openwrt/svn-archive/archive.git
8 years ago[omap24xx] resync config
Florian Fainelli [Sun, 29 Jul 2012 13:20:39 +0000 (13:20 +0000)]
[omap24xx] resync config

SVN-Revision: 32908

8 years ago[omap24xx] use the same description as other omap platforms (without the dash)
Florian Fainelli [Sun, 29 Jul 2012 13:20:35 +0000 (13:20 +0000)]
[omap24xx] use the same description as other omap platforms (without the dash)

SVN-Revision: 32907

8 years ago[kernel] refresh pwm patch
John Crispin [Sun, 29 Jul 2012 11:53:06 +0000 (11:53 +0000)]
[kernel] refresh pwm patch

SVN-Revision: 32905

8 years ago[acx-mac80211] dont build on arm as kernel headers are missing/have a different layout
John Crispin [Sun, 29 Jul 2012 09:07:47 +0000 (09:07 +0000)]
[acx-mac80211] dont build on arm as kernel headers are missing/have a different layout

SVN-Revision: 32904

8 years ago[include] fix up scons vs ccache
John Crispin [Sat, 28 Jul 2012 21:06:59 +0000 (21:06 +0000)]
[include] fix up scons vs ccache

SVN-Revision: 32902

8 years ago[kernel] clean up pwm patches and drivers
John Crispin [Sat, 28 Jul 2012 20:47:08 +0000 (20:47 +0000)]
[kernel] clean up pwm patches and drivers

SVN-Revision: 32901

8 years ago[kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood build
Hauke Mehrtens [Sat, 28 Jul 2012 11:36:52 +0000 (11:36 +0000)]
[kernel] add config option CONFIG_I2C_MV64XXX to fix kirkwood build

SVN-Revision: 32898

8 years ago[realview] resync config
Florian Fainelli [Fri, 27 Jul 2012 15:35:15 +0000 (15:35 +0000)]
[realview] resync config

SVN-Revision: 32895

8 years ago[brcm63xx] fix DVA-G3810BN image generation
Florian Fainelli [Fri, 27 Jul 2012 15:35:12 +0000 (15:35 +0000)]
[brcm63xx] fix DVA-G3810BN image generation

Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32894

8 years ago[brcm63xx] add D-link DVA-G3810BN-TL-1 support
Florian Fainelli [Fri, 27 Jul 2012 15:35:09 +0000 (15:35 +0000)]
[brcm63xx] add D-link DVA-G3810BN-TL-1 support

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>
SVN-Revision: 32893

8 years ago[brcm63xx] Add CT6376-1 board support
Florian Fainelli [Fri, 27 Jul 2012 15:35:05 +0000 (15:35 +0000)]
[brcm63xx] Add CT6376-1 board support

Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32892

8 years ago[package] base-files: fix detection of standalone ldd
Florian Fainelli [Fri, 27 Jul 2012 15:35:00 +0000 (15:35 +0000)]
[package] base-files: fix detection of standalone ldd

When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 32891

8 years ago[brcm63xx] Add brcmsmac profile
Florian Fainelli [Fri, 27 Jul 2012 15:34:57 +0000 (15:34 +0000)]
[brcm63xx] Add brcmsmac profile

Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 32890

8 years ago[mac80211] mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds
John Crispin [Fri, 27 Jul 2012 08:30:05 +0000 (08:30 +0000)]
[mac80211] mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds

SVN-Revision: 32886

8 years ago[atheros] Add leds back after migration to sysfs
John Crispin [Thu, 26 Jul 2012 17:06:55 +0000 (17:06 +0000)]
[atheros] Add leds back after migration to sysfs

atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 32885

8 years ago[brcm2708] add more missing config symbols
Florian Fainelli [Thu, 26 Jul 2012 17:03:08 +0000 (17:03 +0000)]
[brcm2708] add more missing config symbols

SVN-Revision: 32884

8 years ago[generic] add more USB-related config symbols
Florian Fainelli [Thu, 26 Jul 2012 17:03:05 +0000 (17:03 +0000)]
[generic] add more USB-related config symbols

