openwrt/svn-archive/archive.git
6 years agoar71xx: ar934x_nfc: add experimental support for hardware ECC
Gabor Juhos [Thu, 19 Sep 2013 18:43:41 +0000 (18:43 +0000)]
ar71xx: ar934x_nfc: add experimental support for hardware ECC

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38069

6 years agoar71xx: ar934x_nfc: return error code from some low-level functions
Gabor Juhos [Thu, 19 Sep 2013 18:43:40 +0000 (18:43 +0000)]
ar71xx: ar934x_nfc: return error code from some low-level functions

Change some flow-level unctions to return with an
error code in order to be able to report errors
to the core code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38068

6 years agoar71xx: ar934x_nfc: use devm_* functions
Gabor Juhos [Thu, 19 Sep 2013 18:43:38 +0000 (18:43 +0000)]
ar71xx: ar934x_nfc: use devm_* functions

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38067

6 years agoar71xx: add profile and build image for the TL-MR13U board
Gabor Juhos [Thu, 19 Sep 2013 17:52:45 +0000 (17:52 +0000)]
ar71xx: add profile and build image for the TL-MR13U board

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38066

6 years agofirmware-utils/mktplinkfw: add support for the TL-MR13U board
Gabor Juhos [Thu, 19 Sep 2013 17:52:44 +0000 (17:52 +0000)]
firmware-utils/mktplinkfw: add support for the TL-MR13U board

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38065

6 years agoar71xx: add user-space support for the TL-MR13U board
Gabor Juhos [Thu, 19 Sep 2013 17:52:42 +0000 (17:52 +0000)]
ar71xx: add user-space support for the TL-MR13U board

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38064

6 years agoar71xx: add kernel support for TP-Link TL-MR13U
Gabor Juhos [Thu, 19 Sep 2013 17:52:41 +0000 (17:52 +0000)]
ar71xx: add kernel support for TP-Link TL-MR13U

This patch adds support for TP-Link TL-MR13U router with built-in 10AH
rechargeable battery.

The patch is based on kamwanlai's patch:
https://forum.openwrt.org/viewtopic.php?pid=206746#p206746

Updated to accommodate recent changes introduced with:
ar71xx: remove fs_* variables from image/Makefile

Signed-off-by: Oleg Titov <oleg.titov@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/4063/
[juhosg:
  - refresh and rename rename 930-add-tl-mr13u-support.patch =>
    625-MIPS-ath79-add-tl-mr13u-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38063

6 years agoar71xx: wnr2200: fix a typo in a LED name
Gabor Juhos [Thu, 19 Sep 2013 17:52:40 +0000 (17:52 +0000)]
ar71xx: wnr2200: fix a typo in a LED name

Reported-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38062

6 years agoar71xx: add profile and build image for the WNR2200 board
Gabor Juhos [Thu, 19 Sep 2013 16:56:51 +0000 (16:56 +0000)]
ar71xx: add profile and build image for the WNR2200 board

Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38061

6 years agoar71xx: add user-space support for the WNR2200 board
Gabor Juhos [Thu, 19 Sep 2013 16:56:50 +0000 (16:56 +0000)]
ar71xx: add user-space support for the WNR2200 board

Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38060

6 years agoar71xx: add kernel support for Netgear WNR2200 wireless router
Gabor Juhos [Thu, 19 Sep 2013 16:56:48 +0000 (16:56 +0000)]
ar71xx: add kernel support for Netgear WNR2200 wireless router

This patch adds OpenWRT support for the Netgear WNR2200 (N300)
wireless router with USB.

