From: Felix Fietkau Date: Tue, 7 Feb 2012 11:28:06 +0000 (+0000) Subject: kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required... X-Git-Url: http://git.openwrt.org/?p=openwrt%2Fsvn-archive%2Farchive.git;a=commitdiff_plain;hb=c5311c867aa315ed50647322247e8844ac6fc854 kernel: add a recent upstream commit (post-3.3) to the ssb update patch, required for the next mac80211 update SVN-Revision: 30345 --- diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch index 71f5b74a7e..b27270aba5 100644 --- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch @@ -225,7 +225,7 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct +@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -289,7 +289,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -1720,7 +1720,7 @@ static inline u8 ssb_crc8(u8 crc, u8 data) { -@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus +@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus int i; for (i = 0; i < bus->sprom_size; i++) @@ -1800,7 +1800,7 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb +@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); @@ -1809,7 +1809,17 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_ + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); /* extract the MAC address */ for (i = 0; i < 3; i++) { @@ -1825,7 +1835,7 @@ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, SSB_SPROM8_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_ +@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, SSB_SPROM8_ITSSI_A_SHIFT); @@ -1881,10 +1891,42 @@ /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ +@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -1913,7 +1955,7 @@ /* TODO - get remaining rev 8 stuff needed */ } -@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus +@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1971,7 +2013,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus +@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -2009,7 +2051,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -2039,7 +2081,7 @@ err = 0; goto out_free; } -@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -2451,7 +2493,7 @@ } bus->mmio = NULL; bus->mapped_device = NULL; -@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct +@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct SSB_BUG_ON(1); /* Can't reach this code. */ #endif break; @@ -3391,7 +3433,20 @@ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,26 +25,62 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,26 +31,64 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -3458,10 +3513,12 @@ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ ++ ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,14 +94,23 @@ struct ssb_sprom { +@@ -58,14 +102,23 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -3487,7 +3544,7 @@ }; -@@ -137,7 +182,7 @@ struct ssb_device { +@@ -137,7 +190,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -3496,7 +3553,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -195,10 +240,9 @@ struct ssb_driver { +@@ -195,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -3510,7 +3567,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -208,6 +252,7 @@ enum ssb_bustype { +@@ -208,6 +260,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -3518,7 +3575,7 @@ }; /* board_vendor */ -@@ -238,20 +283,33 @@ struct ssb_bus { +@@ -238,20 +291,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -3560,7 +3617,7 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -260,7 +318,8 @@ struct ssb_bus { +@@ -260,7 +326,8 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -3570,7 +3627,7 @@ u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +365,11 @@ struct ssb_bus { +@@ -306,6 +373,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -3582,7 +3639,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -3607,7 +3664,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -3876,7 +3933,7 @@ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,104 +267,257 @@ +@@ -264,104 +267,291 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ @@ -4117,6 +4174,39 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -4143,6 +4233,7 @@ +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x00DA +#define SSB_SPROM8_PA1HIB2 0x00DC ++ +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ diff --git a/target/linux/generic/patches-2.6.31/941-ssb_update.patch b/target/linux/generic/patches-2.6.31/941-ssb_update.patch index e86ec9ba1a..82c0ff3d96 100644 --- a/target/linux/generic/patches-2.6.31/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.31/941-ssb_update.patch @@ -225,7 +225,7 @@ * Copyright 2007, Broadcom Corporation * * Licensed under the GNU/GPL. See COPYING for