openwrt/svn-archive/archive.git
4 years agoRevert "ncurses: cleanup InstallDev"
Felix Fietkau [Thu, 23 Apr 2015 11:06:15 +0000 (11:06 +0000)]
Revert "ncurses: cleanup InstallDev"

This reverts r43204. The symlinks are faulty, as they point to a
temporary staging dir

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45569

4 years agopackage-ipkg.mk: fix typo (patch from #19540)
Felix Fietkau [Thu, 23 Apr 2015 08:27:22 +0000 (08:27 +0000)]
package-ipkg.mk: fix typo (patch from #19540)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45568

4 years agohostapd: backport fix for CVE-2015-1863, refresh patches
Felix Fietkau [Thu, 23 Apr 2015 08:01:51 +0000 (08:01 +0000)]
hostapd: backport fix for CVE-2015-1863, refresh patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45567

4 years agonvram: increase NVRAM size to 64 KiB
Rafał Miłecki [Wed, 22 Apr 2015 19:07:24 +0000 (19:07 +0000)]
nvram: increase NVRAM size to 64 KiB

For years Broadcom devices use 64 KiB NVRAM partition size and some of
them indeed have it filled in more than 50%. This change allows handling
whole NVRAM e.g. on Netgear WNDR4500 and Netgear R8000.

The same fix was applied to kernel in upstream commit 6ab7c29.

Reported-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45566

4 years agonvram: refuse to open NVRAM for writing if it's too big to be handled
Rafał Miłecki [Wed, 22 Apr 2015 19:07:19 +0000 (19:07 +0000)]
nvram: refuse to open NVRAM for writing if it's too big to be handled

Otherwise writing anything will result in loosing data.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45565

4 years agonvram: drop check for WGT634U using /proc/diag/model
Rafał Miłecki [Wed, 22 Apr 2015 19:07:12 +0000 (19:07 +0000)]
nvram: drop check for WGT634U using /proc/diag/model

We don't have broadcom-diag for months or years now and the correct
solution is to simply don't have "nvram" partition on WGT634U anyway.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45564

4 years agonvram: use correct variable name for MTD partition size
Rafał Miłecki [Wed, 22 Apr 2015 19:07:06 +0000 (19:07 +0000)]
nvram: use correct variable name for MTD partition size

Sytax of /proc/mtd is following:
dev:    size   erasesize  name
which means that sscanf "mtd%d: %08x" reads size, not erasesize.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45563

4 years agonvram: drop support for ancient /dev/mtdblock/%d
Rafał Miłecki [Wed, 22 Apr 2015 19:06:58 +0000 (19:06 +0000)]
nvram: drop support for ancient /dev/mtdblock/%d

Path /dev/mtdblock%d is used for years now.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45562

4 years agohostapd: mark wpa-supplicant & wpad-mesh as broken on uml
Nicolas Thill [Wed, 22 Apr 2015 15:36:00 +0000 (15:36 +0000)]
hostapd: mark wpa-supplicant & wpad-mesh as broken on uml

Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 45561

4 years agomwlwifi: upgrade to the latest revision
Imre Kaloz [Wed, 22 Apr 2015 09:57:32 +0000 (09:57 +0000)]
mwlwifi: upgrade to the latest revision

New revision adds transmit frame rate info

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45560

4 years agogeneric/4.0: bump to final version
Imre Kaloz [Wed, 22 Apr 2015 09:35:36 +0000 (09:35 +0000)]
generic/4.0: bump to final version

Linux 4.0 was released on 2014-04-12

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45559

4 years agobrcm63xx: fix leds bcm963269bhr
Jonas Gorski [Tue, 21 Apr 2015 17:00:39 +0000 (17:00 +0000)]
brcm63xx: fix leds bcm963269bhr

Fix the led naming and gpios.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45558