Technical details of this router can be found at
http://www.netgear.com/home/products/wirelessrouters/work-and-play/WNR2200.aspx
and http://wikidevi.com/wiki/Netgear_WNR2200

Signed-off-by: Aidan Kissane <aidankissane@googlemail.com>
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Patchwork: http://patchwork.openwrt.org/patch/4055/
[juhosg:
  - add commit message and SoB line from the original patch
  - remove dead code from mach-wnr2200.c
  - refresh 624-MIPS-ath79-WNR2200-support.patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38059

6 years agokernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185)
Felix Fietkau [Thu, 19 Sep 2013 06:33:53 +0000 (06:33 +0000)]
kernel: add AutoProbe for ppp_async and ppp_synctty (should fix #14185)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38055

6 years agoralink: make dcs930 uvc camera work
John Crispin [Thu, 19 Sep 2013 05:57:00 +0000 (05:57 +0000)]
ralink: make dcs930 uvc camera work

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38054

6 years agoralink: add support for dalink dcs930l ipcam
John Crispin [Thu, 19 Sep 2013 05:56:46 +0000 (05:56 +0000)]
ralink: add support for dalink dcs930l ipcam

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38053

6 years agoralink: add back dwc_otg driver
John Crispin [Thu, 19 Sep 2013 05:56:31 +0000 (05:56 +0000)]
ralink: add back dwc_otg driver

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38052

6 years agolantiq: style fixes
Luka Perkov [Thu, 19 Sep 2013 00:50:49 +0000 (00:50 +0000)]
lantiq: style fixes

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38051

6 years agolantiq: add initial support for Siemens GIGASX76X
Luka Perkov [Thu, 19 Sep 2013 00:50:48 +0000 (00:50 +0000)]
lantiq: add initial support for Siemens GIGASX76X

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38050

6 years agolantiq: add support for ZyXEL P2601HNFX
Luka Perkov [Thu, 19 Sep 2013 00:50:46 +0000 (00:50 +0000)]
lantiq: add support for ZyXEL P2601HNFX

SVN-Revision: 38049

6 years agolantiq: add support for ZTE H201L
Luka Perkov [Thu, 19 Sep 2013 00:50:44 +0000 (00:50 +0000)]
lantiq: add support for ZTE H201L

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38048

6 years agomalta: target.mk cosmetical fixup
Luka Perkov [Wed, 18 Sep 2013 23:03:47 +0000 (23:03 +0000)]
malta: target.mk cosmetical fixup

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38047

6 years agobrcm47xx: b44: bgmac: some small changes to the phylib patches
Hauke Mehrtens [Wed, 18 Sep 2013 16:49:52 +0000 (16:49 +0000)]
brcm47xx: b44: bgmac: some small changes to the phylib patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38044

6 years agolantiq: fix bug in hcd gpio detetcion code
John Crispin [Wed, 18 Sep 2013 16:31:49 +0000 (16:31 +0000)]
lantiq: fix bug in hcd gpio detetcion code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38043

6 years agolantiq: fix FRITZ7320 flash window size
John Crispin [Wed, 18 Sep 2013 16:31:45 +0000 (16:31 +0000)]
lantiq: fix FRITZ7320 flash window size

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38042

6 years agolantiq: fix ath9k eeprom loading order bug
John Crispin [Wed, 18 Sep 2013 16:31:41 +0000 (16:31 +0000)]
lantiq: fix ath9k eeprom loading order bug

https://dev.openwrt.org/ticket/14131
http://patchwork.openwrt.org/patch/4038/

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38041

6 years agoralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350
John Crispin [Wed, 18 Sep 2013 16:31:37 +0000 (16:31 +0000)]
ralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350

https://dev.openwrt.org/ticket/14129

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38040

6 years agolantiq: fix up default firmware selection for spanish and italian routers
John Crispin [Wed, 18 Sep 2013 16:31:32 +0000 (16:31 +0000)]
lantiq: fix up default firmware selection for spanish and italian routers

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38039

6 years agobrcm47xx: bgmac: b44: add support for Byte Queue Limits
Hauke Mehrtens [Wed, 18 Sep 2013 15:19:25 +0000 (15:19 +0000)]
brcm47xx: bgmac: b44: add support for Byte Queue Limits