details. -@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct +@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -289,7 +289,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -1577,7 +1577,7 @@ static inline u8 ssb_crc8(u8 crc, u8 data) { -@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus +@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus int i; for (i = 0; i < bus->sprom_size; i++) @@ -1657,7 +1657,7 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb +@@ -464,22 +515,32 @@ static void sprom_extract_r45(struct ssb memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); @@ -1666,7 +1666,17 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_ + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); /* extract the MAC address */ for (i = 0; i < 3; i++) { @@ -1682,7 +1692,7 @@ SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, SSB_SPROM8_ANTAVAIL_A_SHIFT); SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_ +@@ -490,12 +551,55 @@ static void sprom_extract_r8(struct ssb_ SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, SSB_SPROM8_ITSSI_A_SHIFT); @@ -1738,10 +1748,42 @@ /* Extract the antenna gain values. */ SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -509,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ +@@ -509,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -1770,7 +1812,7 @@ /* TODO - get remaining rev 8 stuff needed */ } -@@ -521,36 +644,34 @@ static int sprom_extract(struct ssb_bus +@@ -521,36 +682,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1828,7 +1870,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -564,13 +685,34 @@ static int sprom_extract(struct ssb_bus +@@ -564,13 +723,34 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1866,7 +1908,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -580,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -580,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1896,7 +1938,7 @@ err = 0; goto out_free; } -@@ -602,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -602,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -2292,7 +2334,7 @@ } bus->mmio = NULL; bus->mapped_device = NULL; -@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct +@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct SSB_BUG_ON(1); /* Can't reach this code. */ #endif break; @@ -3199,7 +3241,20 @@ #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,26 +25,62 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,26 +31,64 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -3266,10 +3321,12 @@ + u16 boardflags2_lo; /* Board flags (bits 32-47) */ + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ ++ ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; /* Antenna gain values for up to 4 antennas * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,14 +94,23 @@ struct ssb_sprom { +@@ -58,14 +102,23 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -3295,7 +3352,7 @@ }; -@@ -137,7 +182,7 @@ struct ssb_device { +@@ -137,7 +190,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -3304,7 +3361,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -195,10 +240,9 @@ struct ssb_driver { +@@ -195,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -3318,7 +3375,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -208,6 +252,7 @@ enum ssb_bustype { +@@ -208,6 +260,7 @@ enum ssb_bustype { SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ @@ -3326,7 +3383,7 @@ }; /* board_vendor */ -@@ -238,20 +283,33 @@ struct ssb_bus { +@@ -238,20 +291,33 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -3368,7 +3425,7 @@ #ifdef CONFIG_SSB_SPROM /* Mutex to protect the SPROM writing. */ -@@ -260,7 +318,8 @@ struct ssb_bus { +@@ -260,7 +326,8 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -3378,7 +3435,7 @@ u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -306,6 +365,11 @@ struct ssb_bus { +@@ -306,6 +373,11 @@ struct ssb_bus { #endif /* DEBUG */ }; @@ -3390,7 +3447,7 @@ /* The initialization-invariants. */ struct ssb_init_invariants { /* Versioning information about the PCB. */ -@@ -336,12 +400,23 @@ extern int ssb_bus_pcmciabus_register(st +@@ -336,12 +408,23 @@ extern int ssb_bus_pcmciabus_register(st struct pcmcia_device *pcmcia_dev, unsigned long baseaddr); #endif /* CONFIG_SSB_PCMCIAHOST */ @@ -3415,7 +3472,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -612,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -612,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -3684,7 +3741,7 @@ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,104 +267,257 @@ +@@ -264,104 +267,291 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ @@ -3925,6 +3982,39 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -3951,6 +4041,7 @@ +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x00DA +#define SSB_SPROM8_PA1HIB2 0x00DC ++ +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ diff --git a/target/linux/generic/patches-2.6.32/975-ssb_update.patch b/target/linux/generic/patches-2.6.32/975-ssb_update.patch index a619e6cc6b..4d4d608532 100644 --- a/target/linux/generic/patches-2.6.32/975-ssb_update.patch +++ b/target/linux/generic/patches-2.6.32/975-ssb_update.patch @@ -206,7 +206,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -509,15 +518,12 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -1381,7 +1381,7 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -470,6 +515,8 @@ static void sprom_extract_r45(struct ssb +@@ -470,13 +515,21 @@ static void sprom_extract_r45(struct ssb memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); @@ -1390,10 +1390,56 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -560,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -560,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -1422,7 +1468,7 @@ /* TODO - get remaining rev 8 stuff needed */ } -@@ -572,37 +644,34 @@ static int sprom_extract(struct ssb_bus +@@ -572,37 +682,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -1481,7 +1527,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -616,15 +685,14 @@ static int sprom_extract(struct ssb_bus +@@ -616,15 +723,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -1499,7 +1545,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -644,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -644,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1508,7 +1554,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -654,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -654,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -1538,7 +1584,7 @@ err = 0; goto out_free; } -@@ -676,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -676,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -2115,7 +2161,20 @@ #endif /* LINUX_SSB_PRIVATE_H_ */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,8 +25,10 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -2127,7 +2186,7 @@ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +57,10 @@ struct ssb_sprom { +@@ -55,6 +63,10 @@ struct ssb_sprom { u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ @@ -2138,7 +2197,16 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -88,6 +94,15 @@ struct ssb_sprom { +@@ -76,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -88,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -2154,7 +2222,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -95,7 +110,7 @@ struct ssb_sprom { +@@ -95,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -2163,7 +2231,7 @@ }; -@@ -167,7 +182,7 @@ struct ssb_device { +@@ -167,7 +190,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -2172,7 +2240,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -225,10 +240,9 @@ struct ssb_driver { +@@ -225,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -2186,7 +2254,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -269,7 +283,8 @@ struct ssb_bus { +@@ -269,7 +291,8 @@ struct ssb_bus { const struct ssb_bus_ops *ops; @@ -2196,7 +2264,7 @@ struct ssb_device *mapped_device; union { /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -@@ -281,14 +296,17 @@ struct ssb_bus { +@@ -281,14 +304,17 @@ struct ssb_bus { * On PCMCIA-host busses this is used to protect the whole MMIO access. */ spinlock_t bar_lock; @@ -2221,7 +2289,7 @@ /* See enum ssb_quirks */ unsigned int quirks; -@@ -300,7 +318,7 @@ struct ssb_bus { +@@ -300,7 +326,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -2230,7 +2298,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -396,7 +414,9 @@ extern bool ssb_is_sprom_available(struc +@@ -396,7 +422,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -2241,7 +2309,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -667,6 +687,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -667,6 +695,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -2607,7 +2675,7 @@ #define SSB_SPROM8_RSSISMF5G 0x000F #define SSB_SPROM8_RSSISMC5G 0x00F0 #define SSB_SPROM8_RSSISMC5G_SHIFT 4 -@@ -374,47 +420,104 @@ +@@ -374,47 +420,138 @@ #define SSB_SPROM8_RSSISAV5G_SHIFT 8 #define SSB_SPROM8_BXA5G 0x1800 #define SSB_SPROM8_BXA5G_SHIFT 11 @@ -2644,6 +2712,39 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -2687,6 +2788,7 @@ +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x00DA +#define SSB_SPROM8_PA1HIB2 0x00DC ++ +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ diff --git a/target/linux/generic/patches-2.6.36/941-ssb_update.patch b/target/linux/generic/patches-2.6.36/941-ssb_update.patch index