John Crispin [Mon, 14 Nov 2011 18:55:58 +0000 (18:55 +0000)]
lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci
SVN-Revision: 29129
Gabor Juhos [Mon, 14 Nov 2011 17:43:15 +0000 (17:43 +0000)]
ar71xx: fix USB LED on the DB120 board
SVN-Revision: 29126
Gabor Juhos [Mon, 14 Nov 2011 17:43:14 +0000 (17:43 +0000)]
ar71xx: add a function for selecting output signal on a given GPIO pin
SVN-Revision: 29125
Gabor Juhos [Mon, 14 Nov 2011 17:43:13 +0000 (17:43 +0000)]
ar71xx: fix GPIO function handling on AR934x
SVN-Revision: 29124
Gabor Juhos [Mon, 14 Nov 2011 17:43:11 +0000 (17:43 +0000)]
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
SVN-Revision: 29123
Gabor Juhos [Mon, 14 Nov 2011 17:43:10 +0000 (17:43 +0000)]
ar71xx: merge nand scan patch
SVN-Revision: 29122
Felix Fietkau [Mon, 14 Nov 2011 14:06:37 +0000 (14:06 +0000)]
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 29116
Felix Fietkau [Mon, 14 Nov 2011 14:06:32 +0000 (14:06 +0000)]
netifd: update to latest version, fixes tcp connection loss issues on dhcp rekey
SVN-Revision: 29115
Jo-Philipp Wich [Mon, 14 Nov 2011 13:18:09 +0000 (13:18 +0000)]
[package] uci: update to latest git rev
7289b2d69aaffa9299b47aaaa0da1e9969ace6c1
SVN-Revision: 29111
Gabor Juhos [Mon, 14 Nov 2011 13:07:47 +0000 (13:07 +0000)]
ar71xx: fix a compiler warning
SVN-Revision: 29110
Gabor Juhos [Mon, 14 Nov 2011 13:07:45 +0000 (13:07 +0000)]
ar71xx: fix GPIO count for AR934x
SVN-Revision: 29109
Gabor Juhos [Mon, 14 Nov 2011 11:49:53 +0000 (11:49 +0000)]
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
Gabor Juhos [Mon, 14 Nov 2011 11:49:51 +0000 (11:49 +0000)]
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
Gabor Juhos [Mon, 14 Nov 2011 11:49:49 +0000 (11:49 +0000)]
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
Gabor Juhos [Mon, 14 Nov 2011 11:49:47 +0000 (11:49 +0000)]
ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
Gabor Juhos [Mon, 14 Nov 2011 07:38:09 +0000 (07:38 +0000)]
ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
Gabor Juhos [Mon, 14 Nov 2011 07:38:07 +0000 (07:38 +0000)]
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
Gabor Juhos [Mon, 14 Nov 2011 07:38:05 +0000 (07:38 +0000)]
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
Florian Fainelli [Sun, 13 Nov 2011 19:19:22 +0000 (19:19 +0000)]
[brcm63xx] build images for Pirelli A226M (#10409)
SVN-Revision: 29045
Florian Fainelli [Sun, 13 Nov 2011 19:19:18 +0000 (19:19 +0000)]
[brcm63xx] register uart0 on DWV-S0 boards (#10409)
SVN-Revision: 29044
Florian Fainelli [Sun, 13 Nov 2011 19:19:14 +0000 (19:19 +0000)]
[kernel] refresh 3.0 patches
SVN-Revision: 29043
Florian Fainelli [Sun, 13 Nov 2011 19:19:10 +0000 (19:19 +0000)]
[kernel] refresh 2.6.39 patches
SVN-Revision: 29042
Florian Fainelli [Sun, 13 Nov 2011 19:19:05 +0000 (19:19 +0000)]
[brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
SVN-Revision: 29041
Florian Fainelli [Sun, 13 Nov 2011 18:41:26 +0000 (18:41 +0000)]
[rdc] fix typo, load ip17xx switch module
SVN-Revision: 29039
Gabor Juhos [Sun, 13 Nov 2011 17:36:36 +0000 (17:36 +0000)]
ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
Gabor Juhos [Sun, 13 Nov 2011 12:48:03 +0000 (12:48 +0000)]
ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
Gabor Juhos [Sun, 13 Nov 2011 12:48:01 +0000 (12:48 +0000)]
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
John Crispin [Sun, 13 Nov 2011 12:10:52 +0000 (12:10 +0000)]
madwifi: rename patch from ifxmips -> lantiq
SVN-Revision: 29020
John Crispin [Sun, 13 Nov 2011 12:09:34 +0000 (12:09 +0000)]
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
SVN-Revision: 29019
Jonas Gorski [Sun, 13 Nov 2011 11:45:09 +0000 (11:45 +0000)]
include/kernel.mk: don't check for modules.builtin on 2.6.32-
modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.
SVN-Revision: 29018
Gabor Juhos [Sun, 13 Nov 2011 11:27:04 +0000 (11:27 +0000)]
ar71xx: ag71xx: add support for getting switch port link status
SVN-Revision: 29017
Gabor Juhos [Sun, 13 Nov 2011 11:27:03 +0000 (11:27 +0000)]
ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
Gabor Juhos [Sun, 13 Nov 2011 11:27:01 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
SVN-Revision: 29015
Gabor Juhos [Sun, 13 Nov 2011 11:27:00 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
SVN-Revision: 29014
Gabor Juhos [Sun, 13 Nov 2011 11:26:59 +0000 (11:26 +0000)]
ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
Gabor Juhos [Sun, 13 Nov 2011 11:26:57 +0000 (11:26 +0000)]
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.
SVN-Revision: 29012
Gabor Juhos [Sun, 13 Nov 2011 11:26:56 +0000 (11:26 +0000)]
ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
Gabor Juhos [Sun, 13 Nov 2011 11:26:54 +0000 (11:26 +0000)]
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
Gabor Juhos [Sun, 13 Nov 2011 11:26:52 +0000 (11:26 +0000)]
ar71xx: fix occasional kernel hangs during boot on AR934x
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
SVN-Revision: 29009
Gabor Juhos [Sun, 13 Nov 2011 11:26:51 +0000 (11:26 +0000)]
ar71xx: refresh kernel patches
SVN-Revision: 29008
Jonas Gorski [Sun, 13 Nov 2011 10:48:05 +0000 (10:48 +0000)]
linux: update 3.1 to 3.1.1
SVN-Revision: 29007
John Crispin [Sat, 12 Nov 2011 23:40:21 +0000 (23:40 +0000)]
lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
John Crispin [Sat, 12 Nov 2011 23:40:16 +0000 (23:40 +0000)]
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
John Crispin [Sat, 12 Nov 2011 23:40:12 +0000 (23:40 +0000)]
lantiq: rename leds
SVN-Revision: 29002
John Crispin [Sat, 12 Nov 2011 23:40:07 +0000 (23:40 +0000)]
lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
John Crispin [Sat, 12 Nov 2011 23:40:01 +0000 (23:40 +0000)]
lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
John Crispin [Sat, 12 Nov 2011 23:39:56 +0000 (23:39 +0000)]
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
John Crispin [Sat, 12 Nov 2011 23:39:51 +0000 (23:39 +0000)]
lantiq: cleanup default package selection
SVN-Revision: 28998
John Crispin [Sat, 12 Nov 2011 18:41:15 +0000 (18:41 +0000)]
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
Gabor Juhos [Sat, 12 Nov 2011 14:09:52 +0000 (14:09 +0000)]
kernel: ar8216: add support for the AR8236 switch
SVN-Revision: 28993
Gabor Juhos [Sat, 12 Nov 2011 14:09:50 +0000 (14:09 +0000)]
kernel: ar8216: move port vlan setup into a separate function
SVN-Revision: 28992
Nicolas Thill [Sat, 12 Nov 2011 13:53:15 +0000 (13:53 +0000)]
package/base-files: enhance service functions
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
SVN-Revision: 28991
Gabor Juhos [Sat, 12 Nov 2011 12:50:20 +0000 (12:50 +0000)]
ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
Gabor Juhos [Sat, 12 Nov 2011 12:50:19 +0000 (12:50 +0000)]
ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
Gabor Juhos [Sat, 12 Nov 2011 12:50:18 +0000 (12:50 +0000)]
ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
Gabor Juhos [Sat, 12 Nov 2011 12:50:16 +0000 (12:50 +0000)]
ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
