get a new char, figure out how much space. */
- /* First time through */
- if (!morse_data->msgpos)
- morse_data->msgpos = (char *)morse_data->msg;
-
- if (!*morse_data->msgpos) {
- /* Repeating */
- morse_data->msgpos = (char *)morse_data->msg;
- delay = space_len(morse_data);
- } else {
- /* Inter-letter space */
- delay = dah_len(morse_data);
- }
-
- if (!(morse_data->morse = tomorse(*morse_data->msgpos))) {
- delay = space_len(morse_data);
- /* And get us back here */
- morse_data->state = MORSE_STATE_BLINK_STOP;
- }
- morse_data->msgpos++;
- break;
- }
-
- mod_timer(&morse_data->timer, jiffies + msecs_to_jiffies(delay));
-
-set_led:
- led_set_brightness(led_cdev, brightness);
-}
-
-static ssize_t _morse_delay_show(struct led_classdev *led_cdev, char *buf)
-{
- struct morse_trig_data *morse_data = led_cdev->trigger_data;
-
- sprintf(buf, "%lu\n", morse_data->delay);
-
- return strlen(buf) + 1;
-}
-
-static ssize_t _morse_delay_store(struct led_classdev *led_cdev,
- const char *buf, size_t size)
-{
- struct morse_trig_data *morse_data = led_cdev->trigger_data;
- char *after;
- unsigned long state = simple_strtoul(buf, &after, 10);
- size_t count = after - buf;
- int ret = -EINVAL;
-
- if (*after && isspace(*after))
- count++;
-
- if (count == size) {
- morse_data->delay = state;
- mod_timer(&morse_data->timer, jiffies + 1);
- ret = count;
- }
-
- return ret;
-}
-
-static ssize_t _morse_msg_show(struct led_classdev *led_cdev, char *buf)
-{
- struct morse_trig_data *morse_data = led_cdev->trigger_data;
-
- if (!morse_data->msg)
- sprintf(buf, "<none>\n");
- else
- sprintf(buf, "%s\n", morse_data->msg);
-
- return strlen(buf) + 1;
-}
-
-static ssize_t _morse_msg_store(struct led_classdev *led_cdev,
- const char *buf, size_t size)
-{
- struct morse_trig_data *morse_data = led_cdev->trigger_data;
- char *m;
-
- m = kmalloc(size, GFP_KERNEL);
- if (!m)
- return -ENOMEM;
-
- memcpy(m,buf,size);
- m[size]='\0';
-
- if (morse_data->msg)
- kfree(morse_data->msg);
-
- morse_data->msg = m;
- morse_data->msgpos = NULL;
- morse_data->state = MORSE_STATE_BLINK_STOP;
-
- mod_timer(&morse_data->timer, jiffies + 1);
-
- return size;
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,23)
-static ssize_t morse_delay_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
-
- return _morse_delay_show(led_cdev, buf);
-}
-
-static ssize_t morse_delay_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
-
- return _morse_delay_store(led_cdev, buf, size);
-}
-
-static ssize_t morse_msg_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
-
- return _morse_msg_show(led_cdev, buf);
-}
-
-static ssize_t morse_msg_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
-
- return _morse_msg_store(led_cdev, buf, size);
-}
-
-static DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
-static DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
-
-#define led_device_create_file(leddev, attr) \
- device_create_file(leddev->dev, &dev_attr_ ## attr)
-#define led_device_remove_file(leddev, attr) \
- device_remove_file(leddev->dev, &dev_attr_ ## attr)
-
-#else
-static ssize_t morse_delay_show(struct class_device *dev, char *buf)
-{
- struct led_classdev *led_cdev = class_get_devdata(dev);
-
- return _morse_delay_show(led_cdev, buf);
-}
-
-static ssize_t morse_delay_store(struct class_device *dev, const char *buf,
- size_t size)
-{
- struct led_classdev *led_cdev = class_get_devdata(dev);
-
- return _morse_delay_store(led_cdev, buf, size);
-}
-
-static ssize_t morse_msg_show(struct class_device *dev, char *buf)
-{
- struct led_classdev *led_cdev = class_get_devdata(dev);
-
- return _morse_msg_show(led_cdev, buf);
-}
-
-static ssize_t morse_msg_store(struct class_device *dev, const char *buf,
- size_t size)
-{
- struct led_classdev *led_cdev = class_get_devdata(dev);
-
- return _morse_msg_store(led_cdev, buf, size);
-}
-
-static CLASS_DEVICE_ATTR(delay, 0644, morse_delay_show, morse_delay_store);
-static CLASS_DEVICE_ATTR(message, 0644, morse_msg_show, morse_msg_store);
-
-#define led_device_create_file(leddev, attr) \
- class_device_create_file(leddev->class_dev, &class_device_attr_ ## attr)
-#define led_device_remove_file(leddev, attr) \
- class_device_remove_file(leddev->class_dev, &class_device_attr_ ## attr)
-
-#endif
-
-static void morse_trig_activate(struct led_classdev *led_cdev)
-{
- struct morse_trig_data *morse_data;
- int rc;
-
- morse_data = kzalloc(sizeof(*morse_data), GFP_KERNEL);
- if (!morse_data)
- return;
-
- morse_data->delay = MORSE_DELAY_BASE;
- init_timer(&morse_data->timer);
- morse_data->timer.function = morse_timer_function;
- morse_data->timer.data = (unsigned long)led_cdev;
-
- rc = led_device_create_file(led_cdev, delay);
- if (rc) goto err;
-
- rc = led_device_create_file(led_cdev, message);
- if (rc) goto err_delay;
-
- led_cdev->trigger_data = morse_data;
-
- return;
-
-err_delay:
- led_device_remove_file(led_cdev, delay);
-err:
- kfree(morse_data);
-}
-
-static void morse_trig_deactivate(struct led_classdev *led_cdev)
-{
- struct morse_trig_data *morse_data = led_cdev->trigger_data;
-
- if (!morse_data)
- return;
-
- led_device_remove_file(led_cdev, message);
- led_device_remove_file(led_cdev, delay);
-
- del_timer_sync(&morse_data->timer);
- if (morse_data->msg)
- kfree(morse_data->msg);
-
- kfree(morse_data);
-}
-
-static struct led_trigger morse_led_trigger = {
- .name = "morse",
- .activate = morse_trig_activate,
- .deactivate = morse_trig_deactivate,
-};
-
-static int __init morse_trig_init(void)
-{
- return led_trigger_register(&morse_led_trigger);
-}
-
-static void __exit morse_trig_exit(void)
-{
- led_trigger_unregister(&morse_led_trigger);
-}
-
-module_init(morse_trig_init);
-module_exit(morse_trig_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION("Morse LED trigger");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * LED Kernel Netdev Trigger
- *
- * Toggles the LED to reflect the link and traffic state of a named net device
- *
- * Copyright 2007 Oliver Jowett <oliver@opencloud.com>
- *
- * Derived from ledtrig-timer.c which is:
- * Copyright 2005-2006 Openedhand Ltd.
- * Author: Richard Purdie <rpurdie@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/jiffies.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/spinlock.h>
-#include <linux/device.h>
-#include <linux/sysdev.h>
-#include <linux/netdevice.h>
-#include <linux/timer.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
-#include <linux/version.h>
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
-#include <net/net_namespace.h>
-#endif
-
-#include "leds.h"
-
-/*
- * Configurable sysfs attributes:
- *
- * device_name - network device name to monitor
- *
- * interval - duration of LED blink, in milliseconds
- *
- * mode - either "none" (LED is off) or a space separated list of one or more of:
- * link: LED's normal state reflects whether the link is up (has carrier) or not
- * tx: LED blinks on transmitted data
- * rx: LED blinks on receive data
- *
- * Some suggestions:
- *
- * Simple link status LED:
- * $ echo netdev >someled/trigger
- * $ echo eth0 >someled/device_name
- * $ echo link >someled/mode
- *
- * Ethernet-style link/activity LED:
- * $ echo netdev >someled/trigger
- * $ echo eth0 >someled/device_name
- * $ echo "link tx rx" >someled/mode
- *
- * Modem-style tx/rx LEDs:
- * $ echo netdev >led1/trigger
- * $ echo ppp0 >led1/device_name
- * $ echo tx >led1/mode
- * $ echo netdev >led2/trigger
- * $ echo ppp0 >led2/device_name
- * $ echo rx >led2/mode
- *
- */
-
-#define MODE_LINK 1
-#define MODE_TX 2
-#define MODE_RX 4
-
-struct led_netdev_data {
- rwlock_t lock;
-
- struct timer_list timer;
- struct notifier_block notifier;
-
- struct led_classdev *led_cdev;
- struct net_device *net_dev;
-
- char device_name[IFNAMSIZ];
- unsigned interval;
- unsigned mode;
- unsigned link_up;
- unsigned last_activity;
-};
-
-static void set_baseline_state(struct led_netdev_data *trigger_data)
-{
- if ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up)
- led_set_brightness(trigger_data->led_cdev, LED_FULL);
- else
- led_set_brightness(trigger_data->led_cdev, LED_OFF);
-
- if ((trigger_data->mode & (MODE_TX | MODE_RX)) != 0 && trigger_data->link_up)
- mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
- else
- del_timer(&trigger_data->timer);
-}
-
-static ssize_t led_device_name_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-
- read_lock(&trigger_data->lock);
- sprintf(buf, "%s\n", trigger_data->device_name);
- read_unlock(&trigger_data->lock);
-
- return strlen(buf) + 1;
-}
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
-extern struct net init_net;
-#endif
-
-static ssize_t led_device_name_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-
- if (size < 0 || size >= IFNAMSIZ)
- return -EINVAL;
-
- write_lock(&trigger_data->lock);
-
- strcpy(trigger_data->device_name, buf);
- if (size > 0 && trigger_data->device_name[size-1] == '\n')
- trigger_data->device_name[size-1] = 0;
-
- if (trigger_data->device_name[0] != 0) {
- /* check for existing device to update from */
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26)
- trigger_data->net_dev = dev_get_by_name(&init_net, trigger_data->device_name);
-#else
- trigger_data->net_dev = dev_get_by_name(trigger_data->device_name);
-#endif
- if (trigger_data->net_dev != NULL)
- trigger_data->link_up = (dev_get_flags(trigger_data->net_dev) & IFF_LOWER_UP) != 0;
- set_baseline_state(trigger_data); /* updates LEDs, may start timers */
- }
-
- write_unlock(&trigger_data->lock);
- return size;
-}
-
-static DEVICE_ATTR(device_name, 0644, led_device_name_show, led_device_name_store);
-
-static ssize_t led_mode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-
- read_lock(&trigger_data->lock);
-
- if (trigger_data->mode == 0) {
- strcpy(buf, "none\n");
- } else {
- if (trigger_data->mode & MODE_LINK)
- strcat(buf, "link ");
- if (trigger_data->mode & MODE_TX)
- strcat(buf, "tx ");
- if (trigger_data->mode & MODE_RX)
- strcat(buf, "rx ");
- strcat(buf, "\n");
- }
-
- read_unlock(&trigger_data->lock);
-
- return strlen(buf)+1;
-}
-
-static ssize_t led_mode_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
- char copybuf[1024];
- int new_mode = -1;
- char *p, *token;
-
- /* take a copy since we don't want to trash the inbound buffer when using strsep */
- strncpy(copybuf, buf, sizeof(copybuf));
- copybuf[1023] = 0;
- p = copybuf;
-
- while ((token = strsep(&p, " \t\n")) != NULL) {
- if (!*token)
- continue;
-
- if (new_mode == -1)
- new_mode = 0;
-
- if (!strcmp(token, "none"))
- new_mode = 0;
- else if (!strcmp(token, "tx"))
- new_mode |= MODE_TX;
- else if (!strcmp(token, "rx"))
- new_mode |= MODE_RX;
- else if (!strcmp(token, "link"))
- new_mode |= MODE_LINK;
- else
- return -EINVAL;
- }
-
- if (new_mode == -1)
- return -EINVAL;
-
- write_lock(&trigger_data->lock);
- trigger_data->mode = new_mode;
- set_baseline_state(trigger_data);
- write_unlock(&trigger_data->lock);
-
- return size;
-}
-
-static DEVICE_ATTR(mode, 0644, led_mode_show, led_mode_store);
-
-static ssize_t led_interval_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-
- read_lock(&trigger_data->lock);
- sprintf(buf, "%u\n", jiffies_to_msecs(trigger_data->interval));
- read_unlock(&trigger_data->lock);
-
- return strlen(buf) + 1;
-}
-
-static ssize_t led_interval_store(struct device *dev,
- struct device_attribute *attr, const char *buf, size_t size)
-{
- struct led_classdev *led_cdev = dev_get_drvdata(dev);
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
- int ret = -EINVAL;
- char *after;
- unsigned long value = simple_strtoul(buf, &after, 10);
- size_t count = after - buf;
-
- if (*after && isspace(*after))
- count++;
-
- /* impose some basic bounds on the timer interval */
- if (count == size && value >= 5 && value <= 10000) {
- write_lock(&trigger_data->lock);
- trigger_data->interval = msecs_to_jiffies(value);
- set_baseline_state(trigger_data); // resets timer
- write_unlock(&trigger_data->lock);
- ret = count;
- }
-
- return ret;
-}
-
-static DEVICE_ATTR(interval, 0644, led_interval_show, led_interval_store);
-
-static int netdev_trig_notify(struct notifier_block *nb,
- unsigned long evt,
- void *dv)
-{
- struct net_device *dev = dv;
- struct led_netdev_data *trigger_data = container_of(nb, struct led_netdev_data, notifier);
-
- if (evt != NETDEV_UP && evt != NETDEV_DOWN && evt != NETDEV_CHANGE && evt != NETDEV_REGISTER && evt != NETDEV_UNREGISTER)
- return NOTIFY_DONE;
-
- write_lock(&trigger_data->lock);
-
- if (strcmp(dev->name, trigger_data->device_name))
- goto done;
-
- if (evt == NETDEV_REGISTER) {
- if (trigger_data->net_dev != NULL)
- dev_put(trigger_data->net_dev);
- dev_hold(dev);
- trigger_data->net_dev = dev;
- trigger_data->link_up = 0;
- goto done;
- }
-
- if (evt == NETDEV_UNREGISTER && trigger_data->net_dev != NULL) {
- dev_put(trigger_data->net_dev);
- trigger_data->net_dev = NULL;
- goto done;
- }
-
- /* UP / DOWN / CHANGE */
-
- trigger_data->link_up = (evt != NETDEV_DOWN && netif_carrier_ok(dev));
- set_baseline_state(trigger_data);
-
-done:
- write_unlock(&trigger_data->lock);
- return NOTIFY_DONE;
-}
-
-/* here's the real work! */
-static void netdev_trig_timer(unsigned long arg)
-{
- struct led_netdev_data *trigger_data = (struct led_netdev_data *)arg;
- struct net_device_stats *dev_stats;
- unsigned new_activity;
-
- write_lock(&trigger_data->lock);
-
- if (!trigger_data->link_up || !trigger_data->net_dev || (trigger_data->mode & (MODE_TX | MODE_RX)) == 0) {
- /* we don't need to do timer work, just reflect link state. */
- led_set_brightness(trigger_data->led_cdev, ((trigger_data->mode & MODE_LINK) != 0 && trigger_data->link_up) ? LED_FULL : LED_OFF);
- goto no_restart;
- }
-
- dev_stats = trigger_data->net_dev->get_stats(trigger_data->net_dev);
- new_activity =
- ((trigger_data->mode & MODE_TX) ? dev_stats->tx_packets : 0) +
- ((trigger_data->mode & MODE_RX) ? dev_stats->rx_packets : 0);
-
- if (trigger_data->mode & MODE_LINK) {
- /* base state is ON (link present) */
- /* if there's no link, we don't get this far and the LED is off */
-
- /* OFF -> ON always */
- /* ON -> OFF on activity */
- if (trigger_data->led_cdev->brightness == LED_OFF) {
- led_set_brightness(trigger_data->led_cdev, LED_FULL);
- } else if (trigger_data->last_activity != new_activity) {
- led_set_brightness(trigger_data->led_cdev, LED_OFF);
- }
- } else {
- /* base state is OFF */
- /* ON -> OFF always */
- /* OFF -> ON on activity */
- if (trigger_data->led_cdev->brightness == LED_FULL) {
- led_set_brightness(trigger_data->led_cdev, LED_OFF);
- } else if (trigger_data->last_activity != new_activity) {
- led_set_brightness(trigger_data->led_cdev, LED_FULL);
- }
- }
-
- trigger_data->last_activity = new_activity;
- mod_timer(&trigger_data->timer, jiffies + trigger_data->interval);
-
-no_restart:
- write_unlock(&trigger_data->lock);
-}
-
-static void netdev_trig_activate(struct led_classdev *led_cdev)
-{
- struct led_netdev_data *trigger_data;
- int rc;
-
- trigger_data = kzalloc(sizeof(struct led_netdev_data), GFP_KERNEL);
- if (!trigger_data)
- return;
-
- rwlock_init(&trigger_data->lock);
-
- trigger_data->notifier.notifier_call = netdev_trig_notify;
- trigger_data->notifier.priority = 10;
-
- setup_timer(&trigger_data->timer, netdev_trig_timer, (unsigned long) trigger_data);
-
- trigger_data->led_cdev = led_cdev;
- trigger_data->net_dev = NULL;
- trigger_data->device_name[0] = 0;
-
- trigger_data->mode = 0;
- trigger_data->interval = msecs_to_jiffies(50);
- trigger_data->link_up = 0;
- trigger_data->last_activity = 0;
-
- led_cdev->trigger_data = trigger_data;
-
- rc = device_create_file(led_cdev->dev, &dev_attr_device_name);
- if (rc)
- goto err_out;
- rc = device_create_file(led_cdev->dev, &dev_attr_mode);
- if (rc)
- goto err_out_device_name;
- rc = device_create_file(led_cdev->dev, &dev_attr_interval);
- if (rc)
- goto err_out_mode;
-
- register_netdevice_notifier(&trigger_data->notifier);
- return;
-
-err_out_mode:
- device_remove_file(led_cdev->dev, &dev_attr_mode);
-err_out_device_name:
- device_remove_file(led_cdev->dev, &dev_attr_device_name);
-err_out:
- led_cdev->trigger_data = NULL;
- kfree(trigger_data);
-}
-
-static void netdev_trig_deactivate(struct led_classdev *led_cdev)
-{
- struct led_netdev_data *trigger_data = led_cdev->trigger_data;
-
- if (trigger_data) {
- unregister_netdevice_notifier(&trigger_data->notifier);
-
- device_remove_file(led_cdev->dev, &dev_attr_device_name);
- device_remove_file(led_cdev->dev, &dev_attr_mode);
- device_remove_file(led_cdev->dev, &dev_attr_interval);
-
- write_lock(&trigger_data->lock);
-
- if (trigger_data->net_dev) {
- dev_put(trigger_data->net_dev);
- trigger_data->net_dev = NULL;
- }
-
- write_unlock(&trigger_data->lock);
-
- del_timer_sync(&trigger_data->timer);
-
- kfree(trigger_data);
- }
-}
-
-static struct led_trigger netdev_led_trigger = {
- .name = "netdev",
- .activate = netdev_trig_activate,
- .deactivate = netdev_trig_deactivate,
-};
-
-static int __init netdev_trig_init(void)
-{
- return led_trigger_register(&netdev_led_trigger);
-}
-
-static void __exit netdev_trig_exit(void)
-{
- led_trigger_unregister(&netdev_led_trigger);
-}
-
-module_init(netdev_trig_init);
-module_exit(netdev_trig_exit);
-
-MODULE_AUTHOR("Oliver Jowett <oliver@opencloud.com>");
-MODULE_DESCRIPTION("Netdev LED trigger");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Definitions for the GPIO buttons interface driver
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: /include/linux/gpio_keys.h
- * The original gpio_keys.h seems not to have a license.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _GPIO_BUTTONS_H_
-#define _GPIO_BUTTONS_H_
-
-struct gpio_button {
- int gpio; /* GPIO line number */
- int active_low;
- char *desc; /* button description */
- int type; /* input event type (EV_KEY, EV_SW) */
- int code; /* input event code (KEY_*, SW_*) */
- int count;
- int threshold; /* count threshold */
-};
-
-struct gpio_buttons_platform_data {
- struct gpio_button *buttons;
- int nbuttons; /* number of buttons */
- int poll_interval; /* polling interval */
-};
-
-#endif /* _GPIO_BUTTONS_H_ */
-
+++ /dev/null
-#ifndef _GPIODEV_H__
-#define _GPIODEV_H__
-
-#define IOC_GPIODEV_MAGIC 'B'
-#define GPIO_GET _IO(IOC_GPIODEV_MAGIC, 10)
-#define GPIO_SET _IO(IOC_GPIODEV_MAGIC, 11)
-#define GPIO_CLEAR _IO(IOC_GPIODEV_MAGIC, 12)
-#define GPIO_DIR_IN _IO(IOC_GPIODEV_MAGIC, 13)
-#define GPIO_DIR_OUT _IO(IOC_GPIODEV_MAGIC, 14)
-
-#endif
+++ /dev/null
---- a/Makefile
-+++ b/Makefile
-@@ -560,6 +560,9 @@ endif
- NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
- CHECKFLAGS += $(NOSTDINC_FLAGS)
-
-+# improve gcc optimization
-+CFLAGS += $(call cc-option,-funit-at-a-time,)
-+
- # warn about C99 declaration after statement
- KBUILD_CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
-
+++ /dev/null
---- a/arch/mips/include/asm/system.h
-+++ b/arch/mips/include/asm/system.h
-@@ -187,7 +187,7 @@ extern __u64 __xchg_u64_unsupported_on_3
- if something tries to do an invalid xchg(). */
- extern void __xchg_called_with_bad_pointer(void);
-
--static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
-+static __always_inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
- {
- switch (size) {
- case 4:
+++ /dev/null
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -51,6 +51,7 @@
- #define SST49LF040B 0x0050
- #define SST49LF008A 0x005a
- #define AT49BV6416 0x00d6
-+#define MANUFACTURER_SAMSUNG 0x00ec
-
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -375,12 +376,19 @@ struct mtd_info *cfi_cmdset_0002(struct
-
- if (extp->MajorVersion != '1' ||
- (extp->MinorVersion < '0' || extp->MinorVersion > '4')) {
-- printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
-- "version %c.%c.\n", extp->MajorVersion,
-- extp->MinorVersion);
-- kfree(extp);
-- kfree(mtd);
-- return NULL;
-+ if (cfi->mfr == MANUFACTURER_SAMSUNG &&
-+ (extp->MajorVersion == '3' && extp->MinorVersion == '3')) {
-+ printk(KERN_NOTICE " Newer Samsung flash detected, "
-+ "should be compatibile with Amd/Fujitsu.\n");
-+ }
-+ else {
-+ printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
-+ "version %c.%c.\n", extp->MajorVersion,
-+ extp->MinorVersion);
-+ kfree(extp);
-+ kfree(mtd);
-+ return NULL;
-+ }
- }
-
- /* Install our own private info structure */
+++ /dev/null
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -121,6 +121,8 @@
- #endif
- .endm
-
-+ j kernel_entry
-+ nop
- #ifndef CONFIG_NO_EXCEPT_FILL
- /*
- * Reserved space for exception handlers.
