brcm63xx: image: move image argument to front in *DTB calls
[openwrt/svn-archive/archive.git] / target /
2015-02-27 Jonas Gorskibrcm63xx: image: move image argument to front in *DTB...
2015-02-27 Jonas Gorskibrcm63xx: add dts and profile for Livebox
2015-02-27 Jonas Gorskibrcm63xx: allow lzma to use 32MB RAM
2015-02-27 Jonas Gorskipackage: mtd: move bcm963xx_tag definition into source...
2015-02-27 Jonas Gorskibrcm63xx: do not align squashfs rootfs start
2015-02-27 Jonas Gorskibrcm63xx: drop call to prepare_generic_squashfs
2015-02-27 Felix Fietkaukernel: fix 3.18+ if_bridge.h header conflict with...
2015-02-24 Imre Kalozgeneric/4.0: refresh patches
2015-02-24 Imre Kalozgeneric/4.0: drop patches applied upstream
2015-02-24 Imre Kalozgeneric/4.0: drop 3.18 specifix dwc2 backport
2015-02-24 Imre Kalozgeneric/4.0: the ubi patches has been fixed in the...
2015-02-24 John Crispinar71xx: refresh patches
2015-02-24 John Crispinar71xx: Add QCA953X version2 SoC support
2015-02-24 John Crispinar71xx: TL-WA7210n v2 support
2015-02-24 John Crispinipq806x: add ahci to default packages
2015-02-24 John Crispinipq806x: add default package selection
2015-02-24 John Crispinipq806x: initialize the network on AP148
2015-02-24 John Crispinipq806x: enable GMAC support in DTS
2015-02-24 John Crispinipq806x: enable ar8xxx switch family support
2015-02-24 John Crispinipq806x: fix spi read issues observed with SMP enabled
2015-02-24 John Crispinmpc85xx: add 3.19 support
2015-02-24 Rafał Miłeckigeneric: fix 050-backport_netfilter_rtcache.patch
2015-02-24 Felix Fietkaux86: remove spurious delete of /etc/config/network
2015-02-23 Rafał Miłeckigeneric: early (incomplete!) 4.0 support
2015-02-23 Imre Kalozmvebu: set default WRT1900AC switch config
2015-02-23 Imre Kalozmvebu: set WRT1900AC WAN interface MAC address
2015-02-22 John Crispinipq806x: delete config-3.14 file
2015-02-22 John Crispinipq806x: fix "reboot" command
2015-02-22 John Crispinipq806x: enable watchdog kernel option
2015-02-22 John Crispinkernel: Fix USB gadget modules for v3.18
2015-02-22 John Crispinmpc85xx: add mpic timer clock frequency to avoid boot...
2015-02-22 John Crispinramips: rt288x: add missing symbol
2015-02-22 John Crispinramips: nexx wt3020: fix status led
2015-02-20 Rafał Miłeckibcm53xx: add one more NVRAM possible size (0x180000)
2015-02-19 John Crispinmpc85xx: set v3.18 as default
2015-02-19 John Crispinralink: bump to v3.18
2015-02-19 John Crispinramips: fix the mt7628 dts file
2015-02-19 John Crispinat91: Add dts for Exegin Q5x boards.
2015-02-19 John Crispinat91: USB gadget subsystem cleanup and driver fix.
2015-02-19 John Crispinat91: Enable power and reset controller drivers.
2015-02-18 John Crispinat91: bump to v3.18
2015-02-18 John Crispinau1000: fix 3.18 and set it as default
2015-02-17 Jo-Philipp Wichar71xx: fix 82_patch_ath10k
2015-02-17 John Crispinmpc85xx: add v3.18 support
2015-02-17 John Crispinar71xx: make v3.18 default
2015-02-17 John Crispinkernel: re-enable the firmware loader
2015-02-16 John Crispinramips: Buffalo WZR-AGL300NH target support
2015-02-16 John Crispinramips: enables rt288x PCIe
2015-02-16 John Crispinoxnas: fix itb generation
2015-02-16 Rafał Miłeckibcm53xx: include kmod-brcmfmac in default profile
2015-02-16 Rafał Miłeckibcm53xx: sprom: extract for PCI host
2015-02-16 Rafał Miłeckibcm53xx: sprom: prepare to support other hosttype-s
2015-02-16 Imre Kalozmvebu: refresh 3.18 patches
2015-02-15 John Crispinar71xx: fix mv88e6063 compile for 3.14
2015-02-15 John Crispinar71xx: fix a compile bug in 902-unaligned_access_hacks...
