From: Florian Fainelli Date: Tue, 10 Apr 2007 21:46:29 +0000 (+0000) Subject: Ajoute le support easygate X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;h=927b39163bc5bf3496f96a9df370b03bb89b2f69 Ajoute le support easygate SVN-Revision: 6926 --- diff --git a/target/linux/easygate-2.6/Makefile b/target/linux/easygate-2.6/Makefile new file mode 100644 index 0000000000..3659b497a0 --- /dev/null +++ b/target/linux/easygate-2.6/Makefile @@ -0,0 +1,23 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=mips +BOARD:=easygate +BOARDNAME:=9Cegetel Easygate +FEATURES:=squashfs jffs2 usb atm + +define Target/Description + Build firmware images for 9Cegetel EasyGate +endef + +include $(INCLUDE_DIR)/kernel-build.mk + +# include the profiles +-include profiles/*.mk + +$(eval $(call BuildKernel)) diff --git a/target/linux/easygate-2.6/config/default b/target/linux/easygate-2.6/config/default new file mode 100644 index 0000000000..fb385d99c7 --- /dev/null +++ b/target/linux/easygate-2.6/config/default @@ -0,0 +1,377 @@ +CONFIG_32BIT=y +# CONFIG_64BIT is not set +# CONFIG_64BIT_PHYS_ADDR is not set +# CONFIG_8139TOO is not set +CONFIG_AUDIT=y +CONFIG_AUDIT_GENERIC=y +# CONFIG_B44 is not set +CONFIG_BASE_SMALL=0 +CONFIG_BCM963XX=y +CONFIG_BINFMT_MISC=m +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_IO_TRACE=y +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BSD_DISKLABEL is not set +CONFIG_BSD_PROCESS_ACCT_V3=y +# CONFIG_BT_CMTP is not set +CONFIG_CFE=y +CONFIG_CICADA_PHY=m +# CONFIG_CIFS is not set +# CONFIG_CLS_U32_MARK is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +CONFIG_CPU_MIPSR1=y +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_VR41XX is not set +CONFIG_CRAMFS=y +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_KHAZAD is not set +CONFIG_CRYPTO_MD4=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_SHA1=y +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_DAVICOM_PHY=m +# CONFIG_DDB5477 is not set +# CONFIG_DEBUG_DRIVER is not set +CONFIG_DEBUG_FS=y +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_DEFAULT_BIC=y +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_DEFAULT_TCP_CONG="bic" +# CONFIG_DEFAULT_VEGAS is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DLM is not set +# CONFIG_DM9000 is not set +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DNOTIFY=y +CONFIG_DUMMY=m +CONFIG_ELF_CORE=y +CONFIG_EQUALIZER=m +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_FIRMWARE_EDID=y +# CONFIG_FIXED_PHY is not set +CONFIG_FORCED_INLINING=y +CONFIG_FS_POSIX_ACL=y +CONFIG_FW_LOADER=m +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_GEN_RTC is not set +# CONFIG_HAMRADIO is not set +CONFIG_HWMON=y +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +# CONFIG_HZ_1024 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_48 is not set +# CONFIG_I2C is not set +# CONFIG_IDE is not set +CONFIG_INITRAMFS_ROOT_GID=0 +CONFIG_INITRAMFS_ROOT_UID=0 +CONFIG_INITRAMFS_SOURCE="../../root" +CONFIG_INPUT=m +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_KEYBOARD=y +CONFIG_INPUT_MOUSE=y +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_IOSCHED_CFQ=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_TUNNEL=m +# CONFIG_IP_DCCP_DEBUG is not set +CONFIG_IP_MROUTE=y +CONFIG_IP_NF_NAT_SNMP_BASIC=m +CONFIG_IP_NF_NAT_TFTP=y +CONFIG_IP_NF_NETBIOS_NS=m +CONFIG_IP_NF_TARGET_CLUSTERIP=m +CONFIG_IP_NF_TFTP=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +# CONFIG_IP_ROUTE_FWMARK is not set +CONFIG_IP_SCTP=m +CONFIG_IRQ_CPU=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFS_FS is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KGDB is not set +CONFIG_KMOD=y +# CONFIG_LAN_SAA9730 is not set +CONFIG_LBD=y +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LLC2 is not set +CONFIG_LXT_PHY=m +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MARVELL_PHY=m +CONFIG_MII=m +# CONFIG_MINIX_FS is not set +CONFIG_MINI_FO=y +CONFIG_MIPS=y +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_EV64120 is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_MTX1 is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_SEAD is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_MIPS_UNCACHED is not set +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MOMENCO_JAGUAR_ATX is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_MOMENCO_OCELOT_3 is not set +# CONFIG_MOMENCO_OCELOT_C is not set +# CONFIG_MOMENCO_OCELOT_G is not set +CONFIG_MOUSE_PS2=m +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_VSXXXAA is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_BCM963XX is not set +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_CFI_UTIL=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_DEBUG=y +CONFIG_MTD_DEBUG_VERBOSE=1 +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PHRAM is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +CONFIG_MTD_PHYSMAP_LEN=0x800000 +CONFIG_MTD_PHYSMAP_START=0x1f000000 +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_PARTS_READONLY=y +CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +# CONFIG_NET_ACT_IPT is not set +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_KEY=y +CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y +# CONFIG_NET_SCH_CLK_JIFFIES is not set +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_NLS=y +CONFIG_NLS_ASCII=m +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NTFS_FS is not set +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_64KB is not set +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PCI_DEBUG is not set +CONFIG_PHYLIB=m +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_V2PCI is not set +CONFIG_POSIX_MQUEUE=y +# CONFIG_PROVE_LOCKING is not set +CONFIG_QSEMI_PHY=m +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_REISERFS_FS is not set +CONFIG_RELAY=y +# CONFIG_ROMFS_FS is not set +# CONFIG_RTC is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_SCHEDSTATS is not set +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +CONFIG_SCTP_HMAC_MD5=y +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIO=m +CONFIG_SERIO_I8042=m +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_PCIPS2 is not set +# CONFIG_SERIO_RAW is not set +CONFIG_SERIO_SERPORT=m +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP32 is not set +CONFIG_SHAPER=m +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_PTSWARM is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SMB_FS is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_SOUND is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_SQUASHFS_VMALLOC=y +CONFIG_SYN_COOKIES=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_TCP_CONG_BIC=y +# CONFIG_TCP_CONG_HSTCP is not set +# CONFIG_TCP_CONG_HYBLA is not set +# CONFIG_TCP_CONG_LP is not set +# CONFIG_TCP_CONG_SCALABLE is not set +# CONFIG_TCP_CONG_VEGAS is not set +# CONFIG_TCP_CONG_VENO is not set +CONFIG_TIPC=m +# CONFIG_TIPC_ADVANCED is not set +# CONFIG_TIPC_DEBUG is not set +# CONFIG_TOSHIBA_JMR3927 is not set +# CONFIG_TOSHIBA_RBTX4927 is not set +# CONFIG_TOSHIBA_RBTX4938 is not set +CONFIG_TRAD_SIGNALS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_VIA_RHINE is not set +CONFIG_VLAN_8021Q=m +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_WAN_ROUTER=m +# CONFIG_WATCHDOG is not set +# CONFIG_XFS_FS is not set diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/Makefile b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/Makefile new file mode 100644 index 0000000000..aa3654ae50 --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the Broadcom BCM963xx SoC specific parts of the kernel +# +# Copyright (C) 2004 Broadcom Corporation +# +obj-y := irq.o prom.o setup.o time.o ser_init.o int-handler.o info.o + +SRCBASE := $(TOPDIR) +EXTRA_CFLAGS += -I$(SRCBASE)/include diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/cfe_env.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/cfe_env.c new file mode 100644 index 0000000000..c1d5eeef59 --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/cfe_env.c @@ -0,0 +1,229 @@ +/* + * CFE environment variable access + * + * Copyright 2001-2003, Broadcom Corporation + * Copyright 2006, Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#define NVRAM_SIZE (0x1ff0) +static char _nvdata[NVRAM_SIZE]; +static char _valuestr[256]; + +/* + * TLV types. These codes are used in the "type-length-value" + * encoding of the items stored in the NVRAM device (flash or EEPROM) + * + * The layout of the flash/nvram is as follows: + * + * + * + * The type code of "ENV_TLV_TYPE_END" marks the end of the list. + * The "length" field marks the length of the data section, not + * including the type and length fields. + * + * Environment variables are stored as follows: + * + * = + * + * If bit 0 (low bit) is set, the length is an 8-bit value. + * If bit 0 (low bit) is clear, the length is a 16-bit value + * + * Bit 7 set indicates "user" TLVs. In this case, bit 0 still + * indicates the size of the length field. + * + * Flags are from the constants below: + * + */ +#define ENV_LENGTH_16BITS 0x00 /* for low bit */ +#define ENV_LENGTH_8BITS 0x01 + +#define ENV_TYPE_USER 0x80 + +#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) +#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) + +/* + * The actual TLV types we support + */ + +#define ENV_TLV_TYPE_END 0x00 +#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) + +/* + * Environment variable flags + */ + +#define ENV_FLG_NORMAL 0x00 /* normal read/write */ +#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ +#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ + +#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ +#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ + + +/* ********************************************************************* + * _nvram_read(buffer,offset,length) + * + * Read data from the NVRAM device + * + * Input parameters: + * buffer - destination buffer + * offset - offset of data to read + * length - number of bytes to read + * + * Return value: + * number of bytes read, or <0 if error occured + ********************************************************************* */ +static int +_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) +{ + int i; + if (offset > NVRAM_SIZE) + return -1; + + for ( i = 0; i < length; i++) { + buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; + } + return length; +} + + +static char* +_strnchr(const char *dest,int c,size_t cnt) +{ + while (*dest && (cnt > 0)) { + if (*dest == c) return (char *) dest; + dest++; + cnt--; + } + return NULL; +} + + + +/* + * Core support API: Externally visible. + */ + +/* + * Get the value of an NVRAM variable + * @param name name of variable to get + * @return value of variable or NULL if undefined + */ + +char* +cfe_env_get(unsigned char *nv_buf, char* name) +{ + int size; + unsigned char *buffer; + unsigned char *ptr; + unsigned char *envval; + unsigned int reclen; + unsigned int rectype; + int offset; + int flg; + + if (!strcmp(name, "nvram_type")) + return "cfe"; + + size = NVRAM_SIZE; + buffer = &_nvdata[0]; + + ptr = buffer; + offset = 0; + + /* Read the record type and length */ + if (_nvram_read(nv_buf, ptr,offset,1) != 1) { + goto error; + } + + while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { + + /* Adjust pointer for TLV type */ + rectype = *(ptr); + offset++; + size--; + + /* + * Read the length. It can be either 1 or 2 bytes + * depending on the code + */ + if (rectype & ENV_LENGTH_8BITS) { + /* Read the record type and length - 8 bits */ + if (_nvram_read(nv_buf, ptr,offset,1) != 1) { + goto error; + } + reclen = *(ptr); + size--; + offset++; + } + else { + /* Read the record type and length - 16 bits, MSB first */ + if (_nvram_read(nv_buf, ptr,offset,2) != 2) { + goto error; + } + reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); + size -= 2; + offset += 2; + } + + if (reclen > size) + break; /* should not happen, bad NVRAM */ + + switch (rectype) { + case ENV_TLV_TYPE_ENV: + /* Read the TLV data */ + if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) + goto error; + flg = *ptr++; + envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); + if (envval) { + *envval++ = '\0'; + memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); + _valuestr[(reclen-1)-(envval-ptr)] = '\0'; +#if 0 + printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); +#endif + if(!strcmp(ptr, name)){ + return _valuestr; + } + if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) + return _valuestr; + } + break; + + default: + /* Unknown TLV type, skip it. */ + break; + } + + /* + * Advance to next TLV + */ + + size -= (int)reclen; + offset += reclen; + + /* Read the next record type */ + ptr = buffer; + if (_nvram_read(nv_buf, ptr,offset,1) != 1) + goto error; + } + +error: + return NULL; + +} + diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/info.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/info.c new file mode 100644 index 0000000000..47a855d78a --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/info.c @@ -0,0 +1,102 @@ +/* + * $Id$ + * + * Copyright (C) 2007 OpenWrt.org + * Copyright (C) 2007 Gabor Juhos + * Copyright (C) 2007 Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static char *boot_loader_names[BOOT_LOADER_LAST+1] = { + [BOOT_LOADER_UNKNOWN] = "Unknown", + [BOOT_LOADER_CFE] = "CFE", + [BOOT_LOADER_REDBOOT] = "RedBoot", + [BOOT_LOADER_CFE2] = "CFEv2" +}; + +/* boot loaders specific definitions */ +#define CFE_EPTSEAL 0x43464531 /* CFE1 is the magic number to recognize CFE from other bootloaders */ + +int boot_loader_type; +/* + * Boot loader detection routines + */ +static int __init detect_cfe(void) +{ + /* + * This method only works, when we are booted directly from the CFE. + */ + uint32_t cfe_handle = (uint32_t) fw_arg0; + uint32_t cfe_a1_val = (uint32_t) fw_arg1; + uint32_t cfe_entry = (uint32_t) fw_arg2; + uint32_t cfe_seal = (uint32_t) fw_arg3; + + /* Check for CFE by finding the CFE magic number */ + if (cfe_seal != CFE_EPTSEAL) + /* We are not booted from CFE */ + return 0; + + /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 SoC */ + if (cfe_a1_val != 0) + return 0; + + /* The cfe_handle, and the cfe_entry must be kernel mode addresses */ + if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0)) + return 0; + + return 1; +} + +static int __init detect_redboot(void) +{ + /* On Inventel Livebox, the boot loader is passed as a command line argument, check for it */ + if (!strncmp(arcs_cmdline, "boot_loader=RedBoot", 19)) + return 1; + return 0; +} + +void __init detect_bootloader(void) +{ + if (detect_cfe()) { + boot_loader_type = BOOT_LOADER_CFE; + } + + if (detect_redboot()) { + boot_loader_type = BOOT_LOADER_REDBOOT; + } + else { + /* Some devices are using CFE, but it is not detected as is */ + boot_loader_type = BOOT_LOADER_CFE2; + } + printk("Boot loader is : %s\n", boot_loader_names[boot_loader_type]); +} + +void __init detect_board(void) +{ + switch (boot_loader_type) + { + case BOOT_LOADER_CFE: + break; + case BOOT_LOADER_REDBOOT: + break; + default: + break; + } +} + +EXPORT_SYMBOL(boot_loader_type); diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/int-handler.S b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/int-handler.S new file mode 100644 index 0000000000..a7a9c9d20c --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/int-handler.S @@ -0,0 +1,59 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Generic interrupt handler for Broadcom MIPS boards + */ + +#include + +#include +#include +#include +#include + +/* + * MIPS IRQ Source + * -------- ------ + * 0 Software (ignored) + * 1 Software (ignored) + * 2 Combined hardware interrupt (hw0) + * 3 Hardware + * 4 Hardware + * 5 Hardware + * 6 Hardware + * 7 R4k timer + */ + + .text + .set noreorder + .set noat + .align 5 + NESTED(brcmIRQ, PT_SIZE, sp) + SAVE_ALL + CLI + .set noreorder + .set at + + jal plat_irq_dispatch + move a0, sp + + j ret_from_irq + nop + + END(brcmIRQ) diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/irq.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/irq.c new file mode 100644 index 0000000000..962cd374dd --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/irq.c @@ -0,0 +1,258 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Interrupt control functions for Broadcom 963xx MIPS boards + */ + +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include <6348_map_part.h> +#include <6348_intr.h> +#include +#include + +static void irq_dispatch_int(struct pt_regs *regs) +{ + unsigned int pendingIrqs; + static unsigned int irqBit; + static unsigned int isrNumber = 31; + + pendingIrqs = PERF->IrqStatus & PERF->IrqMask; + if (!pendingIrqs) { + return; + } + + while (1) { + irqBit <<= 1; + isrNumber++; + if (isrNumber == 32) { + isrNumber = 0; + irqBit = 0x1; + } + if (pendingIrqs & irqBit) { + PERF->IrqMask &= ~irqBit; // mask + do_IRQ(isrNumber + INTERNAL_ISR_TABLE_OFFSET); + break; + } + } +} + +static void irq_dispatch_ext(uint32 irq) +{ + if (!(PERF->ExtIrqCfg & (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)))) { + printk("**** Ext IRQ mask. Should not dispatch ****\n"); + } + /* disable and clear interrupt in the controller */ + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); + do_IRQ(irq); +} + + +extern void brcm_timer_interrupt(struct pt_regs *regs); + +asmlinkage void plat_irq_dispatch(struct pt_regs *regs) +{ + u32 cause; + while((cause = (read_c0_cause()& CAUSEF_IP))) { + if (cause & CAUSEF_IP7) + brcm_timer_interrupt(regs); + else if (cause & CAUSEF_IP2) + irq_dispatch_int(regs); + else if (cause & CAUSEF_IP3) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_0); + else if (cause & CAUSEF_IP4) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_1); + else if (cause & CAUSEF_IP5) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_2); + else if (cause & CAUSEF_IP6) + irq_dispatch_ext(INTERRUPT_ID_EXTERNAL_3); + local_irq_disable(); + } +} + + +void enable_brcm_irq(unsigned int irq) +{ + unsigned long flags; + + local_irq_save(flags); + if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { + PERF->IrqMask |= (1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); + } + else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { + /* enable and clear interrupt in the controller */ + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); + } + local_irq_restore(flags); +} + +void disable_brcm_irq(unsigned int irq) +{ + unsigned long flags; + + local_irq_save(flags); + if( irq >= INTERNAL_ISR_TABLE_OFFSET ) { + PERF->IrqMask &= ~(1 << (irq - INTERNAL_ISR_TABLE_OFFSET)); + } + else if (irq >= INTERRUPT_ID_EXTERNAL_0 && irq <= INTERRUPT_ID_EXTERNAL_3) { + /* disable interrupt in the controller */ + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); + } + local_irq_restore(flags); +} + +void ack_brcm_irq(unsigned int irq) +{ + /* Already done in brcm_irq_dispatch */ +} + +unsigned int startup_brcm_irq(unsigned int irq) +{ + enable_brcm_irq(irq); + + return 0; /* never anything pending */ +} + +unsigned int startup_brcm_none(unsigned int irq) +{ + return 0; +} + +void end_brcm_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_brcm_irq(irq); +} + +void end_brcm_none(unsigned int irq) +{ +} + +static struct hw_interrupt_type brcm_irq_type = { + .typename = "MIPS", + .startup = startup_brcm_irq, + .shutdown = disable_brcm_irq, + .enable = enable_brcm_irq, + .disable = disable_brcm_irq, + .ack = ack_brcm_irq, + .end = end_brcm_irq, + .set_affinity = NULL +}; + +static struct hw_interrupt_type brcm_irq_no_end_type = { + .typename = "MIPS", + .startup = startup_brcm_none, + .shutdown = disable_brcm_irq, + .enable = enable_brcm_irq, + .disable = disable_brcm_irq, + .ack = ack_brcm_irq, + .end = end_brcm_none, + .set_affinity = NULL +}; + +void __init arch_init_irq(void) +{ + int i; + + clear_c0_status(ST0_BEV); + change_c0_status(ST0_IM, (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)); + + for (i = 0; i < NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + irq_desc[i].chip = &brcm_irq_type; + } +} + +int request_external_irq(unsigned int irq, + FN_HANDLER handler, + unsigned long irqflags, + const char * devname, + void *dev_id) +{ + unsigned long flags; + + local_irq_save(flags); + + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_CLEAR_SHFT)); // Clear + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_MASK_SHFT)); // Mask + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_INSENS_SHFT)); // Edge insesnsitive + PERF->ExtIrqCfg |= (1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_LEVEL_SHFT)); // Level triggered + PERF->ExtIrqCfg &= ~(1 << (irq - INTERRUPT_ID_EXTERNAL_0 + EI_SENSE_SHFT)); // Low level + + local_irq_restore(flags); + + return( request_irq(irq, handler, irqflags, devname, dev_id) ); +} + +/* VxWorks compatibility function(s). */ + +unsigned int BcmHalMapInterrupt(FN_HANDLER pfunc, unsigned int param, + unsigned int interruptId) +{ + int nRet = -1; + char *devname; + + devname = kmalloc(16, GFP_KERNEL); + if (devname) + sprintf( devname, "brcm_%d", interruptId ); + + /* Set the IRQ description to not automatically enable the interrupt at + * the end of an ISR. The driver that handles the interrupt must + * explicitly call BcmHalInterruptEnable or enable_brcm_irq. This behavior + * is consistent with interrupt handling on VxWorks. + */ + irq_desc[interruptId].chip = &brcm_irq_no_end_type; + + if( interruptId >= INTERNAL_ISR_TABLE_OFFSET ) + { + printk("BcmHalMapInterrupt : internal IRQ\n"); + nRet = request_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, devname, (void *) param ); + } + else if (interruptId >= INTERRUPT_ID_EXTERNAL_0 && interruptId <= INTERRUPT_ID_EXTERNAL_3) + { + printk("BcmHalMapInterrupt : external IRQ\n"); + nRet = request_external_irq( interruptId, pfunc, SA_SAMPLE_RANDOM | SA_INTERRUPT, devname, (void *) param ); + } + + return( nRet ); +} + + +EXPORT_SYMBOL(enable_brcm_irq); +EXPORT_SYMBOL(disable_brcm_irq); +EXPORT_SYMBOL(request_external_irq); +EXPORT_SYMBOL(BcmHalMapInterrupt); + diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/nvram.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/nvram.c new file mode 100644 index 0000000000..cef2b14c5c --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/nvram.c @@ -0,0 +1,129 @@ +/* + * BCM947xx nvram variable access + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MB * 1048576 + +#define WINDOW_ADDR 0x1F000000 +#define WINDOW_SIZE 0x800000 + +static char nvram_buf[NVRAM_SPACE]; +static int cfe_env; +extern char *cfe_env_get(char *nv_buf, const char *name); + +/* Probe for NVRAM header */ +void __init early_nvram_init(void) +{ + struct nvram_header *header; + int i; + u32 base, lim, off; + u32 *src, *dst; + + base = WINDOW_ADDR; + lim = WINDOW_SIZE; + cfe_env = 0; + + + /* XXX: hack for supporting the CFE environment stuff on WGT634U */ + if (lim >= 8 MB) { + src = (u32 *) KSEG1ADDR(base + 8 MB - 0x20000); + dst = (u32 *) nvram_buf; + + /* We are looking for the String gOGoBrCm */ + if ((*src) == 0x674f476f && (*(src + 1)) == 0x4272436d) { + printk("early_nvram_init: EasyGate NVRAM found.\n"); + + for (i = 0; i < 0x1ff0; i++) { + if (*src == 0xFFFFFFFF) + break; + *dst++ = *src++; + } + cfe_env = 1; + return; + } + } + + off = 0x20000; + while (off <= lim) { + /* Windowed flash access */ + header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); + if (header->magic == NVRAM_HEADER) + goto found; + off <<= 1; + } + + /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ + header = (struct nvram_header *) KSEG1ADDR(base + 4096); + if (header->magic == NVRAM_HEADER) + goto found; + + header = (struct nvram_header *) KSEG1ADDR(base + 1024); + if (header->magic == NVRAM_HEADER) + goto found; + + printk("Found no CFE environnment\n"); + return; + +found: + printk("Found CFE environnment\n"); + src = (u32 *) header; + dst = (u32 *) nvram_buf; + for (i = 0; i < sizeof(struct nvram_header); i += 4) + *dst++ = *src++; + for (; i < header->len && i < NVRAM_SPACE; i += 4) + //*dst++ = le32_to_cpu(*src++); + *dst++ = be32_to_cpu(*src++); +} + +char *nvram_get(const char *name) +{ + char *var, *value, *end, *eq; + + if (!name) + return NULL; + + if (!nvram_buf[0]) + early_nvram_init(); + + if (cfe_env) + return cfe_env_get(nvram_buf, name); + + /* Look for name=value and return value */ + var = &nvram_buf[sizeof(struct nvram_header)]; + end = nvram_buf + sizeof(nvram_buf) - 2; + end[0] = end[1] = '\0'; + for (; *var; var = value + strlen(value) + 1) { + if (!(eq = strchr(var, '='))) + break; + value = eq + 1; + if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) + return value; + } + + return NULL; +} + +EXPORT_SYMBOL(nvram_get); diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/prom.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/prom.c new file mode 100644 index 0000000000..23e97200b0 --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/prom.c @@ -0,0 +1,74 @@ +/* + Copyright 2004 Broadcom Corp. All Rights Reserved. + Copyright 2007 OpenWrt,org, Florian Fainelli + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +*/ +/* + * prom.c: PROM library initialization code. + * + */ +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "../cfe/cfe_private.h" + +extern void __init detect_bootloader(void); +extern void serial_init(void); +extern int boot_loader_type; + +#define MACH_BCM MACH_BCM96348 + +const char *get_system_type(void) +{ + return "Broadcom BCM963xx"; +} + +void __init prom_init(void) +{ + serial_init(); + + printk("%s prom init\n", get_system_type() ); + + PERF->IrqMask = 0; + + /* Detect the bootloader */ + detect_bootloader(); + + /* Do further initialisations depending on the bootloader */ + if (boot_loader_type == BOOT_LOADER_CFE || boot_loader_type == BOOT_LOADER_CFE2) { + cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3); + } + /* Register 16MB RAM minus the ADSL SDRAM by default */ + add_memory_region(0, (0x01000000 - ADSL_SDRAM_IMAGE_SIZE), BOOT_MEM_RAM); + + mips_machgroup = MACH_GROUP_BRCM; + mips_machtype = MACH_BCM; +} + +unsigned long __init prom_free_prom_memory(void) +{ + /* We do not have any memory to free */ + return 0; +} diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/ser_init.