openwrt/svn-archive/archive.git
7 years agogcc: always explicitly link against libstdc++, fixes build errors on some hosts that...
Felix Fietkau [Thu, 12 Jan 2012 10:15:20 +0000 (10:15 +0000)]
gcc: always explicitly link against libstdc++, fixes build errors on some hosts that refuse to link it in implicitly (should fix #10587)

SVN-Revision: 29721

7 years agolibnl-tiny: fix a potential memleak in an error path
Felix Fietkau [Thu, 12 Jan 2012 10:15:18 +0000 (10:15 +0000)]
libnl-tiny: fix a potential memleak in an error path

SVN-Revision: 29720

7 years agoar8216: use vlan configuration for connecting ports (forced to be untagged) even...
Felix Fietkau [Thu, 12 Jan 2012 10:15:11 +0000 (10:15 +0000)]
ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured
this makes enable_vlan=0 practical for vlan passthrough

SVN-Revision: 29719

7 years agoar8216: do not strip vlan tags when running with vlan_enable=0
Felix Fietkau [Thu, 12 Jan 2012 10:15:08 +0000 (10:15 +0000)]
ar8216: do not strip vlan tags when running with vlan_enable=0

SVN-Revision: 29718

7 years agoar71xx: move irq_to_gpio and gpio_to_irq into gpio.c
Gabor Juhos [Wed, 11 Jan 2012 18:00:50 +0000 (18:00 +0000)]
ar71xx: move irq_to_gpio and gpio_to_irq into gpio.c

SVN-Revision: 29713

7 years ago[brcm63xx] Remove invalid LED GPIO from GW6200 board definition. GPIO 35 isn't inten...
Daniel Dickinson [Wed, 11 Jan 2012 13:47:48 +0000 (13:47 +0000)]
[brcm63xx] Remove invalid LED GPIO from GW6200 board definition.  GPIO 35 isn't intended to control ethernet LED (the led behaviour is a side effect) and using the gpio as an led causes kernel panics.

SVN-Revision: 29712

7 years agoar71xx: disable ath79 in order to get rid of Kconfig warnings
Gabor Juhos [Wed, 11 Jan 2012 09:14:19 +0000 (09:14 +0000)]
ar71xx: disable ath79 in order to get rid of Kconfig warnings

SVN-Revision: 29711

7 years agoar71xx: pb44_spi: add shutdown handler
Gabor Juhos [Wed, 11 Jan 2012 09:14:18 +0000 (09:14 +0000)]
ar71xx: pb44_spi: add shutdown handler

This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29710

7 years agoar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove
Gabor Juhos [Wed, 11 Jan 2012 09:14:17 +0000 (09:14 +0000)]
ar71xx: pb44_spi: call pb44_spi_{en,dis}able from probe/remove

SVN-Revision: 29709

7 years agoar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers
Gabor Juhos [Wed, 11 Jan 2012 09:14:15 +0000 (09:14 +0000)]
ar71xx: pb44_spi: introduce pb44_spi_{en,dis}able helpers

SVN-Revision: 29708

7 years agoar71xx: ar71xx_spi: add shutdown handler
Gabor Juhos [Wed, 11 Jan 2012 09:14:14 +0000 (09:14 +0000)]
ar71xx: ar71xx_spi: add shutdown handler

This allows to access the flash from a kexec'd kernel.

SVN-Revision: 29707

7 years agoar71xx: ar71xx_spi: save and restore regs from probe/remove
Gabor Juhos [Wed, 11 Jan 2012 09:14:13 +0000 (09:14 +0000)]
ar71xx: ar71xx_spi: save and restore regs from probe/remove

SVN-Revision: 29706

7 years agoar71xx: ar71xx_wdt: add shutdown handler
Gabor Juhos [Wed, 11 Jan 2012 09:14:11 +0000 (09:14 +0000)]
ar71xx: ar71xx_wdt: add shutdown handler

SVN-Revision: 29705

7 years ago[include] cmake.mk: fix passing of LDFLAGS
Jo-Philipp Wich [Mon, 9 Jan 2012 05:42:04 +0000 (05:42 +0000)]
[include] cmake.mk: fix passing of LDFLAGS

SVN-Revision: 29701

7 years ago[include] make prepare_kernel_conf target depend on quilt instead of sed. Preparing...
Jo-Philipp Wich [Sun, 8 Jan 2012 16:52:41 +0000 (16:52 +0000)]
[include] make prepare_kernel_conf target depend on quilt instead of sed. Preparing the source tree requires quilt and installing quilt implies installing sed.