+++ /dev/null
---- /dev/null
-+++ b/include/asm-mips/mips_machine.h
-@@ -0,0 +1,47 @@
-+/*
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#ifndef __ASM_MIPS_MACHINE_H
-+#define __ASM_MIPS_MACHINE_H
-+
-+#include <linux/init.h>
-+#include <linux/list.h>
-+
-+#define MIPS_MACHINE_NAME_LEN 64
-+
-+struct mips_machine {
-+ unsigned long mach_type;
-+ void (*mach_setup)(void);
-+ unsigned char mach_name[MIPS_MACHINE_NAME_LEN];
-+ struct list_head list;
-+};
-+
-+void mips_machine_register(struct mips_machine *) __init;
-+void mips_machine_setup(unsigned long machtype) __init;
-+
-+extern unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN];
-+
-+#define MIPS_MACHINE(_type, _name, _setup) \
-+static struct mips_machine machine_##_type __initdata = \
-+{ \
-+ .mach_type = _type, \
-+ .mach_name = _name, \
-+ .mach_setup = _setup, \
-+}; \
-+ \
-+static int __init register_machine_##_type(void) \
-+{ \
-+ mips_machine_register(&machine_##_type); \
-+ return 0; \
-+} \
-+ \
-+pure_initcall(register_machine_##_type)
-+
-+#endif /* __ASM_MIPS_MACHINE_H */
-+
---- /dev/null
-+++ b/arch/mips/kernel/mips_machine.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <asm/mips_machine.h>
-+#include <asm/bootinfo.h>
-+
-+static struct list_head mips_machines __initdata =
-+ LIST_HEAD_INIT(mips_machines);
-+
-+unsigned char mips_machine_name[MIPS_MACHINE_NAME_LEN] = "Unknown";
-+
-+static struct mips_machine * __init mips_machine_find(unsigned long machtype)
-+{
-+ struct list_head *this;
-+
-+ list_for_each(this, &mips_machines) {
-+ struct mips_machine *mach;
-+
-+ mach = list_entry(this, struct mips_machine, list);
-+ if (mach->mach_type == machtype)
-+ return mach;
-+ }
-+
-+ return NULL;
-+}
-+
-+void __init mips_machine_register(struct mips_machine *mach)
-+{
-+ list_add_tail(&mach->list, &mips_machines);
-+}
-+
-+void __init mips_machine_setup(unsigned long machtype)
-+{
-+ struct mips_machine *mach;
-+
-+ mach = mips_machine_find(machtype);
-+ if (!mach) {
-+ printk(KERN_ALERT "MIPS: no machine registered for "
-+ "machtype %lu\n", machtype);
-+ return;
-+ }
-+
-+ if (mach->mach_name[0])
-+ strncpy(mips_machine_name, mach->mach_name,
-+ MIPS_MACHINE_NAME_LEN);
-+
-+ printk(KERN_INFO "MIPS: machine is %s\n", mips_machine_name);
-+
-+ if (mach->mach_setup)
-+ mach->mach_setup();
-+}
-+
---- a/arch/mips/kernel/Makefile
-+++ b/arch/mips/kernel/Makefile
-@@ -85,6 +85,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o
-
- obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-+obj-$(CONFIG_MIPS_MACHINE) += mips_machine.o
-
- CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -810,6 +810,9 @@ config MIPS_DISABLE_OBSOLETE_IDE
- config SYNC_R4K
- bool
-
-+config MIPS_MACHINE
-+ def_bool n
-+
- config NO_IOPORT
- def_bool n
-
---- a/arch/mips/kernel/proc.c
-+++ b/arch/mips/kernel/proc.c
-@@ -14,6 +14,7 @@
- #include <asm/cpu-features.h>
- #include <asm/mipsregs.h>
- #include <asm/processor.h>
-+#include <asm/mips_machine.h>
-
- unsigned int vced_count, vcei_count;
-
-@@ -33,8 +34,12 @@ static int show_cpuinfo(struct seq_file
- /*
- * For the first processor also print the system type
- */
-- if (n == 0)
-+ if (n == 0) {
- seq_printf(m, "system type\t\t: %s\n", get_system_type());
-+#ifdef CONFIG_MIPS_MACHINE
-+ seq_printf(m, "machine\t\t\t: %s\n", mips_machine_name);
-+#endif
-+ }
-
- seq_printf(m, "processor\t\t: %ld\n", n);
- sprintf(fmt, "cpu model\t\t: %%s V%%d.%%d%s\n",
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -812,6 +812,9 @@ config SYNC_R4K
-
- config MIPS_MACHINE
- def_bool n
-+
-+config PROM_EMU
-+ def_bool n
-
- config NO_IOPORT
- def_bool n
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -143,6 +143,15 @@ FEXPORT(__kernel_entry)
- j kernel_entry
- #endif
-
-+#ifdef CONFIG_PROM_EMU
-+EXPORT(prom_emu_argv)
-+ .word 0
-+ .word prom_emu_cmdline
-+ .ascii "CMDLINE:"
-+EXPORT(prom_emu_cmdline)
-+ .fill 0x400
-+#endif
-+
- __REF
-
- NESTED(kernel_entry, 16, sp) # kernel entry point
-@@ -183,6 +192,19 @@ NESTED(kernel_entry, 16, sp) # kernel
- LONG_S zero, (t0)
- bne t0, t1, 1b
-
-+#ifdef CONFIG_PROM_EMU
-+ PTR_LA t0, prom_emu_cmdline
-+ LONG_L t1, 0(t0)
-+ beqz t1, 1f
-+
-+ li a0, 2
-+ PTR_LA a1, prom_emu_argv
-+ move a2, zero
-+ move a3, zero
-+
-+1:
-+#endif /* CONFIG_PROM_EMU */
-+
- LONG_S a0, fw_arg0 # firmware arguments
- LONG_S a1, fw_arg1
- LONG_S a2, fw_arg2
+++ /dev/null
-From: Ralf Baechle <ralf@linux-mips.org>
-Date: Thu, 30 Apr 2009 16:14:56 +0000 (+0200)
-Subject: MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.
-X-Git-Url: http://www.linux-mips.org/git?p=linux.git;a=commitdiff_plain;h=a1b68289997030df64cba8478d5767fe10e42a58
-
-MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.
-
-The inline assembler used on 32-bit kernels was using the "h" constraint
-which was considered dangerous and removed for gcc 4.4.0.
-
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
-
-diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
-index d1d6991..dc5ea57 100644
---- a/arch/mips/include/asm/div64.h
-+++ b/arch/mips/include/asm/div64.h
-@@ -6,105 +6,63 @@
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
--#ifndef _ASM_DIV64_H
--#define _ASM_DIV64_H
-+#ifndef __ASM_DIV64_H
-+#define __ASM_DIV64_H
-
--#include <linux/types.h>
-+#include <asm-generic/div64.h>
-
--#if (_MIPS_SZLONG == 32)
-+#if BITS_PER_LONG == 64
-
--#include <asm/compiler.h>
-+#include <linux/types.h>
-
- /*
- * No traps on overflows for any of these...
- */
-
--#define do_div64_32(res, high, low, base) ({ \
-- unsigned long __quot32, __mod32; \
-- unsigned long __cf, __tmp, __tmp2, __i; \
-- \
-- __asm__(".set push\n\t" \
-- ".set noat\n\t" \
-- ".set noreorder\n\t" \
-- "move %2, $0\n\t" \
-- "move %3, $0\n\t" \
-- "b 1f\n\t" \
-- " li %4, 0x21\n" \
-- "0:\n\t" \
-- "sll $1, %0, 0x1\n\t" \
-- "srl %3, %0, 0x1f\n\t" \
-- "or %0, $1, %5\n\t" \
-- "sll %1, %1, 0x1\n\t" \
-- "sll %2, %2, 0x1\n" \
-- "1:\n\t" \
-- "bnez %3, 2f\n\t" \
-- " sltu %5, %0, %z6\n\t" \
-- "bnez %5, 3f\n" \
-- "2:\n\t" \
-- " addiu %4, %4, -1\n\t" \
-- "subu %0, %0, %z6\n\t" \
-- "addiu %2, %2, 1\n" \
-- "3:\n\t" \
-- "bnez %4, 0b\n\t" \
-- " srl %5, %1, 0x1f\n\t" \
-- ".set pop" \
-- : "=&r" (__mod32), "=&r" (__tmp), \
-- "=&r" (__quot32), "=&r" (__cf), \
-- "=&r" (__i), "=&r" (__tmp2) \
-- : "Jr" (base), "0" (high), "1" (low)); \
-- \
-- (res) = __quot32; \
-- __mod32; })
--
--#define do_div(n, base) ({ \
-- unsigned long long __quot; \
-- unsigned long __mod; \
-- unsigned long long __div; \
-- unsigned long __upper, __low, __high, __base; \
-- \
-- __div = (n); \
-- __base = (base); \
-- \
-- __high = __div >> 32; \
-- __low = __div; \
-- __upper = __high; \
-- \
-- if (__high) \
-- __asm__("divu $0, %z2, %z3" \
-- : "=h" (__upper), "=l" (__high) \
-- : "Jr" (__high), "Jr" (__base) \
-- : GCC_REG_ACCUM); \
-- \
-- __mod = do_div64_32(__low, __upper, __low, __base); \
-- \
-- __quot = __high; \
-- __quot = __quot << 32 | __low; \
-- (n) = __quot; \
-- __mod; })
--
--#endif /* (_MIPS_SZLONG == 32) */
--
--#if (_MIPS_SZLONG == 64)
--
--/*
-- * Hey, we're already 64-bit, no
-- * need to play games..
-- */
--#define do_div(n, base) ({ \
-- unsigned long __quot; \
-- unsigned int __mod; \
-- unsigned long __div; \
-- unsigned int __base; \
-- \
-- __div = (n); \
-- __base = (base); \
-- \
-- __mod = __div % __base; \
-- __quot = __div / __base; \
-- \
-- (n) = __quot; \
-- __mod; })
-+#define __div64_32(n, base) \
-+({ \
-+ unsigned long __cf, __tmp, __tmp2, __i; \
-+ unsigned long __quot32, __mod32; \
-+ unsigned long __high, __low; \
-+ unsigned long long __n; \
-+ \
-+ __high = *__n >> 32; \
-+ __low = __n; \
-+ __asm__( \
-+ " .set push \n" \
-+ " .set noat \n" \
-+ " .set noreorder \n" \
-+ " move %2, $0 \n" \
-+ " move %3, $0 \n" \
-+ " b 1f \n" \
-+ " li %4, 0x21 \n" \
-+ "0: \n" \
-+ " sll $1, %0, 0x1 \n" \
-+ " srl %3, %0, 0x1f \n" \
-+ " or %0, $1, %5 \n" \
-+ " sll %1, %1, 0x1 \n" \
-+ " sll %2, %2, 0x1 \n" \
-+ "1: \n" \
-+ " bnez %3, 2f \n" \
-+ " sltu %5, %0, %z6 \n" \
-+ " bnez %5, 3f \n" \
-+ "2: \n" \
-+ " addiu %4, %4, -1 \n" \
-+ " subu %0, %0, %z6 \n" \
-+ " addiu %2, %2, 1 \n" \
-+ "3: \n" \
-+ " bnez %4, 0b\n\t" \
-+ " srl %5, %1, 0x1f\n\t" \
-+ " .set pop" \
-+ : "=&r" (__mod32), "=&r" (__tmp), \
-+ "=&r" (__quot32), "=&r" (__cf), \
-+ "=&r" (__i), "=&r" (__tmp2) \
-+ : "Jr" (base), "0" (__high), "1" (__low)); \
-+ \
-+ (__n) = __quot32; \
-+ __mod32; \
-+})
-
--#endif /* (_MIPS_SZLONG == 64) */
-+#endif /* BITS_PER_LONG == 64 */
-
--#endif /* _ASM_DIV64_H */
-+#endif /* __ASM_DIV64_H */
+++ /dev/null
-When init is started it is SIGNAL_UNKILLABLE. If it were to get an
-address error, we would try to send it SIGBUS, but it would be ignored
-and the faulting instruction restarted. This results in an endless
-loop.
-
-We need to use force_sig() instead so it will actually die and give us
-some useful information.
-
-Reported-by: Florian Fainelli <florian@openwrt.org>
-
-Signed-off-by: David Daney <ddaney@caviumnetworks.com>
----
- arch/mips/kernel/unaligned.c | 6 +++---
- 1 files changed, 3 insertions(+), 3 deletions(-)
-
---- a/arch/mips/kernel/unaligned.c
-+++ b/arch/mips/kernel/unaligned.c
-@@ -482,19 +482,19 @@ fault:
- return;
-
- die_if_kernel("Unhandled kernel unaligned access", regs);
-- send_sig(SIGSEGV, current, 1);
-+ force_sig(SIGSEGV, current);
-
- return;
-
- sigbus:
- die_if_kernel("Unhandled kernel unaligned access", regs);
-- send_sig(SIGBUS, current, 1);
-+ force_sig(SIGBUS, current);
-
- return;
-
- sigill:
- die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
-- send_sig(SIGILL, current, 1);
-+ force_sig(SIGILL, current);
- }
-
- asmlinkage void do_ade(struct pt_regs *regs)
+++ /dev/null
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -14,6 +14,7 @@
- #include <linux/list.h>
- #include <linux/init.h>
- #include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
- #include <linux/buffer_head.h>
- #include <linux/mutex.h>
- #include <linux/mount.h>
-@@ -232,10 +233,11 @@ static void block2mtd_free_device(struct
-
-
- /* FIXME: ensure that mtd->size % erase_size == 0 */
--static struct block2mtd_dev *add_device(char *devname, int erase_size)
-+static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
- {
- struct block_device *bdev;
- struct block2mtd_dev *dev;
-+ struct mtd_partition *part;
- char *name;
-
- if (!devname)
-@@ -273,17 +275,17 @@ static struct block2mtd_dev *add_device(
-
- mutex_init(&dev->write_mutex);
-
-- /* Setup the MTD structure */
-- /* make the name contain the block device in */
-- name = kmalloc(sizeof("block2mtd: ") + strlen(devname) + 1,
-- GFP_KERNEL);
-+ if (!mtdname)
-+ mtdname = devname;
-+
-+ name = kmalloc(strlen(mtdname) + 1, GFP_KERNEL);
- if (!name)
- goto devinit_err;
-
-- sprintf(name, "block2mtd: %s", devname);
-+ strcpy(name, mtdname);
- dev->mtd.name = name;
-
-- dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK;
-+ dev->mtd.size = dev->blkdev->bd_inode->i_size & PAGE_MASK & ~(erase_size - 1);
- dev->mtd.erasesize = erase_size;
- dev->mtd.writesize = 1;
- dev->mtd.type = MTD_RAM;
-@@ -296,14 +298,17 @@ static struct block2mtd_dev *add_device(
- dev->mtd.priv = dev;
- dev->mtd.owner = THIS_MODULE;
-
-- if (add_mtd_device(&dev->mtd)) {
-+ part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
-+ part->name = dev->mtd.name;
-+ part->offset = 0;
-+ part->size = dev->mtd.size;
-+ if (add_mtd_partitions(&dev->mtd, part, 1)) {
- /* Device didnt get added, so free the entry */
- goto devinit_err;
- }
- list_add(&dev->list, &blkmtd_device_list);
- INFO("mtd%d: [%s] erase_size = %dKiB [%d]", dev->mtd.index,
-- dev->mtd.name + strlen("block2mtd: "),
-- dev->mtd.erasesize >> 10, dev->mtd.erasesize);
-+ mtdname, dev->mtd.erasesize >> 10, dev->mtd.erasesize);
- return dev;
-
- devinit_err:
-@@ -376,9 +381,9 @@ static char block2mtd_paramline[80 + 12]
-
- static int block2mtd_setup2(const char *val)
- {
-- char buf[80 + 12]; /* 80 for device, 12 for erase size */
-+ char buf[80 + 12 + 80]; /* 80 for device, 12 for erase size, 80 for name */
- char *str = buf;
-- char *token[2];
-+ char *token[3];
- char *name;
- size_t erase_size = PAGE_SIZE;
- int i, ret;
-@@ -389,7 +394,7 @@ static int block2mtd_setup2(const char *
- strcpy(str, val);
- kill_final_newline(str);
-
-- for (i = 0; i < 2; i++)
-+ for (i = 0; i < 3; i++)
- token[i] = strsep(&str, ",");
-
- if (str)
-@@ -408,8 +413,10 @@ static int block2mtd_setup2(const char *
- parse_err("illegal erase size");
- }
- }
-+ if (token[2] && (strlen(token[2]) + 1 > 80))
-+ parse_err("mtd device name too long");
-
-- add_device(name, erase_size);
-+ add_device(name, erase_size, token[2]);
-
- return 0;
- }
-@@ -443,7 +450,7 @@ static int block2mtd_setup(const char *v
-
-
- module_param_call(block2mtd, block2mtd_setup, NULL, NULL, 0200);
--MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>]\"");
-+MODULE_PARM_DESC(block2mtd, "Device to use. \"block2mtd=<dev>[,<erasesize>[,<name>]]\"");
-
- static int __init block2mtd_init(void)
- {
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -53,6 +53,16 @@ config MTD_TESTS
- should normally be compiled as kernel modules. The modules perform
- various checks and verifications when loaded.
-
-+config MTD_ROOTFS_ROOT_DEV
-+ bool "Automatically set 'rootfs' partition to be root filesystem"
-+ depends on MTD_PARTITIONS
-+ default y
-+
-+config MTD_ROOTFS_SPLIT
-+ bool "Automatically split 'rootfs' partition for squashfs"
-+ depends on MTD_PARTITIONS
-+ default y
-+
- config MTD_REDBOOT_PARTS
- tristate "RedBoot partition table parsing"
- depends on MTD_PARTITIONS
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -18,6 +18,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/compatmac.h>
-+#include <linux/root_dev.h>
-+#include <linux/magic.h>
-
- /* Our partition linked list */
- static LIST_HEAD(mtd_partitions);
-@@ -37,7 +39,7 @@ struct mtd_part {
- * the pointer to that structure with this macro.
- */
- #define PART(x) ((struct mtd_part *)(x))
--
-+#define IS_PART(mtd) (mtd->read == part_read)
-
- /*
- * MTD methods which simply translate the effective address and pass through
-@@ -489,6 +491,156 @@ out_register:
- return slave;
- }
-
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+#define ROOTFS_SPLIT_NAME "rootfs_data"
-+#define ROOTFS_REMOVED_NAME "<removed>"
-+
-+struct squashfs_super_block {
-+ __le32 s_magic;
-+ __le32 pad0[9];
-+ __le64 bytes_used;
-+};
-+
-+
-+static int split_squashfs(struct mtd_info *master, int offset, int *split_offset)
-+{
-+ char buf[512];
-+ struct squashfs_super_block *sb = (struct squashfs_super_block *) buf;
-+ int len, ret;
-+
-+ ret = master->read(master, offset, sizeof(*sb), &len, buf);
-+ if (ret || (len != sizeof(*sb))) {
-+ printk(KERN_ALERT "split_squashfs: error occured while reading "
-+ "from \"%s\"\n", master->name);
-+ return -EINVAL;
-+ }
-+
-+ if (*((u32 *) buf) != SQUASHFS_MAGIC) {
-+ printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
-+ master->name);
-+ *split_offset = 0;
-+ return 0;
-+ }
-+
-+ if (sb->bytes_used <= 0) {
-+ printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
-+ master->name);
-+ *split_offset = 0;
-+ return 0;
-+ }
-+
-+ len = (u32) sb->bytes_used;
-+ len += (offset & 0x000fffff);
-+ len += (master->erasesize - 1);
-+ len &= ~(master->erasesize - 1);
-+ len -= (offset & 0x000fffff);
-+ *split_offset = offset + len;
-+
-+ return 0;
-+}
-+
-+static int split_rootfs_data(struct mtd_info *master, struct mtd_info *rpart, const struct mtd_partition *part,
-+ int index)
-+{
-+ struct mtd_partition *dpart;
-+ struct mtd_part *slave = NULL;
-+ int split_offset = 0;
-+ int ret;
-+
-+ ret = split_squashfs(master, part->offset, &split_offset);
-+ if (ret)
-+ return ret;
-+
-+ if (split_offset <= 0)
-+ return 0;
-+
-+ dpart = kmalloc(sizeof(*part)+sizeof(ROOTFS_SPLIT_NAME)+1, GFP_KERNEL);
-+ if (dpart == NULL) {
-+ printk(KERN_INFO "split_squashfs: no memory for partition \"%s\"\n",
-+ ROOTFS_SPLIT_NAME);
-+ return -ENOMEM;
-+ }
-+
-+ memcpy(dpart, part, sizeof(*part));
-+ dpart->name = (unsigned char *)&dpart[1];
-+ strcpy(dpart->name, ROOTFS_SPLIT_NAME);
-+
-+ dpart->size -= split_offset - dpart->offset;
-+ dpart->offset = split_offset;
-+
-+ if (dpart == NULL)
-+ return 1;
-+
-+ printk(KERN_INFO "mtd: partition \"%s\" created automatically, ofs=%llX, len=%llX \n",
-+ ROOTFS_SPLIT_NAME, dpart->offset, dpart->size);
-+
-+ slave = add_one_partition(master, dpart, index, split_offset);
-+ if (!slave) {
-+ kfree(dpart);
-+ return -ENOMEM;
-+ }
-+ rpart->split = &slave->mtd;
-+
-+ return 0;
-+}
-+
-+static int refresh_rootfs_split(struct mtd_info *mtd)
-+{
-+ struct mtd_partition tpart;
-+ struct mtd_part *part;
-+ char *name;
-+ int index = 0;
-+ int offset, size;
-+ int ret;
-+
-+ part = PART(mtd);
-+
-+ /* check for the new squashfs offset first */
-+ ret = split_squashfs(part->master, part->offset, &offset);
-+ if (ret)
-+ return ret;
-+
-+ if ((offset > 0) && !mtd->split) {
-+ printk(KERN_INFO "%s: creating new split partition for \"%s\"\n", __func__, mtd->name);
-+ /* if we don't have a rootfs split partition, create a new one */
-+ tpart.name = (char *) mtd->name;
-+ tpart.size = mtd->size;
-+ tpart.offset = part->offset;
-+
-+ /* find the index of the last partition */
-+ if (!list_empty(&mtd_partitions))
-+ index = list_first_entry(&mtd_partitions, struct mtd_part, list)->index + 1;
-+
-+ return split_rootfs_data(part->master, &part->mtd, &tpart, index);
-+ } else if ((offset > 0) && mtd->split) {
-+ /* update the offsets of the existing partition */
-+ size = mtd->size + part->offset - offset;
-+
-+ part = PART(mtd->split);
-+ part->offset = offset;
-+ part->mtd.size = size;
-+ printk(KERN_INFO "%s: %s partition \"" ROOTFS_SPLIT_NAME "\", offset: 0x%06x (0x%06x)\n",
-+ __func__, (!strcmp(part->mtd.name, ROOTFS_SPLIT_NAME) ? "updating" : "creating"),
-+ (u32) part->offset, (u32) part->mtd.size);
-+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+ strcpy(name, ROOTFS_SPLIT_NAME);
-+ part->mtd.name = name;
-+ } else if ((offset <= 0) && mtd->split) {
-+ printk(KERN_INFO "%s: removing partition \"%s\"\n", __func__, mtd->split->name);
-+
-+ /* mark existing partition as removed */
-+ part = PART(mtd->split);
-+ name = kmalloc(sizeof(ROOTFS_SPLIT_NAME) + 1, GFP_KERNEL);
-+ strcpy(name, ROOTFS_REMOVED_NAME);
-+ part->mtd.name = name;
-+ part->offset = 0;
-+ part->mtd.size = 0;
-+ }
-+
-+ return 0;
-+}
-+#endif /* CONFIG_MTD_ROOTFS_SPLIT */
-+
- /*
- * This function, given a master MTD object and a partition table, creates
- * and registers slave MTD objects which are bound to the master according to
-@@ -502,14 +654,29 @@ int add_mtd_partitions(struct mtd_info *
- {
- struct mtd_part *slave;
- uint64_t cur_offset = 0;
-- int i;
-+ int i, j, ret;
-
- printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
-
-- for (i = 0; i < nbparts; i++) {
-- slave = add_one_partition(master, parts + i, i, cur_offset);
-+ for (i = 0, j = 0; i < nbparts; i++) {
-+ slave = add_one_partition(master, parts + i, j++, cur_offset);
- if (!slave)
- return -ENOMEM;
-+
-+ if (!strcmp(parts[i].name, "rootfs") && slave->registered) {
-+#ifdef CONFIG_MTD_ROOTFS_ROOT_DEV
-+ if (ROOT_DEV == 0) {
-+ printk(KERN_NOTICE "mtd: partition \"rootfs\" "
-+ "set to be root filesystem\n");
-+ ROOT_DEV = MKDEV(MTD_BLOCK_MAJOR, slave->mtd.index);
-+ }
-+#endif
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+ ret = split_rootfs_data(master, &slave->mtd, &parts[i], j);
-+ if (ret == 0)
-+ j++;
-+#endif
-+ }
- cur_offset = slave->offset + slave->mtd.size;
- }
-
-@@ -517,6 +684,32 @@ int add_mtd_partitions(struct mtd_info *
- }
- EXPORT_SYMBOL(add_mtd_partitions);
-
-+int refresh_mtd_partitions(struct mtd_info *mtd)
-+{
-+ int ret = 0;
-+
-+ if (IS_PART(mtd)) {
-+ struct mtd_part *part;
-+ struct mtd_info *master;
-+
