new, cleaner Pronghorn Metro patch
authorImre Kaloz <kaloz@openwrt.org>
Sun, 10 Jun 2007 12:17:41 +0000 (12:17 +0000)
committerImre Kaloz <kaloz@openwrt.org>
Sun, 10 Jun 2007 12:17:41 +0000 (12:17 +0000)
SVN-Revision: 7543

target/linux/ixp4xx-2.6/patches/400-pronghorn_metro.patch
target/linux/ixp4xx-2.6/patches/410-pronghorn_metro_setup_mac.patch
target/linux/ixp4xx-2.6/patches/420-pronghorn_metro_mtd_microcode.patch

index eddd80d..b23a04d 100644 (file)
@@ -1,7 +1,20 @@
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig        2007-04-02 16:10:51.000000000 +0200
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Kconfig   2007-04-02 16:11:12.000000000 +0200
-@@ -49,6 +49,14 @@
+diff -Nur linux-2.6.21.1/Documentation/arm/IXP4xx linux-2.6.21.1-owrt/Documentation/arm/IXP4xx
+--- linux-2.6.21.1/Documentation/arm/IXP4xx    2007-06-10 13:54:49.000000000 +0200
++++ linux-2.6.21.1-owrt/Documentation/arm/IXP4xx       2007-06-10 13:46:37.000000000 +0200
+@@ -111,6 +111,9 @@
+    the platform has two mini-PCI slots used for 802.11[bga] cards.
+    Finally, there is an IDE port hanging off the expansion bus.
++ADI Engineering Pronghorn Metro Platform
++http://www.adiengineering.com/php-bin/ecomm4/productDisplay.php?category_id=30&product_id=85
++
+ Gateworks Avila Network Platform
+ http://www.gateworks.com/avila_sbc.htm
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/Kconfig        2007-06-10 13:54:47.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Kconfig   2007-06-10 13:46:37.000000000 +0200
+@@ -57,6 +57,14 @@
          WG302 v2 or WAG302 v2 Access Points. For more information
          on this platform, see http://openwrt.org
  
@@ -16,10 +29,10 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.19.2-owrt/arch/a
  config ARCH_IXDP425
        bool "IXDP425"
        help
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile       2007-04-02 16:10:51.000000000 +0200
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/Makefile  2007-04-02 16:15:51.000000000 +0200
-@@ -13,6 +13,7 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/Makefile       2007-06-10 13:54:47.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/Makefile  2007-06-10 13:46:37.000000000 +0200
+@@ -14,6 +14,7 @@
  obj-pci-$(CONFIG_MACH_NAS100D)                += nas100d-pci.o
  obj-pci-$(CONFIG_MACH_GATEWAY7001)    += gateway7001-pci.o
  obj-pci-$(CONFIG_MACH_WG302V2)                += wg302v2-pci.o
@@ -27,30 +40,34 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.19.2-owrt/arch/
  
  obj-y += common.o
  
-@@ -24,5 +25,6 @@
+@@ -26,5 +27,6 @@
  obj-$(CONFIG_MACH_NAS100D)    += nas100d-setup.o nas100d-power.o
  obj-$(CONFIG_MACH_GATEWAY7001)        += gateway7001-setup.o
  obj-$(CONFIG_MACH_WG302V2)    += wg302v2-setup.o
 +obj-$(CONFIG_MACH_PRONGHORNMETRO)     += pronghornmetro-setup.o
  
