openwrt/svn-archive/archive.git
8 years ago[package] iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong...
Jo-Philipp Wich [Sun, 22 May 2011 12:02:35 +0000 (12:02 +0000)]
[package] iw: fix calculation of fractional multicast rates like 5.5Mbps due to wrong operator precedence

SVN-Revision: 26968

8 years agoadd LD_LIBRARY to cmake.mk
Felix Fietkau [Fri, 20 May 2011 16:21:30 +0000 (16:21 +0000)]
add LD_LIBRARY to cmake.mk

Otherwise cmake programs try to link with host ld.so

Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26963

8 years ago[package] firewall: explictely mention network in default configuration, makes it...
Jo-Philipp Wich [Fri, 20 May 2011 13:45:40 +0000 (13:45 +0000)]
[package] firewall: explictely mention network in default configuration, makes it less confusing

SVN-Revision: 26961

8 years ago[brcm63xx] add support for BT Voyager 2110 (#8810)
Florian Fainelli [Fri, 20 May 2011 10:06:25 +0000 (10:06 +0000)]
[brcm63xx] add support for BT Voyager 2110 (#8810)

Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 26959

8 years ago[brcm63xx] add support for DSL-2640B rev B2
Florian Fainelli [Fri, 20 May 2011 10:06:22 +0000 (10:06 +0000)]
[brcm63xx] add support for DSL-2640B rev B2

Signed-off-by: Adrian Feliks <mexit@o2.pl>
SVN-Revision: 26958

8 years ago[brcm63xx] refresh patches
Florian Fainelli [Fri, 20 May 2011 10:06:18 +0000 (10:06 +0000)]
[brcm63xx] refresh patches

SVN-Revision: 26957

8 years ago[brcm63xx] add support for D-Link DVA-G3810BN/TL
Florian Fainelli [Fri, 20 May 2011 10:06:15 +0000 (10:06 +0000)]
[brcm63xx] add support for D-Link DVA-G3810BN/TL

This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>
SVN-Revision: 26956

8 years ago[kernel] refresh 2.6.37 patches
Florian Fainelli [Fri, 20 May 2011 10:06:11 +0000 (10:06 +0000)]
[kernel] refresh 2.6.37 patches

SVN-Revision: 26955

8 years ago[brcm63xx] add support for BT Voyager 2500 (#9070)
Florian Fainelli [Fri, 20 May 2011 10:06:07 +0000 (10:06 +0000)]
[brcm63xx] add support for BT Voyager 2500 (#9070)

SVN-Revision: 26954

8 years ago[brcm63xx] add support for USR9108 LEDs (#9372)
Florian Fainelli [Fri, 20 May 2011 10:06:04 +0000 (10:06 +0000)]
[brcm63xx] add support for USR9108 LEDs (#9372)

SVN-Revision: 26953

8 years ago[ar7] add GT701 LEDs support (#9382)
Florian Fainelli [Fri, 20 May 2011 10:06:00 +0000 (10:06 +0000)]
[ar7] add GT701 LEDs support (#9382)

SVN-Revision: 26952

8 years agobroadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api
Felix Fietkau [Thu, 19 May 2011 10:08:02 +0000 (10:08 +0000)]
broadcom-wl: fix wild ssb_device accesses as pci_dev for legacy pci dma api

broadcom-wl driver bound to ssb device with ssb driver probe
have osh handle struct pdev pointer value initialized with
ssb_device pointer. Later on pdev is used with legacy pci
dma api as pci_dev thus causing oops sometimes.