-+ part = PART(mtd);
-+ master = part->master;
-+ if (master->refresh_device)
-+ ret = master->refresh_device(master);
-+ }
-+
-+ if (!ret && mtd->refresh_device)
-+ ret = mtd->refresh_device(mtd);
-+
-+#ifdef CONFIG_MTD_ROOTFS_SPLIT
-+ if (!ret && IS_PART(mtd) && !strcmp(mtd->name, "rootfs"))
-+ refresh_rootfs_split(mtd);
-+#endif
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL_GPL(refresh_mtd_partitions);
-+
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
-
---- a/drivers/mtd/devices/block2mtd.c
-+++ b/drivers/mtd/devices/block2mtd.c
-@@ -29,6 +29,8 @@ struct block2mtd_dev {
- struct block_device *blkdev;
- struct mtd_info mtd;
- struct mutex write_mutex;
-+ rwlock_t bdev_mutex;
-+ char devname[0];
- };
-
-
-@@ -81,6 +83,12 @@ static int block2mtd_erase(struct mtd_in
- size_t len = instr->len;
- int err;
-
-+ read_lock(&dev->bdev_mutex);
-+ if (!dev->blkdev) {
-+ err = -EINVAL;
-+ goto done;
-+ }
-+
- instr->state = MTD_ERASING;
- mutex_lock(&dev->write_mutex);
- err = _block2mtd_erase(dev, from, len);
-@@ -93,6 +101,10 @@ static int block2mtd_erase(struct mtd_in
-
- instr->state = MTD_ERASE_DONE;
- mtd_erase_callback(instr);
-+
-+done:
-+ read_unlock(&dev->bdev_mutex);
-+
- return err;
- }
-
-@@ -104,10 +116,14 @@ static int block2mtd_read(struct mtd_inf
- struct page *page;
- int index = from >> PAGE_SHIFT;
- int offset = from & (PAGE_SIZE-1);
-- int cpylen;
-+ int cpylen, err = 0;
-+
-+ read_lock(&dev->bdev_mutex);
-+ if (!dev->blkdev || (from > mtd->size)) {
-+ err = -EINVAL;
-+ goto done;
-+ }
-
-- if (from > mtd->size)
-- return -EINVAL;
- if (from + len > mtd->size)
- len = mtd->size - from;
-
-@@ -122,10 +138,14 @@ static int block2mtd_read(struct mtd_inf
- len = len - cpylen;
-
- page = page_read(dev->blkdev->bd_inode->i_mapping, index);
-- if (!page)
-- return -ENOMEM;
-- if (IS_ERR(page))
-- return PTR_ERR(page);
-+ if (!page) {
-+ err = -ENOMEM;
-+ goto done;
-+ }
-+ if (IS_ERR(page)) {
-+ err = PTR_ERR(page);
-+ goto done;
-+ }
-
- memcpy(buf, page_address(page) + offset, cpylen);
- page_cache_release(page);
-@@ -136,7 +156,10 @@ static int block2mtd_read(struct mtd_inf
- offset = 0;
- index++;
- }
-- return 0;
-+
-+done:
-+ read_unlock(&dev->bdev_mutex);
-+ return err;
- }
-
-
-@@ -188,12 +211,22 @@ static int block2mtd_write(struct mtd_in
- size_t *retlen, const u_char *buf)
- {
- struct block2mtd_dev *dev = mtd->priv;
-- int err;
-+ int err = 0;
-+
-+ read_lock(&dev->bdev_mutex);
-+ if (!dev->blkdev) {
-+ err = -EINVAL;
-+ goto done;
-+ }
-
- if (!len)
-- return 0;
-- if (to >= mtd->size)
-- return -ENOSPC;
-+ goto done;
-+
-+ if (to >= mtd->size) {
-+ err = -ENOSPC;
-+ goto done;
-+ }
-+
- if (to + len > mtd->size)
- len = mtd->size - to;
-
-@@ -202,6 +235,9 @@ static int block2mtd_write(struct mtd_in
- mutex_unlock(&dev->write_mutex);
- if (err > 0)
- err = 0;
-+
-+done:
-+ read_unlock(&dev->bdev_mutex);
- return err;
- }
-
-@@ -210,52 +246,29 @@ static int block2mtd_write(struct mtd_in
- static void block2mtd_sync(struct mtd_info *mtd)
- {
- struct block2mtd_dev *dev = mtd->priv;
-- sync_blockdev(dev->blkdev);
-- return;
--}
--
--
--static void block2mtd_free_device(struct block2mtd_dev *dev)
--{
-- if (!dev)
-- return;
--
-- kfree(dev->mtd.name);
-
-- if (dev->blkdev) {
-- invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping,
-- 0, -1);
-- close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
-- }
-+ read_lock(&dev->bdev_mutex);
-+ if (dev->blkdev)
-+ sync_blockdev(dev->blkdev);
-+ read_unlock(&dev->bdev_mutex);
-
-- kfree(dev);
-+ return;
- }
-
-
--/* FIXME: ensure that mtd->size % erase_size == 0 */
--static struct block2mtd_dev *add_device(char *devname, int erase_size, const char *mtdname)
-+static int _open_bdev(struct block2mtd_dev *dev)
- {
- struct block_device *bdev;
-- struct block2mtd_dev *dev;
-- struct mtd_partition *part;
-- char *name;
--
-- if (!devname)
-- return NULL;
--
-- dev = kzalloc(sizeof(struct block2mtd_dev), GFP_KERNEL);
-- if (!dev)
-- return NULL;
-
- /* Get a handle on the device */
-- bdev = open_bdev_exclusive(devname, FMODE_READ|FMODE_WRITE, NULL);
-+ bdev = open_bdev_exclusive(dev->devname, FMODE_READ|FMODE_WRITE, NULL);
- #ifndef MODULE
- if (IS_ERR(bdev)) {
-
- /* We might not have rootfs mounted at this point. Try
- to resolve the device name by other means. */
-
-- dev_t devt = name_to_dev_t(devname);
-+ dev_t devt = name_to_dev_t(dev->devname);
- if (devt) {
- bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
- }
-@@ -263,17 +276,97 @@ static struct block2mtd_dev *add_device(
- #endif
-
- if (IS_ERR(bdev)) {
-- ERROR("error: cannot open device %s", devname);
-- goto devinit_err;
-+ ERROR("error: cannot open device %s", dev->devname);
-+ return 1;
- }
- dev->blkdev = bdev;
-
- if (MAJOR(bdev->bd_dev) == MTD_BLOCK_MAJOR) {
- ERROR("attempting to use an MTD device as a block device");
-- goto devinit_err;
-+ return 1;
- }
-
-+ return 0;
-+}
-+
-+static void _close_bdev(struct block2mtd_dev *dev)
-+{
-+ struct block_device *bdev;
-+
-+ if (!dev->blkdev)
-+ return;
-+
-+ bdev = dev->blkdev;
-+ invalidate_mapping_pages(dev->blkdev->bd_inode->i_mapping, 0, -1);
-+ close_bdev_exclusive(dev->blkdev, FMODE_READ|FMODE_WRITE);
-+ dev->blkdev = NULL;
-+}
-+
-+static void block2mtd_free_device(struct block2mtd_dev *dev)
-+{
-+ if (!dev)
-+ return;
-+
-+ kfree(dev->mtd.name);
-+ _close_bdev(dev);
-+ kfree(dev);
-+}
-+
-+
-+static int block2mtd_refresh(struct mtd_info *mtd)
-+{
-+ struct block2mtd_dev *dev = mtd->priv;
-+ struct block_device *bdev;
-+ dev_t devt;
-+ int err = 0;
-+
-+ /* no other mtd function can run at this point */
-+ write_lock(&dev->bdev_mutex);
-+
-+ /* get the device number for the whole disk */
-+ devt = MKDEV(MAJOR(dev->blkdev->bd_dev), 0);
-+
-+ /* close the old block device */
-+ _close_bdev(dev);
-+
-+ /* open the whole disk, issue a partition rescan, then */
-+ bdev = open_by_devnum(devt, FMODE_WRITE | FMODE_READ);
-+ if (!bdev || !bdev->bd_disk)
-+ err = -EINVAL;
-+ else {
-+ err = rescan_partitions(bdev->bd_disk, bdev);
-+ }
-+ if (bdev)
-+ close_bdev_exclusive(bdev, FMODE_READ|FMODE_WRITE);
-+
-+ /* try to open the partition block device again */
-+ _open_bdev(dev);
-+ write_unlock(&dev->bdev_mutex);
-+
-+ return err;
-+}
-+
-+/* FIXME: ensure that mtd->size % erase_size == 0 */
-+static struct block2mtd_dev *add_device(char *devname, int erase_size, char *mtdname)
-+{
-+ struct block2mtd_dev *dev;
-+ struct mtd_partition *part;
-+ char *name;
-+
-+ if (!devname)
-+ return NULL;
-+
-+ dev = kzalloc(sizeof(struct block2mtd_dev) + strlen(devname) + 1, GFP_KERNEL);
-+ if (!dev)
-+ return NULL;
-+
-+ strcpy(dev->devname, devname);
-+
-+ if (_open_bdev(dev))
-+ goto devinit_err;
-+
- mutex_init(&dev->write_mutex);
-+ rwlock_init(&dev->bdev_mutex);
-
- if (!mtdname)
- mtdname = devname;
-@@ -297,6 +390,7 @@ static struct block2mtd_dev *add_device(
- dev->mtd.read = block2mtd_read;
- dev->mtd.priv = dev;
- dev->mtd.owner = THIS_MODULE;
-+ dev->mtd.refresh_device = block2mtd_refresh;
-
- part = kzalloc(sizeof(struct mtd_partition), GFP_KERNEL);
- part->name = dev->mtd.name;
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -16,6 +16,7 @@
-
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/compatmac.h>
-+#include <linux/mtd/partitions.h>
-
- #include <asm/uaccess.h>
-
-@@ -773,6 +774,13 @@ static int mtd_ioctl(struct inode *inode
- file->f_pos = 0;
- break;
- }
-+#ifdef CONFIG_MTD_PARTITIONS
-+ case MTDREFRESH:
-+ {
-+ ret = refresh_mtd_partitions(mtd);
-+ break;
-+ }
-+#endif
-
- default:
- ret = -ENOTTY;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -100,6 +100,7 @@ struct mtd_oob_ops {
- uint8_t *oobbuf;
- };
-
-+struct mtd_info;
- struct mtd_info {
- u_char type;
- uint32_t flags;
-@@ -225,6 +226,9 @@ struct mtd_info {
- struct module *owner;
- int usecount;
-
-+ int (*refresh_device)(struct mtd_info *mtd);
-+ struct mtd_info *split;
-+
- /* If the driver is something smart, like UBI, it may need to maintain
- * its own reference counting. The below functions are only for driver.
- * The driver may register its callbacks. These callbacks are not
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -34,6 +34,7 @@
- * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK).
- */
-
-+struct mtd_partition;
- struct mtd_partition {
- char *name; /* identifier string */
- uint64_t size; /* partition size */
-@@ -41,6 +42,7 @@ struct mtd_partition {
- uint32_t mask_flags; /* master MTD flags to mask out for this partition */
- struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/
- struct mtd_info **mtdp; /* pointer to store the MTD object */
-+ int (*refresh_partition)(struct mtd_info *);
- };
-
- #define MTDPART_OFS_NXTBLK (-2)
-@@ -50,6 +52,7 @@ struct mtd_partition {
-
- int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
- int del_mtd_partitions(struct mtd_info *);
-+int refresh_mtd_partitions(struct mtd_info *);
-
- /*
- * Functions dealing with the various ways of partitioning the space
---- a/include/mtd/mtd-abi.h
-+++ b/include/mtd/mtd-abi.h
-@@ -93,6 +93,7 @@ struct otp_info {
- #define ECCGETLAYOUT _IOR('M', 17, struct nand_ecclayout)
- #define ECCGETSTATS _IOR('M', 18, struct mtd_ecc_stats)
- #define MTDFILEMODE _IO('M', 19)
-+#define MTDREFRESH _IO('M', 23)
-
- /*
- * Obsolete legacy interface. Keep it in order not to break userspace
+++ /dev/null
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -515,21 +515,21 @@ static int split_squashfs(struct mtd_inf
- return -EINVAL;
- }
-
-- if (*((u32 *) buf) != SQUASHFS_MAGIC) {
-+ if (SQUASHFS_MAGIC != le32_to_cpu(sb->s_magic) ) {
- printk(KERN_ALERT "split_squashfs: no squashfs found in \"%s\"\n",
- master->name);
- *split_offset = 0;
- return 0;
- }
-
-- if (sb->bytes_used <= 0) {
-+ if (le64_to_cpu((sb->bytes_used)) <= 0) {
- printk(KERN_ALERT "split_squashfs: squashfs is empty in \"%s\"\n",
- master->name);
- *split_offset = 0;
- return 0;
- }
-
-- len = (u32) sb->bytes_used;
-+ len = (u32) le64_to_cpu(sb->bytes_used);
- len += (offset & 0x000fffff);
- len += (master->erasesize - 1);
- len &= ~(master->erasesize - 1);
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -249,14 +249,21 @@ static int parse_redboot_partitions(stru
- #endif
- names += strlen(names)+1;
-
--#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- if(fl->next && fl->img->flash_base + fl->img->size + master->erasesize <= fl->next->img->flash_base) {
-- i++;
-- parts[i].offset = parts[i-1].size + parts[i-1].offset;
-- parts[i].size = fl->next->img->flash_base - parts[i].offset;
-- parts[i].name = nullname;
-- }
-+ if (!strcmp(parts[i].name, "rootfs")) {
-+ parts[i].size = fl->next->img->flash_base;
-+ parts[i].size &= ~(master->erasesize - 1);
-+ parts[i].size -= parts[i].offset;
-+#ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-+ nrparts--;
-+ } else {
-+ i++;
-+ parts[i].offset = parts[i-1].size + parts[i-1].offset;
-+ parts[i].size = fl->next->img->flash_base - parts[i].offset;
-+ parts[i].name = nullname;
- #endif
-+ }
-+ }
- tmp_fl = fl;
- fl = fl->next;
- kfree(tmp_fl);
+++ /dev/null
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -11,6 +11,8 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-
-+#define BOARD_CONFIG_PART "boardconfig"
-+
- struct fis_image_desc {
- unsigned char name[16]; // Null terminated name
- uint32_t flash_base; // Address within FLASH of image
-@@ -41,6 +43,7 @@ static int parse_redboot_partitions(stru
- struct mtd_partition **pparts,
- unsigned long fis_origin)
- {
-+ unsigned long max_offset = 0;
- int nrparts = 0;
- struct fis_image_desc *buf;
- struct mtd_partition *parts;
-@@ -209,14 +212,14 @@ static int parse_redboot_partitions(stru
- }
- }
- #endif
-- parts = kzalloc(sizeof(*parts)*nrparts + nulllen + namelen, GFP_KERNEL);
-+ parts = kzalloc(sizeof(*parts) * (nrparts + 1) + nulllen + namelen + sizeof(BOARD_CONFIG_PART), GFP_KERNEL);
-
- if (!parts) {
- ret = -ENOMEM;
- goto out;
- }
-
-- nullname = (char *)&parts[nrparts];
-+ nullname = (char *)&parts[nrparts + 1];
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- if (nulllen > 0) {
- strcpy(nullname, nullstring);
-@@ -235,6 +238,8 @@ static int parse_redboot_partitions(stru
- }
- #endif
- for ( ; i<nrparts; i++) {
-+ if(max_offset < buf[i].flash_base + buf[i].size)
-+ max_offset = buf[i].flash_base + buf[i].size;
- parts[i].size = fl->img->size;
- parts[i].offset = fl->img->flash_base;
- parts[i].name = names;
-@@ -268,6 +273,14 @@ static int parse_redboot_partitions(stru
- fl = fl->next;
- kfree(tmp_fl);
- }
-+ if(master->size - max_offset >= master->erasesize)
-+ {
-+ parts[nrparts].size = master->size - max_offset;
-+ parts[nrparts].offset = max_offset;
-+ parts[nrparts].name = names;
-+ strcpy(names, BOARD_CONFIG_PART);
-+ nrparts++;
-+ }
- ret = nrparts;
- *pparts = parts;
- out:
+++ /dev/null
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -574,6 +574,7 @@ struct platform_nand_chip {
- int chip_delay;
- unsigned int options;
- const char **part_probe_types;
-+ int (*chip_fixup)(struct mtd_info *mtd);
- void *priv;
- };
-
---- a/drivers/mtd/nand/plat_nand.c
-+++ b/drivers/mtd/nand/plat_nand.c
-@@ -71,7 +71,18 @@ static int __init plat_nand_probe(struct
- platform_set_drvdata(pdev, data);
-
- /* Scan to find existance of the device */
-- if (nand_scan(&data->mtd, 1)) {
-+ if (nand_scan_ident(&data->mtd, 1)) {
-+ res = -ENXIO;
-+ goto out;
-+ }
-+
-+ if (pdata->chip.chip_fixup) {
-+ res = pdata->chip.chip_fixup(&data->mtd);
-+ if (res)
-+ goto out;
-+ }
-+
-+ if (nand_scan_tail(&data->mtd)) {
- res = -ENXIO;
- goto out;
- }
+++ /dev/null
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -180,6 +180,22 @@ config MTD_AR7_PARTS
- ---help---
- TI AR7 partitioning support
-
-+config MTD_MYLOADER_PARTS
-+ tristate "MyLoader partition parsing"
-+ depends on MTD_PARTITIONS && (ADM5120 || ATHEROS || ATHEROS_AR71XX)
-+ ---help---
-+ MyLoader is a bootloader which allows the user to define partitions
-+ in flash devices, by putting a table in the second erase block
-+ on the device, similar to a partition table. This table gives the
-+ offsets and lengths of the user defined partitions.
-+
-+ If you need code which can detect and parse these tables, and
-+ register MTD 'partitions' corresponding to each image detected,
-+ enable this option.
-+
-+ You will still need the parsing functions to be called by the driver
-+ for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
-
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -13,6 +13,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdli
- obj-$(CONFIG_MTD_AFS_PARTS) += afs.o
- obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_OF_PARTS) += ofpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR) += mtdchar.o
+++ /dev/null
---- a/drivers/mtd/myloader.c
-+++ b/drivers/mtd/myloader.c
-@@ -19,7 +19,7 @@
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
--#include <linux/byteorder/generic.h>
-+#include <linux/byteorder.h>
- #include <linux/myloader.h>
-
- #define BLOCK_LEN_MIN 0x10000
+++ /dev/null
---- a/drivers/mtd/nand/nand_ecc.c
-+++ b/drivers/mtd/nand/nand_ecc.c
-@@ -492,8 +492,7 @@ int nand_correct_data(struct mtd_info *m
- if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
-
-- printk(KERN_ERR "uncorrectable error : ");
-- return -1;
-+ return -EBADMSG;
- }
- EXPORT_SYMBOL(nand_correct_data);
-
+++ /dev/null
---- /dev/null
-+++ b/include/linux/netfilter/xt_layer7.h
-@@ -0,0 +1,13 @@
-+#ifndef _XT_LAYER7_H
-+#define _XT_LAYER7_H
-+
-+#define MAX_PATTERN_LEN 8192
-+#define MAX_PROTOCOL_LEN 256
-+
-+struct xt_layer7_info {
-+ char protocol[MAX_PROTOCOL_LEN];
-+ char pattern[MAX_PATTERN_LEN];
-+ u_int8_t invert;
-+};
-+
-+#endif /* _XT_LAYER7_H */
---- a/include/net/netfilter/nf_conntrack.h
-+++ b/include/net/netfilter/nf_conntrack.h
-@@ -118,6 +118,22 @@ struct nf_conn
- u_int32_t secmark;
- #endif
-
-+#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || \
-+ defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
-+ struct {
-+ /*
-+ * e.g. "http". NULL before decision. "unknown" after decision
-+ * if no match.
-+ */
-+ char *app_proto;
-+ /*
-+ * application layer data so far. NULL after match decision.
-+ */
-+ char *app_data;
-+ unsigned int app_data_len;
-+ } layer7;
-+#endif
-+
- /* Storage reserved for other modules: */
- union nf_conntrack_proto proto;
-
---- a/net/netfilter/Kconfig
-+++ b/net/netfilter/Kconfig
-@@ -794,6 +794,27 @@ config NETFILTER_XT_MATCH_STATE
-
- To compile it as a module, choose M here. If unsure, say N.
-
-+config NETFILTER_XT_MATCH_LAYER7
-+ tristate '"layer7" match support'
-+ depends on NETFILTER_XTABLES
-+ depends on EXPERIMENTAL && (IP_NF_CONNTRACK || NF_CONNTRACK)
-+ depends on NF_CT_ACCT
-+ help
-+ Say Y if you want to be able to classify connections (and their
-+ packets) based on regular expression matching of their application
-+ layer data. This is one way to classify applications such as
-+ peer-to-peer filesharing systems that do not always use the same
-+ port.
-+
-+ To compile it as a module, choose M here. If unsure, say N.
-+
-+config NETFILTER_XT_MATCH_LAYER7_DEBUG
-+ bool 'Layer 7 debugging output'
-+ depends on NETFILTER_XT_MATCH_LAYER7
-+ help
-+ Say Y to get lots of debugging output.
-+
-+
- config NETFILTER_XT_MATCH_STATISTIC
- tristate '"statistic" match support'
- depends on NETFILTER_ADVANCED
---- a/net/netfilter/Makefile
-+++ b/net/netfilter/Makefile
-@@ -84,6 +84,7 @@ obj-$(CONFIG_NETFILTER_XT_MATCH_RECENT)
- obj-$(CONFIG_NETFILTER_XT_MATCH_SCTP) += xt_sctp.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_SOCKET) += xt_socket.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_STATE) += xt_state.o
-+obj-$(CONFIG_NETFILTER_XT_MATCH_LAYER7) += xt_layer7.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_STATISTIC) += xt_statistic.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
- obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
---- a/net/netfilter/nf_conntrack_core.c
-+++ b/net/netfilter/nf_conntrack_core.c
-@@ -202,6 +202,14 @@ destroy_conntrack(struct nf_conntrack *n
- * too. */
- nf_ct_remove_expectations(ct);
-
-+ #if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
-+ if(ct->layer7.app_proto)
-+ kfree(ct->layer7.app_proto);
-+ if(ct->layer7.app_data)
-+ kfree(ct->layer7.app_data);
-+ #endif
-+
-+
- /* We overload first tuple to link into unconfirmed list. */
- if (!nf_ct_is_confirmed(ct)) {
- BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode));
---- a/net/netfilter/nf_conntrack_standalone.c
-+++ b/net/netfilter/nf_conntrack_standalone.c
-@@ -165,6 +165,12 @@ static int ct_seq_show(struct seq_file *
- return -ENOSPC;
- #endif
-
-+#if defined(CONFIG_NETFILTER_XT_MATCH_LAYER7) || defined(CONFIG_NETFILTER_XT_MATCH_LAYER7_MODULE)
-+ if(ct->layer7.app_proto &&
-+ seq_printf(s, "l7proto=%s ", ct->layer7.app_proto))
-+ return -ENOSPC;
-+#endif
-+
- if (seq_printf(s, "use=%u\n", atomic_read(&ct->ct_general.use)))
- return -ENOSPC;
-
---- /dev/null
-+++ b/net/netfilter/regexp/regexp.c
-@@ -0,0 +1,1197 @@
-+/*
-+ * regcomp and regexec -- regsub and regerror are elsewhere
-+ * @(#)regexp.c 1.3 of 18 April 87
-+ *
-+ * Copyright (c) 1986 by University of Toronto.
-+ * Written by Henry Spencer. Not derived from licensed software.
-+ *
-+ * Permission is granted to anyone to use this software for any
-+ * purpose on any computer system, and to redistribute it freely,
-+ * subject to the following restrictions:
-+ *
-+ * 1. The author is not responsible for the consequences of use of
-+ * this software, no matter how awful, even if they arise
-+ * from defects in it.
-+ *
-+ * 2. The origin of this software must not be misrepresented, either
-+ * by explicit claim or by omission.
-+ *
-+ * 3. Altered versions must be plainly marked as such, and must not
-+ * be misrepresented as being the original software.
