[packages] miniupnpd: properly handle multiple internal interfaces in hotplug helper...
authorJo-Philipp Wich <jow@openwrt.org>
Thu, 9 Jun 2011 17:04:06 +0000 (17:04 +0000)
committerJo-Philipp Wich <jow@openwrt.org>
Thu, 9 Jun 2011 17:04:06 +0000 (17:04 +0000)
SVN-Revision: 27151

net/miniupnpd/Makefile
net/miniupnpd/files/miniupnpd.iface.hotplug
net/miniupnpd/files/miniupnpd.init

index 318c764..0a2d443 100644 (file)
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2006-2009 OpenWrt.org
+# Copyright (C) 2006-2011 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,7 +10,7 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=miniupnpd
 PKG_VERSION:=1.5.20110309
-PKG_RELEASE:=1
+PKG_RELEASE:=2
 PKG_MD5SUM:=350d20bf25922e12f8d69e06fa33fd83
 
 PKG_SOURCE_URL:=http://miniupnp.free.fr/files
index 4772df9..32d5272 100644 (file)
@@ -1,7 +1,8 @@
 #!/bin/sh
 
-/etc/init.d/miniupnpd enabled && [ -n "`pidof miniupnpd`" ] && {
-       local intif="$(uci_get upnpd config internal_iface)"
-       [ "$ACTION" = "ifup" ] && [ "$INTERFACE" = "$intif" ] && \
-               /etc/init.d/miniupnpd restart
+/etc/init.d/miniupnpd enabled && [ -n "`pidof miniupnpd`" ] && [ "$ACTION" = "ifup" ] && {
+       local intif
+       for intif in $(uci_get upnpd config internal_iface); do
+               [ "$INTERFACE" = "$intif" ] && /etc/init.d/miniupnpd restart
+       done
 }
index 3d41ba8..4eebe41 100644 (file)
@@ -2,52 +2,55 @@
 START=95
 
 upnpd_get_port_range() {
-    local _var="$1"; shift
-    local _val
-   
-    config_get _val "$@"
-
-    case "$_val" in
-       [0-9]*[:-][0-9]*)
-           export -n -- "${_var}_start=${_val%%[:-]*}"
-           export -n -- "${_var}_end=${_val##*[:-]}"
-       ;;
-       [0-9]*)
-           export -n -- "${_var}_start=$_val"
-           export -n -- "${_var}_end="
-       ;;
-    esac
+       local _var="$1"; shift
+       local _val
+
+       config_get _val "$@"
+
+       case "$_val" in
+               [0-9]*[:-][0-9]*)
+                       export -n -- "${_var}_start=${_val%%[:-]*}"
+                       export -n -- "${_var}_end=${_val##*[:-]}"
+               ;;
+               [0-9]*)
+                       export -n -- "${_var}_start=$_val"
+                       export -n -- "${_var}_end="
+               ;;
+       esac
 }
 
 conf_rule_add() {
-    local cfg="$1"
-    local tmpconf="$2"
-    local action external_port_start external_port_end int_addr
-    local internal_port_start internal_port_end
-    config_get action "$cfg" action "deny"               # allow or deny
-    upnpd_get_port_range "ext" "$cfg" ext_ports "0-65535" # external ports: x, x-y, x:y
-    config_get int_addr "$cfg" int_addr "0.0.0.0/0"       # ip or network and subnet mask (internal)
-    upnpd_get_port_range "int" "$cfg" int_ports "0-65535" # internal ports: x, x-y, x:y or range
-    # Make a single IP IP/32 so that miniupnpd.conf can use it.
-    case "$int_addr" in
-       */*) ;;
-       *) int_addr="$int_addr/32"  ;;
-    esac
-    echo "${action} ${ext_start}${ext_end:+-}${ext_end} ${int_addr} ${int_start}${int_end:+-}${int_end}" >>$tmpconf   
+       local cfg="$1"
+       local tmpconf="$2"
+       local action external_port_start external_port_end int_addr
+       local internal_port_start internal_port_end
+
+       config_get action "$cfg" action "deny"               # allow or deny
+       upnpd_get_port_range "ext" "$cfg" ext_ports "0-65535" # external ports: x, x-y, x:y
+       config_get int_addr "$cfg" int_addr "0.0.0.0/0"       # ip or network and subnet mask (internal)
+       upnpd_get_port_range "int" "$cfg" int_ports "0-65535" # internal ports: x, x-y, x:y or range
+
+       # Make a single IP IP/32 so that miniupnpd.conf can use it.
+       case "$int_addr" in
+               */*) ;;
+               *) int_addr="$int_addr/32" ;;
+       esac
+
+       echo "${action} ${ext_start}${ext_end:+-}${ext_end} ${int_addr} ${int_start}${int_end:+-}${int_end}" >>$tmpconf
 }
 