2015-02-15 John Crispinar71xx: add v3.18 support
2015-02-14 Imre Kalozmvebu: fix WRT1900AC ubinized images
2015-02-14 John Crispinralink: fix the config files
2015-02-14 John Crispinar71xx: ZyXEL NBG6716 rfkill switch fix
2015-02-14 John Crispinlantiq: disable buffered writes on Intel command set...
2015-02-14 John Crispinlantiq: Fix flash for targets with NO_XIP
2015-02-14 John Crispinbrcm2708: add kmod-hwmon-bcm2835 support and more missi...
2015-02-14 John Crispinbrcm2708: force uart as the default console for procd...
2015-02-14 John Crispinbrcm2708: add board detection and LED support
2015-02-14 Nicolas Thillgeneric: ocf: irq compat stuff is not needed anymore
2015-02-14 Imre Kalozgeneric: upgrade to 3.18.7
2015-02-13 John Crispinixp4xx: fix gpio_line_set() logic, fixes #18986
2015-02-13 John Crispinbrcm2708: fix spidev
2015-02-13 John Crispinbrcm2708: refresh patches
2015-02-13 John Crispinbrcm2708: add missing config symbols and fix kernel...
2015-02-13 John Crispinbrcm2708: add subtarget copyright and use better board...
2015-02-13 John Crispinar7: switch to v3.18
2015-02-13 John Crispingeneric: improve kexec support of MIPS.
2015-02-13 John Crispinlantiq: fix DGN3500 root device
2015-02-13 John Crispinar71xx: Add profile and build image for TP-Link MR12U v1
2015-02-13 John Crispinar71xx: Add user-space support for TP-Link MR12U v1
2015-02-13 John Crispinar71xx: ZyXEL NBG6716 add gpio usb power on/off
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: fix passed info about buf...
2015-02-12 Nicolas Thillsunxi: A20-OLinuXino-Lime profile rename leftover
2015-02-12 Luka Perkovkirkwood: Seagate GoFlex Net
2015-02-12 John Crispinlantiq: make m25p80 work again
2015-02-12 John Crispinlantiq: fix mac addr assignment inside lantiq_etop
2015-02-12 John Crispinlantiq: PCI should be enabled on vrx200
2015-02-12 John Crispinralink: make the mt7621 irq core with with the new...
2015-02-12 John Crispinar71xx: ZyXEL NBG6716 led/buttons cleanup
2015-02-12 John Crispingeneric: fix broken patch in the transition of 3.19...
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: read more data to match Edimax...
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: use separated buffer for readi...
2015-02-12 Rafał Miłeckikernel: mtdsplit_uimage: add parser for Edimax devices
2015-02-12 Rafał Miłeckimtdsplit_uimage: more generic header verify function
2015-02-11 Rafał Miłeckikernel: fix bgmac check for chip ID
2015-02-11 Rafał Miłeckikernel: backport mainlined bgmac patches from 3.19
2015-02-11 Rafał Miłeckibcm53xx: use bcm47xx_wdt for restarting device
2015-02-11 John Crispinoxnas: disable usbgadget support
2015-02-11 John Crispinbrcm2708: add missing SUBTARGETS:= to makefile
2015-02-11 John Crispinbrcm2708: remove CMA_DEBUG
2015-02-11 John Crispinbrcm2708: add Raspberry Pi 2 support
2015-02-11 John Crispinbrcm2708: remove 3.14 support
2015-02-11 John Crispinralink: fix when tx done is 0 also need to clean interr...
2015-02-11 Nicolas Thillramips/mt7620: add missing config symbol
next