openwrt/svn-archive/archive.git
5 years agouboot-lantiq: update to v2013.10
John Crispin [Sat, 12 Apr 2014 21:21:14 +0000 (21:21 +0000)]
uboot-lantiq: update to v2013.10

Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
SVN-Revision: 40482

5 years agoar71xx: build firmware image for the WNDR3700 v4 board
Gabor Juhos [Sat, 12 Apr 2014 20:22:41 +0000 (20:22 +0000)]
ar71xx: build firmware image for the WNDR3700 v4 board

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40481

5 years agoar71xx/image: allow to use more arguments for some macros
Gabor Juhos [Sat, 12 Apr 2014 20:00:37 +0000 (20:00 +0000)]
ar71xx/image: allow to use more arguments for some macros

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40480

5 years agoar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files
Gabor Juhos [Sat, 12 Apr 2014 19:58:23 +0000 (19:58 +0000)]
ar71xx: wndr4300: indicate WNDR3700v4 in the kernel support files

Apart from the wireless chip, the WNDR3700 v4 and the WNDR4300
is the same device. Indicate this in the kernel files.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40479

5 years agoar71xx: wndr4300: enable 5V power for the USB port
Gabor Juhos [Sat, 12 Apr 2014 19:58:20 +0000 (19:58 +0000)]
ar71xx: wndr4300: enable 5V power for the USB port

The 5V power of the USB is controlled by a GPIO pin of
the external WiFi chip. Setup the GPIO bitmasks in the
platform data of the WiFi chip to ensure that the 5V
power gets enabled by the ath9k driver.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40478

5 years agoar71xx: wndr4300: use KEY_RFKILL code for the Wireless button
Gabor Juhos [Sat, 12 Apr 2014 17:53:34 +0000 (17:53 +0000)]
ar71xx: wndr4300: use KEY_RFKILL code for the Wireless button

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40477

5 years agoar71xx: add default LED config for WiFi LEDs on the WNDR4300
Gabor Juhos [Sat, 12 Apr 2014 17:42:36 +0000 (17:42 +0000)]
ar71xx: add default LED config for WiFi LEDs on the WNDR4300

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40476

5 years agoar71xx: wndr4300: add LED for 2.4Ghz wifi interface
Gabor Juhos [Sat, 12 Apr 2014 17:42:35 +0000 (17:42 +0000)]
ar71xx: wndr4300: add LED for 2.4Ghz wifi interface

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40475

5 years agoar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs
Gabor Juhos [Sat, 12 Apr 2014 17:42:34 +0000 (17:42 +0000)]
ar71xx: wndr4300: select GPIO_OUT functionality for LED GPIOs

The bootloader does not initializes the output function
correctly for all LEDs. DO that from the board setup code.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40474

5 years agoar71xx: wndr4300: change 'orange' to 'amber' in LED color names
Gabor Juhos [Sat, 12 Apr 2014 17:42:33 +0000 (17:42 +0000)]
ar71xx: wndr4300: change 'orange' to 'amber' in LED color names

The hardware manual says amber so change the color part of
the LED names to reflect that. Also update the constant names.

Based on the the WNDR3700v4 support patch from Ralph Perlich:
  http://patchwork.openwrt.org/patch/4763/

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40473

5 years agoar71xx: fix typos in TP-Link rssileds definition
Gabor Juhos [Sat, 12 Apr 2014 16:01:45 +0000 (16:01 +0000)]
ar71xx: fix typos in TP-Link rssileds definition

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5109/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40472

5 years agoar71xx: add rssileds for Ubiquiti XM boards
Gabor Juhos [Sat, 12 Apr 2014 16:01:43 +0000 (16:01 +0000)]
ar71xx: add rssileds for Ubiquiti XM boards

Adds support for the received signal strength indicator LEDs of the
Bullet M, Nanostation M and Rocket M devices.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/5108/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40471

5 years agokernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed
Felix Fietkau [Sat, 12 Apr 2014 15:43:17 +0000 (15:43 +0000)]
kernel: mark kmod-usb-phy-nop as hidden to avoid building it where it is not needed

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40470

5 years agohostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)
Felix Fietkau [Sat, 12 Apr 2014 14:28:34 +0000 (14:28 +0000)]
hostapd: fix "bad number" error due to missing wps_pbc_in_m1 option (since r39995)

r39995 introduced a new parameter wps_pbc_in_m1 to wifi wps config, but
apparently did not provide a default value 0.