This adds support for Byte Queue Limits in bgmac and b44, now it is
possible to use more advanced network queue control algorithms.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38038

6 years agobrcm47xx: update the clock fixes for BCM5354
Hauke Mehrtens [Wed, 18 Sep 2013 14:36:03 +0000 (14:36 +0000)]
brcm47xx: update the clock fixes for BCM5354

This updates the patches for BCM5354 to the version send for upstream
Linux inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38037

6 years agobrcm47xx: update board detection patches
Hauke Mehrtens [Wed, 18 Sep 2013 14:33:54 +0000 (14:33 +0000)]
brcm47xx: update board detection patches

This is now the version which was send for mainline Linux kernel
inclusion. The data needed to detection a board is now stored in init
data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38036

6 years agobrcm47xx: add detection for Linksys E900 V1
Hauke Mehrtens [Wed, 18 Sep 2013 14:32:05 +0000 (14:32 +0000)]
brcm47xx: add detection for Linksys E900 V1

Thank you Rafał for the data.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38035

6 years agoath9k: add missing tx locking
Felix Fietkau [Wed, 18 Sep 2013 13:24:55 +0000 (13:24 +0000)]
ath9k: add missing tx locking

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38034

6 years agoodhcp6c: Restart when server returns IAID error
Steven Barth [Wed, 18 Sep 2013 10:27:15 +0000 (10:27 +0000)]
odhcp6c: Restart when server returns IAID error

SVN-Revision: 38032

6 years agolantiq: add v3.10 patches
John Crispin [Tue, 17 Sep 2013 21:46:10 +0000 (21:46 +0000)]
lantiq: add v3.10 patches

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38031

6 years agolantiq: add wifi eep to a803 dts file
John Crispin [Tue, 17 Sep 2013 21:46:04 +0000 (21:46 +0000)]
lantiq: add wifi eep to a803 dts file

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38030

6 years agolantiq: add a subtarget for the xrx200 SoC family
John Crispin [Tue, 17 Sep 2013 21:46:00 +0000 (21:46 +0000)]
lantiq: add a subtarget for the xrx200 SoC family

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38029

6 years agolantiq: update packages for v3.10
John Crispin [Tue, 17 Sep 2013 21:45:56 +0000 (21:45 +0000)]
lantiq: update packages for v3.10

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38028

6 years agolantiq: update dts files
John Crispin [Tue, 17 Sep 2013 21:45:50 +0000 (21:45 +0000)]
lantiq: update dts files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38027

6 years agoralink: add pinctrl driver
John Crispin [Tue, 17 Sep 2013 21:45:44 +0000 (21:45 +0000)]
ralink: add pinctrl driver

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38026

6 years agoralink: change subtarget order
John Crispin [Tue, 17 Sep 2013 21:45:39 +0000 (21:45 +0000)]
ralink: change subtarget order

this will make image builder build rt305x targets per default

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38025

6 years agobase-files: add a post start hook for procd managed services
John Crispin [Tue, 17 Sep 2013 21:45:34 +0000 (21:45 +0000)]
base-files: add a post start hook for procd managed services

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38024

6 years agoprocd: convert various packages to procd style init.d scripts
John Crispin [Tue, 17 Sep 2013 21:45:30 +0000 (21:45 +0000)]
procd: convert various packages to procd style init.d scripts

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38023

6 years agoprocd: update to latest git head
John Crispin [Tue, 17 Sep 2013 21:45:24 +0000 (21:45 +0000)]
procd: update to latest git head

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38022

6 years agokernel: make most modules use AutoProbe
John Crispin [Tue, 17 Sep 2013 21:45:17 +0000 (21:45 +0000)]
kernel: make most modules use AutoProbe

now that we have modprobe we can set more than half of the modules to AutoProbe

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38021

6 years agoinclude: add AutoProbe support
John Crispin [Tue, 17 Sep 2013 21:45:05 +0000 (21:45 +0000)]
include: add AutoProbe support