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/ser_init.c new file mode 100644 index 0000000000..bb745aec6e --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/ser_init.c @@ -0,0 +1,181 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Broadcom bcm63xx serial port initialization, also prepare for printk + * by registering with console_init + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include <6348_map_part.h> +#include + +#define SER63XX_DEFAULT_BAUD 115200 +#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) +#define stUart ((volatile Uart * const) UART_BASE) + +// Transmit interrupts +#define TXINT (TXFIFOEMT | TXUNDERR | TXOVFERR) +// Receive interrupts +#define RXINT (RXFIFONE | RXOVFERR) + +/* -------------------------------------------------------------------------- + Name: serial_init + Purpose: Initalize the UART +-------------------------------------------------------------------------- */ +void __init serial_init(void) +{ + u32 tmpVal = SER63XX_DEFAULT_BAUD; + ULONG clockFreqHz; + +#if defined(CONFIG_BCM96345) + // Make sure clock is ticking + PERF->blkEnables |= UART_CLK_EN; +#endif + + /* Dissable channel's receiver and transmitter. */ + stUart->control &= ~(BRGEN|TXEN|RXEN); + + /*--------------------------------------------------------------------*/ + /* Write the table value to the clock select register. */ + /* DPullen - this is the equation to use: */ + /* value = clockFreqHz / baud / 32-1; */ + /* (snmod) Actually you should also take into account any necessary */ + /* rounding. Divide by 16, look at lsb, if 0, divide by 2 */ + /* and subtract 1. If 1, just divide by 2 */ + /*--------------------------------------------------------------------*/ + clockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; + tmpVal = (clockFreqHz / tmpVal) / 16; + if( tmpVal & 0x01 ) + tmpVal /= 2; //Rounding up, so sub is already accounted for + else + tmpVal = (tmpVal / 2) - 1; // Rounding down so we must sub 1 + stUart->baudword = tmpVal; + + /* Finally, re-enable the transmitter and receiver. */ + stUart->control |= (BRGEN|TXEN|RXEN); + + stUart->config = (BITS8SYM | ONESTOP); + // Set the FIFO interrupt depth ... stUart->fifocfg = 0xAA; + stUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; + stUart->intMask = 0; + stUart->intMask = RXINT | TXINT; +} + + +/* prom_putc() + * Output a character to the UART + */ +void prom_putc(char c) +{ + /* Wait for Tx uffer to empty */ + while (! (READ16(stUart->intStatus) & TXFIFOEMT)); + /* Send character */ + stUart->Data = c; +} + +/* prom_puts() + * Write a string to the UART + */ +void prom_puts(const char *s) +{ + while (*s) { + if (*s == '\n') { + prom_putc('\r'); + } + prom_putc(*s++); + } +} + + +/* prom_getc_nowait() + * Returns a character from the UART + * Returns -1 if no characters available or corrupted + */ +int prom_getc_nowait(void) +{ + uint16 uStatus; + int cData = -1; + + uStatus = READ16(stUart->intStatus); + + if (uStatus & RXFIFONE) { /* Do we have a character? */ + cData = READ16(stUart->Data) & 0xff; /* Read character */ + if (uStatus & (RXFRAMERR | RXPARERR)) { /* If we got an error, throw it away */ + cData = -1; + } + } + + return cData; +} + +/* prom_getc() + * Returns a charcter from the serial port + * Will block until it receives a valid character +*/ +char prom_getc(void) +{ + int cData = -1; + + /* Loop until we get a valid character */ + while(cData == -1) { + cData = prom_getc_nowait(); + } + return (char) cData; +} + +/* prom_testc() + * Returns 0 if no characters available + */ +int prom_testc(void) +{ + uint16 uStatus; + + uStatus = READ16(stUart->intStatus); + + return (uStatus & RXFIFONE); +} + +#if defined (CONFIG_REMOTE_DEBUG) +/* Prevent other code from writing to the serial port */ +void _putc(char c) { } +void _puts(const char *ptr) { } +#else +/* Low level outputs call prom routines */ +void _putc(char c) { + prom_putc(c); +} +void _puts(const char *ptr) { + prom_puts(ptr); +} +#endif diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/setup.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/setup.c new file mode 100644 index 0000000000..8f4b55302c --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/setup.c @@ -0,0 +1,471 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Generic setup routines for Broadcom 963xx MIPS boards + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void brcm_time_init(void); +extern int boot_loader_type; + +#include +#include +#include +#include <6348_map_part.h> +#include + +static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); + +/* This function should be in a board specific directory. For now, + * assume that all boards that include this file use a Broadcom chip + * with a soft reset bit in the PLL control register. + */ +static void brcm_machine_restart(char *command) +{ + const unsigned long ulSoftReset = 0x00000001; + unsigned long *pulPllCtrl = (unsigned long *) 0xfffe0008; + *pulPllCtrl |= ulSoftReset; +} + +static void brcm_machine_halt(void) +{ + printk("System halted\n"); + while (1); +} + +static void mpi_SetLocalPciConfigReg(uint32 reg, uint32 value) +{ + /* write index then value */ + mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; + mpi->pcicfgdata = value; +} + +static uint32 mpi_GetLocalPciConfigReg(uint32 reg) +{ + /* write index then get value */ + mpi->pcicfgcntrl = PCI_CFG_REG_WRITE_EN + reg;; + return mpi->pcicfgdata; +} + +/* + * mpi_ResetPcCard: Set/Reset the PcCard + */ +static void mpi_ResetPcCard(int cardtype, BOOL bReset) +{ + if (cardtype == MPI_CARDTYPE_NONE) { + return; + } + + if (cardtype == MPI_CARDTYPE_CARDBUS) { + bReset = ! bReset; + } + + if (bReset) { + mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); + } else { + mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 | PCCARD_CARD_RESET); + } +} + +/* + * mpi_ConfigCs: Configure an MPI/EBI chip select + */ +static void mpi_ConfigCs(uint32 cs, uint32 base, uint32 size, uint32 flags) +{ + mpi->cs[cs].base = ((base & 0x1FFFFFFF) | size); + mpi->cs[cs].config = flags; +} + +/* + * mpi_InitPcmciaSpace + */ +static void mpi_InitPcmciaSpace(void) +{ + // ChipSelect 4 controls PCMCIA Memory accesses + mpi_ConfigCs(PCMCIA_COMMON_BASE, pcmciaMem, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); + // ChipSelect 5 controls PCMCIA Attribute accesses + mpi_ConfigCs(PCMCIA_ATTRIBUTE_BASE, pcmciaAttr, EBI_SIZE_1M, (EBI_WORD_WIDE|EBI_ENABLE)); + // ChipSelect 6 controls PCMCIA I/O accesses + mpi_ConfigCs(PCMCIA_IO_BASE, pcmciaIo, EBI_SIZE_64K, (EBI_WORD_WIDE|EBI_ENABLE)); + + mpi->pcmcia_cntl2 = ((PCMCIA_ATTR_ACTIVE << RW_ACTIVE_CNT_BIT) | + (PCMCIA_ATTR_INACTIVE << INACTIVE_CNT_BIT) | + (PCMCIA_ATTR_CE_SETUP << CE_SETUP_CNT_BIT) | + (PCMCIA_ATTR_CE_HOLD << CE_HOLD_CNT_BIT)); + + mpi->pcmcia_cntl2 |= (PCMCIA_HALFWORD_EN | PCMCIA_BYTESWAP_DIS); +} + +/* + * cardtype_vcc_detect: PC Card's card detect and voltage sense connection + * + * CD1#/ CD2#/ VS1#/ VS2#/ Card Initial Vcc + * CCD1# CCD2# CVS1 CVS2 Type + * + * GND GND open open 16-bit 5 vdc + * + * GND GND GND open 16-bit 3.3 vdc + * + * GND GND open GND 16-bit x.x vdc + * + * GND GND GND GND 16-bit 3.3 & x.x vdc + * + *==================================================================== + * + * CVS1 GND CCD1# open CardBus 3.3 vdc + * + * GND CVS2 open CCD2# CardBus x.x vdc + * + * GND CVS1 CCD2# open CardBus y.y vdc + * + * GND CVS2 GND CCD2# CardBus 3.3 & x.x vdc + * + * CVS2 GND open CCD1# CardBus x.x & y.y vdc + * + * GND CVS1 CCD2# open CardBus 3.3, x.x & y.y vdc + * + */ +static int cardtype_vcc_detect(void) +{ + uint32 data32; + int cardtype; + + cardtype = MPI_CARDTYPE_NONE; + mpi->pcmcia_cntl1 = 0x0000A000; // Turn on the output enables and drive + // the CVS pins to 0. + data32 = mpi->pcmcia_cntl1; + switch (data32 & 0x00000003) // Test CD1# and CD2#, see if card is plugged in. + { + case 0x00000003: // No Card is in the slot. + printk("mpi: No Card is in the PCMCIA slot\n"); + break; + + case 0x00000002: // Partial insertion, No CD2#. + printk("mpi: Card in the PCMCIA slot partial insertion, no CD2 signal\n"); + break; + + case 0x00000001: // Partial insertion, No CD1#. + printk("mpi: Card in the PCMCIA slot partial insertion, no CD1 signal\n"); + break; + + case 0x00000000: + mpi->pcmcia_cntl1 = 0x0000A0C0; // Turn off the CVS output enables and + // float the CVS pins. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + // Read the Register. + switch (data32 & 0x0000000C) // See what is on the CVS pins. + { + case 0x00000000: // CVS1 and CVS2 are tied to ground, only 1 option. + printk("mpi: Detected 3.3 & x.x 16-bit PCMCIA card\n"); + cardtype = MPI_CARDTYPE_PCMCIA; + break; + + case 0x00000004: // CVS1 is open or tied to CCD1/CCD2 and CVS2 is tied to ground. + // 2 valid voltage options. + switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. + { + case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. + mpi->pcmcia_cntl1 = 0x0000A080; // Drive CVS1 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000002) { // CCD2 is tied to CVS2, not valid. + printk("mpi: Unknown card plugged into slot\n"); + } else { // CCD2 is tied to CVS1. + printk("mpi: Detected 3.3, x.x and y.y Cardbus card\n"); + cardtype = MPI_CARDTYPE_CARDBUS; + } + break; + + case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000000: // CCD1 and CCD2 are tied to ground. + printk("mpi: Detected x.x vdc 16-bit PCMCIA card\n"); + cardtype = MPI_CARDTYPE_PCMCIA; + break; + } + break; + + case 0x00000008: // CVS2 is open or tied to CCD1/CCD2 and CVS1 is tied to ground. + // 2 valid voltage options. + switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. + { + case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. + mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000002) { // CCD2 is tied to CVS1, not valid. + printk("mpi: Unknown card plugged into slot\n"); + } else {// CCD2 is tied to CVS2. + printk("mpi: Detected 3.3 and x.x Cardbus card\n"); + cardtype = MPI_CARDTYPE_CARDBUS; + } + break; + + case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000000: // CCD1 and CCD2 are tied to ground. + cardtype = MPI_CARDTYPE_PCMCIA; + printk("mpi: Detected 3.3 vdc 16-bit PCMCIA card\n"); + break; + } + break; + + case 0x0000000C: // CVS1 and CVS2 are open or tied to CCD1/CCD2. + // 5 valid voltage options. + + switch (data32 & 0x00000003) // Test the values of CCD1 and CCD2. + { + case 0x00000003: // CCD1 and CCD2 are tied to 1 of the CVS pins. + // This is not a valid combination. + printk("mpi: Unknown card plugged into slot\n"); + break; + + case 0x00000002: // CCD2 is tied to either CVS1 or CVS2. + // CCD1 is tied to ground. + mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000002) { // CCD2 is tied to CVS1. + printk("mpi: Detected y.y vdc Cardbus card\n"); + } else { // CCD2 is tied to CVS2. + printk("mpi: Detected x.x vdc Cardbus card\n"); + } + cardtype = MPI_CARDTYPE_CARDBUS; + break; + + case 0x00000001: // CCD1 is tied to either CVS1 or CVS2. + // CCD2 is tied to ground. + + mpi->pcmcia_cntl1 = 0x0000A040; // Drive CVS2 to a 0. + mdelay(1); + data32 = mpi->pcmcia_cntl1; + if (data32 & 0x00000001) {// CCD1 is tied to CVS1. + printk("mpi: Detected 3.3 vdc Cardbus card\n"); + } else { // CCD1 is tied to CVS2. + printk("mpi: Detected x.x and y.y Cardbus card\n"); + } + cardtype = MPI_CARDTYPE_CARDBUS; + break; + + case 0x00000000: // CCD1 and CCD2 are tied to ground. + cardtype = MPI_CARDTYPE_PCMCIA; + printk("mpi: Detected 5 vdc 16-bit PCMCIA card\n"); + break; + } + break; + + default: + printk("mpi: Unknown card plugged into slot\n"); + break; + + } + } + return cardtype; +} + +/* + * mpi_DetectPcCard: Detect the plugged in PC-Card + * Return: < 0 => Unknown card detected + * 0 => No card detected + * 1 => 16-bit card detected + * 2 => 32-bit CardBus card detected + */ +static int mpi_DetectPcCard(void) +{ + int cardtype; + + cardtype = cardtype_vcc_detect(); + switch(cardtype) { + case MPI_CARDTYPE_PCMCIA: + mpi->pcmcia_cntl1 &= ~0x0000e000; // disable enable bits + //mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & ~PCCARD_CARD_RESET); + mpi->pcmcia_cntl1 |= (PCMCIA_ENABLE | PCMCIA_GPIO_ENABLE); + mpi_InitPcmciaSpace(); + mpi_ResetPcCard(cardtype, FALSE); + // Hold card in reset for 10ms + mdelay(10); + mpi_ResetPcCard(cardtype, TRUE); + // Let card come out of reset + mdelay(100); + break; + case MPI_CARDTYPE_CARDBUS: + // 8 => CardBus Enable + // 1 => PCI Slot Number + // C => Float VS1 & VS2 + mpi->pcmcia_cntl1 = (mpi->pcmcia_cntl1 & 0xFFFF0000) | + CARDBUS_ENABLE | + (CARDBUS_SLOT << 8)| + VS2_OEN | + VS1_OEN; + /* access to this memory window will be to/from CardBus */ + mpi->l2pmremap1 |= CARDBUS_MEM; + + // Need to reset the Cardbus Card. There's no CardManager to do this, + // and we need to be ready for PCI configuration. + mpi_ResetPcCard(cardtype, FALSE); + // Hold card in reset for 10ms + mdelay(10); + mpi_ResetPcCard(cardtype, TRUE); + // Let card come out of reset + mdelay(100); + break; + default: + break; + } + return cardtype; +} + +static int mpi_init(void) +{ + unsigned long data; + unsigned int chipid, chiprev, sdramsize; + + printk("Broadcom BCM963xx MPI\n"); + chipid = (PERF->RevID & 0xFFFF0000) >> 16; + chiprev = (PERF->RevID & 0xFF); + + if (boot_loader_type == BOOT_LOADER_CFE) + sdramsize = boot_mem_map.map[0].size; + else + sdramsize = 0x01000000; + /* + * Init the pci interface + */ + data = GPIO->GPIOMode; // GPIO mode register + data |= GROUP2_PCI | GROUP1_MII_PCCARD; // PCI internal arbiter + Cardbus + GPIO->GPIOMode = data; // PCI internal arbiter + + /* + * In the BCM6348 CardBus support is defaulted to Slot 0 + * because there is no external IDSEL for CardBus. To disable + * the CardBus and allow a standard PCI card in Slot 0 + * set the cbus_idsel field to 0x1f. + */ + /* + uData = mpi->pcmcia_cntl1; + uData |= CARDBUS_IDSEL; + mpi->pcmcia_cntl1 = uData; + */ + // Setup PCI I/O Window range. Give 64K to PCI I/O + mpi->l2piorange = ~(BCM_PCI_IO_SIZE_64KB-1); + // UBUS to PCI I/O base address + mpi->l2piobase = BCM_PCI_IO_BASE & BCM_PCI_ADDR_MASK; + // UBUS to PCI I/O Window remap + mpi->l2pioremap = (BCM_PCI_IO_BASE | MEM_WINDOW_EN); + + // enable PCI related GPIO pins and data swap between system and PCI bus + mpi->locbuscntrl = (EN_PCI_GPIO | DIR_U2P_NOSWAP); + + /* Enable 6348 BusMaster and Memory access mode */ + data = mpi_GetLocalPciConfigReg(PCI_COMMAND); + data |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + mpi_SetLocalPciConfigReg(PCI_COMMAND, data); + + /* Configure two 16 MByte PCI to System memory regions. */ + /* These memory regions are used when PCI device is a bus master */ + /* Accesses to the SDRAM from PCI bus will be "byte swapped" for this region */ + mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_3, BCM_HOST_MEM_SPACE1); + mpi->sp0remap = 0x0; + + /* Accesses to the SDRAM from PCI bus will not be "byte swapped" for this region */ + mpi_SetLocalPciConfigReg(PCI_BASE_ADDRESS_4, BCM_HOST_MEM_SPACE2); + mpi->sp1remap = 0x0; + mpi->pcimodesel |= (PCI_BAR2_NOSWAP | 0x40); + + if ((chipid == 0x6348) && (chiprev == 0xb0)) { + mpi->sp0range = ~(sdramsize-1); + mpi->sp1range = ~(sdramsize-1); + } + /* + * Change 6348 PCI Cfg Reg. offset 0x40 to PCI memory read retry count infinity + * by set 0 in bit 8~15. This resolve read Bcm4306 srom return 0xffff in + * first read. + */ + data = mpi_GetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER); + data &= ~BRCM_PCI_CONFIG_TIMER_RETRY_MASK; + data |= 0x00000080; + mpi_SetLocalPciConfigReg(BRCM_PCI_CONFIG_TIMER, data); + + /* enable pci interrupt */ + mpi->locintstat |= (EXT_PCI_INT << 16); + + mpi_DetectPcCard(); + + ioport_resource.start = BCM_PCI_IO_BASE; + ioport_resource.end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB; + +#if defined(CONFIG_USB) + PERF->blkEnables |= USBH_CLK_EN; + mdelay(100); + *USBH_NON_OHCI = NON_OHCI_BYTE_SWAP; +#endif + + return 0; +} + +void __init plat_mem_setup(void) +{ + _machine_restart = brcm_machine_restart; + _machine_halt = brcm_machine_halt; + pm_power_off = brcm_machine_halt; + + board_time_init = brcm_time_init; + + mpi_init(); +} diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/time.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/time.c new file mode 100644 index 0000000000..8b82ada371 --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/time.c @@ -0,0 +1,116 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/* + * Setup time for Broadcom 963xx MIPS boards + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include <6348_map_part.h> +#include <6348_intr.h> +#include +#include + +static unsigned long r4k_offset; /* Amount to increment compare reg each time */ +static unsigned long r4k_cur; /* What counter should be at next timer irq */ + +/* ********************************************************************* + * calculateCpuSpeed() + * Calculate the BCM6348 CPU speed by reading the PLL strap register + * and applying the following formula: + * cpu_clk = (.25 * 64MHz freq) * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) + * Input parameters: + * none + * Return value: + * none + ********************************************************************* */ + +static inline unsigned long __init calculateCpuSpeed(void) +{ + u32 pllStrap = PERF->PllStrap; + int n1 = (pllStrap & PLL_N1_MASK) >> PLL_N1_SHFT; + int n2 = (pllStrap & PLL_N2_MASK) >> PLL_N2_SHFT; + int m1cpu = (pllStrap & PLL_M1_CPU_MASK) >> PLL_M1_CPU_SHFT; + + return (16 * (n1 + 1) * (n2 + 2) / (m1cpu + 1)) * 1000000; +} + + +static inline unsigned long __init cal_r4koff(void) +{ + mips_hpt_frequency = calculateCpuSpeed() / 2; + return (mips_hpt_frequency / HZ); +} + + +/* + * There are a lot of conceptually broken versions of the MIPS timer interrupt + * handler floating around. This one is rather different, but the algorithm + * is provably more robust. + */ +irqreturn_t brcm_timer_interrupt(struct pt_regs *regs) +{ + int irq = MIPS_TIMER_INT; + + irq_enter(); + kstat_this_cpu.irqs[irq]++; + + timer_interrupt(irq, regs); + irq_exit(); + return IRQ_HANDLED; +} + + +void __init brcm_time_init(void) +{ + unsigned int est_freq, flags; + local_irq_save(flags); + + printk("calculating r4koff... "); + r4k_offset = cal_r4koff(); + printk("%08lx(%d)\n", r4k_offset, (int)r4k_offset); + + est_freq = 2 * r4k_offset * HZ; + est_freq += 5000; /* round */ + est_freq -= est_freq % 10000; + printk("CPU frequency %d.%02d MHz\n", est_freq / 1000000, + (est_freq % 1000000) * 100 / 1000000); + local_irq_restore(flags); +} + + +void __init plat_timer_setup(struct irqaction *irq) +{ + r4k_cur = (read_c0_count() + r4k_offset); + write_c0_compare(r4k_cur); + set_c0_status(IE_IRQ5); +} diff --git a/target/linux/easygate-2.6/files/arch/mips/bcm963xx/wdt.c b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/wdt.c new file mode 100644 index 0000000000..42237a7f00 --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/bcm963xx/wdt.c @@ -0,0 +1,242 @@ +/* + * Watchdog driver for the BCM963xx devices + * + * Copyright (C) 2007 OpenWrt.org + * Florian Fainelli + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +typedef struct bcm963xx_timer { + unsigned short unused0; + unsigned char timer_mask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + unsigned char timer_ints; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + unsigned long timer_ctl0; + unsigned long timer_ctl1; + unsigned long timer_ctl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + unsigned long timer_cnt0; + unsigned long timer_cnt1; + unsigned long timer_cnt2; + unsigned long wdt_def_count; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + unsigned long wdt_ctl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + unsigned long wdt_rst_count; +} bcm963xx_timer; + +static struct bcm963xx_wdt_device { + struct completion stop; + volatile int running; + struct timer_list timer; + volatile int queue; + int default_ticks; + unsigned long inuse; +} bcm963xx_wdt_device; + +static int ticks = 1000; + +#define WDT_BASE 0xfffe0200 +#define WDT ((volatile bcm963xx_timer * const) WDT_BASE) + +#define BCM963XX_INTERVAL (HZ/10+1) + +static void bcm963xx_wdt_trigger(unsigned long unused) +{ + if (bcm963xx_wdt_device.running) + ticks--; + + /* Load the default ticking value into the reset counter register */ + WDT->wdt_rst_count = bcm963xx_wdt_device.default_ticks; + + if (bcm963xx_wdt_device.queue && ticks) { + bcm963xx_wdt_device.timer.expires = jiffies + BCM963XX_INTERVAL; + add_timer(&bcm963xx_wdt_device.timer); + } + else { + complete(&bcm963xx_wdt_device.stop); + } +} + +static void bcm963xx_wdt_reset(void) +{ + ticks = bcm963xx_wdt_device.default_ticks; +} + +static void bcm963xx_wdt_start(void) +{ + if (!bcm963xx_wdt_device.queue) { + bcm963xx_wdt_device.queue; + /* Enable the watchdog by writing 0xff00 ,then 0x00ff to the control register */ + WDT->wdt_ctl = 0xff00; + WDT->wdt_ctl = 0x00ff; + bcm963xx_wdt_device.timer.expires = jiffies + BCM963XX_INTERVAL; + add_timer(&bcm963xx_wdt_device.timer); + } + bcm963xx_wdt_device.running++; +} + +static int bcm963xx_wdt_stop(void) +{ + if (bcm963xx_wdt_device.running) + bcm963xx_wdt_device.running = 0; + + ticks = bcm963xx_wdt_device.default_ticks; + + /* Stop the watchdog by writing 0xee00 then 0x00ee to the control register */ + WDT->wdt_ctl = 0xee00; + WDT->wdt_ctl = 0x00ee; + + return -EIO; +} + +static int bcm963xx_wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &bcm963xx_wdt_device.inuse)) + return -EBUSY; + return nonseekable_open(inode, file); +} + +static int bcm963xx_wdt_release(struct inode *inode, struct file *file) +{ + clear_bit(0, &bcm963xx_wdt_device.inuse); + return 0; +} + +static int bcm963xx_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + void __user *argp = (void __user *)arg; + unsigned int value; + + static struct watchdog_info ident = { + .options = WDIOF_CARDRESET, + .identity = "BCM963xx WDT", + }; + + switch (cmd) { + case WDIOC_KEEPALIVE: + bcm963xx_wdt_reset(); + break; + case WDIOC_GETSTATUS: + /* Reading from the control register will return the current value */ + value = WDT->wdt_ctl; + if ( copy_to_user(argp, &value, sizeof(int)) ) + return -EFAULT; + break; + case WDIOC_GETSUPPORT: + if ( copy_to_user(argp, &ident, sizeof(ident)) ) + return -EFAULT; + break; + case WDIOC_SETOPTIONS: + if ( copy_from_user(&value, argp, sizeof(int)) ) + return -EFAULT; + switch(value) { + case WDIOS_ENABLECARD: + bcm963xx_wdt_start(); + break; + case WDIOS_DISABLECARD: + bcm963xx_wdt_stop(); + break; + default: + return -EINVAL; + } + break; + default: + return -ENOTTY; + } + return 0; +} + +static int bcm963xx_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +{ + if (!count) + return -EIO; + bcm963xx_wdt_reset(); + return count; +} + +static const struct file_operations bcm963xx_wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = bcm963xx_wdt_write, + .ioctl = bcm963xx_wdt_ioctl, + .open = bcm963xx_wdt_open, + .release = bcm963xx_wdt_release, +}; + +static struct miscdevice bcm963xx_wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &bcm963xx_wdt_fops, +}; + +static void __exit bcm963xx_wdt_exit(void) +{ + if (bcm963xx_wdt_device.queue ){ + bcm963xx_wdt_device.queue = 0; + wait_for_completion(&bcm963xx_wdt_device.stop); + } + misc_deregister(&bcm963xx_wdt_miscdev); +} + +static int __init bcm963xx_wdt_init(void) +{ + int ret = 0; + + printk("Broadcom BCM963xx Watchdog timer\n"); + + ret = misc_register(&bcm963xx_wdt_miscdev); + if (ret) { + printk(KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n", WATCHDOG_MINOR, ret); + return ret; + } + init_completion(&bcm963xx_wdt_device.stop); + bcm963xx_wdt_device.queue = 0; + + clear_bit(0, &bcm963xx_wdt_device.inuse); + + init_timer(&bcm963xx_wdt_device.timer); + bcm963xx_wdt_device.timer.function = bcm963xx_wdt_trigger; + bcm963xx_wdt_device.timer.data = 0; + + bcm963xx_wdt_device.default_ticks = ticks; + return ret; +} + + +module_init(bcm963xx_wdt_init); +module_exit(bcm963xx_wdt_exit); + +MODULE_AUTHOR("Florian Fainelli "); +MODULE_DESCRIPTION("Broadcom BCM963xx Watchdog driver"); +MODULE_LICENSE("GPL"); diff --git a/target/linux/easygate-2.6/files/arch/mips/cfe/Makefile b/target/linux/easygate-2.6/files/arch/mips/cfe/Makefile new file mode 100644 index 0000000000..d9f046adf3 --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/cfe/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Broadcom Common Firmware Environment support +# + +obj-y += cfe.o diff --git a/target/linux/easygate-2.6/files/arch/mips/cfe/cfe.c b/target/linux/easygate-2.6/files/arch/mips/cfe/cfe.c new file mode 100644 index 0000000000..6d16111e1c --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/cfe/cfe.c @@ -0,0 +1,533 @@ +/* + * Broadcom Common Firmware Environment (CFE) support + * + * Copyright 2000, 2001, 2002 + * Broadcom Corporation. All rights reserved. + * + * Copyright (C) 2006 Michael Buesch + * + * Original Authors: Mitch Lichtenberg, Chris Demetriou + * + * This software is furnished under license and may be used and copied only + * in accordance with the following terms and conditions. Subject to these + * conditions, you may download, copy, install, use, modify and distribute + * modified or unmodified copies of this software in source and/or binary + * form. No title or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce and + * retain this copyright notice and list of conditions as they appear in + * the source file. + * + * 2) No right is granted to use any trade name, trademark, or logo of + * Broadcom Corporation. The "Broadcom Corporation" name may not be + * used to endorse or promote products derived from this software + * without the prior written permission of Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE + * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE + * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include +#include +#include + +#include "cfe_private.h" + + +static cfe_uint_t cfe_handle; +static int (*cfe_trampoline)(long handle, long iocb); + + +#include + +void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1, + unsigned long fwarg2, unsigned long fwarg3) +{ + if (fwarg3 == 0x80300000) { + /* WRT54G workaround */ + fwarg3 = CFE_EPTSEAL; + fwarg2 = 0xBFC00500; + } + if (fwarg3 != CFE_EPTSEAL) { + /* We are not booted from CFE */ + return; + } + if (fwarg1 == 0) { + /* We are on the boot CPU */ + cfe_handle = (cfe_uint_t)fwarg0; + cfe_trampoline = CFE_TO_PTR(fwarg2); + } +} + +int cfe_vprintk(const char *fmt, va_list args) +{ + static char buffer[1024]; + static DEFINE_SPINLOCK(lock); + static const char pfx[] = "CFE-console: "; + static const size_t pfx_len = sizeof(pfx) - 1; + unsigned long flags; + int len, cnt, pos; + int handle; + int res; + + if (!cfe_present()) + return -ENODEV; + + spin_lock_irqsave(&lock, flags); + handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); + if (CFE_ISERR(handle)) { + len = -EIO; + goto out; + } + strcpy(buffer, pfx); + len = vscnprintf(buffer + pfx_len, + sizeof(buffer) - pfx_len - 2, + fmt, args); + len += pfx_len; + /* The CFE console requires CR-LF line-ends. + * Add a CR, if we only terminate lines with a LF. + * This does only fix CR-LF at the end of the string. + * So for multiple lines, use multiple cfe_vprintk calls. + */ + if (len > 1 && + buffer[len - 1] == '\n' && buffer[len - 2] != '\r') { + buffer[len - 1] = '\r'; + buffer[len] = '\n'; + len += 1; + } + cnt = len; + pos = 0; + while (cnt > 0) { + res = cfe_write(handle, buffer + pos, len - pos); + if (CFE_ISERR(res)) { + len = -EIO; + goto out; + } + cnt -= res; + pos += res; + } +out: + spin_unlock_irqrestore(&lock, flags); + + return len; +} + +int cfe_printk(const char *fmt, ...) +{ + va_list args; + int res; + + va_start(args, fmt); + res = cfe_vprintk(fmt, args); + va_end(args); + + return res; +} + +static int cfe_iocb_dispatch(struct cfe_iocb *iocb) +{ + if (!cfe_present()) + return CFE_ERR_UNSUPPORTED; + return cfe_trampoline((long)cfe_handle, (long)iocb); +} + +int cfe_present(void) +{ + return (cfe_trampoline != NULL); +} + +int cfe_close(int handle) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_CLOSE; + iocb.handle = handle; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_CPUCTL; + iocb.psize = sizeof(struct cfe_iocb_cpuctl); + iocb.cpuctl.number = cpu; + iocb.cpuctl.command = CFE_CPU_CMD_START; + iocb.cpuctl.gp = gp; + iocb.cpuctl.sp = sp; + iocb.cpuctl.a1 = a1; + iocb.cpuctl.start_addr = (long)fn; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_cpu_stop(int cpu) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_CPUCTL; + iocb.psize = sizeof(struct cfe_iocb_cpuctl); + iocb.cpuctl.number = cpu; + iocb.cpuctl.command = CFE_CPU_CMD_STOP; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_ENV_ENUM; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.index = idx; + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = namelen; + iocb.envbuf.val = PTR_TO_CFE(val); + iocb.envbuf.val_len = vallen; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_enumdev(int idx, char *name, int namelen) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + + iocb.fcode = CFE_CMD_DEV_ENUM; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.index = idx; + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = namelen; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_enummem(int idx, int flags, u64 *start, u64 *length, + u64 *type) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + + iocb.fcode = CFE_CMD_FW_MEMENUM; + iocb.flags = flags; + iocb.psize = sizeof(struct cfe_iocb_meminfo); + iocb.meminfo.index = idx; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (!CFE_ISERR(iocb.status)) { + *start = iocb.meminfo.addr; + *length = iocb.meminfo.size; + *type = iocb.meminfo.type; + } + + return iocb.status; +} + +int cfe_exit(int warm, int status) +{ + struct cfe_iocb iocb; + int err; + +printk("CFE REBOOT\n"); + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_RESTART; + if (warm) + iocb.flags = CFE_FLG_WARMSTART; + iocb.psize = sizeof(struct cfe_iocb_exitstat); + iocb.exitstat.status = status; + +printk("CALL\n"); + err = cfe_iocb_dispatch(&iocb); +printk("DONE\n"); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_flushcache(int flags) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_FLUSHCACHE; + iocb.flags = flags; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_getdevinfo(char *name) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_GETINFO; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.ptr = PTR_TO_CFE(name); + iocb.buffer.length = strlen(name); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.buffer.devflags; +} + +int cfe_getenv(char *name, char *dest, int destlen) +{ + struct cfe_iocb iocb; + int err; + + dest[0] = '\0'; + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_ENV_GET; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = strlen(name); + iocb.envbuf.val = PTR_TO_CFE(dest); + iocb.envbuf.val_len = destlen; + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_getfwinfo(struct cfe_fwinfo *info) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_GETINFO; + iocb.psize = sizeof(struct cfe_iocb_fwinfo); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return err; + + info->version = iocb.fwinfo.version; + info->totalmem = iocb.fwinfo.totalmem; + info->flags = iocb.fwinfo.flags; + info->boardid = iocb.fwinfo.boardid; + info->bootarea_va = iocb.fwinfo.bootarea_va; + info->bootarea_pa = iocb.fwinfo.bootarea_pa; + info->bootarea_size = iocb.fwinfo.bootarea_size; + + return iocb.status; +} + +int cfe_getstdhandle(int handletype) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_GETHANDLE; + iocb.flags = handletype; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.handle; +} + +int cfe_getticks(s64 *ticks) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_FW_GETTIME; + iocb.psize = sizeof(struct cfe_iocb_time); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (!CFE_ISERR(iocb.status)) + *ticks = iocb.time.ticks; + + return iocb.status; +} + +int cfe_inpstat(int handle) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_INPSTAT; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_inpstat); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.inpstat.status; +} + +int cfe_ioctl(int handle, unsigned int ioctlnum, + unsigned char *buffer, int length, + int *retlen, u64 offset) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_IOCTL; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.offset = offset; + iocb.buffer.ioctlcmd = ioctlnum; + iocb.buffer.ptr = PTR_TO_CFE(buffer); + iocb.buffer.length = length; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + if (retlen) + *retlen = iocb.buffer.retlen; + + return iocb.status; +} + +int cfe_open(char *name) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_OPEN; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.ptr = PTR_TO_CFE(name); + iocb.buffer.length = strlen(name); + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.handle; +} + +int cfe_read(int handle, unsigned char *buffer, int length) +{ + return cfe_readblk(handle, 0, buffer, length); +} + +int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_READ; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.offset = offset; + iocb.buffer.ptr = PTR_TO_CFE(buffer); + iocb.buffer.length = length; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.buffer.retlen; +} + +int cfe_setenv(char *name, char *val) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_ENV_SET; + iocb.psize = sizeof(struct cfe_iocb_envbuf); + iocb.envbuf.name = PTR_TO_CFE(name); + iocb.envbuf.name_len = strlen(name); + iocb.envbuf.val = PTR_TO_CFE(val); + iocb.envbuf.val_len = strlen(val); + + err = cfe_iocb_dispatch(&iocb); + + return (CFE_ISERR(err)) ? err : iocb.status; +} + +int cfe_write(int handle, unsigned char *buffer, int length) +{ + return cfe_writeblk(handle, 0, buffer, length); +} + +int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length) +{ + struct cfe_iocb iocb; + int err; + + memset(&iocb, 0, sizeof(iocb)); + iocb.fcode = CFE_CMD_DEV_WRITE; + iocb.handle = handle; + iocb.psize = sizeof(struct cfe_iocb_buf); + iocb.buffer.offset = offset; + iocb.buffer.ptr = PTR_TO_CFE(buffer); + iocb.buffer.length = length; + + err = cfe_iocb_dispatch(&iocb); + if (CFE_ISERR(err)) + return err; + if (CFE_ISERR(iocb.status)) + return iocb.status; + + return iocb.buffer.retlen; +} diff --git a/target/linux/easygate-2.6/files/arch/mips/cfe/cfe_private.h b/target/linux/easygate-2.6/files/arch/mips/cfe/cfe_private.h new file mode 100644 index 0000000000..0a604d3bbd --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/cfe/cfe_private.h @@ -0,0 +1,176 @@ +/* + * Broadcom Common Firmware Environment (CFE) support + * + * Copyright 2000, 2001, 2002 + * Broadcom Corporation. All rights reserved. + * + * Copyright (C) 2006 Michael Buesch + * + * Original Authors: Mitch Lichtenberg, Chris Demetriou + * + * This software is furnished under license and may be used and copied only + * in accordance with the following terms and conditions. Subject to these + * conditions, you may download, copy, install, use, modify and distribute + * modified or unmodified copies of this software in source and/or binary + * form. No title or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce and + * retain this copyright notice and list of conditions as they appear in + * the source file. + * + * 2) No right is granted to use any trade name, trademark, or logo of + * Broadcom Corporation. The "Broadcom Corporation" name may not be + * used to endorse or promote products derived from this software + * without the prior written permission of Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE + * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE + * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef LINUX_CFE_PRIVATE_H_ +#define LINUX_CFE_PRIVATE_H_ + +#ifndef __ASSEMBLY__ + +/* Seal indicating CFE's presence, passed to the kernel. */ +#define CFE_EPTSEAL 0x43464531 + +#define CFE_CMD_FW_GETINFO 0 +#define CFE_CMD_FW_RESTART 1 +#define CFE_CMD_FW_BOOT 2 +#define CFE_CMD_FW_CPUCTL 3 +#define CFE_CMD_FW_GETTIME 4 +#define CFE_CMD_FW_MEMENUM 5 +#define CFE_CMD_FW_FLUSHCACHE 6 + +#define CFE_CMD_DEV_GETHANDLE 9 +#define CFE_CMD_DEV_ENUM 10 +#define CFE_CMD_DEV_OPEN 11 +#define CFE_CMD_DEV_INPSTAT 12 +#define CFE_CMD_DEV_READ 13 +#define CFE_CMD_DEV_WRITE 14 +#define CFE_CMD_DEV_IOCTL 15 +#define CFE_CMD_DEV_CLOSE 16 +#define CFE_CMD_DEV_GETINFO 17 + +#define CFE_CMD_ENV_ENUM 20 +#define CFE_CMD_ENV_GET 22 +#define CFE_CMD_ENV_SET 23 +#define CFE_CMD_ENV_DEL 24 + +#define CFE_CMD_MAX 32 + +#define CFE_CMD_VENDOR_USE 0x8000 /* codes above this are for customer use */ + +typedef u64 cfe_uint_t; +typedef s64 cfe_int_t; +typedef s64 cfe_ptr_t; + +/* Cast a pointer from native to CFE-API pointer and back */ +#define CFE_TO_PTR(p) ((void *)(unsigned long)(p)) +#define PTR_TO_CFE(p) ((cfe_ptr_t)(unsigned long)(p)) + +struct cfe_iocb_buf { + cfe_uint_t offset; /* offset on device (bytes) */ + cfe_ptr_t ptr; /* pointer to a buffer */ + cfe_uint_t length; /* length of this buffer */ + cfe_uint_t retlen; /* returned length (for read ops) */ + union { + cfe_uint_t ioctlcmd; /* IOCTL command (used only for IOCTLs) */ + cfe_uint_t devflags; /* Returned device info flags */ + }; +}; + +struct cfe_iocb_inpstat { + cfe_uint_t status; /* 1 means input available */ +}; + +struct cfe_iocb_envbuf { + cfe_int_t index; /* 0-based enumeration index */ + cfe_ptr_t name; /* name string buffer */ + cfe_int_t name_len; /* size of name buffer */ + cfe_ptr_t val; /* value string buffer */ + cfe_int_t val_len; /* size of value string buffer */ +}; + +struct cfe_iocb_cpuctl { + cfe_uint_t number; /* cpu number to control */ + cfe_uint_t command; /* command to issue to CPU */ + cfe_uint_t start_addr; /* CPU start address */ + cfe_uint_t gp; /* starting GP value */ + cfe_uint_t sp; /* starting SP value */ + cfe_uint_t a1; /* starting A1 value */ +}; + +struct cfe_iocb_time { + cfe_int_t ticks; /* current time in ticks */ +}; + +struct cfe_iocb_exitstat { + cfe_int_t status; +}; + +struct cfe_iocb_meminfo { + cfe_int_t index; /* 0-based enumeration index */ + cfe_int_t type; /* type of memory block */ + cfe_uint_t addr; /* physical start address */ + cfe_uint_t size; /* block size */ +}; + +struct cfe_iocb_fwinfo { + cfe_int_t version; /* major, minor, eco version */ + cfe_int_t totalmem; /* total installed mem */ + cfe_int_t flags; /* various flags */ + cfe_int_t boardid; /* board ID */ + cfe_int_t bootarea_va; /* VA of boot area */ + cfe_int_t bootarea_pa; /* PA of boot area */ + cfe_int_t bootarea_size; /* size of boot area */ + cfe_int_t reserved1; + cfe_int_t reserved2; + cfe_int_t reserved3; +}; + +/* CFE I/O Control Block */ +struct cfe_iocb { + cfe_uint_t fcode; /* IOCB function code */ + cfe_int_t status; /* return status */ + cfe_int_t handle; /* file/device handle */ + cfe_uint_t flags; /* flags for this IOCB */ + cfe_uint_t psize; /* size of parameter list */ + union { + struct cfe_iocb_buf buffer; /* buffer parameters */ + struct cfe_iocb_inpstat inpstat; /* input status parameters */ + struct cfe_iocb_envbuf envbuf; /* environment function parameters */ + struct cfe_iocb_cpuctl cpuctl; /* CPU control parameters */ + struct cfe_iocb_time time; /* timer parameters */ + struct cfe_iocb_meminfo meminfo; /* memory arena info parameters */ + struct cfe_iocb_fwinfo fwinfo; /* firmware information */ + struct cfe_iocb_exitstat exitstat; /* Exit Status */ + }; +}; + + +#include + +void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1, + unsigned long fwarg2, unsigned long fwarg3); + +#else /* __ASSEMBLY__ */ + + .macro cfe_early_init +#ifdef CONFIG_CFE + jal cfe_setup +#endif + .endm + +#endif /* __ASSEMBLY__ */ +#endif /* LINUX_CFE_PRIVATE_H_ */ diff --git a/target/linux/easygate-2.6/files/arch/mips/pci/fixup-bcm96348.c b/target/linux/easygate-2.6/files/arch/mips/pci/fixup-bcm96348.c new file mode 100644 index 0000000000..ae71ebc73b --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/pci/fixup-bcm96348.c @@ -0,0 +1,95 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +#include +#include +#include + +#include +#include +#include +#include <6348_intr.h> +#include <6348_map_part.h> + +static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); + +static char irq_tab_bcm96348[] __initdata = { + [0] = INTERRUPT_ID_MPI, + [1] = INTERRUPT_ID_MPI, +#if defined(CONFIG_USB) + [USB_HOST_SLOT] = INTERRUPT_ID_USBH +#endif +}; + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + return irq_tab_bcm96348[slot]; +} + +static void bcm96348_fixup(struct pci_dev *dev) +{ + uint32 memaddr; + uint32 size; + + memaddr = pci_resource_start(dev, 0); + size = pci_resource_len(dev, 0); + + switch (PCI_SLOT(dev->devfn)) { + case 0: + // UBUS to PCI address range + // Memory Window 1. Mask determines which bits are decoded. + mpi->l2pmrange1 = ~(size-1); + // UBUS to PCI Memory base address. This is akin to the ChipSelect base + // register. + mpi->l2pmbase1 = memaddr & BCM_PCI_ADDR_MASK; + // UBUS to PCI Remap Address. Replaces the masked address bits in the + // range register with this setting. + // Also, enable direct I/O and direct Memory accesses + mpi->l2pmremap1 = (memaddr | MEM_WINDOW_EN); + break; + + case 1: + // Memory Window 2 + mpi->l2pmrange2 = ~(size-1); + // UBUS to PCI Memory base address. + mpi->l2pmbase2 = memaddr & BCM_PCI_ADDR_MASK; + // UBUS to PCI Remap Address + mpi->l2pmremap2 = (memaddr | MEM_WINDOW_EN); + break; + +#if defined(CONFIG_USB) + case USB_HOST_SLOT: + dev->resource[0].start = USB_HOST_BASE; + dev->resource[0].end = USB_HOST_BASE+USB_BAR0_MEM_SIZE-1; + break; +#endif + } +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_ANY_ID, + bcm96348_fixup); + +/*struct pci_fixup pcibios_fixups[] = { + { PCI_FIXUP_FINAL, PCI_ANY_ID, PCI_ANY_ID, bcm96348_fixup }, + {0} +};*/ diff --git a/target/linux/easygate-2.6/files/arch/mips/pci/ops-bcm96348.c b/target/linux/easygate-2.6/files/arch/mips/pci/ops-bcm96348.c new file mode 100644 index 0000000000..ee1647121e --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/pci/ops-bcm96348.c @@ -0,0 +1,278 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +#include +#include +#include +#include +#include + +#include +#include +#include <6348_intr.h> +#include <6348_map_part.h> +#include + +#include + +#if defined(CONFIG_USB) +#if 0 +#define DPRINT(x...) printk(x) +#else +#define DPRINT(x...) +#endif + +static int +pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size); +static int +pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size); + +static bool usb_mem_size_rd = FALSE; +static uint32 usb_mem_base = 0; +static uint32 usb_cfg_space_cmd_reg = 0; +#endif +static bool pci_mem_size_rd = FALSE; + +static volatile MpiRegisters * mpi = (MpiRegisters *)(MPI_BASE); + +static void mpi_SetupPciConfigAccess(uint32 addr) +{ + mpi->l2pcfgctl = (DIR_CFG_SEL | DIR_CFG_USEREG | addr) & ~CONFIG_TYPE; +} + +static void mpi_ClearPciConfigAccess(void) +{ + mpi->l2pcfgctl = 0x00000000; +} + +#if defined(CONFIG_USB) +/* -------------------------------------------------------------------------- + Name: pci63xx_int_write +Abstract: PCI Config write on internal device(s) + -------------------------------------------------------------------------- */ +static int +pci63xx_int_write(unsigned int devfn, int where, u32 * value, int size) +{ + if (PCI_SLOT(devfn) != USB_HOST_SLOT) { + return PCIBIOS_SUCCESSFUL; + } + + switch (size) { + case 1: + DPRINT("W => Slot: %d Where: %2X Len: %d Data: %02X\n", + PCI_SLOT(devfn), where, size, *value); + break; + case 2: + DPRINT("W => Slot: %d Where: %2X Len: %d Data: %04X\n", + PCI_SLOT(devfn), where, size, *value); + switch (where) { + case PCI_COMMAND: + usb_cfg_space_cmd_reg = *value; + break; + default: + break; + } + break; + case 4: + DPRINT("W => Slot: %d Where: %2X Len: %d Data: %08lX\n", + PCI_SLOT(devfn), where, size, *value); + switch (where) { + case PCI_BASE_ADDRESS_0: + if (*value == 0xffffffff) { + usb_mem_size_rd = TRUE; + } else { + usb_mem_base = *value; + } + break; + default: + break; + } + break; + default: + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +/* -------------------------------------------------------------------------- + Name: pci63xx_int_read +Abstract: PCI Config read on internal device(s) + -------------------------------------------------------------------------- */ +static int +pci63xx_int_read(unsigned int devfn, int where, u32 * value, int size) +{ + uint32 retValue = 0xFFFFFFFF; + + if (PCI_SLOT(devfn) != USB_HOST_SLOT) { + return PCIBIOS_SUCCESSFUL; + } + + // For now, this is specific to the USB Host controller. We can + // make it more general if we have to... + // Emulate PCI Config accesses + switch (where) { + case PCI_VENDOR_ID: + case PCI_DEVICE_ID: + retValue = PCI_VENDOR_ID_BROADCOM | 0x63000000; + break; + case PCI_COMMAND: + case PCI_STATUS: + retValue = (0x0006 << 16) | usb_cfg_space_cmd_reg; + break; + case PCI_CLASS_REVISION: + case PCI_CLASS_DEVICE: + retValue = (PCI_CLASS_SERIAL_USB << 16) | (0x10 << 8) | 0x01; + break; + case PCI_BASE_ADDRESS_0: + if (usb_mem_size_rd) { + retValue = USB_BAR0_MEM_SIZE; + } else { + if (usb_mem_base != 0) + retValue = usb_mem_base; + else + retValue = USB_HOST_BASE; + } + usb_mem_size_rd = FALSE; + break; + case PCI_CACHE_LINE_SIZE: + case PCI_LATENCY_TIMER: + retValue = 0; + break; + case PCI_HEADER_TYPE: + retValue = PCI_HEADER_TYPE_NORMAL; + break; + case PCI_SUBSYSTEM_VENDOR_ID: + retValue = PCI_VENDOR_ID_BROADCOM; + break; + case PCI_SUBSYSTEM_ID: + retValue = 0x6300; + break; + case PCI_INTERRUPT_LINE: + retValue = INTERRUPT_ID_USBH; + break; + default: + break; + } + + switch (size) { + case 1: + *value = (retValue >> ((where & 3) << 3)) & 0xff; + DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %02X\n", + PCI_SLOT(devfn), where, size, *value); + break; + case 2: + *value = (retValue >> ((where & 3) << 3)) & 0xffff; + DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %04X\n", + PCI_SLOT(devfn), where, size, *value); + break; + case 4: + *value = retValue; + DPRINT("R <= Slot: %d Where: %2X Len: %d Data: %08lX\n", + PCI_SLOT(devfn), where, size, *value); + break; + default: + break; + } + + return PCIBIOS_SUCCESSFUL; +} +#endif + +static int bcm96348_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); + uint32 data; + +#if defined(CONFIG_USB) + if (PCI_SLOT(devfn) == USB_HOST_SLOT) + return pci63xx_int_read(devfn, where, val, size); +#endif + + mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); + data = *(uint32 *)ioBase; + switch(size) { + case 1: + *val = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + *val = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + *val = data; + /* Special case for reading PCI device range */ + if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { + if (pci_mem_size_rd) { + /* bcm6348 PCI memory window minimum size is 64K */ + *val &= PCI_SIZE_64K; + } + } + break; + default: + break; + } + pci_mem_size_rd = FALSE; + mpi_ClearPciConfigAccess(); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm96348_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + volatile unsigned char *ioBase = (unsigned char *)(mpi->l2piobase | KSEG1); + uint32 data; + +#if defined(CONFIG_USB) + if (PCI_SLOT(devfn) == USB_HOST_SLOT) + return pci63xx_int_write(devfn, where, &val, size); +#endif + mpi_SetupPciConfigAccess(BCM_PCI_CFG(PCI_SLOT(devfn), PCI_FUNC(devfn), where)); + data = *(uint32 *)ioBase; + switch(size) { + case 1: + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + data = val; + /* Special case for reading PCI device range */ + if ((where >= PCI_BASE_ADDRESS_0) && (where <= PCI_BASE_ADDRESS_5)) { + if (val == 0xffffffff) + pci_mem_size_rd = TRUE; + } + break; + default: + break; + } + *(uint32 *)ioBase = data; + udelay(500); + mpi_ClearPciConfigAccess(); + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops bcm96348_pci_ops = { + .read = bcm96348_pcibios_read, + .write = bcm96348_pcibios_write +}; diff --git a/target/linux/easygate-2.6/files/arch/mips/pci/pci-bcm96348.c b/target/linux/easygate-2.6/files/arch/mips/pci/pci-bcm96348.c new file mode 100644 index 0000000000..b477e827bd --- /dev/null +++ b/target/linux/easygate-2.6/files/arch/mips/pci/pci-bcm96348.c @@ -0,0 +1,62 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +#include +#include +#include +#include + +#include + +static struct resource bcm_pci_io_resource = { + .name = "bcm96348 pci IO space", + .start = BCM_PCI_IO_BASE, + .end = BCM_PCI_IO_BASE + BCM_PCI_IO_SIZE_64KB - 1, + .flags = IORESOURCE_IO +}; + +static struct resource bcm_pci_mem_resource = { + .name = "bcm96348 pci memory space", + .start = BCM_PCI_MEM_BASE, + .end = BCM_PCI_MEM_BASE + BCM_PCI_MEM_SIZE_16MB - 1, + .flags = IORESOURCE_MEM +}; + +extern struct pci_ops bcm96348_pci_ops; + +struct pci_controller bcm96348_controller = { + .pci_ops = &bcm96348_pci_ops, + .io_resource = &bcm_pci_io_resource, + .mem_resource = &bcm_pci_mem_resource, +}; + +static __init int bcm96348_pci_init(void) +{ + /* Avoid ISA compat ranges. */ + PCIBIOS_MIN_IO = 0x00000000; + PCIBIOS_MIN_MEM = 0x00000000; + + /* Set I/O resource limits. */ + ioport_resource.end = 0x1fffffff; + iomem_resource.end = 0xffffffff; + + register_pci_controller(&bcm96348_controller); + return 0; +} + +subsys_initcall(bcm96348_pci_init); diff --git a/target/linux/easygate-2.6/files/drivers/mtd/maps/bcm963xx-flash.c b/target/linux/easygate-2.6/files/drivers/mtd/maps/bcm963xx-flash.c new file mode 100644 index 0000000000..3424749a5f --- /dev/null +++ b/target/linux/easygate-2.6/files/drivers/mtd/maps/bcm963xx-flash.c @@ -0,0 +1,467 @@ +/* + * Copyright (C) 2006 Felix Fietkau + * Copyright (C) 2005 Waldemar Brodkorb + * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) + * + * original functions for finding root filesystem from Mike Baker + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Copyright 2001-2003, Broadcom Corporation + * All Rights Reserved. + * + * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. + * + * Flash mapping for BCM963XX boards + */ + +#include +#include +#include +#include +#include +#include +#include +#ifdef CONFIG_MTD_PARTITIONS +#include +#endif +#include +#include +#include +#include + +#include + +extern int boot_loader_type; +extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); +static struct mtd_partition *parsed_parts; + + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ +#define TRX_VERSION 1 +#define TRX_MAX_LEN 0x3A0000 +#define TRX_NO_HEADER 1 /* Do not write TRX header */ +#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ +#define TRX_MAX_OFFSET 3 + +struct trx_header { + u32 magic; /* "HDR0" */ + u32 len; /* Length of file including header */ + u32 crc32; /* 32-bit CRC from flag_version to end of file */ + u32 flag_version; /* 0:15 flags, 16:31 version */ + u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ +}; + +#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) +#define NVRAM_SPACE 0x8000 +#define WINDOW_ADDR 0x1f000000 +#define WINDOW_SIZE 0x800000 +#define BUSWIDTH 2 + +#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ + +static struct mtd_info *bcm963xx_mtd; + +static struct map_info bcm963xx_map = { + .name = "Physically mapped flash", + .size = WINDOW_SIZE, + .bankwidth = BUSWIDTH, + .phys = WINDOW_ADDR, +}; + +#ifdef CONFIG_MTD_PARTITIONS + +static struct mtd_partition bcm963xx_parts[] = { + { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, }, + { name: "linux", offset: 0, size: 0, }, + { name: "rootfs", offset: 0, size: 0, }, + { name: "nvram", offset: 0, size: 0, }, + { name: "OpenWrt", offset: 0, size: 0, }, + { name: NULL, }, +}; + +static int __init +find_cfe_size(struct mtd_info *mtd, size_t size) +{ + struct trx_header *trx; + unsigned char buf[512]; + int off; + size_t len; + int blocksize; + + trx = (struct trx_header *) buf; + + blocksize = mtd->erasesize; + if (blocksize < 0x10000) + blocksize = 0x10000; + + for (off = (128*1024); off < size; off += blocksize) { + memset(buf, 0xe5, sizeof(buf)); + + /* + * Read into buffer + */ + if (mtd->read(mtd, off, sizeof(buf), &len, buf) || + len != sizeof(buf)) + continue; + + /* found a TRX header */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + goto found; + } + } + + printk(KERN_NOTICE + "%s: Couldn't find bootloader size\n", + mtd->name); + return -1; + + found: + printk(KERN_NOTICE "bootloader size: %d\n", off); + return off; + +} + +/* + * Copied from mtdblock.c + * + * Cache stuff... + * + * Since typical flash erasable sectors are much larger than what Linux's + * buffer cache can handle, we must implement read-modify-write on flash + * sectors for each block write requests. To avoid over-erasing flash sectors + * and to speed things up, we locally cache a whole flash sector while it is + * being written to until a different sector is required. + */ + +static void erase_callback(struct erase_info *done) +{ + wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; + wake_up(wait_q); +} + +static int erase_write (struct mtd_info *mtd, unsigned long pos, + int len, const char *buf) +{ + struct erase_info erase; + DECLARE_WAITQUEUE(wait, current); + wait_queue_head_t wait_q; + size_t retlen; + int ret; + + /* + * First, let's erase the flash block. + */ + + init_waitqueue_head(&wait_q); + erase.mtd = mtd; + erase.callback = erase_callback; + erase.addr = pos; + erase.len = len; + erase.priv = (u_long)&wait_q; + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&wait_q, &wait); + + ret = mtd->erase(mtd, &erase); + if (ret) { + set_current_state(TASK_RUNNING); + remove_wait_queue(&wait_q, &wait); + printk (KERN_WARNING "erase of region [0x%lx, 0x%x] " + "on \"%s\" failed\n", + pos, len, mtd->name); + return ret; + } + + schedule(); /* Wait for erase to finish. */ + remove_wait_queue(&wait_q, &wait); + + /* + * Next, writhe data to flash. + */ + + ret = mtd->write (mtd, pos, len, &retlen, buf); + if (ret) + return ret; + if (retlen != len) + return -EIO; + return 0; +} + + + + +static int __init +find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part) +{ + struct trx_header trx, *trx2; + unsigned char buf[512], *block; + int off, blocksize; + u32 i, crc = ~0; + size_t len; + struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; + + blocksize = mtd->erasesize; + if (blocksize < 0x10000) + blocksize = 0x10000; + + for (off = (128*1024); off < size; off += blocksize) { + memset(&trx, 0xe5, sizeof(trx)); + + /* + * Read into buffer + */ + if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) || + len != sizeof(trx)) + continue; + + /* found a TRX header */ + if (le32_to_cpu(trx.magic) == TRX_MAGIC) { + part->offset = le32_to_cpu(trx.offsets[2]) ? : + le32_to_cpu(trx.offsets[1]); + part->size = le32_to_cpu(trx.len); + + part->size -= part->offset; + part->offset += off; + + goto found; + } + } + + printk(KERN_NOTICE + "%s: Couldn't find root filesystem\n", + mtd->name); + return -1; + + found: + if (part->size == 0) + return 0; + + if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf)) + return 0; + + if (*((__u32 *) buf) == SQUASHFS_MAGIC) { + printk(KERN_INFO "%s: Filesystem type: squashfs, size=0x%x\n", mtd->name, (u32) sb->bytes_used); + + /* Update the squashfs partition size based on the superblock info */ + part->size = sb->bytes_used; + len = part->offset + part->size; + len += (mtd->erasesize - 1); + len &= ~(mtd->erasesize - 1); + part->size = len - part->offset; + } else if (*((__u16 *) buf) == JFFS2_MAGIC_BITMASK) { + printk(KERN_INFO "%s: Filesystem type: jffs2\n", mtd->name); + + /* Move the squashfs outside of the trx */ + part->size = 0; + } else { + printk(KERN_INFO "%s: Filesystem type: unknown\n", mtd->name); + return 0; + } + + if (trx.len != part->offset + part->size - off) { + /* Update the trx offsets and length */ + trx.len = part->offset + part->size - off; + + /* Update the trx crc32 */ + for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) { + if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf)) + return 0; + crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i)); + } + trx.crc32 = crc; + + /* read first eraseblock from the trx */ + block = kmalloc(mtd->erasesize, GFP_KERNEL); + trx2 = (struct trx_header *) block; + if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) { + printk("Error accessing the first trx eraseblock\n"); + return 0; + } + + printk("Updating TRX offsets and length:\n"); + printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32); + printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32); + + /* Write updated trx header to the flash */ + memcpy(block, &trx, sizeof(trx)); + if (mtd->unlock) + mtd->unlock(mtd, off, mtd->erasesize); + erase_write(mtd, off, mtd->erasesize, block); + if (mtd->sync) + mtd->sync(mtd); + kfree(block); + printk("Done\n"); + } + + return part->size; +} + +struct mtd_partition * __init +init_mtd_partitions(struct mtd_info *mtd, size_t size) +{ + int cfe_size; + + if ((cfe_size = find_cfe_size(mtd,size)) < 0) + return NULL; + + /* boot loader */ + bcm963xx_parts[0].offset = 0; + bcm963xx_parts[0].size = cfe_size; + + /* nvram */ + if (cfe_size != 384 * 1024) { + bcm963xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize); + bcm963xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); + } else { + /* nvram (old 128kb config partition on netgear wgt634u) */ + bcm963xx_parts[3].offset = bcm963xx_parts[0].size; + bcm963xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); + } + + /* linux (kernel and rootfs) */ + if (cfe_size != 384 * 1024) { + bcm963xx_parts[1].offset = bcm963xx_parts[0].size; + bcm963xx_parts[1].size = bcm963xx_parts[3].offset - + bcm963xx_parts[1].offset; + } else { + /* do not count the elf loader, which is on one block */ + bcm963xx_parts[1].offset = bcm963xx_parts[0].size + + bcm963xx_parts[3].size + mtd->erasesize; + bcm963xx_parts[1].size = size - + bcm963xx_parts[0].size - + (2*bcm963xx_parts[3].size) - + mtd->erasesize; + } + + /* find and size rootfs */ + if (find_root(mtd,size,&bcm963xx_parts[2])==0) { + /* entirely jffs2 */ + bcm963xx_parts[4].name = NULL; + bcm963xx_parts[2].size = size - bcm963xx_parts[2].offset - + bcm963xx_parts[3].size; + } else { + /* legacy setup */ + /* calculate leftover flash, and assign it to the jffs2 partition */ + if (cfe_size != 384 * 1024) { + bcm963xx_parts[4].offset = bcm963xx_parts[2].offset + + bcm963xx_parts[2].size; + if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) { + bcm963xx_parts[4].offset += mtd->erasesize - + (bcm963xx_parts[4].offset % mtd->erasesize); + } + bcm963xx_parts[4].size = bcm963xx_parts[3].offset - + bcm963xx_parts[4].offset; + } else { + bcm963xx_parts[4].offset = bcm963xx_parts[2].offset + + bcm963xx_parts[2].size; + if ((bcm963xx_parts[4].offset % mtd->erasesize) > 0) { + bcm963xx_parts[4].offset += mtd->erasesize - + (bcm963xx_parts[4].offset % mtd->erasesize); + } + bcm963xx_parts[4].size = size - bcm963xx_parts[3].size - + bcm963xx_parts[4].offset; + } + } + + return bcm963xx_parts; +} +#endif + +int __init init_bcm963xx_map(void) +{ + size_t size; + int ret = 0; + struct mtd_partition *parts; + int i; + + printk("BCM963xx flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE); + bcm963xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE); + + if (!bcm963xx_map.virt) { + printk("Failed to ioremap\n"); + return -EIO; + } + + simple_map_init(&bcm963xx_map); + + if (!(bcm963xx_mtd = do_map_probe("jedec_probe", &bcm963xx_map))) { + printk("Failed to jedec_probe\n"); + iounmap((void *)bcm963xx_map.virt); + return -ENXIO; + } + + bcm963xx_mtd->owner = THIS_MODULE; + + size = bcm963xx_mtd->size; + + printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR); + + if (boot_loader_type == BOOT_LOADER_REDBOOT) { + int parsed_nr_parts = 0; + char * part_type; + + if (bcm963xx_mtd->size > 0x00400000) { + printk("Support for extended flash memory size : 0x%08X ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd->size); + bcm963xx_map.virt = (unsigned long)EXTENDED_SIZE; + } + + if (parsed_nr_parts == 0) { + int ret = parse_redboot_partitions(bcm963xx_mtd, &parsed_parts, 0); + if (ret > 0) { + part_type = "RedBoot"; + parsed_nr_parts = ret; + } + } + add_mtd_partitions(bcm963xx_mtd, parsed_parts, parsed_nr_parts); + } + else { + parts = init_mtd_partitions(bcm963xx_mtd, size); + for (i = 0; parts[i].name; i++); + ret = add_mtd_partitions(bcm963xx_mtd, parts, i); + if (ret) { + printk(KERN_ERR "Flash: add_mtd_partitions failed\n"); + goto fail; + } + } + return 0; + + fail: + if (bcm963xx_mtd) + map_destroy(bcm963xx_mtd); + if (bcm963xx_map.virt) + iounmap((void *)bcm963xx_map.virt); + bcm963xx_map.virt = 0; + return ret; +} + +void __exit cleanup_bcm963xx_map(void) +{ + del_mtd_partitions(bcm963xx_mtd); + map_destroy(bcm963xx_mtd); + iounmap((void *)bcm963xx_map.virt); +} + +module_init(init_bcm963xx_map); +module_exit(cleanup_bcm963xx_map); diff --git a/target/linux/easygate-2.6/files/drivers/serial/bcm63xx_cons.c b/target/linux/easygate-2.6/files/drivers/serial/bcm63xx_cons.c new file mode 100644 index 0000000000..4693779773 --- /dev/null +++ b/target/linux/easygate-2.6/files/drivers/serial/bcm63xx_cons.c @@ -0,0 +1,1042 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +/* Description: Serial port driver for the BCM963XX. */ + +#define CARDNAME "bcm963xx_serial driver" +#define VERSION "2.0" +#define VER_STR CARDNAME " v" VERSION "\n" + + +#include +#include +#include +#include +#include +#include +#include + +/* for definition of struct console */ +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include <6348_map_part.h> +#include <6348_intr.h> + +static DEFINE_SPINLOCK(bcm963xx_serial_lock); + +extern void _putc(char); +extern void _puts(const char *); + +typedef struct bcm_serial { + volatile Uart *port; + int type; + int flags; + int irq; + int baud_base; + int blocked_open; + unsigned short close_delay; + unsigned short closing_wait; + unsigned short line; /* port/line number */ + unsigned short cflags; /* line configuration flag */ + unsigned short x_char; /* xon/xoff character */ + unsigned short read_status_mask; /* mask for read condition */ + unsigned short ignore_status_mask; /* mask for ignore condition */ + unsigned long event; /* mask used in BH */ + int xmit_head; /* Position of the head */ + int xmit_tail; /* Position of the tail */ + int xmit_cnt; /* Count of the chars in the buffer */ + int count; /* indicates how many times it has been opened */ + int magic; + + struct async_icount icount; /* keep track of things ... */ + struct tty_struct *tty; /* tty associated */ + struct termios normal_termios; + + wait_queue_head_t open_wait; + wait_queue_head_t close_wait; + + long session; /* Session of opening process */ + long pgrp; /* pgrp of opening process */ + + unsigned char is_initialized; +} Context; + + +/*---------------------------------------------------------------------*/ +/* Define bits in the Interrupt Enable register */ +/*---------------------------------------------------------------------*/ +/* Enable receive interrupt */ +#define RXINT (RXFIFONE|RXOVFERR) + +/* Enable transmit interrupt */ +#define TXINT (TXFIFOEMT|TXUNDERR|TXOVFERR) + +/* Enable receiver line status interrupt */ +#define LSINT (RXBRK|RXPARERR|RXFRAMERR) + +#define BCM_NUM_UARTS 1 + +#define BD_BCM63XX_TIMER_CLOCK_INPUT (FPERIPH) + + +static struct bcm_serial multi[BCM_NUM_UARTS]; +static struct bcm_serial *lines[BCM_NUM_UARTS]; +static struct tty_driver *serial_driver; +static struct termios *serial_termios[BCM_NUM_UARTS]; +static struct termios *serial_termios_locked[BCM_NUM_UARTS]; + + +static void bcm_stop(struct tty_struct *tty); +static void bcm_start(struct tty_struct *tty); +static inline void receive_chars(struct bcm_serial *info); +static int startup(struct bcm_serial *info); +static void shutdown(struct bcm_serial *info); +static void change_speed(volatile Uart * pUart, tcflag_t cFlag); +static void bcm63xx_cons_flush_chars(struct tty_struct *tty); +static int bcm63xx_cons_write(struct tty_struct *tty, + const unsigned char *buf, int count); +static int bcm63xx_cons_write_room(struct tty_struct *tty); +static int bcm_chars_in_buffer(struct tty_struct *tty); +static void bcm_flush_buffer(struct tty_struct *tty); +static void bcm_throttle(struct tty_struct *tty); +static void bcm_unthrottle(struct tty_struct *tty); +static void bcm_send_xchar(struct tty_struct *tty, char ch); +static int get_serial_info(struct bcm_serial *info, + struct serial_struct *retinfo); +static int set_serial_info(struct bcm_serial *info, + struct serial_struct *new_info); +static int get_lsr_info(struct bcm_serial *info, unsigned int *value); +static void send_break(struct bcm_serial *info, int duration); +static int bcm_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void bcm_set_termios(struct tty_struct *tty, + struct termios *old_termios); +static void bcm63xx_cons_close(struct tty_struct *tty, struct file *filp); +static void bcm_hangup(struct tty_struct *tty); +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct bcm_serial *info); +static int bcm63xx_cons_open(struct tty_struct *tty, struct file *filp); +static int __init bcm63xx_serialinit(void); + + +/* + * ------------------------------------------------------------ + * rs_stop () and rs_start () + * + * These routines are called before setting or resetting + * tty->stopped. They enable or disable transmitter interrupts, + * as necessary. + * ------------------------------------------------------------ + */ +static void bcm_stop(struct tty_struct *tty) +{ +} + +static void bcm_start(struct tty_struct *tty) +{ + _puts(CARDNAME " Start\n"); +} + +/* + * ------------------------------------------------------------ + * receive_char () + * + * This routine deals with inputs from any lines. + * ------------------------------------------------------------ + */ +static inline void receive_chars(struct bcm_serial *info) +{ + struct tty_struct *tty = 0; + struct async_icount *icount; + int ignore = 0; + unsigned short status, tmp; + UCHAR ch = 0; + while ((status = info->port->intStatus) & RXINT) { + char flag_char = TTY_NORMAL; + + if (status & RXFIFONE) + ch = info->port->Data; // Read the character + tty = info->tty; /* now tty points to the proper dev */ + icount = &info->icount; + if (!tty) + break; + if (!tty_buffer_request_room(tty, 1)) + break; + icount->rx++; + if (status & RXBRK) { + flag_char = TTY_BREAK; + icount->brk++; + } + // keep track of the statistics + if (status & (RXFRAMERR | RXPARERR | RXOVFERR)) { + if (status & RXPARERR) /* parity error */ + icount->parity++; + else if (status & RXFRAMERR) /* frame error */ + icount->frame++; + if (status & RXOVFERR) { + // Overflow. Reset the RX FIFO + info->port->fifoctl |= RSTRXFIFOS; + icount->overrun++; + } + // check to see if we should ignore the character + // and mask off conditions that should be ignored + if (status & info->ignore_status_mask) { + if (++ignore > 100) + break; + goto ignore_char; + } + // Mask off the error conditions we want to ignore + tmp = status & info->read_status_mask; + if (tmp & RXPARERR) { + flag_char = TTY_PARITY; + } else if (tmp & RXFRAMERR) { + flag_char = TTY_FRAME; + } + if (tmp & RXOVFERR) { + tty_insert_flip_char(tty, ch, flag_char); + ch = 0; + flag_char = TTY_OVERRUN; + if (!tty_buffer_request_room(tty, 1)) + break; + } + } + tty_insert_flip_char(tty, ch, flag_char); + } + ignore_char:; + tty_flip_buffer_push(tty); + tty_schedule_flip(tty); + +} + + +/* + * ------------------------------------------------------------ + * bcm_interrupt () + * + * this is the main interrupt routine for the chip. + * It deals with the multiple ports. + * ------------------------------------------------------------ + */ +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) +static irqreturn_t bcm_interrupt(int irq, void *dev) +#else +static void bcm_interrupt(int irq, void *dev, struct pt_regs *regs) +#endif +{ + struct bcm_serial *info = lines[0]; + UINT16 intStat; + + /* get pending interrupt flags from UART */ + + /* Mask with only the serial interrupts that are enabled */ + intStat = info->port->intStatus & info->port->intMask; + while (intStat) { + if (intStat & RXINT) + receive_chars(info); + else if (intStat & TXINT) + info->port->intStatus = TXINT; + else /* don't know what it was, so let's mask it */ + info->port->intMask &= ~intStat; + + intStat = info->port->intStatus & info->port->intMask; + } + + // Clear the interrupt + enable_brcm_irq(INTERRUPT_ID_UART); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + return IRQ_HANDLED; +#endif +} + +/* + * ------------------------------------------------------------------- + * startup () + * + * various initialization tasks + * ------------------------------------------------------------------- + */ +static int startup(struct bcm_serial *info) +{ + // Port is already started... + return 0; +} + +/* + * ------------------------------------------------------------------- + * shutdown () + * + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + * ------------------------------------------------------------------- + */ +static void shutdown(struct bcm_serial *info) +{ + unsigned long flags; + if (!info->is_initialized) + return; + + spin_lock_irqsave(&bcm963xx_serial_lock, flags); + + info->port->control &= ~(BRGEN | TXEN | RXEN); + if (info->tty) + set_bit(TTY_IO_ERROR, &info->tty->flags); + info->is_initialized = 0; + + spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); +} + +/* + * ------------------------------------------------------------------- + * change_speed () + * + * Set the baud rate, character size, parity and stop bits. + * ------------------------------------------------------------------- + */ +static void change_speed(volatile Uart * pUart, tcflag_t cFlag) +{ + unsigned long ulFlags, ulBaud, ulClockFreqHz, ulTmp; + + spin_lock_irqsave(&bcm963xx_serial_lock, ulFlags); + switch (cFlag & (CBAUD | CBAUDEX)) { + case B115200: + ulBaud = 115200; + break; + case B57600: + ulBaud = 57600; + break; + case B38400: + ulBaud = 38400; + break; + case B19200: + ulBaud = 19200; + break; + case B9600: + ulBaud = 9600; + break; + case B4800: + ulBaud = 4800; + break; + case B2400: + ulBaud = 2400; + break; + case B1800: + ulBaud = 1800; + break; + case B1200: + ulBaud = 1200; + break; + case B600: + ulBaud = 600; + break; + case B300: + ulBaud = 300; + break; + case B200: + ulBaud = 200; + break; + case B150: + ulBaud = 150; + break; + case B134: + ulBaud = 134; + break; + case B110: + ulBaud = 110; + break; + case B75: + ulBaud = 75; + break; + case B50: + ulBaud = 50; + break; + default: + ulBaud = 115200; + break; + } + + /* Calculate buad rate. */ + ulClockFreqHz = BD_BCM63XX_TIMER_CLOCK_INPUT; + ulTmp = (ulClockFreqHz / ulBaud) / 16; + if (ulTmp & 0x01) + ulTmp /= 2; /* Rounding up, so sub is already accounted for */ + else + ulTmp = (ulTmp / 2) - 1; /* Rounding down so we must sub 1 */ + pUart->baudword = ulTmp; + + /* Set character size, stop bits and parity. */ + switch (cFlag & CSIZE) { + case CS5: + ulTmp = BITS5SYM; /* select transmit 5 bit data size */ + break; + case CS6: + ulTmp = BITS6SYM; /* select transmit 6 bit data size */ + break; + case CS7: + ulTmp = BITS7SYM; /* select transmit 7 bit data size */ + break; + default: + ulTmp = BITS8SYM; /* select transmit 8 bit data size */ + break; + } + if (cFlag & CSTOPB) + ulTmp |= TWOSTOP; /* select 2 stop bits */ + else + ulTmp |= ONESTOP; /* select one stop bit */ + + /* Write these values into the config reg. */ + pUart->config = ulTmp; + pUart->control &= + ~(RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN); + switch (cFlag & (PARENB | PARODD)) { + case PARENB | PARODD: + pUart->control |= RXPARITYEN | TXPARITYEN; + break; + case PARENB: + pUart->control |= + RXPARITYEN | TXPARITYEN | RXPARITYEVEN | TXPARITYEVEN; + break; + default: + pUart->control |= 0; + break; + } + + /* Reset and flush uart */ + pUart->fifoctl = RSTTXFIFOS | RSTRXFIFOS; + spin_unlock_irqrestore(&bcm963xx_serial_lock, ulFlags); +} + + +/* + * ------------------------------------------------------------------- + * bcm_flush_char () + * + * Nothing to flush. Polled I/O is used. + * ------------------------------------------------------------------- + */ +static void bcm63xx_cons_flush_chars(struct tty_struct *tty) +{ +} + + +/* + * ------------------------------------------------------------------- + * bcm63xx_cons_write () + * + * Main output routine using polled I/O. + * ------------------------------------------------------------------- + */ +static int bcm63xx_cons_write(struct tty_struct *tty, + const unsigned char *buf, int count) +{ + int c; + + for (c = 0; c < count; c++) + _putc(buf[c]); + return count; +} + +/* + * ------------------------------------------------------------------- + * bcm63xx_cons_write_room () + * + * Compute the amount of space available for writing. + * ------------------------------------------------------------------- + */ +static int bcm63xx_cons_write_room(struct tty_struct *tty) +{ + /* Pick a number. Any number. Polled I/O is used. */ + return 1024; +} + +/* + * ------------------------------------------------------------------- + * bcm_chars_in_buffer () + * + * compute the amount of char left to be transmitted + * ------------------------------------------------------------------- + */ +static int bcm_chars_in_buffer(struct tty_struct *tty) +{ + return 0; +} + +/* + * ------------------------------------------------------------------- + * bcm_flush_buffer () + * + * Empty the output buffer + * ------------------------------------------------------------------- + */ +static void bcm_flush_buffer(struct tty_struct *tty) +{ + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * bcm_throttle () and bcm_unthrottle () + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled (or not). + * ------------------------------------------------------------ + */ +static void bcm_throttle(struct tty_struct *tty) +{ + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); +} + +static void bcm_unthrottle(struct tty_struct *tty) +{ + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } +} + +static void bcm_send_xchar(struct tty_struct *tty, char ch) +{ + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + info->x_char = ch; + if (ch) + bcm_start(info->tty); +} + +/* + * ------------------------------------------------------------ + * rs_ioctl () and friends + * ------------------------------------------------------------ + */ +static int get_serial_info(struct bcm_serial *info, + struct serial_struct *retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = (int) info->port; + tmp.irq = info->irq; + tmp.flags = 0; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + + return copy_to_user(retinfo, &tmp, sizeof(*retinfo)); +} + +static int set_serial_info(struct bcm_serial *info, + struct serial_struct *new_info) +{ + struct serial_struct new_serial; + struct bcm_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + + copy_from_user(&new_serial, new_info, sizeof(new_serial)); + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + + if (info->count > 1) + return -EBUSY; + + /* OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + info->baud_base = new_serial.baud_base; + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct bcm_serial *info, unsigned int *value) +{ + return (0); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(struct bcm_serial *info, int duration) +{ + unsigned long flags; + + if (!info->port) + return; + + current->state = TASK_INTERRUPTIBLE; + + /*save_flags (flags); + cli(); */ + spin_lock_irqsave(&bcm963xx_serial_lock, flags); + + info->port->control |= XMITBREAK; + schedule_timeout(duration); + info->port->control &= ~XMITBREAK; + + spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); + //restore_flags (flags); +} + +static int bcm_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int error; + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + int retval; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + switch (cmd) { + + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, HZ / 4); /* 1/4 second */ + return 0; + + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg * (HZ / 10) : HZ / 4); + return 0; + + case TIOCGSOFTCAR: + error = + access_ok(VERIFY_WRITE, (void *) arg, sizeof(long)); + if (!error) + return -EFAULT; + else { + put_user(C_CLOCAL(tty) ? 1 : 0, + (unsigned long *) arg); + return 0; + } + + case TIOCSSOFTCAR: + error = get_user(arg, (unsigned long *) arg); + if (error) + return error; + tty->termios->c_cflag = + ((tty->termios-> + c_cflag & ~CLOCAL) | (arg ? CLOCAL : 0)); + return 0; + + case TIOCGSERIAL: + error = + access_ok(VERIFY_WRITE, (void *) arg, + sizeof(struct serial_struct)); + if (!error) + return -EFAULT; + else + return get_serial_info(info, + (struct serial_struct *) + arg); + + case TIOCSSERIAL: + return set_serial_info(info, (struct serial_struct *) arg); + + case TIOCSERGETLSR: /* Get line status register */ + error = + access_ok(VERIFY_WRITE, (void *) arg, + sizeof(unsigned int)); + if (!error) + return -EFAULT; + else + return get_lsr_info(info, (unsigned int *) arg); + + case TIOCSERGSTRUCT: + error = + access_ok(VERIFY_WRITE, (void *) arg, + sizeof(struct bcm_serial)); + if (!error) + return -EFAULT; + else { + copy_to_user((struct bcm_serial *) arg, info, + sizeof(struct bcm_serial)); + return 0; + } + + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void bcm_set_termios(struct tty_struct *tty, + struct termios *old_termios) +{ + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + + if (tty->termios->c_cflag != old_termios->c_cflag) + change_speed(info->port, tty->termios->c_cflag); +} + +/* + * ------------------------------------------------------------ + * bcm63xx_cons_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we turn off + * the transmit enable and receive enable flags. + * ------------------------------------------------------------ + */ +static void bcm63xx_cons_close(struct tty_struct *tty, struct file *filp) +{ + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + unsigned long flags; + + if (!info) + return; + + /*save_flags (flags); + cli(); */ + spin_lock_irqsave(&bcm963xx_serial_lock, flags); + + if (tty_hung_up_p(filp)) { + spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); + //restore_flags (flags); + return; + } + + if ((tty->count == 1) && (info->count != 1)) { + + /* Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk + ("bcm63xx_cons_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + + if (--info->count < 0) { + printk("ds_close: bad serial port count for ttys%d: %d\n", + info->line, info->count); + info->count = 0; + } + + if (info->count) { + //restore_flags (flags); + spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); + return; + } + + /* Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + + /* At this point we stop accepting input. To do this, we + * disable the receive line status interrupts. + */ + shutdown(info); +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + if (tty->driver->flush_buffer) + tty->driver->flush_buffer(tty); +#else + if (tty->driver.flush_buffer) + tty->driver.flush_buffer(tty); +#endif + if (tty->ldisc.flush_buffer) + tty->ldisc.flush_buffer(tty); + + tty->closing = 0; + info->event = 0; + info->tty = 0; + if (tty->ldisc.num != tty_ldisc_get(N_TTY)->num) { + if (tty->ldisc.close) + (tty->ldisc.close) (tty); + tty->ldisc = *tty_ldisc_get(N_TTY); + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open) (tty); + } + if (info->blocked_open) { + if (info->close_delay) { + current->state = TASK_INTERRUPTIBLE; + schedule_timeout(info->close_delay); + } + wake_up_interruptible(&info->open_wait); + } + wake_up_interruptible(&info->close_wait); + + //restore_flags (flags); + spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); +} + +/* + * bcm_hangup () --- called by tty_hangup() when a hangup is signaled. + */ +static void bcm_hangup(struct tty_struct *tty) +{ + + struct bcm_serial *info = (struct bcm_serial *) tty->driver_data; + + shutdown(info); + info->event = 0; + info->count = 0; + info->tty = 0; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file *filp, + struct bcm_serial *info) +{ + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port. It also performs the + * serial-specific initialization for the tty structure. + */ +static int bcm63xx_cons_open(struct tty_struct *tty, struct file *filp) +{ + struct bcm_serial *info; + int retval, line; + + // Make sure we're only opening on of the ports we support +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + line = MINOR(tty->driver->cdev.dev) - tty->driver->minor_start; +#else + line = MINOR(tty->device) - tty->driver.minor_start; +#endif + + if ((line < 0) || (line >= BCM_NUM_UARTS)) + return -ENODEV; + + info = lines[line]; + + tty->low_latency = 1; + info->port->intMask = 0; /* Clear any pending interrupts */ + info->port->intMask = RXINT; /* Enable RX */ + + info->count++; + tty->driver_data = info; + info->tty = tty; + enable_brcm_irq(INTERRUPT_ID_UART); + + // Start up serial port + retval = startup(info); + if (retval) + return retval; + + retval = block_til_ready(tty, filp, info); + if (retval) + return retval; + + +#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) + info->pgrp = process_group(current); + info->session = current->signal->session; +#else + info->session = current->session; + info->pgrp = current->pgrp; +#endif + + return 0; +} + + +static struct tty_operations rs_ops = { + .open = bcm63xx_cons_open, + .close = bcm63xx_cons_close, + .write = bcm63xx_cons_write, + .flush_chars = bcm63xx_cons_flush_chars, + .write_room = bcm63xx_cons_write_room, + .chars_in_buffer = bcm_chars_in_buffer, + .flush_buffer = bcm_flush_buffer, + .ioctl = bcm_ioctl, + .throttle = bcm_throttle, + .unthrottle = bcm_unthrottle, + .send_xchar = bcm_send_xchar, + .set_termios = bcm_set_termios, + .stop = bcm_stop, + .start = bcm_start, + .hangup = bcm_hangup, +}; + +/* -------------------------------------------------------------------------- + Name: bcm63xx_serialinit + Purpose: Initialize our BCM63xx serial driver +-------------------------------------------------------------------------- */ +static int __init bcm63xx_serialinit(void) +{ + int i, flags; + struct bcm_serial *info; + + // Print the driver version information + printk(VER_STR); + serial_driver = alloc_tty_driver(BCM_NUM_UARTS); + if (!serial_driver) + return -ENOMEM; + + serial_driver->owner = THIS_MODULE; + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->num = 1; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + + serial_driver->termios = serial_termios; + serial_driver->termios_locked = serial_termios_locked; + + tty_set_operations(serial_driver, &rs_ops); + + if (tty_register_driver(serial_driver)) + panic("Couldn't register serial driver\n"); + + //save_flags(flags); cli(); + spin_lock_irqsave(&bcm963xx_serial_lock, flags); + + for (i = 0; i < 1; i++) { + info = &multi[i]; + lines[i] = info; + info->magic = SERIAL_MAGIC; + info->port = (Uart *) ((char *) UART_BASE + (i * 0x20)); + info->tty = 0; + info->irq = (2 - i) + 8; + info->line = i; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + info->normal_termios = serial_driver->init_termios; + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + + /* If we are pointing to address zero then punt - not correctly + * set up in setup.c to handle this. + */ + if (!info->port) + return 0; + BcmHalMapInterrupt(bcm_interrupt, 0, INTERRUPT_ID_UART); + } + + /* order matters here... the trick is that flags + * is updated... in request_irq - to immediatedly obliterate + * it is unwise. + */ + spin_unlock_irqrestore(&bcm963xx_serial_lock, flags); + return 0; +} + +module_init(bcm63xx_serialinit); + +/* -------------------------------------------------------------------------- + Name: bcm_console_print + Purpose: bcm_console_print is registered for printk. + The console_lock must be held when we get here. +-------------------------------------------------------------------------- */ +static void bcm_console_print(struct console *cons, const char *str, + unsigned int count) +{ + unsigned int i; + //_puts(str); + for (i = 0; i < count; i++, str++) { + _putc(*str); + if (*str == 10) { + _putc(13); + } + } +} + +static struct tty_driver *bcm_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + +static int __init bcm_console_setup(struct console *co, char *options) +{ + return 0; +} + +static struct console bcm_sercons = { + .name = "ttyS", + .write = bcm_console_print, + .device = bcm_console_device, + .setup = bcm_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + +static int __init bcm63xx_console_init(void) +{ + register_console(&bcm_sercons); + return 0; +} + +console_initcall(bcm63xx_console_init); diff --git a/target/linux/easygate-2.6/files/include/asm-mips/cfe.h b/target/linux/easygate-2.6/files/include/asm-mips/cfe.h new file mode 100644 index 0000000000..47c3f5613d --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/cfe.h @@ -0,0 +1,189 @@ +/* + * Broadcom Common Firmware Environment (CFE) support + * + * Copyright 2000, 2001, 2002 + * Broadcom Corporation. All rights reserved. + * + * Copyright (C) 2006 Michael Buesch + * + * Original Authors: Mitch Lichtenberg, Chris Demetriou + * + * This software is furnished under license and may be used and copied only + * in accordance with the following terms and conditions. Subject to these + * conditions, you may download, copy, install, use, modify and distribute + * modified or unmodified copies of this software in source and/or binary + * form. No title or ownership is transferred hereby. + * + * 1) Any source code used, modified or distributed must reproduce and + * retain this copyright notice and list of conditions as they appear in + * the source file. + * + * 2) No right is granted to use any trade name, trademark, or logo of + * Broadcom Corporation. The "Broadcom Corporation" name may not be + * used to endorse or promote products derived from this software + * without the prior written permission of Broadcom Corporation. + * + * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR + * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE + * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE + * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR + * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, + * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE + * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef LINUX_CFE_API_H_ +#define LINUX_CFE_API_H_ + +#include + + +#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ +#define CFE_MI_AVAILABLE 1 /* memory is available */ + +#define CFE_FLG_WARMSTART 0x00000001 +#define CFE_FLG_FULL_ARENA 0x00000001 +#define CFE_FLG_ENV_PERMANENT 0x00000001 + +#define CFE_CPU_CMD_START 1 +#define CFE_CPU_CMD_STOP 0 + +#define CFE_STDHANDLE_CONSOLE 0 + +#define CFE_DEV_NETWORK 1 +#define CFE_DEV_DISK 2 +#define CFE_DEV_FLASH 3 +#define CFE_DEV_SERIAL 4 +#define CFE_DEV_CPU 5 +#define CFE_DEV_NVRAM 6 +#define CFE_DEV_CLOCK 7 +#define CFE_DEV_OTHER 8 +#define CFE_DEV_MASK 0x0F + +#define CFE_CACHE_FLUSH_D 1 +#define CFE_CACHE_INVAL_I 2 +#define CFE_CACHE_INVAL_D 4 +#define CFE_CACHE_INVAL_L2 8 + +#define CFE_FWI_64BIT 0x00000001 +#define CFE_FWI_32BIT 0x00000002 +#define CFE_FWI_RELOC 0x00000004 +#define CFE_FWI_UNCACHED 0x00000008 +#define CFE_FWI_MULTICPU 0x00000010 +#define CFE_FWI_FUNCSIM 0x00000020 +#define CFE_FWI_RTLSIM 0x00000040 + +struct cfe_fwinfo { + s64 version; /* major, minor, eco version */ + s64 totalmem; /* total installed mem */ + s64 flags; /* various flags */ + s64 boardid; /* board ID */ + s64 bootarea_va; /* VA of boot area */ + s64 bootarea_pa; /* PA of boot area */ + s64 bootarea_size; /* size of boot area */ +}; + + +/* The public CFE API */ + +int cfe_present(void); /* Check if we booted from CFE. Returns bool */ + +int cfe_getticks(s64 *ticks); +int cfe_close(int handle); +int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1); +int cfe_cpu_stop(int cpu); +int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); +int cfe_enumdev(int idx, char *name, int namelen); +int cfe_enummem(int idx, int flags, u64 *start, u64 *length, + u64 *type); +int cfe_exit(int warm, int status); +int cfe_flushcache(int flags); +int cfe_getdevinfo(char *name); +int cfe_getenv(char *name, char *dest, int destlen); +int cfe_getfwinfo(struct cfe_fwinfo *info); +int cfe_getstdhandle(int handletype); +int cfe_inpstat(int handle); +int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, + int length, int *retlen, u64 offset); +int cfe_open(char *name); +int cfe_read(int handle, unsigned char *buffer, int length); +int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length); +int cfe_setenv(char *name, char *val); +int cfe_write(int handle, unsigned char *buffer, int length); +int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, + int length); + + +/* High level API */ + +/* Print some information to CFE's console (most likely serial line) */ +int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2))); +int cfe_vprintk(const char *fmt, va_list args); + + + +/* Error codes returned by the low API functions */ + +#define CFE_ISERR(errcode) (errcode < 0) + +#define CFE_OK 0 +#define CFE_ERR -1 /* generic error */ +#define CFE_ERR_INV_COMMAND -2 +#define CFE_ERR_EOF -3 +#define CFE_ERR_IOERR -4 +#define CFE_ERR_NOMEM -5 +#define CFE_ERR_DEVNOTFOUND -6 +#define CFE_ERR_DEVOPEN -7 +#define CFE_ERR_INV_PARAM -8 +#define CFE_ERR_ENVNOTFOUND -9 +#define CFE_ERR_ENVREADONLY -10 + +#define CFE_ERR_NOTELF -11 +#define CFE_ERR_NOT32BIT -12 +#define CFE_ERR_WRONGENDIAN -13 +#define CFE_ERR_BADELFVERS -14 +#define CFE_ERR_NOTMIPS -15 +#define CFE_ERR_BADELFFMT -16 +#define CFE_ERR_BADADDR -17 + +#define CFE_ERR_FILENOTFOUND -18 +#define CFE_ERR_UNSUPPORTED -19 + +#define CFE_ERR_HOSTUNKNOWN -20 + +#define CFE_ERR_TIMEOUT -21 + +#define CFE_ERR_PROTOCOLERR -22 + +#define CFE_ERR_NETDOWN -23 +#define CFE_ERR_NONAMESERVER -24 + +#define CFE_ERR_NOHANDLES -25 +#define CFE_ERR_ALREADYBOUND -26 + +#define CFE_ERR_CANNOTSET -27 +#define CFE_ERR_NOMORE -28 +#define CFE_ERR_BADFILESYS -29 +#define CFE_ERR_FSNOTAVAIL -30 + +#define CFE_ERR_INVBOOTBLOCK -31 +#define CFE_ERR_WRONGDEVTYPE -32 +#define CFE_ERR_BBCHECKSUM -33 +#define CFE_ERR_BOOTPROGCHKSUM -34 + +#define CFE_ERR_LDRNOTAVAIL -35 + +#define CFE_ERR_NOTREADY -36 + +#define CFE_ERR_GETMEM -37 +#define CFE_ERR_SETMEM -38 + +#define CFE_ERR_NOTCONN -39 +#define CFE_ERR_ADDRINUSE -40 + + +#endif /* LINUX_CFE_API_H_ */ diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h new file mode 100644 index 0000000000..3a6e00a2ae --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6338_intr.h @@ -0,0 +1,64 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6338_INTR_H +#define __6338_INTR_H + +/*=====================================================================*/ +/* BCM6338 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6338 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 6) +#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 7) +#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) +#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 10) +#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 11) +#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 12) +#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 13) +#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) +#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) +#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) +#define INTERRUPT_ID_SDIO (INTERNAL_ISR_TABLE_OFFSET + 17) + +#endif /* __BCM6338_H */ + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h new file mode 100644 index 0000000000..70bf807342 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6338_map_part.h @@ -0,0 +1,334 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6338_MAP_H +#define __BCM6338_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define SPI_BASE 0xfffe0c00 + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define USBS_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 + +#define SPI_CLK_EN 0x0200 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) +} PerfControl; + +#define PERF ((volatile PerfControl * const) PERF_BASE) + + +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define LOOPBK 0x10 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + + byte config; +#define XMITBREAK 0x40 +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + /* 4-LSBS represent STOP bits/char + * in 1/8 bit-time intervals. Zero + * represents 1/8 stop bit interval. + * Fifteen represents 2 stop bits. + */ + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + /* 5-bit TimeoutCnt is in low bits of this register. + * This count represents the number of characters + * idle times before setting receive Irq when below threshold + */ + uint32 baudword; + /* When divide SysClk/2/(1+baudword) we should get 32*bit-rate + */ + + byte txf_levl; /* Read-only fifo depth */ + byte rxf_levl; /* Read-only fifo depth */ + byte fifocfg; /* Upper 4-bits are TxThresh, Lower are + * RxThreshold. Irq can be asserted + * when rx fifo> thresh, txfifo +*/ + +#ifndef __6345_INTR_H +#define __6345_INTR_H + + +/*=====================================================================*/ +/* BCM6345 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6345 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 +#define DMA_ISR_TABLE_OFFSET (INTERNAL_ISR_TABLE_OFFSET + 13) + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +/* Internal peripheral interrupt IDs */ +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 3) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_USB (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_EMAC (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 12) + +/* DMA channel interrupt IDs */ +#define INTERRUPT_ID_EMAC_RX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_RX_CHAN) +#define INTERRUPT_ID_EMAC_TX_CHAN (DMA_ISR_TABLE_OFFSET + EMAC_TX_CHAN) +#define INTERRUPT_ID_EBI_RX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_RX_CHAN) +#define INTERRUPT_ID_EBI_TX_CHAN (DMA_ISR_TABLE_OFFSET + EBI_TX_CHAN) +#define INTERRUPT_ID_RESERVED_RX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_RX_CHAN) +#define INTERRUPT_ID_RESERVED_TX_CHAN (DMA_ISR_TABLE_OFFSET + RESERVED_TX_CHAN) +#define INTERRUPT_ID_USB_BULK_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_RX_CHAN) +#define INTERRUPT_ID_USB_BULK_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_BULK_TX_CHAN) +#define INTERRUPT_ID_USB_CNTL_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_RX_CHAN) +#define INTERRUPT_ID_USB_CNTL_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_CNTL_TX_CHAN) +#define INTERRUPT_ID_USB_ISO_RX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_RX_CHAN) +#define INTERRUPT_ID_USB_ISO_TX_CHAN (DMA_ISR_TABLE_OFFSET + USB_ISO_TX_CHAN) + + +#endif /* __BCM6345_H */ + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h new file mode 100644 index 0000000000..78e59a4399 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6345_map_part.h @@ -0,0 +1,163 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6345_MAP_H +#define __BCM6345_MAP_H + + +#include "bcmtypes.h" +#include "6345_intr.h" + +typedef struct IntControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define USB_CLK_EN 0x0100 +#define EMAC_CLK_EN 0x0080 +#define UART_CLK_EN 0x0008 +#define CPU_CLK_EN 0x0001 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 4 +#define EI_CLEAR_SHFT 8 +#define EI_MASK_SHFT 12 +#define EI_INSENS_SHFT 16 +#define EI_LEVEL_SHFT 20 +} IntControl; + +#define INTC_BASE 0xfffe0000 +#define PERF ((volatile IntControl * const) INTC_BASE) + +#define TIMR_BASE 0xfffe0200 +typedef struct Timer { + uint16 unused0; + byte TimerMask; +#define TIMER0EN 0x01 +#define TIMER1EN 0x02 +#define TIMER2EN 0x04 + byte TimerInts; +#define TIMER0 0x01 +#define TIMER1 0x02 +#define TIMER2 0x04 +#define WATCHDOG 0x08 + uint32 TimerCtl0; + uint32 TimerCtl1; + uint32 TimerCtl2; +#define TIMERENABLE 0x80000000 +#define RSTCNTCLR 0x40000000 + uint32 TimerCnt0; + uint32 TimerCnt1; + uint32 TimerCnt2; + uint32 WatchDogDefCount; + + /* Write 0xff00 0x00ff to Start timer + * Write 0xee00 0x00ee to Stop and re-load default count + * Read from this register returns current watch dog count + */ + uint32 WatchDogCtl; + + /* Number of 40-MHz ticks for WD Reset pulse to last */ + uint32 WDResetCount; +} Timer; + +#define TIMER ((volatile Timer * const) TIMR_BASE) + +typedef struct UartChannel { + byte unused0; + byte control; +#define BRGEN 0x80 /* Control register bit defs */ +#define TXEN 0x40 +#define RXEN 0x20 +#define TXPARITYEN 0x08 +#define TXPARITYEVEN 0x04 +#define RXPARITYEN 0x02 +#define RXPARITYEVEN 0x01 + byte config; +#define BITS5SYM 0x00 +#define BITS6SYM 0x10 +#define BITS7SYM 0x20 +#define BITS8SYM 0x30 +#define XMITBREAK 0x40 +#define ONESTOP 0x07 +#define TWOSTOP 0x0f + + byte fifoctl; +#define RSTTXFIFOS 0x80 +#define RSTRXFIFOS 0x40 + uint32 baudword; + + byte txf_levl; + byte rxf_levl; + byte fifocfg; + byte prog_out; + + byte unused1; + byte DeltaIPEdgeNoSense; + byte DeltaIPConfig_Mask; + byte DeltaIP_SyncIP; + uint16 intMask; + uint16 intStatus; +#define TXUNDERR 0x0002 +#define TXOVFERR 0x0004 +#define TXFIFOEMT 0x0020 +#define RXOVFERR 0x0080 +#define RXFIFONE 0x0800 +#define RXFRAMERR 0x1000 +#define RXPARERR 0x2000 +#define RXBRK 0x4000 + + uint16 unused2; + uint16 Data; + uint32 unused3; + uint32 unused4; +} Uart; + +#define UART_BASE 0xfffe0300 +#define UART ((volatile Uart * const) UART_BASE) + +typedef struct GpioControl { + uint16 unused0; + byte unused1; + byte TBusSel; + + uint16 unused2; + uint16 GPIODir; + byte unused3; + byte Leds; + uint16 GPIOio; + + uint32 UartCtl; +} GpioControl; + +#define GPIO_BASE 0xfffe0400 +#define GPIO ((volatile GpioControl * const) GPIO_BASE) + +#define GPIO_NUM_MAX_BITS_MASK 0x0f +#define GPIO_NUM_TO_MASK(X) (1 << ((X) & GPIO_NUM_MAX_BITS_MASK)) + + +#endif + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h new file mode 100644 index 0000000000..da3ee9fc34 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6348_intr.h @@ -0,0 +1,74 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __6348_INTR_H +#define __6348_INTR_H + + +/*=====================================================================*/ +/* BCM6348 External Interrupt Level Assignments */ +/*=====================================================================*/ +#define INTERRUPT_ID_EXTERNAL_0 3 +#define INTERRUPT_ID_EXTERNAL_1 4 +#define INTERRUPT_ID_EXTERNAL_2 5 +#define INTERRUPT_ID_EXTERNAL_3 6 + +/*=====================================================================*/ +/* BCM6348 Timer Interrupt Level Assignments */ +/*=====================================================================*/ +#define MIPS_TIMER_INT 7 + +/*=====================================================================*/ +/* Peripheral ISR Table Offset */ +/*=====================================================================*/ +#define INTERNAL_ISR_TABLE_OFFSET 8 + +/*=====================================================================*/ +/* Logical Peripheral Interrupt IDs */ +/*=====================================================================*/ + +#define INTERRUPT_ID_TIMER (INTERNAL_ISR_TABLE_OFFSET + 0) +#define INTERRUPT_ID_SPI (INTERNAL_ISR_TABLE_OFFSET + 1) +#define INTERRUPT_ID_UART (INTERNAL_ISR_TABLE_OFFSET + 2) +#define INTERRUPT_ID_ADSL (INTERNAL_ISR_TABLE_OFFSET + 4) +#define INTERRUPT_ID_ATM (INTERNAL_ISR_TABLE_OFFSET + 5) +#define INTERRUPT_ID_USBS (INTERNAL_ISR_TABLE_OFFSET + 6) +#define INTERRUPT_ID_EMAC2 (INTERNAL_ISR_TABLE_OFFSET + 7) +#define INTERRUPT_ID_EMAC1 (INTERNAL_ISR_TABLE_OFFSET + 8) +#define INTERRUPT_ID_EPHY (INTERNAL_ISR_TABLE_OFFSET + 9) +#define INTERRUPT_ID_M2M (INTERNAL_ISR_TABLE_OFFSET + 10) +#define INTERRUPT_ID_ACLC (INTERNAL_ISR_TABLE_OFFSET + 11) +#define INTERRUPT_ID_USBH (INTERNAL_ISR_TABLE_OFFSET + 12) +#define INTERRUPT_ID_SDRAM (INTERNAL_ISR_TABLE_OFFSET + 13) +#define INTERRUPT_ID_USB_CNTL_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 14) +#define INTERRUPT_ID_USB_CNTL_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 15) +#define INTERRUPT_ID_USB_BULK_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 16) +#define INTERRUPT_ID_USB_BULK_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 17) +#define INTERRUPT_ID_USB_ISO_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 18) +#define INTERRUPT_ID_USB_ISO_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 19) +#define INTERRUPT_ID_EMAC1_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 20) +#define INTERRUPT_ID_EMAC1_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 21) +#define INTERRUPT_ID_EMAC2_RX_DMA (INTERNAL_ISR_TABLE_OFFSET + 22) +#define INTERRUPT_ID_EMAC2_TX_DMA (INTERNAL_ISR_TABLE_OFFSET + 23) +#define INTERRUPT_ID_MPI (INTERNAL_ISR_TABLE_OFFSET + 24) +#define INTERRUPT_ID_DG (INTERNAL_ISR_TABLE_OFFSET + 25) + + +#endif /* __BCM6348_H */ + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h new file mode 100644 index 0000000000..199ef9e15e --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/6348_map_part.h @@ -0,0 +1,500 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM6348_MAP_H +#define __BCM6348_MAP_H + +#include "bcmtypes.h" + +#define PERF_BASE 0xfffe0000 +#define TIMR_BASE 0xfffe0200 +#define UART_BASE 0xfffe0300 +#define GPIO_BASE 0xfffe0400 +#define MPI_BASE 0xfffe2000 /* MPI control registers */ +#define USB_HOST_BASE 0xfffe1b00 /* USB host registers */ +#define USB_HOST_NON_OHCI 0xfffe1c00 /* USB host non-OHCI registers */ + +typedef struct PerfControl { + uint32 RevID; + uint16 testControl; + uint16 blkEnables; +#define EMAC_CLK_EN 0x0010 +#define SAR_CLK_EN 0x0020 +#define USBS_CLK_EN 0x0040 +#define USBH_CLK_EN 0x0100 + + uint32 pll_control; +#define SOFT_RESET 0x00000001 + + uint32 IrqMask; + uint32 IrqStatus; + + uint32 ExtIrqCfg; +#define EI_SENSE_SHFT 0 +#define EI_STATUS_SHFT 5 +#define EI_CLEAR_SHFT 10 +#define EI_MASK_SHFT 15 +#define EI_INSENS_SHFT 20 +#define EI_LEVEL_SHFT 25 + + uint32 unused[4]; /* (18) */ + uint32 BlockSoftReset; /* (28) */ +#define BSR_SPI 0x00000001 +#define BSR_EMAC 0x00000004 +#define BSR_USBH 0x00000008 +#define BSR_USBS 0x00000010 +#define BSR_ADSL 0x00000020 +#define BSR_DMAMEM 0x00000040 +#define BSR_SAR 0x00000080 +#define BSR_ACLC 0x00000100 +#define BSR_ADSL_MIPS_PLL 0x00000400 +#define BSR_ALL_BLOCKS \ + (BSR_SPI | BSR_EMAC | BSR_USBH | BSR_USBS | BSR_ADSL | BSR_DMAMEM | \ + BSR_SAR | BSR_ACLC | BSR_ADSL_MIPS_PLL) + uint32 unused2[2]; /* (2c) */ + uint32 PllStrap; /* (34) */ +#define PLL_N1_SHFT 20 +#define PLL_N1_MASK (7< thresh, txfifo= 32) ? (1 << ((X-32) & GPIO_NUM_MAX_BITS_MASK_HIGH)) : (0) ) + + +/* +** External Bus Interface +*/ +typedef struct EbiChipSelect { + uint32 base; /* base address in upper 24 bits */ +#define EBI_SIZE_8K 0 +#define EBI_SIZE_16K 1 +#define EBI_SIZE_32K 2 +#define EBI_SIZE_64K 3 +#define EBI_SIZE_128K 4 +#define EBI_SIZE_256K 5 +#define EBI_SIZE_512K 6 +#define EBI_SIZE_1M 7 +#define EBI_SIZE_2M 8 +#define EBI_SIZE_4M 9 +#define EBI_SIZE_8M 10 +#define EBI_SIZE_16M 11 +#define EBI_SIZE_32M 12 +#define EBI_SIZE_64M 13 +#define EBI_SIZE_128M 14 +#define EBI_SIZE_256M 15 + uint32 config; +#define EBI_ENABLE 0x00000001 /* .. enable this range */ +#define EBI_WAIT_STATES 0x0000000e /* .. mask for wait states */ +#define EBI_WTST_SHIFT 1 /* .. for shifting wait states */ +#define EBI_WORD_WIDE 0x00000010 /* .. 16-bit peripheral, else 8 */ +#define EBI_WREN 0x00000020 /* enable posted writes */ +#define EBI_POLARITY 0x00000040 /* .. set to invert something, + ** don't know what yet */ +#define EBI_TS_TA_MODE 0x00000080 /* .. use TS/TA mode */ +#define EBI_TS_SEL 0x00000100 /* .. drive tsize, not bs_b */ +#define EBI_FIFO 0x00000200 /* .. use fifo */ +#define EBI_RE 0x00000400 /* .. Reverse Endian */ +} EbiChipSelect; + +typedef struct MpiRegisters { + EbiChipSelect cs[7]; /* size chip select configuration */ +#define EBI_CS0_BASE 0 +#define EBI_CS1_BASE 1 +#define EBI_CS2_BASE 2 +#define EBI_CS3_BASE 3 +#define PCMCIA_COMMON_BASE 4 +#define PCMCIA_ATTRIBUTE_BASE 5 +#define PCMCIA_IO_BASE 6 + uint32 unused0[2]; /* reserved */ + uint32 ebi_control; /* ebi control */ + uint32 unused1[4]; /* reserved */ +#define EBI_ACCESS_TIMEOUT 0x000007FF + uint32 pcmcia_cntl1; /* pcmcia control 1 */ +#define PCCARD_CARD_RESET 0x00040000 +#define CARDBUS_ENABLE 0x00008000 +#define PCMCIA_ENABLE 0x00004000 +#define PCMCIA_GPIO_ENABLE 0x00002000 +#define CARDBUS_IDSEL 0x00001F00 +#define VS2_OEN 0x00000080 +#define VS1_OEN 0x00000040 +#define VS2_OUT 0x00000020 +#define VS1_OUT 0x00000010 +#define VS2_IN 0x00000008 +#define VS1_IN 0x00000004 +#define CD2_IN 0x00000002 +#define CD1_IN 0x00000001 +#define VS_MASK 0x0000000C +#define CD_MASK 0x00000003 + uint32 unused2; /* reserved */ + uint32 pcmcia_cntl2; /* pcmcia control 2 */ +#define PCMCIA_BYTESWAP_DIS 0x00000002 +#define PCMCIA_HALFWORD_EN 0x00000001 +#define RW_ACTIVE_CNT_BIT 2 +#define INACTIVE_CNT_BIT 8 +#define CE_SETUP_CNT_BIT 16 +#define CE_HOLD_CNT_BIT 24 + uint32 unused3[40]; /* reserved */ + + uint32 sp0range; /* PCI to internal system bus address space */ + uint32 sp0remap; + uint32 sp0cfg; + uint32 sp1range; + uint32 sp1remap; + uint32 sp1cfg; + + uint32 EndianCfg; + + uint32 l2pcfgctl; /* internal system bus to PCI IO/Cfg control */ +#define DIR_CFG_SEL 0x80000000 /* change from PCI I/O access to PCI config access */ +#define DIR_CFG_USEREG 0x40000000 /* use this register info for PCI configuration access */ +#define DEVICE_NUMBER 0x00007C00 /* device number for the PCI configuration access */ +#define FUNC_NUMBER 0x00000300 /* function number for the PCI configuration access */ +#define REG_NUMBER 0x000000FC /* register number for the PCI configuration access */ +#define CONFIG_TYPE 0x00000003 /* configuration type for the PCI configuration access */ + + uint32 l2pmrange1; /* internal system bus to PCI memory space */ +#define PCI_SIZE_64K 0xFFFF0000 +#define PCI_SIZE_128K 0xFFFE0000 +#define PCI_SIZE_256K 0xFFFC0000 +#define PCI_SIZE_512K 0xFFF80000 +#define PCI_SIZE_1M 0xFFF00000 +#define PCI_SIZE_2M 0xFFE00000 +#define PCI_SIZE_4M 0xFFC00000 +#define PCI_SIZE_8M 0xFF800000 +#define PCI_SIZE_16M 0xFF000000 +#define PCI_SIZE_32M 0xFE000000 + uint32 l2pmbase1; /* kseg0 or kseg1 address & 0x1FFFFFFF */ + uint32 l2pmremap1; +#define CARDBUS_MEM 0x00000004 +#define MEM_WINDOW_EN 0x00000001 + uint32 l2pmrange2; + uint32 l2pmbase2; + uint32 l2pmremap2; + uint32 l2piorange; /* internal system bus to PCI I/O space */ + uint32 l2piobase; + uint32 l2pioremap; + + uint32 pcimodesel; +#define PCI2_INT_BUS_RD_PREFECH 0x000000F0 +#define PCI_BAR2_NOSWAP 0x00000002 /* BAR at offset 0x20 */ +#define PCI_BAR1_NOSWAP 0x00000001 /* BAR at affset 0x1c */ + + uint32 pciintstat; /* PCI interrupt mask/status */ +#define MAILBOX1_SENT 0x08 +#define MAILBOX0_SENT 0x04 +#define MAILBOX1_MSG_RCV 0x02 +#define MAILBOX0_MSG_RCV 0x01 + uint32 locbuscntrl; /* internal system bus control */ +#define DIR_U2P_NOSWAP 0x00000002 +#define EN_PCI_GPIO 0x00000001 + uint32 locintstat; /* internal system bus interrupt mask/status */ +#define CSERR 0x0200 +#define SERR 0x0100 +#define EXT_PCI_INT 0x0080 +#define DIR_FAILED 0x0040 +#define DIR_COMPLETE 0x0020 +#define PCI_CFG 0x0010 + uint32 unused5[7]; + + uint32 mailbox0; + uint32 mailbox1; + + uint32 pcicfgcntrl; /* internal system bus PCI configuration control */ +#define PCI_CFG_REG_WRITE_EN 0x00000080 +#define PCI_CFG_ADDR 0x0000003C + uint32 pcicfgdata; /* internal system bus PCI configuration data */ + + uint32 locch2ctl; /* PCI to interrnal system bus DMA (downstream) local control */ +#define MPI_DMA_HALT 0x00000008 /* idle after finish current memory burst */ +#define MPI_DMA_PKT_HALT 0x00000004 /* idle after an EOP flag is detected */ +#define MPI_DMA_STALL 0x00000002 /* idle after an EOP flag is detected */ +#define MPI_DMA_ENABLE 0x00000001 /* set to enable channel */ + uint32 locch2intStat; +#define MPI_DMA_NO_DESC 0x00000004 /* no valid descriptors */ +#define MPI_DMA_DONE 0x00000002 /* packet xfer complete */ +#define MPI_DMA_BUFF_DONE 0x00000001 /* buffer done */ + uint32 locch2intMask; + uint32 unused6; + uint32 locch2descaddr; + uint32 locch2status1; +#define LOCAL_DESC_STATE 0xE0000000 +#define PCI_DESC_STATE 0x1C000000 +#define BYTE_DONE 0x03FFC000 +#define RING_ADDR 0x00003FFF + uint32 locch2status2; +#define BUFPTR_OFFSET 0x1FFF0000 +#define PCI_MASTER_STATE 0x000000C0 +#define LOC_MASTER_STATE 0x00000038 +#define CONTROL_STATE 0x00000007 + uint32 unused7; + + uint32 locch1Ctl; /*internal system bus to PCI DMA (upstream) local control */ +#define DMA_U2P_LE 0x00000200 /* local bus is little endian */ +#define DMA_U2P_NOSWAP 0x00000100 /* lccal bus is little endian but no data swapped */ + uint32 locch1intstat; + uint32 locch1intmask; + uint32 unused8; + uint32 locch1descaddr; + uint32 locch1status1; + uint32 locch1status2; + uint32 unused9; + + uint32 pcich1ctl; /* internal system bus to PCI DMA PCI control */ + uint32 pcich1intstat; + uint32 pcich1intmask; + uint32 pcich1descaddr; + uint32 pcich1status1; + uint32 pcich1status2; + + uint32 pcich2Ctl; /* PCI to internal system bus DMA PCI control */ + uint32 pcich2intstat; + uint32 pcich2intmask; + uint32 pcich2descaddr; + uint32 pcich2status1; + uint32 pcich2status2; + + uint32 perm_id; /* permanent device and vendor id */ + uint32 perm_rev; /* permanent revision id */ +} MpiRegisters; + +#define MPI ((volatile MpiRegisters * const) MPI_BASE) + +/* PCI configuration address space start offset 0x40 */ +#define BRCM_PCI_CONFIG_TIMER 0x40 +#define BRCM_PCI_CONFIG_TIMER_RETRY_MASK 0x0000FF00 +#define BRCM_PCI_CONFIG_TIMER_TRDY_MASK 0x000000FF + +/* USB host non-Open HCI register, USB_HOST_NON_OHCI, bit definitions. */ +#define NON_OHCI_ENABLE_PORT1 0x00000001 /* Use USB port 1 for host, not dev */ +#define NON_OHCI_BYTE_SWAP 0x00000008 /* Swap USB host registers */ + +#define USBH_NON_OHCI ((volatile unsigned long * const) USB_HOST_NON_OHCI) + +#endif + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h new file mode 100644 index 0000000000..e902e96aa3 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmTag.h @@ -0,0 +1,153 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +//************************************************************************************** +// File Name : bcmTag.h +// +// Description: add tag with validation system to the firmware image file to be uploaded +// via http +// +// Created : 02/28/2002 seanl +//************************************************************************************** + +#ifndef _BCMTAG_H_ +#define _BCMTAG_H_ + + +#define BCM_SIG_1 "Broadcom Corporation" +#define BCM_SIG_2 "ver. 2.0" // was "firmware version 2.0" now it is split 6 char out for chip id. + +#define BCM_TAG_VER "6" +#define BCM_TAG_VER_LAST "26" + +// file tag (head) structure all is in clear text except validationTokens (crc, md5, sha1, etc). Total: 128 unsigned chars +#define TAG_LEN 256 +#define TAG_VER_LEN 4 +#define SIG_LEN 20 +#define SIG_LEN_2 14 // Original second SIG = 20 is now devided into 14 for SIG_LEN_2 and 6 for CHIP_ID +#define CHIP_ID_LEN 6 +#define IMAGE_LEN 10 +#define ADDRESS_LEN 12 +#define FLAG_LEN 2 +#define TOKEN_LEN 20 +#define BOARD_ID_LEN 16 +#define RESERVED_LEN (TAG_LEN - TAG_VER_LEN - SIG_LEN - SIG_LEN_2 - CHIP_ID_LEN - BOARD_ID_LEN - \ + (4*IMAGE_LEN) - (3*ADDRESS_LEN) - (3*FLAG_LEN) - (2*TOKEN_LEN)) + + +// TAG for downloadable image (kernel plus file system) +typedef struct _FILE_TAG +{ + unsigned char tagVersion[TAG_VER_LEN]; // tag version. Will be 2 here. + unsigned char signiture_1[SIG_LEN]; // text line for company info + unsigned char signiture_2[SIG_LEN_2]; // additional info (can be version number) + unsigned char chipId[CHIP_ID_LEN]; // chip id + unsigned char boardId[BOARD_ID_LEN]; // board id + unsigned char bigEndian[FLAG_LEN]; // if = 1 - big, = 0 - little endia of the host + unsigned char totalImageLen[IMAGE_LEN]; // the sum of all the following length + unsigned char cfeAddress[ADDRESS_LEN]; // if non zero, cfe starting address + unsigned char cfeLen[IMAGE_LEN]; // if non zero, cfe size in clear ASCII text. + unsigned char rootfsAddress[ADDRESS_LEN]; // if non zero, filesystem starting address + unsigned char rootfsLen[IMAGE_LEN]; // if non zero, filesystem size in clear ASCII text. + unsigned char kernelAddress[ADDRESS_LEN]; // if non zero, kernel starting address + unsigned char kernelLen[IMAGE_LEN]; // if non zero, kernel size in clear ASCII text. + unsigned char dualImage[FLAG_LEN]; // if 1, dual image + unsigned char inactiveLen[FLAG_LEN]; // if 1, the image is INACTIVE; if 0, active + unsigned char reserved[RESERVED_LEN]; // reserved for later use + unsigned char imageValidationToken[TOKEN_LEN];// image validation token - can be crc, md5, sha; for + // now will be 4 unsigned char crc + unsigned char tagValidationToken[TOKEN_LEN]; // validation token for tag(from signiture_1 to end of // mageValidationToken) +} FILE_TAG, *PFILE_TAG; + +#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */ +#define CRC_LEN 4 + +// only included if for bcmTag.exe program +#ifdef BCMTAG_EXE_USE + +static unsigned long Crc32_table[256] = { + 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; +#endif // BCMTAG_USE + + +#endif // _BCMTAG_H_ + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h new file mode 100644 index 0000000000..8c56840f42 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcm_intr.h @@ -0,0 +1,59 @@ +/* +<:copyright-gpl + Copyright 2003 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM_INTR_H +#define __BCM_INTR_H + +#ifdef __cplusplus + extern "C" { +#endif + +#if defined(CONFIG_BCM96338) +#include <6338_intr.h> +#endif +#if defined(CONFIG_BCM96345) +#include <6345_intr.h> +#endif +#if defined(CONFIG_BCM96348) +#include <6348_intr.h> +#endif + +/* defines */ +struct pt_regs; +typedef int (*FN_HANDLER) (int, void *); + +/* prototypes */ +extern void enable_brcm_irq(unsigned int irq); +extern void disable_brcm_irq(unsigned int irq); +extern int request_external_irq(unsigned int irq, + FN_HANDLER handler, unsigned long irqflags, + const char * devname, void *dev_id); +extern unsigned int BcmHalMapInterrupt(FN_HANDLER isr, unsigned int param, + unsigned int interruptId); +extern void dump_intr_regs(void); + +/* compatibility definitions */ +#define BcmHalInterruptEnable(irq) enable_brcm_irq( irq ) +#define BcmHalInterruptDisable(irq) disable_brcm_irq( irq ) + +#ifdef __cplusplus + } +#endif + +#endif diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h new file mode 100644 index 0000000000..ccfe965dc3 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcm_map_part.h @@ -0,0 +1,34 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +#ifndef __BCM_MAP_PART_H +#define __BCM_MAP_PART_H + +#if defined(CONFIG_BCM96338) +#include <6338_map_part.h> +#endif +#if defined(CONFIG_BCM96345) +#include <6345_map_part.h> +#endif +#if defined(CONFIG_BCM96348) +#include <6348_map_part.h> +#endif + +#endif + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h new file mode 100644 index 0000000000..cecbd995a4 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmpci.h @@ -0,0 +1,87 @@ +/* +<:copyright-gpl + Copyright 2004 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +// +// bcmpci.h - bcm96348 PCI, Cardbus, and PCMCIA definition +// +#ifndef BCMPCI_H +#define BCMPCI_H + +/* Memory window in internal system bus address space */ +#define BCM_PCI_MEM_BASE 0x08000000 +/* IO window in internal system bus address space */ +#define BCM_PCI_IO_BASE 0x0C000000 + +#define BCM_PCI_ADDR_MASK 0x1fffffff + +/* Memory window size (range) */ +#define BCM_PCI_MEM_SIZE_16MB 0x01000000 +/* IO window size (range) */ +#define BCM_PCI_IO_SIZE_64KB 0x00010000 + +/* PCI Configuration and I/O space acesss */ +#define BCM_PCI_CFG(d, f, o) ( (d << 11) | (f << 8) | (o/4 << 2) ) + +/* fake USB PCI slot */ +#define USB_HOST_SLOT 9 +#define USB_BAR0_MEM_SIZE 0x0800 + +#define BCM_HOST_MEM_SPACE1 0x10000000 +#define BCM_HOST_MEM_SPACE2 0x00000000 + +/* + * EBI bus clock is 33MHz and share with PCI bus + * each clock cycle is 30ns. + */ +/* attribute memory access wait cnt for 4306 */ +#define PCMCIA_ATTR_CE_HOLD 3 // data hold time 70ns +#define PCMCIA_ATTR_CE_SETUP 3 // data setup time 50ns +#define PCMCIA_ATTR_INACTIVE 6 // time between read/write cycles 180ns. For the total cycle time 600ns (cnt1+cnt2+cnt3+cnt4) +#define PCMCIA_ATTR_ACTIVE 10 // OE/WE pulse width 300ns + +/* common memory access wait cnt for 4306 */ +#define PCMCIA_MEM_CE_HOLD 1 // data hold time 30ns +#define PCMCIA_MEM_CE_SETUP 1 // data setup time 30ns +#define PCMCIA_MEM_INACTIVE 2 // time between read/write cycles 40ns. For the total cycle time 250ns (cnt1+cnt2+cnt3+cnt4) +#define PCMCIA_MEM_ACTIVE 5 // OE/WE pulse width 150ns + +#define PCCARD_VCC_MASK 0x00070000 // Mask Reset also +#define PCCARD_VCC_33V 0x00010000 +#define PCCARD_VCC_50V 0x00020000 + +typedef enum { + MPI_CARDTYPE_NONE, // No Card in slot + MPI_CARDTYPE_PCMCIA, // 16-bit PCMCIA card in slot + MPI_CARDTYPE_CARDBUS, // 32-bit CardBus card in slot +} CardType; + +#define CARDBUS_SLOT 0 // Slot 0 is default for CardBus + +#define pcmciaAttrOffset 0x00200000 +#define pcmciaMemOffset 0x00000000 +// Needs to be right above PCI I/O space. Give 0x8000 (32K) to PCMCIA. +#define pcmciaIoOffset (BCM_PCI_IO_BASE + 0x80000) +// Base Address is that mapped into the MPI ChipSelect registers. +// UBUS bridge MemoryWindow 0 outputs a 0x00 for the base. +#define pcmciaBase 0xbf000000 +#define pcmciaAttr (pcmciaAttrOffset | pcmciaBase) +#define pcmciaMem (pcmciaMemOffset | pcmciaBase) +#define pcmciaIo (pcmciaIoOffset | pcmciaBase) + +#endif diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h new file mode 100644 index 0000000000..43aebc9c06 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bcmtypes.h @@ -0,0 +1,160 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ + +// +// bcmtypes.h - misc useful typedefs +// +#ifndef BCMTYPES_H +#define BCMTYPES_H + +// These are also defined in typedefs.h in the application area, so I need to +// protect against re-definition. + +#ifndef _TYPEDEFS_H_ +typedef unsigned char uint8; +typedef unsigned short uint16; +typedef unsigned long uint32; +typedef signed char int8; +typedef signed short int16; +typedef signed long int32; +#endif + +typedef unsigned char byte; +// typedef unsigned long sem_t; + +typedef unsigned long HANDLE,*PULONG,DWORD,*PDWORD; +typedef signed long LONG,*PLONG; + +typedef unsigned int *PUINT; +typedef signed int INT; + +typedef unsigned short *PUSHORT; +typedef signed short SHORT,*PSHORT; +typedef unsigned short WORD,*PWORD; + +typedef unsigned char *PUCHAR; +typedef signed char *PCHAR; + +typedef void *PVOID; + +typedef unsigned char BOOLEAN, *PBOOL, *PBOOLEAN; + +typedef unsigned char BYTE,*PBYTE; + +//#ifndef __GNUC__ +//The following has been defined in Vxworks internally: vxTypesOld.h +//redefine under vxworks will cause error +typedef signed int *PINT; + +typedef signed char INT8; +typedef signed short INT16; +typedef signed long INT32; + +typedef unsigned char UINT8; +typedef unsigned short UINT16; +typedef unsigned long UINT32; + +typedef unsigned char UCHAR; +typedef unsigned short USHORT; +typedef unsigned int UINT; +typedef unsigned long ULONG; + +typedef void VOID; +typedef unsigned char BOOL; + +//#endif /* __GNUC__ */ + + +// These are also defined in typedefs.h in the application area, so I need to +// protect against re-definition. +#ifndef TYPEDEFS_H + +// Maximum and minimum values for a signed 16 bit integer. +#define MAX_INT16 32767 +#define MIN_INT16 -32768 + +// Useful for true/false return values. This uses the +// Taligent notation (k for constant). +typedef enum +{ + kFalse = 0, + kTrue = 1 +} Bool; + +#endif + +/* macros to protect against unaligned accesses */ + +#if 0 +/* first arg is an address, second is a value */ +#define PUT16( a, d ) { \ + *((byte *)a) = (byte)((d)>>8); \ + *(((byte *)a)+1) = (byte)(d); \ +} + +#define PUT32( a, d ) { \ + *((byte *)a) = (byte)((d)>>24); \ + *(((byte *)a)+1) = (byte)((d)>>16); \ + *(((byte *)a)+2) = (byte)((d)>>8); \ + *(((byte *)a)+3) = (byte)(d); \ +} + +/* first arg is an address, returns a value */ +#define GET16( a ) ( \ + (*((byte *)a) << 8) | \ + (*(((byte *)a)+1)) \ +) + +#define GET32( a ) ( \ + (*((byte *)a) << 24) | \ + (*(((byte *)a)+1) << 16) | \ + (*(((byte *)a)+2) << 8) | \ + (*(((byte *)a)+3)) \ +) +#endif + +#ifndef YES +#define YES 1 +#endif + +#ifndef NO +#define NO 0 +#endif + +#ifndef IN +#define IN +#endif + +#ifndef OUT +#define OUT +#endif + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +#define READ32(addr) (*(volatile UINT32 *)((ULONG)&addr)) +#define READ16(addr) (*(volatile UINT16 *)((ULONG)&addr)) +#define READ8(addr) (*(volatile UINT8 *)((ULONG)&addr)) + +#endif diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/board.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/board.h new file mode 100644 index 0000000000..e674cb10d7 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/board.h @@ -0,0 +1,373 @@ +/* +<:copyright-gpl + Copyright 2002 Broadcom Corp. All Rights Reserved. + + This program is free software; you can distribute it and/or modify it + under the terms of the GNU General Public License (Version 2) as + published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +:> +*/ +/***********************************************************************/ +/* */ +/* MODULE: board.h */ +/* DATE: 97/02/18 */ +/* PURPOSE: Board specific information. This module should include */ +/* all base device addresses and board specific macros. */ +/* */ +/***********************************************************************/ +#ifndef _BOARD_H +#define _BOARD_H + +/*****************************************************************************/ +/* Misc board definitions */ +/*****************************************************************************/ + +#define DYING_GASP_API + +/*****************************************************************************/ +/* Physical Memory Map */ +/*****************************************************************************/ + +#define PHYS_DRAM_BASE 0x00000000 /* Dynamic RAM Base */ +#define PHYS_FLASH_BASE 0x1FC00000 /* Flash Memory */ + +/*****************************************************************************/ +/* Note that the addresses above are physical addresses and that programs */ +/* have to use converted addresses defined below: */ +/*****************************************************************************/ +#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ +#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ +#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ + +/*****************************************************************************/ +/* Select the PLL value to get the desired CPU clock frequency. */ +/* */ +/* */ +/*****************************************************************************/ +#define FPERIPH 50000000 + +#define ONEK 1024 +#define BLK64K (64*ONEK) +#define FLASH45_BLKS_BOOT_ROM 1 +#define FLASH45_LENGTH_BOOT_ROM (FLASH45_BLKS_BOOT_ROM * BLK64K) +#define FLASH_RESERVED_AT_END (64*ONEK) /*reserved for PSI, scratch pad*/ + +/*****************************************************************************/ +/* Note that the addresses above are physical addresses and that programs */ +/* have to use converted addresses defined below: */ +/*****************************************************************************/ +#define DRAM_BASE (0x80000000 | PHYS_DRAM_BASE) /* cached DRAM */ +#define DRAM_BASE_NOCACHE (0xA0000000 | PHYS_DRAM_BASE) /* uncached DRAM */ +#define FLASH_BASE (0xA0000000 | PHYS_FLASH_BASE) /* uncached Flash */ + +/*****************************************************************************/ +/* Select the PLL value to get the desired CPU clock frequency. */ +/* */ +/* */ +/*****************************************************************************/ +#define FPERIPH 50000000 + +#define SDRAM_TYPE_ADDRESS_OFFSET 16 +#define NVRAM_DATA_OFFSET 0x0580 +#define NVRAM_DATA_ID 0x0f1e2d3c +#define BOARD_SDRAM_TYPE *(unsigned long *) \ + (FLASH_BASE + SDRAM_TYPE_ADDRESS_OFFSET) + +#define ONEK 1024 +#define BLK64K (64*ONEK) + +// nvram and psi flash definitions for 45 +#define FLASH45_LENGTH_NVRAM ONEK // 1k nvram +#define NVRAM_PSI_DEFAULT 24 // default psi in K byes + +/*****************************************************************************/ +/* NVRAM Offset and definition */ +/*****************************************************************************/ + +#define NVRAM_VERSION_NUMBER 2 +#define NVRAM_VERSION_NUMBER_ADDRESS 0 + +#define NVRAM_BOOTLINE_LEN 256 +#define NVRAM_BOARD_ID_STRING_LEN 16 +#define NVRAM_MAC_ADDRESS_LEN 6 +#define NVRAM_MAC_COUNT_MAX 32 + +/*****************************************************************************/ +/* Misc Offsets */ +/*****************************************************************************/ + +#define CFE_VERSION_OFFSET 0x0570 +#define CFE_VERSION_MARK_SIZE 5 +#define CFE_VERSION_SIZE 5 + +typedef struct +{ + unsigned long ulVersion; + char szBootline[NVRAM_BOOTLINE_LEN]; + char szBoardId[NVRAM_BOARD_ID_STRING_LEN]; + unsigned long ulReserved1[2]; + unsigned long ulNumMacAddrs; + unsigned char ucaBaseMacAddr[NVRAM_MAC_ADDRESS_LEN]; + char chReserved[2]; + unsigned long ulCheckSum; +} NVRAM_DATA, *PNVRAM_DATA; + + +/*****************************************************************************/ +/* board ioctl calls for flash, led and some other utilities */ +/*****************************************************************************/ + + +/* Defines. for board driver */ +#define BOARD_IOCTL_MAGIC 'B' +#define BOARD_DRV_MAJOR 206 + +#define MAC_ADDRESS_ANY (unsigned long) -1 + +#define BOARD_IOCTL_FLASH_INIT \ + _IOWR(BOARD_IOCTL_MAGIC, 0, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_FLASH_WRITE \ + _IOWR(BOARD_IOCTL_MAGIC, 1, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_FLASH_READ \ + _IOWR(BOARD_IOCTL_MAGIC, 2, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_NR_PAGES \ + _IOWR(BOARD_IOCTL_MAGIC, 3, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_DUMP_ADDR \ + _IOWR(BOARD_IOCTL_MAGIC, 4, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_MEMORY \ + _IOWR(BOARD_IOCTL_MAGIC, 5, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_MIPS_SOFT_RESET \ + _IOWR(BOARD_IOCTL_MAGIC, 6, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_LED_CTRL \ + _IOWR(BOARD_IOCTL_MAGIC, 7, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_ID \ + _IOWR(BOARD_IOCTL_MAGIC, 8, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 9, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_RELEASE_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 10, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_PSI_SIZE \ + _IOWR(BOARD_IOCTL_MAGIC, 11, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_SDRAM_SIZE \ + _IOWR(BOARD_IOCTL_MAGIC, 12, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_MONITOR_FD \ + _IOWR(BOARD_IOCTL_MAGIC, 13, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_WAKEUP_MONITOR_TASK \ + _IOWR(BOARD_IOCTL_MAGIC, 14, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_BOOTLINE \ + _IOWR(BOARD_IOCTL_MAGIC, 15, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_BOOTLINE \ + _IOWR(BOARD_IOCTL_MAGIC, 16, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_BASE_MAC_ADDRESS \ + _IOWR(BOARD_IOCTL_MAGIC, 17, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_CHIP_ID \ + _IOWR(BOARD_IOCTL_MAGIC, 18, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_NUM_ENET \ + _IOWR(BOARD_IOCTL_MAGIC, 19, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_CFE_VER \ + _IOWR(BOARD_IOCTL_MAGIC, 20, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_ENET_CFG \ + _IOWR(BOARD_IOCTL_MAGIC, 21, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_WLAN_ANT_INUSE \ + _IOWR(BOARD_IOCTL_MAGIC, 22, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 23, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_GET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 24, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_UNSET_TRIGGER_EVENT \ + _IOWR(BOARD_IOCTL_MAGIC, 25, BOARD_IOCTL_PARMS) + +#define BOARD_IOCTL_SET_SES_LED \ + _IOWR(BOARD_IOCTL_MAGIC, 26, BOARD_IOCTL_PARMS) + +//<>JUNHON, 2004/09/15 + +// for the action in BOARD_IOCTL_PARMS for flash operation +typedef enum +{ + PERSISTENT, + NVRAM, + BCM_IMAGE_CFE, + BCM_IMAGE_FS, + BCM_IMAGE_KERNEL, + BCM_IMAGE_WHOLE, + SCRATCH_PAD, + FLASH_SIZE, +} BOARD_IOCTL_ACTION; + + +typedef struct boardIoctParms +{ + char *string; + char *buf; + int strLen; + int offset; + BOARD_IOCTL_ACTION action; /* flash read/write: nvram, persistent, bcm image */ + int result; +} BOARD_IOCTL_PARMS; + + +// LED defines +typedef enum +{ + kLedAdsl, + kLedWireless, + kLedUsb, + kLedHpna, + kLedWanData, + kLedPPP, + kLedVoip, + kLedSes, + kLedLan, + kLedSelfTest, + kLedEnd, // NOTE: Insert the new led name before this one. Alway stay at the end. +} BOARD_LED_NAME; + +typedef enum +{ + kLedStateOff, /* turn led off */ + kLedStateOn, /* turn led on */ + kLedStateFail, /* turn led on red */ + kLedStateBlinkOnce, /* blink once, ~100ms and ignore the same call during the 100ms period */ + kLedStateSlowBlinkContinues, /* slow blink continues at ~600ms interval */ + kLedStateFastBlinkContinues, /* fast blink continues at ~200ms interval */ +} BOARD_LED_STATE; + + +// virtual and physical map pair defined in board.c +typedef struct ledmappair +{ + BOARD_LED_NAME ledName; // virtual led name + BOARD_LED_STATE ledInitState; // initial led state when the board boots. + unsigned short ledMask; // physical GPIO pin mask + unsigned short ledActiveLow; // reset bit to turn on LED + unsigned short ledMaskFail; // physical GPIO pin mask for state failure + unsigned short ledActiveLowFail;// reset bit to turn on LED +} LED_MAP_PAIR, *PLED_MAP_PAIR; + +typedef void (*HANDLE_LED_FUNC)(BOARD_LED_NAME ledName, BOARD_LED_STATE ledState); + +/* Flash storage address information that is determined by the flash driver. */ +typedef struct flashaddrinfo +{ + int flash_persistent_start_blk; + int flash_persistent_number_blk; + int flash_persistent_length; + unsigned long flash_persistent_blk_offset; + int flash_scratch_pad_start_blk; // start before psi (SP_BUF_LEN) + int flash_scratch_pad_number_blk; + int flash_scratch_pad_length; + unsigned long flash_scratch_pad_blk_offset; + int flash_nvram_start_blk; + int flash_nvram_number_blk; + int flash_nvram_length; + unsigned long flash_nvram_blk_offset; +} FLASH_ADDR_INFO, *PFLASH_ADDR_INFO; + +// scratch pad defines +/* SP - Persisten Scratch Pad format: + sp header : 32 bytes + tokenId-1 : 8 bytes + tokenId-1 len : 4 bytes + tokenId-1 data + .... + tokenId-n : 8 bytes + tokenId-n len : 4 bytes + tokenId-n data +*/ + +#define MAGIC_NUM_LEN 8 +#define MAGIC_NUMBER "gOGoBrCm" +#define TOKEN_NAME_LEN 16 +#define SP_VERSION 1 +#define SP_MAX_LEN 8 * 1024 // 8k buf before psi +#define SP_RESERVERD 16 + +typedef struct _SP_HEADER +{ + char SPMagicNum[MAGIC_NUM_LEN]; // 8 bytes of magic number + int SPVersion; // version number + int SPUsedLen; // used sp len + char SPReserved[SP_RESERVERD]; // reservied, total 32 bytes +} SP_HEADER, *PSP_HEADER; + +typedef struct _TOKEN_DEF +{ + char tokenName[TOKEN_NAME_LEN]; + int tokenLen; +} SP_TOKEN, *PSP_TOKEN; + + +/*****************************************************************************/ +/* Function Prototypes */ +/*****************************************************************************/ +#if !defined(__ASM_ASM_H) +void dumpaddr( unsigned char *pAddr, int nLen ); + +int kerSysNvRamGet(char *string, int strLen, int offset); +int kerSysNvRamSet(char *string, int strLen, int offset); +int kerSysPersistentGet(char *string, int strLen, int offset); +int kerSysPersistentSet(char *string, int strLen, int offset); +int kerSysScratchPadGet(char *tokName, char *tokBuf, int tokLen); +int kerSysScratchPadSet(char *tokName, char *tokBuf, int tokLen); +int kerSysBcmImageSet( int flash_start_addr, char *string, int size); +int kerSysGetMacAddress( unsigned char *pucaAddr, unsigned long ulId ); +int kerSysReleaseMacAddress( unsigned char *pucaAddr ); +int kerSysGetSdramSize( void ); +void kerSysGetBootline(char *string, int strLen); +void kerSysSetBootline(char *string, int strLen); +void kerSysMipsSoftReset(void); +void kerSysLedCtrl(BOARD_LED_NAME, BOARD_LED_STATE); +void kerSysLedRegisterHwHandler( BOARD_LED_NAME, HANDLE_LED_FUNC, int ); +int kerSysFlashSizeGet(void); +void kerSysRegisterDyingGaspHandler(char *devname, void *cbfn, void *context); +void kerSysDeregisterDyingGaspHandler(char *devname); +void kerSysWakeupMonitorTask( void ); +#endif + +#define BOOT_CFE 0 +#define BOOT_REDBOOT 1 + +extern int boot_loader_type; + +#endif /* _BOARD_H */ + diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h new file mode 100644 index 0000000000..e169bb00c0 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/bootloaders.h @@ -0,0 +1,7 @@ +#define ADSL_SDRAM_IMAGE_SIZE (384*1024) + +#define BOOT_LOADER_UNKNOWN 0 +#define BOOT_LOADER_CFE 1 +#define BOOT_LOADER_REDBOOT 2 +#define BOOT_LOADER_CFE2 3 +#define BOOT_LOADER_LAST 3 diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h new file mode 100644 index 0000000000..ea9b3587ad --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/cpu-feature-overrides.h @@ -0,0 +1,36 @@ +#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H + +#define cpu_has_tlb 1 +#define cpu_has_4kex 4 +#define cpu_has_4ktlb 8 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 0x40 +#define cpu_has_watch 0 +#define cpu_has_mips16 0 +#define cpu_has_divec 0x200 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 0x40000 +#define cpu_has_mcheck 0x2000 +#define cpu_has_ejtag 0x4000 +#define cpu_has_llsc 0x10000 +#define cpu_has_vtag_icache 0 +#define cpu_has_dc_aliases 0 +#define cpu_has_ic_fills_f_dc 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 +#define cpu_has_64bit_gp_regs 0 +#define cpu_has_64bit_addresses 0 + +#define cpu_has_subset_pcaches 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 +#define cpu_scache_line_size() 0 + +#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/nvram.h b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/nvram.h new file mode 100644 index 0000000000..6bb18e8e5f --- /dev/null +++ b/target/linux/easygate-2.6/files/include/asm-mips/mach-bcm963xx/nvram.