From: Felix Fietkau Date: Tue, 6 Jan 2009 22:38:38 +0000 (+0000) Subject: nuke old 2.6.23 code for brcm47xx X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;hb=479599a35f9b42c71ea8e654817e476f68c7ad5b nuke old 2.6.23 code for brcm47xx SVN-Revision: 13910 --- diff --git a/target/linux/brcm47xx/config-2.6.23 b/target/linux/brcm47xx/config-2.6.23 deleted file mode 100644 index 41b440b44f..0000000000 --- a/target/linux/brcm47xx/config-2.6.23 +++ /dev/null @@ -1,246 +0,0 @@ -CONFIG_32BIT=y -# CONFIG_64BIT is not set -# CONFIG_8139TOO is not set -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_ARPD is not set -# CONFIG_ATMEL is not set -CONFIG_B44=y -CONFIG_BASE_SMALL=0 -# CONFIG_BCM43XX is not set -CONFIG_BCM947XX=y -CONFIG_BITREVERSE=y -# CONFIG_BONDING is not set -# CONFIG_BSD_DISKLABEL is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_BT_HCIBCM203X is not set -# CONFIG_BT_HCIBFUSB is not set -# CONFIG_BT_HCIBPA10X is not set -# CONFIG_BT_HCIVHCI is not set -CONFIG_CFE=y -# CONFIG_CIFS_STATS is not set -# CONFIG_CLS_U32_MARK is not set -# CONFIG_CLS_U32_PERF is not set -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200" -# CONFIG_CONFIGFS_FS is not set -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_LITTLE_ENDIAN=y -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -CONFIG_CPU_MIPSR1=y -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_VR41XX is not set -CONFIG_DEVPORT=y -# CONFIG_DM9000 is not set -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_E100 is not set -CONFIG_FS_POSIX_ACL=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_GPIO=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HID=m -# CONFIG_HID_SUPPORT is not set -CONFIG_HW_HAS_PCI=y -CONFIG_HW_RANDOM=y -CONFIG_HZ=250 -# CONFIG_HZ_100 is not set -CONFIG_HZ_250=y -# CONFIG_I2C is not set -# CONFIG_IDE is not set -# CONFIG_IKCONFIG is not set -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_INITRAMFS_SOURCE="" -CONFIG_INPUT=m -# CONFIG_IP6_NF_MATCH_FRAG is not set -# CONFIG_IP6_NF_MATCH_HL is not set -# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set -# CONFIG_IP6_NF_MATCH_OPTS is not set -# CONFIG_IP6_NF_MATCH_RT is not set -# CONFIG_IP6_NF_TARGET_HL is not set -CONFIG_IPW2200_QOS=y -# CONFIG_IP_ROUTE_VERBOSE is not set -CONFIG_IRQ_CPU=y -# CONFIG_LEDS_ALIX is not set -# CONFIG_LEDS_GPIO is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_LLC2 is not set -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_MACH_VR41XX is not set -CONFIG_MIPS=y -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_COBALT is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_MIPS_MALTA is not set -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_MIPS_SIM is not set -CONFIG_MTD=y -# CONFIG_MTD_ABSENT is not set -CONFIG_MTD_BCM47XX=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_MTD_BLOCK2MTD is not set -CONFIG_MTD_CFI=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -CONFIG_MTD_CHAR=y -# CONFIG_MTD_CMDLINE_PARTS is not set -CONFIG_MTD_COMPLEX_MAPPINGS=y -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_ONENAND is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_PCI is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_PLATRAM is not set -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -CONFIG_NETDEV_1000=y -# CONFIG_NET_EMATCH is not set -# CONFIG_NET_IPGRE_BROADCAST is not set -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_SCH_NETEM is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NO_IOPORT is not set -# CONFIG_PAGE_SIZE_16KB is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_64KB is not set -# CONFIG_PAGE_SIZE_8KB is not set -CONFIG_PCI=y -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_SYNC_TTY is not set -# CONFIG_PROC_KCORE is not set -# CONFIG_RTC is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_MULTI_LUN is not set -CONFIG_SCSI_WAIT_SCAN=m -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -CONFIG_SERIAL_8250_EXTENDED=y -# CONFIG_SERIAL_8250_MANY_PORTS is not set -# CONFIG_SERIAL_8250_RSA is not set -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SSB=y -CONFIG_SSB_DEBUG=y -CONFIG_SSB_DRIVER_EXTIF=y -# CONFIG_SSB_DRIVER_GIGE is not set -CONFIG_SSB_DRIVER_MIPS=y -CONFIG_SSB_DRIVER_PCICORE=y -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_EMBEDDED=y -CONFIG_SSB_PCICORE_HOSTMODE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_POSSIBLE=y -CONFIG_SSB_SERIAL=y -# CONFIG_SSB_SILENT is not set -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -# CONFIG_TC35815 is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_TRAD_SIGNALS=y -CONFIG_USB=m -# CONFIG_USB_CATC is not set -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_SPLIT_ISO=y -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set -# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_SSB=y -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_SERIAL_OTI6858 is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_USBAT is not set -CONFIG_USB_UHCI_HCD=m -# CONFIG_USER_NS is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_WATCHDOG is not set -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/Makefile b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/Makefile deleted file mode 100644 index f80945c8b9..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for the BCM47xx specific kernel interface routines -# under Linux. -# - -obj-y := irq.o prom.o setup.o time.o -obj-y += nvram.o cfe_env.o diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/cfe_env.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/cfe_env.c deleted file mode 100644 index c1d5eeef59..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/cfe_env.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * CFE environment variable access - * - * Copyright 2001-2003, Broadcom Corporation - * Copyright 2006, Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include - -#define NVRAM_SIZE (0x1ff0) -static char _nvdata[NVRAM_SIZE]; -static char _valuestr[256]; - -/* - * TLV types. These codes are used in the "type-length-value" - * encoding of the items stored in the NVRAM device (flash or EEPROM) - * - * The layout of the flash/nvram is as follows: - * - * - * - * The type code of "ENV_TLV_TYPE_END" marks the end of the list. - * The "length" field marks the length of the data section, not - * including the type and length fields. - * - * Environment variables are stored as follows: - * - * = - * - * If bit 0 (low bit) is set, the length is an 8-bit value. - * If bit 0 (low bit) is clear, the length is a 16-bit value - * - * Bit 7 set indicates "user" TLVs. In this case, bit 0 still - * indicates the size of the length field. - * - * Flags are from the constants below: - * - */ -#define ENV_LENGTH_16BITS 0x00 /* for low bit */ -#define ENV_LENGTH_8BITS 0x01 - -#define ENV_TYPE_USER 0x80 - -#define ENV_CODE_SYS(n,l) (((n)<<1)|(l)) -#define ENV_CODE_USER(n,l) ((((n)<<1)|(l)) | ENV_TYPE_USER) - -/* - * The actual TLV types we support - */ - -#define ENV_TLV_TYPE_END 0x00 -#define ENV_TLV_TYPE_ENV ENV_CODE_SYS(0,ENV_LENGTH_8BITS) - -/* - * Environment variable flags - */ - -#define ENV_FLG_NORMAL 0x00 /* normal read/write */ -#define ENV_FLG_BUILTIN 0x01 /* builtin - not stored in flash */ -#define ENV_FLG_READONLY 0x02 /* read-only - cannot be changed */ - -#define ENV_FLG_MASK 0xFF /* mask of attributes we keep */ -#define ENV_FLG_ADMIN 0x100 /* lets us internally override permissions */ - - -/* ********************************************************************* - * _nvram_read(buffer,offset,length) - * - * Read data from the NVRAM device - * - * Input parameters: - * buffer - destination buffer - * offset - offset of data to read - * length - number of bytes to read - * - * Return value: - * number of bytes read, or <0 if error occured - ********************************************************************* */ -static int -_nvram_read(unsigned char *nv_buf, unsigned char *buffer, int offset, int length) -{ - int i; - if (offset > NVRAM_SIZE) - return -1; - - for ( i = 0; i < length; i++) { - buffer[i] = ((volatile unsigned char*)nv_buf)[offset + i]; - } - return length; -} - - -static char* -_strnchr(const char *dest,int c,size_t cnt) -{ - while (*dest && (cnt > 0)) { - if (*dest == c) return (char *) dest; - dest++; - cnt--; - } - return NULL; -} - - - -/* - * Core support API: Externally visible. - */ - -/* - * Get the value of an NVRAM variable - * @param name name of variable to get - * @return value of variable or NULL if undefined - */ - -char* -cfe_env_get(unsigned char *nv_buf, char* name) -{ - int size; - unsigned char *buffer; - unsigned char *ptr; - unsigned char *envval; - unsigned int reclen; - unsigned int rectype; - int offset; - int flg; - - if (!strcmp(name, "nvram_type")) - return "cfe"; - - size = NVRAM_SIZE; - buffer = &_nvdata[0]; - - ptr = buffer; - offset = 0; - - /* Read the record type and length */ - if (_nvram_read(nv_buf, ptr,offset,1) != 1) { - goto error; - } - - while ((*ptr != ENV_TLV_TYPE_END) && (size > 1)) { - - /* Adjust pointer for TLV type */ - rectype = *(ptr); - offset++; - size--; - - /* - * Read the length. It can be either 1 or 2 bytes - * depending on the code - */ - if (rectype & ENV_LENGTH_8BITS) { - /* Read the record type and length - 8 bits */ - if (_nvram_read(nv_buf, ptr,offset,1) != 1) { - goto error; - } - reclen = *(ptr); - size--; - offset++; - } - else { - /* Read the record type and length - 16 bits, MSB first */ - if (_nvram_read(nv_buf, ptr,offset,2) != 2) { - goto error; - } - reclen = (((unsigned int) *(ptr)) << 8) + (unsigned int) *(ptr+1); - size -= 2; - offset += 2; - } - - if (reclen > size) - break; /* should not happen, bad NVRAM */ - - switch (rectype) { - case ENV_TLV_TYPE_ENV: - /* Read the TLV data */ - if (_nvram_read(nv_buf, ptr,offset,reclen) != reclen) - goto error; - flg = *ptr++; - envval = (unsigned char *) _strnchr(ptr,'=',(reclen-1)); - if (envval) { - *envval++ = '\0'; - memcpy(_valuestr,envval,(reclen-1)-(envval-ptr)); - _valuestr[(reclen-1)-(envval-ptr)] = '\0'; -#if 0 - printk(KERN_INFO "NVRAM:%s=%s\n", ptr, _valuestr); -#endif - if(!strcmp(ptr, name)){ - return _valuestr; - } - if((strlen(ptr) > 1) && !strcmp(&ptr[1], name)) - return _valuestr; - } - break; - - default: - /* Unknown TLV type, skip it. */ - break; - } - - /* - * Advance to next TLV - */ - - size -= (int)reclen; - offset += reclen; - - /* Read the next record type */ - ptr = buffer; - if (_nvram_read(nv_buf, ptr,offset,1) != 1) - goto error; - } - -error: - return NULL; - -} - diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/include/nvram.h b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/include/nvram.h deleted file mode 100644 index 6bb18e8e5f..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/include/nvram.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2006 Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __NVRAM_H -#define __NVRAM_H - -struct nvram_header { - u32 magic; - u32 len; - u32 crc_ver_init; /* 0:7 crc, 8:15 ver, 16:31 sdram_init */ - u32 config_refresh; /* 0:15 sdram_config, 16:31 sdram_refresh */ - u32 config_ncdl; /* ncdl values for memc */ -}; - -struct nvram_tuple { - char *name; - char *value; - struct nvram_tuple *next; -}; - -#define NVRAM_HEADER 0x48534C46 /* 'FLSH' */ -#define NVRAM_VERSION 1 -#define NVRAM_HEADER_SIZE 20 -#define NVRAM_SPACE 0x8000 - -#define NVRAM_MAX_VALUE_LEN 255 -#define NVRAM_MAX_PARAM_LEN 64 - -char *nvram_get(const char *name); - -#endif diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/irq.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/irq.c deleted file mode 100644 index d707894353..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/irq.c +++ /dev/null @@ -1,86 +0,0 @@ -/* - * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * Copyright (C) 2008 Michael Buesch - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - - -extern struct ssb_bus ssb; - - -void plat_irq_dispatch(void) -{ - u32 cause; - - cause = read_c0_cause() & read_c0_status() & CAUSEF_IP; - - clear_c0_status(cause); - - if (cause & CAUSEF_IP7) - do_IRQ(7); - if (cause & CAUSEF_IP2) - do_IRQ(2); - if (cause & CAUSEF_IP3) - do_IRQ(3); - if (cause & CAUSEF_IP4) - do_IRQ(4); - if (cause & CAUSEF_IP5) - do_IRQ(5); - if (cause & CAUSEF_IP6) - do_IRQ(6); -} - -void __init arch_init_irq(void) -{ - mips_cpu_irq_init(); -} - -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - int res; - - res = ssb_pcibios_map_irq(dev, slot, pin); - if (res < 0) { - printk(KERN_ALERT "PCI: Failed to map IRQ of device %s\n", - dev->dev.bus_id); - return 0; - } - /* IRQ-0 and IRQ-1 are software interrupts. */ - WARN_ON((res == 0) || (res == 1)); - - return res; -} diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/nvram.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/nvram.c deleted file mode 100644 index 3f32ad9d6e..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/nvram.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * BCM947xx nvram variable access - * - * Copyright 2005, Broadcom Corporation - * Copyright 2006, Felix Fietkau - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define MB * 1048576 -extern struct ssb_bus ssb; - -static char nvram_buf[NVRAM_SPACE]; -static int cfe_env; -extern char *cfe_env_get(char *nv_buf, const char *name); - -/* Probe for NVRAM header */ -static void __init early_nvram_init(void) -{ - struct ssb_mipscore *mcore = &ssb.mipscore; - struct nvram_header *header; - int i; - u32 base, lim, off; - u32 *src, *dst; - - base = mcore->flash_window; - lim = mcore->flash_window_size; - cfe_env = 0; - - - /* XXX: hack for supporting the CFE environment stuff on WGT634U */ - if (lim >= 8 MB) { - src = (u32 *) KSEG1ADDR(base + 8 MB - 0x2000); - dst = (u32 *) nvram_buf; - - if ((*src & 0xff00ff) == 0x000001) { - printk("early_nvram_init: WGT634U NVRAM found.\n"); - - for (i = 0; i < 0x1ff0; i++) { - if (*src == 0xFFFFFFFF) - break; - *dst++ = *src++; - } - cfe_env = 1; - return; - } - } - - off = 0x20000; - while (off <= lim) { - /* Windowed flash access */ - header = (struct nvram_header *) KSEG1ADDR(base + off - NVRAM_SPACE); - if (header->magic == NVRAM_HEADER) - goto found; - off <<= 1; - } - - /* Try embedded NVRAM at 4 KB and 1 KB as last resorts */ - header = (struct nvram_header *) KSEG1ADDR(base + 4096); - if (header->magic == NVRAM_HEADER) - goto found; - - header = (struct nvram_header *) KSEG1ADDR(base + 1024); - if (header->magic == NVRAM_HEADER) - goto found; - - return; - -found: - src = (u32 *) header; - dst = (u32 *) nvram_buf; - for (i = 0; i < sizeof(struct nvram_header); i += 4) - *dst++ = *src++; - for (; i < header->len && i < NVRAM_SPACE; i += 4) - *dst++ = le32_to_cpu(*src++); -} - -char *nvram_get(const char *name) -{ - char *var, *value, *end, *eq; - - if (!name) - return NULL; - - if (!nvram_buf[0]) - early_nvram_init(); - - if (cfe_env) - return cfe_env_get(nvram_buf, name); - - /* Look for name=value and return value */ - var = &nvram_buf[sizeof(struct nvram_header)]; - end = nvram_buf + sizeof(nvram_buf) - 2; - end[0] = end[1] = '\0'; - for (; *var; var = value + strlen(value) + 1) { - if (!(eq = strchr(var, '='))) - break; - value = eq + 1; - if ((eq - var) == strlen(name) && strncmp(var, name, (eq - var)) == 0) - return value; - } - - return NULL; -} - -EXPORT_SYMBOL(nvram_get); diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/prom.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/prom.c deleted file mode 100644 index 41ea0870b7..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/prom.c +++ /dev/null @@ -1,61 +0,0 @@ -/* - * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include - -#include -#include -#include -#include "../cfe/cfe_private.h" - -const char *get_system_type(void) -{ - return "Broadcom BCM47xx"; -} - -void __init prom_init(void) -{ - unsigned long mem; - - mips_machgroup = MACH_GROUP_BRCM; - mips_machtype = MACH_BCM47XX; - - cfe_setup(fw_arg0, fw_arg1, fw_arg2, fw_arg3); - - /* Figure out memory size by finding aliases */ - for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) { - if (*(unsigned long *)((unsigned long)(prom_init) + mem) == - *(unsigned long *)(prom_init)) - break; - } - - add_memory_region(0, mem, BOOT_MEM_RAM); -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/setup.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/setup.c deleted file mode 100644 index 41d7b0b758..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/setup.c +++ /dev/null @@ -1,246 +0,0 @@ -/* - * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * Copyright (C) 2005 Waldemar Brodkorb - * Copyright (C) 2006 Felix Fietkau - * Copyright (C) 2006-2008 Michael Buesch - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -extern void bcm47xx_pci_init(void); -extern void bcm47xx_time_init(void); - -struct ssb_bus ssb; - - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - int err; - - err = ssb_pcibios_plat_dev_init(dev); - if (err) { - printk(KERN_ALERT "PCI: Failed to init device %s\n", - pci_name(dev)); - } - - return err; -} - -static void bcm47xx_machine_restart(char *command) -{ - printk(KERN_ALERT "Please stand by while rebooting the system...\n"); - local_irq_disable(); - /* CFE has a reboot callback, but that does not work. - * Oopses with: Reserved instruction in kernel code. - */ - - /* Set the watchdog timer to reset immediately */ - if (ssb_watchdog_timer_set(&ssb, 1)) - printk(KERN_EMERG "SSB watchdog-triggered reboot failed!\n"); - while (1) - cpu_relax(); -} - -static void bcm47xx_machine_halt(void) -{ - /* Disable interrupts and watchdog and spin forever */ - local_irq_disable(); - if (ssb_watchdog_timer_set(&ssb, 0)) - printk(KERN_EMERG "Failed to disable SSB watchdog!\n"); - while (1) - cpu_relax(); -} - -static void e_aton(char *str, char *dest) -{ - int i = 0; - - if (str == NULL) { - memset(dest, 0, 6); - return; - } - - for (;;) { - dest[i++] = (char) simple_strtoul(str, NULL, 16); - str += 2; - if (!*str++ || i == 6) - break; - } -} - -static void bcm47xx_fill_sprom(struct ssb_sprom *sprom) -{ - char *s; - - memset(sprom, 0xFF, sizeof(struct ssb_sprom)); - - sprom->revision = 1; - if ((s = nvram_get("il0macaddr"))) - e_aton(s, sprom->il0mac); - if ((s = nvram_get("et0macaddr"))) - e_aton(s, sprom->et0mac); - if ((s = nvram_get("et1macaddr"))) - e_aton(s, sprom->et1mac); - if ((s = nvram_get("et0phyaddr"))) - sprom->et0phyaddr = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("et1phyaddr"))) - sprom->et1phyaddr = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("et0mdcport"))) - sprom->et0mdcport = !!simple_strtoul(s, NULL, 10); - if ((s = nvram_get("et1mdcport"))) - sprom->et1mdcport = !!simple_strtoul(s, NULL, 10); - if ((s = nvram_get("pa0b0"))) - sprom->pa0b0 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa0b1"))) - sprom->pa0b1 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa0b2"))) - sprom->pa0b2 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa1b0"))) - sprom->pa1b0 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa1b1"))) - sprom->pa1b1 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa1b2"))) - sprom->pa1b2 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("wl0gpio0"))) - sprom->gpio0 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("wl0gpio1"))) - sprom->gpio1 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("wl0gpio2"))) - sprom->gpio2 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("wl0gpio3"))) - sprom->gpio3 = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa0maxpwr"))) - sprom->maxpwr_bg = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa1maxpwr"))) - sprom->maxpwr_a = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa0itssit"))) - sprom->itssi_bg = simple_strtoul(s, NULL, 0); - if ((s = nvram_get("pa1itssit"))) - sprom->itssi_a = simple_strtoul(s, NULL, 0); - sprom->boardflags_lo = 0; - if ((s = nvram_get("boardflags"))) - sprom->boardflags_lo = simple_strtoul(s, NULL, 0); - sprom->boardflags_hi = 0; - if ((s = nvram_get("boardflags2"))) - sprom->boardflags_hi = simple_strtoul(s, NULL, 0); -} - -static int bcm47xx_get_invariants(struct ssb_bus *bus, struct ssb_init_invariants *iv) -{ - char *s; - - iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM; - if ((s = nvram_get("boardtype"))) - iv->boardinfo.type = (u16)simple_strtoul(s, NULL, 0); - if ((s = nvram_get("boardrev"))) - iv->boardinfo.rev = (u16)simple_strtoul(s, NULL, 0); - - bcm47xx_fill_sprom(&iv->sprom); - - if ((s = nvram_get("cardbus"))) - iv->has_cardbus_slot = !!simple_strtoul(s, NULL, 10); - - return 0; -} - -void __init plat_mem_setup(void) -{ - int i, err; - char *s; - struct ssb_mipscore *mcore; - - err = ssb_bus_ssbbus_register(&ssb, SSB_ENUM_BASE, bcm47xx_get_invariants); - if (err) { - const char *msg = "Failed to initialize SSB bus (err %d)\n"; - cfe_printk(msg, err); /* Make sure the message gets out of the box. */ - panic(msg, err); - } - mcore = &ssb.mipscore; - - s = nvram_get("kernel_args"); - if (s && !strncmp(s, "console=ttyS1", 13)) { - struct ssb_serial_port port; - - cfe_printk("Swapping serial ports!\n"); - /* swap serial ports */ - memcpy(&port, &mcore->serial_ports[0], sizeof(port)); - memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1], sizeof(port)); - memcpy(&mcore->serial_ports[1], &port, sizeof(port)); - } - - for (i = 0; i < mcore->nr_serial_ports; i++) { - struct ssb_serial_port *port = &(mcore->serial_ports[i]); - struct uart_port s; - - memset(&s, 0, sizeof(s)); - s.line = i; - s.membase = port->regs; - s.irq = port->irq + 2; - s.uartclk = port->baud_base; - s.flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ; - s.iotype = SERIAL_IO_MEM; - s.regshift = port->reg_shift; - - early_serial_setup(&s); - } - cfe_printk("Serial init done.\n"); - - _machine_restart = bcm47xx_machine_restart; - _machine_halt = bcm47xx_machine_halt; - pm_power_off = bcm47xx_machine_halt; - board_time_init = bcm47xx_time_init; -} - -static int __init bcm47xx_register_gpiodev(void) -{ - static struct resource res = { - .start = 0xFFFFFFFF, - }; - struct platform_device *pdev; - - pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); - if (!pdev) { - printk(KERN_ERR "bcm47xx: GPIODEV init failed\n"); - return -ENODEV; - } - - return 0; -} -device_initcall(bcm47xx_register_gpiodev); - -EXPORT_SYMBOL(ssb); diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/time.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/time.c deleted file mode 100644 index 62120ebc74..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/bcm947xx/time.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -extern struct ssb_bus ssb; - -void __init -bcm47xx_time_init(void) -{ - unsigned long hz; - - /* - * Use deterministic values for initial counter interrupt - * so that calibrate delay avoids encountering a counter wrap. - */ - write_c0_count(0); - write_c0_compare(0xffff); - - hz = ssb_cpu_clock(&ssb.mipscore) / 2; - if (!hz) - hz = 100000000; - - /* Set MIPS counter frequency for fixed_rate_gettimeoffset() */ - mips_hpt_frequency = hz; -} - -void __init -plat_timer_setup(struct irqaction *irq) -{ - /* Enable the timer interrupt */ - setup_irq(7, irq); -} diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/Makefile b/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/Makefile deleted file mode 100644 index d9f046adf3..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the Broadcom Common Firmware Environment support -# - -obj-y += cfe.o diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe.c b/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe.c deleted file mode 100644 index 6d16111e1c..