This is needed to make modprobe work

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38020

6 years agoubox: make use of modprobe
John Crispin [Tue, 17 Sep 2013 21:45:01 +0000 (21:45 +0000)]
ubox: make use of modprobe

ubox now has modprobe support
build and install the tool

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38019

6 years agolibubox: add packaging info for uloop lua binding
John Crispin [Tue, 17 Sep 2013 21:44:52 +0000 (21:44 +0000)]
libubox: add packaging info for uloop lua binding

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38018

6 years agoath9k: merge a fix for PS-Poll responses + aggregation
Felix Fietkau [Tue, 17 Sep 2013 10:07:56 +0000 (10:07 +0000)]
ath9k: merge a fix for PS-Poll responses + aggregation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38017

6 years agokernel: backport a fix for multiqueue selection to prevent tcp reordering with fair...
Felix Fietkau [Tue, 17 Sep 2013 10:07:52 +0000 (10:07 +0000)]
kernel: backport a fix for multiqueue selection to prevent tcp reordering with fair queueing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38016

6 years agokernel: fix config symbol for kmod-crypto-hash
Felix Fietkau [Tue, 17 Sep 2013 09:54:05 +0000 (09:54 +0000)]
kernel: fix config symbol for kmod-crypto-hash

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38015

6 years agomac80211: drop spoofed packets in ad-hoc mode (fixes #12427)
Felix Fietkau [Tue, 17 Sep 2013 09:17:40 +0000 (09:17 +0000)]
mac80211: drop spoofed packets in ad-hoc mode (fixes #12427)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38013

6 years agobrcm47xx: Add support for Huawei E970
Hauke Mehrtens [Mon, 16 Sep 2013 21:09:10 +0000 (21:09 +0000)]
brcm47xx: Add support for Huawei E970

This patch adds support for Huawei E970 wireless gateway devices.
It has been tested on an E970 labelled as T-Mobile web'n'walk Box IV.
E960/B970 should work too, from what I know it's basically the same hardware.

The device has a Broadcom BCM5354 SoC and a built-in 3G USB modem.

It uses a hardware watchdog which needs GPIO-7 to be toggled at least
every 1-2 seconds. This patch uses gpio_wdt module (see my previous
patch today) to take care of this.

Tested and works:  3G wan,  wlan+LED,  VLAN config,  failsafe using reset
button,   image to be used for upgrade from OEM firmware's web interface

Link to the wiki page I've created:  <http://wiki.openwrt.org/toh/huawei/e970>

Issue:

* lzma-loader crashes, so gzipped kernel is used. Presumably due to watchdog
  reset during kernel decompress.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 38011

6 years agokernel: add generic GPIO watchdog driver
Hauke Mehrtens [Mon, 16 Sep 2013 21:07:52 +0000 (21:07 +0000)]
kernel: add generic GPIO watchdog driver

This is used on Huawei E970 (brcm47xx).

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 38010

6 years agobrcm47xx: add detection for Phicomm M1
Hauke Mehrtens [Mon, 16 Sep 2013 19:53:09 +0000 (19:53 +0000)]
brcm47xx: add detection for Phicomm M1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38009

6 years agobroadcom-diag: add GPIO configuration for Linksys E2000 V1
Hauke Mehrtens [Mon, 16 Sep 2013 19:52:23 +0000 (19:52 +0000)]
broadcom-diag: add GPIO configuration for Linksys E2000 V1

Thank you Javier Achirica for the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38008

6 years agobroadcom-diag: Add WRT310N v1 gpio leds and buttons
Hauke Mehrtens [Mon, 16 Sep 2013 19:50:14 +0000 (19:50 +0000)]
broadcom-diag: Add WRT310N v1 gpio leds and buttons

Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38007

6 years agobrcm47xx: detect Linksys E1200 V2
Hauke Mehrtens [Mon, 16 Sep 2013 19:49:02 +0000 (19:49 +0000)]
brcm47xx: detect Linksys E1200 V2

This adds detection for Linksys E1200 V2

Thank you Lightsword and Rafał.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38006

6 years agobrcm47xx: mtd: bcm47xxpart: detect "factory" partition
Hauke Mehrtens [Mon, 16 Sep 2013 19:47:30 +0000 (19:47 +0000)]
brcm47xx: mtd: bcm47xxpart: detect "factory" partition

A new type of partition with magic FCTY was found on Huawei E970:
46 43 54 59 4b 51 37 4e  41 42 31 38 41 32 39 30  |FCTYKQ7NAB18A290|

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38005

6 years agobrcm47xx: bgmac: implement unaligned addressing for DMA rings that support it
Hauke Mehrtens [Mon, 16 Sep 2013 19:46:34 +0000 (19:46 +0000)]
brcm47xx: bgmac: implement unaligned addressing for DMA rings that support it

This is important patch for new devices that support unaligned
addressing. That devices suffer from the backward-compatibility bug in
DMA engine. In theory we should be able to use old mechanism, but in
practice DMA address seems to be randomly copied into status register
when hardware reaches end of a ring. This breaks reading slot number
from status register and we can't use DMA anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38004

6 years agokernel/3.10: add new Kconfig option for firmware partition split
Gabor Juhos [Sun, 15 Sep 2013 17:03:29 +0000 (17:03 +0000)]
kernel/3.10: add new Kconfig option for firmware partition split

Add a new kernel config option for generic firmware partition
split support and change the uImage split support to depend on
the new option. Aslo rename the MTD_UIMAGE_SPLIT_NAME option to
MTD_SPLIT_FIRMWARE_NAME to make it more generic.

The patch is in preparation for multiple firmware format
support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38002

6 years agobrcm47xx: add detection code for Huawei E970
Hauke Mehrtens [Sun, 15 Sep 2013 17:00:45 +0000 (17:00 +0000)]
brcm47xx: add detection code for Huawei E970

This is based on a patch by Mathias Adam.

Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38001

6 years agokernel: update 3.10 to 3.10.12
Gabor Juhos [Sun, 15 Sep 2013 16:00:41 +0000 (16:00 +0000)]
kernel: update 3.10 to 3.10.12

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38000

6 years agobrcm47xx: bgmac: allow bigger et_swtype nvram variable
Hauke Mehrtens [Sun, 15 Sep 2013 15:50:41 +0000 (15:50 +0000)]
brcm47xx: bgmac: allow bigger et_swtype nvram variable

Without this patch it is impossible to read et_swtype, because the 1
byte space is needed for the terminating null byte. Now it should be
possible to read decimal and hex vars of max 8 bit.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37999

6 years agobrcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition
Hauke Mehrtens [Sun, 15 Sep 2013 15:47:45 +0000 (15:47 +0000)]
brcm47xx: mtd: bcm47xxpart: detect block aligned Squashfs partition

Most of the bcm47xx devices use TRX format for storing kernel and some
partition like Squashfs or JFFS2. This is pretty flexible solution, CFE
(the bootloader) just writes (and later boots) TRX at some hardcoded
place and paritions can vary in the size.

However some devices don't use TRX format. Very recently we have
discovered ZTE H218N that has kernel and rootfs partitions at some
"random" places.

