[ramips] add profile for the Edimax 3g-6200NL board
[openwrt/svn-archive/archive.git] / target /
2013-04-03 John Crispin[ramips] add profile for the Edimax 3g-6200NL board
2013-04-03 John Crispin[ramips] there is no ttyS1 console
2013-04-03 John Crispin[ramips] make v3.8 the default
2013-04-03 John Crispin[ramips] add new image/Makefile
2013-04-03 John Crispin[ramips] add the dts files that describe the boards...
2013-04-03 John Crispin[ramips] fix upvel profile names
2013-04-03 John Crispin[ramips] fix rt3883 config-3.8
2013-04-03 John Crispin[ramips] fix rt305x config-3.8
2013-04-03 John Crispin[ramips] mark rt288x broken until the test hardware...
2013-04-03 John Crispin[ramips] add patches for v3.8
2013-04-03 John Crispin[ramips] remove old ralink 3.8 patches
2013-04-03 John Crispin[ramips] move files to files-3.7
2013-04-03 John Crispin[ramips] add feature gpio
2013-04-03 John Crispin[generic] add OF support to rtl8367b driver
2013-04-03 John Crispin[generic] make firmware loading work on v3.9
2013-04-01 Felix Fietkaumpc85xx: enable ath9k and wpad-mini by default
2013-03-27 Hauke Mehrtensbrcm47xx: generate images for Linksys E.... models
2013-03-27 Hauke Mehrtensgemini: remove usage of ehci_port_power() it was remove...
2013-03-27 Hauke Mehrtensbrcm47xx: activate image generation for some Netgear...
2013-03-27 Hauke Mehrtensbrcm47xx: generate images for more WRT...N models
2013-03-25 Imre Kaloz[gemini]: upgrade to 3.9-rc4, disable unsupported boards
2013-03-25 Imre Kaloz[generic/3.9]: refresh patches against -rc4
2013-03-25 Imre Kaloz[generic/3.9]: add missing symbols
2013-03-25 Gabor Juhosar71xx: fix ethernet LEDs on the TL-WDR3500
2013-03-25 Gabor Juhosar71xx: add GPIO output select values for AR934x
2013-03-24 Gabor Juhosar71xx: add default LED configuration for the WL-WRD3500
2013-03-24 Gabor Juhosar71xx: fix USB power GPIO on the TL-WDR3500
2013-03-24 Gabor Juhosar71xx: remove numeric suffix of the TL-WDR3500 USB LED
2013-03-24 Gabor Juhosar71xx: add diag support for the TL-WDR3500
2013-03-24 Gabor Juhosar71xx: add default switch configuration for the TL...
2013-03-24 Hauke Mehrtenskernel: add missing config options for au1000 target
2013-03-21 Hauke Mehrtenskernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config...
2013-03-21 Hauke Mehrtenskernel: REGMAP_SPI should only be selectable when SPI_M...
2013-03-20 Hauke Mehrtensbrcm47xx: generate images for some more devices
2013-03-20 Hauke Mehrtenskernel: add some fixes for kernel 3.9
2013-03-20 Hauke Mehrtenskernel: add some missing config options for kernel 3.9
2013-03-19 Florian Fainellikernel: make SND_COMPRESS_OFFLOAD symbol visible for...
2013-03-17 Florian Fainelliuml: remove 3.6 kernel patches
2013-03-17 Florian Fainelliuml: remove 3.3. kernel patches
2013-03-17 Florian Fainelliuml: switch to 3.8 kernel
2013-03-17 Florian Fainelliuml: add support for 3.8 kernel
2013-03-17 Florian Fainelliuml: remove 3.2 patches
2013-03-17 Florian Fainelliep93xx: switch to 3.8 kernel
2013-03-17 Florian Fainellikernel: refresh 3.9 patches
2013-03-17 Florian Fainelliep93xx: add support for 3.8 kernel
2013-03-17 Florian Fainelliep93xx: account for sound soc directory rename in 3.7
2013-03-17 Florian Fainellikernel: set regmap-core module license
2013-03-17 Florian Fainelliau1000: remove support for 3.3. kernel
2013-03-17 Florian Fainelliau1000: switch to 3.6 kernel
2013-03-17 Florian Fainelliau1000: keep the MTX-1 watchdog pin low during boot
2013-03-17 Florian Fainelliep93xx: remove 3.3 kernel support
2013-03-17 Florian Fainellimcs814x: use devm_request_and_ioremap in mcs814x-rng...
2013-03-17 Florian Fainellimcs814x: use devm_request_and_ioremap helper for nuport...
2013-03-17 Florian Fainellimcs814x: remove PCI code
2013-03-16 Florian Fainellimcs814x: implement MULTI_IRQ_HANDLER
2013-03-16 Florian Fainellimcs814x: use the standard device tree binding to repres...
2013-03-15 Gabor Juhosmpc85xx: add profile and build image for the TL-WDR4900...
2013-03-15 Gabor Juhosgeneric: ar8216: start AR8327 switch from the probe...
2013-03-15 Gabor Juhosgeneric: ar8216: add ar8xxx_start helper
2013-03-15 Gabor Juhosmpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
2013-03-15 Gabor Juhosgeneric: ar8216: add OF configuration support for AR8327
2013-03-15 Gabor Juhosgeneric: ar8216: separate platform_data based AR8327...
2013-03-15 Gabor Juhosgeneric: ar8216: don't use platform_data in ar8327_init...
2013-03-15 Gabor Juhosgeneric: ar8216: move the ar8327_get_port_init_status...
2013-03-15 Gabor Juhosgeneric: ar8216: simplify and rename ar8327_config_port
2013-03-15 Gabor Juhosgeneric: ar8216: remove superfluous pdata checks
2013-03-15 Gabor Juhoskernel: update linux 3.8 to 3.8.3
2013-03-15 Gabor Juhosar71xx: build images for the TL-MR11U v2
2013-03-15 Gabor Juhosar71xx: rw2458n - Use eeprom (art) from wifi card
2013-03-15 Gabor Juhosar71xx: Error fix in Kernel for MR3420v2 Ethernet Switc...
2013-03-14 John Crispin[lantiq] ACMP252: fix USB-enable GPIO and use default...
2013-03-14 John Crispin[lantiq] fix buttons on vr9 eval kit
2013-03-14 John Crispin[lantiq] select vdsl packages on vr9 boards
2013-03-14 John Crispin[lantiq] fix fritzbox 3370 partitions/memory/cmdline
2013-03-14 John Crispin[lantiq] build jffs images for nand based fritzbox
2013-03-14 John Crispin[lantiq] bump to v3.8
2013-03-14 John Crispin[lantiq] move GPHY FW blobs to non versioned folder
2013-03-14 Florian Fainellikernel: add support for 3.9-rc2
2013-03-13 John Crispin[base-files/generic] update the /init file to start...
2013-03-13 John Crispin[ar71xx] make sure the console works when using procd...
2013-03-12 Gabor Juhosgemini: remove 3.3 support
2013-03-12 Gabor Juhosgemini: switch to 3.8
2013-03-12 Gabor Juhosgemini: add support for 3.8
2013-03-12 John Crispin[lantiq] fixes NO_XIP on CFI0001 flash
2013-03-12 John Crispin[lantiq] add support for AudioCodes AC-252
2013-03-12 John Crispin[lantiq] unbreak dgn3500 spi-gpio
2013-03-12 John Crispin[ramips] make sure errors get sent to /dev/null
2013-03-12 John Crispin[ar71xx] make sure errors get sent to /dev/null
2013-03-12 Gabor Juhosavr32: remove 3.3 support
2013-03-12 Gabor Juhosavr32: switch to 3.8
2013-03-12 Gabor Juhosavr32: add support for 3.8
2013-03-12 Gabor Juhosavr32: add sysupgrade support
2013-03-12 Gabor Juhosavr32: add firmware partition
2013-03-12 Gabor Juhosavr32: add diag support
2013-03-12 Gabor Juhosavr32: create network config dynamically
2013-03-12 Gabor Juhosavr32: built the firmware images from the lzma compress...
2013-03-12 Gabor Juhosmpc52xx: remove 3.3 support
2013-03-12 Gabor Juhosmpc52xx: switch to 3.8
2013-03-12 Gabor Juhosmpc52xx: add support for 3.8
2013-03-11 Gabor Juhosramips: add profile and build image for the Upvel UR...
next