Gabor Juhos [Sat, 12 Nov 2011 12:09:59 +0000 (12:09 +0000)]
ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
Gabor Juhos [Sat, 12 Nov 2011 12:09:56 +0000 (12:09 +0000)]
ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
Gabor Juhos [Sat, 12 Nov 2011 12:09:54 +0000 (12:09 +0000)]
ar71xx: add a secondary mdio bus
SVN-Revision: 28984
Gabor Juhos [Sat, 12 Nov 2011 12:09:50 +0000 (12:09 +0000)]
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
Gabor Juhos [Sat, 12 Nov 2011 12:09:48 +0000 (12:09 +0000)]
ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
Gabor Juhos [Sat, 12 Nov 2011 12:09:42 +0000 (12:09 +0000)]
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
SVN-Revision: 28981
Gabor Juhos [Sat, 12 Nov 2011 10:54:20 +0000 (10:54 +0000)]
ar71xx: add AR934x specific USB setup
SVN-Revision: 28980
Gabor Juhos [Sat, 12 Nov 2011 10:54:18 +0000 (10:54 +0000)]
ar71xx: register the first ethernet interface on the DB120 board
SVN-Revision: 28979
Gabor Juhos [Sat, 12 Nov 2011 10:54:17 +0000 (10:54 +0000)]
ar71xx: allow to register ethernet interfaces for AR934X
SVN-Revision: 28978
Gabor Juhos [Sat, 12 Nov 2011 10:54:16 +0000 (10:54 +0000)]
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
SVN-Revision: 28977
Gabor Juhos [Sat, 12 Nov 2011 10:54:15 +0000 (10:54 +0000)]
ar71xx: add AR934X specific bootstrap and reset register bits
SVN-Revision: 28976
Gabor Juhos [Sat, 12 Nov 2011 10:54:10 +0000 (10:54 +0000)]
ar71xx: add diag support for the DB120 board
SVN-Revision: 28975
Gabor Juhos [Sat, 12 Nov 2011 10:54:09 +0000 (10:54 +0000)]
ar71xx: fix GPIO direction setup for AR934x
SVN-Revision: 28974
Gabor Juhos [Sat, 12 Nov 2011 10:54:08 +0000 (10:54 +0000)]
ar71xx: fix AR934X clock frequency calculation
SVN-Revision: 28973
Gabor Juhos [Sat, 12 Nov 2011 10:54:06 +0000 (10:54 +0000)]
package: add om2p-watchdog script
Based on a patch by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 28972
Gabor Juhos [Sat, 12 Nov 2011 10:54:04 +0000 (10:54 +0000)]
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28971
John Crispin [Fri, 11 Nov 2011 22:23:26 +0000 (22:23 +0000)]
pjsip: bump to 1.10 and improve ltq_tapi backend
SVN-Revision: 28963
John Crispin [Fri, 11 Nov 2011 21:59:11 +0000 (21:59 +0000)]
lantiq: improve falcon package selection
SVN-Revision: 28962
John Crispin [Fri, 11 Nov 2011 21:59:01 +0000 (21:59 +0000)]
lantiq: fix breakage introduced in 3.1 bump
SVN-Revision: 28961
Jo-Philipp Wich [Fri, 11 Nov 2011 13:25:31 +0000 (13:25 +0000)]
[package] base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again
SVN-Revision: 28943
Nicolas Thill [Fri, 11 Nov 2011 13:23:29 +0000 (13:23 +0000)]
package/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383)
SVN-Revision: 28942
John Crispin [Fri, 11 Nov 2011 09:06:49 +0000 (09:06 +0000)]
remove empty folder lqtapi
SVN-Revision: 28941
Jo-Philipp Wich [Thu, 10 Nov 2011 23:07:42 +0000 (23:07 +0000)]
[package] mac80211: add antenna control api for b43
SVN-Revision: 28940
Florian Fainelli [Thu, 10 Nov 2011 15:31:37 +0000 (15:31 +0000)]
[package] acx-mac80211: update to
20111030
Fixes build failures with Linux 3.1+
SVN-Revision: 28939
Imre Kaloz [Thu, 10 Nov 2011 13:39:06 +0000 (13:39 +0000)]
[base-files]: nuke another 2.4 skeleton