-+ *
-+ * Beware that some of this code is subtly aware of the way operator
-+ * precedence is structured in regular expressions. Serious changes in
-+ * regular-expression syntax might require a total rethink.
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ *
-+ * Modified slightly by Matthew Strait to use more modern C.
-+ */
-+
-+#include "regexp.h"
-+#include "regmagic.h"
-+
-+/* added by ethan and matt. Lets it work in both kernel and user space.
-+(So iptables can use it, for instance.) Yea, it goes both ways... */
-+#if __KERNEL__
-+ #define malloc(foo) kmalloc(foo,GFP_ATOMIC)
-+#else
-+ #define printk(format,args...) printf(format,##args)
-+#endif
-+
-+void regerror(char * s)
-+{
-+ printk("<3>Regexp: %s\n", s);
-+ /* NOTREACHED */
-+}
-+
-+/*
-+ * The "internal use only" fields in regexp.h are present to pass info from
-+ * compile to execute that permits the execute phase to run lots faster on
-+ * simple cases. They are:
-+ *
-+ * regstart char that must begin a match; '\0' if none obvious
-+ * reganch is the match anchored (at beginning-of-line only)?
-+ * regmust string (pointer into program) that match must include, or NULL
-+ * regmlen length of regmust string
-+ *
-+ * Regstart and reganch permit very fast decisions on suitable starting points
-+ * for a match, cutting down the work a lot. Regmust permits fast rejection
-+ * of lines that cannot possibly match. The regmust tests are costly enough
-+ * that regcomp() supplies a regmust only if the r.e. contains something
-+ * potentially expensive (at present, the only such thing detected is * or +
-+ * at the start of the r.e., which can involve a lot of backup). Regmlen is
-+ * supplied because the test in regexec() needs it and regcomp() is computing
-+ * it anyway.
-+ */
-+
-+/*
-+ * Structure for regexp "program". This is essentially a linear encoding
-+ * of a nondeterministic finite-state machine (aka syntax charts or
-+ * "railroad normal form" in parsing technology). Each node is an opcode
-+ * plus a "next" pointer, possibly plus an operand. "Next" pointers of
-+ * all nodes except BRANCH implement concatenation; a "next" pointer with
-+ * a BRANCH on both ends of it is connecting two alternatives. (Here we
-+ * have one of the subtle syntax dependencies: an individual BRANCH (as
-+ * opposed to a collection of them) is never concatenated with anything
-+ * because of operator precedence.) The operand of some types of node is
-+ * a literal string; for others, it is a node leading into a sub-FSM. In
-+ * particular, the operand of a BRANCH node is the first node of the branch.
-+ * (NB this is *not* a tree structure: the tail of the branch connects
-+ * to the thing following the set of BRANCHes.) The opcodes are:
-+ */
-+
-+/* definition number opnd? meaning */
-+#define END 0 /* no End of program. */
-+#define BOL 1 /* no Match "" at beginning of line. */
-+#define EOL 2 /* no Match "" at end of line. */
-+#define ANY 3 /* no Match any one character. */
-+#define ANYOF 4 /* str Match any character in this string. */
-+#define ANYBUT 5 /* str Match any character not in this string. */
-+#define BRANCH 6 /* node Match this alternative, or the next... */
-+#define BACK 7 /* no Match "", "next" ptr points backward. */
-+#define EXACTLY 8 /* str Match this string. */
-+#define NOTHING 9 /* no Match empty string. */
-+#define STAR 10 /* node Match this (simple) thing 0 or more times. */
-+#define PLUS 11 /* node Match this (simple) thing 1 or more times. */
-+#define OPEN 20 /* no Mark this point in input as start of #n. */
-+ /* OPEN+1 is number 1, etc. */
-+#define CLOSE 30 /* no Analogous to OPEN. */
-+
-+/*
-+ * Opcode notes:
-+ *
-+ * BRANCH The set of branches constituting a single choice are hooked
-+ * together with their "next" pointers, since precedence prevents
-+ * anything being concatenated to any individual branch. The
-+ * "next" pointer of the last BRANCH in a choice points to the
-+ * thing following the whole choice. This is also where the
-+ * final "next" pointer of each individual branch points; each
-+ * branch starts with the operand node of a BRANCH node.
-+ *
-+ * BACK Normal "next" pointers all implicitly point forward; BACK
-+ * exists to make loop structures possible.
-+ *
-+ * STAR,PLUS '?', and complex '*' and '+', are implemented as circular
-+ * BRANCH structures using BACK. Simple cases (one character
-+ * per match) are implemented with STAR and PLUS for speed
-+ * and to minimize recursive plunges.
-+ *
-+ * OPEN,CLOSE ...are numbered at compile time.
-+ */
-+
-+/*
-+ * A node is one char of opcode followed by two chars of "next" pointer.
-+ * "Next" pointers are stored as two 8-bit pieces, high order first. The
-+ * value is a positive offset from the opcode of the node containing it.
-+ * An operand, if any, simply follows the node. (Note that much of the
-+ * code generation knows about this implicit relationship.)
-+ *
-+ * Using two bytes for the "next" pointer is vast overkill for most things,
-+ * but allows patterns to get big without disasters.
-+ */
-+#define OP(p) (*(p))
-+#define NEXT(p) (((*((p)+1)&0377)<<8) + (*((p)+2)&0377))
-+#define OPERAND(p) ((p) + 3)
-+
-+/*
-+ * See regmagic.h for one further detail of program structure.
-+ */
-+
-+
-+/*
-+ * Utility definitions.
-+ */
-+#ifndef CHARBITS
-+#define UCHARAT(p) ((int)*(unsigned char *)(p))
-+#else
-+#define UCHARAT(p) ((int)*(p)&CHARBITS)
-+#endif
-+
-+#define FAIL(m) { regerror(m); return(NULL); }
-+#define ISMULT(c) ((c) == '*' || (c) == '+' || (c) == '?')
-+#define META "^$.[()|?+*\\"
-+
-+/*
-+ * Flags to be passed up and down.
-+ */
-+#define HASWIDTH 01 /* Known never to match null string. */
-+#define SIMPLE 02 /* Simple enough to be STAR/PLUS operand. */
-+#define SPSTART 04 /* Starts with * or +. */
-+#define WORST 0 /* Worst case. */
-+
-+/*
-+ * Global work variables for regcomp().
-+ */
-+struct match_globals {
-+char *reginput; /* String-input pointer. */
-+char *regbol; /* Beginning of input, for ^ check. */
-+char **regstartp; /* Pointer to startp array. */
-+char **regendp; /* Ditto for endp. */
-+char *regparse; /* Input-scan pointer. */
-+int regnpar; /* () count. */
-+char regdummy;
-+char *regcode; /* Code-emit pointer; ®dummy = don't. */
-+long regsize; /* Code size. */
-+};
-+
-+/*
-+ * Forward declarations for regcomp()'s friends.
-+ */
-+#ifndef STATIC
-+#define STATIC static
-+#endif
-+STATIC char *reg(struct match_globals *g, int paren,int *flagp);
-+STATIC char *regbranch(struct match_globals *g, int *flagp);
-+STATIC char *regpiece(struct match_globals *g, int *flagp);
-+STATIC char *regatom(struct match_globals *g, int *flagp);
-+STATIC char *regnode(struct match_globals *g, char op);
-+STATIC char *regnext(struct match_globals *g, char *p);
-+STATIC void regc(struct match_globals *g, char b);
-+STATIC void reginsert(struct match_globals *g, char op, char *opnd);
-+STATIC void regtail(struct match_globals *g, char *p, char *val);
-+STATIC void regoptail(struct match_globals *g, char *p, char *val);
-+
-+
-+__kernel_size_t my_strcspn(const char *s1,const char *s2)
-+{
-+ char *scan1;
-+ char *scan2;
-+ int count;
-+
-+ count = 0;
-+ for (scan1 = (char *)s1; *scan1 != '\0'; scan1++) {
-+ for (scan2 = (char *)s2; *scan2 != '\0';) /* ++ moved down. */
-+ if (*scan1 == *scan2++)
-+ return(count);
-+ count++;
-+ }
-+ return(count);
-+}
-+
-+/*
-+ - regcomp - compile a regular expression into internal code
-+ *
-+ * We can't allocate space until we know how big the compiled form will be,
-+ * but we can't compile it (and thus know how big it is) until we've got a
-+ * place to put the code. So we cheat: we compile it twice, once with code
-+ * generation turned off and size counting turned on, and once "for real".
-+ * This also means that we don't allocate space until we are sure that the
-+ * thing really will compile successfully, and we never have to move the
-+ * code and thus invalidate pointers into it. (Note that it has to be in
-+ * one piece because free() must be able to free it all.)
-+ *
-+ * Beware that the optimization-preparation code in here knows about some
-+ * of the structure of the compiled regexp.
-+ */
-+regexp *
-+regcomp(char *exp,int *patternsize)
-+{
-+ register regexp *r;
-+ register char *scan;
-+ register char *longest;
-+ register int len;
-+ int flags;
-+ struct match_globals g;
-+
-+ /* commented out by ethan
-+ extern char *malloc();
-+ */
-+
-+ if (exp == NULL)
-+ FAIL("NULL argument");
-+
-+ /* First pass: determine size, legality. */
-+ g.regparse = exp;
-+ g.regnpar = 1;
-+ g.regsize = 0L;
-+ g.regcode = &g.regdummy;
-+ regc(&g, MAGIC);
-+ if (reg(&g, 0, &flags) == NULL)
-+ return(NULL);
-+
-+ /* Small enough for pointer-storage convention? */
-+ if (g.regsize >= 32767L) /* Probably could be 65535L. */
-+ FAIL("regexp too big");
-+
-+ /* Allocate space. */
-+ *patternsize=sizeof(regexp) + (unsigned)g.regsize;
-+ r = (regexp *)malloc(sizeof(regexp) + (unsigned)g.regsize);
-+ if (r == NULL)
-+ FAIL("out of space");
-+
-+ /* Second pass: emit code. */
-+ g.regparse = exp;
-+ g.regnpar = 1;
-+ g.regcode = r->program;
-+ regc(&g, MAGIC);
-+ if (reg(&g, 0, &flags) == NULL)
-+ return(NULL);
-+
-+ /* Dig out information for optimizations. */
-+ r->regstart = '\0'; /* Worst-case defaults. */
-+ r->reganch = 0;
-+ r->regmust = NULL;
-+ r->regmlen = 0;
-+ scan = r->program+1; /* First BRANCH. */
-+ if (OP(regnext(&g, scan)) == END) { /* Only one top-level choice. */
-+ scan = OPERAND(scan);
-+
-+ /* Starting-point info. */
-+ if (OP(scan) == EXACTLY)
-+ r->regstart = *OPERAND(scan);
-+ else if (OP(scan) == BOL)
-+ r->reganch++;
-+
-+ /*
-+ * If there's something expensive in the r.e., find the
-+ * longest literal string that must appear and make it the
-+ * regmust. Resolve ties in favor of later strings, since
-+ * the regstart check works with the beginning of the r.e.
-+ * and avoiding duplication strengthens checking. Not a
-+ * strong reason, but sufficient in the absence of others.
-+ */
-+ if (flags&SPSTART) {
-+ longest = NULL;
-+ len = 0;
-+ for (; scan != NULL; scan = regnext(&g, scan))
-+ if (OP(scan) == EXACTLY && strlen(OPERAND(scan)) >= len) {
-+ longest = OPERAND(scan);
-+ len = strlen(OPERAND(scan));
-+ }
-+ r->regmust = longest;
-+ r->regmlen = len;
-+ }
-+ }
-+
-+ return(r);
-+}
-+
-+/*
-+ - reg - regular expression, i.e. main body or parenthesized thing
-+ *
-+ * Caller must absorb opening parenthesis.
-+ *
-+ * Combining parenthesis handling with the base level of regular expression
-+ * is a trifle forced, but the need to tie the tails of the branches to what
-+ * follows makes it hard to avoid.
-+ */
-+static char *
-+reg(struct match_globals *g, int paren, int *flagp /* Parenthesized? */ )
-+{
-+ register char *ret;
-+ register char *br;
-+ register char *ender;
-+ register int parno = 0; /* 0 makes gcc happy */
-+ int flags;
-+
-+ *flagp = HASWIDTH; /* Tentatively. */
-+
-+ /* Make an OPEN node, if parenthesized. */
-+ if (paren) {
-+ if (g->regnpar >= NSUBEXP)
-+ FAIL("too many ()");
-+ parno = g->regnpar;
-+ g->regnpar++;
-+ ret = regnode(g, OPEN+parno);
-+ } else
-+ ret = NULL;
-+
-+ /* Pick up the branches, linking them together. */
-+ br = regbranch(g, &flags);
-+ if (br == NULL)
-+ return(NULL);
-+ if (ret != NULL)
-+ regtail(g, ret, br); /* OPEN -> first. */
-+ else
-+ ret = br;
-+ if (!(flags&HASWIDTH))
-+ *flagp &= ~HASWIDTH;
-+ *flagp |= flags&SPSTART;
-+ while (*g->regparse == '|') {
-+ g->regparse++;
-+ br = regbranch(g, &flags);
-+ if (br == NULL)
-+ return(NULL);
-+ regtail(g, ret, br); /* BRANCH -> BRANCH. */
-+ if (!(flags&HASWIDTH))
-+ *flagp &= ~HASWIDTH;
-+ *flagp |= flags&SPSTART;
-+ }
-+
-+ /* Make a closing node, and hook it on the end. */
-+ ender = regnode(g, (paren) ? CLOSE+parno : END);
-+ regtail(g, ret, ender);
-+
-+ /* Hook the tails of the branches to the closing node. */
-+ for (br = ret; br != NULL; br = regnext(g, br))
-+ regoptail(g, br, ender);
-+
-+ /* Check for proper termination. */
-+ if (paren && *g->regparse++ != ')') {
-+ FAIL("unmatched ()");
-+ } else if (!paren && *g->regparse != '\0') {
-+ if (*g->regparse == ')') {
-+ FAIL("unmatched ()");
-+ } else
-+ FAIL("junk on end"); /* "Can't happen". */
-+ /* NOTREACHED */
-+ }
-+
-+ return(ret);
-+}
-+
-+/*
-+ - regbranch - one alternative of an | operator
-+ *
-+ * Implements the concatenation operator.
-+ */
-+static char *
-+regbranch(struct match_globals *g, int *flagp)
-+{
-+ register char *ret;
-+ register char *chain;
-+ register char *latest;
-+ int flags;
-+
-+ *flagp = WORST; /* Tentatively. */
-+
-+ ret = regnode(g, BRANCH);
-+ chain = NULL;
-+ while (*g->regparse != '\0' && *g->regparse != '|' && *g->regparse != ')') {
-+ latest = regpiece(g, &flags);
-+ if (latest == NULL)
-+ return(NULL);
-+ *flagp |= flags&HASWIDTH;
-+ if (chain == NULL) /* First piece. */
-+ *flagp |= flags&SPSTART;
-+ else
-+ regtail(g, chain, latest);
-+ chain = latest;
-+ }
-+ if (chain == NULL) /* Loop ran zero times. */
-+ (void) regnode(g, NOTHING);
-+
-+ return(ret);
-+}
-+
-+/*
-+ - regpiece - something followed by possible [*+?]
-+ *
-+ * Note that the branching code sequences used for ? and the general cases
-+ * of * and + are somewhat optimized: they use the same NOTHING node as
-+ * both the endmarker for their branch list and the body of the last branch.
-+ * It might seem that this node could be dispensed with entirely, but the
-+ * endmarker role is not redundant.
-+ */
-+static char *
-+regpiece(struct match_globals *g, int *flagp)
-+{
-+ register char *ret;
-+ register char op;
-+ register char *next;
-+ int flags;
-+
-+ ret = regatom(g, &flags);
-+ if (ret == NULL)
-+ return(NULL);
-+
-+ op = *g->regparse;
-+ if (!ISMULT(op)) {
-+ *flagp = flags;
-+ return(ret);
-+ }
-+
-+ if (!(flags&HASWIDTH) && op != '?')
-+ FAIL("*+ operand could be empty");
-+ *flagp = (op != '+') ? (WORST|SPSTART) : (WORST|HASWIDTH);
-+
-+ if (op == '*' && (flags&SIMPLE))
-+ reginsert(g, STAR, ret);
-+ else if (op == '*') {
-+ /* Emit x* as (x&|), where & means "self". */
-+ reginsert(g, BRANCH, ret); /* Either x */
-+ regoptail(g, ret, regnode(g, BACK)); /* and loop */
-+ regoptail(g, ret, ret); /* back */
-+ regtail(g, ret, regnode(g, BRANCH)); /* or */
-+ regtail(g, ret, regnode(g, NOTHING)); /* null. */
-+ } else if (op == '+' && (flags&SIMPLE))
-+ reginsert(g, PLUS, ret);
-+ else if (op == '+') {
-+ /* Emit x+ as x(&|), where & means "self". */
-+ next = regnode(g, BRANCH); /* Either */
-+ regtail(g, ret, next);
-+ regtail(g, regnode(g, BACK), ret); /* loop back */
-+ regtail(g, next, regnode(g, BRANCH)); /* or */
-+ regtail(g, ret, regnode(g, NOTHING)); /* null. */
-+ } else if (op == '?') {
-+ /* Emit x? as (x|) */
-+ reginsert(g, BRANCH, ret); /* Either x */
-+ regtail(g, ret, regnode(g, BRANCH)); /* or */
-+ next = regnode(g, NOTHING); /* null. */
-+ regtail(g, ret, next);
-+ regoptail(g, ret, next);
-+ }
-+ g->regparse++;
-+ if (ISMULT(*g->regparse))
-+ FAIL("nested *?+");
-+
-+ return(ret);
-+}
-+
-+/*
-+ - regatom - the lowest level
-+ *
-+ * Optimization: gobbles an entire sequence of ordinary characters so that
-+ * it can turn them into a single node, which is smaller to store and
-+ * faster to run. Backslashed characters are exceptions, each becoming a
-+ * separate node; the code is simpler that way and it's not worth fixing.
-+ */
-+static char *
-+regatom(struct match_globals *g, int *flagp)
-+{
-+ register char *ret;
-+ int flags;
-+
-+ *flagp = WORST; /* Tentatively. */
-+
-+ switch (*g->regparse++) {
-+ case '^':
-+ ret = regnode(g, BOL);
-+ break;
-+ case '$':
-+ ret = regnode(g, EOL);
-+ break;
-+ case '.':
-+ ret = regnode(g, ANY);
-+ *flagp |= HASWIDTH|SIMPLE;
-+ break;
-+ case '[': {
-+ register int class;
-+ register int classend;
-+
-+ if (*g->regparse == '^') { /* Complement of range. */
-+ ret = regnode(g, ANYBUT);
-+ g->regparse++;
-+ } else
-+ ret = regnode(g, ANYOF);
-+ if (*g->regparse == ']' || *g->regparse == '-')
-+ regc(g, *g->regparse++);
-+ while (*g->regparse != '\0' && *g->regparse != ']') {
-+ if (*g->regparse == '-') {
-+ g->regparse++;
-+ if (*g->regparse == ']' || *g->regparse == '\0')
-+ regc(g, '-');
-+ else {
-+ class = UCHARAT(g->regparse-2)+1;
-+ classend = UCHARAT(g->regparse);
-+ if (class > classend+1)
-+ FAIL("invalid [] range");
-+ for (; class <= classend; class++)
-+ regc(g, class);
-+ g->regparse++;
-+ }
-+ } else
-+ regc(g, *g->regparse++);
-+ }
-+ regc(g, '\0');
-+ if (*g->regparse != ']')
-+ FAIL("unmatched []");
-+ g->regparse++;
-+ *flagp |= HASWIDTH|SIMPLE;
-+ }
-+ break;
-+ case '(':
-+ ret = reg(g, 1, &flags);
-+ if (ret == NULL)
-+ return(NULL);
-+ *flagp |= flags&(HASWIDTH|SPSTART);
-+ break;
-+ case '\0':
-+ case '|':
-+ case ')':
-+ FAIL("internal urp"); /* Supposed to be caught earlier. */
-+ break;
-+ case '?':
-+ case '+':
-+ case '*':
-+ FAIL("?+* follows nothing");
-+ break;
-+ case '\\':
-+ if (*g->regparse == '\0')
-+ FAIL("trailing \\");
-+ ret = regnode(g, EXACTLY);
-+ regc(g, *g->regparse++);
-+ regc(g, '\0');
-+ *flagp |= HASWIDTH|SIMPLE;
-+ break;
-+ default: {
-+ register int len;
-+ register char ender;
-+
-+ g->regparse--;
-+ len = my_strcspn((const char *)g->regparse, (const char *)META);
-+ if (len <= 0)
-+ FAIL("internal disaster");
-+ ender = *(g->regparse+len);
-+ if (len > 1 && ISMULT(ender))
-+ len--; /* Back off clear of ?+* operand. */
-+ *flagp |= HASWIDTH;
-+ if (len == 1)
-+ *flagp |= SIMPLE;
-+ ret = regnode(g, EXACTLY);
-+ while (len > 0) {
-+ regc(g, *g->regparse++);
-+ len--;
-+ }
-+ regc(g, '\0');
-+ }
-+ break;
-+ }
-+
-+ return(ret);
-+}
-+
-+/*
-+ - regnode - emit a node
-+ */
-+static char * /* Location. */
-+regnode(struct match_globals *g, char op)
-+{
-+ register char *ret;
-+ register char *ptr;
-+
-+ ret = g->regcode;
-+ if (ret == &g->regdummy) {
-+ g->regsize += 3;
-+ return(ret);
-+ }
-+
-+ ptr = ret;
-+ *ptr++ = op;
-+ *ptr++ = '\0'; /* Null "next" pointer. */
-+ *ptr++ = '\0';
-+ g->regcode = ptr;
-+
-+ return(ret);
-+}
-+
-+/*
-+ - regc - emit (if appropriate) a byte of code
-+ */
-+static void
-+regc(struct match_globals *g, char b)
-+{
-+ if (g->regcode != &g->regdummy)
-+ *g->regcode++ = b;
-+ else
-+ g->regsize++;
-+}
-+
-+/*
-+ - reginsert - insert an operator in front of already-emitted operand
-+ *
-+ * Means relocating the operand.
-+ */
-+static void
-+reginsert(struct match_globals *g, char op, char* opnd)
-+{
-+ register char *src;
-+ register char *dst;
-+ register char *place;
-+
-+ if (g->regcode == &g->regdummy) {
-+ g->regsize += 3;
-+ return;
-+ }
-+
-+ src = g->regcode;
-+ g->regcode += 3;
-+ dst = g->regcode;
-+ while (src > opnd)
-+ *--dst = *--src;
-+
-+ place = opnd; /* Op node, where operand used to be. */
-+ *place++ = op;
-+ *place++ = '\0';
-+ *place++ = '\0';
-+}
-+
-+/*
-+ - regtail - set the next-pointer at the end of a node chain
-+ */
-+static void
-+regtail(struct match_globals *g, char *p, char *val)
-+{
-+ register char *scan;
-+ register char *temp;
-+ register int offset;
-+
-+ if (p == &g->regdummy)
-+ return;
-+
-+ /* Find last node. */
-+ scan = p;
-+ for (;;) {
-+ temp = regnext(g, scan);
-+ if (temp == NULL)
-+ break;
-+ scan = temp;
-+ }
-+
-+ if (OP(scan) == BACK)
-+ offset = scan - val;
-+ else
-+ offset = val - scan;
-+ *(scan+1) = (offset>>8)&0377;
-+ *(scan+2) = offset&0377;
-+}
-+
-+/*
-+ - regoptail - regtail on operand of first argument; nop if operandless
-+ */
-+static void
-+regoptail(struct match_globals *g, char *p, char *val)
-+{
-+ /* "Operandless" and "op != BRANCH" are synonymous in practice. */
-+ if (p == NULL || p == &g->regdummy || OP(p) != BRANCH)
-+ return;
-+ regtail(g, OPERAND(p), val);
-+}
-+
-+/*
-+ * regexec and friends
-+ */
-+
-+
-+/*
-+ * Forwards.
