brcm63xx: remove support for 3.8 kernel
authorFlorian Fainelli <florian@openwrt.org>
Mon, 17 Jun 2013 19:32:47 +0000 (19:32 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Mon, 17 Jun 2013 19:32:47 +0000 (19:32 +0000)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36948

142 files changed:
target/linux/brcm63xx/config-3.8 [deleted file]
target/linux/brcm63xx/patches-3.8/001-spi-bcm63xx-reject-transfers-unable-to-transfer.patch [deleted file]
target/linux/brcm63xx/patches-3.8/002-spi-bcm63xx-fix-multi-transfer-messages.patch [deleted file]
target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch [deleted file]
target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch [deleted file]
target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch [deleted file]
target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch [deleted file]
target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch [deleted file]
target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch [deleted file]
target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch [deleted file]
target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch [deleted file]
target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch [deleted file]
target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch [deleted file]
target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch [deleted file]
target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch [deleted file]
target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch [deleted file]
target/linux/brcm63xx/patches-3.8/016-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch [deleted file]
target/linux/brcm63xx/patches-3.8/017-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch [deleted file]
target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch [deleted file]
target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch [deleted file]
target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch [deleted file]
target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch [deleted file]
target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch [deleted file]
target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch [deleted file]
target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch [deleted file]
target/linux/brcm63xx/patches-3.8/025-MIPS-BCM63XX-add-basic-BCM6362-support.patch [deleted file]
target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch [deleted file]
target/linux/brcm63xx/patches-3.8/027-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch [deleted file]
target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch [deleted file]
target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch [deleted file]
target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch [deleted file]
target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch [deleted file]
target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch [deleted file]
target/linux/brcm63xx/patches-3.8/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch [deleted file]
target/linux/brcm63xx/patches-3.8/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch [deleted file]
target/linux/brcm63xx/patches-3.8/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch [deleted file]
target/linux/brcm63xx/patches-3.8/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch [deleted file]
target/linux/brcm63xx/patches-3.8/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-3.8/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-3.8/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-3.8/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch [deleted file]
target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch [deleted file]
target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch [deleted file]
target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch [deleted file]
target/linux/brcm63xx/patches-3.8/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch [deleted file]
target/linux/brcm63xx/patches-3.8/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch [deleted file]
target/linux/brcm63xx/patches-3.8/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch [deleted file]
target/linux/brcm63xx/patches-3.8/300-reset_buttons.patch [deleted file]
target/linux/brcm63xx/patches-3.8/301-led_count.patch [deleted file]
target/linux/brcm63xx/patches-3.8/302-extended-platform-devices.patch [deleted file]
target/linux/brcm63xx/patches-3.8/303-spi-board-info.patch [deleted file]
target/linux/brcm63xx/patches-3.8/304-boardid_fixup.patch [deleted file]
target/linux/brcm63xx/patches-3.8/305-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch [deleted file]
target/linux/brcm63xx/patches-3.8/306-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch [deleted file]
target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-add-HSSPI-register-definitions.patch [deleted file]
target/linux/brcm63xx/patches-3.8/308-board_leds_naming.patch [deleted file]
target/linux/brcm63xx/patches-3.8/309-cfe_version_mod.patch [deleted file]
target/linux/brcm63xx/patches-3.8/310-BCM63XX-Add-SMP-support-to-prom.c.patch [deleted file]
target/linux/brcm63xx/patches-3.8/311-MIPS-BCM63XX-Handle-SW-IRQs-0-1.patch [deleted file]
target/linux/brcm63xx/patches-3.8/312-MIPS-BCM63XX-select-SYS_HAS_CPU_BMIPS4350-for-suppor.patch [deleted file]
target/linux/brcm63xx/patches-3.8/313-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch [deleted file]
target/linux/brcm63xx/patches-3.8/314-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch [deleted file]
target/linux/brcm63xx/patches-3.8/315-MIPS-BCM63XX-append-cpu-number-to-irq_-stat-mask.patch [deleted file]
target/linux/brcm63xx/patches-3.8/316-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch [deleted file]
target/linux/brcm63xx/patches-3.8/317-MIPS-BCM63XX-use-a-helper-for-getting-the-right-regi.patch [deleted file]
target/linux/brcm63xx/patches-3.8/318-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch [deleted file]
target/linux/brcm63xx/patches-3.8/319-MIPS-BCM63XX-protect-irq-register-accesses-with-a-sp.patch [deleted file]
target/linux/brcm63xx/patches-3.8/320-MIPS-BCM63XX-wire-up-the-second-CPU-s-irq-line.patch [deleted file]
target/linux/brcm63xx/patches-3.8/321-MIPS-BCM63XX-add-cpumask-argument-to-unmask.patch [deleted file]
target/linux/brcm63xx/patches-3.8/322-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch [deleted file]
target/linux/brcm63xx/patches-3.8/323-cfe_simplify_detection.patch [deleted file]
target/linux/brcm63xx/patches-3.8/324-bcm63xxpart_use_cfedetection.patch [deleted file]
target/linux/brcm63xx/patches-3.8/400-bcm963xx_flashmap.patch [deleted file]
target/linux/brcm63xx/patches-3.8/401-bcm963xx_real_rootfs_length.patch [deleted file]
target/linux/brcm63xx/patches-3.8/402_bcm63xx_enet_vlan_incoming_fixed.patch [deleted file]
target/linux/brcm63xx/patches-3.8/403-6358-enet1-external-mii-clk.patch [deleted file]
target/linux/brcm63xx/patches-3.8/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch [deleted file]
target/linux/brcm63xx/patches-3.8/405-bcm63xx_enet-implement-reset_autoneg-ethtool.patch [deleted file]
target/linux/brcm63xx/patches-3.8/406-bcm63xx_enet-split-dma-registers-access.patch [deleted file]
target/linux/brcm63xx/patches-3.8/407-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch [deleted file]
target/linux/brcm63xx/patches-3.8/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch [deleted file]
target/linux/brcm63xx/patches-3.8/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch [deleted file]
target/linux/brcm63xx/patches-3.8/410-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch [deleted file]
target/linux/brcm63xx/patches-3.8/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch [deleted file]
target/linux/brcm63xx/patches-3.8/412-MTD-physmap-allow-passing-pp_data.patch [deleted file]
target/linux/brcm63xx/patches-3.8/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch [deleted file]
target/linux/brcm63xx/patches-3.8/414-MTD-m25p80-allow-passing-pp_data.patch [deleted file]
target/linux/brcm63xx/patches-3.8/415-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch [deleted file]
target/linux/brcm63xx/patches-3.8/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch [deleted file]
target/linux/brcm63xx/patches-3.8/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch [deleted file]
target/linux/brcm63xx/patches-3.8/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch [deleted file]
target/linux/brcm63xx/patches-3.8/419-MIPS-BCM63XX-enable-enet-for-BCM6345.patch [deleted file]
target/linux/brcm63xx/patches-3.8/420-BCM63XX-add-endian-check-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-3.8/421-BCM63XX-add-led-pin-for-ath9k.patch [deleted file]
target/linux/brcm63xx/patches-3.8/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch [deleted file]
target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet_add_b53_support.patch [deleted file]
target/linux/brcm63xx/patches-3.8/424-bcm3368_support.patch [deleted file]
target/linux/brcm63xx/patches-3.8/425-bcm933xx_hcs.patch [deleted file]
target/linux/brcm63xx/patches-3.8/500-board-D4PW.patch [deleted file]
target/linux/brcm63xx/patches-3.8/501-board-NB4.patch [deleted file]
target/linux/brcm63xx/patches-3.8/502-board-96338W2_E7T.patch [deleted file]
target/linux/brcm63xx/patches-3.8/503-board-CPVA642.patch [deleted file]
target/linux/brcm63xx/patches-3.8/504-board_dsl_274xb_rev_c.patch [deleted file]
target/linux/brcm63xx/patches-3.8/505-board_spw500v.patch [deleted file]
target/linux/brcm63xx/patches-3.8/506-board_gw6200_gw6000.patch [deleted file]
target/linux/brcm63xx/patches-3.8/507-board-MAGIC.patch [deleted file]
target/linux/brcm63xx/patches-3.8/508-board_hw553.patch [deleted file]
target/linux/brcm63xx/patches-3.8/509-board_rta1320_16m.patch [deleted file]
target/linux/brcm63xx/patches-3.8/510-board_spw303v.patch [deleted file]
target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch [deleted file]
target/linux/brcm63xx/patches-3.8/512-board_BTV2110.patch [deleted file]
target/linux/brcm63xx/patches-3.8/513-board_livebox.patch [deleted file]
target/linux/brcm63xx/patches-3.8/514-board_ct536_ct5621.patch [deleted file]
target/linux/brcm63xx/patches-3.8/515-board_DWV-S0_fixes.patch [deleted file]
target/linux/brcm63xx/patches-3.8/516-board_96348A-122.patch [deleted file]
target/linux/brcm63xx/patches-3.8/517-RTA1205W_16_uart_fixes.patch [deleted file]
target/linux/brcm63xx/patches-3.8/519_board_CPVA502plus.patch [deleted file]
target/linux/brcm63xx/patches-3.8/520-bcm63xx-add-support-for-96368MVWG-board.patch [deleted file]
target/linux/brcm63xx/patches-3.8/521-bcm63xx-add-support-for-96368MVNgr-board.patch [deleted file]
target/linux/brcm63xx/patches-3.8/522-MIPS-BCM63XX-add-96328avng-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-3.8/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch [deleted file]
target/linux/brcm63xx/patches-3.8/524-board_dsl_274xb_rev_f.patch [deleted file]
target/linux/brcm63xx/patches-3.8/525-board_96348w3.patch [deleted file]
target/linux/brcm63xx/patches-3.8/526-board_CT6373-1.patch [deleted file]
target/linux/brcm63xx/patches-3.8/527-board_dva-g3810bn-tl-1.patch [deleted file]
target/linux/brcm63xx/patches-3.8/528-board_nb6.patch [deleted file]
target/linux/brcm63xx/patches-3.8/529-board_fast2604.patch [deleted file]
target/linux/brcm63xx/patches-3.8/530-board_963281T_TEF.patch [deleted file]
target/linux/brcm63xx/patches-3.8/531-board_96328A-1441N1.patch [deleted file]
target/linux/brcm63xx/patches-3.8/532-board_96328a-1241N.patch [deleted file]
target/linux/brcm63xx/patches-3.8/533-board_rta770bw.patch [deleted file]
target/linux/brcm63xx/patches-3.8/534-board_hw556.patch [deleted file]
target/linux/brcm63xx/patches-3.8/535-board_rta770w.patch [deleted file]
target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch [deleted file]
target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch [deleted file]
target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch [deleted file]
target/linux/brcm63xx/patches-3.8/553-boards_probe_switch.patch [deleted file]
target/linux/brcm63xx/patches-3.8/554-board_DWVS0_leds_buttons.patch [deleted file]
target/linux/brcm63xx/patches-3.8/555-netgear_CVG834G_E15R3921.patch [deleted file]
target/linux/brcm63xx/patches-3.8/800-wl_exports.patch [deleted file]
target/linux/brcm63xx/patches-3.8/801-ssb_export_fallback_sprom.patch [deleted file]
target/linux/brcm63xx/patches-3.8/802-rtl8367r_fix_RGMII_support.patch [deleted file]

diff --git a/target/linux/brcm63xx/config-3.8 b/target/linux/brcm63xx/config-3.8
deleted file mode 100644 (file)
index 5e3aab1..0000000
+++ /dev/null
@@ -1,171 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_B53=y
-CONFIG_B53_MMAP_DRIVER=y
-CONFIG_B53_PHY_DRIVER=y
-CONFIG_B53_PHY_FIXUP=y
-CONFIG_B53_SPI_DRIVER=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_EHCI=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_OHCI=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_GENERIC_DUMP_TLB=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_R4K_CACHE_TLB=y
-CONFIG_CPU_R4K_FPU=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CSRC_R4K=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_LEDS_GPIO=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERCPU_RWSEM=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-CONFIG_SPI_BCM63XX=y
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-# CONFIG_USB_HCD_SSB is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-3.8/001-spi-bcm63xx-reject-transfers-unable-to-transfer.patch b/target/linux/brcm63xx/patches-3.8/001-spi-bcm63xx-reject-transfers-unable-to-transfer.patch
deleted file mode 100644 (file)
index 8726b19..0000000
+++ /dev/null
@@ -1,162 +0,0 @@
-From 243970ea035623f70431a80ece802f572cd446be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Dec 2012 00:10:00 +0100
-Subject: [PATCH V2 1/2] spi/bcm63xx: reject transfers unable to transfer
-
-The hardware does not support keeping CS asserted after sending one
-FIFO buffer worth of data, so reject transfers requiring CS being kept
-asserted, either between transers or for a certain time after it,
-or exceeding the FIFO size.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |   91 +++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 49 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -49,16 +49,10 @@ struct bcm63xx_spi {
-       unsigned int            msg_type_shift;
-       unsigned int            msg_ctl_width;
--      /* Data buffers */
--      const unsigned char     *tx_ptr;
--      unsigned char           *rx_ptr;
--
-       /* data iomem */
-       u8 __iomem              *tx_io;
-       const u8 __iomem        *rx_io;
--      int                     remaining_bytes;
--
-       struct clk              *clk;
-       struct platform_device  *pdev;
- };
-@@ -175,24 +169,13 @@ static int bcm63xx_spi_setup(struct spi_
-       return 0;
- }
--/* Fill the TX FIFO with as many bytes as possible */
--static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
--{
--      u8 size;
--
--      /* Fill the Tx FIFO with as many bytes as possible */
--      size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
--              bs->fifo_size;
--      memcpy_toio(bs->tx_io, bs->tx_ptr, size);
--      bs->remaining_bytes -= size;
--}
--
--static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
--                                      struct spi_transfer *t)
-+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
- {
-       struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-       u16 msg_ctl;
-       u16 cmd;
-+      u8 rx_tail;
-+      unsigned int timeout = 0;
-       /* Disable the CMD_DONE interrupt */
-       bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-@@ -200,14 +183,8 @@ static unsigned int bcm63xx_txrx_bufs(st
-       dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-               t->tx_buf, t->rx_buf, t->len);
--      /* Transmitter is inhibited */
--      bs->tx_ptr = t->tx_buf;
--      bs->rx_ptr = t->rx_buf;
--
--      if (t->tx_buf) {
--              bs->remaining_bytes = t->len;
--              bcm63xx_spi_fill_tx_fifo(bs);
--      }
-+      if (t->tx_buf)
-+              memcpy_toio(bs->tx_io, t->tx_buf, t->len);
-       init_completion(&bs->done);
-@@ -239,7 +216,18 @@ static unsigned int bcm63xx_txrx_bufs(st
-       /* Enable the CMD_DONE interrupt */
-       bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
--      return t->len - bs->remaining_bytes;
-+      timeout = wait_for_completion_timeout(&bs->done, HZ);
-+      if (!timeout)
-+              return -ETIMEDOUT;
-+
-+      /* read out all data */
-+      rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+      /* Read out all the data */
-+      if (rx_tail)
-+              memcpy_fromio(t->rx_ptr, bs->rx_io, rx_tail);
-+
-+      return 0;
- }
- static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
-@@ -267,36 +255,41 @@ static int bcm63xx_spi_transfer_one(stru
-       struct spi_transfer *t;
-       struct spi_device *spi = m->spi;
-       int status = 0;
--      unsigned int timeout = 0;
-       list_for_each_entry(t, &m->transfers, transfer_list) {
--              unsigned int len = t->len;
--              u8 rx_tail;
--
-               status = bcm63xx_spi_check_transfer(spi, t);
-               if (status < 0)
-                       goto exit;
-+              /* we can only transfer one fifo worth of data */
-+              if (t->len > bs->fifo_size) {
-+                      dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
-+                              t->len, bs->fifo_size);
-+                      status = -EINVAL;
-+                      goto exit;
-+              }
-+
-+              /* CS will be deasserted directly after transfer */
-+              if (t->delay_usecs) {
-+                      dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
-+                      status = -EINVAL;
-+                      goto exit;
-+              }
-+
-+              if (!t->cs_change &&
-+                  !list_is_last(&t->transfer_list, &m->transfers)) {
-+                      dev_err(&spi->dev, "unable to keep CS asserted between transfers\n");
-+                      status = -EINVAL;
-+                      goto exit;
-+              }
-+
-               /* configure adapter for a new transfer */
-               bcm63xx_spi_setup_transfer(spi, t);
--              while (len) {
--                      /* send the data */
--                      len -= bcm63xx_txrx_bufs(spi, t);
--
--                      timeout = wait_for_completion_timeout(&bs->done, HZ);
--                      if (!timeout) {
--                              status = -ETIMEDOUT;
--                              goto exit;
--                      }
--
--                      /* read out all data */
--                      rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
--
--                      /* Read out all the data */
--                      if (rx_tail)
--                              memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
--              }
-+              /* send the data */
-+              status = bcm63xx_txrx_bufs(spi, t);
-+              if (status)
-+                      goto exit;
-               m->actual_length += t->len;
-       }
diff --git a/target/linux/brcm63xx/patches-3.8/002-spi-bcm63xx-fix-multi-transfer-messages.patch b/target/linux/brcm63xx/patches-3.8/002-spi-bcm63xx-fix-multi-transfer-messages.patch
deleted file mode 100644 (file)
index 85b8524..0000000
+++ /dev/null
@@ -1,240 +0,0 @@
-From 725e81d507b1098cd275d4e3333c77c4b750fa79 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Dec 2012 01:53:05 +0100
-Subject: [PATCH V2 2/2] spi/bcm63xx: work around inability to keep CS up
-
-This SPI controller does not support keeping CS asserted after sending
-a transfer.
-Since messages expected on this SPI controller are rather short, we can
-work around it for normal use cases by sending all transfers at once in
-a big full duplex stream.
-
-This means that we cannot change the speed between transfers if they
-require CS to be kept asserted, but these would have been rejected
-before anyway because of the inability of keeping CS asserted.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-V1 -> V2:
- * split out rejection logic into separate patch
- * fixed return type of bcm63xx_txrx_bufs()
- * slightly reworked bcm63xx_txrx_bufs, obsoleting one local variable
-
- drivers/spi/spi-bcm63xx.c |  134 +++++++++++++++++++++++++++++++++++----------
- 1 file changed, 106 insertions(+), 28 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -37,6 +37,8 @@
- #define PFX           KBUILD_MODNAME
-+#define BCM63XX_SPI_MAX_PREPEND               15
-+
- struct bcm63xx_spi {
-       struct completion       done;
-@@ -169,13 +171,17 @@ static int bcm63xx_spi_setup(struct spi_
-       return 0;
- }
--static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
-+                              unsigned int num_transfers)
- {
-       struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-       u16 msg_ctl;
-       u16 cmd;
-       u8 rx_tail;
--      unsigned int timeout = 0;
-+      unsigned int i, timeout = 0, prepend_len = 0, len = 0;
-+      struct spi_transfer *t = first;
-+      bool do_rx = false;
-+      bool do_tx = false;
-       /* Disable the CMD_DONE interrupt */
-       bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-@@ -183,19 +189,45 @@ static int bcm63xx_txrx_bufs(struct spi_
-       dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-               t->tx_buf, t->rx_buf, t->len);
--      if (t->tx_buf)
--              memcpy_toio(bs->tx_io, t->tx_buf, t->len);
-+      if (num_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
-+              prepend_len = t->len;
-+
-+      /* prepare the buffer */
-+      for (i = 0; i < num_transfers; i++) {
-+              if (t->tx_buf) {
-+                      do_tx = true;
-+                      memcpy_toio(bs->tx_io + len, t->tx_buf, t->len);
-+
-+                      /* don't prepend more than one tx */
-+                      if (t != first)
-+                              prepend_len = 0;
-+              }
-+
-+              if (t->rx_buf) {
-+                      do_rx = true;
-+                      /* prepend is half-duplex write only */
-+                      if (t == first)
-+                              prepend_len = 0;
-+              }
-+
-+              len += t->len;
-+
-+              t = list_entry(t->transfer_list.next, struct spi_transfer,
-+                             transfer_list);
-+      }
-+
-+      len -= prepend_len;
-       init_completion(&bs->done);
-       /* Fill in the Message control register */
--      msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-+      msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
--      if (t->rx_buf && t->tx_buf)
-+      if (do_rx && do_tx && prepend_len == 0)
-               msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
--      else if (t->rx_buf)
-+      else if (do_rx)
-               msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
--      else if (t->tx_buf)
-+      else if (do_tx)
-               msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
-       switch (bs->msg_ctl_width) {
-@@ -209,7 +241,7 @@ static int bcm63xx_txrx_bufs(struct spi_
-       /* Issue the transfer */
-       cmd = SPI_CMD_START_IMMEDIATE;
--      cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+      cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-       cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
-       bcm_spi_writew(bs, cmd, SPI_CMD);
-@@ -223,9 +255,25 @@ static int bcm63xx_txrx_bufs(struct spi_
-       /* read out all data */
-       rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+      if (do_rx && rx_tail != len)
-+              return -EIO;
-+
-+      if (!rx_tail)
-+              return 0;
-+
-+      len = 0;
-+      t = first;
-       /* Read out all the data */
--      if (rx_tail)
--              memcpy_fromio(t->rx_ptr, bs->rx_io, rx_tail);
-+      for (i = 0; i < num_transfers; i++) {
-+              if (t->rx_buf)
-+                      memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
-+
-+              if (t != first || prepend_len == 0)
-+                      len += t->len;
-+
-+              t = list_entry(t->transfer_list.next, struct spi_transfer,
-+                             transfer_list);
-+      }
-       return 0;
- }
-@@ -252,46 +300,76 @@ static int bcm63xx_spi_transfer_one(stru
-                                       struct spi_message *m)
- {
-       struct bcm63xx_spi *bs = spi_master_get_devdata(master);
--      struct spi_transfer *t;
-+      struct spi_transfer *t, *first = NULL;
-       struct spi_device *spi = m->spi;
-       int status = 0;
-+      unsigned int n_transfers = 0, total_len = 0;
-+      bool can_use_prepend = false;
-+      /*
-+       * This SPI controller does not support keeping CS active after a
-+       * transfer.
-+       * Work around this by merging as many transfers we can into one big
-+       * full-duplex transfers.
-+       */
-       list_for_each_entry(t, &m->transfers, transfer_list) {
-               status = bcm63xx_spi_check_transfer(spi, t);
-               if (status < 0)
-                       goto exit;
-+              if (!first)
-+                      first = t;
-+
-+              n_transfers++;
-+              total_len += t->len;
-+
-+              if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
-+                  first->len <= BCM63XX_SPI_MAX_PREPEND)
-+                      can_use_prepend = true;
-+              else if (can_use_prepend && t->tx_buf)
-+                      can_use_prepend = false;
-+
-               /* we can only transfer one fifo worth of data */
--              if (t->len > bs->fifo_size) {
-+              if ((can_use_prepend &&
-+                   total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
-+                  (!can_use_prepend && total_len > bs->fifo_size)) {
-                       dev_err(&spi->dev, "unable to do transfers larger than FIFO size (%i > %i)\n",
--                              t->len, bs->fifo_size);
-+                              total_len, bs->fifo_size);
-                       status = -EINVAL;
-                       goto exit;
-               }
--              /* CS will be deasserted directly after transfer */
--              if (t->delay_usecs) {
--                      dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
-+              /* all combined transfers have to have the same speed */
-+              if (t->speed_hz != first->speed_hz) {
-+                      dev_err(&spi->dev, "unable to change speed between transfers\n");
-                       status = -EINVAL;
-                       goto exit;
-               }
--              if (!t->cs_change &&
--                  !list_is_last(&t->transfer_list, &m->transfers)) {
--                      dev_err(&spi->dev, "unable to keep CS asserted between transfers\n");
-+              /* CS will be deasserted directly after transfer */
-+              if (t->delay_usecs) {
-+                      dev_err(&spi->dev, "unable to keep CS asserted after transfer\n");
-                       status = -EINVAL;
-                       goto exit;
-               }
--              /* configure adapter for a new transfer */
--              bcm63xx_spi_setup_transfer(spi, t);
--
--              /* send the data */
--              status = bcm63xx_txrx_bufs(spi, t);
--              if (status)
--                      goto exit;
--
--              m->actual_length += t->len;
-+              if (t->cs_change ||
-+                  list_is_last(&t->transfer_list, &m->transfers)) {
-+                      /* configure adapter for a new transfer */
-+                      bcm63xx_spi_setup_transfer(spi, first);
-+
-+                      /* send the data */
-+                      status = bcm63xx_txrx_bufs(spi, first, n_transfers);
-+                      if (status)
-+                              goto exit;
-+
-+                      m->actual_length += total_len;
-+
-+                      first = NULL;
-+                      n_transfers = 0;
-+                      total_len = 0;
-+                      can_use_prepend = false;
-+              }
-       }
- exit:
-       m->status = status;
diff --git a/target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch b/target/linux/brcm63xx/patches-3.8/003-spi-bcm63xx-Remove-unused-variable.patch
deleted file mode 100644 (file)
index beda129..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-From 2a26efda4d16f7d25f1c55e5c387fa3d7d18e9af Mon Sep 17 00:00:00 2001
-From: Kevin Cernekee <cernekee@gmail.com>
-Date: Sat, 14 Jul 2012 23:25:03 -0700
-Subject: [PATCH 01/12] spi/bcm63xx: Remove unused variable
-
-This fixes the following warning:
-
-drivers/spi/spi-bcm63xx.c: In function 'bcm63xx_spi_setup':
-drivers/spi/spi-bcm63xx.c:157:6: warning: unused variable 'ret'
-
-Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
----
- drivers/spi/spi-bcm63xx.c |    1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -152,7 +152,6 @@ static void bcm63xx_spi_setup_transfer(s
- static int bcm63xx_spi_setup(struct spi_device *spi)
- {
-       struct bcm63xx_spi *bs;
--      int ret;
-       bs = spi_master_get_devdata(spi->master);
diff --git a/target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch b/target/linux/brcm63xx/patches-3.8/004-spi-bcm63xx-don-t-disable-non-enabled-clocks-in-prob.patch
deleted file mode 100644 (file)
index 0a03707..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From f32b46ec9c307753e2418a0f5df1b5cd066b1394 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:27:43 +0100
-Subject: [PATCH 02/12] spi/bcm63xx: don't disable non enabled clocks in probe
- error path
-
-When msg_ctl_width is set to an invalid value we try to disable the
-clock despite it never being enabled. Fix it by jumping to the correct
-label.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -489,7 +489,7 @@ static int bcm63xx_spi_probe(struct plat
-       default:
-               dev_err(dev, "unsupported MSG_CTL width: %d\n",
-                        bs->msg_ctl_width);
--              goto out_clk_disable;
-+              goto out_err;
-       }
-       /* Initialize hardware */
diff --git a/target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch b/target/linux/brcm63xx/patches-3.8/005-spi-bcm63xx-properly-prepare-clocks-before-enabling-.patch
deleted file mode 100644 (file)
index b75a57c..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From e504d3ed9b35f43e61cf239b103667d87cd7bf3c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 10 Sep 2012 01:26:55 +0200
-Subject: [PATCH 03/12] spi/bcm63xx: properly prepare clocks before enabling
- them
-
-Use proper clk_prepare/unprepare calls in preparation for switching
-to the generic clock framework.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |   10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -493,7 +493,7 @@ static int bcm63xx_spi_probe(struct plat
-       }
-       /* Initialize hardware */
--      clk_enable(bs->clk);
-+      clk_prepare_enable(bs->clk);
-       bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-       /* register and we are done */
-@@ -509,7 +509,7 @@ static int bcm63xx_spi_probe(struct plat
-       return 0;
- out_clk_disable:
--      clk_disable(clk);
-+      clk_disable_unprepare(clk);
- out_err:
-       platform_set_drvdata(pdev, NULL);
-       spi_master_put(master);
-@@ -530,7 +530,7 @@ static int bcm63xx_spi_remove(struct pla
-       bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-       /* HW shutdown */
--      clk_disable(bs->clk);
-+      clk_disable_unprepare(bs->clk);
-       clk_put(bs->clk);
-       platform_set_drvdata(pdev, 0);
-@@ -549,7 +549,7 @@ static int bcm63xx_spi_suspend(struct de
-       spi_master_suspend(master);
--      clk_disable(bs->clk);
-+      clk_disable_unprepare(bs->clk);
-       return 0;
- }
-@@ -560,7 +560,7 @@ static int bcm63xx_spi_resume(struct dev
-                       platform_get_drvdata(to_platform_device(dev));
-       struct bcm63xx_spi *bs = spi_master_get_devdata(master);
--      clk_enable(bs->clk);
-+      clk_prepare_enable(bs->clk);
-       spi_master_resume(master);
diff --git a/target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch b/target/linux/brcm63xx/patches-3.8/006-spi-bcm63xx-remove-duplicated-mode-bits-check.patch
deleted file mode 100644 (file)
index d387300..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-From 3abf34d4e0460bb098fabe3cc8207108bae1905a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:40:26 +0100
-Subject: [PATCH 04/12] spi/bcm63xx: remove duplicated mode bits check
-
-The spi subsystem already checks the mode bits before calling setup.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    6 ------
- 1 file changed, 6 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -158,12 +158,6 @@ static int bcm63xx_spi_setup(struct spi_
-       if (!spi->bits_per_word)
-               spi->bits_per_word = 8;
--      if (spi->mode & ~MODEBITS) {
--              dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
--                      __func__, spi->mode & ~MODEBITS);
--              return -EINVAL;
--      }
--
-       dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-               __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
diff --git a/target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch b/target/linux/brcm63xx/patches-3.8/007-spi-bcm63xx-remove-unneeded-debug-message.patch
deleted file mode 100644 (file)
index a7fae94..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From ee18b0ac561afb9dd7d87a4217e80151a7e29dfc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:42:22 +0100
-Subject: [PATCH 05/12] spi/bcm63xx: remove unneeded debug message
-
-The spi subsystem already provides this info in a more extensive
-debug print except for the nsecs/bit - which wasn't calculated anyway
-and fixed to 0.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -158,9 +158,6 @@ static int bcm63xx_spi_setup(struct spi_
-       if (!spi->bits_per_word)
-               spi->bits_per_word = 8;
--      dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
--              __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
--
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch b/target/linux/brcm63xx/patches-3.8/008-spi-bcm63xx-remove-unused-variable-bs-from-bcm63xx_s.patch
deleted file mode 100644 (file)
index 81ea919..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-From 30151fe21befa84d9cd27d63f1bf3973988c811e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:47:19 +0100
-Subject: [PATCH 06/12] spi/bcm63xx: remove unused variable bs from
- bcm63xx_spi_setup
-
-It is only written, but never read.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    4 ----
- 1 file changed, 4 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -151,10 +151,6 @@ static void bcm63xx_spi_setup_transfer(s
- static int bcm63xx_spi_setup(struct spi_device *spi)
- {
--      struct bcm63xx_spi *bs;
--
--      bs = spi_master_get_devdata(spi->master);
--
-       if (!spi->bits_per_word)
-               spi->bits_per_word = 8;
diff --git a/target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch b/target/linux/brcm63xx/patches-3.8/009-spi-bcm63xx-check-spi-bits_per_word-in-spi_setup.patch
deleted file mode 100644 (file)
index 49a7ac2..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-From 13a364be644ed9b4666d452756556bb98afdcc56 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:48:27 +0100
-Subject: [PATCH 07/12] spi/bcm63xx: check spi bits_per_word in spi_setup
-
-Instead of fixing up the bits_per_word (which the spi subsystem already
-does for us), check it for supported values.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    7 +++++--
- 1 file changed, 5 insertions(+), 2 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -151,8 +151,11 @@ static void bcm63xx_spi_setup_transfer(s
- static int bcm63xx_spi_setup(struct spi_device *spi)
- {
--      if (!spi->bits_per_word)
--              spi->bits_per_word = 8;
-+      if (spi->bits_per_word != 8) {
-+              dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-+                      __func__, spi->bits_per_word);
-+              return -EINVAL;
-+      }
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch b/target/linux/brcm63xx/patches-3.8/010-spi-bcm63xx-simplify-bcm63xx_spi_check_transfer.patch
deleted file mode 100644 (file)
index 57c1e46..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From d69ac73da38f0d16cc6b4524cd734b907db6eab8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:51:10 +0100
-Subject: [PATCH 08/12] spi/bcm63xx: simplify bcm63xx_spi_check_transfer
-
-bcm63xx_spi_check_transfer is only called from one place that has
-t always set, so directly check the transfer's bits_per_word.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -96,12 +96,9 @@ static const unsigned bcm63xx_spi_freq_t
- static int bcm63xx_spi_check_transfer(struct spi_device *spi,
-                                       struct spi_transfer *t)
- {
--      u8 bits_per_word;
--
--      bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
--      if (bits_per_word != 8) {
-+      if (t->bits_per_word != 8) {
-               dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
--                      __func__, bits_per_word);
-+                      __func__, t->bits_per_word);
-               return -EINVAL;
-       }
diff --git a/target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch b/target/linux/brcm63xx/patches-3.8/011-spi-bcm63xx-remove-spi-chip-select-validity-check.patch
deleted file mode 100644 (file)
index 4f1a1cc..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 9c5a988562468823a5e2973f04134a8bd97e7718 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:53:16 +0100
-Subject: [PATCH 09/12] spi/bcm63xx: remove spi chip select validity check
-
-The check would belong in bcm63xx_spi_setup if the spi subsystem
-weren't already doing the check for us, so just drop it.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    6 ------
- 1 file changed, 6 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -102,12 +102,6 @@ static int bcm63xx_spi_check_transfer(st
-               return -EINVAL;
-       }
--      if (spi->chip_select > spi->master->num_chipselect) {
--              dev_err(&spi->dev, "%s, unsupported slave %d\n",
--                      __func__, spi->chip_select);
--              return -EINVAL;
--      }
--
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch b/target/linux/brcm63xx/patches-3.8/012-spi-bcm63xx-inline-bcm63xx_spi_check_transfer.patch
deleted file mode 100644 (file)
index f684d83..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From 3fffc5f76c830c375692a67948734168ee4c516a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 13:59:30 +0100
-Subject: [PATCH 10/12] spi/bcm63xx: inline bcm63xx_spi_check_transfer
-
-It only does one check, so just do the check directly in the caller.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |   19 +++++--------------
- 1 file changed, 5 insertions(+), 14 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -93,18 +93,6 @@ static const unsigned bcm63xx_spi_freq_t
-       {   391000, SPI_CLK_0_391MHZ }
- };
--static int bcm63xx_spi_check_transfer(struct spi_device *spi,
--                                      struct spi_transfer *t)
--{
--      if (t->bits_per_word != 8) {
--              dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
--                      __func__, t->bits_per_word);
--              return -EINVAL;
--      }
--
--      return 0;
--}
--
- static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
-                                     struct spi_transfer *t)
- {
-@@ -293,9 +281,12 @@ static int bcm63xx_spi_transfer_one(stru
-        * full-duplex transfers.
-        */
-       list_for_each_entry(t, &m->transfers, transfer_list) {
--              status = bcm63xx_spi_check_transfer(spi, t);
--              if (status < 0)
-+              if (t->bits_per_word != 8) {
-+                      dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-+                              __func__, t->bits_per_word);
-+                      status = -EINVAL;
-                       goto exit;
-+              }
-               if (!first)
-                       first = t;
diff --git a/target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch b/target/linux/brcm63xx/patches-3.8/013-spi-bcm63xx-inline-hz-usage-in-bcm63xx_spi_setup_tra.patch
deleted file mode 100644 (file)
index fba37d5..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-From 2646be877afc663d1688a2add8386b027c9d7e31 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 14:08:06 +0100
-Subject: [PATCH 11/12] spi/bcm63xx: inline hz usage in
- bcm63xx_spi_setup_transfer
-
-bcm63xx_spi_setup_transfer is called from only one place, and that has
-t always set, to hz will always be t->speed_hz - just use it directly in
-the two places instead of moving it in a local variable.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |    7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -97,15 +97,12 @@ static void bcm63xx_spi_setup_transfer(s
-                                     struct spi_transfer *t)
- {
-       struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
--      u32 hz;
-       u8 clk_cfg, reg;
-       int i;
--      hz = (t) ? t->speed_hz : spi->max_speed_hz;
--
-       /* Find the closest clock configuration */
-       for (i = 0; i < SPI_CLK_MASK; i++) {
--              if (hz >= bcm63xx_spi_freq_table[i][0]) {
-+              if (t->speed_hz >= bcm63xx_spi_freq_table[i][0]) {
-                       clk_cfg = bcm63xx_spi_freq_table[i][1];
-                       break;
-               }
-@@ -122,7 +119,7 @@ static void bcm63xx_spi_setup_transfer(s
-       bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
-       dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
--              clk_cfg, hz);
-+              clk_cfg, t->speed_hz);
- }
- /* the spi->mode bits understood by this driver: */
diff --git a/target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch b/target/linux/brcm63xx/patches-3.8/014-spi-bcm63xx-use-devm_ioremap_resource.patch
deleted file mode 100644 (file)
index 82fbe6c..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 95af2d7751d31ea07b7a0d8ec7030f6c62df0ae2 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 11 Mar 2013 14:20:33 +0100
-Subject: [PATCH 12/12] spi/bcm63xx: use devm_ioremap_resource()
-
-Use devm_ioremap_resource() which provides its own error messages.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/spi/spi-bcm63xx.c |   15 +++------------
- 1 file changed, 3 insertions(+), 12 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -412,18 +412,9 @@ static int bcm63xx_spi_probe(struct plat
-       platform_set_drvdata(pdev, master);
-       bs->pdev = pdev;
--      if (!devm_request_mem_region(&pdev->dev, r->start,
--                                      resource_size(r), PFX)) {
--              dev_err(dev, "iomem request failed\n");
--              ret = -ENXIO;
--              goto out_err;
--      }
--
--      bs->regs = devm_ioremap_nocache(&pdev->dev, r->start,
--                                                      resource_size(r));
--      if (!bs->regs) {
--              dev_err(dev, "unable to ioremap regs\n");
--              ret = -ENOMEM;
-+      bs->regs = devm_ioremap_resource(&pdev->dev, r);
-+      if (IS_ERR(bs->regs)) {
-+              ret = PTR_ERR(bs->regs);
-               goto out_err;
-       }
diff --git a/target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch b/target/linux/brcm63xx/patches-3.8/015-spi-bcm63xx-remove-unused-speed_hz-member-variable.patch
deleted file mode 100644 (file)
index d7b9327..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From 5ff6b05a18295fa7e03de0fdf32d681a90b69df5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 30 Mar 2013 10:26:55 +0100
-Subject: [PATCH] spi/bcm63xx: remove unused speed_hz member variable
-
-speed_hz is a write only member, so we can safely remove it and its
-generation. Also fixes the missing clk_put after getting the periph
-clock.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-spi.c                          |   11 -----------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h |    1 -
- drivers/spi/spi-bcm63xx.c                            |    2 --
- 3 files changed, 14 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -85,20 +85,9 @@ static struct platform_device bcm63xx_sp
- int __init bcm63xx_spi_register(void)
- {
--      struct clk *periph_clk;
--
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
-               return -ENODEV;
--      periph_clk = clk_get(NULL, "periph");
--      if (IS_ERR(periph_clk)) {
--              pr_err("unable to get periph clock\n");
--              return -ENODEV;
--      }
--
--      /* Set bus frequency */
--      spi_pdata.speed_hz = clk_get_rate(periph_clk);
--
-       spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
-       spi_resources[0].end = spi_resources[0].start;
-       spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -13,7 +13,6 @@ struct bcm63xx_spi_pdata {
-       unsigned int    msg_ctl_width;
-       int             bus_num;
-       int             num_chipselect;
--      u32             speed_hz;
- };
- enum bcm63xx_regs_spi {
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -46,7 +46,6 @@ struct bcm63xx_spi {
-       int                     irq;
-       /* Platform data */
--      u32                     speed_hz;
-       unsigned                fifo_size;
-       unsigned int            msg_type_shift;
-       unsigned int            msg_ctl_width;
-@@ -436,7 +435,6 @@ static int bcm63xx_spi_probe(struct plat
-       master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
-       master->transfer_one_message = bcm63xx_spi_transfer_one;
-       master->mode_bits = MODEBITS;
--      bs->speed_hz = pdata->speed_hz;
-       bs->msg_type_shift = pdata->msg_type_shift;
-       bs->msg_ctl_width = pdata->msg_ctl_width;
-       bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
diff --git a/target/linux/brcm63xx/patches-3.8/016-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch b/target/linux/brcm63xx/patches-3.8/016-MIPS-BCM63XX-make-nvram-checksum-failure-non-fatal.patch
deleted file mode 100644 (file)
index 53161a9..0000000
+++ /dev/null
@@ -1,74 +0,0 @@
-From 152addd3a965759b69fbdb9a76526f1f5070bc9a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 12 Feb 2013 22:00:10 +0100
-Subject: [PATCH] MIPS: BCM63XX: make nvram checksum failure non fatal
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-Some vendors modify the nvram layout moving the checksum to a different
-place or dropping entirely, so reduce the checksum failure to a warning.
-
-Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-
-I'm not sure if it should be that "loud" (pr_warn) because users can't
-actually do anything to fix it, so maybe pr_debug would be fine, too.
-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    5 +----
- arch/mips/bcm63xx/nvram.c                          |    7 +++----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h |    4 +---
- 3 files changed, 5 insertions(+), 11 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -745,10 +745,7 @@ void __init board_prom_init(void)
-               strcpy(cfe_version, "unknown");
-       printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
--      if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET)) {
--              printk(KERN_ERR PFX "invalid nvram checksum\n");
--              return;
--      }
-+      bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
-       board_name = bcm63xx_nvram_get_name();
-       /* find board by name */
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -38,7 +38,7 @@ struct bcm963xx_nvram {
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
--int __init bcm63xx_nvram_init(void *addr)
-+void __init bcm63xx_nvram_init(void *addr)
- {
-       unsigned int check_len;
-       u32 crc, expected_crc;
-@@ -60,9 +60,8 @@ int __init bcm63xx_nvram_init(void *addr
-       crc = crc32_le(~0, (u8 *)&nvram, check_len);
-       if (crc != expected_crc)
--              return -EINVAL;
--
--      return 0;
-+              pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",
-+                      expected_crc, crc);
- }
- u8 *bcm63xx_nvram_get_name(void)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-@@ -9,10 +9,8 @@
-  *
-  * Initialized the local nvram copy from the target address and checks
-  * its checksum.
-- *
-- * Returns 0 on success.
-  */
--int __init bcm63xx_nvram_init(void *nvram);
-+void bcm63xx_nvram_init(void *nvram);
- /**
-  * bcm63xx_nvram_get_name() - returns the board name according to nvram
diff --git a/target/linux/brcm63xx/patches-3.8/017-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch b/target/linux/brcm63xx/patches-3.8/017-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch
deleted file mode 100644 (file)
index 584bc48..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From 76d82677cb010b28346aa4c7aa9d36d94916392b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 8 May 2012 09:39:01 +0200
-Subject: [PATCH] Revert "MIPS: BCM63XX: Call board_register_device from
- device_initcall()"
-
-This commit causes a race between PCI scan and SSB fallback SPROM handler
-registration, causing the wifi to not work on slower systems. The only
-subsystem touched from board_register_devices is platform device
-registration, which is safe as an arch init call.
-
-This reverts commit d64ed7ada2f689d2c62af1892ca55e47d3653e36.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
-
-This patch is in OpenWrt since ages, and we never encountered any issues
-from this revert.