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2006 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __NVRAM_H +#define __NVRAM_H + +struct nvram_header { + u32 magic; + u32 len; + u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ + u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ + u32 config_ncdl; /* ncdl values for memc */ +}; + +struct nvram_tuple { + char *name; + char *value; + struct nvram_tuple *next; +}; + +#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */ +#define NVRAM_VERSION 1 +#define NVRAM_HEADER_SIZE 20 +#define NVRAM_SPACE 0x8000 + +#define NVRAM_MAX_VALUE_LEN 255 +#define NVRAM_MAX_PARAM_LEN 64 + +char *nvram_get(const char *name); + +#endif diff --git a/target/linux/easygate-2.6/files/include/linux/atmrt2684.h b/target/linux/easygate-2.6/files/include/linux/atmrt2684.h new file mode 100644 index 0000000000..f138c643a2 --- /dev/null +++ b/target/linux/easygate-2.6/files/include/linux/atmrt2684.h @@ -0,0 +1,48 @@ +#ifndef _LINUX_ATMRT2684_H +#define _LINUX_ATMRT2684_H + +#include +#include /* For IFNAMSIZ */ + +#define RT2684_ENCAPS_NULL (0) /* VC-mux */ +#define RT2684_ENCAPS_LLC (1) +#define RT2684_ENCAPS_AUTODETECT (2) /* Unsuported */ + +/* + * This is for the ATM_NEWBACKENDIF call - these are like socket families: + * the first element of the structure is the backend number and the rest + * is per-backend specific + */ +struct atm_newif_rt2684 { + atm_backend_t backend_num; /* ATM_BACKEND_RT2684 */ + char ifname[IFNAMSIZ]; +}; + +/* + * This structure is used to specify a rt2684 interface - either by a + * positive integer (returned by ATM_NEWBACKENDIF) or the interfaces name + */ +#define RT2684_FIND_BYNOTHING (0) +#define RT2684_FIND_BYNUM (1) +#define RT2684_FIND_BYIFNAME (2) +struct rt2684_if_spec { + int method; /* RT2684_FIND_* */ + union { + char ifname[IFNAMSIZ]; + int devnum; + } spec; +}; + +/* + * This is for the ATM_SETBACKEND call - these are like socket families: + * the first element of the structure is the backend number and the rest + * is per-backend specific + */ +struct atm_backend_rt2684 { + atm_backend_t backend_num; /* ATM_BACKEND_RT2684 */ + struct rt2684_if_spec ifspec; + unsigned char encaps; /* RT2684_ENCAPS_* */ +}; + + +#endif /* _LINUX_ATMRT2684_H */ diff --git a/target/linux/easygate-2.6/image/Makefile b/target/linux/easygate-2.6/image/Makefile new file mode 100644 index 0000000000..d930af8501 --- /dev/null +++ b/target/linux/easygate-2.6/image/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +LOADADDR = 0x8108c8f4 # RAM start + 16M +KERNEL_ENTRY = 0x80100000 # Default kernel entry in arch/mips/Makefile +RAMSIZE = 0x01000000 # 64MB + +LOADER_MAKEOPTS= \ + KDIR=$(KDIR) \ + LOADADDR=$(LOADADDR) \ + KERNEL_ENTRY=$(KERNEL_ENTRY) \ + RAMSIZE=$(RAMSIZE) + +define trxalign/jffs2-128k +-a 0x20000 +endef +define trxalign/jffs2-64k +-a 0x10000 +endef +define trxalign/squashfs +-a 1024 +endef + +define Build/Clean + $(MAKE) -C lzma-loader clean +endef + +define Image/Prepare + cat $(KDIR)/vmlinux | $(STAGING_DIR)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma + rm -f $(KDIR)/loader.gz + $(MAKE) -C lzma-loader \ + BUILD_DIR="$(KDIR)" \ + TARGET="$(KDIR)" \ + clean install + echo -ne "\\x00" >> $(KDIR)/loader.gz +endef + +define Image/Build + $(STAGING_DIR)/bin/trx -o $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma $(call trxalign/$(1)) -f $(KDIR)/root.$(1) +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/easygate-2.6/image/lzma-loader/Makefile b/target/linux/easygate-2.6/image/lzma-loader/Makefile new file mode 100644 index 0000000000..cb94891628 --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/Makefile @@ -0,0 +1,34 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +# $Id: Makefile 6896 2007-04-08 17:20:01Z florian $ + +include $(TOPDIR)/rules.mk + +PKG_NAME := lzma-loader +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) + +$(PKG_BUILD_DIR)/.prepared: + mkdir $(PKG_BUILD_DIR) + $(CP) ./src/* $(PKG_BUILD_DIR)/ + touch $@ + +$(PKG_BUILD_DIR)/loader.gz: $(PKG_BUILD_DIR)/.prepared + $(MAKE) -C $(PKG_BUILD_DIR) CC="$(TARGET_CC)" \ + LD="$(TARGET_CROSS)ld" CROSS_COMPILE="$(TARGET_CROSS)" + +download: +prepare: $(PKG_BUILD_DIR)/.prepared +compile: $(PKG_BUILD_DIR)/loader.gz +install: + +ifneq ($(TARGET),) +install: compile + $(CP) $(PKG_BUILD_DIR)/loader.gz $(PKG_BUILD_DIR)/loader.elf $(TARGET)/ +endif + +clean: + rm -rf $(PKG_BUILD_DIR) diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/LzmaDecode.c b/target/linux/easygate-2.6/image/lzma-loader/src/LzmaDecode.c new file mode 100644 index 0000000000..951700bddf --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/LzmaDecode.c @@ -0,0 +1,663 @@ +/* + LzmaDecode.c + LZMA Decoder + + LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#include "LzmaDecode.h" + +#ifndef Byte +#define Byte unsigned char +#endif + +#define kNumTopBits 24 +#define kTopValue ((UInt32)1 << kNumTopBits) + +#define kNumBitModelTotalBits 11 +#define kBitModelTotal (1 << kNumBitModelTotalBits) +#define kNumMoveBits 5 + +typedef struct _CRangeDecoder +{ + Byte *Buffer; + Byte *BufferLim; + UInt32 Range; + UInt32 Code; + #ifdef _LZMA_IN_CB + ILzmaInCallback *InCallback; + int Result; + #endif + int ExtraBytes; +} CRangeDecoder; + +Byte RangeDecoderReadByte(CRangeDecoder *rd) +{ + if (rd->Buffer == rd->BufferLim) + { + #ifdef _LZMA_IN_CB + UInt32 size; + rd->Result = rd->InCallback->Read(rd->InCallback, &rd->Buffer, &size); + rd->BufferLim = rd->Buffer + size; + if (size == 0) + #endif + { + rd->ExtraBytes = 1; + return 0xFF; + } + } + return (*rd->Buffer++); +} + +/* #define ReadByte (*rd->Buffer++) */ +#define ReadByte (RangeDecoderReadByte(rd)) + +void RangeDecoderInit(CRangeDecoder *rd, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + Byte *stream, UInt32 bufferSize + #endif + ) +{ + int i; + #ifdef _LZMA_IN_CB + rd->InCallback = inCallback; + rd->Buffer = rd->BufferLim = 0; + #else + rd->Buffer = stream; + rd->BufferLim = stream + bufferSize; + #endif + rd->ExtraBytes = 0; + rd->Code = 0; + rd->Range = (0xFFFFFFFF); + for(i = 0; i < 5; i++) + rd->Code = (rd->Code << 8) | ReadByte; +} + +#define RC_INIT_VAR UInt32 range = rd->Range; UInt32 code = rd->Code; +#define RC_FLUSH_VAR rd->Range = range; rd->Code = code; +#define RC_NORMALIZE if (range < kTopValue) { range <<= 8; code = (code << 8) | ReadByte; } + +UInt32 RangeDecoderDecodeDirectBits(CRangeDecoder *rd, int numTotalBits) +{ + RC_INIT_VAR + UInt32 result = 0; + int i; + for (i = numTotalBits; i > 0; i--) + { + /* UInt32 t; */ + range >>= 1; + + result <<= 1; + if (code >= range) + { + code -= range; + result |= 1; + } + /* + t = (code - range) >> 31; + t &= 1; + code -= range & (t - 1); + result = (result + result) | (1 - t); + */ + RC_NORMALIZE + } + RC_FLUSH_VAR + return result; +} + +int RangeDecoderBitDecode(CProb *prob, CRangeDecoder *rd) +{ + UInt32 bound = (rd->Range >> kNumBitModelTotalBits) * *prob; + if (rd->Code < bound) + { + rd->Range = bound; + *prob += (kBitModelTotal - *prob) >> kNumMoveBits; + if (rd->Range < kTopValue) + { + rd->Code = (rd->Code << 8) | ReadByte; + rd->Range <<= 8; + } + return 0; + } + else + { + rd->Range -= bound; + rd->Code -= bound; + *prob -= (*prob) >> kNumMoveBits; + if (rd->Range < kTopValue) + { + rd->Code = (rd->Code << 8) | ReadByte; + rd->Range <<= 8; + } + return 1; + } +} + +#define RC_GET_BIT2(prob, mi, A0, A1) \ + UInt32 bound = (range >> kNumBitModelTotalBits) * *prob; \ + if (code < bound) \ + { A0; range = bound; *prob += (kBitModelTotal - *prob) >> kNumMoveBits; mi <<= 1; } \ + else \ + { A1; range -= bound; code -= bound; *prob -= (*prob) >> kNumMoveBits; mi = (mi + mi) + 1; } \ + RC_NORMALIZE + +#define RC_GET_BIT(prob, mi) RC_GET_BIT2(prob, mi, ; , ;) + +int RangeDecoderBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) +{ + int mi = 1; + int i; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + for(i = numLevels; i > 0; i--) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + mi; + RC_GET_BIT(prob, mi) + #else + mi = (mi + mi) + RangeDecoderBitDecode(probs + mi, rd); + #endif + } + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return mi - (1 << numLevels); +} + +int RangeDecoderReverseBitTreeDecode(CProb *probs, int numLevels, CRangeDecoder *rd) +{ + int mi = 1; + int i; + int symbol = 0; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + for(i = 0; i < numLevels; i++) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + mi; + RC_GET_BIT2(prob, mi, ; , symbol |= (1 << i)) + #else + int bit = RangeDecoderBitDecode(probs + mi, rd); + mi = mi + mi + bit; + symbol |= (bit << i); + #endif + } + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +Byte LzmaLiteralDecode(CProb *probs, CRangeDecoder *rd) +{ + int symbol = 1; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + do + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + symbol; + RC_GET_BIT(prob, symbol) + #else + symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); + #endif + } + while (symbol < 0x100); + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +Byte LzmaLiteralDecodeMatch(CProb *probs, CRangeDecoder *rd, Byte matchByte) +{ + int symbol = 1; + #ifdef _LZMA_LOC_OPT + RC_INIT_VAR + #endif + do + { + int bit; + int matchBit = (matchByte >> 7) & 1; + matchByte <<= 1; + #ifdef _LZMA_LOC_OPT + { + CProb *prob = probs + ((1 + matchBit) << 8) + symbol; + RC_GET_BIT2(prob, symbol, bit = 0, bit = 1) + } + #else + bit = RangeDecoderBitDecode(probs + ((1 + matchBit) << 8) + symbol, rd); + symbol = (symbol << 1) | bit; + #endif + if (matchBit != bit) + { + while (symbol < 0x100) + { + #ifdef _LZMA_LOC_OPT + CProb *prob = probs + symbol; + RC_GET_BIT(prob, symbol) + #else + symbol = (symbol + symbol) | RangeDecoderBitDecode(probs + symbol, rd); + #endif + } + break; + } + } + while (symbol < 0x100); + #ifdef _LZMA_LOC_OPT + RC_FLUSH_VAR + #endif + return symbol; +} + +#define kNumPosBitsMax 4 +#define kNumPosStatesMax (1 << kNumPosBitsMax) + +#define kLenNumLowBits 3 +#define kLenNumLowSymbols (1 << kLenNumLowBits) +#define kLenNumMidBits 3 +#define kLenNumMidSymbols (1 << kLenNumMidBits) +#define kLenNumHighBits 8 +#define kLenNumHighSymbols (1 << kLenNumHighBits) + +#define LenChoice 0 +#define LenChoice2 (LenChoice + 1) +#define LenLow (LenChoice2 + 1) +#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits)) +#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits)) +#define kNumLenProbs (LenHigh + kLenNumHighSymbols) + +int LzmaLenDecode(CProb *p, CRangeDecoder *rd, int posState) +{ + if(RangeDecoderBitDecode(p + LenChoice, rd) == 0) + return RangeDecoderBitTreeDecode(p + LenLow + + (posState << kLenNumLowBits), kLenNumLowBits, rd); + if(RangeDecoderBitDecode(p + LenChoice2, rd) == 0) + return kLenNumLowSymbols + RangeDecoderBitTreeDecode(p + LenMid + + (posState << kLenNumMidBits), kLenNumMidBits, rd); + return kLenNumLowSymbols + kLenNumMidSymbols + + RangeDecoderBitTreeDecode(p + LenHigh, kLenNumHighBits, rd); +} + +#define kNumStates 12 + +#define kStartPosModelIndex 4 +#define kEndPosModelIndex 14 +#define kNumFullDistances (1 << (kEndPosModelIndex >> 1)) + +#define kNumPosSlotBits 6 +#define kNumLenToPosStates 4 + +#define kNumAlignBits 4 +#define kAlignTableSize (1 << kNumAlignBits) + +#define kMatchMinLen 2 + +#define IsMatch 0 +#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax)) +#define IsRepG0 (IsRep + kNumStates) +#define IsRepG1 (IsRepG0 + kNumStates) +#define IsRepG2 (IsRepG1 + kNumStates) +#define IsRep0Long (IsRepG2 + kNumStates) +#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax)) +#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits)) +#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex) +#define LenCoder (Align + kAlignTableSize) +#define RepLenCoder (LenCoder + kNumLenProbs) +#define Literal (RepLenCoder + kNumLenProbs) + +#if Literal != LZMA_BASE_SIZE +StopCompilingDueBUG +#endif + +#ifdef _LZMA_OUT_READ + +typedef struct _LzmaVarState +{ + CRangeDecoder RangeDecoder; + Byte *Dictionary; + UInt32 DictionarySize; + UInt32 DictionaryPos; + UInt32 GlobalPos; + UInt32 Reps[4]; + int lc; + int lp; + int pb; + int State; + int PreviousIsMatch; + int RemainLen; +} LzmaVarState; + +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif + ) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + UInt32 i; + if (bufferSize < numProbs * sizeof(CProb) + sizeof(LzmaVarState)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + vs->Dictionary = dictionary; + vs->DictionarySize = dictionarySize; + vs->DictionaryPos = 0; + vs->GlobalPos = 0; + vs->Reps[0] = vs->Reps[1] = vs->Reps[2] = vs->Reps[3] = 1; + vs->lc = lc; + vs->lp = lp; + vs->pb = pb; + vs->State = 0; + vs->PreviousIsMatch = 0; + vs->RemainLen = 0; + dictionary[dictionarySize - 1] = 0; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + RangeDecoderInit(&vs->RangeDecoder, + #ifdef _LZMA_IN_CB + inCallback + #else + inStream, inSize + #endif + ); + return LZMA_RESULT_OK; +} + +int LzmaDecode(unsigned char *buffer, + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + LzmaVarState *vs = (LzmaVarState *)buffer; + CProb *p = (CProb *)(buffer + sizeof(LzmaVarState)); + CRangeDecoder rd = vs->RangeDecoder; + int state = vs->State; + int previousIsMatch = vs->PreviousIsMatch; + Byte previousByte; + UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3]; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << (vs->pb)) - 1; + UInt32 literalPosMask = (1 << (vs->lp)) - 1; + int lc = vs->lc; + int len = vs->RemainLen; + UInt32 globalPos = vs->GlobalPos; + + Byte *dictionary = vs->Dictionary; + UInt32 dictionarySize = vs->DictionarySize; + UInt32 dictionaryPos = vs->DictionaryPos; + + if (len == -1) + { + *outSizeProcessed = 0; + return LZMA_RESULT_OK; + } + + while(len > 0 && nowPos < outSize) + { + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos]; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + len--; + } + if (dictionaryPos == 0) + previousByte = dictionary[dictionarySize - 1]; + else + previousByte = dictionary[dictionaryPos - 1]; +#else + +int LzmaDecode( + Byte *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed) +{ + UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + lp)); + CProb *p = (CProb *)buffer; + CRangeDecoder rd; + UInt32 i; + int state = 0; + int previousIsMatch = 0; + Byte previousByte = 0; + UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1; + UInt32 nowPos = 0; + UInt32 posStateMask = (1 << pb) - 1; + UInt32 literalPosMask = (1 << lp) - 1; + int len = 0; + if (bufferSize < numProbs * sizeof(CProb)) + return LZMA_RESULT_NOT_ENOUGH_MEM; + for (i = 0; i < numProbs; i++) + p[i] = kBitModelTotal >> 1; + RangeDecoderInit(&rd, + #ifdef _LZMA_IN_CB + inCallback + #else + inStream, inSize + #endif + ); +#endif + + *outSizeProcessed = 0; + while(nowPos < outSize) + { + int posState = (int)( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & posStateMask); + #ifdef _LZMA_IN_CB + if (rd.Result != LZMA_RESULT_OK) + return rd.Result; + #endif + if (rd.ExtraBytes != 0) + return LZMA_RESULT_DATA_ERROR; + if (RangeDecoderBitDecode(p + IsMatch + (state << kNumPosBitsMax) + posState, &rd) == 0) + { + CProb *probs = p + Literal + (LZMA_LIT_SIZE * + ((( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + & literalPosMask) << lc) + (previousByte >> (8 - lc)))); + + if (state < 4) state = 0; + else if (state < 10) state -= 3; + else state -= 6; + if (previousIsMatch) + { + Byte matchByte; + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + matchByte = dictionary[pos]; + #else + matchByte = outStream[nowPos - rep0]; + #endif + previousByte = LzmaLiteralDecodeMatch(probs, &rd, matchByte); + previousIsMatch = 0; + } + else + previousByte = LzmaLiteralDecode(probs, &rd); + outStream[nowPos++] = previousByte; + #ifdef _LZMA_OUT_READ + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #endif + } + else + { + previousIsMatch = 1; + if (RangeDecoderBitDecode(p + IsRep + state, &rd) == 1) + { + if (RangeDecoderBitDecode(p + IsRepG0 + state, &rd) == 0) + { + if (RangeDecoderBitDecode(p + IsRep0Long + (state << kNumPosBitsMax) + posState, &rd) == 0) + { + #ifdef _LZMA_OUT_READ + UInt32 pos; + #endif + if ( + (nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + == 0) + return LZMA_RESULT_DATA_ERROR; + state = state < 7 ? 9 : 11; + #ifdef _LZMA_OUT_READ + pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + continue; + } + } + else + { + UInt32 distance; + if(RangeDecoderBitDecode(p + IsRepG1 + state, &rd) == 0) + distance = rep1; + else + { + if(RangeDecoderBitDecode(p + IsRepG2 + state, &rd) == 0) + distance = rep2; + else + { + distance = rep3; + rep3 = rep2; + } + rep2 = rep1; + } + rep1 = rep0; + rep0 = distance; + } + len = LzmaLenDecode(p + RepLenCoder, &rd, posState); + state = state < 7 ? 8 : 11; + } + else + { + int posSlot; + rep3 = rep2; + rep2 = rep1; + rep1 = rep0; + state = state < 7 ? 7 : 10; + len = LzmaLenDecode(p + LenCoder, &rd, posState); + posSlot = RangeDecoderBitTreeDecode(p + PosSlot + + ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) << + kNumPosSlotBits), kNumPosSlotBits, &rd); + if (posSlot >= kStartPosModelIndex) + { + int numDirectBits = ((posSlot >> 1) - 1); + rep0 = ((2 | ((UInt32)posSlot & 1)) << numDirectBits); + if (posSlot < kEndPosModelIndex) + { + rep0 += RangeDecoderReverseBitTreeDecode( + p + SpecPos + rep0 - posSlot - 1, numDirectBits, &rd); + } + else + { + rep0 += RangeDecoderDecodeDirectBits(&rd, + numDirectBits - kNumAlignBits) << kNumAlignBits; + rep0 += RangeDecoderReverseBitTreeDecode(p + Align, kNumAlignBits, &rd); + } + } + else + rep0 = posSlot; + rep0++; + } + if (rep0 == (UInt32)(0)) + { + /* it's for stream version */ + len = -1; + break; + } + if (rep0 > nowPos + #ifdef _LZMA_OUT_READ + + globalPos + #endif + ) + { + return LZMA_RESULT_DATA_ERROR; + } + len += kMatchMinLen; + do + { + #ifdef _LZMA_OUT_READ + UInt32 pos = dictionaryPos - rep0; + if (pos >= dictionarySize) + pos += dictionarySize; + previousByte = dictionary[pos]; + dictionary[dictionaryPos] = previousByte; + if (++dictionaryPos == dictionarySize) + dictionaryPos = 0; + #else + previousByte = outStream[nowPos - rep0]; + #endif + outStream[nowPos++] = previousByte; + len--; + } + while(len > 0 && nowPos < outSize); + } + } + + #ifdef _LZMA_OUT_READ + vs->RangeDecoder = rd; + vs->DictionaryPos = dictionaryPos; + vs->GlobalPos = globalPos + nowPos; + vs->Reps[0] = rep0; + vs->Reps[1] = rep1; + vs->Reps[2] = rep2; + vs->Reps[3] = rep3; + vs->State = state; + vs->PreviousIsMatch = previousIsMatch; + vs->RemainLen = len; + #endif + + *outSizeProcessed = nowPos; + return LZMA_RESULT_OK; +} diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/LzmaDecode.h b/target/linux/easygate-2.6/image/lzma-loader/src/LzmaDecode.h new file mode 100644 index 0000000000..f58944e3c3 --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/LzmaDecode.h @@ -0,0 +1,100 @@ +/* + LzmaDecode.h + LZMA Decoder interface + + LZMA SDK 4.05 Copyright (c) 1999-2004 Igor Pavlov (2004-08-25) + http://www.7-zip.org/ + + LZMA SDK is licensed under two licenses: + 1) GNU Lesser General Public License (GNU LGPL) + 2) Common Public License (CPL) + It means that you can select one of these two licenses and + follow rules of that license. + + SPECIAL EXCEPTION: + Igor Pavlov, as the author of this code, expressly permits you to + statically or dynamically link your code (or bind by name) to the + interfaces of this file without subjecting your linked code to the + terms of the CPL or GNU LGPL. Any modifications or additions + to this file, however, are subject to the LGPL or CPL terms. +*/ + +#ifndef __LZMADECODE_H +#define __LZMADECODE_H + +/* #define _LZMA_IN_CB */ +/* Use callback for input data */ + +/* #define _LZMA_OUT_READ */ +/* Use read function for output data */ + +/* #define _LZMA_PROB32 */ +/* It can increase speed on some 32-bit CPUs, + but memory usage will be doubled in that case */ + +/* #define _LZMA_LOC_OPT */ +/* Enable local speed optimizations inside code */ + +#ifndef UInt32 +#ifdef _LZMA_UINT32_IS_ULONG +#define UInt32 unsigned long +#else +#define UInt32 unsigned int +#endif +#endif + +#ifdef _LZMA_PROB32 +#define CProb UInt32 +#else +#define CProb unsigned short +#endif + +#define LZMA_RESULT_OK 0 +#define LZMA_RESULT_DATA_ERROR 1 +#define LZMA_RESULT_NOT_ENOUGH_MEM 2 + +#ifdef _LZMA_IN_CB +typedef struct _ILzmaInCallback +{ + int (*Read)(void *object, unsigned char **buffer, UInt32 *bufferSize); +} ILzmaInCallback; +#endif + +#define LZMA_BASE_SIZE 1846 +#define LZMA_LIT_SIZE 768 + +/* +bufferSize = (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp)))* sizeof(CProb) +bufferSize += 100 in case of _LZMA_OUT_READ +by default CProb is unsigned short, +but if specify _LZMA_PROB_32, CProb will be UInt32(unsigned int) +*/ + +#ifdef _LZMA_OUT_READ +int LzmaDecoderInit( + unsigned char *buffer, UInt32 bufferSize, + int lc, int lp, int pb, + unsigned char *dictionary, UInt32 dictionarySize, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback + #else + unsigned char *inStream, UInt32 inSize + #endif +); +#endif + +int LzmaDecode( + unsigned char *buffer, + #ifndef _LZMA_OUT_READ + UInt32 bufferSize, + int lc, int lp, int pb, + #ifdef _LZMA_IN_CB + ILzmaInCallback *inCallback, + #else + unsigned char *inStream, UInt32 inSize, + #endif + #endif + unsigned char *outStream, UInt32 outSize, + UInt32 *outSizeProcessed); + +#endif diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/Makefile b/target/linux/easygate-2.6/image/lzma-loader/src/Makefile new file mode 100644 index 0000000000..85a864674b --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/Makefile @@ -0,0 +1,77 @@ +# +# Makefile for Broadcom BCM947XX boards +# +# Copyright 2001-2003, Broadcom Corporation +# All Rights Reserved. +# +# THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY +# KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM +# SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS +# FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. +# +# Copyright 2004 Manuel Novoa III +# Modified to support bzip'd kernels. +# Of course, it would be better to integrate bunzip capability into CFE. +# +# Copyright 2005 Oleg I. Vdovikin +# Cleaned up, modified for lzma support, removed from kernel +# + +TEXT_START := 0x80001000 +BZ_TEXT_START := 0x80300000 + +OBJCOPY := $(CROSS_COMPILE)objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S + +CFLAGS = -D__KERNEL__ -Wall -Wstrict-prototypes -Wno-trigraphs -Os \ + -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 -mno-abicalls -fno-pic \ + -ffunction-sections -pipe -mlong-calls -fno-common \ + -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 -Wa,-mips32 -Wa,--trap +CFLAGS += -DLOADADDR=$(TEXT_START) -D_LZMA_IN_CB + +ASFLAGS = $(CFLAGS) -D__ASSEMBLY__ -DBZ_TEXT_START=$(BZ_TEXT_START) + +SEDFLAGS := s/BZ_TEXT_START/$(BZ_TEXT_START)/;s/TEXT_START/$(TEXT_START)/ + +OBJECTS := head.o data.o + +all: loader.gz loader.elf + +# Don't build dependencies, this may die if $(CC) isn't gcc +dep: + +install: + +loader.gz: loader + gzip -nc9 $< > $@ + +loader.elf: loader.o + cp $< $@ + +loader: loader.o + $(OBJCOPY) $< $@ + +loader.o: loader.lds $(OBJECTS) + $(LD) -static --gc-sections -no-warn-mismatch -T loader.lds -o $@ $(OBJECTS) + +loader.lds: loader.