-+ */
-+STATIC int regtry(struct match_globals *g, regexp *prog, char *string);
-+STATIC int regmatch(struct match_globals *g, char *prog);
-+STATIC int regrepeat(struct match_globals *g, char *p);
-+
-+#ifdef DEBUG
-+int regnarrate = 0;
-+void regdump();
-+STATIC char *regprop(char *op);
-+#endif
-+
-+/*
-+ - regexec - match a regexp against a string
-+ */
-+int
-+regexec(regexp *prog, char *string)
-+{
-+ register char *s;
-+ struct match_globals g;
-+
-+ /* Be paranoid... */
-+ if (prog == NULL || string == NULL) {
-+ printk("<3>Regexp: NULL parameter\n");
-+ return(0);
-+ }
-+
-+ /* Check validity of program. */
-+ if (UCHARAT(prog->program) != MAGIC) {
-+ printk("<3>Regexp: corrupted program\n");
-+ return(0);
-+ }
-+
-+ /* If there is a "must appear" string, look for it. */
-+ if (prog->regmust != NULL) {
-+ s = string;
-+ while ((s = strchr(s, prog->regmust[0])) != NULL) {
-+ if (strncmp(s, prog->regmust, prog->regmlen) == 0)
-+ break; /* Found it. */
-+ s++;
-+ }
-+ if (s == NULL) /* Not present. */
-+ return(0);
-+ }
-+
-+ /* Mark beginning of line for ^ . */
-+ g.regbol = string;
-+
-+ /* Simplest case: anchored match need be tried only once. */
-+ if (prog->reganch)
-+ return(regtry(&g, prog, string));
-+
-+ /* Messy cases: unanchored match. */
-+ s = string;
-+ if (prog->regstart != '\0')
-+ /* We know what char it must start with. */
-+ while ((s = strchr(s, prog->regstart)) != NULL) {
-+ if (regtry(&g, prog, s))
-+ return(1);
-+ s++;
-+ }
-+ else
-+ /* We don't -- general case. */
-+ do {
-+ if (regtry(&g, prog, s))
-+ return(1);
-+ } while (*s++ != '\0');
-+
-+ /* Failure. */
-+ return(0);
-+}
-+
-+/*
-+ - regtry - try match at specific point
-+ */
-+static int /* 0 failure, 1 success */
-+regtry(struct match_globals *g, regexp *prog, char *string)
-+{
-+ register int i;
-+ register char **sp;
-+ register char **ep;
-+
-+ g->reginput = string;
-+ g->regstartp = prog->startp;
-+ g->regendp = prog->endp;
-+
-+ sp = prog->startp;
-+ ep = prog->endp;
-+ for (i = NSUBEXP; i > 0; i--) {
-+ *sp++ = NULL;
-+ *ep++ = NULL;
-+ }
-+ if (regmatch(g, prog->program + 1)) {
-+ prog->startp[0] = string;
-+ prog->endp[0] = g->reginput;
-+ return(1);
-+ } else
-+ return(0);
-+}
-+
-+/*
-+ - regmatch - main matching routine
-+ *
-+ * Conceptually the strategy is simple: check to see whether the current
-+ * node matches, call self recursively to see whether the rest matches,
-+ * and then act accordingly. In practice we make some effort to avoid
-+ * recursion, in particular by going through "ordinary" nodes (that don't
-+ * need to know whether the rest of the match failed) by a loop instead of
-+ * by recursion.
-+ */
-+static int /* 0 failure, 1 success */
-+regmatch(struct match_globals *g, char *prog)
-+{
-+ register char *scan = prog; /* Current node. */
-+ char *next; /* Next node. */
-+
-+#ifdef DEBUG
-+ if (scan != NULL && regnarrate)
-+ fprintf(stderr, "%s(\n", regprop(scan));
-+#endif
-+ while (scan != NULL) {
-+#ifdef DEBUG
-+ if (regnarrate)
-+ fprintf(stderr, "%s...\n", regprop(scan));
-+#endif
-+ next = regnext(g, scan);
-+
-+ switch (OP(scan)) {
-+ case BOL:
-+ if (g->reginput != g->regbol)
-+ return(0);
-+ break;
-+ case EOL:
-+ if (*g->reginput != '\0')
-+ return(0);
-+ break;
-+ case ANY:
-+ if (*g->reginput == '\0')
-+ return(0);
-+ g->reginput++;
-+ break;
-+ case EXACTLY: {
-+ register int len;
-+ register char *opnd;
-+
-+ opnd = OPERAND(scan);
-+ /* Inline the first character, for speed. */
-+ if (*opnd != *g->reginput)
-+ return(0);
-+ len = strlen(opnd);
-+ if (len > 1 && strncmp(opnd, g->reginput, len) != 0)
-+ return(0);
-+ g->reginput += len;
-+ }
-+ break;
-+ case ANYOF:
-+ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) == NULL)
-+ return(0);
-+ g->reginput++;
-+ break;
-+ case ANYBUT:
-+ if (*g->reginput == '\0' || strchr(OPERAND(scan), *g->reginput) != NULL)
-+ return(0);
-+ g->reginput++;
-+ break;
-+ case NOTHING:
-+ case BACK:
-+ break;
-+ case OPEN+1:
-+ case OPEN+2:
-+ case OPEN+3:
-+ case OPEN+4:
-+ case OPEN+5:
-+ case OPEN+6:
-+ case OPEN+7:
-+ case OPEN+8:
-+ case OPEN+9: {
-+ register int no;
-+ register char *save;
-+
-+ no = OP(scan) - OPEN;
-+ save = g->reginput;
-+
-+ if (regmatch(g, next)) {
-+ /*
-+ * Don't set startp if some later
-+ * invocation of the same parentheses
-+ * already has.
-+ */
-+ if (g->regstartp[no] == NULL)
-+ g->regstartp[no] = save;
-+ return(1);
-+ } else
-+ return(0);
-+ }
-+ break;
-+ case CLOSE+1:
-+ case CLOSE+2:
-+ case CLOSE+3:
-+ case CLOSE+4:
-+ case CLOSE+5:
-+ case CLOSE+6:
-+ case CLOSE+7:
-+ case CLOSE+8:
-+ case CLOSE+9:
-+ {
-+ register int no;
-+ register char *save;
-+
-+ no = OP(scan) - CLOSE;
-+ save = g->reginput;
-+
-+ if (regmatch(g, next)) {
-+ /*
-+ * Don't set endp if some later
-+ * invocation of the same parentheses
-+ * already has.
-+ */
-+ if (g->regendp[no] == NULL)
-+ g->regendp[no] = save;
-+ return(1);
-+ } else
-+ return(0);
-+ }
-+ break;
-+ case BRANCH: {
-+ register char *save;
-+
-+ if (OP(next) != BRANCH) /* No choice. */
-+ next = OPERAND(scan); /* Avoid recursion. */
-+ else {
-+ do {
-+ save = g->reginput;
-+ if (regmatch(g, OPERAND(scan)))
-+ return(1);
-+ g->reginput = save;
-+ scan = regnext(g, scan);
-+ } while (scan != NULL && OP(scan) == BRANCH);
-+ return(0);
-+ /* NOTREACHED */
-+ }
-+ }
-+ break;
-+ case STAR:
-+ case PLUS: {
-+ register char nextch;
-+ register int no;
-+ register char *save;
-+ register int min;
-+
-+ /*
-+ * Lookahead to avoid useless match attempts
-+ * when we know what character comes next.
-+ */
-+ nextch = '\0';
-+ if (OP(next) == EXACTLY)
-+ nextch = *OPERAND(next);
-+ min = (OP(scan) == STAR) ? 0 : 1;
-+ save = g->reginput;
-+ no = regrepeat(g, OPERAND(scan));
-+ while (no >= min) {
-+ /* If it could work, try it. */
-+ if (nextch == '\0' || *g->reginput == nextch)
-+ if (regmatch(g, next))
-+ return(1);
-+ /* Couldn't or didn't -- back up. */
-+ no--;
-+ g->reginput = save + no;
-+ }
-+ return(0);
-+ }
-+ break;
-+ case END:
-+ return(1); /* Success! */
-+ break;
-+ default:
-+ printk("<3>Regexp: memory corruption\n");
-+ return(0);
-+ break;
-+ }
-+
-+ scan = next;
-+ }
-+
-+ /*
-+ * We get here only if there's trouble -- normally "case END" is
-+ * the terminating point.
-+ */
-+ printk("<3>Regexp: corrupted pointers\n");
-+ return(0);
-+}
-+
-+/*
-+ - regrepeat - repeatedly match something simple, report how many
-+ */
-+static int
-+regrepeat(struct match_globals *g, char *p)
-+{
-+ register int count = 0;
-+ register char *scan;
-+ register char *opnd;
-+
-+ scan = g->reginput;
-+ opnd = OPERAND(p);
-+ switch (OP(p)) {
-+ case ANY:
-+ count = strlen(scan);
-+ scan += count;
-+ break;
-+ case EXACTLY:
-+ while (*opnd == *scan) {
-+ count++;
-+ scan++;
-+ }
-+ break;
-+ case ANYOF:
-+ while (*scan != '\0' && strchr(opnd, *scan) != NULL) {
-+ count++;
-+ scan++;
-+ }
-+ break;
-+ case ANYBUT:
-+ while (*scan != '\0' && strchr(opnd, *scan) == NULL) {
-+ count++;
-+ scan++;
-+ }
-+ break;
-+ default: /* Oh dear. Called inappropriately. */
-+ printk("<3>Regexp: internal foulup\n");
-+ count = 0; /* Best compromise. */
-+ break;
-+ }
-+ g->reginput = scan;
-+
-+ return(count);
-+}
-+
-+/*
-+ - regnext - dig the "next" pointer out of a node
-+ */
-+static char*
-+regnext(struct match_globals *g, char *p)
-+{
-+ register int offset;
-+
-+ if (p == &g->regdummy)
-+ return(NULL);
-+
-+ offset = NEXT(p);
-+ if (offset == 0)
-+ return(NULL);
-+
-+ if (OP(p) == BACK)
-+ return(p-offset);
-+ else
-+ return(p+offset);
-+}
-+
-+#ifdef DEBUG
-+
-+STATIC char *regprop();
-+
-+/*
-+ - regdump - dump a regexp onto stdout in vaguely comprehensible form
-+ */
-+void
-+regdump(regexp *r)
-+{
-+ register char *s;
-+ register char op = EXACTLY; /* Arbitrary non-END op. */
-+ register char *next;
-+ /* extern char *strchr(); */
-+
-+
-+ s = r->program + 1;
-+ while (op != END) { /* While that wasn't END last time... */
-+ op = OP(s);
-+ printf("%2d%s", s-r->program, regprop(s)); /* Where, what. */
-+ next = regnext(s);
-+ if (next == NULL) /* Next ptr. */
-+ printf("(0)");
-+ else
-+ printf("(%d)", (s-r->program)+(next-s));
-+ s += 3;
-+ if (op == ANYOF || op == ANYBUT || op == EXACTLY) {
-+ /* Literal string, where present. */
-+ while (*s != '\0') {
-+ putchar(*s);
-+ s++;
-+ }
-+ s++;
-+ }
-+ putchar('\n');
-+ }
-+
-+ /* Header fields of interest. */
-+ if (r->regstart != '\0')
-+ printf("start `%c' ", r->regstart);
-+ if (r->reganch)
-+ printf("anchored ");
-+ if (r->regmust != NULL)
-+ printf("must have \"%s\"", r->regmust);
-+ printf("\n");
-+}
-+
-+/*
-+ - regprop - printable representation of opcode
-+ */
-+static char *
-+regprop(char *op)
-+{
-+#define BUFLEN 50
-+ register char *p;
-+ static char buf[BUFLEN];
-+
-+ strcpy(buf, ":");
-+
-+ switch (OP(op)) {
-+ case BOL:
-+ p = "BOL";
-+ break;
-+ case EOL:
-+ p = "EOL";
-+ break;
-+ case ANY:
-+ p = "ANY";
-+ break;
-+ case ANYOF:
-+ p = "ANYOF";
-+ break;
-+ case ANYBUT:
-+ p = "ANYBUT";
-+ break;
-+ case BRANCH:
-+ p = "BRANCH";
-+ break;
-+ case EXACTLY:
-+ p = "EXACTLY";
-+ break;
-+ case NOTHING:
-+ p = "NOTHING";
-+ break;
-+ case BACK:
-+ p = "BACK";
-+ break;
-+ case END:
-+ p = "END";
-+ break;
-+ case OPEN+1:
-+ case OPEN+2:
-+ case OPEN+3:
-+ case OPEN+4:
-+ case OPEN+5:
-+ case OPEN+6:
-+ case OPEN+7:
-+ case OPEN+8:
-+ case OPEN+9:
-+ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "OPEN%d", OP(op)-OPEN);
-+ p = NULL;
-+ break;
-+ case CLOSE+1:
-+ case CLOSE+2:
-+ case CLOSE+3:
-+ case CLOSE+4:
-+ case CLOSE+5:
-+ case CLOSE+6:
-+ case CLOSE+7:
-+ case CLOSE+8:
-+ case CLOSE+9:
-+ snprintf(buf+strlen(buf),BUFLEN-strlen(buf), "CLOSE%d", OP(op)-CLOSE);
-+ p = NULL;
-+ break;
-+ case STAR:
-+ p = "STAR";
-+ break;
-+ case PLUS:
-+ p = "PLUS";
-+ break;
-+ default:
-+ printk("<3>Regexp: corrupted opcode\n");
-+ break;
-+ }
-+ if (p != NULL)
-+ strncat(buf, p, BUFLEN-strlen(buf));
-+ return(buf);
-+}
-+#endif
-+
-+
---- /dev/null
-+++ b/net/netfilter/regexp/regexp.h
-@@ -0,0 +1,41 @@
-+/*
-+ * Definitions etc. for regexp(3) routines.
-+ *
-+ * Caveat: this is V8 regexp(3) [actually, a reimplementation thereof],
-+ * not the System V one.
-+ */
-+
-+#ifndef REGEXP_H
-+#define REGEXP_H
-+
-+
-+/*
-+http://www.opensource.apple.com/darwinsource/10.3/expect-1/expect/expect.h ,
-+which contains a version of this library, says:
-+
-+ *
-+ * NSUBEXP must be at least 10, and no greater than 117 or the parser
-+ * will not work properly.
-+ *
-+
-+However, it looks rather like this library is limited to 10. If you think
-+otherwise, let us know.
-+*/
-+
-+#define NSUBEXP 10
-+typedef struct regexp {
-+ char *startp[NSUBEXP];
-+ char *endp[NSUBEXP];
-+ char regstart; /* Internal use only. */
-+ char reganch; /* Internal use only. */
-+ char *regmust; /* Internal use only. */
-+ int regmlen; /* Internal use only. */
-+ char program[1]; /* Unwarranted chumminess with compiler. */
-+} regexp;
-+
-+regexp * regcomp(char *exp, int *patternsize);
-+int regexec(regexp *prog, char *string);
-+void regsub(regexp *prog, char *source, char *dest);
-+void regerror(char *s);
-+
-+#endif
---- /dev/null
-+++ b/net/netfilter/regexp/regmagic.h
-@@ -0,0 +1,5 @@
-+/*
-+ * The first byte of the regexp internal "program" is actually this magic
-+ * number; the start node begins in the second byte.
-+ */
-+#define MAGIC 0234
---- /dev/null
-+++ b/net/netfilter/regexp/regsub.c
-@@ -0,0 +1,95 @@
-+/*
-+ * regsub
-+ * @(#)regsub.c 1.3 of 2 April 86
-+ *
-+ * Copyright (c) 1986 by University of Toronto.
-+ * Written by Henry Spencer. Not derived from licensed software.
-+ *
-+ * Permission is granted to anyone to use this software for any
-+ * purpose on any computer system, and to redistribute it freely,
-+ * subject to the following restrictions:
-+ *
-+ * 1. The author is not responsible for the consequences of use of
-+ * this software, no matter how awful, even if they arise
-+ * from defects in it.
-+ *
-+ * 2. The origin of this software must not be misrepresented, either
-+ * by explicit claim or by omission.
-+ *
-+ * 3. Altered versions must be plainly marked as such, and must not
-+ * be misrepresented as being the original software.
-+ *
-+ *
-+ * This code was modified by Ethan Sommer to work within the kernel
-+ * (it now uses kmalloc etc..)
-+ *
-+ */
-+#include "regexp.h"
-+#include "regmagic.h"
-+#include <linux/string.h>
-+
-+
-+#ifndef CHARBITS
-+#define UCHARAT(p) ((int)*(unsigned char *)(p))
-+#else
-+#define UCHARAT(p) ((int)*(p)&CHARBITS)
-+#endif
-+
-+#if 0
-+//void regerror(char * s)
-+//{
-+// printk("regexp(3): %s", s);
-+// /* NOTREACHED */
-+//}
-+#endif
-+
-+/*
-+ - regsub - perform substitutions after a regexp match
-+ */
-+void
-+regsub(regexp * prog, char * source, char * dest)
-+{
-+ register char *src;
-+ register char *dst;
-+ register char c;
-+ register int no;
-+ register int len;
-+
-+ /* Not necessary and gcc doesn't like it -MLS */
-+ /*extern char *strncpy();*/
-+
-+ if (prog == NULL || source == NULL || dest == NULL) {
-+ regerror("NULL parm to regsub");
-+ return;
-+ }
-+ if (UCHARAT(prog->program) != MAGIC) {
-+ regerror("damaged regexp fed to regsub");
-+ return;
-+ }
-+
-+ src = source;
-+ dst = dest;
-+ while ((c = *src++) != '\0') {
-+ if (c == '&')
-+ no = 0;
-+ else if (c == '\\' && '0' <= *src && *src <= '9')
-+ no = *src++ - '0';
-+ else
-+ no = -1;
-+
-+ if (no < 0) { /* Ordinary character. */
-+ if (c == '\\' && (*src == '\\' || *src == '&'))
-+ c = *src++;
-+ *dst++ = c;
-+ } else if (prog->startp[no] != NULL && prog->endp[no] != NULL) {
-+ len = prog->endp[no] - prog->startp[no];
-+ (void) strncpy(dst, prog->startp[no], len);
-+ dst += len;
-+ if (len != 0 && *(dst-1) == '\0') { /* strncpy hit NUL. */
-+ regerror("damaged match string");
-+ return;
-+ }
-+ }
-+ }
-+ *dst++ = '\0';
-+}
---- /dev/null
-+++ b/net/netfilter/xt_layer7.c
-@@ -0,0 +1,666 @@
-+/*
-+ Kernel module to match application layer (OSI layer 7) data in connections.
-+
-+ http://l7-filter.sf.net
-+
-+ (C) 2003-2009 Matthew Strait and Ethan Sommer.
-+
-+ This program is free software; you can redistribute it and/or
-+ modify it under the terms of the GNU General Public License
-+ as published by the Free Software Foundation; either version
-+ 2 of the License, or (at your option) any later version.
-+ http://www.gnu.org/licenses/gpl.txt
-+
-+ Based on ipt_string.c (C) 2000 Emmanuel Roger <winfield@freegates.be>,
-+ xt_helper.c (C) 2002 Harald Welte and cls_layer7.c (C) 2003 Matthew Strait,
-+ Ethan Sommer, Justin Levandoski.
-+*/
-+
-+#include <linux/spinlock.h>
-+#include <linux/version.h>
-+#include <net/ip.h>
-+#include <net/tcp.h>
-+#include <linux/module.h>
-+#include <linux/skbuff.h>
-+#include <linux/netfilter.h>
-+#include <net/netfilter/nf_conntrack.h>
-+#include <net/netfilter/nf_conntrack_core.h>
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 27)
-+#include <net/netfilter/nf_conntrack_extend.h>
-+#include <net/netfilter/nf_conntrack_acct.h>
-+#endif
-+#include <linux/netfilter/x_tables.h>
-+#include <linux/netfilter/xt_layer7.h>
-+#include <linux/ctype.h>
-+#include <linux/proc_fs.h>
-+
-+#include "regexp/regexp.c"
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Matthew Strait <quadong@users.sf.net>, Ethan Sommer <sommere@users.sf.net>");
-+MODULE_DESCRIPTION("iptables application layer match module");
-+MODULE_ALIAS("ipt_layer7");
-+MODULE_VERSION("2.21");
-+
-+static int maxdatalen = 2048; // this is the default
-+module_param(maxdatalen, int, 0444);
-+MODULE_PARM_DESC(maxdatalen, "maximum bytes of data looked at by l7-filter");
-+#ifdef CONFIG_NETFILTER_XT_MATCH_LAYER7_DEBUG
-+ #define DPRINTK(format,args...) printk(format,##args)
-+#else
-+ #define DPRINTK(format,args...)
-+#endif
-+
-+/* Number of packets whose data we look at.
-+This can be modified through /proc/net/layer7_numpackets */
-+static int num_packets = 10;
-+
-+static struct pattern_cache {
-+ char * regex_string;
-+ regexp * pattern;
-+ struct pattern_cache * next;
-+} * first_pattern_cache = NULL;
-+
-+DEFINE_SPINLOCK(l7_lock);
-+
-+static int total_acct_packets(struct nf_conn *ct)
-+{
-+#if LINUX_VERSION_CODE <= KERNEL_VERSION(2, 6, 26)
-+ BUG_ON(ct == NULL);
-+ return (ct->counters[IP_CT_DIR_ORIGINAL].packets + ct->counters[IP_CT_DIR_REPLY].packets);
-+#else
-+ struct nf_conn_counter *acct;
-+
-+ BUG_ON(ct == NULL);
-+ acct = nf_conn_acct_find(ct);
-+ if (!acct)
-+ return 0;
-+ return (acct[IP_CT_DIR_ORIGINAL].packets + acct[IP_CT_DIR_REPLY].packets);
-+#endif
-+}
-+
-+#ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+/* Converts an unfriendly string into a friendly one by
-+replacing unprintables with periods and all whitespace with " ". */
-+static char * friendly_print(unsigned char * s)
-+{
-+ char * f = kmalloc(strlen(s) + 1, GFP_ATOMIC);
-+ int i;
-+
-+ if(!f) {
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in "
-+ "friendly_print, bailing.\n");
-+ return NULL;
-+ }
-+
-+ for(i = 0; i < strlen(s); i++){
-+ if(isprint(s[i]) && s[i] < 128) f[i] = s[i];
-+ else if(isspace(s[i])) f[i] = ' ';
-+ else f[i] = '.';
-+ }
-+ f[i] = '\0';
-+ return f;
-+}
-+
-+static char dec2hex(int i)
-+{
-+ switch (i) {
-+ case 0 ... 9:
-+ return (i + '0');
-+ break;
-+ case 10 ... 15:
-+ return (i - 10 + 'a');
-+ break;
-+ default:
-+ if (net_ratelimit())
-+ printk("layer7: Problem in dec2hex\n");
-+ return '\0';
-+ }
-+}
-+
-+static char * hex_print(unsigned char * s)
-+{
-+ char * g = kmalloc(strlen(s)*3 + 1, GFP_ATOMIC);
-+ int i;
-+
-+ if(!g) {
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in hex_print, "
-+ "bailing.\n");
-+ return NULL;
-+ }
-+
-+ for(i = 0; i < strlen(s); i++) {
-+ g[i*3 ] = dec2hex(s[i]/16);
-+ g[i*3 + 1] = dec2hex(s[i]%16);
-+ g[i*3 + 2] = ' ';
-+ }
-+ g[i*3] = '\0';
-+
-+ return g;
-+}
-+#endif // DEBUG
-+
-+/* Use instead of regcomp. As we expect to be seeing the same regexps over and
-+over again, it make sense to cache the results. */
-+static regexp * compile_and_cache(const char * regex_string,
-+ const char * protocol)
-+{
-+ struct pattern_cache * node = first_pattern_cache;
-+ struct pattern_cache * last_pattern_cache = first_pattern_cache;
-+ struct pattern_cache * tmp;
-+ unsigned int len;
-+
-+ while (node != NULL) {
-+ if (!strcmp(node->regex_string, regex_string))
-+ return node->pattern;
-+
-+ last_pattern_cache = node;/* points at the last non-NULL node */
-+ node = node->next;
-+ }
-+
-+ /* If we reach the end of the list, then we have not yet cached
-+ the pattern for this regex. Let's do that now.
-+ Be paranoid about running out of memory to avoid list corruption. */
-+ tmp = kmalloc(sizeof(struct pattern_cache), GFP_ATOMIC);
-+
-+ if(!tmp) {
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in "
-+ "compile_and_cache, bailing.\n");
-+ return NULL;
-+ }
-+
-+ tmp->regex_string = kmalloc(strlen(regex_string) + 1, GFP_ATOMIC);
-+ tmp->pattern = kmalloc(sizeof(struct regexp), GFP_ATOMIC);
-+ tmp->next = NULL;
-+
-+ if(!tmp->regex_string || !tmp->pattern) {
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in "
-+ "compile_and_cache, bailing.\n");
-+ kfree(tmp->regex_string);
-+ kfree(tmp->pattern);
-+ kfree(tmp);
-+ return NULL;
-+ }
-+
-+ /* Ok. The new node is all ready now. */
-+ node = tmp;
-+
-+ if(first_pattern_cache == NULL) /* list is empty */
-+ first_pattern_cache = node; /* make node the beginning */
-+ else
-+ last_pattern_cache->next = node; /* attach node to the end */
-+
-+ /* copy the string and compile the regex */
-+ len = strlen(regex_string);
-+ DPRINTK("About to compile this: \"%s\"\n", regex_string);
-+ node->pattern = regcomp((char *)regex_string, &len);
-+ if ( !node->pattern ) {
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: Error compiling regexp "
-+ "\"%s\" (%s)\n",
-+ regex_string, protocol);
-+ /* pattern is now cached as NULL, so we won't try again. */
-+ }
-+
-+ strcpy(node->regex_string, regex_string);
-+ return node->pattern;
-+}
-+
-+static int can_handle(const struct sk_buff *skb)
-+{
-+ if(!ip_hdr(skb)) /* not IP */
-+ return 0;
-+ if(ip_hdr(skb)->protocol != IPPROTO_TCP &&
-+ ip_hdr(skb)->protocol != IPPROTO_UDP &&
-+ ip_hdr(skb)->protocol != IPPROTO_ICMP)
-+ return 0;
-+ return 1;
-+}
-+
-+/* Returns offset the into the skb->data that the application data starts */
-+static int app_data_offset(const struct sk_buff *skb)
-+{
-+ /* In case we are ported somewhere (ebtables?) where ip_hdr(skb)
-+ isn't set, this can be gotten from 4*(skb->data[0] & 0x0f) as well. */
-+ int ip_hl = 4*ip_hdr(skb)->ihl;
-+
-+ if( ip_hdr(skb)->protocol == IPPROTO_TCP ) {
-+ /* 12 == offset into TCP header for the header length field.
-+ Can't get this with skb->h.th->doff because the tcphdr
-+ struct doesn't get set when routing (this is confirmed to be
-+ true in Netfilter as well as QoS.) */
-+ int tcp_hl = 4*(skb->data[ip_hl + 12] >> 4);
-+
-+ return ip_hl + tcp_hl;
-+ } else if( ip_hdr(skb)->protocol == IPPROTO_UDP ) {
-+ return ip_hl + 8; /* UDP header is always 8 bytes */
-+ } else if( ip_hdr(skb)->protocol == IPPROTO_ICMP ) {
-+ return ip_hl + 8; /* ICMP header is 8 bytes */
-+ } else {
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: tried to handle unknown "
-+ "protocol!\n");
-+ return ip_hl + 8; /* something reasonable */
-+ }
-+}
-+
-+/* handles whether there's a match when we aren't appending data anymore */
-+static int match_no_append(struct nf_conn * conntrack,
-+ struct nf_conn * master_conntrack,
-+ enum ip_conntrack_info ctinfo,
-+ enum ip_conntrack_info master_ctinfo,
-+ const struct xt_layer7_info * info)
-+{
-+ /* If we're in here, throw the app data away */
-+ if(master_conntrack->layer7.app_data != NULL) {
-+
-+ #ifdef CONFIG_IP_NF_MATCH_LAYER7_DEBUG
-+ if(!master_conntrack->layer7.app_proto) {
-+ char * f =
-+ friendly_print(master_conntrack->layer7.app_data);
-+ char * g =
-+ hex_print(master_conntrack->layer7.app_data);
-+ DPRINTK("\nl7-filter gave up after %d bytes "
-+ "(%d packets):\n%s\n",
-+ strlen(f), total_acct_packets(master_conntrack), f);
-+ kfree(f);
-+ DPRINTK("In hex: %s\n", g);
-+ kfree(g);
-+ }
-+ #endif
-+
-+ kfree(master_conntrack->layer7.app_data);
-+ master_conntrack->layer7.app_data = NULL; /* don't free again */
-+ }
-+
-+ if(master_conntrack->layer7.app_proto){
-+ /* Here child connections set their .app_proto (for /proc) */
-+ if(!conntrack->layer7.app_proto) {
-+ conntrack->layer7.app_proto =
-+ kmalloc(strlen(master_conntrack->layer7.app_proto)+1,
-+ GFP_ATOMIC);
-+ if(!conntrack->layer7.app_proto){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory "
-+ "in match_no_append, "
-+ "bailing.\n");
-+ return 1;
-+ }
-+ strcpy(conntrack->layer7.app_proto,
-+ master_conntrack->layer7.app_proto);
-+ }
-+
-+ return (!strcmp(master_conntrack->layer7.app_proto,
-+ info->protocol));
-+ }
-+ else {
-+ /* If not classified, set to "unknown" to distinguish from
-+ connections that are still being tested. */
-+ master_conntrack->layer7.app_proto =
-+ kmalloc(strlen("unknown")+1, GFP_ATOMIC);
-+ if(!master_conntrack->layer7.app_proto){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in "
-+ "match_no_append, bailing.\n");
-+ return 1;
-+ }
-+ strcpy(master_conntrack->layer7.app_proto, "unknown");
-+ return 0;
-+ }
-+}
-+
-+/* add the new app data to the conntrack. Return number of bytes added. */
-+static int add_data(struct nf_conn * master_conntrack,
-+ char * app_data, int appdatalen)
-+{
-+ int length = 0, i;
-+ int oldlength = master_conntrack->layer7.app_data_len;
-+
-+ /* This is a fix for a race condition by Deti Fliegl. However, I'm not
-+ clear on whether the race condition exists or whether this really
-+ fixes it. I might just be being dense... Anyway, if it's not really
-+ a fix, all it does is waste a very small amount of time. */
-+ if(!master_conntrack->layer7.app_data) return 0;
-+
-+ /* Strip nulls. Make everything lower case (our regex lib doesn't
-+ do case insensitivity). Add it to the end of the current data. */
-+ for(i = 0; i < maxdatalen-oldlength-1 &&
-+ i < appdatalen; i++) {
-+ if(app_data[i] != '\0') {
-+ /* the kernel version of tolower mungs 'upper ascii' */
-+ master_conntrack->layer7.app_data[length+oldlength] =
-+ isascii(app_data[i])?
-+ tolower(app_data[i]) : app_data[i];
-+ length++;
-+ }
-+ }
-+
-+ master_conntrack->layer7.app_data[length+oldlength] = '\0';
-+ master_conntrack->layer7.app_data_len = length + oldlength;
-+
-+ return length;
-+}
-+
-+/* taken from drivers/video/modedb.c */
-+static int my_atoi(const char *s)
-+{
-+ int val = 0;
-+
-+ for (;; s++) {
-+ switch (*s) {
-+ case '0'...'9':
-+ val = 10*val+(*s-'0');
-+ break;
-+ default:
-+ return val;
-+ }
-+ }
-+}
-+
-+/* write out num_packets to userland. */
-+static int layer7_read_proc(char* page, char ** start, off_t off, int count,
-+ int* eof, void * data)
-+{
-+ if(num_packets > 99 && net_ratelimit())
-+ printk(KERN_ERR "layer7: NOT REACHED. num_packets too big\n");
-+
-+ page[0] = num_packets/10 + '0';
-+ page[1] = num_packets%10 + '0';
-+ page[2] = '\n';
-+ page[3] = '\0';
-+
-+ *eof=1;
-+
-+ return 3;
-+}
-+
-+/* Read in num_packets from userland */
-+static int layer7_write_proc(struct file* file, const char* buffer,
-+ unsigned long count, void *data)
-+{
-+ char * foo = kmalloc(count, GFP_ATOMIC);
-+
-+ if(!foo){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory, bailing. "
-+ "num_packets unchanged.\n");
-+ return count;
-+ }
-+
-+ if(copy_from_user(foo, buffer, count)) {
-+ return -EFAULT;
-+ }
-+
-+
-+ num_packets = my_atoi(foo);
-+ kfree (foo);
-+
-+ /* This has an arbitrary limit to make the math easier. I'm lazy.
-+ But anyway, 99 is a LOT! If you want more, you're doing it wrong! */
-+ if(num_packets > 99) {
-+ printk(KERN_WARNING "layer7: num_packets can't be > 99.\n");
-+ num_packets = 99;
-+ } else if(num_packets < 1) {
-+ printk(KERN_WARNING "layer7: num_packets can't be < 1.\n");
-+ num_packets = 1;
-+ }
-+
-+ return count;
-+}
-+
-+static bool
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+match(const struct sk_buff *skbin, const struct xt_match_param *par)
-+#else
-+match(const struct sk_buff *skbin,
-+ const struct net_device *in,
-+ const struct net_device *out,
-+ const struct xt_match *match,
-+ const void *matchinfo,
-+ int offset,
-+ unsigned int protoff,
-+ bool *hotdrop)
-+#endif
-+{
-+ /* sidestep const without getting a compiler warning... */
-+ struct sk_buff * skb = (struct sk_buff *)skbin;
-+
-+ const struct xt_layer7_info * info =
-+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+ par->matchinfo;
-+ #else
-+ matchinfo;
-+ #endif
-+
-+ enum ip_conntrack_info master_ctinfo, ctinfo;
-+ struct nf_conn *master_conntrack, *conntrack;
-+ unsigned char * app_data;
-+ unsigned int pattern_result, appdatalen;
-+ regexp * comppattern;
-+
-+ /* Be paranoid/incompetent - lock the entire match function. */
-+ spin_lock_bh(&l7_lock);
-+
-+ if(!can_handle(skb)){
-+ DPRINTK("layer7: This is some protocol I can't handle.\n");
-+ spin_unlock_bh(&l7_lock);
-+ return info->invert;
-+ }
-+
-+ /* Treat parent & all its children together as one connection, except
-+ for the purpose of setting conntrack->layer7.app_proto in the actual
-+ connection. This makes /proc/net/ip_conntrack more satisfying. */
-+ if(!(conntrack = nf_ct_get(skb, &ctinfo)) ||
-+ !(master_conntrack=nf_ct_get(skb,&master_ctinfo))){
-+ DPRINTK("layer7: couldn't get conntrack.\n");
-+ spin_unlock_bh(&l7_lock);
-+ return info->invert;
-+ }
-+
-+ /* Try to get a master conntrack (and its master etc) for FTP, etc. */
-+ while (master_ct(master_conntrack) != NULL)
-+ master_conntrack = master_ct(master_conntrack);
-+
-+ /* if we've classified it or seen too many packets */
-+ if(total_acct_packets(master_conntrack) > num_packets ||
-+ master_conntrack->layer7.app_proto) {
-+
-+ pattern_result = match_no_append(conntrack, master_conntrack,
-+ ctinfo, master_ctinfo, info);
-+
-+ /* skb->cb[0] == seen. Don't do things twice if there are
-+ multiple l7 rules. I'm not sure that using cb for this purpose
-+ is correct, even though it says "put your private variables
-+ there". But it doesn't look like it is being used for anything
-+ else in the skbs that make it here. */
-+ skb->cb[0] = 1; /* marking it seen here's probably irrelevant */
-+
-+ spin_unlock_bh(&l7_lock);
-+ return (pattern_result ^ info->invert);
-+ }
-+
-+ if(skb_is_nonlinear(skb)){
-+ if(skb_linearize(skb) != 0){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: failed to linearize "
-+ "packet, bailing.\n");
-+ spin_unlock_bh(&l7_lock);
-+ return info->invert;
-+ }
-+ }
-+
-+ /* now that the skb is linearized, it's safe to set these. */
-+ app_data = skb->data + app_data_offset(skb);
-+ appdatalen = skb_tail_pointer(skb) - app_data;
-+
-+ /* the return value gets checked later, when we're ready to use it */
-+ comppattern = compile_and_cache(info->pattern, info->protocol);
-+
-+ /* On the first packet of a connection, allocate space for app data */
-+ if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
-+ !master_conntrack->layer7.app_data){
-+ master_conntrack->layer7.app_data =
-+ kmalloc(maxdatalen, GFP_ATOMIC);
-+ if(!master_conntrack->layer7.app_data){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in "
-+ "match, bailing.\n");
-+ spin_unlock_bh(&l7_lock);
-+ return info->invert;
-+ }
-+
-+ master_conntrack->layer7.app_data[0] = '\0';
-+ }
-+
-+ /* Can be here, but unallocated, if numpackets is increased near
-+ the beginning of a connection */
-+ if(master_conntrack->layer7.app_data == NULL){
-+ spin_unlock_bh(&l7_lock);
-+ return info->invert; /* unmatched */
-+ }
-+
-+ if(!skb->cb[0]){
-+ int newbytes;
-+ newbytes = add_data(master_conntrack, app_data, appdatalen);
-+
-+ if(newbytes == 0) { /* didn't add any data */
-+ skb->cb[0] = 1;
-+ /* Didn't match before, not going to match now */
-+ spin_unlock_bh(&l7_lock);
-+ return info->invert;
-+ }
-+ }
-+
-+ /* If looking for "unknown", then never match. "Unknown" means that
-+ we've given up; we're still trying with these packets. */
-+ if(!strcmp(info->protocol, "unknown")) {
-+ pattern_result = 0;
-+ /* If looking for "unset", then always match. "Unset" means that we
-+ haven't yet classified the connection. */
-+ } else if(!strcmp(info->protocol, "unset")) {
-+ pattern_result = 2;
-+ DPRINTK("layer7: matched unset: not yet classified "
-+ "(%d/%d packets)\n",
-+ total_acct_packets(master_conntrack), num_packets);
-+ /* If the regexp failed to compile, don't bother running it */
-+ } else if(comppattern &&
-+ regexec(comppattern, master_conntrack->layer7.app_data)){
-+ DPRINTK("layer7: matched %s\n", info->protocol);
-+ pattern_result = 1;
-+ } else pattern_result = 0;
-+
-+ if(pattern_result == 1) {
-+ master_conntrack->layer7.app_proto =
-+ kmalloc(strlen(info->protocol)+1, GFP_ATOMIC);
-+ if(!master_conntrack->layer7.app_proto){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in "
-+ "match, bailing.\n");
-+ spin_unlock_bh(&l7_lock);
-+ return (pattern_result ^ info->invert);
-+ }
-+ strcpy(master_conntrack->layer7.app_proto, info->protocol);
-+ } else if(pattern_result > 1) { /* cleanup from "unset" */
-+ pattern_result = 1;
-+ }
-+
-+ /* mark the packet seen */
-+ skb->cb[0] = 1;
-+
-+ spin_unlock_bh(&l7_lock);
-+ return (pattern_result ^ info->invert);
-+}
-+
-+// load nf_conntrack_ipv4
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+static bool check(const struct xt_mtchk_param *par)
-+{
-+ if (nf_ct_l3proto_try_module_get(par->match->family) < 0) {
-+ printk(KERN_WARNING "can't load conntrack support for "
-+ "proto=%d\n", par->match->family);
-+#else
-+static bool check(const char *tablename, const void *inf,
-+ const struct xt_match *match, void *matchinfo,
-+ unsigned int hook_mask)
-+{
-+ if (nf_ct_l3proto_try_module_get(match->family) < 0) {
-+ printk(KERN_WARNING "can't load conntrack support for "
-+ "proto=%d\n", match->family);
-+#endif
-+ return 0;
-+ }
-+ return 1;
-+}
-+
-+
-+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2, 6, 28)
-+ static void destroy(const struct xt_mtdtor_param *par)
-+ {
-+ nf_ct_l3proto_module_put(par->match->family);
-+ }
-+#else
-+ static void destroy(const struct xt_match *match, void *matchinfo)
-+ {
-+ nf_ct_l3proto_module_put(match->family);
-+ }
-+#endif
-+
-+static struct xt_match xt_layer7_match[] __read_mostly = {
-+{
-+ .name = "layer7",
-+ .family = AF_INET,
-+ .checkentry = check,
-+ .match = match,
-+ .destroy = destroy,
-+ .matchsize = sizeof(struct xt_layer7_info),
-+ .me = THIS_MODULE
-+}
-+};
-+
-+static void layer7_cleanup_proc(void)
-+{
-+ remove_proc_entry("layer7_numpackets", init_net.proc_net);
-+}
-+
-+/* register the proc file */
-+static void layer7_init_proc(void)
-+{
-+ struct proc_dir_entry* entry;
-+ entry = create_proc_entry("layer7_numpackets", 0644, init_net.proc_net);
-+ entry->read_proc = layer7_read_proc;
-+ entry->write_proc = layer7_write_proc;
-+}
-+
-+static int __init xt_layer7_init(void)
-+{
-+ need_conntrack();
-+
-+ layer7_init_proc();
-+ if(maxdatalen < 1) {
-+ printk(KERN_WARNING "layer7: maxdatalen can't be < 1, "
-+ "using 1\n");
-+ maxdatalen = 1;
-+ }
-+ /* This is not a hard limit. It's just here to prevent people from
-+ bringing their slow machines to a grinding halt. */
-+ else if(maxdatalen > 65536) {
-+ printk(KERN_WARNING "layer7: maxdatalen can't be > 65536, "
-+ "using 65536\n");
-+ maxdatalen = 65536;
-+ }
-+ return xt_register_matches(xt_layer7_match,
-+ ARRAY_SIZE(xt_layer7_match));
-+}
-+
-+static void __exit xt_layer7_fini(void)
-+{
-+ layer7_cleanup_proc();
-+ xt_unregister_matches(xt_layer7_match, ARRAY_SIZE(xt_layer7_match));
-+}
-+
-+module_init(xt_layer7_init);
-+module_exit(xt_layer7_fini);
+++ /dev/null
---- a/include/linux/netfilter/xt_layer7.h
-+++ b/include/linux/netfilter/xt_layer7.h
-@@ -8,6 +8,7 @@ struct xt_layer7_info {
- char protocol[MAX_PROTOCOL_LEN];
- char pattern[MAX_PATTERN_LEN];
- u_int8_t invert;
-+ u_int8_t pkt;
- };
-
- #endif /* _XT_LAYER7_H */
---- a/net/netfilter/xt_layer7.c
-+++ b/net/netfilter/xt_layer7.c
-@@ -314,33 +314,35 @@ static int match_no_append(struct nf_con
- }
-
- /* add the new app data to the conntrack. Return number of bytes added. */
--static int add_data(struct nf_conn * master_conntrack,
-- char * app_data, int appdatalen)
-+static int add_datastr(char *target, int offset, char *app_data, int len)
- {
- int length = 0, i;
-- int oldlength = master_conntrack->layer7.app_data_len;
--
-- /* This is a fix for a race condition by Deti Fliegl. However, I'm not
-- clear on whether the race condition exists or whether this really
-- fixes it. I might just be being dense... Anyway, if it's not really
-- a fix, all it does is waste a very small amount of time. */
-- if(!master_conntrack->layer7.app_data) return 0;
-+ if (!target) return 0;
-
- /* Strip nulls. Make everything lower case (our regex lib doesn't
- do case insensitivity). Add it to the end of the current data. */
-- for(i = 0; i < maxdatalen-oldlength-1 &&
-- i < appdatalen; i++) {
-+ for(i = 0; i < maxdatalen-offset-1 && i < len; i++) {
- if(app_data[i] != '\0') {
- /* the kernel version of tolower mungs 'upper ascii' */
-- master_conntrack->layer7.app_data[length+oldlength] =
-+ target[length+offset] =
- isascii(app_data[i])?
- tolower(app_data[i]) : app_data[i];
- length++;
- }
- }
-+ target[length+offset] = '\0';
-+
-+ return length;
-+}
-+
-+/* add the new app data to the conntrack. Return number of bytes added. */
-+static int add_data(struct nf_conn * master_conntrack,
-+ char * app_data, int appdatalen)
-+{
-+ int length;
-
-- master_conntrack->layer7.app_data[length+oldlength] = '\0';
-- master_conntrack->layer7.app_data_len = length + oldlength;
-+ length = add_datastr(master_conntrack->layer7.app_data, master_conntrack->layer7.app_data_len, app_data, appdatalen);
-+ master_conntrack->layer7.app_data_len += length;
-
- return length;
- }
-@@ -438,7 +440,7 @@ match(const struct sk_buff *skbin,
-
- enum ip_conntrack_info master_ctinfo, ctinfo;
- struct nf_conn *master_conntrack, *conntrack;
-- unsigned char * app_data;
-+ unsigned char *app_data, *tmp_data;
- unsigned int pattern_result, appdatalen;
- regexp * comppattern;
-
-@@ -466,8 +468,8 @@ match(const struct sk_buff *skbin,
- master_conntrack = master_ct(master_conntrack);
-
- /* if we've classified it or seen too many packets */
-- if(total_acct_packets(master_conntrack) > num_packets ||
-- master_conntrack->layer7.app_proto) {
-+ if(!info->pkt && (total_acct_packets(master_conntrack) > num_packets ||
-+ master_conntrack->layer7.app_proto)) {
-
- pattern_result = match_no_append(conntrack, master_conntrack,
- ctinfo, master_ctinfo, info);
-@@ -500,6 +502,25 @@ match(const struct sk_buff *skbin,
- /* the return value gets checked later, when we're ready to use it */
- comppattern = compile_and_cache(info->pattern, info->protocol);
-
-+ if (info->pkt) {
-+ tmp_data = kmalloc(maxdatalen, GFP_ATOMIC);
-+ if(!tmp_data){
-+ if (net_ratelimit())
-+ printk(KERN_ERR "layer7: out of memory in match, bailing.\n");
-+ return info->invert;
-+ }
-+
-+ tmp_data[0] = '\0';
-+ add_datastr(tmp_data, 0, app_data, appdatalen);
-+ pattern_result = ((comppattern && regexec(comppattern, tmp_data)) ? 1 : 0);
-+
-+ kfree(tmp_data);
-+ tmp_data = NULL;
-+ spin_unlock_bh(&l7_lock);
-+
-+ return (pattern_result ^ info->invert);
-+ }
-+
- /* On the first packet of a connection, allocate space for app data */
- if(total_acct_packets(master_conntrack) == 1 && !skb->cb[0] &&
- !master_conntrack->layer7.app_data){
+++ /dev/null
---- a/include/linux/netfilter_ipv4/ip_tables.h
-+++ b/include/linux/netfilter_ipv4/ip_tables.h
-@@ -62,6 +62,7 @@ struct ipt_ip {
- #define IPT_F_FRAG 0x01 /* Set if rule is a fragment rule */
- #define IPT_F_GOTO 0x02 /* Set if jump is a goto */
- #define IPT_F_MASK 0x03 /* All possible flag bits mask. */
-+#define IPT_F_NO_DEF_MATCH 0x80 /* Internal: no default match rules present */
-
- /* Values for "inv" field in struct ipt_ip. */
- #define IPT_INV_VIA_IN 0x01 /* Invert the sense of IN IFACE. */
---- a/net/ipv4/netfilter/ip_tables.c
-+++ b/net/ipv4/netfilter/ip_tables.c
-@@ -88,6 +88,9 @@ ip_packet_match(const struct iphdr *ip,
-
- #define FWINV(bool, invflg) ((bool) ^ !!(ipinfo->invflags & (invflg)))
-
-+ if (ipinfo->flags & IPT_F_NO_DEF_MATCH)
-+ return true;
-+
- if (FWINV((ip->saddr&ipinfo->smsk.s_addr) != ipinfo->src.s_addr,
- IPT_INV_SRCIP)
- || FWINV((ip->daddr&ipinfo->dmsk.s_addr) != ipinfo->dst.s_addr,
-@@ -147,13 +150,35 @@ ip_packet_match(const struct iphdr *ip,
- return false;
- }
-
-+#undef FWINV
- return true;
- }
-
- static bool
--ip_checkentry(const struct ipt_ip *ip)
-+ip_checkentry(struct ipt_ip *ip)
- {
-- if (ip->flags & ~IPT_F_MASK) {
-+#define FWINV(bool, invflg) ((bool) || (ip->invflags & (invflg)))
-+
-+ if (FWINV(ip->smsk.s_addr, IPT_INV_SRCIP) ||
-+ FWINV(ip->dmsk.s_addr, IPT_INV_DSTIP))
-+ goto has_match_rules;
-+
-+ if (FWINV(!!((const unsigned long *)ip->iniface_mask)[0],
-+ IPT_INV_VIA_IN) ||
-+ FWINV(!!((const unsigned long *)ip->outiface_mask)[0],
-+ IPT_INV_VIA_OUT))
-+ goto has_match_rules;
-+
-+ if (FWINV(ip->proto, IPT_INV_PROTO))
-+ goto has_match_rules;
-+
-+ if (FWINV(ip->flags&IPT_F_FRAG, IPT_INV_FRAG))
-+ goto has_match_rules;
-+
-+ ip->flags |= IPT_F_NO_DEF_MATCH;
-+
-+has_match_rules:
-+ if (ip->flags & ~(IPT_F_MASK|IPT_F_NO_DEF_MATCH)) {
- duprintf("Unknown flag bits set: %08X\n",
- ip->flags & ~IPT_F_MASK);
- return false;
-@@ -163,6 +188,8 @@ ip_checkentry(const struct ipt_ip *ip)
- ip->invflags & ~IPT_INV_MASK);
- return false;
- }
-+
-+#undef FWINV
- return true;
- }
-
-@@ -210,7 +237,6 @@ unconditional(const struct ipt_ip *ip)
- return 0;
-
- return 1;
--#undef FWINV
- }
-
- #if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
-@@ -328,8 +354,27 @@ ipt_do_table(struct sk_buff *skb,
- struct xt_match_param mtpar;
- struct xt_target_param tgpar;
-
-- /* Initialization */
- ip = ip_hdr(skb);
-+
-+ read_lock_bh(&table->lock);
-+ IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-+ private = table->private;
-+ table_base = (void *)private->entries[smp_processor_id()];
-+ e = get_entry(table_base, private->hook_entry[hook]);
-+ if (e->target_offset <= sizeof(struct ipt_entry) &&
-+ (e->ip.flags & IPT_F_NO_DEF_MATCH)) {
-+ struct ipt_entry_target *t = ipt_get_target(e);
-+ if (!t->u.kernel.target->target) {
-+ int v = ((struct ipt_standard_target *)t)->verdict;
-+ if ((v < 0) && (v != IPT_RETURN)) {
-+ ADD_COUNTER(e->counters, ntohs(ip->tot_len), 1);
-+ read_unlock_bh(&table->lock);
-+ return (unsigned)(-v) - 1;
-+ }
-+ }
-+ }
-+
-+ /* Initialization */
- datalen = skb->len - ip->ihl * 4;
- indev = in ? in->name : nulldevname;
- outdev = out ? out->name : nulldevname;
-@@ -347,12 +392,6 @@ ipt_do_table(struct sk_buff *skb,
- mtpar.family = tgpar.family = NFPROTO_IPV4;
- tgpar.hooknum = hook;
-
-- read_lock_bh(&table->lock);
-- IP_NF_ASSERT(table->valid_hooks & (1 << hook));
-- private = table->private;
-- table_base = (void *)private->entries[smp_processor_id()];
-- e = get_entry(table_base, private->hook_entry[hook]);
--
- /* For return from builtin chain */
- back = get_entry(table_base, private->underflow[hook]);
-
+++ /dev/null
---- a/include/linux/netfilter_ipv4/Kbuild
-+++ b/include/linux/netfilter_ipv4/Kbuild
-@@ -45,3 +45,14 @@ header-y += ipt_ttl.h
-
- unifdef-y += ip_queue.h
- unifdef-y += ip_tables.h
-+
-+unifdef-y += ip_set.h
-+header-y += ip_set_iphash.h
-+header-y += ip_set_ipmap.h
-+header-y += ip_set_ipporthash.h
-+unifdef-y += ip_set_iptree.h
-+unifdef-y += ip_set_iptreemap.h
-+header-y += ip_set_jhash.h
-+header-y += ip_set_macipmap.h
-+unifdef-y += ip_set_nethash.h
-+header-y += ip_set_portmap.h
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set.h
-@@ -0,0 +1,498 @@
-+#ifndef _IP_SET_H
-+#define _IP_SET_H
-+
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ * Patrick Schaaf <bof@bof.de>
-+ * Martin Josefsson <gandalf@wlug.westbo.se>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#if 0
-+#define IP_SET_DEBUG
-+#endif
-+
-+/*
-+ * A sockopt of such quality has hardly ever been seen before on the open
-+ * market! This little beauty, hardly ever used: above 64, so it's
-+ * traditionally used for firewalling, not touched (even once!) by the
-+ * 2.0, 2.2 and 2.4 kernels!
