openwrt/svn-archive/archive.git
11 years agoar71xx: add kernel support for the TL-WDR3500 board
Gabor Juhos [Fri, 1 Feb 2013 15:50:29 +0000 (15:50 +0000)]
ar71xx: add kernel support for the TL-WDR3500 board

WDR3500 is similar to WDR3600 except it doesn't have gigabit ethernet,
and has only 1 USB port.

Pending issues:

  * Leds are not working at all (except power and wlan_5g)
  * LAN switch ethernet ports are reversed with respect to case label.

  [Label] -> soft device
  [LAN1] -> eth0.4
  [LAN2] -> eth0.3
  [LAN3] -> eth0.2
  [LAN4] -> eth0.1

Based on http://patchwork.openwrt.org/patch/3208/

Thanks-to: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gui Iribarren <gui@altermundi.net>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35423

11 years agoodhcp6c: allow IPv6-config via SLAAC-only if no prefix is requested
Steven Barth [Fri, 1 Feb 2013 13:38:47 +0000 (13:38 +0000)]
odhcp6c: allow IPv6-config via SLAAC-only if no prefix is requested

SVN-Revision: 35421

11 years agonetifd: Improved IPv6 featureset
Steven Barth [Fri, 1 Feb 2013 12:28:43 +0000 (12:28 +0000)]
netifd: Improved IPv6 featureset
* Fix reloading of ula-prefixes
* Added support for temporary addresses and routes
* Added support for offlink addresses
* Improved status-output for assigned prefixes

SVN-Revision: 35420

11 years agoodhcp6c: switch to userspace RA-handling and offload address assignment to netifd
Steven Barth [Fri, 1 Feb 2013 12:28:39 +0000 (12:28 +0000)]
odhcp6c: switch to userspace RA-handling and offload address assignment to netifd

SVN-Revision: 35419

11 years ago6relayd: Fix announced router flags and IPv6 procfs-configuration
Steven Barth [Fri, 1 Feb 2013 12:28:34 +0000 (12:28 +0000)]
6relayd: Fix announced router flags and IPv6 procfs-configuration

SVN-Revision: 35418

11 years agobase-files: Fix IPv6 early sysctls again
Steven Barth [Fri, 1 Feb 2013 12:28:24 +0000 (12:28 +0000)]
base-files: Fix IPv6 early sysctls again
* Kernel IPv6 /proc interface inconsistency caused races

SVN-Revision: 35417

11 years agoopenvpn: add from openvpn-devel from /packages, fix support for current polarssl
Felix Fietkau [Wed, 30 Jan 2013 20:07:15 +0000 (20:07 +0000)]
openvpn: add from openvpn-devel from /packages, fix support for current polarssl

SVN-Revision: 35412

11 years agopolarssl: add from /packages, update to 1.2.4, fix openssl compatibility
Felix Fietkau [Wed, 30 Jan 2013 20:07:04 +0000 (20:07 +0000)]
polarssl: add from /packages, update to 1.2.4, fix openssl compatibility

SVN-Revision: 35411

11 years agomove lzo from /packages to trunk
Felix Fietkau [Wed, 30 Jan 2013 19:52:03 +0000 (19:52 +0000)]
move lzo from /packages to trunk

SVN-Revision: 35410

11 years ago6in4: fix typo in last commit
Steven Barth [Wed, 30 Jan 2013 09:07:23 +0000 (09:07 +0000)]
6in4: fix typo in last commit

SVN-Revision: 35409

11 years ago6in4: work around hanging wget process
Steven Barth [Wed, 30 Jan 2013 09:05:53 +0000 (09:05 +0000)]
6in4: work around hanging wget process

SVN-Revision: 35408

11 years agobcm63xx: replace kmod-switch with swconfig in default package set
Jonas Gorski [Wed, 30 Jan 2013 00:19:21 +0000 (00:19 +0000)]
bcm63xx: replace kmod-switch with swconfig in default package set

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35407

11 years agotoolchain/gcc: fix the mips64 linker path to be more musl conforming
Florian Fainelli [Tue, 29 Jan 2013 23:05:46 +0000 (23:05 +0000)]
toolchain/gcc: fix the mips64 linker path to be more musl conforming

musl libc does not use /lib32 or /lib64 directories, just /lib

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35406

11 years ago[buildroot] allow using sstrip with musl
Florian Fainelli [Tue, 29 Jan 2013 23:05:43 +0000 (23:05 +0000)]
[buildroot] allow using sstrip with musl

There was no particular reason for it to be disabled so allow it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35405

11 years agotoolchain/musl: add parenthesis to the __ARE_4_EQUAL macro
Florian Fainelli [Tue, 29 Jan 2013 23:05:40 +0000 (23:05 +0000)]
toolchain/musl: add parenthesis to the __ARE_4_EQUAL macro

Fixes warnings exposed by netifd while using IN6_ARE_ADDR_EQUAL turned
into errors.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35404

11 years agoar71xx: add profile and build image for dir-825-c1
Gabor Juhos [Tue, 29 Jan 2013 22:50:57 +0000 (22:50 +0000)]
ar71xx: add profile and build image for dir-825-c1

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35403

11 years agoar71xx: add user space support for dir-825-c1
Gabor Juhos [Tue, 29 Jan 2013 22:50:54 +0000 (22:50 +0000)]
ar71xx: add user space support for dir-825-c1

[juhosg: fix whitespaces in some scripts]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35402

11 years agoar71xx: add kernel support for dir-825-c1
Gabor Juhos [Tue, 29 Jan 2013 22:50:50 +0000 (22:50 +0000)]
ar71xx: add kernel support for dir-825-c1

[juhosg:
 - remove unused GPIO stuff
 - use a separate kernel patch for machine integration]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35401

11 years agolibubox: update to latest version, fixes a string corruption issue on JSON formatting
Felix Fietkau [Tue, 29 Jan 2013 22:23:43 +0000 (22:23 +0000)]
libubox: update to latest version, fixes a string corruption issue on JSON formatting

SVN-Revision: 35399

11 years agogeneric: fix default compression selection in ubifs
Gabor Juhos [Tue, 29 Jan 2013 21:32:22 +0000 (21:32 +0000)]
generic: fix default compression selection in ubifs

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35398

11 years agoar71xx: add profile and generate images for the AP132 board
Gabor Juhos [Tue, 29 Jan 2013 19:12:34 +0000 (19:12 +0000)]
ar71xx: add profile and generate images for the AP132 board

Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35397

11 years agoar71xx: add user-space support for the AP132 board
Gabor Juhos [Tue, 29 Jan 2013 19:12:32 +0000 (19:12 +0000)]
ar71xx: add user-space support for the AP132 board

Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35396

11 years agoar71xx: add kernel support for Atheros AP132 Reference Board
Gabor Juhos [Tue, 29 Jan 2013 19:12:30 +0000 (19:12 +0000)]
ar71xx: add kernel support for Atheros AP132 Reference Board

Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35395

11 years agoar71xx: fix ethernet device registration for the QCA9556 SoC
Gabor Juhos [Tue, 29 Jan 2013 19:12:28 +0000 (19:12 +0000)]
ar71xx: fix ethernet device registration for the QCA9556 SoC

Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35394

11 years agoar71xx: add kernel support for the QCA9556 SoC
Gabor Juhos [Tue, 29 Jan 2013 19:12:26 +0000 (19:12 +0000)]
ar71xx: add kernel support for the QCA9556 SoC

Based on http://patchwork.openwrt.org/patch/3162/

Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35393

11 years agoar71xx: enable fast flash read on dual-flash devices
Gabor Juhos [Tue, 29 Jan 2013 19:12:25 +0000 (19:12 +0000)]
ar71xx: enable fast flash read on dual-flash devices

This improves flash read speed on various Buffalo units.

mtd_speedtest results on the WZR-HP-AG300H:

                          old         new        delta
eraseblock read speed:  726 KiB/s   2068 KiB/s   +184.85%
page read speed:        699 KiB/s   1973 KiB/s   +182.26%
2 page read speed:      711 KiB/s   2043 KiB/s   +187.34%

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35392

11 years agokernel: update linux 3.7 to 3.7.5
Gabor Juhos [Tue, 29 Jan 2013 18:29:45 +0000 (18:29 +0000)]
kernel: update linux 3.7 to 3.7.5

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35390

11 years agobuild: fix the strip default for musl
Felix Fietkau [Tue, 29 Jan 2013 18:16:55 +0000 (18:16 +0000)]
build: fix the strip default for musl

SVN-Revision: 35389

11 years agoadd libusb-compat
Felix Fietkau [Tue, 29 Jan 2013 16:12:00 +0000 (16:12 +0000)]
add libusb-compat

SVN-Revision: 35387

11 years agonetifd: update to latest version
Felix Fietkau [Tue, 29 Jan 2013 14:40:04 +0000 (14:40 +0000)]
netifd: update to latest version

fixes DNS servers on reload (#12910)
fixes ubus object race on reload or down/up (#12612)

SVN-Revision: 35383

11 years agosamba36: update to 3.6.11 and refresh patches (based on patch from #12914)
Felix Fietkau [Tue, 29 Jan 2013 13:18:56 +0000 (13:18 +0000)]
samba36: update to 3.6.11 and refresh patches (based on patch from #12914)

SVN-Revision: 35382

11 years agousb-modeswitch: split out usb-modeswitch-data again
Felix Fietkau [Tue, 29 Jan 2013 12:27:17 +0000 (12:27 +0000)]
usb-modeswitch: split out usb-modeswitch-data again

SVN-Revision: 35381

11 years agousb-modeswitch: add from /packages, merge usb-modeswitch-data, use libusb-compat...
Felix Fietkau [Tue, 29 Jan 2013 12:02:10 +0000 (12:02 +0000)]
usb-modeswitch: add from /packages, merge usb-modeswitch-data, use libusb-compat, add myself as maintainer

SVN-Revision: 35379

11 years ago[kernel] fix mtd_mp25p80_add_gd25q32_gd25q64.patch
John Crispin [Tue, 29 Jan 2013 11:06:57 +0000 (11:06 +0000)]
[kernel] fix mtd_mp25p80_add_gd25q32_gd25q64.patch

SVN-Revision: 35378

11 years agonetifd: implement IPv6 prefix deprecation according to RFC 6204
Steven Barth [Tue, 29 Jan 2013 11:05:22 +0000 (11:05 +0000)]
netifd: implement IPv6 prefix deprecation according to RFC 6204

SVN-Revision: 35377

11 years agomove a few packages to system/utils
Felix Fietkau [Tue, 29 Jan 2013 10:48:46 +0000 (10:48 +0000)]
move a few packages to system/utils

SVN-Revision: 35375

11 years agousbutils: add from /packages, clean up, add myself as maintainer
Felix Fietkau [Tue, 29 Jan 2013 10:48:41 +0000 (10:48 +0000)]
usbutils: add from /packages, clean up, add myself as maintainer

SVN-Revision: 35374

11 years agolibusb: add from /packages, add myself as maintainer
Felix Fietkau [Tue, 29 Jan 2013 10:48:37 +0000 (10:48 +0000)]
libusb: add from /packages, add myself as maintainer

SVN-Revision: 35373

11 years ago6relayd: remove IPv6 forwarding-sysctl workaround
Steven Barth [Tue, 29 Jan 2013 10:13:49 +0000 (10:13 +0000)]
6relayd: remove IPv6 forwarding-sysctl workaround

SVN-Revision: 35371

11 years agoodhcp6c: remove IPv6 forwarding-sysctl workaround
Steven Barth [Tue, 29 Jan 2013 10:13:44 +0000 (10:13 +0000)]
odhcp6c: remove IPv6 forwarding-sysctl workaround

SVN-Revision: 35370

11 years agonetifd: remove IPv6 forwarding-sysctl workaround
Steven Barth [Tue, 29 Jan 2013 10:13:39 +0000 (10:13 +0000)]
netifd: remove IPv6 forwarding-sysctl workaround

SVN-Revision: 35369

11 years agobase-files: Fix race-conditions with IPv6 sysctls
Steven Barth [Tue, 29 Jan 2013 10:13:33 +0000 (10:13 +0000)]
base-files: Fix race-conditions with IPv6 sysctls

SVN-Revision: 35368

11 years ago[generic] Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit
Florian Fainelli [Tue, 29 Jan 2013 09:46:11 +0000 (09:46 +0000)]
[generic] Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit

Fix GigaDevice GD25Q32/GD25Q64 SPI Flash bad commit.

The patch was added to "linux/generic/patches-3.6" instead of
"target/linux/generic/patches-3.6".
I also fixed a missing patch space and refreshed generic patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35367

11 years agogeneric: fix build failure in MIPS kexec code if SMP is enabled
Gabor Juhos [Tue, 29 Jan 2013 09:44:58 +0000 (09:44 +0000)]
generic: fix build failure in MIPS kexec code if SMP is enabled

Fix it for older kernels as well.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35366

11 years agoar71xx: add TP-LINK WA-801ND to run-time model detection
Gabor Juhos [Tue, 29 Jan 2013 09:40:29 +0000 (09:40 +0000)]
ar71xx: add TP-LINK WA-801ND to run-time model detection

A small cosmetic fix to show the HW model name correctly in LuCI.

Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35365

11 years agogeneric: fix build failure in MIPS kexec code if SMP is enabled
Gabor Juhos [Tue, 29 Jan 2013 09:40:23 +0000 (09:40 +0000)]
generic: fix build failure in MIPS kexec code if SMP is enabled

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35364

11 years agonetifd: update to latest version, fixes setting addresses/routes on alias interfaces
Felix Fietkau [Mon, 28 Jan 2013 20:35:55 +0000 (20:35 +0000)]
netifd: update to latest version, fixes setting addresses/routes on alias interfaces

SVN-Revision: 35362

11 years ago[kernel] Add support for GigaDevice GD25Q32/GD25Q64 SPI Flash in m25p80.c
John Crispin [Mon, 28 Jan 2013 19:10:21 +0000 (19:10 +0000)]
[kernel] Add support for GigaDevice GD25Q32/GD25Q64 SPI Flash in m25p80.c

Add support for GigaDevice GD25Q32 32 Mbit (4 MB) SPI Flash (see datasheet: http://www.gigadevice.com/UserFiles/GD25Q32_Rev0.2(1).pdf) used in Hame MPR-A1 and clones and for GigaDevice GD25Q64 64 Mbit (8 MB) SPI Flash used in Hame MPR-A2 devices (datasheet: http://www.gigadevice.com/UserFiles/GD25Q64.pdf).

Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Patchwork: http://patchwork.openwrt.org/patch/3120/

SVN-Revision: 35361

11 years ago[kernel] package ncm & qmi wwan
John Crispin [Mon, 28 Jan 2013 18:20:10 +0000 (18:20 +0000)]
[kernel] package ncm & qmi wwan

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3134/

SVN-Revision: 35360

11 years ago[ramips] fix for non-blinking LAN LEDs
John Crispin [Mon, 28 Jan 2013 18:06:31 +0000 (18:06 +0000)]
[ramips] fix for non-blinking LAN LEDs

https://dev.openwrt.org/ticket/12830

SVN-Revision: 35359

11 years agohostapd: don't configure wpa_supplicant with empty password="" if no password is...
Jo-Philipp Wich [Mon, 28 Jan 2013 18:05:33 +0000 (18:05 +0000)]
hostapd: don't configure wpa_supplicant with empty password="" if no password is specified (#12912)

SVN-Revision: 35358

11 years ago[lantiq] dont load gptu on ase
John Crispin [Mon, 28 Jan 2013 17:46:07 +0000 (17:46 +0000)]
[lantiq] dont load gptu on ase

fixes #12792

SVN-Revision: 35357

11 years agoramips: reset switch on single-port devices
John Crispin [Mon, 28 Jan 2013 17:44:41 +0000 (17:44 +0000)]
ramips: reset switch on single-port devices

Signed-off-by: Daniel Gole <dgolle@allnet.de>
SVN-Revision: 35356

11 years ago[lantiq] refresh patches
John Crispin [Mon, 28 Jan 2013 17:44:20 +0000 (17:44 +0000)]
[lantiq] refresh patches

SVN-Revision: 35355

11 years ago[lantiq] Fix ARV7518 USB
John Crispin [Mon, 28 Jan 2013 17:43:35 +0000 (17:43 +0000)]
[lantiq] Fix ARV7518 USB

This patch correctly fixes USB on Lantiq ARV7518.
There was a failed attempt on fixing this on r35077 (https://dev.openwrt.org/changeset/35077/).

Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35354

11 years ago[lantiq] Add ath9k eeprom and pci fixup support
John Crispin [Mon, 28 Jan 2013 17:43:25 +0000 (17:43 +0000)]
[lantiq] Add ath9k eeprom and pci fixup support

Add ath9k eeprom and pci fixup support (again) for linux 3.7.

On linux 3.3, the fixup forced the regdomain to 0x67, causing low TX power.
This patch only corrects checksum, the rest of the EEPROM isn't changed.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35353

11 years ago[lantiq] Add support for ARV4518PW R01 and rename R01A.
John Crispin [Mon, 28 Jan 2013 17:42:59 +0000 (17:42 +0000)]
[lantiq] Add support for ARV4518PW R01 and rename R01A.

There are two different versions of SMC7908A-ISP: R01 and R01A.
R01 has an internal clock for PCI, meanwhile R01A has an external clock.

This fixes: https://dev.openwrt.org/ticket/12884

Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 35352

11 years agoscripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries
Jo-Philipp Wich [Mon, 28 Jan 2013 15:54:27 +0000 (15:54 +0000)]
scripts: bundle-libraries.sh: support mixing 32bit and 64bit binaries

SVN-Revision: 35349

11 years agofirewall: flush conntrack table after changing interface rules
Jo-Philipp Wich [Mon, 28 Jan 2013 15:53:44 +0000 (15:53 +0000)]
firewall: flush conntrack table after changing interface rules

SVN-Revision: 35348

11 years agonetifd: IPv6 sysctl, restart IPv6 in static mode to send RS
Steven Barth [Mon, 28 Jan 2013 14:07:27 +0000 (14:07 +0000)]
netifd: IPv6 sysctl, restart IPv6 in static mode to send RS

SVN-Revision: 35347

11 years agonetifd: add SLAAC ipv6 value for static-proto
Steven Barth [Mon, 28 Jan 2013 13:53:48 +0000 (13:53 +0000)]
netifd: add SLAAC ipv6 value for static-proto

SVN-Revision: 35346

11 years agoodhcp6c: work-around for proto-script to avoid loosing the default route
Steven Barth [Mon, 28 Jan 2013 13:53:43 +0000 (13:53 +0000)]
odhcp6c: work-around for proto-script to avoid loosing the default route

SVN-Revision: 35345

11 years agobase-files: remove IPv6-forwarding setting for all interfaces
Steven Barth [Mon, 28 Jan 2013 13:53:38 +0000 (13:53 +0000)]
base-files: remove IPv6-forwarding setting for all interfaces

SVN-Revision: 35344

11 years agokernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed
Felix Fietkau [Sun, 27 Jan 2013 23:23:39 +0000 (23:23 +0000)]
kernel: disable CONFIG_CRYPTO_MANAGER2, it is not needed

SVN-Revision: 35342

11 years agobrcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe.
Hauke Mehrtens [Sun, 27 Jan 2013 21:48:28 +0000 (21:48 +0000)]
brcm47xx: load pps_core and ptp before tg3 to make the interface available for failsafe.

SVN-Revision: 35341

11 years agokernel: b53: the b53 spi driver depends on spi
Hauke Mehrtens [Sun, 27 Jan 2013 21:39:53 +0000 (21:39 +0000)]
kernel: b53: the b53 spi driver depends on spi

SVN-Revision: 35340

11 years agokernel: make usb2-pci depend on usb2 and not the other way around
Hauke Mehrtens [Sun, 27 Jan 2013 21:28:26 +0000 (21:28 +0000)]
kernel: make usb2-pci depend on usb2 and not the other way around

SVN-Revision: 35339

11 years agokernel: activate input-matrixkmap for kernel 3.8
Hauke Mehrtens [Sun, 27 Jan 2013 21:23:33 +0000 (21:23 +0000)]
kernel: activate input-matrixkmap for kernel 3.8

SVN-Revision: 35338

11 years agokernel: add ehci-platform.ko and ehci-pci.ko when build with kernel 3.8
Hauke Mehrtens [Sun, 27 Jan 2013 21:19:48 +0000 (21:19 +0000)]
kernel: add ehci-platform.ko and ehci-pci.ko when build with kernel 3.8

SVN-Revision: 35337

11 years agokernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8
Hauke Mehrtens [Sun, 27 Jan 2013 21:18:52 +0000 (21:18 +0000)]
kernel: add packages for pps and ptp, they are needed by tg3 in kernel 3.8

SVN-Revision: 35336

11 years agokernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
Hauke Mehrtens [Sun, 27 Jan 2013 21:17:38 +0000 (21:17 +0000)]
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8

These attributes where removed with kernel 3.8 and are now causing compile errors.

SVN-Revision: 35335

11 years agoacx-mac80211: make it compile with kernel 3.8
Hauke Mehrtens [Sun, 27 Jan 2013 21:16:35 +0000 (21:16 +0000)]
acx-mac80211: make it compile with kernel 3.8

SVN-Revision: 35334

11 years agoacx-mac80211: refresh patches
Hauke Mehrtens [Sun, 27 Jan 2013 21:15:48 +0000 (21:15 +0000)]
acx-mac80211: refresh patches

SVN-Revision: 35333

11 years agoacx-mac80211: use same config options as mac80211 package
Hauke Mehrtens [Sun, 27 Jan 2013 21:15:13 +0000 (21:15 +0000)]
acx-mac80211: use same config options as mac80211 package

Problem was missing CONFIG_MAC80211_DEBUGFS
in the acx-mac80211 build, which broke subsequently the ABI in struct
ieee80211_ops. Defect manifested in failing ieee80211_alloc_hw() and maybe
also in other strange behaviour before.

I added CONFIG_CFG80211_DEBUGFS, CONFIG_MAC80211_DEBUGFS and the same also
for CONFIG_MAC80211_MESH, just to be inline on how it's done currently in
package/mac80211/Makefile.

Thank you Oliver Winker

SVN-Revision: 35332

11 years agonetfilter: add support for flushing conntrack via /proc
Felix Fietkau [Sun, 27 Jan 2013 19:02:38 +0000 (19:02 +0000)]
netfilter: add support for flushing conntrack via /proc

SVN-Revision: 35330

11 years agokernel: clean up crypto kconfig options on 3.8
Felix Fietkau [Sun, 27 Jan 2013 17:49:09 +0000 (17:49 +0000)]
kernel: clean up crypto kconfig options on 3.8

SVN-Revision: 35329

11 years agokernel: remove __devinit, __devexit and __devexit_p for kernel 3.8
Hauke Mehrtens [Sun, 27 Jan 2013 17:48:48 +0000 (17:48 +0000)]
kernel: remove __devinit, __devexit and __devexit_p for kernel 3.8

These attributes where removed with kernel 3.8 and are now causing compile errors.

SVN-Revision: 35328

11 years agokernel: clean up crypto related kconfig options
Felix Fietkau [Sun, 27 Jan 2013 17:23:12 +0000 (17:23 +0000)]
kernel: clean up crypto related kconfig options

SVN-Revision: 35327

11 years agoar71xx: disable support for unsupported mtd configuration, saves about 5K kernel...
Felix Fietkau [Sun, 27 Jan 2013 16:38:27 +0000 (16:38 +0000)]
ar71xx: disable support for unsupported mtd configuration, saves about 5K kernel size after lzma

SVN-Revision: 35326

11 years agokernel: prevent cryptomgr from pulling in useless extra dependencies for tests that...
Felix Fietkau [Sun, 27 Jan 2013 16:21:08 +0000 (16:21 +0000)]
kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run

Reduces kernel size after LZMA by about 5k on MIPS

SVN-Revision: 35325

11 years agobrcm47xx: create image for Netgear WNDR3400 V1
Hauke Mehrtens [Sat, 26 Jan 2013 20:34:38 +0000 (20:34 +0000)]
brcm47xx: create image for Netgear WNDR3400 V1

SVN-Revision: 35323

11 years agobrcm47xx: add initial board detection code
Hauke Mehrtens [Sat, 26 Jan 2013 20:34:00 +0000 (20:34 +0000)]
brcm47xx: add initial board detection code

SVN-Revision: 35322

11 years agobrcm47xx: add gpio to irq function again
Hauke Mehrtens [Sat, 26 Jan 2013 20:33:23 +0000 (20:33 +0000)]
brcm47xx: add gpio to irq function again

SVN-Revision: 35321

11 years agokernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
Felix Fietkau [Sat, 26 Jan 2013 16:26:13 +0000 (16:26 +0000)]
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips

in combination with kernel symbol export stripping this significantly reduces
the kernel image size

SVN-Revision: 35320

11 years agokernel: fix module export stripping
Felix Fietkau [Sat, 26 Jan 2013 16:26:04 +0000 (16:26 +0000)]
kernel: fix module export stripping

SVN-Revision: 35319

11 years agokernel: update linux 3.7 to 3.7.4
Gabor Juhos [Thu, 24 Jan 2013 17:08:37 +0000 (17:08 +0000)]
kernel: update linux 3.7 to 3.7.4

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318

11 years agokernel: refresh 3.8 patches
Florian Fainelli [Thu, 24 Jan 2013 17:04:52 +0000 (17:04 +0000)]
kernel: refresh 3.8 patches

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35317

11 years agomvebu: update to 3.8-rc4
Florian Fainelli [Thu, 24 Jan 2013 17:04:46 +0000 (17:04 +0000)]
mvebu: update to 3.8-rc4

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35316

11 years agokernel: add missing config options for 3.8
Hauke Mehrtens [Thu, 24 Jan 2013 14:48:15 +0000 (14:48 +0000)]
kernel: add missing config options for 3.8

SVN-Revision: 35315

11 years agobrcm47xx: change generic profiles
Hauke Mehrtens [Thu, 24 Jan 2013 14:38:10 +0000 (14:38 +0000)]
brcm47xx: change generic profiles

The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.

SVN-Revision: 35314

11 years agokernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
Felix Fietkau [Wed, 23 Jan 2013 16:31:38 +0000 (16:31 +0000)]
kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well

SVN-Revision: 35310

11 years agoar71xx: sync kernel sizes where possible to fix images for some devices (#12874)
Felix Fietkau [Wed, 23 Jan 2013 16:29:25 +0000 (16:29 +0000)]
ar71xx: sync kernel sizes where possible to fix images for some devices (#12874)

SVN-Revision: 35309

11 years agobcm63xx: switch to b53 and swconfig
Jonas Gorski [Wed, 23 Jan 2013 10:12:40 +0000 (10:12 +0000)]
bcm63xx: switch to b53 and swconfig

Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307

11 years agobcm63xx: expose the internal switch to b53
Jonas Gorski [Wed, 23 Jan 2013 10:12:37 +0000 (10:12 +0000)]
bcm63xx: expose the internal switch to b53

Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35306

11 years agogeneric: add b53 swconfig switch driver
Jonas Gorski [Wed, 23 Jan 2013 10:12:33 +0000 (10:12 +0000)]
generic: add b53 swconfig switch driver

Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.

Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35305

11 years agobcm63xx: move bcm63xx-spi into the kernel
Jonas Gorski [Wed, 23 Jan 2013 10:12:13 +0000 (10:12 +0000)]
bcm63xx: move bcm63xx-spi into the kernel

The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35304

11 years agoipv6: remove empty directory
Steven Barth [Wed, 23 Jan 2013 08:16:51 +0000 (08:16 +0000)]
ipv6: remove empty directory

SVN-Revision: 35303

11 years agoipv6-support: don't overwrite existing setting across reflashs
Steven Barth [Wed, 23 Jan 2013 08:15:09 +0000 (08:15 +0000)]
ipv6-support: don't overwrite existing setting across reflashs

SVN-Revision: 35302

11 years agobase-files: fix network_get_prefix6
Steven Barth [Tue, 22 Jan 2013 16:47:16 +0000 (16:47 +0000)]
base-files: fix network_get_prefix6

SVN-Revision: 35300

11 years agobase-files: Set default value for IPv6 forwarding
Steven Barth [Tue, 22 Jan 2013 16:47:09 +0000 (16:47 +0000)]
base-files: Set default value for IPv6 forwarding

SVN-Revision: 35299