-
- arch/mips/bcm63xx/setup.c |    2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void
-       return board_register_devices();
- }
--device_initcall(bcm63xx_register_devices);
-+arch_initcall(bcm63xx_register_devices);
diff --git a/target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch b/target/linux/brcm63xx/patches-3.8/018-MIPS-BCM63XX-merge-bcm63xx_clk.h-into-bcm63xx-clk.c.patch
deleted file mode 100644 (file)
index c3dedb4..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 715d03e5409fac9cbe76fd802db49ca15158378f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 30 Mar 2013 20:31:48 +0100
-Subject: [PATCH] MIPS: BCM63XX: merge bcm63xx_clk.h into bcm63xx/clk.c
-
-All the header file does is provide the internal structure of clk,
-which shouldn't be used by anyone except clk.c itself anyway.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c                          |    8 +++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h |   11 -----------
- drivers/tty/serial/bcm63xx_uart.c                |    1 -
- 3 files changed, 7 insertions(+), 13 deletions(-)
- delete mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -15,7 +15,13 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_reset.h>
--#include <bcm63xx_clk.h>
-+
-+struct clk {
-+      void            (*set)(struct clk *, int);
-+      unsigned int    rate;
-+      unsigned int    usage;
-+      int             id;
-+};
- static DEFINE_MUTEX(clocks_mutex);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h
-+++ /dev/null
-@@ -1,11 +0,0 @@
--#ifndef BCM63XX_CLK_H_
--#define BCM63XX_CLK_H_
--
--struct clk {
--      void            (*set)(struct clk *, int);
--      unsigned int    rate;
--      unsigned int    usage;
--      int             id;
--};
--
--#endif /* ! BCM63XX_CLK_H_ */
---- a/drivers/tty/serial/bcm63xx_uart.c
-+++ b/drivers/tty/serial/bcm63xx_uart.c
-@@ -30,7 +30,6 @@
- #include <linux/serial.h>
- #include <linux/serial_core.h>
--#include <bcm63xx_clk.h>
- #include <bcm63xx_irq.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
diff --git a/target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch b/target/linux/brcm63xx/patches-3.8/019-bcm63xx_enet-use-managed-io-memory-allocations.patch
deleted file mode 100644 (file)
index 717bcab..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From 80b0356aea30e9fc9e075d31c2bf37e7cbfea8c9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 10 Mar 2013 13:59:55 +0100
-Subject: [PATCH 1/3] bcm63xx_enet: use managed io memory allocations
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |   43 +++++---------------------
- 1 file changed, 7 insertions(+), 36 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1620,7 +1620,6 @@ static int bcm_enet_probe(struct platfor
-       struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
-       struct mii_bus *bus;
-       const char *clk_name;
--      unsigned int iomem_size;
-       int i, ret;
-       /* stop if shared driver failed, assume driver->probe will be
-@@ -1645,17 +1644,12 @@ static int bcm_enet_probe(struct platfor
-       if (ret)
-               goto out;
--      iomem_size = resource_size(res_mem);
--      if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) {
--              ret = -EBUSY;
--              goto out;
--      }
--
--      priv->base = ioremap(res_mem->start, iomem_size);
-+      priv->base = devm_request_and_ioremap(&pdev->dev, res_mem);
-       if (priv->base == NULL) {
-               ret = -ENOMEM;
--              goto out_release_mem;
-+              goto out;
-       }
-+
-       dev->irq = priv->irq = res_irq->start;
-       priv->irq_rx = res_irq_rx->start;
-       priv->irq_tx = res_irq_tx->start;
-@@ -1675,7 +1669,7 @@ static int bcm_enet_probe(struct platfor
-       priv->mac_clk = clk_get(&pdev->dev, clk_name);
-       if (IS_ERR(priv->mac_clk)) {
-               ret = PTR_ERR(priv->mac_clk);
--              goto out_unmap;
-+              goto out;
-       }
-       clk_enable(priv->mac_clk);
-@@ -1815,12 +1809,6 @@ out_uninit_hw:
- out_put_clk_mac:
-       clk_disable(priv->mac_clk);
-       clk_put(priv->mac_clk);
--
--out_unmap:
--      iounmap(priv->base);
--
--out_release_mem:
--      release_mem_region(res_mem->start, iomem_size);
- out:
-       free_netdev(dev);
-       return ret;
-@@ -1834,7 +1822,6 @@ static int bcm_enet_remove(struct platfo
- {
-       struct bcm_enet_priv *priv;
-       struct net_device *dev;
--      struct resource *res;
-       /* stop netdevice */
-       dev = platform_get_drvdata(pdev);
-@@ -1857,11 +1844,6 @@ static int bcm_enet_remove(struct platfo
-                                      bcm_enet_mdio_write_mii);
-       }
--      /* release device resources */
--      iounmap(priv->base);
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      release_mem_region(res->start, resource_size(res));
--
-       /* disable hw block clocks */
-       if (priv->phy_clk) {
-               clk_disable(priv->phy_clk);
-@@ -1890,31 +1872,20 @@ struct platform_driver bcm63xx_enet_driv
- static int bcm_enet_shared_probe(struct platform_device *pdev)
- {
-       struct resource *res;
--      unsigned int iomem_size;
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res)
-               return -ENODEV;
--      iomem_size = resource_size(res);
--      if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma"))
--              return -EBUSY;
--
--      bcm_enet_shared_base = ioremap(res->start, iomem_size);
--      if (!bcm_enet_shared_base) {
--              release_mem_region(res->start, iomem_size);
-+      bcm_enet_shared_base = devm_request_and_ioremap(&pdev->dev, res);
-+      if (!bcm_enet_shared_base)
-               return -ENOMEM;
--      }
-+
-       return 0;
- }
- static int bcm_enet_shared_remove(struct platform_device *pdev)
- {
--      struct resource *res;
--
--      iounmap(bcm_enet_shared_base);
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      release_mem_region(res->start, resource_size(res));
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch b/target/linux/brcm63xx/patches-3.8/020-bcm63xx_enet-use-managed-memory-allocations.patch
deleted file mode 100644 (file)
index 7c356d5..0000000
+++ /dev/null
@@ -1,42 +0,0 @@
-From 451a609ca472f80838df056689359c5486d832c1 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 10 Mar 2013 14:05:01 +0100
-Subject: [PATCH 2/3] bcm63xx_enet: use managed memory allocations
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |    8 +++-----
- 1 file changed, 3 insertions(+), 5 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1728,7 +1728,8 @@ static int bcm_enet_probe(struct platfor
-                * if a slave is not present on hw */
-               bus->phy_mask = ~(1 << priv->phy_id);
--              bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
-+              bus->irq = devm_kzalloc(&pdev->dev, sizeof(int) * PHY_MAX_ADDR,
-+                                      GFP_KERNEL);
-               if (!bus->irq) {
-                       ret = -ENOMEM;
-                       goto out_free_mdio;
-@@ -1789,10 +1790,8 @@ static int bcm_enet_probe(struct platfor
-       return 0;
- out_unregister_mdio:
--      if (priv->mii_bus) {
-+      if (priv->mii_bus)
-               mdiobus_unregister(priv->mii_bus);
--              kfree(priv->mii_bus->irq);
--      }
- out_free_mdio:
-       if (priv->mii_bus)
-@@ -1833,7 +1832,6 @@ static int bcm_enet_remove(struct platfo
-       if (priv->has_phy) {
-               mdiobus_unregister(priv->mii_bus);
--              kfree(priv->mii_bus->irq);
-               mdiobus_free(priv->mii_bus);
-       } else {
-               struct bcm63xx_enet_platform_data *pd;
diff --git a/target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch b/target/linux/brcm63xx/patches-3.8/021-bcm63xx_enet-properly-prepare-unprepare-clocks-befor.patch
deleted file mode 100644 (file)
index aac70f9..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
-From 8d6b746129f11efe4ba69aeb2c982359d33c6ec3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 10 Sep 2012 01:28:47 +0200
-Subject: [PATCH 3/3] bcm63xx_enet: properly prepare/unprepare clocks
- before/after usage
-
-Use clk_prepare_enable/disable_unprepare calls in preparation for
-switching to the generic clock framework.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |   12 ++++++------
- 1 file changed, 6 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1671,7 +1671,7 @@ static int bcm_enet_probe(struct platfor
-               ret = PTR_ERR(priv->mac_clk);
-               goto out;
-       }
--      clk_enable(priv->mac_clk);
-+      clk_prepare_enable(priv->mac_clk);
-       /* initialize default and fetch platform data */
-       priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-@@ -1700,7 +1700,7 @@ static int bcm_enet_probe(struct platfor
-                       priv->phy_clk = NULL;
-                       goto out_put_clk_mac;
-               }
--              clk_enable(priv->phy_clk);
-+              clk_prepare_enable(priv->phy_clk);
-       }
-       /* do minimal hardware init to be able to probe mii bus */
-@@ -1801,12 +1801,12 @@ out_uninit_hw:
-       /* turn off mdc clock */
-       enet_writel(priv, 0, ENET_MIISC_REG);
-       if (priv->phy_clk) {
--              clk_disable(priv->phy_clk);
-+              clk_disable_unprepare(priv->phy_clk);
-               clk_put(priv->phy_clk);
-       }
- out_put_clk_mac:
--      clk_disable(priv->mac_clk);
-+      clk_disable_unprepare(priv->mac_clk);
-       clk_put(priv->mac_clk);
- out:
-       free_netdev(dev);
-@@ -1844,10 +1844,10 @@ static int bcm_enet_remove(struct platfo
-       /* disable hw block clocks */
-       if (priv->phy_clk) {
--              clk_disable(priv->phy_clk);
-+              clk_disable_unprepare(priv->phy_clk);
-               clk_put(priv->phy_clk);
-       }
--      clk_disable(priv->mac_clk);
-+      clk_disable_unprepare(priv->mac_clk);
-       clk_put(priv->mac_clk);
-       platform_set_drvdata(pdev, NULL);
diff --git a/target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch b/target/linux/brcm63xx/patches-3.8/022-MIPS-BCM63XX-remove-duplicate-spi-register-definitio.patch
deleted file mode 100644 (file)
index 50bbb93..0000000
+++ /dev/null
@@ -1,166 +0,0 @@
-From e1a3ace7260fad338a76595b116a6bf5b5627aa2 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 7 Mar 2013 12:20:10 +0100
-Subject: [PATCH 1/7] MIPS: BCM63XX: remove duplicate spi register definitions
-
-BCM6338 and BCM6348, and BCM6358 and everything after that share the
-same register layout. To not have to redefine them for each new chip
-and keep the code size small, only use the definitions for the first
-chip with the certain layout.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-spi.c                        |   24 +++---------
- .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h     |   10 +----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h  |   40 +-------------------
- 3 files changed, 10 insertions(+), 64 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -22,10 +22,6 @@
- /*
-  * register offsets
-  */
--static const unsigned long bcm6338_regs_spi[] = {
--      __GEN_SPI_REGS_TABLE(6338)
--};
--
- static const unsigned long bcm6348_regs_spi[] = {
-       __GEN_SPI_REGS_TABLE(6348)
- };
-@@ -34,23 +30,15 @@ static const unsigned long bcm6358_regs_
-       __GEN_SPI_REGS_TABLE(6358)
- };
--static const unsigned long bcm6368_regs_spi[] = {
--      __GEN_SPI_REGS_TABLE(6368)
--};
--
- const unsigned long *bcm63xx_regs_spi;
- EXPORT_SYMBOL(bcm63xx_regs_spi);
- static __init void bcm63xx_spi_regs_init(void)
- {
--      if (BCMCPU_IS_6338())
--              bcm63xx_regs_spi = bcm6338_regs_spi;
--      if (BCMCPU_IS_6348())
-+      if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-               bcm63xx_regs_spi = bcm6348_regs_spi;
--      if (BCMCPU_IS_6358())
-+      if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
-               bcm63xx_regs_spi = bcm6358_regs_spi;
--      if (BCMCPU_IS_6368())
--              bcm63xx_regs_spi = bcm6368_regs_spi;
- }
- #else
- static __init void bcm63xx_spi_regs_init(void) { }
-@@ -93,10 +81,10 @@ int __init bcm63xx_spi_register(void)
-       spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
--              spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
--              spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
--              spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT;
--              spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
-+              spi_resources[0].end += BCM_6348_RSET_SPI_SIZE - 1;
-+              spi_pdata.fifo_size = SPI_6348_MSG_DATA_SIZE;
-+              spi_pdata.msg_type_shift = SPI_6348_MSG_TYPE_SHIFT;
-+              spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
-       }
-       if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -71,18 +71,12 @@ static inline unsigned long bcm63xx_spir
-       return bcm63xx_regs_spi[reg];
- #else
--#ifdef CONFIG_BCM63XX_CPU_6338
--      __GEN_SPI_RSET(6338)
--#endif
--#ifdef CONFIG_BCM63XX_CPU_6348
-+#if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
-       __GEN_SPI_RSET(6348)
- #endif
--#ifdef CONFIG_BCM63XX_CPU_6358
-+#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6368)
-       __GEN_SPI_RSET(6358)
- #endif
--#ifdef CONFIG_BCM63XX_CPU_6368
--      __GEN_SPI_RSET(6368)
--#endif
- #endif
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1223,24 +1223,7 @@
-  * _REG relative to RSET_SPI
-  *************************************************************************/
--/* BCM 6338 SPI core */
--#define SPI_6338_CMD                  0x00    /* 16-bits register */
--#define SPI_6338_INT_STATUS           0x02
--#define SPI_6338_INT_MASK_ST          0x03
--#define SPI_6338_INT_MASK             0x04
--#define SPI_6338_ST                   0x05
--#define SPI_6338_CLK_CFG              0x06
--#define SPI_6338_FILL_BYTE            0x07
--#define SPI_6338_MSG_TAIL             0x09
--#define SPI_6338_RX_TAIL              0x0b
--#define SPI_6338_MSG_CTL              0x40    /* 8-bits register */
--#define SPI_6338_MSG_CTL_WIDTH                8
--#define SPI_6338_MSG_DATA             0x41
--#define SPI_6338_MSG_DATA_SIZE                0x3f
--#define SPI_6338_RX_DATA              0x80
--#define SPI_6338_RX_DATA_SIZE         0x3f
--
--/* BCM 6348 SPI core */
-+/* BCM 6338/6348 SPI core */
- #define SPI_6348_CMD                  0x00    /* 16-bits register */
- #define SPI_6348_INT_STATUS           0x02
- #define SPI_6348_INT_MASK_ST          0x03
-@@ -1257,7 +1240,7 @@
- #define SPI_6348_RX_DATA              0x80
- #define SPI_6348_RX_DATA_SIZE         0x3f
--/* BCM 6358 SPI core */
-+/* BCM 6358/6368 SPI core */
- #define SPI_6358_MSG_CTL              0x00    /* 16-bits register */
- #define SPI_6358_MSG_CTL_WIDTH                16
- #define SPI_6358_MSG_DATA             0x02
-@@ -1274,23 +1257,6 @@
- #define SPI_6358_MSG_TAIL             0x709
- #define SPI_6358_RX_TAIL              0x70B
--/* BCM 6358 SPI core */
--#define SPI_6368_MSG_CTL              0x00    /* 16-bits register */
--#define SPI_6368_MSG_CTL_WIDTH                16
--#define SPI_6368_MSG_DATA             0x02
--#define SPI_6368_MSG_DATA_SIZE                0x21e
--#define SPI_6368_RX_DATA              0x400
--#define SPI_6368_RX_DATA_SIZE         0x220
--#define SPI_6368_CMD                  0x700   /* 16-bits register */
--#define SPI_6368_INT_STATUS           0x702
--#define SPI_6368_INT_MASK_ST          0x703
--#define SPI_6368_INT_MASK             0x704
--#define SPI_6368_ST                   0x705
--#define SPI_6368_CLK_CFG              0x706
--#define SPI_6368_FILL_BYTE            0x707
--#define SPI_6368_MSG_TAIL             0x709
--#define SPI_6368_RX_TAIL              0x70B
--
- /* Shared SPI definitions */
- /* Message configuration */
-@@ -1298,10 +1264,8 @@
- #define SPI_HD_W                      0x01
- #define SPI_HD_R                      0x02
- #define SPI_BYTE_CNT_SHIFT            0
--#define SPI_6338_MSG_TYPE_SHIFT               6
- #define SPI_6348_MSG_TYPE_SHIFT               6
- #define SPI_6358_MSG_TYPE_SHIFT               14
--#define SPI_6368_MSG_TYPE_SHIFT               14
- /* Command */
- #define SPI_CMD_NOOP                  0x00
diff --git a/target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch b/target/linux/brcm63xx/patches-3.8/023-MIPS-BCM63XX-fix-revision-ID-width.patch
deleted file mode 100644 (file)
index 0ee88e1..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From 609c69339a24bd034f5359dad14087276ce5a83f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 15 Jan 2012 14:41:22 +0100
-Subject: [PATCH 2/7] MIPS: BCM63XX: fix revision ID width
-
-The REVID is only 8 bit wide.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c                           |    4 ++--
- arch/mips/bcm63xx/setup.c                         |    2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |    2 +-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +-
- 4 files changed, 5 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -25,7 +25,7 @@ const int *bcm63xx_irqs;
- EXPORT_SYMBOL(bcm63xx_irqs);
- static u16 bcm63xx_cpu_id;
--static u16 bcm63xx_cpu_rev;
-+static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-@@ -87,7 +87,7 @@ u16 __bcm63xx_get_cpu_id(void)
- EXPORT_SYMBOL(__bcm63xx_get_cpu_id);
--u16 bcm63xx_get_cpu_rev(void)
-+u8 bcm63xx_get_cpu_rev(void)
- {
-       return bcm63xx_cpu_rev;
- }
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -126,7 +126,7 @@ static void __bcm63xx_machine_reboot(cha
- const char *get_system_type(void)
- {
-       static char buf[128];
--      snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)",
-+      snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%02X)",
-                board_get_name(),
-                bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev());
-       return buf;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -18,7 +18,7 @@
- void __init bcm63xx_cpu_init(void);
- u16 __bcm63xx_get_cpu_id(void);
--u16 bcm63xx_get_cpu_rev(void);
-+u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
- #ifdef CONFIG_BCM63XX_CPU_6328
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -10,7 +10,7 @@
- #define REV_CHIPID_SHIFT              16
- #define REV_CHIPID_MASK                       (0xffff << REV_CHIPID_SHIFT)
- #define REV_REVID_SHIFT                       0
--#define REV_REVID_MASK                        (0xffff << REV_REVID_SHIFT)
-+#define REV_REVID_MASK                        (0xff << REV_REVID_SHIFT)
- /* Clock Control register */
- #define PERF_CKCTL_REG                        0x4
diff --git a/target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch b/target/linux/brcm63xx/patches-3.8/024-MIPS-BCM63XX-rework-chip-detection.patch
deleted file mode 100644 (file)
index 0ff9edf..0000000
+++ /dev/null
@@ -1,133 +0,0 @@
-From 3f4570c9794fcae1cf62fbf3266a2e23edac67a5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Wed, 27 Jun 2012 15:01:09 +0200
-Subject: [PATCH 3/7] MIPS: BCM63XX: rework chip detection
-
-Instead of trying to use a correlation of cpu prid and chip id and
-hoping they will always be unique, use the cpu prid to determine the
-chip id register location and just read out the chip id.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/cpu.c |   87 +++++++++++++++++++++++------------------------
- 1 file changed, 42 insertions(+), 45 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -240,53 +240,27 @@ static unsigned int detect_memory_size(v
- void __init bcm63xx_cpu_init(void)
- {
--      unsigned int tmp, expected_cpu_id;
-+      unsigned int tmp;
-       struct cpuinfo_mips *c = &current_cpu_data;
-       unsigned int cpu = smp_processor_id();
-+      u32 chipid_reg;
-       /* soc registers location depends on cpu type */
--      expected_cpu_id = 0;
-+      chipid_reg = 0;
-       switch (c->cputype) {
-       case CPU_BMIPS3300:
--              if ((read_c0_prid() & 0xff00) == PRID_IMP_BMIPS3300_ALT) {
--                      expected_cpu_id = BCM6348_CPU_ID;
--                      bcm63xx_regs_base = bcm6348_regs_base;
--                      bcm63xx_irqs = bcm6348_irqs;
--              } else {
-+              if ((read_c0_prid() & 0xff00) != PRID_IMP_BMIPS3300_ALT)
-                       __cpu_name[cpu] = "Broadcom BCM6338";
--                      expected_cpu_id = BCM6338_CPU_ID;
--                      bcm63xx_regs_base = bcm6338_regs_base;
--                      bcm63xx_irqs = bcm6338_irqs;
--              }
--              break;
-+              /* fall-through */
-       case CPU_BMIPS32:
--              expected_cpu_id = BCM6345_CPU_ID;
--              bcm63xx_regs_base = bcm6345_regs_base;
--              bcm63xx_irqs = bcm6345_irqs;
-+              chipid_reg = BCM_6345_PERF_BASE;
-               break;
-       case CPU_BMIPS4350:
--              if ((read_c0_prid() & 0xf0) == 0x10) {
--                      expected_cpu_id = BCM6358_CPU_ID;
--                      bcm63xx_regs_base = bcm6358_regs_base;
--                      bcm63xx_irqs = bcm6358_irqs;
--              } else {
--                      /* all newer chips have the same chip id location */
--                      u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
--
--                      switch (chip_id) {
--                      case BCM6328_CPU_ID:
--                              expected_cpu_id = BCM6328_CPU_ID;
--                              bcm63xx_regs_base = bcm6328_regs_base;
--                              bcm63xx_irqs = bcm6328_irqs;
--                              break;
--                      case BCM6368_CPU_ID:
--                              expected_cpu_id = BCM6368_CPU_ID;
--                              bcm63xx_regs_base = bcm6368_regs_base;
--                              bcm63xx_irqs = bcm6368_irqs;
--                              break;
--                      }
--              }
-+              if ((read_c0_prid() & 0xf0) == 0x10)
-+                      chipid_reg = BCM_6345_PERF_BASE;
-+              else
-+                      chipid_reg = BCM_6368_PERF_BASE;
-               break;
-       }
-@@ -294,20 +268,43 @@ void __init bcm63xx_cpu_init(void)
-        * really early to panic, but delaying panic would not help since we
-        * will never get any working console
-        */
--      if (!expected_cpu_id)
-+      if (!chipid_reg)
-               panic("unsupported Broadcom CPU");
--      /*
--       * bcm63xx_regs_base is set, we can access soc registers
--       */
--
--      /* double check CPU type */
--      tmp = bcm_perf_readl(PERF_REV_REG);
-+      /* read out CPU type */
-+      tmp = bcm_readl(chipid_reg);
-       bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT;
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
--      if (bcm63xx_cpu_id != expected_cpu_id)
--              panic("bcm63xx CPU id mismatch");
-+      switch (bcm63xx_cpu_id) {
-+      case BCM6328_CPU_ID:
-+              bcm63xx_regs_base = bcm6328_regs_base;
-+              bcm63xx_irqs = bcm6328_irqs;
-+              break;
-+      case BCM6338_CPU_ID:
-+              bcm63xx_regs_base = bcm6338_regs_base;
-+              bcm63xx_irqs = bcm6338_irqs;
-+              break;
-+      case BCM6345_CPU_ID:
-+              bcm63xx_regs_base = bcm6345_regs_base;
-+              bcm63xx_irqs = bcm6345_irqs;
-+              break;
-+      case BCM6348_CPU_ID:
-+              bcm63xx_regs_base = bcm6348_regs_base;
-+              bcm63xx_irqs = bcm6348_irqs;
-+              break;
-+      case BCM6358_CPU_ID:
-+              bcm63xx_regs_base = bcm6358_regs_base;
-+              bcm63xx_irqs = bcm6358_irqs;
-+              break;
-+      case BCM6368_CPU_ID:
-+              bcm63xx_regs_base = bcm6368_regs_base;
-+              bcm63xx_irqs = bcm6368_irqs;
-+              break;
-+      default:
-+              panic("unsupported broadcom CPU %x", bcm63xx_cpu_id);
-+              break;
-+      }
-       bcm63xx_cpu_freq = detect_cpu_clock();
-       bcm63xx_memory_size = detect_memory_size();
diff --git a/target/linux/brcm63xx/patches-3.8/025-MIPS-BCM63XX-add-basic-BCM6362-support.patch b/target/linux/brcm63xx/patches-3.8/025-MIPS-BCM63XX-add-basic-BCM6362-support.patch
deleted file mode 100644 (file)
index 53a6497..0000000
+++ /dev/null
@@ -1,575 +0,0 @@
-From 1071a9c9527d68eca4605e2eb1686609bfecf287 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 21 Nov 2011 00:48:52 +0100
-Subject: [PATCH 4/7] MIPS: BCM63XX: add basic BCM6362 support
-
-Add basic support for detecting and booting the BCM6362.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig                         |    4 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c         |    6 +-
- arch/mips/bcm63xx/cpu.c                           |   51 +++++++-
- arch/mips/bcm63xx/irq.c                           |   22 ++++
- arch/mips/bcm63xx/prom.c                          |    2 +
- arch/mips/bcm63xx/reset.c                         |   28 +++++
- arch/mips/bcm63xx/setup.c                         |    3 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |  139 +++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h |    2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   61 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/ioremap.h      |    1 +
- 11 files changed, 314 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -25,6 +25,10 @@ config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select HW_HAS_PCI
-+config BCM63XX_CPU_6362
-+      bool "support 6362 CPU"
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select HW_HAS_PCI
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -726,11 +726,11 @@ void __init board_prom_init(void)
-       u32 val;
-       /* read base address of boot chip select (0)
--       * 6328 does not have MPI but boots from a fixed address
-+       * 6328/6362 do not have MPI but boot from a fixed address
-        */
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-               val = 0x18000000;
--      else {
-+      } else {
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-               val &= MPI_CSBASE_BASE_MASK;
-       }
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -71,6 +71,15 @@ static const int bcm6358_irqs[] = {
- };
-+static const unsigned long bcm6362_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(6362)
-+};
-+
-+static const int bcm6362_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(6362)
-+
-+};
-+
- static const unsigned long bcm6368_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6368)
- };
-@@ -169,6 +178,42 @@ static unsigned int detect_cpu_clock(voi
-               return (16 * 1000000 * n1 * n2) / m1;
-       }
-+      case BCM6362_CPU_ID:
-+      {
-+              unsigned int tmp, mips_pll_fcvo;
-+
-+              tmp = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+              mips_pll_fcvo = (tmp & STRAPBUS_6362_FCVO_MASK)
-+                              >> STRAPBUS_6362_FCVO_SHIFT;
-+              switch (mips_pll_fcvo) {
-+              case 0x03:
-+              case 0x0b:
-+              case 0x13:
-+              case 0x1b:
-+                      return 240000000;
-+              case 0x04:
-+              case 0x0c:
-+              case 0x14:
-+              case 0x1c:
-+                      return 160000000;
-+              case 0x05:
-+              case 0x0e:
-+              case 0x16:
-+              case 0x1e:
-+              case 0x1f:
-+                      return 400000000;
-+              case 0x06:
-+                      return 440000000;
-+              case 0x07:
-+              case 0x17:
-+                      return 384000000;
-+              case 0x15:
-+              case 0x1d:
-+                      return 200000000;
-+              default:
-+                      return 320000000;
-+              }
-+      }
-       case BCM6368_CPU_ID:
-       {
-               unsigned int tmp, p1, p2, ndiv, m1;
-@@ -205,7 +250,7 @@ static unsigned int detect_memory_size(v
-       unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
-       u32 val;
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
-               return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-       if (BCMCPU_IS_6345()) {
-@@ -297,6 +342,10 @@ void __init bcm63xx_cpu_init(void)
-               bcm63xx_regs_base = bcm6358_regs_base;
-               bcm63xx_irqs = bcm6358_irqs;
-               break;
-+      case BCM6362_CPU_ID:
-+              bcm63xx_regs_base = bcm6362_regs_base;
-+              bcm63xx_irqs = bcm6362_irqs;
-+              break;
-       case BCM6368_CPU_ID:
-               bcm63xx_regs_base = bcm6368_regs_base;
-               bcm63xx_irqs = bcm6368_irqs;
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -82,6 +82,17 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6358
- #define ext_irq_cfg_reg2      0
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+#define irq_stat_reg          PERF_IRQSTAT_6362_REG
-+#define irq_mask_reg          PERF_IRQMASK_6362_REG
-+#define irq_bits              64
-+#define is_ext_irq_cascaded   1
-+#define ext_irq_start         (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-+#define ext_irq_end           (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
-+#define ext_irq_count         4
-+#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_6362
-+#define ext_irq_cfg_reg2      0
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #define irq_stat_reg          PERF_IRQSTAT_6368_REG
- #define irq_mask_reg          PERF_IRQMASK_6368_REG
-@@ -170,6 +181,16 @@ static void bcm63xx_init_irq(void)
-               ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-               break;
-+      case BCM6362_CPU_ID:
-+              irq_stat_addr += PERF_IRQSTAT_6362_REG;
-+              irq_mask_addr += PERF_IRQMASK_6362_REG;
-+              irq_bits = 64;
-+              ext_irq_count = 4;
-+              is_ext_irq_cascaded = 1;
-+              ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+              ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+              break;
-       case BCM6368_CPU_ID:
-               irq_stat_addr += PERF_IRQSTAT_6368_REG;
-               irq_mask_addr += PERF_IRQMASK_6368_REG;
-@@ -458,6 +479,7 @@ static int bcm63xx_external_irq_set_type
-       case BCM6338_CPU_ID:
-       case BCM6345_CPU_ID:
-       case BCM6358_CPU_ID:
-+      case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-               if (levelsense)
-                       reg |= EXTIRQ_CFG_LEVELSENSE(irq);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -36,6 +36,8 @@ void __init prom_init(void)
-               mask = CKCTL_6348_ALL_SAFE_EN;
-       else if (BCMCPU_IS_6358())
-               mask = CKCTL_6358_ALL_SAFE_EN;
-+      else if (BCMCPU_IS_6362())
-+              mask = CKCTL_6362_ALL_SAFE_EN;
-       else if (BCMCPU_IS_6368())
-               mask = CKCTL_6368_ALL_SAFE_EN;
-       else
---- a/arch/mips/bcm63xx/reset.c
-+++ b/arch/mips/bcm63xx/reset.c
-@@ -85,6 +85,20 @@
- #define BCM6358_RESET_PCIE    0
- #define BCM6358_RESET_PCIE_EXT        0
-+#define BCM6362_RESET_SPI     SOFTRESET_6362_SPI_MASK
-+#define BCM6362_RESET_ENET    0
-+#define BCM6362_RESET_USBH    SOFTRESET_6362_USBH_MASK
-+#define BCM6362_RESET_USBD    SOFTRESET_6362_USBS_MASK
-+#define BCM6362_RESET_DSL     0
-+#define BCM6362_RESET_SAR     SOFTRESET_6362_SAR_MASK
-+#define BCM6362_RESET_EPHY    SOFTRESET_6362_EPHY_MASK
-+#define BCM6362_RESET_ENETSW  SOFTRESET_6362_ENETSW_MASK
-+#define BCM6362_RESET_PCM     SOFTRESET_6362_PCM_MASK
-+#define BCM6362_RESET_MPI     0
-+#define BCM6362_RESET_PCIE      (SOFTRESET_6362_PCIE_MASK | \
-+                               SOFTRESET_6362_PCIE_CORE_MASK)
-+#define BCM6362_RESET_PCIE_EXT        SOFTRESET_6362_PCIE_EXT_MASK
-+
- #define BCM6368_RESET_SPI     SOFTRESET_6368_SPI_MASK
- #define BCM6368_RESET_ENET    0
- #define BCM6368_RESET_USBH    SOFTRESET_6368_USBH_MASK
-@@ -119,6 +133,10 @@ static const u32 bcm6358_reset_bits[] =
-       __GEN_RESET_BITS_TABLE(6358)
- };
-+static const u32 bcm6362_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6362)
-+};
-+
- static const u32 bcm6368_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6368)
- };
-@@ -140,6 +158,9 @@ static int __init bcm63xx_reset_bits_ini
-       } else if (BCMCPU_IS_6358()) {
-               reset_reg = PERF_SOFTRESET_6358_REG;
-               bcm63xx_reset_bits = bcm6358_reset_bits;
-+      } else if (BCMCPU_IS_6362()) {
-+              reset_reg = PERF_SOFTRESET_6362_REG;
-+              bcm63xx_reset_bits = bcm6362_reset_bits;
-       } else if (BCMCPU_IS_6368()) {
-               reset_reg = PERF_SOFTRESET_6368_REG;
-               bcm63xx_reset_bits = bcm6368_reset_bits;
-@@ -182,6 +203,13 @@ static const u32 bcm63xx_reset_bits[] =
- #define reset_reg PERF_SOFTRESET_6358_REG
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static const u32 bcm63xx_reset_bits[] = {
-+      __GEN_RESET_BITS_TABLE(6362)
-+};
-+#define reset_reg PERF_SOFTRESET_6362_REG
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
- static const u32 bcm63xx_reset_bits[] = {
-       __GEN_RESET_BITS_TABLE(6368)
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -83,6 +83,9 @@ void bcm63xx_machine_reboot(void)
-       case BCM6358_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
-               break;
-+      case BCM6362_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362;
-+              break;
-       }
-       for (i = 0; i < 2; i++) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -14,6 +14,7 @@
- #define BCM6345_CPU_ID                0x6345
- #define BCM6348_CPU_ID                0x6348
- #define BCM6358_CPU_ID                0x6358
-+#define BCM6362_CPU_ID                0x6362
- #define BCM6368_CPU_ID                0x6368
- void __init bcm63xx_cpu_init(void);
-@@ -86,6 +87,20 @@ unsigned int bcm63xx_get_cpu_freq(void);
- # define BCMCPU_IS_6358()     (0)
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+# ifdef bcm63xx_get_cpu_id
-+#  undef bcm63xx_get_cpu_id
-+#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
-+#  define BCMCPU_RUNTIME_DETECT
-+# else
-+#  define bcm63xx_get_cpu_id()        BCM6362_CPU_ID
-+# endif
-+# define BCMCPU_IS_6362()     (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
-+#else
-+# define BCMCPU_IS_6362()     (0)
-+#endif
-+
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
- # ifdef bcm63xx_get_cpu_id
- #  undef bcm63xx_get_cpu_id
-@@ -406,6 +421,62 @@ enum bcm63xx_regs_set {
- /*
-+ * 6362 register sets base address
-+ */
-+#define BCM_6362_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_6362_PERF_BASE            (0xb0000000)
-+#define BCM_6362_TIMER_BASE           (0xb0000040)
-+#define BCM_6362_WDT_BASE             (0xb000005c)
-+#define BCM_6362_UART0_BASE             (0xb0000100)
-+#define BCM_6362_UART1_BASE           (0xb0000120)
-+#define BCM_6362_GPIO_BASE            (0xb0000080)
-+#define BCM_6362_SPI_BASE             (0xb0000800)
-+#define BCM_6362_HSSPI_BASE           (0xb0001000)
-+#define BCM_6362_UDC0_BASE            (0xdeadbeef)
-+#define BCM_6362_USBDMA_BASE          (0xb000c000)
-+#define BCM_6362_OHCI0_BASE           (0xb0002600)
-+#define BCM_6362_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_6362_USBH_PRIV_BASE               (0xb0002700)
-+#define BCM_6362_USBD_BASE            (0xb0002400)
-+#define BCM_6362_MPI_BASE             (0xdeadbeef)
-+#define BCM_6362_PCMCIA_BASE          (0xdeadbeef)
-+#define BCM_6362_PCIE_BASE            (0xb0e40000)
-+#define BCM_6362_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_6362_DSL_BASE             (0xdeadbeef)
-+#define BCM_6362_UBUS_BASE            (0xdeadbeef)
-+#define BCM_6362_ENET0_BASE           (0xdeadbeef)
-+#define BCM_6362_ENET1_BASE           (0xdeadbeef)
-+#define BCM_6362_ENETDMA_BASE         (0xb000d800)
-+#define BCM_6362_ENETDMAC_BASE                (0xb000da00)
-+#define BCM_6362_ENETDMAS_BASE                (0xb000dc00)
-+#define BCM_6362_ENETSW_BASE          (0xb0e00000)
-+#define BCM_6362_EHCI0_BASE           (0xb0002500)
-+#define BCM_6362_SDRAM_BASE           (0xdeadbeef)
-+#define BCM_6362_MEMC_BASE            (0xdeadbeef)
-+#define BCM_6362_DDR_BASE             (0xb0003000)
-+#define BCM_6362_M2M_BASE             (0xdeadbeef)
-+#define BCM_6362_ATM_BASE             (0xdeadbeef)
-+#define BCM_6362_XTM_BASE             (0xb0007800)
-+#define BCM_6362_XTMDMA_BASE          (0xb000b800)
-+#define BCM_6362_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6362_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6362_PCM_BASE             (0xb000a800)
-+#define BCM_6362_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_6362_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_6362_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_6362_RNG_BASE             (0xdeadbeef)
-+#define BCM_6362_MISC_BASE            (0xb0001800)
-+
-+#define BCM_6362_NAND_REG_BASE                (0xb0000200)
-+#define BCM_6362_NAND_CACHE_BASE      (0xb0000600)
-+#define BCM_6362_LED_BASE             (0xb0001900)
-+#define BCM_6362_IPSEC_BASE           (0xb0002800)
-+#define BCM_6362_IPSEC_DMA_BASE               (0xb000d000)
-+#define BCM_6362_WLAN_CHIPCOMMON_BASE (0xb0004000)
-+#define BCM_6362_WLAN_D11_BASE                (0xb0005000)
-+#define BCM_6362_WLAN_SHIM_BASE               (0xb0007000)
-+
-+/*
-  * 6368 register sets base address
-  */
- #define BCM_6368_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -564,6 +635,9 @@ static inline unsigned long bcm63xx_regs
- #ifdef CONFIG_BCM63XX_CPU_6358
-       __GEN_RSET(6358)
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      __GEN_RSET(6362)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
-       __GEN_RSET(6368)
- #endif
-@@ -820,6 +894,71 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
- /*
-+ * 6362 irqs
-+ */
-+#define BCM_6362_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
-+
-+#define BCM_6362_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6362_SPI_IRQ              (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6362_UART0_IRQ            (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6362_UART1_IRQ            (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6362_DSL_IRQ              (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6362_UDC0_IRQ             0
-+#define BCM_6362_ENET0_IRQ            0
-+#define BCM_6362_ENET1_IRQ            0
-+#define BCM_6362_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 14)
-+#define BCM_6362_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6362_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6362_EHCI0_IRQ            (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6362_USBD_IRQ             (IRQ_INTERNAL_BASE + 11)
-+#define BCM_6362_USBD_RXDMA0_IRQ      (IRQ_INTERNAL_BASE + 20)
-+#define BCM_6362_USBD_TXDMA0_IRQ      (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6362_USBD_RXDMA1_IRQ      (IRQ_INTERNAL_BASE + 22)
-+#define BCM_6362_USBD_TXDMA1_IRQ      (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6362_USBD_RXDMA2_IRQ      (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6362_USBD_TXDMA2_IRQ      (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6362_PCMCIA_IRQ           0
-+#define BCM_6362_ENET0_RXDMA_IRQ      0
-+#define BCM_6362_ENET0_TXDMA_IRQ      0
-+#define BCM_6362_ENET1_RXDMA_IRQ      0
-+#define BCM_6362_ENET1_TXDMA_IRQ      0
-+#define BCM_6362_PCI_IRQ              (IRQ_INTERNAL_BASE + 30)
-+#define BCM_6362_ATM_IRQ              0
-+#define BCM_6362_ENETSW_RXDMA0_IRQ    (BCM_6362_HIGH_IRQ_BASE + 0)
-+#define BCM_6362_ENETSW_RXDMA1_IRQ    (BCM_6362_HIGH_IRQ_BASE + 1)
-+#define BCM_6362_ENETSW_RXDMA2_IRQ    (BCM_6362_HIGH_IRQ_BASE + 2)
-+#define BCM_6362_ENETSW_RXDMA3_IRQ    (BCM_6362_HIGH_IRQ_BASE + 3)
-+#define BCM_6362_ENETSW_TXDMA0_IRQ    0
-+#define BCM_6362_ENETSW_TXDMA1_IRQ    0
-+#define BCM_6362_ENETSW_TXDMA2_IRQ    0
-+#define BCM_6362_ENETSW_TXDMA3_IRQ    0
-+#define BCM_6362_XTM_IRQ              0
-+#define BCM_6362_XTM_DMA0_IRQ         (BCM_6362_HIGH_IRQ_BASE + 12)
-+
-+#define BCM_6362_RING_OSC_IRQ         (IRQ_INTERNAL_BASE + 1)
-+#define BCM_6362_WLAN_GPIO_IRQ                (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6362_WLAN_IRQ             (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6362_IPSEC_IRQ            (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6362_NAND_IRQ             (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6362_PCM_IRQ              (IRQ_INTERNAL_BASE + 13)
-+#define BCM_6362_DG_IRQ                       (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6362_EPHY_ENERGY0_IRQ     (IRQ_INTERNAL_BASE + 16)
-+#define BCM_6362_EPHY_ENERGY1_IRQ     (IRQ_INTERNAL_BASE + 17)
-+#define BCM_6362_EPHY_ENERGY2_IRQ     (IRQ_INTERNAL_BASE + 18)
-+#define BCM_6362_EPHY_ENERGY3_IRQ     (IRQ_INTERNAL_BASE + 19)
-+#define BCM_6362_IPSEC_DMA0_IRQ               (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6362_IPSEC_DMA1_IRQ               (IRQ_INTERNAL_BASE + 27)
-+#define BCM_6362_FAP0_IRQ             (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6362_PCM_DMA0_IRQ         (BCM_6362_HIGH_IRQ_BASE + 4)
-+#define BCM_6362_PCM_DMA1_IRQ         (BCM_6362_HIGH_IRQ_BASE + 5)
-+#define BCM_6362_DECT0_IRQ            (BCM_6362_HIGH_IRQ_BASE + 6)
-+#define BCM_6362_DECT1_IRQ            (BCM_6362_HIGH_IRQ_BASE + 7)
-+#define BCM_6362_EXT_IRQ0             (BCM_6362_HIGH_IRQ_BASE + 8)
-+#define BCM_6362_EXT_IRQ1             (BCM_6362_HIGH_IRQ_BASE + 9)
-+#define BCM_6362_EXT_IRQ2             (BCM_6362_HIGH_IRQ_BASE + 10)
-+#define BCM_6362_EXT_IRQ3             (BCM_6362_HIGH_IRQ_BASE + 11)
-+
-+/*
-  * 6368 irqs
-  */
- #define BCM_6368_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -17,6 +17,8 @@ static inline unsigned long bcm63xx_gpio
-               return 8;
-       case BCM6345_CPU_ID:
-               return 16;
-+      case BCM6362_CPU_ID:
-+              return 48;
-       case BCM6368_CPU_ID:
-               return 38;
-       case BCM6348_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -112,6 +112,39 @@
-                                       CKCTL_6358_USBSU_EN |           \
-                                       CKCTL_6358_EPHY_EN)
-+#define CKCTL_6362_ADSL_QPROC_EN      (1 << 1)
-+#define CKCTL_6362_ADSL_AFE_EN                (1 << 2)
-+#define CKCTL_6362_ADSL_EN            (1 << 3)
-+#define CKCTL_6362_MIPS_EN            (1 << 4)
-+#define CKCTL_6362_WLAN_OCP_EN                (1 << 5)
-+#define CKCTL_6362_SWPKT_USB_EN               (1 << 7)
-+#define CKCTL_6362_SWPKT_SAR_EN               (1 << 8)
-+#define CKCTL_6362_SAR_EN             (1 << 9)
-+#define CKCTL_6362_ROBOSW_EN          (1 << 10)
-+#define CKCTL_6362_PCM_EN             (1 << 11)
-+#define CKCTL_6362_USBD_EN            (1 << 12)
-+#define CKCTL_6362_USBH_EN            (1 << 13)
-+#define CKCTL_6362_IPSEC_EN           (1 << 14)
-+#define CKCTL_6362_SPI_EN             (1 << 15)
-+#define CKCTL_6362_HSSPI_EN           (1 << 16)
-+#define CKCTL_6362_PCIE_EN            (1 << 17)
-+#define CKCTL_6362_FAP_EN             (1 << 18)
-+#define CKCTL_6362_PHYMIPS_EN         (1 << 19)
-+#define CKCTL_6362_NAND_EN            (1 << 20)
-+
-+#define CKCTL_6362_ALL_SAFE_EN                (CKCTL_6362_PHYMIPS_EN |        \
-+                                      CKCTL_6362_ADSL_QPROC_EN |      \
-+                                      CKCTL_6362_ADSL_AFE_EN |        \
-+                                      CKCTL_6362_ADSL_EN |            \
-+                                      CKCTL_6362_SAR_EN  |            \
-+                                      CKCTL_6362_PCM_EN  |            \
-+                                      CKCTL_6362_IPSEC_EN |           \
-+                                      CKCTL_6362_USBD_EN |            \
-+                                      CKCTL_6362_USBH_EN |            \
-+                                      CKCTL_6362_ROBOSW_EN |          \
-+                                      CKCTL_6362_PCIE_EN)
-+
-+
- #define CKCTL_6368_VDSL_QPROC_EN      (1 << 2)
- #define CKCTL_6368_VDSL_AFE_EN                (1 << 3)
- #define CKCTL_6368_VDSL_BONDING_EN    (1 << 4)
-@@ -153,6 +186,7 @@
- #define PERF_IRQMASK_6345_REG         0xc
- #define PERF_IRQMASK_6348_REG         0xc
- #define PERF_IRQMASK_6358_REG         0xc
-+#define PERF_IRQMASK_6362_REG         0x20
- #define PERF_IRQMASK_6368_REG         0x20
- /* Interrupt Status register */
-@@ -161,6 +195,7 @@
- #define PERF_IRQSTAT_6345_REG         0x10
- #define PERF_IRQSTAT_6348_REG         0x10
- #define PERF_IRQSTAT_6358_REG         0x10
-+#define PERF_IRQSTAT_6362_REG         0x28
- #define PERF_IRQSTAT_6368_REG         0x28
- /* External Interrupt Configuration register */
-@@ -169,6 +204,7 @@
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
- #define PERF_EXTIRQ_CFG_REG_6348      0x14
- #define PERF_EXTIRQ_CFG_REG_6358      0x14
-+#define PERF_EXTIRQ_CFG_REG_6362      0x18
- #define PERF_EXTIRQ_CFG_REG_6368      0x18
- #define PERF_EXTIRQ_CFG_REG2_6368     0x1c
-@@ -197,6 +233,7 @@
- #define PERF_SOFTRESET_REG            0x28
- #define PERF_SOFTRESET_6328_REG               0x10
- #define PERF_SOFTRESET_6358_REG               0x34
-+#define PERF_SOFTRESET_6362_REG               0x10
- #define PERF_SOFTRESET_6368_REG               0x10
- #define SOFTRESET_6328_SPI_MASK               (1 << 0)
-@@ -259,6 +296,22 @@
- #define SOFTRESET_6358_PCM_MASK               (1 << 13)
- #define SOFTRESET_6358_ADSL_MASK      (1 << 14)
-+#define SOFTRESET_6362_SPI_MASK               (1 << 0)
-+#define SOFTRESET_6362_IPSEC_MASK     (1 << 1)
-+#define SOFTRESET_6362_EPHY_MASK      (1 << 2)
-+#define SOFTRESET_6362_SAR_MASK               (1 << 3)
-+#define SOFTRESET_6362_ENETSW_MASK    (1 << 4)
-+#define SOFTRESET_6362_USBS_MASK      (1 << 5)
-+#define SOFTRESET_6362_USBH_MASK      (1 << 6)
-+#define SOFTRESET_6362_PCM_MASK               (1 << 7)
-+#define SOFTRESET_6362_PCIE_CORE_MASK (1 << 8)
-+#define SOFTRESET_6362_PCIE_MASK      (1 << 9)
-+#define SOFTRESET_6362_PCIE_EXT_MASK  (1 << 10)
-+#define SOFTRESET_6362_WLAN_SHIM_MASK (1 << 11)
-+#define SOFTRESET_6362_DDR_PHY_MASK   (1 << 12)
-+#define SOFTRESET_6362_FAP_MASK               (1 << 13)
-+#define SOFTRESET_6362_WLAN_UBUS_MASK (1 << 14)
-+
- #define SOFTRESET_6368_SPI_MASK               (1 << 0)
- #define SOFTRESET_6368_MPI_MASK               (1 << 3)
- #define SOFTRESET_6368_EPHY_MASK      (1 << 6)
-@@ -1240,7 +1293,7 @@
- #define SPI_6348_RX_DATA              0x80
- #define SPI_6348_RX_DATA_SIZE         0x3f
--/* BCM 6358/6368 SPI core */
-+/* BCM 6358/6262/6368 SPI core */
- #define SPI_6358_MSG_CTL              0x00    /* 16-bits register */
- #define SPI_6358_MSG_CTL_WIDTH                16
- #define SPI_6358_MSG_DATA             0x02
-@@ -1316,6 +1369,12 @@
- #define SERDES_PCIE_EN                        (1 << 0)
- #define SERDES_PCIE_EXD_EN            (1 << 15)
-+#define MISC_STRAPBUS_6362_REG                0x14
-+#define STRAPBUS_6362_FCVO_SHIFT      1
-+#define STRAPBUS_6362_FCVO_MASK               (0x1f << STRAPBUS_6362_FCVO_SHIFT)
-+#define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
-+#define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
-+
- #define MISC_STRAPBUS_6328_REG                0x240
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -19,6 +19,7 @@ static inline int is_bcm63xx_internal_re
-                       return 1;
-               break;
-       case BCM6328_CPU_ID:
-+      case BCM6362_CPU_ID:
-       case BCM6368_CPU_ID:
-               if (offset >= 0xb0000000 && offset < 0xb1000000)
-                       return 1;
diff --git a/target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/026-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
deleted file mode 100644 (file)
index 27a411d..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
-From 5da349ee614f61a2e6edb403098f40c6d40f2553 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 5 Jul 2012 21:19:20 +0200
-Subject: [PATCH 5/7] MIPS: BCM63XX: enable SPI controller for BCM6362
-
-The SPI controller shares the same register layout as the 6358 one.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c                              |    2 ++
- arch/mips/bcm63xx/dev-spi.c                          |    4 ++--
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h |    3 ++-
- 3 files changed, 6 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -202,6 +202,8 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6348_SPI_EN;
-       else if (BCMCPU_IS_6358())
-               mask = CKCTL_6358_SPI_EN;
-+      else if (BCMCPU_IS_6362())
-+              mask = CKCTL_6362_SPI_EN;
-       else
-               /* BCMCPU_IS_6368 */
-               mask = CKCTL_6368_SPI_EN;
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
- {
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-               bcm63xx_regs_spi = bcm6348_regs_spi;
--      if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               bcm63xx_regs_spi = bcm6358_regs_spi;
- }
- #else
-@@ -87,7 +87,7 @@ int __init bcm63xx_spi_register(void)
-               spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
-       }
--      if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-+      if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-               spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-               spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -74,7 +74,8 @@ static inline unsigned long bcm63xx_spir
- #if defined(CONFIG_BCM63XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348)
-       __GEN_SPI_RSET(6348)
- #endif
--#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6368)
-+#if defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) || \
-+      defined(CONFIG_BCM63XX_CPU_6368)
-       __GEN_SPI_RSET(6358)
- #endif
- #endif
diff --git a/target/linux/brcm63xx/patches-3.8/027-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/027-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
deleted file mode 100644 (file)
index 3c5b119..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-From ec6f1e53b22d01e628b79b99f7a33960034e97e7 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 21 Nov 2011 00:53:26 +0100
-Subject: [PATCH 6/7] MIPS: BCM63XX: enable pcie for BCM6362
-
-The PCIe controller is almost the same as the BCM6328 one, with only
-the SERDES register being at a different location.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    3 ++-
- arch/mips/pci/pci-bcm63xx.c                       |   11 +++++++++--
- 2 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1365,7 +1365,8 @@
- /*************************************************************************
-  * _REG relative to RSET_MISC
-  *************************************************************************/
--#define MISC_SERDES_CTRL_REG          0x0
-+#define MISC_SERDES_CTRL_6328_REG     0x0
-+#define MISC_SERDES_CTRL_6362_REG     0x4
- #define SERDES_PCIE_EN                        (1 << 0)
- #define SERDES_PCIE_EXD_EN            (1 << 15)
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -121,11 +121,17 @@ void __iomem *pci_iospace_start;
- static void __init bcm63xx_reset_pcie(void)
- {
-       u32 val;
-+      u32 reg;
-       /* enable SERDES */
--      val = bcm_misc_readl(MISC_SERDES_CTRL_REG);
-+      if (BCMCPU_IS_6328())
-+              reg = MISC_SERDES_CTRL_6328_REG;
-+      else
-+              reg = MISC_SERDES_CTRL_6362_REG;
-+
-+      val = bcm_misc_readl(reg);
-       val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
--      bcm_misc_writel(val, MISC_SERDES_CTRL_REG);
-+      bcm_misc_writel(val, reg);
-       /* reset the PCIe core */
-       bcm63xx_core_set_reset(BCM63XX_RESET_PCIE, 1);
-@@ -330,6 +336,7 @@ static int __init bcm63xx_pci_init(void)
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-+      case BCM6362_CPU_ID:
-               return bcm63xx_register_pcie();
-       case BCM6348_CPU_ID:
-       case BCM6358_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.8/028-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
deleted file mode 100644 (file)
index 38125a5..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 01034e48e72783ced82a050e862f82ee3dfdb783 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 21 Nov 2011 00:48:52 +0100
-Subject: [PATCH 7/7] MIPS: BCM63XX: add flash detection for BCM6362
-
-BCM6362 support booting from SPI flash and NAND.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/dev-flash.c                     |    6 ++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    1 +
- 2 files changed, 7 insertions(+)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -77,6 +77,12 @@ static int __init bcm63xx_detect_flash_t
-                       return BCM63XX_FLASH_TYPE_PARALLEL;
-               else
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-+      case BCM6362_CPU_ID:
-+              val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+              if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-+                      return BCM63XX_FLASH_TYPE_SERIAL;
-+              else
-+                      return BCM63XX_FLASH_TYPE_NAND;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1372,6 +1372,7 @@
- #define MISC_STRAPBUS_6362_REG                0x14
- #define STRAPBUS_6362_FCVO_SHIFT      1
-+#define STRAPBUS_6362_HSSPI_CLK_FAST  (1 << 13)
- #define STRAPBUS_6362_FCVO_MASK               (0x1f << STRAPBUS_6362_FCVO_SHIFT)
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
diff --git a/target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch b/target/linux/brcm63xx/patches-3.8/029-MIPS-BCM63XX-add-missing-clocks-for-BCM6328-and-BCM6.patch
deleted file mode 100644 (file)
index bc72a00..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-From d31454bc822e1957e758e75d4367bcd12af89743 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 18 Apr 2013 21:23:11 +0200
-Subject: [PATCH] MIPS: BCM63XX: add missing clocks for BCM6328 and BCM6362
-
-Add currently unused missing clocks for BCM6328 and BCM6362.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |   33 +++++++++++++++++++++++++--------
- 1 file changed, 25 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -125,11 +125,18 @@ static struct clk clk_ephy = {
-  */
- static void enetsw_set(struct clk *clk, int enable)
- {
--      if (!BCMCPU_IS_6368())
-+      if (BCMCPU_IS_6328())
-+              bcm_hwclock_set(CKCTL_6328_ROBOSW_EN, enable);
-+      else if (BCMCPU_IS_6362())
-+              bcm_hwclock_set(CKCTL_6362_ROBOSW_EN, enable);
-+      else if (BCMCPU_IS_6368())
-+              bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
-+                              CKCTL_6368_SWPKT_USB_EN |
-+                              CKCTL_6368_SWPKT_SAR_EN,
-+                              enable);
-+      else
-               return;
--      bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
--                      CKCTL_6368_SWPKT_USB_EN |
--                      CKCTL_6368_SWPKT_SAR_EN, enable);
-+
-       if (enable) {
-               /* reset switch core afer clock change */
-               bcm63xx_core_set_reset(BCM63XX_RESET_ENETSW, 1);
-@@ -166,6 +173,8 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6328_USBH_EN, enable);
-       else if (BCMCPU_IS_6348())
-               bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
-+      else if (BCMCPU_IS_6362())
-+              bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- }
-@@ -181,6 +190,8 @@ static void usbd_set(struct clk *clk, in
- {
-       if (BCMCPU_IS_6328())
-               bcm_hwclock_set(CKCTL_6328_USBD_EN, enable);
-+      else if (BCMCPU_IS_6362())
-+              bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
- }
-@@ -244,7 +255,10 @@ static struct clk clk_xtm = {
-  */
- static void ipsec_set(struct clk *clk, int enable)
- {
--      bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
-+      if (BCMCPU_IS_6362())
-+              bcm_hwclock_set(CKCTL_6362_IPSEC_EN, enable);
-+      else if (BCMCPU_IS_6368())
-+              bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
- }
- static struct clk clk_ipsec = {
-@@ -257,7 +271,10 @@ static struct clk clk_ipsec = {
- static void pcie_set(struct clk *clk, int enable)
- {
--      bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-+      if (BCMCPU_IS_6328())
-+              bcm_hwclock_set(CKCTL_6328_PCIE_EN, enable);
-+      else if (BCMCPU_IS_6362())
-+              bcm_hwclock_set(CKCTL_6362_PCIE_EN, enable);
- }
- static struct clk clk_pcie = {
-@@ -323,9 +340,9 @@ struct clk *clk_get(struct device *dev,
-               return &clk_periph;
-       if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
-               return &clk_pcm;
--      if (BCMCPU_IS_6368() && !strcmp(id, "ipsec"))
-+      if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
-               return &clk_ipsec;
--      if (BCMCPU_IS_6328() && !strcmp(id, "pcie"))
-+      if ((BCMCPU_IS_6328() || BCMCPU_IS_6362()) && !strcmp(id, "pcie"))
-               return &clk_pcie;
-       return ERR_PTR(-ENOENT);
- }
diff --git a/target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch b/target/linux/brcm63xx/patches-3.8/030-MTD-bcm63xxpart-use-size-macro-for-CFE-block-size.patch
deleted file mode 100644 (file)
index a7f7822..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-From e2092cf1b164ede62b740c7c95905171fb6232ff Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 23 Mar 2013 12:32:56 +0100
-Subject: [PATCH v2 1/3] MTD: bcm63xxpart: use size macro for CFE block size
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/mtd/bcm63xxpart.c |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -27,6 +27,7 @@
- #include <linux/crc32.h>
- #include <linux/module.h>
- #include <linux/kernel.h>
-+#include <linux/sizes.h>
- #include <linux/slab.h>
- #include <linux/vmalloc.h>
- #include <linux/mtd/mtd.h>
-@@ -37,7 +38,7 @@
- #define BCM63XX_EXTENDED_SIZE 0xBFC00000      /* Extended flash address */
--#define BCM63XX_CFE_BLOCK_SIZE        0x10000         /* always at least 64KiB */
-+#define BCM63XX_CFE_BLOCK_SIZE        SZ_64K          /* always at least 64KiB */
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
diff --git a/target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch b/target/linux/brcm63xx/patches-3.8/031-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
deleted file mode 100644 (file)
index 8ff9659..0000000
+++ /dev/null
@@ -1,58 +0,0 @@
-From bda508f975d1372568a4fc9862be501a6176fd46 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sat, 12 May 2012 23:04:17 +0200
-Subject: [PATCH v2 2/3] MIPS: BCM63XX: export PSI size from nvram
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/nvram.c                          |   13 +++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h |    7 +++++++
- 2 files changed, 20 insertions(+)
-
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -15,6 +15,7 @@
- #include <linux/export.h>
- #include <linux/kernel.h>
- #include <linux/if_ether.h>
-+#include <linux/sizes.h>
- #include <bcm63xx_nvram.h>
-@@ -35,6 +36,8 @@ struct bcm963xx_nvram {
-       u32     checksum_high;
- };
-+#define BCM63XX_DEFAULT_PSI_SIZE      SZ_64K
-+
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-@@ -104,3 +107,13 @@ int bcm63xx_nvram_get_mac_address(u8 *ma
-       return 0;
- }
- EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
-+
-+unsigned int bcm63xx_nvram_get_psi_size(void)
-+{
-+      /* max is 64k, but some vendors use higher values */
-+      if (nvram.psi_size > 0 && nvram.psi_size <= 512)
-+              return nvram.psi_size * SZ_1K;
-+
-+      return BCM63XX_DEFAULT_PSI_SIZE;
-+}
-+EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-@@ -30,4 +30,11 @@ u8 *bcm63xx_nvram_get_name(void);
-  */
- int bcm63xx_nvram_get_mac_address(u8 *mac);
-+/**
-+ * bcm63xx_nvram_get_psi_size() - returns the size of the PSI area
-+ *
-+ * Returns the size of the Persitent Storage Information area in bytes.
-+ */
-+unsigned int bcm63xx_nvram_get_psi_size(void);
-+
- #endif /* BCM63XX_NVRAM_H */
diff --git a/target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch b/target/linux/brcm63xx/patches-3.8/032-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
deleted file mode 100644 (file)
index f1c1a0f..0000000
+++ /dev/null
@@ -1,42 +0,0 @@
-From f6eefaa4a08ec27c69485c2fc4db23247b84f8c9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 1 May 2012 14:10:39 +0200
-Subject: [PATCH v2 3/3] MTD: bcm63xxpart: use nvram for PSI size
-
-Read out the SPI size from nvram instead of defaulting to 64K - some
-vendors actually use values larger than the "max" value of 64.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/mtd/bcm63xxpart.c |    6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -4,7 +4,7 @@
-  * Copyright © 2006-2008  Florian Fainelli <florian@openwrt.org>
-  *                      Mike Albon <malbon@openwrt.org>
-  * Copyright © 2009-2010  Daniel Dickinson <openwrt@cshore.neomailbox.net>
-- * Copyright © 2011-2012  Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright © 2011-2013  Jonas Gorski <jonas.gorski@gmail.com>
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-@@ -34,6 +34,7 @@
- #include <linux/mtd/partitions.h>
- #include <linux/bcm963xx_tag.h>
-+#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <asm/mach-bcm63xx/board_bcm963xx.h>
- #define BCM63XX_EXTENDED_SIZE 0xBFC00000      /* Extended flash address */
-@@ -91,7 +92,8 @@ static int bcm63xx_parse_cfe_partitions(
-                             BCM63XX_CFE_BLOCK_SIZE);
-       cfelen = cfe_erasesize;
--      nvramlen = cfe_erasesize;
-+      nvramlen = bcm63xx_nvram_get_psi_size();
-+      nvramlen = roundup(nvramlen, cfe_erasesize);
-       /* Allocate memory for buffer */
-       buf = vmalloc(sizeof(struct bcm_tag));
diff --git a/target/linux/brcm63xx/patches-3.8/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch b/target/linux/brcm63xx/patches-3.8/100-MIPS-BCM63XX-add-USB-host-clock-enable-delay.patch
deleted file mode 100644 (file)
index 63d385b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 80a2f983e9f44dbc3e01ae31c62d877846a7f791 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:19 +0100
-Subject: [PATCH 01/11] MIPS: BCM63XX: add USB host clock enable delay
-
-Knowledge of the clock setup delay should remain at the clock level (so
-it can be clock specific and CPU specific). Add the 100 milliseconds
-required clock delay for the USB host clock when it gets enabled.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -177,6 +177,11 @@ static void usbh_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              msleep(100);
- }
- static struct clk clk_usbh = {
diff --git a/target/linux/brcm63xx/patches-3.8/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch b/target/linux/brcm63xx/patches-3.8/101-MIPS-BCM63XX-add-USB-device-clock-enable-delay-to-cl.patch
deleted file mode 100644 (file)
index eaf7503..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 8e9bf528a122741f0171b89c297b63041116d704 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:20 +0100
-Subject: [PATCH 02/11] MIPS: BCM63XX: add USB device clock enable delay to
- clock code
-
-This patch adds the required 10 micro seconds delay to the USB device
-clock enable operation. Put this where the correct clock knowledege is,
-which is in the clock code, and remove this delay from the bcm63xx_udc
-gadget driver where it was before.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c          |    5 +++++
- drivers/usb/gadget/bcm63xx_udc.c |    1 -
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -199,6 +199,11 @@ static void usbd_set(struct clk *clk, in
-               bcm_hwclock_set(CKCTL_6362_USBD_EN, enable);
-       else if (BCMCPU_IS_6368())
-               bcm_hwclock_set(CKCTL_6368_USBD_EN, enable);
-+      else
-+              return;
-+
-+      if (enable)
-+              udelay(10);
- }
- static struct clk clk_usbd = {
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -386,7 +386,6 @@ static inline void set_clocks(struct bcm
-       if (is_enabled) {
-               clk_enable(udc->usbh_clk);
-               clk_enable(udc->usbd_clk);
--              udelay(10);
-       } else {
-               clk_disable(udc->usbd_clk);
-               clk_disable(udc->usbh_clk);
diff --git a/target/linux/brcm63xx/patches-3.8/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch b/target/linux/brcm63xx/patches-3.8/102-MIPS-BCM63XX-move-code-touching-the-USB-private-regi.patch
deleted file mode 100644 (file)
index 4d00f0e..0000000
+++ /dev/null
@@ -1,151 +0,0 @@
-From ac9b0b574d54be28b300bf99ffe092a2c589484f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:21 +0100
-Subject: [PATCH 03/11] MIPS: BCM63XX: move code touching the USB private
- register
-
-This patch moves the code touching the USB private register in the
-bcm63xx USB gadget driver to arch/mips/bcm63xx/usb-common.c in
-preparation for adding support for OHCI and EHCI host controllers which
-will also touch the USB private register.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/usb-common.c                     |   53 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    9 ++++
- drivers/usb/gadget/bcm63xx_udc.c                   |   27 ++--------
- 4 files changed, 67 insertions(+), 24 deletions(-)
- create mode 100644 arch/mips/bcm63xx/usb-common.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o
-+                 dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -0,0 +1,53 @@
-+/*
-+ * Broadcom BCM63xx common USB device configuration code
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-+ * Copyright (C) 2012 Broadcom Corporation
-+ *
-+ */
-+#include <linux/export.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_device) {
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      } else {
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      }
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+      if (is_device)
-+              val |= USBH_PRIV_SWAP_USBD_MASK;
-+      else
-+              val &= ~USBH_PRIV_SWAP_USBD_MASK;
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
-+
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
-+{
-+      u32 val;
-+
-+      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-+      if (is_on)
-+              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      else
-+              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-+      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+}
-+EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -0,0 +1,9 @@
-+#ifndef BCM63XX_USB_PRIV_H_
-+#define BCM63XX_USB_PRIV_H_
-+
-+#include <linux/types.h>
-+
-+void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
-+void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+
-+#endif /* BCM63XX_USB_PRIV_H_ */
---- a/drivers/usb/gadget/bcm63xx_udc.c
-+++ b/drivers/usb/gadget/bcm63xx_udc.c
-@@ -41,6 +41,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#include <bcm63xx_usb_priv.h>
- #define DRV_MODULE_NAME               "bcm63xx_udc"
-@@ -863,22 +864,7 @@ static void bcm63xx_select_phy_mode(stru
-               bcm_gpio_writel(val, GPIO_PINMUX_OTHR_REG);
-       }
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_device) {
--              val |= (portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      } else {
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_HOSTB_SHIFT);
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      }
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
--
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
--      if (is_device)
--              val |= USBH_PRIV_SWAP_USBD_MASK;
--      else
--              val &= ~USBH_PRIV_SWAP_USBD_MASK;
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+      bcm63xx_usb_priv_select_phy_mode(portmask, is_device);
- }
- /**
-@@ -892,14 +878,9 @@ static void bcm63xx_select_phy_mode(stru
-  */
- static void bcm63xx_select_pullup(struct bcm63xx_udc *udc, bool is_on)
- {
--      u32 val, portmask = BIT(udc->pd->port_no);
-+      u32 portmask = BIT(udc->pd->port_no);
--      val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
--      if (is_on)
--              val &= ~(portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      else
--              val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
--      bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+      bcm63xx_usb_priv_select_pullup(portmask, is_on);
- }
- /**
diff --git a/target/linux/brcm63xx/patches-3.8/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch b/target/linux/brcm63xx/patches-3.8/103-MIPS-BCM63XX-add-OHCI-EHCI-configuration-bits-to-com.patch
deleted file mode 100644 (file)
index 40bbe08..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From 28758a9da77954ed323f86123ef448c6a563c037 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:22 +0100
-Subject: [PATCH 04/11] MIPS: BCM63XX: add OHCI/EHCI configuration bits to
- common USB code
-
-This patch updates the common USB code touching the USB private
-registers with the specific bits to properly enable OHCI and EHCI
-controllers on BCM63xx SoCs. As a result we now need to protect access
-to Read Modify Write sequences using a spinlock because we cannot
-guarantee that any of the exposed helper will not be called
-concurrently.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/usb-common.c                     |   97 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h    |    2 +
- 2 files changed, 99 insertions(+)
-
---- a/arch/mips/bcm63xx/usb-common.c
-+++ b/arch/mips/bcm63xx/usb-common.c
-@@ -5,10 +5,12 @@
-  * License.  See the file "COPYING" in the main directory of this archive
-  * for more details.