This patch allows Linux find a rootfs partition after installing custom
image with a CFE bootloader.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 37998

6 years agokernel/3.10: move OpenWrt MTD options into a submenu
Gabor Juhos [Sun, 15 Sep 2013 15:16:16 +0000 (15:16 +0000)]
kernel/3.10: move OpenWrt MTD options into a submenu

Separate OpenWrt specific MTD options from the mainline
option by moving those into a new submenu in the kernel
configuration interface.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37997

6 years agobrcm47xx: update board detection patch
Hauke Mehrtens [Sun, 15 Sep 2013 15:08:29 +0000 (15:08 +0000)]
brcm47xx: update board detection patch

* Use different structs depending on the number of nvram variables to check.
* Add detection of ZTE H218N, this closes #14151.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37996

6 years agokernel: b53: detect revision of BCM5325
Hauke Mehrtens [Sun, 15 Sep 2013 13:30:49 +0000 (13:30 +0000)]
kernel: b53: detect revision of BCM5325

The revision is stored in a different register than it is in other
Broadcom switches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37995

6 years agokernel: b53: fix vlan write for BCM5325 revison 3+
Hauke Mehrtens [Sun, 15 Sep 2013 13:29:14 +0000 (13:29 +0000)]
kernel: b53: fix vlan write for BCM5325 revison 3+

These switches are integrated in some recent BCM53XX and BCM47XX SoCs
like the BCM53572.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37994

6 years agobrcm47xx: bgmac: fix internal switch initialization
Hauke Mehrtens [Sun, 15 Sep 2013 09:39:19 +0000 (09:39 +0000)]
brcm47xx: bgmac: fix internal switch initialization

Some devices (BCM4749, BCM5357, BCM53572) have internal switch that
requires initialization. We already have code for this, but because
of the typo in code it was never working. This resulted in network not
working for some routers and possibility of soft-bricking them.

Use correct bit for switch initialization and fix typo in the define.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 37993

6 years agohostapd: adjust the md5sum for the uploaded source tarball (fixes #14155)
Felix Fietkau [Sat, 14 Sep 2013 20:07:35 +0000 (20:07 +0000)]
hostapd: adjust the md5sum for the uploaded source tarball (fixes #14155)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37990

6 years agobrcm47xx: detect Asus RT-N10
Hauke Mehrtens [Sat, 14 Sep 2013 16:19:21 +0000 (16:19 +0000)]
brcm47xx: detect Asus RT-N10

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37989

6 years agokernel: b53: use hard coded switch reset gpio on some boards.
Hauke Mehrtens [Sat, 14 Sep 2013 16:17:36 +0000 (16:17 +0000)]
kernel: b53: use hard coded switch reset gpio on some boards.

The Linksys wrt310n v1 does not have a robo_reset config variable in
nvram, but GPIO Pin 8 is the pin needed for resetting the external
switch, Linksys hard coded it into their source code.

Thank you Devastator for testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37988

6 years agokernel: b53: add soft reset for BCM539x switches
Hauke Mehrtens [Sat, 14 Sep 2013 16:14:02 +0000 (16:14 +0000)]
kernel: b53: add soft reset for BCM539x switches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37987

6 years agobrcm47xx: tg3: use the phy address from et0phyaddr and not the default phy address.
Hauke Mehrtens [Sat, 14 Sep 2013 16:10:37 +0000 (16:10 +0000)]
brcm47xx: tg3: use the phy address from et0phyaddr and not the default phy address.

Thank you Devastator for testing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37986

6 years agoath9k: add another minor tx path fix
Felix Fietkau [Sat, 14 Sep 2013 15:30:13 +0000 (15:30 +0000)]
ath9k: add another minor tx path fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37985

6 years agoiwinfo: when using nl80211, parse interface combinations instead of creating/deleting...
Felix Fietkau [Sat, 14 Sep 2013 14:46:51 +0000 (14:46 +0000)]
iwinfo: when using nl80211, parse interface combinations instead of creating/deleting interfaces

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37983

6 years agoath9k: merge a fix for tx processing issues with aggregation
Felix Fietkau [Sat, 14 Sep 2013 14:46:39 +0000 (14:46 +0000)]
ath9k: merge a fix for tx processing issues with aggregation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 37982