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe.c +++ /dev/null @@ -1,533 +0,0 @@ -/* - * Broadcom Common Firmware Environment (CFE) support - * - * Copyright 2000, 2001, 2002 - * Broadcom Corporation. All rights reserved. - * - * Copyright (C) 2006 Michael Buesch - * - * Original Authors: Mitch Lichtenberg, Chris Demetriou - * - * This software is furnished under license and may be used and copied only - * in accordance with the following terms and conditions. Subject to these - * conditions, you may download, copy, install, use, modify and distribute - * modified or unmodified copies of this software in source and/or binary - * form. No title or ownership is transferred hereby. - * - * 1) Any source code used, modified or distributed must reproduce and - * retain this copyright notice and list of conditions as they appear in - * the source file. - * - * 2) No right is granted to use any trade name, trademark, or logo of - * Broadcom Corporation. The "Broadcom Corporation" name may not be - * used to endorse or promote products derived from this software - * without the prior written permission of Broadcom Corporation. - * - * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR - * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE - * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE - * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include -#include -#include -#include -#include - -#include "cfe_private.h" - - -static cfe_uint_t cfe_handle; -static int (*cfe_trampoline)(long handle, long iocb); - - -#include - -void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1, - unsigned long fwarg2, unsigned long fwarg3) -{ - if (fwarg3 == 0x80300000) { - /* WRT54G workaround */ - fwarg3 = CFE_EPTSEAL; - fwarg2 = 0xBFC00500; - } - if (fwarg3 != CFE_EPTSEAL) { - /* We are not booted from CFE */ - return; - } - if (fwarg1 == 0) { - /* We are on the boot CPU */ - cfe_handle = (cfe_uint_t)fwarg0; - cfe_trampoline = CFE_TO_PTR(fwarg2); - } -} - -int cfe_vprintk(const char *fmt, va_list args) -{ - static char buffer[1024]; - static DEFINE_SPINLOCK(lock); - static const char pfx[] = "CFE-console: "; - static const size_t pfx_len = sizeof(pfx) - 1; - unsigned long flags; - int len, cnt, pos; - int handle; - int res; - - if (!cfe_present()) - return -ENODEV; - - spin_lock_irqsave(&lock, flags); - handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); - if (CFE_ISERR(handle)) { - len = -EIO; - goto out; - } - strcpy(buffer, pfx); - len = vscnprintf(buffer + pfx_len, - sizeof(buffer) - pfx_len - 2, - fmt, args); - len += pfx_len; - /* The CFE console requires CR-LF line-ends. - * Add a CR, if we only terminate lines with a LF. - * This does only fix CR-LF at the end of the string. - * So for multiple lines, use multiple cfe_vprintk calls. - */ - if (len > 1 && - buffer[len - 1] == '\n' && buffer[len - 2] != '\r') { - buffer[len - 1] = '\r'; - buffer[len] = '\n'; - len += 1; - } - cnt = len; - pos = 0; - while (cnt > 0) { - res = cfe_write(handle, buffer + pos, len - pos); - if (CFE_ISERR(res)) { - len = -EIO; - goto out; - } - cnt -= res; - pos += res; - } -out: - spin_unlock_irqrestore(&lock, flags); - - return len; -} - -int cfe_printk(const char *fmt, ...) -{ - va_list args; - int res; - - va_start(args, fmt); - res = cfe_vprintk(fmt, args); - va_end(args); - - return res; -} - -static int cfe_iocb_dispatch(struct cfe_iocb *iocb) -{ - if (!cfe_present()) - return CFE_ERR_UNSUPPORTED; - return cfe_trampoline((long)cfe_handle, (long)iocb); -} - -int cfe_present(void) -{ - return (cfe_trampoline != NULL); -} - -int cfe_close(int handle) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_CLOSE; - iocb.handle = handle; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_FW_CPUCTL; - iocb.psize = sizeof(struct cfe_iocb_cpuctl); - iocb.cpuctl.number = cpu; - iocb.cpuctl.command = CFE_CPU_CMD_START; - iocb.cpuctl.gp = gp; - iocb.cpuctl.sp = sp; - iocb.cpuctl.a1 = a1; - iocb.cpuctl.start_addr = (long)fn; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_cpu_stop(int cpu) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_FW_CPUCTL; - iocb.psize = sizeof(struct cfe_iocb_cpuctl); - iocb.cpuctl.number = cpu; - iocb.cpuctl.command = CFE_CPU_CMD_STOP; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_ENV_ENUM; - iocb.psize = sizeof(struct cfe_iocb_envbuf); - iocb.envbuf.index = idx; - iocb.envbuf.name = PTR_TO_CFE(name); - iocb.envbuf.name_len = namelen; - iocb.envbuf.val = PTR_TO_CFE(val); - iocb.envbuf.val_len = vallen; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_enumdev(int idx, char *name, int namelen) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - - iocb.fcode = CFE_CMD_DEV_ENUM; - iocb.psize = sizeof(struct cfe_iocb_envbuf); - iocb.envbuf.index = idx; - iocb.envbuf.name = PTR_TO_CFE(name); - iocb.envbuf.name_len = namelen; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_enummem(int idx, int flags, u64 *start, u64 *length, - u64 *type) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - - iocb.fcode = CFE_CMD_FW_MEMENUM; - iocb.flags = flags; - iocb.psize = sizeof(struct cfe_iocb_meminfo); - iocb.meminfo.index = idx; - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (!CFE_ISERR(iocb.status)) { - *start = iocb.meminfo.addr; - *length = iocb.meminfo.size; - *type = iocb.meminfo.type; - } - - return iocb.status; -} - -int cfe_exit(int warm, int status) -{ - struct cfe_iocb iocb; - int err; - -printk("CFE REBOOT\n"); - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_FW_RESTART; - if (warm) - iocb.flags = CFE_FLG_WARMSTART; - iocb.psize = sizeof(struct cfe_iocb_exitstat); - iocb.exitstat.status = status; - -printk("CALL\n"); - err = cfe_iocb_dispatch(&iocb); -printk("DONE\n"); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_flushcache(int flags) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_FW_FLUSHCACHE; - iocb.flags = flags; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_getdevinfo(char *name) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_GETINFO; - iocb.psize = sizeof(struct cfe_iocb_buf); - iocb.buffer.ptr = PTR_TO_CFE(name); - iocb.buffer.length = strlen(name); - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - - return iocb.buffer.devflags; -} - -int cfe_getenv(char *name, char *dest, int destlen) -{ - struct cfe_iocb iocb; - int err; - - dest[0] = '\0'; - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_ENV_GET; - iocb.psize = sizeof(struct cfe_iocb_envbuf); - iocb.envbuf.name = PTR_TO_CFE(name); - iocb.envbuf.name_len = strlen(name); - iocb.envbuf.val = PTR_TO_CFE(dest); - iocb.envbuf.val_len = destlen; - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_getfwinfo(struct cfe_fwinfo *info) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_FW_GETINFO; - iocb.psize = sizeof(struct cfe_iocb_fwinfo); - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return err; - - info->version = iocb.fwinfo.version; - info->totalmem = iocb.fwinfo.totalmem; - info->flags = iocb.fwinfo.flags; - info->boardid = iocb.fwinfo.boardid; - info->bootarea_va = iocb.fwinfo.bootarea_va; - info->bootarea_pa = iocb.fwinfo.bootarea_pa; - info->bootarea_size = iocb.fwinfo.bootarea_size; - - return iocb.status; -} - -int cfe_getstdhandle(int handletype) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_GETHANDLE; - iocb.flags = handletype; - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - - return iocb.handle; -} - -int cfe_getticks(s64 *ticks) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_FW_GETTIME; - iocb.psize = sizeof(struct cfe_iocb_time); - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (!CFE_ISERR(iocb.status)) - *ticks = iocb.time.ticks; - - return iocb.status; -} - -int cfe_inpstat(int handle) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_INPSTAT; - iocb.handle = handle; - iocb.psize = sizeof(struct cfe_iocb_inpstat); - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - - return iocb.inpstat.status; -} - -int cfe_ioctl(int handle, unsigned int ioctlnum, - unsigned char *buffer, int length, - int *retlen, u64 offset) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_IOCTL; - iocb.handle = handle; - iocb.psize = sizeof(struct cfe_iocb_buf); - iocb.buffer.offset = offset; - iocb.buffer.ioctlcmd = ioctlnum; - iocb.buffer.ptr = PTR_TO_CFE(buffer); - iocb.buffer.length = length; - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - if (retlen) - *retlen = iocb.buffer.retlen; - - return iocb.status; -} - -int cfe_open(char *name) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_OPEN; - iocb.psize = sizeof(struct cfe_iocb_buf); - iocb.buffer.ptr = PTR_TO_CFE(name); - iocb.buffer.length = strlen(name); - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - - return iocb.handle; -} - -int cfe_read(int handle, unsigned char *buffer, int length) -{ - return cfe_readblk(handle, 0, buffer, length); -} - -int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_READ; - iocb.handle = handle; - iocb.psize = sizeof(struct cfe_iocb_buf); - iocb.buffer.offset = offset; - iocb.buffer.ptr = PTR_TO_CFE(buffer); - iocb.buffer.length = length; - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - - return iocb.buffer.retlen; -} - -int cfe_setenv(char *name, char *val) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_ENV_SET; - iocb.psize = sizeof(struct cfe_iocb_envbuf); - iocb.envbuf.name = PTR_TO_CFE(name); - iocb.envbuf.name_len = strlen(name); - iocb.envbuf.val = PTR_TO_CFE(val); - iocb.envbuf.val_len = strlen(val); - - err = cfe_iocb_dispatch(&iocb); - - return (CFE_ISERR(err)) ? err : iocb.status; -} - -int cfe_write(int handle, unsigned char *buffer, int length) -{ - return cfe_writeblk(handle, 0, buffer, length); -} - -int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, int length) -{ - struct cfe_iocb iocb; - int err; - - memset(&iocb, 0, sizeof(iocb)); - iocb.fcode = CFE_CMD_DEV_WRITE; - iocb.handle = handle; - iocb.psize = sizeof(struct cfe_iocb_buf); - iocb.buffer.offset = offset; - iocb.buffer.ptr = PTR_TO_CFE(buffer); - iocb.buffer.length = length; - - err = cfe_iocb_dispatch(&iocb); - if (CFE_ISERR(err)) - return err; - if (CFE_ISERR(iocb.status)) - return iocb.status; - - return iocb.buffer.retlen; -} diff --git a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe_private.h b/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe_private.h deleted file mode 100644 index 0a604d3bbd..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/arch/mips/cfe/cfe_private.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Broadcom Common Firmware Environment (CFE) support - * - * Copyright 2000, 2001, 2002 - * Broadcom Corporation. All rights reserved. - * - * Copyright (C) 2006 Michael Buesch - * - * Original Authors: Mitch Lichtenberg, Chris Demetriou - * - * This software is furnished under license and may be used and copied only - * in accordance with the following terms and conditions. Subject to these - * conditions, you may download, copy, install, use, modify and distribute - * modified or unmodified copies of this software in source and/or binary - * form. No title or ownership is transferred hereby. - * - * 1) Any source code used, modified or distributed must reproduce and - * retain this copyright notice and list of conditions as they appear in - * the source file. - * - * 2) No right is granted to use any trade name, trademark, or logo of - * Broadcom Corporation. The "Broadcom Corporation" name may not be - * used to endorse or promote products derived from this software - * without the prior written permission of Broadcom Corporation. - * - * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR - * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE - * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE - * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef LINUX_CFE_PRIVATE_H_ -#define LINUX_CFE_PRIVATE_H_ - -#ifndef __ASSEMBLY__ - -/* Seal indicating CFE's presence, passed to the kernel. */ -#define CFE_EPTSEAL 0x43464531 - -#define CFE_CMD_FW_GETINFO 0 -#define CFE_CMD_FW_RESTART 1 -#define CFE_CMD_FW_BOOT 2 -#define CFE_CMD_FW_CPUCTL 3 -#define CFE_CMD_FW_GETTIME 4 -#define CFE_CMD_FW_MEMENUM 5 -#define CFE_CMD_FW_FLUSHCACHE 6 - -#define CFE_CMD_DEV_GETHANDLE 9 -#define CFE_CMD_DEV_ENUM 10 -#define CFE_CMD_DEV_OPEN 11 -#define CFE_CMD_DEV_INPSTAT 12 -#define CFE_CMD_DEV_READ 13 -#define CFE_CMD_DEV_WRITE 14 -#define CFE_CMD_DEV_IOCTL 15 -#define CFE_CMD_DEV_CLOSE 16 -#define CFE_CMD_DEV_GETINFO 17 - -#define CFE_CMD_ENV_ENUM 20 -#define CFE_CMD_ENV_GET 22 -#define CFE_CMD_ENV_SET 23 -#define CFE_CMD_ENV_DEL 24 - -#define CFE_CMD_MAX 32 - -#define CFE_CMD_VENDOR_USE 0x8000 /* codes above this are for customer use */ - -typedef u64 cfe_uint_t; -typedef s64 cfe_int_t; -typedef s64 cfe_ptr_t; - -/* Cast a pointer from native to CFE-API pointer and back */ -#define CFE_TO_PTR(p) ((void *)(unsigned long)(p)) -#define PTR_TO_CFE(p) ((cfe_ptr_t)(unsigned long)(p)) - -struct cfe_iocb_buf { - cfe_uint_t offset; /* offset on device (bytes) */ - cfe_ptr_t ptr; /* pointer to a buffer */ - cfe_uint_t length; /* length of this buffer */ - cfe_uint_t retlen; /* returned length (for read ops) */ - union { - cfe_uint_t ioctlcmd; /* IOCTL command (used only for IOCTLs) */ - cfe_uint_t devflags; /* Returned device info flags */ - }; -}; - -struct cfe_iocb_inpstat { - cfe_uint_t status; /* 1 means input available */ -}; - -struct cfe_iocb_envbuf { - cfe_int_t index; /* 0-based enumeration index */ - cfe_ptr_t name; /* name string buffer */ - cfe_int_t name_len; /* size of name buffer */ - cfe_ptr_t val; /* value string buffer */ - cfe_int_t val_len; /* size of value string buffer */ -}; - -struct cfe_iocb_cpuctl { - cfe_uint_t number; /* cpu number to control */ - cfe_uint_t command; /* command to issue to CPU */ - cfe_uint_t start_addr; /* CPU start address */ - cfe_uint_t gp; /* starting GP value */ - cfe_uint_t sp; /* starting SP value */ - cfe_uint_t a1; /* starting A1 value */ -}; - -struct cfe_iocb_time { - cfe_int_t ticks; /* current time in ticks */ -}; - -struct cfe_iocb_exitstat { - cfe_int_t status; -}; - -struct cfe_iocb_meminfo { - cfe_int_t index; /* 0-based enumeration index */ - cfe_int_t type; /* type of memory block */ - cfe_uint_t addr; /* physical start address */ - cfe_uint_t size; /* block size */ -}; - -struct cfe_iocb_fwinfo { - cfe_int_t version; /* major, minor, eco version */ - cfe_int_t totalmem; /* total installed mem */ - cfe_int_t flags; /* various flags */ - cfe_int_t boardid; /* board ID */ - cfe_int_t bootarea_va; /* VA of boot area */ - cfe_int_t bootarea_pa; /* PA of boot area */ - cfe_int_t bootarea_size; /* size of boot area */ - cfe_int_t reserved1; - cfe_int_t reserved2; - cfe_int_t reserved3; -}; - -/* CFE I/O Control Block */ -struct cfe_iocb { - cfe_uint_t fcode; /* IOCB function code */ - cfe_int_t status; /* return status */ - cfe_int_t handle; /* file/device handle */ - cfe_uint_t flags; /* flags for this IOCB */ - cfe_uint_t psize; /* size of parameter list */ - union { - struct cfe_iocb_buf buffer; /* buffer parameters */ - struct cfe_iocb_inpstat inpstat; /* input status parameters */ - struct cfe_iocb_envbuf envbuf; /* environment function parameters */ - struct cfe_iocb_cpuctl cpuctl; /* CPU control parameters */ - struct cfe_iocb_time time; /* timer parameters */ - struct cfe_iocb_meminfo meminfo; /* memory arena info parameters */ - struct cfe_iocb_fwinfo fwinfo; /* firmware information */ - struct cfe_iocb_exitstat exitstat; /* Exit Status */ - }; -}; - - -#include - -void __init cfe_setup(unsigned long fwarg0, unsigned long fwarg1, - unsigned long fwarg2, unsigned long fwarg3); - -#else /* __ASSEMBLY__ */ - - .macro cfe_early_init -#ifdef CONFIG_CFE - jal cfe_setup -#endif - .endm - -#endif /* __ASSEMBLY__ */ -#endif /* LINUX_CFE_PRIVATE_H_ */ diff --git a/target/linux/brcm47xx/files-2.6.23/drivers/mtd/maps/bcm47xx-flash.c b/target/linux/brcm47xx/files-2.6.23/drivers/mtd/maps/bcm47xx-flash.c deleted file mode 100644 index 6a82f362c6..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/drivers/mtd/maps/bcm47xx-flash.c +++ /dev/null @@ -1,439 +0,0 @@ -/* - * Copyright (C) 2006 Felix Fietkau - * Copyright (C) 2005 Waldemar Brodkorb - * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) - * - * original functions for finding root filesystem from Mike Baker - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Copyright 2001-2003, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * Flash mapping for BCM947XX boards - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#ifdef CONFIG_MTD_PARTITIONS -#include -#endif -#include -#ifdef CONFIG_SSB -#include -#endif -#include - - -#define TRX_MAGIC 0x30524448 /* "HDR0" */ -#define TRX_VERSION 1 -#define TRX_MAX_LEN 0x3A0000 -#define TRX_NO_HEADER 1 /* Do not write TRX header */ -#define TRX_GZ_FILES 0x2 /* Contains up to TRX_MAX_OFFSET individual gzip files */ -#define TRX_MAX_OFFSET 3 - -struct trx_header { - u32 magic; /* "HDR0" */ - u32 len; /* Length of file including header */ - u32 crc32; /* 32-bit CRC from flag_version to end of file */ - u32 flag_version; /* 0:15 flags, 16:31 version */ - u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions from start of header */ -}; - -#define ROUNDUP(x, y) ((((x)+((y)-1))/(y))*(y)) -#define NVRAM_SPACE 0x8000 -#define WINDOW_ADDR 0x1fc00000 -#define WINDOW_SIZE 0x400000 -#define BUSWIDTH 2 - -#ifdef CONFIG_SSB -extern struct ssb_bus ssb; -#endif -static struct mtd_info *bcm947xx_mtd; - -static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) -{ - if (len==1) { - memcpy_fromio(to, map->virt + from, len); - } else { - int i; - u16 *dest = (u16 *) to; - u16 *src = (u16 *) (map->virt + from); - for (i = 0; i < (len / 2); i++) { - dest[i] = src[i]; - } - if (len & 1) - *((u8 *)dest+len-1) = src[i] & 0xff; - } -} - -static struct map_info bcm947xx_map = { - name: "Physically mapped flash", - size: WINDOW_SIZE, - bankwidth: BUSWIDTH, - phys: WINDOW_ADDR, -}; - -#ifdef CONFIG_MTD_PARTITIONS - -static struct mtd_partition bcm947xx_parts[] = { - { name: "cfe", offset: 0, size: 0, mask_flags: MTD_WRITEABLE, }, - { name: "linux", offset: 0, size: 0, }, - { name: "rootfs", offset: 0, size: 0, }, - { name: "nvram", offset: 0, size: 0, }, - { name: NULL, }, -}; - -static int __init -find_cfe_size(struct mtd_info *mtd, size_t size) -{ - struct trx_header *trx; - unsigned char buf[512]; - int off; - size_t len; - int blocksize; - - trx = (struct trx_header *) buf; - - blocksize = mtd->erasesize; - if (blocksize < 0x10000) - blocksize = 0x10000; - - for (off = (128*1024); off < size; off += blocksize) { - memset(buf, 0xe5, sizeof(buf)); - - /* - * Read into buffer - */ - if (mtd->read(mtd, off, sizeof(buf), &len, buf) || - len != sizeof(buf)) - continue; - - /* found a TRX header */ - if (le32_to_cpu(trx->magic) == TRX_MAGIC) { - goto found; - } - } - - printk(KERN_NOTICE - "%s: Couldn't find bootloader size\n", - mtd->name); - return -1; - - found: - printk(KERN_NOTICE "bootloader size: %d\n", off); - return off; - -} - -/* - * Copied from mtdblock.c - * - * Cache stuff... - * - * Since typical flash erasable sectors are much larger than what Linux's - * buffer cache can handle, we must implement read-modify-write on flash - * sectors for each block write requests. To avoid over-erasing flash sectors - * and to speed things up, we locally cache a whole flash sector while it is - * being written to until a different sector is required. - */ - -static void erase_callback(struct erase_info *done) -{ - wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv; - wake_up(wait_q); -} - -static int erase_write (struct mtd_info *mtd, unsigned long pos, - int len, const char *buf) -{ - struct erase_info erase; - DECLARE_WAITQUEUE(wait, current); - wait_queue_head_t wait_q; - size_t retlen; - int ret; - - /* - * First, let's erase the flash block. - */ - - init_waitqueue_head(&wait_q); - erase.mtd = mtd; - erase.callback = erase_callback; - erase.addr = pos; - erase.len = len; - erase.priv = (u_long)&wait_q; - - set_current_state(TASK_INTERRUPTIBLE); - add_wait_queue(&wait_q, &wait); - - ret = mtd->erase(mtd, &erase); - if (ret) { - set_current_state(TASK_RUNNING); - remove_wait_queue(&wait_q, &wait); - printk (KERN_WARNING "erase of region [0x%lx, 0x%x] " - "on \"%s\" failed\n", - pos, len, mtd->name); - return ret; - } - - schedule(); /* Wait for erase to finish. */ - remove_wait_queue(&wait_q, &wait); - - /* - * Next, writhe data to flash. - */ - - ret = mtd->write (mtd, pos, len, &retlen, buf); - if (ret) - return ret; - if (retlen != len) - return -EIO; - return 0; -} - - - - -static int __init -find_root(struct mtd_info *mtd, size_t size, struct mtd_partition *part) -{ - struct trx_header trx, *trx2; - unsigned char buf[512], *block; - int off, blocksize; - u32 i, crc = ~0; - size_t len; - struct squashfs_super_block *sb = (struct squashfs_super_block *) buf; - - blocksize = mtd->erasesize; - if (blocksize < 0x10000) - blocksize = 0x10000; - - for (off = (128*1024); off < size; off += blocksize) { - memset(&trx, 0xe5, sizeof(trx)); - - /* - * Read into buffer - */ - if (mtd->read(mtd, off, sizeof(trx), &len, (char *) &trx) || - len != sizeof(trx)) - continue; - - /* found a TRX header */ - if (le32_to_cpu(trx.magic) == TRX_MAGIC) { - part->offset = le32_to_cpu(trx.offsets[2]) ? : - le32_to_cpu(trx.offsets[1]); - part->size = le32_to_cpu(trx.len); - - part->size -= part->offset; - part->offset += off; - - goto found; - } - } - - printk(KERN_NOTICE - "%s: Couldn't find root filesystem\n", - mtd->name); - return -1; - - found: - if (part->size == 0) - return 0; - - if (mtd->read(mtd, part->offset, sizeof(buf), &len, buf) || len != sizeof(buf)) - return 0; - - /* Move the fs outside of the trx */ - part->size = 0; - - if (trx.len != part->offset + part->size - off) { - /* Update the trx offsets and length */ - trx.len = part->offset + part->size - off; - - /* Update the trx crc32 */ - for (i = (u32) &(((struct trx_header *)NULL)->flag_version); i <= trx.len; i += sizeof(buf)) { - if (mtd->read(mtd, off + i, sizeof(buf), &len, buf) || len != sizeof(buf)) - return 0; - crc = crc32_le(crc, buf, min(sizeof(buf), trx.len - i)); - } - trx.crc32 = crc; - - /* read first eraseblock from the trx */ - block = kmalloc(mtd->erasesize, GFP_KERNEL); - trx2 = (struct trx_header *) block; - if (mtd->read(mtd, off, mtd->erasesize, &len, block) || len != mtd->erasesize) { - printk("Error accessing the first trx eraseblock\n"); - return 0; - } - - printk("Updating TRX offsets and length:\n"); - printk("old trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx2->offsets[0], trx2->offsets[1], trx2->offsets[2], trx2->len, trx2->crc32); - printk("new trx = [0x%08x, 0x%08x, 0x%08x], len=0x%08x crc32=0x%08x\n", trx.offsets[0], trx.offsets[1], trx.offsets[2], trx.len, trx.crc32); - - /* Write updated trx header to the flash */ - memcpy(block, &trx, sizeof(trx)); - if (mtd->unlock) - mtd->unlock(mtd, off, mtd->erasesize); - erase_write(mtd, off, mtd->erasesize, block); - if (mtd->sync) - mtd->sync(mtd); - kfree(block); - printk("Done\n"); - } - - return part->size; -} - -struct mtd_partition * __init -init_mtd_partitions(struct mtd_info *mtd, size_t size) -{ - int cfe_size; - - if ((cfe_size = find_cfe_size(mtd,size)) < 0) - return NULL; - - /* boot loader */ - bcm947xx_parts[0].offset = 0; - bcm947xx_parts[0].size = cfe_size; - - /* nvram */ - if (cfe_size != 384 * 1024) { - bcm947xx_parts[3].offset = size - ROUNDUP(NVRAM_SPACE, mtd->erasesize); - bcm947xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); - } else { - /* nvram (old 128kb config partition on netgear wgt634u) */ - bcm947xx_parts[3].offset = bcm947xx_parts[0].size; - bcm947xx_parts[3].size = ROUNDUP(NVRAM_SPACE, mtd->erasesize); - } - - /* linux (kernel and rootfs) */ - if (cfe_size != 384 * 1024) { - bcm947xx_parts[1].offset = bcm947xx_parts[0].size; - bcm947xx_parts[1].size = bcm947xx_parts[3].offset - - bcm947xx_parts[1].offset; - } else { - /* do not count the elf loader, which is on one block */ - bcm947xx_parts[1].offset = bcm947xx_parts[0].size + - bcm947xx_parts[3].size + mtd->erasesize; - bcm947xx_parts[1].size = size - - bcm947xx_parts[0].size - - (2*bcm947xx_parts[3].size) - - mtd->erasesize; - } - - /* find and size rootfs */ - find_root(mtd,size,&bcm947xx_parts[2]); - bcm947xx_parts[2].size = size - bcm947xx_parts[2].offset - bcm947xx_parts[3].size; - - return bcm947xx_parts; -} -#endif - -int __init init_bcm947xx_map(void) -{ -#ifdef CONFIG_SSB - struct ssb_mipscore *mcore = &ssb.mipscore; -#endif - size_t size; - int ret = 0; -#ifdef CONFIG_MTD_PARTITIONS - struct mtd_partition *parts; - int i; -#endif - -#ifdef CONFIG_SSB - u32 window = mcore->flash_window; - u32 window_size = mcore->flash_window_size; - - printk("flash init: 0x%08x 0x%08x\n", window, window_size); - bcm947xx_map.phys = window; - bcm947xx_map.size = window_size; - bcm947xx_map.virt = ioremap_nocache(window, window_size); -#else - printk("flash init: 0x%08x 0x%08x\n", WINDOW_ADDR, WINDOW_SIZE); - bcm947xx_map.virt = ioremap_nocache(WINDOW_ADDR, WINDOW_SIZE); -#endif - - if (!bcm947xx_map.virt) { - printk("Failed to ioremap\n"); - return -EIO; - } - - simple_map_init(&bcm947xx_map); - - if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) { - printk("Failed to do_map_probe\n"); - iounmap((void *)bcm947xx_map.virt); - return -ENXIO; - } - - /* override copy_from routine */ - bcm947xx_map.copy_from = bcm947xx_map_copy_from; - - bcm947xx_mtd->owner = THIS_MODULE; - - size = bcm947xx_mtd->size; - - printk(KERN_NOTICE "Flash device: 0x%x at 0x%x\n", size, WINDOW_ADDR); - -#ifdef CONFIG_MTD_PARTITIONS - parts = init_mtd_partitions(bcm947xx_mtd, size); - for (i = 0; parts[i].name; i++); - ret = add_mtd_partitions(bcm947xx_mtd, parts, i); - if (ret) { - printk(KERN_ERR "Flash: add_mtd_partitions failed\n"); - goto fail; - } -#endif - return 0; - - fail: - if (bcm947xx_mtd) - map_destroy(bcm947xx_mtd); - if (bcm947xx_map.virt) - iounmap((void *)bcm947xx_map.virt); - bcm947xx_map.virt = 0; - return ret; -} - -void __exit cleanup_bcm947xx_map(void) -{ -#ifdef CONFIG_MTD_PARTITIONS - del_mtd_partitions(bcm947xx_mtd); -#endif - map_destroy(bcm947xx_mtd); - iounmap((void *)bcm947xx_map.virt); -} - -module_init(init_bcm947xx_map); -module_exit(cleanup_bcm947xx_map); diff --git a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/cfe.h b/target/linux/brcm47xx/files-2.6.23/include/asm-mips/cfe.h deleted file mode 100644 index 47c3f5613d..