rpcd: iwinfo plugin fixes
[openwrt/svn-archive/archive.git] / target / linux / lantiq / base-files /
2016-05-10 Luka Perkovimage / basefiles: make console password configurable
2016-04-26 John Crispinlantiq: Fix typo in LED diag script.
2016-04-09 John Crispinlantiq-dsl: add missing blank in dsl output
2016-04-09 John Crispinlantiq-dsl: bugfix latency values swapped for lucistat
2016-04-09 John Crispinlantiq-dsl: bugfix db negative sign after comma
2016-03-07 Felix Fietkaulantiq: print profile name in dsl lucistat
2016-03-07 Felix Fietkaulantiq: do not set default firmware file
2016-02-12 John Crispinuse "-gt" instead of ">" with [ in /lib/functions/lanti...
2016-01-18 Hauke Mehrtenslantiq: add support for TP-Link VR200v
2016-01-18 Felix Fietkaulantiq: fix VDSL device detection with Linux 4.4
2016-01-01 John Crispinlantiq: match default xdsl mode and default wan interface
2016-01-01 John Crispinlantiq: convert vendorid into human readable form
2016-01-01 John Crispinlantiq: add the current profile to the stats output
2016-01-01 John Crispinlantiq: use devicename:colour:function led naming scheme
2016-01-01 John Crispinlantiq: add support for indicating the boot state using...
2016-01-01 John Crispinlantiq: use dsl led defined in DTS
2016-01-01 John Crispinlantiq: use power leds defined in DTS
2016-01-01 John Crispinlantiq: use default leds defined in DTS
2016-01-01 John Crispinlantiq: BTHOMEHUBV2B - remove missing usb led workaround
2015-12-17 John Crispinlantiq: Fix LED handling.
2015-12-11 Jo-Philipp Wichall: drop old uci-defaults.sh
2015-12-11 John Crispinlantiq: fix led setup after switch to uci-defaults...
2015-12-06 Jo-Philipp Wichlantiq: fix logic error in dsl board.d code
2015-12-05 Felix Fietkaulantiq: add VDSL2 vectoring status information
2015-12-05 Felix Fietkaulantiq: get rid of the dsl_fw mtd partition
2015-12-04 Felix Fietkaulantiq: move esi calls to dsl_cpe_control scripts to...
2015-12-04 Jo-Philipp Wichlantiq: switch from uci-defaults to board.d
2015-10-19 John Crispinlantiq: Synchronize access to the DSL command pipe
2015-10-11 John Crispinlantiq: bugfix wrong non pre-emptive crc errors output
2015-10-07 John Crispinlantiq: bugfix luci lantiq_dsl status
2015-10-05 John Crispinlantiq: several ARV7519RW22 fixes
2015-10-05 John Crispinlantiq: Add target TP-Link TD-W8980
2015-10-05 John Crispinlantiq: bugfix uninitialized variables
2015-09-15 Rafał Miłeckilantiq: update list on NAND devices in platform_pre_upgrade
2015-09-15 John Crispinlantiq: add platform_pre_upgrade for sysupgrade
2015-09-14 John Crispinlantiq: get more status information from xDSL
2015-07-07 John Crispinlantiq: Add support for Arcadyan ARV8539PW22 (Speedport...
2015-07-07 John Crispinlantiq: Add support for the BT Home Hub 5A
2015-06-05 John Crispinlantiq: Add support for Arcadyan VGV7510KW22 (known...
2015-02-09 John Crispinlantiq: td-w8970: fix failsafe mode
2015-01-18 John Crispinlantiq: DGN3500 cleanups
2015-01-18 John Crispinlantiq: Fix initscript issue
2015-01-17 John CrispinAdd profile and userspace for P2812HNUF1/3, switch...
2015-01-08 John Crispinlantiq: BT Home Hub 3A - userspace
2015-01-08 John Crispinlantiq: Fix adsl led on Home Hub 2B
2014-11-14 John Crispinlantiq: vgv7519 - set some defaults for leds
2014-11-14 John Crispinlantiq: set default led configuration from /sys entry...
2014-10-29 John Crispinlantiq: vgv7519: fix board_config on dts, read mac...
