From: Hamish Guthrie <hcg@openwrt.org>
Date: Mon, 28 May 2007 13:50:35 +0000 (+0000)
Subject: patch no longer required - incorporated in base patches
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;h=e3bfcb9f6bd818f251a8efe73070ef140890b936

patch no longer required - incorporated in base patches


SVN-Revision: 7371
---

diff --git a/target/linux/at91-2.6/patches/004-mmc-driver.patch b/target/linux/at91-2.6/patches/004-mmc-driver.patch
deleted file mode 100644
index 31e307b127..0000000000
--- a/target/linux/at91-2.6/patches/004-mmc-driver.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- linux-2.6.19.2/arch/arm/mach-at91rm9200/board-vlink.c	2007-03-16 16:46:50.000000000 +0100
-+++ linux-2.6.19.2.new/arch/arm/mach-at91rm9200/board-vlink.c	2007-03-17 11:27:00.000000000 +0100
-@@ -83,13 +83,13 @@
- 	.pullup_pin	= AT91_PIN_PD5,
- };
- 
--/*static struct at91_mmc_data __initdata ek_mmc_data = {
--	.det_pin	= AT91_PIN_PB27,
--	.is_b		= 0,
-+static struct at91_mmc_data __initdata vlink_mmc_data = {
-+//	.det_pin	= AT91_PIN_PB27,
-+	.slot_b		= 0,
- 	.wire4		= 1,
--	.wp_pin		= AT91_PIN_PA17,
-+//	.wp_pin		= AT91_PIN_PA17,
- };
--*/
-+
- 
- static struct spi_board_info vlink_spi_devices[] = {
- 	{	/* DataFlash chip */
-@@ -127,7 +127,7 @@
- #else
- 	/* MMC */
- //	at91_set_gpio_output(AT91_PIN_PB22, 1);	/* this MMC card slot can optionally use SPI signaling (CS3). */
--//	at91_add_device_mmc(&vlink_mmc_data);
-+	at91_add_device_mmc(&vlink_mmc_data);
- #endif
- 	/* VGA */
- }