The patch replaces legacy pci dma api and pass relevant
device struct pointer to avoid crashes.
Signed-off-by: George Kashperko <george@znau.edu.ua>
SVN-Revision: 26949

8 years agobroadcom-wl: fix uninitialized variable
Felix Fietkau [Thu, 19 May 2011 10:07:57 +0000 (10:07 +0000)]
broadcom-wl: fix uninitialized variable

It was causing an occasional kernel oops.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 26948

8 years agoath9k: fix some locking issues in the tx fifo cleanup patch
Felix Fietkau [Thu, 19 May 2011 09:33:45 +0000 (09:33 +0000)]
ath9k: fix some locking issues in the tx fifo cleanup patch

SVN-Revision: 26947

8 years agoSimple typo for kmod- prefix in alix2 target makefile.
Daniel Dickinson [Thu, 19 May 2011 04:29:40 +0000 (04:29 +0000)]
Simple typo for kmod- prefix in alix2 target makefile.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26945

8 years ago[omap35xx]: Remove override of max80211.sh
Hamish Guthrie [Wed, 18 May 2011 12:43:54 +0000 (12:43 +0000)]
[omap35xx]: Remove override of max80211.sh

SVN-Revision: 26936

8 years agoath9k: clean up tx fifo handling on ar9380 based hardware
Felix Fietkau [Wed, 18 May 2011 12:03:08 +0000 (12:03 +0000)]
ath9k: clean up tx fifo handling on ar9380 based hardware

SVN-Revision: 26934

8 years agoath9k: fix a small race condition in the tx_last_beacon patch
Felix Fietkau [Wed, 18 May 2011 12:03:04 +0000 (12:03 +0000)]
ath9k: fix a small race condition in the tx_last_beacon patch

SVN-Revision: 26933

8 years ago[omap35xx] Move beagleboard base-files to beagleboard sub-target, remove unused mac80...
Hamish Guthrie [Wed, 18 May 2011 11:50:36 +0000 (11:50 +0000)]
[omap35xx] Move beagleboard base-files to beagleboard sub-target, remove unused mac80211.sh

SVN-Revision: 26932

8 years ago[PATCH] ipcalc.sh CIDR notation
Jo-Philipp Wich [Wed, 18 May 2011 09:50:06 +0000 (09:50 +0000)]
[PATCH] ipcalc.sh CIDR notation
Hi,

the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:

# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

with this patch you can also execute it with:

sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11

The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.

Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.

Regards, Manuel

SVN-Revision: 26930

8 years agomac80211: sync the CONFIG_ATH5K_DEBUG make override with the buildflags override...
Felix Fietkau [Tue, 17 May 2011 18:23:50 +0000 (18:23 +0000)]
mac80211: sync the CONFIG_ATH5K_DEBUG make override with the buildflags override (thx, KanjiMonster)

SVN-Revision: 26927

8 years agometadata: do not emit feature flag selects for targets which have subtargets - fixes...
Felix Fietkau [Tue, 17 May 2011 12:54:45 +0000 (12:54 +0000)]
metadata: do not emit feature flag selects for targets which have subtargets - fixes a buildbot error cause by ssb not being blacklisted for lantiq falcon

SVN-Revision: 26926

8 years agoar71xx: don't probe the LAN PHY
Matteo Croce [Tue, 17 May 2011 11:15:24 +0000 (11:15 +0000)]
ar71xx: don't probe the LAN PHY

SVN-Revision: 26924

8 years agoath9k: implement tx_last_beacon() to allow mac80211 to respond to probe requests...
Felix Fietkau [Tue, 17 May 2011 11:14:15 +0000 (11:14 +0000)]
ath9k: implement tx_last_beacon() to allow mac80211 to respond to probe requests in ad-hoc mode without creating too much spam

SVN-Revision: 26923

8 years agoar71xx: detect link on LAN ports
Matteo Croce [Tue, 17 May 2011 11:12:56 +0000 (11:12 +0000)]
ar71xx: detect link on LAN ports

SVN-Revision: 26922

8 years ago[modules]
John Crispin [Tue, 17 May 2011 10:48:37 +0000 (10:48 +0000)]
[modules]
* add missing aes dependency to mv_cesa