 upnpd_write_bool() {
-    local opt="$1"
-    local def="${2:-0}"
-    local alt="$3"
-
-    local val
-    config_get_bool val config "$opt" "$def"
-    if [ "$val" -eq 0 ]; then
-       echo "${alt:-$opt}=no" >> $tmpconf
-    else
-       echo "${alt:-$opt}=yes" >> $tmpconf
-    fi
+       local opt="$1"
+       local def="${2:-0}"
+       local alt="$3"
+       local val
+
+       config_get_bool val config "$opt" "$def"
+       if [ "$val" -eq 0 ]; then
+               echo "${alt:-$opt}=no" >> $tmpconf
+       else
+               echo "${alt:-$opt}=yes" >> $tmpconf
+       fi
 }
 
 start() {
@@ -84,89 +87,89 @@ start() {
 
        local ifname
        config_get ifname ${extiface:-wan} ifname
-       
+
        if [ -n "$conffile" ]; then
-           args="-f $conffile"
+               args="-f $conffile"
        else
-           local tmpconf="/var/etc/miniupnpd.conf"
-           args="-f $tmpconf"
-           mkdir -p /var/etc
-
-           echo "ext_ifname=$ifname" >$tmpconf
-
-           local iface
-           
-           [ -n "$extip" ] && \
-               echo "ext_ip=$extip" >>$tmpconf
-               
-           for iface in ${intiface:-lan}; do
-               local ipaddr
-               config_get ipaddr "$iface" ipaddr
-               [ -n "$ipaddr" ] && \
-                   echo "listening_ip=$ipaddr" >>$tmpconf
-           done
-           
-           [ "$port" != "auto" ] && \
-               echo "port=$port" >>$tmpconf
-
-           config_load "upnpd"
-           upnpd_write_bool enable_natpmp 1
-           upnpd_write_bool enable_upnp 1
-           upnpd_write_bool secure_mode 1
-           upnpd_write_bool system_uptime 1
-
-           [ -n "$upnp_lease_file" ] && \
-               echo "lease_file=$upnp_lease_file" >>$tmpconf
-               
-           [ -n "$upload" -a -n "$download" ] && {
-               echo "bitrate_down=$(($download * 1024 * 8))" >>$tmpconf
-               echo "bitrate_up=$(($upload * 1024 * 8))" >>$tmpconf
-           }
-
-           [ -n "${presentation_url}" ] && \
-               echo "presentation_url=${presentation_url}" >>$tmpconf
-
-           [ -n "${notify_interval}" ] && \
-               echo "notify_interval=${notify_interval}" >>$tmpconf
-
-           [ -n "${clean_ruleset_threshold}" ] && \
-               echo "clean_ruleset_threshold=${clean_ruleset_threshold}" >>$tmpconf
-
-           [ -n "${clean_ruleset_interval}" ] && \
-               echo "clean_ruleset_interval=${clean_ruleset_interval}" >>$tmpconf
-
-           [ -z "$uuid" ] && {
-               uuid="$(cat /proc/sys/kernel/random/uuid)"
-               uci set upnpd.config.uuid=$uuid
-               uci commit upnpd
-           }
-
-           [ "$uuid" = "nocli" ] || \
-               echo "uuid=$uuid" >>$tmpconf
-               
-           [ -n "${serial_number}" ] && \
-               echo "serial=${serial_number}" >>$tmpconf
-               
-           [ -n "${model_number}" ] && \
-               echo "model_number=${model_number}" >>$tmpconf
-           
+               local tmpconf="/var/etc/miniupnpd.conf"
+               args="-f $tmpconf"
+               mkdir -p /var/etc
+
+               echo "ext_ifname=$ifname" >$tmpconf
+
+               [ -n "$extip" ] && \
+                       echo "ext_ip=$extip" >>$tmpconf