6 years agogeneric/3.10: remove unused defines from the rootfs split patch
Gabor Juhos [Sat, 14 Sep 2013 10:19:10 +0000 (10:19 +0000)]
generic/3.10: remove unused defines from the rootfs split patch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37981

6 years agogeneric/3.10: reduce number of ifdefs in the rootfs split code
Gabor Juhos [Sat, 14 Sep 2013 10:19:09 +0000 (10:19 +0000)]
generic/3.10: reduce number of ifdefs in the rootfs split code

Use the config_enabled() macro where it is possible.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37980

6 years agoimx6: add network defaults for GW5400-A
Luka Perkov [Fri, 13 Sep 2013 21:50:35 +0000 (21:50 +0000)]
imx6: add network defaults for GW5400-A

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37979

6 years agokernel: add missing config option
Hauke Mehrtens [Fri, 13 Sep 2013 20:39:23 +0000 (20:39 +0000)]
kernel: add missing config option

SVN-Revision: 37978

6 years agobrcm47xx: board detection, GPIO for Linksys E1000 V2.1
Hauke Mehrtens [Fri, 13 Sep 2013 19:24:08 +0000 (19:24 +0000)]
brcm47xx: board detection, GPIO for Linksys E1000 V2.1

This patch adds board detection for the Linksys E1000 V2.1 router, as well
as GPIO support for same.

This fixes bug #14135. Currently, wired networking isn't working on the
router, and I haven't tried the wireless, but with this patch, OpenWRT
successfully boots, and all the LEDs and buttons work properly.

Signed-off-by: Zachary Catlin <zcatlin@indiana.edu>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37977

6 years agoar71xx: refresh patches
Gabor Juhos [Fri, 13 Sep 2013 17:29:16 +0000 (17:29 +0000)]
ar71xx: refresh patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37976

6 years agogeneric/3.10: refresh patches
Gabor Juhos [Fri, 13 Sep 2013 17:29:14 +0000 (17:29 +0000)]
generic/3.10: refresh patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37975

6 years agogeneric/3.10: rename mtd patches
Gabor Juhos [Fri, 13 Sep 2013 17:24:25 +0000 (17:24 +0000)]
generic/3.10: rename mtd patches

  - change patch numbers to group the related stuff together,
  - add mtd prefix where it is missing,
  - use hyphens in the patch names

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37974

6 years agocns21xx: remove 3.8 support
Gabor Juhos [Fri, 13 Sep 2013 16:39:36 +0000 (16:39 +0000)]
cns21xx: remove 3.8 support

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37973

6 years agocns21xx: switch to 3.10
Gabor Juhos [Fri, 13 Sep 2013 16:39:34 +0000 (16:39 +0000)]
cns21xx: switch to 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37972

6 years agocns21xx: add support for 3.10
Gabor Juhos [Fri, 13 Sep 2013 16:39:33 +0000 (16:39 +0000)]
cns21xx: add support for 3.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37971

6 years agobrcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device
Hauke Mehrtens [Fri, 13 Sep 2013 16:00:52 +0000 (16:00 +0000)]
brcm47xx: do not use GPIO configuration of WRT54G for every unknown Linksys device

Most of the Linksys devices without an own GPIO configuration where
detected as WRT54G. On one board this made OpenWrt to boot into
failsafe every time, because one GPIO configurated as button was not a
button.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37970

6 years agobrcm47xx: detect WRT310NV1
Hauke Mehrtens [Fri, 13 Sep 2013 15:56:35 +0000 (15:56 +0000)]
brcm47xx: detect WRT310NV1

Thanks Devastator for testing

SVN-Revision: 37969

6 years agocns21xx: make cns21xx-ehci a separate driver
Gabor Juhos [Fri, 13 Sep 2013 15:38:42 +0000 (15:38 +0000)]
cns21xx: make cns21xx-ehci a separate driver