Signed-off-by: Jan Willies <jan@willies.info>
SVN-Revision: 26920

8 years ago[x86]
John Crispin [Tue, 17 May 2011 10:35:14 +0000 (10:35 +0000)]
[x86]

* adds support for Artec Thincan

Signed-of-By: Lauri V├Ásandi <lauri.vosandi@gmail.com>
SVN-Revision: 26919

8 years ago[tools]
John Crispin [Tue, 17 May 2011 10:33:46 +0000 (10:33 +0000)]
[tools]
* adds mkelfimage

SVN-Revision: 26918

8 years agoath9k: fix ad-hoc nexttbtt calculation, which broke beacon transmission in some instances
Felix Fietkau [Tue, 17 May 2011 08:37:38 +0000 (08:37 +0000)]
ath9k: fix ad-hoc nexttbtt calculation, which broke beacon transmission in some instances

SVN-Revision: 26915

8 years agoath9k: fix issues with ad-hoc beacon slot selection
Felix Fietkau [Mon, 16 May 2011 21:50:30 +0000 (21:50 +0000)]
ath9k: fix issues with ad-hoc beacon slot selection

SVN-Revision: 26913

8 years agomac80211: update to 2011-05-13
Felix Fietkau [Mon, 16 May 2011 21:50:26 +0000 (21:50 +0000)]
mac80211: update to 2011-05-13

SVN-Revision: 26912

8 years agokernel: backport some ssb changes to support a mac80211 update
Felix Fietkau [Mon, 16 May 2011 21:50:20 +0000 (21:50 +0000)]
kernel: backport some ssb changes to support a mac80211 update

SVN-Revision: 26911

8 years ago[generic] remove an accidentally copied comment from the option.ko device patch
Jo-Philipp Wich [Sun, 15 May 2011 21:28:12 +0000 (21:28 +0000)]
[generic] remove an accidentally copied comment from the option.ko device patch

SVN-Revision: 26908

8 years ago[generic] add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422)
Jo-Philipp Wich [Sun, 15 May 2011 19:17:31 +0000 (19:17 +0000)]
[generic] add definitions for Alcatel X220D and Huawai E173s to option.ko (#9422)

SVN-Revision: 26906

8 years agokernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches
Hauke Mehrtens [Sun, 15 May 2011 17:23:02 +0000 (17:23 +0000)]
kernel: update kernel from 2.6.38.2 to 2.6.38.6 and refresh patches

Thank you Peter Wagner for the patch. I refreshed the kernel patches and added the md5sum of the kernel.

SVN-Revision: 26905

8 years agopackage/kernel: crypto: Remove renamed modules hack
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:35 +0000 (09:37 +0000)]
package/kernel: crypto: Remove renamed modules hack

Since the oldest kernel in trunk is 2.6.30 the modules always use the
newer names, so we can just use the _generic prefix directly.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26903

8 years agopackage/kernel: netfilter: Remove 2.4/2.6 references
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:32 +0000 (09:37 +0000)]
package/kernel: netfilter: Remove 2.4/2.6 references

There's only 2.6, so it doesn't make sense to mention modules that are
2.4 only or for modules that they are available only for 2.6.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26902

8 years agopackage/kernel: Remove all 2.4 definitions
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:28 +0000 (09:37 +0000)]
package/kernel: Remove all 2.4 definitions

With no 2.4 support in trunk, we can safely remove any 2.4 definitions for
kmods and merge the 2.6 definitions into the generic ones.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26901

8 years agopackage/kernel: Remove $(KMOD_SUFFIX) usage
Vasilis Tsiligiannis [Sun, 15 May 2011 09:37:24 +0000 (09:37 +0000)]
package/kernel: Remove $(KMOD_SUFFIX) usage

Since there's only 2.6 in trunk $(KMOD_SUFFIX) can be safely replaced with
ko for all mainline kernel modules.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26900

8 years agoar71xx: add link detection on Ubiquiti devices WAN port
Matteo Croce [Sat, 14 May 2011 23:31:50 +0000 (23:31 +0000)]
ar71xx: add link detection on Ubiquiti devices WAN port

