From: Imre Kaloz Date: Tue, 2 Nov 2010 12:21:31 +0000 (+0000) Subject: [ixp4xx]: refresh 2.6.36 patches X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;h=02803526d136f97655c750f30234cfd843990646 [ixp4xx]: refresh 2.6.36 patches SVN-Revision: 23776 --- diff --git a/target/linux/ixp4xx/patches-2.6.36/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-2.6.36/020-gateworks_i2c_pld.patch index bfb79a3846..965afe9e56 100644 --- a/target/linux/ixp4xx/patches-2.6.36/020-gateworks_i2c_pld.patch +++ b/target/linux/ixp4xx/patches-2.6.36/020-gateworks_i2c_pld.patch @@ -374,7 +374,7 @@ +MODULE_AUTHOR("Chris Lang"); --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -298,6 +298,14 @@ config GPIO_RDC321X +@@ -316,6 +316,14 @@ config GPIO_RDC321X Support for the RDC R321x SoC GPIOs over southbridge PCI configuration space. diff --git a/target/linux/ixp4xx/patches-2.6.36/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.36/105-wg302v1_support.patch index b199489804..6e12caa440 100644 --- a/target/linux/ixp4xx/patches-2.6.36/105-wg302v1_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/105-wg302v1_support.patch @@ -34,8 +34,8 @@ +obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o - -@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup. + obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o +@@ -29,6 +30,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup. obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.36/115-sidewinder_support.patch index bad0826c81..2ec3d95117 100644 --- a/target/linux/ixp4xx/patches-2.6.36/115-sidewinder_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/115-sidewinder_support.patch @@ -30,7 +30,7 @@ Signed-off-by: Imre Kaloz config ARCH_IXDP425 bool "IXDP425" help -@@ -169,7 +177,7 @@ config MACH_FSG +@@ -177,7 +185,7 @@ config MACH_ARCOM_VULCAN # config CPU_IXP46X bool @@ -41,17 +41,17 @@ Signed-off-by: Imre Kaloz config CPU_IXP43X --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302 - obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o +@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302 obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o + obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o +obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o obj-y += common.o -@@ -35,6 +36,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se - obj-$(CONFIG_MACH_FSG) += fsg-setup.o +@@ -37,6 +38,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o + obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o +obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-2.6.36/116-sidewinder_fis_location.patch index 1d0a983980..96be37f1fe 100644 --- a/target/linux/ixp4xx/patches-2.6.36/116-sidewinder_fis_location.patch +++ b/target/linux/ixp4xx/patches-2.6.36/116-sidewinder_fis_location.patch @@ -1,6 +1,6 @@ --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c -@@ -13,6 +13,8 @@ +@@ -31,6 +31,8 @@ #define BOARD_CONFIG_PART "boardconfig" @@ -9,7 +9,7 @@ struct fis_image_desc { unsigned char name[16]; // Null terminated name uint32_t flash_base; // Address within FLASH of image -@@ -30,7 +32,8 @@ struct fis_list { +@@ -48,7 +50,8 @@ struct fis_list { struct fis_list *next; }; @@ -19,7 +19,7 @@ module_param(directory, int, 0); static inline int redboot_checksum(struct fis_image_desc *img) -@@ -59,6 +62,8 @@ static int parse_redboot_partitions(stru +@@ -77,6 +80,8 @@ static int parse_redboot_partitions(stru #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED static char nullstring[] = "unallocated"; #endif diff --git a/target/linux/ixp4xx/patches-2.6.36/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.36/120-compex_support.patch index 3a26afec6f..c549314957 100644 --- a/target/linux/ixp4xx/patches-2.6.36/120-compex_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/120-compex_support.patch @@ -32,16 +32,16 @@ Signed-off-by: Imre Kaloz help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302 - obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o +@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o + obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o +obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-y += common.o -@@ -37,6 +38,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o - obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o +@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_ + obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o +obj-$(CONFIG_MACH_COMPEX) += compex-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.36/130-wrt300nv2_support.patch index c184a6c6c8..865bb9d972 100644 --- a/target/linux/ixp4xx/patches-2.6.36/130-wrt300nv2_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/130-wrt300nv2_support.patch @@ -17,7 +17,7 @@ help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o +@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += v obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o @@ -25,7 +25,7 @@ obj-y += common.o -@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_ +@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulca obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o obj-$(CONFIG_MACH_COMPEX) += compex-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.36/150-lanready_ap1000_support.patch index 1dd31e70ee..16f19baf23 100644 --- a/target/linux/ixp4xx/patches-2.6.36/150-lanready_ap1000_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/150-lanready_ap1000_support.patch @@ -182,7 +182,7 @@ help --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron +@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o @@ -190,7 +190,7 @@ obj-y += common.o -@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor +@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.36/180-tw5334_support.patch index bed2c5dba3..e92d4614a0 100644 --- a/target/linux/ixp4xx/patches-2.6.36/180-tw5334_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/180-tw5334_support.patch @@ -17,7 +17,7 @@ prompt "NAS100D" --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid +@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o @@ -25,7 +25,7 @@ obj-y += common.o -@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin +@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch index d87738097d..d85d3d1132 100644 --- a/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/185-mi424wr_support.patch @@ -421,7 +421,7 @@ + --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42 +@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42 obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o @@ -429,7 +429,7 @@ obj-y += common.o -@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu +@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o @@ -439,7 +439,7 @@ obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -235,6 +235,13 @@ config MACH_GTWX5715 +@@ -243,6 +243,13 @@ config MACH_GTWX5715 "High Speed" UART is n/c (as far as I can tell) 20 Pin ARM/Xscale JTAG interface on J2 diff --git a/target/linux/ixp4xx/patches-2.6.36/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.36/190-cambria_support.patch index 6753451bed..683d8be68a 100644 --- a/target/linux/ixp4xx/patches-2.6.36/190-cambria_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/190-cambria_support.patch @@ -524,7 +524,7 @@ config MACH_LOFT bool "Loft" depends on MACH_AVILA -@@ -214,7 +222,7 @@ config CPU_IXP46X +@@ -222,7 +230,7 @@ config CPU_IXP46X config CPU_IXP43X bool @@ -543,7 +543,7 @@ obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o -@@ -29,6 +30,7 @@ obj-y += common.o +@@ -30,6 +31,7 @@ obj-y += common.o obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o obj-$(CONFIG_MACH_AVILA) += avila-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/191-cambria_optional_uart.patch b/target/linux/ixp4xx/patches-2.6.36/191-cambria_optional_uart.patch index 98eca4a575..6ce151d5bf 100644 --- a/target/linux/ixp4xx/patches-2.6.36/191-cambria_optional_uart.patch +++ b/target/linux/ixp4xx/patches-2.6.36/191-cambria_optional_uart.patch @@ -106,7 +106,7 @@ unsigned int type; /* If UPF_FIXED_TYPE */ --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h -@@ -293,6 +293,7 @@ struct uart_port { +@@ -306,6 +306,7 @@ struct uart_port { #define UPIO_TSI (5) /* Tsi108/109 type IO */ #define UPIO_DWAPB (6) /* DesignWare APB UART */ #define UPIO_RM9000 (7) /* RM9000 type IO */ @@ -114,7 +114,7 @@ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ -@@ -335,6 +336,7 @@ struct uart_port { +@@ -348,6 +349,7 @@ struct uart_port { unsigned int mctrl; /* current modem ctrl settings */ unsigned int timeout; /* character-based timeout */ @@ -199,7 +199,7 @@ uart->port.dev = port->dev; --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c -@@ -2144,6 +2144,7 @@ uart_report_port(struct uart_driver *drv +@@ -2122,6 +2122,7 @@ uart_report_port(struct uart_driver *drv snprintf(address, sizeof(address), "I/O 0x%lx offset 0x%x", port->iobase, port->hub6); break; @@ -207,7 +207,7 @@ case UPIO_MEM: case UPIO_MEM32: case UPIO_AU: -@@ -2557,6 +2558,7 @@ int uart_match_port(struct uart_port *po +@@ -2541,6 +2542,7 @@ int uart_match_port(struct uart_port *po case UPIO_HUB6: return (port1->iobase == port2->iobase) && (port1->hub6 == port2->hub6); diff --git a/target/linux/ixp4xx/patches-2.6.36/193-cambria_pld_gpio.patch b/target/linux/ixp4xx/patches-2.6.36/193-cambria_pld_gpio.patch index 299630f171..171898d6c7 100644 --- a/target/linux/ixp4xx/patches-2.6.36/193-cambria_pld_gpio.patch +++ b/target/linux/ixp4xx/patches-2.6.36/193-cambria_pld_gpio.patch @@ -90,7 +90,7 @@ } static struct cambria_board_info cambria_boards[] __initdata = { -@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata +@@ -460,6 +507,14 @@ static struct i2c_board_info __initdata I2C_BOARD_INFO("24c08", 0x51), .platform_data = &cambria_eeprom_info }, diff --git a/target/linux/ixp4xx/patches-2.6.36/203-npe_driver_mask_phy_features.patch b/target/linux/ixp4xx/patches-2.6.36/203-npe_driver_mask_phy_features.patch index b8ef217c76..54e3fd0c10 100644 --- a/target/linux/ixp4xx/patches-2.6.36/203-npe_driver_mask_phy_features.patch +++ b/target/linux/ixp4xx/patches-2.6.36/203-npe_driver_mask_phy_features.patch @@ -1,6 +1,6 @@ --- a/drivers/net/arm/ixp4xx_eth.c +++ b/drivers/net/arm/ixp4xx_eth.c -@@ -1220,6 +1220,10 @@ static int __devinit eth_init_one(struct +@@ -1232,6 +1232,10 @@ static int __devinit eth_init_one(struct if ((err = IS_ERR(port->phydev))) goto err_free_mem; diff --git a/target/linux/ixp4xx/patches-2.6.36/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-2.6.36/205-npe_driver_separate_phy_functions.patch index 140ebb731e..10e8cbe027 100644 --- a/target/linux/ixp4xx/patches-2.6.36/205-npe_driver_separate_phy_functions.patch +++ b/target/linux/ixp4xx/patches-2.6.36/205-npe_driver_separate_phy_functions.patch @@ -51,7 +51,7 @@ static inline void debug_pkt(struct net_device *dev, const char *func, u8 *data, int len) -@@ -1008,8 +1052,7 @@ static int eth_open(struct net_device *d +@@ -1020,8 +1064,7 @@ static int eth_open(struct net_device *d return err; } @@ -61,7 +61,7 @@ for (i = 0; i < ETH_ALEN; i++) __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]); -@@ -1130,7 +1173,7 @@ static int eth_close(struct net_device * +@@ -1142,7 +1185,7 @@ static int eth_close(struct net_device * printk(KERN_CRIT "%s: unable to disable loopback\n", dev->name); @@ -70,7 +70,7 @@ if (!ports_open) qmgr_disable_irq(TXDONE_QUEUE); -@@ -1156,7 +1199,6 @@ static int __devinit eth_init_one(struct +@@ -1168,7 +1211,6 @@ static int __devinit eth_init_one(struct struct net_device *dev; struct eth_plat_info *plat = pdev->dev.platform_data; u32 regs_phys; @@ -78,7 +78,7 @@ int err; if (!(dev = alloc_etherdev(sizeof(struct port)))) -@@ -1214,18 +1256,10 @@ static int __devinit eth_init_one(struct +@@ -1226,18 +1268,10 @@ static int __devinit eth_init_one(struct __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control); udelay(50); @@ -99,7 +99,7 @@ if ((err = register_netdev(dev))) goto err_phy_dis; -@@ -1235,7 +1269,7 @@ static int __devinit eth_init_one(struct +@@ -1247,7 +1281,7 @@ static int __devinit eth_init_one(struct return 0; err_phy_dis: @@ -108,7 +108,7 @@ err_free_mem: npe_port_tab[NPE_ID(port->id)] = NULL; platform_set_drvdata(pdev, NULL); -@@ -1253,7 +1287,7 @@ static int __devexit eth_remove_one(stru +@@ -1265,7 +1299,7 @@ static int __devexit eth_remove_one(stru struct port *port = netdev_priv(dev); unregister_netdev(dev); diff --git a/target/linux/ixp4xx/patches-2.6.36/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-2.6.36/206-npe_driver_add_update_link_function.patch index 7ae1a8404d..6e5b7e000b 100644 --- a/target/linux/ixp4xx/patches-2.6.36/206-npe_driver_add_update_link_function.patch +++ b/target/linux/ixp4xx/patches-2.6.36/206-npe_driver_add_update_link_function.patch @@ -85,7 +85,7 @@ phy_start(port->phydev); } -@@ -1263,6 +1277,10 @@ static int __devinit eth_init_one(struct +@@ -1275,6 +1289,10 @@ static int __devinit eth_init_one(struct if ((err = register_netdev(dev))) goto err_phy_dis; diff --git a/target/linux/ixp4xx/patches-2.6.36/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-2.6.36/304-ixp4xx_eth_jumboframe.patch index 09aeb9ffc8..9da18e7b9b 100644 --- a/target/linux/ixp4xx/patches-2.6.36/304-ixp4xx_eth_jumboframe.patch +++ b/target/linux/ixp4xx/patches-2.6.36/304-ixp4xx_eth_jumboframe.patch @@ -9,7 +9,7 @@ #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4) #define NAPI_WEIGHT 16 -@@ -1064,6 +1064,32 @@ static void destroy_queues(struct port * +@@ -1075,6 +1075,32 @@ static void destroy_queues(struct port * } } @@ -42,7 +42,7 @@ static int eth_open(struct net_device *dev) { struct port *port = netdev_priv(dev); -@@ -1115,6 +1141,8 @@ static int eth_open(struct net_device *d +@@ -1126,6 +1152,8 @@ static int eth_open(struct net_device *d if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE")) return -EIO; @@ -51,7 +51,7 @@ if ((err = request_queues(port)) != 0) return err; -@@ -1254,7 +1282,26 @@ static int eth_close(struct net_device * +@@ -1265,7 +1293,26 @@ static int eth_close(struct net_device * return 0; } diff --git a/target/linux/ixp4xx/patches-2.6.36/500-usr8200_support.patch b/target/linux/ixp4xx/patches-2.6.36/500-usr8200_support.patch index 2d78425f45..e757ff301c 100644 --- a/target/linux/ixp4xx/patches-2.6.36/500-usr8200_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/500-usr8200_support.patch @@ -17,7 +17,7 @@ select PCI --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt +@@ -26,6 +26,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o @@ -25,7 +25,7 @@ obj-y += common.o -@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv +@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o diff --git a/target/linux/ixp4xx/patches-2.6.36/520-tw2662_support.patch b/target/linux/ixp4xx/patches-2.6.36/520-tw2662_support.patch index 7bef1d4080..3fde579c10 100644 --- a/target/linux/ixp4xx/patches-2.6.36/520-tw2662_support.patch +++ b/target/linux/ixp4xx/patches-2.6.36/520-tw2662_support.patch @@ -18,7 +18,7 @@ select PCI --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid +@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o @@ -26,7 +26,7 @@ obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o -@@ -48,6 +49,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin +@@ -50,6 +51,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin obj-$(CONFIG_MACH_COMPEX) += compex-setup.o obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o