  obj-$(CONFIG_PCI)             += $(obj-pci-$(CONFIG_PCI)) common-pci.o
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-pci.c   1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c      2007-04-02 16:17:35.000000000 +0200
-@@ -0,0 +1,70 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-pci.c   1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-pci.c      2007-06-10 13:50:08.000000000 +0200
+@@ -0,0 +1,74 @@
 +/*
 + * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
 + *
-+ * PCI setup routines for ADI Engineering Pronghorn Metro platform
++ * PCI setup routines for ADI Engineering Pronghorn Metro
 + *
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
++ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
++ *
++ * based on coyote-pci.c:
++ *    Copyright (C) 2002 Jungo Software Technologies.
++ *    Copyright (C) 2003 MontaVista Softwrae, Inc.
++ *
++ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 + *
 + * This program is free software; you can redistribute it and/or modify
 + * it under the terms of the GNU General Public License version 2 as
 + * published by the Free Software Foundation.
 + *
-+ * Author: Copied from coyote-pci.c
 + */
 +
 +#include <linux/kernel.h>
@@ -70,24 +87,24 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.19.
 +
 +void __init pronghornmetro_pci_preinit(void)
 +{
-+      set_irq_type(IRQ_PCI_SLOT0, IRQT_LOW);
-+      set_irq_type(IRQ_PCI_SLOT1, IRQT_LOW);
-+      set_irq_type(IRQ_PCI_SLOT2, IRQT_LOW);
-+      set_irq_type(IRQ_PCI_SLOT3, IRQT_LOW);
++      set_irq_type(IRQ_IXP4XX_GPIO4, IRQT_LOW);
++      set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
++      set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW);
++      set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
 +
 +      ixp4xx_pci_preinit();
 +}
 +
 +static int __init pronghornmetro_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 +{
-+      if (slot == PCI_SLOT0_DEVID)
-+              return IRQ_PCI_SLOT0;
-+      else if (slot == PCI_SLOT1_DEVID)
-+              return IRQ_PCI_SLOT1;
-+      else if (slot == PCI_SLOT2_DEVID)
-+              return IRQ_PCI_SLOT2;
-+      else if (slot == PCI_SLOT3_DEVID)
-+              return IRQ_PCI_SLOT3;
++      if (slot == 13)
++              return IRQ_IXP4XX_GPIO4;
++      else if (slot == 14)
++              return IRQ_IXP4XX_GPIO6;
++      else if (slot == 15)
++              return IRQ_IXP4XX_GPIO11;
++      else if (slot == 16)
++              return IRQ_IXP4XX_GPIO1;
 +      else return -1;
 +}
 +
@@ -108,18 +125,21 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-pci.c linux-2.6.19.
 +}
 +
 +subsys_initcall(pronghornmetro_pci_init);
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c    2007-04-02 16:18:13.000000000 +0200
-@@ -0,0 +1,119 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c    2007-06-10 13:51:51.000000000 +0200
+@@ -0,0 +1,108 @@
 +/*
 + * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
 + *
-+ * Board setup for ADI Engineering Pronghorn Metro
++ * Board setup for the ADI Engineering Pronghorn Metro
++ *
++ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
 + *
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ * based on coyote-setup.c:
++ *      Copyright (C) 2003-2005 MontaVista Software, Inc.
 + *
-+ * Author: Copied from coyote-setup.c
++ * Author: Imre Kaloz <Kaloz@openwrt.org>
 + */
 +
 +#include <linux/kernel.h>
@@ -164,20 +184,6 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
 +      .flags  = IORESOURCE_MEM,
 +};
 +
-+static struct ixp4xx_i2c_pins pronghornmetro_i2c_gpio_pins = {
-+      .sda_pin        = PRONGHORNMETRO_SDA_PIN,
-+      .scl_pin        = PRONGHORNMETRO_SCL_PIN,
-+};
-+
-+static struct platform_device pronghornmetro_i2c_controller = {
-+      .name           = "IXP4XX-I2C",
-+      .id             = 0,
-+      .dev            = {
-+              .platform_data = &pronghornmetro_i2c_gpio_pins,
-+      },
-+      .num_resources  = 0
-+};
-+
 +static struct plat_serial8250_port pronghornmetro_uart_data[] = {
 +      {
 +              .mapbase        = IXP4XX_UART2_BASE_PHYS,
@@ -202,9 +208,8 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
 +};
 +
 +static struct platform_device *pronghornmetro_devices[] __initdata = {
-+      &pronghornmetro_i2c_controller,
 +      &pronghornmetro_flash,
-+      &pronghornmetro_uart
++      &pronghornmetro_uart,
 +};
 +
 +static void __init pronghornmetro_init(void)
@@ -222,6 +227,7 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
 +
 +#ifdef CONFIG_MACH_PRONGHORNMETRO
 +MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
++      /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 +      .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
 +      .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 +      .map_io         = ixp4xx_map_io,
@@ -231,115 +237,15 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
 +      .init_machine   = pronghornmetro_init,
 +MACHINE_END
 +#endif
-diff -Nur linux-2.6.19.2/Documentation/arm/IXP4xx linux-2.6.19.2-owrt/Documentation/arm/IXP4xx
---- linux-2.6.19.2/Documentation/arm/IXP4xx    2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/Documentation/arm/IXP4xx       2007-04-02 16:11:12.000000000 +0200
-@@ -111,6 +111,9 @@
-    the platform has two mini-PCI slots used for 802.11[bga] cards.
-    Finally, there is an IDE port hanging off the expansion bus.
-+ADI Engineering Pronghorn Metro Platform
-+http://www.adiengineering.com/productsPronghornMetro.html
-+
- Gateworks Avila Network Platform
- http://www.gateworks.com/avila_sbc.htm
-diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/hardware.h
---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/hardware.h      2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/hardware.h 2007-04-02 16:11:12.000000000 +0200
-@@ -43,6 +43,7 @@
- /* Platform specific details */
- #include "ixdp425.h"
- #include "coyote.h"
-+#include "pronghornmetro.h"
- #include "prpmc1100.h"
- #include "nslu2.h"
- #include "nas100d.h"
-diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/irqs.h
---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/irqs.h  2007-01-10 20:10:37.000000000 +0100
-+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/irqs.h     2007-04-02 16:11:12.000000000 +0200
-@@ -94,6 +94,21 @@
- #define       IRQ_COYOTE_IDE          IRQ_IXP4XX_GPIO5
- /*
-+ * ADI Pronghorn Metro Board IRQs
-+ */
-+#if defined(CONFIG_MACH_PRONGHORNMETRO)
-+#define IRQ_PCI_SLOT0  IRQ_IXP4XX_GPIO4
-+#define IRQ_PCI_SLOT1  IRQ_IXP4XX_GPIO6
-+#define IRQ_PCI_SLOT2  IRQ_IXP4XX_GPIO11
-+#define IRQ_PCI_SLOT3  IRQ_IXP4XX_GPIO1
-+#define       IRQ_IDE                  IRQ_IXP4XX_GPIO0
-+#elif defined (CONFIG_MACH_PRONGHORN)
-+#define IRQ_PCI_SLOT0  IRQ_IXP4XX_GPIO11
-+#define IRQ_PCI_SLOT1  IRQ_IXP4XX_GPIO6
-+#define       IRQ_IDE                  IRQ_IXP4XX_GPIO0
-+#endif
-+
-+/*
-  * NSLU2 board IRQs
-  */
- #define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/pronghornmetro.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/pronghornmetro.h
---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/pronghornmetro.h        1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/pronghornmetro.h   2007-04-02 16:11:12.000000000 +0200
-@@ -0,0 +1,47 @@
-+/*
-+ * include/asm-arm/arch-ixp4xx/pronghornmetro.h
-+ *
-+ * ADI Engineering platform specific definitions
-+ *
-+ * Copyright 2004 (c) MontaVista, Software, Inc. 
-+ * 
-+ * This file is licensed under  the terms of the GNU General Public 
-+ * License version 2. This program is licensed "as is" without any 
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+#ifndef __ASM_ARCH_HARDWARE_H__
-+#error "Do not include this directly, instead #include <asm/hardware.h>"
-+#endif
-+
-+#if   defined(CONFIG_MACH_PRONGHORNMETRO)
-+#define       PRONGHORNMETRO_SDA_PIN          9
-+#define       PRONGHORNMETRO_SCL_PIN          10
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define       PCI_SLOT0_PIN    1
-+#define       PCI_SLOT1_PIN    11
-+#define       PCI_SLOT2_PIN    6
-+#define       PCI_SLOT3_PIN    4
-+
-+#define       PCI_SLOT0_DEVID  13
-+#define       PCI_SLOT1_DEVID  14
-+#define       PCI_SLOT2_DEVID  15
-+#define       PCI_SLOT3_DEVID  16
-+
-+#define       TASKFILE_CS      3
-+#define       TASKFILE_CS_REG IXP4XX_EXP_CS3
-+#define       ALTSTAT_CS       4
-+
-+#elif defined(CONFIG_MACH_PRONGHORN)
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define       PCI_SLOT0_PIN     11
-+#define       PCI_SLOT1_PIN     6
-+
-+#define       PCI_SLOT0_DEVID   15
-+#define       PCI_SLOT1_DEVID   14
-+
-+#define       TASKFILE_CS       2
-+#define       TASKFILE_CS_REG   IXP4XX_EXP_CS2
-+#define       ALTSTAT_CS                3
-+#endif
-diff -Nur linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.19.2/include/asm-arm/arch-ixp4xx/uncompress.h    2007-04-02 16:10:51.000000000 +0200
-+++ linux-2.6.19.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h       2007-04-02 16:12:24.000000000 +0200
+diff -Nur linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
+--- linux-2.6.21.1/include/asm-arm/arch-ixp4xx/uncompress.h    2007-06-10 13:54:52.000000000 +0200
++++ linux-2.6.21.1-owrt/include/asm-arm/arch-ixp4xx/uncompress.h       2007-06-10 13:49:37.000000000 +0200
 @@ -40,7 +40,7 @@
        /*
         * Some boards are using UART2 as console
         */
 -      if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2())
-+      if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn() || machine_is_pronghorn_metro())
++      if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001() || machine_is_wg302v2() || machine_is_pronghorn_metro())
                uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
        else
                uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
index 17b6b36..54621d6 100644 (file)
@@ -1,7 +1,7 @@
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-04-02 21:30:12.000000000 +0200
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c    2007-04-02 21:57:11.000000000 +0200
-@@ -87,10 +87,58 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:05:47.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c    2007-06-10 14:05:38.000000000 +0200
+@@ -76,9 +76,57 @@
        .resource       = &pronghornmetro_uart_resource,
  };
  
@@ -52,10 +52,8 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
 +};
 +
  static struct platform_device *pronghornmetro_devices[] __initdata = {
-       &pronghornmetro_i2c_controller,
        &pronghornmetro_flash,
--      &pronghornmetro_uart
-+      &pronghornmetro_uart,
+       &pronghornmetro_uart,
 +      &mac0,
 +      &mac1,
  };
index f3fed26..0c304c7 100644 (file)
@@ -1,7 +1,7 @@
-diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
---- linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-04-04 11:48:14.000000000 +0200
-+++ linux-2.6.19.2-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c    2007-04-04 11:52:09.000000000 +0200
-@@ -14,6 +14,7 @@
+diff -Nur linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+--- linux-2.6.21.1/arch/arm/mach-ixp4xx/pronghornmetro-setup.c 2007-06-10 14:10:24.000000000 +0200
++++ linux-2.6.21.1-owrt/arch/arm/mach-ixp4xx/pronghornmetro-setup.c    2007-06-10 14:10:15.000000000 +0200
+@@ -17,6 +17,7 @@
  #include <linux/serial.h>
  #include <linux/tty.h>
  #include <linux/serial_8250.h>
@@ -9,7 +9,7 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
  #include <linux/slab.h>
  
  #include <asm/types.h>
-@@ -133,12 +134,35 @@
+@@ -122,11 +123,34 @@
        .resource       = &res_mac1,
  };
  
@@ -24,7 +24,6 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
 +};
 +
  static struct platform_device *pronghornmetro_devices[] __initdata = {
-       &pronghornmetro_i2c_controller,
        &pronghornmetro_flash,
        &pronghornmetro_uart,
        &mac0,
@@ -45,7 +44,7 @@ diff -Nur linux-2.6.19.2/arch/arm/mach-ixp4xx/pronghornmetro-setup.c linux-2.6.1
  };
  
  static void __init pronghornmetro_init(void)
-@@ -152,6 +176,8 @@
+@@ -140,6 +164,8 @@
        *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
  
        platform_add_devices(pronghornmetro_devices, ARRAY_SIZE(pronghornmetro_devices));