SVN-Revision: 29697

7 years ago[scripts] metadata.pl: filter direct recursive depends like "select PACKAGE_kmod...
Jo-Philipp Wich [Sun, 8 Jan 2012 15:49:20 +0000 (15:49 +0000)]
[scripts] metadata.pl: filter direct recursive depends like "select PACKAGE_kmod-ipv6 if PACKAGE_kmod-ipv6"

SVN-Revision: 29695

7 years ago[package] pptp: remove support for underlying ipproto, it is adviced since a while...
Jo-Philipp Wich [Sun, 8 Jan 2012 15:41:34 +0000 (15:41 +0000)]
[package] pptp: remove support for underlying ipproto, it is adviced since a while that pptp should be declared as separate interface alognside wan - in this configuration the ipproto will cause stray udhcpc errors due to not existent interfaces, so remove it

SVN-Revision: 29694

7 years ago[package] cyassl: use patch-libtool pkg fixup
Jo-Philipp Wich [Sun, 8 Jan 2012 15:39:42 +0000 (15:39 +0000)]
[package] cyassl: use patch-libtool pkg fixup

SVN-Revision: 29693

7 years agozlib: fix duplicate function declarations for largefile support
Felix Fietkau [Sun, 8 Jan 2012 15:39:11 +0000 (15:39 +0000)]
zlib: fix duplicate function declarations for largefile support

SVN-Revision: 29690

7 years ago[toolchain] introduce a USE_EXTERNAL_LIBC symbol which gets selected by EXTERNAL_TOOL...
Jo-Philipp Wich [Sun, 8 Jan 2012 15:34:23 +0000 (15:34 +0000)]
[toolchain] introduce a USE_EXTERNAL_LIBC symbol which gets selected by EXTERNAL_TOOLCHAIN || NATIVE_TOOLCHAIN
Currently we always assume uClibc if an external toolchain is used, this breaks for non-uClibc toolchains or
even vanilla uClibc ones since they do not share the external librpc semantics as OpenWrt. Solve the problem
by defining an abstract "EXTERNAL_LIBC" which packages might or might not depend on.

SVN-Revision: 29689

7 years ago[package] base-files: implement a --force option for sysupgrade to override image...
Jo-Philipp Wich [Sun, 8 Jan 2012 15:30:37 +0000 (15:30 +0000)]
[package] base-files: implement a --force option for sysupgrade to override image checks, useful to upgrade old ar71xx installations to current trunk ones

SVN-Revision: 29688

7 years ago[package] firewall: add support for "local" port forwards which target an internal...
Jo-Philipp Wich [Sun, 8 Jan 2012 15:29:24 +0000 (15:29 +0000)]
[package] firewall: add support for "local" port forwards which target an internal address on the router itself

SVN-Revision: 29687

7 years agoinclude: calculate md5sum over sorted kernel config symbol list and incorperate it...
Jo-Philipp Wich [Sun, 8 Jan 2012 15:23:11 +0000 (15:23 +0000)]
include: calculate md5sum over sorted kernel config symbol list and incorperate it into the kernel metapackage version, make kmods depend on this specific version.
The aim of this change is to invalidate kmods which are built against a different kernel config on the opkg metadata level. Manual copying and insmod of custom
*.ko files, e.g. for development purpose, is still possible.

SVN-Revision: 29686

7 years agoath9k: merge a channel change fix from linux-wireless
Felix Fietkau [Sat, 7 Jan 2012 20:54:33 +0000 (20:54 +0000)]
ath9k: merge a channel change fix from linux-wireless

SVN-Revision: 29684

7 years agoar71xx: refresh patches
Gabor Juhos [Sat, 7 Jan 2012 19:36:43 +0000 (19:36 +0000)]
ar71xx: refresh patches

SVN-Revision: 29683

7 years agoar71xx: add a profile and build images for the TL-WR2543N/ND
Gabor Juhos [Sat, 7 Jan 2012 19:36:42 +0000 (19:36 +0000)]
ar71xx: add a profile and build images for the TL-WR2543N/ND