SVN-Revision: 32883

8 years ago[ep93xx] make sure target modules depend on the target
Florian Fainelli [Thu, 26 Jul 2012 17:03:02 +0000 (17:03 +0000)]
[ep93xx] make sure target modules depend on the target

SVN-Revision: 32882

8 years ago[kernel] bcma: update to version from wireless-testing tag master-2012-07-16
Hauke Mehrtens [Thu, 26 Jul 2012 15:42:18 +0000 (15:42 +0000)]
[kernel] bcma: update to version from wireless-testing tag master-2012-07-16

I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880

8 years ago[package] make kmod-mvsas depend on x86 since it fails building on other targets...
Florian Fainelli [Thu, 26 Jul 2012 09:29:22 +0000 (09:29 +0000)]
[package] make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx)

SVN-Revision: 32878

8 years ago[ar71xx] fix typo in modules.mk
John Crispin [Wed, 25 Jul 2012 19:52:30 +0000 (19:52 +0000)]
[ar71xx] fix typo in modules.mk

This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 32870

8 years ago[package] make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
Florian Fainelli [Wed, 25 Jul 2012 19:36:19 +0000 (19:36 +0000)]
[package] make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly

SVN-Revision: 32869

8 years agomtd: fix trx_fixup
Felix Fietkau [Wed, 25 Jul 2012 17:28:32 +0000 (17:28 +0000)]
mtd: fix trx_fixup

With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'.  Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem.  I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.

Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 32866

8 years ago[ppc40x] move isp116x driver to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:45 +0000 (15:50 +0000)]
[ppc40x] move isp116x driver to target specific modules.mk

SVN-Revision: 32865

8 years ago[ramips] move rt305x-dwc driver to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:42 +0000 (15:50 +0000)]
[ramips] move rt305x-dwc driver to target specific modules.mk

SVN-Revision: 32864

8 years ago[brcm47xx] move ubsec-ssb driver to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:38 +0000 (15:50 +0000)]
[brcm47xx] move ubsec-ssb driver to target specific modules.mk

SVN-Revision: 32863

8 years ago[brcm47xx] move ssb-gige to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:36 +0000 (15:50 +0000)]
[brcm47xx] move ssb-gige to target specific modules.mk

SVN-Revision: 32862

8 years ago[brcm47xx] move usb driver to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:33 +0000 (15:50 +0000)]
[brcm47xx] move usb driver to target specific modules.mk

SVN-Revision: 32861

8 years ago[package] kmod-r6040 depends on PCI_SUPPORT
Florian Fainelli [Wed, 25 Jul 2012 15:50:29 +0000 (15:50 +0000)]
[package] kmod-r6040 depends on PCI_SUPPORT

SVN-Revision: 32860

8 years ago[avr32] move mmc driver to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:26 +0000 (15:50 +0000)]
[avr32] move mmc driver to target specific modules.mk

SVN-Revision: 32859

8 years ago[ixp4xx] move ixp4xx-eth to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:23 +0000 (15:50 +0000)]
[ixp4xx] move ixp4xx-eth to target specific modules.mk

SVN-Revision: 32858

8 years ago[package] kmod-gpio-nxp74hc164 is not brcm63xx specific
Florian Fainelli [Wed, 25 Jul 2012 15:50:20 +0000 (15:50 +0000)]
[package] kmod-gpio-nxp74hc164 is not brcm63xx specific

SVN-Revision: 32857

8 years ago[ixp4xx] move crypto module to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:16 +0000 (15:50 +0000)]
[ixp4xx] move crypto module to target specific modules.mk

SVN-Revision: 32856

8 years ago[octeon] move i2c driver to target modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:13 +0000 (15:50 +0000)]
[octeon] move i2c driver to target modules.mk

SVN-Revision: 32855

8 years ago[ar71xx] move watchdog driver to target specific modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:10 +0000 (15:50 +0000)]
[ar71xx] move watchdog driver to target specific modules.mk

SVN-Revision: 32854

8 years ago[ar71xx] move target specific spi modules
Florian Fainelli [Wed, 25 Jul 2012 15:50:04 +0000 (15:50 +0000)]
[ar71xx] move target specific spi modules

SVN-Revision: 32853

8 years ago[ar71xx] move target specific leds modules to ar71xx modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:50:02 +0000 (15:50 +0000)]
[ar71xx] move target specific leds modules to ar71xx modules.mk