-  *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-  * Copyright (C) 2012 Kevin Cernekee <cernekee@gmail.com>
-  * Copyright (C) 2012 Broadcom Corporation
-  *
-  */
-+#include <linux/spinlock.h>
- #include <linux/export.h>
- #include <bcm63xx_cpu.h>
-@@ -16,9 +18,14 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_usb_priv.h>
-+static DEFINE_SPINLOCK(usb_priv_reg_lock);
-+
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_device) {
-@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u3
-       else
-               val &= ~USBH_PRIV_SWAP_USBD_MASK;
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_phy_mode);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
- {
-       u32 val;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-       val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
-       if (is_on)
-@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32
-       else
-               val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
-       bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
- }
- EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
-+
-+/* The following array represents the meaning of the DESC/DATA
-+ * endian swapping with respect to the CPU configured endianness
-+ *
-+ * DATA       ENDN    mmio    descriptor
-+ * 0  0       BE      invalid
-+ * 0  1       BE      LE
-+ * 1  0       BE      BE
-+ * 1  1       BE      invalid
-+ *
-+ * Since BCM63XX SoCs are configured to be in big-endian mode
-+ * we want configuration at line 3.
-+ */
-+void bcm63xx_usb_priv_ohci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6348())
-+              bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+      else if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
-+
-+void bcm63xx_usb_priv_ehci_cfg_set(void)
-+{
-+      u32 reg;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&usb_priv_reg_lock, flags);
-+
-+      if (BCMCPU_IS_6358()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+              /*
-+               * The magic value comes for the original vendor BSP
-+               * and is needed for USB to work. Datasheet does not
-+               * help, so the magic value is used as-is.
-+               */
-+              bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+                              USBH_PRIV_TEST_6358_REG);
-+
-+      } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+              reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+              reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+              reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+              reg |= USBH_PRIV_SETUP_IOC_MASK;
-+              bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+      }
-+
-+      spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
-@@ -5,5 +5,7 @@
- void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
- void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
-+void bcm63xx_usb_priv_ohci_cfg_set(void);
-+void bcm63xx_usb_priv_ehci_cfg_set(void);
- #endif /* BCM63XX_USB_PRIV_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.8/104-MIPS-BCM63XX-introduce-BCM63XX_OHCI-configuration-sy.patch
deleted file mode 100644 (file)
index f2134ba..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From 94ec618bd1a6b07fafbbfc9bcc54e7f9360ff9a0 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:23 +0100
-Subject: [PATCH 05/11] MIPS: BCM63XX: introduce BCM63XX_OHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-OHCI controller, and ensures that all relevant OHCI-related
-configuration options are correctly selected. So far, OHCI support is
-available for the 6328, 6348, 6358 and 6358 SoCs.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |   15 ++++++++++-----
- 1 file changed, 10 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -1,37 +1,43 @@
- menu "CPU support"
-       depends on BCM63XX
-+config BCM63XX_OHCI
-+      bool
-+      select USB_ARCH_HAS_OHCI
-+      select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-+      select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-       select HW_HAS_PCI
--      select USB_ARCH_HAS_OHCI
--      select USB_OHCI_BIG_ENDIAN_DESC
--      select USB_OHCI_BIG_ENDIAN_MMIO
- config BCM63XX_CPU_6345
-       bool "support 6345 CPU"
--      select USB_OHCI_BIG_ENDIAN_DESC
--      select USB_OHCI_BIG_ENDIAN_MMIO
- config BCM63XX_CPU_6348
-       bool "support 6348 CPU"
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select HW_HAS_PCI
-+      select BCM63XX_OHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
diff --git a/target/linux/brcm63xx/patches-3.8/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch b/target/linux/brcm63xx/patches-3.8/105-MIPS-BCM63XX-add-support-for-the-on-chip-OHCI-contro.patch
deleted file mode 100644 (file)
index 732fe94..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From 30d22baef255c99a12c4858ce4ab0d45f0d8c9ae Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:24 +0100
-Subject: [PATCH 06/11] MIPS: BCM63XX: add support for the on-chip OHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip OHCI controller which can be
-driven by the ohci-platform generic driver by using specific power
-on/off/suspend callback to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c                   |   94 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h        |    6 ++
- 3 files changed, 101 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
--                 dev-usb-usbd.o usb-common.o
-+                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,94 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/usb/ohci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ohci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ohci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ohci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ohci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ohci_pdata bcm63xx_ohci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .no_big_frame_no        = 1,
-+      .num_ports              = 1,
-+      .power_on               = bcm63xx_ohci_power_on,
-+      .power_off              = bcm63xx_ohci_power_off,
-+      .power_suspend          = bcm63xx_ohci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+      .name           = "ohci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ohci_resources),
-+      .resource       = ohci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ohci_pdata,
-+              .dma_mask               = &ohci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+      if (BCMCPU_IS_6345() || BCMCPU_IS_6338())
-+              return -ENODEV;
-+
-+      ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+      ohci_resources[0].end = ohci_resources[0].start;
-+      ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+      ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+
-+      return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.8/106-MIPS-BCM63XX-register-OHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 11dafd6..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 33ef960aed15f9a98a2c51d8d794cd72418e0be4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:25 +0100
-Subject: [PATCH 07/11] MIPS: BCM63XX: register OHCI controller if board
- enables it
-
-BCM63XX-based boards can control the registration of the OHCI controller
-by setting their has_ohci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to
-register the OHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -848,6 +849,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-       if (board.has_dsp)
-               bcm63xx_dsp_register(&board.dsp);
diff --git a/target/linux/brcm63xx/patches-3.8/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch b/target/linux/brcm63xx/patches-3.8/107-MIPS-BCM63XX-introduce-BCM63XX_EHCI-configuration-sy.patch
deleted file mode 100644 (file)
index 104ff3c..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-From 00da1683364e58c6430a4577123d01037f8faddc Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:26 +0100
-Subject: [PATCH 08/11] MIPS: BCM63XX: introduce BCM63XX_EHCI configuration
- symbol
-
-This configuration symbol can be used by CPUs supporting the on-chip
-EHCI controller, and ensures that all relevant EHCI-related
-configuration options are selected. So far BCM6328, BCM6358 and BCM6368
-have an EHCI controller and do select this symbol. Update
-drivers/usb/host/Kconfig with BCM63XX to update direct unmet
-dependencies.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Kconfig |    9 +++++++++
- drivers/usb/host/Kconfig  |    5 +++--
- 2 files changed, 12 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -7,10 +7,17 @@ config BCM63XX_OHCI
-       select USB_OHCI_BIG_ENDIAN_DESC if USB_OHCI_HCD
-       select USB_OHCI_BIG_ENDIAN_MMIO if USB_OHCI_HCD
-+config BCM63XX_EHCI
-+      bool
-+      select USB_ARCH_HAS_EHCI
-+      select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-+      select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6338
-       bool "support 6338 CPU"
-@@ -28,16 +35,19 @@ config BCM63XX_CPU_6358
-       bool "support 6358 CPU"
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6362
-       bool "support 6362 CPU"
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- config BCM63XX_CPU_6368
-       bool "support 6368 CPU"
-       select HW_HAS_PCI
-       select BCM63XX_OHCI
-+      select BCM63XX_EHCI
- endmenu
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -115,14 +115,15 @@ config USB_EHCI_BIG_ENDIAN_MMIO
-       depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
-                                   ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-                                   PPC_MPC512x || CPU_CAVIUM_OCTEON || \
--                                  PMC_MSP || SPARC_LEON || MIPS_SEAD3)
-+                                  PMC_MSP || SPARC_LEON || MIPS_SEAD3 || \
-+                                  BCM63XX)
-       default y
- config USB_EHCI_BIG_ENDIAN_DESC
-       bool
-       depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
-                                   PPC_MPC512x || PMC_MSP || SPARC_LEON || \
--                                  MIPS_SEAD3)
-+                                  MIPS_SEAD3 || BCM63XX)
-       default y
- config XPS_USB_HCD_XILINX
diff --git a/target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch b/target/linux/brcm63xx/patches-3.8/108-MIPS-BCM63XX-add-support-for-the-on-chip-EHCI-contro.patch
deleted file mode 100644 (file)
index ef4ba17..0000000
+++ /dev/null
@@ -1,136 +0,0 @@
-From e38f13bd6408769c0b565bb1079024f496eee121 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:27 +0100
-Subject: [PATCH 09/11] MIPS: BCM63XX: add support for the on-chip EHCI
- controller
-
-Broadcom BCM63XX SoCs include an on-chip EHCI controller which can be
-driven by the generic ehci-platform driver by using specific power
-on/off/suspend callbacks to manage clocks and hardware specific
-configuration.
-
-Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/dev-usb-ehci.c                   |   92 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h        |    6 ++
- 3 files changed, 99 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,92 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2013 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/usb/ehci_pdriver.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_usb_priv.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static u64 ehci_dmamask = DMA_BIT_MASK(32);
-+
-+static struct clk *usb_host_clock;
-+
-+static int bcm63xx_ehci_power_on(struct platform_device *pdev)
-+{
-+      usb_host_clock = clk_get(&pdev->dev, "usbh");
-+      if (IS_ERR_OR_NULL(usb_host_clock))
-+              return -ENODEV;
-+
-+      clk_prepare_enable(usb_host_clock);
-+
-+      bcm63xx_usb_priv_ehci_cfg_set();
-+
-+      return 0;
-+}
-+
-+static void bcm63xx_ehci_power_off(struct platform_device *pdev)
-+{
-+      if (!IS_ERR_OR_NULL(usb_host_clock)) {
-+              clk_disable_unprepare(usb_host_clock);
-+              clk_put(usb_host_clock);
-+      }
-+}
-+
-+static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-+      .big_endian_desc        = 1,
-+      .big_endian_mmio        = 1,
-+      .power_on               = bcm63xx_ehci_power_on,
-+      .power_off              = bcm63xx_ehci_power_off,
-+      .power_suspend          = bcm63xx_ehci_power_off,
-+};
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+      .name           = "ehci-platform",
-+      .id             = -1,
-+      .num_resources  = ARRAY_SIZE(ehci_resources),
-+      .resource       = ehci_resources,
-+      .dev            = {
-+              .platform_data          = &bcm63xx_ehci_pdata,
-+              .dma_mask               = &ehci_dmamask,
-+              .coherent_dma_mask      = DMA_BIT_MASK(32),
-+      },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return 0;
-+
-+      ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+      ehci_resources[0].end = ehci_resources[0].start;
-+      ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+      ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+
-+      return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch b/target/linux/brcm63xx/patches-3.8/109-MIPS-BCM63XX-register-EHCI-controller-if-board-enabl.patch
deleted file mode 100644 (file)
index 703f2a4..0000000
+++ /dev/null
@@ -1,36 +0,0 @@
-From 709ef2034f5ba06da35f89856ad7baf2b7a41287 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:28 +0100
-Subject: [PATCH 10/11] MIPS: BCM63XX: register EHCI controller if board
- enables it
-
-BCM63XX-based board can control the registration of the EHCI controller
-by setting their has_ehci0 flag to 1. Handle this in the generic
-code dealing with board registration and call the actual helper to register
-the EHCI controller.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-@@ -849,6 +850,9 @@ int __init board_register_devices(void)
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-       if (board.has_ohci0)
-               bcm63xx_ohci_register();
diff --git a/target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch b/target/linux/brcm63xx/patches-3.8/110-MIPS-BCM63XX-EHCI-controller-does-not-support-overcu.patch
deleted file mode 100644 (file)
index 6d91129..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 111bbd770441ab34f9da5bb1d85767a9b75227b4 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Mon, 28 Jan 2013 20:06:30 +0100
-Subject: [PATCH 12/12] MIPS: BCM63XX: EHCI controller does not support
- overcurrent
-
-This patch sets the ignore_oc flag for the BCM63XX EHCI controller as it
-does not support proper overcurrent reporting.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-usb-ehci.c |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -61,6 +61,7 @@ static void bcm63xx_ehci_power_off(struc
- static struct usb_ehci_pdata bcm63xx_ehci_pdata = {
-       .big_endian_desc        = 1,
-       .big_endian_mmio        = 1,
-+      .ignore_oc              = 1,
-       .power_on               = bcm63xx_ehci_power_on,
-       .power_off              = bcm63xx_ehci_power_off,
-       .power_suspend          = bcm63xx_ehci_power_off,
diff --git a/target/linux/brcm63xx/patches-3.8/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-3.8/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
deleted file mode 100644 (file)
index 00dc9c9..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 1 Jul 2011 23:16:47 +0200
-Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- include/linux/spi/flash.h |    5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -2,7 +2,7 @@
- #define LINUX_SPI_FLASH_H
- struct mtd_partition;
--
-+struct mtd_part_parser_data;
- /**
-  * struct flash_platform_data: board-specific flash data
-  * @name: optional flash device name (eg, as used with mtdparts=)
-@@ -10,6 +10,8 @@ struct mtd_partition;
-  * @nr_parts: number of mtd_partitions for static partitoning
-  * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
-  *    with chips that can't be queried for JEDEC or other IDs
-+ * @part_probe_types: optional list of MTD parser names to use for
-+ *    partitioning
-  *
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-@@ -25,6 +27,7 @@ struct flash_platform_data {
-       char            *type;
-+      const char      **part_probe_types;
-       /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/brcm63xx/patches-3.8/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.8/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
deleted file mode 100644 (file)
index fcf5686..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 16:53:08 +0100
-Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
- platform data
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -988,7 +988,8 @@ static int m25p_probe(struct spi_device
-       /* partitions should match sector boundaries; and it may be good to
-        * use readonly partitions for writeprotected sectors (BP2..BP0).
-        */
--      return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
-+      return mtd_device_parse_register(&flash->mtd,
-+                      data ? data->part_probe_types : NULL, &ppdata,
-                       data ? data->parts : NULL,
-                       data ? data->nr_parts : 0);
- }
diff --git a/target/linux/brcm63xx/patches-3.8/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.8/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
deleted file mode 100644 (file)
index 7e285b9..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 17:33:40 +0100
-Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c |   29 +++++++++++++++++++++++++++--
- include/linux/spi/flash.h    |    4 ++++
- 2 files changed, 31 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -93,6 +93,7 @@ struct m25p {
-       u8                      erase_opcode;
-       u8                      *command;
-       bool                    fast_read;
-+      int                     max_transfer_len;
- };
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -337,10 +338,9 @@ static int m25p80_erase(struct mtd_info
-  * Read an address range from the flash chip.  The address range
-  * may be any size provided it is within the physical boundaries.
-  */
--static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
-       size_t *retlen, u_char *buf)
- {
--      struct m25p *flash = mtd_to_m25p(mtd);
-       struct spi_transfer t[2];
-       struct spi_message m;
-       uint8_t opcode;
-@@ -392,6 +392,28 @@ static int m25p80_read(struct mtd_info *
-       return 0;
- }
-+static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+      size_t *retlen, u_char *buf)
-+{
-+      struct m25p *flash = mtd_to_m25p(mtd);
-+      size_t off;
-+      size_t read_len = flash->max_transfer_len;
-+      size_t part_len;
-+      int ret = 0;
-+
-+      if (!read_len)
-+              return __m25p80_read(flash, from, len, retlen, buf);
-+
-+      *retlen = 0;
-+
-+      for (off = 0; off < len && !ret; off += read_len) {
-+              ret = __m25p80_read(flash, from + off, min(len - off, read_len),
-+                                  &part_len, buf + off);
-+                      *retlen += part_len;
-+      }
-+
-+      return ret;
-+}
- /*
-  * Write an address range to the flash chip.  Data must be written in
-  * FLASH_PAGESIZE chunks.  The address range may be any size provided
-@@ -889,6 +911,9 @@ static int m25p_probe(struct spi_device
-               return -ENOMEM;
-       }
-+      if (data)
-+              flash->max_transfer_len = data->max_transfer_len;
-+
-       flash->spi = spi;
-       mutex_init(&flash->lock);
-       dev_set_drvdata(&spi->dev, flash);
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
-  * @part_probe_types: optional list of MTD parser names to use for
-  *    partitioning
-  *
-+ * @max_transfer_len: option maximum read/write length limitation for
-+ *    SPI controllers not able to transfer any length commands.
-  * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
-  * provide information about SPI flash parts (such as DataFlash) to
-  * help set up the device and its appropriate default partitioning.
-@@ -28,6 +30,8 @@ struct flash_platform_data {
-       char            *type;
-       const char      **part_probe_types;
-+
-+      unsigned int    max_transfer_len;
-       /* we'll likely add more ... use JEDEC IDs, etc */
- };
diff --git a/target/linux/brcm63xx/patches-3.8/300-reset_buttons.patch b/target/linux/brcm63xx/patches-3.8/300-reset_buttons.patch
deleted file mode 100644 (file)
index 4415836..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,8 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -32,6 +34,9 @@
- #define PFX   "board_bcm963xx: "
-+#define BCM963XX_KEYS_POLL_INTERVAL   20
-+#define BCM963XX_KEYS_DEBOUNCE_INTERVAL       (BCM963XX_KEYS_POLL_INTERVAL * 3)
-+
- static struct board_info board;
- /*
-@@ -343,6 +348,16 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_96348gw = {
-@@ -401,6 +416,16 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_FAST2404 = {
-@@ -825,11 +850,23 @@ static struct platform_device bcm63xx_gp
-       .dev.platform_data      = &bcm63xx_led_data,
- };
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+      .poll_interval  = BCM963XX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+      .name           = "gpio-keys-polled",
-+      .id             = 0,
-+      .dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
- /*
-  * third stage init callback, register all board devices.
-  */
- int __init board_register_devices(void)
- {
-+      int button_count = 0;
-+
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -881,5 +918,16 @@ int __init board_register_devices(void)
-       platform_device_register(&bcm63xx_gpio_leds);
-+      /* count number of BUTTONs defined by this device */
-+      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+              button_count++;
-+
-+      if (button_count) {
-+              bcm63xx_gpio_keys_data.nbuttons = button_count;
-+              bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+              platform_device_register(&bcm63xx_gpio_keys_device);
-+      }
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -3,6 +3,7 @@
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
-@@ -45,6 +46,9 @@ struct board_info {
-       /* GPIO LEDs */
-       struct gpio_led leds[5];
-+
-+      /* Buttons */
-+      struct gpio_keys_button buttons[4];
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/301-led_count.patch b/target/linux/brcm63xx/patches-3.8/301-led_count.patch
deleted file mode 100644 (file)
index c85405a..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -866,6 +866,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
-       int button_count = 0;
-+      int led_count = 0;
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -913,10 +914,16 @@ int __init board_register_devices(void)
-       bcm63xx_flash_register();
--      bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
--      bcm63xx_led_data.leds = board.leds;
-+      /* count number of LEDs defined by this device */
-+      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+              led_count++;
-+
-+      if (led_count) {
-+              bcm63xx_led_data.num_leds = led_count;
-+              bcm63xx_led_data.leds = board.leds;
--      platform_device_register(&bcm63xx_gpio_leds);
-+              platform_device_register(&bcm63xx_gpio_leds);
-+      }
-       /* count number of BUTTONs defined by this device */
-       while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -45,7 +45,7 @@ struct board_info {
-       struct bcm63xx_dsp_platform_data dsp;
-       /* GPIO LEDs */
--      struct gpio_led leds[5];
-+      struct gpio_led leds[14];
-       /* Buttons */
-       struct gpio_keys_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.8/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.8/302-extended-platform-devices.patch
deleted file mode 100644 (file)
index 54cddc4..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,6 +912,9 @@ int __init board_register_devices(void)
-       bcm63xx_spi_register();
-+      if (board.num_devs)
-+              platform_add_devices(board.devs, board.num_devs);
-+
-       bcm63xx_flash_register();
-       /* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -49,6 +49,10 @@ struct board_info {
-       /* Buttons */
-       struct gpio_keys_button buttons[4];
-+
-+      /* Additional platform devices */
-+      struct platform_device **devs;
-+      unsigned int    num_devs;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/303-spi-board-info.patch b/target/linux/brcm63xx/patches-3.8/303-spi-board-info.patch
deleted file mode 100644 (file)
index a1ba0cc..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -915,6 +916,9 @@ int __init board_register_devices(void)
-       if (board.num_devs)
-               platform_add_devices(board.devs, board.num_devs);
-+      if (board.num_spis)
-+              spi_register_board_info(board.spis, board.num_spis);
-+
-       bcm63xx_flash_register();
-       /* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -53,6 +53,10 @@ struct board_info {
-       /* Additional platform devices */
-       struct platform_device **devs;
-       unsigned int    num_devs;
-+
-+      /* Additional platform devices */
-+      struct spi_board_info *spis;
-+      unsigned int    num_spis;
- };
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/304-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.8/304-boardid_fixup.patch
deleted file mode 100644 (file)
index f29ad6f..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -33,11 +33,16 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <uapi/linux/bcm963xx_tag.h>
-+
- #define PFX   "board_bcm963xx: "
- #define BCM963XX_KEYS_POLL_INTERVAL   20
- #define BCM963XX_KEYS_DEBOUNCE_INTERVAL       (BCM963XX_KEYS_POLL_INTERVAL * 3)
-+#define CFE_OFFSET_64K                        0x10000
-+#define CFE_OFFSET_128K                       0x20000
-+
- static struct board_info board;
- /*
-@@ -742,6 +747,30 @@ const char *board_get_name(void)
-       return board.name;
- }
-+static void __init boardid_fixup(u8 *boot_addr)
-+{
-+      struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+      char *board_name = (char *)bcm63xx_nvram_get_name();
-+
-+      /* check if bcm_tag is at 64k offset */
-+      if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-+              /* else try 128k */
-+              tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-+              if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-+                      /* No tag found */
-+                      printk(KERN_DEBUG "No bcm_tag found!\n");
-+                      return;
-+              }
-+      }
-+      /* check if we should override the boardid */
-+      if (tag->information1[0] != '+')
-+              return;
-+
-+      strncpy(board_name, &tag->information1[1], BOARDID_LEN);
-+
-+      printk(KERN_INFO "Overriding boardid with '%s'\n", board_name);
-+}
-+
- /*
-  * early init callback, read nvram data from flash and checksum it
-  */
-@@ -775,6 +804,11 @@ void __init board_prom_init(void)
-       bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET);
-+      if (strcmp(cfe_version, "unknown") != 0) {
-+              /* cfe present */
-+              boardid_fixup(boot_addr);
-+      }
-+
-       board_name = bcm63xx_nvram_get_name();
-       /* find board by name */
-       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
diff --git a/target/linux/brcm63xx/patches-3.8/305-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.8/305-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
deleted file mode 100644 (file)
index 1418d65..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-From c110865541e2d3782c412af9d48c016de5a64d9c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 14 Jun 2011 21:14:39 +0200
-Subject: [PATCH 42/79] MIPS: BCM63XX: allow second UART on BCM6328
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-uart.c |    3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ b/arch/mips/bcm63xx/dev-uart.c
-@@ -54,7 +54,8 @@ int __init bcm63xx_uart_register(unsigne
-       if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
-               return -ENODEV;
--      if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368()))
-+      if (id == 1 && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+          !BCMCPU_IS_6368())
-               return -ENODEV;
-       if (id == 0) {
diff --git a/target/linux/brcm63xx/patches-3.8/306-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch b/target/linux/brcm63xx/patches-3.8/306-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch
deleted file mode 100644 (file)
index 6b3b980..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-From 5aeb6273a610f8aab090b3499827177eb41311ba Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:09 +0100
-Subject: [PATCH 53/79] MIPS: BCM63XX: expose the HS SPI clock
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c |   22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -236,6 +236,26 @@ static struct clk clk_spi = {
- };
- /*
-+ * SPI clock
-+ */
-+static void hsspi_set(struct clk *clk, int enable)
-+{
-+      u32 mask;
-+
-+      if (BCMCPU_IS_6328())
-+              mask = CKCTL_6328_HSSPI_EN;
-+      else
-+              return;
-+
-+      bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_hsspi = {
-+      .set    = hsspi_set,
-+};
-+
-+
-+/*
-  * XTM clock
-  */
- static void xtm_set(struct clk *clk, int enable)
-@@ -344,6 +364,8 @@ struct clk *clk_get(struct device *dev,
-               return &clk_usbd;
-       if (!strcmp(id, "spi"))
-               return &clk_spi;
-+      if (!strcmp(id, "hsspi"))
-+              return &clk_hsspi;
-       if (!strcmp(id, "xtm"))
-               return &clk_xtm;
-       if (!strcmp(id, "periph"))
diff --git a/target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-add-HSSPI-register-definitions.patch b/target/linux/brcm63xx/patches-3.8/307-MIPS-BCM63XX-add-HSSPI-register-definitions.patch
deleted file mode 100644 (file)
index 1749127..0000000
+++ /dev/null
@@ -1,211 +0,0 @@
-From 70f970222bc1096689ae1bffeb9ed09a7c4bed07 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 28/60] MIPS: BCM63XX: add HSSPI register definitions
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h  |   18 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   47 +++++++++++++++++++++
- 2 files changed, 65 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -131,6 +131,7 @@ enum bcm63xx_regs_set {
-       RSET_UART1,
-       RSET_GPIO,
-       RSET_SPI,
-+      RSET_HSSPI,
-       RSET_UDC0,
-       RSET_OHCI0,
-       RSET_OHCI_PRIV,
-@@ -176,6 +177,7 @@ enum bcm63xx_regs_set {
- #define RSET_ENETDMA_SIZE             2048
- #define RSET_ENETSW_SIZE              65536
- #define RSET_UART_SIZE                        24
-+#define RSET_HSSPI_SIZE                       1536
- #define RSET_UDC_SIZE                 256
- #define RSET_OHCI_SIZE                        256
- #define RSET_EHCI_SIZE                        256
-@@ -201,6 +203,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_UART1_BASE           (0xb0000120)
- #define BCM_6328_GPIO_BASE            (0xb0000080)
- #define BCM_6328_SPI_BASE             (0xdeadbeef)
-+#define BCM_6328_HSSPI_BASE           (0xb0001000)
- #define BCM_6328_UDC0_BASE            (0xdeadbeef)
- #define BCM_6328_USBDMA_BASE          (0xb000c000)
- #define BCM_6328_OHCI0_BASE           (0xb0002600)
-@@ -247,6 +250,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE           (0xdeadbeef)
- #define BCM_6338_GPIO_BASE            (0xfffe0400)
- #define BCM_6338_SPI_BASE             (0xfffe0c00)
-+#define BCM_6338_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6338_UDC0_BASE            (0xdeadbeef)
- #define BCM_6338_USBDMA_BASE          (0xfffe2400)
- #define BCM_6338_OHCI0_BASE           (0xdeadbeef)
-@@ -294,6 +298,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE           (0xdeadbeef)
- #define BCM_6345_GPIO_BASE            (0xfffe0400)
- #define BCM_6345_SPI_BASE             (0xdeadbeef)
-+#define BCM_6345_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6345_UDC0_BASE            (0xdeadbeef)
- #define BCM_6345_USBDMA_BASE          (0xfffe2800)
- #define BCM_6345_ENET0_BASE           (0xfffe1800)
-@@ -340,6 +345,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_UART1_BASE           (0xdeadbeef)
- #define BCM_6348_GPIO_BASE            (0xfffe0400)
- #define BCM_6348_SPI_BASE             (0xfffe0c00)
-+#define BCM_6348_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6348_UDC0_BASE            (0xfffe1000)
- #define BCM_6348_USBDMA_BASE          (0xdeadbeef)
- #define BCM_6348_OHCI0_BASE           (0xfffe1b00)
-@@ -385,6 +391,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE           (0xfffe0120)
- #define BCM_6358_GPIO_BASE            (0xfffe0080)
- #define BCM_6358_SPI_BASE             (0xfffe0800)
-+#define BCM_6358_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6358_UDC0_BASE            (0xfffe0800)
- #define BCM_6358_USBDMA_BASE          (0xdeadbeef)
- #define BCM_6358_OHCI0_BASE           (0xfffe1400)
-@@ -487,6 +494,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_UART1_BASE           (0xb0000120)
- #define BCM_6368_GPIO_BASE            (0xb0000080)
- #define BCM_6368_SPI_BASE             (0xb0000800)
-+#define BCM_6368_HSSPI_BASE           (0xdeadbeef)
- #define BCM_6368_UDC0_BASE            (0xdeadbeef)
- #define BCM_6368_USBDMA_BASE          (0xb0004800)
- #define BCM_6368_OHCI0_BASE           (0xb0001600)
-@@ -538,6 +546,7 @@ extern const unsigned long *bcm63xx_regs
-       __GEN_RSET_BASE(__cpu, UART1)                                   \
-       __GEN_RSET_BASE(__cpu, GPIO)                                    \
-       __GEN_RSET_BASE(__cpu, SPI)                                     \
-+      __GEN_RSET_BASE(__cpu, HSSPI)                                   \
-       __GEN_RSET_BASE(__cpu, UDC0)                                    \
-       __GEN_RSET_BASE(__cpu, OHCI0)                                   \
-       __GEN_RSET_BASE(__cpu, OHCI_PRIV)                               \
-@@ -581,6 +590,7 @@ extern const unsigned long *bcm63xx_regs
-       [RSET_UART1]            = BCM_## __cpu ##_UART1_BASE,           \
-       [RSET_GPIO]             = BCM_## __cpu ##_GPIO_BASE,            \
-       [RSET_SPI]              = BCM_## __cpu ##_SPI_BASE,             \
-+      [RSET_HSSPI]            = BCM_## __cpu ##_HSSPI_BASE,           \
-       [RSET_UDC0]             = BCM_## __cpu ##_UDC0_BASE,            \
-       [RSET_OHCI0]            = BCM_## __cpu ##_OHCI0_BASE,           \
-       [RSET_OHCI_PRIV]        = BCM_## __cpu ##_OHCI_PRIV_BASE,       \
-@@ -658,6 +668,7 @@ enum bcm63xx_irq {
-       IRQ_ENET0,
-       IRQ_ENET1,
-       IRQ_ENET_PHY,
-+      IRQ_HSSPI,
-       IRQ_OHCI0,
-       IRQ_EHCI0,
-       IRQ_USBD,
-@@ -700,6 +711,7 @@ enum bcm63xx_irq {
- #define BCM_6328_ENET0_IRQ            0
- #define BCM_6328_ENET1_IRQ            0
- #define BCM_6328_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6328_HSSPI_IRQ            (IRQ_INTERNAL_BASE + 29)
- #define BCM_6328_OHCI0_IRQ            (BCM_6328_HIGH_IRQ_BASE + 9)
- #define BCM_6328_EHCI0_IRQ            (BCM_6328_HIGH_IRQ_BASE + 10)
- #define BCM_6328_USBD_IRQ             (IRQ_INTERNAL_BASE + 4)
-@@ -745,6 +757,7 @@ enum bcm63xx_irq {
- #define BCM_6338_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6338_ENET1_IRQ            0
- #define BCM_6338_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6338_HSSPI_IRQ            0
- #define BCM_6338_OHCI0_IRQ            0
- #define BCM_6338_EHCI0_IRQ            0
- #define BCM_6338_USBD_IRQ             0
-@@ -783,6 +796,7 @@ enum bcm63xx_irq {
- #define BCM_6345_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET1_IRQ            0
- #define BCM_6345_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6345_HSSPI_IRQ            0
- #define BCM_6345_OHCI0_IRQ            0
- #define BCM_6345_EHCI0_IRQ            0
- #define BCM_6345_USBD_IRQ             0
-@@ -821,6 +835,7 @@ enum bcm63xx_irq {
- #define BCM_6348_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET1_IRQ            (IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6348_HSSPI_IRQ            0
- #define BCM_6348_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 12)
- #define BCM_6348_EHCI0_IRQ            0
- #define BCM_6348_USBD_IRQ             0
-@@ -859,6 +874,7 @@ enum bcm63xx_irq {
- #define BCM_6358_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
- #define BCM_6358_ENET1_IRQ            (IRQ_INTERNAL_BASE + 6)
- #define BCM_6358_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6358_HSSPI_IRQ            0
- #define BCM_6358_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 5)
- #define BCM_6358_EHCI0_IRQ            (IRQ_INTERNAL_BASE + 10)
- #define BCM_6358_USBD_IRQ             0
-@@ -971,6 +987,7 @@ enum bcm63xx_irq {
- #define BCM_6368_ENET0_IRQ            0
- #define BCM_6368_ENET1_IRQ            0
- #define BCM_6368_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6368_HSSPI_IRQ            0
- #define BCM_6368_OHCI0_IRQ            (IRQ_INTERNAL_BASE + 5)
- #define BCM_6368_EHCI0_IRQ            (IRQ_INTERNAL_BASE + 7)
- #define BCM_6368_USBD_IRQ             (IRQ_INTERNAL_BASE + 8)
-@@ -1018,6 +1035,7 @@ extern const int *bcm63xx_irqs;
-       [IRQ_ENET0]             = BCM_## __cpu ##_ENET0_IRQ,            \
-       [IRQ_ENET1]             = BCM_## __cpu ##_ENET1_IRQ,            \
-       [IRQ_ENET_PHY]          = BCM_## __cpu ##_ENET_PHY_IRQ,         \
-+      [IRQ_HSSPI]             = BCM_## __cpu ##_HSSPI_IRQ,            \
-       [IRQ_OHCI0]             = BCM_## __cpu ##_OHCI0_IRQ,            \
-       [IRQ_EHCI0]             = BCM_## __cpu ##_EHCI0_IRQ,            \
-       [IRQ_USBD]              = BCM_## __cpu ##_USBD_IRQ,             \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1434,4 +1434,51 @@
- #define PCIE_DEVICE_OFFSET            0x8000
-+/*************************************************************************
-+ * _REG relative to RSET_HSSPI
-+ *************************************************************************/
-+
-+#define HSSPI_GLOBAL_CTRL_REG                 0x0
-+#define GLOBAL_CTRL_CLK_POLARITY              (1 << 17)
-+#define GLOBAL_CTRL_CLK_GATE_SSOFF            (1 << 16)
-+
-+#define HSSPI_GLOBAL_EXT_TRIGGER_REG          0x4
-+
-+#define HSSPI_INT_STATUS_REG                  0x8
-+#define HSSPI_INT_STATUS_MASKED_REG           0xc
-+#define HSSPI_INT_MASK_REG                    0x10
-+
-+#define HSSPI_PING0_CMD_DONE                  (1 << 0)
-+
-+#define HSSPI_INT_CLEAR_ALL                   0xff001f1f
-+
-+#define HSSPI_PINGPONG_COMMAND_REG(x)         (0x80 + (x) * 0x40)
-+#define PINGPONG_CMD_COMMAND_MASK             0xf
-+#define PINGPONG_COMMAND_NOOP                 0
-+#define PINGPONG_COMMAND_START_NOW            1
-+#define PINGPONG_COMMAND_START_TRIGGER                2
-+#define PINGPONG_COMMAND_HALT                 3
-+#define PINGPONG_COMMAND_FLUSH                        4
-+#define PINGPONG_CMD_PROFILE_SHIFT            8
-+#define PINGPONG_CMD_SS_SHIFT                 12
-+
-+#define HSSPI_PINGPONG_STATUS_REG(x)          (0x84 + (x) * 0x40)
-+
-+#define HSSPI_PROFILE_CLK_CTRL_REG(x)         (0x100 + (x) * 0x20)
-+#define CLK_CTRL_ACCUM_RST_ON_LOOP            (1 << 15)
-+
-+#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x)      (0x104 + (x) * 0x20)
-+#define SIGNAL_CTRL_LATCH_RISING              (1 << 12)
-+#define SIGNAL_CTRL_LAUNCH_RISING             (1 << 13)
-+#define SIGNAL_CTRL_ASYNC_INPUT_PATH          (1 << 16)
-+
-+#define HSSPI_PROFILE_MODE_CTRL_REG(x)                (0x108 + (x) * 0x20)
-+#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT     8
-+#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT     12
-+#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT     16
-+#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT     18
-+#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT               24
-+
-+#define HSSPI_FIFO_REG(x)                     (0x200 + (x) * 0x200)
-+
- #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/308-board_leds_naming.patch b/target/linux/brcm63xx/patches-3.8/308-board_leds_naming.patch
deleted file mode 100644 (file)
index c441bf1..0000000
+++ /dev/null
@@ -1,267 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -112,28 +112,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl",
-+                      .name           = "96338GW:green:adsl",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ses",
-+                      .name           = "96338GW:green:ses",
-                       .gpio           = 5,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96338GW:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96338GW:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96338GW:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               }
-@@ -153,28 +153,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl",
-+                      .name           = "96338W:green:adsl",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ses",
-+                      .name           = "96338W:green:ses",
-                       .gpio           = 5,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96338W:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96338W:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96338W:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -213,29 +213,29 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348R:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348R:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348R:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348R:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348R:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -274,28 +274,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348GW-10:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348GW-10:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348GW-10:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348GW-10:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348GW-10:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -328,28 +328,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348GW-11:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348GW-11:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348GW-11:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348GW-11:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348GW-11:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -396,28 +396,28 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96348GW:green:adsl-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96348GW:green:ppp",
-                       .gpio           = 3,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96348GW:green:ppp-fail",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96348GW:green:power",
-                       .gpio           = 0,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96348GW:green:stop",
-                       .gpio           = 1,
-                       .active_low     = 1,
-               },
-@@ -549,27 +549,27 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl-fail",
-+                      .name           = "96358VW:green:adsl-fail",
-                       .gpio           = 15,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp",
-+                      .name           = "96358VW:green:ppp",
-                       .gpio           = 22,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96358VW:green:ppp-fail",
-                       .gpio           = 23,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96358VW:green:power",
-                       .gpio           = 4,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96358VW:green:stop",
-                       .gpio           = 5,
-               },
-       },
-@@ -601,22 +601,22 @@ static struct board_info __initdata boar
-       .leds = {
-               {
--                      .name           = "adsl",
-+                      .name           = "96358VW2:green:adsl",
-                       .gpio           = 22,
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "ppp-fail",
-+                      .name           = "96358VW2:green:ppp-fail",
-                       .gpio           = 23,
-               },
-               {
--                      .name           = "power",
-+                      .name           = "96358VW2:green:power",
-                       .gpio           = 5,
-                       .active_low     = 1,
-                       .default_trigger = "default-on",
-               },
-               {
--                      .name           = "stop",
-+                      .name           = "96358VW2:green:stop",
-                       .gpio           = 4,
-                       .active_low     = 1,
-               },
diff --git a/target/linux/brcm63xx/patches-3.8/309-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.8/309-cfe_version_mod.patch
deleted file mode 100644 (file)
index 9482b6b..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -798,6 +798,8 @@ void __init board_prom_init(void)
-       if (!memcmp(cfe, "cfe-v", 5))
-               snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
-                        cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+      else if (!memcmp(cfe, "cfe-", 4))
-+              snprintf(cfe_version, 16, "%s", (char *) &cfe[4]);
-       else
-               strcpy(cfe_version, "unknown");
-       printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
diff --git a/target/linux/brcm63xx/patches-3.8/310-BCM63XX-Add-SMP-support-to-prom.c.patch b/target/linux/brcm63xx/patches-3.8/310-BCM63XX-Add-SMP-support-to-prom.c.patch
deleted file mode 100644 (file)
index 7c9baf7..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
-From 10ea7fd6b854c3ecf745d053beba10c7e00c33c9 Mon Sep 17 00:00:00 2001
-From: Kevin Cernekee <cernekee@gmail.com>
-Date: Sat, 9 Jul 2011 12:15:06 -0700
-Subject: [PATCH 01/13] MIPS: BCM63XX: Add SMP support to prom.c
-
-This involves two changes to the BSP code:
-
-1) register_smp_ops() for BMIPS SMP
-
-2) The CPU1 boot vector on some of the BCM63xx platforms conflicts with
-the special interrupt vector (IV).  Move it to 0x8000_0380 at boot time,
-to resolve the conflict.
-
-Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
-[jogo@openwrt: move smp ops registration below #ifdef guard, don't enable
- smp for 6328/6358]
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/prom.c |   33 +++++++++++++++++++++++++++++++++
- 1 file changed, 33 insertions(+)
-
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -8,7 +8,11 @@
- #include <linux/init.h>
- #include <linux/bootmem.h>
-+#include <linux/smp.h>
- #include <asm/bootinfo.h>
-+#include <asm/bmips.h>
-+#include <asm/smp-ops.h>
-+#include <asm/mipsregs.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_io.h>
-@@ -52,6 +56,35 @@ void __init prom_init(void)
-       /* do low level board init */
-       board_prom_init();
-+
-+#if defined(CONFIG_CPU_BMIPS4350) && defined(CONFIG_SMP)
-+      /* set up SMP */
-+      register_smp_ops(&bmips_smp_ops);
-+
-+      /*
-+       * BCM6328 does not have its second CPU enabled, while BCM6358
-+       * needs special handling for its shared TLB, so disable SMP for now.
-+       */
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6358()) {
-+              bmips_smp_enabled = 0;
-+              return;
-+      }
-+
-+      /*
-+       * The bootloader has set up the CPU1 reset vector at 0xa000_0200.
-+       * This conflicts with the special interrupt vector (IV).
-+       * The bootloader has also set up CPU1 to respond to the wrong
-+       * IPI interrupt.
-+       * Here we will start up CPU1 in the background and ask it to
-+       * reconfigure itself then go back to sleep.
-+       */
-+      memcpy((void *)0xa0000200, &bmips_smp_movevec, 0x20);
-+      __sync();
-+      set_c0_cause(C_SW0);
-+      cpumask_set_cpu(1, &bmips_booted_mask);
-+
-+      /* FIXME: we really should have some sort of hazard barrier here */
-+#endif
- }
- void __init prom_free_prom_memory(void)
diff --git a/target/linux/brcm63xx/patches-3.8/311-MIPS-BCM63XX-Handle-SW-IRQs-0-1.patch b/target/linux/brcm63xx/patches-3.8/311-MIPS-BCM63XX-Handle-SW-IRQs-0-1.patch
deleted file mode 100644 (file)
index f08c7ef..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 8e0bd819cc0f8815cad99feea98664172c0b1fe4 Mon Sep 17 00:00:00 2001
-From: Kevin Cernekee <cernekee@gmail.com>
-Date: Mon, 31 Oct 2011 11:52:10 -0700
-Subject: [PATCH 02/13] MIPS: BCM63XX: Handle SW IRQs 0-1
-
-MIPS software IRQs 0 and 1 are used for interprocessor signaling (IPI)
-on BMIPS SMP.  Make the board support code aware of them.
-
-Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
-[jogo@openwrt.org: move sw irqs behind timer irq]
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |    4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -294,6 +294,10 @@ asmlinkage void plat_irq_dispatch(void)
-               if (cause & CAUSEF_IP7)
-                       do_IRQ(7);
-+              if (cause & CAUSEF_IP0)
-+                      do_IRQ(0);
-+              if (cause & CAUSEF_IP1)
-+                      do_IRQ(1);
-               if (cause & CAUSEF_IP2)
-                       dispatch_internal();
-               if (!is_ext_irq_cascaded) {
diff --git a/target/linux/brcm63xx/patches-3.8/312-MIPS-BCM63XX-select-SYS_HAS_CPU_BMIPS4350-for-suppor.patch b/target/linux/brcm63xx/patches-3.8/312-MIPS-BCM63XX-select-SYS_HAS_CPU_BMIPS4350-for-suppor.patch
deleted file mode 100644 (file)
index ce0e769..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-From 1923ce1435a5e89f9550e8c95db37a3ef1f92665 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 21 Apr 2013 14:44:00 +0200
-Subject: [PATCH 03/13] MIPS: BCM63XX: select SYS_HAS_CPU_BMIPS4350 for
- supported SoCs
-
-BCM6338, BCM6345 and BCM6348 have a BMIPS3300, everything following
-has a BMIPS4350.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/Kconfig |    1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -126,6 +126,7 @@ config BCM63XX
-       select DMA_NONCOHERENT
-       select IRQ_CPU
-       select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_CPU_BMIPS4350 if !BCM63XX_CPU_6338 && !BCM63XX_CPU_6345 && !BCM63XX_CPU_6348
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_BIG_ENDIAN
-       select SYS_HAS_EARLY_PRINTK
diff --git a/target/linux/brcm63xx/patches-3.8/313-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch b/target/linux/brcm63xx/patches-3.8/313-MIPS-BCM63XX-rename-__dispatch_internal-to-__dispatc.patch
deleted file mode 100644 (file)
index f5b6071..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
-From bb2774da9598f3ea38099d3dcf753b585824a011 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 21 Mar 2013 17:05:15 +0100
-Subject: [PATCH 04/13] MIPS: BCM63XX: rename __dispatch_internal to
- __dispatch_internal_32
-
-Make it follow the same naming convention as the other functions.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |    8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,7 +19,7 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--static void __dispatch_internal(void) __maybe_unused;
-+static void __dispatch_internal_32(void) __maybe_unused;
- static void __dispatch_internal_64(void) __maybe_unused;
- static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
-@@ -106,7 +106,7 @@ static void __internal_irq_unmask_64(uns
- #endif
- #if irq_bits == 32
--#define dispatch_internal                     __dispatch_internal
-+#define dispatch_internal                     __dispatch_internal_32
- #define internal_irq_mask                     __internal_irq_mask_32
- #define internal_irq_unmask                   __internal_irq_unmask_32
- #else
-@@ -207,7 +207,7 @@ static void bcm63xx_init_irq(void)
-       }
-       if (irq_bits == 32) {
--              dispatch_internal = __dispatch_internal;
-+              dispatch_internal = __dispatch_internal_32;
-               internal_irq_mask = __internal_irq_mask_32;
-               internal_irq_unmask = __internal_irq_unmask_32;
-       } else {
-@@ -240,7 +240,7 @@ static inline void handle_internal(int i
-  * will resume the loop where it ended the last time we left this
-  * function.
-  */
--static void __dispatch_internal(void)
-+static void __dispatch_internal_32(void)
- {
-       u32 pending;
-       static int i;
diff --git a/target/linux/brcm63xx/patches-3.8/314-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch b/target/linux/brcm63xx/patches-3.8/314-MIPS-BCM63XX-replace-irq-dispatch-code-with-a-generi.patch
deleted file mode 100644 (file)
index 5fabd08..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-From 661e02b8e2b9a4b48a809bc82dfe8f7b20ca750f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 18 Apr 2013 21:14:49 +0200
-Subject: [PATCH 05/13] MIPS: BCM63XX: replace irq dispatch code with a
- generic version
-
-The generic version uses a variable length of u32 registers of u32/u64.
-This allows easier support for longer registers without having to rewrite
-verything.
-
-This "generic" version is not slower than the old version in the best case
-(= i == next set bit), and twice as fast in the worst case in 64 bits.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |  130 ++++++++++++++++++++---------------------------
- 1 file changed, 56 insertions(+), 74 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -240,47 +240,65 @@ static inline void handle_internal(int i
-  * will resume the loop where it ended the last time we left this
-  * function.
-  */
--static void __dispatch_internal_32(void)
--{
--      u32 pending;
--      static int i;
--
--      pending = bcm_readl(irq_stat_addr) & bcm_readl(irq_mask_addr);
--
--      if (!pending)
--              return ;
--
--      while (1) {
--              int to_call = i;
--              i = (i + 1) & 0x1f;
--              if (pending & (1 << to_call)) {
--                      handle_internal(to_call);
--                      break;
--              }
--      }
-+#define BUILD_IPIC_INTERNAL(width)                                    \
-+void __dispatch_internal_##width(void)                                        \
-+{                                                                     \
-+      u32 pending[width / 32];                                        \
-+      unsigned int src, tgt;                                          \
-+      bool irqs_pending = false;                                      \
-+      static int i;                                                   \
-+                                                                      \
-+      /* read registers in reverse order */                           \
-+      for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-+              u32 val;                                                \
-+                                                                      \
-+              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
-+              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
-+              pending[--tgt] = val;                                   \
-+                                                                      \
-+              if (val)                                                \
-+                      irqs_pending = true;                            \
-+      }                                                               \
-+                                                                      \
-+      if (!irqs_pending)                                              \
-+              return;                                                 \
-+                                                                      \
-+      while (1) {                                                     \
-+              int to_call = i;                                        \
-+                                                                      \
-+              i = (i + 1) & (width - 1);                              \
-+              if (pending[to_call / 32] & (1 << (to_call & 0x1f))) {  \
-+                      handle_internal(to_call);                       \
-+                      break;                                          \
-+              }                                                       \
-+      }                                                               \
-+}                                                                     \
-+                                                                      \
-+static void __internal_irq_mask_##width(unsigned int irq)             \
-+{                                                                     \
-+      u32 val;                                                        \
-+      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-+      unsigned bit = irq & 0x1f;                                      \
-+                                                                      \
-+      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val &= ~(1 << bit);                                             \
-+      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+}                                                                     \
-+                                                                      \
-+static void __internal_irq_unmask_##width(unsigned int irq)           \
-+{                                                                     \
-+      u32 val;                                                        \
-+      unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-+      unsigned bit = irq & 0x1f;                                      \
-+                                                                      \
-+      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val |= (1 << bit);                                              \
-+      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
- }
--static void __dispatch_internal_64(void)
--{
--      u64 pending;
--      static int i;
--
--      pending = bcm_readq(irq_stat_addr) & bcm_readq(irq_mask_addr);
--
--      if (!pending)
--              return ;
--
--      while (1) {
--              int to_call = i;
--
--              i = (i + 1) & 0x3f;
--              if (pending & (1ull << to_call)) {
--                      handle_internal(to_call);
--                      break;
--              }
--      }
--}
-+BUILD_IPIC_INTERNAL(32);
-+BUILD_IPIC_INTERNAL(64);
- asmlinkage void plat_irq_dispatch(void)
- {
-@@ -317,42 +335,6 @@ asmlinkage void plat_irq_dispatch(void)
-  * internal IRQs operations: only mask/unmask on PERF irq mask
-  * register.