SVN-Revision: 29682

7 years agofirware-utils/mktplinkfw: add TL-WR2543N/ND support
Gabor Juhos [Sat, 7 Jan 2012 19:36:40 +0000 (19:36 +0000)]
firware-utils/mktplinkfw: add TL-WR2543N/ND support

SVN-Revision: 29681

7 years agoar71xx: add initial support for the TL-WR2543N/ND board
Gabor Juhos [Sat, 7 Jan 2012 19:36:35 +0000 (19:36 +0000)]
ar71xx: add initial support for the TL-WR2543N/ND board

The WLAN LEDs are not working yet.

SVN-Revision: 29680

7 years agoar71xx: allow to specify max read size for m25p80
Gabor Juhos [Sat, 7 Jan 2012 19:36:33 +0000 (19:36 +0000)]
ar71xx: allow to specify max read size for m25p80

Reading from the flash chip on the TL-WR2543ND seems buggy.
If the SPI flash driver tries to read too much data in one
SPI transfer, the flash chip returns bogus values. This can
be caused by a buggy flash chip on my board, or it can
be a bug in our SPI driver.

Add a workaround to the m25p80 driver until I find out the
root cause of the problem. The patch allows to specify the
maximum numner of bytes which can be read safely withint
one SPI transfer.

SVN-Revision: 29679

7 years agogeneric: add driver for the RTL8367R/M switches
Gabor Juhos [Sat, 7 Jan 2012 19:36:31 +0000 (19:36 +0000)]
generic: add driver for the RTL8367R/M switches

SVN-Revision: 29678

7 years agogeneric: rtl8366: preparing for RTL8367 support
Gabor Juhos [Sat, 7 Jan 2012 19:36:30 +0000 (19:36 +0000)]
generic: rtl8366: preparing for RTL8367 support

* make clock delay configurable
* make read,write commands configurable
* use u16 for member and untag fields

SVN-Revision: 29677

7 years agogeneric: rtl8366_smi: add timeout message
Gabor Juhos [Sat, 7 Jan 2012 19:36:25 +0000 (19:36 +0000)]
generic: rtl8366_smi: add timeout message

SVN-Revision: 29676

7 years agoar71xx: local mac support on the wndr3700
Gabor Juhos [Sat, 7 Jan 2012 17:24:44 +0000 (17:24 +0000)]
ar71xx: local mac support on the wndr3700

The wndr3700 at least has no eth0 mac address and usually leverages
the first wireless device's mac when in a bridged scenario. If,
however, you want to route, and not bridge the interfaces, you
need a unique mac address for it.

This patch sets the local bit on the mac address pulled from the
wireless chip and uses the resulting address for eth0.

Patch-by: Dave Taht <dave.taht@gmail.com>
SVN-Revision: 29675

7 years agogeneric: improve MIPS kexec support
Gabor Juhos [Sat, 7 Jan 2012 16:29:16 +0000 (16:29 +0000)]
generic: improve MIPS kexec support

It is based on patches from the linux-longsoon-community git tree:
http://dev.lemote.com/cgit/linux-loongson-community.git/

Now the kernel can use the command line parameter from kexec-tools.

Runtime tested on ar71xx with 2.6.39.4 (the wathdog must be stopped
before executing the new kernel). Compile tested with lantiq (3.1.4)
and brcm47xx (3.0.12).

SVN-Revision: 29674

7 years agoar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards
Gabor Juhos [Fri, 6 Jan 2012 15:54:59 +0000 (15:54 +0000)]
ar71xx: fix sysupgrade on the TL-WR841N/ND v7 boards

SVN-Revision: 29672

7 years ago[package] openssl: bump to v1.0.0f (CVE-2011-4108, CVE-2011-4576, CVE-2011-4577,...
Jo-Philipp Wich [Fri, 6 Jan 2012 15:18:30 +0000 (15:18 +0000)]
[package] openssl: bump to v1.0.0f (CVE-2011-4108, CVE-2011-4576, CVE-2011-4577, CVE-2011-4619, CVE-2012-0027)

SVN-Revision: 29670

7 years agoar71xx: add support for Redwave RW2458N
Gabor Juhos [Fri, 6 Jan 2012 07:20:59 +0000 (07:20 +0000)]
ar71xx: add support for Redwave RW2458N

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29669

7 years agoar71xx: fix RB-750 network configuration
Gabor Juhos [Fri, 6 Jan 2012 07:20:54 +0000 (07:20 +0000)]
ar71xx: fix RB-750 network configuration

SVN-Revision: 29668

7 years agoar71xx: fix sections mismatch warnings in the nand drivers
Gabor Juhos [Thu, 5 Jan 2012 18:08:33 +0000 (18:08 +0000)]
ar71xx: fix sections mismatch warnings in the nand drivers

SVN-Revision: 29667

7 years agoar71xx: fix LED configuration on the RB-750
Gabor Juhos [Thu, 5 Jan 2012 18:08:28 +0000 (18:08 +0000)]
ar71xx: fix LED configuration on the RB-750

SVN-Revision: 29666

7 years agopackage/kernel: add package for the PCF2123 RTC driver
Gabor Juhos [Wed, 4 Jan 2012 21:16:21 +0000 (21:16 +0000)]
package/kernel: add package for the PCF2123 RTC driver

SVN-Revision: 29664

7 years agoar71xx: create profile and build image for the ALFA AP96 board
Gabor Juhos [Wed, 4 Jan 2012 21:13:57 +0000 (21:13 +0000)]
ar71xx: create profile and build image for the ALFA AP96 board

SVN-Revision: 29663

7 years agoar71xx: add inital support for the ALFA Network AP96 board
Gabor Juhos [Wed, 4 Jan 2012 21:13:54 +0000 (21:13 +0000)]
ar71xx: add inital support for the ALFA Network AP96 board

The microSD slot and the Real Time Clock is not working yet.
The miniPCIe interface is not tested due to the lack of a
suitable card.

SVN-Revision: 29662

7 years agoar71xx: specify console kernel parameter for the Compex boards
Gabor Juhos [Wed, 4 Jan 2012 17:30:59 +0000 (17:30 +0000)]
ar71xx: specify console kernel parameter for the Compex boards

SVN-Revision: 29660

7 years agoar71xx: allow to use the command line hack on compex devices
Gabor Juhos [Wed, 4 Jan 2012 17:30:58 +0000 (17:30 +0000)]
ar71xx: allow to use the command line hack on compex devices

SVN-Revision: 29659

7 years agoar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7
Gabor Juhos [Wed, 4 Jan 2012 17:30:57 +0000 (17:30 +0000)]
ar71xx: use the TL-MR3x20 code for the TL-WR841N/ND v7

These models are based on the AP99 reference board,
and uses the AR7241 SoC.

SVN-Revision: 29658

7 years agoar71xx: show correct model name on TL-WA701N/ND boards
Gabor Juhos [Wed, 4 Jan 2012 17:30:55 +0000 (17:30 +0000)]
ar71xx: show correct model name on TL-WA701N/ND boards

SVN-Revision: 29657

7 years agoar71xx: add profile and build image for the TL-WA701N/ND boards
Gabor Juhos [Wed, 4 Jan 2012 17:30:54 +0000 (17:30 +0000)]
ar71xx: add profile and build image for the TL-WA701N/ND boards

SVN-Revision: 29656

7 years agofirmware-utils/mktplinkfw: add support for TL-WA701N/ND
Gabor Juhos [Wed, 4 Jan 2012 17:30:53 +0000 (17:30 +0000)]
firmware-utils/mktplinkfw: add support for TL-WA701N/ND

SVN-Revision: 29655

7 years agoar71xx: fix network configuration for the TL-WA901N/ND boards
Gabor Juhos [Wed, 4 Jan 2012 17:30:52 +0000 (17:30 +0000)]
ar71xx: fix network configuration for the TL-WA901N/ND boards

SVN-Revision: 29654

7 years agoar71xx: allow to use LAN LED on the TL-WA901N/ND boards
Gabor Juhos [Wed, 4 Jan 2012 17:30:50 +0000 (17:30 +0000)]
ar71xx: allow to use LAN LED on the TL-WA901N/ND boards

SVN-Revision: 29653

7 years agoar71xx: add default LED configuration for the TL-MR3020
Gabor Juhos [Wed, 4 Jan 2012 17:30:49 +0000 (17:30 +0000)]
ar71xx: add default LED configuration for the TL-MR3020

Also use the system LED for diagnostic.