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +data.o: data.lds decompress.image + $(LD) -no-warn-mismatch -T data.lds -r -o $@ -b binary decompress.image -b elf32-tradlittlemips + +data.lds: + @echo "SECTIONS { .data : { code_start = .; *(.data) code_stop = .; }}" > $@ + +decompress.image: decompress + $(OBJCOPY) $< $@ + +decompress: decompress.lds decompress.o LzmaDecode.o + $(LD) -static --gc-sections -no-warn-mismatch -T decompress.lds -o $@ decompress.o LzmaDecode.o + +decompress.lds: decompress.lds.in Makefile + @sed "$(SEDFLAGS)" < $< > $@ + +mrproper: clean + +clean: + rm -f loader.gz loader decompress *.lds *.o *.image diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/README b/target/linux/easygate-2.6/image/lzma-loader/src/README new file mode 100644 index 0000000000..16649e9500 --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/README @@ -0,0 +1,55 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +The code is intended to decompress kernel, being compressed using lzma utility +build using 7zip LZMA SDK. This utility is located in the LZMA_Alone directory + +decompressor code expects that your .trx file consist of three partitions: + +1) decompressor itself (this is gziped code which pmon/cfe will extract and run +on boot-up instead of real kernel) +2) LZMA compressed kernel (both streamed and regular modes are supported now) +3) Root filesystem + +Please be sure to apply the following patch for use this new trx layout (it will +allow using both new and old trx files for root filesystem lookup code) + +--- linuz/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:24:27.503322896 +0300 ++++ linux/arch/mips/brcm-boards/bcm947xx/setup.c 2005-01-23 19:29:05.237100944 +0300 +@@ -221,7 +221,9 @@ + /* Try looking at TRX header for rootfs offset */ + if (le32_to_cpu(trx->magic) == TRX_MAGIC) { + bcm947xx_parts[1].offset = off; +- if (le32_to_cpu(trx->offsets[1]) > off) ++ if (le32_to_cpu(trx->offsets[2]) > off) ++ off = le32_to_cpu(trx->offsets[2]); ++ else if (le32_to_cpu(trx->offsets[1]) > off) + off = le32_to_cpu(trx->offsets[1]); + continue; + } + + +Revision history: + 0.02 Initial release + 0.03 Added Mineharu Takahara patch to pass actual + output size to decoder (stream mode compressed input is not + a requirement anymore) + 0.04 Reordered functions using lds script diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/decompress.c b/target/linux/easygate-2.6/image/lzma-loader/src/decompress.c new file mode 100644 index 0000000000..ec510e21e3 --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/decompress.c @@ -0,0 +1,175 @@ +/* + * LZMA compressed kernel decompressor for bcm947xx boards + * + * Copyright (C) 2005 by Oleg I. Vdovikin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * + * Please note, this was code based on the bunzip2 decompressor code + * by Manuel Novoa III (mjn3@codepoet.org), although the only thing left + * is an idea and part of original vendor code + * + * + * 12-Mar-2005 Mineharu Takahara + * pass actual output size to decoder (stream mode + * compressed input is not a requirement anymore) + * + * 24-Apr-2005 Oleg I. Vdovikin + * reordered functions using lds script, removed forward decl + * + */ + +#include "LzmaDecode.h" + +#define BCM4710_FLASH 0x1fc00000 /* Flash */ + +#define KSEG0 0x80000000 +#define KSEG1 0xa0000000 + +#define KSEG1ADDR(a) ((((unsigned)(a)) & 0x1fffffffU) | KSEG1) + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + +#define cache_unroll(base,op) \ + __asm__ __volatile__( \ + ".set noreorder;\n" \ + ".set mips3;\n" \ + "cache %1, (%0);\n" \ + ".set mips0;\n" \ + ".set reorder\n" \ + : \ + : "r" (base), \ + "i" (op)); + +static __inline__ void blast_icache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Invalidate_I); + start += lsize; + } +} + +static __inline__ void blast_dcache(unsigned long size, unsigned long lsize) +{ + unsigned long start = KSEG0; + unsigned long end = (start + size); + + while(start < end) { + cache_unroll(start,Index_Writeback_Inv_D); + start += lsize; + } +} + +#define TRX_MAGIC 0x30524448 /* "HDR0" */ + +struct trx_header { + unsigned int magic; /* "HDR0" */ + unsigned int len; /* Length of file including header */ + unsigned int crc32; /* 32-bit CRC from flag_version to end of file */ + unsigned int flag_version; /* 0:15 flags, 16:31 version */ + unsigned int offsets[3]; /* Offsets of partitions from start of header */ +}; + +/* beyound the image end, size not known in advance */ +extern unsigned char workspace[]; + +unsigned int offset; +unsigned char *data; + +/* flash access should be aligned, so wrapper is used */ +/* read byte from the flash, all accesses are 32-bit aligned */ +static int read_byte(void *object, unsigned char **buffer, UInt32 *bufferSize) +{ + static unsigned int val; + + if (((unsigned int)offset % 4) == 0) { + val = *(unsigned int *)data; + data += 4; + } + + *bufferSize = 1; + *buffer = ((unsigned char *)&val) + (offset++ & 3); + + return LZMA_RESULT_OK; +} + +static __inline__ unsigned char get_byte(void) +{ + unsigned char *buffer; + UInt32 fake; + + return read_byte(0, &buffer, &fake), *buffer; +} + +/* should be the first function */ +void entry(unsigned long icache_size, unsigned long icache_lsize, + unsigned long dcache_size, unsigned long dcache_lsize) +{ + unsigned int i; /* temp value */ + unsigned int lc; /* literal context bits */ + unsigned int lp; /* literal pos state bits */ + unsigned int pb; /* pos state bits */ + unsigned int osize; /* uncompressed size */ + + ILzmaInCallback callback; + callback.Read = read_byte; + + /* look for trx header, 32-bit data access */ + for (data = ((unsigned char *) KSEG1ADDR(BCM4710_FLASH)); + ((struct trx_header *)data)->magic != TRX_MAGIC; data += 65536); + + /* compressed kernel is in the partition 0 or 1 */ + if (((struct trx_header *)data)->offsets[1] > 65536) + data += ((struct trx_header *)data)->offsets[0]; + else + data += ((struct trx_header *)data)->offsets[1]; + + offset = 0; + + /* lzma args */ + i = get_byte(); + lc = i % 9, i = i / 9; + lp = i % 5, pb = i / 5; + + /* skip rest of the LZMA coder property */ + for (i = 0; i < 4; i++) + get_byte(); + + /* read the lower half of uncompressed size in the header */ + osize = ((unsigned int)get_byte()) + + ((unsigned int)get_byte() << 8) + + ((unsigned int)get_byte() << 16) + + ((unsigned int)get_byte() << 24); + + /* skip rest of the header (upper half of uncompressed size) */ + for (i = 0; i < 4; i++) + get_byte(); + + /* decompress kernel */ + if (LzmaDecode(workspace, ~0, lc, lp, pb, &callback, + (unsigned char*)LOADADDR, osize, &i) == LZMA_RESULT_OK) + { + blast_dcache(dcache_size, dcache_lsize); + blast_icache(icache_size, icache_lsize); + + /* Jump to load address */ + ((void (*)(void)) LOADADDR)(); + } +} diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/decompress.lds.in b/target/linux/easygate-2.6/image/lzma-loader/src/decompress.lds.in new file mode 100644 index 0000000000..33f56f8a09 --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/decompress.lds.in @@ -0,0 +1,20 @@ +OUTPUT_ARCH(mips) +ENTRY(entry) +SECTIONS { + . = BZ_TEXT_START; + .text : { + *(.text.entry) + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } + + workspace = .; +} diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/head.S b/target/linux/easygate-2.6/image/lzma-loader/src/head.S new file mode 100644 index 0000000000..9bfbd53d51 --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/head.S @@ -0,0 +1,155 @@ +/* Copyright 2005 Oleg I. Vdovikin (oleg@cs.msu.su) */ +/* cache manipulation adapted from Broadcom code */ +/* idea taken from original bunzip2 decompressor code */ +/* Copyright 2004 Manuel Novoa III (mjn3@codepoet.org) */ +/* Licensed under the linux kernel's version of the GPL.*/ + +#include +#include + +#define KSEG0 0x80000000 + +#define C0_CONFIG $16 +#define C0_TAGLO $28 +#define C0_TAGHI $29 + +#define CONF1_DA_SHIFT 7 /* D$ associativity */ +#define CONF1_DA_MASK 0x00000380 +#define CONF1_DA_BASE 1 +#define CONF1_DL_SHIFT 10 /* D$ line size */ +#define CONF1_DL_MASK 0x00001c00 +#define CONF1_DL_BASE 2 +#define CONF1_DS_SHIFT 13 /* D$ sets/way */ +#define CONF1_DS_MASK 0x0000e000 +#define CONF1_DS_BASE 64 +#define CONF1_IA_SHIFT 16 /* I$ associativity */ +#define CONF1_IA_MASK 0x00070000 +#define CONF1_IA_BASE 1 +#define CONF1_IL_SHIFT 19 /* I$ line size */ +#define CONF1_IL_MASK 0x00380000 +#define CONF1_IL_BASE 2 +#define CONF1_IS_SHIFT 22 /* Instruction cache sets/way */ +#define CONF1_IS_MASK 0x01c00000 +#define CONF1_IS_BASE 64 + +#define Index_Invalidate_I 0x00 +#define Index_Writeback_Inv_D 0x01 + + .text + LEAF(startup) + .set noreorder + + /* Copy decompressor code to the right place */ + li t2, BZ_TEXT_START + add a0, t2, 0 + la a1, code_start + la a2, code_stop +$L1: + lw t0, 0(a1) + sw t0, 0(a0) + add a1, 4 + add a0, 4 + blt a1, a2, $L1 + nop + + /* At this point we need to invalidate dcache and */ + /* icache before jumping to new code */ + +1: /* Get cache sizes */ + .set mips32 + mfc0 s0,C0_CONFIG,1 + .set mips0 + + li s1,CONF1_DL_MASK + and s1,s0 + beq s1,zero,nodc + nop + + srl s1,CONF1_DL_SHIFT + li t0,CONF1_DL_BASE + sll s1,t0,s1 /* s1 has D$ cache line size */ + + li s2,CONF1_DA_MASK + and s2,s0 + srl s2,CONF1_DA_SHIFT + addiu s2,CONF1_DA_BASE /* s2 now has D$ associativity */ + + li t0,CONF1_DS_MASK + and t0,s0 + srl t0,CONF1_DS_SHIFT + li s3,CONF1_DS_BASE + sll s3,s3,t0 /* s3 has D$ sets per way */ + + multu s2,s3 /* sets/way * associativity */ + mflo t0 /* total cache lines */ + + multu s1,t0 /* D$ linesize * lines */ + mflo s2 /* s2 is now D$ size in bytes */ + + /* Initilize the D$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s2 /* + size of cache == end */ + + .set mips3 +1: cache Index_Writeback_Inv_D,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s1 + +nodc: + /* Now we get to do it all again for the I$ */ + + move s3,zero /* just in case there is no icache */ + move s4,zero + + li t0,CONF1_IL_MASK + and t0,s0 + beq t0,zero,noic + nop + + srl t0,CONF1_IL_SHIFT + li s3,CONF1_IL_BASE + sll s3,t0 /* s3 has I$ cache line size */ + + li t0,CONF1_IA_MASK + and t0,s0 + srl t0,CONF1_IA_SHIFT + addiu s4,t0,CONF1_IA_BASE /* s4 now has I$ associativity */ + + li t0,CONF1_IS_MASK + and t0,s0 + srl t0,CONF1_IS_SHIFT + li s5,CONF1_IS_BASE + sll s5,t0 /* s5 has I$ sets per way */ + + multu s4,s5 /* sets/way * associativity */ + mflo t0 /* s4 is now total cache lines */ + + multu s3,t0 /* I$ linesize * lines */ + mflo s4 /* s4 is cache size in bytes */ + + /* Initilize the I$: */ + mtc0 zero,C0_TAGLO + mtc0 zero,C0_TAGHI + + li t0,KSEG0 /* Just an address for the first $ line */ + addu t1,t0,s4 /* + size of cache == end */ + + .set mips3 +1: cache Index_Invalidate_I,0(t0) + .set mips0 + bne t0,t1,1b + addu t0,s3 + +noic: + move a0,s3 /* icache line size */ + move a1,s4 /* icache size */ + move a2,s1 /* dcache line size */ + jal t2 + move a3,s2 /* dcache size */ + + .set reorder + END(startup) diff --git a/target/linux/easygate-2.6/image/lzma-loader/src/loader.lds.in b/target/linux/easygate-2.6/image/lzma-loader/src/loader.lds.in new file mode 100644 index 0000000000..20f2ea98ec --- /dev/null +++ b/target/linux/easygate-2.6/image/lzma-loader/src/loader.lds.in @@ -0,0 +1,17 @@ +OUTPUT_ARCH(mips) +ENTRY(startup) +SECTIONS { + . = TEXT_START; + .text : { + *(.text) + *(.rodata) + } + + .data : { + *(.data) + } + + .bss : { + *(.bss) + } +} diff --git a/target/linux/easygate-2.6/patches/001-bcm963xx.patch b/target/linux/easygate-2.6/patches/001-bcm963xx.patch new file mode 100644 index 0000000000..42fc728ab7 --- /dev/null +++ b/target/linux/easygate-2.6/patches/001-bcm963xx.patch @@ -0,0 +1,220 @@ +diff -urN linux-2.6.19/arch/mips/Kconfig linux-2.6.19.new/arch/mips/Kconfig +--- linux-2.6.19/arch/mips/Kconfig 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/Kconfig 2006-12-16 18:46:31.000000000 +0100 +@@ -4,6 +4,10 @@ + # Horrible source of confusion. Die, die, die ... + select EMBEDDED + ++config CFE ++ bool ++ # Common Firmware Environment ++ + mainmenu "Linux/MIPS Kernel Configuration" + + menu "Machine selection" +@@ -12,6 +12,18 @@ + prompt "System type" + default SGI_IP22 + ++config BCM963XX ++ bool "Support for Broadcom BCM963xx SoC" ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select HW_HAS_PCI ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select CFE ++ help ++ This is a fmaily of boards based on the Broadcom MIPS32 ++ + config MIPS_MTX1 + bool "4G Systems MTX-1 board" + select DMA_NONCOHERENT +diff -urN linux-2.6.19/arch/mips/Makefile linux-2.6.19.new/arch/mips/Makefile +--- linux-2.6.19/arch/mips/Makefile 2006-12-16 17:36:29.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/Makefile 2006-12-16 18:46:31.000000000 +0100 +@@ -158,6 +158,19 @@ + # + + # ++# Broadcom BCM963xx SoC ++# ++core-$(CONFIG_BCM963XX) += arch/mips/bcm963xx/ ++cflags-$(CONFIG_BCM963XX) += -Iinclude/asm-mips/mach-bcm963xx ++load-$(CONFIG_BCM963XX) += 0xffffffff80010000 ++ ++ ++# ++# Common Firmware Environment ++# ++core-$(CONFIG_CFE) += arch/mips/cfe/ ++ ++# + # Acer PICA 61, Mips Magnum 4000 and Olivetti M700. + # + core-$(CONFIG_MACH_JAZZ) += arch/mips/jazz/ +diff -urN linux-2.6.19/arch/mips/kernel/cpu-probe.c linux-2.6.19.new/arch/mips/kernel/cpu-probe.c +--- linux-2.6.19/arch/mips/kernel/cpu-probe.c 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/kernel/cpu-probe.c 2006-12-16 18:46:31.000000000 +0100 +@@ -602,6 +602,25 @@ + return; + } + ++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) ++{ ++ decode_configs(c); ++ switch (c->processor_id & 0xff00) { ++ case PRID_IMP_BCM6338: ++ c->cputype = CPU_BCM6338; ++ break; ++ case PRID_IMP_BCM6345: ++ c->cputype = CPU_BCM6345; ++ break; ++ case PRID_IMP_BCM6348: ++ c->cputype = CPU_BCM6348; ++ break; ++ default: ++ c->cputype = CPU_UNKNOWN; ++ break; ++ } ++} ++ + static inline void cpu_probe_mips(struct cpuinfo_mips *c) + { + decode_configs(c); +@@ -736,6 +755,9 @@ + case PRID_COMP_LEGACY: + cpu_probe_legacy(c); + break; ++ case PRID_COMP_BROADCOM: ++ cpu_probe_broadcom(c); ++ break; + case PRID_COMP_MIPS: + cpu_probe_mips(c); + break; +diff -urN linux-2.6.19/arch/mips/kernel/proc.c linux-2.6.19.new/arch/mips/kernel/proc.c +--- linux-2.6.19/arch/mips/kernel/proc.c 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/kernel/proc.c 2006-12-16 18:46:31.000000000 +0100 +@@ -84,6 +84,9 @@ + [CPU_VR4181A] = "NEC VR4181A", + [CPU_SR71000] = "Sandcraft SR71000", + [CPU_PR4450] = "Philips PR4450", ++ [CPU_BCM6338] = "BCM6338", ++ [CPU_BCM6345] = "BCM6345", ++ [CPU_BCM6348] = "BCM6348", + }; + + +diff -urN linux-2.6.19/arch/mips/mm/c-r4k.c linux-2.6.19.new/arch/mips/mm/c-r4k.c +--- linux-2.6.19/arch/mips/mm/c-r4k.c 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/mm/c-r4k.c 2006-12-16 18:46:31.000000000 +0100 +@@ -852,6 +852,13 @@ + if (!(config & MIPS_CONF_M)) + panic("Don't know how to probe P-caches on this cpu."); + ++ if (c->cputype == CPU_BCM6338 || c->cputype == CPU_BCM6345 || c->cputype == CPU_BCM6348) ++ { ++ printk("bcm963xx: enabling icache and dcache...\n"); ++ /* Enable caches */ ++ write_c0_diag(read_c0_diag() | 0xC0000000); ++ } ++ + /* + * So we seem to be a MIPS32 or MIPS64 CPU + * So let's probe the I-cache ... +diff -urN linux-2.6.19/arch/mips/mm/tlbex.c linux-2.6.19.new/arch/mips/mm/tlbex.c +--- linux-2.6.19/arch/mips/mm/tlbex.c 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/mm/tlbex.c 2006-12-16 18:46:31.000000000 +0100 +@@ -880,6 +880,9 @@ + case CPU_4KSC: + case CPU_20KC: + case CPU_25KF: ++ case CPU_BCM6338: ++ case CPU_BCM6345: ++ case CPU_BCM6348: + tlbw(p); + break; + +diff -urN linux-2.6.19/arch/mips/pci/Makefile linux-2.6.19.new/arch/mips/pci/Makefile +--- linux-2.6.19/arch/mips/pci/Makefile 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/arch/mips/pci/Makefile 2006-12-16 18:48:18.000000000 +0100 +@@ -17,6 +17,7 @@ + obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o + obj-$(CONFIG_NEC_CMBVR4133) += fixup-vr4133.o + obj-$(CONFIG_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o ++obj-$(CONFIG_BCM963XX) += fixup-bcm96348.o pci-bcm96348.o ops-bcm96348.o + + # + # These are still pretty much in the old state, watch, go blind. +diff -urN linux-2.6.19/drivers/serial/Makefile linux-2.6.19.new/drivers/serial/Makefile +--- linux-2.6.19/drivers/serial/Makefile 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/drivers/serial/Makefile 2006-12-16 18:49:17.000000000 +0100 +@@ -56,3 +56,4 @@ + obj-$(CONFIG_SERIAL_SGI_IOC3) += ioc3_serial.o + obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o + obj-$(CONFIG_SERIAL_NETX) += netx-serial.o ++obj-$(CONFIG_BCM963XX) += bcm63xx_cons.o +diff -urN linux-2.6.19/include/asm-mips/bootinfo.h linux-2.6.19.new/include/asm-mips/bootinfo.h +--- linux-2.6.19/include/asm-mips/bootinfo.h 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/include/asm-mips/bootinfo.h 2006-12-16 18:46:31.000000000 +0100 +@@ -212,6 +212,14 @@ + #define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */ + #define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */ + ++/* ++ * Valid machtype for group BRCM ++ */ ++#define MACH_GROUP_BRCM 23 /* Broadcom boards */ ++#define MACH_BCM96338 0 ++#define MACH_BCM96345 1 ++#define MACH_BCM96348 2 ++ + #define CL_SIZE COMMAND_LINE_SIZE + + const char *get_system_type(void); +diff -urN linux-2.6.19/include/asm-mips/cpu.h linux-2.6.19.new/include/asm-mips/cpu.h +--- linux-2.6.19/include/asm-mips/cpu.h 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/include/asm-mips/cpu.h 2006-12-16 18:46:31.000000000 +0100 +@@ -103,6 +103,13 @@ + + #define PRID_IMP_SR71000 0x0400 + ++/* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM ++ */ ++ ++#define PRID_IMP_BCM6338 0x9000 ++#define PRID_IMP_BCM6345 0x8000 ++#define PRID_IMP_BCM6348 0x9100 ++ + /* + * Definitions for 7:0 on legacy processors + */ +@@ -200,7 +207,10 @@ + #define CPU_SB1A 62 + #define CPU_74K 63 + #define CPU_R14000 64 +-#define CPU_LAST 64 ++#define CPU_BCM6338 65 ++#define CPU_BCM6345 66 ++#define CPU_BCM6348 67 ++#define CPU_LAST 67 + + /* + * ISA Level encodings +diff -urN linux-2.6.19/include/asm-mips/module.h linux-2.6.19.new/include/asm-mips/module.h +--- linux-2.6.19/include/asm-mips/module.h 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/include/asm-mips/module.h 2006-12-16 19:03:22.000000000 +0100 +@@ -112,6 +112,12 @@ + #define MODULE_PROC_FAMILY "RM9000 " + #elif defined CONFIG_CPU_SB1 + #define MODULE_PROC_FAMILY "SB1 " ++#elif defined CONFIG_CPU_BCM6338 ++#define MODULE_PROC_FAMILY "BCM6338 " ++#elif defined CONFIG_CPU_BCM6345 ++#define MODULE_PROC_FAMILY "BCM6345 " ++#elif defined CONFIG_CPU_BCM6348 ++#define MODULE_PROC_FAMILY "BCM6348 " + #else + #error MODULE_PROC_FAMILY undefined for your processor configuration + #endif diff --git a/target/linux/easygate-2.6/patches/040-bcm963xx_flashmap.patch b/target/linux/easygate-2.6/patches/040-bcm963xx_flashmap.patch new file mode 100644 index 0000000000..82a2c94059 --- /dev/null +++ b/target/linux/easygate-2.6/patches/040-bcm963xx_flashmap.patch @@ -0,0 +1,63 @@ +diff -urN linux-2.6.19/drivers/mtd/maps/Kconfig linux-2.6.19.new/drivers/mtd/maps/Kconfig +--- linux-2.6.19/drivers/mtd/maps/Kconfig 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/drivers/mtd/maps/Kconfig 2006-12-18 17:21:07.000000000 +0100 +@@ -224,6 +224,13 @@ + Flash memory access on 4G Systems MTX-1 Board. If you have one of + these boards and would like to use the flash chips on it, say 'Y'. + ++config MTD_BCM963XX ++ tristate "BCM963xx Flash device" ++ depends on MIPS && BCM963XX ++ help ++ Flash memory access on BCM963xx boards. Currently only works with ++ RedBoot and CFE. ++ + config MTD_DILNETPC + tristate "CFI Flash device mapped on DIL/Net PC" + depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT +diff -urN linux-2.6.19/drivers/mtd/maps/Makefile linux-2.6.19.new/drivers/mtd/maps/Makefile +--- linux-2.6.19/drivers/mtd/maps/Makefile 2006-11-29 22:57:37.000000000 +0100 ++++ linux-2.6.19.new/drivers/mtd/maps/Makefile 2006-12-18 17:21:07.000000000 +0100 +@@ -70,3 +70,4 @@ + obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o + obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o + obj-$(CONFIG_MTD_TQM834x) += tqm834x.o ++obj-$(CONFIG_MTD_BCM963XX) += bcm963xx-flash.o +diff -urN linux-2.6.19/drivers/mtd/redboot.c linux-2.6.19.new/drivers/mtd/redboot.c +--- linux-2.6.19/drivers/mtd/redboot.c 2006-12-18 17:09:14.000000000 +0100 ++++ linux-2.6.19.new/drivers/mtd/redboot.c 2006-12-18 17:14:26.000000000 +0100 +@@ -39,7 +39,7 @@ + return 1; + } + +-static int parse_redboot_partitions(struct mtd_info *master, ++int parse_redboot_partitions(struct mtd_info *master, + struct mtd_partition **pparts, + unsigned long fis_origin) + { +@@ -132,6 +132,14 @@ + goto out; + } + ++ if (!fis_origin) { ++ for (i = 0; i < numslots; i++) { ++ if (!strncmp(buf[i].name, "RedBoot", 8)) { ++ fis_origin = (buf[i].flash_base & (master->size << 1) - 1); ++ } ++ } ++ } ++ + for (i = 0; i < numslots; i++) { + struct fis_list *new_fl, **prev; + +@@ -154,9 +162,8 @@ + new_fl->img = &buf[i]; + if (fis_origin) { + buf[i].flash_base -= fis_origin; +- } else { +- buf[i].flash_base &= master->size-1; + } ++ buf[i].flash_base &= (master->size << 1) - 1; + + /* I'm sure the JFFS2 code has done me permanent damage. + * I now think the following is _normal_ diff --git a/target/linux/easygate-2.6/patches/100-atm_hacks.patch b/target/linux/easygate-2.6/patches/100-atm_hacks.patch new file mode 100644 index 0000000000..7535c223e7 --- /dev/null +++ b/target/linux/easygate-2.6/patches/100-atm_hacks.patch @@ -0,0 +1,186 @@ +diff -urN linux-2.6.19.1/include/linux/atm.h linux-2.6.19.1.new/include/linux/atm.h +--- linux-2.6.19.1/include/linux/atm.h 2006-12-11 20:32:53.000000000 +0100 ++++ linux-2.6.19.1.new/include/linux/atm.h 2007-01-07 18:38:50.000000000 +0100 +@@ -48,6 +48,9 @@ + #define ATM_AAL2 2 /* AAL2 (VBR) */ + #define ATM_AAL34 3 /* AAL3/4 (data) */ + #define ATM_AAL5 5 /* AAL5 (data) */ ++#if defined(CONFIG_MIPS_BCM963XX) ++#define ATM_BCM_AAL0 14 /* "raw" ATM cells */ ++#endif + + /* + * socket option name coding functions +diff -urN linux-2.6.19.1/include/linux/atmbr2684.h linux-2.6.19.1.new/include/linux/atmbr2684.h +--- linux-2.6.19.1/include/linux/atmbr2684.h 2006-12-11 20:32:53.000000000 +0100 ++++ linux-2.6.19.1.new/include/linux/atmbr2684.h 2007-01-07 18:24:01.000000000 +0100 +@@ -78,6 +78,10 @@ + __u8 vpn_id[7]; + int send_padding; /* unsupported */ + int min_size; /* we will pad smaller packets than this */ ++#if defined(CONFIG_MIPS_BCM963XX) ++#define FILTER_PPPOE 1 ++ int proto_filter; /* protocol filter flag, current only PPPoE */ ++#endif + }; + + /* +diff -urN linux-2.6.19.1/include/linux/atmdev.h linux-2.6.19.1.new/include/linux/atmdev.h +--- linux-2.6.19.1/include/linux/atmdev.h 2006-12-11 20:32:53.000000000 +0100 ++++ linux-2.6.19.1.new/include/linux/atmdev.h 2007-01-07 18:37:34.000000000 +0100 +@@ -29,6 +29,10 @@ + #define ATM_DS3_PCR (8000*12) + /* DS3: 12 cells in a 125 usec time slot */ + ++#if defined(CONFIG_MIPS_BCM963XX) ++#define atm_sk(__sk) ((struct atm_vcc *)(__sk)->sk_protinfo) ++#define ATM_SD(s) (atm_sk((s)->sk)) ++#endif + + #define __AAL_STAT_ITEMS \ + __HANDLE_ITEM(tx); /* TX okay */ \ +@@ -111,6 +115,9 @@ + #define ATM_BACKEND_RAW 0 + #define ATM_BACKEND_PPP 1 /* PPPoATM - RFC2364 */ + #define ATM_BACKEND_BR2684 2 /* Bridged RFC1483/2684 */ ++#if defined(CONFIG_MIPS_BCM963XX) ++#define ATM_BACKEND_RT2684 3 /* Routed RFC1483/2684 */ ++#endif + + /* for ATM_GETTYPE */ + #define ATM_ITFTYP_LEN 8 /* maximum length of interface type name */ +@@ -274,6 +281,9 @@ + + + enum { ++#if defined(CONFIG_MIPS_BCM963XX) ++ ATM_DF_CLOSE, /* close device when last VCC is closed */ ++#endif + ATM_DF_REMOVED, /* device was removed from atm_devs list */ + }; + +@@ -285,8 +295,10 @@ + #define ATM_ATMOPT_CLP 1 /* set CLP bit */ + + struct atm_vcc { ++#if !defined(CONFIG_MIPS_BCM963XX) + /* struct sock has to be the first member of atm_vcc */ + struct sock sk; ++#endif + unsigned long flags; /* VCC flags (ATM_VF_*) */ + short vpi; /* VPI and VCI (types must be equal */ + /* with sockaddr) */ +@@ -303,6 +315,9 @@ + void *dev_data; /* per-device data */ + void *proto_data; /* per-protocol data */ + struct k_atm_aal_stats *stats; /* pointer to AAL stats group */ ++#if defined(CONFIG_MIPS_BCM963XX) ++ struct sock *sk; /* socket backpointer */ ++#endif + /* SVC part --- may move later ------------------------------------- */ + short itf; /* interface number */ + struct sockaddr_atmsvc local; +@@ -332,7 +347,11 @@ + + struct atm_dev_addr { + struct sockaddr_atmsvc addr; /* ATM address */ ++#if defined(CONFIG_MIPS_BCM963XX) ++ struct atm_dev_addr *next; /* next address */ ++#else + struct list_head entry; /* next address */ ++#endif + }; + + enum atm_addr_type_t { ATM_ADDR_LOCAL, ATM_ADDR_LECS }; +@@ -346,8 +365,12 @@ + void *dev_data; /* per-device data */ + void *phy_data; /* private PHY date */ + unsigned long flags; /* device flags (ATM_DF_*) */ ++#if defined(CONFIG_MIPS_BCM963XX) ++ struct atm_dev_addr *local; /* local ATM addresses */ ++#else + struct list_head local; /* local ATM addresses */ + struct list_head lecs; /* LECS ATM addresses learned via ILMI */ ++#endif + unsigned char esi[ESI_LEN]; /* ESI ("MAC" addr) */ + struct atm_cirange ci_range; /* VPI/VCI range */ + struct k_atm_dev_stats stats; /* statistics */ +@@ -359,7 +382,9 @@ + struct proc_dir_entry *proc_entry; /* proc entry */ + char *proc_name; /* proc entry name */ + #endif ++#if !defined(CONFIG_MIPS_BCM963XX) + struct class_device class_dev; /* sysfs class device */ ++#endif + struct list_head dev_list; /* linkage */ + }; + +@@ -416,7 +441,13 @@ + int number,unsigned long *flags); /* number == -1: pick first available */ + struct atm_dev *atm_dev_lookup(int number); + void atm_dev_deregister(struct atm_dev *dev); ++#if defined(CONFIG_MIPS_BCM963XX) ++void shutdown_atm_dev(struct atm_dev *dev); ++#endif + void vcc_insert_socket(struct sock *sk); ++#if defined(CONFIG_MIPS_BCM963XX) ++void vcc_remove_socket(struct sock *sk); ++#endif + + + /* +@@ -432,20 +463,33 @@ + + static inline void atm_force_charge(struct atm_vcc *vcc,int truesize) + { ++#if defined(CONFIG_MIPS_BCM963XX) ++ atomic_add(truesize, &vcc->sk->sk_rmem_alloc); ++#else + atomic_add(truesize, &sk_atm(vcc)->sk_rmem_alloc); ++#endif + } + + + static inline void atm_return(struct atm_vcc *vcc,int truesize) + { ++#if defined(CONFIG_MIPS_BCM963XX) ++ atomic_sub(truesize, &vcc->sk->sk_rmem_alloc); ++#else + atomic_sub(truesize, &sk_atm(vcc)->sk_rmem_alloc); ++#endif + } + + + static inline int atm_may_send(struct atm_vcc *vcc,unsigned int size) + { ++#if defined(CONFIG_MIPS_BCM963XX) ++ return (size + atomic_read(&vcc->sk->sk_wmem_alloc)) < ++ vcc->sk->sk_sndbuf; ++#else + return (size + atomic_read(&sk_atm(vcc)->sk_wmem_alloc)) < + sk_atm(vcc)->sk_sndbuf; ++#endif + } + + +@@ -457,12 +501,20 @@ + + static inline void atm_dev_put(struct atm_dev *dev) + { ++#if defined(CONFIG_MIPS_BCM963XX) ++ atomic_dec(&dev->refcnt); ++ ++ if ((atomic_read(&dev->refcnt) == 1) && ++ test_bit(ATM_DF_CLOSE,&dev->flags)) ++ shutdown_atm_dev(dev); ++#else + if (atomic_dec_and_test(&dev->refcnt)) { + BUG_ON(!test_bit(ATM_DF_REMOVED, &dev->flags)); + if (dev->ops->dev_close) + dev->ops->dev_close(dev); + class_device_put(&dev->class_dev); + } ++#endif + } + + diff --git a/target/linux/easygate-2.6/patches/150-sst_flash.patch b/target/linux/easygate-2.6/patches/150-sst_flash.patch new file mode 100644 index 0000000000..ba9fcb9c31 --- /dev/null +++ b/target/linux/easygate-2.6/patches/150-sst_flash.patch @@ -0,0 +1,36 @@ +diff -urN linux-2.6.19.2/drivers/mtd/chips/jedec_probe.c linux-2.6.19.2.new/drivers/mtd/chips/jedec_probe.c +--- linux-2.6.19.2/drivers/mtd/chips/jedec_probe.c 2007-01-10 20:10:37.000000000 +0100 ++++ linux-2.6.19.2.new/drivers/mtd/chips/jedec_probe.c 2007-04-09 22:33:05.000000000 +0200 +@@ -158,6 +158,7 @@ + #define SST49LF030A 0x001C + #define SST49LF040A 0x0051 + #define SST49LF080A 0x005B ++#define SST39VF6402B 0x236C + + /* Toshiba */ + #define TC58FVT160 0x00C2 +@@ -1494,7 +1495,23 @@ + ERASEINFO(0x1000,256), + ERASEINFO(0x1000,256) + } +- ++ }, { ++ .mfr_id = MANUFACTURER_SST, ++ .dev_id = SST39VF6402B, ++ .name = "SST 39VF6402B", ++ .uaddr = { ++ [0] = MTD_UADDR_0x5555_0x2AAA, /* x8 */ ++ [1] = MTD_UADDR_0x5555_0x2AAA /* x16 */ ++ }, ++ .DevSize = SIZE_8MiB, ++ .CmdSet = P_ID_AMD_STD, ++ .NumEraseRegions= 4, ++ .regions = { ++ ERASEINFO(0x2000,256), ++ ERASEINFO(0x2000,256), ++ ERASEINFO(0x2000,256), ++ ERASEINFO(0x2000,256) ++ } + }, { + .mfr_id = MANUFACTURER_ST, /* FIXME - CFI device? */ + .dev_id = M29W800DT, diff --git a/target/linux/easygate-2.6/profiles/Atheros.mk b/target/linux/easygate-2.6/profiles/Atheros.mk new file mode 100644 index 0000000000..029586848f --- /dev/null +++ b/target/linux/easygate-2.6/profiles/Atheros.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Atheros + NAME:=Atheros WiFi (default) + PACKAGES:=kmod-madwifi +endef + +define Profile/Atheros/Description + Package set compatible with hardware using Atheros WiFi cards +endef +$(eval $(call Profile,Atheros)) + diff --git a/target/linux/easygate-2.6/profiles/Broadcom.mk b/target/linux/easygate-2.6/profiles/Broadcom.mk new file mode 100644 index 0000000000..5fe71bb525 --- /dev/null +++ b/target/linux/easygate-2.6/profiles/Broadcom.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Broadcom + NAME:=Broadcom WiFi (default) + PACKAGES:=kmod-net-bcm43xx +endef + +define Profile/Broadcom/Description + Package set compatible with hardware using Broadcom WiFi cards +endef +$(eval $(call Profile,Broadcom)) + diff --git a/target/linux/easygate-2.6/profiles/Ralink.mk b/target/linux/easygate-2.6/profiles/Ralink.mk new file mode 100644 index 0000000000..f4c435ddca --- /dev/null +++ b/target/linux/easygate-2.6/profiles/Ralink.mk @@ -0,0 +1,13 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/Ralink + NAME:=Ralink WiFi + PACKAGES:=kmod-rt61 +endef +$(eval $(call Profile,Ralink)) +