-  */
--static void __internal_irq_mask_32(unsigned int irq)
--{
--      u32 mask;
--
--      mask = bcm_readl(irq_mask_addr);
--      mask &= ~(1 << irq);
--      bcm_writel(mask, irq_mask_addr);
--}
--
--static void __internal_irq_mask_64(unsigned int irq)
--{
--      u64 mask;
--
--      mask = bcm_readq(irq_mask_addr);
--      mask &= ~(1ull << irq);
--      bcm_writeq(mask, irq_mask_addr);
--}
--
--static void __internal_irq_unmask_32(unsigned int irq)
--{
--      u32 mask;
--
--      mask = bcm_readl(irq_mask_addr);
--      mask |= (1 << irq);
--      bcm_writel(mask, irq_mask_addr);
--}
--
--static void __internal_irq_unmask_64(unsigned int irq)
--{
--      u64 mask;
--
--      mask = bcm_readq(irq_mask_addr);
--      mask |= (1ull << irq);
--      bcm_writeq(mask, irq_mask_addr);
--}
--
- static void bcm63xx_internal_irq_mask(struct irq_data *d)
- {
-       internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
diff --git a/target/linux/brcm63xx/patches-3.8/315-MIPS-BCM63XX-append-cpu-number-to-irq_-stat-mask.patch b/target/linux/brcm63xx/patches-3.8/315-MIPS-BCM63XX-append-cpu-number-to-irq_-stat-mask.patch
deleted file mode 100644 (file)
index 98cd637..0000000
+++ /dev/null
@@ -1,258 +0,0 @@
-From 6ec70ebfccd31ae3668d99b5703e5c9ce38384b4 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 00:24:06 +0200
-Subject: [PATCH 06/13] MIPS: BCM63XX: append cpu number to irq_{stat,mask}*
-
-For SMP affinity support we need to discrimnate between the registers
-for both CPUs.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c                           |   78 ++++++++++-----------
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   16 ++---
- 2 files changed, 47 insertions(+), 47 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -28,8 +28,8 @@ static void __internal_irq_unmask_64(uns
- #ifndef BCMCPU_RUNTIME_DETECT
- #ifdef CONFIG_BCM63XX_CPU_6328
--#define irq_stat_reg          PERF_IRQSTAT_6328_REG
--#define irq_mask_reg          PERF_IRQMASK_6328_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6328_REG(0)
-+#define irq_mask_reg0         PERF_IRQMASK_6328_REG(0)
- #define irq_bits              64
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -39,8 +39,8 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg2      0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
--#define irq_stat_reg          PERF_IRQSTAT_6338_REG
--#define irq_mask_reg          PERF_IRQMASK_6338_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6338_REG
-+#define irq_mask_reg0         PERF_IRQMASK_6338_REG
- #define irq_bits              32
- #define is_ext_irq_cascaded   0
- #define ext_irq_start         0
-@@ -50,8 +50,8 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg2      0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
--#define irq_stat_reg          PERF_IRQSTAT_6345_REG
--#define irq_mask_reg          PERF_IRQMASK_6345_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6345_REG
-+#define irq_mask_reg0         PERF_IRQMASK_6345_REG
- #define irq_bits              32
- #define is_ext_irq_cascaded   0
- #define ext_irq_start         0
-@@ -61,8 +61,8 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg2      0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
--#define irq_stat_reg          PERF_IRQSTAT_6348_REG
--#define irq_mask_reg          PERF_IRQMASK_6348_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6348_REG
-+#define irq_mask_reg0         PERF_IRQMASK_6348_REG
- #define irq_bits              32
- #define is_ext_irq_cascaded   0
- #define ext_irq_start         0
-@@ -72,8 +72,8 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg2      0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
--#define irq_stat_reg          PERF_IRQSTAT_6358_REG
--#define irq_mask_reg          PERF_IRQMASK_6358_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6358_REG(0)
-+#define irq_mask_reg0         PERF_IRQMASK_6358_REG(0)
- #define irq_bits              32
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -83,8 +83,8 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg2      0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6362
--#define irq_stat_reg          PERF_IRQSTAT_6362_REG
--#define irq_mask_reg          PERF_IRQMASK_6362_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6362_REG(0)
-+#define irq_mask_reg0         PERF_IRQMASK_6362_REG(0)
- #define irq_bits              64
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -94,8 +94,8 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg2      0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
--#define irq_stat_reg          PERF_IRQSTAT_6368_REG
--#define irq_mask_reg          PERF_IRQMASK_6368_REG
-+#define irq_stat_reg0         PERF_IRQSTAT_6368_REG(0)
-+#define irq_mask_reg0         PERF_IRQMASK_6368_REG(0)
- #define irq_bits              64
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -115,15 +115,15 @@ static void __internal_irq_unmask_64(uns
- #define internal_irq_unmask                   __internal_irq_unmask_64
- #endif
--#define irq_stat_addr (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg)
--#define irq_mask_addr (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg)
-+#define irq_stat_addr0        (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg0)
-+#define irq_mask_addr0        (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg0)
- static inline void bcm63xx_init_irq(void)
- {
- }
- #else /* ! BCMCPU_RUNTIME_DETECT */
--static u32 irq_stat_addr, irq_mask_addr;
-+static u32 irq_stat_addr0, irq_mask_addr0;
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
-@@ -136,13 +136,13 @@ static void bcm63xx_init_irq(void)
- {
-       int irq_bits;
--      irq_stat_addr = bcm63xx_regset_address(RSET_PERF);
--      irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-+      irq_stat_addr0 = bcm63xx_regset_address(RSET_PERF);
-+      irq_mask_addr0 = bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6328_REG;
--              irq_mask_addr += PERF_IRQMASK_6328_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6328_REG(0);
-+              irq_mask_addr0 += PERF_IRQMASK_6328_REG(0);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -151,29 +151,29 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-               break;
-       case BCM6338_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6338_REG;
--              irq_mask_addr += PERF_IRQMASK_6338_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6338_REG;
-+              irq_mask_addr0 += PERF_IRQMASK_6338_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
-               break;
-       case BCM6345_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6345_REG;
--              irq_mask_addr += PERF_IRQMASK_6345_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6345_REG;
-+              irq_mask_addr0 += PERF_IRQMASK_6345_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
-               break;
-       case BCM6348_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6348_REG;
--              irq_mask_addr += PERF_IRQMASK_6348_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6348_REG;
-+              irq_mask_addr0 += PERF_IRQMASK_6348_REG;
-               irq_bits = 32;
-               ext_irq_count = 4;
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6348;
-               break;
-       case BCM6358_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6358_REG;
--              irq_mask_addr += PERF_IRQMASK_6358_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6358_REG(0);
-+              irq_mask_addr0 += PERF_IRQMASK_6358_REG(0);
-               irq_bits = 32;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -182,8 +182,8 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
-               break;
-       case BCM6362_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6362_REG;
--              irq_mask_addr += PERF_IRQMASK_6362_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6362_REG(0);
-+              irq_mask_addr0 += PERF_IRQMASK_6362_REG(0);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -192,8 +192,8 @@ static void bcm63xx_init_irq(void)
-               ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-               break;
-       case BCM6368_CPU_ID:
--              irq_stat_addr += PERF_IRQSTAT_6368_REG;
--              irq_mask_addr += PERF_IRQMASK_6368_REG;
-+              irq_stat_addr0 += PERF_IRQSTAT_6368_REG(0);
-+              irq_mask_addr0 += PERF_IRQMASK_6368_REG(0);
-               irq_bits = 64;
-               ext_irq_count = 6;
-               is_ext_irq_cascaded = 1;
-@@ -253,8 +253,8 @@ void __dispatch_internal_##width(void)
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-               u32 val;                                                \
-                                                                       \
--              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
--              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
-+              val = bcm_readl(irq_stat_addr0 + src * sizeof(u32));    \
-+              val &= bcm_readl(irq_mask_addr0 + src * sizeof(u32));   \
-               pending[--tgt] = val;                                   \
-                                                                       \
-               if (val)                                                \
-@@ -281,9 +281,9 @@ static void __internal_irq_mask_##width(
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-                                                                       \
--      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val = bcm_readl(irq_mask_addr0 + reg * sizeof(u32));            \
-       val &= ~(1 << bit);                                             \
--      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+      bcm_writel(val, irq_mask_addr0 + reg * sizeof(u32));            \
- }                                                                     \
-                                                                       \
- static void __internal_irq_unmask_##width(unsigned int irq)           \
-@@ -292,9 +292,9 @@ static void __internal_irq_unmask_##widt
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-                                                                       \
--      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-+      val = bcm_readl(irq_mask_addr0 + reg * sizeof(u32));            \
-       val |= (1 << bit);                                              \
--      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+      bcm_writel(val, irq_mask_addr0 + reg * sizeof(u32));            \
- }
- BUILD_IPIC_INTERNAL(32);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -181,22 +181,22 @@
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
--#define PERF_IRQMASK_6328_REG         0x20
-+#define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
- #define PERF_IRQMASK_6348_REG         0xc
--#define PERF_IRQMASK_6358_REG         0xc
--#define PERF_IRQMASK_6362_REG         0x20
--#define PERF_IRQMASK_6368_REG         0x20
-+#define PERF_IRQMASK_6358_REG(x)      (0xc + (x) * 0x2c)
-+#define PERF_IRQMASK_6362_REG(x)      (0x20 + (x) * 0x10)
-+#define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
- /* Interrupt Status register */
--#define PERF_IRQSTAT_6328_REG         0x28
-+#define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
- #define PERF_IRQSTAT_6348_REG         0x10
--#define PERF_IRQSTAT_6358_REG         0x10
--#define PERF_IRQSTAT_6362_REG         0x28
--#define PERF_IRQSTAT_6368_REG         0x28
-+#define PERF_IRQSTAT_6358_REG(x)      (0x10 + (x) * 0x2c)
-+#define PERF_IRQSTAT_6362_REG(x)      (0x28 + (x) * 0x10)
-+#define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
diff --git a/target/linux/brcm63xx/patches-3.8/316-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch b/target/linux/brcm63xx/patches-3.8/316-MIPS-BCM63XX-populate-irq_-stat-mask-_addr-for-secon.patch
deleted file mode 100644 (file)
index 094eaa8..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
-From b14de5c78d32f8f98535a99ea56bb924beb66810 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 00:31:29 +0200
-Subject: [PATCH 07/13] MIPS: BCM63XX: populate irq_{stat,mask}_addr for
- second CPU
-
-Populate it for all platforms with a BMIPS4350.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   28 +++++++++++++++++++++++++++-
- 1 file changed, 27 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -30,6 +30,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6328
- #define irq_stat_reg0         PERF_IRQSTAT_6328_REG(0)
- #define irq_mask_reg0         PERF_IRQMASK_6328_REG(0)
-+#define irq_stat_reg1         PERF_IRQSTAT_6328_REG(1)
-+#define irq_mask_reg1         PERF_IRQMASK_6328_REG(1)
- #define irq_bits              64
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -41,6 +43,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6338
- #define irq_stat_reg0         PERF_IRQSTAT_6338_REG
- #define irq_mask_reg0         PERF_IRQMASK_6338_REG
-+#define irq_stat_reg1         0
-+#define irq_mask_reg1         0
- #define irq_bits              32
- #define is_ext_irq_cascaded   0
- #define ext_irq_start         0
-@@ -52,6 +56,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6345
- #define irq_stat_reg0         PERF_IRQSTAT_6345_REG
- #define irq_mask_reg0         PERF_IRQMASK_6345_REG
-+#define irq_stat_reg1         0
-+#define irq_mask_reg1         0
- #define irq_bits              32
- #define is_ext_irq_cascaded   0
- #define ext_irq_start         0
-@@ -63,6 +69,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6348
- #define irq_stat_reg0         PERF_IRQSTAT_6348_REG
- #define irq_mask_reg0         PERF_IRQMASK_6348_REG
-+#define irq_stat_reg1         0
-+#define irq_mask_reg1         0
- #define irq_bits              32
- #define is_ext_irq_cascaded   0
- #define ext_irq_start         0
-@@ -74,6 +82,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6358
- #define irq_stat_reg0         PERF_IRQSTAT_6358_REG(0)
- #define irq_mask_reg0         PERF_IRQMASK_6358_REG(0)
-+#define irq_stat_reg1         PERF_IRQSTAT_6358_REG(1)
-+#define irq_mask_reg1         PERF_IRQMASK_6358_REG(1)
- #define irq_bits              32
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6358_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -85,6 +95,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6362
- #define irq_stat_reg0         PERF_IRQSTAT_6362_REG(0)
- #define irq_mask_reg0         PERF_IRQMASK_6362_REG(0)
-+#define irq_stat_reg1         PERF_IRQSTAT_6362_REG(1)
-+#define irq_mask_reg1         PERF_IRQMASK_6362_REG(1)
- #define irq_bits              64
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -96,6 +108,8 @@ static void __internal_irq_unmask_64(uns
- #ifdef CONFIG_BCM63XX_CPU_6368
- #define irq_stat_reg0         PERF_IRQSTAT_6368_REG(0)
- #define irq_mask_reg0         PERF_IRQMASK_6368_REG(0)
-+#define irq_stat_reg1         PERF_IRQSTAT_6368_REG(1)
-+#define irq_mask_reg1         PERF_IRQMASK_6368_REG(1)
- #define irq_bits              64
- #define is_ext_irq_cascaded   1
- #define ext_irq_start         (BCM_6368_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-@@ -117,13 +131,15 @@ static void __internal_irq_unmask_64(uns
- #define irq_stat_addr0        (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg0)
- #define irq_mask_addr0        (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg0)
-+#define irq_stat_addr1        (bcm63xx_regset_address(RSET_PERF) + irq_stat_reg1)
-+#define irq_mask_addr1        (bcm63xx_regset_address(RSET_PERF) + irq_mask_reg1)
- static inline void bcm63xx_init_irq(void)
- {
- }
- #else /* ! BCMCPU_RUNTIME_DETECT */
--static u32 irq_stat_addr0, irq_mask_addr0;
-+static u32 irq_stat_addr0, irq_mask_addr0, irq_stat_addr1, irq_mask_addr1;
- static void (*dispatch_internal)(void);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
-@@ -138,11 +154,15 @@ static void bcm63xx_init_irq(void)
-       irq_stat_addr0 = bcm63xx_regset_address(RSET_PERF);
-       irq_mask_addr0 = bcm63xx_regset_address(RSET_PERF);
-+      irq_stat_addr1 = bcm63xx_regset_address(RSET_PERF);
-+      irq_mask_addr1 = bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-               irq_stat_addr0 += PERF_IRQSTAT_6328_REG(0);
-               irq_mask_addr0 += PERF_IRQMASK_6328_REG(0);
-+              irq_stat_addr1 += PERF_IRQSTAT_6328_REG(1);
-+              irq_stat_addr1 += PERF_IRQMASK_6328_REG(1);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -174,6 +194,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6358_CPU_ID:
-               irq_stat_addr0 += PERF_IRQSTAT_6358_REG(0);
-               irq_mask_addr0 += PERF_IRQMASK_6358_REG(0);
-+              irq_stat_addr1 += PERF_IRQSTAT_6358_REG(1);
-+              irq_mask_addr1 += PERF_IRQMASK_6358_REG(1);
-               irq_bits = 32;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -184,6 +206,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6362_CPU_ID:
-               irq_stat_addr0 += PERF_IRQSTAT_6362_REG(0);
-               irq_mask_addr0 += PERF_IRQMASK_6362_REG(0);
-+              irq_stat_addr1 += PERF_IRQSTAT_6362_REG(1);
-+              irq_mask_addr1 += PERF_IRQMASK_6362_REG(1);
-               irq_bits = 64;
-               ext_irq_count = 4;
-               is_ext_irq_cascaded = 1;
-@@ -194,6 +218,8 @@ static void bcm63xx_init_irq(void)
-       case BCM6368_CPU_ID:
-               irq_stat_addr0 += PERF_IRQSTAT_6368_REG(0);
-               irq_mask_addr0 += PERF_IRQMASK_6368_REG(0);
-+              irq_stat_addr1 += PERF_IRQSTAT_6368_REG(1);
-+              irq_mask_addr1 += PERF_IRQMASK_6368_REG(1);
-               irq_bits = 64;
-               ext_irq_count = 6;
-               is_ext_irq_cascaded = 1;
diff --git a/target/linux/brcm63xx/patches-3.8/317-MIPS-BCM63XX-use-a-helper-for-getting-the-right-regi.patch b/target/linux/brcm63xx/patches-3.8/317-MIPS-BCM63XX-use-a-helper-for-getting-the-right-regi.patch
deleted file mode 100644 (file)
index 3931b21..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-From 7c9d3fe01034adbb890aab7c44534658f89c211b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Thu, 25 Apr 2013 15:35:12 +0200
-Subject: [PATCH 08/13] MIPS: BCM63XX: use a helper for getting the right
- register address
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   30 ++++++++++++++++++++++++------
- 1 file changed, 24 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -251,6 +251,20 @@ static inline u32 get_ext_irq_perf_reg(i
-       return ext_irq_cfg_reg2;
- }
-+static inline u32 get_irq_stat_addr(int cpu)
-+{
-+      if (cpu == 0)
-+              return irq_stat_addr0;
-+      return irq_stat_addr1;
-+}
-+
-+static inline u32 get_irq_mask_addr(int cpu)
-+{
-+      if (cpu == 0)
-+              return irq_mask_addr0;
-+      return irq_mask_addr1;
-+}
-+
- static inline void handle_internal(int intbit)
- {
-       if (is_ext_irq_cascaded &&
-@@ -274,13 +288,15 @@ void __dispatch_internal_##width(void)
-       unsigned int src, tgt;                                          \
-       bool irqs_pending = false;                                      \
-       static int i;                                                   \
-+      u32 irq_stat_addr = get_irq_stat_addr(0);                       \
-+      u32 irq_mask_addr = get_irq_mask_addr(0);                       \
-                                                                       \
-       /* read registers in reverse order */                           \
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-               u32 val;                                                \
-                                                                       \
--              val = bcm_readl(irq_stat_addr0 + src * sizeof(u32));    \
--              val &= bcm_readl(irq_mask_addr0 + src * sizeof(u32));   \
-+              val = bcm_readl(irq_stat_addr + src * sizeof(u32));     \
-+              val &= bcm_readl(irq_mask_addr + src * sizeof(u32));    \
-               pending[--tgt] = val;                                   \
-                                                                       \
-               if (val)                                                \
-@@ -306,10 +322,11 @@ static void __internal_irq_mask_##width(
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-+      u32 irq_mask_addr = get_irq_mask_addr(0);                       \
-                                                                       \
--      val = bcm_readl(irq_mask_addr0 + reg * sizeof(u32));            \
-+      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-       val &= ~(1 << bit);                                             \
--      bcm_writel(val, irq_mask_addr0 + reg * sizeof(u32));            \
-+      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
- }                                                                     \
-                                                                       \
- static void __internal_irq_unmask_##width(unsigned int irq)           \
-@@ -317,10 +334,11 @@ static void __internal_irq_unmask_##widt
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
-+      u32 irq_mask_addr = get_irq_mask_addr(0);                       \
-                                                                       \
--      val = bcm_readl(irq_mask_addr0 + reg * sizeof(u32));            \
-+      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
-       val |= (1 << bit);                                              \
--      bcm_writel(val, irq_mask_addr0 + reg * sizeof(u32));            \
-+      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
- }
- BUILD_IPIC_INTERNAL(32);
diff --git a/target/linux/brcm63xx/patches-3.8/318-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch b/target/linux/brcm63xx/patches-3.8/318-MIPS-BCM63XX-add-cpu-argument-to-dispatch-internal.patch
deleted file mode 100644 (file)
index 081ec18..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-From 398337c57ebe3c704e0df5f569e6bd860ffe8914 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 11:21:16 +0200
-Subject: [PATCH 09/13] MIPS: BCM63XX: add cpu argument to dispatch internal
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   14 +++++++-------
- 1 file changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -19,8 +19,8 @@
- #include <bcm63xx_io.h>
- #include <bcm63xx_irq.h>
--static void __dispatch_internal_32(void) __maybe_unused;
--static void __dispatch_internal_64(void) __maybe_unused;
-+static void __dispatch_internal_32(int cpu) __maybe_unused;
-+static void __dispatch_internal_64(int cpu) __maybe_unused;
- static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
- static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
-@@ -140,7 +140,7 @@ static inline void bcm63xx_init_irq(void
- #else /* ! BCMCPU_RUNTIME_DETECT */
- static u32 irq_stat_addr0, irq_mask_addr0, irq_stat_addr1, irq_mask_addr1;
--static void (*dispatch_internal)(void);
-+static void (*dispatch_internal)(int cpu);
- static int is_ext_irq_cascaded;
- static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
-@@ -282,14 +282,14 @@ static inline void handle_internal(int i
-  */
- #define BUILD_IPIC_INTERNAL(width)                                    \
--void __dispatch_internal_##width(void)                                        \
-+void __dispatch_internal_##width(int cpu)                             \
- {                                                                     \
-       u32 pending[width / 32];                                        \
-       unsigned int src, tgt;                                          \
-       bool irqs_pending = false;                                      \
-       static int i;                                                   \
--      u32 irq_stat_addr = get_irq_stat_addr(0);                       \
--      u32 irq_mask_addr = get_irq_mask_addr(0);                       \
-+      u32 irq_stat_addr = get_irq_stat_addr(cpu);                     \
-+      u32 irq_mask_addr = get_irq_mask_addr(cpu);                     \
-                                                                       \
-       /* read registers in reverse order */                           \
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-@@ -361,7 +361,7 @@ asmlinkage void plat_irq_dispatch(void)
-               if (cause & CAUSEF_IP1)
-                       do_IRQ(1);
-               if (cause & CAUSEF_IP2)
--                      dispatch_internal();
-+                      dispatch_internal(0);
-               if (!is_ext_irq_cascaded) {
-                       if (cause & CAUSEF_IP3)
-                               do_IRQ(IRQ_EXT_0);
diff --git a/target/linux/brcm63xx/patches-3.8/319-MIPS-BCM63XX-protect-irq-register-accesses-with-a-sp.patch b/target/linux/brcm63xx/patches-3.8/319-MIPS-BCM63XX-protect-irq-register-accesses-with-a-sp.patch
deleted file mode 100644 (file)
index 76e8c32..0000000
+++ /dev/null
@@ -1,174 +0,0 @@
-From 7b8e7bc9806b61be2f07bf2bbb5e3ee6e0f333e9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 21 Apr 2013 15:38:56 +0200
-Subject: [PATCH 10/13] MIPS: BCM63XX: protect irq register accesses with a
- spinlock
-
-Since IRQs can be handled on both CPUs, we need to ensure that we
-don't try to modify the IRQ registers at the same time.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   47 ++++++++++++++++++++++++++++++++++++++++++-----
- 1 file changed, 42 insertions(+), 5 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -12,6 +12,7 @@
- #include <linux/interrupt.h>
- #include <linux/module.h>
- #include <linux/irq.h>
-+#include <linux/spinlock.h>
- #include <asm/irq_cpu.h>
- #include <asm/mipsregs.h>
- #include <bcm63xx_cpu.h>
-@@ -26,6 +27,9 @@ static void __internal_irq_mask_64(unsig
- static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
-+static DEFINE_SPINLOCK(ipic_lock);
-+static DEFINE_SPINLOCK(epic_lock);
-+
- #ifndef BCMCPU_RUNTIME_DETECT
- #ifdef CONFIG_BCM63XX_CPU_6328
- #define irq_stat_reg0         PERF_IRQSTAT_6328_REG(0)
-@@ -290,7 +294,9 @@ void __dispatch_internal_##width(int cpu
-       static int i;                                                   \
-       u32 irq_stat_addr = get_irq_stat_addr(cpu);                     \
-       u32 irq_mask_addr = get_irq_mask_addr(cpu);                     \
-+      unsigned long flags;                                            \
-                                                                       \
-+      spin_lock_irqsave(&ipic_lock, flags);                           \
-       /* read registers in reverse order */                           \
-       for (src = 0, tgt = (width / 32); src < (width / 32); src++) {  \
-               u32 val;                                                \
-@@ -302,6 +308,7 @@ void __dispatch_internal_##width(int cpu
-               if (val)                                                \
-                       irqs_pending = true;                            \
-       }                                                               \
-+      spin_unlock_irqrestore(&ipic_lock, flags);                      \
-                                                                       \
-       if (!irqs_pending)                                              \
-               return;                                                 \
-@@ -381,12 +388,20 @@ asmlinkage void plat_irq_dispatch(void)
-  */
- static void bcm63xx_internal_irq_mask(struct irq_data *d)
- {
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&ipic_lock, flags);
-       internal_irq_mask(d->irq - IRQ_INTERNAL_BASE);
-+      spin_unlock_irqrestore(&ipic_lock, flags);
- }
- static void bcm63xx_internal_irq_unmask(struct irq_data *d)
- {
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&ipic_lock, flags);
-       internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
-+      spin_unlock_irqrestore(&ipic_lock, flags);
- }
- /*
-@@ -397,8 +412,11 @@ static void bcm63xx_external_irq_mask(st
- {
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-+      unsigned long flags;
-       regaddr = get_ext_irq_perf_reg(irq);
-+
-+      spin_lock_irqsave(&epic_lock, flags);
-       reg = bcm_perf_readl(regaddr);
-       if (BCMCPU_IS_6348())
-@@ -407,16 +425,24 @@ static void bcm63xx_external_irq_mask(st
-               reg &= ~EXTIRQ_CFG_MASK(irq % 4);
-       bcm_perf_writel(reg, regaddr);
--      if (is_ext_irq_cascaded)
--              internal_irq_mask(irq + ext_irq_start);
-+      spin_unlock_irqrestore(&epic_lock, flags);
-+
-+      if (is_ext_irq_cascaded) {
-+              struct irq_data *cd = irq_get_irq_data(irq + ext_irq_start);
-+
-+              bcm63xx_internal_irq_mask(cd);
-+      }
- }
- static void bcm63xx_external_irq_unmask(struct irq_data *d)
- {
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-+      unsigned long flags;
-       regaddr = get_ext_irq_perf_reg(irq);
-+
-+      spin_lock_irqsave(&epic_lock, flags);
-       reg = bcm_perf_readl(regaddr);
-       if (BCMCPU_IS_6348())
-@@ -425,16 +451,22 @@ static void bcm63xx_external_irq_unmask(
-               reg |= EXTIRQ_CFG_MASK(irq % 4);
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
-+
-+      if (is_ext_irq_cascaded) {
-+              struct irq_data *cd = irq_get_irq_data(irq + ext_irq_start);
--      if (is_ext_irq_cascaded)
--              internal_irq_unmask(irq + ext_irq_start);
-+              bcm63xx_internal_irq_unmask(cd);
-+      }
- }
- static void bcm63xx_external_irq_clear(struct irq_data *d)
- {
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-+      unsigned long flags;
-+      spin_lock_irqsave(&epic_lock, flags);
-       regaddr = get_ext_irq_perf_reg(irq);
-       reg = bcm_perf_readl(regaddr);
-@@ -444,6 +476,7 @@ static void bcm63xx_external_irq_clear(s
-               reg |= EXTIRQ_CFG_CLEAR(irq % 4);
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
- }
- static int bcm63xx_external_irq_set_type(struct irq_data *d,
-@@ -452,6 +485,7 @@ static int bcm63xx_external_irq_set_type
-       unsigned int irq = d->irq - IRQ_EXTERNAL_BASE;
-       u32 reg, regaddr;
-       int levelsense, sense, bothedge;
-+      unsigned long flags;
-       flow_type &= IRQ_TYPE_SENSE_MASK;
-@@ -486,9 +520,11 @@ static int bcm63xx_external_irq_set_type
-       }
-       regaddr = get_ext_irq_perf_reg(irq);
--      reg = bcm_perf_readl(regaddr);
-       irq %= 4;
-+      spin_lock_irqsave(&epic_lock, flags);
-+      reg = bcm_perf_readl(regaddr);
-+
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6348_CPU_ID:
-               if (levelsense)
-@@ -529,6 +565,7 @@ static int bcm63xx_external_irq_set_type
-       }
-       bcm_perf_writel(reg, regaddr);
-+      spin_unlock_irqrestore(&epic_lock, flags);
-       irqd_set_trigger_type(d, flow_type);
-       if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
diff --git a/target/linux/brcm63xx/patches-3.8/320-MIPS-BCM63XX-wire-up-the-second-CPU-s-irq-line.patch b/target/linux/brcm63xx/patches-3.8/320-MIPS-BCM63XX-wire-up-the-second-CPU-s-irq-line.patch
deleted file mode 100644 (file)
index 2acbf30..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From 1baec3216529f795905b6376f9c8e4f14b114ba2 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 12:03:15 +0200
-Subject: [PATCH 11/13] MIPS: BCM63XX: wire up the second CPU's irq line
-
-It's hardwired to IRQ3, so we don't need to actually check the CPU id.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   40 ++++++++++++++++++++++++++++++++--------
- 1 file changed, 32 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -329,11 +329,15 @@ static void __internal_irq_mask_##width(
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
--      u32 irq_mask_addr = get_irq_mask_addr(0);                       \
-+      int cpu;                                                        \
-                                                                       \
--      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
--      val &= ~(1 << bit);                                             \
--      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+      for_each_online_cpu(cpu) {                                      \
-+              u32 irq_mask_addr = get_irq_mask_addr(cpu);             \
-+                                                                      \
-+              val = bcm_readl(irq_mask_addr + reg * sizeof(u32));     \
-+              val &= ~(1 << bit);                                     \
-+              bcm_writel(val, irq_mask_addr + reg * sizeof(u32));     \
-+      }                                                               \
- }                                                                     \
-                                                                       \
- static void __internal_irq_unmask_##width(unsigned int irq)           \
-@@ -341,11 +345,15 @@ static void __internal_irq_unmask_##widt
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-       unsigned bit = irq & 0x1f;                                      \
--      u32 irq_mask_addr = get_irq_mask_addr(0);                       \
-+      int cpu;                                                        \
-+                                                                      \
-+      for_each_online_cpu(cpu) {                                      \
-+              u32 irq_mask_addr = get_irq_mask_addr(cpu);             \
-                                                                       \
--      val = bcm_readl(irq_mask_addr + reg * sizeof(u32));             \
--      val |= (1 << bit);                                              \
--      bcm_writel(val, irq_mask_addr + reg * sizeof(u32));             \
-+              val = bcm_readl(irq_mask_addr + reg * sizeof(u32));     \
-+              val |= (1 << bit);                                      \
-+              bcm_writel(val, irq_mask_addr + reg * sizeof(u32));     \
-+      }                                                               \
- }
- BUILD_IPIC_INTERNAL(32);
-@@ -369,6 +377,10 @@ asmlinkage void plat_irq_dispatch(void)
-                       do_IRQ(1);
-               if (cause & CAUSEF_IP2)
-                       dispatch_internal(0);
-+#ifdef CONFIG_SMP
-+              if (cause & CAUSEF_IP3)
-+                      dispatch_internal(1);
-+#else
-               if (!is_ext_irq_cascaded) {
-                       if (cause & CAUSEF_IP3)
-                               do_IRQ(IRQ_EXT_0);
-@@ -379,6 +391,7 @@ asmlinkage void plat_irq_dispatch(void)
-                       if (cause & CAUSEF_IP6)
-                               do_IRQ(IRQ_EXT_3);
-               }
-+#endif
-       } while (1);
- }
-@@ -598,6 +611,14 @@ static struct irqaction cpu_ip2_cascade_
-       .flags          = IRQF_NO_THREAD,
- };
-+#ifdef CONFIG_SMP
-+static struct irqaction cpu_ip3_cascade_action = {
-+      .handler        = no_action,
-+      .name           = "cascade_ip3",
-+      .flags          = IRQF_NO_THREAD,
-+};
-+#endif
-+
- static struct irqaction cpu_ext_cascade_action = {
-       .handler        = no_action,
-       .name           = "cascade_extirq",
-@@ -624,4 +645,7 @@ void __init arch_init_irq(void)
-       }
-       setup_irq(MIPS_CPU_IRQ_BASE + 2, &cpu_ip2_cascade_action);
-+#ifdef CONFIG_SMP
-+      setup_irq(MIPS_CPU_IRQ_BASE + 3, &cpu_ip3_cascade_action);
-+#endif
- }
diff --git a/target/linux/brcm63xx/patches-3.8/321-MIPS-BCM63XX-add-cpumask-argument-to-unmask.patch b/target/linux/brcm63xx/patches-3.8/321-MIPS-BCM63XX-add-cpumask-argument-to-unmask.patch
deleted file mode 100644 (file)
index 1047de3..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
-From 8679976d2ec08db4e4a14ecdd1ee022b70e51fc6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Tue, 30 Apr 2013 11:26:53 +0200
-Subject: [PATCH 12/13] MIPS: BCM63XX: add cpumask argument to unmask
-
-Allow selective unmasking of IPIC irqs.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   19 +++++++++++++------
- 1 file changed, 13 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -24,8 +24,10 @@ static void __dispatch_internal_32(int c
- static void __dispatch_internal_64(int cpu) __maybe_unused;
- static void __internal_irq_mask_32(unsigned int irq) __maybe_unused;
- static void __internal_irq_mask_64(unsigned int irq) __maybe_unused;
--static void __internal_irq_unmask_32(unsigned int irq) __maybe_unused;
--static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
-+static void __internal_irq_unmask_32(unsigned int irq,
-+                                   const struct cpumask *dest) __maybe_unused;
-+static void __internal_irq_unmask_64(unsigned int irq,
-+                                   const struct cpumask *dest) __maybe_unused;
- static DEFINE_SPINLOCK(ipic_lock);
- static DEFINE_SPINLOCK(epic_lock);
-@@ -150,7 +152,8 @@ static unsigned int ext_irq_count;
- static unsigned int ext_irq_start, ext_irq_end;
- static unsigned int ext_irq_cfg_reg1, ext_irq_cfg_reg2;
- static void (*internal_irq_mask)(unsigned int irq);
--static void (*internal_irq_unmask)(unsigned int irq);
-+static void (*internal_irq_unmask)(unsigned int irq,
-+                                 const struct cpumask *dest);
- static void bcm63xx_init_irq(void)
- {
-@@ -340,7 +343,8 @@ static void __internal_irq_mask_##width(
-       }                                                               \
- }                                                                     \
-                                                                       \
--static void __internal_irq_unmask_##width(unsigned int irq)           \
-+static void __internal_irq_unmask_##width(unsigned int irq,           \
-+                                      const struct cpumask *dest)     \
- {                                                                     \
-       u32 val;                                                        \
-       unsigned reg = (irq / 32) ^ (width/32 - 1);                     \
-@@ -351,7 +355,10 @@ static void __internal_irq_unmask_##widt
-               u32 irq_mask_addr = get_irq_mask_addr(cpu);             \
-                                                                       \
-               val = bcm_readl(irq_mask_addr + reg * sizeof(u32));     \
--              val |= (1 << bit);                                      \
-+              if (cpu_isset(cpu, *dest))                              \
-+                      val |= (1 << bit);                              \
-+              else                                                    \
-+                      val &= ~(1 << bit);                             \
-               bcm_writel(val, irq_mask_addr + reg * sizeof(u32));     \
-       }                                                               \
- }
-@@ -413,7 +420,7 @@ static void bcm63xx_internal_irq_unmask(
-       unsigned long flags;
-       spin_lock_irqsave(&ipic_lock, flags);
--      internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE);
-+      internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE, cpu_online_mask);
-       spin_unlock_irqrestore(&ipic_lock, flags);
- }
diff --git a/target/linux/brcm63xx/patches-3.8/322-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch b/target/linux/brcm63xx/patches-3.8/322-MIPS-BCM63XX-allow-setting-affinity-for-IPIC.patch
deleted file mode 100644 (file)
index d976903..0000000
+++ /dev/null
@@ -1,61 +0,0 @@
-From a8bb19e5ba9a3a73fe6a761295b67b641a7bc9df Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Fri, 26 Apr 2013 12:06:03 +0200
-Subject: [PATCH 13/13] MIPS: BCM63XX: allow setting affinity for IPIC
-
-Add support for setting the SMP affinity for the IPIC IRQs.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/irq.c |   27 ++++++++++++++++++++++++++-
- 1 file changed, 26 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -418,9 +418,14 @@ static void bcm63xx_internal_irq_mask(st
- static void bcm63xx_internal_irq_unmask(struct irq_data *d)
- {
-       unsigned long flags;
-+      const struct cpumask *dest = cpu_online_mask;
-       spin_lock_irqsave(&ipic_lock, flags);
--      internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE, cpu_online_mask);
-+#ifdef CONFIG_SMP
-+      if (irqd_affinity_was_set(d))
-+              dest = d->affinity;
-+#endif
-+      internal_irq_unmask(d->irq - IRQ_INTERNAL_BASE, dest);
-       spin_unlock_irqrestore(&ipic_lock, flags);
- }
-@@ -596,10 +601,30 @@ static int bcm63xx_external_irq_set_type
-       return IRQ_SET_MASK_OK_NOCOPY;
- }
-+#ifdef CONFIG_SMP
-+static int bcm63xx_internal_set_affinity(struct irq_data *data,
-+                                       const struct cpumask *dest,
-+                                       bool force)
-+{
-+      unsigned int irq = data->irq - IRQ_INTERNAL_BASE;
-+      unsigned long flags;
-+
-+      spin_lock_irqsave(&ipic_lock, flags);
-+      if (!irqd_irq_disabled(data))
-+              internal_irq_unmask(irq, dest);
-+      spin_unlock_irqrestore(&ipic_lock, flags);
-+
-+      return 0;
-+}
-+#endif
-+
- static struct irq_chip bcm63xx_internal_irq_chip = {
-       .name           = "bcm63xx_ipic",
-       .irq_mask       = bcm63xx_internal_irq_mask,
-       .irq_unmask     = bcm63xx_internal_irq_unmask,
-+#ifdef CONFIG_SMP
-+      .irq_set_affinity = bcm63xx_internal_set_affinity,
-+#endif
- };
- static struct irq_chip bcm63xx_external_irq_chip = {
diff --git a/target/linux/brcm63xx/patches-3.8/323-cfe_simplify_detection.patch b/target/linux/brcm63xx/patches-3.8/323-cfe_simplify_detection.patch
deleted file mode 100644 (file)
index e05c91d..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h
-@@ -1,6 +1,8 @@
- #ifndef BCM63XX_BOARD_H_
- #define BCM63XX_BOARD_H_
-+#include <asm/bootinfo.h>
-+
- const char *board_get_name(void);
- void board_prom_init(void);
-@@ -9,4 +11,8 @@ void board_setup(void);
- int board_register_devices(void);
-+static inline bool bcm63xx_is_cfe_present(void) {
-+      return fw_arg3 == 0x43464531;
-+}
-+
- #endif /* ! BCM63XX_BOARD_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/324-bcm63xxpart_use_cfedetection.patch b/target/linux/brcm63xx/patches-3.8/324-bcm63xxpart_use_cfedetection.patch
deleted file mode 100644 (file)
index fd7d08a..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -35,7 +35,7 @@
- #include <linux/bcm963xx_tag.h>
- #include <asm/mach-bcm63xx/bcm63xx_nvram.h>
--#include <asm/mach-bcm63xx/board_bcm963xx.h>
-+#include <asm/mach-bcm63xx/bcm63xx_board.h>
- #define BCM63XX_EXTENDED_SIZE 0xBFC00000      /* Extended flash address */
-@@ -43,30 +43,6 @@
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
--static int bcm63xx_detect_cfe(struct mtd_info *master)
--{
--      char buf[9];
--      int ret;
--      size_t retlen;
--
--      ret = mtd_read(master, BCM963XX_CFE_VERSION_OFFSET, 5, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      if (ret)
--              return ret;
--
--      if (strncmp("cfe-v", buf, 5) == 0)
--              return 0;
--
--      /* very old CFE's do not have the cfe-v string, so check for magic */
--      ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
--                     (void *)buf);
--      buf[retlen] = 0;
--
--      return strncmp("CFE1CFE1", buf, 8);
--}
--
- static int bcm63xx_parse_cfe_partitions(struct mtd_info *master,
-                                       struct mtd_partition **pparts,
-                                       struct mtd_part_parser_data *data)
-@@ -85,7 +61,7 @@ static int bcm63xx_parse_cfe_partitions(
-       u32 computed_crc;
-       bool rootfs_first = false;
--      if (bcm63xx_detect_cfe(master))
-+      if (!bcm63xx_is_cfe_present())
-               return -EINVAL;
-       cfe_erasesize = max_t(uint32_t, master->erasesize,
diff --git a/target/linux/brcm63xx/patches-3.8/400-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.8/400-bcm963xx_flashmap.patch
deleted file mode 100644 (file)
index 1aadfff..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c         |   32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c                     |   13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -30,7 +30,7 @@ static struct mtd_partition mtd_partitio
-       }
- };
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
-       int nulllen = 0;
-       int numslots;
-       unsigned long offset;
-+      unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
-       static char nullstring[] = "unallocated";
- #endif
-@@ -176,6 +177,16 @@ static int parse_redboot_partitions(stru
-               goto out;
-       }
-+      if (data && data->origin) {
-+              fis_origin = data->origin;
-+      } else {
-+              for (i = 0; i < numslots; i++) {
-+                      if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+                              fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+                      }
-+              }
-+      }
-+
-       for (i = 0; i < numslots; i++) {
-               struct fis_list *new_fl, **prev;
-@@ -196,10 +207,10 @@ static int parse_redboot_partitions(stru
-                       goto out;
-               }
-               new_fl->img = &buf[i];
--              if (data && data->origin)
--                      buf[i].flash_base -= data->origin;
--              else
--                      buf[i].flash_base &= master->size-1;
-+              if (fis_origin)
-+                      buf[i].flash_base -= fis_origin;
-+
-+              buf[i].flash_base &= (master->size << 1) - 1;
-               /* I'm sure the JFFS2 code has done me permanent damage.
-                * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.8/401-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.8/401-bcm963xx_real_rootfs_length.patch
deleted file mode 100644 (file)
index caf8b95..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/uapi/linux/bcm963xx_tag.h
-+++ b/include/uapi/linux/bcm963xx_tag.h
-@@ -85,8 +85,10 @@ struct bcm_tag {
-       __u32 rootfs_crc;
-       /* 224-227: CRC32 of kernel partition */
-       __u32 kernel_crc;
--      /* 228-235: Unused at present */
--      char reserved1[8];
-+      /* 228-231: Image sequence number */
-+      char image_sequence[4];
-+      /* 222-235: Openwrt: real rootfs length */
-+      __u32 real_rootfs_length;
-       /* 236-239: CRC32 of header excluding last 20 bytes */
-       __u32 header_crc;
-       /* 240-255: Unused at present */
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -110,7 +110,8 @@ static int bcm63xx_parse_cfe_partitions(
-               } else {
-                       /* OpenWrt layout */
-                       rootfsaddr = kerneladdr + kernellen;
--                      rootfslen = spareaddr - rootfsaddr;
-+                      rootfslen = buf->real_rootfs_length;
-+                      spareaddr = rootfsaddr + rootfslen;
-               }
-       } else {
-               pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
diff --git a/target/linux/brcm63xx/patches-3.8/402_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.8/402_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644 (file)
index 7d9f4a9..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1515,7 +1515,7 @@ static int compute_hw_mtu(struct bcm_ene
-       actual_mtu = mtu;
-       /* add ethernet header + vlan tag size */
--      actual_mtu += VLAN_ETH_HLEN;
-+      actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-       if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
-               return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.8/403-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.8/403-6358-enet1-external-mii-clk.patch
deleted file mode 100644 (file)
index 4ead53f..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -859,6 +859,8 @@ void __init board_prom_init(void)
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G3_EXT_MII |
-                               GPIO_MODE_6348_G0_EXT_MII;
-+              else if (BCMCPU_IS_6358())
-+                      val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
-       }
-       bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -578,6 +578,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS   (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED     (1 << 10)
- #define GPIO_MODE_6358_UTOPIA         (1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
- #define GPIO_MODE_6368_ANALOG_AFE_0   (1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1   (1 << 1)
diff --git a/target/linux/brcm63xx/patches-3.8/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.8/404-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644 (file)
index af5b701..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
-From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |   84 +++++++++++++-------------
- 1 files changed, 41 insertions(+), 43 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -784,10 +784,8 @@ static int bcm_enet_open(struct net_devi
-       struct bcm_enet_priv *priv;
-       struct sockaddr addr;
-       struct device *kdev;
--      struct phy_device *phydev;
-       int i, ret;
-       unsigned int size;
--      char phy_id[MII_BUS_ID_SIZE + 3];
-       void *p;
-       u32 val;
-@@ -795,40 +793,10 @@ static int bcm_enet_open(struct net_devi
-       kdev = &priv->pdev->dev;
-       if (priv->has_phy) {
--              /* connect to PHY */
--              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
--                       priv->mii_bus->id, priv->phy_id);
--
--              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
--                                   PHY_INTERFACE_MODE_MII);
--
--              if (IS_ERR(phydev)) {
--                      dev_err(kdev, "could not attach to PHY\n");
--                      return PTR_ERR(phydev);
--              }
--
--              /* mask with MAC supported features */
--              phydev->supported &= (SUPPORTED_10baseT_Half |
--                                    SUPPORTED_10baseT_Full |
--                                    SUPPORTED_100baseT_Half |
--                                    SUPPORTED_100baseT_Full |
--                                    SUPPORTED_Autoneg |
--                                    SUPPORTED_Pause |
--                                    SUPPORTED_MII);
--              phydev->advertising = phydev->supported;
--
--              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
--                      phydev->advertising |= SUPPORTED_Pause;
--              else
--                      phydev->advertising &= ~SUPPORTED_Pause;
--
--              dev_info(kdev, "attached PHY at address %d [%s]\n",
--                       phydev->addr, phydev->drv->name);
--
-+              /* Reset state */
-               priv->old_link = 0;
-               priv->old_duplex = -1;
-               priv->old_pause = -1;
--              priv->phydev = phydev;
-       }
-       /* mask all interrupts and request them */
-@@ -838,7 +806,7 @@ static int bcm_enet_open(struct net_devi
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
--              goto out_phy_disconnect;
-+              return ret;
-       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, IRQF_DISABLED,
-                         dev->name, dev);
-@@ -1025,9 +993,6 @@ out_freeirq_rx:
- out_freeirq:
-       free_irq(dev->irq, dev);
--out_phy_disconnect:
--      phy_disconnect(priv->phydev);
--
-       return ret;
- }
-@@ -1132,12 +1097,6 @@ static int bcm_enet_stop(struct net_devi
-       free_irq(priv->irq_rx, dev);
-       free_irq(dev->irq, dev);
--      /* release phy */
--      if (priv->has_phy) {
--              phy_disconnect(priv->phydev);
--              priv->phydev = NULL;
--      }
--
-       return 0;
- }
-@@ -1708,6 +1667,8 @@ static int bcm_enet_probe(struct platfor
-       /* MII bus registration */
-       if (priv->has_phy) {
-+              struct phy_device *phydev;
-+              char phy_id[MII_BUS_ID_SIZE + 3];
-               priv->mii_bus = mdiobus_alloc();
-               if (!priv->mii_bus) {
-@@ -1745,6 +1706,38 @@ static int bcm_enet_probe(struct platfor
-                       dev_err(&pdev->dev, "unable to register mdio bus\n");
-                       goto out_free_mdio;
-               }
-+
-+              /* connect to PHY */
-+              snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+                       priv->mii_bus->id, priv->phy_id);
-+
-+              phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
-+                                   PHY_INTERFACE_MODE_MII);
-+
-+              if (IS_ERR(phydev)) {
-+                      dev_err(&pdev->dev, "could not attach to PHY\n");
-+                      goto out_unregister_mdio;
-+              }
-+
-+              /* mask with MAC supported features */
-+              phydev->supported &= (SUPPORTED_10baseT_Half |
-+                                    SUPPORTED_10baseT_Full |
-+                                    SUPPORTED_100baseT_Half |
-+                                    SUPPORTED_100baseT_Full |
-+                                    SUPPORTED_Autoneg |
-+                                    SUPPORTED_Pause |
-+                                    SUPPORTED_MII);
-+              phydev->advertising = phydev->supported;
-+
-+              if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+                      phydev->advertising |= SUPPORTED_Pause;
-+              else
-+                      phydev->advertising &= ~SUPPORTED_Pause;
-+
-+              dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
-+                       phydev->addr, phydev->drv->name);
-+
-+              priv->phydev = phydev;
-       } else {
-               /* run platform code to initialize PHY device */
-@@ -1790,6 +1783,9 @@ static int bcm_enet_probe(struct platfor
-       return 0;
- out_unregister_mdio:
-+      if (priv->phydev)
-+              phy_disconnect(priv->phydev);
-+
-       if (priv->mii_bus)
-               mdiobus_unregister(priv->mii_bus);
-@@ -1831,6 +1827,8 @@ static int bcm_enet_remove(struct platfo
-       enet_writel(priv, 0, ENET_MIISC_REG);
-       if (priv->has_phy) {
-+              phy_disconnect(priv->phydev);
-+              priv->phydev = NULL;
-               mdiobus_unregister(priv->mii_bus);
-               mdiobus_free(priv->mii_bus);
-       } else {
diff --git a/target/linux/brcm63xx/patches-3.8/405-bcm63xx_enet-implement-reset_autoneg-ethtool.patch b/target/linux/brcm63xx/patches-3.8/405-bcm63xx_enet-implement-reset_autoneg-ethtool.patch
deleted file mode 100644 (file)
index d143b47..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-From accc558f334662c8b16c121b4819931c028e8eb0 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Mon, 8 Jun 2009 16:12:10 +0200
-Subject: [PATCH 27/63] bcm63xx_enet: implement reset_autoneg ethtool.
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c |   15 +++++++++++++++
- 1 files changed, 15 insertions(+), 0 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1290,6 +1290,20 @@ static void bcm_enet_get_ethtool_stats(s
-       mutex_unlock(&priv->mib_update_lock);
- }
-+static int bcm_enet_nway_reset(struct net_device *dev)
-+{
-+      struct bcm_enet_priv *priv;
-+
-+      priv = netdev_priv(dev);
-+      if (priv->has_phy) {
-+              if (!priv->phydev)
-+                      return -ENODEV;
-+              return genphy_restart_aneg(priv->phydev);
-+      }
-+
-+      return -EOPNOTSUPP;
-+}
-+
- static int bcm_enet_get_settings(struct net_device *dev,
-                                struct ethtool_cmd *cmd)
- {
-@@ -1432,6 +1446,7 @@ static const struct ethtool_ops bcm_enet
-       .get_strings            = bcm_enet_get_strings,
-       .get_sset_count         = bcm_enet_get_sset_count,
-       .get_ethtool_stats      = bcm_enet_get_ethtool_stats,
-+      .nway_reset             = bcm_enet_nway_reset,
-       .get_settings           = bcm_enet_get_settings,
-       .set_settings           = bcm_enet_set_settings,
-       .get_drvinfo            = bcm_enet_get_drvinfo,
diff --git a/target/linux/brcm63xx/patches-3.8/406-bcm63xx_enet-split-dma-registers-access.patch b/target/linux/brcm63xx/patches-3.8/406-bcm63xx_enet-split-dma-registers-access.patch
deleted file mode 100644 (file)
index d9bcef9..0000000
+++ /dev/null
@@ -1,337 +0,0 @@
-From 2e5b0197443fcb454ca88619e36bb33d7a79e3ea Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Thu, 21 Jan 2010 17:50:54 +0100
-Subject: [PATCH] bcm63xx_enet: split dma registers access.