SVN-Revision: 29652

7 years agoar71xx: add support for TP-Link TL-MR3020
Gabor Juhos [Wed, 4 Jan 2012 17:30:47 +0000 (17:30 +0000)]
ar71xx: add support for TP-Link TL-MR3020

This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29651

7 years agofirmware-utils/mktplinkfw: add support for TL-MR3020
Gabor Juhos [Wed, 4 Jan 2012 17:30:44 +0000 (17:30 +0000)]
firmware-utils/mktplinkfw: add support for TL-MR3020

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
SVN-Revision: 29650

7 years agopackage: remove the om2p-watchdog package
Gabor Juhos [Wed, 4 Jan 2012 17:30:42 +0000 (17:30 +0000)]
package: remove the om2p-watchdog package

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 29649

7 years agoar71xx: use the new om-watchdog package for OM2P
Gabor Juhos [Wed, 4 Jan 2012 17:30:41 +0000 (17:30 +0000)]
ar71xx: use the new om-watchdog package for OM2P

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 29648

7 years agopackage: add om-watchdog package
Gabor Juhos [Wed, 4 Jan 2012 17:30:39 +0000 (17:30 +0000)]
package: add om-watchdog package

om2p-watchdog package is OM2P specific. However a similar watchdog
mechanism exists on OM1P as well. This new package wants to substitute
om2p-watchdog with a new one which is suitable either for OM1P and OM2P.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 29647

7 years ago[toolchain] disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if BUILD_NL...
Jo-Philipp Wich [Wed, 4 Jan 2012 12:32:47 +0000 (12:32 +0000)]
[toolchain] disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if BUILD_NLS is on (#10735)

SVN-Revision: 29646

7 years agoadd CT target and TTL/HL match+target
Jo-Philipp Wich [Wed, 4 Jan 2012 02:52:54 +0000 (02:52 +0000)]
add CT target and TTL/HL match+target

This patch adds the CT target for conntrack (enables manipulation of
conntrack events and supercedes NOTRACK) as well as the TTL/HL target and
match.

SVN-Revision: 29645

7 years ago[netfilter] remove current RTSP support
Jo-Philipp Wich [Wed, 4 Jan 2012 00:29:29 +0000 (00:29 +0000)]
[netfilter] remove current RTSP support

SVN-Revision: 29643

7 years ago[generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affect...
Jo-Philipp Wich [Tue, 3 Jan 2012 23:08:15 +0000 (23:08 +0000)]
[generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802)
commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.

SVN-Revision: 29642

7 years agoar71xx: add profile and build factory image for the Hornet-UB board
Gabor Juhos [Sun, 1 Jan 2012 19:30:29 +0000 (19:30 +0000)]
ar71xx: add profile and build factory image for the Hornet-UB board

SVN-Revision: 29637

7 years agoar71xx: build images for the ALFA Network N2/N5 boards
Gabor Juhos [Sun, 1 Jan 2012 19:30:28 +0000 (19:30 +0000)]
ar71xx: build images for the ALFA Network N2/N5 boards

SVN-Revision: 29636

7 years agoar71xx: add support for the ALFA Network N2/N5 boards
Gabor Juhos [Sun, 1 Jan 2012 19:30:25 +0000 (19:30 +0000)]
ar71xx: add support for the ALFA Network N2/N5 boards

SVN-Revision: 29635

7 years ago[package] iwinfo: factor txpower offset into info display output, recompile if driver...
Jo-Philipp Wich [Sun, 1 Jan 2012 16:17:10 +0000 (16:17 +0000)]
[package] iwinfo: factor txpower offset into info display output, recompile if driver selection changes

SVN-Revision: 29634

7 years ago[toolchain] if CONFIG_BUILD_NLS is selected, compile uClibc with locale support
Jo-Philipp Wich [Sun, 1 Jan 2012 15:11:11 +0000 (15:11 +0000)]
[toolchain] if CONFIG_BUILD_NLS is selected, compile uClibc with locale support

