From: Mazi Lo <OpenWRT@slickdeals.endjunk.com>
Date: Fri, 17 Jun 2011 15:43:02 +0000 (+0000)
Subject: fixed some mangling configuration files
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;h=5bb40e69ab30943db3335921c464fd0f86eaf32d

fixed some mangling configuration files

SVN-Revision: 27203
---

diff --git a/net/freeswitch/files/etc.minimal/autoload_configs/syslog.conf.xml b/net/freeswitch/files/etc.minimal/autoload_configs/syslog.conf.xml
deleted file mode 100644
index 636a12c8c1..0000000000
--- a/net/freeswitch/files/etc.minimal/autoload_configs/syslog.conf.xml
+++ /dev/null
@@ -1,18 +0,0 @@
-<configuration name="syslog.conf" description="Syslog Logger">
-  <!-- SYSLOG -->
-  <!-- emerg   - system is unusable  -->
-  <!-- alert   - action must be taken immediately  -->
-  <!-- crit    - critical conditions  -->
-  <!-- err     - error conditions  -->
-  <!-- warning - warning conditions  -->
-  <!-- notice  - normal, but significant, condition  -->
-  <!-- info    - informational message  -->
-  <!-- debug   - debug-level message -->
-  <settings>
-    <param name="facility" value="user"/>
-    <param name="ident" value="freeswitch"/>
-    <param name="loglevel" value="warning"/>
-	<!-- Uncomment the following line to log uuids in syslogs (when applicable) -->
-    <!-- <param name="uuid" value="true"/> -->
-  </settings>
-</configuration>
diff --git a/net/freeswitch/files/etc.minimal/autoload_configs/xml_cdr.conf.xml b/net/freeswitch/files/etc.minimal/autoload_configs/xml_cdr.conf.xml
deleted file mode 100644
index 6f8ef0deb5..0000000000
--- a/net/freeswitch/files/etc.minimal/autoload_configs/xml_cdr.conf.xml
+++ /dev/null
@@ -1,71 +0,0 @@
-<configuration name="xml_cdr.conf" description="XML CDR CURL logger">
-  <settings>
-    <!-- the url to post to if blank web posting is disabled  -->
-    <!-- <param name="url" value="http://localhost/cdr_curl/post.php"/> -->
-
-    <!-- optional: credentials to send to web server -->
-    <!--    <param name="cred" value="user:pass"/> -->
-
-    <!-- the total number of retries (not counting the first 'try') to post to webserver incase of failure -->
-    <!-- <param name="retries" value="2"/> -->
-
-    <!-- delay between retries in seconds, default is 5 seconds -->
-    <!-- <param name="delay" value="1"/> -->
-
-    <!-- Log via http and on disk, default is false -->
-    <!-- <param name="log-http-and-disk" value="true"/> -->
-
-    <!-- optional: if not present we do not log every record to disk -->
-    <!-- either an absolute path, a relative path assuming ${prefix}/logs or a blank value will default to ${prefix}/logs/xml_cdr -->
-    <param name="log-dir" value=""/>
-
-    <!-- optional: if not present we do log the b leg -->
-    <!-- true or false if we should create a cdr for the b leg of a call-->
-    <param name="log-b-leg" value="false"/>
-    
-    <!-- optional: if not present, all filenames are the uuid of the call -->
-    <!-- true or false if a leg files are prefixed "a_" -->
-    <param name="prefix-a-leg" value="true"/>
-
-    <!-- encode the post data may be 'true' for url encoding, 'false' for no encoding or 'base64' for base64 encoding -->
-    <param name="encode" value="true"/>
-
-    <!-- optional: set to true to disable Expect: 100-continue lighttpd requires this setting --> 
-    <!--<param name="disable-100-continue" value="true"/>--> 
-    
-    <!-- optional: full path to the error log dir for failed web posts if not specified its the same as log-dir -->
-    <!-- either an absolute path, a relative path assuming ${prefix}/logs or a blank or omitted value will default to ${prefix}/logs/xml_cdr -->
-    <!-- <param name="err-log-dir" value="/tmp"/> -->
-
-    <!-- which auhtentification scheme to use. Supported values are: basic, digest, NTLM, GSS-NEGOTIATE or "any" for automatic detection -->
-    <!--<param name="auth-scheme" value="basic"/>--> 
-
-    <!-- optional: this will enable the CA root certificate check by libcurl to
-         verify that the certificate was issued by a major Certificate Authority.
-         note: default value is disabled. only enable if you want this! -->
-    <!--<param name="enable-cacert-check" value="true"/>-->
-    <!-- optional: verify that the server is actually the one listed in the cert -->
-    <!-- <param name="enable-ssl-verifyhost" value="true"/> -->
-
-    <!-- optional: these options can be used to specify custom SSL certificates
-         to use for HTTPS communications. Either use both options or neither.
-         Specify your public key with 'ssl-cert-path' and the private key with
-         'ssl-key-path'. If your private key has a password, specify it with
-         'ssl-key-password'. -->
-    <!-- <param name="ssl-cert-path" value="$${base_dir}/conf/certs/public_key.pem"/> -->
-    <!-- <param name="ssl-key-path" value="$${base_dir}/conf/certs/private_key.pem"/> -->
-    <!-- <param name="ssl-key-password" value="MyPrivateKeyPassword"/> -->
-
-    <!-- optional: use a custom CA certificate in PEM format to verify the peer
-         with. This is useful if you are acting as your own certificate authority.
-         note: only makes sense if used in combination with "enable-cacert-check." -->
-    <!-- <param name="ssl-cacert-file" value="$${base_dir}/conf/certs/cacert.pem"/> -->
-
-    <!-- optional: specify the SSL version to force HTTPS to use. Valid options are
-         "SSLv3" and "TLSv1". Otherwise libcurl will auto-negotiate the version. -->
-    <!-- <param name="ssl-version" value="TLSv1"/> -->
-
-    <!-- optional: enables cookies and stores them in the specified file. -->
-    <!-- <param name="cookie-file" value="/tmp/cookie-mod_xml_curl.txt"/> -->
-  </settings>
-</configuration>