-
----
- arch/mips/bcm63xx/dev-enet.c                     |   23 +++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h |    4 +-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c     |  144 +++++++++++++---------
- 3 files changed, 111 insertions(+), 62 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -19,6 +19,16 @@ static struct resource shared_res[] = {
-               .end            = -1, /* filled at runtime */
-               .flags          = IORESOURCE_MEM,
-       },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
- };
- static struct platform_device bcm63xx_enet_shared_device = {
-@@ -110,10 +120,15 @@ int __init bcm63xx_enet_register(int uni
-       if (!shared_device_registered) {
-               shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
-               shared_res[0].end = shared_res[0].start;
--              if (BCMCPU_IS_6338())
--                      shared_res[0].end += (RSET_ENETDMA_SIZE / 2)  - 1;
--              else
--                      shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
-+              shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
-+
-+              shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);
-+              shared_res[1].end = shared_res[1].start;
-+              shared_res[1].end += RSET_ENETDMAC_SIZE(16)  - 1;
-+
-+              shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);
-+              shared_res[2].end = shared_res[2].start;
-+              shared_res[2].end += RSET_ENETDMAS_SIZE(16)  - 1;
-               ret = platform_device_register(&bcm63xx_enet_shared_device);
-               if (ret)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -174,7 +174,9 @@ enum bcm63xx_regs_set {
- #define BCM_6358_RSET_SPI_SIZE                1804
- #define BCM_6368_RSET_SPI_SIZE                1804
- #define RSET_ENET_SIZE                        2048
--#define RSET_ENETDMA_SIZE             2048
-+#define RSET_ENETDMA_SIZE             256
-+#define RSET_ENETDMAC_SIZE(chans)     (16 * (chans))
-+#define RSET_ENETDMAS_SIZE(chans)     (16 * (chans))
- #define RSET_ENETSW_SIZE              65536
- #define RSET_UART_SIZE                        24
- #define RSET_HSSPI_SIZE                       1536
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -41,8 +41,8 @@ static int copybreak __read_mostly = 128
- module_param(copybreak, int, 0);
- MODULE_PARM_DESC(copybreak, "Receive copy threshold");
--/* io memory shared between all devices */
--static void __iomem *bcm_enet_shared_base;
-+/* io registers memory shared between all devices */
-+static void __iomem *bcm_enet_shared_base[3];
- /*
-  * io helpers to access mac registers
-@@ -63,13 +63,35 @@ static inline void enet_writel(struct bc
-  */
- static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
- {
--      return bcm_readl(bcm_enet_shared_base + off);
-+      return bcm_readl(bcm_enet_shared_base[0] + off);
- }
- static inline void enet_dma_writel(struct bcm_enet_priv *priv,
-                                      u32 val, u32 off)
- {
--      bcm_writel(val, bcm_enet_shared_base + off);
-+      bcm_writel(val, bcm_enet_shared_base[0] + off);
-+}
-+
-+static inline u32 enet_dmac_readl(struct bcm_enet_priv *priv, u32 off)
-+{
-+      return bcm_readl(bcm_enet_shared_base[1] + off);
-+}
-+
-+static inline void enet_dmac_writel(struct bcm_enet_priv *priv,
-+                                     u32 val, u32 off)
-+{
-+      bcm_writel(val, bcm_enet_shared_base[1] + off);
-+}
-+
-+static inline u32 enet_dmas_readl(struct bcm_enet_priv *priv, u32 off)
-+{
-+      return bcm_readl(bcm_enet_shared_base[2] + off);
-+}
-+
-+static inline void enet_dmas_writel(struct bcm_enet_priv *priv,
-+                                     u32 val, u32 off)
-+{
-+      bcm_writel(val, bcm_enet_shared_base[2] + off);
- }
- /*
-@@ -353,8 +375,8 @@ static int bcm_enet_receive_queue(struct
-               bcm_enet_refill_rx(dev);
-               /* kick rx dma */
--              enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
--                              ENETDMA_CHANCFG_REG(priv->rx_chan));
-+              enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+                               ENETDMAC_CHANCFG_REG(priv->rx_chan));
-       }
-       return processed;
-@@ -429,10 +451,10 @@ static int bcm_enet_poll(struct napi_str
-       dev = priv->net_dev;
-       /* ack interrupts */
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IR_REG(priv->rx_chan));
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IR_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IR_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IR_REG(priv->tx_chan));
-       /* reclaim sent skb */
-       tx_work_done = bcm_enet_tx_reclaim(dev, 0);
-@@ -451,10 +473,10 @@ static int bcm_enet_poll(struct napi_str
-       napi_complete(napi);
-       /* restore rx/tx interrupt */
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IRMASK_REG(priv->rx_chan));
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IRMASK_REG(priv->tx_chan));
-       return rx_work_done;
- }
-@@ -497,8 +519,8 @@ static irqreturn_t bcm_enet_isr_dma(int
-       priv = netdev_priv(dev);
-       /* mask rx/tx interrupts */
--      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-       napi_schedule(&priv->napi);
-@@ -557,8 +579,8 @@ static int bcm_enet_start_xmit(struct sk
-       wmb();
-       /* kick tx dma */
--      enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
--                      ENETDMA_CHANCFG_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+                       ENETDMAC_CHANCFG_REG(priv->tx_chan));
-       /* stop queue if no more desc available */
-       if (!priv->tx_desc_count)
-@@ -801,8 +823,8 @@ static int bcm_enet_open(struct net_devi
-       /* mask all interrupts and request them */
-       enet_writel(priv, 0, ENET_IRMASK_REG);
--      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
-@@ -891,28 +913,28 @@ static int bcm_enet_open(struct net_devi
-       }
-       /* write rx & tx ring addresses */
--      enet_dma_writel(priv, priv->rx_desc_dma,
--                      ENETDMA_RSTART_REG(priv->rx_chan));
--      enet_dma_writel(priv, priv->tx_desc_dma,
--                      ENETDMA_RSTART_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, priv->rx_desc_dma,
-+                       ENETDMAS_RSTART_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, priv->tx_desc_dma,
-+                       ENETDMAS_RSTART_REG(priv->tx_chan));
-       /* clear remaining state ram for rx & tx channel */
--      enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-       /* set max rx/tx length */
-       enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
-       enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
-       /* set dma maximum burst len */
--      enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
--                      ENETDMA_MAXBURST_REG(priv->rx_chan));
--      enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
--                      ENETDMA_MAXBURST_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+                       ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+                       ENETDMAC_MAXBURST_REG(priv->tx_chan));
-       /* set correct transmit fifo watermark */
-       enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
-@@ -930,26 +952,26 @@ static int bcm_enet_open(struct net_devi
-       val |= ENET_CTL_ENABLE_MASK;
-       enet_writel(priv, val, ENET_CTL_REG);
-       enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
--      enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
--                      ENETDMA_CHANCFG_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+                       ENETDMAC_CHANCFG_REG(priv->rx_chan));
-       /* watch "mib counters about to overflow" interrupt */
-       enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
-       enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
-       /* watch "packet transferred" interrupt in rx and tx */
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IR_REG(priv->rx_chan));
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IR_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IR_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IR_REG(priv->tx_chan));
-       /* make sure we enable napi before rx interrupt  */
-       napi_enable(&priv->napi);
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IRMASK_REG(priv->rx_chan));
--      enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
--                      ENETDMA_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IRMASK_REG(priv->tx_chan));
-       if (priv->has_phy)
-               phy_start(priv->phydev);
-@@ -1026,14 +1048,14 @@ static void bcm_enet_disable_dma(struct
- {
-       int limit;
--      enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_CHANCFG_REG(chan));
-       limit = 1000;
-       do {
-               u32 val;
--              val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
--              if (!(val & ENETDMA_CHANCFG_EN_MASK))
-+              val = enet_dmac_readl(priv, ENETDMAC_CHANCFG_REG(chan));
-+              if (!(val & ENETDMAC_CHANCFG_EN_MASK))
-                       break;
-               udelay(1);
-       } while (limit--);
-@@ -1059,8 +1081,8 @@ static int bcm_enet_stop(struct net_devi
-       /* mask all interrupts */
-       enet_writel(priv, 0, ENET_IRMASK_REG);
--      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
--      enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-       /* make sure no mib update is scheduled */
-       cancel_work_sync(&priv->mib_update_task);
-@@ -1598,7 +1620,7 @@ static int bcm_enet_probe(struct platfor
-       /* stop if shared driver failed, assume driver->probe will be
-        * called in the same order we register devices (correct ?) */
--      if (!bcm_enet_shared_base)
-+      if (!bcm_enet_shared_base[0])
-               return -ENODEV;
-       res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -1883,14 +1905,24 @@ struct platform_driver bcm63xx_enet_driv
- static int bcm_enet_shared_probe(struct platform_device *pdev)
- {
-       struct resource *res;
-+      void __iomem *p[3];
-+      unsigned int i;
--      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
--      if (!res)
--              return -ENODEV;
-+      memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
--      bcm_enet_shared_base = devm_request_and_ioremap(&pdev->dev, res);
--      if (!bcm_enet_shared_base)
--              return -ENOMEM;
-+      for (i = 0; i < 3; i++) {
-+              res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+              if (!res)
-+                      return -EINVAL;
-+
-+              p[i] = devm_request_and_ioremap(&pdev->dev, res);
-+              if (!p[i])
-+                      return -ENOMEM;
-+
-+              bcm_enet_shared_base[i] = p;
-+      }
-+
-+      memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.8/407-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch b/target/linux/brcm63xx/patches-3.8/407-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
deleted file mode 100644 (file)
index c9abd0a..0000000
+++ /dev/null
@@ -1,1511 +0,0 @@
-From d16c1a1410f6c35a835baaa445774b4421db6c96 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Sat, 23 Jan 2010 03:01:02 +0100
-Subject: [PATCH 8/8] bcm63xx_enet: add support for bcm6368 internal ethernet
- switch.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    4 +
- arch/mips/bcm63xx/dev-enet.c                       |  113 ++-
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    |   28 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h  |   50 +
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- drivers/net/ethernet/broadcom/bcm63xx_enet.c       | 1018 +++++++++++++++++++-
- drivers/net/ethernet/broadcom/bcm63xx_enet.h       |   75 ++
- 8 files changed, 1239 insertions(+), 66 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -924,6 +924,10 @@ int __init board_register_devices(void)
-           !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
-               bcm63xx_enet_register(1, &board.enet1);
-+      if (board.has_enetsw &&
-+          !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
-+              bcm63xx_enetsw_register(&board.enetsw);
-+
-       if (board.has_usbd)
-               bcm63xx_usbd_register(&board.usbd);
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -104,6 +104,64 @@ static struct platform_device bcm63xx_en
-       },
- };
-+static struct resource enetsw_res[] = {
-+      {
-+              /* start & end filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              /* start filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+      {
-+              /* start filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static struct bcm63xx_enetsw_platform_data enetsw_pd;
-+
-+static struct platform_device bcm63xx_enetsw_device = {
-+      .name           = "bcm63xx_enetsw",
-+      .num_resources  = ARRAY_SIZE(enetsw_res),
-+      .resource       = enetsw_res,
-+      .dev            = {
-+              .platform_data = &enetsw_pd,
-+      },
-+};
-+
-+static int __init register_shared(void)
-+{
-+      int ret, chan_count;
-+
-+      if (shared_device_registered)
-+              return 0;
-+
-+      shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
-+      shared_res[0].end = shared_res[0].start;
-+      shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
-+
-+      if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+              chan_count = 32;
-+      else
-+              chan_count = 16;
-+
-+      shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);
-+      shared_res[1].end = shared_res[1].start;
-+      shared_res[1].end += RSET_ENETDMAC_SIZE(chan_count)  - 1;
-+
-+      shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);
-+      shared_res[2].end = shared_res[2].start;
-+      shared_res[2].end += RSET_ENETDMAS_SIZE(chan_count)  - 1;
-+
-+      ret = platform_device_register(&bcm63xx_enet_shared_device);
-+      if (ret)
-+              return ret;
-+      shared_device_registered = 1;
-+
-+      return 0;
-+}
-+
- int __init bcm63xx_enet_register(int unit,
-                                const struct bcm63xx_enet_platform_data *pd)
- {
-@@ -117,24 +175,9 @@ int __init bcm63xx_enet_register(int uni
-       if (unit == 1 && BCMCPU_IS_6338())
-               return -ENODEV;
--      if (!shared_device_registered) {
--              shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
--              shared_res[0].end = shared_res[0].start;
--              shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
--
--              shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);
--              shared_res[1].end = shared_res[1].start;
--              shared_res[1].end += RSET_ENETDMAC_SIZE(16)  - 1;
--
--              shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);
--              shared_res[2].end = shared_res[2].start;
--              shared_res[2].end += RSET_ENETDMAS_SIZE(16)  - 1;
--
--              ret = platform_device_register(&bcm63xx_enet_shared_device);
--              if (ret)
--                      return ret;
--              shared_device_registered = 1;
--      }
-+      ret = register_shared();
-+      if (ret)
-+              return ret;
-       if (unit == 0) {
-               enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);
-@@ -175,3 +218,37 @@ int __init bcm63xx_enet_register(int uni
-               return ret;
-       return 0;
- }
-+
-+int __init
-+bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd)
-+{
-+      int ret;
-+
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
-+              return -ENODEV;
-+
-+      ret = register_shared();
-+      if (ret)
-+              return ret;
-+
-+      enetsw_res[0].start = bcm63xx_regset_address(RSET_ENETSW);
-+      enetsw_res[0].end = enetsw_res[0].start;
-+      enetsw_res[0].end += RSET_ENETSW_SIZE - 1;
-+      enetsw_res[1].start = bcm63xx_get_irq_number(IRQ_ENETSW_RXDMA0);
-+      enetsw_res[2].start = bcm63xx_get_irq_number(IRQ_ENETSW_TXDMA0);
-+      if (!enetsw_res[2].start)
-+              enetsw_res[2].start = -1;
-+
-+      memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof(*pd));
-+
-+      if (BCMCPU_IS_6328())
-+              enetsw_pd.num_ports = ENETSW_PORTS_6328;
-+      else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+              enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+
-+      ret = platform_device_register(&bcm63xx_enetsw_device);
-+      if (ret)
-+              return ret;
-+
-+      return 0;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -39,7 +39,35 @@ struct bcm63xx_enet_platform_data {
-                                           int phy_id, int reg, int val));
- };
-+/*
-+ * on board ethernet switch platform data
-+ */
-+#define ENETSW_MAX_PORT       8
-+#define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
-+#define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-+
-+#define ENETSW_RGMII_PORT0    4
-+
-+struct bcm63xx_enetsw_port {
-+      int             used;
-+      int             phy_id;
-+
-+      int             bypass_link;
-+      int             force_speed;
-+      int             force_duplex_full;
-+
-+      const char      *name;
-+};
-+
-+struct bcm63xx_enetsw_platform_data {
-+      char mac_addr[ETH_ALEN];
-+      int num_ports;
-+      struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-+};
-+
- int __init bcm63xx_enet_register(int unit,
-                                const struct bcm63xx_enet_platform_data *pd);
-+int bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
-+
- #endif /* ! BCM63XX_DEV_ENET_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -832,10 +832,60 @@
-  * _REG relative to RSET_ENETSW
-  *************************************************************************/
-+/* Port traffic control */
-+#define ENETSW_PTCTRL_REG(x)          (0x0 + (x))
-+#define ENETSW_PTCTRL_RXDIS_MASK      (1 << 0)
-+#define ENETSW_PTCTRL_TXDIS_MASK      (1 << 1)
-+
-+/* Switch mode register */
-+#define ENETSW_SWMODE_REG             (0xb)
-+#define ENETSW_SWMODE_FWD_EN_MASK     (1 << 1)
-+
-+/* IMP override Register */
-+#define ENETSW_IMPOV_REG              (0xe)
-+#define ENETSW_IMPOV_FORCE_MASK               (1 << 7)
-+#define ENETSW_IMPOV_TXFLOW_MASK      (1 << 5)
-+#define ENETSW_IMPOV_RXFLOW_MASK      (1 << 4)
-+#define ENETSW_IMPOV_1000_MASK                (1 << 3)
-+#define ENETSW_IMPOV_100_MASK         (1 << 2)
-+#define ENETSW_IMPOV_FDX_MASK         (1 << 1)
-+#define ENETSW_IMPOV_LINKUP_MASK      (1 << 0)
-+
-+/* Port override Register */
-+#define ENETSW_PORTOV_REG(x)          (0x58 + (x))
-+#define ENETSW_PORTOV_ENABLE_MASK     (1 << 6)
-+#define ENETSW_PORTOV_TXFLOW_MASK     (1 << 5)
-+#define ENETSW_PORTOV_RXFLOW_MASK     (1 << 4)
-+#define ENETSW_PORTOV_1000_MASK               (1 << 3)
-+#define ENETSW_PORTOV_100_MASK                (1 << 2)
-+#define ENETSW_PORTOV_FDX_MASK                (1 << 1)
-+#define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
-+
-+/* MDIO control register */
-+#define ENETSW_MDIOC_REG              (0xb0)
-+#define ENETSW_MDIOC_EXT_MASK         (1 << 16)
-+#define ENETSW_MDIOC_REG_SHIFT                20
-+#define ENETSW_MDIOC_PHYID_SHIFT      25
-+#define ENETSW_MDIOC_RD_MASK          (1 << 30)
-+#define ENETSW_MDIOC_WR_MASK          (1 << 31)
-+
-+/* MDIO data register */
-+#define ENETSW_MDIOD_REG              (0xb4)
-+
-+/* Global Management Configuration Register */
-+#define ENETSW_GMCR_REG                       (0x200)
-+#define ENETSW_GMCR_RST_MIB_MASK      (1 << 0)
-+
- /* MIB register */
- #define ENETSW_MIB_REG(x)             (0x2800 + (x) * 4)
- #define ENETSW_MIB_REG_COUNT          47
-+/* Jumbo control register port mask register */
-+#define ENETSW_JMBCTL_PORT_REG                (0x4004)
-+
-+/* Jumbo control mib good frame register */
-+#define ENETSW_JMBCTL_MAXSIZE_REG     (0x4008)
-+
- /*************************************************************************
-  * _REG relative to RSET_OHCI_PRIV
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -25,6 +25,7 @@ struct board_info {
-       /* enabled feature/device */
-       unsigned int    has_enet0:1;
-       unsigned int    has_enet1:1;
-+      unsigned int    has_enetsw:1;
-       unsigned int    has_pci:1;
-       unsigned int    has_pccard:1;
-       unsigned int    has_ohci0:1;
-@@ -37,6 +38,7 @@ struct board_info {
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
-       struct bcm63xx_enet_platform_data enet1;
-+      struct bcm63xx_enetsw_platform_data enetsw;
-       /* USB config */
-       struct bcm63xx_usbd_platform_data usbd;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -59,6 +59,49 @@ static inline void enet_writel(struct bc
- }
- /*
-+ * io helpers to access switch registers
-+ */
-+static inline u32 enetsw_readl(struct bcm_enet_priv *priv, u32 off)
-+{
-+      /* printk("enetsw_readl at %p\n", priv->base + off); */
-+      return bcm_readl(priv->base + off);
-+}
-+
-+static inline void enetsw_writel(struct bcm_enet_priv *priv,
-+                               u32 val, u32 off)
-+{
-+      /* printk("enetsw_writel %08x at %p\n", val, priv->base + off); */
-+      bcm_writel(val, priv->base + off);
-+}
-+
-+static inline u16 enetsw_readw(struct bcm_enet_priv *priv, u32 off)
-+{
-+      /* printk("enetsw_readw  at %p\n", priv->base + off); */
-+      return bcm_readw(priv->base + off);
-+}
-+
-+static inline void enetsw_writew(struct bcm_enet_priv *priv,
-+                               u16 val, u32 off)
-+{
-+      /* printk("enetsw_writew %04x at %p\n", val, priv->base + off); */
-+      bcm_writew(val, priv->base + off);
-+}
-+
-+static inline u8 enetsw_readb(struct bcm_enet_priv *priv, u32 off)
-+{
-+      /* printk("enetsw_readb  at %p\n", priv->base + off); */
-+      return bcm_readb(priv->base + off);
-+}
-+
-+static inline void enetsw_writeb(struct bcm_enet_priv *priv,
-+                               u8 val, u32 off)
-+{
-+      /* printk("enetsw_writeb %02x at %p\n", val, priv->base + off); */
-+      bcm_writeb(val, priv->base + off);
-+}
-+
-+
-+/*
-  * io helpers to access shared registers
-  */
- static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
-@@ -218,7 +261,6 @@ static int bcm_enet_refill_rx(struct net
-                       if (!skb)
-                               break;
-                       priv->rx_skb[desc_idx] = skb;
--
-                       p = dma_map_single(&priv->pdev->dev, skb->data,
-                                          priv->rx_skb_size,
-                                          DMA_FROM_DEVICE);
-@@ -321,7 +363,8 @@ static int bcm_enet_receive_queue(struct
-               }
-               /* recycle packet if it's marked as bad */
--              if (unlikely(len_stat & DMADESC_ERR_MASK)) {
-+              if (!priv->enet_is_sw &&
-+                  unlikely(len_stat & DMADESC_ERR_MASK)) {
-                       dev->stats.rx_errors++;
-                       if (len_stat & DMADESC_OVSIZE_MASK)
-@@ -552,6 +595,26 @@ static int bcm_enet_start_xmit(struct sk
-               goto out_unlock;
-       }
-+      /* pad small packets sent on a switch device */
-+      if (priv->enet_is_sw && skb->len < 64) {
-+              int needed = 64 - skb->len;
-+              char *data;
-+
-+              if (unlikely(skb_tailroom(skb) < needed)) {
-+                      struct sk_buff *nskb;
-+
-+                      nskb = skb_copy_expand(skb, 0, needed, GFP_ATOMIC);
-+                      if (!nskb) {
-+                              ret = NETDEV_TX_BUSY;
-+                              goto out_unlock;
-+                      }
-+                      dev_kfree_skb(skb);
-+                      skb = nskb;
-+              }
-+              data = skb_put(skb, needed);
-+              memset(data, 0, needed);
-+      }
-+
-       /* point to the next available desc */
-       desc = &priv->tx_desc_cpu[priv->tx_curr_desc];
-       priv->tx_skb[priv->tx_curr_desc] = skb;
-@@ -931,9 +994,9 @@ static int bcm_enet_open(struct net_devi
-       enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
-       /* set dma maximum burst len */
--      enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+      enet_dmac_writel(priv, priv->dma_maxburst,
-                        ENETDMAC_MAXBURST_REG(priv->rx_chan));
--      enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+      enet_dmac_writel(priv, priv->dma_maxburst,
-                        ENETDMAC_MAXBURST_REG(priv->tx_chan));
-       /* set correct transmit fifo watermark */
-@@ -1529,7 +1592,7 @@ static int compute_hw_mtu(struct bcm_ene
-        * it's appended
-        */
-       priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
--                                BCMENET_DMA_MAXBURST * 4);
-+                                priv->dma_maxburst * 4);
-       return 0;
- }
-@@ -1636,6 +1699,9 @@ static int bcm_enet_probe(struct platfor
-               return -ENOMEM;
-       priv = netdev_priv(dev);
-+      priv->enet_is_sw = false;
-+      priv->dma_maxburst = BCMENET_DMA_MAXBURST;
-+
-       ret = compute_hw_mtu(priv, dev->mtu);
-       if (ret)
-               goto out;
-@@ -1900,65 +1966,928 @@ struct platform_driver bcm63xx_enet_driv
- };
- /*
-- * reserve & remap memory space shared between all macs
-+ * switch mii access callbacks
-  */
--static int bcm_enet_shared_probe(struct platform_device *pdev)
-+static int bcmenet_sw_mdio_read(struct bcm_enet_priv *priv,
-+                              int ext, int phy_id, int location)
- {
--      struct resource *res;
--      void __iomem *p[3];
--      unsigned int i;
-+      u32 reg;
-+      int ret;
--      memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
-+      spin_lock_bh(&priv->enetsw_mdio_lock);
-+      enetsw_writel(priv, 0, ENETSW_MDIOC_REG);
--      for (i = 0; i < 3; i++) {
--              res = platform_get_resource(pdev, IORESOURCE_MEM, i);
--              if (!res)
--                      return -EINVAL;
-+      reg = ENETSW_MDIOC_RD_MASK |
-+              (phy_id << ENETSW_MDIOC_PHYID_SHIFT) |
-+              (location << ENETSW_MDIOC_REG_SHIFT);
-+
-+      if (ext)
-+              reg |= ENETSW_MDIOC_EXT_MASK;
-+
-+      enetsw_writel(priv, reg, ENETSW_MDIOC_REG);
-+      udelay(50);
-+      ret = enetsw_readw(priv, ENETSW_MDIOD_REG);
-+      spin_unlock_bh(&priv->enetsw_mdio_lock);
-+      return ret;
-+}
--              p[i] = devm_request_and_ioremap(&pdev->dev, res);
--              if (!p[i])
--                      return -ENOMEM;
-+static void bcmenet_sw_mdio_write(struct bcm_enet_priv *priv,
-+                               int ext, int phy_id, int location,
-+                               uint16_t data)
-+{
-+      u32 reg;
--              bcm_enet_shared_base[i] = p;
--      }
-+      spin_lock_bh(&priv->enetsw_mdio_lock);
-+      enetsw_writel(priv, 0, ENETSW_MDIOC_REG);
--      memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
-+      reg = ENETSW_MDIOC_WR_MASK |
-+              (phy_id << ENETSW_MDIOC_PHYID_SHIFT) |
-+              (location << ENETSW_MDIOC_REG_SHIFT);
--      return 0;
--}
-+      if (ext)
-+              reg |= ENETSW_MDIOC_EXT_MASK;
--static int bcm_enet_shared_remove(struct platform_device *pdev)
--{
--      return 0;
-+      reg |= data;
-+
-+      enetsw_writel(priv, reg, ENETSW_MDIOC_REG);
-+      udelay(50);
-+      spin_unlock_bh(&priv->enetsw_mdio_lock);
- }
- /*
-- * this "shared" driver is needed because both macs share a single
-- * address space
-+ * enet sw PHY polling
-  */
--struct platform_driver bcm63xx_enet_shared_driver = {
--      .probe  = bcm_enet_shared_probe,
--      .remove = bcm_enet_shared_remove,
--      .driver = {
--              .name   = "bcm63xx_enet_shared",
--              .owner  = THIS_MODULE,
--      },
--};
-+static void swphy_poll_timer(unsigned long data)
-+{
-+      struct bcm_enet_priv *priv = (struct bcm_enet_priv *)data;
-+      unsigned int i;
-+
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port;
-+              int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
-+              int external_phy = bcm_enet_port_is_rgmii(i);
-+              u8 override;
-+
-+              port = &priv->used_ports[i];
-+              if (!port->used)
-+                      continue;
-+
-+              if (port->bypass_link)
-+                      continue;
-+
-+              /* dummy read to clear */
-+              for (j = 0; j < 2; j++)
-+                      val = bcmenet_sw_mdio_read(priv, external_phy,
-+                                                 port->phy_id, MII_BMSR);
-+
-+              if (val == 0xffff)
-+                      continue;
-+
-+              up = (val & BMSR_LSTATUS) ? 1 : 0;
-+              if (!(up ^ priv->sw_port_link[i]))
-+                      continue;
-+
-+              priv->sw_port_link[i] = up;
-+
-+              /* link changed */
-+              if (!up) {
-+                      dev_info(&priv->pdev->dev, "link DOWN on %s\n",
-+                               port->name);
-+                      enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
-+                                    ENETSW_PORTOV_REG(i));
-+                      enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
-+                                    ENETSW_PTCTRL_TXDIS_MASK,
-+                                    ENETSW_PTCTRL_REG(i));
-+                      continue;
-+              }
-+
-+              advertise = bcmenet_sw_mdio_read(priv, external_phy,
-+                                               port->phy_id, MII_ADVERTISE);
-+
-+              lpa = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
-+                                         MII_LPA);
-+
-+              lpa2 = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
-+                                          MII_STAT1000);
-+
-+              /* figure out media and duplex from advertise and LPA values */
-+              media = mii_nway_result(lpa & advertise);
-+              duplex = (media & ADVERTISE_FULL) ? 1 : 0;
-+              if (lpa2 & LPA_1000FULL)
-+                      duplex = 1;
-+
-+              if (lpa2 & (LPA_1000FULL | LPA_1000HALF))
-+                      speed = 1000;
-+              else {
-+                      if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
-+                              speed = 100;
-+                      else
-+                              speed = 10;
-+              }
-+
-+              dev_info(&priv->pdev->dev,
-+                       "link UP on %s, %dMbps, %s-duplex\n",
-+                       port->name, speed, duplex ? "full" : "half");
-+
-+              override = ENETSW_PORTOV_ENABLE_MASK |
-+                      ENETSW_PORTOV_LINKUP_MASK;
-+
-+              if (speed == 1000)
-+                      override |= ENETSW_IMPOV_1000_MASK;
-+              else if (speed == 100)
-+                      override |= ENETSW_IMPOV_100_MASK;
-+              if (duplex)
-+                      override |= ENETSW_IMPOV_FDX_MASK;
-+
-+              enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
-+              enetsw_writeb(priv, 0, ENETSW_PTCTRL_REG(i));
-+      }
-+
-+      priv->swphy_poll.expires = jiffies + HZ;
-+      add_timer(&priv->swphy_poll);
-+}
- /*
-- * entry point
-+ * open callback, allocate dma rings & buffers and start rx operation
-  */
--static int __init bcm_enet_init(void)
-+static int bcm_enetsw_open(struct net_device *dev)
- {
--      int ret;
-+      struct bcm_enet_priv *priv;
-+      struct device *kdev;
-+      int i, ret;
-+      unsigned int size;
-+      void *p;
-+      u32 val;
--      ret = platform_driver_register(&bcm63xx_enet_shared_driver);
--      if (ret)
--              return ret;
-+      priv = netdev_priv(dev);
-+      kdev = &priv->pdev->dev;
--      ret = platform_driver_register(&bcm63xx_enet_driver);
-+      /* mask all interrupts and request them */
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+
-+      ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
-+                        IRQF_DISABLED, dev->name, dev);
-       if (ret)
--              platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+              goto out_freeirq;
-+
-+      if (priv->irq_tx != -1) {
-+              ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-+                                IRQF_DISABLED, dev->name, dev);
-+              if (ret)
-+                      goto out_freeirq_rx;
-+      }
-+
-+      /* allocate rx dma ring */
-+      size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
-+      p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL);
-+      if (!p) {
-+              dev_err(kdev, "cannot allocate rx ring %u\n", size);
-+              ret = -ENOMEM;
-+              goto out_freeirq_tx;
-+      }
-+
-+      memset(p, 0, size);
-+      priv->rx_desc_alloc_size = size;
-+      priv->rx_desc_cpu = p;
-+
-+      /* allocate tx dma ring */
-+      size = priv->tx_ring_size * sizeof(struct bcm_enet_desc);
-+      p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL);
-+      if (!p) {
-+              dev_err(kdev, "cannot allocate tx ring\n");
-+              ret = -ENOMEM;
-+              goto out_free_rx_ring;
-+      }
-+
-+      memset(p, 0, size);
-+      priv->tx_desc_alloc_size = size;
-+      priv->tx_desc_cpu = p;
-+
-+      priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size,
-+                             GFP_KERNEL);
-+      if (!priv->tx_skb) {
-+              dev_err(kdev, "cannot allocate rx skb queue\n");
-+              ret = -ENOMEM;
-+              goto out_free_tx_ring;
-+      }
-+
-+      priv->tx_desc_count = priv->tx_ring_size;
-+      priv->tx_dirty_desc = 0;
-+      priv->tx_curr_desc = 0;
-+      spin_lock_init(&priv->tx_lock);
-+
-+      /* init & fill rx ring with skbs */
-+      priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size,
-+                             GFP_KERNEL);
-+      if (!priv->rx_skb) {
-+              dev_err(kdev, "cannot allocate rx skb queue\n");
-+              ret = -ENOMEM;
-+              goto out_free_tx_skb;
-+      }
-+
-+      priv->rx_desc_count = 0;
-+      priv->rx_dirty_desc = 0;
-+      priv->rx_curr_desc = 0;
-+
-+      /* disable all ports */
-+      for (i = 0; i < priv->num_ports; i++) {
-+              enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
-+                            ENETSW_PORTOV_REG(i));
-+              enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
-+                            ENETSW_PTCTRL_TXDIS_MASK,
-+                            ENETSW_PTCTRL_REG(i));
-+
-+              priv->sw_port_link[i] = 0;
-+      }
-+
-+      /* reset mib */
-+      val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+      val |= ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+      val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+
-+      /* force CPU port state */
-+      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+      /* enable switch forward engine */
-+      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+      val |= ENETSW_SWMODE_FWD_EN_MASK;
-+      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+      /* enable jumbo on all ports */
-+      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+      /* initialize flow control buffer allocation */
-+      enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+                      ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+
-+      if (bcm_enet_refill_rx(dev)) {
-+              dev_err(kdev, "cannot allocate rx skb queue\n");
-+              ret = -ENOMEM;
-+              goto out;
-+      }
-+
-+      /* write rx & tx ring addresses */
-+      enet_dmas_writel(priv, priv->rx_desc_dma,
-+                       ENETDMAS_RSTART_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, priv->tx_desc_dma,
-+                       ENETDMAS_RSTART_REG(priv->tx_chan));
-+
-+      /* clear remaining state ram for rx & tx channel */
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-+
-+      /* set dma maximum burst len */
-+      enet_dmac_writel(priv, priv->dma_maxburst,
-+                       ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, priv->dma_maxburst,
-+                       ENETDMAC_MAXBURST_REG(priv->tx_chan));
-+
-+      /* set flow control low/high threshold to 1/3 / 2/3 */
-+      val = priv->rx_ring_size / 3;
-+      enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-+      val = (priv->rx_ring_size * 2) / 3;
-+      enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+
-+      /* all set, enable mac and interrupts, start dma engine and
-+       * kick rx dma channel */
-+      wmb();
-+      enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-+      enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+                       ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+
-+      /* watch "packet transferred" interrupt in rx and tx */
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IR_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IR_REG(priv->tx_chan));
-+
-+      /* make sure we enable napi before rx interrupt  */
-+      napi_enable(&priv->napi);
-+
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+                       ENETDMAC_IRMASK_REG(priv->tx_chan));
-+
-+      netif_carrier_on(dev);
-+      netif_start_queue(dev);
-+
-+      /*
-+       * apply override config for bypass_link ports here.
-+       */
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port;
-+              u8 override;
-+              port = &priv->used_ports[i];
-+              if (!port->used)
-+                      continue;
-+
-+              if (!port->bypass_link)
-+                      continue;
-+
-+              override = ENETSW_PORTOV_ENABLE_MASK |
-+                      ENETSW_PORTOV_LINKUP_MASK;
-+
-+              switch (port->force_speed) {
-+              case 1000:
-+                      override |= ENETSW_IMPOV_1000_MASK;
-+                      break;
-+              case 100:
-+                      override |= ENETSW_IMPOV_100_MASK;
-+                      break;
-+              case 10:
-+                      break;
-+              default:
-+                      printk(KERN_WARNING "invalid forced speed on port %s: assume 10\n",
-+                             port->name);
-+                      break;
-+              }
-+
-+              if (port->force_duplex_full)
-+                      override |= ENETSW_IMPOV_FDX_MASK;
-+
-+
-+              enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
-+              enetsw_writeb(priv, 0, ENETSW_PTCTRL_REG(i));
-+      }
-+
-+      /* start phy polling timer */
-+      init_timer(&priv->swphy_poll);
-+      priv->swphy_poll.function = swphy_poll_timer;
-+      priv->swphy_poll.data = (unsigned long)priv;
-+      priv->swphy_poll.expires = jiffies;
-+      add_timer(&priv->swphy_poll);
-+      return 0;
-+
-+out:
-+      for (i = 0; i < priv->rx_ring_size; i++) {
-+              struct bcm_enet_desc *desc;
-+
-+              if (!priv->rx_skb[i])
-+                      continue;
-+
-+              desc = &priv->rx_desc_cpu[i];
-+              dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
-+                               DMA_FROM_DEVICE);
-+              kfree_skb(priv->rx_skb[i]);
-+      }
-+      kfree(priv->rx_skb);
-+
-+out_free_tx_skb:
-+      kfree(priv->tx_skb);
-+
-+out_free_tx_ring:
-+      dma_free_coherent(kdev, priv->tx_desc_alloc_size,
-+                        priv->tx_desc_cpu, priv->tx_desc_dma);
-+
-+out_free_rx_ring:
-+      dma_free_coherent(kdev, priv->rx_desc_alloc_size,
-+                        priv->rx_desc_cpu, priv->rx_desc_dma);
-+
-+out_freeirq_tx:
-+      if (priv->irq_tx != -1)
-+              free_irq(priv->irq_tx, dev);
-+
-+out_freeirq_rx:
-+      free_irq(priv->irq_rx, dev);
-+
-+out_freeirq:
-+      return ret;
-+}
-+
-+/*
-+ * stop callback
-+ */
-+static int bcm_enetsw_stop(struct net_device *dev)
-+{
-+      struct bcm_enet_priv *priv;
-+      struct device *kdev;
-+      int i;
-+
-+      priv = netdev_priv(dev);
-+      kdev = &priv->pdev->dev;
-+
-+      del_timer_sync(&priv->swphy_poll);
-+      netif_stop_queue(dev);
-+      napi_disable(&priv->napi);
-+      del_timer_sync(&priv->rx_timeout);
-+
-+      /* mask all interrupts */
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+
-+      /* disable dma & mac */
-+      bcm_enet_disable_dma(priv, priv->tx_chan);
-+      bcm_enet_disable_dma(priv, priv->rx_chan);
-+
-+      /* force reclaim of all tx buffers */
-+      bcm_enet_tx_reclaim(dev, 1);
-+
-+      /* free the rx skb ring */
-+      for (i = 0; i < priv->rx_ring_size; i++) {
-+              struct bcm_enet_desc *desc;
-+
-+              if (!priv->rx_skb[i])
-+                      continue;
-+
-+              desc = &priv->rx_desc_cpu[i];
-+              dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
-+                               DMA_FROM_DEVICE);
-+              kfree_skb(priv->rx_skb[i]);
-+      }
-+
-+      /* free remaining allocated memory */
-+      kfree(priv->rx_skb);
-+      kfree(priv->tx_skb);
-+      dma_free_coherent(kdev, priv->rx_desc_alloc_size,
-+                        priv->rx_desc_cpu, priv->rx_desc_dma);
-+      dma_free_coherent(kdev, priv->tx_desc_alloc_size,
-+                        priv->tx_desc_cpu, priv->tx_desc_dma);
-+      if (priv->irq_tx != -1)
-+              free_irq(priv->irq_tx, dev);
-+      free_irq(priv->irq_rx, dev);
-+
-+      return 0;
-+}
-+
-+/*
-+ * try to sort out phy external status by walking the used_port field
-+ * in the bcm_enet_priv structure. in case the phy address is not
-+ * assigned to any physical port on the switch, assume it is external
-+ * (and yell at the user).
-+ */
-+static int bcm_enetsw_phy_is_external(struct bcm_enet_priv *priv, int phy_id)
-+{
-+      int i;
-+
-+      for (i = 0; i < priv->num_ports; ++i) {
-+              if (!priv->used_ports[i].used)
-+                      continue;
-+              if (priv->used_ports[i].phy_id == phy_id)
-+                      return bcm_enet_port_is_rgmii(i);
-+      }
-+
-+      printk_once(KERN_WARNING  "bcm63xx_enet: could not find a used port with phy_id %i, assuming phy is external\n",
-+                  phy_id);
-+      return 1;
-+}
-+
-+/*
-+ * can't use bcmenet_sw_mdio_read directly as we need to sort out
-+ * external/internal status of the given phy_id first.
-+ */
-+static int bcm_enetsw_mii_mdio_read(struct net_device *dev, int phy_id,
-+                                  int location)
-+{
-+      struct bcm_enet_priv *priv;
-+
-+      priv = netdev_priv(dev);
-+      return bcmenet_sw_mdio_read(priv,
-+                                  bcm_enetsw_phy_is_external(priv, phy_id),
-+                                  phy_id, location);
-+}
-+
-+/*
-+ * can't use bcmenet_sw_mdio_write directly as we need to sort out
-+ * external/internal status of the given phy_id first.
-+ */
-+static void bcm_enetsw_mii_mdio_write(struct net_device *dev, int phy_id,
-+                                    int location,
-+                                    int val)
-+{
-+      struct bcm_enet_priv *priv;
-+
-+      priv = netdev_priv(dev);
-+      bcmenet_sw_mdio_write(priv, bcm_enetsw_phy_is_external(priv, phy_id),
-+                            phy_id, location, val);
-+}
-+
-+static int bcm_enetsw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+      struct mii_if_info mii;
-+
-+      mii.dev = dev;
-+      mii.mdio_read = bcm_enetsw_mii_mdio_read;
-+      mii.mdio_write = bcm_enetsw_mii_mdio_write;
-+      mii.phy_id = 0;
-+      mii.phy_id_mask = 0x3f;
-+      mii.reg_num_mask = 0x1f;
-+      return generic_mii_ioctl(&mii, if_mii(rq), cmd, NULL);
-+
-+}
-+
-+static const struct net_device_ops bcm_enetsw_ops = {
-+      .ndo_open               = bcm_enetsw_open,
-+      .ndo_stop               = bcm_enetsw_stop,
-+      .ndo_start_xmit         = bcm_enet_start_xmit,
-+      .ndo_change_mtu         = bcm_enet_change_mtu,
-+      .ndo_do_ioctl           = bcm_enetsw_ioctl,
-+};
-+
-+
-+static const struct bcm_enet_stats bcm_enetsw_gstrings_stats[] = {
-+      { "rx_packets", DEV_STAT(rx_packets), -1 },
-+      { "tx_packets", DEV_STAT(tx_packets), -1 },
-+      { "rx_bytes", DEV_STAT(rx_bytes), -1 },
-+      { "tx_bytes", DEV_STAT(tx_bytes), -1 },
-+      { "rx_errors", DEV_STAT(rx_errors), -1 },
-+      { "tx_errors", DEV_STAT(tx_errors), -1 },
-+      { "rx_dropped", DEV_STAT(rx_dropped), -1 },
-+      { "tx_dropped", DEV_STAT(tx_dropped), -1 },
-+
-+      { "tx_good_octets", GEN_STAT(mib.tx_gd_octets), ETHSW_MIB_RX_GD_OCT },
-+      { "tx_unicast", GEN_STAT(mib.tx_unicast), ETHSW_MIB_RX_BRDCAST },
-+      { "tx_broadcast", GEN_STAT(mib.tx_brdcast), ETHSW_MIB_RX_BRDCAST },
-+      { "tx_multicast", GEN_STAT(mib.tx_mult), ETHSW_MIB_RX_MULT },
-+      { "tx_64_octets", GEN_STAT(mib.tx_64), ETHSW_MIB_RX_64 },
-+      { "tx_65_127_oct", GEN_STAT(mib.tx_65_127), ETHSW_MIB_RX_65_127 },
-+      { "tx_128_255_oct", GEN_STAT(mib.tx_128_255), ETHSW_MIB_RX_128_255 },
-+      { "tx_256_511_oct", GEN_STAT(mib.tx_256_511), ETHSW_MIB_RX_256_511 },
-+      { "tx_512_1023_oct", GEN_STAT(mib.tx_512_1023), ETHSW_MIB_RX_512_1023},
-+      { "tx_1024_1522_oct", GEN_STAT(mib.tx_1024_max),
-+        ETHSW_MIB_RX_1024_1522 },
-+      { "tx_1523_2047_oct", GEN_STAT(mib.tx_1523_2047),
-+        ETHSW_MIB_RX_1523_2047 },
-+      { "tx_2048_4095_oct", GEN_STAT(mib.tx_2048_4095),
-+        ETHSW_MIB_RX_2048_4095 },
-+      { "tx_4096_8191_oct", GEN_STAT(mib.tx_4096_8191),
-+        ETHSW_MIB_RX_4096_8191 },
-+      { "tx_8192_9728_oct", GEN_STAT(mib.tx_8192_9728),
-+        ETHSW_MIB_RX_8192_9728 },
-+      { "tx_oversize", GEN_STAT(mib.tx_ovr), ETHSW_MIB_RX_OVR },
-+      { "tx_oversize_drop", GEN_STAT(mib.tx_ovr), ETHSW_MIB_RX_OVR_DISC },
-+      { "tx_dropped", GEN_STAT(mib.tx_drop), ETHSW_MIB_RX_DROP },
-+      { "tx_undersize", GEN_STAT(mib.tx_underrun), ETHSW_MIB_RX_UND },
-+      { "tx_pause", GEN_STAT(mib.tx_pause), ETHSW_MIB_RX_PAUSE },
-+
-+      { "rx_good_octets", GEN_STAT(mib.rx_gd_octets), ETHSW_MIB_TX_ALL_OCT },
-+      { "rx_broadcast", GEN_STAT(mib.rx_brdcast), ETHSW_MIB_TX_BRDCAST },
-+      { "rx_multicast", GEN_STAT(mib.rx_mult), ETHSW_MIB_TX_MULT },
-+      { "rx_unicast", GEN_STAT(mib.rx_unicast), ETHSW_MIB_TX_MULT },
-+      { "rx_pause", GEN_STAT(mib.rx_pause), ETHSW_MIB_TX_PAUSE },
-+      { "rx_dropped", GEN_STAT(mib.rx_drop), ETHSW_MIB_TX_DROP_PKTS },
-+
-+};
-+
-+#define BCM_ENETSW_STATS_LEN  \
-+      (sizeof(bcm_enetsw_gstrings_stats) / sizeof(struct bcm_enet_stats))
-+
-+static void bcm_enetsw_get_strings(struct net_device *netdev,
-+                                 u32 stringset, u8 *data)
-+{
-+      int i;
-+
-+      switch (stringset) {
-+      case ETH_SS_STATS:
-+              for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
-+                      memcpy(data + i * ETH_GSTRING_LEN,
-+                             bcm_enetsw_gstrings_stats[i].stat_string,
-+                             ETH_GSTRING_LEN);
-+              }
-+              break;
-+      }
-+}
-+
-+static int bcm_enetsw_get_sset_count(struct net_device *netdev,
-+                                   int string_set)
-+{
-+      switch (string_set) {
-+      case ETH_SS_STATS:
-+              return BCM_ENETSW_STATS_LEN;
-+      default:
-+              return -EINVAL;
-+      }
-+}
-+
-+static void bcm_enetsw_get_drvinfo(struct net_device *netdev,
-+                                 struct ethtool_drvinfo *drvinfo)
-+{
-+      strncpy(drvinfo->driver, bcm_enet_driver_name, 32);
-+      strncpy(drvinfo->version, bcm_enet_driver_version, 32);
-+      strncpy(drvinfo->fw_version, "N/A", 32);
-+      strncpy(drvinfo->bus_info, "bcm63xx", 32);
-+      drvinfo->n_stats = BCM_ENETSW_STATS_LEN;
-+}
-+
-+static void bcm_enetsw_get_ethtool_stats(struct net_device *netdev,
-+                                       struct ethtool_stats *stats,
-+                                       u64 *data)
-+{
-+      struct bcm_enet_priv *priv;
-+      int i;
-+
-+      priv = netdev_priv(netdev);
-+
-+      for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
-+              const struct bcm_enet_stats *s;
-+              u32 lo, hi;
-+              char *p;
-+              int reg;
-+
-+              s = &bcm_enetsw_gstrings_stats[i];
-+
-+              reg = s->mib_reg;
-+              if (reg == -1)
-+                      continue;
-+
-+              lo = enetsw_readl(priv, ENETSW_MIB_REG(reg));
-+              p = (char *)priv + s->stat_offset;
-+
-+              if (s->sizeof_stat == sizeof(u64)) {
-+                      hi = enetsw_readl(priv, ENETSW_MIB_REG(reg + 1));
-+                      *(u64 *)p = ((u64)hi << 32 | lo);
-+              } else {
-+                      *(u32 *)p = lo;
-+              }
-+      }
-+
-+      for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
-+              const struct bcm_enet_stats *s;
-+              char *p;
-+
-+              s = &bcm_enetsw_gstrings_stats[i];
-+
-+              if (s->mib_reg == -1)
-+                      p = (char *)&netdev->stats + s->stat_offset;
-+              else
-+                      p = (char *)priv + s->stat_offset;
-+
-+              data[i] = (s->sizeof_stat == sizeof(u64)) ?
-+                      *(u64 *)p : *(u32 *)p;
-+      }
-+}
-+
-+static void bcm_enetsw_get_ringparam(struct net_device *dev,
-+                                   struct ethtool_ringparam *ering)
-+{
-+      struct bcm_enet_priv *priv;
-+
-+      priv = netdev_priv(dev);
-+
-+      /* rx/tx ring is actually only limited by memory */
-+      ering->rx_max_pending = 8192;
-+      ering->tx_max_pending = 8192;
-+      ering->rx_mini_max_pending = 0;
-+      ering->rx_jumbo_max_pending = 0;
-+      ering->rx_pending = priv->rx_ring_size;
-+      ering->tx_pending = priv->tx_ring_size;
-+}
-+
-+static int bcm_enetsw_set_ringparam(struct net_device *dev,
-+                                  struct ethtool_ringparam *ering)
-+{
-+      struct bcm_enet_priv *priv;
-+      int was_running;
-+
-+      priv = netdev_priv(dev);
-+
-+      was_running = 0;
-+      if (netif_running(dev)) {
-+              bcm_enetsw_stop(dev);
-+              was_running = 1;
-+      }
-+
-+      priv->rx_ring_size = ering->rx_pending;
-+      priv->tx_ring_size = ering->tx_pending;
-+
-+      if (was_running) {
-+              int err;
-+
-+              err = bcm_enetsw_open(dev);
-+              if (err)
-+                      dev_close(dev);
-+      }
-+      return 0;
-+}
-+
-+static struct ethtool_ops bcm_enetsw_ethtool_ops = {
-+      .get_strings            = bcm_enetsw_get_strings,
-+      .get_sset_count         = bcm_enetsw_get_sset_count,
-+      .get_ethtool_stats      = bcm_enetsw_get_ethtool_stats,
-+      .get_drvinfo            = bcm_enetsw_get_drvinfo,
-+      .get_ringparam          = bcm_enetsw_get_ringparam,
-+      .set_ringparam          = bcm_enetsw_set_ringparam,
-+};
-+
-+/*
-+ * allocate netdevice, request register memory and register device.
-+ */
-+static int bcm_enetsw_probe(struct platform_device *pdev)
-+{
-+      struct bcm_enet_priv *priv;
-+      struct net_device *dev;
-+      struct bcm63xx_enetsw_platform_data *pd;
-+      struct resource *res_mem;
-+      int ret, irq_rx, irq_tx;
-+
-+      /* stop if shared driver failed, assume driver->probe will be
-+       * called in the same order we register devices (correct ?) */
-+      if (!bcm_enet_shared_base[0])
-+              return -ENODEV;
-+
-+      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      irq_rx = platform_get_irq(pdev, 0);
-+      irq_tx = platform_get_irq(pdev, 1);
-+      if (!res_mem || irq_rx < 0)
-+              return -ENODEV;
-+
-+      ret = 0;
-+      dev = alloc_etherdev(sizeof(*priv));
-+      if (!dev)
-+              return -ENOMEM;
-+      priv = netdev_priv(dev);
-+      memset(priv, 0, sizeof(*priv));
-+
-+      /* initialize default and fetch platform data */
-+      priv->enet_is_sw = true;
-+      priv->irq_rx = irq_rx;
-+      priv->irq_tx = irq_tx;
-+      priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-+      priv->tx_ring_size = BCMENET_DEF_TX_DESC;
-+      priv->dma_maxburst = BCMENETSW_DMA_MAXBURST;
-+
-+      pd = pdev->dev.platform_data;
-+      if (pd) {
-+              memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
-+              memcpy(priv->used_ports, pd->used_ports,
-+                     sizeof (pd->used_ports));
-+              priv->num_ports = pd->num_ports;
-+      }
-+
-+      ret = compute_hw_mtu(priv, dev->mtu);
-+      if (ret)
-+              goto out;
-+
-+      if (!request_mem_region(res_mem->start, resource_size(res_mem),
-+                              "bcm63xx_enetsw")) {
-+              ret = -EBUSY;
-+              goto out;
-+      }
-+
-+      priv->base = ioremap(res_mem->start, resource_size(res_mem));
-+      if (priv->base == NULL) {
-+              ret = -ENOMEM;
-+              goto out_release_mem;
-+      }
-+
-+      priv->mac_clk = clk_get(&pdev->dev, "enetsw");
-+      if (IS_ERR(priv->mac_clk)) {
-+              ret = PTR_ERR(priv->mac_clk);
-+              goto out_unmap;
-+      }
-+      clk_enable(priv->mac_clk);
-+
-+      priv->rx_chan = 0;
-+      priv->tx_chan = 1;
-+      spin_lock_init(&priv->rx_lock);
-+
-+      /* init rx timeout (used for oom) */
-+      init_timer(&priv->rx_timeout);
-+      priv->rx_timeout.function = bcm_enet_refill_rx_timer;
-+      priv->rx_timeout.data = (unsigned long)dev;
-+
-+      /* register netdevice */
-+      dev->netdev_ops = &bcm_enetsw_ops;
-+      netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+      SET_ETHTOOL_OPS(dev, &bcm_enetsw_ethtool_ops);
-+      SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+      spin_lock_init(&priv->enetsw_mdio_lock);
-+
-+      ret = register_netdev(dev);
-+      if (ret)
-+              goto out_put_clk;
-+
-+      netif_carrier_off(dev);
-+      platform_set_drvdata(pdev, dev);
-+      priv->pdev = pdev;
-+      priv->net_dev = dev;
-+
-+      return 0;
-+
-+out_put_clk:
-+      clk_put(priv->mac_clk);
-+
-+out_unmap:
-+      iounmap(priv->base);
-+
-+out_release_mem:
-+      release_mem_region(res_mem->start, resource_size(res_mem));
-+out:
-+      free_netdev(dev);
-+      return ret;
-+}
-+
-+
-+/*
-+ * exit func, stops hardware and unregisters netdevice
-+ */
-+static int bcm_enetsw_remove(struct platform_device *pdev)
-+{
-+      struct bcm_enet_priv *priv;
-+      struct net_device *dev;
-+      struct resource *res;
-+
-+      /* stop netdevice */
-+      dev = platform_get_drvdata(pdev);
-+      priv = netdev_priv(dev);
-+      unregister_netdev(dev);
-+
-+      /* release device resources */
-+      iounmap(priv->base);
-+      res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      release_mem_region(res->start, resource_size(res));
-+
-+      platform_set_drvdata(pdev, NULL);
-+      free_netdev(dev);
-+      return 0;
-+}
-+
-+struct platform_driver bcm63xx_enetsw_driver = {
-+      .probe  = bcm_enetsw_probe,
-+      .remove = bcm_enetsw_remove,
-+      .driver = {
-+              .name   = "bcm63xx_enetsw",
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+/*
-+ * reserve & remap memory space shared between all macs
-+ */
-+static int bcm_enet_shared_probe(struct platform_device *pdev)
-+{
-+      struct resource *res;
-+      void __iomem *p[3];
-+      unsigned int i;
-+
-+      memset(bcm_enet_shared_base, 0, sizeof(bcm_enet_shared_base));
-+
-+      for (i = 0; i < 3; i++) {
-+              res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+              if (!res)
-+                      return -EINVAL;
-+
-+              p[i] = devm_request_and_ioremap(&pdev->dev, res);
-+              if (!p[i])
-+                      return -ENOMEM;
-+      }
-+
-+      memcpy(bcm_enet_shared_base, p, sizeof(bcm_enet_shared_base));
-+
-+      return 0;
-+}
-+
-+static int bcm_enet_shared_remove(struct platform_device *pdev)
-+{
-+      return 0;
-+}
-+
-+/*
-+ * this "shared" driver is needed because both macs share a single
-+ * address space
-+ */
-+struct platform_driver bcm63xx_enet_shared_driver = {
-+      .probe  = bcm_enet_shared_probe,
-+      .remove = bcm_enet_shared_remove,
-+      .driver = {
-+              .name   = "bcm63xx_enet_shared",
-+              .owner  = THIS_MODULE,
-+      },
-+};
-+
-+/*
-+ * entry point
-+ */
-+static int __init bcm_enet_init(void)
-+{
-+      int ret;
-+
-+      ret = platform_driver_register(&bcm63xx_enet_shared_driver);
-+      if (ret)
-+              return ret;
-+
-+      ret = platform_driver_register(&bcm63xx_enet_driver);
-+      if (ret)
-+              platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+
-+      ret = platform_driver_register(&bcm63xx_enetsw_driver);
-+      if (ret) {
-+              platform_driver_unregister(&bcm63xx_enet_driver);
-+              platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+      }
-       return ret;
- }
-@@ -1966,6 +2895,7 @@ static int __init bcm_enet_init(void)
- static void __exit bcm_enet_exit(void)
- {
-       platform_driver_unregister(&bcm63xx_enet_driver);
-+      platform_driver_unregister(&bcm63xx_enetsw_driver);
-       platform_driver_unregister(&bcm63xx_enet_shared_driver);
- }
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -18,6 +18,7 @@
- /* maximum burst len for dma (4 bytes unit) */
- #define BCMENET_DMA_MAXBURST  16
-+#define BCMENETSW_DMA_MAXBURST        8
- /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
-  * must be low enough so that a DMA transfer of above burst length can
-@@ -84,11 +85,60 @@
- #define ETH_MIB_RX_CNTRL                      54
-+/*
-+ * SW MIB Counters register definitions
-+*/
-+#define ETHSW_MIB_TX_ALL_OCT                  0
-+#define ETHSW_MIB_TX_DROP_PKTS                        2
-+#define ETHSW_MIB_TX_QOS_PKTS                 3
-+#define ETHSW_MIB_TX_BRDCAST                  4
-+#define ETHSW_MIB_TX_MULT                     5
-+#define ETHSW_MIB_TX_UNI                      6
-+#define ETHSW_MIB_TX_COL                      7
-+#define ETHSW_MIB_TX_1_COL                    8
-+#define ETHSW_MIB_TX_M_COL                    9
-+#define ETHSW_MIB_TX_DEF                      10
-+#define ETHSW_MIB_TX_LATE                     11
-+#define ETHSW_MIB_TX_EX_COL                   12
-+#define ETHSW_MIB_TX_PAUSE                    14
-+#define ETHSW_MIB_TX_QOS_OCT                  15
-+
-+#define ETHSW_MIB_RX_ALL_OCT                  17
-+#define ETHSW_MIB_RX_UND                      19
-+#define ETHSW_MIB_RX_PAUSE                    20
-+#define ETHSW_MIB_RX_64                               21
-+#define ETHSW_MIB_RX_65_127                   22
-+#define ETHSW_MIB_RX_128_255                  23
-+#define ETHSW_MIB_RX_256_511                  24
-+#define ETHSW_MIB_RX_512_1023                 25
-+#define ETHSW_MIB_RX_1024_1522                        26
-+#define ETHSW_MIB_RX_OVR                      27
-+#define ETHSW_MIB_RX_JAB                      28
-+#define ETHSW_MIB_RX_ALIGN                    29
-+#define ETHSW_MIB_RX_CRC                      30
-+#define ETHSW_MIB_RX_GD_OCT                   31
-+#define ETHSW_MIB_RX_DROP                     33
-+#define ETHSW_MIB_RX_UNI                      34
-+#define ETHSW_MIB_RX_MULT                     35
-+#define ETHSW_MIB_RX_BRDCAST                  36
-+#define ETHSW_MIB_RX_SA_CHANGE                        37
-+#define ETHSW_MIB_RX_FRAG                     38
-+#define ETHSW_MIB_RX_OVR_DISC                 39
-+#define ETHSW_MIB_RX_SYM                      40
-+#define ETHSW_MIB_RX_QOS_PKTS                 41
-+#define ETHSW_MIB_RX_QOS_OCT                  42
-+#define ETHSW_MIB_RX_1523_2047                        44
-+#define ETHSW_MIB_RX_2048_4095                        45
-+#define ETHSW_MIB_RX_4096_8191                        46
-+#define ETHSW_MIB_RX_8192_9728                        47
-+
-+
- struct bcm_enet_mib_counters {
-       u64 tx_gd_octets;
-       u32 tx_gd_pkts;
-       u32 tx_all_octets;
-       u32 tx_all_pkts;
-+      u32 tx_unicast;
-       u32 tx_brdcast;
-       u32 tx_mult;
-       u32 tx_64;
-@@ -97,7 +147,12 @@ struct bcm_enet_mib_counters {
-       u32 tx_256_511;
-       u32 tx_512_1023;
-       u32 tx_1024_max;
-+      u32 tx_1523_2047;
-+      u32 tx_2048_4095;
-+      u32 tx_4096_8191;
-+      u32 tx_8192_9728;
-       u32 tx_jab;
-+      u32 tx_drop;
-       u32 tx_ovr;
-       u32 tx_frag;
-       u32 tx_underrun;
-@@ -114,6 +169,7 @@ struct bcm_enet_mib_counters {
-       u32 rx_all_octets;
-       u32 rx_all_pkts;
-       u32 rx_brdcast;
-+      u32 rx_unicast;
-       u32 rx_mult;
-       u32 rx_64;
-       u32 rx_65_127;
-@@ -197,6 +253,9 @@ struct bcm_enet_priv {
-       /* number of dma desc in tx ring */
-       int tx_ring_size;
-+      /* maximum dma burst size */
-+      int dma_maxburst;
-+
-       /* cpu view of rx dma ring */
-       struct bcm_enet_desc *tx_desc_cpu;
-@@ -269,6 +328,22 @@ struct bcm_enet_priv {
-       /* maximum hardware transmit/receive size */
-       unsigned int hw_mtu;
-+
-+      bool enet_is_sw;
-+
-+      /* port mapping for switch devices */
-+      int num_ports;
-+      struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-+      int sw_port_link[ENETSW_MAX_PORT];
-+
-+      /* used to poll switch port state */
-+      struct timer_list swphy_poll;
-+      spinlock_t enetsw_mdio_lock;
- };
-+static inline int bcm_enet_port_is_rgmii(int portid)
-+{
-+      return portid >= ENETSW_RGMII_PORT0;
-+}
-+
- #endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.8/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.8/408-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644 (file)
index f8e92dc..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |   13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c      |   12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -861,6 +861,19 @@
- #define ENETSW_PORTOV_FDX_MASK                (1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK     (1 << 0)
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x)      (0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK       (3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE  (0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE    (1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE  (2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN       (1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x)    (0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG              (0xb0)
- #define ENETSW_MDIOC_EXT_MASK         (1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2201,6 +2201,18 @@ static int bcm_enetsw_open(struct net_de
-               priv->sw_port_link[i] = 0;
-       }
-+      /* enable external ports */
-+      for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+              u8 rgmii_ctrl;
-+
-+              if (!priv->used_ports[i].used)
-+                      continue;
-+
-+              rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+              rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+              enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+      }
-+
-       /* reset mib */
-       val = enetsw_readb(priv, ENETSW_GMCR_REG);
-       val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-3.8/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch b/target/linux/brcm63xx/patches-3.8/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch
deleted file mode 100644 (file)
index 48774a3..0000000
+++ /dev/null
@@ -1,134 +0,0 @@
-From 261ee140e75615351128eee497e6bbd76686784b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:18:26 +0100
-Subject: [PATCH 51/72] MIPS: BCM63XX: add HS SPI platform device and register
- it
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/Makefile                         |    4 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |    2 +
- arch/mips/bcm63xx/dev-hsspi.c                      |   57 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |   20 +++++++
- 4 files changed, 81 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-hsspi.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,8 @@
- obj-y         += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o reset.o \
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
--                 dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-wdt.o \
--                 dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o usb-common.o
-+                 dev-hsspi.o dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o \
-+                 dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
-+                 usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -26,6 +26,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ehci.h>
-@@ -952,6 +953,7 @@ int __init board_register_devices(void)
-                       pr_err(PFX "failed to register fallback SPROM\n");
-       }
- #endif
-+      bcm63xx_hsspi_register();
-       bcm63xx_spi_register();
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -0,0 +1,60 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_regs.h>
-+
-+static struct resource spi_resources[] = {
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .end            = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      },
-+      {
-+              .start          = -1, /* filled at runtime */
-+              .flags          = IORESOURCE_IRQ,
-+      },
-+};
-+
-+static struct bcm63xx_hsspi_pdata spi_pdata = {
-+      .bus_num        = 1,
-+};
-+
-+static struct platform_device bcm63xx_hsspi_device = {
-+      .name           = "bcm63xx-hsspi",
-+      .id             = 0,
-+      .num_resources  = ARRAY_SIZE(spi_resources),
-+      .resource       = spi_resources,
-+      .dev            = {
-+              .platform_data = &spi_pdata,
-+      },
-+};
-+
-+int __init bcm63xx_hsspi_register(void)
-+{
-+
-+      if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
-+              return -ENODEV;
-+
-+      spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
-+      spi_resources[0].end = spi_resources[0].start;
-+      spi_resources[0].end += RSET_HSSPI_SIZE - 1;
-+      spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
-+
-+      if (BCMCPU_IS_6328())
-+              spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
-+      else if (BCMCPU_IS_6362())
-+              spi_pdata.speed_hz = HSSPI_PLL_HZ_6362;
-+
-+      return platform_device_register(&bcm63xx_hsspi_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -0,0 +1,21 @@
-+#ifndef BCM63XX_DEV_HSSPI_H
-+#define BCM63XX_DEV_HSSPI_H
-+
-+#include <linux/types.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+
-+int __init bcm63xx_hsspi_register(void);
-+
-+struct bcm63xx_hsspi_pdata {
-+      int             bus_num;
-+      u32             speed_hz;
-+};
-+
-+#define bcm_hsspi_readl(o)    bcm_rset_readl(RSET_HSSPI, (o))
-+#define bcm_hsspi_writel(v, o)        bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+#define HSSPI_PLL_HZ_6328     133333333
-+#define HSSPI_PLL_HZ_6362     400000000
-+
-+#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/brcm63xx/patches-3.8/410-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch b/target/linux/brcm63xx/patches-3.8/410-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
deleted file mode 100644 (file)
index e6b47c1..0000000
+++ /dev/null
@@ -1,481 +0,0 @@
-From 4b27423676485d05bcd6fc6f3809164fb8f9d22d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 30/60] SPI: MIPS: BCM63XX: Add HSSPI driver
-
-Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h   |    2 +
- drivers/spi/Kconfig                                |    7 +
- drivers/spi/Makefile                               |    1 +
- drivers/spi/spi-bcm63xx-hsspi.c                    |  427 ++++++++++++++++++++
- 4 files changed, 437 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -18,4 +18,6 @@ struct bcm63xx_hsspi_pdata {
- #define HSSPI_PLL_HZ_6328     133333333
- #define HSSPI_PLL_HZ_6362     400000000
-+#define HSSPI_BUFFER_LEN      512
-+
- #endif /* BCM63XX_DEV_HSSPI_H */
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -100,6 +100,13 @@ config SPI_BCM63XX
-       help
-           Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
-+config SPI_BCM63XX_HSSPI
-+      tristate "Broadcom BCM63XX HS SPI controller driver"
-+      depends on BCM63XX
-+      help
-+        This enables support for the High Speed SPI controller present on
-+        newer Broadcom BCM63XX SoCs.