SVN-Revision: 28937
Imre Kaloz [Thu, 10 Nov 2011 12:55:01 +0000 (12:55 +0000)]
enable and use shadow passwords by default
SVN-Revision: 28936
Imre Kaloz [Thu, 10 Nov 2011 12:47:50 +0000 (12:47 +0000)]
[base-files]: the empty root password should be empty ;)
SVN-Revision: 28935
Jo-Philipp Wich [Thu, 10 Nov 2011 12:16:41 +0000 (12:16 +0000)]
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
SVN-Revision: 28933
Jonas Gorski [Wed, 9 Nov 2011 22:11:51 +0000 (22:11 +0000)]
package: kernel: fix typo
SVN-Revision: 28898
Jonas Gorski [Wed, 9 Nov 2011 21:16:52 +0000 (21:16 +0000)]
package: kernel: add handling for 3.2 renames (and some missed ones for 3.1)
SVN-Revision: 28897
Jonas Gorski [Wed, 9 Nov 2011 21:16:48 +0000 (21:16 +0000)]
package: mac80211: mark as broken for 3.2
SVN-Revision: 28896
Jonas Gorski [Wed, 9 Nov 2011 21:16:45 +0000 (21:16 +0000)]
package: acx: mark as broken for 3.2
SVN-Revision: 28895
Jonas Gorski [Wed, 9 Nov 2011 21:16:42 +0000 (21:16 +0000)]
package: madwifi: mark as broken for 3.2
SVN-Revision: 28894
Jonas Gorski [Wed, 9 Nov 2011 21:16:36 +0000 (21:16 +0000)]
target: linux: mtd: fix MTDREFRESH to an arbitrary high number
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.
Also make mtd use the in-kernel mtd headers.
SVN-Revision: 28893
Jo-Philipp Wich [Wed, 9 Nov 2011 18:55:28 +0000 (18:55 +0000)]
[package] uhttpd: cope with DES crypted passwd entries by not relying on a leading dollar sign to indicate a cipher
SVN-Revision: 28886
Nicolas Thill [Wed, 9 Nov 2011 17:32:23 +0000 (17:32 +0000)]
package/busybox: passwd: use MD5 hash by default (like it used to be)
SVN-Revision: 28885
Gabor Juhos [Wed, 9 Nov 2011 11:47:44 +0000 (11:47 +0000)]
pacakge/iw: don't show a stray ']' if the chain signal attribute list is empty
Without the patch, the output of 'station dump' command looks weird in
some cases:
root@OpenWrt:/# iw dev wlan0 station dump
Station 00:21:27:cb:57:02 (on wlan0)
inactive time: 190 ms
rx bytes: 36652
rx packets: 149
tx bytes: 1998
tx packets: 16
tx retries: 0
tx failed: 0
signal: -31 ] dBm
signal avg: -30 [-32, -36] dBm
tx bitrate: 5.5 MBit/s
rx bitrate: 54.0 MBit/s
root@OpenWrt:/#
SVN-Revision: 28879
Jo-Philipp Wich [Wed, 9 Nov 2011 11:10:37 +0000 (11:10 +0000)]
[package] firewall: add DHCPv6 default rule (#10381)
SVN-Revision: 28874
Nicolas Thill [Wed, 9 Nov 2011 00:23:58 +0000 (00:23 +0000)]
package/base-files: /lib/functions.sh: add {group,user}_{add,exists} functions
SVN-Revision: 28871
Nicolas Thill [Tue, 8 Nov 2011 23:35:13 +0000 (23:35 +0000)]
package/base-files: /lib/functions.sh: let service_stop exit early if no matching process to stop where found
SVN-Revision: 28870
Nicolas Thill [Tue, 8 Nov 2011 22:48:11 +0000 (22:48 +0000)]
package/relayd: use new service wrappers
SVN-Revision: 28869
Nicolas Thill [Tue, 8 Nov 2011 22:48:05 +0000 (22:48 +0000)]
package/ppp: use new service wrappers
SVN-Revision: 28868
Nicolas Thill [Tue, 8 Nov 2011 22:48:00 +0000 (22:48 +0000)]
package/linux-atm: use new service wrappers
SVN-Revision: 28867
Nicolas Thill [Tue, 8 Nov 2011 22:47:54 +0000 (22:47 +0000)]
package/base-files-network: use new service wrappers
SVN-Revision: 28866
projects / openwrt / svn-archive / archive.git / log