SVN-Revision: 29633

7 years agoar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
Gabor Juhos [Sat, 31 Dec 2011 15:02:46 +0000 (15:02 +0000)]
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards

SVN-Revision: 29631

7 years agoar71xx: enable SWCONFIG_LEDS
Gabor Juhos [Sat, 31 Dec 2011 15:02:40 +0000 (15:02 +0000)]
ar71xx: enable SWCONFIG_LEDS

SVN-Revision: 29630

7 years agopackage/base-files: add support for the switch LED trigger
Gabor Juhos [Sat, 31 Dec 2011 15:02:35 +0000 (15:02 +0000)]
package/base-files: add support for the switch LED trigger

SVN-Revision: 29629

7 years agopackage/base-files: use case statement in led init script
Gabor Juhos [Sat, 31 Dec 2011 15:02:32 +0000 (15:02 +0000)]
package/base-files: use case statement in led init script

SVN-Revision: 29628

7 years agokernel: swconfig: introduce a generic switch LED trigger
Gabor Juhos [Sat, 31 Dec 2011 15:02:30 +0000 (15:02 +0000)]
kernel: swconfig: introduce a generic switch LED trigger

SVN-Revision: 29627

7 years agoar71xx: ag71xx: implement get_port_{link,stats} callbacks
Gabor Juhos [Sat, 31 Dec 2011 15:02:26 +0000 (15:02 +0000)]
ar71xx: ag71xx: implement get_port_{link,stats} callbacks

SVN-Revision: 29626

7 years agokernel: swconfig: add get_port_{link,stats} callbacks
Gabor Juhos [Sat, 31 Dec 2011 15:02:24 +0000 (15:02 +0000)]
kernel: swconfig: add get_port_{link,stats} callbacks

SVN-Revision: 29625

7 years agoar71xx: fix LEDs on the WRT400N
Gabor Juhos [Sat, 31 Dec 2011 13:54:11 +0000 (13:54 +0000)]
ar71xx: fix LEDs on the WRT400N

SVN-Revision: 29624

7 years agoramips: rt288x: add support for the Belkin F5D8235-4 v1 board
Gabor Juhos [Wed, 28 Dec 2011 08:43:43 +0000 (08:43 +0000)]
ramips: rt288x: add support for the Belkin F5D8235-4 v1 board

Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 29617

7 years agoramips: rt288x: change base address and window size of flash bank 0
Gabor Juhos [Wed, 28 Dec 2011 08:43:36 +0000 (08:43 +0000)]
ramips: rt288x: change base address and window size of flash bank 0

SVN-Revision: 29616

7 years agoramips: rt305x: add support for the ALFA Networks W502U (R36) board
Gabor Juhos [Wed, 28 Dec 2011 08:43:32 +0000 (08:43 +0000)]
ramips: rt305x: add support for the ALFA Networks W502U (R36) board

SVN-Revision: 29615

7 years agoar71xx: enable sysupgrade support for airrouter
Gabor Juhos [Tue, 27 Dec 2011 16:59:43 +0000 (16:59 +0000)]
ar71xx: enable sysupgrade support for airrouter

Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 29614

7 years agoar71xx: fix sysupgrade on PB42/PB44 boards
Gabor Juhos [Tue, 27 Dec 2011 16:57:01 +0000 (16:57 +0000)]
ar71xx: fix sysupgrade on PB42/PB44 boards

SVN-Revision: 29613

7 years agoramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
Gabor Juhos [Tue, 27 Dec 2011 16:56:30 +0000 (16:56 +0000)]
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board

SVN-Revision: 29612

7 years ago[package] add usbreset - a small simple utility to send port rests to selected usb...
Jo-Philipp Wich [Sun, 25 Dec 2011 13:59:17 +0000 (13:59 +0000)]
[package] add usbreset - a small simple utility to send port rests to selected usb devices (#10394)

SVN-Revision: 29611

7 years ago[generic] add missing config symbol
Jo-Philipp Wich [Sun, 25 Dec 2011 13:33:18 +0000 (13:33 +0000)]
[generic] add missing config symbol

SVN-Revision: 29610

7 years ago[netfilter] package CT target
Jo-Philipp Wich [Sun, 25 Dec 2011 13:32:53 +0000 (13:32 +0000)]
[netfilter] package CT target

SVN-Revision: 29609

7 years agomac80211: clean up init, remove some redundant checks, fix tx power init (#10113)
Felix Fietkau [Fri, 23 Dec 2011 19:24:38 +0000 (19:24 +0000)]
mac80211: clean up init, remove some redundant checks, fix tx power init (#10113)

SVN-Revision: 29606

7 years agobrcm47xx: fix usb on more recent bcma based devices.
Hauke Mehrtens [Fri, 23 Dec 2011 17:21:52 +0000 (17:21 +0000)]
brcm47xx: fix usb on more recent bcma based devices.