-+
- config SPI_BITBANG
-       tristate "Utilities for Bitbanging SPI masters"
-       help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL)                      += spi-atmel.o
- obj-$(CONFIG_SPI_ATH79)                       += spi-ath79.o
- obj-$(CONFIG_SPI_AU1550)              += spi-au1550.o
- obj-$(CONFIG_SPI_BCM63XX)             += spi-bcm63xx.o
-+obj-$(CONFIG_SPI_BCM63XX_HSSPI)               += spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN5XX)             += spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_SPORT)          += spi-bfin-sport.o
- obj-$(CONFIG_SPI_BITBANG)             += spi-bitbang.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm63xx-hsspi.c
-@@ -0,0 +1,427 @@
-+/*
-+ * Broadcom BCM63XX High Speed SPI Controller driver
-+ *
-+ * Copyright 2000-2010 Broadcom Corporation
-+ * Copyright 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_hsspi.h>
-+
-+#define HSSPI_OP_CODE_SHIFT   13
-+#define HSSPI_OP_SLEEP                (0 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ_WRITE   (1 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_WRITE                (2 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ         (3 << HSSPI_OP_CODE_SHIFT)
-+
-+#define HSSPI_MAX_PREPEND_LEN 15
-+
-+#define HSSPI_MAX_SYNC_CLOCK  30000000
-+
-+struct bcm63xx_hsspi {
-+      struct completion       done;
-+      struct spi_transfer     *curr_trans;
-+
-+      struct platform_device  *pdev;
-+      struct clk              *clk;
-+      void __iomem            *regs;
-+      u8 __iomem              *fifo;
-+
-+      u32                     speed_hz;
-+      int                     irq;
-+};
-+
-+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, int hz,
-+                                int profile)
-+{
-+      u32 reg;
-+
-+      reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
-+      bcm_hsspi_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg,
-+                       HSSPI_PROFILE_CLK_CTRL_REG(profile));
-+
-+      reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+      if (hz > HSSPI_MAX_SYNC_CLOCK)
-+              reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+      else
-+              reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+      bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+}
-+
-+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi,
-+                               struct spi_transfer *t1,
-+                               struct spi_transfer *t2)
-+{
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+      u8 chip_select = spi->chip_select;
-+      u16 opcode = 0;
-+      int len, prepend_size = 0;
-+
-+      init_completion(&bs->done);
-+
-+      bs->curr_trans = t2 ? t2 : t1;
-+      bcm63xx_hsspi_set_clk(bs, bs->curr_trans->speed_hz, chip_select);
-+
-+      if (t2 && !t2->tx_buf)
-+              prepend_size = t1->len;
-+
-+      bcm_hsspi_writel(prepend_size << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
-+                       2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
-+                       2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
-+                       HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
-+
-+      if (t1->rx_buf && t1->tx_buf)
-+              opcode = HSSPI_OP_READ_WRITE;
-+      else if (t1->rx_buf || (t2 && t2->rx_buf))
-+              opcode = HSSPI_OP_READ;
-+      else if (t1->tx_buf)
-+              opcode = HSSPI_OP_WRITE;
-+
-+      if (opcode == HSSPI_OP_READ && t2)
-+              len = t2->len;
-+      else
-+              len = t1->len;
-+
-+      if (t1->tx_buf) {
-+              memcpy_toio(bs->fifo + 2, t1->tx_buf, t1->len);
-+              if (t2 && t2->tx_buf) {
-+                      memcpy_toio(bs->fifo + 2 + t1->len,
-+                                  t2->tx_buf, t2->len);
-+                      len += t2->len;
-+              }
-+      }
-+
-+      opcode |= len;
-+      memcpy_toio(bs->fifo, &opcode, sizeof(opcode));
-+
-+      /* enable interrupt */
-+      bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
-+
-+      /* start the transfer */
-+      bcm_hsspi_writel(chip_select << PINGPONG_CMD_SS_SHIFT |
-+                       chip_select << PINGPONG_CMD_PROFILE_SHIFT |
-+                       PINGPONG_COMMAND_START_NOW,
-+                       HSSPI_PINGPONG_COMMAND_REG(0));
-+
-+      if (wait_for_completion_timeout(&bs->done, HZ) == 0) {
-+              dev_err(&bs->pdev->dev, "transfer timed out!\n");
-+              return -ETIMEDOUT;
-+      }
-+
-+      return t1->len + (t2 ? t2->len : 0);
-+}
-+
-+static int bcm63xx_hsspi_setup(struct spi_device *spi)
-+{
-+      u32 reg;
-+
-+      if (spi->bits_per_word != 8)
-+              return -EINVAL;
-+
-+      if (spi->max_speed_hz == 0)
-+              return -EINVAL;
-+
-+      reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+      reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
-+      if (spi->mode & SPI_CPHA)
-+              reg |= SIGNAL_CTRL_LAUNCH_RISING;
-+      else
-+              reg |= SIGNAL_CTRL_LATCH_RISING;
-+      bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
-+                                    struct spi_message *msg)
-+{
-+      struct spi_transfer *t, *prev = NULL;
-+      struct spi_device *spi = msg->spi;
-+      u32 reg;
-+      int ret = -EINVAL;
-+      int len = 0;
-+
-+      /* check if we are able to make these transfers */
-+      list_for_each_entry(t, &msg->transfers, transfer_list) {
-+              if (!t->tx_buf && !t->rx_buf)
-+                      goto out;
-+
-+              if (t->speed_hz == 0)
-+                      t->speed_hz = spi->max_speed_hz;
-+
-+              if (t->speed_hz > spi->max_speed_hz)
-+                      goto out;
-+
-+              if (t->len > HSSPI_BUFFER_LEN)
-+                      goto out;
-+
-+              /*
-+               * This controller does not support keeping the chip select
-+               * active between transfers.
-+               * This logic currently supports combining:
-+               *  write then read with no cs_change (e.g. m25p80 RDSR)
-+               *  write then write with no cs_change (e.g. m25p80 PP)
-+               */
-+              if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
-+                      /*
-+                       * reject if we have to combine two tx transfers and
-+                       * their combined length is bigger than the buffer
-+                       */
-+                      if (prev->tx_buf && t->tx_buf &&
-+                          (prev->len + t->len) > HSSPI_BUFFER_LEN)
-+                              goto out;
-+                      /*
-+                       * reject if we need write more than 15 bytes in read
-+                       * then write.
-+                       */
-+                      if (prev->tx_buf && t->rx_buf &&
-+                          prev->len > HSSPI_MAX_PREPEND_LEN)
-+                              goto out;
-+              }
-+
-+      }
-+
-+      /* setup clock polarity */
-+      reg = bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG);
-+      reg &= ~GLOBAL_CTRL_CLK_POLARITY;
-+      if (spi->mode & SPI_CPOL)
-+              reg |= GLOBAL_CTRL_CLK_POLARITY;
-+      bcm_hsspi_writel(reg, HSSPI_GLOBAL_CTRL_REG);
-+
-+      list_for_each_entry(t, &msg->transfers, transfer_list) {
-+              if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
-+                      /* combine write with following transfer */
-+                      ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, t);
-+                      if (ret < 0)
-+                              goto out;
-+
-+                      len += ret;
-+                      prev = NULL;
-+                      continue;
-+              }
-+
-+              /* write the previous pending transfer */
-+              if (prev != NULL) {
-+                      ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
-+                      if (ret < 0)
-+                              goto out;
-+
-+                      len += ret;
-+              }
-+
-+              prev = t;
-+      }
-+
-+      /* do last pending transfer */
-+      if (prev != NULL) {
-+              ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
-+              if (ret < 0)
-+                      goto out;
-+              len += ret;
-+      }
-+
-+      msg->actual_length = len;
-+      ret = 0;
-+out:
-+      msg->status = ret;
-+      spi_finalize_current_message(master);
-+      return 0;
-+}
-+
-+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
-+{
-+      struct spi_master *master = (struct spi_master *)dev_id;
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      if (bcm_hsspi_readl(HSSPI_INT_STATUS_MASKED_REG) == 0)
-+              return IRQ_NONE;
-+
-+      bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
-+      bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+
-+      if (bs->curr_trans && bs->curr_trans->rx_buf)
-+              memcpy_fromio(bs->curr_trans->rx_buf,  bs->fifo,
-+                            bs->curr_trans->len);
-+      complete(&bs->done);
-+
-+      return IRQ_HANDLED;
-+}
-+
-+static int bcm63xx_hsspi_probe(struct platform_device *pdev)
-+{
-+
-+      struct spi_master *master;
-+      struct bcm63xx_hsspi *bs;
-+      struct resource *res_mem;
-+      void __iomem *regs;
-+      struct device *dev = &pdev->dev;
-+      struct bcm63xx_hsspi_pdata *pdata = pdev->dev.platform_data;
-+      struct clk *clk;
-+      int irq;
-+      int ret;
-+
-+      irq = platform_get_irq(pdev, 0);
-+      if (irq < 0) {
-+              dev_err(dev, "no irq\n");
-+              return -ENXIO;
-+      }
-+
-+      res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+      regs = devm_request_and_ioremap(dev, res_mem);
-+      if (!regs) {
-+              dev_err(dev, "unable to ioremap regs\n");
-+              return -ENXIO;
-+      }
-+
-+      clk = clk_get(dev, "hsspi");
-+
-+      if (IS_ERR(clk)) {
-+              ret = PTR_ERR(clk);
-+              goto out_release;
-+      }
-+
-+      clk_prepare_enable(clk);
-+
-+      master = spi_alloc_master(&pdev->dev, sizeof(*bs));
-+      if (!master) {
-+              ret = -ENOMEM;
-+              goto out_disable_clk;
-+      }
-+
-+      bs = spi_master_get_devdata(master);
-+      bs->pdev = pdev;
-+      bs->clk = clk;
-+      bs->regs = regs;
-+
-+      master->bus_num = pdata->bus_num;
-+      master->num_chipselect = 8;
-+      master->setup = bcm63xx_hsspi_setup;
-+      master->transfer_one_message = bcm63xx_hsspi_transfer_one;
-+      master->mode_bits = SPI_CPOL | SPI_CPHA;
-+
-+      bs->speed_hz = pdata->speed_hz;
-+      bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
-+
-+      platform_set_drvdata(pdev, master);
-+
-+      bs->curr_trans = NULL;
-+
-+      /* Initialize the hardware */
-+      bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+
-+      /* clean up any pending interrupts */
-+      bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
-+
-+      bcm_hsspi_writel(bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG) |
-+                       GLOBAL_CTRL_CLK_GATE_SSOFF,
-+                       HSSPI_GLOBAL_CTRL_REG);
-+
-+      ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED,
-+                             pdev->name, master);
-+
-+      if (ret)
-+              goto out_put_master;
-+
-+      /* register and we are done */
-+      ret = spi_register_master(master);
-+      if (ret)
-+              goto out_free_irq;
-+
-+      return 0;
-+
-+out_free_irq:
-+      devm_free_irq(dev, bs->irq, master);
-+out_put_master:
-+      spi_master_put(master);
-+out_disable_clk:
-+      clk_disable_unprepare(clk);
-+      clk_put(clk);
-+out_release:
-+      devm_ioremap_release(dev, regs);
-+
-+      return ret;
-+}
-+
-+
-+static int __exit bcm63xx_hsspi_remove(struct platform_device *pdev)
-+{
-+      struct spi_master *master = platform_get_drvdata(pdev);
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      spi_unregister_master(master);
-+
-+      /* reset the hardware and block queue progress */
-+      bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+      clk_disable_unprepare(bs->clk);
-+      clk_put(bs->clk);
-+
-+      return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_hsspi_suspend(struct platform_device *pdev,
-+                               pm_message_t mesg)
-+{
-+      struct spi_master *master = platform_get_drvdata(pdev);
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      spi_master_suspend(master);
-+      clk_disable(bs->clk);
-+
-+      return 0;
-+}
-+
-+static int bcm63xx_hsspi_resume(struct platform_device *pdev)
-+{
-+      struct spi_master *master = platform_get_drvdata(pdev);
-+      struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+      clk_enable(bs->clk);
-+      spi_master_resume(master);
-+
-+      return 0;
-+}
-+
-+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
-+      .suspend        = bcm63xx_hsspi_suspend,
-+      .resume         = bcm63xx_hsspi_resume,
-+};
-+
-+#define BCM63XX_HSSPI_PM_OPS  (&bcm63xx_hsspi_pm_ops)
-+#else
-+#define BCM63XX_HSSPI_PM_OPS  NULL
-+#endif
-+
-+
-+
-+static struct platform_driver bcm63xx_hsspi_driver = {
-+      .driver = {
-+              .name   = "bcm63xx-hsspi",
-+              .owner  = THIS_MODULE,
-+              .pm     = BCM63XX_HSSPI_PM_OPS,
-+      },
-+      .probe          = bcm63xx_hsspi_probe,
-+      .remove         = __exit_p(bcm63xx_hsspi_remove),
-+};
-+
-+module_platform_driver(bcm63xx_hsspi_driver);
-+
-+MODULE_ALIAS("platform:bcm63xx_hsspi");
-+MODULE_DESCRIPTION("Broadcom BCM63xx HS SPI Controller driver");
-+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.8/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.8/411-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644 (file)
index c82c409..0000000
+++ /dev/null
@@ -1,104 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c                     |   33 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h |    2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,9 +16,12 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-@@ -55,6 +58,21 @@ static struct platform_device mtd_dev =
-       },
- };
-+static struct flash_platform_data bcm63xx_flash_data = {
-+      .part_probe_types       = bcm63xx_part_types,
-+};
-+
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+      {
-+              .bus_num        = 0,
-+              .chip_select    = 0,
-+              .mode           = 0,
-+              .max_speed_hz   = 781000,
-+              .modalias       = "m25p80",
-+              .platform_data  = &bcm63xx_flash_data,
-+      },
-+};
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
-       u32 val;
-@@ -62,6 +80,11 @@ static int __init bcm63xx_detect_flash_t
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+              if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+              else
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-                       return BCM63XX_FLASH_TYPE_SERIAL;
-               else
-@@ -85,6 +108,9 @@ static int __init bcm63xx_detect_flash_t
-                       return BCM63XX_FLASH_TYPE_NAND;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+              if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+                      bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-               case STRAPBUS_6368_BOOT_SEL_NAND:
-                       return BCM63XX_FLASH_TYPE_NAND;
-@@ -116,8 +142,13 @@ int __init bcm63xx_flash_register(void)
-               return platform_device_register(&mtd_dev);
-       case BCM63XX_FLASH_TYPE_SERIAL:
--              pr_warn("unsupported serial flash detected\n");
--              return -ENODEV;
-+              if (BCMCPU_IS_6328() || BCMCPU_IS_6362()) {
-+                      bcm63xx_spi_flash_info[0].bus_num = 1;
-+                      bcm63xx_flash_data.max_transfer_len = HSSPI_BUFFER_LEN;
-+              }
-+
-+              return spi_register_board_info(bcm63xx_spi_flash_info,
-+                                      ARRAY_SIZE(bcm63xx_spi_flash_info));
-       case BCM63XX_FLASH_TYPE_NAND:
-               pr_warn("unsupported NAND flash detected\n");
-               return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -629,6 +629,7 @@
- #define GPIO_STRAPBUS_REG             0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL       (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST    (1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK   0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND   0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1443,6 +1444,7 @@
- #define STRAPBUS_6362_BOOT_SEL_NAND   (0 << 15)
- #define MISC_STRAPBUS_6328_REG                0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST  (1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT      7
- #define STRAPBUS_6328_FCVO_MASK               (0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/brcm63xx/patches-3.8/412-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.8/412-MTD-physmap-allow-passing-pp_data.patch
deleted file mode 100644 (file)
index de2216a..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-From 266c506f4b262bd6aba0776a03d82c98e65d9906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:32:36 +0200
-Subject: [PATCH 63/79] MTD: physmap: allow passing pp_data
-
----
- drivers/mtd/maps/physmap.c  |    4 +++-
- include/linux/mtd/physmap.h |    1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -100,6 +100,7 @@ static int physmap_flash_probe(struct pl
- {
-       struct physmap_flash_data *physmap_data;
-       struct physmap_flash_info *info;
-+      struct mtd_part_parser_data *pp_data;
-       const char **probe_type;
-       const char **part_types;
-       int err = 0;
-@@ -191,8 +192,9 @@ static int physmap_flash_probe(struct pl
-       spin_lock_init(&info->vpp_lock);
-       part_types = physmap_data->part_probe_types ? : part_probe_types;
-+      pp_data = physmap_data->pp_data ? physmap_data->pp_data : NULL;
--      mtd_device_parse_register(info->cmtd, part_types, NULL,
-+      mtd_device_parse_register(info->cmtd, part_types, pp_data,
-                                 physmap_data->parts, physmap_data->nr_parts);
-       return 0;
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -32,6 +32,7 @@ struct physmap_flash_data {
-       char                    *probe_type;
-       struct mtd_partition    *parts;
-       const char              **part_probe_types;
-+      struct mtd_part_parser_data *pp_data;
- };
- #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/target/linux/brcm63xx/patches-3.8/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.8/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644 (file)
index 06d0b1b..0000000
+++ /dev/null
@@ -1,81 +0,0 @@
-From 8879e209111192c5e9752d7bd203cf7582693328 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c           |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h |   10 ++++++++++
- 2 files changed, 18 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -33,6 +33,7 @@
- #include <bcm63xx_dev_usb_ohci.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
-+#include <pci_ath9k_fixup.h>
- #include <uapi/linux/bcm963xx_tag.h>
-@@ -907,6 +908,7 @@ int __init board_register_devices(void)
- {
-       int button_count = 0;
-       int led_count = 0;
-+      int i;
-       if (board.has_uart0)
-               bcm63xx_uart_register(0);
-@@ -945,7 +947,8 @@ int __init board_register_devices(void)
-        * do this after registering enet devices
-        */
- #ifdef CONFIG_SSB_PCIHOST
--      if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+      if (!board.has_caldata &&
-+          !bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-               memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
-               if (ssb_arch_register_fallback_sprom(
-@@ -987,5 +990,9 @@ int __init board_register_devices(void)
-               platform_device_register(&bcm63xx_gpio_keys_device);
-       }
-+      /* register any fixups */
-+      for (i = 0; i < board.has_caldata; i++)
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
-       return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -8,6 +8,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
-+#include <pci_ath9k_fixup.h>
- /*
-  * flash mapping
-@@ -15,6 +16,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
-+struct ath9k_caldata {
-+      unsigned int    slot;
-+      u32             caldata_offset;
-+};
-+
- /*
-  * board definition
-  */
-@@ -34,6 +40,10 @@ struct board_info {
-       unsigned int    has_dsp:1;
-       unsigned int    has_uart0:1;
-       unsigned int    has_uart1:1;
-+      unsigned int    has_caldata:2;
-+
-+      /* wifi calibration data config */
-+      struct ath9k_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.8/414-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.8/414-MTD-m25p80-allow-passing-pp_data.patch
deleted file mode 100644 (file)
index 347fada..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7f17dfe9009beb07a3de0e380932a725293829df Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:33:03 +0200
-Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
-
----
- drivers/mtd/devices/m25p80.c |    3 +++
- include/linux/spi/flash.h    |    2 ++
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -878,6 +878,9 @@ static int m25p_probe(struct spi_device
-                       dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
-       }
-+      if (data && data->pp_data)
-+              memcpy(&ppdata, data->pp_data, sizeof(ppdata));
-+
-       info = (void *)id->driver_data;
-       if (info->jedec_id) {
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -12,6 +12,7 @@ struct mtd_part_parser_data;
-  *    with chips that can't be queried for JEDEC or other IDs
-  * @part_probe_types: optional list of MTD parser names to use for
-  *    partitioning
-+ * @pp_data: optional partition parser data.
-  *
-  * @max_transfer_len: option maximum read/write length limitation for
-  *    SPI controllers not able to transfer any length commands.
-@@ -30,6 +31,7 @@ struct flash_platform_data {
-       char            *type;
-       const char      **part_probe_types;
-+      struct mtd_part_parser_data *pp_data;
-       unsigned int    max_transfer_len;
-       /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/brcm63xx/patches-3.8/415-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch b/target/linux/brcm63xx/patches-3.8/415-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
deleted file mode 100644 (file)
index 0b407c4..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-From f888824d352df894ab721a5ca067b0313500efe7 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 12:17:54 +0200
-Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
-
----
- arch/mips/bcm63xx/dev-flash.c                      |   36 +++++++++++++------
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +
- 2 files changed, 26 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -25,6 +25,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+int bcm63xx_attached_flash = -1;
-+
- static struct mtd_partition mtd_partitions[] = {
-       {
-               .name           = "cfe",
-@@ -86,26 +88,30 @@ static int __init bcm63xx_detect_flash_t
-                       bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-               if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
--                      return BCM63XX_FLASH_TYPE_SERIAL;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
-               else
--                      return BCM63XX_FLASH_TYPE_NAND;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
-+              break;
-       case BCM6338_CPU_ID:
-       case BCM6345_CPU_ID:
-       case BCM6348_CPU_ID:
-               /* no way to auto detect so assume parallel */
--              return BCM63XX_FLASH_TYPE_PARALLEL;
-+              bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
-+              break;
-       case BCM6358_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-               if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
--                      return BCM63XX_FLASH_TYPE_PARALLEL;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
-               else
--                      return BCM63XX_FLASH_TYPE_SERIAL;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
-+              break;
-       case BCM6362_CPU_ID:
-               val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-               if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
--                      return BCM63XX_FLASH_TYPE_SERIAL;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
-               else
--                      return BCM63XX_FLASH_TYPE_NAND;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
-+              break;
-       case BCM6368_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-               if (val & STRAPBUS_6368_SPI_CLK_FAST)
-@@ -113,25 +119,32 @@ static int __init bcm63xx_detect_flash_t
-               switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-               case STRAPBUS_6368_BOOT_SEL_NAND:
--                      return BCM63XX_FLASH_TYPE_NAND;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
-+                      break;
-               case STRAPBUS_6368_BOOT_SEL_SERIAL:
--                      return BCM63XX_FLASH_TYPE_SERIAL;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
-+                      break;
-               case STRAPBUS_6368_BOOT_SEL_PARALLEL:
--                      return BCM63XX_FLASH_TYPE_PARALLEL;
-+                      bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
-+                      break;
-+              default:
-+                      return -EINVAL;
-               }
-       default:
-               return -EINVAL;
-       }
-+
-+      return 0;
- }
- int __init bcm63xx_flash_register(void)
- {
--      int flash_type;
-       u32 val;
--      flash_type = bcm63xx_detect_flash_type();
--      switch (flash_type) {
-+      bcm63xx_detect_flash_type();
-+
-+      switch (bcm63xx_attached_flash) {
-       case BCM63XX_FLASH_TYPE_PARALLEL:
-               /* read base address of boot chip select (0) */
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-@@ -154,7 +167,7 @@ int __init bcm63xx_flash_register(void)
-               return -ENODEV;
-       default:
-               pr_err("flash detection failed for BCM%x: %d\n",
--                     bcm63xx_get_cpu_id(), flash_type);
-+                     bcm63xx_get_cpu_id(), bcm63xx_attached_flash);
-               return -ENODEV;
-       }
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -7,6 +7,8 @@ enum {
-       BCM63XX_FLASH_TYPE_NAND,
- };
-+extern int bcm63xx_attached_flash;
-+
- int __init bcm63xx_flash_register(void);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.8/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.8/416-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644 (file)
index 8e2feb8..0000000
+++ /dev/null
@@ -1,227 +0,0 @@
-From bbebbf735a02b6d044ed928978ab4bd5f1833364 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 61/72] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile                         |    3 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c                |  190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h     |    7 +
- 3 files changed, 199 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-hsspi.o dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o \
-                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--                 usb-common.o
-+                 pci-ath9k-fixup.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,190 @@
-+/*
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Atheros AP94 reference board PCI initialization
-+ *
-+ *  Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <pci_ath9k_fixup.h>
-+
-+struct ath9k_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+      {
-+              .slot = 255,
-+              .pdata = {
-+                      .led_pin        = -1,
-+              },
-+      },
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+      u32 addr;
-+
-+      if (BCMCPU_IS_6328()) {
-+              addr = 0x18000000;
-+      } else {
-+              addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+              addr &= MPI_CSBASE_BASE_MASK;
-+      }
-+
-+      switch (bcm63xx_attached_flash) {
-+      case BCM63XX_FLASH_TYPE_PARALLEL:
-+              memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+              return eeprom;
-+      case BCM63XX_FLASH_TYPE_SERIAL:
-+              /* the first megabyte is memory mapped */
-+              if (offset < 0x100000) {
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      return eeprom;
-+              }
-+
-+              if (BCMCPU_IS_6328()) {
-+                      /* we can change the memory mapped megabyte */
-+                      bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+                      memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+                      bcm_hsspi_writel(0, 0x18);
-+                      return eeprom;
-+              }
-+              /* can't do anything here without talking to the SPI controller. */
-+      case BCM63XX_FLASH_TYPE_NAND:
-+      default:
-+              return NULL;
-+      }
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+      void __iomem *mem;
-+      struct ath9k_platform_data *pdata = NULL;
-+      u16 *cal_data = NULL;
-+      u16 cmd;
-+      u32 bar0;
-+      u32 val;
-+      unsigned i;
-+
-+      for (i = 0; i < ath9k_num_fixups; i++) {
-+              if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+              pdata = &ath9k_fixups[i].pdata;
-+              break;
-+      }
-+
-+      if (cal_data == NULL)
-+              return;
-+
-+      if (*cal_data != 0xa55a) {
-+              pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+      switch (bcm63xx_get_cpu_id()) {
-+      case BCM6328_CPU_ID:
-+              val = BCM_PCIE_MEM_BASE_PA;
-+              break;
-+      case BCM6348_CPU_ID:
-+      case BCM6358_CPU_ID:
-+      case BCM6368_CPU_ID:
-+              val = BCM_PCI_MEM_BASE_PA;
-+              break;
-+      default:
-+              BUG();
-+      }
-+
-+      mem = ioremap(val, 0x10000);
-+      if (!mem) {
-+              pr_err("pci %s: ioremap error\n", pci_name(dev));
-+              return;
-+      }
-+
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      /* set offset to first reg address */
-+      cal_data += 3;
-+      while(*cal_data != 0xffff) {
-+              u32 reg;
-+              reg = *cal_data++;
-+              val = *cal_data++;
-+              val |= (*cal_data++) << 16;
-+
-+              writel(val, mem + reg);
-+              udelay(100);
-+      }
-+
-+      pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+      dev->vendor = val & 0xffff;
-+      dev->device = (val >> 16) & 0xffff;
-+
-+      pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+      dev->revision = val & 0xff;
-+      dev->class = val >> 8; /* upper 3 bytes */
-+
-+      pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+      cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+      pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+      pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+      iounmap(mem);
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+      if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+      if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+              return;
-+
-+      if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+              return;
-+
-+      ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+      ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.8/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.8/417-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
deleted file mode 100644 (file)
index 5ce8223..0000000
+++ /dev/null
@@ -1,120 +0,0 @@
-Allow bcm63xxpart to receive a caldata offset if calibration data is
-contained in flash.
----
- drivers/mtd/bcm63xxpart.c      |   51 ++++++++++++++++++++++++++++++++++++---
- include/linux/mtd/partitions.h |    2 +
- 2 files changed, 49 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -53,10 +53,12 @@ static int bcm63xx_parse_cfe_partitions(
-       struct mtd_partition *parts;
-       int ret;
-       size_t retlen;
--      unsigned int rootfsaddr, kerneladdr, spareaddr;
-+      unsigned int rootfsaddr, kerneladdr, spareaddr, nvramaddr;
-       unsigned int rootfslen, kernellen, sparelen, totallen;
-       unsigned int cfelen, nvramlen;
-       unsigned int cfe_erasesize;
-+      unsigned int caldatalen1 = 0, caldataaddr1 = 0;
-+      unsigned int caldatalen2 = 0, caldataaddr2 = 0;
-       int i;
-       u32 computed_crc;
-       bool rootfs_first = false;
-@@ -70,6 +72,24 @@ static int bcm63xx_parse_cfe_partitions(
-       cfelen = cfe_erasesize;
-       nvramlen = bcm63xx_nvram_get_psi_size();
-       nvramlen = roundup(nvramlen, cfe_erasesize);
-+      nvramaddr = master->size - nvramlen;
-+
-+      if (data) {
-+              if (data->caldata[0]) {
-+                      caldatalen1 = cfe_erasesize;
-+                      caldataaddr1 = rounddown(data->caldata[0],
-+                                               cfe_erasesize);
-+              }
-+              if (data->caldata[1]) {
-+                      caldatalen2 = cfe_erasesize;
-+                      caldataaddr2 = rounddown(data->caldata[1],
-+                                               cfe_erasesize);
-+              }
-+              if (caldataaddr1 == caldataaddr2) {
-+                      caldataaddr2 = 0;
-+                      caldatalen2 = 0;
-+              }
-+      }
-       /* Allocate memory for buffer */
-       buf = vmalloc(sizeof(struct bcm_tag));
-@@ -121,7 +141,7 @@ static int bcm63xx_parse_cfe_partitions(
-               rootfsaddr = 0;
-               spareaddr = cfelen;
-       }
--      sparelen = master->size - spareaddr - nvramlen;
-+      sparelen = min_not_zero(nvramaddr, caldataaddr1) - spareaddr;
-       /* Determine number of partitions */
-       if (rootfslen > 0)
-@@ -130,6 +150,12 @@ static int bcm63xx_parse_cfe_partitions(
-       if (kernellen > 0)
-               nrparts++;
-+      if (caldatalen1 > 0)
-+              nrparts++;
-+
-+      if (caldatalen2 > 0)
-+              nrparts++;
-+
-       /* Ask kernel for more memory */
-       parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
-       if (!parts) {
-@@ -167,15 +193,32 @@ static int bcm63xx_parse_cfe_partitions(
-               curpart++;
-       }
-+      if (caldatalen1 > 0) {
-+              if (caldatalen2 > 0)
-+                      parts[curpart].name = "cal_data1";
-+              else
-+                      parts[curpart].name = "cal_data";
-+              parts[curpart].offset = caldataaddr1;
-+              parts[curpart].size = caldatalen1;
-+              curpart++;
-+      }
-+
-+      if (caldatalen2 > 0) {
-+              parts[curpart].name = "cal_data2";
-+              parts[curpart].offset = caldataaddr2;
-+              parts[curpart].size = caldatalen2;
-+              curpart++;
-+      }
-+
-       parts[curpart].name = "nvram";
--      parts[curpart].offset = master->size - nvramlen;
-+      parts[curpart].offset = nvramaddr;
-       parts[curpart].size = nvramlen;
-       curpart++;
-       /* Global partition "linux" to make easy firmware upgrade */
-       parts[curpart].name = "linux";
-       parts[curpart].offset = cfelen;
--      parts[curpart].size = master->size - cfelen - nvramlen;
-+      parts[curpart].size = min_not_zero(nvramaddr, caldataaddr1) - cfelen;
-       for (i = 0; i < nrparts; i++)
-               pr_info("Partition %d is %s offset %llx and length %llx\n", i,
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -58,10 +58,12 @@ struct device_node;
- /**
-  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
-  * @origin: for RedBoot, start address of MTD device
-+ * @caldata: for CFE, start address of wifi calibration data
-  * @of_node: for OF parsers, device node containing partitioning information
-  */
- struct mtd_part_parser_data {
-       unsigned long origin;
-+      unsigned long caldata[2];
-       struct device_node *of_node;
- };
diff --git a/target/linux/brcm63xx/patches-3.8/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.8/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
deleted file mode 100644 (file)
index 590ce83..0000000
+++ /dev/null
@@ -1,82 +0,0 @@
-From 977f8a30103b9c4992cab8f49357fe0d4274004f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:55:26 +0200
-Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c              |    2 +-
- arch/mips/bcm63xx/dev-flash.c                          |    9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h |    4 +++-
- 3 files changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -966,7 +966,7 @@ int __init board_register_devices(void)
-       if (board.num_spis)
-               spi_register_board_info(board.spis, board.num_spis);
--      bcm63xx_flash_register();
-+      bcm63xx_flash_register(board.has_caldata, board.caldata);
-       /* count number of LEDs defined by this device */
-       while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,12 +35,15 @@ static struct mtd_partition mtd_partitio
-       }
- };
-+static struct mtd_part_parser_data bcm63xx_parser_data;
-+
- static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
- static struct physmap_flash_data flash_data = {
-       .width                  = 2,
-       .parts                  = mtd_partitions,
-       .part_probe_types       = bcm63xx_part_types,
-+      .pp_data                = &bcm63xx_parser_data,
- };
- static struct resource mtd_resources[] = {
-@@ -62,6 +65,7 @@ static struct platform_device mtd_dev =
- static struct flash_platform_data bcm63xx_flash_data = {
-       .part_probe_types       = bcm63xx_part_types,
-+      .pp_data                = &bcm63xx_parser_data,
- };
- static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -137,10 +141,13 @@ static int __init bcm63xx_detect_flash_t
-       return 0;
- }
--int __init bcm63xx_flash_register(void)
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
- {
-       u32 val;
-+      unsigned int i;
-+      for (i = 0; i < num_caldata; i++)
-+              bcm63xx_parser_data.caldata[i] = caldata[i].caldata_offset;
-       bcm63xx_detect_flash_type();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -1,6 +1,8 @@
- #ifndef __BCM63XX_FLASH_H
- #define __BCM63XX_FLASH_H
-+#include <board_bcm963xx.h>
-+
- enum {
-       BCM63XX_FLASH_TYPE_PARALLEL,
-       BCM63XX_FLASH_TYPE_SERIAL,
-@@ -9,6 +11,6 @@ enum {
- extern int bcm63xx_attached_flash;
--int __init bcm63xx_flash_register(void);
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.8/419-MIPS-BCM63XX-enable-enet-for-BCM6345.patch b/target/linux/brcm63xx/patches-3.8/419-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
deleted file mode 100644 (file)
index c0a319b..0000000
+++ /dev/null
@@ -1,805 +0,0 @@
-From 1b0b5d325d0cc50cade62afd6a9416fb3cd1e658 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:42:45 +0100
-Subject: [PATCH 69/72] 443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
-
----
- arch/mips/bcm63xx/dev-enet.c                       |   63 ++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h   |    3 +-
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h    |   88 +++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h  |   43 ++++-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c       |  199 ++++++++++++--------
- drivers/net/ethernet/broadcom/bcm63xx_enet.h       |   15 ++
- 6 files changed, 320 insertions(+), 91 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -9,10 +9,44 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/platform_device.h>
-+#include <linux/export.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-+#ifdef BCMCPU_RUNTIME_DETECT
-+static const unsigned long bcm6xxx_regs_enetdmac[] = {
-+      [ENETDMAC_CHANCFG]      = ENETDMAC_CHANCFG_REG,
-+      [ENETDMAC_IR]           = ENETDMAC_IR_REG,
-+      [ENETDMAC_IRMASK]       = ENETDMAC_IRMASK_REG,
-+      [ENETDMAC_MAXBURST]     = ENETDMAC_MAXBURST_REG,
-+};
-+
-+static const unsigned long bcm6345_regs_enetdmac[] = {
-+      [ENETDMAC_CHANCFG]      = ENETDMA_6345_CHANCFG_REG,
-+      [ENETDMAC_IR]           = ENETDMA_6345_IR_REG,
-+      [ENETDMAC_IRMASK]       = ENETDMA_6345_IRMASK_REG,
-+      [ENETDMAC_MAXBURST]     = ENETDMA_6345_MAXBURST_REG,
-+      [ENETDMAC_BUFALLOC]     = ENETDMA_6345_BUFALLOC_REG,
-+      [ENETDMAC_RSTART]       = ENETDMA_6345_RSTART_REG,
-+      [ENETDMAC_FC]           = ENETDMA_6345_FC_REG,
-+      [ENETDMAC_LEN]          = ENETDMA_6345_LEN_REG,
-+};
-+
-+const unsigned long *bcm63xx_regs_enetdmac;
-+EXPORT_SYMBOL(bcm63xx_regs_enetdmac);
-+
-+static __init void bcm63xx_enetdmac_regs_init(void)
-+{
-+      if (BCMCPU_IS_6345())
-+              bcm63xx_regs_enetdmac = bcm6345_regs_enetdmac;
-+      else
-+              bcm63xx_regs_enetdmac = bcm6xxx_regs_enetdmac;
-+}
-+#else
-+static __init void bcm63xx_enetdmac_regs_init(void) { }
-+#endif
-+
- static struct resource shared_res[] = {
-       {
-               .start          = -1, /* filled at runtime */
-@@ -137,12 +171,19 @@ static int __init register_shared(void)
-       if (shared_device_registered)
-               return 0;
-+      bcm63xx_enetdmac_regs_init();
-+
-       shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
-       shared_res[0].end = shared_res[0].start;
--      shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
-+      if (BCMCPU_IS_6345())
-+              shared_res[0].end += (RSET_6345_ENETDMA_SIZE) - 1;
-+      else
-+              shared_res[0].end += (RSET_ENETDMA_SIZE)  - 1;
-       if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               chan_count = 32;
-+      else if (BCMCPU_IS_6345())
-+              chan_count = 8;
-       else
-               chan_count = 16;
-@@ -172,7 +213,7 @@ int __init bcm63xx_enet_register(int uni
-       if (unit > 1)
-               return -ENODEV;
--      if (unit == 1 && BCMCPU_IS_6338())
-+      if (unit == 1 && (BCMCPU_IS_6338() || BCMCPU_IS_6345()))
-               return -ENODEV;
-       ret = register_shared();
-@@ -213,6 +254,20 @@ int __init bcm63xx_enet_register(int uni
-               dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY);
-       }
-+      dpd->dma_chan_en_mask = ENETDMAC_CHANCFG_EN_MASK;
-+      dpd->dma_chan_int_mask = ENETDMAC_IR_PKTDONE_MASK;
-+      if (BCMCPU_IS_6345()) {
-+              dpd->dma_chan_en_mask |= ENETDMAC_CHANCFG_CHAINING_MASK;
-+              dpd->dma_chan_en_mask |= ENETDMAC_CHANCFG_WRAP_EN_MASK;
-+              dpd->dma_chan_en_mask |= ENETDMAC_CHANCFG_FLOWC_EN_MASK;
-+              dpd->dma_chan_int_mask |= ENETDMA_IR_BUFDONE_MASK;
-+              dpd->dma_chan_int_mask |= ENETDMA_IR_NOTOWNER_MASK;
-+              dpd->dma_chan_width = ENETDMA_6345_CHAN_WIDTH;
-+              dpd->dma_no_sram = 1;
-+              dpd->dma_desc_shift = ENETDMA_6345_DESC_SHIFT;
-+      } else
-+              dpd->dma_chan_width = ENETDMA_CHAN_WIDTH;
-+
-       ret = platform_device_register(pdev);
-       if (ret)
-               return ret;
-@@ -246,6 +301,10 @@ bcm63xx_enetsw_register(const struct bcm
-       else if (BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+      enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
-+      enetsw_pd.dma_chan_en_mask = ENETDMAC_CHANCFG_EN_MASK;
-+      enetsw_pd.dma_chan_int_mask = ENETDMAC_IR_PKTDONE_MASK;
-+
-       ret = platform_device_register(&bcm63xx_enetsw_device);
-       if (ret)
-               return ret;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -175,6 +175,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RSET_SPI_SIZE                1804
- #define RSET_ENET_SIZE                        2048
- #define RSET_ENETDMA_SIZE             256
-+#define RSET_6345_ENETDMA_SIZE                64
- #define RSET_ENETDMAC_SIZE(chans)     (16 * (chans))
- #define RSET_ENETDMAS_SIZE(chans)     (16 * (chans))
- #define RSET_ENETSW_SIZE              65536
-@@ -305,7 +306,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_USBDMA_BASE          (0xfffe2800)
- #define BCM_6345_ENET0_BASE           (0xfffe1800)
- #define BCM_6345_ENETDMA_BASE         (0xfffe2800)
--#define BCM_6345_ENETDMAC_BASE                (0xfffe2900)
-+#define BCM_6345_ENETDMAC_BASE                (0xfffe2840)
- #define BCM_6345_ENETDMAS_BASE                (0xfffe2a00)
- #define BCM_6345_ENETSW_BASE          (0xdeadbeef)
- #define BCM_6345_PCMCIA_BASE          (0xfffe2028)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -4,6 +4,8 @@
- #include <linux/if_ether.h>
- #include <linux/init.h>
-+#include <bcm63xx_regs.h>
-+
- /*
-  * on board ethernet platform data
-  */
-@@ -37,6 +39,21 @@ struct bcm63xx_enet_platform_data {
-                                         int phy_id, int reg),
-                         void (*mii_write)(struct net_device *dev,
-                                           int phy_id, int reg, int val));
-+
-+      /* DMA channel enable mask */
-+      u32 dma_chan_en_mask;
-+
-+      /* DMA channel interrupt mask */
-+      u32 dma_chan_int_mask;
-+
-+      /* Set to one if DMA engine has *no* SRAM */
-+      unsigned int dma_no_sram;
-+
-+      /* DMA channel register width */
-+      unsigned int dma_chan_width;
-+
-+      /* DMA descriptor shift */
-+      unsigned int dma_desc_shift;
- };
- /*
-@@ -63,6 +80,15 @@ struct bcm63xx_enetsw_platform_data {
-       char mac_addr[ETH_ALEN];
-       int num_ports;
-       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-+
-+      /* DMA channel enable mask */
-+      u32 dma_chan_en_mask;
-+
-+      /* DMA channel interrupt mask */
-+      u32 dma_chan_int_mask;
-+
-+      /* DMA channel register width */
-+      unsigned int dma_chan_width;
- };
- int __init bcm63xx_enet_register(int unit,
-@@ -70,4 +96,69 @@ int __init bcm63xx_enet_register(int uni
- int bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
-+enum bcm63xx_regs_enetdmac {
-+      ENETDMAC_CHANCFG,
-+      ENETDMAC_IR,
-+      ENETDMAC_IRMASK,
-+      ENETDMAC_MAXBURST,
-+      ENETDMAC_BUFALLOC,
-+      ENETDMAC_RSTART,
-+      ENETDMAC_FC,
-+      ENETDMAC_LEN,
-+};
-+
-+static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
-+{
-+#ifdef BCMCPU_RUNTIME_DETECT
-+      extern const unsigned long *bcm63xx_regs_enetdmac;
-+
-+      return bcm63xx_regs_enetdmac[reg];
-+#else
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+      switch (reg) {
-+      case ENETDMAC_CHANCFG:
-+              return ENETDMA_6345_CHANCFG_REG;
-+      case ENETDMAC_IR:
-+              return ENETDMA_6345_IR_REG;
-+      case ENETDMAC_IRMASK:
-+              return ENETDMA_6345_IRMASK_REG;
-+      case ENETDMAC_MAXBURST:
-+              return ENETDMA_6345_MAXBURST_REG;
-+      case ENETDMAC_BUFALLOC:
-+              return ENETDMA_6345_BUFALLOC_REG;
-+      case ENETDMAC_RSTART:
-+              return ENETDMA_6345_RSTART_REG;
-+      case ENETDMAC_FC:
-+              return ENETDMA_6345_FC_REG;
-+      case ENETDMAC_LEN:
-+              return ENETDMA_6345_LEN_REG;
-+      }
-+#endif
-+#if defined(CONFIG_BCM63XX_CPU_6328) || \
-+      defined(CONFIG_BCM63XX_CPU_6338) || \
-+      defined(CONFIG_BCM63XX_CPU_6348) || \
-+      defined(CONFIG_BCM63XX_CPU_6358) || \
-+      defined(CONFIG_BCM63XX_CPU_6362) || \
-+      defined(CONFIG_BCM63XX_CPU_6368)
-+      switch (reg) {
-+      case ENETDMAC_CHANCFG:
-+              return ENETDMAC_CHANCFG_REG;
-+      case ENETDMAC_IR:
-+              return ENETDMAC_IR_REG;
-+      case ENETDMAC_IRMASK:
-+              return ENETDMAC_IRMASK_REG;
-+      case ENETDMAC_MAXBURST:
-+              return ENETDMAC_MAXBURST_REG;
-+      case ENETDMAC_BUFALLOC:
-+      case ENETDMAC_RSTART:
-+      case ENETDMAC_FC:
-+      case ENETDMAC_LEN:
-+              return 0;
-+      }
-+#endif
-+#endif
-+      return 0;
-+}
-+
-+
- #endif /* ! BCM63XX_DEV_ENET_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -730,6 +730,8 @@
- /*************************************************************************
-  * _REG relative to RSET_ENETDMA
-  *************************************************************************/
-+#define ENETDMA_CHAN_WIDTH            0x10
-+#define ENETDMA_6345_CHAN_WIDTH               0x40
- /* Controller Configuration Register */
- #define ENETDMA_CFG_REG                       (0x0)
-@@ -785,31 +787,56 @@
- /* State Ram Word 4 */
- #define ENETDMA_SRAM4_REG(x)          (0x20c + (x) * 0x10)
-+/* Broadcom 6345 ENET DMA definitions */
-+#define ENETDMA_6345_CHANCFG_REG      (0x00)
-+
-+#define ENETDMA_6345_MAXBURST_REG     (0x40)
-+
-+#define ENETDMA_6345_RSTART_REG               (0x08)
-+
-+#define ENETDMA_6345_LEN_REG          (0x0C)
-+
-+#define ENETDMA_6345_IR_REG           (0x14)
-+
-+#define ENETDMA_6345_IRMASK_REG               (0x18)
-+
-+#define ENETDMA_6345_FC_REG           (0x1C)
-+
-+#define ENETDMA_6345_BUFALLOC_REG     (0x20)
-+
-+/* Shift down for EOP, SOP and WRAP bits */
-+#define ENETDMA_6345_DESC_SHIFT               (3)
- /*************************************************************************
-  * _REG relative to RSET_ENETDMAC
-  *************************************************************************/
- /* Channel Configuration register */
--#define ENETDMAC_CHANCFG_REG(x)               ((x) * 0x10)
-+#define ENETDMAC_CHANCFG_REG          (0x0)
- #define ENETDMAC_CHANCFG_EN_SHIFT     0
- #define ENETDMAC_CHANCFG_EN_MASK      (1 << ENETDMAC_CHANCFG_EN_SHIFT)
- #define ENETDMAC_CHANCFG_PKTHALT_SHIFT        1
- #define ENETDMAC_CHANCFG_PKTHALT_MASK (1 << ENETDMAC_CHANCFG_PKTHALT_SHIFT)
- #define ENETDMAC_CHANCFG_BUFHALT_SHIFT        2
- #define ENETDMAC_CHANCFG_BUFHALT_MASK (1 << ENETDMAC_CHANCFG_BUFHALT_SHIFT)
-+#define ENETDMAC_CHANCFG_CHAINING_SHIFT       2
-+#define ENETDMAC_CHANCFG_CHAINING_MASK        (1 << ENETDMAC_CHANCFG_CHAINING_SHIFT)
-+#define ENETDMAC_CHANCFG_WRAP_EN_SHIFT        3
-+#define ENETDMAC_CHANCFG_WRAP_EN_MASK (1 << ENETDMAC_CHANCFG_WRAP_EN_SHIFT)
-+#define ENETDMAC_CHANCFG_FLOWC_EN_SHIFT       4
-+#define ENETDMAC_CHANCFG_FLOWC_EN_MASK        (1 << ENETDMAC_CHANCFG_FLOWC_EN_SHIFT)
- /* Interrupt Control/Status register */
--#define ENETDMAC_IR_REG(x)            (0x4 + (x) * 0x10)
-+#define ENETDMAC_IR_REG                       (0x4)
- #define ENETDMAC_IR_BUFDONE_MASK      (1 << 0)
- #define ENETDMAC_IR_PKTDONE_MASK      (1 << 1)
- #define ENETDMAC_IR_NOTOWNER_MASK     (1 << 2)
- /* Interrupt Mask register */
--#define ENETDMAC_IRMASK_REG(x)                (0x8 + (x) * 0x10)
-+#define ENETDMAC_IRMASK_REG           (0x8)
- /* Maximum Burst Length */
--#define ENETDMAC_MAXBURST_REG(x)      (0xc + (x) * 0x10)
-+#define ENETDMAC_MAXBURST_REG         (0xc)
- /*************************************************************************
-@@ -817,16 +844,16 @@
-  *************************************************************************/
- /* Ring Start Address register */
--#define ENETDMAS_RSTART_REG(x)                ((x) * 0x10)
-+#define ENETDMAS_RSTART_REG           (0x0)
- /* State Ram Word 2 */
--#define ENETDMAS_SRAM2_REG(x)         (0x4 + (x) * 0x10)
-+#define ENETDMAS_SRAM2_REG            (0x4)
- /* State Ram Word 3 */
--#define ENETDMAS_SRAM3_REG(x)         (0x8 + (x) * 0x10)
-+#define ENETDMAS_SRAM3_REG            (0x8)
- /* State Ram Word 4 */
--#define ENETDMAS_SRAM4_REG(x)         (0xc + (x) * 0x10)
-+#define ENETDMAS_SRAM4_REG            (0xc)
- /*************************************************************************
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -115,26 +115,28 @@ static inline void enet_dma_writel(struc
-       bcm_writel(val, bcm_enet_shared_base[0] + off);
- }
--static inline u32 enet_dmac_readl(struct bcm_enet_priv *priv, u32 off)
-+static inline u32 enet_dmac_readl(struct bcm_enet_priv *priv, u32 off, int chan)
- {
--      return bcm_readl(bcm_enet_shared_base[1] + off);
-+      return bcm_readl(bcm_enet_shared_base[1] +
-+              (bcm63xx_enetdmacreg(off) + (chan * priv->dma_chan_width)));
- }
- static inline void enet_dmac_writel(struct bcm_enet_priv *priv,
--                                     u32 val, u32 off)
-+                                     u32 val, u32 off, int chan)
- {
--      bcm_writel(val, bcm_enet_shared_base[1] + off);
-+      bcm_writel(val, bcm_enet_shared_base[1] +
-+              (bcm63xx_enetdmacreg(off) + (chan * priv->dma_chan_width)));
- }
--static inline u32 enet_dmas_readl(struct bcm_enet_priv *priv, u32 off)
-+static inline u32 enet_dmas_readl(struct bcm_enet_priv *priv, u32 off, int chan)
- {
--      return bcm_readl(bcm_enet_shared_base[2] + off);
-+      return bcm_readl(bcm_enet_shared_base[2] + (off + (chan * priv->dma_chan_width)));
- }
- static inline void enet_dmas_writel(struct bcm_enet_priv *priv,
--                                     u32 val, u32 off)
-+                                     u32 val, u32 off, int chan)
- {
--      bcm_writel(val, bcm_enet_shared_base[2] + off);
-+      bcm_writel(val, bcm_enet_shared_base[2] + (off + (chan * priv->dma_chan_width)));
- }
- /*
-@@ -270,7 +272,7 @@ static int bcm_enet_refill_rx(struct net
-               len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
-               len_stat |= DMADESC_OWNER_MASK;
-               if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
--                      len_stat |= DMADESC_WRAP_MASK;
-+                      len_stat |= (DMADESC_WRAP_MASK >> priv->dma_desc_shift);
-                       priv->rx_dirty_desc = 0;
-               } else {
-                       priv->rx_dirty_desc++;
-@@ -281,7 +283,10 @@ static int bcm_enet_refill_rx(struct net
-               priv->rx_desc_count++;
-               /* tell dma engine we allocated one buffer */
--              enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+              if (!priv->dma_no_sram)
-+                      enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+              else
-+                      enet_dmac_writel(priv, 1, ENETDMAC_BUFALLOC, priv->rx_chan);
-       }
-       /* If rx ring is still empty, set a timer to try allocating
-@@ -357,7 +362,8 @@ static int bcm_enet_receive_queue(struct
-               /* if the packet does not have start of packet _and_
-                * end of packet flag set, then just recycle it */
--              if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
-+              if ((len_stat & (DMADESC_ESOP_MASK >> priv->dma_desc_shift)) !=
-+                      (DMADESC_ESOP_MASK >> priv->dma_desc_shift)) {
-                       dev->stats.rx_dropped++;
-                       continue;
-               }
-@@ -418,8 +424,8 @@ static int bcm_enet_receive_queue(struct
-               bcm_enet_refill_rx(dev);
-               /* kick rx dma */
--              enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
--                               ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+              enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+                                       ENETDMAC_CHANCFG, priv->rx_chan);
-       }
-       return processed;
-@@ -494,10 +500,10 @@ static int bcm_enet_poll(struct napi_str
-       dev = priv->net_dev;
-       /* ack interrupts */
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IR_REG(priv->rx_chan));
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IR_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IR, priv->rx_chan);
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IR, priv->tx_chan);
-       /* reclaim sent skb */
-       tx_work_done = bcm_enet_tx_reclaim(dev, 0);
-@@ -516,10 +522,10 @@ static int bcm_enet_poll(struct napi_str
-       napi_complete(napi);
-       /* restore rx/tx interrupt */
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IRMASK, priv->tx_chan);
-       return rx_work_done;
- }
-@@ -562,8 +568,8 @@ static irqreturn_t bcm_enet_isr_dma(int
-       priv = netdev_priv(dev);
-       /* mask rx/tx interrupts */
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-       napi_schedule(&priv->napi);
-@@ -624,14 +630,14 @@ static int bcm_enet_start_xmit(struct sk
-                                      DMA_TO_DEVICE);
-       len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
--      len_stat |= DMADESC_ESOP_MASK |
-+      len_stat |= (DMADESC_ESOP_MASK >> priv->dma_desc_shift) |
-               DMADESC_APPEND_CRC |
-               DMADESC_OWNER_MASK;
-       priv->tx_curr_desc++;
-       if (priv->tx_curr_desc == priv->tx_ring_size) {
-               priv->tx_curr_desc = 0;
--              len_stat |= DMADESC_WRAP_MASK;
-+              len_stat |= (DMADESC_WRAP_MASK >> priv->dma_desc_shift);
-       }
-       priv->tx_desc_count--;
-@@ -642,8 +648,8 @@ static int bcm_enet_start_xmit(struct sk
-       wmb();
-       /* kick tx dma */
--      enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
--                       ENETDMAC_CHANCFG_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+                               ENETDMAC_CHANCFG, priv->tx_chan);
-       /* stop queue if no more desc available */
-       if (!priv->tx_desc_count)
-@@ -771,6 +777,9 @@ static void bcm_enet_set_flow(struct bcm
-               val &= ~ENET_RXCFG_ENFLOW_MASK;
-       enet_writel(priv, val, ENET_RXCFG_REG);
-+      if (priv->dma_no_sram)
-+              return;
-+
-       /* tx flow control (pause frame generation) */
-       val = enet_dma_readl(priv, ENETDMA_CFG_REG);
-       if (tx_en)
-@@ -886,8 +895,8 @@ static int bcm_enet_open(struct net_devi
-       /* mask all interrupts and request them */
-       enet_writel(priv, 0, ENET_IRMASK_REG);
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-       ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
-       if (ret)
-@@ -966,8 +975,12 @@ static int bcm_enet_open(struct net_devi
-       priv->rx_curr_desc = 0;
-       /* initialize flow control buffer allocation */
--      enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
--                      ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+      if (!priv->dma_no_sram)
-+              enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+                              ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+      else
-+              enet_dmac_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+                              ENETDMAC_BUFALLOC, priv->rx_chan);
-       if (bcm_enet_refill_rx(dev)) {
-               dev_err(kdev, "cannot allocate rx skb queue\n");
-@@ -976,18 +989,30 @@ static int bcm_enet_open(struct net_devi
-       }
-       /* write rx & tx ring addresses */
--      enet_dmas_writel(priv, priv->rx_desc_dma,
--                       ENETDMAS_RSTART_REG(priv->rx_chan));
--      enet_dmas_writel(priv, priv->tx_desc_dma,
--                       ENETDMAS_RSTART_REG(priv->tx_chan));
-+      if (!priv->dma_no_sram) {
-+              enet_dmas_writel(priv, priv->rx_desc_dma,
-+                               ENETDMAS_RSTART_REG, priv->rx_chan);
-+              enet_dmas_writel(priv, priv->tx_desc_dma,
-+                       ENETDMAS_RSTART_REG, priv->tx_chan);
-+      } else {
-+              enet_dmac_writel(priv, priv->rx_desc_dma,
-+                              ENETDMAC_RSTART, priv->rx_chan);
-+              enet_dmac_writel(priv, priv->tx_desc_dma,
-+                              ENETDMAC_RSTART, priv->tx_chan);
-+      }
-       /* clear remaining state ram for rx & tx channel */
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-+      if (!priv->dma_no_sram) {
-+              enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->rx_chan);
-+              enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->tx_chan);
-+              enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->rx_chan);
-+              enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->tx_chan);
-+              enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->rx_chan);
-+              enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->tx_chan);
-+      } else {
-+              enet_dmac_writel(priv, 0, ENETDMAC_FC, priv->rx_chan);
-+              enet_dmac_writel(priv, 0, ENETDMAC_FC, priv->tx_chan);
-+      }
-       /* set max rx/tx length */
-       enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
-@@ -995,18 +1020,24 @@ static int bcm_enet_open(struct net_devi
-       /* set dma maximum burst len */
-       enet_dmac_writel(priv, priv->dma_maxburst,
--                       ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+                       ENETDMAC_MAXBURST, priv->rx_chan);
-       enet_dmac_writel(priv, priv->dma_maxburst,
--                       ENETDMAC_MAXBURST_REG(priv->tx_chan));
-+                       ENETDMAC_MAXBURST, priv->tx_chan);
-       /* set correct transmit fifo watermark */
-       enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
-       /* set flow control low/high threshold to 1/3 / 2/3 */
--      val = priv->rx_ring_size / 3;
--      enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
--      val = (priv->rx_ring_size * 2) / 3;
--      enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+      if (!priv->dma_no_sram) {
-+              val = priv->rx_ring_size / 3;
-+              enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-+              val = (priv->rx_ring_size * 2) / 3;
-+              enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+      } else {
-+              enet_dmac_writel(priv, 5, ENETDMAC_FC, priv->rx_chan);
-+              enet_dmac_writel(priv, priv->rx_ring_size, ENETDMAC_LEN, priv->rx_chan);
-+              enet_dmac_writel(priv, priv->tx_ring_size, ENETDMAC_LEN, priv->tx_chan);
-+      }
-       /* all set, enable mac and interrupts, start dma engine and
-        * kick rx dma channel */
-@@ -1015,26 +1046,26 @@ static int bcm_enet_open(struct net_devi
-       val |= ENET_CTL_ENABLE_MASK;
-       enet_writel(priv, val, ENET_CTL_REG);
-       enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
--      enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
--                       ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+      enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+                       ENETDMAC_CHANCFG, priv->rx_chan);
-       /* watch "mib counters about to overflow" interrupt */
-       enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
-       enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
-       /* watch "packet transferred" interrupt in rx and tx */
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IR_REG(priv->rx_chan));
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IR_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IR, priv->rx_chan);