SVN-Revision: 26891

8 years agouse correct macros and frame size in ag71xx
Matteo Croce [Sat, 14 May 2011 23:10:06 +0000 (23:10 +0000)]
use correct macros and frame size in ag71xx

SVN-Revision: 26890

8 years agoar71xx: cosmetic fixes
Matteo Croce [Sat, 14 May 2011 23:08:00 +0000 (23:08 +0000)]
ar71xx: cosmetic fixes

SVN-Revision: 26889

8 years agoCorrect libc path
Hamish Guthrie [Fri, 13 May 2011 11:52:40 +0000 (11:52 +0000)]
Correct libc path

SVN-Revision: 26885

8 years ago[omap35xx]: Add new defconfig and profile for es variant
Hamish Guthrie [Fri, 13 May 2011 11:49:52 +0000 (11:49 +0000)]
[omap35xx]: Add new defconfig and profile for es variant

SVN-Revision: 26884

8 years ago[omap35xx] Squash uids
Hamish Guthrie [Fri, 13 May 2011 10:36:39 +0000 (10:36 +0000)]
[omap35xx] Squash uids

SVN-Revision: 26883

8 years ago[x86] Removed Alix.mk profile which was accidently left as an empty file applying...
Daniel Dickinson [Fri, 13 May 2011 07:23:11 +0000 (07:23 +0000)]
[x86] Removed Alix.mk profile which was accidently left as an empty file applying the patch during r26879 and r26880.

SVN-Revision: 26882

8 years agoAdd missed files from previous commit: This patch provides an image suitable for...
Daniel Dickinson [Fri, 13 May 2011 06:08:49 +0000 (06:08 +0000)]
Add missed files from previous commit: This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.

Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26880

8 years agoThis patch provides an image suitable for the alix2*, alix3, and alix6 headless ...
Daniel Dickinson [Fri, 13 May 2011 06:06:42 +0000 (06:06 +0000)]
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.

Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.

GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)

GPIO 24 : Soft switch 1

No kernel version bump.  Added i2c-scx200-acb for lm-sensors support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879

8 years agobcm63xx: Add support for the T-Home Speedport W 303V
Florian Fainelli [Wed, 11 May 2011 13:34:14 +0000 (13:34 +0000)]
bcm63xx: Add support for the T-Home Speedport W 303V

Add the required board definition, default config and image generation for
the T-Home Speedport W 303V Typ B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26878

8 years agobcm63xx: Add firmware helpers for T-Home Speedport W 303V
Florian Fainelli [Wed, 11 May 2011 13:34:05 +0000 (13:34 +0000)]
bcm63xx: Add firmware helpers for T-Home Speedport W 303V

Add two helpers for generating correctly tagged images for the T-Home
Speedport W 303V Typ B as well as xor'd ones as required by CFE.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26877

8 years agobcm63xx: Update support for the DSL-274xB revision C
Florian Fainelli [Wed, 11 May 2011 13:33:50 +0000 (13:33 +0000)]
bcm63xx: Update support for the DSL-274xB revision C

Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used
for the rev C3 (same hardware) and add a fixup for C2. Also generate
images for C3.

While we are at it, rename the LEDs to conform to the Linux LED naming
conventions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26876

8 years agobcm63xx: Accept any led with power in its name as power led
Florian Fainelli [Wed, 11 May 2011 13:33:45 +0000 (13:33 +0000)]
bcm63xx: Accept any led with power in its name as power led

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26875

8 years agobcm63xx: Decouple Board ID and image name for fixup
Florian Fainelli [Wed, 11 May 2011 13:33:41 +0000 (13:33 +0000)]
bcm63xx: Decouple Board ID and image name for fixup

Make the fixup board ID independent from the image name to allow using
the same board ID for similar devices.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26874