When that option's non-existing value is later evaluated in
/lib/netifd/hostapd.sh, it causes the "bad number" error to be logged in
syslog if user has not set the wps_pbc_in_m1 option. The error materialises
only if user has enabled wps.
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio1 (1254): sh: bad number
    Sat Apr 12 13:25:01 2014 daemon.notice netifd: radio0 (1253): sh: bad number

Discussion in bug 15508: https://dev.openwrt.org/ticket/15508#comment:3

Error is caused by line 282:
https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/netifd.sh#L282

My patch sets the parameter's default value to 0, which does nothing. The
default might also be set a bit later in the function, but this felt like the
most clear place to do that.

Signed-off-by hnyman <hannu.nyman@iki.fi>

SVN-Revision: 40469

5 years agox86/net5501: remove broken flag
Gabor Juhos [Sat, 12 Apr 2014 12:05:18 +0000 (12:05 +0000)]
x86/net5501: remove broken flag

According to Christophe, the kernel boots on the Soekris net5501
board.

Reported-by: Christophe Prevotaux <cprevotaux@nltinc.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40468

5 years agokernel: update 3.10 to 3.10.36
Gabor Juhos [Sat, 12 Apr 2014 11:59:07 +0000 (11:59 +0000)]
kernel: update 3.10 to 3.10.36

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40467

5 years agoar71xx: fix image generation
Gabor Juhos [Sat, 12 Apr 2014 11:59:05 +0000 (11:59 +0000)]
ar71xx: fix image generation

Move the comments out from the shell script to fix build
breakage introduced in r40464.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40466

5 years agoar71xx: avoid spurious restarts caused by the watchdog on AR934x
Gabor Juhos [Sat, 12 Apr 2014 10:21:04 +0000 (10:21 +0000)]
ar71xx: avoid spurious restarts caused by the watchdog on AR934x

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40465

5 years agoar71xx: add comments for image Makefile.
Gabor Juhos [Sat, 12 Apr 2014 09:52:58 +0000 (09:52 +0000)]
ar71xx: add comments for image Makefile.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5075/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40464

5 years agoar71xx: initial support for TP-Link Archer C7v2
Gabor Juhos [Sat, 12 Apr 2014 09:52:54 +0000 (09:52 +0000)]
ar71xx: initial support for TP-Link Archer C7v2

The C7v2 has 16 MB flash and QCA9880-BR4A rev 2 supported by ath10k driver.
The C7v1 had 8 MB flash and the unsupported QCA9880-AR1A rev 1.

Signed-off-by: Adam Serbinski <adam@serbinski.com>
Patchwork: http://patchwork.openwrt.org/patch/5071/
[juhosg:
 - remove the v2 specific profile add the ath10k driver to the existing
   Archer C7 profile instead. Although on v1 devices it does not change
   the non-working behaviour, but the ath10k driver is useful for users
   whom have replaced the wifi card with a supported one in their units.
 - update image/Makefile to build firmware image for both boards if the
   Archer C7 profile is selected]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 40463

5 years agobrcm2708: add missing configuration symbols
Florian Fainelli [Fri, 11 Apr 2014 22:38:54 +0000 (22:38 +0000)]
brcm2708: add missing configuration symbols

Spotted by buildbot and while doing a CONFIG_ALL=y build.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 40462

5 years agolantiq: add an extra partition to the TDW8970 flash that can be used to store the...
John Crispin [Fri, 11 Apr 2014 20:40:34 +0000 (20:40 +0000)]
lantiq: add an extra partition to the TDW8970 flash that can be used to store the vdsl firmware

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40461

5 years agolantiq: more vdsl related cleanups
John Crispin [Fri, 11 Apr 2014 20:40:24 +0000 (20:40 +0000)]
lantiq: more vdsl related cleanups

* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40460

5 years agonetifd: switch to using git.openwrt.org
Felix Fietkau [Fri, 11 Apr 2014 20:28:55 +0000 (20:28 +0000)]
netifd: switch to using git.openwrt.org

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40459

5 years agouci: fix import with not yet existing packages, preserve config permissions on commit...
Jo-Philipp Wich [Fri, 11 Apr 2014 16:14:09 +0000 (16:14 +0000)]
uci: fix import with not yet existing packages, preserve config permissions on commit, fix Lua detection in cmake

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40458

5 years agouhttpd: do not attempt to configure Lua handler if referenced file does not exist
Jo-Philipp Wich [Fri, 11 Apr 2014 16:13:27 +0000 (16:13 +0000)]
uhttpd: do not attempt to configure Lua handler if referenced file does not exist

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 40457

5 years agonetifd: update to latest version, adds a force_link parameter to bring up an interfac...
Felix Fietkau [Fri, 11 Apr 2014 13:48:41 +0000 (13:48 +0000)]
netifd: update to latest version, adds a force_link parameter to bring up an interface without active device carrier

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40456

5 years agox86_64: add usb support (including storage) to the kernel config
Felix Fietkau [Fri, 11 Apr 2014 13:22:28 +0000 (13:22 +0000)]
x86_64: add usb support (including storage) to the kernel config

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40455

5 years agox86: set default kernel version to 3.10
Felix Fietkau [Fri, 11 Apr 2014 13:22:24 +0000 (13:22 +0000)]
x86: set default kernel version to 3.10

Place the previous selection (3.3.8) into the only subtarget that did
not override it to 3.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40454

5 years agox86: remove linux 3.8 support
Felix Fietkau [Fri, 11 Apr 2014 13:22:19 +0000 (13:22 +0000)]
x86: remove linux 3.8 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40453

5 years ago[x86_64]: generate esxi compatible vmdks, too
Imre Kaloz [Fri, 11 Apr 2014 10:19:26 +0000 (10:19 +0000)]
[x86_64]: generate esxi compatible vmdks, too

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40452

5 years ago[x86_64]: reuqire qemu-img to be installed (the one we have in tools is too old)
Imre Kaloz [Fri, 11 Apr 2014 10:14:57 +0000 (10:14 +0000)]
[x86_64]: reuqire qemu-img to be installed (the one we have in tools is too old)

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40451

5 years agonetifd: update to the latest version, fixes some reload issues with proto=static
Felix Fietkau [Thu, 10 Apr 2014 15:21:13 +0000 (15:21 +0000)]
netifd: update to the latest version, fixes some reload issues with proto=static

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40449

5 years agokernel: add a dependency of kmod-r8169 on r8169-firmware
Felix Fietkau [Thu, 10 Apr 2014 14:43:33 +0000 (14:43 +0000)]
kernel: add a dependency of kmod-r8169 on r8169-firmware

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40448

5 years agolinux-firmware: add a new package for firmware (currently only builds r8169 firmware)
Felix Fietkau [Thu, 10 Apr 2014 14:43:30 +0000 (14:43 +0000)]
linux-firmware: add a new package for firmware (currently only builds r8169 firmware)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40447

5 years agobuild: add support for packing version control downloads with xz
Felix Fietkau [Thu, 10 Apr 2014 14:43:26 +0000 (14:43 +0000)]
build: add support for packing version control downloads with xz

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40446

5 years agogeneric: remove obsolete symbol export from block2mtd init patch
Felix Fietkau [Thu, 10 Apr 2014 14:43:22 +0000 (14:43 +0000)]
generic: remove obsolete symbol export from block2mtd init patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40445

5 years agox86: try harder to attach block2mtd to fix boot issues on devices with longer delays
Felix Fietkau [Thu, 10 Apr 2014 14:43:17 +0000 (14:43 +0000)]
x86: try harder to attach block2mtd to fix boot issues on devices with longer delays

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40444

5 years agonetifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)
Felix Fietkau [Thu, 10 Apr 2014 11:31:21 +0000 (11:31 +0000)]
netifd: fix a regression related to ppp + multiple updates (ipv4 + ipv6)

Fixes #15504

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40443

5 years ago[x86_64]: specify the adapter type for the vmdk conversion
Imre Kaloz [Thu, 10 Apr 2014 11:09:27 +0000 (11:09 +0000)]
[x86_64]: specify the adapter type for the vmdk conversion

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40442

5 years agomac80211: add back missing tx power handling fix (#12750)
Felix Fietkau [Thu, 10 Apr 2014 08:52:33 +0000 (08:52 +0000)]
mac80211: add back missing tx power handling fix (#12750)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40440

5 years agolantiq: move the dsl-modem config to network.@dsl-modem[-1]
John Crispin [Thu, 10 Apr 2014 08:14:33 +0000 (08:14 +0000)]
lantiq: move the dsl-modem config to network.@dsl-modem[-1]

make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40439

5 years agolantiq: vdsl init.d script should auto start
John Crispin [Wed, 9 Apr 2014 16:36:28 +0000 (16:36 +0000)]
lantiq: vdsl init.d script should auto start

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40438

5 years agolantiq: cleanup vdsl driver bringup
John Crispin [Wed, 9 Apr 2014 16:31:24 +0000 (16:31 +0000)]
lantiq: cleanup vdsl driver bringup

config interface 'wan'
# a, b, j
option annex b
# a, b, av, bv
option tone b
# vdsl.bin
option firmware
# atm, ptm
option xfer_mode atm

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40437

5 years agolantiq: make dsl_notify.sh executable
John Crispin [Wed, 9 Apr 2014 16:31:14 +0000 (16:31 +0000)]
lantiq: make dsl_notify.sh executable

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40436

5 years agoodhcpd: use correct defaults for interfaces not in UCI
Steven Barth [Wed, 9 Apr 2014 12:29:43 +0000 (12:29 +0000)]
odhcpd: use correct defaults for interfaces not in UCI

SVN-Revision: 40435

5 years ago[x86_64]: enable native KVM and VMware drivers
Imre Kaloz [Wed, 9 Apr 2014 11:54:44 +0000 (11:54 +0000)]
[x86_64]: enable native KVM and VMware drivers

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40434

5 years ago[x86_64]: upgrade to 3.14
Imre Kaloz [Wed, 9 Apr 2014 11:46:18 +0000 (11:46 +0000)]
[x86_64]: upgrade to 3.14

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 40433

5 years agoodhcp6c: fix recovering from status where all addresses have been lost
Steven Barth [Wed, 9 Apr 2014 06:57:04 +0000 (06:57 +0000)]
odhcp6c: fix recovering from status where all addresses have been lost

SVN-Revision: 40432

5 years agomac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)
Felix Fietkau [Tue, 8 Apr 2014 22:11:27 +0000 (22:11 +0000)]
mac80211: fix warnings triggered by tx power changes when using WDS AP (#15491)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40430

5 years agomac80211: fix user antenna gain calculation
Felix Fietkau [Tue, 8 Apr 2014 22:11:23 +0000 (22:11 +0000)]
mac80211: fix user antenna gain calculation

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40429

5 years agoath9k: fix AP mode crash issues
Felix Fietkau [Tue, 8 Apr 2014 22:11:19 +0000 (22:11 +0000)]
ath9k: fix AP mode crash issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40428

5 years agoath9k: fix some ANI related stability issues
Felix Fietkau [Tue, 8 Apr 2014 22:11:13 +0000 (22:11 +0000)]
ath9k: fix some ANI related stability issues

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40427

5 years agobase-files: add back missing function for find_mtd_part to /lib/functions.sh (fixes...
Felix Fietkau [Tue, 8 Apr 2014 21:17:49 +0000 (21:17 +0000)]
base-files: add back missing function for find_mtd_part to /lib/functions.sh (fixes #15496)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40426

5 years agobrcm47xx: refresh patches
Hauke Mehrtens [Tue, 8 Apr 2014 19:51:36 +0000 (19:51 +0000)]
brcm47xx: refresh patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 40425

5 years agokernel: bgmac: rework patch checking packet length
Hauke Mehrtens [Tue, 8 Apr 2014 19:50:17 +0000 (19:50 +0000)]
kernel: bgmac: rework patch checking packet length

This bgmac patch was an attempt to fix/workaround bug reported in
https://dev.openwrt.org/ticket/7198 noticed on WNR3500L.
Patch assumed length reported by the hardware was 0 and was trying to
read it until getting a different value. This was actually the opposite.
Lenghts were some invalid & huge values that resulted in skb_over_panic.
For example:
skbuff: skb_over_panic: text:83b21074 len:57222 (...)
skbuff: skb_over_panic: text:87af1024 len:43226 (...)
skbuff: skb_over_panic: text:87af5024 len:8739 (...)

So instead of that not-working patch checking for 0, write a new one
checking for huge values. In case something like that happens, dump
hardware state and drop the packet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 40424

5 years agods-lite: compatibility with ISPs that only offer public PDs
Steven Barth [Tue, 8 Apr 2014 06:19:37 +0000 (06:19 +0000)]
ds-lite: compatibility with ISPs that only offer public PDs

SVN-Revision: 40422

5 years agoOpenSSL: update to 1.0.1g
Steven Barth [Tue, 8 Apr 2014 05:24:36 +0000 (05:24 +0000)]
OpenSSL: update to 1.0.1g

This fixes the Heartbleed bug (CVE-2014-0160).

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 40421

5 years agobase-files: the ubi tol should be installed when jumping to ram_fs
John Crispin [Mon, 7 Apr 2014 15:35:20 +0000 (15:35 +0000)]
base-files: the ubi tol should be installed when jumping to ram_fs

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40420

5 years agoralink: fix WHR-300HP2 mtd size
John Crispin [Mon, 7 Apr 2014 15:10:26 +0000 (15:10 +0000)]
ralink: fix WHR-300HP2 mtd size

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40419

5 years agolantiq: there is a V2 of VG3503J that needs a newer fe phy firmware
John Crispin [Mon, 7 Apr 2014 15:10:22 +0000 (15:10 +0000)]
lantiq: there is a V2 of VG3503J that needs a newer fe phy firmware

this should really be auto detected by the kernel, lets used this workaround until the real
solution is ready

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40418

5 years agokernel: add a ubi forced detach ioctl
John Crispin [Mon, 7 Apr 2014 15:10:18 +0000 (15:10 +0000)]
kernel: add a ubi forced detach ioctl

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40417

5 years agobase-files: make use of new fstools
John Crispin [Mon, 7 Apr 2014 15:10:15 +0000 (15:10 +0000)]
base-files: make use of new fstools

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40416

5 years agofstools: update to latest git HEAD
John Crispin [Mon, 7 Apr 2014 15:10:07 +0000 (15:10 +0000)]
fstools: update to latest git HEAD

this adds the /sbin/ubi tool that can be used for sysupgrading ubi volumes

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40415

5 years agonetifd: update to the latest version, fixes a l3_dev handling regression leading...
Felix Fietkau [Mon, 7 Apr 2014 11:12:06 +0000 (11:12 +0000)]
netifd: update to the latest version, fixes a l3_dev handling regression leading to a crash

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40414

5 years agoar71xx: move some always-used led related functionality from kmod packages to the...
Felix Fietkau [Mon, 7 Apr 2014 10:44:52 +0000 (10:44 +0000)]
ar71xx: move some always-used led related functionality from kmod packages to the kernel image

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40413

5 years ago/lib/functions.sh: remove config_rename()
Felix Fietkau [Mon, 7 Apr 2014 10:29:51 +0000 (10:29 +0000)]
/lib/functions.sh: remove config_rename()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40412

5 years ago/lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functio...
Felix Fietkau [Mon, 7 Apr 2014 10:29:47 +0000 (10:29 +0000)]
/lib/functions.sh: move rarely used mtd and macaddr related functions to /lib/functions/system.sh

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40411

5 years ago/lib/functions.sh: remove jffs2_mark_erase()
Felix Fietkau [Mon, 7 Apr 2014 10:29:42 +0000 (10:29 +0000)]
/lib/functions.sh: remove jffs2_mark_erase()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40410

5 years agobase-files: remove config_clear() and list_remove()
Felix Fietkau [Mon, 7 Apr 2014 10:01:59 +0000 (10:01 +0000)]
base-files: remove config_clear() and list_remove()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40409

5 years agobase-files: move uci_apply_defaults() to /etc/init.d/boot
Felix Fietkau [Mon, 7 Apr 2014 10:01:54 +0000 (10:01 +0000)]
base-files: move uci_apply_defaults() to /etc/init.d/boot

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40408

5 years ago/lib/functions.sh: remove hotplug_dev()
Felix Fietkau [Mon, 7 Apr 2014 09:50:26 +0000 (09:50 +0000)]
/lib/functions.sh: remove hotplug_dev()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40406

5 years ago/lib/functions.sh: remove strtok()
Felix Fietkau [Mon, 7 Apr 2014 09:50:23 +0000 (09:50 +0000)]
/lib/functions.sh: remove strtok()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40405

5 years ago/lib/functions.sh: move preinit related functions to /lib/functions/preinit.sh
Felix Fietkau [Mon, 7 Apr 2014 09:50:19 +0000 (09:50 +0000)]
/lib/functions.sh: move preinit related functions to /lib/functions/preinit.sh

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40404

5 years ago/lib/functions.sh: remove pi_include()
Felix Fietkau [Mon, 7 Apr 2014 09:50:15 +0000 (09:50 +0000)]
/lib/functions.sh: remove pi_include()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40403

5 years ago/lib/functions.sh: remove jffs2_ready()
Felix Fietkau [Mon, 7 Apr 2014 09:50:11 +0000 (09:50 +0000)]
/lib/functions.sh: remove jffs2_ready()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40402

5 years ago/lib/functions.sh: remove support for non-overlayfs overlay fopivot types
Felix Fietkau [Mon, 7 Apr 2014 09:50:07 +0000 (09:50 +0000)]
/lib/functions.sh: remove support for non-overlayfs overlay fopivot types

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40401

5 years agoar71xx: add support for the TP-LINK TL-WR841N/ND v9
Felix Fietkau [Mon, 7 Apr 2014 08:00:02 +0000 (08:00 +0000)]
ar71xx: add support for the TP-LINK TL-WR841N/ND v9

Everything seems to be working fine. Potential issues:

* VLAN port IDs are reversed with regard to the numbers on the case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 40400

5 years agoar71xx: add support for QCA953x SoC
Felix Fietkau [Mon, 7 Apr 2014 07:59:45 +0000 (07:59 +0000)]
ar71xx: add support for QCA953x SoC

I don't have access to the specs, so I'm not sure about every detail, but I
haven't seen any problems with my test system, a TL-WR841N v9. It looks pretty
much like a QCA955x without PCI, a little twist in the clock calculation and
a AR9331-compatible switch.

Features not yet supported:

* EHCI (my test system doesn't have USB)
* ? (I have no idea if the QCA953x has any other features I don't know about
that aren't used by the TL-WR841N v9)

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 40399

5 years agobrcm63xx: hack around jffs2 corruption with SMP
Jonas Gorski [Sun, 6 Apr 2014 22:03:42 +0000 (22:03 +0000)]
brcm63xx: hack around jffs2 corruption with SMP

mempy_fromio seems to be randomly failing when the destination is
unaligned; work around it by forcing the name to be aligned in memory.

Should fix jffs2 and SMP for now, but needs to be some additional
looking into as it does not fix the source.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40396

5 years agoodhcpd: improve managed PD
Steven Barth [Sun, 6 Apr 2014 14:34:45 +0000 (14:34 +0000)]
odhcpd: improve managed PD

SVN-Revision: 40395

5 years agohostapd: update to version 2014-04-04
Felix Fietkau [Sun, 6 Apr 2014 12:13:55 +0000 (12:13 +0000)]
hostapd: update to version 2014-04-04

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40394

5 years agomac80211: update to wireless-testing 2014-03-31
Felix Fietkau [Sun, 6 Apr 2014 10:41:23 +0000 (10:41 +0000)]
mac80211: update to wireless-testing 2014-03-31

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40393

5 years agolantiq: remove unmaintained code
John Crispin [Sun, 6 Apr 2014 09:21:44 +0000 (09:21 +0000)]
lantiq: remove unmaintained code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40392

5 years agoramips: fix regression from r39949 (#15382)
Felix Fietkau [Sun, 6 Apr 2014 00:09:50 +0000 (00:09 +0000)]
ramips: fix regression from r39949 (#15382)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40391

5 years agouclibc++: disable mips16 support to avoid linkage errors with libsupc++ object files
Felix Fietkau [Sat, 5 Apr 2014 21:58:16 +0000 (21:58 +0000)]
uclibc++: disable mips16 support to avoid linkage errors with libsupc++ object files

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40390

5 years agobrcm63xx: sync mips counters during bringup of cpus
Jonas Gorski [Sat, 5 Apr 2014 18:32:34 +0000 (18:32 +0000)]
brcm63xx: sync mips counters during bringup of cpus

Fixes gettimeofday returning different values depending on which cpu
it is called.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40387

5 years agoodhcp6c: Add renew handler for proto dhcpv6
Felix Fietkau [Sat, 5 Apr 2014 18:17:25 +0000 (18:17 +0000)]
odhcp6c: Add renew handler for proto dhcpv6

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 40386

5 years agonetifd: Add renew handler for proto dhcp
Felix Fietkau [Sat, 5 Apr 2014 18:17:22 +0000 (18:17 +0000)]
netifd: Add renew handler for proto dhcp

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 40385

5 years agonetifd: update to latest version, fixes issues when l3 interface changes on reload...
Felix Fietkau [Sat, 5 Apr 2014 18:17:18 +0000 (18:17 +0000)]
netifd: update to latest version, fixes issues when l3 interface changes on reload (e.g. ppp -> dhcp/static)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 40384

5 years agofstools: scripts should propagate the cmdline
John Crispin [Sat, 5 Apr 2014 16:34:40 +0000 (16:34 +0000)]
fstools: scripts should propagate the cmdline

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 40383

5 years agoubi-utils: fix git tree path, a regex went mad
John Crispin [Sat, 5 Apr 2014 16:34:30 +0000 (16:34 +0000)]
ubi-utils: fix git tree path, a regex went mad

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40382

5 years agolantiq: cleanup the dsl control scripts
John Crispin [Sat, 5 Apr 2014 16:34:20 +0000 (16:34 +0000)]
lantiq: cleanup the dsl control scripts

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 40381

5 years agobrcm63xx: update development kernel to linux 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:17:08 +0000 (10:17 +0000)]
brcm63xx: update development kernel to linux 3.14

Now that 3.13 will be EOL soon, switch to 3.14.

Known issues:
 * 74x164 is not available because upstream dropped non-DT support
 * jffs2 breaks with SMP

Unknown issues:
 * probably plenty

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40380

5 years agokernel: fix bluetooth and zsmalloc for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:54 +0000 (10:16 +0000)]
kernel: fix bluetooth and zsmalloc for 3.14

zsmalloc was promoted from staging, while bluetooth gained a dependency
to a library shared with 802.15.4 for 6lowpan support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40379

5 years agokernel: fix usb module paths for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:52 +0000 (10:16 +0000)]
kernel: fix usb module paths for 3.14

dwc2 was promoted from staging, while u_rndis was merged into
usb_f_rndis.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40378

5 years agokernel: fix kmod-sound-core for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:50 +0000 (10:16 +0000)]
kernel: fix kmod-sound-core for 3.14

pcm-page-alloc was merged into snd-pcm.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40377

5 years agokernel: make sched_act_connmark compile for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:49 +0000 (10:16 +0000)]
kernel: make sched_act_connmark compile for 3.14

The upstream API changed, which allowed to simplify the code a bit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40376

5 years agokernel: make sched_esfq compile for 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:47 +0000 (10:16 +0000)]
kernel: make sched_esfq compile for 3.14

net_random was replaced with prandom_u32.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40375

5 years agokernel: add missing config symbol for linux 3.14
Jonas Gorski [Fri, 4 Apr 2014 10:16:44 +0000 (10:16 +0000)]
kernel: add missing config symbol for linux 3.14

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 40374