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IR, priv->tx_chan);
-       /* make sure we enable napi before rx interrupt  */
-       napi_enable(&priv->napi);
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+                       ENETDMAC_IRMASK, priv->tx_chan);
-       if (priv->has_phy)
-               phy_start(priv->phydev);
-@@ -1111,13 +1142,13 @@ static void bcm_enet_disable_dma(struct
- {
-       int limit;
--      enet_dmac_writel(priv, 0, ENETDMAC_CHANCFG_REG(chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_CHANCFG, chan);
-       limit = 1000;
-       do {
-               u32 val;
--              val = enet_dmac_readl(priv, ENETDMAC_CHANCFG_REG(chan));
-+              val = enet_dmac_readl(priv, ENETDMAC_CHANCFG, chan);
-               if (!(val & ENETDMAC_CHANCFG_EN_MASK))
-                       break;
-               udelay(1);
-@@ -1144,8 +1175,8 @@ static int bcm_enet_stop(struct net_devi
-       /* mask all interrupts */
-       enet_writel(priv, 0, ENET_IRMASK_REG);
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-       /* make sure no mib update is scheduled */
-       cancel_work_sync(&priv->mib_update_task);
-@@ -1752,6 +1783,11 @@ static int bcm_enet_probe(struct platfor
-               priv->pause_tx = pd->pause_tx;
-               priv->force_duplex_full = pd->force_duplex_full;
-               priv->force_speed_100 = pd->force_speed_100;
-+              priv->dma_chan_en_mask = pd->dma_chan_en_mask;
-+              priv->dma_chan_int_mask = pd->dma_chan_int_mask;
-+              priv->dma_chan_width = pd->dma_chan_width;
-+              priv->dma_no_sram = pd->dma_no_sram;
-+              priv->dma_desc_shift = pd->dma_desc_shift;
-       }
-       if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-@@ -2123,8 +2159,8 @@ static int bcm_enetsw_open(struct net_de
-       kdev = &priv->pdev->dev;
-       /* mask all interrupts and request them */
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-       ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
-                         IRQF_DISABLED, dev->name, dev);
-@@ -2248,23 +2284,23 @@ static int bcm_enetsw_open(struct net_de
-       /* write rx & tx ring addresses */
-       enet_dmas_writel(priv, priv->rx_desc_dma,
--                       ENETDMAS_RSTART_REG(priv->rx_chan));
-+                       ENETDMAS_RSTART_REG, priv->rx_chan);
-       enet_dmas_writel(priv, priv->tx_desc_dma,
--                       ENETDMAS_RSTART_REG(priv->tx_chan));
-+                       ENETDMAS_RSTART_REG, priv->tx_chan);
-       /* clear remaining state ram for rx & tx channel */
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
--      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->rx_chan);
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->tx_chan);
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->rx_chan);
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->tx_chan);
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->rx_chan);
-+      enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->tx_chan);
-       /* set dma maximum burst len */
-       enet_dmac_writel(priv, priv->dma_maxburst,
--                       ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+                       ENETDMAC_MAXBURST, priv->rx_chan);
-       enet_dmac_writel(priv, priv->dma_maxburst,
--                       ENETDMAC_MAXBURST_REG(priv->tx_chan));
-+                       ENETDMAC_MAXBURST, priv->tx_chan);
-       /* set flow control low/high threshold to 1/3 / 2/3 */
-       val = priv->rx_ring_size / 3;
-@@ -2277,21 +2313,21 @@ static int bcm_enetsw_open(struct net_de
-       wmb();
-       enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-       enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
--                       ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+                       ENETDMAC_CHANCFG, priv->rx_chan);
-       /* watch "packet transferred" interrupt in rx and tx */
-       enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IR_REG(priv->rx_chan));
-+                       ENETDMAC_IR, priv->rx_chan);
-       enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IR_REG(priv->tx_chan));
-+                       ENETDMAC_IR, priv->tx_chan);
-       /* make sure we enable napi before rx interrupt  */
-       napi_enable(&priv->napi);
-       enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IRMASK_REG(priv->rx_chan));
-+                       ENETDMAC_IRMASK, priv->rx_chan);
-       enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
--                       ENETDMAC_IRMASK_REG(priv->tx_chan));
-+                       ENETDMAC_IRMASK, priv->tx_chan);
-       netif_carrier_on(dev);
-       netif_start_queue(dev);
-@@ -2397,8 +2433,8 @@ static int bcm_enetsw_stop(struct net_de
-       del_timer_sync(&priv->rx_timeout);
-       /* mask all interrupts */
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
--      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+      enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-       /* disable dma & mac */
-       bcm_enet_disable_dma(priv, priv->tx_chan);
-@@ -2736,6 +2772,9 @@ static int bcm_enetsw_probe(struct platf
-               memcpy(priv->used_ports, pd->used_ports,
-                      sizeof (pd->used_ports));
-               priv->num_ports = pd->num_ports;
-+              priv->dma_chan_en_mask = pd->dma_chan_en_mask;
-+              priv->dma_chan_int_mask = pd->dma_chan_int_mask;
-+              priv->dma_chan_width = pd->dma_chan_width;
-       }
-       ret = compute_hw_mtu(priv, dev->mtu);
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -339,6 +339,21 @@ struct bcm_enet_priv {
-       /* used to poll switch port state */
-       struct timer_list swphy_poll;
-       spinlock_t enetsw_mdio_lock;
-+
-+      /* dma channel enable mask */
-+      u32 dma_chan_en_mask;
-+
-+      /* dma channel interrupt mask */
-+      u32 dma_chan_int_mask;
-+
-+      /* dma engine has *no* internal SRAM */
-+      unsigned int dma_no_sram;
-+
-+      /* dma channel width */
-+      unsigned int dma_chan_width;
-+
-+      /* dma descriptor shift value */
-+      unsigned int dma_desc_shift;
- };
- static inline int bcm_enet_port_is_rgmii(int portid)
diff --git a/target/linux/brcm63xx/patches-3.8/420-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.8/420-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644 (file)
index bdcb3e0..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check) __init;
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -19,6 +19,7 @@
- struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-+      unsigned int    endian_check:1;
- };
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -172,12 +172,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+      unsigned endian_check)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-+      ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -992,7 +992,8 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+                      board.caldata[i].endian_check);
-       return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.8/421-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.8/421-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644 (file)
index 4f77179..0000000
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -993,7 +993,7 @@ int __init board_register_devices(void)
-       /* register any fixups */
-       for (i = 0; i < board.has_caldata; i++)
-               pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check);
-+                      board.caldata[i].endian_check, board.caldata[i].led_pin);
-       return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -173,13 +173,14 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check)
-+      unsigned endian_check, int led_pin)
- {
-       if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-               return;
-       ath9k_fixups[ath9k_num_fixups].slot = slot;
-       ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+      ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-       if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-               return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -20,6 +20,7 @@ struct ath9k_caldata {
-       unsigned int    slot;
-       u32             caldata_offset;
-       unsigned int    endian_check:1;
-+      int             led_pin;
- };
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
--      unsigned endian_check) __init;
-+      unsigned endian_check, int led_pin) __init;
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.8/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.8/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644 (file)
index 69d9223..0000000
+++ /dev/null
@@ -1,205 +0,0 @@
-From 5ed5b5e9614fa5b02da699ab565af76c7e63d64d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 7 Jan 2013 17:45:39 +0100
-Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
-
----
- arch/mips/bcm63xx/Makefile                         |    2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   17 ++++-
- arch/mips/bcm63xx/dev-flash.c                      |    2 +-
- arch/mips/bcm63xx/pci-rt2x00-fixup.c               |   71 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h   |    2 +-
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    9 ++-
- .../include/asm/mach-bcm63xx/pci_rt2x00_fixup.h    |    9 +++
- 7 files changed, 104 insertions(+), 8 deletions(-)
- create mode 100644 arch/mips/bcm63xx/pci-rt2x00-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -2,7 +2,7 @@ obj-y          += clk.o cpu.o cs.o gpio.o irq.o
-                  setup.o timer.o dev-dsp.o dev-enet.o dev-flash.o \
-                  dev-hsspi.o dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o \
-                  dev-wdt.o dev-usb-ehci.o dev-usb-ohci.o dev-usb-usbd.o \
--                 pci-ath9k-fixup.o usb-common.o
-+                 pci-ath9k-fixup.o pci-rt2x00-fixup.o usb-common.o
- obj-$(CONFIG_EARLY_PRINTK)    += early_printk.o
- obj-y         += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -34,6 +34,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <board_bcm963xx.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- #include <uapi/linux/bcm963xx_tag.h>
-@@ -991,9 +992,19 @@ int __init board_register_devices(void)
-       }
-       /* register any fixups */
--      for (i = 0; i < board.has_caldata; i++)
--              pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
--                      board.caldata[i].endian_check, board.caldata[i].led_pin);
-+      for (i = 0; i < board.has_caldata; i++) {
-+              switch (board.caldata[i].vendor) {
-+              case PCI_VENDOR_ID_ATHEROS:
-+                      pci_enable_ath9k_fixup(board.caldata[i].slot,
-+                              board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+                              board.caldata[i].led_pin);
-+                      break;
-+              case PCI_VENDOR_ID_RALINK:
-+                      pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+                              board.caldata[i].eeprom);
-+                      break;
-+              }
-+      }
-       return 0;
- }
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -141,7 +141,7 @@ static int __init bcm63xx_detect_flash_t
-       return 0;
- }
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
- {
-       u32 val;
-       unsigned int i;
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,72 @@
-+/*
-+ *  Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ *  Based on
-+ *
-+ *  Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ *  Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ *  This program is free software; you can redistribute it and/or modify it
-+ *  under the terms of the GNU General Public License version 2 as published
-+ *  by the Free Software Foundation.
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+      unsigned slot;
-+      u8 mac[ETH_ALEN];
-+      struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+      {
-+              .slot = 255,
-+      },
-+      {
-+              .slot = 255,
-+      },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+      unsigned i;
-+      struct rt2x00_platform_data *pdata = NULL;
-+
-+      for (i = 0; i < rt2x00_num_fixups; i++) {
-+              if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+                      continue;
-+
-+              pdata = &rt2x00_fixups[i].pdata;
-+              break;
-+      }
-+
-+      dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+      if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+      if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+              return;
-+
-+      rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+      rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,6 +11,6 @@ enum {
- extern int bcm63xx_attached_flash;
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
- #endif /* __BCM63XX_FLASH_H */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -9,6 +9,7 @@
- #include <bcm63xx_dev_usb_usbd.h>
- #include <bcm63xx_dev_dsp.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
- /*
-  * flash mapping
-@@ -16,11 +17,15 @@
- #define BCM963XX_CFE_VERSION_OFFSET   0x570
- #define BCM963XX_NVRAM_OFFSET         0x580
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+      unsigned int    vendor;
-       unsigned int    slot;
-       u32             caldata_offset;
-+      /* Atheros */
-       unsigned int    endian_check:1;
-       int             led_pin;
-+      /* Ralink */
-+      char*           eeprom;
- };
- /*
-@@ -45,7 +50,7 @@ struct board_info {
-       unsigned int    has_caldata:2;
-       /* wifi calibration data config */
--      struct ath9k_caldata caldata[2];
-+      struct bcm63xx_caldata caldata[2];
-       /* ethernet config */
-       struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet_add_b53_support.patch b/target/linux/brcm63xx/patches-3.8/423-bcm63xx_enet_add_b53_support.patch
deleted file mode 100644 (file)
index cdb7fdc..0000000
+++ /dev/null
@@ -1,169 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -336,6 +336,9 @@ struct bcm_enet_priv {
-       struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-       int sw_port_link[ENETSW_MAX_PORT];
-+      /* platform device for associated switch */
-+      struct platform_device *b53_device;
-+
-       /* used to poll switch port state */
-       struct timer_list swphy_poll;
-       spinlock_t enetsw_mdio_lock;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -30,6 +30,7 @@
- #include <linux/dma-mapping.h>
- #include <linux/platform_device.h>
- #include <linux/if_vlan.h>
-+#include <linux/platform_data/b53.h>
- #include <bcm63xx_dev_enet.h>
- #include "bcm63xx_enet.h"
-@@ -1992,7 +1993,8 @@ static int bcm_enet_remove(struct platfo
-       return 0;
- }
--struct platform_driver bcm63xx_enet_driver = {
-+
-+static struct platform_driver bcm63xx_enet_driver = {
-       .probe  = bcm_enet_probe,
-       .remove = bcm_enet_remove,
-       .driver = {
-@@ -2001,6 +2003,42 @@ struct platform_driver bcm63xx_enet_driv
-       },
- };
-+struct b53_platform_data bcm63xx_b53_pdata = {
-+      .chip_id = 0x6300,
-+      .big_endian = 1,
-+};
-+
-+struct platform_device bcm63xx_b53_dev = {
-+      .name           = "b53-switch",
-+      .id             = -1,
-+      .dev            = {
-+              .platform_data = &bcm63xx_b53_pdata,
-+      },
-+};
-+
-+static int bcmenet_switch_register(struct bcm_enet_priv *priv, u16 port_mask)
-+{
-+      int ret;
-+
-+      bcm63xx_b53_pdata.regs = priv->base;
-+      bcm63xx_b53_pdata.enabled_ports = port_mask;
-+      bcm63xx_b53_pdata.alias = priv->net_dev->name;
-+
-+      ret = platform_device_register(&bcm63xx_b53_dev);
-+      if (!ret)
-+              priv->b53_device = &bcm63xx_b53_dev;
-+
-+      return ret;
-+}
-+
-+static void bcmenet_switch_unregister(struct bcm_enet_priv *priv)
-+{
-+      if (priv->b53_device)
-+              platform_device_unregister(&bcm63xx_b53_dev);
-+
-+      priv->b53_device = NULL;
-+}
-+
- /*
-  * switch mii access callbacks
-  */
-@@ -2249,29 +2287,6 @@ static int bcm_enetsw_open(struct net_de
-               enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-       }
--      /* reset mib */
--      val = enetsw_readb(priv, ENETSW_GMCR_REG);
--      val |= ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--      val &= ~ENETSW_GMCR_RST_MIB_MASK;
--      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
--      mdelay(1);
--
--      /* force CPU port state */
--      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
--      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
--      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
--
--      /* enable switch forward engine */
--      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
--      val |= ENETSW_SWMODE_FWD_EN_MASK;
--      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
--
--      /* enable jumbo on all ports */
--      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
--      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
--
-       /* initialize flow control buffer allocation */
-       enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-                       ENETDMA_BUFALLOC_REG(priv->rx_chan));
-@@ -2739,6 +2754,9 @@ static int bcm_enetsw_probe(struct platf
-       struct bcm63xx_enetsw_platform_data *pd;
-       struct resource *res_mem;
-       int ret, irq_rx, irq_tx;
-+      unsigned i, num_ports = 0;
-+      u16 port_mask = BIT(8);
-+      u8 val;
-       /* stop if shared driver failed, assume driver->probe will be
-        * called in the same order we register devices (correct ?) */
-@@ -2826,6 +2844,43 @@ static int bcm_enetsw_probe(struct platf
-       priv->pdev = pdev;
-       priv->net_dev = dev;
-+      /* reset mib */
-+      val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+      val |= ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+      val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+      enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+      mdelay(1);
-+
-+      /* force CPU port state */
-+      val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+      val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+      enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+      /* enable switch forward engine */
-+      val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+      val |= ENETSW_SWMODE_FWD_EN_MASK;
-+      enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+      /* enable jumbo on all ports */
-+      enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+      enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+      for (i = 0; i < priv->num_ports; i++) {
-+              struct bcm63xx_enetsw_port *port = &priv->used_ports[i];
-+
-+              if (!port->used)
-+                      continue;
-+
-+              num_ports++;
-+              port_mask |= BIT(i);
-+      }
-+
-+      /* only register if there is more than one external port */
-+      if (num_ports > 1)
-+              bcmenet_switch_register(priv, port_mask);
-+
-       return 0;
- out_put_clk:
-@@ -2856,6 +2911,9 @@ static int bcm_enetsw_remove(struct plat
-       priv = netdev_priv(dev);
-       unregister_netdev(dev);
-+      /* remove switch */
-+      bcmenet_switch_unregister(priv);
-+
-       /* release device resources */
-       iounmap(priv->base);
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/target/linux/brcm63xx/patches-3.8/424-bcm3368_support.patch b/target/linux/brcm63xx/patches-3.8/424-bcm3368_support.patch
deleted file mode 100644 (file)
index 53542b1..0000000
+++ /dev/null
@@ -1,504 +0,0 @@
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -13,6 +13,10 @@ config BCM63XX_EHCI
-       select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD
-       select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD
-+config BCM63XX_CPU_3368
-+      bool "support 3368 CPU"
-+      select HW_HAS_PCI
-+
- config BCM63XX_CPU_6328
-       bool "support 6328 CPU"
-       select HW_HAS_PCI
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -29,6 +29,14 @@ static u8 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-+static const unsigned long bcm3368_regs_base[] = {
-+      __GEN_CPU_REGS_TABLE(3368)
-+};
-+
-+static const int bcm3368_irqs[] = {
-+      __GEN_CPU_IRQ_TABLE(3368)
-+};
-+
- static const unsigned long bcm6328_regs_base[] = {
-       __GEN_CPU_REGS_TABLE(6328)
- };
-@@ -116,6 +124,9 @@ unsigned int bcm63xx_get_memory_size(voi
- static unsigned int detect_cpu_clock(void)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              return 300000000;
-+
-       case BCM6328_CPU_ID:
-       {
-               unsigned int tmp, mips_pll_fcvo;
-@@ -266,7 +277,7 @@ static unsigned int detect_memory_size(v
-               banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1;
-       }
--      if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-+      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-               val = bcm_memc_readl(MEMC_CFG_REG);
-               rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT;
-               cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT;
-@@ -302,10 +313,17 @@ void __init bcm63xx_cpu_init(void)
-               chipid_reg = BCM_6345_PERF_BASE;
-               break;
-       case CPU_BMIPS4350:
--              if ((read_c0_prid() & 0xf0) == 0x10)
-+              switch ((read_c0_prid() & 0xff)) {
-+              case 0x04:
-+                      chipid_reg = BCM_3368_PERF_BASE;
-+                      break;
-+              case 0x10:
-                       chipid_reg = BCM_6345_PERF_BASE;
--              else
-+                      break;
-+              default:
-                       chipid_reg = BCM_6368_PERF_BASE;
-+                      break;
-+              }
-               break;
-       }
-@@ -322,6 +340,10 @@ void __init bcm63xx_cpu_init(void)
-       bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT;
-       switch (bcm63xx_cpu_id) {
-+      case BCM3368_CPU_ID:
-+              bcm63xx_regs_base = bcm3368_regs_base;
-+              bcm63xx_irqs = bcm3368_irqs;
-+              break;
-       case BCM6328_CPU_ID:
-               bcm63xx_regs_base = bcm6328_regs_base;
-               bcm63xx_irqs = bcm6328_irqs;
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ b/arch/mips/bcm63xx/dev-uart.c
-@@ -54,8 +54,8 @@ int __init bcm63xx_uart_register(unsigne
-       if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
-               return -ENODEV;
--      if (id == 1 && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
--          !BCMCPU_IS_6368())
-+      if (id == 1 && !BCMCPU_IS_3368() && !BCMCPU_IS_6328() &&
-+                      !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-               return -ENODEV;
-       if (id == 0) {
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -30,7 +30,9 @@ void __init prom_init(void)
-       bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
-       /* disable all hardware blocks clock for now */
--      if (BCMCPU_IS_6328())
-+      if (BCMCPU_IS_3368())
-+              mask = CKCTL_3368_ALL_SAFE_EN;
-+      else if (BCMCPU_IS_6328())
-               mask = CKCTL_6328_ALL_SAFE_EN;
-       else if (BCMCPU_IS_6338())
-               mask = CKCTL_6338_ALL_SAFE_EN;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)
-       /* mask and clear all external irq */
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              perf_regs[0] = PERF_EXTIRQ_CFG_REG_3368;
-+              break;
-       case BCM6328_CPU_ID:
-               perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-               break;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -9,6 +9,7 @@
-  * compile time if only one CPU support is enabled (idea stolen from
-  * arm mach-types)
-  */
-+#define BCM3368_CPU_ID                0x3368
- #define BCM6328_CPU_ID                0x6328
- #define BCM6338_CPU_ID                0x6338
- #define BCM6345_CPU_ID                0x6345
-@@ -22,6 +23,19 @@ u16 __bcm63xx_get_cpu_id(void);
- u8 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+# ifdef bcm63xx_get_cpu_id
-+#  undef bcm63xx_get_cpu_id
-+#  define bcm63xx_get_cpu_id()        __bcm63xx_get_cpu_id()
-+#  define BCMCPU_RUNTIME_DETECT
-+# else
-+#  define bcm63xx_get_cpu_id()        BCM3368_CPU_ID
-+# endif
-+# define BCMCPU_IS_3368()     (bcm63xx_get_cpu_id() == BCM3368_CPU_ID)
-+#else
-+# define BCMCPU_IS_3368()     (0)
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6328
- # ifdef bcm63xx_get_cpu_id
- #  undef bcm63xx_get_cpu_id
-@@ -196,6 +210,53 @@ enum bcm63xx_regs_set {
- #define RSET_RNG_SIZE                 20
- /*
-+ * 3368 register sets base address
-+ */
-+#define BCM_3368_DSL_LMEM_BASE                (0xdeadbeef)
-+#define BCM_3368_PERF_BASE            (0xfff8c000)
-+#define BCM_3368_TIMER_BASE           (0xfff8c040)
-+#define BCM_3368_WDT_BASE             (0xfff8c080)
-+#define BCM_3368_UART0_BASE           (0xfff8c100)
-+#define BCM_3368_UART1_BASE           (0xfff8c120)
-+#define BCM_3368_GPIO_BASE            (0xfff8c080)
-+#define BCM_3368_SPI_BASE             (0xfff8c800)
-+#define BCM_3368_HSSPI_BASE           (0xdeadbeef)
-+#define BCM_3368_UDC0_BASE            (0xdeadbeef)
-+#define BCM_3368_USBDMA_BASE          (0xdeadbeef)
-+#define BCM_3368_OHCI0_BASE           (0xdeadbeef)
-+#define BCM_3368_OHCI_PRIV_BASE               (0xdeadbeef)
-+#define BCM_3368_USBH_PRIV_BASE               (0xdeadbeef)
-+#define BCM_3368_USBD_BASE            (0xdeadbeef)
-+#define BCM_3368_MPI_BASE             (0xfff80000)
-+#define BCM_3368_PCMCIA_BASE          (0xfff80054)
-+#define BCM_3368_PCIE_BASE            (0xdeadbeef)
-+#define BCM_3368_SDRAM_REGS_BASE      (0xdeadbeef)
-+#define BCM_3368_DSL_BASE             (0xdeadbeef)
-+#define BCM_3368_UBUS_BASE            (0xdeadbeef)
-+#define BCM_3368_ENET0_BASE           (0xfff98000)
-+#define BCM_3368_ENET1_BASE           (0xfff98800)
-+#define BCM_3368_ENETDMA_BASE         (0xfff99800)
-+#define BCM_3368_ENETDMAC_BASE                (0xfff99900)
-+#define BCM_3368_ENETDMAS_BASE                (0xfff99a00)
-+#define BCM_3368_ENETSW_BASE          (0xdeadbeef)
-+#define BCM_3368_EHCI0_BASE           (0xdeadbeef)
-+#define BCM_3368_SDRAM_BASE           (0xdeadbeef)
-+#define BCM_3368_MEMC_BASE            (0xfff84000)
-+#define BCM_3368_DDR_BASE             (0xdeadbeef)
-+#define BCM_3368_M2M_BASE             (0xdeadbeef)
-+#define BCM_3368_ATM_BASE             (0xdeadbeef)
-+#define BCM_3368_XTM_BASE             (0xdeadbeef)
-+#define BCM_3368_XTMDMA_BASE          (0xdeadbeef)
-+#define BCM_3368_XTMDMAC_BASE         (0xdeadbeef)
-+#define BCM_3368_XTMDMAS_BASE         (0xdeadbeef)
-+#define BCM_3368_PCM_BASE             (0xfff9c200)
-+#define BCM_3368_PCMDMA_BASE          (0xdeadbeef)
-+#define BCM_3368_PCMDMAC_BASE         (0xdeadbeef)
-+#define BCM_3368_PCMDMAS_BASE         (0xdeadbeef)
-+#define BCM_3368_RNG_BASE             (0xdeadbeef)
-+#define BCM_3368_MISC_BASE            (0xdeadbeef)
-+
-+/*
-  * 6328 register sets base address
-  */
- #define BCM_6328_DSL_LMEM_BASE                (0xdeadbeef)
-@@ -633,6 +694,9 @@ static inline unsigned long bcm63xx_regs
- #ifdef BCMCPU_RUNTIME_DETECT
-       return bcm63xx_regs_base[set];
- #else
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+      __GEN_RSET(3368)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       __GEN_RSET(6328)
- #endif
-@@ -701,6 +765,52 @@ enum bcm63xx_irq {
- };
- /*
-+ * 3368 irqs
-+ */
-+#define BCM_3368_TIMER_IRQ            (IRQ_INTERNAL_BASE + 0)
-+#define BCM_3368_SPI_IRQ              (IRQ_INTERNAL_BASE + 1)
-+#define BCM_3368_UART0_IRQ            (IRQ_INTERNAL_BASE + 2)
-+#define BCM_3368_UART1_IRQ            (IRQ_INTERNAL_BASE + 3)
-+#define BCM_3368_DSL_IRQ              0
-+#define BCM_3368_UDC0_IRQ             0
-+#define BCM_3368_OHCI0_IRQ            0
-+#define BCM_3368_ENET0_IRQ            (IRQ_INTERNAL_BASE + 8)
-+#define BCM_3368_ENET1_IRQ            (IRQ_INTERNAL_BASE + 6)
-+#define BCM_3368_ENET_PHY_IRQ         (IRQ_INTERNAL_BASE + 9)
-+#define BCM_3368_ENET0_RXDMA_IRQ      (IRQ_INTERNAL_BASE + 15)
-+#define BCM_3368_ENET0_TXDMA_IRQ      (IRQ_INTERNAL_BASE + 16)
-+#define BCM_3368_HSSPI_IRQ            0
-+#define BCM_3368_EHCI0_IRQ            0
-+#define BCM_3368_USBD_IRQ             0
-+#define BCM_3368_USBD_RXDMA0_IRQ      0
-+#define BCM_3368_USBD_TXDMA0_IRQ      0
-+#define BCM_3368_USBD_RXDMA1_IRQ      0
-+#define BCM_3368_USBD_TXDMA1_IRQ      0
-+#define BCM_3368_USBD_RXDMA2_IRQ      0
-+#define BCM_3368_USBD_TXDMA2_IRQ      0
-+#define BCM_3368_ENET1_RXDMA_IRQ        (IRQ_INTERNAL_BASE + 17)
-+#define BCM_3368_ENET1_TXDMA_IRQ        (IRQ_INTERNAL_BASE + 18)
-+#define BCM_3368_PCI_IRQ              (IRQ_INTERNAL_BASE + 31)
-+#define BCM_3368_PCMCIA_IRQ           0
-+#define BCM_3368_ATM_IRQ              0
-+#define BCM_3368_ENETSW_RXDMA0_IRQ    0
-+#define BCM_3368_ENETSW_RXDMA1_IRQ    0
-+#define BCM_3368_ENETSW_RXDMA2_IRQ    0
-+#define BCM_3368_ENETSW_RXDMA3_IRQ    0
-+#define BCM_3368_ENETSW_TXDMA0_IRQ    0
-+#define BCM_3368_ENETSW_TXDMA1_IRQ    0
-+#define BCM_3368_ENETSW_TXDMA2_IRQ    0
-+#define BCM_3368_ENETSW_TXDMA3_IRQ    0
-+#define BCM_3368_XTM_IRQ              0
-+#define BCM_3368_XTM_DMA0_IRQ         0
-+
-+#define BCM_3368_EXT_IRQ0             (IRQ_INTERNAL_BASE + 25)
-+#define BCM_3368_EXT_IRQ1             (IRQ_INTERNAL_BASE + 26)
-+#define BCM_3368_EXT_IRQ2             (IRQ_INTERNAL_BASE + 27)
-+#define BCM_3368_EXT_IRQ3             (IRQ_INTERNAL_BASE + 28)
-+
-+
-+/*
-  * 6328 irqs
-  */
- #define BCM_6328_HIGH_IRQ_BASE                (IRQ_INTERNAL_BASE + 32)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -11,6 +11,7 @@ static inline unsigned long bcm63xx_gpio
-       switch (bcm63xx_get_cpu_id()) {
-       case BCM6328_CPU_ID:
-               return 32;
-+      case BCM3368_CPU_ID:
-       case BCM6358_CPU_ID:
-               return 40;
-       case BCM6338_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -15,6 +15,39 @@
- /* Clock Control register */
- #define PERF_CKCTL_REG                        0x4
-+#define CKCTL_3368_MAC_EN             (1 << 3)
-+#define CKCTL_3368_TC_EN              (1 << 5)
-+#define CKCTL_3368_US_TOP_EN          (1 << 6)
-+#define CKCTL_3368_DS_TOP_EN          (1 << 7)
-+#define CKCTL_3368_APM_EN             (1 << 8)
-+#define CKCTL_3368_SPI_EN             (1 << 9)
-+#define CKCTL_3368_USBS_EN            (1 << 10)
-+#define CKCTL_3368_BMU_EN             (1 << 11)
-+#define CKCTL_3368_PCM_EN             (1 << 12)
-+#define CKCTL_3368_NTP_EN             (1 << 13)
-+#define CKCTL_3368_ACP_B_EN           (1 << 14)
-+#define CKCTL_3368_ACP_A_EN           (1 << 15)
-+#define CKCTL_3368_EMUSB_EN           (1 << 17)
-+#define CKCTL_3368_ENET0_EN           (1 << 18)
-+#define CKCTL_3368_ENET1_EN           (1 << 19)
-+#define CKCTL_3368_USBU_EN            (1 << 20)
-+#define CKCTL_3368_EPHY_EN            (1 << 21)
-+
-+#define CKCTL_3368_ALL_SAFE_EN                (CKCTL_3368_MAC_EN | \
-+                                       CKCTL_3368_TC_EN | \
-+                                       CKCTL_3368_US_TOP_EN | \
-+                                       CKCTL_3368_DS_TOP_EN | \
-+                                       CKCTL_3368_APM_EN | \
-+                                       CKCTL_3368_SPI_EN | \
-+                                       CKCTL_3368_USBS_EN | \
-+                                       CKCTL_3368_BMU_EN | \
-+                                       CKCTL_3368_PCM_EN | \
-+                                       CKCTL_3368_NTP_EN | \
-+                                       CKCTL_3368_ACP_B_EN | \
-+                                       CKCTL_3368_ACP_A_EN | \
-+                                       CKCTL_3368_EMUSB_EN | \
-+                                       CKCTL_3368_USBU_EN)
-+
- #define CKCTL_6328_PHYMIPS_EN         (1 << 0)
- #define CKCTL_6328_ADSL_QPROC_EN      (1 << 1)
- #define CKCTL_6328_ADSL_AFE_EN                (1 << 2)
-@@ -181,6 +214,7 @@
- #define SYS_PLL_SOFT_RESET            0x1
- /* Interrupt Mask register */
-+#define PERF_IRQMASK_3368_REG         0xc
- #define PERF_IRQMASK_6328_REG(x)      (0x20 + (x) * 0x10)
- #define PERF_IRQMASK_6338_REG         0xc
- #define PERF_IRQMASK_6345_REG         0xc
-@@ -190,6 +224,7 @@
- #define PERF_IRQMASK_6368_REG(x)      (0x20 + (x) * 0x10)
- /* Interrupt Status register */
-+#define PERF_IRQSTAT_3368_REG         0x10
- #define PERF_IRQSTAT_6328_REG(x)      (0x28 + (x) * 0x10)
- #define PERF_IRQSTAT_6338_REG         0x10
- #define PERF_IRQSTAT_6345_REG         0x10
-@@ -199,6 +234,7 @@
- #define PERF_IRQSTAT_6368_REG(x)      (0x28 + (x) * 0x10)
- /* External Interrupt Configuration register */
-+#define PERF_EXTIRQ_CFG_REG_3368      0x14
- #define PERF_EXTIRQ_CFG_REG_6328      0x18
- #define PERF_EXTIRQ_CFG_REG_6338      0x14
- #define PERF_EXTIRQ_CFG_REG_6345      0x14
-@@ -1386,7 +1422,7 @@
- #define SPI_6348_RX_DATA              0x80
- #define SPI_6348_RX_DATA_SIZE         0x3f
--/* BCM 6358/6262/6368 SPI core */
-+/* BCM 3368/6358/6262/6368 SPI core */
- #define SPI_6358_MSG_CTL              0x00    /* 16-bits register */
- #define SPI_6358_MSG_CTL_WIDTH                16
- #define SPI_6358_MSG_DATA             0x02
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -11,6 +11,10 @@ static inline phys_t fixup_bigphys_addr(
- static inline int is_bcm63xx_internal_registers(phys_t offset)
- {
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              if (offset >= 0xfff80000)
-+                      return 1;
-+              break;
-       case BCM6338_CPU_ID:
-       case BCM6345_CPU_ID:
-       case BCM6348_CPU_ID:
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -33,6 +33,19 @@ static DEFINE_SPINLOCK(ipic_lock);
- static DEFINE_SPINLOCK(epic_lock);
- #ifndef BCMCPU_RUNTIME_DETECT
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+#define irq_stat_reg0         PERF_IRQSTAT_3368_REG
-+#define irq_mask_reg0         PERF_IRQMASK_3368_REG
-+#define irq_stat_reg1         0
-+#define irq_mask_reg1         0
-+#define irq_bits              32
-+#define is_ext_irq_cascaded   0
-+#define ext_irq_start         0
-+#define ext_irq_end           0
-+#define ext_irq_count         4
-+#define ext_irq_cfg_reg1      PERF_EXTIRQ_CFG_REG_3368
-+#define ext_irq_cfg_reg2      0
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
- #define irq_stat_reg0         PERF_IRQSTAT_6328_REG(0)
- #define irq_mask_reg0         PERF_IRQMASK_6328_REG(0)
-@@ -165,6 +178,13 @@ static void bcm63xx_init_irq(void)
-       irq_mask_addr1 = bcm63xx_regset_address(RSET_PERF);
-       switch (bcm63xx_get_cpu_id()) {
-+      case BCM3368_CPU_ID:
-+              irq_stat_addr0 += PERF_IRQSTAT_3368_REG;
-+              irq_mask_addr0 += PERF_IRQMASK_3368_REG;
-+              irq_bits = 32;
-+              ext_irq_count = 4;
-+              ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_3368;
-+              break;
-       case BCM6328_CPU_ID:
-               irq_stat_addr0 += PERF_IRQSTAT_6328_REG(0);
-               irq_mask_addr0 += PERF_IRQMASK_6328_REG(0);
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -37,7 +37,7 @@ static __init void bcm63xx_spi_regs_init
- {
-       if (BCMCPU_IS_6338() || BCMCPU_IS_6348())
-               bcm63xx_regs_spi = bcm6348_regs_spi;
--      if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
-               bcm63xx_regs_spi = bcm6358_regs_spi;
- }
- #else
-@@ -87,7 +87,8 @@ int __init bcm63xx_spi_register(void)
-               spi_pdata.msg_ctl_width = SPI_6348_MSG_CTL_WIDTH;
-       }
--      if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-+      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6362() ||
-+              BCMCPU_IS_6368()) {
-               spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-               spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-               spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -84,7 +84,7 @@ static void enetx_set(struct clk *clk, i
-       else
-               clk_disable_unlocked(&clk_enet_misc);
--      if (BCMCPU_IS_6358()) {
-+      if (BCMCPU_IS_3368() || BCMCPU_IS_6358()) {
-               u32 mask;
-               if (clk->id == 0)
-@@ -110,9 +110,8 @@ static struct clk clk_enet1 = {
-  */
- static void ephy_set(struct clk *clk, int enable)
- {
--      if (!BCMCPU_IS_6358())
--              return;
--      bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
-+      if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
-+              bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable);
- }
-@@ -155,9 +154,10 @@ static struct clk clk_enetsw = {
-  */
- static void pcm_set(struct clk *clk, int enable)
- {
--      if (!BCMCPU_IS_6358())
--              return;
--      bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
-+      if (BCMCPU_IS_3368())
-+              bcm_hwclock_set(CKCTL_3368_PCM_EN, enable);
-+      if (BCMCPU_IS_6358())
-+              bcm_hwclock_set(CKCTL_6358_PCM_EN, enable);
- }
- static struct clk clk_pcm = {
-@@ -221,7 +221,7 @@ static void spi_set(struct clk *clk, int
-               mask = CKCTL_6338_SPI_EN;
-       else if (BCMCPU_IS_6348())
-               mask = CKCTL_6348_SPI_EN;
--      else if (BCMCPU_IS_6358())
-+      else if (BCMCPU_IS_3368() || BCMCPU_IS_6358())
-               mask = CKCTL_6358_SPI_EN;
-       else if (BCMCPU_IS_6362())
-               mask = CKCTL_6362_SPI_EN;
-@@ -370,7 +370,7 @@ struct clk *clk_get(struct device *dev,
-               return &clk_xtm;
-       if (!strcmp(id, "periph"))
-               return &clk_periph;
--      if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
-+      if ((BCMCPU_IS_3368() || BCMCPU_IS_6358()) && !strcmp(id, "pcm"))
-               return &clk_pcm;
-       if ((BCMCPU_IS_6362() || BCMCPU_IS_6368()) && !strcmp(id, "ipsec"))
-               return &clk_ipsec;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -102,6 +102,7 @@ static int __init bcm63xx_detect_flash_t
-               /* no way to auto detect so assume parallel */
-               bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
-               break;
-+      case BCM3368_CPU_ID:
-       case BCM6358_CPU_ID:
-               val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-               if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -266,7 +266,7 @@ static int __init bcm63xx_register_pci(v
-       /* setup PCI to local bus access, used by PCI device to target
-        * local RAM while bus mastering */
-       bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3);
--      if (BCMCPU_IS_6358() || BCMCPU_IS_6368())
-+      if (BCMCPU_IS_3368() || BCMCPU_IS_6358() || BCMCPU_IS_6368())
-               val = MPI_SP0_REMAP_ENABLE_MASK;
-       else
-               val = 0;
-@@ -338,6 +338,7 @@ static int __init bcm63xx_pci_init(void)
-       case BCM6328_CPU_ID:
-       case BCM6362_CPU_ID:
-               return bcm63xx_register_pcie();
-+      case BCM3368_CPU_ID:
-       case BCM6348_CPU_ID:
-       case BCM6358_CPU_ID:
-       case BCM6368_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.8/425-bcm933xx_hcs.patch b/target/linux/brcm63xx/patches-3.8/425-bcm933xx_hcs.patch
deleted file mode 100644 (file)
index 79533fb..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -37,6 +37,7 @@
- #include <pci_rt2x00_fixup.h>
- #include <uapi/linux/bcm963xx_tag.h>
-+#include <uapi/linux/bcm933xx_hcs.h>
- #define PFX   "board_bcm963xx: "
-@@ -45,6 +46,7 @@
- #define CFE_OFFSET_64K                        0x10000
- #define CFE_OFFSET_128K                       0x20000
-+#define HCS_OFFSET_128K                       0x20000
- static struct board_info board;
-@@ -782,8 +784,9 @@ void __init board_prom_init(void)
-       unsigned int i;
-       u8 *boot_addr, *cfe;
-       char cfe_version[32];
--      char *board_name;
-+      char *board_name = NULL;
-       u32 val;
-+      struct bcm_hcs *hcs;
-       /* read base address of boot chip select (0)
-        * 6328/6362 do not have MPI but boot from a fixed address
-@@ -812,9 +815,13 @@ void __init board_prom_init(void)
-       if (strcmp(cfe_version, "unknown") != 0) {
-               /* cfe present */
-               boardid_fixup(boot_addr);
-+
-+              board_name = bcm63xx_nvram_get_name();
-+      } else if (BCMCPU_IS_3368()) {
-+              hcs = (struct bcm_hcs *)KSEG1ADDR(0x1fc00000 + HCS_OFFSET_128K);
-+              board_name = hcs->filename;
-       }
--      board_name = bcm63xx_nvram_get_name();
-       /* find board by name */
-       for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-               if (strncmp(board_name, bcm963xx_boards[i]->name, 16))
---- /dev/null
-+++ b/include/uapi/linux/bcm933xx_hcs.h
-@@ -0,0 +1,18 @@
-+#ifndef __BCM_HCS_H
-+#define __BCM_HCS_H
-+
-+struct bcm_hcs {
-+      uint16_t magic;
-+      uint16_t control;
-+      uint16_t rev_maj;
-+      uint16_t rev_min;
-+      uint32_t build_date;
-+      uint32_t filelen;
-+      uint32_t ldaddress;
-+      char filename[64];
-+      uint16_t hcs;
-+      uint16_t her_znaet_chto;
-+      uint32_t crc;
-+};
-+
-+#endif /* __BCM_HCS */
diff --git a/target/linux/brcm63xx/patches-3.8/500-board-D4PW.patch b/target/linux/brcm63xx/patches-3.8/500-board-D4PW.patch
deleted file mode 100644 (file)
index 5db8c56..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -522,6 +522,56 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+      .name                           = "D-4P-W",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+      .has_uart0                      = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "D-4P-W:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "D-4P-W::status",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "D-4P-W:green:internet",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "D-4P-W:red:internet",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -696,6 +746,7 @@ static const struct board_info __initcon
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
-+      &board_96348_D4PW,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.8/501-board-NB4.patch
deleted file mode 100644 (file)
index 759ba43..0000000
+++ /dev/null
@@ -1,650 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -48,6 +50,12 @@
- #define CFE_OFFSET_128K                       0x20000
- #define HCS_OFFSET_128K                       0x20000
-+#define NB4_PID_OFFSET                0xff80
-+#define NB4_74X164_GPIO_BASE  64
-+#define NB4_SPI_GPIO_MOSI     7
-+#define NB4_SPI_GPIO_CLK      6
-+#define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
-+
- static struct board_info board;
- /*
-@@ -721,6 +729,596 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+
-+struct spi_gpio_platform_data nb4_spi_gpio_data = {
-+      .sck            = NB4_SPI_GPIO_CLK,
-+      .mosi           = NB4_SPI_GPIO_MOSI,
-+      .miso           = SPI_GPIO_NO_MISO,
-+      .num_chipselect = 1,
-+};
-+
-+
-+static struct platform_device nb4_spi_gpio = {
-+      .name = "spi_gpio",
-+      .id   = 1,
-+      .dev = {
-+              .platform_data = &nb4_spi_gpio_data,
-+      },
-+};
-+
-+static struct platform_device * __initdata nb4_devices[] = {
-+      &nb4_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
-+      .base = NB4_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info nb4_spi_devices[] = {
-+      {
-+              .modalias = "74x164",
-+              .max_speed_hz = 781000,
-+              .bus_num = 1,
-+              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+              .mode = SPI_MODE_0,
-+              .platform_data = &nb4_74x164_platform_data
-+      }
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+      .name                           = "NB4-SER-r0",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-SER-r0:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:red:service",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:green:service",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r0:blue:service",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+      .name                           = "NB4-SER-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-SER-r1:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:red:service",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:green:service",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r1:blue:service",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+      .name                           = "NB4-SER-r2",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-SER-r2:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:traffic",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:wifi",
-+                      .gpio           = 15,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:red:service",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:green:service",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-SER-r2:blue:service",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+      .name                           = "NB4-FXC-r1",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-FXC-r1:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:wifi",
-+                      .gpio           = 15,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:red:service",
-+                      .gpio           = 29,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:green:service",
-+                      .gpio           = 30,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r1:blue:service",
-+                      .gpio           = 4,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+      .name                           = "NB4-FXC-r2",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "NB4-FXC-r2:white:adsl",
-+                      .gpio           = NB4_74HC64_GPIO(4),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:tel",
-+                      .gpio           = NB4_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:tv",
-+                      .gpio           = NB4_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:wifi",
-+                      .gpio           = 15,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:white:alarm",
-+                      .gpio           = NB4_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:red:service",
-+                      .gpio           = 29,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:green:service",
-+                      .gpio           = 30,
-+              },
-+              {
-+                      .name           = "NB4-FXC-r2:blue:service",
-+                      .gpio           = 4,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 27,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "clip",
-+                      .gpio           = 31,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+      .devs = nb4_devices,
-+      .num_devs = ARRAY_SIZE(nb4_devices),
-+      .spis = nb4_spi_devices,
-+      .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
- #endif
- /*
-@@ -754,6 +1352,11 @@ static const struct board_info __initcon
-       &board_96358vw2,
-       &board_AGPFS0,
-       &board_DWVS0,
-+      &board_nb4_ser_r0,
-+      &board_nb4_ser_r1,
-+      &board_nb4_ser_r2,
-+      &board_nb4_fxc_r1,
-+      &board_nb4_fxc_r2,
- #endif
- };
-@@ -808,6 +1411,16 @@ static void __init boardid_fixup(u8 *boo
-       struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-       char *board_name = (char *)bcm63xx_nvram_get_name();
-+      if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
-+              u8 *p = boot_addr + NB4_PID_OFFSET;
-+
-+              /* Extract nb4 PID */
-+              if (!memcmp(p, "NB4-", 4)) {
-+                      memcpy(board_name, p, sizeof("NB4-XXX-rX"));
-+                      return;
-+              }
-+      }
-+
-       /* check if bcm_tag is at 64k offset */
-       if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-               /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.8/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.8/502-board-96338W2_E7T.patch
deleted file mode 100644 (file)
index c152d8f..0000000
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -193,6 +193,40 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+      .name                           = "96338W2_E7T",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+              .leds = {
-+              {
-+                      .name           = "96338W2_E7T:green:ppp",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96338W2_E7T:green:ppp-fail",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96338W2_E7T:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1331,6 +1365,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
-       &board_96338w,
-+      &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.8/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.8/503-board-CPVA642.patch
deleted file mode 100644 (file)
index 8770ef8..0000000
+++ /dev/null
@@ -1,109 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -720,6 +720,98 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_CPVA642 = {
-+      .name                           = "CPVA642",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "CPVA642:red:power",
-+                      .gpio           = 14,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:power",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "CPVA642:red:wifi",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:wifi",
-+                      .gpio           = 28,
-+                      .active_low     = 0,
-+              },
-+              {
-+                      .name           = "CPVA642:red:link",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:link",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:ether",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:phone1",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:phone2",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA642:green:usb",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+    },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 37,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
-       .name                           = "AGPF-S0",
-       .expected_cpu_id                = 0x6358,
-@@ -1386,6 +1478,7 @@ static const struct board_info __initcon
-       &board_96358vw,
-       &board_96358vw2,
-       &board_AGPFS0,
-+      &board_CPVA642,
-       &board_DWVS0,
-       &board_nb4_ser_r0,
-       &board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.8/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.8/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644 (file)
index 138e551..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -856,6 +856,61 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
- };
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+      .name                           = "AW4139",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "dsl-274xb:green:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "dsl-274xb:red:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:adsl",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:internet",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "dsl-274xb:red:internet",
-+                      .gpio           = 10,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- struct spi_gpio_platform_data nb4_spi_gpio_data = {
-       .sck            = NB4_SPI_GPIO_CLK,
-       .mosi           = NB4_SPI_GPIO_MOSI,
-@@ -1480,6 +1535,7 @@ static const struct board_info __initcon
-       &board_AGPFS0,
-       &board_CPVA642,
-       &board_DWVS0,
-+      &board_dsl_274xb_rev_c,
-       &board_nb4_ser_r0,
-       &board_nb4_ser_r1,
-       &board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.8/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.8/505-board_spw500v.patch
deleted file mode 100644 (file)
index 09f1876..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -614,6 +614,67 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_spw500v = {
-+      .name                           = "SPW500V",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .has_dsp                        = 1,
-+      .dsp = {
-+              .gpio_rst               = 6,
-+              .gpio_int               = 34,
-+              .ext_irq                = 2,
-+              .cs                     = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "SPW500V:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "SPW500V:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "SPW500V:green:ppp",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {       .name           = "SPW500V:green:pstn",
-+                      .gpio           = 28,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "SPW500V:green:voip",
-+                      .gpio           = 32,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1527,6 +1588,7 @@ static const struct board_info __initcon
-       &board_96348gw_a,
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-+      &board_spw500v,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.8/506-board_gw6200_gw6000.patch
deleted file mode 100644 (file)
index 4135247..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -481,6 +481,112 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_gw6200 = {
-+      .name                           = "GW6200",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .has_dsp                        = 1,
-+              .dsp = {
-+              .gpio_rst               = 8, /* FIXME: What is real GPIO here? */
-+              .gpio_int               = 34,
-+              .ext_irq                = 2,
-+              .cs                     = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "GW6200:green:line1",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "GW6200:green:line2",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "GW6200:green:line3",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "GW6200:green:tel",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+      .name                           = "GW6000",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .has_dsp                        = 1,
-+      .dsp = {
-+              .gpio_rst               = 6,
-+              .gpio_int               = 34,
-+              .ext_irq                = 2,
-+              .cs                     = 2,
-+      },
-+
-+      /* GW6000 has no GPIO-controlled leds */
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
-       .name                           = "F@ST2404",
-       .expected_cpu_id                = 0x6348,
-@@ -1581,6 +1687,8 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
-       &board_96348gw,
-+      &board_gw6000,
-+      &board_gw6200,
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.8/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.8/507-board-MAGIC.patch
deleted file mode 100644 (file)
index f7f65de..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -781,6 +781,78 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+      .name                           = "MAGIC",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              /* it has BP_ENET_EXTERNAL_PHY */
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_dsp                        = 1,
-+      .dsp = {
-+              .gpio_rst               = 25,
-+              .gpio_int               = 34,
-+              .cs                     = 2,
-+              .ext_irq                = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "MAGIC:green:voip",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:adsl",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:wifi",
-+                      .gpio           = 28,
-+              },
-+              {
-+                      .name           = "MAGIC:green:usb",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:hpna",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "MAGIC:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "MAGIC:green:stop",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1697,6 +1769,7 @@ static const struct board_info __initcon
-       &board_rta1025w_16,
-       &board_96348_D4PW,
-       &board_spw500v,
-+      &board_96348sv,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.8/508-board_hw553.patch
deleted file mode 100644 (file)
index b26fde6..0000000
+++ /dev/null
@@ -1,93 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1739,6 +1739,82 @@ static struct board_info __initdata boar
-       .spis = nb4_spi_devices,
-       .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+      .name                           = "HW553",
-+      .expected_cpu_id                = 0x6358,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "HW553:red:lan",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:blue:lan",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:adsl",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:blue:adsl",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+
-+              {
-+                      .name           = "HW553:blue:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:wifi",
-+                      .gpio           = 25,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:red:internetkey",
-+                      .gpio           = 12,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "HW553:blue:internetkey",
-+                      .gpio           = 13,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1784,6 +1860,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r2,
-       &board_nb4_fxc_r1,
-       &board_nb4_fxc_r2,
-+      &board_HW553,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.8/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.8/509-board_rta1320_16m.patch
deleted file mode 100644 (file)
index d91ad06..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -227,6 +227,45 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+      .name                           = "RTA1320_16M",
-+      .expected_cpu_id                = 0x6338,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+              .leds = {
-+              {
-+                      .name           = "RTA1320_16M:green:adsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA1320_16M:green:ppp",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA1320_16M:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "RTA1320_16M:green:stop",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1828,6 +1867,7 @@ static const struct board_info __initcon
-       &board_96338gw,
-       &board_96338w,
-       &board_96338w2_e7t,
-+      &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.8/510-board_spw303v.patch b/target/linux/brcm63xx/patches-3.8/510-board_spw303v.patch
deleted file mode 100644 (file)
index e659e9f..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1854,6 +1854,72 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+      .name                   = "96358-502V",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0              = 1,
-+      .has_enet0              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "spw303v:green:power+adsl",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:red:power+adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:ppp",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:ses",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:voip",
-+                      .gpio           = 27,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "spw303v:green:pots",
-+                      .gpio           = 31,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 11,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "ses",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      }
-+};
- #endif
- /*
-@@ -1901,6 +1967,7 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r1,
-       &board_nb4_fxc_r2,
-       &board_HW553,
-+      &board_spw303v,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.8/511-board_V2500V.patch
deleted file mode 100644 (file)
index 4a92185..0000000
+++ /dev/null
@@ -1,123 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -892,6 +892,65 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+      .name                           = "V2500V_BB",
-+        .expected_cpu_id                = 0x6348,
-+
-+        .has_uart0                      = 1,
-+        .has_enet0                      = 1,
-+        .has_enet1                      = 1,
-+        .has_pci                        = 1,
-+
-+        .enet0 = {
-+                .has_phy                = 1,
-+                .use_internal_phy       = 1,
-+        },
-+        .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+                .force_speed_100        = 1,
-+                .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "V2500V_BB:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "V2500V_BB:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2500V_BB:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {       .name           = "V2500V_BB:green:ppp",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2500V_BB:green:wireless",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 31,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -1952,6 +2011,7 @@ static const struct board_info __initcon
-       &board_96348_D4PW,
-       &board_spw500v,
-       &board_96348sv,
-+      &board_V2500V_BB,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -2073,6 +2133,22 @@ void __init board_prom_init(void)
-               val &= MPI_CSBASE_BASE_MASK;
-       }
-       boot_addr = (u8 *)KSEG1ADDR(val);
-+      printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+      /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+      /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+      /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+      /* Do an early check of CFE and then select bank 0 */
-+
-+      if (boot_addr == (u8 *)0xbf800000) {
-+              u8 *tmp_boot_addr = (u8*)0xbfc00000;
-+
-+              bcm63xx_nvram_init(tmp_boot_addr + BCM963XX_NVRAM_OFFSET);
-+              if (!strcmp(bcm63xx_nvram_get_name(), "V2500V_BB")) {
-+                      printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
-+                      boot_addr = tmp_boot_addr;
-+              }
-+      }
-       /* dump cfe version */
-       cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -19,6 +19,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_hsspi.h>
-@@ -158,6 +159,13 @@ int __init bcm63xx_flash_register(int nu
-               val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-               val &= MPI_CSBASE_BASE_MASK;
-+              /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+              /* Loading from CFE always uses Bank 0 */
-+              if (!strcmp(board_get_name(), "V2500V_BB")) {