8 years ago[ep93xx] switch to 2.6.38
Florian Fainelli [Wed, 11 May 2011 13:33:34 +0000 (13:33 +0000)]
[ep93xx] switch to 2.6.38

SVN-Revision: 26873

8 years ago[kernel] add missing 2.6.38 touchscreen config symbols
Florian Fainelli [Wed, 11 May 2011 13:33:30 +0000 (13:33 +0000)]
[kernel] add missing 2.6.38 touchscreen config symbols

SVN-Revision: 26872

8 years ago[kernel/modules]
John Crispin [Mon, 9 May 2011 20:28:04 +0000 (20:28 +0000)]
[kernel/modules]
package/kernel/modules/other.mk is getting big enough that putting the LEDs stuff into its own file makes sense.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26868

8 years ago[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC
John Crispin [Mon, 9 May 2011 15:21:58 +0000 (15:21 +0000)]
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC

This patch adds 802.1Q VLAN support for the ADM6996M chip.

The driver is loaded for both the FC and M model. It will detect which of the
two chips is connected. The FC model is initialised, but no further
functionality is offered.

The PHY driver will always report "100 Mbit/s, link up", for both the M and FC
models. This reflects the fact that the link between switch chip and Ethernet
MAC is always on[1].

Further documentation can be found in the kernel's
Documentation/networking/adm6996.txt

Signed-of-By: Peter Lebbing <peter@digitalbrains.com>
SVN-Revision: 26865

8 years agoar71xx: populate LED3 on the JA76PF board
Gabor Juhos [Sun, 8 May 2011 21:38:51 +0000 (21:38 +0000)]
ar71xx: populate LED3 on the JA76PF board

Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
SVN-Revision: 26862

8 years agoar71xx: add uci config for the WLAN LED on the WRT160NL
Gabor Juhos [Sun, 8 May 2011 21:38:49 +0000 (21:38 +0000)]
ar71xx: add uci config for the WLAN LED on the WRT160NL

Based on a patch by Magyar Szabolcs <mszabi@freemail.hu>

SVN-Revision: 26861

8 years agoar71xx: use phy0tpt trigger for the WLAN LEDs
Gabor Juhos [Sun, 8 May 2011 21:38:48 +0000 (21:38 +0000)]
ar71xx: use phy0tpt trigger for the WLAN LEDs

SVN-Revision: 26860

8 years agoar71xx: remove superfluous fifo_cfg overrides
Gabor Juhos [Sun, 8 May 2011 21:38:46 +0000 (21:38 +0000)]
ar71xx: remove superfluous fifo_cfg overrides

SVN-Revision: 26859

8 years ago[PATCH] ipv6: restore correct ECN handling on TCP xmit
Travis Kemen [Sun, 8 May 2011 17:08:06 +0000 (17:08 +0000)]
[PATCH] ipv6: restore correct ECN handling on TCP xmit
Thanks Dave Taht

SVN-Revision: 26858

8 years agoDeployment of IPv6 has opened up many more prefixes than just the
Travis Kemen [Sun, 8 May 2011 17:03:07 +0000 (17:03 +0000)]
Deployment of IPv6 has opened up many more prefixes than just the
2000::/3 space, so a default route of ::/0 is more correct.
Thanks Dave Taht

SVN-Revision: 26857

8 years agoar71xx: ag71xx: make switch register access atomic
Gabor Juhos [Sun, 8 May 2011 16:32:53 +0000 (16:32 +0000)]
ar71xx: ag71xx: make switch register access atomic

Reading of the PHY registers occasionally returns with bogus values
under heavy load. This misleads the PHY driver and thus causes false
link/speed change notifications which leads to performance loss.

