[package] mac80211/ath9k: disable leds on the ar9100 devices
authorGabor Juhos <juhosg@openwrt.org>
Sat, 31 Jan 2009 18:36:07 +0000 (18:36 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sat, 31 Jan 2009 18:36:07 +0000 (18:36 +0000)
SVN-Revision: 14330

package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch [new file with mode: 0644]

diff --git a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
new file mode 100644 (file)
index 0000000..85518a2
--- /dev/null
@@ -0,0 +1,38 @@
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -989,6 +989,11 @@ static void ath_unregister_led(struct at
+ static void ath_deinit_leds(struct ath_softc *sc)
+ {
++#if 0
++      if (AR_SREV_9100(sc->sc_ah))
++              return;
++#endif
++
+       ath_unregister_led(&sc->assoc_led);
+       sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
+       ath_unregister_led(&sc->tx_led);
+@@ -1002,6 +1007,11 @@ static void ath_init_leds(struct ath_sof
+       char *trigger;
+       int ret;
++#if 0
++      if (AR_SREV_9100(sc->sc_ah))
++              return;
++#endif
++
+       /* Configure gpio 1 for output */
+       ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+                           AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+--- a/drivers/net/wireless/ath9k/hw.c
++++ b/drivers/net/wireless/ath9k/hw.c
+@@ -3527,6 +3527,9 @@ void ath9k_hw_cfg_output(struct ath_hal 
+ void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val)
+ {
++      if (AR_SREV_9100(ah))
++              return;
++
+       REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
+               AR_GPIO_BIT(gpio));
+ }