4 years agobrcm63xx: add missing bcm96329bhr profile and dts
Jonas Gorski [Tue, 21 Apr 2015 16:43:46 +0000 (16:43 +0000)]
brcm63xx: add missing bcm96329bhr profile and dts

Hopefully the last missing board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45557

4 years agouqmi: auto retry when bringup fails
John Crispin [Tue, 21 Apr 2015 13:18:46 +0000 (13:18 +0000)]
uqmi: auto retry when bringup fails

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45556

4 years agoumbim: auto retry when bringup fails
John Crispin [Tue, 21 Apr 2015 13:18:40 +0000 (13:18 +0000)]
umbim: auto retry when bringup fails

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45555

4 years agoralink: the systick clocksource was calculating a bad bogo mips value
John Crispin [Tue, 21 Apr 2015 12:42:42 +0000 (12:42 +0000)]
ralink: the systick clocksource was calculating a bad bogo mips value

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45554

4 years agoAdd support for Ubiquiti Rocket M XW devices
John Crispin [Tue, 21 Apr 2015 12:42:13 +0000 (12:42 +0000)]
Add support for Ubiquiti Rocket M XW devices

This patch adds support for the XW version of the Rocket M series devices
manufactured by Ubiquiti, based on the Atheros AR9342 SoC.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
SVN-Revision: 45553

4 years agoar71xx: spi cleanup for ap121, db120, ubnt-xm and ap136
John Crispin [Tue, 21 Apr 2015 12:42:05 +0000 (12:42 +0000)]
ar71xx: spi cleanup for ap121, db120, ubnt-xm and ap136

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45552

4 years agoar71xx: merge ap81 patches into one
John Crispin [Tue, 21 Apr 2015 12:41:55 +0000 (12:41 +0000)]
ar71xx: merge ap81 patches into one

Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45551

4 years agonetifd: update to the latest version, fixes retry when proto handlers exit without...
Felix Fietkau [Tue, 21 Apr 2015 12:11:07 +0000 (12:11 +0000)]
netifd: update to the latest version, fixes retry when proto handlers exit without changing the state

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45550

4 years agomt76: remove specific firmware versions from makefile
Felix Fietkau [Tue, 21 Apr 2015 12:10:44 +0000 (12:10 +0000)]
mt76: remove specific firmware versions from makefile

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45549

4 years agokernel: backport an upstream PPPoE shutdown fix
Felix Fietkau [Tue, 21 Apr 2015 11:24:46 +0000 (11:24 +0000)]
kernel: backport an upstream PPPoE shutdown fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45548

4 years agobcm53xx: sysupgrade: check if new kernel fits partition size
Rafał Miłecki [Tue, 21 Apr 2015 11:21:34 +0000 (11:21 +0000)]
bcm53xx: sysupgrade: check if new kernel fits partition size

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45547

4 years agobcm53xx: sysupgrade: improve NAND warnings
Rafał Miłecki [Tue, 21 Apr 2015 11:04:38 +0000 (11:04 +0000)]
bcm53xx: sysupgrade: improve NAND warnings

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45546

4 years agobcm53xx: image: prepare for generating serial flash images
Rafał Miłecki [Tue, 21 Apr 2015 08:42:41 +0000 (08:42 +0000)]
bcm53xx: image: prepare for generating serial flash images

There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45545

4 years agobcm53xx: sysupgrade: drop some debugging message
Rafał Miłecki [Tue, 21 Apr 2015 08:34:25 +0000 (08:34 +0000)]
bcm53xx: sysupgrade: drop some debugging message

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45544

4 years agobcm53xx: sysupgrade: allow flashing NAND devices without --force
Rafał Miłecki [Tue, 21 Apr 2015 08:32:59 +0000 (08:32 +0000)]
bcm53xx: sysupgrade: allow flashing NAND devices without --force

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45543

4 years agobcm53xx: sysupgrade: support flashing TRX with UBI image
Rafał Miłecki [Tue, 21 Apr 2015 08:20:06 +0000 (08:20 +0000)]
bcm53xx: sysupgrade: support flashing TRX with UBI image

Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45542

4 years agobcm53xx: append only 1 block (with erasing mark) to UBI
Rafał Miłecki [Tue, 21 Apr 2015 08:20:00 +0000 (08:20 +0000)]
bcm53xx: append only 1 block (with erasing mark) to UBI

This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.

Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45541

4 years agobcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
Rafał Miłecki [Tue, 21 Apr 2015 08:19:53 +0000 (08:19 +0000)]
bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades

Signed-off-by: Dan Haab <dhaab@luxul.com>
SVN-Revision: 45540

4 years agoodhcpd: minor fixes
Steven Barth [Tue, 21 Apr 2015 07:45:49 +0000 (07:45 +0000)]
odhcpd: minor fixes

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45539

4 years agoar71xx: add TP-LINK TL-WR710N v2
John Crispin [Tue, 21 Apr 2015 07:15:55 +0000 (07:15 +0000)]
ar71xx: add TP-LINK TL-WR710N v2

TP-Link TL-WR710n v2 looks like v1, but has less memory (4MB).

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 45538

4 years agoipq806x: add db149 support to OpenWrt init scripts
John Crispin [Tue, 21 Apr 2015 07:15:47 +0000 (07:15 +0000)]
ipq806x: add db149 support to OpenWrt init scripts

DB149 is a IPQ8064 based platform. This patch adds the init scripts to
detect it, configure the network accordingly, and generate a flashable
image for it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45537

4 years agoipq806x: add db149 dts files
John Crispin [Tue, 21 Apr 2015 07:15:37 +0000 (07:15 +0000)]
ipq806x: add db149 dts files

DB149 is an IPQ806x based development platform. This patch adds the dts
files to support it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45536

4 years agoipq806x: enable AT803x driver
John Crispin [Tue, 21 Apr 2015 07:15:30 +0000 (07:15 +0000)]
ipq806x: enable AT803x driver

Certain IPQ806x based platforms are making use of this PHY. So we'll
enable it so it gets detected as such.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45535

4 years agokernel: remove module checks for 3.15/3.16/3.17
John Crispin [Tue, 21 Apr 2015 06:59:41 +0000 (06:59 +0000)]
kernel: remove module checks for 3.15/3.16/3.17

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45534

4 years agokernel: remove usb-serial-motorola-phone
John Crispin [Tue, 21 Apr 2015 06:59:35 +0000 (06:59 +0000)]
kernel: remove usb-serial-motorola-phone

replaced by usb-serial-simple (see r45233)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45533

4 years agowpan: remove duplicate DEPENDS
John Crispin [Tue, 21 Apr 2015 06:59:29 +0000 (06:59 +0000)]
wpan: remove duplicate DEPENDS

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45532

4 years agokernel: add bluetooth symbols from Kernel 4.0
John Crispin [Tue, 21 Apr 2015 06:59:23 +0000 (06:59 +0000)]
kernel: add bluetooth symbols from Kernel 4.0

upstream commit: Bluetooth: Introduce BT_BREDR and BT_LE config options
id: 65efd2bf4885312b42de9829159789199221cc60

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45531

4 years agokernel: fix generic/3.18 wpan symbols
John Crispin [Tue, 21 Apr 2015 06:59:18 +0000 (06:59 +0000)]
kernel: fix generic/3.18 wpan symbols

-removed symbol because it should be handled by wpan.mk
-add missing FAKEHARD symbol (this symbol is removed in Kernel 4.0)

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45530

4 years agowpan: rework bluetooth / wpan and 6lowpan dependencies
John Crispin [Tue, 21 Apr 2015 06:59:10 +0000 (06:59 +0000)]
wpan: rework bluetooth / wpan and 6lowpan dependencies

- remove/rename of 6lowpan-iphc
upstream change in 3.17: 6lowpan: introduce new net/6lowpan directory
id: 2c6bed7cfcd3f594ed9e4d6919fa2ebea2243d19