This is easily noticable during an iperf session:

...
[  3] 52.0-53.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 53.0-54.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link down
br-lan: port 2(eth1) entering forwarding state
eth1: link up (100Mbps/Full duplex)
br-lan: port 2(eth1) entering forwarding state
br-lan: port 2(eth1) entering forwarding state
[  3] 54.0-55.0 sec  6.75 MBytes  56.6 Mbits/sec
[  3] 55.0-56.0 sec  0.00 Bytes  0.00 bits/sec
[  3] 56.0-57.0 sec  10.5 MBytes  88.1 Mbits/sec
...
[  3] 169.0-170.0 sec  11.4 MBytes  95.4 Mbits/sec
[  3] 170.0-171.0 sec  11.4 MBytes  95.4 Mbits/sec
eth1: link up (10Mbps/Half duplex)
[  3] 171.0-172.0 sec  7.63 MBytes  64.0 Mbits/sec
[  3] 172.0-173.0 sec  9.38 MBytes  78.6 Mbits/sec
eth1: link up (100Mbps/Full duplex)
[  3] 173.0-174.0 sec  11.3 MBytes  94.4 Mbits/sec
[  3] 174.0-175.0 sec  11.4 MBytes  95.4 Mbits/sec

SVN-Revision: 26856

8 years agoar71xx: ag71xx: fix section mismatch warnings
Gabor Juhos [Sun, 8 May 2011 13:30:36 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix section mismatch warnings

The function __devinit ag71xx_probe() references
a function __devexit ag71xx_phy_disconnect().
This is often seen when error handling in the init function
uses functionality in the exit path.
The fix is often to remove the __devexit annotation of
ag71xx_phy_disconnect() so it may be used outside an exit section.

The function ag71xx_phy_disconnect() references a function in an exit
section.
Often the function ag71xx_ar7240_cleanup() has valid usage outside the
exit section
and the fix is to remove the __devexit annotation of
ag71xx_ar7240_cleanup.

SVN-Revision: 26855

8 years agoar71xx: ag71xx: fix build error if debugfs is enabled
Gabor Juhos [Sun, 8 May 2011 13:30:26 +0000 (13:30 +0000)]
ar71xx: ag71xx: fix build error if debugfs is enabled

SVN-Revision: 26854

8 years ago[package] base-files: retrigger usb coldplug after module loading, solves usb_modeswi...
Jo-Philipp Wich [Sun, 8 May 2011 10:25:58 +0000 (10:25 +0000)]
[package] base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others (#9352)

SVN-Revision: 26848

8 years agobrcm47xx: update patches
Hauke Mehrtens [Sat, 7 May 2011 12:49:17 +0000 (12:49 +0000)]
brcm47xx: update patches

SVN-Revision: 26846

8 years agoar71xx: ag71xx: add debugfs entry for [rt]x_ring
Gabor Juhos [Sat, 7 May 2011 12:40:34 +0000 (12:40 +0000)]
ar71xx: ag71xx: add debugfs entry for [rt]x_ring

SVN-Revision: 26845

8 years agoar71xx: ag71xx: add timestamps to ag71xx_buf
Gabor Juhos [Sat, 7 May 2011 12:40:28 +0000 (12:40 +0000)]
ar71xx: ag71xx: add timestamps to ag71xx_buf

SVN-Revision: 26844

8 years agoar71xx: ag71xx: use dynamically allocated buffer for napi_stats
Gabor Juhos [Sat, 7 May 2011 12:40:26 +0000 (12:40 +0000)]
ar71xx: ag71xx: use dynamically allocated buffer for napi_stats

SVN-Revision: 26843

8 years agoar71xx: ag71xx: use debugfs_remove_recursive
Gabor Juhos [Sat, 7 May 2011 12:40:25 +0000 (12:40 +0000)]
ar71xx: ag71xx: use debugfs_remove_recursive

SVN-Revision: 26842

8 years agobase-files: fix a typo in etc/banner
Gabor Juhos [Sat, 7 May 2011 09:23:33 +0000 (09:23 +0000)]
base-files: fix a typo in etc/banner

SVN-Revision: 26841

8 years agoar71xx: override wmac device name for the AR934x SoCs
Gabor Juhos [Sat, 7 May 2011 09:23:32 +0000 (09:23 +0000)]
ar71xx: override wmac device name for the AR934x SoCs

SVN-Revision: 26840

8 years ago[ar7] remove useless patches
Florian Fainelli [Fri, 6 May 2011 12:37:40 +0000 (12:37 +0000)]
[ar7] remove useless patches

SVN-Revision: 26837

8 years ago[kernel] fill maintainer infos for a couple of targets
Florian Fainelli [Fri, 6 May 2011 12:37:36 +0000 (12:37 +0000)]
[kernel] fill maintainer infos for a couple of targets

SVN-Revision: 26836

8 years ago[malta] update to 2.6.38.2
Florian Fainelli [Thu, 5 May 2011 16:35:44 +0000 (16:35 +0000)]
[malta] update to 2.6.38.2

SVN-Revision: 26833

8 years ago[kernel] add missing 2.6.38 symbols
Florian Fainelli [Thu, 5 May 2011 16:35:40 +0000 (16:35 +0000)]
[kernel] add missing 2.6.38 symbols

SVN-Revision: 26832

8 years agobrcm47xx: when detecting a ssb pci device without an own sprom write the sprom data...
Hauke Mehrtens [Thu, 5 May 2011 14:05:21 +0000 (14:05 +0000)]
brcm47xx: when detecting a ssb pci device without an own sprom write the sprom data from the platform device to the correct pointer.

SVN-Revision: 26829

8 years agobrcm47xx: fix typo in patch
Hauke Mehrtens [Thu, 5 May 2011 13:18:35 +0000 (13:18 +0000)]
brcm47xx: fix typo in patch

SVN-Revision: 26828

8 years agolinux/ar71xx: add some missing symbols for nand/yaffs targets
Alexandros C. Couloumbis [Thu, 5 May 2011 07:19:46 +0000 (07:19 +0000)]
linux/ar71xx: add some missing symbols for nand/yaffs targets

SVN-Revision: 26827

8 years ago[package] lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
Jo-Philipp Wich [Wed, 4 May 2011 14:51:06 +0000 (14:51 +0000)]
[package] lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed

SVN-Revision: 26822

8 years agoath9k: add noise floor calibration fix that should improve stability
Felix Fietkau [Wed, 4 May 2011 14:35:35 +0000 (14:35 +0000)]
ath9k: add noise floor calibration fix that should improve stability

SVN-Revision: 26819

8 years agolinux/generic: port yaffs to 2.6.39
Alexandros C. Couloumbis [Wed, 4 May 2011 09:35:06 +0000 (09:35 +0000)]
linux/generic: port yaffs to 2.6.39

SVN-Revision: 26818

8 years agolinux/rb532: use kernel and initramfs tags on image generation
Alexandros C. Couloumbis [Wed, 4 May 2011 08:47:00 +0000 (08:47 +0000)]
linux/rb532: use kernel and initramfs tags on image generation

SVN-Revision: 26817

8 years ago[package] comgt: add tty hotplug remove handling, only iterate each tty once (#9211)
Jo-Philipp Wich [Wed, 4 May 2011 08:19:07 +0000 (08:19 +0000)]
[package] comgt: add tty hotplug remove handling, only iterate each tty once (#9211)

SVN-Revision: 26816

8 years ago[package] kernel: revert r26814
Jo-Philipp Wich [Tue, 3 May 2011 21:25:36 +0000 (21:25 +0000)]
[package] kernel: revert r26814

SVN-Revision: 26815

8 years ago[PATCH 1/2] kernel: add kmod-crypto-ipsec
Jo-Philipp Wich [Tue, 3 May 2011 21:22:43 +0000 (21:22 +0000)]
[PATCH 1/2] kernel: add kmod-crypto-ipsec
kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto
modules that are useful for IPSEC. This is an alternative to breaking
these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng
(rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).

Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814

8 years ago[PATCH 2/2] kernel: add kmod-crypto-{wq,rng,iv}
Jo-Philipp Wich [Tue, 3 May 2011 21:21:05 +0000 (21:21 +0000)]
[PATCH 2/2] kernel: add kmod-crypto-{wq,rng,iv}
Add kmod-crypto-iv as a dependency for kmod-ipsec.  Also remove the
extraneous kmod-crypto-core dependency to eliminate recursion.

Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813

8 years ago[PATCH 1/2] kernel: add kmod-crypto-{wq,rng,iv}
Jo-Philipp Wich [Tue, 3 May 2011 21:19:56 +0000 (21:19 +0000)]
[PATCH 1/2] kernel: add kmod-crypto-{wq,rng,iv}
This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv
packages. These packages provide some missing kernel crypto modules
which are required for IPSEC. The strongswan4, ipsec-tools, and possibly
other IPSEC packages do not work properly without these modules.

NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.

Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812

8 years ago[PATCH] geos: remove unneeded modules
Jo-Philipp Wich [Tue, 3 May 2011 21:18:12 +0000 (21:18 +0000)]
[PATCH] geos: remove unneeded modules
The via-sata and gpio-nsc modules are both unneeded on the Geos platform.

SVN-Revision: 26811

8 years ago[package] comgt: move ifup invocation back into background subshell to prevent hotplu...
Jo-Philipp Wich [Tue, 3 May 2011 19:45:55 +0000 (19:45 +0000)]
[package] comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks

SVN-Revision: 26810

8 years ago[package] comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug...
Jo-Philipp Wich [Tue, 3 May 2011 19:39:13 +0000 (19:39 +0000)]
[package] comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug (#9211)

SVN-Revision: 26809

8 years ago[package] base-files: cleanup permissions of device files in common hotplug rules...
Jo-Philipp Wich [Tue, 3 May 2011 19:37:59 +0000 (19:37 +0000)]
[package] base-files: cleanup permissions of device files in common hotplug rules (#9211)

SVN-Revision: 26808

8 years ago[package] hotplug2: introduce tty subsystem events (#9211)
Jo-Philipp Wich [Tue, 3 May 2011 19:35:58 +0000 (19:35 +0000)]
[package] hotplug2: introduce tty subsystem events (#9211)

SVN-Revision: 26807

8 years ago[package] firewall: revert accidential committed changes from r26805
Jo-Philipp Wich [Mon, 2 May 2011 12:55:36 +0000 (12:55 +0000)]
[package] firewall: revert accidential committed changes from r26805

SVN-Revision: 26806

8 years ago[PATCH] firewall: provide examples of ssh port relocation on firewall and IPsec passt...
Jo-Philipp Wich [Mon, 2 May 2011 12:54:31 +0000 (12:54 +0000)]
[PATCH] firewall: provide examples of ssh port relocation on firewall and IPsec passthrough
Two examples of potentially useful configurations (commented out, of course):

(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.

(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805

8 years ago[PATCH] quilt: fix building with dash
Jo-Philipp Wich [Mon, 2 May 2011 12:53:32 +0000 (12:53 +0000)]
[PATCH] quilt: fix building with dash
`test x == x` gives a syntax error with dash (standard in Debian).
The modified patch reflects the current upstream:
http://git.savannah.gnu.org/cgit/quilt.git/commit/?id=38df0b210c3df67f3e784af92232ae1946b98ecd

SVN-Revision: 26804

8 years ago[uml] update to 2.6.38
Florian Fainelli [Mon, 2 May 2011 07:57:25 +0000 (07:57 +0000)]
[uml] update to 2.6.38

SVN-Revision: 26803

8 years agocns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet...
Felix Fietkau [Mon, 2 May 2011 00:28:30 +0000 (00:28 +0000)]
cns3xxx: remove one of the dma cache patches, it causes a regression in the ethernet driver

SVN-Revision: 26802