From: Florian Fainelli <florian@openwrt.org>
Date: Tue, 21 Jan 2014 18:50:11 +0000 (+0000)
Subject: brcm63xx: add support for BCM963269BHR board
X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;hb=6bf09e6e1d53b373fcb5367e82c8094d23aaa5c3

brcm63xx: add support for BCM963269BHR board

Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 39363
---

diff --git a/target/linux/brcm63xx/patches-3.10/557-board_bcm963269bhr.patch b/target/linux/brcm63xx/patches-3.10/557-board_bcm963269bhr.patch
new file mode 100644
index 0000000000..8fcd420ff1
--- /dev/null
+++ b/target/linux/brcm63xx/patches-3.10/557-board_bcm963269bhr.patch
@@ -0,0 +1,88 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -4221,6 +4221,75 @@ static struct board_info __initdata boar
+ #endif
+ 
+ /*
++ * known 63268/63269 boards
++ */
++#ifdef CONFIG_BCM63XX_CPU_63268
++static struct board_info __initdata board_963269bhr = {
++	.name				= "963269BHR",
++	.expected_cpu_id		= 0x63268,
++
++	.has_uart0			= 1,
++
++	.has_pci			= 1,
++
++	.has_ehci0			= 1,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "port1",
++			},
++
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "port2",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "port3",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "port4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "963629BHR:green:usb1",
++			.gpio		= 9,
++			.active_low	= 1,
++		},
++		{
++			.name		= "963629BHR:green:usb2",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 32,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++#endif
++
++/*
+  * all boards
+  */
+ static const struct board_info __initconst *bcm963xx_boards[] = {
+@@ -4303,6 +4372,9 @@ static const struct board_info __initcon
+ 	&board_96368mvwg,
+ 	&board_96368mvngr,
+ #endif
++#ifdef CONFIG_BCM63XX_CPU_63268
++	&board_963269bhr,
++#endif
+ };
+ 
+ /*
diff --git a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
index bfe7f9b90f..5d3bc21ded 100644
--- a/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
+++ b/target/linux/brcm63xx/patches-3.10/801-ssb_export_fallback_sprom.patch
@@ -8,7 +8,7 @@
  #include <linux/spi/spi.h>
  #include <linux/spi/spi_gpio.h>
  #include <linux/spi/74x164.h>
-@@ -4310,7 +4311,7 @@ static const struct board_info __initcon
+@@ -4382,7 +4383,7 @@ static const struct board_info __initcon
   * bcm4318 WLAN work
   */
  #ifdef CONFIG_SSB_PCIHOST
@@ -17,7 +17,7 @@
  	.revision		= 0x02,
  	.board_rev		= 0x17,
  	.country_code		= 0x0,
-@@ -4330,6 +4331,7 @@ static struct ssb_sprom bcm63xx_sprom =
+@@ -4402,6 +4403,7 @@ static struct ssb_sprom bcm63xx_sprom =
  	.boardflags_lo		= 0x2848,
  	.boardflags_hi		= 0x0000,
  };