ramips: enable second SPI for VoCore
[openwrt/svn-archive/archive.git] / target / linux / ramips / patches-3.10 /
2014-08-25 John Crispinramips: second spi device on rt5350
2014-08-01 John Crispinramips: Add support for SPI_CS1 pinmux
2014-07-14 John Crispinramips: squelch mdio debugging info on rt2880 ethernet
2014-07-02 John Crispinralink: make xhci platform depend on mt7621
2014-07-01 John Crispinramips: set default vid of each vlan, so it won't need...
2014-07-01 John Crispinramips: enable wmac clock for mt7620
2014-06-26 John Crispinralink: refresh kernel patches
2014-06-24 John Crispinralink: Update MT7530 switch driver.
2014-06-16 John Crispinramips: RT-N56U support fixes and factory image creation
2014-04-23 John Crispinramips: register clock device for the WMAC on RT3883
2014-04-13 John Crispinralink: add port_init for rt2880
2014-04-12 John CrispinFix pinmux-rt2880
2014-04-12 John CrispinAdd wmac clock for rt2880
2014-04-12 Gabor Juhoskernel: update 3.10 to 3.10.36
2014-04-06 Felix Fietkauramips: fix regression from r39949 (#15382)
2014-03-30 John Crispinralink: fix chuncked-io module
2014-03-27 Gabor Juhoskernel: update 3.10 to 3.10.34
2014-03-18 John Crispinralink: refresh patches
2014-03-12 John Crispinralink: add missing clk_set_rate()
2014-02-23 Gabor Juhoskernel: update 3.10 to 3.10.32
2014-02-18 John Crispinralink: fix the gpio mode mapping
2014-01-26 Gabor Juhoskernel: update 3.10 to 3.10.28
2014-01-19 John Crispinralink: backport various fixes from linux-mti
2014-01-19 John Crispinralink: add xhci driver
2014-01-12 John Crispinralink: fix uartf memory range size
2014-01-12 John Crispinralink: honour memory@0 node
2014-01-12 John Crispinralink: fix rt5350 ethernet
2014-01-11 Gabor Juhoskernel: update 3.10 to 3.10.26
2013-12-27 John Crispinralink: fix tso regression in the ethernet driver
2013-12-13 John Crispinralink: add mt7621 support
2013-12-09 John Crispinralink: add TSO
2013-12-09 John Crispinralink: fix typo in gpio irq handling
2013-12-09 John Crispinralink: add partially working asoc driver. codec is...
2013-12-09 John Crispinralink: add helper that identifies the mt7620 ECO
2013-12-09 John Crispinralink: add dma engine support
2013-12-01 Gabor Juhoskernel: update 3.10 to 3.10.21
2013-11-25 John Crispinralink: fix up the mt7530 driver to work properly with...
2013-11-25 John Crispinralink: add LRO support
2013-11-25 John Crispinralink: add NETIF_F_HW_VLAN_CTAG_TX support for the...
2013-11-18 John Crispinralink: improve mt7620n detection
2013-11-18 John Crispinralink: add mt7620 nand driver
2013-11-07 John Crispinralink: fix c&p error in gpio driver
2013-11-05 Gabor Juhoskernel: update 3.10 to 3.10.18
2013-10-28 John Crispinralink: add support for missing mt7620 mux values
2013-10-26 John Crispinralink: pinctrl fix for non muxed pins
2013-10-23 Gabor Juhoskernel: update 3.10 to 3.10.17
2013-10-08 John Crispinralink: add support for the mt7530 eval board
2013-10-08 John Crispinralink: add missing header file to mt7530 driver
2013-10-07 John Crispinralink: split mt7530 driver out of the gsw driver
2013-10-07 John Crispinralink: make cevt systick selectable via kconfig
2013-10-07 John Crispinralink: fix mt7620a pinmux
2013-09-25 Gabor Juhoskernel/3.10: refresh all target patches
2013-09-19 John Crispinralink: make dcs930 uvc camera work
2013-09-19 John Crispinralink: add back dwc_otg driver
2013-09-17 John Crispinralink: add pinctrl driver
2013-09-15 Gabor Juhoskernel: update 3.10 to 3.10.12
2013-08-23 Gabor Juhoskernel: update 3.10 to 3.10.9
2013-08-23 Gabor Juhosramips: remove lantiq specific patches
2013-08-23 Gabor Juhosramips: update the RT3883 PCI patch
2013-08-14 John Crispinramips: update v3.10 patches
2013-08-05 Gabor Juhosramips: re-implement PCI mux
2013-07-27 John Crispinralink: gpio driver should not set gpio to input when...
2013-07-27 John Crispinramips: add back dwc_otg driver
2013-07-26 Gabor Juhoskernel: update 3.10 to 3.10.3
2013-07-22 Gabor Juhoskernel: update 3.10 to 3.10.2
2013-07-15 John Crispinramips: fix ehci/ohci OF binding
2013-07-15 John Crispinramips: add a explicit reset to dwc2
2013-07-15 John Crispinramips: add a patch to make dwc2 work with boards that...
2013-07-15 John Crispinramips: add ralink v3.10 support