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/cfe.h +++ /dev/null @@ -1,189 +0,0 @@ -/* - * Broadcom Common Firmware Environment (CFE) support - * - * Copyright 2000, 2001, 2002 - * Broadcom Corporation. All rights reserved. - * - * Copyright (C) 2006 Michael Buesch - * - * Original Authors: Mitch Lichtenberg, Chris Demetriou - * - * This software is furnished under license and may be used and copied only - * in accordance with the following terms and conditions. Subject to these - * conditions, you may download, copy, install, use, modify and distribute - * modified or unmodified copies of this software in source and/or binary - * form. No title or ownership is transferred hereby. - * - * 1) Any source code used, modified or distributed must reproduce and - * retain this copyright notice and list of conditions as they appear in - * the source file. - * - * 2) No right is granted to use any trade name, trademark, or logo of - * Broadcom Corporation. The "Broadcom Corporation" name may not be - * used to endorse or promote products derived from this software - * without the prior written permission of Broadcom Corporation. - * - * 3) THIS SOFTWARE IS PROVIDED "AS-IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF - * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR - * NON-INFRINGEMENT ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM BE LIABLE - * FOR ANY DAMAGES WHATSOEVER, AND IN PARTICULAR, BROADCOM SHALL NOT BE - * LIABLE FOR DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE), EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef LINUX_CFE_API_H_ -#define LINUX_CFE_API_H_ - -#include - - -#define CFE_MI_RESERVED 0 /* memory is reserved, do not use */ -#define CFE_MI_AVAILABLE 1 /* memory is available */ - -#define CFE_FLG_WARMSTART 0x00000001 -#define CFE_FLG_FULL_ARENA 0x00000001 -#define CFE_FLG_ENV_PERMANENT 0x00000001 - -#define CFE_CPU_CMD_START 1 -#define CFE_CPU_CMD_STOP 0 - -#define CFE_STDHANDLE_CONSOLE 0 - -#define CFE_DEV_NETWORK 1 -#define CFE_DEV_DISK 2 -#define CFE_DEV_FLASH 3 -#define CFE_DEV_SERIAL 4 -#define CFE_DEV_CPU 5 -#define CFE_DEV_NVRAM 6 -#define CFE_DEV_CLOCK 7 -#define CFE_DEV_OTHER 8 -#define CFE_DEV_MASK 0x0F - -#define CFE_CACHE_FLUSH_D 1 -#define CFE_CACHE_INVAL_I 2 -#define CFE_CACHE_INVAL_D 4 -#define CFE_CACHE_INVAL_L2 8 - -#define CFE_FWI_64BIT 0x00000001 -#define CFE_FWI_32BIT 0x00000002 -#define CFE_FWI_RELOC 0x00000004 -#define CFE_FWI_UNCACHED 0x00000008 -#define CFE_FWI_MULTICPU 0x00000010 -#define CFE_FWI_FUNCSIM 0x00000020 -#define CFE_FWI_RTLSIM 0x00000040 - -struct cfe_fwinfo { - s64 version; /* major, minor, eco version */ - s64 totalmem; /* total installed mem */ - s64 flags; /* various flags */ - s64 boardid; /* board ID */ - s64 bootarea_va; /* VA of boot area */ - s64 bootarea_pa; /* PA of boot area */ - s64 bootarea_size; /* size of boot area */ -}; - - -/* The public CFE API */ - -int cfe_present(void); /* Check if we booted from CFE. Returns bool */ - -int cfe_getticks(s64 *ticks); -int cfe_close(int handle); -int cfe_cpu_start(int cpu, void (*fn)(void), long sp, long gp, long a1); -int cfe_cpu_stop(int cpu); -int cfe_enumenv(int idx, char *name, int namelen, char *val, int vallen); -int cfe_enumdev(int idx, char *name, int namelen); -int cfe_enummem(int idx, int flags, u64 *start, u64 *length, - u64 *type); -int cfe_exit(int warm, int status); -int cfe_flushcache(int flags); -int cfe_getdevinfo(char *name); -int cfe_getenv(char *name, char *dest, int destlen); -int cfe_getfwinfo(struct cfe_fwinfo *info); -int cfe_getstdhandle(int handletype); -int cfe_inpstat(int handle); -int cfe_ioctl(int handle, unsigned int ioctlnum, unsigned char *buffer, - int length, int *retlen, u64 offset); -int cfe_open(char *name); -int cfe_read(int handle, unsigned char *buffer, int length); -int cfe_readblk(int handle, s64 offset, unsigned char *buffer, int length); -int cfe_setenv(char *name, char *val); -int cfe_write(int handle, unsigned char *buffer, int length); -int cfe_writeblk(int handle, s64 offset, unsigned char *buffer, - int length); - - -/* High level API */ - -/* Print some information to CFE's console (most likely serial line) */ -int cfe_printk(const char *fmt, ...) __attribute__((format(printf, 1, 2))); -int cfe_vprintk(const char *fmt, va_list args); - - - -/* Error codes returned by the low API functions */ - -#define CFE_ISERR(errcode) (errcode < 0) - -#define CFE_OK 0 -#define CFE_ERR -1 /* generic error */ -#define CFE_ERR_INV_COMMAND -2 -#define CFE_ERR_EOF -3 -#define CFE_ERR_IOERR -4 -#define CFE_ERR_NOMEM -5 -#define CFE_ERR_DEVNOTFOUND -6 -#define CFE_ERR_DEVOPEN -7 -#define CFE_ERR_INV_PARAM -8 -#define CFE_ERR_ENVNOTFOUND -9 -#define CFE_ERR_ENVREADONLY -10 - -#define CFE_ERR_NOTELF -11 -#define CFE_ERR_NOT32BIT -12 -#define CFE_ERR_WRONGENDIAN -13 -#define CFE_ERR_BADELFVERS -14 -#define CFE_ERR_NOTMIPS -15 -#define CFE_ERR_BADELFFMT -16 -#define CFE_ERR_BADADDR -17 - -#define CFE_ERR_FILENOTFOUND -18 -#define CFE_ERR_UNSUPPORTED -19 - -#define CFE_ERR_HOSTUNKNOWN -20 - -#define CFE_ERR_TIMEOUT -21 - -#define CFE_ERR_PROTOCOLERR -22 - -#define CFE_ERR_NETDOWN -23 -#define CFE_ERR_NONAMESERVER -24 - -#define CFE_ERR_NOHANDLES -25 -#define CFE_ERR_ALREADYBOUND -26 - -#define CFE_ERR_CANNOTSET -27 -#define CFE_ERR_NOMORE -28 -#define CFE_ERR_BADFILESYS -29 -#define CFE_ERR_FSNOTAVAIL -30 - -#define CFE_ERR_INVBOOTBLOCK -31 -#define CFE_ERR_WRONGDEVTYPE -32 -#define CFE_ERR_BBCHECKSUM -33 -#define CFE_ERR_BOOTPROGCHKSUM -34 - -#define CFE_ERR_LDRNOTAVAIL -35 - -#define CFE_ERR_NOTREADY -36 - -#define CFE_ERR_GETMEM -37 -#define CFE_ERR_SETMEM -38 - -#define CFE_ERR_NOTCONN -39 -#define CFE_ERR_ADDRINUSE -40 - - -#endif /* LINUX_CFE_API_H_ */ diff --git a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/gpio.h b/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/gpio.h deleted file mode 100644 index e7807ce723..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/gpio.h +++ /dev/null @@ -1,67 +0,0 @@ -#ifndef __BCM947XX_GPIO_H -#define __BCM947XX_GPIO_H - -#include - -extern struct ssb_bus ssb; - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline void gpio_free(unsigned gpio) -{ -} - -static inline int gpio_direction_input(unsigned gpio) -{ - ssb_gpio_outen(&ssb, 1 << gpio, 0); - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - ssb_gpio_out(&ssb, 1 << gpio, (value ? 1 << gpio : 0)); - ssb_gpio_outen(&ssb, 1 << gpio, 1 << gpio); - return 0; -} - - -static inline int gpio_to_irq(unsigned gpio) -{ - struct ssb_device *dev; - - dev = ssb.chipco.dev; - if (!dev) - dev = ssb.extif.dev; - if (!dev) - return -EINVAL; - - return ssb_mips_irq(dev) + 2; -} - -static inline int irq_to_gpio(unsigned gpio) -{ - return -EINVAL; -} - - -static inline int gpio_get_value(unsigned gpio) -{ - return !!ssb_gpio_in(&ssb, 1 << gpio); -} - -static inline int gpio_set_value(unsigned gpio, int value) -{ - ssb_gpio_out(&ssb, 1 << gpio, (value ? 1 << gpio : 0)); - return 0; -} - - -/* cansleep wrappers */ -#include - - -#endif /* __BCM947XX_GPIO_H */ - diff --git a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/kernel-entry-init.h b/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/kernel-entry-init.h deleted file mode 100644 index 7df0dc2b5a..0000000000 --- a/target/linux/brcm47xx/files-2.6.23/include/asm-mips/mach-bcm947xx/kernel-entry-init.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2005 Embedded Alley Solutions, Inc - * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) - * Copyright (C) 2006 Michael Buesch - */ -#ifndef __ASM_MACH_GENERIC_KERNEL_ENTRY_H -#define __ASM_MACH_GENERIC_KERNEL_ENTRY_H - -/* Intentionally empty macro, used in head.S. Override in - * arch/mips/mach-xxx/kernel-entry-init.h when necessary. - */ - .macro kernel_entry_setup - .endm - -/* - * Do SMP slave processor setup necessary before we can savely execute C code. - */ - .macro smp_slave_setup - .endm - - -#endif /* __ASM_MACH_GENERIC_KERNEL_ENTRY_H */ diff --git a/target/linux/brcm47xx/patches-2.6.23/001-ssb-fix-gpio-api.patch b/target/linux/brcm47xx/patches-2.6.23/001-ssb-fix-gpio-api.patch deleted file mode 100644 index f2d0c03911..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/001-ssb-fix-gpio-api.patch +++ /dev/null @@ -1,152 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -39,12 +39,14 @@ - ssb_write32(cc->dev, offset, value); - } - --static inline void chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset, -- u32 mask, u32 value) -+static inline u32 chipco_write32_masked(struct ssb_chipcommon *cc, u16 offset, -+ u32 mask, u32 value) - { - value &= mask; - value |= chipco_read32(cc, offset) & ~mask; - chipco_write32(cc, offset, value); -+ -+ return value; - } - - void ssb_chipco_set_clockmode(struct ssb_chipcommon *cc, -@@ -355,16 +357,37 @@ - { - return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask; - } -+EXPORT_SYMBOL(ssb_chipco_gpio_in); -+ -+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) -+{ -+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); -+} -+EXPORT_SYMBOL(ssb_chipco_gpio_out); -+ -+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) -+{ -+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); -+} -+EXPORT_SYMBOL(ssb_chipco_gpio_outen); -+ -+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value) -+{ -+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); -+} -+EXPORT_SYMBOL(ssb_chipco_gpio_control); - --void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) -+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); -+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); - } -+EXPORT_SYMBOL(ssb_chipco_gpio_intmask); - --void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) -+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value) - { -- chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); -+ return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); - } -+EXPORT_SYMBOL(ssb_chipco_gpio_polarity); - - #ifdef CONFIG_SSB_SERIAL - int ssb_chipco_serial_init(struct ssb_chipcommon *cc, ---- a/drivers/ssb/driver_extif.c -+++ b/drivers/ssb/driver_extif.c -@@ -27,12 +27,14 @@ - ssb_write32(extif->dev, offset, value); - } - --static inline void extif_write32_masked(struct ssb_extif *extif, u16 offset, -- u32 mask, u32 value) -+static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset, -+ u32 mask, u32 value) - { - value &= mask; - value |= extif_read32(extif, offset) & ~mask; - extif_write32(extif, offset, value); -+ -+ return value; - } - - #ifdef CONFIG_SSB_SERIAL -@@ -114,16 +116,30 @@ - { - return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask; - } -+EXPORT_SYMBOL(ssb_extif_gpio_in); - --void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) -+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) - { - return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), - mask, value); - } -+EXPORT_SYMBOL(ssb_extif_gpio_out); - --void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) -+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) - { - return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), - mask, value); - } -+EXPORT_SYMBOL(ssb_extif_gpio_outen); -+ -+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value) -+{ -+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); -+} -+EXPORT_SYMBOL(ssb_extif_gpio_polarity); - -+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value) -+{ -+ return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); -+} -+EXPORT_SYMBOL(ssb_extif_gpio_intmask); ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -382,11 +382,13 @@ - extern void ssb_chipco_watchdog_timer_set(struct ssb_chipcommon *cc, - u32 ticks); - -+/* Chipcommon GPIO pin access. */ - u32 ssb_chipco_gpio_in(struct ssb_chipcommon *cc, u32 mask); -- --void ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value); -- --void ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value); -+u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value); - - #ifdef CONFIG_SSB_SERIAL - extern int ssb_chipco_serial_init(struct ssb_chipcommon *cc, ---- a/include/linux/ssb/ssb_driver_extif.h -+++ b/include/linux/ssb/ssb_driver_extif.h -@@ -171,11 +171,12 @@ - extern void ssb_extif_timing_init(struct ssb_extif *extif, - unsigned long ns); - -+/* Extif GPIO pin access */ - u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask); -- --void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value); -- --void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value); -+u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value); -+u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value); -+u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value); -+u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value); - - #ifdef CONFIG_SSB_SERIAL - extern int ssb_extif_serial_init(struct ssb_extif *extif, diff --git a/target/linux/brcm47xx/patches-2.6.23/100-board_support.patch b/target/linux/brcm47xx/patches-2.6.23/100-board_support.patch deleted file mode 100644 index 4ca5697487..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/100-board_support.patch +++ /dev/null @@ -1,193 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -4,6 +4,10 @@ - # Horrible source of confusion. Die, die, die ... - select EMBEDDED - -+config CFE -+ bool -+ # Common Firmware Environment -+ - mainmenu "Linux/MIPS Kernel Configuration" - - menu "Machine selection" -@@ -44,6 +48,23 @@ - note that a kernel built with this option selected will not be - able to run on normal units. - -+config BCM947XX -+ bool "Support for BCM947xx based boards" -+ select DMA_NONCOHERENT -+ select HW_HAS_PCI -+ select IRQ_CPU -+ select SYS_HAS_CPU_MIPS32_R1 -+ select SYS_SUPPORTS_32BIT_KERNEL -+ select SYS_SUPPORTS_LITTLE_ENDIAN -+ select SSB -+ select SSB_SERIAL -+ select SSB_DRIVER_PCICORE -+ select SSB_PCICORE_HOSTMODE -+ select CFE -+ select GENERIC_GPIO -+ help -+ Support for BCM947xx based boards -+ - config MIPS_COBALT - bool "Cobalt Server" - select DMA_NONCOHERENT ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -793,6 +793,28 @@ - } - - -+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c) -+{ -+ decode_config1(c); -+ switch (c->processor_id & 0xff00) { -+ case PRID_IMP_BCM3302: -+ c->cputype = CPU_BCM3302; -+ c->isa_level = MIPS_CPU_ISA_M32R1; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; -+ break; -+ case PRID_IMP_BCM4710: -+ c->cputype = CPU_BCM4710; -+ c->isa_level = MIPS_CPU_ISA_M32R1; -+ c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX | -+ MIPS_CPU_4K_CACHE | MIPS_CPU_COUNTER; -+ break; -+ default: -+ c->cputype = CPU_UNKNOWN; -+ break; -+ } -+} -+ - __init void cpu_probe(void) - { - struct cpuinfo_mips *c = ¤t_cpu_data; -@@ -815,6 +837,9 @@ - case PRID_COMP_SIBYTE: - cpu_probe_sibyte(c); - break; -+ case PRID_COMP_BROADCOM: -+ cpu_probe_broadcom(c); -+ break; - case PRID_COMP_SANDCRAFT: - cpu_probe_sandcraft(c); - break; ---- a/arch/mips/kernel/proc.c -+++ b/arch/mips/kernel/proc.c -@@ -82,6 +82,8 @@ - [CPU_VR4181] = "NEC VR4181", - [CPU_VR4181A] = "NEC VR4181A", - [CPU_SR71000] = "Sandcraft SR71000", -+ [CPU_BCM3302] = "Broadcom BCM3302", -+ [CPU_BCM4710] = "Broadcom BCM4710", - [CPU_PR4450] = "Philips PR4450", - [CPU_LOONGSON2] = "ICT Loongson-2", - }; ---- a/arch/mips/Makefile -+++ b/arch/mips/Makefile -@@ -533,6 +533,18 @@ - load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 - - # -+# Broadcom BCM47XX boards -+# -+core-$(CONFIG_BCM947XX) += arch/mips/bcm947xx/ -+cflags-$(CONFIG_BCM947XX) += -Iarch/mips/bcm947xx/include -Iinclude/asm-mips/mach-bcm947xx -+load-$(CONFIG_BCM947XX) := 0xffffffff80001000 -+ -+# -+# Common Firmware Environment -+# -+core-$(CONFIG_CFE) += arch/mips/cfe/ -+ -+# - # SNI RM - # - core-$(CONFIG_SNI_RM) += arch/mips/sni/ ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -895,6 +895,8 @@ - case CPU_AU1550: - case CPU_AU1200: - case CPU_PR4450: -+ case CPU_BCM3302: -+ case CPU_BCM4710: - i_nop(p); - tlbw(p); - break; ---- a/drivers/Kconfig -+++ b/drivers/Kconfig -@@ -60,6 +60,8 @@ - - source "drivers/hwmon/Kconfig" - -+source "drivers/ssb/Kconfig" -+ - source "drivers/mfd/Kconfig" - - source "drivers/media/Kconfig" ---- a/include/asm-mips/bootinfo.h -+++ b/include/asm-mips/bootinfo.h -@@ -208,6 +208,12 @@ - #define MACH_GROUP_WINDRIVER 28 /* Windriver boards */ - #define MACH_WRPPMC 1 - -+/* -+ * Valid machtype for group Broadcom -+ */ -+#define MACH_GROUP_BRCM 23 /* Broadcom */ -+#define MACH_BCM47XX 1 /* Broadcom BCM47xx */ -+ - #define CL_SIZE COMMAND_LINE_SIZE - - const char *get_system_type(void); ---- a/include/asm-mips/cpu.h -+++ b/include/asm-mips/cpu.h -@@ -106,6 +106,13 @@ - #define PRID_IMP_SR71000 0x0400 - - /* -+ * These are the PRID's for when 23:16 == PRID_COMP_BROADCOM -+ */ -+ -+#define PRID_IMP_BCM4710 0x4000 -+#define PRID_IMP_BCM3302 0x9000 -+ -+/* - * Definitions for 7:0 on legacy processors - */ - -@@ -217,8 +224,10 @@ - #define CPU_R14000 64 - #define CPU_LOONGSON1 65 - #define CPU_LOONGSON2 66 -+#define CPU_BCM3302 67 -+#define CPU_BCM4710 68 - --#define CPU_LAST 66 -+#define CPU_LAST 68 - - /* - * ISA Level encodings ---- a/drivers/Makefile -+++ b/drivers/Makefile -@@ -89,3 +89,5 @@ - obj-$(CONFIG_HID) += hid/ - obj-$(CONFIG_PPC_PS3) += ps3/ - obj-$(CONFIG_OF) += of/ -+obj-$(CONFIG_SSB) += ssb/ -+ ---- a/include/linux/pci_ids.h -+++ b/include/linux/pci_ids.h -@@ -1980,6 +1980,7 @@ - #define PCI_DEVICE_ID_TIGON3_5906M 0x1713 - #define PCI_DEVICE_ID_BCM4401 0x4401 - #define PCI_DEVICE_ID_BCM4401B0 0x4402 -+#define PCI_DEVICE_ID_BCM4713 0x4713 - - #define PCI_VENDOR_ID_TOPIC 0x151f - #define PCI_DEVICE_ID_TOPIC_TP560 0x0000 diff --git a/target/linux/brcm47xx/patches-2.6.23/110-flash_map.patch b/target/linux/brcm47xx/patches-2.6.23/110-flash_map.patch deleted file mode 100644 index 3410d61f76..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/110-flash_map.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/mtd/maps/Kconfig -+++ b/drivers/mtd/maps/Kconfig -@@ -352,6 +352,12 @@ - Mapping for the Flaga digital module. If you don't have one, ignore - this setting. - -+config MTD_BCM47XX -+ tristate "BCM47xx flash device" -+ depends on MIPS && MTD_CFI && BCM947XX -+ help -+ Support for the flash chips on the BCM947xx board. -+ - config MTD_WALNUT - tristate "Flash device mapped on IBM 405GP Walnut" - depends on MTD_JEDECPROBE && WALNUT ---- a/drivers/mtd/maps/Makefile -+++ b/drivers/mtd/maps/Makefile -@@ -33,6 +33,7 @@ - obj-$(CONFIG_MTD_PCMCIA) += pcmciamtd.o - obj-$(CONFIG_MTD_RPXLITE) += rpxlite.o - obj-$(CONFIG_MTD_TQM8XXL) += tqm8xxl.o -+obj-$(CONFIG_MTD_BCM47XX) += bcm47xx-flash.o - obj-$(CONFIG_MTD_SA1100) += sa1100-flash.o - obj-$(CONFIG_MTD_IPAQ) += ipaq-flash.o - obj-$(CONFIG_MTD_SBC_GXX) += sbc_gxx.o diff --git a/target/linux/brcm47xx/patches-2.6.23/120-b44_ssb_support.patch b/target/linux/brcm47xx/patches-2.6.23/120-b44_ssb_support.patch deleted file mode 100644 index 4f33615a51..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/120-b44_ssb_support.patch +++ /dev/null @@ -1,1538 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -1,7 +1,9 @@ --/* b44.c: Broadcom 4400 device driver. -+/* b44.c: Broadcom 4400/47xx device driver. - * - * Copyright (C) 2002 David S. Miller (davem@redhat.com) -- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi) -+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org) -+ * Copyright (C) 2006 Felix Fietkau (nbd@openwrt.org) - * Copyright (C) 2006 Broadcom Corporation. - * - * Distribute under GPL. -@@ -21,11 +23,13 @@ - #include - #include - #include -+#include - - #include - #include - #include - -+ - #include "b44.h" - - #define DRV_MODULE_NAME "b44" -@@ -87,8 +91,8 @@ - static char version[] __devinitdata = - DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; - --MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller"); --MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver"); -+MODULE_AUTHOR("Felix Fietkau, Florian Schirmer, Pekka Pietikainen, David S. Miller"); -+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver"); - MODULE_LICENSE("GPL"); - MODULE_VERSION(DRV_MODULE_VERSION); - -@@ -96,18 +100,11 @@ - module_param(b44_debug, int, 0); - MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value"); - --static struct pci_device_id b44_pci_tbl[] = { -- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401, -- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0, -- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -- { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1, -- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, -- { } /* terminate list with empty entry */ -+static struct ssb_device_id b44_ssb_tbl[] = { -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET, SSB_ANY_REV), -+ SSB_DEVTABLE_END - }; - --MODULE_DEVICE_TABLE(pci, b44_pci_tbl); -- - static void b44_halt(struct b44 *); - static void b44_init_rings(struct b44 *); - -@@ -119,6 +116,7 @@ - - static int dma_desc_align_mask; - static int dma_desc_sync_size; -+static int instance; - - static const char b44_gstrings[][ETH_GSTRING_LEN] = { - #define _B44(x...) # x, -@@ -126,35 +124,24 @@ - #undef _B44 - }; - --static inline void b44_sync_dma_desc_for_device(struct pci_dev *pdev, -- dma_addr_t dma_base, -- unsigned long offset, -- enum dma_data_direction dir) --{ -- dma_sync_single_range_for_device(&pdev->dev, dma_base, -- offset & dma_desc_align_mask, -- dma_desc_sync_size, dir); --} -- --static inline void b44_sync_dma_desc_for_cpu(struct pci_dev *pdev, -- dma_addr_t dma_base, -- unsigned long offset, -- enum dma_data_direction dir) --{ -- dma_sync_single_range_for_cpu(&pdev->dev, dma_base, -- offset & dma_desc_align_mask, -- dma_desc_sync_size, dir); --} -- --static inline unsigned long br32(const struct b44 *bp, unsigned long reg) --{ -- return readl(bp->regs + reg); --} -- --static inline void bw32(const struct b44 *bp, -- unsigned long reg, unsigned long val) --{ -- writel(val, bp->regs + reg); -+static inline void b44_sync_dma_desc_for_device(struct ssb_device *sdev, -+ dma_addr_t dma_base, -+ unsigned long offset, -+ enum dma_data_direction dir) -+{ -+ dma_sync_single_range_for_device(sdev->dev, dma_base, -+ offset & dma_desc_align_mask, -+ dma_desc_sync_size, dir); -+} -+ -+static inline void b44_sync_dma_desc_for_cpu(struct ssb_device *sdev, -+ dma_addr_t dma_base, -+ unsigned long offset, -+ enum dma_data_direction dir) -+{ -+ dma_sync_single_range_for_cpu(sdev->dev, dma_base, -+ offset & dma_desc_align_mask, -+ dma_desc_sync_size, dir); - } - - static int b44_wait_bit(struct b44 *bp, unsigned long reg, -@@ -182,117 +169,29 @@ - return 0; - } - --/* Sonics SiliconBackplane support routines. ROFL, you should see all the -- * buzz words used on this company's website :-) -- * -- * All of these routines must be invoked with bp->lock held and -- * interrupts disabled. -- */ -- --#define SB_PCI_DMA 0x40000000 /* Client Mode PCI memory access space (1 GB) */ --#define BCM4400_PCI_CORE_ADDR 0x18002000 /* Address of PCI core on BCM4400 cards */ -- --static u32 ssb_get_core_rev(struct b44 *bp) --{ -- return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK); --} -- --static u32 ssb_pci_setup(struct b44 *bp, u32 cores) --{ -- u32 bar_orig, pci_rev, val; -- -- pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig); -- pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR); -- pci_rev = ssb_get_core_rev(bp); -- -- val = br32(bp, B44_SBINTVEC); -- val |= cores; -- bw32(bp, B44_SBINTVEC, val); -- -- val = br32(bp, SSB_PCI_TRANS_2); -- val |= SSB_PCI_PREF | SSB_PCI_BURST; -- bw32(bp, SSB_PCI_TRANS_2, val); -- -- pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig); -- -- return pci_rev; --} -- --static void ssb_core_disable(struct b44 *bp) --{ -- if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET) -- return; -- -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK)); -- b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0); -- b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK | -- SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); --} -- --static void ssb_core_reset(struct b44 *bp) -+static inline void __b44_cam_read(struct b44 *bp, unsigned char *data, int index) - { - u32 val; - -- ssb_core_disable(bp); -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); -- -- /* Clear SERR if set, this is a hw bug workaround. */ -- if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR) -- bw32(bp, B44_SBTMSHIGH, 0); -- -- val = br32(bp, B44_SBIMSTATE); -- if (val & (SBIMSTATE_IBE | SBIMSTATE_TO)) -- bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO)); -- -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); -+ bw32(bp, B44_CAM_CTRL, (CAM_CTRL_READ | -+ (index << CAM_CTRL_INDEX_SHIFT))); - -- bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK)); -- br32(bp, B44_SBTMSLOW); -- udelay(1); --} -+ b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1); - --static int ssb_core_unit(struct b44 *bp) --{ --#if 0 -- u32 val = br32(bp, B44_SBADMATCH0); -- u32 base; -+ val = br32(bp, B44_CAM_DATA_LO); - -- type = val & SBADMATCH0_TYPE_MASK; -- switch (type) { -- case 0: -- base = val & SBADMATCH0_BS0_MASK; -- break; -+ data[2] = (val >> 24) & 0xFF; -+ data[3] = (val >> 16) & 0xFF; -+ data[4] = (val >> 8) & 0xFF; -+ data[5] = (val >> 0) & 0xFF; - -- case 1: -- base = val & SBADMATCH0_BS1_MASK; -- break; -+ val = br32(bp, B44_CAM_DATA_HI); - -- case 2: -- default: -- base = val & SBADMATCH0_BS2_MASK; -- break; -- }; --#endif -- return 0; -+ data[0] = (val >> 8) & 0xFF; -+ data[1] = (val >> 0) & 0xFF; - } - --static int ssb_is_core_up(struct b44 *bp) --{ -- return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK)) -- == SBTMSLOW_CLOCK); --} -- --static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) -+static inline void __b44_cam_write(struct b44 *bp, unsigned char *data, int index) - { - u32 val; - -@@ -328,14 +227,14 @@ - bw32(bp, B44_IMASK, bp->imask); - } - --static int b44_readphy(struct b44 *bp, int reg, u32 *val) -+static int __b44_readphy(struct b44 *bp, int phy_addr, int reg, u32 *val) - { - int err; - - bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); - bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) | -- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT))); - err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); -@@ -344,18 +243,34 @@ - return err; - } - --static int b44_writephy(struct b44 *bp, int reg, u32 val) -+static int __b44_writephy(struct b44 *bp, int phy_addr, int reg, u32 val) - { - bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII); - bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START | - (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) | -- (bp->phy_addr << MDIO_DATA_PMD_SHIFT) | -+ (phy_addr << MDIO_DATA_PMD_SHIFT) | - (reg << MDIO_DATA_RA_SHIFT) | - (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) | - (val & MDIO_DATA_DATA))); - return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0); - } - -+static inline int b44_readphy(struct b44 *bp, int reg, u32 *val) -+{ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ return __b44_readphy(bp, bp->phy_addr, reg, val); -+} -+ -+static inline int b44_writephy(struct b44 *bp, int reg, u32 val) -+{ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; -+ -+ return __b44_writephy(bp, bp->phy_addr, reg, val); -+} -+ - /* miilib interface */ - /* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional - * due to code existing before miilib use was added to this driver. -@@ -384,6 +299,8 @@ - u32 val; - int err; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; - err = b44_writephy(bp, MII_BMCR, BMCR_RESET); - if (err) - return err; -@@ -442,11 +359,27 @@ - __b44_set_flow_ctrl(bp, pause_enab); - } - -+ -+extern char *nvram_get(char *name); //FIXME: move elsewhere - static int b44_setup_phy(struct b44 *bp) - { - u32 val; - int err; - -+ /* -+ * workaround for bad hardware design in Linksys WAP54G v1.0 -+ * see https://dev.openwrt.org/ticket/146 -+ * check and reset bit "isolate" -+ */ -+ if ((atoi(nvram_get("boardnum")) == 2) && -+ (__b44_readphy(bp, 0, MII_BMCR, &val) == 0) && -+ (val & BMCR_ISOLATE) && -+ (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)) { -+ printk(KERN_WARNING PFX "PHY: cannot reset MII transceiver isolate bit.