2014-10-29 John Crispinlantiq_dsl.sh: properly detect vdsl_cpe_control and...
2014-10-06 John Crispinlantiq - vgv7519: load rt5362 eeprom from bootloader...
2014-10-06 John Crispinlantiq: led name has changed from adsl -> dsl
2014-09-16 John CrispinLantiq: fix build warning from dsl_fs script
2014-09-15 John Crispinlantiq: add default switch setup to td8970
2014-08-18 John Crispinlantiq: improve ARV7519RW22 support
2014-07-14 John Crispinlantiq: detect board in preinit state
2014-07-10 John Crispinlantiq: generate /tmp/sysinfo/lantiq_board_name if...
2014-07-10 John Crispinlantiq: enable SysupgradeNAND for BTHOMEHUBV2B
2014-07-02 John Crispinlantiq: add support for /tmp/sysinfo
2014-06-02 John Crispintarget/linux/*/base-files/lib/upgrade/platform.sh ...
2014-05-06 Felix Fietkaulantiq: support loading the dsl firmware from a flash...
2014-04-11 John Crispinlantiq: more vdsl related cleanups
2014-04-10 John Crispinlantiq: move the dsl-modem config to network.@dsl-modem[-1]
2014-04-09 John Crispinlantiq: make dsl_notify.sh executable
2014-04-05 John Crispinlantiq: cleanup the dsl control scripts
2014-04-03 John Crispinlantiq: BT Home Hub 2B support - userspace
2014-03-30 John Crispinlntiq: add support for Astoria ARV7519RW.
2014-03-30 John Crispinlantiq: do an endianness swap to the RT2860 eeprom...
2014-03-30 John Crispinlantiq: add esi
2014-03-30 John Crispinlantiq: fix initial VLAN conf for P2601HNFX
2014-03-30 John Crispinlantiq: add support for Arcadyan ARV7519PW
2014-03-30 John Crispinlantiq: add support for ZyXEL P2812HNUFX
2014-01-15 John Crispinlantiq: Add support for Astoria ARV7510PW22
2014-01-12 John Crispinlantiq: improve Arcadyan ARV4510PW support
2013-11-11 John Crispinlantiq: DGN3500 fixups
2013-11-11 John Crispinlantiq: remove old hotplug handler
2013-11-07 John Crispinlantiq: fix TDW8970 lan/wan mac
2013-11-07 John Crispinlantiq: Fix ar8216 switch configuration for WBMR-HP...
2013-10-08 John Crispinlantiq: fix up diag.sh
2013-09-19 Luka Perkovlantiq: add support for ZyXEL P2601HNFX
2013-09-19 Luka Perkovlantiq: add support for ZTE H201L
2013-09-17 John Crispinlantiq: add v3.10 patches
2013-08-06 John Crispinlantiq: add tplink header id to sysupgrade and fix...
2013-08-06 Luka Perkovlantiq: add (incomplete) support for Aztech GR7000
2013-08-05 John Crispinlantiq: several a803 related fixes
2013-08-01 John Crispinlantiq: fix VG3503J ethernet/gphy led support
2013-07-25 John Crispinlantiq: add a hook to make leds work on the secondary...
2013-07-15 Felix Fietkaulantiq: update ralink wlan firmware hotplug script...
2013-06-10 John Crispinlantiq: diag.sh with both red and green power LEDs
2013-05-30 John Crispinlantiq: Fix ar8216 switch configuration
2013-05-30 John Crispinlantiq: DGN3500 support
2013-05-30 John Crispinlantiq: fix LED-handling oversights
2013-04-25 John Crispinlantiq: make leds and network work on VG3503J
2013-04-25 John Crispinlantiq: fix board detection helpers
2013-04-09 Steven BarthAdapt default network configuration for IPv6
2013-04-03 John Crispin[lantiq] Migrate lantiq platform to common led helper...
2013-03-12 John Crispin[lantiq] add support for AudioCodes AC-252
2013-01-18 Jo-Philipp Wichall targets: use numerically prefixed uci-defaults...
2012-12-21 John Crispin[lantiq] default switch setup for WBMR
2012-12-21 John Crispin[lantiq] adds script to set wps info on boards with...
2012-12-21 John Crispin[lantiq] improve button handling
next