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37968

6 years agocns21xx: disable legacy PTY devices
Gabor Juhos [Fri, 13 Sep 2013 15:38:41 +0000 (15:38 +0000)]
cns21xx: disable legacy PTY devices

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37967

6 years agocns21xx: fix broken case statement in led defaults file
Gabor Juhos [Fri, 13 Sep 2013 15:38:40 +0000 (15:38 +0000)]
cns21xx: fix broken case statement in led defaults file

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37966

6 years agocns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options
Gabor Juhos [Fri, 13 Sep 2013 15:38:39 +0000 (15:38 +0000)]
cns21xx: enable XZ_DEC_ARM and XZ_DEC_BCJ kernel options

Squashfs is unable to decompress some blocks without that:

  [    0.970000] SQUASHFS error: xz_dec_run error, data probably corrupt
  [    0.980000] SQUASHFS error: squashfs_read_data failed to read block 0x29a72
  [    0.990000] SQUASHFS error: Unable to read fragment cache entry [29a72]
  [    1.000000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
  [    1.010000] SQUASHFS error: Unable to read fragment cache entry [29a72]
  [    1.020000] SQUASHFS error: Unable to read page, block 29a72, size 14c50
  [    1.260000] SQUASHFS error: xz_dec_run error, data probably corrupt

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37965

6 years agoar71xx: add support for TL-MR3040 v2
Gabor Juhos [Fri, 13 Sep 2013 15:28:50 +0000 (15:28 +0000)]
ar71xx: add support for TL-MR3040 v2

This patch adds support for building firmware images for the
TP-Link TL-MR3040 v2. Tested and working on v2.1 hardware.

Signed-off-by: Mads Hansen <d@taba.se>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37964

6 years agoar71xx: add wireless bgn led support for dir-825-c1
Gabor Juhos [Fri, 13 Sep 2013 15:01:40 +0000 (15:01 +0000)]
ar71xx: add wireless bgn led support for dir-825-c1

I checked the GPL code drop from D-Link and tried to get the wireless
and LAN switch LEDs to light up. I found some references in
AthSDK/www/DIR-825_C1/bsp.h as well as
AthSDK/www/DIR-825_C1/rootfs/etc/sysconfig/S2gpio.sh, but in the end I
only got the led for 2.4GHz to work. Anyway, here's the patch.

Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 37963

6 years agouhttpd: udpat to git head
Jo-Philipp Wich [Fri, 13 Sep 2013 13:24:45 +0000 (13:24 +0000)]
uhttpd: udpat to git head

- fixes buffer corruption with JSON-RPC list calls
- change JSON-RPC protocol to include the session ID into the call
  attributes instead of passing it via the URL
- forcibly pass effective session ID as "ubus_rpc_session" attribute
  to called procedures
- change ubus acl checking to conform with new ubus session namespace

SVN-Revision: 37962

6 years agorpcd: update to git head
Jo-Philipp Wich [Fri, 13 Sep 2013 13:24:32 +0000 (13:24 +0000)]
rpcd: update to git head

- recalculate session ACLs on reload
- support negative access group expressions in /etc/config/rpcd
- prevent destryoing the default session
- use "ubus_rpc_session" attribute as session identifier to enforce JSON-RPC proxy security

SVN-Revision: 37961

6 years agokernel: gsc depends on kmod-i2c-core
Luka Perkov [Thu, 12 Sep 2013 23:38:54 +0000 (23:38 +0000)]
kernel: gsc depends on kmod-i2c-core

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 37960

6 years agobrcm47xx: remove support for kernel 3.8
Hauke Mehrtens [Thu, 12 Sep 2013 22:07:12 +0000 (22:07 +0000)]
brcm47xx: remove support for kernel 3.8

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 37959

6 years agobrcm47xx: add default config for new kernel config option
Hauke Mehrtens [Thu, 12 Sep 2013 22:04:55 +0000 (22:04 +0000)]
brcm47xx: add default config for new kernel config option

SVN-Revision: 37958