\n"); -+ } -+ -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) -+ return 0; - if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0) - goto out; - if ((err = b44_writephy(bp, B44_MII_ALEDCTRL, -@@ -542,6 +475,19 @@ - { - u32 bmsr, aux; - -+ if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) { -+ bp->flags |= B44_FLAG_100_BASE_T; -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ if (!netif_carrier_ok(bp->dev)) { -+ u32 val = br32(bp, B44_TX_CTRL); -+ val |= TX_CTRL_DUPLEX; -+ bw32(bp, B44_TX_CTRL, val); -+ netif_carrier_on(bp->dev); -+ b44_link_report(bp); -+ } -+ return; -+ } -+ - if (!b44_readphy(bp, MII_BMSR, &bmsr) && - !b44_readphy(bp, B44_MII_AUXCTRL, &aux) && - (bmsr != 0xffff)) { -@@ -617,10 +563,10 @@ - - BUG_ON(skb == NULL); - -- pci_unmap_single(bp->pdev, -+ dma_unmap_single(bp->sdev->dev, - pci_unmap_addr(rp, mapping), - skb->len, -- PCI_DMA_TODEVICE); -+ DMA_TO_DEVICE); - rp->skb = NULL; - dev_kfree_skb_irq(skb); - } -@@ -657,9 +603,9 @@ - if (skb == NULL) - return -ENOMEM; - -- mapping = pci_map_single(bp->pdev, skb->data, -+ mapping = dma_map_single(bp->sdev->dev, skb->data, - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - - /* Hardware bug work-around, the chip is unable to do PCI DMA - to/from anything above 1GB :-( */ -@@ -667,18 +613,18 @@ - mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - /* Sigh... */ - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); - dev_kfree_skb_any(skb); - skb = __netdev_alloc_skb(bp->dev, RX_PKT_BUF_SZ, GFP_ATOMIC|GFP_DMA); - if (skb == NULL) - return -ENOMEM; -- mapping = pci_map_single(bp->pdev, skb->data, -+ mapping = dma_map_single(bp->sdev->dev, skb->data, - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - if (dma_mapping_error(mapping) || - mapping + RX_PKT_BUF_SZ > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, RX_PKT_BUF_SZ,DMA_FROM_DEVICE); - dev_kfree_skb_any(skb); - return -ENOMEM; - } -@@ -705,9 +651,9 @@ - dp->addr = cpu_to_le32((u32) mapping + RX_PKT_OFFSET + bp->dma_offset); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, -- dest_idx * sizeof(dp), -- DMA_BIDIRECTIONAL); -+ b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma, -+ dest_idx * sizeof(dp), -+ DMA_BIDIRECTIONAL); - - return RX_PKT_BUF_SZ; - } -@@ -734,9 +680,9 @@ - pci_unmap_addr(src_map, mapping)); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- b44_sync_dma_desc_for_cpu(bp->pdev, bp->rx_ring_dma, -- src_idx * sizeof(src_desc), -- DMA_BIDIRECTIONAL); -+ b44_sync_dma_desc_for_cpu(bp->sdev, bp->rx_ring_dma, -+ src_idx * sizeof(src_desc), -+ DMA_BIDIRECTIONAL); - - ctrl = src_desc->ctrl; - if (dest_idx == (B44_RX_RING_SIZE - 1)) -@@ -750,13 +696,13 @@ - src_map->skb = NULL; - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- b44_sync_dma_desc_for_device(bp->pdev, bp->rx_ring_dma, -- dest_idx * sizeof(dest_desc), -- DMA_BIDIRECTIONAL); -+ b44_sync_dma_desc_for_device(bp->sdev, bp->rx_ring_dma, -+ dest_idx * sizeof(dest_desc), -+ DMA_BIDIRECTIONAL); - -- pci_dma_sync_single_for_device(bp->pdev, le32_to_cpu(src_desc->addr), -+ dma_sync_single_for_device(bp->sdev->dev, le32_to_cpu(src_desc->addr), - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - } - - static int b44_rx(struct b44 *bp, int budget) -@@ -776,9 +722,9 @@ - struct rx_header *rh; - u16 len; - -- pci_dma_sync_single_for_cpu(bp->pdev, map, -+ dma_sync_single_for_cpu(bp->sdev->dev, map, - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - rh = (struct rx_header *) skb->data; - len = le16_to_cpu(rh->len); - if ((len > (RX_PKT_BUF_SZ - RX_PKT_OFFSET)) || -@@ -810,8 +756,8 @@ - skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod); - if (skb_size < 0) - goto drop_it; -- pci_unmap_single(bp->pdev, map, -- skb_size, PCI_DMA_FROMDEVICE); -+ dma_unmap_single(bp->sdev->dev, map, -+ skb_size, DMA_FROM_DEVICE); - /* Leave out rx_header */ - skb_put(skb, len + RX_PKT_OFFSET); - skb_pull(skb, RX_PKT_OFFSET); -@@ -982,24 +928,24 @@ - goto err_out; - } - -- mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); -+ mapping = dma_map_single(bp->sdev->dev, skb->data, len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - struct sk_buff *bounce_skb; - - /* Chip can't handle DMA to/from >1GB, use bounce buffer */ - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, len, DMA_TO_DEVICE); - - bounce_skb = __dev_alloc_skb(len, GFP_ATOMIC | GFP_DMA); - if (!bounce_skb) - goto err_out; - -- mapping = pci_map_single(bp->pdev, bounce_skb->data, -- len, PCI_DMA_TODEVICE); -+ mapping = dma_map_single(bp->sdev->dev, bounce_skb->data, -+ len, DMA_TO_DEVICE); - if (dma_mapping_error(mapping) || mapping + len > DMA_30BIT_MASK) { - if (!dma_mapping_error(mapping)) -- pci_unmap_single(bp->pdev, mapping, -- len, PCI_DMA_TODEVICE); -+ dma_unmap_single(bp->sdev->dev, mapping, -+ len, DMA_TO_DEVICE); - dev_kfree_skb_any(bounce_skb); - goto err_out; - } -@@ -1022,9 +968,9 @@ - bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset); - - if (bp->flags & B44_FLAG_TX_RING_HACK) -- b44_sync_dma_desc_for_device(bp->pdev, bp->tx_ring_dma, -- entry * sizeof(bp->tx_ring[0]), -- DMA_TO_DEVICE); -+ b44_sync_dma_desc_for_device(bp->sdev, bp->tx_ring_dma, -+ entry * sizeof(bp->tx_ring[0]), -+ DMA_TO_DEVICE); - - entry = NEXT_TX(entry); - -@@ -1097,10 +1043,10 @@ - - if (rp->skb == NULL) - continue; -- pci_unmap_single(bp->pdev, -+ dma_unmap_single(bp->sdev->dev, - pci_unmap_addr(rp, mapping), - RX_PKT_BUF_SZ, -- PCI_DMA_FROMDEVICE); -+ DMA_FROM_DEVICE); - dev_kfree_skb_any(rp->skb); - rp->skb = NULL; - } -@@ -1111,10 +1057,10 @@ - - if (rp->skb == NULL) - continue; -- pci_unmap_single(bp->pdev, -+ dma_unmap_single(bp->sdev->dev, - pci_unmap_addr(rp, mapping), - rp->skb->len, -- PCI_DMA_TODEVICE); -+ DMA_TO_DEVICE); - dev_kfree_skb_any(rp->skb); - rp->skb = NULL; - } -@@ -1136,14 +1082,14 @@ - memset(bp->tx_ring, 0, B44_TX_RING_BYTES); - - if (bp->flags & B44_FLAG_RX_RING_HACK) -- dma_sync_single_for_device(&bp->pdev->dev, bp->rx_ring_dma, -- DMA_TABLE_BYTES, -- PCI_DMA_BIDIRECTIONAL); -+ dma_sync_single_for_device(bp->sdev->dev, bp->rx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_BIDIRECTIONAL); - - if (bp->flags & B44_FLAG_TX_RING_HACK) -- dma_sync_single_for_device(&bp->pdev->dev, bp->tx_ring_dma, -- DMA_TABLE_BYTES, -- PCI_DMA_TODEVICE); -+ dma_sync_single_for_device(bp->sdev->dev, bp->tx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_TO_DEVICE); - - for (i = 0; i < bp->rx_pending; i++) { - if (b44_alloc_rx_skb(bp, -1, i) < 0) -@@ -1163,24 +1109,24 @@ - bp->tx_buffers = NULL; - if (bp->rx_ring) { - if (bp->flags & B44_FLAG_RX_RING_HACK) { -- dma_unmap_single(&bp->pdev->dev, bp->rx_ring_dma, -- DMA_TABLE_BYTES, -- DMA_BIDIRECTIONAL); -+ dma_unmap_single(bp->sdev->dev, bp->rx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_BIDIRECTIONAL); - kfree(bp->rx_ring); - } else -- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, -+ dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES, - bp->rx_ring, bp->rx_ring_dma); - bp->rx_ring = NULL; - bp->flags &= ~B44_FLAG_RX_RING_HACK; - } - if (bp->tx_ring) { - if (bp->flags & B44_FLAG_TX_RING_HACK) { -- dma_unmap_single(&bp->pdev->dev, bp->tx_ring_dma, -- DMA_TABLE_BYTES, -- DMA_TO_DEVICE); -+ dma_unmap_single(bp->sdev->dev, bp->tx_ring_dma, -+ DMA_TABLE_BYTES, -+ DMA_TO_DEVICE); - kfree(bp->tx_ring); - } else -- pci_free_consistent(bp->pdev, DMA_TABLE_BYTES, -+ dma_free_coherent(bp->sdev->dev, DMA_TABLE_BYTES, - bp->tx_ring, bp->tx_ring_dma); - bp->tx_ring = NULL; - bp->flags &= ~B44_FLAG_TX_RING_HACK; -@@ -1206,7 +1152,7 @@ - goto out_err; - - size = DMA_TABLE_BYTES; -- bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma); -+ bp->rx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->rx_ring_dma, GFP_ATOMIC); - if (!bp->rx_ring) { - /* Allocation may have failed due to pci_alloc_consistent - insisting on use of GFP_DMA, which is more restrictive -@@ -1218,9 +1164,9 @@ - if (!rx_ring) - goto out_err; - -- rx_ring_dma = dma_map_single(&bp->pdev->dev, rx_ring, -- DMA_TABLE_BYTES, -- DMA_BIDIRECTIONAL); -+ rx_ring_dma = dma_map_single(bp->sdev->dev, rx_ring, -+ DMA_TABLE_BYTES, -+ DMA_BIDIRECTIONAL); - - if (dma_mapping_error(rx_ring_dma) || - rx_ring_dma + size > DMA_30BIT_MASK) { -@@ -1233,9 +1179,9 @@ - bp->flags |= B44_FLAG_RX_RING_HACK; - } - -- bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma); -+ bp->tx_ring = dma_alloc_coherent(bp->sdev->dev, size, &bp->tx_ring_dma, GFP_ATOMIC); - if (!bp->tx_ring) { -- /* Allocation may have failed due to pci_alloc_consistent -+ /* Allocation may have failed due to dma_alloc_coherent - insisting on use of GFP_DMA, which is more restrictive - than necessary... */ - struct dma_desc *tx_ring; -@@ -1245,9 +1191,9 @@ - if (!tx_ring) - goto out_err; - -- tx_ring_dma = dma_map_single(&bp->pdev->dev, tx_ring, -- DMA_TABLE_BYTES, -- DMA_TO_DEVICE); -+ tx_ring_dma = dma_map_single(bp->sdev->dev, tx_ring, -+ DMA_TABLE_BYTES, -+ DMA_TO_DEVICE); - - if (dma_mapping_error(tx_ring_dma) || - tx_ring_dma + size > DMA_30BIT_MASK) { -@@ -1282,7 +1228,9 @@ - /* bp->lock is held. */ - static void b44_chip_reset(struct b44 *bp) - { -- if (ssb_is_core_up(bp)) { -+ struct ssb_device *sdev = bp->sdev; -+ -+ if (ssb_device_is_enabled(bp->sdev)) { - bw32(bp, B44_RCV_LAZY, 0); - bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE); - b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 200, 1); -@@ -1294,19 +1242,24 @@ - } - bw32(bp, B44_DMARX_CTRL, 0); - bp->rx_prod = bp->rx_cons = 0; -- } else { -- ssb_pci_setup(bp, (bp->core_unit == 0 ? -- SBINTVEC_ENET0 : -- SBINTVEC_ENET1)); - } - -- ssb_core_reset(bp); -- -+ ssb_device_enable(bp->sdev, 0); - b44_clear_stats(bp); - -- /* Make PHY accessible. */ -- bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ switch (sdev->bus->bustype) { -+ case SSB_BUSTYPE_SSB: -+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | -+ (((ssb_clockspeed(sdev->bus) + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO) -+ & MDIO_CTRL_MAXF_MASK))); -+ break; -+ case SSB_BUSTYPE_PCI: -+ case SSB_BUSTYPE_PCMCIA: -+ bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE | - (0x0d & MDIO_CTRL_MAXF_MASK))); -+ break; -+ } -+ - br32(bp, B44_MDIO_CTRL); - - if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) { -@@ -1349,6 +1302,7 @@ - { - struct b44 *bp = netdev_priv(dev); - struct sockaddr *addr = p; -+ u32 val; - - if (netif_running(dev)) - return -EBUSY; -@@ -1359,7 +1313,11 @@ - memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - - spin_lock_irq(&bp->lock); -- __b44_set_mac_addr(bp); -+ -+ val = br32(bp, B44_RXCONFIG); -+ if (!(val & RXCONFIG_CAM_ABSENT)) -+ __b44_set_mac_addr(bp); -+ - spin_unlock_irq(&bp->lock); - - return 0; -@@ -1445,18 +1403,6 @@ - return err; - } - --#if 0 --/*static*/ void b44_dump_state(struct b44 *bp) --{ -- u32 val32, val32_2, val32_3, val32_4, val32_5; -- u16 val16; -- -- pci_read_config_word(bp->pdev, PCI_STATUS, &val16); -- printk("DEBUG: PCI status [%04x] \n", val16); -- --} --#endif -- - #ifdef CONFIG_NET_POLL_CONTROLLER - /* - * Polling receive - used by netconsole and other diagnostic tools -@@ -1570,7 +1516,6 @@ - static void b44_setup_wol(struct b44 *bp) - { - u32 val; -- u16 pmval; - - bw32(bp, B44_RXCONFIG, RXCONFIG_ALLMULTI); - -@@ -1594,13 +1539,6 @@ - } else { - b44_setup_pseudo_magicp(bp); - } -- -- val = br32(bp, B44_SBTMSLOW); -- bw32(bp, B44_SBTMSLOW, val | SBTMSLOW_PE); -- -- pci_read_config_word(bp->pdev, SSB_PMCSR, &pmval); -- pci_write_config_word(bp->pdev, SSB_PMCSR, pmval | SSB_PE); -- - } - - static int b44_close(struct net_device *dev) -@@ -1700,7 +1638,7 @@ - - val = br32(bp, B44_RXCONFIG); - val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI); -- if (dev->flags & IFF_PROMISC) { -+ if ((dev->flags & IFF_PROMISC) || (val & RXCONFIG_CAM_ABSENT)) { - val |= RXCONFIG_PROMISC; - bw32(bp, B44_RXCONFIG, val); - } else { -@@ -1747,12 +1685,8 @@ - - static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info) - { -- struct b44 *bp = netdev_priv(dev); -- struct pci_dev *pci_dev = bp->pdev; -- - strcpy (info->driver, DRV_MODULE_NAME); - strcpy (info->version, DRV_MODULE_VERSION); -- strcpy (info->bus_info, pci_name(pci_dev)); - } - - static int b44_nway_reset(struct net_device *dev) -@@ -2035,6 +1969,245 @@ - .get_ethtool_stats = b44_get_ethtool_stats, - }; - -+static int b44_ethtool_ioctl (struct net_device *dev, void __user *useraddr) -+{ -+ struct b44 *bp = dev->priv; -+ u32 ethcmd; -+ -+ if (copy_from_user (ðcmd, useraddr, sizeof (ethcmd))) -+ return -EFAULT; -+ -+ switch (ethcmd) { -+ case ETHTOOL_GDRVINFO: { -+ struct ethtool_drvinfo info = { ETHTOOL_GDRVINFO }; -+ strcpy (info.driver, DRV_MODULE_NAME); -+ strcpy (info.version, DRV_MODULE_VERSION); -+ memset(&info.fw_version, 0, sizeof(info.fw_version)); -+ info.eedump_len = 0; -+ info.regdump_len = 0; -+ if (copy_to_user (useraddr, &info, sizeof (info))) -+ return -EFAULT; -+ return 0; -+ } -+ -+ case ETHTOOL_GSET: { -+ struct ethtool_cmd cmd = { ETHTOOL_GSET }; -+ -+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) -+ return -EAGAIN; -+ cmd.supported = (SUPPORTED_Autoneg); -+ cmd.supported |= (SUPPORTED_100baseT_Half | -+ SUPPORTED_100baseT_Full | -+ SUPPORTED_10baseT_Half | -+ SUPPORTED_10baseT_Full | -+ SUPPORTED_MII); -+ -+ cmd.advertising = 0; -+ if (bp->flags & B44_FLAG_ADV_10HALF) -+ cmd.advertising |= ADVERTISE_10HALF; -+ if (bp->flags & B44_FLAG_ADV_10FULL) -+ cmd.advertising |= ADVERTISE_10FULL; -+ if (bp->flags & B44_FLAG_ADV_100HALF) -+ cmd.advertising |= ADVERTISE_100HALF; -+ if (bp->flags & B44_FLAG_ADV_100FULL) -+ cmd.advertising |= ADVERTISE_100FULL; -+ cmd.advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; -+ cmd.speed = (bp->flags & B44_FLAG_100_BASE_T) ? -+ SPEED_100 : SPEED_10; -+ cmd.duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ? -+ DUPLEX_FULL : DUPLEX_HALF; -+ cmd.port = 0; -+ cmd.phy_address = bp->phy_addr; -+ cmd.transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ? -+ XCVR_INTERNAL : XCVR_EXTERNAL; -+ cmd.autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ? -+ AUTONEG_DISABLE : AUTONEG_ENABLE; -+ cmd.maxtxpkt = 0; -+ cmd.maxrxpkt = 0; -+ if (copy_to_user(useraddr, &cmd, sizeof(cmd))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SSET: { -+ struct ethtool_cmd cmd; -+ -+ if (!(bp->flags & B44_FLAG_INIT_COMPLETE)) -+ return -EAGAIN; -+ -+ if (copy_from_user(&cmd, useraddr, sizeof(cmd))) -+ return -EFAULT; -+ -+ /* We do not support gigabit. */ -+ if (cmd.autoneg == AUTONEG_ENABLE) { -+ if (cmd.advertising & -+ (ADVERTISED_1000baseT_Half | -+ ADVERTISED_1000baseT_Full)) -+ return -EINVAL; -+ } else if ((cmd.speed != SPEED_100 && -+ cmd.speed != SPEED_10) || -+ (cmd.duplex != DUPLEX_HALF && -+ cmd.duplex != DUPLEX_FULL)) { -+ return -EINVAL; -+ } -+ -+ spin_lock_irq(&bp->lock); -+ -+ if (cmd.autoneg == AUTONEG_ENABLE) { -+ bp->flags &= ~B44_FLAG_FORCE_LINK; -+ bp->flags &= ~(B44_FLAG_ADV_10HALF | -+ B44_FLAG_ADV_10FULL | -+ B44_FLAG_ADV_100HALF | -+ B44_FLAG_ADV_100FULL); -+ if (cmd.advertising & ADVERTISE_10HALF) -+ bp->flags |= B44_FLAG_ADV_10HALF; -+ if (cmd.advertising & ADVERTISE_10FULL) -+ bp->flags |= B44_FLAG_ADV_10FULL; -+ if (cmd.advertising & ADVERTISE_100HALF) -+ bp->flags |= B44_FLAG_ADV_100HALF; -+ if (cmd.advertising & ADVERTISE_100FULL) -+ bp->flags |= B44_FLAG_ADV_100FULL; -+ } else { -+ bp->flags |= B44_FLAG_FORCE_LINK; -+ if (cmd.speed == SPEED_100) -+ bp->flags |= B44_FLAG_100_BASE_T; -+ if (cmd.duplex == DUPLEX_FULL) -+ bp->flags |= B44_FLAG_FULL_DUPLEX; -+ } -+ -+ b44_setup_phy(bp); -+ -+ spin_unlock_irq(&bp->lock); -+ -+ return 0; -+ } -+ -+ case ETHTOOL_GMSGLVL: { -+ struct ethtool_value edata = { ETHTOOL_GMSGLVL }; -+ edata.data = bp->msg_enable; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SMSGLVL: { -+ struct ethtool_value edata; -+ if (copy_from_user(&edata, useraddr, sizeof(edata))) -+ return -EFAULT; -+ bp->msg_enable = edata.data; -+ return 0; -+ } -+ case ETHTOOL_NWAY_RST: { -+ u32 bmcr; -+ int r; -+ -+ spin_lock_irq(&bp->lock); -+ b44_readphy(bp, MII_BMCR, &bmcr); -+ b44_readphy(bp, MII_BMCR, &bmcr); -+ r = -EINVAL; -+ if (bmcr & BMCR_ANENABLE) { -+ b44_writephy(bp, MII_BMCR, -+ bmcr | BMCR_ANRESTART); -+ r = 0; -+ } -+ spin_unlock_irq(&bp->lock); -+ -+ return r; -+ } -+ case ETHTOOL_GLINK: { -+ struct ethtool_value edata = { ETHTOOL_GLINK }; -+ edata.data = netif_carrier_ok(bp->dev) ? 1 : 0; -+ if (copy_to_user(useraddr, &edata, sizeof(edata))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_GRINGPARAM: { -+ struct ethtool_ringparam ering = { ETHTOOL_GRINGPARAM }; -+ -+ ering.rx_max_pending = B44_RX_RING_SIZE - 1; -+ ering.rx_pending = bp->rx_pending; -+ -+ /* XXX ethtool lacks a tx_max_pending, oops... */ -+ -+ if (copy_to_user(useraddr, &ering, sizeof(ering))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SRINGPARAM: { -+ struct ethtool_ringparam ering; -+ -+ if (copy_from_user(&ering, useraddr, sizeof(ering))) -+ return -EFAULT; -+ -+ if ((ering.rx_pending > B44_RX_RING_SIZE - 1) || -+ (ering.rx_mini_pending != 0) || -+ (ering.rx_jumbo_pending != 0) || -+ (ering.tx_pending > B44_TX_RING_SIZE - 1)) -+ return -EINVAL; -+ -+ spin_lock_irq(&bp->lock); -+ -+ bp->rx_pending = ering.rx_pending; -+ bp->tx_pending = ering.tx_pending; -+ -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp, 1); -+ netif_wake_queue(bp->dev); -+ spin_unlock_irq(&bp->lock); -+ -+ b44_enable_ints(bp); -+ -+ return 0; -+ } -+ case ETHTOOL_GPAUSEPARAM: { -+ struct ethtool_pauseparam epause = { ETHTOOL_GPAUSEPARAM }; -+ -+ epause.autoneg = -+ (bp->flags & B44_FLAG_PAUSE_AUTO) != 0; -+ epause.rx_pause = -+ (bp->flags & B44_FLAG_RX_PAUSE) != 0; -+ epause.tx_pause = -+ (bp->flags & B44_FLAG_TX_PAUSE) != 0; -+ if (copy_to_user(useraddr, &epause, sizeof(epause))) -+ return -EFAULT; -+ return 0; -+ } -+ case ETHTOOL_SPAUSEPARAM: { -+ struct ethtool_pauseparam epause; -+ -+ if (copy_from_user(&epause, useraddr, sizeof(epause))) -+ return -EFAULT; -+ -+ spin_lock_irq(&bp->lock); -+ if (epause.autoneg) -+ bp->flags |= B44_FLAG_PAUSE_AUTO; -+ else -+ bp->flags &= ~B44_FLAG_PAUSE_AUTO; -+ if (epause.rx_pause) -+ bp->flags |= B44_FLAG_RX_PAUSE; -+ else -+ bp->flags &= ~B44_FLAG_RX_PAUSE; -+ if (epause.tx_pause) -+ bp->flags |= B44_FLAG_TX_PAUSE; -+ else -+ bp->flags &= ~B44_FLAG_TX_PAUSE; -+ if (bp->flags & B44_FLAG_PAUSE_AUTO) { -+ b44_halt(bp); -+ b44_init_rings(bp); -+ b44_init_hw(bp, 1); -+ } else { -+ __b44_set_flow_ctrl(bp, bp->flags); -+ } -+ spin_unlock_irq(&bp->lock); -+ -+ b44_enable_ints(bp); -+ -+ return 0; -+ } -+ }; -+ -+ return -EOPNOTSUPP; -+} -+ - static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) - { - struct mii_ioctl_data *data = if_mii(ifr); -@@ -2044,40 +2217,64 @@ - if (!netif_running(dev)) - goto out; - -- spin_lock_irq(&bp->lock); -- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL); -- spin_unlock_irq(&bp->lock); --out: -- return err; --} -+ switch (cmd) { -+ case SIOCETHTOOL: -+ return b44_ethtool_ioctl(dev, (void __user*) ifr->ifr_data); - --/* Read 128-bytes of EEPROM. */ --static int b44_read_eeprom(struct b44 *bp, u8 *data) --{ -- long i; -- __le16 *ptr = (__le16 *) data; -+ case SIOCGMIIPHY: -+ data->phy_id = bp->phy_addr; - -- for (i = 0; i < 128; i += 2) -- ptr[i / 2] = cpu_to_le16(readw(bp->regs + 4096 + i)); -+ /* fallthru */ -+ case SIOCGMIIREG: { -+ u32 mii_regval; -+ spin_lock_irq(&bp->lock); -+ err = __b44_readphy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); -+ spin_unlock_irq(&bp->lock); - -- return 0; -+ data->val_out = mii_regval; -+ -+ return err; -+ } -+ -+ case SIOCSMIIREG: -+ if (!capable(CAP_NET_ADMIN)) -+ return -EPERM; -+ -+ spin_lock_irq(&bp->lock); -+ err = __b44_writephy(bp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); -+ spin_unlock_irq(&bp->lock); -+ -+ return err; -+ -+ default: -+ break; -+ }; -+ return -EOPNOTSUPP; -+ -+out: -+ return err; - } - - static int __devinit b44_get_invariants(struct b44 *bp) - { -- u8 eeprom[128]; -- int err; -+ struct ssb_device *sdev = bp->sdev; -+ int err = 0; -+ u8 *addr; - -- err = b44_read_eeprom(bp, &eeprom[0]); -- if (err) -- goto out; -+ bp->dma_offset = ssb_dma_translation(sdev); - -- bp->dev->dev_addr[0] = eeprom[79]; -- bp->dev->dev_addr[1] = eeprom[78]; -- bp->dev->dev_addr[2] = eeprom[81]; -- bp->dev->dev_addr[3] = eeprom[80]; -- bp->dev->dev_addr[4] = eeprom[83]; -- bp->dev->dev_addr[5] = eeprom[82]; -+ switch (instance) { -+ case 1: -+ addr = sdev->bus->sprom.et0mac; -+ bp->phy_addr = sdev->bus->sprom.et0phyaddr; -+ break; -+ default: -+ addr = sdev->bus->sprom.et1mac; -+ bp->phy_addr = sdev->bus->sprom.et1phyaddr; -+ break; -+ } -+ -+ memcpy(bp->dev->dev_addr, addr, 6); - - if (!is_valid_ether_addr(&bp->dev->dev_addr[0])){ - printk(KERN_ERR PFX "Invalid MAC address found in EEPROM\n"); -@@ -2086,103 +2283,52 @@ - - memcpy(bp->dev->perm_addr, bp->dev->dev_addr, bp->dev->addr_len); - -- bp->phy_addr = eeprom[90] & 0x1f; -- - bp->imask = IMASK_DEF; - -- bp->core_unit = ssb_core_unit(bp); -- bp->dma_offset = SB_PCI_DMA; -- - /* XXX - really required? - bp->flags |= B44_FLAG_BUGGY_TXPTR; - */ - -- if (ssb_get_core_rev(bp) >= 7) -+ if (bp->sdev->id.revision >= 7) - bp->flags |= B44_FLAG_B0_ANDLATER; - --out: - return err; - } - --static int __devinit b44_init_one(struct pci_dev *pdev, -- const struct pci_device_id *ent) -+static int __devinit b44_init_one(struct ssb_device *sdev, -+ const struct ssb_device_id *ent) - { - static int b44_version_printed = 0; -- unsigned long b44reg_base, b44reg_len; - struct net_device *dev; - struct b44 *bp; - int err, i; - -+ instance++; -+ - if (b44_version_printed++ == 0) - printk(KERN_INFO "%s", version); - -- err = pci_enable_device(pdev); -- if (err) { -- dev_err(&pdev->dev, "Cannot enable PCI device, " -- "aborting.\n"); -- return err; -- } -- -- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { -- dev_err(&pdev->dev, -- "Cannot find proper PCI device " -- "base address, aborting.\n"); -- err = -ENODEV; -- goto err_out_disable_pdev; -- } -- -- err = pci_request_regions(pdev, DRV_MODULE_NAME); -- if (err) { -- dev_err(&pdev->dev, -- "Cannot obtain PCI resources, aborting.\n"); -- goto err_out_disable_pdev; -- } -- -- pci_set_master(pdev); -- -- err = pci_set_dma_mask(pdev, (u64) DMA_30BIT_MASK); -- if (err) { -- dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); -- goto err_out_free_res; -- } -- -- err = pci_set_consistent_dma_mask(pdev, (u64) DMA_30BIT_MASK); -- if (err) { -- dev_err(&pdev->dev, "No usable DMA configuration, aborting.\n"); -- goto err_out_free_res; -- } -- -- b44reg_base = pci_resource_start(pdev, 0); -- b44reg_len = pci_resource_len(pdev, 0); -- - dev = alloc_etherdev(sizeof(*bp)); - if (!dev) { -- dev_err(&pdev->dev, "Etherdev alloc failed, aborting.\n"); -+ dev_err(sdev->dev, "Etherdev alloc failed, aborting.\n"); - err = -ENOMEM; -- goto err_out_free_res; -+ goto out; - } - - SET_MODULE_OWNER(dev); -- SET_NETDEV_DEV(dev,&pdev->dev); -+ SET_NETDEV_DEV(dev,sdev->dev); - - /* No interesting netdevice features in this card... */ - dev->features |= 0; - - bp = netdev_priv(dev); -- bp->pdev = pdev; -+ bp->sdev = sdev; - bp->dev = dev; - - bp->msg_enable = netif_msg_init(b44_debug, B44_DEF_MSG_ENABLE); - - spin_lock_init(&bp->lock); - -- bp->regs = ioremap(b44reg_base, b44reg_len); -- if (bp->regs == 0UL) { -- dev_err(&pdev->dev, "Cannot map device registers, aborting.\n"); -- err = -ENOMEM; -- goto err_out_free_dev; -- } -- - bp->rx_pending = B44_DEF_RX_RING_PENDING; - bp->tx_pending = B44_DEF_TX_RING_PENDING; - -@@ -2201,16 +2347,16 @@ - dev->poll_controller = b44_poll_controller; - #endif - dev->change_mtu = b44_change_mtu; -- dev->irq = pdev->irq; -+ dev->irq = sdev->irq; - SET_ETHTOOL_OPS(dev, &b44_ethtool_ops); - - netif_carrier_off(dev); - - err = b44_get_invariants(bp); - if (err) { -- dev_err(&pdev->dev, -+ dev_err(sdev->dev, - "Problem fetching invariants of chip, aborting.\n"); -- goto err_out_iounmap; -+ goto err_out_free_dev; - } - - bp->mii_if.dev = dev; -@@ -2229,61 +2375,52 @@ - - err = register_netdev(dev); - if (err) { -- dev_err(&pdev->dev, "Cannot register net device, aborting.\n"); -- goto err_out_iounmap; -+ dev_err(sdev->dev, "Cannot register net device, aborting.\n"); -+ goto out; - } - -- pci_set_drvdata(pdev, dev); -- -- pci_save_state(bp->pdev); -+ ssb_set_drvdata(sdev, dev); - - /* Chip reset provides power to the b44 MAC & PCI cores, which - * is necessary for MAC register access. - */ - b44_chip_reset(bp); - -- printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name); -+ printk(KERN_INFO "%s: Broadcom 10/100BaseT Ethernet ", dev->name); - for (i = 0; i < 6; i++) - printk("%2.2x%c", dev->dev_addr[i], - i == 5 ? '\n' : ':'); - -- return 0; -+ /* Initialize phy */ -+ spin_lock_irq(&bp->lock); -+ b44_chip_reset(bp); -+ spin_unlock_irq(&bp->lock); - --err_out_iounmap: -- iounmap(bp->regs); -+ return 0; - - err_out_free_dev: - free_netdev(dev); - --err_out_free_res: -- pci_release_regions(pdev); -- --err_out_disable_pdev: -- pci_disable_device(pdev); -- pci_set_drvdata(pdev, NULL); -+out: - return err; - } - --static void __devexit b44_remove_one(struct pci_dev *pdev) -+static void __devexit b44_remove_one(struct ssb_device *pdev) - { -- struct net_device *dev = pci_get_drvdata(pdev); -- struct b44 *bp = netdev_priv(dev); -+ struct net_device *dev = ssb_get_drvdata(pdev); - - unregister_netdev(dev); -- iounmap(bp->regs); - free_netdev(dev); -- pci_release_regions(pdev); -- pci_disable_device(pdev); -- pci_set_drvdata(pdev, NULL); -+ ssb_set_drvdata(pdev, NULL); - } - --static int b44_suspend(struct pci_dev *pdev, pm_message_t state) -+static int b44_suspend(struct ssb_device *pdev, pm_message_t state) - { -- struct net_device *dev = pci_get_drvdata(pdev); -+ struct net_device *dev = ssb_get_drvdata(pdev); - struct b44 *bp = netdev_priv(dev); - - if (!netif_running(dev)) -- return 0; -+ return 0; - - del_timer_sync(&bp->timer); - -@@ -2301,33 +2438,22 @@ - b44_init_hw(bp, B44_PARTIAL_RESET); - b44_setup_wol(bp); - } -- pci_disable_device(pdev); -+ - return 0; - } - --static int b44_resume(struct pci_dev *pdev) -+static int b44_resume(struct ssb_device *pdev) - { -- struct net_device *dev = pci_get_drvdata(pdev); -+ struct net_device *dev = ssb_get_drvdata(pdev); - struct b44 *bp = netdev_priv(dev); - int rc = 0; - -- pci_restore_state(pdev); -- rc = pci_enable_device(pdev); -- if (rc) { -- printk(KERN_ERR PFX "%s: pci_enable_device failed\n", -- dev->name); -- return rc; -- } -- -- pci_set_master(pdev); -- - if (!netif_running(dev)) - return 0; - - rc = request_irq(dev->irq, b44_interrupt, IRQF_SHARED, dev->name, dev); - if (rc) { - printk(KERN_ERR PFX "%s: request_irq failed\n", dev->name); -- pci_disable_device(pdev); - return rc; - } - -@@ -2346,29 +2472,31 @@ - return 0; - } - --static struct pci_driver b44_driver = { -+static struct ssb_driver b44_driver = { - .name = DRV_MODULE_NAME, -- .id_table = b44_pci_tbl, -+ .id_table = b44_ssb_tbl, - .probe = b44_init_one, - .remove = __devexit_p(b44_remove_one), -- .suspend = b44_suspend, -- .resume = b44_resume, -+ .suspend = b44_suspend, -+ .resume = b44_resume, - }; - - static int __init b44_init(void) - { - unsigned int dma_desc_align_size = dma_get_cache_alignment(); - -+ instance = 0; -+ - /* Setup paramaters for syncing RX/TX DMA descriptors */ - dma_desc_align_mask = ~(dma_desc_align_size - 1); - dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); - -- return pci_register_driver(&b44_driver); -+ return ssb_driver_register(&b44_driver); - } - - static void __exit b44_cleanup(void) - { -- pci_unregister_driver(&b44_driver); -+ ssb_driver_unregister(&b44_driver); - } - - module_init(b44_init); ---- a/drivers/net/b44.h -+++ b/drivers/net/b44.h -@@ -129,6 +129,7 @@ - #define RXCONFIG_FLOW 0x00000020 /* Flow Control Enable */ - #define RXCONFIG_FLOW_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */ - #define RXCONFIG_RFILT 0x00000080 /* Reject Filter */ -+#define RXCONFIG_CAM_ABSENT 0x00000100 /* CAM Absent */ - #define B44_RXMAXLEN 0x0404UL /* EMAC RX Max Packet Length */ - #define B44_TXMAXLEN 0x0408UL /* EMAC TX Max Packet Length */ - #define B44_MDIO_CTRL 0x0410UL /* EMAC MDIO Control */ -@@ -227,75 +228,9 @@ - #define B44_RX_PAUSE 0x05D4UL /* MIB RX Pause Packets */ - #define B44_RX_NPAUSE 0x05D8UL /* MIB RX Non-Pause Packets */ - --/* Silicon backplane register definitions */ --#define B44_SBIMSTATE 0x0F90UL /* SB Initiator Agent State */ --#define SBIMSTATE_PC 0x0000000f /* Pipe Count */ --#define SBIMSTATE_AP_MASK 0x00000030 /* Arbitration Priority */ --#define SBIMSTATE_AP_BOTH 0x00000000 /* Use both timeslices and token */ --#define SBIMSTATE_AP_TS 0x00000010 /* Use timeslices only */ --#define SBIMSTATE_AP_TK 0x00000020 /* Use token only */ --#define SBIMSTATE_AP_RSV 0x00000030 /* Reserved */ --#define SBIMSTATE_IBE 0x00020000 /* In Band Error */ --#define SBIMSTATE_TO 0x00040000 /* Timeout */ --#define B44_SBINTVEC 0x0F94UL /* SB Interrupt Mask */ --#define SBINTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ --#define SBINTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ --#define SBINTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */ --#define SBINTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */ --#define SBINTVEC_USB 0x00000010 /* Enable interrupts for usb */ --#define SBINTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */ --#define SBINTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ --#define B44_SBTMSLOW 0x0F98UL /* SB Target State Low */ --#define SBTMSLOW_RESET 0x00000001 /* Reset */ --#define SBTMSLOW_REJECT 0x00000002 /* Reject */ --#define SBTMSLOW_CLOCK 0x00010000 /* Clock Enable */ --#define SBTMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ --#define SBTMSLOW_PE 0x40000000 /* Power Management Enable */ --#define SBTMSLOW_BE 0x80000000 /* BIST Enable */ --#define B44_SBTMSHIGH 0x0F9CUL /* SB Target State High */ --#define SBTMSHIGH_SERR 0x00000001 /* S-error */ --#define SBTMSHIGH_INT 0x00000002 /* Interrupt */ --#define SBTMSHIGH_BUSY 0x00000004 /* Busy */ --#define SBTMSHIGH_GCR 0x20000000 /* Gated Clock Request */ --#define SBTMSHIGH_BISTF 0x40000000 /* BIST Failed */ --#define SBTMSHIGH_BISTD 0x80000000 /* BIST Done */ --#define B44_SBIDHIGH 0x0FFCUL /* SB Identification High */ --#define SBIDHIGH_RC_MASK 0x0000000f /* Revision Code */ --#define SBIDHIGH_CC_MASK 0x0000fff0 /* Core Code */ --#define SBIDHIGH_CC_SHIFT 4 --#define SBIDHIGH_VC_MASK 0xffff0000 /* Vendor Code */ --#define SBIDHIGH_VC_SHIFT 16 -- --/* SSB PCI config space registers. */ --#define SSB_PMCSR 0x44 --#define SSB_PE 0x100 --#define SSB_BAR0_WIN 0x80 --#define SSB_BAR1_WIN 0x84 --#define SSB_SPROM_CONTROL 0x88 --#define SSB_BAR1_CONTROL 0x8c -- --/* SSB core and host control registers. */ --#define SSB_CONTROL 0x0000UL --#define SSB_ARBCONTROL 0x0010UL --#define SSB_ISTAT 0x0020UL --#define SSB_IMASK 0x0024UL --#define SSB_MBOX 0x0028UL --#define SSB_BCAST_ADDR 0x0050UL --#define SSB_BCAST_DATA 0x0054UL --#define SSB_PCI_TRANS_0 0x0100UL --#define SSB_PCI_TRANS_1 0x0104UL --#define SSB_PCI_TRANS_2 0x0108UL --#define SSB_SPROM 0x0800UL -- --#define SSB_PCI_MEM 0x00000000 --#define SSB_PCI_IO 0x00000001 --#define SSB_PCI_CFG0 0x00000002 --#define SSB_PCI_CFG1 0x00000003 --#define SSB_PCI_PREF 0x00000004 --#define SSB_PCI_BURST 0x00000008 --#define SSB_PCI_MASK0 0xfc000000 --#define SSB_PCI_MASK1 0xfc000000 --#define SSB_PCI_MASK2 0xc0000000 -+#define br32(bp, REG) ssb_read32((bp)->sdev, (REG)) -+#define bw32(bp, REG, VAL) ssb_write32((bp)->sdev, (REG), (VAL)) -+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0) - - /* 4400 PHY registers */ - #define B44_MII_AUXCTRL 24 /* Auxiliary Control */ -@@ -346,10 +281,12 @@ - - struct ring_info { - struct sk_buff *skb; -- DECLARE_PCI_UNMAP_ADDR(mapping); -+ dma_addr_t mapping; - }; - - #define B44_MCAST_TABLE_SIZE 32 -+#define B44_PHY_ADDR_NO_PHY 30 -+#define B44_MDC_RATIO 5000000 - - #define B44_STAT_REG_DECLARE \ - _B44(tx_good_octets) \ -@@ -425,9 +362,10 @@ - - u32 dma_offset; - u32 flags; --#define B44_FLAG_B0_ANDLATER 0x00000001 -+#define B44_FLAG_INIT_COMPLETE 0x00000001 - #define B44_FLAG_BUGGY_TXPTR 0x00000002 - #define B44_FLAG_REORDER_BUG 0x00000004 -+#define B44_FLAG_B0_ANDLATER 0x00000008 - #define B44_FLAG_PAUSE_AUTO 0x00008000 - #define B44_FLAG_FULL_DUPLEX 0x00010000 - #define B44_FLAG_100_BASE_T 0x00020000 -@@ -450,8 +388,7 @@ - struct net_device_stats stats; - struct b44_hw_stats hw_stats; - -- void __iomem *regs; -- struct pci_dev *pdev; -+ struct ssb_device *sdev; - struct net_device *dev; - - dma_addr_t rx_ring_dma, tx_ring_dma; ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -1577,7 +1577,7 @@ - - config B44 - tristate "Broadcom 4400 ethernet support" -- depends on NET_PCI && PCI -+ depends on SSB && EXPERIMENTAL - select MII - help - If you have a network (Ethernet) controller of this type, say Y and diff --git a/target/linux/brcm47xx/patches-2.6.23/121-fix_b44_phyaddr.patch b/target/linux/brcm47xx/patches-2.6.23/121-fix_b44_phyaddr.patch deleted file mode 100644 index 7857c5b57c..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/121-fix_b44_phyaddr.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/net/b44.c -+++ b/drivers/net/b44.c -@@ -2273,6 +2273,10 @@ - bp->phy_addr = sdev->bus->sprom.et1phyaddr; - break; - } -+ /* Some ROMs have buggy PHY addresses with the high -+ * bits set (sign extension?). Truncate them to a -+ * valid PHY address. */ -+ bp->phy_addr &= 0x1F; - - memcpy(bp->dev->dev_addr, addr, 6); - diff --git a/target/linux/brcm47xx/patches-2.6.23/130-remove_scache.patch b/target/linux/brcm47xx/patches-2.6.23/130-remove_scache.patch deleted file mode 100644 index 8befbf1a85..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/130-remove_scache.patch +++ /dev/null @@ -1,89 +0,0 @@ ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -192,7 +192,6 @@ - select I8259 - select MIPS_BOARDS_GEN - select MIPS_BONITO64 -- select MIPS_CPU_SCACHE - select PCI_GT64XXX_PCI0 - select MIPS_MSC - select SWAP_IO_SPACE -@@ -1281,13 +1280,6 @@ - bool - select BOARD_SCACHE - --# --# Support for a MIPS32 / MIPS64 style S-caches --# --config MIPS_CPU_SCACHE -- bool -- select BOARD_SCACHE -- - config R5000_CPU_SCACHE - bool - select BOARD_SCACHE ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -701,6 +701,8 @@ - break; - case PRID_IMP_25KF: - c->cputype = CPU_25KF; -+ /* Probe for L2 cache */ -+ c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; - break; - case PRID_IMP_34K: - c->cputype = CPU_34K; ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -1101,7 +1101,6 @@ - - extern int r5k_sc_init(void); - extern int rm7k_sc_init(void); --extern int mips_sc_init(void); - - static void __init setup_scache(void) - { -@@ -1155,29 +1154,17 @@ - #endif - - default: -- if (c->isa_level == MIPS_CPU_ISA_M32R1 || -- c->isa_level == MIPS_CPU_ISA_M32R2 || -- c->isa_level == MIPS_CPU_ISA_M64R1 || -- c->isa_level == MIPS_CPU_ISA_M64R2) { --#ifdef CONFIG_MIPS_CPU_SCACHE -- if (mips_sc_init ()) { -- scache_size = c->scache.ways * c->scache.sets * c->scache.linesz; -- printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n", -- scache_size >> 10, -- way_string[c->scache.ways], c->scache.linesz); -- } --#else -- if (!(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) -- panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); --#endif -- return; -- } - sc_present = 0; - } - - if (!sc_present) - return; - -+ if ((c->isa_level == MIPS_CPU_ISA_M32R1 || -+ c->isa_level == MIPS_CPU_ISA_M64R1) && -+ !(c->scache.flags & MIPS_CACHE_NOT_PRESENT)) -+ panic("Dunno how to handle MIPS32 / MIPS64 second level cache"); -+ - /* compute a couple of other cache variables */ - c->scache.waysize = scache_size / c->scache.ways; - ---- a/arch/mips/mm/Makefile -+++ b/arch/mips/mm/Makefile -@@ -31,6 +31,5 @@ - obj-$(CONFIG_IP22_CPU_SCACHE) += sc-ip22.o - obj-$(CONFIG_R5000_CPU_SCACHE) += sc-r5k.o - obj-$(CONFIG_RM7000_CPU_SCACHE) += sc-rm7k.o --obj-$(CONFIG_MIPS_CPU_SCACHE) += sc-mips.o - - EXTRA_CFLAGS += -Werror diff --git a/target/linux/brcm47xx/patches-2.6.23/150-cpu_fixes.patch b/target/linux/brcm47xx/patches-2.6.23/150-cpu_fixes.patch deleted file mode 100644 index de1dc19f90..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/150-cpu_fixes.patch +++ /dev/null @@ -1,351 +0,0 @@ ---- a/arch/mips/kernel/genex.S -+++ b/arch/mips/kernel/genex.S -@@ -51,6 +51,10 @@ - NESTED(except_vec3_generic, 0, sp) - .set push - .set noat -+#ifdef CONFIG_BCM947XX -+ nop -+ nop -+#endif - #if R5432_CP0_INTERRUPT_WAR - mfc0 k0, CP0_INDEX - #endif ---- a/arch/mips/mm/c-r4k.c -+++ b/arch/mips/mm/c-r4k.c -@@ -30,6 +30,9 @@ - #include /* for run_uncached() */ - - -+/* For enabling BCM4710 cache workarounds */ -+int bcm4710 = 0; -+ - /* - * Special Variant of smp_call_function for use by cache functions: - * -@@ -94,6 +97,9 @@ - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page = blast_dcache_page; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -108,6 +114,9 @@ - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache_page_indexed = blast_dcache_page_indexed; -+ else - if (dc_lsize == 0) - r4k_blast_dcache_page_indexed = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -122,6 +131,9 @@ - { - unsigned long dc_lsize = cpu_dcache_line_size(); - -+ if (bcm4710) -+ r4k_blast_dcache = blast_dcache; -+ else - if (dc_lsize == 0) - r4k_blast_dcache = (void *)cache_noop; - else if (dc_lsize == 16) -@@ -638,6 +650,8 @@ - unsigned long addr = (unsigned long) arg; - - R4600_HIT_CACHEOP_WAR_IMPL; -+ BCM4710_PROTECTED_FILL_TLB(addr); -+ BCM4710_PROTECTED_FILL_TLB(addr + 4); - if (dc_lsize) - protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store && scache_size) -@@ -1213,6 +1227,17 @@ - * silly idea of putting something else there ... - */ - switch (current_cpu_data.cputype) { -+ case CPU_BCM3302: -+ { -+ u32 cm; -+ cm = read_c0_diag(); -+ /* Enable icache */ -+ cm |= (1 << 31); -+ /* Enable dcache */ -+ cm |= (1 << 30); -+ write_c0_diag(cm); -+ } -+ break; - case CPU_R4000PC: - case CPU_R4000SC: - case CPU_R4000MC: -@@ -1243,6 +1268,15 @@ - /* Default cache error handler for R4000 and R5000 family */ - set_uncached_handler (0x100, &except_vec2_generic, 0x80); - -+ /* Check if special workarounds are required */ -+#ifdef CONFIG_BCM947XX -+ if (current_cpu_data.cputype == CPU_BCM4710 && (current_cpu_data.processor_id & 0xff) == 0) { -+ printk("Enabling BCM4710A0 cache workarounds.\n"); -+ bcm4710 = 1; -+ } else -+#endif -+ bcm4710 = 0; -+ - probe_pcache(); - setup_scache(); - -@@ -1288,5 +1322,13 @@ - build_clear_page(); - build_copy_page(); - local_r4k___flush_cache_all(NULL); -+#ifdef CONFIG_BCM947XX -+ { -+ static void (*_coherency_setup)(void); -+ _coherency_setup = (void (*)(void)) KSEG1ADDR(coherency_setup); -+ _coherency_setup(); -+ } -+#else - coherency_setup(); -+#endif - } ---- a/arch/mips/mm/tlbex.c -+++ b/arch/mips/mm/tlbex.c -@@ -1273,6 +1273,9 @@ - /* No need for i_nop */ - } - -+#ifdef CONFIG_BCM947XX -+ i_nop(&p); -+#endif - #ifdef CONFIG_64BIT - build_get_pmde64(&p, &l, &r, K0, K1); /* get pmd in K1 */ - #else -@@ -1708,6 +1711,9 @@ - struct reloc **r, unsigned int pte, - unsigned int ptr) - { -+#ifdef CONFIG_BCM947XX -+ i_nop(p); -+#endif - #ifdef CONFIG_64BIT - build_get_pmde64(p, l, r, pte, ptr); /* get pmd in ptr */ - #else ---- a/include/asm-mips/r4kcache.h -+++ b/include/asm-mips/r4kcache.h -@@ -17,6 +17,20 @@ - #include - #include - -+#ifdef CONFIG_BCM947XX -+#include -+#include -+#define BCM4710_DUMMY_RREG() ((void) *((u8 *) KSEG1ADDR(SSB_ENUM_BASE + SSB_IMSTATE))) -+ -+#define BCM4710_FILL_TLB(addr) (*(volatile unsigned long *)(addr)) -+#define BCM4710_PROTECTED_FILL_TLB(addr) ({ unsigned long x; get_dbe(x, (volatile unsigned long *)(addr)); }) -+#else -+#define BCM4710_DUMMY_RREG() -+ -+#define BCM4710_FILL_TLB(addr) -+#define BCM4710_PROTECTED_FILL_TLB(addr) -+#endif -+ - /* - * This macro return a properly sign-extended address suitable as base address - * for indexed cache operations. Two issues here: -@@ -150,6 +164,7 @@ - static inline void flush_dcache_line_indexed(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Index_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -169,6 +184,7 @@ - static inline void flush_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Writeback_Inv_D, addr); - __dflush_epilogue - } -@@ -176,6 +192,7 @@ - static inline void invalidate_dcache_line(unsigned long addr) - { - __dflush_prologue -+ BCM4710_DUMMY_RREG(); - cache_op(Hit_Invalidate_D, addr); - __dflush_epilogue - } -@@ -208,6 +225,7 @@ - */ - static inline void protected_flush_icache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Invalidate_I, addr); - } - -@@ -219,6 +237,7 @@ - */ - static inline void protected_writeback_dcache_line(unsigned long addr) - { -+ BCM4710_DUMMY_RREG(); - protected_cache_op(Hit_Writeback_Inv_D, addr); - } - -@@ -339,8 +358,52 @@ - : "r" (base), \ - "i" (op)); - -+static inline void blast_dcache(void) -+{ -+ unsigned long start = KSEG0; -+ unsigned long dcache_size = current_cpu_data.dcache.waysize * current_cpu_data.dcache.ways; -+ unsigned long end = (start + dcache_size); -+ -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ -+ BCM4710_FILL_TLB(start); -+ do { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Hit_Writeback_Inv_D, start); -+ start += current_cpu_data.dcache.linesz; -+ } while(start < end); -+} -+ -+static inline void blast_dcache_page_indexed(unsigned long page) -+{ -+ unsigned long start = page; -+ unsigned long end = start + PAGE_SIZE; -+ unsigned long ws_inc = 1UL << current_cpu_data.dcache.waybit; -+ unsigned long ws_end = current_cpu_data.dcache.ways << -+ current_cpu_data.dcache.waybit; -+ unsigned long ws, addr; -+ for (ws = 0; ws < ws_end; ws += ws_inc) { -+ start = page + ws; -+ for (addr = start; addr < end; addr += current_cpu_data.dcache.linesz) { -+ BCM4710_DUMMY_RREG(); -+ cache_op(Index_Writeback_Inv_D, addr); -+ } -+ } -+} -+ -+ - /* build blast_xxx, blast_xxx_page, blast_xxx_page_indexed */ --#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize) \ -+#define __BUILD_BLAST_CACHE(pfx, desc, indexop, hitop, lsize, war) \ - static inline void blast_##pfx##cache##lsize(void) \ - { \ - unsigned long start = INDEX_BASE; \ -@@ -352,6 +415,7 @@ - \ - __##pfx##flush_prologue \ - \ -+ war \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ - for (addr = start; addr < end; addr += lsize * 32) \ - cache##lsize##_unroll32(addr|ws,indexop); \ -@@ -366,6 +430,7 @@ - \ - __##pfx##flush_prologue \ - \ -+ war \ - do { \ - cache##lsize##_unroll32(start,hitop); \ - start += lsize * 32; \ -@@ -384,6 +449,8 @@ - current_cpu_data.desc.waybit; \ - unsigned long ws, addr; \ - \ -+ war \ -+ \ - __##pfx##flush_prologue \ - \ - for (ws = 0; ws < ws_end; ws += ws_inc) \ -@@ -393,28 +460,30 @@ - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16) --__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32) --__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64) --__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 16, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 16, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 16, ) -+__BUILD_BLAST_CACHE(d, dcache, Index_Writeback_Inv_D, Hit_Writeback_Inv_D, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 32, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 32, ) -+__BUILD_BLAST_CACHE(i, icache, Index_Invalidate_I, Hit_Invalidate_I, 64, BCM4710_FILL_TLB(start);) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 64, ) -+__BUILD_BLAST_CACHE(s, scache, Index_Writeback_Inv_SD, Hit_Writeback_Inv_SD, 128, ) - - /* build blast_xxx_range, protected_blast_xxx_range */ --#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot) \ -+#define __BUILD_BLAST_CACHE_RANGE(pfx, desc, hitop, prot, war, war2) \ - static inline void prot##blast_##pfx##cache##_range(unsigned long start, \ - unsigned long end) \ - { \ - unsigned long lsize = cpu_##desc##_line_size(); \ - unsigned long addr = start & ~(lsize - 1); \ - unsigned long aend = (end - 1) & ~(lsize - 1); \ -+ war \ - \ - __##pfx##flush_prologue \ - \ - while (1) { \ -+ war2 \ - prot##cache_op(hitop, addr); \ - if (addr == aend) \ - break; \ -@@ -424,13 +493,13 @@ - __##pfx##flush_epilogue \ - } - --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_) --__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_) --__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, ) --__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D, protected_, BCM4710_PROTECTED_FILL_TLB(addr); BCM4710_PROTECTED_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(i, icache, Hit_Invalidate_I, protected_,, ) -+__BUILD_BLAST_CACHE_RANGE(d, dcache, Hit_Writeback_Inv_D,, BCM4710_FILL_TLB(addr); BCM4710_FILL_TLB(aend);, BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(s, scache, Hit_Writeback_Inv_SD,,, ) - /* blast_inv_dcache_range */ --__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D, ) --__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD, ) -+__BUILD_BLAST_CACHE_RANGE(inv_d, dcache, Hit_Invalidate_D,,,BCM4710_DUMMY_RREG();) -+__BUILD_BLAST_CACHE_RANGE(inv_s, scache, Hit_Invalidate_SD,,, ) - - #endif /* _ASM_R4KCACHE_H */ ---- a/include/asm-mips/stackframe.h -+++ b/include/asm-mips/stackframe.h -@@ -350,6 +350,10 @@ - .macro RESTORE_SP_AND_RET - LONG_L sp, PT_R29(sp) - .set mips3 -+#ifdef CONFIG_BCM947XX -+ nop -+ nop -+#endif - eret - .set mips0 - .endm diff --git a/target/linux/brcm47xx/patches-2.6.23/160-kmap_coherent.patch b/target/linux/brcm47xx/patches-2.6.23/160-kmap_coherent.patch deleted file mode 100644 index 009ec43b82..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/160-kmap_coherent.patch +++ /dev/null @@ -1,57 +0,0 @@ ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -211,7 +211,7 @@ - void *vfrom, *vto; - - vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases && !Page_dcache_dirty(from)) { -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent && !Page_dcache_dirty(from)) { - vfrom = kmap_coherent(from, vaddr); - copy_page(vto, vfrom); - kunmap_coherent(); -@@ -234,7 +234,7 @@ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases) { -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) { - void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(vto, src, len); - kunmap_coherent(); -@@ -250,7 +250,7 @@ - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) - { -- if (cpu_has_dc_aliases) { -+ if (cpu_has_dc_aliases && cpu_use_kmap_coherent) { - void *vfrom = - kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); - memcpy(dst, vfrom, len); ---- /dev/null -+++ b/include/asm-mips/mach-bcm947xx/cpu-feature-overrides.h -@@ -0,0 +1,13 @@ -+/* -+ * This file is subject to the terms and conditions of the GNU General Public -+ * License. See the file "COPYING" in the main directory of this archive -+ * for more details. -+ * -+ * Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org) -+ */ -+#ifndef __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H -+#define __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H -+ -+#define cpu_use_kmap_coherent 0 -+ -+#endif /* __ASM_MACH_BCM947XX_CPU_FEATURE_OVERRIDES_H */ ---- a/include/asm-mips/cpu-features.h -+++ b/include/asm-mips/cpu-features.h -@@ -101,6 +101,9 @@ - #ifndef cpu_has_pindexed_dcache - #define cpu_has_pindexed_dcache (cpu_data[0].dcache.flags & MIPS_CACHE_PINDEX) - #endif -+#ifndef cpu_use_kmap_coherent -+#define cpu_use_kmap_coherent 1 -+#endif - - /* - * I-Cache snoops remote store. This only matters on SMP. Some multiprocessors diff --git a/target/linux/brcm47xx/patches-2.6.23/170-cpu_wait.patch b/target/linux/brcm47xx/patches-2.6.23/170-cpu_wait.patch deleted file mode 100644 index 0ffe59147f..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/170-cpu_wait.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/kernel/cpu-probe.c -+++ b/arch/mips/kernel/cpu-probe.c -@@ -159,6 +159,7 @@ - case CPU_5KC: - case CPU_25KF: - case CPU_PR4450: -+ case CPU_BCM3302: - cpu_wait = r4k_wait; - break; - diff --git a/target/linux/brcm47xx/patches-2.6.23/220-bcm5354.patch b/target/linux/brcm47xx/patches-2.6.23/220-bcm5354.patch deleted file mode 100644 index 732178c5bb..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/220-bcm5354.patch +++ /dev/null @@ -1,42 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -270,6 +270,8 @@ - void ssb_chipco_get_clockcpu(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) -+ return; - *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); - *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - switch (*plltype) { -@@ -293,6 +295,8 @@ - void ssb_chipco_get_clockcontrol(struct ssb_chipcommon *cc, - u32 *plltype, u32 *n, u32 *m) - { -+ if ((chipco_read32(cc, SSB_CHIPCO_CHIPID) & SSB_CHIPCO_IDMASK) == 0x5354) -+ return; - *n = chipco_read32(cc, SSB_CHIPCO_CLOCK_N); - *plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - switch (*plltype) { ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -161,6 +161,8 @@ - - if ((pll_type == SSB_PLLTYPE_5) || (bus->chip_id == 0x5365)) { - rate = 200000000; -+ } else if (bus->chip_id == 0x5354) { -+ rate = 240000000; - } else { - rate = ssb_calc_clock_rate(pll_type, n, m); - } ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -862,6 +862,8 @@ - - if (bus->chip_id == 0x5365) { - rate = 100000000; -+ } else if (bus->chip_id == 0x5354) { -+ rate = 120000000; - } else { - rate = ssb_calc_clock_rate(plltype, clkctl_n, clkctl_m); - if (plltype == SSB_PLLTYPE_3) /* 25Mhz, 2 dividers */ diff --git a/target/linux/brcm47xx/patches-2.6.23/230-ohci-ssb.patch b/target/linux/brcm47xx/patches-2.6.23/230-ohci-ssb.patch deleted file mode 100644 index 19b6a79129..