e634a4a46c..80abe65979 100644 --- a/target/linux/generic/patches-2.6.36/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.36/941-ssb_update.patch @@ -417,7 +417,7 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb +@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); @@ -426,10 +426,56 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -458,7 +504,7 @@ /* TODO - get remaining rev 8 stuff needed */ } -@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -517,7 +563,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -535,7 +581,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -544,7 +590,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -574,7 +620,7 @@ err = 0; goto out_free; } -@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -711,7 +757,20 @@ } --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,8 +25,10 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -723,7 +782,7 @@ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +57,10 @@ struct ssb_sprom { +@@ -55,6 +63,10 @@ struct ssb_sprom { u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ @@ -734,7 +793,16 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -88,6 +94,15 @@ struct ssb_sprom { +@@ -76,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -88,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -750,7 +818,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -95,7 +110,7 @@ struct ssb_sprom { +@@ -95,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -759,7 +827,7 @@ }; -@@ -225,10 +240,9 @@ struct ssb_driver { +@@ -225,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -773,7 +841,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -304,7 +318,7 @@ struct ssb_bus { +@@ -304,7 +326,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -782,7 +850,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -793,7 +861,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -916,7 +984,7 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ -@@ -386,6 +432,23 @@ +@@ -386,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -937,10 +1005,50 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -416,6 +479,46 @@ +@@ -410,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ diff --git a/target/linux/generic/patches-2.6.37/020-ssb_update.patch b/target/linux/generic/patches-2.6.37/020-ssb_update.patch index b71b67598e..d773a4fc90 100644 --- a/target/linux/generic/patches-2.6.37/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.37/020-ssb_update.patch @@ -417,7 +417,7 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb +@@ -471,13 +515,21 @@ static void sprom_extract_r45(struct ssb memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); @@ -426,10 +426,56 @@ /* TODO - get remaining rev 4 stuff needed */ } -@@ -561,6 +607,31 @@ static void sprom_extract_r8(struct ssb_ + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -561,6 +613,63 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -458,7 +504,7 @@ /* TODO - get remaining rev 8 stuff needed */ } -@@ -573,37 +644,34 @@ static int sprom_extract(struct ssb_bus +@@ -573,37 +682,34 @@ static int sprom_extract(struct ssb_bus ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ memset(out->et1mac, 0xFF, 6); @@ -517,7 +563,7 @@ } if (out->boardflags_lo == 0xFFFF) -@@ -617,15 +685,14 @@ static int sprom_extract(struct ssb_bus +@@ -617,15 +723,14 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -535,7 +581,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -645,7 +712,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -645,7 +750,7 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) @@ -544,7 +590,7 @@ bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; sprom_do_read(bus, buf); err = sprom_check_crc(buf, bus->sprom_size); -@@ -655,17 +722,24 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -655,17 +760,24 @@ static int ssb_pci_sprom_get(struct ssb_ buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), GFP_KERNEL); if (!buf) @@ -574,7 +620,7 @@ err = 0; goto out_free; } -@@ -677,19 +751,15 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -677,19 +789,15 @@ static int ssb_pci_sprom_get(struct ssb_ out_free: kfree(buf); @@ -711,7 +757,20 @@ } --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,8 +25,10 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -723,7 +782,7 @@ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -55,6 +57,10 @@ struct ssb_sprom { +@@ -55,6 +63,10 @@ struct ssb_sprom { u8 tri5gl; /* 5.2GHz TX isolation */ u8 tri5g; /* 5.3GHz TX isolation */ u8 tri5gh; /* 5.8GHz TX isolation */ @@ -734,7 +793,16 @@ u8 rxpo2g; /* 2GHz RX power offset */ u8 rxpo5g; /* 5GHz RX power offset */ u8 rssisav2g; /* 2GHz RSSI params */ -@@ -88,6 +94,15 @@ struct ssb_sprom { +@@ -76,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -88,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -750,7 +818,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -95,7 +110,7 @@ struct ssb_sprom { +@@ -95,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -759,7 +827,7 @@ }; -@@ -225,10 +240,9 @@ struct ssb_driver { +@@ -225,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -773,7 +841,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -304,7 +318,7 @@ struct ssb_bus { +@@ -304,7 +326,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -782,7 +850,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -400,7 +414,9 @@ extern bool ssb_is_sprom_available(struc +@@ -400,7 +422,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -793,7 +861,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -514,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -514,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -888,7 +956,7 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ -@@ -387,6 +432,23 @@ +@@ -387,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -909,10 +977,50 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -417,6 +479,46 @@ +@@ -411,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ diff --git a/target/linux/generic/patches-2.6.38/020-ssb_update.patch b/target/linux/generic/patches-2.6.38/020-ssb_update.patch index a72a39b8ba..41556285e4 100644 --- a/target/linux/generic/patches-2.6.38/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.38/020-ssb_update.patch @@ -326,10 +326,57 @@ } SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, SSB_SPROM4_ANTAVAIL_A_SHIFT); -@@ -603,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ +@@ -519,7 +523,13 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -603,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -356,7 +403,7 @@ sprom_extract_r458(out, in); /* TODO - get remaining rev 8 stuff needed */ -@@ -641,7 +668,7 @@ static int sprom_extract(struct ssb_bus +@@ -641,7 +706,7 @@ static int sprom_extract(struct ssb_bus break; default: ssb_printk(KERN_WARNING PFX "Unsupported SPROM" @@ -365,7 +412,7 @@ " v1\n", out->revision); out->revision = 1; sprom_extract_r123(out, in); -@@ -658,7 +685,6 @@ static int sprom_extract(struct ssb_bus +@@ -658,7 +723,6 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -373,7 +420,7 @@ int err; u16 *buf; -@@ -666,7 +692,7 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -666,7 +730,7 @@ static int ssb_pci_sprom_get(struct ssb_ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); return -ENODEV; } @@ -382,7 +429,7 @@ /* * get SPROM offset: SSB_SPROM_BASE1 except for * chipcommon rev >= 31 or chip ID is 0x4312 and -@@ -703,10 +729,17 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -703,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_ if (err) { /* All CRC attempts failed. * Maybe there is no SPROM on the device? @@ -404,7 +451,7 @@ err = 0; goto out_free; } -@@ -724,12 +757,9 @@ out_free: +@@ -724,12 +795,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -460,7 +507,7 @@ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ -@@ -427,6 +432,23 @@ +@@ -427,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -481,10 +528,50 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -457,6 +479,46 @@ +@@ -451,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ @@ -1248,7 +1335,20 @@ /* core.c */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,8 +25,10 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -1260,7 +1360,16 @@ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -92,6 +94,15 @@ struct ssb_sprom { +@@ -80,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -92,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -1276,7 +1385,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -99,7 +110,7 @@ struct ssb_sprom { +@@ -99,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -1285,7 +1394,7 @@ }; -@@ -229,10 +240,9 @@ struct ssb_driver { +@@ -229,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -1299,7 +1408,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -308,7 +318,7 @@ struct ssb_bus { +@@ -308,7 +326,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -1308,7 +1417,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +414,9 @@ extern bool ssb_is_sprom_available(struc +@@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -1319,7 +1428,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); diff --git a/target/linux/generic/patches-2.6.39/020-ssb_update.patch b/target/linux/generic/patches-2.6.39/020-ssb_update.patch index be7071b93f..8113bca68f 100644 --- a/target/linux/generic/patches-2.6.39/020-ssb_update.patch +++ b/target/linux/generic/patches-2.6.39/020-ssb_update.patch @@ -787,10 +787,57 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ +@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -817,7 +864,7 @@ sprom_extract_r458(out, in); /* TODO - get remaining rev 8 stuff needed */ -@@ -662,7 +685,6 @@ static int sprom_extract(struct ssb_bus +@@ -662,7 +723,6 @@ static int sprom_extract(struct ssb_bus static int ssb_pci_sprom_get(struct ssb_bus *bus, struct ssb_sprom *sprom) { @@ -825,7 +872,7 @@ int err; u16 *buf; -@@ -707,10 +729,17 @@ static int ssb_pci_sprom_get(struct ssb_ +@@ -707,10 +767,17 @@ static int ssb_pci_sprom_get(struct ssb_ if (err) { /* All CRC attempts failed. * Maybe there is no SPROM on the device? @@ -847,7 +894,7 @@ err = 0; goto out_free; } -@@ -728,12 +757,9 @@ out_free: +@@ -728,12 +795,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -1024,7 +1071,20 @@ /* core.c */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,8 +25,10 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -1036,7 +1096,16 @@ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -92,6 +94,15 @@ struct ssb_sprom { +@@ -80,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -92,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -1052,7 +1121,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -99,7 +110,7 @@ struct ssb_sprom { +@@ -99,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -1061,7 +1130,7 @@ }; -@@ -229,10 +240,9 @@ struct ssb_driver { +@@ -229,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -1075,7 +1144,7 @@ extern void ssb_driver_unregister(struct ssb_driver *drv); -@@ -308,7 +318,7 @@ struct ssb_bus { +@@ -308,7 +326,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; @@ -1084,7 +1153,7 @@ u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; -@@ -404,7 +414,9 @@ extern bool ssb_is_sprom_available(struc +@@ -404,7 +422,9 @@ extern bool ssb_is_sprom_available(struc /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ @@ -1095,7 +1164,7 @@ /* Suspend a SSB bus. * Call this from the parent bus suspend routine. */ -@@ -518,6 +530,7 @@ extern int ssb_bus_may_powerdown(struct +@@ -518,6 +538,7 @@ extern int ssb_bus_may_powerdown(struct * Otherwise static always-on powercontrol will be used. */ extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); @@ -1157,7 +1226,7 @@ #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ -@@ -432,6 +432,23 @@ +@@ -432,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -1178,10 +1247,50 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -462,6 +479,46 @@ +@@ -456,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ diff --git a/target/linux/generic/patches-3.0/020-ssb_update.patch b/target/linux/generic/patches-3.0/020-ssb_update.patch index 74fb28c84e..5a77154101 100644 --- a/target/linux/generic/patches-3.0/020-ssb_update.patch +++ b/target/linux/generic/patches-3.0/020-ssb_update.patch @@ -322,10 +322,57 @@ * Copyright (C) 2005 Martin Langer * Copyright (C) 2005 Stefano Brivio * Copyright (C) 2005 Danny van Dyk -@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ +@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -352,7 +399,7 @@ sprom_extract_r458(out, in); /* TODO - get remaining rev 8 stuff needed */ -@@ -734,12 +757,9 @@ out_free: +@@ -734,12 +795,9 @@ out_free: static void ssb_pci_get_boardinfo(struct ssb_bus *bus, struct ssb_boardinfo *bi) { @@ -455,7 +502,20 @@ * Copyright (C) 2005 Danny van Dyk --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,8 +25,10 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,8 +31,10 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -467,7 +527,16 @@ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ u16 pa0b0; -@@ -92,6 +94,15 @@ struct ssb_sprom { +@@ -80,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -92,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -483,7 +552,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -99,7 +110,7 @@ struct ssb_sprom { +@@ -99,7 +118,7 @@ struct ssb_sprom { struct ssb_boardinfo { u16 vendor; u16 type; @@ -492,7 +561,7 @@ }; -@@ -229,10 +240,9 @@ struct ssb_driver { +@@ -229,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -519,7 +588,7 @@ */ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -432,6 +432,23 @@ +@@ -432,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -540,10 +609,50 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -462,6 +479,46 @@ +@@ -456,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ diff --git a/target/linux/generic/patches-3.1/020-ssb_update.patch b/target/linux/generic/patches-3.1/020-ssb_update.patch index c67097b3e6..843f970447 100644 --- a/target/linux/generic/patches-3.1/020-ssb_update.patch +++ b/target/linux/generic/patches-3.1/020-ssb_update.patch @@ -58,10 +58,57 @@ } --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ +@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -90,7 +137,20 @@ /* TODO - get remaining rev 8 stuff needed */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -25,7 +25,7 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -25,7 +31,7 @@ struct ssb_sprom { u8 et1phyaddr; /* MII address for enet1 */ u8 et0mdcport; /* MDIO for enet0 */ u8 et1mdcport; /* MDIO for enet1 */ @@ -99,7 +159,16 @@ u8 country_code; /* Country Code */ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ -@@ -94,6 +94,15 @@ struct ssb_sprom { +@@ -82,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -94,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -115,7 +184,7 @@ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ }; -@@ -231,10 +240,9 @@ struct ssb_driver { +@@ -231,10 +248,9 @@ struct ssb_driver { #define drv_to_ssb_drv(_drv) container_of(_drv, struct ssb_driver, drv) extern int __ssb_driver_register(struct ssb_driver *drv, struct module *owner); @@ -131,7 +200,7 @@ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -432,6 +432,23 @@ +@@ -432,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -152,10 +221,50 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -462,6 +479,46 @@ +@@ -456,12 +506,53 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ #define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ diff --git a/target/linux/generic/patches-3.2/020-ssb_update.patch b/target/linux/generic/patches-3.2/020-ssb_update.patch index 9e7bff9344..ca686f361c 100644 --- a/target/linux/generic/patches-3.2/020-ssb_update.patch +++ b/target/linux/generic/patches-3.2/020-ssb_update.patch @@ -1,9 +1,56 @@ --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c -@@ -607,6 +607,29 @@ static void sprom_extract_r8(struct ssb_ +@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -607,6 +613,61 @@ static void sprom_extract_r8(struct ssb_ memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, sizeof(out->antenna_gain.ghz5)); ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); @@ -32,7 +79,29 @@ /* TODO - get remaining rev 8 stuff needed */ --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -94,6 +94,15 @@ struct ssb_sprom { +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -82,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +@@ -94,6 +102,15 @@ struct ssb_sprom { } ghz5; /* 5GHz band */ } antenna_gain; @@ -50,7 +119,7 @@ --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -432,6 +432,23 @@ +@@ -432,6 +432,56 @@ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 @@ -71,13 +140,56 @@ +#define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 +#define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 +#define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ -@@ -464,6 +481,46 @@ +@@ -456,6 +506,7 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +@@ -502,6 +553,46 @@ + #define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ + #define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ - /* Values for boardflags_lo read from SPROM */ - #define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ ++/* Values for boardflags_lo read from SPROM */ ++#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ +#define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ +#define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ +#define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ @@ -116,8 +228,6 @@ +#define SSB_BFL2_SPUR_WAR 0x0200 /* has a workaround for clock-harmonic spurs */ +#define SSB_BFL2_GPLL_WAR 0x0400 /* altenative G-band PLL settings implemented */ + -+/* Values for boardflags_lo read from SPROM */ -+#define SSB_BFL_BTCOEXIST 0x0001 /* implements Bluetooth coexistance */ - #define SSB_BFL_PACTRL 0x0002 /* GPIO 9 controlling the PA */ - #define SSB_BFL_AIRLINEMODE 0x0004 /* implements GPIO 13 radio disable indication */ - #define SSB_BFL_RSSI 0x0008 /* software calculates nrssi slope. */ + /* Values for SSB_SPROM1_BINF_CCODE */ + enum { + SSB_SPROM1CCODE_WORLD = 0, diff --git a/target/linux/generic/patches-3.3/020-ssb_update.patch b/target/linux/generic/patches-3.3/020-ssb_update.patch new file mode 100644 index 0000000000..4435315d36 --- /dev/null +++ b/target/linux/generic/patches-3.3/020-ssb_update.patch @@ -0,0 +1,130 @@ +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -523,7 +523,13 @@ static void sprom_extract_r45(struct ssb + static void sprom_extract_r8(struct ssb_sprom *out, const u16 *in) + { + int i; +- u16 v; ++ u16 v, o; ++ u16 pwr_info_offset[] = { ++ SSB_SROM8_PWR_INFO_CORE0, SSB_SROM8_PWR_INFO_CORE1, ++ SSB_SROM8_PWR_INFO_CORE2, SSB_SROM8_PWR_INFO_CORE3 ++ }; ++ BUILD_BUG_ON(ARRAY_SIZE(pwr_info_offset) != ++ ARRAY_SIZE(out->core_pwr_info)); + + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +@@ -607,6 +613,38 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ /* Extract cores power info info */ ++ for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) { ++ o = pwr_info_offset[i]; ++ SPEX(core_pwr_info[i].itssi_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_ITSSI, SSB_SPROM8_2G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_2g, o + SSB_SROM8_2G_MAXP_ITSSI, ++ SSB_SPROM8_2G_MAXP, 0); ++ ++ SPEX(core_pwr_info[i].pa_2g[0], o + SSB_SROM8_2G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[1], o + SSB_SROM8_2G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_2g[2], o + SSB_SROM8_2G_PA_2, ~0, 0); ++ ++ SPEX(core_pwr_info[i].itssi_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_ITSSI, SSB_SPROM8_5G_ITSSI_SHIFT); ++ SPEX(core_pwr_info[i].maxpwr_5g, o + SSB_SROM8_5G_MAXP_ITSSI, ++ SSB_SPROM8_5G_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gh, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GH_MAXP, 0); ++ SPEX(core_pwr_info[i].maxpwr_5gl, o + SSB_SPROM8_5GHL_MAXP, ++ SSB_SPROM8_5GL_MAXP, SSB_SPROM8_5GL_MAXP_SHIFT); ++ ++ SPEX(core_pwr_info[i].pa_5gl[0], o + SSB_SROM8_5GL_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[1], o + SSB_SROM8_5GL_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gl[2], o + SSB_SROM8_5GL_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[0], o + SSB_SROM8_5G_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[1], o + SSB_SROM8_5G_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5g[2], o + SSB_SROM8_5G_PA_2, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[0], o + SSB_SROM8_5GH_PA_0, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[1], o + SSB_SROM8_5GH_PA_1, ~0, 0); ++ SPEX(core_pwr_info[i].pa_5gh[2], o + SSB_SROM8_5GH_PA_2, ~0, 0); ++ } ++ + /* Extract FEM info */ + SPEX(fem.ghz2.tssipos, SSB_SPROM8_FEM2G, + SSB_SROM8_FEM_TSSIPOS, SSB_SROM8_FEM_TSSIPOS_SHIFT); +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -16,6 +16,12 @@ struct pcmcia_device; + struct ssb_bus; + struct ssb_driver; + ++struct ssb_sprom_core_pwr_info { ++ u8 itssi_2g, itssi_5g; ++ u8 maxpwr_2g, maxpwr_5gl, maxpwr_5g, maxpwr_5gh; ++ u16 pa_2g[3], pa_5gl[3], pa_5g[3], pa_5gh[3]; ++}; ++ + struct ssb_sprom { + u8 revision; + u8 il0mac[6]; /* MAC address for 802.11b/g */ +@@ -82,6 +88,8 @@ struct ssb_sprom { + u16 boardflags2_hi; /* Board flags (bits 48-63) */ + /* TODO store board flags in a single u64 */ + ++ struct ssb_sprom_core_pwr_info core_pwr_info[4]; ++ + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the + * loss in the connectors is bigger than the gain. */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -449,6 +449,39 @@ + #define SSB_SPROM8_TS_SLP_OPT_CORRX 0x00B6 + #define SSB_SPROM8_FOC_HWIQ_IQSWP 0x00B8 + #define SSB_SPROM8_PHYCAL_TEMPDELTA 0x00BA ++ ++/* There are 4 blocks with power info sharing the same layout */ ++#define SSB_SROM8_PWR_INFO_CORE0 0x00C0 ++#define SSB_SROM8_PWR_INFO_CORE1 0x00E0 ++#define SSB_SROM8_PWR_INFO_CORE2 0x0100 ++#define SSB_SROM8_PWR_INFO_CORE3 0x0120 ++ ++#define SSB_SROM8_2G_MAXP_ITSSI 0x00 ++#define SSB_SPROM8_2G_MAXP 0x00FF ++#define SSB_SPROM8_2G_ITSSI 0xFF00 ++#define SSB_SPROM8_2G_ITSSI_SHIFT 8 ++#define SSB_SROM8_2G_PA_0 0x02 /* 2GHz power amp settings */ ++#define SSB_SROM8_2G_PA_1 0x04 ++#define SSB_SROM8_2G_PA_2 0x06 ++#define SSB_SROM8_5G_MAXP_ITSSI 0x08 /* 5GHz ITSSI and 5.3GHz Max Power */ ++#define SSB_SPROM8_5G_MAXP 0x00FF ++#define SSB_SPROM8_5G_ITSSI 0xFF00 ++#define SSB_SPROM8_5G_ITSSI_SHIFT 8 ++#define SSB_SPROM8_5GHL_MAXP 0x0A /* 5.2GHz and 5.8GHz Max Power */ ++#define SSB_SPROM8_5GH_MAXP 0x00FF ++#define SSB_SPROM8_5GL_MAXP 0xFF00 ++#define SSB_SPROM8_5GL_MAXP_SHIFT 8 ++#define SSB_SROM8_5G_PA_0 0x0C /* 5.3GHz power amp settings */ ++#define SSB_SROM8_5G_PA_1 0x0E ++#define SSB_SROM8_5G_PA_2 0x10 ++#define SSB_SROM8_5GL_PA_0 0x12 /* 5.2GHz power amp settings */ ++#define SSB_SROM8_5GL_PA_1 0x14 ++#define SSB_SROM8_5GL_PA_2 0x16 ++#define SSB_SROM8_5GH_PA_0 0x18 /* 5.8GHz power amp settings */ ++#define SSB_SROM8_5GH_PA_1 0x1A ++#define SSB_SROM8_5GH_PA_2 0x1C ++ ++/* TODO: Make it deprecated */ + #define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ + #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ +@@ -473,6 +506,7 @@ + #define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ + #define SSB_SPROM8_PA1HIB1 0x00DA + #define SSB_SPROM8_PA1HIB2 0x00DC ++ + #define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ + #define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ + #define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */