generic: add rtl8366rb switch port rate, port and qos enable/disable support
authorGabor Juhos <juhosg@openwrt.org>
Mon, 27 Sep 2010 14:41:54 +0000 (14:41 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 27 Sep 2010 14:41:54 +0000 (14:41 +0000)
Patch-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 23126

target/linux/generic/files/drivers/net/phy/rtl8366rb.c

index ec196f941be079cbc96b719a12c3d46242797972..7db3e6578060636968fb0b7cfc9e10d170ad2fc7 100644 (file)
@@ -3,6 +3,7 @@
  *
  * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
  * Copyright (C) 2010 Antti Seppälä <a.seppala@gmail.com>
+ * Copyright (C) 2010 Roman Yeryomin <roman@advem.lv>
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License version 2 as published
 #define RTL8366RB_VLAN_MEMBER_MASK     0xff
 #define RTL8366RB_VLAN_FID_MASK                0x7
 
+
+/* Port ingress bandwidth control */
+#define RTL8366RB_IB_BASE              0x0200
+#define RTL8366RB_IB_REG(pnum)         (RTL8366RB_IB_BASE + pnum)
+#define RTL8366RB_IB_BDTH_MASK         0x3fff
+#define RTL8366RB_IB_PREIFG_OFFSET     14
+#define RTL8366RB_IB_PREIFG_MASK       (1 << RTL8366RB_IB_PREIFG_OFFSET)
+
+/* Port egress bandwidth control */
+#define RTL8366RB_EB_BASE              0x02d1
+#define RTL8366RB_EB_REG(pnum)         (RTL8366RB_EB_BASE + pnum)
+#define RTL8366RB_EB_BDTH_MASK         0x3fff
+#define RTL8366RB_EB_PREIFG_REG        0x02f8
+#define RTL8366RB_EB_PREIFG_OFFSET     9
+#define RTL8366RB_EB_PREIFG_MASK       (1 << RTL8366RB_EB_PREIFG_OFFSET)
+
+#define RTL8366RB_BDTH_SW_MAX          1048512
+#define RTL8366RB_BDTH_BASE            64
+#define RTL8366RB_BDTH_REG_DEFAULT     16383
+
+/* QOS */
+#define RTL8366RB_QOS_BIT              15
+#define RTL8366RB_QOS_MASK             (1 << RTL8366RB_QOS_BIT)
+/* Include/Exclude Preamble and IFG (20 bytes). 0:Exclude, 1:Include. */
+#define RTL8366RB_QOS_DEFAULT_PREIFG   1
+
+
 static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
        { 0,  0, 4, "IfInOctets"                                },
        { 0,  4, 4, "EtherStatsOctets"                          },
@@ -748,6 +776,159 @@ static int rtl8366rb_sw_get_port_led(struct switch_dev *dev,
        return 0;
 }
 
+static int rtl8366rb_sw_set_port_disable(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       u32 mask, data;
+
+       if (val->port_vlan >= RTL8366RB_NUM_PORTS)
+               return -EINVAL;
+
+       mask = 1 << val->port_vlan ;
+       if (val->value.i)
+               data = mask;
+       else
+               data = 0;
+
+       return rtl8366_smi_rmwr(smi, RTL8366RB_PECR, mask, data);
+}
+
+static int rtl8366rb_sw_get_port_disable(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       u32 data;
+
+       if (val->port_vlan >= RTL8366RB_NUM_PORTS)
+               return -EINVAL;
+
+       rtl8366_smi_read_reg(smi, RTL8366RB_PECR, &data);
+       if (data & (1 << val->port_vlan))
+               val->value.i = 1;
+       else
+               val->value.i = 0;
+
+       return 0;
+}
+
+static int rtl8366rb_sw_set_port_rate_in(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+       if (val->port_vlan >= RTL8366RB_NUM_PORTS)
+               return -EINVAL;
+
+       if (val->value.i > 0 && val->value.i < RTL8366RB_BDTH_SW_MAX)
+               val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_BASE;
+       else
+               val->value.i = RTL8366RB_BDTH_REG_DEFAULT;
+
+       return rtl8366_smi_rmwr(smi, RTL8366RB_IB_REG(val->port_vlan),
+               RTL8366RB_IB_BDTH_MASK | RTL8366RB_IB_PREIFG_MASK,
+               val->value.i |
+               (RTL8366RB_QOS_DEFAULT_PREIFG << RTL8366RB_IB_PREIFG_OFFSET));
+
+}
+
+static int rtl8366rb_sw_get_port_rate_in(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       u32 data;
+
+       if (val->port_vlan >= RTL8366RB_NUM_PORTS)
+               return -EINVAL;
+
+       rtl8366_smi_read_reg(smi, RTL8366RB_IB_REG(val->port_vlan), &data);
+       data &= RTL8366RB_IB_BDTH_MASK;
+       if (data < RTL8366RB_IB_BDTH_MASK)
+               data += 1;
+
+       val->value.i = (int)data * RTL8366RB_BDTH_BASE;
+
+       return 0;
+}
+
+static int rtl8366rb_sw_set_port_rate_out(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+
+       if (val->port_vlan >= RTL8366RB_NUM_PORTS)
+               return -EINVAL;
+
+       rtl8366_smi_rmwr(smi, RTL8366RB_EB_PREIFG_REG,
+               RTL8366RB_EB_PREIFG_MASK,
+               (RTL8366RB_QOS_DEFAULT_PREIFG << RTL8366RB_EB_PREIFG_OFFSET));
+
+       if (val->value.i > 0 && val->value.i < RTL8366RB_BDTH_SW_MAX)
+               val->value.i = (val->value.i - 1) / RTL8366RB_BDTH_BASE;
+       else
+               val->value.i = RTL8366RB_BDTH_REG_DEFAULT;
+
+       return rtl8366_smi_rmwr(smi, RTL8366RB_EB_REG(val->port_vlan),
+                       RTL8366RB_EB_BDTH_MASK, val->value.i );
+
+}
+
+static int rtl8366rb_sw_get_port_rate_out(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       u32 data;
+
+       if (val->port_vlan >= RTL8366RB_NUM_PORTS)
+               return -EINVAL;
+
+       rtl8366_smi_read_reg(smi, RTL8366RB_EB_REG(val->port_vlan), &data);
+       data &= RTL8366RB_EB_BDTH_MASK;
+       if (data < RTL8366RB_EB_BDTH_MASK)
+               data += 1;
+
+       val->value.i = (int)data * RTL8366RB_BDTH_BASE;
+
+       return 0;
+}
+
+static int rtl8366rb_sw_set_qos_enable(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       u32 data;
+
+       if (val->value.i)
+               data = RTL8366RB_QOS_MASK;
+       else
+               data = 0;
+
+       return rtl8366_smi_rmwr(smi, RTL8366RB_SGCR, RTL8366RB_QOS_MASK, data);
+}
+
+static int rtl8366rb_sw_get_qos_enable(struct switch_dev *dev,
+                                   const struct switch_attr *attr,
+                                   struct switch_val *val)
+{
+       struct rtl8366_smi *smi = sw_to_rtl8366_smi(dev);
+       u32 data;
+
+       rtl8366_smi_read_reg(smi, RTL8366RB_SGCR, &data);
+       if (data & RTL8366RB_QOS_MASK)
+               val->value.i = 1;
+       else
+               val->value.i = 0;
+
+       return 0;
+}
+
 static int rtl8366rb_sw_reset_port_mibs(struct switch_dev *dev,
                                       const struct switch_attr *attr,
                                       struct switch_val *val)
@@ -814,6 +995,13 @@ static struct switch_attr rtl8366rb_globals[] = {
                .set = rtl8366rb_sw_set_blinkrate,
                .get = rtl8366rb_sw_get_blinkrate,
                .max = 5
+       }, {
+               .type = SWITCH_TYPE_INT,
+               .name = "enable_qos",
+               .description = "Enable QOS",
+               .set = rtl8366rb_sw_set_qos_enable,
+               .get = rtl8366rb_sw_get_qos_enable,
+               .max = 1
        },
 };
 
@@ -844,6 +1032,27 @@ static struct switch_attr rtl8366rb_port[] = {
                .max = 15,
                .set = rtl8366rb_sw_set_port_led,
                .get = rtl8366rb_sw_get_port_led,
+       }, {
+               .type = SWITCH_TYPE_INT,
+               .name = "disable",
+               .description = "Get/Set port state (enabled or disabled)",
+               .max = 1,
+               .set = rtl8366rb_sw_set_port_disable,
+               .get = rtl8366rb_sw_get_port_disable,
+       }, {
+               .type = SWITCH_TYPE_INT,
+               .name = "rate_in",
+               .description = "Get/Set port ingress (incoming) bandwidth limit in kbps",
+               .max = RTL8366RB_BDTH_SW_MAX,
+               .set = rtl8366rb_sw_set_port_rate_in,
+               .get = rtl8366rb_sw_get_port_rate_in,
+       }, {
+               .type = SWITCH_TYPE_INT,
+               .name = "rate_out",
+               .description = "Get/Set port egress (outgoing) bandwidth limit in kbps",
+               .max = RTL8366RB_BDTH_SW_MAX,
+               .set = rtl8366rb_sw_set_port_rate_out,
+               .get = rtl8366rb_sw_get_port_rate_out,
        },
 };
 
@@ -1132,5 +1341,6 @@ MODULE_DESCRIPTION(RTL8366RB_DRIVER_DESC);
 MODULE_VERSION(RTL8366RB_DRIVER_VER);
 MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 MODULE_AUTHOR("Antti Seppälä <a.seppala@gmail.com>");
+MODULE_AUTHOR("Roman Yeryomin <roman@advem.lv>");
 MODULE_LICENSE("GPL v2");
 MODULE_ALIAS("platform:" RTL8366RB_DRIVER_NAME);