-+                      pr_info("V2500V: Start in Bank 0\n");
-+                      val = val + 0x400000; // Select Bank 0 start address
-+              }
-+
-               mtd_resources[0].start = val;
-               mtd_resources[0].end = 0x1FFFFFFF;
diff --git a/target/linux/brcm63xx/patches-3.8/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.8/512-board_BTV2110.patch
deleted file mode 100644 (file)
index a20503e..0000000
+++ /dev/null
@@ -1,75 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -452,6 +452,64 @@ static struct board_info __initdata boar
-       },
- };
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+      .name                           = "V2110",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "V2110:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "V2110:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2110:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {       .name           = "V2110:green:ppp",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "V2110:green:wireless",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -2012,6 +2070,7 @@ static const struct board_info __initcon
-       &board_spw500v,
-       &board_96348sv,
-       &board_V2500V_BB,
-+      &board_V2110,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/513-board_livebox.patch b/target/linux/brcm63xx/patches-3.8/513-board_livebox.patch
deleted file mode 100644 (file)
index 2323b5e..0000000
+++ /dev/null
@@ -1,390 +0,0 @@
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
-       select SSB
-        help
-+config BOARD_LIVEBOX
-+      bool "Inventel Livebox(es) boards"
-+      select SSB
-+      help
-+       Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1 +1,2 @@
- obj-$(CONFIG_BOARD_BCM963XX)          += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX)           += board_livebox.o
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,369 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License.  See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX   "board_livebox: "
-+
-+#define LIVEBOX_KEYS_POLL_INTERVAL    20
-+#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL        (LIVEBOX_KEYS_POLL_INTERVAL * 3)
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+      .name                           = "Livebox-blue-5g",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .enet1 = {
-+                .has_phy              = 1,
-+                .phy_id               = 31,
-+      },
-+
-+      .has_ohci0                      = 1,
-+      .has_pccard                     = 1,
-+
-+      .has_dsp                        = 0, /*TODO some Liveboxes have dsp*/
-+      .dsp = {
-+              .gpio_rst               = 6, /*FIXME eth1 shares gpio6 with dsp?*/
-+              .gpio_int               = 35,
-+              .cs                     = 2,
-+              .ext_irq                = 2,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "Livebox-blue-5g::adsl-fail",
-+                      .gpio           = 0,
-+                      .active_low     = 0,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::adsl",
-+                      .gpio           = 1,
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::traffic",
-+                      .gpio           = 2,
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::phone",
-+                      .gpio           = 3,
-+              },
-+              {
-+                      .name           = "Livebox-blue-5g::wifi",
-+                      .gpio           = 4,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "BTN_1",
-+                      .gpio           = 36,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_1,
-+                      .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "BTN_2",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_2,
-+                      .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+
-+      },
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+      &board_livebox_blue5g
-+#endif
-+};
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+      return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int board_get_mac_address(u8 *mac)
-+{
-+      u8 *p;
-+      int count;
-+
-+      memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+      p = mac + ETH_ALEN - 1;
-+      count = mac_addr_used;
-+
-+      while (count--) {
-+              do {
-+                      (*p)++;
-+                      if (*p != 0)
-+                              break;
-+                      p--;
-+              } while (p != mac);
-+      }
-+
-+      if (p == mac) {
-+              printk(KERN_ERR PFX "unable to fetch mac address\n");
-+              return -ENODEV;
-+      }
-+        mac_addr_used++;
-+
-+      return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK      0x000000ff
-+#define LIVEBOX_BOOT_ADDR             0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9           0x90
-+
-+void __init board_prom_init(void)
-+{
-+      u32 val;
-+      u8 hw_version;
-+
-+      /* Get hardware version */
-+      val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+      val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+      bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+      hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
-+      switch (hw_version) {
-+      case LIVEBOX_HW_BLUE5G_9:
-+              printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+              memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+              break;
-+      default:
-+              printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
-+              break;
-+      }
-+
-+      /* use default livebox configuration */
-+      memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+      /* setup pin multiplexing depending on board enabled device,
-+       * this has to be done this early since PCI init is done
-+       * inside arch_initcall */
-+      val = 0;
-+
-+#ifdef CONFIG_PCI
-+      if (board.has_pci) {
-+              bcm63xx_pci_enabled = 1;
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G2_PCI;
-+      }
-+#endif
-+      if (board.has_pccard) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+      }
-+
-+      if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+      }
-+
-+      if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+              if (BCMCPU_IS_6348())
-+                      val |= GPIO_MODE_6348_G3_EXT_MII |
-+                              GPIO_MODE_6348_G0_EXT_MII;
-+                      printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
-+                      gpio_request(6, "dsp_eth_rst");
-+                      gpio_direction_output(6, 0);
-+                      gpio_set_value(6, 1);
-+      }
-+
-+      bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+      if (!board.name[0])
-+              panic("unable to detect bcm963xx board");
-+      printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+      /* make sure we're running on expected cpu */
-+      if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+              panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct physmap_flash_data flash_data = {
-+      .width                  = 2,
-+};
-+
-+static struct resource mtd_resources[] = {
-+      {
-+              .start          = 0,    /* filled at runtime */
-+              .end            = 0,    /* filled at runtime */
-+              .flags          = IORESOURCE_MEM,
-+      }
-+};
-+
-+static struct platform_device mtd_dev = {
-+      .name                   = "physmap-flash",
-+      .resource               = mtd_resources,
-+      .num_resources          = ARRAY_SIZE(mtd_resources),
-+      .dev                    = {
-+              .platform_data  = &flash_data,
-+      },
-+};
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+      .name                   = "leds-gpio",
-+      .id                     = 0,
-+      .dev.platform_data      = &bcm63xx_led_data,
-+};
-+
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+      .poll_interval  = LIVEBOX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+      .name           = "gpio-keys-polled",
-+      .id             = 0,
-+      .dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+      u32 val;
-+      int led_count = 0;
-+      int button_count = 0;
-+
-+      if (board.has_uart0)
-+              bcm63xx_uart_register(0);
-+
-+      if (board.has_uart1)
-+              bcm63xx_uart_register(1);
-+
-+      if (board.has_pccard)
-+              bcm63xx_pcmcia_register();
-+
-+      if (board.has_enet0 &&
-+          !board_get_mac_address(board.enet0.mac_addr))
-+              bcm63xx_enet_register(0, &board.enet0);
-+
-+      if (board.has_enet1 &&
-+          !board_get_mac_address(board.enet1.mac_addr))
-+              bcm63xx_enet_register(1, &board.enet1);
-+
-+      if (board.has_ehci0)
-+              bcm63xx_ehci_register();
-+
-+      if (board.has_ohci0)
-+              bcm63xx_ohci_register();
-+
-+      if (board.has_dsp)
-+              bcm63xx_dsp_register(&board.dsp);
-+
-+      bcm63xx_spi_register();
-+
-+      if (board.num_devs)
-+              platform_add_devices(board.devs, board.num_devs);
-+
-+      if (board.num_spis)
-+              spi_register_board_info(board.spis, board.num_spis);
-+
-+
-+      /* read base address of boot chip select (0) */
-+      val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+      val &= MPI_CSBASE_BASE_MASK;
-+      if (val != LIVEBOX_BOOT_ADDR)
-+              printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+                      val, LIVEBOX_BOOT_ADDR);
-+      mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
-+      mtd_resources[0].end = 0x1ebfffff;
-+
-+      platform_device_register(&mtd_dev);
-+
-+      /* count number of LEDs defined by this device */
-+      while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+              led_count++;
-+
-+      bcm63xx_led_data.num_leds = led_count;
-+      bcm63xx_led_data.leds = board.leds;
-+
-+      platform_device_register(&bcm63xx_gpio_leds);
-+
-+      /* count number of BUTTONs defined by this device */
-+      while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+              button_count++;
-+
-+      if (button_count) {
-+              bcm63xx_gpio_keys_data.nbuttons = button_count;
-+              bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+              platform_device_register(&bcm63xx_gpio_keys_device);
-+      }
-+
-+      return 0;
-+}
diff --git a/target/linux/brcm63xx/patches-3.8/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.8/514-board_ct536_ct5621.patch
deleted file mode 100644 (file)
index 2a4d83b..0000000
+++ /dev/null
@@ -1,62 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -510,6 +510,51 @@ static struct board_info __initdata boar
- };
-+static struct board_info __initdata board_ct536_ct5621 = {
-+      .name                           = "CT536_CT5621",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 0,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_pccard = 1,
-+      .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "CT536_CT5621:green:adsl-fail",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT536_CT5621:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -2071,6 +2116,7 @@ static const struct board_info __initcon
-       &board_96348sv,
-       &board_V2500V_BB,
-       &board_V2110,
-+      &board_ct536_ct5621,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.8/515-board_DWV-S0_fixes.patch
deleted file mode 100644 (file)
index b2a1714..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1279,6 +1279,8 @@ static struct board_info __initdata boar
-       .name                           = "DWV-S0",
-       .expected_cpu_id                = 0x6358,
-+      .has_uart0                      = 1,
-+
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
-@@ -1294,6 +1296,7 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.8/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.8/516-board_96348A-122.patch
deleted file mode 100644 (file)
index b0900de..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -555,6 +555,69 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96348A_122 = {
-+      .name                           = "96348A-122",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "96348A-122:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96348A-122:red:alarm",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348A-122:green:wps",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 33,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wlan",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WLAN,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_96348gw = {
-       .name                           = "96348GW",
-       .expected_cpu_id                = 0x6348,
-@@ -2120,6 +2183,7 @@ static const struct board_info __initcon
-       &board_V2500V_BB,
-       &board_V2110,
-       &board_ct536_ct5621,
-+      &board_96348A_122,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/517-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.8/517-RTA1205W_16_uart_fixes.patch
deleted file mode 100644 (file)
index 4c22d7b..0000000
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -820,6 +820,7 @@ static struct board_info __initdata boar
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-+      .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .has_enet1                      = 1,
-       .has_pci                        = 1,
diff --git a/target/linux/brcm63xx/patches-3.8/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.8/519_board_CPVA502plus.patch
deleted file mode 100644 (file)
index 5ca2376..0000000
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1118,6 +1118,46 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_CPVA502plus = {
-+      .name                           = "CPVA502+",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "CPVA502+:green:phone",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA502+:green:link",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+              },
-+      },
-+};
-+
- #endif
- /*
-@@ -2185,6 +2225,7 @@ static const struct board_info __initcon
-       &board_V2110,
-       &board_ct536_ct5621,
-       &board_96348A_122,
-+      &board_CPVA502plus,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.8/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644 (file)
index bb42133..0000000
+++ /dev/null
@@ -1,128 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c          |   95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h |    2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2192,6 +2192,78 @@ static struct board_info __initdata boar
- #endif
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+      .name                           = "96368MVWG",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port1",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port2",
-+                      },
-+
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0x12,
-+                              .name   = "port0",
-+                      },
-+
-+                      [5] = {
-+                              .used   = 1,
-+                              .phy_id = 0x11,
-+                              .name   = "port3",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "96368MVWG:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVWG:green:ppp",
-+                      .gpio           = 5,
-+              },
-+              {
-+                      .name           = "96368MVWG:green:power",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96368MVWG:green:wps",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVWG:green:ppp-fail",
-+                      .gpio           = 31,
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
-+#endif
-+
-+/*
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-@@ -2243,6 +2315,10 @@ static const struct board_info __initcon
-       &board_HW553,
-       &board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+      &board_96368mvwg,
-+#endif
- };
- /*
-@@ -2416,12 +2492,25 @@ void __init board_prom_init(void)
-               bcm63xx_pci_enabled = 1;
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G2_PCI;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCI_REQ1 |
-+                              GPIO_MODE_6368_PCI_GNT1 |
-+                              GPIO_MODE_6368_PCI_INTB |
-+                              GPIO_MODE_6368_PCI_REQ0 |
-+                              GPIO_MODE_6368_PCI_GNT0;
-       }
- #endif
-       if (board.has_pccard) {
-               if (BCMCPU_IS_6348())
-                       val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+              if (BCMCPU_IS_6368())
-+                      val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+                              GPIO_MODE_6368_PCMCIA_CD2 |
-+                              GPIO_MODE_6368_PCMCIA_VS1 |
-+                              GPIO_MODE_6368_PCMCIA_VS2;
-       }
-       if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-3.8/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-3.8/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644 (file)
index c956dbb..0000000
+++ /dev/null
@@ -1,92 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2261,6 +2261,72 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+      .name                           = "96368MVNgr",
-+      .expected_cpu_id                = 0x6368,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "port1",
-+                      },
-+
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "port2",
-+                      },
-+
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "port3",
-+                      },
-+
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "port4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "96368MVNgr:green:adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:inet",
-+                      .gpio           = 5,
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:power",
-+                      .gpio           = 22,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:wps",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96368MVNgr:green:inet-fail",
-+                      .gpio           = 3,
-+              },
-+      },
-+
-+      .has_ohci0 = 1,
-+      .has_ehci0 = 1,
-+};
- #endif
- /*
-@@ -2318,6 +2384,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-+      &board_96368mvngr,
- #endif
- };
diff --git a/target/linux/brcm63xx/patches-3.8/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-3.8/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644 (file)
index 735fdba..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -75,13 +75,45 @@ static struct board_info __initdata boar
-               .port_no                = 0,
-       },
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-       .leds = {
-               {
--                      .name           = "96328avng::ppp-fail",
-+                      .name           = "96328avng::internet-fail",
-                       .gpio           = 2,
-                       .active_low     = 1,
-               },
-               {
-+                      .name           = "96328avng::dsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-                       .name           = "96328avng::power",
-                       .gpio           = 4,
-                       .active_low     = 1,
-@@ -98,7 +130,7 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-               {
--                      .name           = "96328avng::ppp",
-+                      .name           = "96328avng::internet",
-                       .gpio           = 11,
-                       .active_low     = 1,
-               },
diff --git a/target/linux/brcm63xx/patches-3.8/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-3.8/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644 (file)
index c5cd05c..0000000
+++ /dev/null
@@ -1,96 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |   71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -136,6 +136,76 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+      .name                           = "963281TAN",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "963281TAN::internet",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "963281TAN::internet-fail",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::power-fail",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::wps",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "963281TAN::dsl",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+
-+      },
-+};
- #endif
- /*
-@@ -2367,6 +2437,7 @@ static struct board_info __initdata boar
- static const struct board_info __initconst *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.8/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.8/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644 (file)
index 10e76fb..0000000
+++ /dev/null
@@ -1,132 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c |  104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -206,6 +206,111 @@ static struct board_info __initdata boar
-       },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+      .name                           = "AW4339U",
-+      .expected_cpu_id                = 0x6328,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .has_caldata                    = 1,
-+      .caldata = {
-+              {
-+                      .vendor         = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset = 0x7d1000,
-+                      .slot           = 0,
-+                      .led_pin        = -1,
-+              },
-+      },
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used   = 1,
-+                              .phy_id = 1,
-+                              .name   = "Port 4",
-+                      },
-+                      [1] = {
-+                              .used   = 1,
-+                              .phy_id = 2,
-+                              .name   = "Port 3",
-+                      },
-+                      [2] = {
-+                              .used   = 1,
-+                              .phy_id = 3,
-+                              .name   = "Port 2",
-+                      },
-+                      [3] = {
-+                              .used   = 1,
-+                              .phy_id = 4,
-+                              .name   = "Port 1",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "dsl-274xb:red:internet",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:dsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "dsl-274xb:red:power",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:blue:wps",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "dsl-274xb:green:internet",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "wifi",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 24,
-+                      .active_low     = 1,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -2438,6 +2543,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
-       &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.8/525-board_96348w3.patch b/target/linux/brcm63xx/patches-3.8/525-board_96348w3.patch
deleted file mode 100644 (file)
index a6af6be..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1365,6 +1365,59 @@ static struct board_info __initdata boar
-       },
- };
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+      .name                           = "96348W3",
-+      .expected_cpu_id                = 0x6348,
-+
-+      .has_uart0                      = 1,
-+      .has_enet1                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .has_ohci0                      = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "96348W3:green:power",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "96348W3:red:power",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348W3::adsl",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348W3::internet",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+      },
-+      .buttons = {
-+                      {
-+                      .desc           = "reset",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      },
-+      },
-+};
-+
- #endif
- /*
-@@ -2573,6 +2626,7 @@ static const struct board_info __initcon
-       &board_ct536_ct5621,
-       &board_96348A_122,
-       &board_CPVA502plus,
-+      &board_96348W3,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.8/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.8/526-board_CT6373-1.patch
deleted file mode 100644 (file)
index c9b7bb7..0000000
+++ /dev/null
@@ -1,138 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -56,6 +56,13 @@
- #define NB4_SPI_GPIO_CLK      6
- #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
-+#define CT6373_PID_OFFSET             0xff80
-+#define CT6373_74X164_GPIO_BASE       64
-+#define CT6373_SPI_GPIO_MOSI  7
-+#define CT6373_SPI_GPIO_CLK           6
-+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
-+
-+
- static struct board_info board;
- /*
-@@ -2308,6 +2315,113 @@ static struct board_info __initdata boar
-       .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
-+      .sck            = CT6373_SPI_GPIO_CLK,
-+      .mosi           = CT6373_SPI_GPIO_MOSI,
-+      .miso           = SPI_GPIO_NO_MISO,
-+      .num_chipselect = 1,
-+};
-+
-+static struct platform_device ct6373_spi_gpio = {
-+      .name = "spi_gpio",
-+      .id   = 1,
-+      .dev = {
-+              .platform_data = &ct6373_spi_gpio_data,
-+      },
-+};
-+
-+static struct platform_device * __initdata ct6373_devices[] = {
-+      &ct6373_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
-+      .base = CT6373_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info ct6373_spi_devices[] = {
-+      {
-+              .modalias = "74x164",
-+              .max_speed_hz = 781000,
-+              .bus_num = 1,
-+              .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+              .mode = SPI_MODE_0,
-+              .platform_data = &ct6373_74x164_platform_data
-+      }
-+};
-+
-+static struct board_info __initdata board_ct6373_1 = {
-+      .name                           = "CT6373-1",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0                      = 1,
-+      .has_pci                        = 1,
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enet1                      = 1,
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "CT6373-1:green:power",
-+                      .gpio           = 0,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "CT6373-1:green:usb",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:wlan",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:adsl",
-+                      .gpio           = CT6373_74HC64_GPIO(0),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:line",
-+                      .gpio           = CT6373_74HC64_GPIO(1),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:fxs1",
-+                      .gpio           = CT6373_74HC64_GPIO(2),
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "CT6373-1:green:fxs2",
-+                      .gpio           = CT6373_74HC64_GPIO(3),
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 35,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+
-+      .devs = ct6373_devices,
-+      .num_devs = ARRAY_SIZE(ct6373_devices),
-+      .spis = ct6373_spi_devices,
-+      .num_spis = ARRAY_SIZE(ct6373_spi_devices),
-+};
-+
- static struct board_info __initdata board_HW553 = {
-       .name                           = "HW553",
-       .expected_cpu_id                = 0x6358,
-@@ -2641,6 +2755,7 @@ static const struct board_info __initcon
-       &board_nb4_ser_r2,
-       &board_nb4_fxc_r1,
-       &board_nb4_fxc_r2,
-+      &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
- #endif
diff --git a/target/linux/brcm63xx/patches-3.8/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.8/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644 (file)
index 1760db5..0000000
+++ /dev/null
@@ -1,84 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2563,6 +2563,73 @@ static struct board_info __initdata boar
-               },
-       }
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+      .name                   = "DVAG3810BN",
-+      .expected_cpu_id        = 0x6358,
-+
-+      .has_uart0              = 1,
-+      .has_enet0              = 1,
-+      .has_enet1              = 1,
-+      .has_pci                = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 0,
-+              .use_internal_phy       = 1,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+
-+      .has_ohci0              = 1,
-+      .has_pccard             = 1,
-+      .has_ehci0              = 1,
-+
-+      .leds = {
-+              {
-+                      .name   = "DVAG3810BN::voip",
-+                      .gpio   = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::dsl",
-+                      .gpio   = 22,
-+                      .active_low  = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::internet",
-+                      .gpio   = 23,
-+                      .active_low  = 1,
-+              },
-+              {
-+                      .name   = "DVAG3810BN::power",
-+                      .gpio   = 4,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name   = "DVAG3810BN::stop",
-+                      .gpio   = 5,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc   = "reset",
-+                      .gpio   = 34,
-+                      .active_low = 1,
-+                      .type   = EV_KEY,
-+                      .code   = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -2758,6 +2825,7 @@ static const struct board_info __initcon
-       &board_ct6373_1,
-       &board_HW553,
-       &board_spw303v,
-+      &board_DVAG3810BN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.8/528-board_nb6.patch b/target/linux/brcm63xx/patches-3.8/528-board_nb6.patch
deleted file mode 100644 (file)
index b352b73..0000000
+++ /dev/null
@@ -1,146 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-+#include <linux/rtl8367.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -55,6 +56,8 @@
- #define NB4_SPI_GPIO_MOSI     7
- #define NB4_SPI_GPIO_CLK      6
- #define NB4_74HC64_GPIO(X)    (NB4_74X164_GPIO_BASE + (X))
-+#define NB6_GPIO_RTL8367_SDA  18
-+#define NB6_GPIO_RTL8367_SCK  20
- #define CT6373_PID_OFFSET             0xff80
- #define CT6373_74X164_GPIO_BASE       64
-@@ -2632,6 +2635,103 @@ static struct board_info __initdata boar
- };
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
-+      .mode = RTL8367_EXTIF_MODE_RGMII,
-+      .txdelay = 1,
-+      .rxdelay = 5,
-+      .ability = {
-+              .force_mode = 1,
-+              .txpause = 1,
-+              .rxpause = 1,
-+              .link = 1,
-+              .duplex = 1,
-+              .speed = RTL8367_PORT_SPEED_1000,
-+      },
-+};
-+
-+static struct rtl8367_platform_data nb6_rtl8367_data = {
-+      .gpio_sda       = NB6_GPIO_RTL8367_SDA,
-+      .gpio_sck       = NB6_GPIO_RTL8367_SCK,
-+      .extif0_cfg     = &nb6_rtl8367_extif0_cfg,
-+};
-+
-+static struct platform_device nb6_rtl8367_device = {
-+      .name           = RTL8367_DRIVER_NAME,
-+      .id             = -1,
-+      .dev = {
-+              .platform_data  = &nb6_rtl8367_data,
-+      }
-+};
-+
-+static struct platform_device * __initdata nb6_devices[] = {
-+      &nb6_rtl8367_device,
-+};
-+
-+static struct board_info __initdata board_nb6 = {
-+      .name                           = "NB6",
-+      .expected_cpu_id                = 0x6362,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_ohci0                      = 1,
-+      .has_ehci0                      = 1,
-+
-+      .has_enetsw                     = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [4] = {
-+                              .used   = 1,
-+                              .phy_id = 0xff,
-+                              .bypass_link = 1,
-+                              .force_speed = 1000,
-+                              .force_duplex_full = 1,
-+                              .name   = "RGMII",
-+                      },
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 24,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 25,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "wlan",
-+                      .gpio           = 12,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WLAN,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .desc           = "service",
-+                      .gpio           = 10,
-+                      .type           = EV_KEY,
-+                      .code           = BTN_0,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .devs = nb6_devices,
-+      .num_devs = ARRAY_SIZE(nb6_devices),
-+};
-+#endif
-+
- /*
-  * known 6368 boards
-  */
-@@ -2828,6 +2928,10 @@ static const struct board_info __initcon
-       &board_DVAG3810BN,
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+      &board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
-       &board_96368mvwg,
-       &board_96368mvngr,
-@@ -2895,6 +2999,11 @@ static void __init boardid_fixup(u8 *boo
-               }
-       }
-+      if (BCMCPU_IS_6362() && (!strncmp(board_name, "NB6-", sizeof("NB6-") - 1))) {
-+              board_name[sizeof("NB6") - 1] = '\0';
-+              return ;
-+      }
-+
-       /* check if bcm_tag is at 64k offset */
-       if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
-               /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.8/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.8/529-board_fast2604.patch
deleted file mode 100644 (file)
index 9417bdf..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1033,6 +1033,57 @@ static struct board_info __initdata boar
-       .has_ehci0                      = 1,
- };
-+static struct board_info __initdata board_FAST2604 = {
-+      .name                                           = "F@ST2604",
-+      .expected_cpu_id                        = 0x6348,
-+
-+      .has_uart0                                      = 1,
-+      .has_pci                                        = 1,
-+      .has_ohci0                                      = 1,
-+
-+      .has_enet1                                      = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                           = "F@ST2604:green:power",
-+                      .gpio                           = 0,
-+                      .active_low                     = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                           = "F@ST2604:red:power",
-+                      .gpio                           = 1,
-+                      .active_low                     = 1,
-+              },
-+              {
-+                      .name                           = "F@ST2604:red:inet",
-+                      .gpio                           = 4,
-+                      .active_low                     = 1,
-+              },
-+              {
-+                      .name                           = "F@ST2604:green:wps",
-+                      .gpio                           = 5,
-+                      .active_low                     = 1,
-+              },
-+      },
-+      .buttons = {
-+              {
-+                      .desc                           = "reset",
-+                      .gpio                           = 33,
-+                      .active_low                     = 1,
-+                      .type                           = EV_KEY,
-+                      .code                           = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
-       .name                           = "RTA1025W_16",
-       .expected_cpu_id                = 0x6348,
-@@ -2896,6 +2947,7 @@ static const struct board_info __initcon
-       &board_96348gw_10,
-       &board_96348gw_11,
-       &board_FAST2404,
-+      &board_FAST2604,
-       &board_DV201AMR,
-       &board_96348gw_a,
-       &board_rta1025w_16,
diff --git a/target/linux/brcm63xx/patches-3.8/530-board_963281T_TEF.patch b/target/linux/brcm63xx/patches-3.8/530-board_963281T_TEF.patch
deleted file mode 100644 (file)
index 22cbd57..0000000
+++ /dev/null
@@ -1,136 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -217,6 +217,125 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_963281T_TEF = {
-+      .name                                   = "963281T_TEF",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "963281T_TEF:green:power",
-+                      .gpio                   = 4,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:power",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:inet",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:inet",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:ppp",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:ppp",
-+                      .gpio                   = 5,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:3g",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:3g",
-+                      .gpio                   = 7,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:wlan",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:green:eth",
-+                      .gpio                   = 31,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "963281T_TEF:red:eth",
-+                      .gpio                   = 20,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 24,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
-       .name                           = "AW4339U",
-       .expected_cpu_id                = 0x6328,
-@@ -2928,6 +3047,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_963281TAN,
-+      &board_963281T_TEF,
-       &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.8/531-board_96328A-1441N1.patch b/target/linux/brcm63xx/patches-3.8/531-board_96328A-1441N1.patch
deleted file mode 100644 (file)
index 3b10795..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -147,6 +147,78 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96328A_1441N1 = {
-+      .name                                   = "96328A-1441N1",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "96328A-1441N1:green:power",
-+                      .gpio                   = 8,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:red:power",
-+                      .gpio                   = 4,
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:green:inet",
-+                      .gpio                   = 7,
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:red:inet",
-+                      .gpio                   = 1,
-+              },
-+              {
-+                      .name                   = "96328A-1441N1:green:dsl",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
-       .name                           = "963281TAN",
-       .expected_cpu_id                = 0x6328,
-@@ -3046,6 +3118,7 @@ static struct board_info __initdata boar
- static const struct board_info __initconst *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_96328A_1441N1,
-       &board_963281TAN,
-       &board_963281T_TEF,
-       &board_dsl_274xb_f1,
diff --git a/target/linux/brcm63xx/patches-3.8/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.8/532-board_96328a-1241N.patch
deleted file mode 100644 (file)
index fb4bc3f..0000000
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -147,6 +147,72 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_96328A_1241N = {
-+      .name                                   = "96328A-1241N",
-+      .expected_cpu_id                        = 0x6328,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+      .has_enetsw                             = 1,
-+
-+      .enetsw = {
-+              .used_ports = {
-+                      [0] = {
-+                              .used           = 1,
-+                              .phy_id         = 1,
-+                              .name           = "Port 1",
-+                      },
-+                      [1] = {
-+                              .used           = 1,
-+                              .phy_id         = 2,
-+                              .name           = "Port 2",
-+                      },
-+                      [2] = {
-+                              .used           = 1,
-+                              .phy_id         = 3,
-+                              .name           = "Port 3",
-+                      },
-+                      [3] = {
-+                              .used           = 1,
-+                              .phy_id         = 4,
-+                              .name           = "Port 4",
-+                      },
-+              },
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "96328A-1241N:green:power",
-+                      .gpio                   = 4,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "96328A-1241N:red:alarm",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "96328A-1241N:green:inet",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 23,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
- static struct board_info __initdata board_96328A_1441N1 = {
-       .name                                   = "96328A-1441N1",
-       .expected_cpu_id                        = 0x6328,
-@@ -3118,6 +3184,7 @@ static struct board_info __initdata boar
- static const struct board_info __initconst *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-+      &board_96328A_1241N,
-       &board_96328A_1441N1,
-       &board_963281TAN,
-       &board_963281T_TEF,
diff --git a/target/linux/brcm63xx/patches-3.8/533-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.8/533-board_rta770bw.patch
deleted file mode 100644 (file)
index 37586a3..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -752,6 +752,55 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+      .name                           = "RTA770BW",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "RTA770BW:green:usb",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770BW:green:adsl",
-+                      .gpio           = 8,
-+              },
-+              {
-+                      .name           = "RTA770BW:green:diag",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770BW:green:wlan",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 13,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -3198,6 +3247,7 @@ static const struct board_info __initcon
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-+      &board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.8/534-board_hw556.patch b/target/linux/brcm63xx/patches-3.8/534-board_hw556.patch
deleted file mode 100644 (file)
index 4ef9b28..0000000
+++ /dev/null
@@ -1,447 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2858,6 +2858,374 @@ static struct board_info __initdata boar
-       },
- };
-+static struct board_info __initdata board_HW556 = {
-+      .name                                   = "HW556",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .caldata_offset         = 0xe00000,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+static struct board_info __initdata board_HW556_A = {
-+      .name                                   = "HW556_A",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_RALINK,
-+                      .caldata_offset         = 0xeffe00,
-+                      .slot                   = 1,
-+                      .eeprom                 = "rt2x00.eeprom",
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+static struct board_info __initdata board_HW556_B = {
-+      .name                                   = "HW556_B",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xf7e000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+static struct board_info __initdata board_HW556_C = {
-+      .name                                   = "HW556_C",
-+      .expected_cpu_id                        = 0x6358,
-+
-+      .has_uart0                              = 1,
-+      .has_pci                                = 1,
-+      .has_ohci0                              = 1,
-+      .has_ehci0                              = 1,
-+
-+      .has_caldata                            = 1,
-+      .caldata = {
-+              {
-+                      .vendor                 = PCI_VENDOR_ID_ATHEROS,
-+                      .caldata_offset         = 0xefe000,
-+                      .slot                   = 1,
-+                      .endian_check           = 1,
-+                      .led_pin                = 2,
-+              },
-+      },
-+
-+      .has_enet1                              = 1,
-+      .enet1 = {
-+              .has_phy                        = 1,
-+              .phy_id                         = 0,
-+              .force_speed_100                = 1,
-+              .force_duplex_full              = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name                   = "HW556:red:message",
-+                      .gpio                   = 0,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:hspa",
-+                      .gpio                   = 1,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:dsl",
-+                      .gpio                   = 2,
-+                      .active_low             = 1,
-+              },
-+              {
-+                      .name                   = "HW556:red:power",
-+                      .gpio                   = 3,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+              {
-+                      .name                   = "HW556:red:all",
-+                      .gpio                   = 6,
-+                      .active_low             = 1,
-+                      .default_trigger        = "default-on",
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc                   = "help",
-+                      .gpio                   = 8,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_HELP,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "wlan",
-+                      .gpio                   = 9,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_WLAN,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "restart",
-+                      .gpio                   = 10,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_RESTART,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc                   = "reset",
-+                      .gpio                   = 11,
-+                      .active_low             = 1,
-+                      .type                   = EV_KEY,
-+                      .code                   = KEY_CONFIG,
-+                      .debounce_interval      = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
-+
-  /* T-Home Speedport W 303V Typ B */
- static struct board_info __initdata board_spw303v = {
-       .name                   = "96358-502V",
-@@ -3286,6 +3654,10 @@ static const struct board_info __initcon
-       &board_nb4_fxc_r2,
-       &board_ct6373_1,
-       &board_HW553,
-+      &board_HW556,
-+      &board_HW556_A,
-+      &board_HW556_B,
-+      &board_HW556_C,
-       &board_spw303v,
-       &board_DVAG3810BN,
- #endif
-@@ -3351,13 +3723,37 @@ static void __init boardid_fixup(u8 *boo
-       struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-       char *board_name = (char *)bcm63xx_nvram_get_name();
--      if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
--              u8 *p = boot_addr + NB4_PID_OFFSET;
--
--              /* Extract nb4 PID */
--              if (!memcmp(p, "NB4-", 4)) {
--                      memcpy(board_name, p, sizeof("NB4-XXX-rX"));
--                      return;
-+      if (BCMCPU_IS_6358()) {
-+              if (!strcmp(board_name, "96358VW")) {
-+                      u8 *p = boot_addr + NB4_PID_OFFSET;
-+
-+                      /* Extract nb4 PID */
-+                      if (!memcmp(p, "NB4-", 4)) {
-+                              memcpy(board_name, p, sizeof("NB4-XXX-rX"));
-+                              return;
-+                      }
-+              } else if (!strcmp(board_name, "HW556")) {
-+                      /*
-+                       * HW556 has different wlan caldatas depending on
-+                       * hardware version.
-+                       * Detect hardware version and change board id
-+                       */
-+                      u8 cal_data_ath9k[4] = { 0xa5, 0x5a, 0, 0 };
-+                      u8 cal_data_rt3062[4] = { 0x62, 0x30, 1, 0 };
-+
-+                      if (!memcmp(boot_addr + 0xeffe00,
-+                                  &cal_data_rt3062, 4)) {
-+                              /* Ralink 0xeffe00 */
-+                              memcpy(board_name, "HW556_A", 7);
-+                      } else if (!memcmp(boot_addr + 0xf7e000,
-+                                         &cal_data_ath9k, 4)) {
-+                              /* Atheros 0xf7e000 */
-+                              memcpy(board_name, "HW556_B", 7);
-+                      } else if (!memcmp(boot_addr + 0xefe000,
-+                                         &cal_data_ath9k, 4)) {
-+                              /* Atheros 0xefe000 */
-+                              memcpy(board_name, "HW556_C", 7);
-+                      }
-               }
-       }
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -70,6 +70,11 @@ static int bcm63xx_parse_cfe_partitions(
-                             BCM63XX_CFE_BLOCK_SIZE);
-       cfelen = cfe_erasesize;
-+
-+      /* Fix HW556 MX29LV128DB */
-+      if (!strncmp(bcm63xx_nvram_get_name(), "HW556", 5))
-+              cfelen = 0x20000;
-+
-       nvramlen = bcm63xx_nvram_get_psi_size();
-       nvramlen = roundup(nvramlen, cfe_erasesize);
-       nvramaddr = master->size - nvramlen;
diff --git a/target/linux/brcm63xx/patches-3.8/535-board_rta770w.patch b/target/linux/brcm63xx/patches-3.8/535-board_rta770w.patch
deleted file mode 100644 (file)
index e12628f..0000000
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -801,6 +801,60 @@ static struct board_info __initdata boar
-               },
-       },
- };
-+
-+// Actually this board is the very same as the rta770bw,
-+// where the additional 'b' within the name just
-+// just indicates 'Annex B'. The ADSL Modem itself is able
-+// to handle both Annex A as well as Annex B -
-+// the loaded firmware makes the only difference
-+static struct board_info __initdata board_rta770w = {
-+      .name                           = "RTA770W",
-+      .expected_cpu_id                = 0x6345,
-+
-+      .has_uart0                      = 1,
-+
-+      .has_enet0                      = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-+              .force_speed_100        = 1,
-+              .force_duplex_full      = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "RTA770W:green:usb",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770W:green:adsl",
-+                      .gpio           = 8,
-+              },
-+              {
-+                      .name           = "RTA770W:green:diag",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "RTA770W:green:wlan",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 13,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .active_low     = 1,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
-+};
- #endif
- /*
-@@ -3616,6 +3670,7 @@ static const struct board_info __initcon
- #ifdef CONFIG_BCM63XX_CPU_6345
-       &board_96345gw2,
-       &board_rta770bw,
-+      &board_rta770w,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-       &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.8/550-alice_gate2_leds.patch
deleted file mode 100644 (file)
index ab5cd4d..0000000
+++ /dev/null
@@ -1,102 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2058,6 +2058,99 @@ static struct board_info __initdata boar
-       .has_ohci0 = 1,
-       .has_ehci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "AGPF-S0:red:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:service",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:service",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:adsl",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:adsl",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:wifi",
-+                      .gpio           = 23,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:wifi",
-+                      .gpio           = 22,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:internet",
-+                      .gpio           = 25,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:internet",
-+                      .gpio           = 24,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:usr1",
-+                      .gpio           = 27,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:usr1",
-+                      .gpio           = 26,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:red:usr2",
-+                      .gpio           = 30,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "AGPF-S0:green:usr2",
-+                      .gpio           = 29,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_DWVS0 = {
diff --git a/target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.8/551-96348gw_a_leds.patch
deleted file mode 100644 (file)
index c555e00..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1503,6 +1503,19 @@ static struct board_info __initdata boar
-       },
-       .has_ohci0 = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "96348GW-A::adsl",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "96348GW-A::usb",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              }
-+      },
- };
- static struct board_info __initdata board_96348_D4PW = {
diff --git a/target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.8/552-board_96348gw-10_reset_button.patch
deleted file mode 100644 (file)
index 06418f6..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -963,6 +963,17 @@ static struct board_info __initdata boar
-                       .active_low     = 1,
-               },
-       },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- static struct board_info __initdata board_96348gw_11 = {
diff --git a/target/linux/brcm63xx/patches-3.8/553-boards_probe_switch.patch b/target/linux/brcm63xx/patches-3.8/553-boards_probe_switch.patch
deleted file mode 100644 (file)
index 6879e2b..0000000
+++ /dev/null
@@ -1,119 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -591,6 +591,8 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -634,6 +636,8 @@ static struct board_info __initdata boar
-       .has_uart0                      = 1,
-       .has_enet0                      = 1,
-       .enet0 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -919,6 +923,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -991,6 +997,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1220,6 +1228,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1395,6 +1405,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1469,6 +1481,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1490,6 +1504,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1509,6 +1525,8 @@ static struct board_info __initdata boar
-               .use_internal_phy       = 1,
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1884,6 +1902,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -1936,6 +1956,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -2076,6 +2098,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
-@@ -2193,6 +2217,8 @@ static struct board_info __initdata boar
-       },
-       .enet1 = {
-+              .has_phy                = 1,
-+              .phy_id                 = 0,
-               .force_speed_100        = 1,
-               .force_duplex_full      = 1,
-       },
diff --git a/target/linux/brcm63xx/patches-3.8/554-board_DWVS0_leds_buttons.patch b/target/linux/brcm63xx/patches-3.8/554-board_DWVS0_leds_buttons.patch
deleted file mode 100644 (file)
index b3e3972..0000000
+++ /dev/null
@@ -1,97 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2225,6 +2225,94 @@ static struct board_info __initdata boar
-       .has_ohci0                      = 1,
-       .has_ehci0                      = 1,
-+
-+      .leds = {
-+              {
-+                      .name           = "DWV-S0:red:power",
-+                      .gpio           = 5,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:power",
-+                      .gpio           = 4,
-+                      .active_low     = 1,
-+                      .default_trigger = "default-on",
-+              },
-+              {
-+                      .name           = "DWV-S0:red:internet",
-+                      .gpio           = 6,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:internet",
-+                      .gpio           = 7,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:ADSL",
-+                      .gpio           = 2,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:ADSL",
-+                      .gpio           = 12,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:wifi",
-+                      .gpio           = 10,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:VoIP",
-+                      .gpio           = 9,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:VoIP",
-+                      .gpio           = 0,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:ethernet",
-+                      .gpio           = 1,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:ethernet",
-+                      .gpio           = 8,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:red:USB",
-+                      .gpio           = 11,
-+                      .active_low     = 1,
-+              },
-+              {
-+                      .name           = "DWV-S0:green:USB",
-+                      .gpio           = 3,
-+                      .active_low     = 1,
-+              },
-+      },
-+
-+      .buttons = {
-+              {
-+                      .desc           = "reset",
-+                      .gpio           = 37,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_RESTART,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+              {
-+                      .desc           = "wps",
-+                      .gpio           = 34,
-+                      .active_low     = 1,
-+                      .type           = EV_KEY,
-+                      .code           = KEY_WPS_BUTTON,
-+                      .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+              },
-+      },
- };
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.8/555-netgear_CVG834G_E15R3921.patch b/target/linux/brcm63xx/patches-3.8/555-netgear_CVG834G_E15R3921.patch
deleted file mode 100644 (file)
index 9b43adb..0000000
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -69,6 +69,41 @@
- static struct board_info board;
- /*
-+ * known 3368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+static struct board_info __initdata board_cvg834g = {
-+      .name                           = "CVG834G_E15R3921",
-+      .expected_cpu_id                = 0x3368,
-+
-+      .has_uart0                      = 1,
-+      .has_uart1                      = 1,
-+
-+      .has_enet0                      = 1,
-+      .has_pci                        = 1,
-+
-+      .enet0 = {
-+              .has_phy                = 1,
-+              .use_internal_phy       = 1,
-+      },
-+
-+      .leds = {
-+              {
-+                      .name           = "CVG834G::switch-reset",
-+                      .gpio           = 36,
-+                      .default_trigger= "default-on",
-+              },
-+
-+              {
-+                      .name           = "CVG834G:green:power",
-+                      .gpio           = 37,
-+                      .default_trigger= "default-on",
-+              },
-+      },
-+};
-+#endif
-+
-+/*
-  * known 6328 boards
-  */
- #ifdef CONFIG_BCM63XX_CPU_6328
-@@ -3884,6 +3919,9 @@ static struct board_info __initdata boar
-  * all boards
-  */
- static const struct board_info __initconst *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_3368
-+      &board_cvg834g,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6328
-       &board_96328avng,
-       &board_96328A_1241N,
diff --git a/target/linux/brcm63xx/patches-3.8/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.8/800-wl_exports.patch
deleted file mode 100644 (file)
index cae2118..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -41,6 +41,13 @@ struct bcm963xx_nvram {
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-+/*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
- void __init bcm63xx_nvram_init(void *addr)
- {
-       unsigned int check_len;
-@@ -48,6 +55,7 @@ void __init bcm63xx_nvram_init(void *add
-       /* extract nvram data */
-       memcpy(&nvram, addr, sizeof(nvram));
-+      memcpy(&nvram_buf, addr, NVRAM_SPACE);
-       /* check checksum before using data */
-       if (nvram.version <= 4) {
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
- #endif /* CONFIG_DMA_NONCOHERENT */
diff --git a/target/linux/brcm63xx/patches-3.8/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.8/801-ssb_export_fallback_sprom.patch
deleted file mode 100644 (file)
index 9861925..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/export.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-@@ -4001,7 +4002,7 @@ static const struct board_info __initcon
-  * bcm4318 WLAN work
-  */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+struct ssb_sprom bcm63xx_sprom = {
-       .revision               = 0x02,
-       .board_rev              = 0x17,
-       .country_code           = 0x0,
-@@ -4021,6 +4022,7 @@ static struct ssb_sprom bcm63xx_sprom =
-       .boardflags_lo          = 0x2848,
-       .boardflags_hi          = 0x0000,
- };
-+EXPORT_SYMBOL(bcm63xx_sprom);
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
diff --git a/target/linux/brcm63xx/patches-3.8/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-3.8/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644 (file)
index 9037d89..0000000
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c  |    5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -146,6 +146,10 @@
- #define   RTL8367_EXT_RGMXF_TXDELAY_MASK      1
- #define   RTL8367_EXT_RGMXF_RXDELAY_MASK      0x7
-+#define RTL8367_PHY_AD_REG                    0x130f
-+#define    RTL8370_PHY_AD_DUMMY_1_OFFSET      5
-+#define    RTL8370_PHY_AD_DUMMY_1_MASK                0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x)              (0x1310 + (_x))
- #define   RTL8367_DI_FORCE_MODE                       BIT(12)
- #define   RTL8367_DI_FORCE_NWAY                       BIT(7)
-@@ -894,6 +898,7 @@ static int rtl8367_extif_set_mode(struct
-       case RTL8367_EXTIF_MODE_RGMII_33V:
-               REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
-               REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+              REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
-               break;
-       case RTL8367_EXTIF_MODE_TMII_MAC: