From: Gabor Juhos <juhosg@openwrt.org>
Date: Tue, 25 Sep 2007 08:34:30 +0000 (+0000)
Subject: [brcm-2.4] fix vlan configuration on Dell TrueMobile 2300
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;h=4366879feecd1e25f5310652de4ec3fb35868e6a;hp=9c0f10b6af95620542ec73f39da9a562d68ff1a4

[brcm-2.4] fix vlan configuration on Dell TrueMobile 2300

SVN-Revision: 9015
---

diff --git a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
index 2b56963365..643ba35d31 100755
--- a/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/default/etc/init.d/netconfig
@@ -47,11 +47,11 @@ start() {
 			mac_check = mac_check "[0-9a-fA-F][0-9a-fA-F]"
 		}
 	}
-	
+
 	($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") || ($1 ~ /macaddr/) {
 		nvram[$1] = $2
 	}
-	
+
 	END {
 		if ((model == "ASUS WL-HDD") || (model == "ASUS WL-300g") || (model == "Linksys WAP54G V1")) {
 			c["wan_ifname"] = ""
@@ -61,6 +61,10 @@ start() {
 			c["wan_ifname"] = "eth1"
 			c["lan_ifname"] = "eth0"
 		}
+		if (model == "Dell TrueMobile 2300") {
+			c["vlan0ports"] = "0 1 2 3 5*"
+			c["vlan1ports"] = "4 5"
+		}
 		if (nvram["boardtype"] == "bcm94710r4") {
 			# Toshiba WRC-1000
 			c["lan_ifname"] = "eth0"
@@ -100,10 +104,10 @@ start() {
 			c["lan_ifname"]="eth0"
 			c["wan_ifname"]=""
 		}
-	
+
 		# ASUS WL-700gE
 		# These are actually same as defaults above. For some reason this script applies
-		# Generic BCM94704 settings instead so we revert to proper settings here.	
+		# Generic BCM94704 settings instead so we revert to proper settings here.
 		# Hopefully someone will fix this properly soon.
 		if (model == "ASUS WL-700gE") {
 			c["lan_ifname"]="eth0.0"
@@ -116,7 +120,7 @@ start() {
 			c["vlan0ports"]="0 1 2 3 5*"
 			c["vlan1ports"]="4 5"
 		}
-		
+
 		print "#### VLAN configuration "
 		print "config switch eth0"
 		p("vlan0", "vlan0ports")