-+ *
-+ * Comes with its own certificate of authenticity, valid anywhere in the
-+ * Free world!
-+ *
-+ * Rusty, 19.4.2000
-+ */
-+#define SO_IP_SET 83
-+
-+/*
-+ * Heavily modify by Joakim Axelsson 08.03.2002
-+ * - Made it more modulebased
-+ *
-+ * Additional heavy modifications by Jozsef Kadlecsik 22.02.2004
-+ * - bindings added
-+ * - in order to "deal with" backward compatibility, renamed to ipset
-+ */
-+
-+/*
-+ * Used so that the kernel module and ipset-binary can match their versions
-+ */
-+#define IP_SET_PROTOCOL_VERSION 2
-+
-+#define IP_SET_MAXNAMELEN 32 /* set names and set typenames */
-+
-+/* Lets work with our own typedef for representing an IP address.
-+ * We hope to make the code more portable, possibly to IPv6...
-+ *
-+ * The representation works in HOST byte order, because most set types
-+ * will perform arithmetic operations and compare operations.
-+ *
-+ * For now the type is an uint32_t.
-+ *
-+ * Make sure to ONLY use the functions when translating and parsing
-+ * in order to keep the host byte order and make it more portable:
-+ * parse_ip()
-+ * parse_mask()
-+ * parse_ipandmask()
-+ * ip_tostring()
-+ * (Joakim: where are they???)
-+ */
-+
-+typedef uint32_t ip_set_ip_t;
-+
-+/* Sets are identified by an id in kernel space. Tweak with ip_set_id_t
-+ * and IP_SET_INVALID_ID if you want to increase the max number of sets.
-+ */
-+typedef uint16_t ip_set_id_t;
-+
-+#define IP_SET_INVALID_ID 65535
-+
-+/* How deep we follow bindings */
-+#define IP_SET_MAX_BINDINGS 6
-+
-+/*
-+ * Option flags for kernel operations (ipt_set_info)
-+ */
-+#define IPSET_SRC 0x01 /* Source match/add */
-+#define IPSET_DST 0x02 /* Destination match/add */
-+#define IPSET_MATCH_INV 0x04 /* Inverse matching */
-+
-+/*
-+ * Set features
-+ */
-+#define IPSET_TYPE_IP 0x01 /* IP address type of set */
-+#define IPSET_TYPE_PORT 0x02 /* Port type of set */
-+#define IPSET_DATA_SINGLE 0x04 /* Single data storage */
-+#define IPSET_DATA_DOUBLE 0x08 /* Double data storage */
-+
-+/* Reserved keywords */
-+#define IPSET_TOKEN_DEFAULT ":default:"
-+#define IPSET_TOKEN_ALL ":all:"
-+
-+/* SO_IP_SET operation constants, and their request struct types.
-+ *
-+ * Operation ids:
-+ * 0-99: commands with version checking
-+ * 100-199: add/del/test/bind/unbind
-+ * 200-299: list, save, restore
-+ */
-+
-+/* Single shot operations:
-+ * version, create, destroy, flush, rename and swap
-+ *
-+ * Sets are identified by name.
-+ */
-+
-+#define IP_SET_REQ_STD \
-+ unsigned op; \
-+ unsigned version; \
-+ char name[IP_SET_MAXNAMELEN]
-+
-+#define IP_SET_OP_CREATE 0x00000001 /* Create a new (empty) set */
-+struct ip_set_req_create {
-+ IP_SET_REQ_STD;
-+ char typename[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_OP_DESTROY 0x00000002 /* Remove a (empty) set */
-+struct ip_set_req_std {
-+ IP_SET_REQ_STD;
-+};
-+
-+#define IP_SET_OP_FLUSH 0x00000003 /* Remove all IPs in a set */
-+/* Uses ip_set_req_std */
-+
-+#define IP_SET_OP_RENAME 0x00000004 /* Rename a set */
-+/* Uses ip_set_req_create */
-+
-+#define IP_SET_OP_SWAP 0x00000005 /* Swap two sets */
-+/* Uses ip_set_req_create */
-+
-+union ip_set_name_index {
-+ char name[IP_SET_MAXNAMELEN];
-+ ip_set_id_t index;
-+};
-+
-+#define IP_SET_OP_GET_BYNAME 0x00000006 /* Get set index by name */
-+struct ip_set_req_get_set {
-+ unsigned op;
-+ unsigned version;
-+ union ip_set_name_index set;
-+};
-+
-+#define IP_SET_OP_GET_BYINDEX 0x00000007 /* Get set name by index */
-+/* Uses ip_set_req_get_set */
-+
-+#define IP_SET_OP_VERSION 0x00000100 /* Ask kernel version */
-+struct ip_set_req_version {
-+ unsigned op;
-+ unsigned version;
-+};
-+
-+/* Double shots operations:
-+ * add, del, test, bind and unbind.
-+ *
-+ * First we query the kernel to get the index and type of the target set,
-+ * then issue the command. Validity of IP is checked in kernel in order
-+ * to minimalize sockopt operations.
-+ */
-+
-+/* Get minimal set data for add/del/test/bind/unbind IP */
-+#define IP_SET_OP_ADT_GET 0x00000010 /* Get set and type */
-+struct ip_set_req_adt_get {
-+ unsigned op;
-+ unsigned version;
-+ union ip_set_name_index set;
-+ char typename[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_REQ_BYINDEX \
-+ unsigned op; \
-+ ip_set_id_t index;
-+
-+struct ip_set_req_adt {
-+ IP_SET_REQ_BYINDEX;
-+};
-+
-+#define IP_SET_OP_ADD_IP 0x00000101 /* Add an IP to a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_DEL_IP 0x00000102 /* Remove an IP from a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_TEST_IP 0x00000103 /* Test an IP in a set */
-+/* Uses ip_set_req_adt, with type specific addage */
-+
-+#define IP_SET_OP_BIND_SET 0x00000104 /* Bind an IP to a set */
-+/* Uses ip_set_req_bind, with type specific addage */
-+struct ip_set_req_bind {
-+ IP_SET_REQ_BYINDEX;
-+ char binding[IP_SET_MAXNAMELEN];
-+};
-+
-+#define IP_SET_OP_UNBIND_SET 0x00000105 /* Unbind an IP from a set */
-+/* Uses ip_set_req_bind, with type speficic addage
-+ * index = 0 means unbinding for all sets */
-+
-+#define IP_SET_OP_TEST_BIND_SET 0x00000106 /* Test binding an IP to a set */
-+/* Uses ip_set_req_bind, with type specific addage */
-+
-+/* Multiple shots operations: list, save, restore.
-+ *
-+ * - check kernel version and query the max number of sets
-+ * - get the basic information on all sets
-+ * and size required for the next step
-+ * - get actual set data: header, data, bindings
-+ */
-+
-+/* Get max_sets and the index of a queried set
-+ */
-+#define IP_SET_OP_MAX_SETS 0x00000020
-+struct ip_set_req_max_sets {
-+ unsigned op;
-+ unsigned version;
-+ ip_set_id_t max_sets; /* max_sets */
-+ ip_set_id_t sets; /* real number of sets */
-+ union ip_set_name_index set; /* index of set if name used */
-+};
-+
-+/* Get the id and name of the sets plus size for next step */
-+#define IP_SET_OP_LIST_SIZE 0x00000201
-+#define IP_SET_OP_SAVE_SIZE 0x00000202
-+struct ip_set_req_setnames {
-+ unsigned op;
-+ ip_set_id_t index; /* set to list/save */
-+ size_t size; /* size to get setdata/bindings */
-+ /* followed by sets number of struct ip_set_name_list */
-+};
-+
-+struct ip_set_name_list {
-+ char name[IP_SET_MAXNAMELEN];
-+ char typename[IP_SET_MAXNAMELEN];
-+ ip_set_id_t index;
-+ ip_set_id_t id;
-+};
-+
-+/* The actual list operation */
-+#define IP_SET_OP_LIST 0x00000203
-+struct ip_set_req_list {
-+ IP_SET_REQ_BYINDEX;
-+ /* sets number of struct ip_set_list in reply */
-+};
-+
-+struct ip_set_list {
-+ ip_set_id_t index;
-+ ip_set_id_t binding;
-+ u_int32_t ref;
-+ size_t header_size; /* Set header data of header_size */
-+ size_t members_size; /* Set members data of members_size */
-+ size_t bindings_size; /* Set bindings data of bindings_size */
-+};
-+
-+struct ip_set_hash_list {
-+ ip_set_ip_t ip;
-+ ip_set_id_t binding;
-+};
-+
-+/* The save operation */
-+#define IP_SET_OP_SAVE 0x00000204
-+/* Uses ip_set_req_list, in the reply replaced by
-+ * sets number of struct ip_set_save plus a marker
-+ * ip_set_save followed by ip_set_hash_save structures.
-+ */
-+struct ip_set_save {
-+ ip_set_id_t index;
-+ ip_set_id_t binding;
-+ size_t header_size; /* Set header data of header_size */
-+ size_t members_size; /* Set members data of members_size */
-+};
-+
-+/* At restoring, ip == 0 means default binding for the given set: */
-+struct ip_set_hash_save {
-+ ip_set_ip_t ip;
-+ ip_set_id_t id;
-+ ip_set_id_t binding;
-+};
-+
-+/* The restore operation */
-+#define IP_SET_OP_RESTORE 0x00000205
-+/* Uses ip_set_req_setnames followed by ip_set_restore structures
-+ * plus a marker ip_set_restore, followed by ip_set_hash_save
-+ * structures.
-+ */
-+struct ip_set_restore {
-+ char name[IP_SET_MAXNAMELEN];
-+ char typename[IP_SET_MAXNAMELEN];
-+ ip_set_id_t index;
-+ size_t header_size; /* Create data of header_size */
-+ size_t members_size; /* Set members data of members_size */
-+};
-+
-+static inline int bitmap_bytes(ip_set_ip_t a, ip_set_ip_t b)
-+{
-+ return 4 * ((((b - a + 8) / 8) + 3) / 4);
-+}
-+
-+#ifdef __KERNEL__
-+
-+#define ip_set_printk(format, args...) \
-+ do { \
-+ printk("%s: %s: ", __FILE__, __FUNCTION__); \
-+ printk(format "\n" , ## args); \
-+ } while (0)
-+
-+#if defined(IP_SET_DEBUG)
-+#define DP(format, args...) \
-+ do { \
-+ printk("%s: %s (DBG): ", __FILE__, __FUNCTION__);\
-+ printk(format "\n" , ## args); \
-+ } while (0)
-+#define IP_SET_ASSERT(x) \
-+ do { \
-+ if (!(x)) \
-+ printk("IP_SET_ASSERT: %s:%i(%s)\n", \
-+ __FILE__, __LINE__, __FUNCTION__); \
-+ } while (0)
-+#else
-+#define DP(format, args...)
-+#define IP_SET_ASSERT(x)
-+#endif
-+
-+struct ip_set;
-+
-+/*
-+ * The ip_set_type definition - one per set type, e.g. "ipmap".
-+ *
-+ * Each individual set has a pointer, set->type, going to one
-+ * of these structures. Function pointers inside the structure implement
-+ * the real behaviour of the sets.
-+ *
-+ * If not mentioned differently, the implementation behind the function
-+ * pointers of a set_type, is expected to return 0 if ok, and a negative
-+ * errno (e.g. -EINVAL) on error.
-+ */
-+struct ip_set_type {
-+ struct list_head list; /* next in list of set types */
-+
-+ /* test for IP in set (kernel: iptables -m set src|dst)
-+ * return 0 if not in set, 1 if in set.
-+ */
-+ int (*testip_kernel) (struct ip_set *set,
-+ const struct sk_buff * skb,
-+ ip_set_ip_t *ip,
-+ const u_int32_t *flags,
-+ unsigned char index);
-+
-+ /* test for IP in set (userspace: ipset -T set IP)
-+ * return 0 if not in set, 1 if in set.
-+ */
-+ int (*testip) (struct ip_set *set,
-+ const void *data, size_t size,
-+ ip_set_ip_t *ip);
-+
-+ /*
-+ * Size of the data structure passed by when
-+ * adding/deletin/testing an entry.
-+ */
-+ size_t reqsize;
-+
-+ /* Add IP into set (userspace: ipset -A set IP)
-+ * Return -EEXIST if the address is already in the set,
-+ * and -ERANGE if the address lies outside the set bounds.
-+ * If the address was not already in the set, 0 is returned.
-+ */
-+ int (*addip) (struct ip_set *set,
-+ const void *data, size_t size,
-+ ip_set_ip_t *ip);
-+
-+ /* Add IP into set (kernel: iptables ... -j SET set src|dst)
-+ * Return -EEXIST if the address is already in the set,
-+ * and -ERANGE if the address lies outside the set bounds.
-+ * If the address was not already in the set, 0 is returned.
-+ */
-+ int (*addip_kernel) (struct ip_set *set,
-+ const struct sk_buff * skb,
-+ ip_set_ip_t *ip,
-+ const u_int32_t *flags,
-+ unsigned char index);
-+
-+ /* remove IP from set (userspace: ipset -D set --entry x)
-+ * Return -EEXIST if the address is NOT in the set,
-+ * and -ERANGE if the address lies outside the set bounds.
-+ * If the address really was in the set, 0 is returned.
-+ */
-+ int (*delip) (struct ip_set *set,
-+ const void *data, size_t size,
-+ ip_set_ip_t *ip);
-+
-+ /* remove IP from set (kernel: iptables ... -j SET --entry x)
-+ * Return -EEXIST if the address is NOT in the set,
-+ * and -ERANGE if the address lies outside the set bounds.
-+ * If the address really was in the set, 0 is returned.
-+ */
-+ int (*delip_kernel) (struct ip_set *set,
-+ const struct sk_buff * skb,
-+ ip_set_ip_t *ip,
-+ const u_int32_t *flags,
-+ unsigned char index);
-+
-+ /* new set creation - allocated type specific items
-+ */
-+ int (*create) (struct ip_set *set,
-+ const void *data, size_t size);
-+
-+ /* retry the operation after successfully tweaking the set
-+ */
-+ int (*retry) (struct ip_set *set);
-+
-+ /* set destruction - free type specific items
-+ * There is no return value.
-+ * Can be called only when child sets are destroyed.
-+ */
-+ void (*destroy) (struct ip_set *set);
-+
-+ /* set flushing - reset all bits in the set, or something similar.
-+ * There is no return value.
-+ */
-+ void (*flush) (struct ip_set *set);
-+
-+ /* Listing: size needed for header
-+ */
-+ size_t header_size;
-+
-+ /* Listing: Get the header
-+ *
-+ * Fill in the information in "data".
-+ * This function is always run after list_header_size() under a
-+ * writelock on the set. Therefor is the length of "data" always
-+ * correct.
-+ */
-+ void (*list_header) (const struct ip_set *set,
-+ void *data);
-+
-+ /* Listing: Get the size for the set members
-+ */
-+ int (*list_members_size) (const struct ip_set *set);
-+
-+ /* Listing: Get the set members
-+ *
-+ * Fill in the information in "data".
-+ * This function is always run after list_member_size() under a
-+ * writelock on the set. Therefor is the length of "data" always
-+ * correct.
-+ */
-+ void (*list_members) (const struct ip_set *set,
-+ void *data);
-+
-+ char typename[IP_SET_MAXNAMELEN];
-+ unsigned char features;
-+ int protocol_version;
-+
-+ /* Set this to THIS_MODULE if you are a module, otherwise NULL */
-+ struct module *me;
-+};
-+
-+extern int ip_set_register_set_type(struct ip_set_type *set_type);
-+extern void ip_set_unregister_set_type(struct ip_set_type *set_type);
-+
-+/* A generic ipset */
-+struct ip_set {
-+ char name[IP_SET_MAXNAMELEN]; /* the name of the set */
-+ rwlock_t lock; /* lock for concurrency control */
-+ ip_set_id_t id; /* set id for swapping */
-+ ip_set_id_t binding; /* default binding for the set */
-+ atomic_t ref; /* in kernel and in hash references */
-+ struct ip_set_type *type; /* the set types */
-+ void *data; /* pooltype specific data */
-+};
-+
-+/* Structure to bind set elements to sets */
-+struct ip_set_hash {
-+ struct list_head list; /* list of clashing entries in hash */
-+ ip_set_ip_t ip; /* ip from set */
-+ ip_set_id_t id; /* set id */
-+ ip_set_id_t binding; /* set we bind the element to */
-+};
-+
-+/* register and unregister set references */
-+extern ip_set_id_t ip_set_get_byname(const char name[IP_SET_MAXNAMELEN]);
-+extern ip_set_id_t ip_set_get_byindex(ip_set_id_t id);
-+extern void ip_set_put(ip_set_id_t id);
-+
-+/* API for iptables set match, and SET target */
-+extern void ip_set_addip_kernel(ip_set_id_t id,
-+ const struct sk_buff *skb,
-+ const u_int32_t *flags);
-+extern void ip_set_delip_kernel(ip_set_id_t id,
-+ const struct sk_buff *skb,
-+ const u_int32_t *flags);
-+extern int ip_set_testip_kernel(ip_set_id_t id,
-+ const struct sk_buff *skb,
-+ const u_int32_t *flags);
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /*_IP_SET_H*/
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_iphash.h
-@@ -0,0 +1,30 @@
-+#ifndef __IP_SET_IPHASH_H
-+#define __IP_SET_IPHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iphash"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_iphash {
-+ ip_set_ip_t *members; /* the iphash proper */
-+ uint32_t elements; /* number of elements */
-+ uint32_t hashsize; /* hash size */
-+ uint16_t probes; /* max number of probes */
-+ uint16_t resize; /* resize factor in percent */
-+ ip_set_ip_t netmask; /* netmask */
-+ void *initval[0]; /* initvals for jhash_1word */
-+};
-+
-+struct ip_set_req_iphash_create {
-+ uint32_t hashsize;
-+ uint16_t probes;
-+ uint16_t resize;
-+ ip_set_ip_t netmask;
-+};
-+
-+struct ip_set_req_iphash {
-+ ip_set_ip_t ip;
-+};
-+
-+#endif /* __IP_SET_IPHASH_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_ipmap.h
-@@ -0,0 +1,56 @@
-+#ifndef __IP_SET_IPMAP_H
-+#define __IP_SET_IPMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "ipmap"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_ipmap {
-+ void *members; /* the ipmap proper */
-+ ip_set_ip_t first_ip; /* host byte order, included in range */
-+ ip_set_ip_t last_ip; /* host byte order, included in range */
-+ ip_set_ip_t netmask; /* subnet netmask */
-+ ip_set_ip_t sizeid; /* size of set in IPs */
-+ ip_set_ip_t hosts; /* number of hosts in a subnet */
-+};
-+
-+struct ip_set_req_ipmap_create {
-+ ip_set_ip_t from;
-+ ip_set_ip_t to;
-+ ip_set_ip_t netmask;
-+};
-+
-+struct ip_set_req_ipmap {
-+ ip_set_ip_t ip;
-+};
-+
-+unsigned int
-+mask_to_bits(ip_set_ip_t mask)
-+{
-+ unsigned int bits = 32;
-+ ip_set_ip_t maskaddr;
-+
-+ if (mask == 0xFFFFFFFF)
-+ return bits;
-+
-+ maskaddr = 0xFFFFFFFE;
-+ while (--bits >= 0 && maskaddr != mask)
-+ maskaddr <<= 1;
-+
-+ return bits;
-+}
-+
-+ip_set_ip_t
-+range_to_mask(ip_set_ip_t from, ip_set_ip_t to, unsigned int *bits)
-+{
-+ ip_set_ip_t mask = 0xFFFFFFFE;
-+
-+ *bits = 32;
-+ while (--(*bits) >= 0 && mask && (to & mask) != from)
-+ mask <<= 1;
-+
-+ return mask;
-+}
-+
-+#endif /* __IP_SET_IPMAP_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_ipporthash.h
-@@ -0,0 +1,34 @@
-+#ifndef __IP_SET_IPPORTHASH_H
-+#define __IP_SET_IPPORTHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "ipporthash"
-+#define MAX_RANGE 0x0000FFFF
-+#define INVALID_PORT (MAX_RANGE + 1)
-+
-+struct ip_set_ipporthash {
-+ ip_set_ip_t *members; /* the ipporthash proper */
-+ uint32_t elements; /* number of elements */
-+ uint32_t hashsize; /* hash size */
-+ uint16_t probes; /* max number of probes */
-+ uint16_t resize; /* resize factor in percent */
-+ ip_set_ip_t first_ip; /* host byte order, included in range */
-+ ip_set_ip_t last_ip; /* host byte order, included in range */
-+ void *initval[0]; /* initvals for jhash_1word */
-+};
-+
-+struct ip_set_req_ipporthash_create {
-+ uint32_t hashsize;
-+ uint16_t probes;
-+ uint16_t resize;
-+ ip_set_ip_t from;
-+ ip_set_ip_t to;
-+};
-+
-+struct ip_set_req_ipporthash {
-+ ip_set_ip_t ip;
-+ ip_set_ip_t port;
-+};
-+
-+#endif /* __IP_SET_IPPORTHASH_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_iptree.h
-@@ -0,0 +1,40 @@
-+#ifndef __IP_SET_IPTREE_H
-+#define __IP_SET_IPTREE_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iptree"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_iptreed {
-+ unsigned long expires[256]; /* x.x.x.ADDR */
-+};
-+
-+struct ip_set_iptreec {
-+ struct ip_set_iptreed *tree[256]; /* x.x.ADDR.* */
-+};
-+
-+struct ip_set_iptreeb {
-+ struct ip_set_iptreec *tree[256]; /* x.ADDR.*.* */
-+};
-+
-+struct ip_set_iptree {
-+ unsigned int timeout;
-+ unsigned int gc_interval;
-+#ifdef __KERNEL__
-+ uint32_t elements; /* number of elements */
-+ struct timer_list gc;
-+ struct ip_set_iptreeb *tree[256]; /* ADDR.*.*.* */
-+#endif
-+};
-+
-+struct ip_set_req_iptree_create {
-+ unsigned int timeout;
-+};
-+
-+struct ip_set_req_iptree {
-+ ip_set_ip_t ip;
-+ unsigned int timeout;
-+};
-+
-+#endif /* __IP_SET_IPTREE_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_iptreemap.h
-@@ -0,0 +1,40 @@
-+#ifndef __IP_SET_IPTREEMAP_H
-+#define __IP_SET_IPTREEMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "iptreemap"
-+
-+#ifdef __KERNEL__
-+struct ip_set_iptreemap_d {
-+ unsigned char bitmap[32]; /* x.x.x.y */
-+};
-+
-+struct ip_set_iptreemap_c {
-+ struct ip_set_iptreemap_d *tree[256]; /* x.x.y.x */
-+};
-+
-+struct ip_set_iptreemap_b {
-+ struct ip_set_iptreemap_c *tree[256]; /* x.y.x.x */
-+ unsigned char dirty[32];
-+};
-+#endif
-+
-+struct ip_set_iptreemap {
-+ unsigned int gc_interval;
-+#ifdef __KERNEL__
-+ struct timer_list gc;
-+ struct ip_set_iptreemap_b *tree[256]; /* y.x.x.x */
-+#endif
-+};
-+
-+struct ip_set_req_iptreemap_create {
-+ unsigned int gc_interval;
-+};
-+
-+struct ip_set_req_iptreemap {
-+ ip_set_ip_t start;
-+ ip_set_ip_t end;
-+};
-+
-+#endif /* __IP_SET_IPTREEMAP_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_jhash.h
-@@ -0,0 +1,148 @@
-+#ifndef _LINUX_IPSET_JHASH_H
-+#define _LINUX_IPSET_JHASH_H
-+
-+/* This is a copy of linux/jhash.h but the types u32/u8 are changed
-+ * to __u32/__u8 so that the header file can be included into
-+ * userspace code as well. Jozsef Kadlecsik (kadlec@blackhole.kfki.hu)
-+ */
-+
-+/* jhash.h: Jenkins hash support.