SVN-Revision: 29605

7 years agoramips: initial support for Sitecom WL-351 v1 002
Gabor Juhos [Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)]
ramips: initial support for Sitecom WL-351 v1 002

This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 29604

7 years agoramips: add support for the Senao/EnGenius ESR-9753 board
Gabor Juhos [Fri, 23 Dec 2011 14:27:10 +0000 (14:27 +0000)]
ramips: add support for the Senao/EnGenius ESR-9753 board

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
SVN-Revision: 29603

7 years agoramips: define firmware partition for Omnima MiniEMBWiFi
Gabor Juhos [Fri, 23 Dec 2011 14:27:05 +0000 (14:27 +0000)]
ramips: define firmware partition for Omnima MiniEMBWiFi

Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
SVN-Revision: 29602

7 years agokernel: enable magic sysrq by default, it does not add much to the kernel image size...
Felix Fietkau [Thu, 22 Dec 2011 08:45:13 +0000 (08:45 +0000)]
kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes

SVN-Revision: 29600

7 years agoar71xx: set a reserved bit that resets to 1 when writing the address table control...
Felix Fietkau [Thu, 22 Dec 2011 05:43:53 +0000 (05:43 +0000)]
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)

SVN-Revision: 29598

7 years agoar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Jonas Gorski [Wed, 21 Dec 2011 19:32:40 +0000 (19:32 +0000)]
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H

Thanks netprince for reporting and testing.

SVN-Revision: 29595

7 years ago[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of...
Jo-Philipp Wich [Wed, 21 Dec 2011 01:27:48 +0000 (01:27 +0000)]
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)

SVN-Revision: 29593

7 years ago[package] base-files: add -b (--create-backup) option to sysupgrade, which generates...
Jo-Philipp Wich [Tue, 20 Dec 2011 17:25:15 +0000 (17:25 +0000)]
[package] base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.

SVN-Revision: 29587

7 years ago[package] firewall:
Jo-Philipp Wich [Tue, 20 Dec 2011 01:10:15 +0000 (01:10 +0000)]
[package] firewall:
- introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them
- annotate default traffic rules with names
- bump version

SVN-Revision: 29577

7 years agobrcm47xx: remove patch starting adding brcm4716 to ssb
Hauke Mehrtens [Mon, 19 Dec 2011 23:55:20 +0000 (23:55 +0000)]
brcm47xx: remove patch starting adding brcm4716 to ssb

brcm4716 is supported by bcma now we do not need this patch

SVN-Revision: 29576

7 years agobrcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
Hauke Mehrtens [Mon, 19 Dec 2011 23:39:13 +0000 (23:39 +0000)]
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.

This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

SVN-Revision: 29575

7 years agokernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
Hauke Mehrtens [Mon, 19 Dec 2011 23:33:03 +0000 (23:33 +0000)]
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing

SVN-Revision: 29574

7 years agobrcm47xx: remove support for kernel 2.6.39
Hauke Mehrtens [Mon, 19 Dec 2011 23:26:15 +0000 (23:26 +0000)]
brcm47xx: remove support for kernel 2.6.39

There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

SVN-Revision: 29573

7 years agomac80211: deactivate mac80211 tracing
Hauke Mehrtens [Mon, 19 Dec 2011 23:23:34 +0000 (23:23 +0000)]
mac80211: deactivate mac80211 tracing

Activating tracing on kernel <= 2.6.32 causes build errors.

SVN-Revision: 29572

7 years agoath9k: fix another tx locking issue
Felix Fietkau [Mon, 19 Dec 2011 15:51:20 +0000 (15:51 +0000)]
ath9k: fix another tx locking issue

SVN-Revision: 29570