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/230-ohci-ssb.patch +++ /dev/null @@ -1,339 +0,0 @@ -From: Michael Buesch -Date: Wed, 10 Oct 2007 06:47:17 +0000 (-0700) -Subject: USB: ohci SSB bus glue -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=c604e851486eabcbeb73e984279d436ce121fd5d - -USB: ohci SSB bus glue - -This adds SSB bus glue for the USB OHCI HCD. - -Signed-off-by: Michael Buesch -Signed-off-by: John W. Linville -Signed-off-by: David Brownell -Signed-off-by: Greg Kroah-Hartman ---- - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -154,6 +154,19 @@ - Enables support for PCI-bus plug-in USB controller cards. - If unsure, say Y. - -+config USB_OHCI_HCD_SSB -+ bool "OHCI support for Broadcom SSB OHCI core" -+ depends on USB_OHCI_HCD && SSB && EXPERIMENTAL -+ default n -+ ---help--- -+ Support for the Sonics Silicon Backplane (SSB) attached -+ Broadcom USB OHCI core. -+ -+ This device is present in some embedded devices with -+ Broadcom based SSB bus. -+ -+ If unsure, say N. -+ - config USB_OHCI_BIG_ENDIAN_DESC - bool - depends on USB_OHCI_HCD ---- a/drivers/usb/host/ohci-hcd.c -+++ b/drivers/usb/host/ohci-hcd.c -@@ -926,11 +926,17 @@ - #define PS3_SYSTEM_BUS_DRIVER ps3_ohci_driver - #endif - -+#ifdef CONFIG_USB_OHCI_HCD_SSB -+#include "ohci-ssb.c" -+#define SSB_OHCI_DRIVER ssb_ohci_driver -+#endif -+ - #if !defined(PCI_DRIVER) && \ - !defined(PLATFORM_DRIVER) && \ - !defined(OF_PLATFORM_DRIVER) && \ - !defined(SA1111_DRIVER) && \ -- !defined(PS3_SYSTEM_BUS_DRIVER) -+ !defined(PS3_SYSTEM_BUS_DRIVER) && \ -+ !defined(SSB_OHCI_DRIVER) - #error "missing bus glue for ohci-hcd" - #endif - -@@ -975,10 +981,20 @@ - goto error_pci; - #endif - -+#ifdef SSB_OHCI_DRIVER -+ retval = ssb_driver_register(&SSB_OHCI_DRIVER); -+ if (retval) -+ goto error_ssb; -+#endif -+ - return retval; - - /* Error path */ -+#ifdef SSB_OHCI_DRIVER -+ error_ssb: -+#endif - #ifdef PCI_DRIVER -+ pci_unregister_driver(&PCI_DRIVER); - error_pci: - #endif - #ifdef SA1111_DRIVER -@@ -1003,6 +1019,9 @@ - - static void __exit ohci_hcd_mod_exit(void) - { -+#ifdef SSB_OHCI_DRIVER -+ ssb_driver_unregister(&SSB_OHCI_DRIVER); -+#endif - #ifdef PCI_DRIVER - pci_unregister_driver(&PCI_DRIVER); - #endif ---- /dev/null -+++ b/drivers/usb/host/ohci-ssb.c -@@ -0,0 +1,247 @@ -+/* -+ * Sonics Silicon Backplane -+ * Broadcom USB-core OHCI driver -+ * -+ * Copyright 2007 Michael Buesch -+ * -+ * Derived from the OHCI-PCI driver -+ * Copyright 1999 Roman Weissgaerber -+ * Copyright 2000-2002 David Brownell -+ * Copyright 1999 Linus Torvalds -+ * Copyright 1999 Gregory P. Smith -+ * -+ * Derived from the USBcore related parts of Broadcom-SB -+ * Copyright 2005 Broadcom Corporation -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+#include -+ -+ -+#define SSB_OHCI_TMSLOW_HOSTMODE (1 << 29) -+ -+struct ssb_ohci_device { -+ struct ohci_hcd ohci; /* _must_ be at the beginning. */ -+ -+ u32 enable_flags; -+}; -+ -+static inline -+struct ssb_ohci_device *hcd_to_ssb_ohci(struct usb_hcd *hcd) -+{ -+ return (struct ssb_ohci_device *)(hcd->hcd_priv); -+} -+ -+ -+static int ssb_ohci_reset(struct usb_hcd *hcd) -+{ -+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -+ struct ohci_hcd *ohci = &ohcidev->ohci; -+ int err; -+ -+ ohci_hcd_init(ohci); -+ err = ohci_init(ohci); -+ -+ return err; -+} -+ -+static int ssb_ohci_start(struct usb_hcd *hcd) -+{ -+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -+ struct ohci_hcd *ohci = &ohcidev->ohci; -+ int err; -+ -+ err = ohci_run(ohci); -+ if (err < 0) { -+ ohci_err(ohci, "can't start\n"); -+ ohci_stop(hcd); -+ } -+ -+ return err; -+} -+ -+#ifdef CONFIG_PM -+static int ssb_ohci_hcd_suspend(struct usb_hcd *hcd, pm_message_t message) -+{ -+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -+ struct ohci_hcd *ohci = &ohcidev->ohci; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&ohci->lock, flags); -+ -+ ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); -+ ohci_readl(ohci, &ohci->regs->intrdisable); /* commit write */ -+ -+ /* make sure snapshot being resumed re-enumerates everything */ -+ if (message.event == PM_EVENT_PRETHAW) -+ ohci_usb_reset(ohci); -+ -+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ -+ spin_unlock_irqrestore(&ohci->lock, flags); -+ return 0; -+} -+ -+static int ssb_ohci_hcd_resume(struct usb_hcd *hcd) -+{ -+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); -+ usb_hcd_resume_root_hub(hcd); -+ return 0; -+} -+#endif /* CONFIG_PM */ -+ -+static const struct hc_driver ssb_ohci_hc_driver = { -+ .description = "ssb-usb-ohci", -+ .product_desc = "SSB OHCI Controller", -+ .hcd_priv_size = sizeof(struct ssb_ohci_device), -+ -+ .irq = ohci_irq, -+ .flags = HCD_MEMORY | HCD_USB11, -+ -+ .reset = ssb_ohci_reset, -+ .start = ssb_ohci_start, -+ .stop = ohci_stop, -+ .shutdown = ohci_shutdown, -+ -+#ifdef CONFIG_PM -+ .suspend = ssb_ohci_hcd_suspend, -+ .resume = ssb_ohci_hcd_resume, -+#endif -+ -+ .urb_enqueue = ohci_urb_enqueue, -+ .urb_dequeue = ohci_urb_dequeue, -+ .endpoint_disable = ohci_endpoint_disable, -+ -+ .get_frame_number = ohci_get_frame, -+ -+ .hub_status_data = ohci_hub_status_data, -+ .hub_control = ohci_hub_control, -+ .hub_irq_enable = ohci_rhsc_enable, -+ .bus_suspend = ohci_bus_suspend, -+ .bus_resume = ohci_bus_resume, -+ -+ .start_port_reset = ohci_start_port_reset, -+}; -+ -+static void ssb_ohci_detach(struct ssb_device *dev) -+{ -+ struct usb_hcd *hcd = ssb_get_drvdata(dev); -+ -+ usb_remove_hcd(hcd); -+ iounmap(hcd->regs); -+ usb_put_hcd(hcd); -+ ssb_device_disable(dev, 0); -+} -+ -+static int ssb_ohci_attach(struct ssb_device *dev) -+{ -+ struct ssb_ohci_device *ohcidev; -+ struct usb_hcd *hcd; -+ int err = -ENOMEM; -+ u32 tmp, flags = 0; -+ -+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) -+ flags |= SSB_OHCI_TMSLOW_HOSTMODE; -+ -+ ssb_device_enable(dev, flags); -+ -+ hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, -+ dev->dev->bus_id); -+ if (!hcd) -+ goto err_dev_disable; -+ ohcidev = hcd_to_ssb_ohci(hcd); -+ ohcidev->enable_flags = flags; -+ -+ tmp = ssb_read32(dev, SSB_ADMATCH0); -+ hcd->rsrc_start = ssb_admatch_base(tmp); -+ hcd->rsrc_len = ssb_admatch_size(tmp); -+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); -+ if (!hcd->regs) -+ goto err_put_hcd; -+ err = usb_add_hcd(hcd, dev->irq, IRQF_SHARED); -+ if (err) -+ goto err_iounmap; -+ -+ ssb_set_drvdata(dev, hcd); -+ -+ return err; -+ -+err_iounmap: -+ iounmap(hcd->regs); -+err_put_hcd: -+ usb_put_hcd(hcd); -+err_dev_disable: -+ ssb_device_disable(dev, flags); -+ return err; -+} -+ -+static int ssb_ohci_probe(struct ssb_device *dev, -+ const struct ssb_device_id *id) -+{ -+ int err; -+ u16 chipid_top; -+ -+ /* USBcores are only connected on embedded devices. */ -+ chipid_top = (dev->bus->chip_id & 0xFF00); -+ if (chipid_top != 0x4700 && chipid_top != 0x5300) -+ return -ENODEV; -+ -+ /* TODO: Probably need checks here; is the core connected? */ -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ /* We currently always attach SSB_DEV_USB11_HOSTDEV -+ * as HOST OHCI. If we want to attach it as Client device, -+ * we must branch here and call into the (yet to -+ * be written) Client mode driver. Same for remove(). */ -+ -+ err = ssb_ohci_attach(dev); -+ -+ return err; -+} -+ -+static void ssb_ohci_remove(struct ssb_device *dev) -+{ -+ ssb_ohci_detach(dev); -+} -+ -+#ifdef CONFIG_PM -+ -+static int ssb_ohci_suspend(struct ssb_device *dev, pm_message_t state) -+{ -+ ssb_device_disable(dev, 0); -+ -+ return 0; -+} -+ -+static int ssb_ohci_resume(struct ssb_device *dev) -+{ -+ struct usb_hcd *hcd = ssb_get_drvdata(dev); -+ struct ssb_ohci_device *ohcidev = hcd_to_ssb_ohci(hcd); -+ -+ ssb_device_enable(dev, ohcidev->enable_flags); -+ -+ return 0; -+} -+ -+#else /* !CONFIG_PM */ -+#define ssb_ohci_suspend NULL -+#define ssb_ohci_resume NULL -+#endif /* CONFIG_PM */ -+ -+static const struct ssb_device_id ssb_ohci_table[] = { -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), -+ SSB_DEVTABLE_END -+}; -+MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); -+ -+static struct ssb_driver ssb_ohci_driver = { -+ .name = KBUILD_MODNAME, -+ .id_table = ssb_ohci_table, -+ .probe = ssb_ohci_probe, -+ .remove = ssb_ohci_remove, -+ .suspend = ssb_ohci_suspend, -+ .resume = ssb_ohci_resume, -+}; diff --git a/target/linux/brcm47xx/patches-2.6.23/240-ohci-ssb-pm.patch b/target/linux/brcm47xx/patches-2.6.23/240-ohci-ssb-pm.patch deleted file mode 100644 index 4aeefdb788..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/240-ohci-ssb-pm.patch +++ /dev/null @@ -1,28 +0,0 @@ -From: Al Viro -Date: Sat, 13 Oct 2007 21:29:47 +0000 (+0100) -Subject: Fix ohci-ssb with !CONFIG_PM -X-Git-Tag: linux-2.6.24-rc1~57^2~38 -X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Fralf%2Flinux.git;a=commitdiff_plain;h=4735b37cf434175c2b7b36b3b68f1e60e8ec8527;hp=d773b33972a663cfaf066e966f87922a74088a1e - -Fix ohci-ssb with !CONFIG_PM - -ohci_bus_{suspend,resume} exists only if we have CONFIG_PM; do the same -thing as other subdrivers... - -Signed-off-by: Al Viro -Signed-off-by: Linus Torvalds ---- - ---- a/drivers/usb/host/ohci-ssb.c -+++ b/drivers/usb/host/ohci-ssb.c -@@ -117,8 +117,10 @@ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - .hub_irq_enable = ohci_rhsc_enable, -+#ifdef CONFIG_PM - .bus_suspend = ohci_bus_suspend, - .bus_resume = ohci_bus_resume, -+#endif - - .start_port_reset = ohci_start_port_reset, - }; diff --git a/target/linux/brcm47xx/patches-2.6.23/250-ohci-ssb-usb2.patch b/target/linux/brcm47xx/patches-2.6.23/250-ohci-ssb-usb2.patch deleted file mode 100644 index b59e41f511..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/250-ohci-ssb-usb2.patch +++ /dev/null @@ -1,72 +0,0 @@ ---- a/drivers/usb/host/ohci-ssb.c -+++ b/drivers/usb/host/ohci-ssb.c -@@ -142,10 +142,59 @@ - int err = -ENOMEM; - u32 tmp, flags = 0; - -- if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) -+ /* -+ * THE FOLLOWING COMMENTS PRESERVED FROM GPL SOURCE RELEASE -+ * -+ * The USB core requires a special bit to be set during core -+ * reset to enable host (OHCI) mode. Resetting the SB core in -+ * pcibios_enable_device() is a hack for compatibility with -+ * vanilla usb-ohci so that it does not have to know about -+ * SB. A driver that wants to use the USB core in device mode -+ * should know about SB and should reset the bit back to 0 -+ * after calling pcibios_enable_device(). -+ */ -+ -+ if (dev->id.coreid == SSB_DEV_USB11_HOSTDEV) { - flags |= SSB_OHCI_TMSLOW_HOSTMODE; -+ ssb_device_enable(dev, flags); -+ } -+ -+ /* -+ * USB 2.0 special considerations: -+ * -+ * 1. Since the core supports both OHCI and EHCI functions, it must -+ * only be reset once. -+ * -+ * 2. In addition to the standard SB reset sequence, the Host Control -+ * Register must be programmed to bring the USB core and various -+ * phy components out of reset. -+ */ -+ -+ else if (dev->id.coreid == SSB_DEV_USB20_HOST) { -+#warning FIX ME need test for core being up & exit -+ ssb_device_enable(dev, 0); -+ ssb_write32(dev, 0x200, 0x7ff); -+ udelay(1); -+ if (dev->id.revision == 1) { // bug in rev 1 -+ -+ /* Change Flush control reg */ -+ tmp = ssb_read32(dev, 0x400); -+ tmp &= ~8; -+ ssb_write32(dev, 0x400, tmp); -+ tmp = ssb_read32(dev, 0x400); -+ printk("USB20H fcr: 0x%0x\n", tmp); -+ -+ /* Change Shim control reg */ -+ tmp = ssb_read32(dev, 0x304); -+ tmp &= ~0x100; -+ ssb_write32(dev, 0x304, tmp); -+ tmp = ssb_read32(dev, 0x304); -+ printk("USB20H shim: 0x%0x\n", tmp); -+ } -+ } -+ else -+ ssb_device_enable(dev, 0); - -- ssb_device_enable(dev, flags); - - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, - dev->dev->bus_id); -@@ -235,6 +284,7 @@ - static const struct ssb_device_id ssb_ohci_table[] = { - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOSTDEV, SSB_ANY_REV), - SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB11_HOST, SSB_ANY_REV), -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_USB20_HOST, SSB_ANY_REV), - SSB_DEVTABLE_END - }; - MODULE_DEVICE_TABLE(ssb, ssb_ohci_table); diff --git a/target/linux/brcm47xx/patches-2.6.23/260-ohci-set-dma-mask.patch b/target/linux/brcm47xx/patches-2.6.23/260-ohci-set-dma-mask.patch deleted file mode 100644 index 21fac47407..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/260-ohci-set-dma-mask.patch +++ /dev/null @@ -1,14 +0,0 @@ ---- a/drivers/usb/host/ohci-ssb.c -+++ b/drivers/usb/host/ohci-ssb.c -@@ -195,6 +195,11 @@ - else - ssb_device_enable(dev, 0); - -+ /* -+ * Set dma mask - 32 bit mask is just an assumption -+ */ -+ if (ssb_dma_set_mask(dev, DMA_32BIT_MASK)) -+ return -EOPNOTSUPP; - - hcd = usb_create_hcd(&ssb_ohci_hc_driver, dev->dev, - dev->dev->bus_id); diff --git a/target/linux/brcm47xx/patches-2.6.23/300-fork_cacheflush.patch b/target/linux/brcm47xx/patches-2.6.23/300-fork_cacheflush.patch deleted file mode 100644 index f5b5d77682..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/300-fork_cacheflush.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/include/asm-mips/cacheflush.h -+++ b/include/asm-mips/cacheflush.h -@@ -32,7 +32,7 @@ - extern void (*flush_cache_all)(void); - extern void (*__flush_cache_all)(void); - extern void (*flush_cache_mm)(struct mm_struct *mm); --#define flush_cache_dup_mm(mm) do { (void) (mm); } while (0) -+#define flush_cache_dup_mm(mm) flush_cache_mm(mm) - extern void (*flush_cache_range)(struct vm_area_struct *vma, - unsigned long start, unsigned long end); - extern void (*flush_cache_page)(struct vm_area_struct *vma, unsigned long page, unsigned long pfn); diff --git a/target/linux/brcm47xx/patches-2.6.23/310-no_highpage.patch b/target/linux/brcm47xx/patches-2.6.23/310-no_highpage.patch deleted file mode 100644 index 411ebdbf9c..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/310-no_highpage.patch +++ /dev/null @@ -1,67 +0,0 @@ ---- a/arch/mips/mm/init.c -+++ b/arch/mips/mm/init.c -@@ -205,31 +205,6 @@ - preempt_check_resched(); - } - --void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma) --{ -- void *vfrom, *vto; -- -- vto = kmap_atomic(to, KM_USER1); -- if (cpu_has_dc_aliases && cpu_use_kmap_coherent && !Page_dcache_dirty(from)) { -- vfrom = kmap_coherent(from, vaddr); -- copy_page(vto, vfrom); -- kunmap_coherent(); -- } else { -- vfrom = kmap_atomic(from, KM_USER0); -- copy_page(vto, vfrom); -- kunmap_atomic(vfrom, KM_USER0); -- } -- if (((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) || -- pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -- flush_data_cache_page((unsigned long)vto); -- kunmap_atomic(vto, KM_USER1); -- /* Make sure this page is cleared on other CPU's too before using it */ -- smp_wmb(); --} -- --EXPORT_SYMBOL(copy_user_highpage); -- - void copy_to_user_page(struct vm_area_struct *vma, - struct page *page, unsigned long vaddr, void *dst, const void *src, - unsigned long len) ---- a/include/asm-mips/page.h -+++ b/include/asm-mips/page.h -@@ -35,6 +35,7 @@ - #ifndef __ASSEMBLY__ - - #include -+#include - #include - - /* -@@ -67,13 +68,16 @@ - flush_data_cache_page((unsigned long)addr); - } - --extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -- struct page *to); --struct vm_area_struct; --extern void copy_user_highpage(struct page *to, struct page *from, -- unsigned long vaddr, struct vm_area_struct *vma); -+static inline void copy_user_page(void *vto, void *vfrom, unsigned long vaddr, -+ struct page *to) -+{ -+ extern void (*flush_data_cache_page)(unsigned long addr); - --#define __HAVE_ARCH_COPY_USER_HIGHPAGE -+ copy_page(vto, vfrom); -+ if (!cpu_has_ic_fills_f_dc || -+ pages_do_alias((unsigned long)vto, vaddr & PAGE_MASK)) -+ flush_data_cache_page((unsigned long)vto); -+} - - /* - * These are used to make use of C type-checking.. diff --git a/target/linux/brcm47xx/patches-2.6.23/410-aec62xx_pci_enable.patch b/target/linux/brcm47xx/patches-2.6.23/410-aec62xx_pci_enable.patch deleted file mode 100644 index 4e57ecbdaf..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/410-aec62xx_pci_enable.patch +++ /dev/null @@ -1,31 +0,0 @@ ---- a/drivers/ide/pci/aec62xx.c -+++ b/drivers/ide/pci/aec62xx.c -@@ -248,7 +248,14 @@ - - static int __devinit init_setup_aec6x80(struct pci_dev *dev, ide_pci_device_t *d) - { -- unsigned long dma_base = pci_resource_start(dev, 4); -+ unsigned long dma_base; -+ int err; -+ -+ err = pci_enable_device(dev); -+ if (err) -+ return err; -+ -+ dma_base = pci_resource_start(dev, 4); - - if (inb(dma_base + 2) & 0x10) { - d->name = (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R) ? -@@ -256,7 +263,11 @@ - d->udma_mask = 0x7f; /* udma0-6 */ - } - -- return ide_setup_pci_device(dev, d); -+ err = ide_setup_pci_device(dev, d); -+ if(err) -+ pci_disable_device(dev); -+ -+ return err; - } - - static ide_pci_device_t aec62xx_chipsets[] __devinitdata = { diff --git a/target/linux/brcm47xx/patches-2.6.23/500-lzma_initramfs.patch b/target/linux/brcm47xx/patches-2.6.23/500-lzma_initramfs.patch deleted file mode 100644 index a2e4c2b85c..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/500-lzma_initramfs.patch +++ /dev/null @@ -1,117 +0,0 @@ ---- a/scripts/gen_initramfs_list.sh -+++ b/scripts/gen_initramfs_list.sh -@@ -287,7 +287,7 @@ - if [ "${is_cpio_compressed}" = "compressed" ]; then - cat ${cpio_tfile} > ${output_file} - else -- cat ${cpio_tfile} | gzip -f -9 - > ${output_file} -+ lzma e -lc1 -lp2 -pb2 ${cpio_tfile} ${output_file} - fi - [ -z ${cpio_file} ] && rm ${cpio_tfile} - fi ---- a/init/initramfs.c -+++ b/init/initramfs.c -@@ -441,6 +441,69 @@ - outcnt = 0; - } - -+#include -+static int __init lzma_unzip(void) -+{ -+ unsigned int i; /* temp value */ -+ unsigned int lc; /* literal context bits */ -+ unsigned int lp; /* literal pos state bits */ -+ unsigned int pb; /* pos state bits */ -+ unsigned int osize; /* uncompressed size */ -+ unsigned char *workspace; -+ unsigned char* outputbuffer; -+ unsigned int outsizeProcessed = 0; -+ int workspace_size; -+ int res; -+ -+ // lzma args -+ i = get_byte(); -+ lc = i % 9, i = i / 9; -+ lp = i % 5, pb = i / 5; -+ -+ // skip dictionary size -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ /* read the lower half of uncompressed size in the header */ -+ osize = ((unsigned int)get_byte()) + -+ ((unsigned int)get_byte() << 8) + -+ ((unsigned int)get_byte() << 16) + -+ ((unsigned int)get_byte() << 24); -+ -+ /* skip rest of the header (upper half of uncompressed size) */ -+ for (i = 0; i < 4; i++) -+ get_byte(); -+ -+ workspace_size = ((LZMA_BASE_SIZE + (LZMA_LIT_SIZE << (lc + lp))) * sizeof(CProb)) + 100; -+ printk( KERN_NOTICE "initramfs: LZMA lc=%d,lp=%d,pb=%d,origSize=%d\n", -+ lc,lp,pb,osize); -+ outputbuffer = kmalloc(osize, GFP_KERNEL); -+ if (outputbuffer == 0) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma output buffer\n"); -+ return -1; -+ } -+ -+ workspace = kmalloc(workspace_size, GFP_KERNEL); -+ if (workspace == NULL) { -+ printk(KERN_ERR "initramfs: Couldn't allocate lzma workspace\n"); -+ return -1; -+ } -+ -+ res = LzmaDecode(workspace, workspace_size, lc, lp, pb, inbuf + inptr, insize - inptr, outputbuffer, osize, &outsizeProcessed); -+ if( res != 0 ) { -+ panic( KERN_ERR "initramfs: Lzma decode failure\n"); -+ return -1; -+ } -+ -+ flush_buffer(outputbuffer, outsizeProcessed); -+ inptr = insize; -+ -+ kfree(outputbuffer); -+ kfree(workspace); -+ state = Reset; -+ return 0; -+} -+ - static char * __init unpack_to_rootfs(char *buf, unsigned len, int check_only) - { - int written; -@@ -475,12 +538,28 @@ - inptr = 0; - outcnt = 0; /* bytes in output buffer */ - bytes_out = 0; -- crc = (ulg)0xffffffffL; /* shift register contents */ -- makecrc(); -- gunzip(); -- if (state != Reset) -+ if( inbuf[0] == 037 && ((inbuf[1] == 0213) || (inbuf[1] == 0236))) -+ { -+ printk( KERN_NOTICE "detected gzip initramfs\n"); -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ if (state != Reset) - error("junk in gzipped archive"); -- this_header = saved_offset + inptr; -+ } -+ else if(!memcmp(inbuf+1, "\x00\x00\x80\x00", 4)) /* FIXME: hardcoded dictionary size */ -+ { -+ printk( KERN_NOTICE "detected lzma initramfs\n"); -+ lzma_unzip(); -+ } -+ else -+ { -+ // skip forward ? -+ crc = (ulg)0xffffffffL; /* shift register contents */ -+ makecrc(); -+ gunzip(); -+ } -+ this_header = saved_offset + inptr; - buf += inptr; - len -= inptr; - } diff --git a/target/linux/brcm47xx/patches-2.6.23/600-ssb-fix-pcidevices.patch b/target/linux/brcm47xx/patches-2.6.23/600-ssb-fix-pcidevices.patch deleted file mode 100644 index bcc61ac957..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/600-ssb-fix-pcidevices.patch +++ /dev/null @@ -1,63 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -66,6 +66,7 @@ - base = &ssb_pcicore_pcibus_iobase; - else - base = &ssb_pcicore_pcibus_membase; -+ res->flags |= IORESOURCE_PCI_FIXED; - if (res->end) { - size = res->end - res->start + 1; - if (*base & (size - 1)) -@@ -88,10 +89,12 @@ - - static void __init ssb_fixup_pcibridge(struct pci_dev *dev) - { -+ u8 lat; -+ - if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) - return; - -- ssb_printk(KERN_INFO "PCI: fixing up bridge\n"); -+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); - - /* Enable PCI bridge bus mastering and memory space */ - pci_set_master(dev); -@@ -101,7 +104,10 @@ - pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); - - /* Make sure our latency is high enough to handle the devices behind us */ -- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xa8); -+ lat = 168; -+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", -+ pci_name(dev), lat); -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); - } - DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); - -@@ -279,14 +285,14 @@ - .name = "SSB PCIcore external memory", - .start = SSB_PCI_DMA, - .end = SSB_PCI_DMA + SSB_PCI_DMA_SZ - 1, -- .flags = IORESOURCE_MEM, -+ .flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED, - }; - - static struct resource ssb_pcicore_io_resource = { - .name = "SSB PCIcore external I/O", - .start = 0x100, - .end = 0x7FF, -- .flags = IORESOURCE_IO, -+ .flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED, - }; - - static struct pci_controller ssb_pcicore_controller = { -@@ -344,7 +350,8 @@ - /* Ok, ready to run, register it to the system. - * The following needs change, if we want to port hostmode - * to non-MIPS platform. */ -- set_io_port_base((unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000)); -+ ssb_pcicore_controller.io_map_base = (unsigned long)ioremap_nocache(SSB_PCI_MEM, 0x04000000); -+ set_io_port_base(ssb_pcicore_controller.io_map_base); - /* Give some time to the PCI controller to configure itself with the new - * values. Not waiting at this point causes crashes of the machine. */ - mdelay(10); diff --git a/target/linux/brcm47xx/patches-2.6.23/601-mips-remove-pci-collision-check.patch b/target/linux/brcm47xx/patches-2.6.23/601-mips-remove-pci-collision-check.patch deleted file mode 100644 index 5597ed5529..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/601-mips-remove-pci-collision-check.patch +++ /dev/null @@ -1,19 +0,0 @@ -The SSB pcicore driver does create some MMIO resource collisions. -However, the pcicore PCI-fixup routine fixes these collisions afterwards. -Remove this sanity check for now until we find a better solution. ---mb ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -177,10 +177,8 @@ - continue; - - r = &dev->resource[idx]; -- if (!r->start && r->end) { -- printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); -- return -EINVAL; -- } -+ if (!r->start && r->end) -+ printk(KERN_WARNING "PCI: Device %s resource collisions detected. Ignoring...\n", pci_name(dev)); - if (r->flags & IORESOURCE_IO) - cmd |= PCI_COMMAND_IO; - if (r->flags & IORESOURCE_MEM) diff --git a/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch b/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch deleted file mode 100644 index a2857fecbb..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/602-ssb-fix-serial-on-new-devices.patch +++ /dev/null @@ -1,86 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -403,6 +403,7 @@ - unsigned int irq; - u32 baud_base, div; - u32 i, n; -+ unsigned int ccrev = cc->dev->id.revision; - - plltype = (cc->capabilities & SSB_CHIPCO_CAP_PLLT); - irq = ssb_mips_irq(cc->dev); -@@ -414,14 +415,39 @@ - chipco_read32(cc, SSB_CHIPCO_CLOCK_M2)); - div = 1; - } else { -- if (cc->dev->id.revision >= 11) { -+ if (ccrev == 20) { -+ /* BCM5354 uses constant 25MHz clock */ -+ baud_base = 25000000; -+ div = 48; -+ /* Set the override bit so we don't divide it */ -+ chipco_write32(cc, SSB_CHIPCO_CORECTL, -+ chipco_read32(cc, SSB_CHIPCO_CORECTL) -+ | SSB_CHIPCO_CORECTL_UARTCLK0); -+ } else if ((ccrev >= 11) && (ccrev != 15)) { - /* Fixed ALP clock */ - baud_base = 20000000; -+ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { -+ /* FIXME: baud_base is different for devices with a PMU */ -+ SSB_WARN_ON(1); -+ } - div = 1; -+ if (ccrev >= 21) { -+ /* Turn off UART clock before switching clocksource. */ -+ chipco_write32(cc, SSB_CHIPCO_CORECTL, -+ chipco_read32(cc, SSB_CHIPCO_CORECTL) -+ & ~SSB_CHIPCO_CORECTL_UARTCLKEN); -+ } - /* Set the override bit so we don't divide it */ - chipco_write32(cc, SSB_CHIPCO_CORECTL, -- SSB_CHIPCO_CORECTL_UARTCLK0); -- } else if (cc->dev->id.revision >= 3) { -+ chipco_read32(cc, SSB_CHIPCO_CORECTL) -+ | SSB_CHIPCO_CORECTL_UARTCLK0); -+ if (ccrev >= 21) { -+ /* Re-enable the UART clock. */ -+ chipco_write32(cc, SSB_CHIPCO_CORECTL, -+ chipco_read32(cc, SSB_CHIPCO_CORECTL) -+ | SSB_CHIPCO_CORECTL_UARTCLKEN); -+ } -+ } else if (ccrev >= 3) { - /* Internal backplane clock */ - baud_base = ssb_clockspeed(bus); - div = chipco_read32(cc, SSB_CHIPCO_CLKDIV) -@@ -433,7 +459,7 @@ - } - - /* Clock source depends on strapping if UartClkOverride is unset */ -- if ((cc->dev->id.revision > 0) && -+ if ((ccrev > 0) && - !(chipco_read32(cc, SSB_CHIPCO_CORECTL) & SSB_CHIPCO_CORECTL_UARTCLK0)) { - if ((cc->capabilities & SSB_CHIPCO_CAP_UARTCLK) == - SSB_CHIPCO_CAP_UARTCLK_INT) { -@@ -455,7 +481,7 @@ - cc_mmio = cc->dev->bus->mmio + (cc->dev->core_index * SSB_CORE_SIZE); - uart_regs = cc_mmio + SSB_CHIPCO_UART0_DATA; - /* Offset changed at after rev 0 */ -- if (cc->dev->id.revision == 0) -+ if (ccrev == 0) - uart_regs += (i * 8); - else - uart_regs += (i * 256); ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -51,9 +51,12 @@ - #define SSB_CHIPCO_CAP_JTAGM 0x00400000 /* JTAG master present */ - #define SSB_CHIPCO_CAP_BROM 0x00800000 /* Internal boot ROM active */ - #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ -+#define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ -+#define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ - #define SSB_CHIPCO_CORECTL 0x0008 - #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ - #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -+#define SSB_CHIPCO_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ - #define SSB_CHIPCO_BIST 0x000C - #define SSB_CHIPCO_OTPS 0x0010 /* OTP status */ - #define SSB_CHIPCO_OTPS_PROGFAIL 0x80000000 diff --git a/target/linux/brcm47xx/patches-2.6.23/610-ssb-watchdog-fix.patch b/target/linux/brcm47xx/patches-2.6.23/610-ssb-watchdog-fix.patch deleted file mode 100644 index f0a8772ced..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/610-ssb-watchdog-fix.patch +++ /dev/null @@ -1,119 +0,0 @@ ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -105,6 +105,12 @@ - - If unsure, say N - -+# Assumption: We are on embedded, if we compile the MIPS core. -+config SSB_EMBEDDED -+ bool -+ depends on SSB_DRIVER_MIPS -+ default y -+ - config SSB_DRIVER_EXTIF - bool "SSB Broadcom EXTIF core driver (EXPERIMENTAL)" - depends on SSB_DRIVER_MIPS && EXPERIMENTAL ---- a/drivers/ssb/Makefile -+++ b/drivers/ssb/Makefile -@@ -1,5 +1,6 @@ - # core - ssb-y += main.o scan.o -+ssb-$(CONFIG_SSB_EMBEDDED) += embedded.o - - # host support - ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o ---- a/drivers/ssb/driver_extif.c -+++ b/drivers/ssb/driver_extif.c -@@ -37,6 +37,12 @@ - return value; - } - -+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, -+ u32 ticks) -+{ -+ extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks); -+} -+ - #ifdef CONFIG_SSB_SERIAL - static bool serial_exists(u8 *regs) - { ---- /dev/null -+++ b/drivers/ssb/embedded.c -@@ -0,0 +1,26 @@ -+/* -+ * Sonics Silicon Backplane -+ * Embedded systems support code -+ * -+ * Copyright 2005-2008, Broadcom Corporation -+ * Copyright 2006-2008, Michael Buesch -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+ -+ -+int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks) -+{ -+ if (ssb_chipco_available(&bus->chipco)) { -+ ssb_chipco_watchdog_timer_set(&bus->chipco, ticks); -+ return 0; -+ } -+ if (ssb_extif_available(&bus->extif)) { -+ ssb_extif_watchdog_timer_set(&bus->extif, ticks); -+ return 0; -+ } -+ return -ENODEV; -+} ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -360,6 +360,11 @@ - u16 fast_pwrup_delay; - }; - -+static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) -+{ -+ return (cc->dev != NULL); -+} -+ - extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); - - #include ---- a/include/linux/ssb/ssb_driver_extif.h -+++ b/include/linux/ssb/ssb_driver_extif.h -@@ -178,6 +178,9 @@ - u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value); - u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value); - -+extern void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, -+ u32 ticks); -+ - #ifdef CONFIG_SSB_SERIAL - extern int ssb_extif_serial_init(struct ssb_extif *extif, - struct ssb_serial_port *ports); -@@ -201,5 +204,11 @@ - { - } - -+static inline -+void ssb_extif_watchdog_timer_set(struct ssb_extif *extif, -+ u32 ticks) -+{ -+} -+ - #endif /* CONFIG_SSB_DRIVER_EXTIF */ - #endif /* LINUX_SSB_EXTIFCORE_H_ */ ---- /dev/null -+++ b/include/linux/ssb/ssb_embedded.h -@@ -0,0 +1,10 @@ -+#ifndef LINUX_SSB_EMBEDDED_H_ -+#define LINUX_SSB_EMBEDDED_H_ -+ -+#include -+#include -+ -+ -+extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks); -+ -+#endif /* LINUX_SSB_EMBEDDED_H_ */ diff --git a/target/linux/brcm47xx/patches-2.6.23/620-ssb-modinit-fix.patch b/target/linux/brcm47xx/patches-2.6.23/620-ssb-modinit-fix.patch deleted file mode 100644 index 3b0e6f6a43..