-+ *
-+ * Copyright (C) 1996 Bob Jenkins (bob_jenkins@burtleburtle.net)
-+ *
-+ * http://burtleburtle.net/bob/hash/
-+ *
-+ * These are the credits from Bob's sources:
-+ *
-+ * lookup2.c, by Bob Jenkins, December 1996, Public Domain.
-+ * hash(), hash2(), hash3, and mix() are externally useful functions.
-+ * Routines to test the hash are included if SELF_TEST is defined.
-+ * You can use this free for any purpose. It has no warranty.
-+ *
-+ * Copyright (C) 2003 David S. Miller (davem@redhat.com)
-+ *
-+ * I've modified Bob's hash to be useful in the Linux kernel, and
-+ * any bugs present are surely my fault. -DaveM
-+ */
-+
-+/* NOTE: Arguments are modified. */
-+#define __jhash_mix(a, b, c) \
-+{ \
-+ a -= b; a -= c; a ^= (c>>13); \
-+ b -= c; b -= a; b ^= (a<<8); \
-+ c -= a; c -= b; c ^= (b>>13); \
-+ a -= b; a -= c; a ^= (c>>12); \
-+ b -= c; b -= a; b ^= (a<<16); \
-+ c -= a; c -= b; c ^= (b>>5); \
-+ a -= b; a -= c; a ^= (c>>3); \
-+ b -= c; b -= a; b ^= (a<<10); \
-+ c -= a; c -= b; c ^= (b>>15); \
-+}
-+
-+/* The golden ration: an arbitrary value */
-+#define JHASH_GOLDEN_RATIO 0x9e3779b9
-+
-+/* The most generic version, hashes an arbitrary sequence
-+ * of bytes. No alignment or length assumptions are made about
-+ * the input key.
-+ */
-+static inline __u32 jhash(void *key, __u32 length, __u32 initval)
-+{
-+ __u32 a, b, c, len;
-+ __u8 *k = key;
-+
-+ len = length;
-+ a = b = JHASH_GOLDEN_RATIO;
-+ c = initval;
-+
-+ while (len >= 12) {
-+ a += (k[0] +((__u32)k[1]<<8) +((__u32)k[2]<<16) +((__u32)k[3]<<24));
-+ b += (k[4] +((__u32)k[5]<<8) +((__u32)k[6]<<16) +((__u32)k[7]<<24));
-+ c += (k[8] +((__u32)k[9]<<8) +((__u32)k[10]<<16)+((__u32)k[11]<<24));
-+
-+ __jhash_mix(a,b,c);
-+
-+ k += 12;
-+ len -= 12;
-+ }
-+
-+ c += length;
-+ switch (len) {
-+ case 11: c += ((__u32)k[10]<<24);
-+ case 10: c += ((__u32)k[9]<<16);
-+ case 9 : c += ((__u32)k[8]<<8);
-+ case 8 : b += ((__u32)k[7]<<24);
-+ case 7 : b += ((__u32)k[6]<<16);
-+ case 6 : b += ((__u32)k[5]<<8);
-+ case 5 : b += k[4];
-+ case 4 : a += ((__u32)k[3]<<24);
-+ case 3 : a += ((__u32)k[2]<<16);
-+ case 2 : a += ((__u32)k[1]<<8);
-+ case 1 : a += k[0];
-+ };
-+
-+ __jhash_mix(a,b,c);
-+
-+ return c;
-+}
-+
-+/* A special optimized version that handles 1 or more of __u32s.
-+ * The length parameter here is the number of __u32s in the key.
-+ */
-+static inline __u32 jhash2(__u32 *k, __u32 length, __u32 initval)
-+{
-+ __u32 a, b, c, len;
-+
-+ a = b = JHASH_GOLDEN_RATIO;
-+ c = initval;
-+ len = length;
-+
-+ while (len >= 3) {
-+ a += k[0];
-+ b += k[1];
-+ c += k[2];
-+ __jhash_mix(a, b, c);
-+ k += 3; len -= 3;
-+ }
-+
-+ c += length * 4;
-+
-+ switch (len) {
-+ case 2 : b += k[1];
-+ case 1 : a += k[0];
-+ };
-+
-+ __jhash_mix(a,b,c);
-+
-+ return c;
-+}
-+
-+
-+/* A special ultra-optimized versions that knows they are hashing exactly
-+ * 3, 2 or 1 word(s).
-+ *
-+ * NOTE: In partilar the "c += length; __jhash_mix(a,b,c);" normally
-+ * done at the end is not done here.
-+ */
-+static inline __u32 jhash_3words(__u32 a, __u32 b, __u32 c, __u32 initval)
-+{
-+ a += JHASH_GOLDEN_RATIO;
-+ b += JHASH_GOLDEN_RATIO;
-+ c += initval;
-+
-+ __jhash_mix(a, b, c);
-+
-+ return c;
-+}
-+
-+static inline __u32 jhash_2words(__u32 a, __u32 b, __u32 initval)
-+{
-+ return jhash_3words(a, b, 0, initval);
-+}
-+
-+static inline __u32 jhash_1word(__u32 a, __u32 initval)
-+{
-+ return jhash_3words(a, 0, 0, initval);
-+}
-+
-+#endif /* _LINUX_IPSET_JHASH_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_macipmap.h
-@@ -0,0 +1,38 @@
-+#ifndef __IP_SET_MACIPMAP_H
-+#define __IP_SET_MACIPMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "macipmap"
-+#define MAX_RANGE 0x0000FFFF
-+
-+/* general flags */
-+#define IPSET_MACIP_MATCHUNSET 1
-+
-+/* per ip flags */
-+#define IPSET_MACIP_ISSET 1
-+
-+struct ip_set_macipmap {
-+ void *members; /* the macipmap proper */
-+ ip_set_ip_t first_ip; /* host byte order, included in range */
-+ ip_set_ip_t last_ip; /* host byte order, included in range */
-+ u_int32_t flags;
-+};
-+
-+struct ip_set_req_macipmap_create {
-+ ip_set_ip_t from;
-+ ip_set_ip_t to;
-+ u_int32_t flags;
-+};
-+
-+struct ip_set_req_macipmap {
-+ ip_set_ip_t ip;
-+ unsigned char ethernet[ETH_ALEN];
-+};
-+
-+struct ip_set_macip {
-+ unsigned short flags;
-+ unsigned char ethernet[ETH_ALEN];
-+};
-+
-+#endif /* __IP_SET_MACIPMAP_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_malloc.h
-@@ -0,0 +1,116 @@
-+#ifndef _IP_SET_MALLOC_H
-+#define _IP_SET_MALLOC_H
-+
-+#ifdef __KERNEL__
-+
-+/* Memory allocation and deallocation */
-+static size_t max_malloc_size = 0;
-+
-+static inline void init_max_malloc_size(void)
-+{
-+#define CACHE(x) max_malloc_size = x;
-+#include <linux/kmalloc_sizes.h>
-+#undef CACHE
-+}
-+
-+static inline void * ip_set_malloc(size_t bytes)
-+{
-+ if (bytes > max_malloc_size)
-+ return vmalloc(bytes);
-+ else
-+ return kmalloc(bytes, GFP_KERNEL);
-+}
-+
-+static inline void ip_set_free(void * data, size_t bytes)
-+{
-+ if (bytes > max_malloc_size)
-+ vfree(data);
-+ else
-+ kfree(data);
-+}
-+
-+struct harray {
-+ size_t max_elements;
-+ void *arrays[0];
-+};
-+
-+static inline void *
-+harray_malloc(size_t hashsize, size_t typesize, int flags)
-+{
-+ struct harray *harray;
-+ size_t max_elements, size, i, j;
-+
-+ if (!max_malloc_size)
-+ init_max_malloc_size();
-+
-+ if (typesize > max_malloc_size)
-+ return NULL;
-+
-+ max_elements = max_malloc_size/typesize;
-+ size = hashsize/max_elements;
-+ if (hashsize % max_elements)
-+ size++;
-+
-+ /* Last pointer signals end of arrays */
-+ harray = kmalloc(sizeof(struct harray) + (size + 1) * sizeof(void *),
-+ flags);
-+
-+ if (!harray)
-+ return NULL;
-+
-+ for (i = 0; i < size - 1; i++) {
-+ harray->arrays[i] = kmalloc(max_elements * typesize, flags);
-+ if (!harray->arrays[i])
-+ goto undo;
-+ memset(harray->arrays[i], 0, max_elements * typesize);
-+ }
-+ harray->arrays[i] = kmalloc((hashsize - i * max_elements) * typesize,
-+ flags);
-+ if (!harray->arrays[i])
-+ goto undo;
-+ memset(harray->arrays[i], 0, (hashsize - i * max_elements) * typesize);
-+
-+ harray->max_elements = max_elements;
-+ harray->arrays[size] = NULL;
-+
-+ return (void *)harray;
-+
-+ undo:
-+ for (j = 0; j < i; j++) {
-+ kfree(harray->arrays[j]);
-+ }
-+ kfree(harray);
-+ return NULL;
-+}
-+
-+static inline void harray_free(void *h)
-+{
-+ struct harray *harray = (struct harray *) h;
-+ size_t i;
-+
-+ for (i = 0; harray->arrays[i] != NULL; i++)
-+ kfree(harray->arrays[i]);
-+ kfree(harray);
-+}
-+
-+static inline void harray_flush(void *h, size_t hashsize, size_t typesize)
-+{
-+ struct harray *harray = (struct harray *) h;
-+ size_t i;
-+
-+ for (i = 0; harray->arrays[i+1] != NULL; i++)
-+ memset(harray->arrays[i], 0, harray->max_elements * typesize);
-+ memset(harray->arrays[i], 0,
-+ (hashsize - i * harray->max_elements) * typesize);
-+}
-+
-+#define HARRAY_ELEM(h, type, which) \
-+({ \
-+ struct harray *__h = (struct harray *)(h); \
-+ ((type)((__h)->arrays[(which)/(__h)->max_elements]) \
-+ + (which)%(__h)->max_elements); \
-+})
-+
-+#endif /* __KERNEL__ */
-+
-+#endif /*_IP_SET_MALLOC_H*/
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_nethash.h
-@@ -0,0 +1,55 @@
-+#ifndef __IP_SET_NETHASH_H
-+#define __IP_SET_NETHASH_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "nethash"
-+#define MAX_RANGE 0x0000FFFF
-+
-+struct ip_set_nethash {
-+ ip_set_ip_t *members; /* the nethash proper */
-+ uint32_t elements; /* number of elements */
-+ uint32_t hashsize; /* hash size */
-+ uint16_t probes; /* max number of probes */
-+ uint16_t resize; /* resize factor in percent */
-+ unsigned char cidr[30]; /* CIDR sizes */
-+ void *initval[0]; /* initvals for jhash_1word */
-+};
-+
-+struct ip_set_req_nethash_create {
-+ uint32_t hashsize;
-+ uint16_t probes;
-+ uint16_t resize;
-+};
-+
-+struct ip_set_req_nethash {
-+ ip_set_ip_t ip;
-+ unsigned char cidr;
-+};
-+
-+static unsigned char shifts[] = {255, 253, 249, 241, 225, 193, 129, 1};
-+
-+static inline ip_set_ip_t
-+pack(ip_set_ip_t ip, unsigned char cidr)
-+{
-+ ip_set_ip_t addr, *paddr = &addr;
-+ unsigned char n, t, *a;
-+
-+ addr = htonl(ip & (0xFFFFFFFF << (32 - (cidr))));
-+#ifdef __KERNEL__
-+ DP("ip:%u.%u.%u.%u/%u", NIPQUAD(addr), cidr);
-+#endif
-+ n = cidr / 8;
-+ t = cidr % 8;
-+ a = &((unsigned char *)paddr)[n];
-+ *a = *a /(1 << (8 - t)) + shifts[t];
-+#ifdef __KERNEL__
-+ DP("n: %u, t: %u, a: %u", n, t, *a);
-+ DP("ip:%u.%u.%u.%u/%u, %u.%u.%u.%u",
-+ HIPQUAD(ip), cidr, NIPQUAD(addr));
-+#endif
-+
-+ return ntohl(addr);
-+}
-+
-+#endif /* __IP_SET_NETHASH_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ip_set_portmap.h
-@@ -0,0 +1,25 @@
-+#ifndef __IP_SET_PORTMAP_H
-+#define __IP_SET_PORTMAP_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+#define SETTYPE_NAME "portmap"
-+#define MAX_RANGE 0x0000FFFF
-+#define INVALID_PORT (MAX_RANGE + 1)
-+
-+struct ip_set_portmap {
-+ void *members; /* the portmap proper */
-+ ip_set_ip_t first_port; /* host byte order, included in range */
-+ ip_set_ip_t last_port; /* host byte order, included in range */
-+};
-+
-+struct ip_set_req_portmap_create {
-+ ip_set_ip_t from;
-+ ip_set_ip_t to;
-+};
-+
-+struct ip_set_req_portmap {
-+ ip_set_ip_t port;
-+};
-+
-+#endif /* __IP_SET_PORTMAP_H */
---- /dev/null
-+++ b/include/linux/netfilter_ipv4/ipt_set.h
-@@ -0,0 +1,21 @@
-+#ifndef _IPT_SET_H
-+#define _IPT_SET_H
-+
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+struct ipt_set_info {
-+ ip_set_id_t index;
-+ u_int32_t flags[IP_SET_MAX_BINDINGS + 1];
-+};
-+
-+/* match info */
-+struct ipt_set_info_match {
-+ struct ipt_set_info match_set;
-+};
-+
-+struct ipt_set_info_target {
-+ struct ipt_set_info add_set;
-+ struct ipt_set_info del_set;
-+};
-+
-+#endif /*_IPT_SET_H*/
---- /dev/null
-+++ b/net/ipv4/netfilter/ip_set.c
-@@ -0,0 +1,2003 @@
-+/* Copyright (C) 2000-2002 Joakim Axelsson <gozem@linux.nu>
-+ * Patrick Schaaf <bof@bof.de>
-+ * Copyright (C) 2003-2004 Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+/* Kernel module for IP set management */
-+
-+#include <linux/version.h>
-+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19)
-+#include <linux/config.h>
-+#endif
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/kmod.h>
-+#include <linux/ip.h>
-+#include <linux/skbuff.h>
-+#include <linux/random.h>
-+#include <linux/jhash.h>
-+#include <linux/netfilter_ipv4/ip_tables.h>
-+#include <linux/errno.h>
-+#include <linux/semaphore.h>
-+#include <asm/uaccess.h>
-+#include <asm/bitops.h>
-+#include <linux/spinlock.h>
-+#include <linux/vmalloc.h>
-+
-+#define ASSERT_READ_LOCK(x)
-+#define ASSERT_WRITE_LOCK(x)
-+#include <linux/netfilter_ipv4/ip_set.h>
-+
-+static struct list_head set_type_list; /* all registered sets */
-+static struct ip_set **ip_set_list; /* all individual sets */
-+static DEFINE_RWLOCK(ip_set_lock); /* protects the lists and the hash */
-+static DECLARE_MUTEX(ip_set_app_mutex); /* serializes user access */
-+static ip_set_id_t ip_set_max = CONFIG_IP_NF_SET_MAX;
-+static ip_set_id_t ip_set_bindings_hash_size = CONFIG_IP_NF_SET_HASHSIZE;
-+static struct list_head *ip_set_hash; /* hash of bindings */
-+static unsigned int ip_set_hash_random; /* random seed */
-+
-+/*
-+ * Sets are identified either by the index in ip_set_list or by id.
-+ * The id never changes and is used to find a key in the hash.
-+ * The index may change by swapping and used at all other places
-+ * (set/SET netfilter modules, binding value, etc.)
-+ *
-+ * Userspace requests are serialized by ip_set_mutex and sets can
-+ * be deleted only from userspace. Therefore ip_set_list locking
-+ * must obey the following rules:
-+ *
-+ * - kernel requests: read and write locking mandatory
-+ * - user requests: read locking optional, write locking mandatory
-+ */
-+
-+static inline void
-+__ip_set_get(ip_set_id_t index)
-+{
-+ atomic_inc(&ip_set_list[index]->ref);
-+}
-+
-+static inline void
-+__ip_set_put(ip_set_id_t index)
-+{
-+ atomic_dec(&ip_set_list[index]->ref);
-+}
-+
-+/*
-+ * Binding routines
-+ */
-+
-+static inline struct ip_set_hash *
-+__ip_set_find(u_int32_t key, ip_set_id_t id, ip_set_ip_t ip)
-+{
-+ struct ip_set_hash *set_hash;
-+
-+ list_for_each_entry(set_hash, &ip_set_hash[key], list)
-+ if (set_hash->id == id && set_hash->ip == ip)
-+ return set_hash;
-+
-+ return NULL;
-+}
-+
-+static ip_set_id_t
-+ip_set_find_in_hash(ip_set_id_t id, ip_set_ip_t ip)
-+{
-+ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+ % ip_set_bindings_hash_size;
-+ struct ip_set_hash *set_hash;
-+
-+ ASSERT_READ_LOCK(&ip_set_lock);
-+ IP_SET_ASSERT(ip_set_list[id]);
-+ DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));
-+
-+ set_hash = __ip_set_find(key, id, ip);
-+
-+ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
-+ HIPQUAD(ip),
-+ set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
-+
-+ return (set_hash != NULL ? set_hash->binding : IP_SET_INVALID_ID);
-+}
-+
-+static inline void
-+__set_hash_del(struct ip_set_hash *set_hash)
-+{
-+ ASSERT_WRITE_LOCK(&ip_set_lock);
-+ IP_SET_ASSERT(ip_set_list[set_hash->binding]);
-+
-+ __ip_set_put(set_hash->binding);
-+ list_del(&set_hash->list);
-+ kfree(set_hash);
-+}
-+
-+static int
-+ip_set_hash_del(ip_set_id_t id, ip_set_ip_t ip)
-+{
-+ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+ % ip_set_bindings_hash_size;
-+ struct ip_set_hash *set_hash;
-+
-+ IP_SET_ASSERT(ip_set_list[id]);
-+ DP("set: %s, ip: %u.%u.%u.%u", ip_set_list[id]->name, HIPQUAD(ip));
-+ write_lock_bh(&ip_set_lock);
-+ set_hash = __ip_set_find(key, id, ip);
-+ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
-+ HIPQUAD(ip),
-+ set_hash != NULL ? ip_set_list[set_hash->binding]->name : "");
-+
-+ if (set_hash != NULL)
-+ __set_hash_del(set_hash);
-+ write_unlock_bh(&ip_set_lock);
-+ return 0;
-+}
-+
-+static int
-+ip_set_hash_add(ip_set_id_t id, ip_set_ip_t ip, ip_set_id_t binding)
-+{
-+ u_int32_t key = jhash_2words(id, ip, ip_set_hash_random)
-+ % ip_set_bindings_hash_size;
-+ struct ip_set_hash *set_hash;
-+ int ret = 0;
-+
-+ IP_SET_ASSERT(ip_set_list[id]);
-+ IP_SET_ASSERT(ip_set_list[binding]);
-+ DP("set: %s, ip: %u.%u.%u.%u, binding: %s", ip_set_list[id]->name,
-+ HIPQUAD(ip), ip_set_list[binding]->name);
-+ write_lock_bh(&ip_set_lock);
-+ set_hash = __ip_set_find(key, id, ip);
-+ if (!set_hash) {
-+ set_hash = kmalloc(sizeof(struct ip_set_hash), GFP_ATOMIC);
-+ if (!set_hash) {
-+ ret = -ENOMEM;
-+ goto unlock;
-+ }
-+ INIT_LIST_HEAD(&set_hash->list);
-+ set_hash->id = id;
-+ set_hash->ip = ip;
-+ list_add(&set_hash->list, &ip_set_hash[key]);
-+ } else {
-+ IP_SET_ASSERT(ip_set_list[set_hash->binding]);
-+ DP("overwrite binding: %s",
-+ ip_set_list[set_hash->binding]->name);
-+ __ip_set_put(set_hash->binding);
-+ }
-+ set_hash->binding = binding;
-+ __ip_set_get(set_hash->binding);
-+ DP("stored: key %u, id %u (%s), ip %u.%u.%u.%u,&nb
projects / openwrt / svn-archive / archive.git / commitdiff