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45529

4 years agoar71xx: refresh patches
Luka Perkov [Mon, 20 Apr 2015 20:47:53 +0000 (20:47 +0000)]
ar71xx: refresh patches

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45528

4 years agoar71xx: add support for compex wpj344
Luka Perkov [Mon, 20 Apr 2015 20:47:48 +0000 (20:47 +0000)]
ar71xx: add support for compex wpj344

Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45527

4 years agonettle: bump to 3.1
Steven Barth [Mon, 20 Apr 2015 20:47:42 +0000 (20:47 +0000)]
nettle: bump to 3.1

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45526

4 years agobinutils/oprofile: disable mips16 to fix build errors (#19522)
Felix Fietkau [Mon, 20 Apr 2015 15:01:21 +0000 (15:01 +0000)]
binutils/oprofile: disable mips16 to fix build errors (#19522)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45525

4 years agoar71xx: Increase RXD/RDV to 2 on OM5P-AN
Felix Fietkau [Mon, 20 Apr 2015 15:01:00 +0000 (15:01 +0000)]
ar71xx: Increase RXD/RDV to 2 on OM5P-AN

It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV
but 2. These was found when testing with a NetGear GS752TP POE switch with a
cable length of 50ft and 250ft.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45524

4 years agoar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x
Felix Fietkau [Mon, 20 Apr 2015 15:00:52 +0000 (15:00 +0000)]
ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934x

The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared
by the function ath79_setup_ar934x_eth_cfg. Clearing these in the
ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they
rely on the preset value by the bootloader.

Instead another function is introduced which also works on ETH_CFG on AR934x.
It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on
machines which require special settings.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45523

4 years agoar71xx: add mask and shift for RXD/RDV bits in AR934X register file
Felix Fietkau [Mon, 20 Apr 2015 15:00:41 +0000 (15:00 +0000)]
ar71xx: add mask and shift for RXD/RDV bits in AR934X register file

The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X
register file") introduced definitions for some bits in the RDV/RXD part of the
ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is
specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit
only specified the lower bits. The upper bits also have to be unset when the
lower bits should only be set.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45522

4 years agoar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN
Felix Fietkau [Mon, 20 Apr 2015 15:00:20 +0000 (15:00 +0000)]
ar71xx: Remove TX/RX delay from pll_1000 for OM5P-AN

The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the
enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY.
Othwise the throughput in gigabit mode is heavily reduced.

Signed-off-by: Sven Eckelmann <sven@open-mesh.org>
SVN-Revision: 45521

4 years agomac80211: fallback to wpa_supplicant to setup encrypted mesh
Felix Fietkau [Mon, 20 Apr 2015 15:00:13 +0000 (15:00 +0000)]
mac80211: fallback to wpa_supplicant to setup encrypted mesh

instead of failing when authsae is not installed, also try using
wpa_supplicant as the newly added -mesh variants support mesh mode
and SAE encryption.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45520

4 years agohostapd/netifd: encrypted mesh with wpa_supplicant
Felix Fietkau [Mon, 20 Apr 2015 15:00:07 +0000 (15:00 +0000)]
hostapd/netifd: encrypted mesh with wpa_supplicant

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45519

4 years agotools: drop unused genext2fs
Jo-Philipp Wich [Mon, 20 Apr 2015 13:58:22 +0000 (13:58 +0000)]
tools: drop unused genext2fs

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45518

4 years agoall: replace genext2fs with make_ext4fs
Jo-Philipp Wich [Mon, 20 Apr 2015 13:57:43 +0000 (13:57 +0000)]
all: replace genext2fs with make_ext4fs

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45517

4 years agonetfilter.mk: remove obsolete ip_nat_ftp related line
Felix Fietkau [Mon, 20 Apr 2015 13:36:25 +0000 (13:36 +0000)]
netfilter.mk: remove obsolete ip_nat_ftp related line