SVN-Revision: 32852

8 years ago[x86] move leds modules back to target modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:49:57 +0000 (15:49 +0000)]
[x86] move leds modules back to target modules.mk

SVN-Revision: 32851

8 years ago[x86] move i2c modules back to target modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:49:54 +0000 (15:49 +0000)]
[x86] move i2c modules back to target modules.mk

SVN-Revision: 32850

8 years ago[package] fix network devices modules to depend on PCI instead of x86
Florian Fainelli [Wed, 25 Jul 2012 15:49:52 +0000 (15:49 +0000)]
[package] fix network devices modules to depend on PCI instead of x86

SVN-Revision: 32849

8 years ago[x86] move more x86-specific modules back to target modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:49:49 +0000 (15:49 +0000)]
[x86] move more x86-specific modules back to target modules.mk

SVN-Revision: 32848

8 years ago[package] fix libsas and mvsas dependencies against PCI and not x86
Florian Fainelli [Wed, 25 Jul 2012 15:49:46 +0000 (15:49 +0000)]
[package] fix libsas and mvsas dependencies against PCI and not x86

SVN-Revision: 32847

8 years ago[x86] move x86 specific ide/pata modules to x86' modules.mk
Florian Fainelli [Wed, 25 Jul 2012 15:49:42 +0000 (15:49 +0000)]
[x86] move x86 specific ide/pata modules to x86' modules.mk

SVN-Revision: 32846

8 years agobrcm47xx: reorder patches so that the patches already in mainline linux will be appli...
Hauke Mehrtens [Wed, 25 Jul 2012 14:52:00 +0000 (14:52 +0000)]
brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first.

SVN-Revision: 32845

8 years ago[kernel] add yet another framebuffer symbol
Florian Fainelli [Wed, 25 Jul 2012 14:01:57 +0000 (14:01 +0000)]
[kernel] add yet another framebuffer symbol

SVN-Revision: 32844

8 years ago[package] split framebuffer helper modules to their own packages
Florian Fainelli [Wed, 25 Jul 2012 14:01:54 +0000 (14:01 +0000)]
[package] split framebuffer helper modules to their own packages

SVN-Revision: 32843

8 years ago[cobalt] remove broken flag
Florian Fainelli [Wed, 25 Jul 2012 14:01:51 +0000 (14:01 +0000)]
[cobalt] remove broken flag

SVN-Revision: 32842

8 years ago[cobalt] package buttons driver separately
Florian Fainelli [Wed, 25 Jul 2012 14:01:49 +0000 (14:01 +0000)]
[cobalt] package buttons driver separately

SVN-Revision: 32841

8 years ago[cobalt] package cobalt lcd as a module
Florian Fainelli [Wed, 25 Jul 2012 14:01:46 +0000 (14:01 +0000)]
[cobalt] package cobalt lcd as a module

SVN-Revision: 32840

8 years ago[include] use autoreconf hook instead of manual call
John Crispin [Wed, 25 Jul 2012 10:34:06 +0000 (10:34 +0000)]
[include] use autoreconf hook instead of manual call

SVN-Revision: 32837

8 years ago[kernel] add unset CONFIG_FB_XGI to fix fullbuilds
John Crispin [Wed, 25 Jul 2012 09:05:23 +0000 (09:05 +0000)]
[kernel] add unset CONFIG_FB_XGI to fix fullbuilds

SVN-Revision: 32836

8 years ago[brcm2708] cleanup config-3.3, remove =m
John Crispin [Wed, 25 Jul 2012 09:05:18 +0000 (09:05 +0000)]
[brcm2708] cleanup config-3.3, remove =m

SVN-Revision: 32835

8 years ago[cns3xx] laguna: fix eeprom read buffer size during platform configuration
John Crispin [Wed, 25 Jul 2012 08:01:38 +0000 (08:01 +0000)]
[cns3xx] laguna: fix eeprom read buffer size during platform configuration

Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>
SVN-Revision: 32833

8 years ago[compcache] fixes build for 3.x kernel and remove old 2.6.x references
John Crispin [Tue, 24 Jul 2012 23:07:35 +0000 (23:07 +0000)]
[compcache] fixes build for 3.x kernel and remove old 2.6.x references

Signed-off-by: christoph.thielecke@gmx.de
SVN-Revision: 32832

8 years ago[include] package-version-override always calls autoreconf
John Crispin [Tue, 24 Jul 2012 23:07:30 +0000 (23:07 +0000)]
[include] package-version-override always calls autoreconf

make it conditional on the existance of autoreconf

Signed-off-by: Ryan Nowakowski <tubaman@fattuba.com>
SVN-Revision: 32831

8 years agomac80211/hostapd: add support for HT capa in case of IBSS/RSN
John Crispin [Tue, 24 Jul 2012 23:07:25 +0000 (23:07 +0000)]
mac80211/hostapd: add support for HT capa in case of IBSS/RSN

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32830

8 years agowpa_supplicant: add more parameters
John Crispin [Tue, 24 Jul 2012 23:07:15 +0000 (23:07 +0000)]
wpa_supplicant: add more parameters

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32829

8 years agohostapd: add pending patches
John Crispin [Tue, 24 Jul 2012 23:07:10 +0000 (23:07 +0000)]
hostapd: add pending patches

add patched needed to pass more parameters to the IBSS JOIN command

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32828

8 years ago[brcm2708] adds target used by rapsberry pi
John Crispin [Tue, 24 Jul 2012 20:39:17 +0000 (20:39 +0000)]
[brcm2708] adds target used by rapsberry pi

Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
SVN-Revision: 32825

8 years ago[tools] add mktools and dosfstools which are needed for the raspberry pi
John Crispin [Tue, 24 Jul 2012 20:39:00 +0000 (20:39 +0000)]
[tools] add mktools and dosfstools which are needed for the raspberry pi

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>
SVN-Revision: 32824

8 years ago[ramips] DWC otg usb: compilation fixes and trivial bugfix in slave mode
John Crispin [Tue, 24 Jul 2012 20:38:55 +0000 (20:38 +0000)]
[ramips] DWC otg usb: compilation fixes and trivial bugfix in slave mode

Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>
SVN-Revision: 32823

8 years ago[tools] adds mkdapimg
John Crispin [Tue, 24 Jul 2012 20:38:49 +0000 (20:38 +0000)]
[tools] adds mkdapimg

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32822

8 years ago[ramips] D-Link DAP-1350 initial support
John Crispin [Tue, 24 Jul 2012 20:38:43 +0000 (20:38 +0000)]
[ramips] D-Link DAP-1350 initial support

The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32821

8 years ago[ixp4xx] MI424WR - add rev D support
John Crispin [Tue, 24 Jul 2012 20:38:36 +0000 (20:38 +0000)]
[ixp4xx] MI424WR - add rev D support

Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>
SVN-Revision: 32820

8 years ago[ramips] initial LED configuration for Fonera 2.0n
John Crispin [Tue, 24 Jul 2012 20:38:31 +0000 (20:38 +0000)]
[ramips] initial LED configuration for Fonera 2.0n

Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>
SVN-Revision: 32819

8 years ago[mountd] ext4 support
John Crispin [Tue, 24 Jul 2012 20:38:26 +0000 (20:38 +0000)]
[mountd] ext4 support

This patch adds the ext4 filesystem support to mountd. Tested with ext2, ext3
and ext4 partitions.

Signed-off-by: Jaroslaw Swierczynski <jarek1701@gmail.com>
SVN-Revision: 32818

8 years ago[mac80211] add support for Rt3352 in rt2x00 driver
John Crispin [Tue, 24 Jul 2012 20:38:20 +0000 (20:38 +0000)]
[mac80211] add support for Rt3352 in rt2x00 driver

Forgot to do make package/mac80211/update, so the previously posted patch wasn't
in sync with compat-wireless. Now fixed.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32817

8 years ago[ramips] add ALL5002 userspace support
John Crispin [Tue, 24 Jul 2012 20:38:14 +0000 (20:38 +0000)]
[ramips] add ALL5002 userspace support

detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32816

8 years ago[ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.
John Crispin [Tue, 24 Jul 2012 20:38:08 +0000 (20:38 +0000)]
[ramips] enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F.

Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32815

8 years ago[ramips] add image build for ALL5002
John Crispin [Tue, 24 Jul 2012 20:38:03 +0000 (20:38 +0000)]
[ramips] add image build for ALL5002

add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32814

8 years ago[ramips] add support for Allnet ALL5002 to kernel
John Crispin [Tue, 24 Jul 2012 20:37:56 +0000 (20:37 +0000)]
[ramips] add support for Allnet ALL5002 to kernel

support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32813

8 years ago[ramips] uart_clk on Rt3352F is always 40MHz
John Crispin [Tue, 24 Jul 2012 20:37:50 +0000 (20:37 +0000)]
[ramips] uart_clk on Rt3352F is always 40MHz

Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 32812

8 years ago[package] orion_wdt is also available on kirkwood
Florian Fainelli [Tue, 24 Jul 2012 19:43:58 +0000 (19:43 +0000)]
[package] orion_wdt is also available on kirkwood

SVN-Revision: 32811

8 years ago[omap24xx] move omap specific modules to modules.mk
Florian Fainelli [Tue, 24 Jul 2012 19:43:54 +0000 (19:43 +0000)]
[omap24xx] move omap specific modules to modules.mk

SVN-Revision: 32810

8 years ago[omap24x] move n810 battery module to omap24 modules.mk
Florian Fainelli [Tue, 24 Jul 2012 19:43:49 +0000 (19:43 +0000)]
[omap24x] move n810 battery module to omap24 modules.mk

SVN-Revision: 32809

8 years ago[omap24x] move target specific modules to target's module.mk
Florian Fainelli [Tue, 24 Jul 2012 19:43:45 +0000 (19:43 +0000)]
[omap24x] move target specific modules to target's module.mk

SVN-Revision: 32808

8 years ago[ep93xx] package ep93xx framebuffer
Florian Fainelli [Tue, 24 Jul 2012 19:43:35 +0000 (19:43 +0000)]
[ep93xx] package ep93xx framebuffer

SVN-Revision: 32807

8 years ago[ep93xx] remove crypto symbols override
Florian Fainelli [Tue, 24 Jul 2012 19:43:31 +0000 (19:43 +0000)]
[ep93xx] remove crypto symbols override

SVN-Revision: 32806

8 years ago[package] create kmod-fb and update xen framebuffer module
Florian Fainelli [Tue, 24 Jul 2012 19:43:27 +0000 (19:43 +0000)]
[package] create kmod-fb and update xen framebuffer module

SVN-Revision: 32805

8 years ago[generic] add missing framebuffer related symbols
Florian Fainelli [Tue, 24 Jul 2012 19:43:23 +0000 (19:43 +0000)]
[generic] add missing framebuffer related symbols

SVN-Revision: 32804

8 years ago[ep93xx] remove broken flag, since it works
Florian Fainelli [Tue, 24 Jul 2012 19:43:19 +0000 (19:43 +0000)]
[ep93xx] remove broken flag, since it works

SVN-Revision: 32803

8 years ago[ep93xx] fix sound modules loading order and dependencies
Florian Fainelli [Tue, 24 Jul 2012 19:43:15 +0000 (19:43 +0000)]
[ep93xx] fix sound modules loading order and dependencies

SVN-Revision: 32802

8 years ago[package] add sound-soc-ac97 package
Florian Fainelli [Tue, 24 Jul 2012 19:43:10 +0000 (19:43 +0000)]
[package] add sound-soc-ac97 package

SVN-Revision: 32801

8 years ago[package] add kmod-regmap including both i2c and spi modules
Florian Fainelli [Tue, 24 Jul 2012 19:43:06 +0000 (19:43 +0000)]
[package] add kmod-regmap including both i2c and spi modules

This is required for quite SoC sound support

SVN-Revision: 32800

8 years ago[ep93xx] package ep93xx touchscreen driver as a module
Florian Fainelli [Tue, 24 Jul 2012 19:42:49 +0000 (19:42 +0000)]
[ep93xx] package ep93xx touchscreen driver as a module

SVN-Revision: 32799

8 years ago[ep93xx] set DEVICE_TYPE to developerboard
Florian Fainelli [Tue, 24 Jul 2012 19:42:44 +0000 (19:42 +0000)]
[ep93xx] set DEVICE_TYPE to developerboard

SVN-Revision: 32798

8 years ago[lantiq] rebase config-3.3
John Crispin [Tue, 24 Jul 2012 17:28:25 +0000 (17:28 +0000)]
[lantiq] rebase config-3.3

SVN-Revision: 32797

8 years ago[generic] fix tantos patch properly
John Crispin [Tue, 24 Jul 2012 17:28:12 +0000 (17:28 +0000)]
[generic] fix tantos patch properly

SVN-Revision: 32796

8 years ago[generic] make tantos switch select ETHERNET_PACKET_MANGLE
John Crispin [Tue, 24 Jul 2012 16:50:14 +0000 (16:50 +0000)]
[generic] make tantos switch select ETHERNET_PACKET_MANGLE

SVN-Revision: 32795

8 years ago[lantiq] move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file
John Crispin [Tue, 24 Jul 2012 15:33:01 +0000 (15:33 +0000)]
[lantiq] move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file

This broke falcon builds

SVN-Revision: 32794

8 years agoath5k: add tx power related fixes
Felix Fietkau [Mon, 23 Jul 2012 22:20:57 +0000 (22:20 +0000)]
ath5k: add tx power related fixes

SVN-Revision: 32793

8 years agoRevert "[package] kernel/modules: dont only change loading order on IPSEC*-m, propaga...
Vasilis Tsiligiannis [Mon, 23 Jul 2012 19:17:05 +0000 (19:17 +0000)]
Revert "[package] kernel/modules: dont only change loading order on IPSEC*-m, propagate this to documentation too"

Preserve alphabetical order on KCONFIG and description for consistency with other module packages

This reverts commit r32775.

SVN-Revision: 32791

8 years agobuild: ensure that reordering of KCONFIG lines are handled properly and that the...
Felix Fietkau [Sun, 22 Jul 2012 21:00:07 +0000 (21:00 +0000)]
build: ensure that reordering of KCONFIG lines are handled properly and that the final result does not depend on the package scan order

SVN-Revision: 32788

8 years ago[kernel] crashlog: fix dependency, add memblock support
Felix Fietkau [Sun, 22 Jul 2012 16:39:33 +0000 (16:39 +0000)]
[kernel] crashlog: fix dependency, add memblock support

SVN-Revision: 32787

8 years ago[package] owipcalc: fix output formatting quirks
Jo-Philipp Wich [Fri, 20 Jul 2012 15:05:30 +0000 (15:05 +0000)]
[package] owipcalc: fix output formatting quirks

SVN-Revision: 32786

8 years ago[package] owipcalc: add new operations "next", "prev", "6to4" and "pop", implement...
Jo-Philipp Wich [Fri, 20 Jul 2012 13:43:10 +0000 (13:43 +0000)]
[package] owipcalc: add new operations "next", "prev", "6to4" and "pop", implement a stack for intermediate results

SVN-Revision: 32785

8 years agogrub: replace an unnecessary piece of inline assembly that breaks the build on recent...
Felix Fietkau [Fri, 20 Jul 2012 12:28:54 +0000 (12:28 +0000)]
grub: replace an unnecessary piece of inline assembly that breaks the build on recent mac os x

SVN-Revision: 32784

8 years agokernel: fix portability issues on the x86 specific relocs host tool, fixes build...
Felix Fietkau [Fri, 20 Jul 2012 12:28:50 +0000 (12:28 +0000)]
kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x

SVN-Revision: 32783

8 years ago[package] owipcalc: add "prefix" operation to set prefix of base address during calcu...
Jo-Philipp Wich [Thu, 19 Jul 2012 19:51:53 +0000 (19:51 +0000)]
[package] owipcalc: add "prefix" operation to set prefix of base address during calculation

SVN-Revision: 32782

8 years ago[package] dnsmasq: Fix DHCP no address on interface warning (#10570)
Vasilis Tsiligiannis [Thu, 19 Jul 2012 19:12:54 +0000 (19:12 +0000)]
[package] dnsmasq: Fix DHCP no address on interface warning (#10570)

SVN-Revision: 32781