+
+               local iface
+               for iface in ${intiface:-lan}; do
+                       local ipaddr
+                       config_get ipaddr "$iface" ipaddr
+                       [ -n "$ipaddr" ] && \
+                               echo "listening_ip=$ipaddr" >>$tmpconf
+               done
+
+               [ "$port" != "auto" ] && \
+                       echo "port=$port" >>$tmpconf
+
+               config_load "upnpd"
+               upnpd_write_bool enable_natpmp 1
+               upnpd_write_bool enable_upnp 1
+               upnpd_write_bool secure_mode 1
+               upnpd_write_bool system_uptime 1
+
+               [ -n "$upnp_lease_file" ] && \
+                       echo "lease_file=$upnp_lease_file" >>$tmpconf
+
+               [ -n "$upload" -a -n "$download" ] && {
+                       echo "bitrate_down=$(($download * 1024 * 8))" >>$tmpconf
+                       echo "bitrate_up=$(($upload * 1024 * 8))" >>$tmpconf
+               }
+
+               [ -n "${presentation_url}" ] && \
+                       echo "presentation_url=${presentation_url}" >>$tmpconf
+
+               [ -n "${notify_interval}" ] && \
+                       echo "notify_interval=${notify_interval}" >>$tmpconf
+
+               [ -n "${clean_ruleset_threshold}" ] && \
+                       echo "clean_ruleset_threshold=${clean_ruleset_threshold}" >>$tmpconf
+
+               [ -n "${clean_ruleset_interval}" ] && \
+                       echo "clean_ruleset_interval=${clean_ruleset_interval}" >>$tmpconf
+
+               [ -z "$uuid" ] && {
+                       uuid="$(cat /proc/sys/kernel/random/uuid)"
+                       uci set upnpd.config.uuid=$uuid
+                       uci commit upnpd
+               }
+
+               [ "$uuid" = "nocli" ] || \
+                       echo "uuid=$uuid" >>$tmpconf
+
+               [ -n "${serial_number}" ] && \
+                       echo "serial=${serial_number}" >>$tmpconf
+
+               [ -n "${model_number}" ] && \
+                       echo "model_number=${model_number}" >>$tmpconf
+
            config_foreach conf_rule_add perm_rule "$tmpconf"
-       fi    
-       
-                       
+       fi
+
+
        if [ -n "$ifname" ]; then
-           # start firewall
-           local zone
-           config_load firewall
-           config_get zone core "${extiface:-wan}_zone"
+               # start firewall
+               local zone
+               config_load firewall
+               config_get zone core "${extiface:-wan}_zone"
+
            [ -n "$zone" ] && \
-               miniupnpd_add_rules "$zone" "${extiface:-wan}" "$ifname"
+                       miniupnpd_add_rules "$zone" "${extiface:-wan}" "$ifname"
 
-           if [ "$logging" = "1" ]; then
-               start-stop-daemon -b -S -x miniupnpd -- $args -d 
-           else
-               start-stop-daemon -S -x miniupnpd -- $args 
-           fi
+               if [ "$logging" = "1" ]; then
+                       start-stop-daemon -b -S -x miniupnpd -- $args -d
+               else
+                       start-stop-daemon -S -x miniupnpd -- $args
+               fi
        else
                logger -t "upnp daemon" "external interface not found, not starting"
        fi