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45516

4 years agonetfilter.mk: move IRC conntrack/nat helpers to kmod-nf-nathelper-extra
Felix Fietkau [Mon, 20 Apr 2015 13:36:02 +0000 (13:36 +0000)]
netfilter.mk: move IRC conntrack/nat helpers to kmod-nf-nathelper-extra

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45515

4 years agoodhcp6c: fix SOL_MAX_RT to match RFC 3315
Steven Barth [Mon, 20 Apr 2015 09:17:13 +0000 (09:17 +0000)]
odhcp6c: fix SOL_MAX_RT to match RFC 3315

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45514

4 years agonftables: bump version
Steven Barth [Mon, 20 Apr 2015 06:30:34 +0000 (06:30 +0000)]
nftables: bump version

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45513

4 years agoiproute2: update to v4.0.0
Steven Barth [Mon, 20 Apr 2015 06:26:09 +0000 (06:26 +0000)]
iproute2: update to v4.0.0

The most significant change from the previous version is the trimming of
the 300-ip_tiny.patch to lib/utils.c where a section previously patched
had vanished.  That section of the patch was removed.

Built and lightly tested on ar71xx against uClibc and musl.

Signed-off-by: Russell Senior <russell@personaltelco.net>
SVN-Revision: 45512

4 years agoRevert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)
Felix Fietkau [Sun, 19 Apr 2015 19:19:12 +0000 (19:19 +0000)]
Revert "ar71xx/image: move TPLINK-LZMA image to new build code" (r45490)

Profile definitions need to be checked and fixed before this patch can
be applied again.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45511

4 years agolibnl-tiny: link library with -Bsymbolic-functions
Felix Fietkau [Sun, 19 Apr 2015 18:33:19 +0000 (18:33 +0000)]
libnl-tiny: link library with -Bsymbolic-functions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45510

4 years agolua: link library with -Bsymbolic-functions
Felix Fietkau [Sun, 19 Apr 2015 18:33:13 +0000 (18:33 +0000)]
lua: link library with -Bsymbolic-functions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45509

4 years agocmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly...
Felix Fietkau [Sun, 19 Apr 2015 18:33:07 +0000 (18:33 +0000)]
cmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly improves performance and compression

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45508

4 years agoramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout
Felix Fietkau [Sun, 19 Apr 2015 16:31:54 +0000 (16:31 +0000)]
ramips: switch WSR-1166 and WSR-600 to single-firmware mtd layout

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45507

4 years agokernel: refresh generic patches
Jonas Gorski [Sun, 19 Apr 2015 11:38:46 +0000 (11:38 +0000)]
kernel: refresh generic patches

Refresh patches to remove the trailing whitespaces caused by an old
diffutils version on osx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45506

4 years agobrcm63xx: fix bcm63268 rgmii port rgmii configuration
Jonas Gorski [Sun, 19 Apr 2015 11:38:42 +0000 (11:38 +0000)]
brcm63xx: fix bcm63268 rgmii port rgmii configuration

This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.

Fixes e.g. GbE ports on BCM963268BU_P300.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45505

4 years agobrcm63xx: allow using all four rgmii ports on bcm6316x
Jonas Gorski [Sun, 19 Apr 2015 11:38:24 +0000 (11:38 +0000)]
brcm63xx: allow using all four rgmii ports on bcm6316x

At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45504

4 years agonetifd: update to the latest version, fixes more interface device config handling...
Felix Fietkau [Sun, 19 Apr 2015 09:50:49 +0000 (09:50 +0000)]
netifd: update to the latest version, fixes more interface device config handling issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45503

4 years agobrcm63xx: BCM963268BU_P300 reference board fixes
Jonas Gorski [Sat, 18 Apr 2015 22:33:50 +0000 (22:33 +0000)]
brcm63xx: BCM963268BU_P300 reference board fixes

- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45499

4 years agoimage.mk: do not emit multiple target definitions for kernel images
Felix Fietkau [Sat, 18 Apr 2015 21:35:22 +0000 (21:35 +0000)]
image.mk: do not emit multiple target definitions for kernel images

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45498

4 years agonetifd: update to the latest version, fixes more device config handling issues
Felix Fietkau [Sat, 18 Apr 2015 21:35:16 +0000 (21:35 +0000)]
netifd: update to the latest version, fixes more device config handling issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45497

4 years agobase-files: make the generic sysinfo script run earlier to allow the mount_root scrip...
Felix Fietkau [Sat, 18 Apr 2015 20:14:38 +0000 (20:14 +0000)]
base-files: make the generic sysinfo script run earlier to allow the mount_root script to pick up the board name

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45496

4 years agoimage.mk: force rebuild of kernel dependent parts - fixes auto-rebuild on DTS changes
Felix Fietkau [Sat, 18 Apr 2015 19:32:20 +0000 (19:32 +0000)]
image.mk: force rebuild of kernel dependent parts - fixes auto-rebuild on DTS changes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45495

4 years agoiptables: remove obsolete files
Felix Fietkau [Sat, 18 Apr 2015 17:59:31 +0000 (17:59 +0000)]
iptables: remove obsolete files

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45494

4 years agodropbear: update to 2015.67
Steven Barth [Sat, 18 Apr 2015 11:25:01 +0000 (11:25 +0000)]
dropbear: update to 2015.67

fixes dbclient login into OpenSSH 6.8p1
error: "Bad hostkey signature"

reported on irc, replicated with Arch Linux

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45493

4 years agohostapd: Fix wps button hotplug script to handle multiple radios
John Crispin [Sat, 18 Apr 2015 10:19:37 +0000 (10:19 +0000)]
hostapd: Fix wps button hotplug script to handle multiple radios

Hostapd's control file location was changed in 2013, and that has apparently
broken the wps button hotplug script in cases where there are multiple radios
and wps is possibly configured also for the second radio. The current wps
button hotplug script always handles only the first radio.

https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh

The reason is that the button hotplug script seeks directories like
/var/run/hostapd*, as the hostapd-phy0.conf files were earlier in
per-interface subdirectories.

Currently the *.conf files are directly in /var/run and the control sockets
are in /var/run/hostapd, but there is no subdirectory for each radio.

root@OpenWrt:/# ls /var/run/hostapd*
/var/run/hostapd-phy0.conf  /var/run/hostapd-phy1.conf

/var/run/hostapd:
wlan0  wlan1

The hotplug script was attempted to be fixed after the hostapd change by
r38986 in Dec2013, but that change only unbroke the script for the first
radio, but left it broken for multiple radios.
https://dev.openwrt.org/changeset/38986/

The script fails to find subdirectories with [ -d "$dir" ], and passes just
the only found directory /var/run/hostapd, leading into activating only the
first radio, as hostapd_cli defaults to first socket found inthe passed
directory:
root@OpenWrt:/# hostapd_cli -?
...
usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \
                    [-G<ping interval>] [command..]
...
    -p<path>     path to find control sockets (default: /var/run/hostapd)
...
    -i<ifname>   Interface to listen on (default: first interface found in the
                 socket path)

Below is a run with the default script and with my proposed solution.

Default script (with logging added):
==================================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh

if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
         for dir in /var/run/hostapd*; do
                 [ -d "$dir" ] || continue
                 logger "WPS activated for: $dir"
                 hostapd_cli -p "$dir" wps_pbc
         done
fi

 >>>> WPS BUTTON PRESSED <<<<<

root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Timed-out
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd

wlan0 got WPS activated, while wlan1 remained inactive.

I have modified the script to search for sockets instead of directories and
to use the "-i" option with hostapd_cli, and now the script properly
activates wps for both radios. As "-i" needs the interface name instead of
the full path, the script first changes dir to /var/run/hostapd to get simply
the interface names.

Modified script (with logging):
===============================
root@OpenWrt:/# cat /etc/rc.button/wps
#!/bin/sh

if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
         cd /var/run/hostapd
         for dir in *; do
                 [ -S "$socket" ] || continue
                 logger "WPS activated for: $socket"
                 hostapd_cli -i "$socket" wps_pbc
         done
fi

 >>>> WPS BUTTON PRESSED <<<<<

root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status
PBC Status: Active
Last WPS result: None
root@OpenWrt:/# logread | grep WPS
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0
Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1

Both radios got their WPS activated properly.

I am not sure if my solution is optimal, but it seems to work. WPS button is
maybe not that often used functionality, but it might be fixed in any case.
Routers with multiple radios are common now, so the bug is maybe more
prominent than earlier.

The modified script has been in a slightly different format in my community
build since r42420 in September 2014.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45492

4 years agoar71xx/image: remove duplicated rootfs in new tplink initramfs images
John Crispin [Sat, 18 Apr 2015 10:19:28 +0000 (10:19 +0000)]
ar71xx/image: remove duplicated rootfs in new tplink initramfs images

The new building code included the rootfs twice when building tplink initramfs images.
To make it more readable move initramfs into an own build step
Build/mktplinkfw-initramfs.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45491

4 years agoar71xx/image: move TPLINK-LZMA image to new build code
John Crispin [Sat, 18 Apr 2015 10:19:23 +0000 (10:19 +0000)]
ar71xx/image: move TPLINK-LZMA image to new build code

There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45490

4 years agoar71xx/image: add template tplink-16mlzma
John Crispin [Sat, 18 Apr 2015 10:19:14 +0000 (10:19 +0000)]
ar71xx/image: add template tplink-16mlzma

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45489

4 years agoar71xx/image: fix imagesize of template tplink-8mlzma
John Crispin [Sat, 18 Apr 2015 10:19:09 +0000 (10:19 +0000)]
ar71xx/image: fix imagesize of template tplink-8mlzma

The new image size is verified by a running tplink device and checked
against mktplinkfw source code.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 45488

4 years agoRemoved reference to imaginary procd_add_interface_reload in procd.sh
John Crispin [Sat, 18 Apr 2015 10:19:02 +0000 (10:19 +0000)]
Removed reference to imaginary procd_add_interface_reload in procd.sh

The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload
doesn't seem to exist. I've removed the reference of it to minimize confusion.

Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>
SVN-Revision: 45487

4 years agobrcm63xx: fix bcm96318ref_p300 profile name
Jonas Gorski [Sat, 18 Apr 2015 09:34:17 +0000 (09:34 +0000)]
brcm63xx: fix bcm96318ref_p300 profile name

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45486

4 years agonetifd: update to the latest version, fixes issues in handling device config from...
Felix Fietkau [Fri, 17 Apr 2015 19:28:10 +0000 (19:28 +0000)]
netifd: update to the latest version, fixes issues in handling device config from interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45483

4 years agoqos-scripts: drop obsolete depdendency on iptabes-mod-filter (#19506)
Felix Fietkau [Fri, 17 Apr 2015 18:52:28 +0000 (18:52 +0000)]
qos-scripts: drop obsolete depdendency on iptabes-mod-filter (#19506)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45482

4 years agoiptables: remove layer7 leftovers (#19506)
Felix Fietkau [Fri, 17 Apr 2015 18:52:24 +0000 (18:52 +0000)]
iptables: remove layer7 leftovers (#19506)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45481

4 years agobcm53xx: add profiling support
Felix Fietkau [Fri, 17 Apr 2015 18:52:15 +0000 (18:52 +0000)]
bcm53xx: add profiling support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45480

4 years agonetwork: also shorten virtual interface names of ppp and 3g/4g connections
Steven Barth [Fri, 17 Apr 2015 14:47:12 +0000 (14:47 +0000)]
network: also shorten virtual interface names of ppp and 3g/4g connections

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45479

4 years agoimx6: put uboot-envtools in DEFAULT_PACKAGES
Luka Perkov [Fri, 17 Apr 2015 13:47:13 +0000 (13:47 +0000)]
imx6: put uboot-envtools in DEFAULT_PACKAGES

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45478

4 years agokirkwood: put uboot-envtools in DEFAULT_PACKAGES
Luka Perkov [Fri, 17 Apr 2015 13:47:09 +0000 (13:47 +0000)]
kirkwood: put uboot-envtools in DEFAULT_PACKAGES

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45477

4 years agonetwork: shorten names of generated interfaces
Steven Barth [Fri, 17 Apr 2015 13:10:19 +0000 (13:10 +0000)]
network: shorten names of generated interfaces

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45476

4 years agokernel: mark kmod-usb-bcma/ssb as hidden, they are only selected from ohci/ehci
Felix Fietkau [Fri, 17 Apr 2015 11:56:28 +0000 (11:56 +0000)]
kernel: mark kmod-usb-bcma/ssb as hidden, they are only selected from ohci/ehci

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45475

4 years agobrcm47xx: add buttons support for WRT310N v2
Rafał Miłecki [Fri, 17 Apr 2015 08:12:00 +0000 (08:12 +0000)]
brcm47xx: add buttons support for WRT310N v2

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45474

4 years agobcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
Rafał Miłecki [Fri, 17 Apr 2015 06:03:00 +0000 (06:03 +0000)]
bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45473

4 years agobrcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)
Rafał Miłecki [Fri, 17 Apr 2015 05:45:46 +0000 (05:45 +0000)]
brcm47xx: fix handling absolute paths in sysupgrade (for vendor formats)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45472

4 years agobusybox: fix an ash regression in handling local variables
Felix Fietkau [Fri, 17 Apr 2015 00:01:29 +0000 (00:01 +0000)]
busybox: fix an ash regression in handling local variables

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45471

4 years agobrcm47xx: rework vendor fw handling to don't duplicate upgrade calls
Rafał Miłecki [Thu, 16 Apr 2015 21:43:27 +0000 (21:43 +0000)]
brcm47xx: rework vendor fw handling to don't duplicate upgrade calls

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45470

4 years agobrcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k
Rafał Miłecki [Thu, 16 Apr 2015 21:20:37 +0000 (21:20 +0000)]
brcm47xx: explicitly select CPU_MIPS32_R2 and CPU_MIPSR2 for mips74k

The mips74k subtarget of brcm47xx configures gcc to compile for mips32r2;
however, the generated kernel config for 3.14 and later kernels ends up
with CPU_MIPS32_R1 and CPU_MIPSR1 selected.  The generated kernel config
for the 3.10 kernel (Barrier Breaker) properly selected CPU_MIPS32_R2 and
CPU_MIPSR2.  Modify the default kernel config for mips74k to explicitly
select CPU_MIPS32_R2 and CPU_MIPSR2.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Tested-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45469

4 years agokernel: accidentally committed a few patches in the wrong place, move them
Felix Fietkau [Thu, 16 Apr 2015 20:43:11 +0000 (20:43 +0000)]
kernel: accidentally committed a few patches in the wrong place, move them

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45468

4 years agobcm53xx: add power button for WXR-1900DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:55 +0000 (20:09 +0000)]
bcm53xx: add power button for WXR-1900DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45467

4 years agobcm53xx: add power button for Buffalo WZR-1750DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:48 +0000 (20:09 +0000)]
bcm53xx: add power button for Buffalo WZR-1750DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45466

4 years agobcm53xx: add USB LED for Buffalo WZR-1750DHP
Felix Fietkau [Thu, 16 Apr 2015 20:09:42 +0000 (20:09 +0000)]
bcm53xx: add USB LED for Buffalo WZR-1750DHP

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45465