Add support for WRT600N and WRT600N v1.1 (#3535)
authorFlorian Fainelli <florian@openwrt.org>
Mon, 7 Jul 2008 14:17:02 +0000 (14:17 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Mon, 7 Jul 2008 14:17:02 +0000 (14:17 +0000)
SVN-Revision: 11740

package/broadcom-diag/src/diag.c
package/broadcom-diag/src/diag.h

index 9cfc1d9..bbc0bfa 100644 (file)
@@ -61,6 +61,8 @@ enum {
        WRTSL54GS,
        WRT54G3G,
        WRT350N,
+       WRT600N,
+       WRT600NV11,
 
        /* ASUS */
        WLHDD,
@@ -240,6 +242,38 @@ static struct platform_t __initdata platforms[] = {
                },
                .platform_init = bcm57xx_init,
        },
+       [WRT600N] = {
+               .name           = "Linksys WRT600N",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",              .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
+                       { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
+                       { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
+                       { .name = "wl0_ses_green",      .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
+                       { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+                       { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+               },
+               .platform_init = bcm57xx_init,
+       },
+       [WRT600NV11] = {
+               .name           = "Linksys WRT600N V1.1",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",             .gpio = 1 << 2,  .polarity = REVERSE }, // Power LED
+                       { .name = "usb",                .gpio = 1 << 3,  .polarity = REVERSE }, // USB LED
+                       { .name = "wl0_ses_amber",      .gpio = 1 << 8,  .polarity = REVERSE }, // 2.4Ghz LED Amber
+                       { .name = "wl0_ses_green",     .gpio = 1 << 9,  .polarity = REVERSE }, // 2.4Ghz LED Green
+                       { .name = "wl1_ses_amber",      .gpio = 1 << 10, .polarity = REVERSE }, // 5.6Ghz LED Amber
+                       { .name = "wl1_ses_green",      .gpio = 1 << 11, .polarity = REVERSE }, // 5.6Ghz LED Green
+               },
+               .platform_init = bcm57xx_init,
+       },
        /* Asus */
        [WLHDD] = {
                .name           = "ASUS WL-HDD",
@@ -746,6 +780,14 @@ static struct platform_t __init *platform_detect(void)
        boardnum = getvar("boardnum");
        boardtype = getvar("boardtype");
 
+       if (!strcmp(boardnum, "20070615")) { /* Linksys WRT600N  v1/V1.1 */
+               if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0") && !strcmp(getvar("switch_type"),"BCM5395"))
+                       return &platforms[WRT600NV11];
+
+       if (!strcmp(boardtype, "0x478") && !strcmp(getvar("cardbus"), "0"))
+                       return &platforms[WRT600N];
+       }
+
        if (startswith(getvar("pmon_ver"), "CFE")) {
                /* CFE based - newer hardware */
                if (!strcmp(boardnum, "42")) { /* Linksys */
index 5f46d9d..52e84fa 100644 (file)
@@ -24,7 +24,7 @@
 #include <linux/irq.h>
 #define MODULE_NAME "diag"
 
-#define MAX_GPIO 8
+#define MAX_GPIO 16
 #define FLASH_TIME HZ/6
 
 enum polarity_t {