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/620-ssb-modinit-fix.patch +++ /dev/null @@ -1,13 +0,0 @@ ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1163,7 +1163,9 @@ - /* ssb must be initialized after PCI but before the ssb drivers. - * That means we must use some initcall between subsys_initcall - * and device_initcall. */ --fs_initcall(ssb_modinit); -+//FIXME on embedded we need to be early to make sure we can register -+// a new PCI bus, if needed. -+subsys_initcall(ssb_modinit); - - static void __exit ssb_modexit(void) - { diff --git a/target/linux/brcm47xx/patches-2.6.23/621-ssb-common-gpio-api.patch b/target/linux/brcm47xx/patches-2.6.23/621-ssb-common-gpio-api.patch deleted file mode 100644 index ca0699122c..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/621-ssb-common-gpio-api.patch +++ /dev/null @@ -1,233 +0,0 @@ ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -361,37 +361,31 @@ - { - return chipco_read32(cc, SSB_CHIPCO_GPIOIN) & mask; - } --EXPORT_SYMBOL(ssb_chipco_gpio_in); - - u32 ssb_chipco_gpio_out(struct ssb_chipcommon *cc, u32 mask, u32 value) - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUT, mask, value); - } --EXPORT_SYMBOL(ssb_chipco_gpio_out); - - u32 ssb_chipco_gpio_outen(struct ssb_chipcommon *cc, u32 mask, u32 value) - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOOUTEN, mask, value); - } --EXPORT_SYMBOL(ssb_chipco_gpio_outen); - - u32 ssb_chipco_gpio_control(struct ssb_chipcommon *cc, u32 mask, u32 value) - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); - } --EXPORT_SYMBOL(ssb_chipco_gpio_control); - - u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOIRQ, mask, value); - } --EXPORT_SYMBOL(ssb_chipco_gpio_intmask); - - u32 ssb_chipco_gpio_polarity(struct ssb_chipcommon *cc, u32 mask, u32 value) - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOPOL, mask, value); - } --EXPORT_SYMBOL(ssb_chipco_gpio_polarity); - - #ifdef CONFIG_SSB_SERIAL - int ssb_chipco_serial_init(struct ssb_chipcommon *cc, ---- a/drivers/ssb/driver_extif.c -+++ b/drivers/ssb/driver_extif.c -@@ -122,30 +122,25 @@ - { - return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask; - } --EXPORT_SYMBOL(ssb_extif_gpio_in); - - u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value) - { - return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0), - mask, value); - } --EXPORT_SYMBOL(ssb_extif_gpio_out); - - u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value) - { - return extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0), - mask, value); - } --EXPORT_SYMBOL(ssb_extif_gpio_outen); - - u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value) - { - return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value); - } --EXPORT_SYMBOL(ssb_extif_gpio_polarity); - - u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value) - { - return extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value); - } --EXPORT_SYMBOL(ssb_extif_gpio_intmask); ---- a/drivers/ssb/embedded.c -+++ b/drivers/ssb/embedded.c -@@ -11,6 +11,8 @@ - #include - #include - -+#include "ssb_private.h" -+ - - int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks) - { -@@ -24,3 +26,107 @@ - } - return -ENODEV; - } -+ -+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&bus->gpio_lock, flags); -+ if (ssb_chipco_available(&bus->chipco)) -+ res = ssb_chipco_gpio_in(&bus->chipco, mask); -+ else if (ssb_extif_available(&bus->extif)) -+ res = ssb_extif_gpio_in(&bus->extif, mask); -+ else -+ SSB_WARN_ON(1); -+ spin_unlock_irqrestore(&bus->gpio_lock, flags); -+ -+ return res; -+} -+EXPORT_SYMBOL(ssb_gpio_in); -+ -+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&bus->gpio_lock, flags); -+ if (ssb_chipco_available(&bus->chipco)) -+ res = ssb_chipco_gpio_out(&bus->chipco, mask, value); -+ else if (ssb_extif_available(&bus->extif)) -+ res = ssb_extif_gpio_out(&bus->extif, mask, value); -+ else -+ SSB_WARN_ON(1); -+ spin_unlock_irqrestore(&bus->gpio_lock, flags); -+ -+ return res; -+} -+EXPORT_SYMBOL(ssb_gpio_out); -+ -+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&bus->gpio_lock, flags); -+ if (ssb_chipco_available(&bus->chipco)) -+ res = ssb_chipco_gpio_outen(&bus->chipco, mask, value); -+ else if (ssb_extif_available(&bus->extif)) -+ res = ssb_extif_gpio_outen(&bus->extif, mask, value); -+ else -+ SSB_WARN_ON(1); -+ spin_unlock_irqrestore(&bus->gpio_lock, flags); -+ -+ return res; -+} -+EXPORT_SYMBOL(ssb_gpio_outen); -+ -+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&bus->gpio_lock, flags); -+ if (ssb_chipco_available(&bus->chipco)) -+ res = ssb_chipco_gpio_control(&bus->chipco, mask, value); -+ spin_unlock_irqrestore(&bus->gpio_lock, flags); -+ -+ return res; -+} -+EXPORT_SYMBOL(ssb_gpio_control); -+ -+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&bus->gpio_lock, flags); -+ if (ssb_chipco_available(&bus->chipco)) -+ res = ssb_chipco_gpio_intmask(&bus->chipco, mask, value); -+ else if (ssb_extif_available(&bus->extif)) -+ res = ssb_extif_gpio_intmask(&bus->extif, mask, value); -+ else -+ SSB_WARN_ON(1); -+ spin_unlock_irqrestore(&bus->gpio_lock, flags); -+ -+ return res; -+} -+EXPORT_SYMBOL(ssb_gpio_intmask); -+ -+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value) -+{ -+ unsigned long flags; -+ u32 res = 0; -+ -+ spin_lock_irqsave(&bus->gpio_lock, flags); -+ if (ssb_chipco_available(&bus->chipco)) -+ res = ssb_chipco_gpio_polarity(&bus->chipco, mask, value); -+ else if (ssb_extif_available(&bus->extif)) -+ res = ssb_extif_gpio_polarity(&bus->extif, mask, value); -+ else -+ SSB_WARN_ON(1); -+ spin_unlock_irqrestore(&bus->gpio_lock, flags); -+ -+ return res; -+} -+EXPORT_SYMBOL(ssb_gpio_polarity); ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -283,6 +283,11 @@ - /* Contents of the SPROM. */ - struct ssb_sprom sprom; - -+#ifdef CONFIG_SSB_EMBEDDED -+ /* Lock for GPIO register access. */ -+ spinlock_t gpio_lock; -+#endif /* EMBEDDED */ -+ - /* Internal-only stuff follows. Do not touch. */ - struct list_head list; - #ifdef CONFIG_SSB_DEBUG ---- a/include/linux/ssb/ssb_embedded.h -+++ b/include/linux/ssb/ssb_embedded.h -@@ -7,4 +7,12 @@ - - extern int ssb_watchdog_timer_set(struct ssb_bus *bus, u32 ticks); - -+/* Generic GPIO API */ -+u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask); -+u32 ssb_gpio_out(struct ssb_bus *bus, u32 mask, u32 value); -+u32 ssb_gpio_outen(struct ssb_bus *bus, u32 mask, u32 value); -+u32 ssb_gpio_control(struct ssb_bus *bus, u32 mask, u32 value); -+u32 ssb_gpio_intmask(struct ssb_bus *bus, u32 mask, u32 value); -+u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value); -+ - #endif /* LINUX_SSB_EMBEDDED_H_ */ ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -571,6 +571,9 @@ - - spin_lock_init(&bus->bar_lock); - INIT_LIST_HEAD(&bus->list); -+#ifdef CONFIG_SSB_EMBEDDED -+ spin_lock_init(&bus->gpio_lock); -+#endif - - /* Powerup the bus */ - err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); diff --git a/target/linux/brcm47xx/patches-2.6.23/622-ssb-cardbus-fixes.patch b/target/linux/brcm47xx/patches-2.6.23/622-ssb-cardbus-fixes.patch deleted file mode 100644 index 9f93572a95..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/622-ssb-cardbus-fixes.patch +++ /dev/null @@ -1,108 +0,0 @@ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -11,6 +11,7 @@ - #include - #include - #include -+#include - - #include "ssb_private.h" - -@@ -27,6 +28,18 @@ - ssb_write32(pc->dev, offset, value); - } - -+static inline -+u16 pcicore_read16(struct ssb_pcicore *pc, u16 offset) -+{ -+ return ssb_read16(pc->dev, offset); -+} -+ -+static inline -+void pcicore_write16(struct ssb_pcicore *pc, u16 offset, u16 value) -+{ -+ ssb_write16(pc->dev, offset, value); -+} -+ - /************************************************** - * Code for hostmode operation. - **************************************************/ -@@ -123,8 +136,10 @@ - u32 addr = 0; - u32 tmp; - -- if (unlikely(pc->cardbusmode && dev > 1)) -+ /* We do only have one cardbus device behind the bridge. */ -+ if (pc->cardbusmode && (dev >= 1)) - goto out; -+ - if (bus == 0) { - /* Type 0 transaction */ - if (unlikely(dev >= SSB_PCI_SLOT_MAX)) -@@ -324,7 +339,16 @@ - pcicore_write32(pc, SSB_PCICORE_ARBCTL, val); - udelay(1); /* Assertion time demanded by the PCI standard */ - -- /*TODO cardbus mode */ -+ if (pc->dev->bus->has_cardbus_slot) { -+ ssb_dprintk(KERN_INFO PFX "CardBus slot detected\n"); -+ pc->cardbusmode = 1; -+ /* GPIO 1 resets the bridge */ -+ ssb_gpio_out(pc->dev->bus, 1, 1); -+ ssb_gpio_outen(pc->dev->bus, 1, 1); -+ pcicore_write16(pc, SSB_PCICORE_SPROM(0), -+ pcicore_read16(pc, SSB_PCICORE_SPROM(0)) -+ | 0x0400); -+ } - - /* 64MB I/O window */ - pcicore_write32(pc, SSB_PCICORE_SBTOPCI0, ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -559,6 +559,7 @@ - goto out; - memcpy(&bus->boardinfo, &iv.boardinfo, sizeof(iv.boardinfo)); - memcpy(&bus->sprom, &iv.sprom, sizeof(iv.sprom)); -+ bus->has_cardbus_slot = iv.has_cardbus_slot; - out: - return err; - } ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -282,6 +282,8 @@ - struct ssb_boardinfo boardinfo; - /* Contents of the SPROM. */ - struct ssb_sprom sprom; -+ /* If the board has a cardbus slot, this is set to true. */ -+ bool has_cardbus_slot; - - #ifdef CONFIG_SSB_EMBEDDED - /* Lock for GPIO register access. */ -@@ -299,8 +301,13 @@ - - /* The initialization-invariants. */ - struct ssb_init_invariants { -+ /* Versioning information about the PCB. */ - struct ssb_boardinfo boardinfo; -+ /* The SPROM information. That's either stored in an -+ * EEPROM or NVRAM on the board. */ - struct ssb_sprom sprom; -+ /* If the board has a cardbus slot, this is set to true. */ -+ bool has_cardbus_slot; - }; - /* Type of function to fetch the invariants. */ - typedef int (*ssb_invariants_func_t)(struct ssb_bus *bus, ---- a/include/linux/ssb/ssb_driver_pci.h -+++ b/include/linux/ssb/ssb_driver_pci.h -@@ -51,6 +51,11 @@ - #define SSB_PCICORE_SBTOPCI1_MASK 0xFC000000 - #define SSB_PCICORE_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ - #define SSB_PCICORE_SBTOPCI2_MASK 0xC0000000 -+#define SSB_PCICORE_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ -+#define SSB_PCICORE_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ -+#define SSB_PCICORE_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ -+#define SSB_PCICORE_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ -+#define SSB_PCICORE_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ - - /* SBtoPCIx */ - #define SSB_PCICORE_SBTOPCI_MEM 0x00000000 diff --git a/target/linux/brcm47xx/patches-2.6.23/680-ssb-support-8bit-writes.patch b/target/linux/brcm47xx/patches-2.6.23/680-ssb-support-8bit-writes.patch deleted file mode 100644 index cd60df8bf6..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/680-ssb-support-8bit-writes.patch +++ /dev/null @@ -1,189 +0,0 @@ -Add support for 8bit reads/writes to SSB. ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -507,6 +507,14 @@ - return err; - } - -+static u8 ssb_ssb_read8(struct ssb_device *dev, u16 offset) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ offset += dev->core_index * SSB_CORE_SIZE; -+ return readb(bus->mmio + offset); -+} -+ - static u16 ssb_ssb_read16(struct ssb_device *dev, u16 offset) - { - struct ssb_bus *bus = dev->bus; -@@ -523,6 +531,14 @@ - return readl(bus->mmio + offset); - } - -+static void ssb_ssb_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ offset += dev->core_index * SSB_CORE_SIZE; -+ writeb(value, bus->mmio + offset); -+} -+ - static void ssb_ssb_write16(struct ssb_device *dev, u16 offset, u16 value) - { - struct ssb_bus *bus = dev->bus; -@@ -541,8 +557,10 @@ - - /* Ops for the plain SSB bus without a host-device (no PCI or PCMCIA). */ - static const struct ssb_bus_ops ssb_ssb_ops = { -+ .read8 = ssb_ssb_read8, - .read16 = ssb_ssb_read16, - .read32 = ssb_ssb_read32, -+ .write8 = ssb_ssb_write8, - .write16 = ssb_ssb_write16, - .write32 = ssb_ssb_write32, - }; ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -572,6 +572,19 @@ - } - #endif /* DEBUG */ - -+static u8 ssb_pci_read8(struct ssb_device *dev, u16 offset) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ if (unlikely(ssb_pci_assert_buspower(bus))) -+ return 0xFF; -+ if (unlikely(bus->mapped_device != dev)) { -+ if (unlikely(ssb_pci_switch_core(bus, dev))) -+ return 0xFF; -+ } -+ return ioread8(bus->mmio + offset); -+} -+ - static u16 ssb_pci_read16(struct ssb_device *dev, u16 offset) - { - struct ssb_bus *bus = dev->bus; -@@ -598,6 +611,19 @@ - return ioread32(bus->mmio + offset); - } - -+static void ssb_pci_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ struct ssb_bus *bus = dev->bus; -+ -+ if (unlikely(ssb_pci_assert_buspower(bus))) -+ return; -+ if (unlikely(bus->mapped_device != dev)) { -+ if (unlikely(ssb_pci_switch_core(bus, dev))) -+ return; -+ } -+ iowrite8(value, bus->mmio + offset); -+} -+ - static void ssb_pci_write16(struct ssb_device *dev, u16 offset, u16 value) - { - struct ssb_bus *bus = dev->bus; -@@ -626,8 +652,10 @@ - - /* Not "static", as it's used in main.c */ - const struct ssb_bus_ops ssb_pci_ops = { -+ .read8 = ssb_pci_read8, - .read16 = ssb_pci_read16, - .read32 = ssb_pci_read32, -+ .write8 = ssb_pci_write8, - .write16 = ssb_pci_write16, - .write32 = ssb_pci_write32, - }; ---- a/drivers/ssb/pcmcia.c -+++ b/drivers/ssb/pcmcia.c -@@ -172,6 +172,22 @@ - return 0; - } - -+static u8 ssb_pcmcia_read8(struct ssb_device *dev, u16 offset) -+{ -+ struct ssb_bus *bus = dev->bus; -+ unsigned long flags; -+ int err; -+ u8 value = 0xFF; -+ -+ spin_lock_irqsave(&bus->bar_lock, flags); -+ err = select_core_and_segment(dev, &offset); -+ if (likely(!err)) -+ value = readb(bus->mmio + offset); -+ spin_unlock_irqrestore(&bus->bar_lock, flags); -+ -+ return value; -+} -+ - static u16 ssb_pcmcia_read16(struct ssb_device *dev, u16 offset) - { - struct ssb_bus *bus = dev->bus; -@@ -206,6 +222,20 @@ - return (lo | (hi << 16)); - } - -+static void ssb_pcmcia_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ struct ssb_bus *bus = dev->bus; -+ unsigned long flags; -+ int err; -+ -+ spin_lock_irqsave(&bus->bar_lock, flags); -+ err = select_core_and_segment(dev, &offset); -+ if (likely(!err)) -+ writeb(value, bus->mmio + offset); -+ mmiowb(); -+ spin_unlock_irqrestore(&bus->bar_lock, flags); -+} -+ - static void ssb_pcmcia_write16(struct ssb_device *dev, u16 offset, u16 value) - { - struct ssb_bus *bus = dev->bus; -@@ -238,8 +268,10 @@ - - /* Not "static", as it's used in main.c */ - const struct ssb_bus_ops ssb_pcmcia_ops = { -+ .read8 = ssb_pcmcia_read8, - .read16 = ssb_pcmcia_read16, - .read32 = ssb_pcmcia_read32, -+ .write8 = ssb_pcmcia_write8, - .write16 = ssb_pcmcia_write16, - .write32 = ssb_pcmcia_write32, - }; ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -72,8 +72,10 @@ - /* Lowlevel read/write operations on the device MMIO. - * Internal, don't use that outside of ssb. */ - struct ssb_bus_ops { -+ u8 (*read8)(struct ssb_device *dev, u16 offset); - u16 (*read16)(struct ssb_device *dev, u16 offset); - u32 (*read32)(struct ssb_device *dev, u16 offset); -+ void (*write8)(struct ssb_device *dev, u16 offset, u8 value); - void (*write16)(struct ssb_device *dev, u16 offset, u16 value); - void (*write32)(struct ssb_device *dev, u16 offset, u32 value); - }; -@@ -344,6 +346,10 @@ - - - /* Device MMIO register read/write functions. */ -+static inline u8 ssb_read8(struct ssb_device *dev, u16 offset) -+{ -+ return dev->ops->read8(dev, offset); -+} - static inline u16 ssb_read16(struct ssb_device *dev, u16 offset) - { - return dev->ops->read16(dev, offset); -@@ -352,6 +358,10 @@ - { - return dev->ops->read32(dev, offset); - } -+static inline void ssb_write8(struct ssb_device *dev, u16 offset, u8 value) -+{ -+ dev->ops->write8(dev, offset, value); -+} - static inline void ssb_write16(struct ssb_device *dev, u16 offset, u16 value) - { - dev->ops->write16(dev, offset, value); diff --git a/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch b/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch deleted file mode 100644 index b6b5c2619a..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/690-mips-allow-pciregister-after-boot.patch +++ /dev/null @@ -1,159 +0,0 @@ -Allow registering PCI devices after early boot. - -This is an ugly hack and needs to be rewritten before going upstream. ---- a/arch/mips/pci/pci.c -+++ b/arch/mips/pci/pci.c -@@ -21,6 +21,17 @@ - */ - int pci_probe_only; - -+/* -+ * Indicate whether PCI-bios init was already done. -+ */ -+static int pcibios_init_done; -+ -+/* -+ * The currently used busnumber. -+ */ -+static int next_busno; -+static int need_domain_info; -+ - #define PCI_ASSIGN_ALL_BUSSES 1 - - unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES; -@@ -75,8 +86,32 @@ - res->start = start; - } - --void __devinit register_pci_controller(struct pci_controller *hose) -+/* Most MIPS systems have straight-forward swizzling needs. */ -+ -+static inline u8 bridge_swizzle(u8 pin, u8 slot) -+{ -+ return (((pin - 1) + slot) % 4) + 1; -+} -+ -+static u8 common_swizzle(struct pci_dev *dev, u8 *pinp) - { -+ u8 pin = *pinp; -+ -+ while (dev->bus->parent) { -+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); -+ /* Move up the chain of bridges. */ -+ dev = dev->bus->self; -+ } -+ *pinp = pin; -+ -+ /* The slot is the slot of the last bridge. */ -+ return PCI_SLOT(dev->devfn); -+} -+ -+void register_pci_controller(struct pci_controller *hose) -+{ -+ struct pci_bus *bus; -+ - if (request_resource(&iomem_resource, hose->mem_resource) < 0) - goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) { -@@ -84,9 +119,6 @@ - goto out; - } - -- *hose_tail = hose; -- hose_tail = &hose->next; -- - /* - * Do not panic here but later - this might hapen before console init. - */ -@@ -94,41 +126,47 @@ - printk(KERN_WARNING - "registering PCI controller with io_map_base unset\n"); - } -- return; - --out: -- printk(KERN_WARNING -- "Skipping PCI bus scan due to resource conflict\n"); --} -+ if (pcibios_init_done) { -+ //TODO - --/* Most MIPS systems have straight-forward swizzling needs. */ -+ printk(KERN_INFO "Registering a PCI bus after boot\n"); - --static inline u8 bridge_swizzle(u8 pin, u8 slot) --{ -- return (((pin - 1) + slot) % 4) + 1; --} -+ if (!hose->iommu) -+ PCI_DMA_BUS_IS_PHYS = 1; - --static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp) --{ -- u8 pin = *pinp; -+ bus = pci_scan_bus(next_busno, hose->pci_ops, hose); -+ hose->bus = bus; -+ need_domain_info = need_domain_info || hose->index; -+ hose->need_domain_info = need_domain_info; -+ if (bus) { -+ next_busno = bus->subordinate + 1; -+ /* Don't allow 8-bit bus number overflow inside the hose - -+ reserve some space for bridges. */ -+ if (next_busno > 224) { -+ next_busno = 0; -+ need_domain_info = 1; -+ } -+ } -+ if (!pci_probe_only) -+ pci_assign_unassigned_resources(); -+ pci_fixup_irqs(common_swizzle, pcibios_map_irq); -+ } else { -+ *hose_tail = hose; -+ hose_tail = &hose->next; -+ } - -- while (dev->bus->parent) { -- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn)); -- /* Move up the chain of bridges. */ -- dev = dev->bus->self; -- } -- *pinp = pin; -+ return; - -- /* The slot is the slot of the last bridge. */ -- return PCI_SLOT(dev->devfn); -+out: -+ printk(KERN_WARNING -+ "Skipping PCI bus scan due to resource conflict\n"); - } - - static int __init pcibios_init(void) - { - struct pci_controller *hose; - struct pci_bus *bus; -- int next_busno; -- int need_domain_info = 0; - - /* Scan all of the recorded PCI controllers. */ - for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { -@@ -157,6 +195,7 @@ - if (!pci_probe_only) - pci_assign_unassigned_resources(); - pci_fixup_irqs(common_swizzle, pcibios_map_irq); -+ pcibios_init_done = 1; - - return 0; - } ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -1185,9 +1185,7 @@ - /* ssb must be initialized after PCI but before the ssb drivers. - * That means we must use some initcall between subsys_initcall - * and device_initcall. */ --//FIXME on embedded we need to be early to make sure we can register --// a new PCI bus, if needed. --subsys_initcall(ssb_modinit); -+fs_initcall(ssb_modinit); - - static void __exit ssb_modexit(void) - { diff --git a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch b/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch deleted file mode 100644 index 9e308133cb..0000000000 --- a/target/linux/brcm47xx/patches-2.6.23/700-ssb-gigabit-ethernet-driver.patch +++ /dev/null @@ -1,1226 +0,0 @@ ---- a/drivers/ssb/Kconfig -+++ b/drivers/ssb/Kconfig -@@ -120,4 +120,13 @@ - - If unsure, say N - -+config SSB_DRIVER_GIGE -+ bool "SSB Broadcom Gigabit Ethernet driver" -+ depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS -+ help -+ Driver for the Sonics Silicon Backplane attached -+ Broadcom Gigabit Ethernet. -+ -+ If unsure, say N -+ - endmenu ---- a/drivers/ssb/Makefile -+++ b/drivers/ssb/Makefile -@@ -11,6 +11,7 @@ - ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o - ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o - ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o -+ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o - - # b43 pci-ssb-bridge driver - # Not strictly a part of SSB, but kept here for convenience ---- /dev/null -+++ b/drivers/ssb/driver_gige.c -@@ -0,0 +1,294 @@ -+/* -+ * Sonics Silicon Backplane -+ * Broadcom Gigabit Ethernet core driver -+ * -+ * Copyright 2008, Broadcom Corporation -+ * Copyright 2008, Michael Buesch -+ * -+ * Licensed under the GNU/GPL. See COPYING for details. -+ */ -+ -+#include -+#include -+#include -+#include -+ -+ -+/* -+MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver"); -+MODULE_AUTHOR("Michael Buesch"); -+MODULE_LICENSE("GPL"); -+*/ -+ -+static const struct ssb_device_id ssb_gige_tbl[] = { -+ SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV), -+ SSB_DEVTABLE_END -+}; -+/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */ -+ -+ -+static inline u8 gige_read8(struct ssb_gige *dev, u16 offset) -+{ -+ return ssb_read8(dev->dev, offset); -+} -+ -+static inline u16 gige_read16(struct ssb_gige *dev, u16 offset) -+{ -+ return ssb_read16(dev->dev, offset); -+} -+ -+static inline u32 gige_read32(struct ssb_gige *dev, u16 offset) -+{ -+ return ssb_read32(dev->dev, offset); -+} -+ -+static inline void gige_write8(struct ssb_gige *dev, -+ u16 offset, u8 value) -+{ -+ ssb_write8(dev->dev, offset, value); -+} -+ -+static inline void gige_write16(struct ssb_gige *dev, -+ u16 offset, u16 value) -+{ -+ ssb_write16(dev->dev, offset, value); -+} -+ -+static inline void gige_write32(struct ssb_gige *dev, -+ u16 offset, u32 value) -+{ -+ ssb_write32(dev->dev, offset, value); -+} -+ -+static inline -+u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset) -+{ -+ BUG_ON(offset >= 256); -+ return gige_read8(dev, SSB_GIGE_PCICFG + offset); -+} -+ -+static inline -+u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset) -+{ -+ BUG_ON(offset >= 256); -+ return gige_read16(dev, SSB_GIGE_PCICFG + offset); -+} -+ -+static inline -+u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset) -+{ -+ BUG_ON(offset >= 256); -+ return gige_read32(dev, SSB_GIGE_PCICFG + offset); -+} -+ -+static inline -+void gige_pcicfg_write8(struct ssb_gige *dev, -+ unsigned int offset, u8 value) -+{ -+ BUG_ON(offset >= 256); -+ gige_write8(dev, SSB_GIGE_PCICFG + offset, value); -+} -+ -+static inline -+void gige_pcicfg_write16(struct ssb_gige *dev, -+ unsigned int offset, u16 value) -+{ -+ BUG_ON(offset >= 256); -+ gige_write16(dev, SSB_GIGE_PCICFG + offset, value); -+} -+ -+static inline -+void gige_pcicfg_write32(struct ssb_gige *dev, -+ unsigned int offset, u32 value) -+{ -+ BUG_ON(offset >= 256); -+ gige_write32(dev, SSB_GIGE_PCICFG + offset, value); -+} -+ -+static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 *val) -+{ -+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); -+ unsigned long flags; -+ -+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ if (reg >= 256) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ spin_lock_irqsave(&dev->lock, flags); -+ switch (size) { -+ case 1: -+ *val = gige_pcicfg_read8(dev, reg); -+ break; -+ case 2: -+ *val = gige_pcicfg_read16(dev, reg); -+ break; -+ case 4: -+ *val = gige_pcicfg_read32(dev, reg); -+ break; -+ default: -+ WARN_ON(1); -+ } -+ spin_unlock_irqrestore(&dev->lock, flags); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, -+ int reg, int size, u32 val) -+{ -+ struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); -+ unsigned long flags; -+ -+ if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ if (reg >= 256) -+ return PCIBIOS_DEVICE_NOT_FOUND; -+ -+ spin_lock_irqsave(&dev->lock, flags); -+ switch (size) { -+ case 1: -+ gige_pcicfg_write8(dev, reg, val); -+ break; -+ case 2: -+ gige_pcicfg_write16(dev, reg, val); -+ break; -+ case 4: -+ gige_pcicfg_write32(dev, reg, val); -+ break; -+ default: -+ WARN_ON(1); -+ } -+ spin_unlock_irqrestore(&dev->lock, flags); -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id) -+{ -+ struct ssb_gige *dev; -+ u32 base, tmslow, tmshigh; -+ -+ dev = kzalloc(sizeof(*dev), GFP_KERNEL); -+ if (!dev) -+ return -ENOMEM; -+ dev->dev = sdev; -+ -+ spin_lock_init(&dev->lock); -+ dev->pci_controller.pci_ops = &dev->pci_ops; -+ dev->pci_controller.io_resource = &dev->io_resource; -+ dev->pci_controller.mem_resource = &dev->mem_resource; -+ dev->pci_controller.io_map_base = 0x800; -+ dev->pci_ops.read = ssb_gige_pci_read_config; -+ dev->pci_ops.write = ssb_gige_pci_write_config; -+ -+ dev->io_resource.name = SSB_GIGE_IO_RES_NAME; -+ dev->io_resource.start = 0x800; -+ dev->io_resource.end = 0x8FF; -+ dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; -+ -+ if (!ssb_device_is_enabled(sdev)) -+ ssb_device_enable(sdev, 0); -+ -+ /* Setup BAR0. This is a 64k MMIO region. */ -+ base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1)); -+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base); -+ gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0); -+ -+ dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME; -+ dev->mem_resource.start = base; -+ dev->mem_resource.end = base + 0x10000 - 1; -+ dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ -+ /* Enable the memory region. */ -+ gige_pcicfg_write16(dev, PCI_COMMAND, -+ gige_pcicfg_read16(dev, PCI_COMMAND) -+ | PCI_COMMAND_MEMORY); -+ -+ /* Write flushing is controlled by the Flush Status Control register. -+ * We want to flush every register write with a timeout and we want -+ * to disable the IRQ mask while flushing to avoid concurrency. -+ * Note that automatic write flushing does _not_ work from -+ * an IRQ handler. The driver must flush manually by reading a register. -+ */ -+ gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068); -+ -+ /* Check if we have an RGMII or GMII PHY-bus. -+ * On RGMII do not bypass the DLLs */ -+ tmslow = ssb_read32(sdev, SSB_TMSLOW); -+ tmshigh = ssb_read32(sdev, SSB_TMSHIGH); -+ if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) { -+ tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS; -+ tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS; -+ dev->has_rgmii = 1; -+ } else { -+ tmslow |= SSB_GIGE_TMSLOW_TXBYPASS; -+ tmslow |= SSB_GIGE_TMSLOW_RXBYPASS; -+ dev->has_rgmii = 0; -+ } -+ tmslow |= SSB_GIGE_TMSLOW_DLLEN; -+ ssb_write32(sdev, SSB_TMSLOW, tmslow); -+ -+ ssb_set_drvdata(sdev, dev); -+ register_pci_controller(&dev->pci_controller); -+ -+ return 0; -+} -+ -+bool pdev_is_ssb_gige_core(struct pci_dev *pdev) -+{ -+ if (!pdev->resource[0].name) -+ return 0; -+ return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0); -+} -+EXPORT_SYMBOL(pdev_is_ssb_gige_core); -+ -+int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, -+ struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = ssb_get_drvdata(sdev); -+ struct resource *res; -+ -+ if (pdev->bus->ops != &dev->pci_ops) { -+ /* The PCI device is not on this SSB GigE bridge device. */ -+ return -ENODEV; -+ } -+ -+ /* Fixup the PCI resources. */ -+ res = &(pdev->resource[0]); -+ res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; -+ res->name = dev->mem_resource.name; -+ res->start = dev->mem_resource.start; -+ res->end = dev->mem_resource.end; -+ -+ /* Fixup interrupt lines. */ -+ pdev->irq = ssb_mips_irq(sdev) + 2; -+ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq); -+ -+ return 0; -+} -+ -+int ssb_gige_map_irq(struct ssb_device *sdev, -+ const struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = ssb_get_drvdata(sdev); -+ -+ if (pdev->bus->ops != &dev->pci_ops) { -+ /* The PCI device is not on this SSB GigE bridge device. */ -+ return -ENODEV; -+ } -+ -+ return ssb_mips_irq(sdev) + 2; -+} -+ -+static struct ssb_driver ssb_gige_driver = { -+ .name = "BCM-GigE", -+ .id_table = ssb_gige_tbl, -+ .probe = ssb_gige_probe, -+}; -+ -+int ssb_gige_init(void) -+{ -+ return ssb_driver_register(&ssb_gige_driver); -+} ---- /dev/null -+++ b/include/linux/ssb/ssb_driver_gige.h -@@ -0,0 +1,174 @@ -+#ifndef LINUX_SSB_DRIVER_GIGE_H_ -+#define LINUX_SSB_DRIVER_GIGE_H_ -+ -+#include -+#include -+#include -+ -+ -+#ifdef CONFIG_SSB_DRIVER_GIGE -+ -+ -+#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */ -+#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */ -+#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */ -+#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */ -+#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */ -+#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */ -+#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */ -+#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */ -+#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */ -+ -+/* TM Status High flags */ -+#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */ -+/* TM Status Low flags */ -+#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */ -+#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */ -+#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */ -+ -+/* Boardflags (low) */ -+#define SSB_GIGE_BFL_ROBOSWITCH 0x0010 -+ -+ -+#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory" -+#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O" -+ -+struct ssb_gige { -+ struct ssb_device *dev; -+ -+ spinlock_t lock; -+ -+ /* True, if the device has an RGMII bus. -+ * False, if the device has a GMII bus. */ -+ bool has_rgmii; -+ -+ /* The PCI controller device. */ -+ struct pci_controller pci_controller; -+ struct pci_ops pci_ops; -+ struct resource mem_resource; -+ struct resource io_resource; -+}; -+ -+/* Check whether a PCI device is a SSB Gigabit Ethernet core. */ -+extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev); -+ -+/* Convert a pci_dev pointer to a ssb_gige pointer. */ -+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) -+{ -+ if (!pdev_is_ssb_gige_core(pdev)) -+ return NULL; -+ return container_of(pdev->bus->ops, struct ssb_gige, pci_ops); -+} -+ -+/* Returns whether the PHY is connected by an RGMII bus. */ -+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ return (dev ? dev->has_rgmii : 0); -+} -+ -+/* Returns whether we have a Roboswitch. */ -+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (dev) -+ return !!(dev->dev->bus->sprom.boardflags_lo & -+ SSB_GIGE_BFL_ROBOSWITCH); -+ return 0; -+} -+ -+/* Returns whether we can only do one DMA at once. */ -+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (dev) -+ return ((dev->dev->bus->chip_id == 0x4785) && -+ (dev->dev->bus->chip_rev < 2)); -+ return 0; -+} -+ -+/* Returns whether we must flush posted writes. */ -+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) -+{ -+ struct ssb_gige *dev = pdev_to_ssb_gige(pdev); -+ if (dev) -+ return (dev->dev->bus->chip_id == 0x4785); -+ return 0; -+} -+ -+extern char * nvram_get(const char *name); -+/* Get the device MAC address */ -+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) -+{ -+#ifdef CONFIG_BCM947XX -+ char *res = nvram_get("et0macaddr"); -+ if (res) -+ memcpy(macaddr, res, 6); -+#endif -+} -+ -+extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, -+ struct pci_dev *pdev); -+extern int ssb_gige_map_irq(struct ssb_device *sdev, -+ const struct pci_dev *pdev); -+ -+/* The GigE driver is not a standalone module, because we don't have support -+ * for unregistering the driver. So we could not unload the module anyway. */ -+extern int ssb_gige_init(void); -+static inline void ssb_gige_exit(void) -+{ -+ /* Currently we can not unregister the GigE driver, -+ * because we can not unregister the PCI bridge. */ -+ BUG(); -+} -+ -+ -+#else /* CONFIG_SSB_DRIVER_GIGE */ -+/* Gigabit Ethernet driver disabled */ -+ -+ -+static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, -+ struct pci_dev *pdev) -+{ -+ return -ENOSYS; -+} -+static inline int ssb_gige_map_irq(struct ssb_device *sdev, -+ const struct pci_dev *pdev) -+{ -+ return -ENOSYS; -+} -+static inline int ssb_gige_init(void) -+{ -+ return 0; -+} -+static inline void ssb_gige_exit(void) -+{ -+} -+ -+static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev) -+{ -+ return NULL; -+} -+static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev) -+{ -+ return 0; -+} -+static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev) -+{ -+ return 0; -+} -+ -+#endif /* CONFIG_SSB_DRIVER_GIGE */ -+#endif /* LINUX_SSB_DRIVER_GIGE_H_ */ ---- a/drivers/ssb/driver_pcicore.c -+++ b/drivers/ssb/driver_pcicore.c -@@ -60,74 +60,6 @@ - /* Core to access the external PCI config space. Can only have one. */ - static struct ssb_pcicore *extpci_core; - --static u32 ssb_pcicore_pcibus_iobase = 0x100; --static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -- --int pcibios_plat_dev_init(struct pci_dev *d) --{ -- struct resource *res; -- int pos, size; -- u32 *base; -- -- ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", -- pci_name(d)); -- -- /* Fix up resource bases */ -- for (pos = 0; pos < 6; pos++) { -- res = &d->resource[pos]; -- if (res->flags & IORESOURCE_IO) -- base = &ssb_pcicore_pcibus_iobase; -- else -- base = &ssb_pcicore_pcibus_membase; -- res->flags |= IORESOURCE_PCI_FIXED; -- if (res->end) { -- size = res->end - res->start + 1; -- if (*base & (size - 1)) -- *base = (*base + size) & ~(size - 1); -- res->start = *base; -- res->end = res->start + size - 1; -- *base += size; -- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -- } -- /* Fix up PCI bridge BAR0 only */ -- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -- break; -- } -- /* Fix up interrupt lines */ -- d->irq = ssb_mips_irq(extpci_core->dev) + 2; -- pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -- -- return 0; --} -- --static void __init ssb_fixup_pcibridge(struct pci_dev *dev) --{ -- u8 lat; -- -- if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) -- return; -- -- ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); -- -- /* Enable PCI bridge bus mastering and memory space */ -- pci_set_master(dev); -- pcibios_enable_device(dev, ~0); -- -- /* Enable PCI bridge BAR1 prefetch and burst */ -- pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); -- -- /* Make sure our latency is high enough to handle the devices behind us */ -- lat = 168; -- ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", -- pci_name(dev), lat); -- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); --} --DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); -- --int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) --{ -- return ssb_mips_irq(extpci_core->dev) + 2; --} - - static u32 get_cfgspace_addr(struct ssb_pcicore *pc, - unsigned int bus, unsigned int dev, -@@ -317,6 +249,92 @@ - .mem_offset = 0x24000000, - }; - -+static u32 ssb_pcicore_pcibus_iobase = 0x100; -+static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; -+ -+/* This function is called when doing a pci_enable_device(). -+ * We must first check if the device is a device on the PCI-core bridge. */ -+int ssb_pcicore_plat_dev_init(struct pci_dev *d) -+{ -+ struct resource *res; -+ int pos, size; -+ u32 *base; -+ -+ if (d->bus->ops != &ssb_pcicore_pciops) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ -+ ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", -+ pci_name(d)); -+ -+ /* Fix up resource bases */ -+ for (pos = 0; pos < 6; pos++) { -+ res = &d->resource[pos]; -+ if (res->flags & IORESOURCE_IO) -+ base = &ssb_pcicore_pcibus_iobase; -+ else -+ base = &ssb_pcicore_pcibus_membase; -+ res->flags |= IORESOURCE_PCI_FIXED; -+ if (res->end) { -+ size = res->end - res->start + 1; -+ if (*base & (size - 1)) -+ *base = (*base + size) & ~(size - 1); -+ res->start = *base; -+ res->end = res->start + size - 1; -+ *base += size; -+ pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); -+ } -+ /* Fix up PCI bridge BAR0 only */ -+ if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) -+ break; -+ } -+ /* Fix up interrupt lines */ -+ d->irq = ssb_mips_irq(extpci_core->dev) + 2; -+ pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); -+ -+ return 0; -+} -+ -+/* Early PCI fixup for a device on the PCI-core bridge. */ -+static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev) -+{ -+ u8 lat; -+ -+ if (dev->bus->ops != &ssb_pcicore_pciops) { -+ /* This is not a device on the PCI-core bridge. */ -+ return; -+ } -+ if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) -+ return; -+ -+ ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); -+ -+ /* Enable PCI bridge bus mastering and memory space */ -+ pci_set_master(dev); -+ pcibios_enable_device(dev, ~0); -+ -+ /* Enable PCI bridge BAR1 prefetch and burst */ -+ pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); -+ -+ /* Make sure our latency is high enough to handle the devices behind us */ -+ lat = 168; -+ ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", -+ pci_name(dev), lat); -+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -+} -+DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); -+ -+/* PCI device IRQ mapping. */ -+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ if (dev->bus->ops != &ssb_pcicore_pciops) { -+ /* This is not a device on the PCI-core bridge. */ -+ return -ENODEV; -+ } -+ return ssb_mips_irq(extpci_core->dev) + 2; -+} -+ - static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) - { - u32 val; ---- a/drivers/ssb/embedded.c -+++ b/drivers/ssb/embedded.c -@@ -10,6 +10,9 @@ - - #include - #include -+#include -+#include -+#include - - #include "ssb_private.h" - -@@ -130,3 +133,90 @@ - return res; - } - EXPORT_SYMBOL(ssb_gpio_polarity); -+ -+#ifdef CONFIG_SSB_DRIVER_GIGE -+static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data) -+{ -+ struct pci_dev *pdev = (struct pci_dev *)data; -+ struct ssb_device *dev; -+ unsigned int i; -+ int res; -+ -+ for (i = 0; i < bus->nr_devices; i++) { -+ dev = &(bus->devices[i]); -+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT) -+ continue; -+ if (!dev->dev || -+ !dev->dev->driver || -+ !device_is_registered(dev->dev)) -+ continue; -+ res = ssb_gige_pcibios_plat_dev_init(dev, pdev); -+ if (res >= 0) -+ return res; -+ } -+ -+ return -ENODEV; -+} -+#endif /* CONFIG_SSB_DRIVER_GIGE */ -+ -+int ssb_pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ int err; -+ -+ err = ssb_pcicore_plat_dev_init(dev); -+ if (!err) -+ return 0; -+#ifdef CONFIG_SSB_DRIVER_GIGE -+ err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback); -+ if (err >= 0) -+ return err; -+#endif -+ /* This is not a PCI device on any SSB device. */ -+ -+ return -ENODEV; -+} -+ -+#ifdef CONFIG_SSB_DRIVER_GIGE -+static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data) -+{ -+ const struct pci_dev *pdev = (const struct pci_dev *)data; -+ struct ssb_device *dev; -+ unsigned int i; -+ int res; -+ -+ for (i = 0; i < bus->nr_devices; i++) { -+ dev = &(bus->devices[i]); -+ if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT) -+ continue; -+ if (!dev->dev || -+ !dev->dev->driver || -+ !device_is_registered(dev->dev)) -+ continue; -+ res = ssb_gige_map_irq(dev, pdev); -+ if (res >= 0) -+ return res; -+ } -+ -+ return -ENODEV; -+} -+#endif /* CONFIG_SSB_DRIVER_GIGE */ -+ -+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int res; -+ -+ /* Check if this PCI device is a device on a SSB bus or device -+ * and return the IRQ number for it. */ -+ -+ res = ssb_pcicore_pcibios_map_irq(dev, slot, pin); -+ if (res >= 0) -+ return res; -+#ifdef CONFIG_SSB_DRIVER_GIGE -+ res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback); -+ if (res >= 0) -+ return res; -+#endif -+ /* This is not a PCI device on any SSB device. */ -+ -+ return -ENODEV; -+} ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -422,5 +422,12 @@ - extern u32 ssb_admatch_base(u32 adm); - extern u32 ssb_admatch_size(u32 adm); - -+/* PCI device mapping and fixup routines. -+ * Called from the architecture pcibios init code. -+ * These are only available on SSB_EMBEDDED configurations. */ -+#ifdef CONFIG_SSB_EMBEDDED -+int ssb_pcibios_plat_dev_init(struct pci_dev *dev); -+int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -+#endif /* CONFIG_SSB_EMBEDDED */ - - #endif /* LINUX_SSB_H_ */ ---- a/include/linux/ssb/ssb_driver_pci.h -+++ b/include/linux/ssb/ssb_driver_pci.h -@@ -1,6 +1,11 @@ - #ifndef LINUX_SSB_PCICORE_H_ - #define LINUX_SSB_PCICORE_H_ - -+#include -+ -+struct pci_dev; -+ -+ - #ifdef CONFIG_SSB_DRIVER_PCICORE - - /* PCI core registers. */ -@@ -88,6 +93,9 @@ - extern int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, - struct ssb_device *dev); - -+int ssb_pcicore_plat_dev_init(struct pci_dev *d); -+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -+ - - #else /* CONFIG_SSB_DRIVER_PCICORE */ - -@@ -107,5 +115,16 @@ - return 0; - } - -+static inline -+int ssb_pcicore_plat_dev_init(struct pci_dev *d) -+{ -+ return -ENODEV; -+} -+static inline -+int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ return -ENODEV; -+} -+ - #endif /* CONFIG_SSB_DRIVER_PCICORE */ - #endif /* LINUX_SSB_PCICORE_H_ */ ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -14,6 +14,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -68,6 +69,25 @@ - } - #endif /* CONFIG_SSB_PCIHOST */ - -+int ssb_for_each_bus_call(unsigned long data, -+ int (*func)(struct ssb_bus *bus, unsigned long data)) -+{ -+ struct ssb_bus *bus; -+ int res; -+ -+ ssb_buses_lock(); -+ list_for_each_entry(bus, &buses, list) { -+ res = func(bus, data); -+ if (res >= 0) { -+ ssb_buses_unlock(); -+ return res; -+ } -+ } -+ ssb_buses_unlock(); -+ -+ return -ENODEV; -+} -+ - static struct ssb_device *ssb_device_get(struct ssb_device *dev) - { - if (dev) -@@ -1175,7 +1195,14 @@ - err = b43_pci_ssb_bridge_init(); - if (err) { - ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " -- "initialization failed"); -+ "initialization failed\n"); -+ /* don't fail SSB init because of this */ -+ err = 0; -+ } -+ err = ssb_gige_init(); -+ if (err) { -+ ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " -+ "driver initialization failed\n"); - /* don't fail SSB init because of this */ - err = 0; - } -@@ -1189,6 +1216,7 @@ - - static void __exit ssb_modexit(void) - { -+ ssb_gige_exit(); - b43_pci_ssb_bridge_exit(); - bus_unregister(&ssb_bustype); - } ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -118,6 +118,8 @@ - extern int ssb_devices_freeze(struct ssb_bus *bus); - extern int ssb_devices_thaw(struct ssb_bus *bus); - extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); -+int ssb_for_each_bus_call(unsigned long data, -+ int (*func)(struct ssb_bus *bus, unsigned long data)); - - /* b43_pci_bridge.c */ - #ifdef CONFIG_SSB_PCIHOST ---- a/drivers/net/tg3.c -+++ b/drivers/net/tg3.c -@@ -38,6 +38,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -410,8 +411,9 @@ - static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val) - { - tp->write32_mbox(tp, off, val); -- if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) && -- !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND)) -+ if ((tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) || -+ (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) && -+ !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))) - tp->read32_mbox(tp, off); - } - -@@ -623,7 +625,7 @@ - - #define PHY_BUSY_LOOPS 5000 - --static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) -+static int __tg3_readphy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 *val) - { - u32 frame_val; - unsigned int loops; -@@ -637,7 +639,7 @@ - - *val = 0x0; - -- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) & -+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & - MI_COM_PHY_ADDR_MASK); - frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & - MI_COM_REG_ADDR_MASK); -@@ -672,7 +674,12 @@ - return ret; - } - --static int tg3_writephy(struct tg3 *tp, int reg, u32 val) -+static int tg3_readphy(struct tg3 *tp, int reg, u32 *val) -+{ -+ return __tg3_readphy(tp, PHY_ADDR, reg, val); -+} -+ -+static int __tg3_writephy(struct tg3 *tp, unsigned int phy_addr, int reg, u32 val) - { - u32 frame_val; - unsigned int loops; -@@ -688,7 +695,7 @@ - udelay(80); - } - -- frame_val = ((PHY_ADDR << MI_COM_PHY_ADDR_SHIFT) & -+ frame_val = ((phy_addr << MI_COM_PHY_ADDR_SHIFT) & - MI_COM_PHY_ADDR_MASK); - frame_val |= ((reg << MI_COM_REG_ADDR_SHIFT) & - MI_COM_REG_ADDR_MASK); -@@ -721,6 +728,11 @@ - return ret; - } - -+static int tg3_writephy(struct tg3 *tp, int reg, u32 val) -+{ -+ return __tg3_writephy(tp, PHY_ADDR, reg, val); -+} -+ - static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable) - { - u32 phy; -@@ -1988,6 +2000,14 @@ - tp->link_config.active_duplex = current_duplex; - } - -+ if (tp->tg3_flags3 & TG3_FLG3_ROBOSWITCH) { -+ current_link_up = 1; -+ current_speed = SPEED_1000; //FIXME -+ current_duplex = DUPLEX_FULL; -+ tp->link_config.active_speed = current_speed; -+ tp->link_config.active_duplex = current_duplex; -+ } -+ - if (current_link_up == 1 && - (tp->link_config.active_duplex == DUPLEX_FULL) && - (tp->link_config.autoneg == AUTONEG_ENABLE)) { -@@ -4813,6 +4833,11 @@ - int i; - u32 val; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) { - /* Wait up to 20ms for init done. */ - for (i = 0; i < 200; i++) { -@@ -5040,6 +5065,14 @@ - tw32(0x5000, 0x400); - } - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* BCM4785: In order to avoid repercussions from using potentially -+ * defective internal ROM, stop the Rx RISC CPU, which is not -+ * required. */ -+ tg3_stop_fw(tp); -+ tg3_halt_cpu(tp, RX_CPU_BASE); -+ } -+ - tw32(GRC_MODE, tp->grc_mode); - - if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) { -@@ -5308,9 +5341,12 @@ - return -ENODEV; - } - -- /* Clear firmware's nvram arbitration. */ -- if (tp->tg3_flags & TG3_FLAG_NVRAM) -- tw32(NVRAM_SWARB, SWARB_REQ_CLR0); -+ if (!(tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE)) { -+ /* Clear firmware's nvram arbitration. */ -+ if (tp->tg3_flags & TG3_FLAG_NVRAM) -+ tw32(NVRAM_SWARB, SWARB_REQ_CLR0); -+ } -+ - return 0; - } - -@@ -5391,6 +5427,11 @@ - struct fw_info info; - int err, i; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - info.text_base = TG3_FW_TEXT_ADDR; - info.text_len = TG3_FW_TEXT_LEN; - info.text_data = &tg3FwText[0]; -@@ -5949,6 +5990,11 @@ - unsigned long cpu_base, cpu_scratch_base, cpu_scratch_size; - int err, i; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't use firmware. */ -+ return 0; -+ } -+ - if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) - return 0; - -@@ -6850,6 +6896,11 @@ - - spin_lock(&tp->lock); - -+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) { -+ /* BCM4785: Flush posted writes from GbE to host memory. */ -+ tr32(HOSTCC_MODE); -+ } -+ - if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { - /* All of this garbage is because when using non-tagged - * IRQ status the mailbox/status_block protocol the chip -@@ -8432,6 +8483,11 @@ - u32 *buf, csum, magic; - int i, j, err = 0, size; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* We don't have NVRAM. */ -+ return 0; -+ } -+ - if (tg3_nvram_read_swab(tp, 0, &magic) != 0) - return -EIO; - -@@ -9154,7 +9210,7 @@ - return -EAGAIN; - - spin_lock_bh(&tp->lock); -- err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); -+ err = __tg3_readphy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, &mii_regval); - spin_unlock_bh(&tp->lock); - - data->val_out = mii_regval; -@@ -9173,7 +9229,7 @@ - return -EAGAIN; - - spin_lock_bh(&tp->lock); -- err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); -+ err = __tg3_writephy(tp, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in); - spin_unlock_bh(&tp->lock); - - return err; -@@ -9571,6 +9627,12 @@ - /* Chips other than 5700/5701 use the NVRAM for fetching info. */ - static void __devinit tg3_nvram_init(struct tg3 *tp) - { -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) { -+ /* No NVRAM and EEPROM on the SSB Broadcom GigE core. */ -+ tp->tg3_flags &= ~(TG3_FLAG_NVRAM | TG3_FLAG_NVRAM_BUFFERED); -+ return; -+ } -+ - tw32_f(GRC_EEPROM_ADDR, - (EEPROM_ADDR_FSM_RESET | - (EEPROM_DEFAULT_CLOCK_PERIOD << -@@ -9706,6 +9768,9 @@ - { - int ret; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) -+ return -ENODEV; -+ - if (!(tp->tg3_flags & TG3_FLAG_NVRAM)) - return tg3_nvram_read_using_eeprom(tp, offset, val); - -@@ -9938,6 +10003,9 @@ - { - int ret; - -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) -+ return -ENODEV; -+ - if (tp->tg3_flags & TG3_FLAG_EEPROM_WRITE_PROT) { - tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl & - ~GRC_LCLCTRL_GPIO_OUTPUT1); -@@ -10804,7 +10872,6 @@ - tp->write32 = tg3_write_flush_reg32; - } - -- - if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) || - (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) { - tp->write32_tx_mbox = tg3_write32_tx_mbox; -@@ -10840,6 +10907,11 @@ - GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701))) - tp->tg3_flags |= TG3_FLAG_SRAM_USE_CONFIG; - -+ if (tp->tg3_flags3 & TG3_FLG3_FLUSH_POSTED_WRITES) { -+ tp->write32_tx_mbox = tg3_write_flush_reg32; -+ tp->write32_rx_mbox = tg3_write_flush_reg32; -+ } -+ - /* Get eeprom hw config before calling tg3_set_power_state(). - * In particular, the TG3_FLG2_IS_NIC flag must be - * determined before calling tg3_set_power_state() so that -@@ -11184,6 +11256,10 @@ - } - - if (!is_valid_ether_addr(&dev->dev_addr[0])) { -+ if (tp->tg3_flags3 & TG3_FLG3_IS_SSB_CORE) -+ ssb_gige_get_macaddr(tp->pdev, &dev->dev_addr[0]); -+ } -+ if (!is_valid_ether_addr(&dev->dev_addr[0])) { - #ifdef CONFIG_SPARC64 - if (!tg3_get_default_macaddr_sparc(tp)) - return 0; -@@ -11675,6 +11751,7 @@ - case PHY_ID_BCM5704: return "5704"; - case PHY_ID_BCM5705: return "5705"; - case PHY_ID_BCM5750: return "5750"; -+ case PHY_ID_BCM5750_2: return "5750-2"; - case PHY_ID_BCM5752: return "5752"; - case PHY_ID_BCM5714: return "5714"; - case PHY_ID_BCM5780: return "5780"; -@@ -11859,6 +11936,13 @@ - tp->msg_enable = tg3_debug; - else - tp->msg_enable = TG3_DEF_MSG_ENABLE; -+ if (pdev_is_ssb_gige_core(pdev)) { -+ tp->tg3_flags3 |= TG3_FLG3_IS_SSB_CORE; -+ if (ssb_gige_must_flush_posted_writes(pdev)) -+ tp->tg3_flags3 |= TG3_FLG3_FLUSH_POSTED_WRITES; -+ if (ssb_gige_have_roboswitch(pdev)) -+ tp->tg3_flags3 |= TG3_FLG3_ROBOSWITCH; -+ } - - /* The word/byte swap controls here control register access byte - * swapping. DMA data byte swapping is controlled in the GRC_MODE ---- a/drivers/net/tg3.h -+++ b/drivers/net/tg3.h -@@ -2279,6 +2279,10 @@ - #define TG3_FLG2_PHY_JITTER_BUG 0x20000000 - #define TG3_FLG2_NO_FWARE_REPORTED 0x40000000 - #define TG3_FLG2_PHY_ADJUST_TRIM 0x80000000 -+ u32 tg3_flags3; -+#define TG3_FLG3_IS_SSB_CORE 0x00000001 -+#define TG3_FLG3_FLUSH_POSTED_WRITES 0x00000002 -+#define TG3_FLG3_ROBOSWITCH 0x00000004 - - struct timer_list timer; - u16 timer_counter; -@@ -2333,6 +2337,7 @@ - #define PHY_ID_BCM5714 0x60008340 - #define PHY_ID_BCM5780 0x60008350 - #define PHY_ID_BCM5755 0xbc050cc0 -+#define PHY_ID_BCM5750_2 0xbc050cd0 - #define PHY_ID_BCM5787 0xbc050ce0 - #define PHY_ID_BCM5756 0xbc050ed0 - #define PHY_ID_BCM5906 0xdc00ac40 -@@ -2364,7 +2369,8 @@ - (X) == PHY_ID_BCM5752 || (X) == PHY_ID_BCM5714 || \ - (X) == PHY_ID_BCM5780 || (X) == PHY_ID_BCM5787 || \ - (X) == PHY_ID_BCM5755 || (X) == PHY_ID_BCM5756 || \ -- (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002) -+ (X) == PHY_ID_BCM5906 || (X) == PHY_ID_BCM8002 || \ -+ (X) == PHY_ID_BCM5750_2) - - struct tg3_hw_stats *hw_stats; - dma_addr_t stats_mapping; ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -212,6 +212,7 @@ - /* fallthrough */ - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: -+ case SSB_DEV_ETHERNET_GBIT: - case SSB_DEV_80211: - case SSB_DEV_USB20_HOST: - /* These devices get their own IRQ line if available, the rest goes on IRQ0 */