openwrt/svn-archive/archive.git
5 years agofirmware-utils: remove the wndr3700 utility
Gabor Juhos [Wed, 6 Nov 2013 10:16:40 +0000 (10:16 +0000)]
firmware-utils: remove the wndr3700 utility

It is not used anymore.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38663

5 years agoar71x: image: don't use the wndr3700 utility
Gabor Juhos [Wed, 6 Nov 2013 10:16:39 +0000 (10:16 +0000)]
ar71x: image: don't use the wndr3700 utility

Pass the uImage magic value directly to mkimage instead.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38662

5 years agosunxi: drop CONFIG_DEVTMPFS option
Luka Perkov [Wed, 6 Nov 2013 08:19:31 +0000 (08:19 +0000)]
sunxi: drop CONFIG_DEVTMPFS option

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38661

5 years agokernel: add some config options
Luka Perkov [Wed, 6 Nov 2013 08:19:24 +0000 (08:19 +0000)]
kernel: add some config options

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38660

5 years agoar71xx: image: fix WNDR4300 initramfs image generation
Gabor Juhos [Tue, 5 Nov 2013 18:41:20 +0000 (18:41 +0000)]
ar71xx: image: fix WNDR4300 initramfs image generation

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38659

5 years agoar71xx: image: allow to use optional parameters for MkuImageLzma/initramfs
Gabor Juhos [Tue, 5 Nov 2013 18:41:18 +0000 (18:41 +0000)]
ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfs

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38658

5 years ago[generic/3.12]: update for 3.12 final
Imre Kaloz [Tue, 5 Nov 2013 17:46:18 +0000 (17:46 +0000)]
[generic/3.12]: update for 3.12 final

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38657

5 years agobrcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L
Hauke Mehrtens [Tue, 5 Nov 2013 17:09:19 +0000 (17:09 +0000)]
brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L

This closes #14367 and #14328.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38656

5 years agoar71xx: generate recovery image for WNDR4300
Gabor Juhos [Tue, 5 Nov 2013 16:31:14 +0000 (16:31 +0000)]
ar71xx: generate recovery image for WNDR4300

Extended the Makefile to generate a working factory reset image
for Netgear WNDR4300. The image uses UBI with two volumes squashfs
(rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot
happy, a fake rootfs image is placed into the last erase block
of the kernel partition.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - restore the NetgearNAND/initramfs macro,
  - remove unused {Squash,Ubi}fsTemplate macros,
  - remove board specific mtd options from CONFIG_CMDLINE, append the
    board specific ubi.mtd parameter to the kernel command line instead,
  - increase kernel partition size to 2MiB,
  - use board specific ini file for ubinize,
  - put jffs2 eof mark into the rootfs_data ubi volume,
  - use KDIR_TMP for temporary images,
  - use the squashfs-raw image,
  - increase kernel partition size to 2MiB,
  - use a local ubinize macro,
  - fix macro parameter comments,
  - put the fake rootfs into the last erase block of the kernel
    partition,
  - move Image/Build/NetgearNAND/buildkernel macro before
    define Image/Build/NetgearNAND,
  - don't use the wndr3700 utility, use '-M' parameter of mkimage to set
    the uImage magic,
  - use '-recovery' suffix for the generated image, it is only usable via
    the fw_recovery function of the bootloader,
  - update commit log]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38655

5 years agopackage/ubox: fix jffs2 handling on MTD devices emulated by gluebi
Gabor Juhos [Tue, 5 Nov 2013 16:31:12 +0000 (16:31 +0000)]
package/ubox: fix jffs2 handling on MTD devices emulated by gluebi

The jffs2_ready() function in mount_root.c checks
the presence of various JFFS2 markers at the start
of a given MTD device. The function works on NOR
flashes because JFFS2 puts 'cleanmarker' nodes at
the start of freshly erased blocks.

However if jffs2 is used on a MTD device emulated
by the gluebi layer, the 'cleanmarker' nodes are
not present and the jffs2_ready() function fails.

Update the code to handle jffs2 correctly even on
MTD devices emulated by the gluebi layer.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38654

5 years agokernel: update 3.10 to 3.10.18
Gabor Juhos [Tue, 5 Nov 2013 08:25:45 +0000 (08:25 +0000)]
kernel: update 3.10 to 3.10.18

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38652

5 years agosunxi: add new target
Luka Perkov [Tue, 5 Nov 2013 08:00:34 +0000 (08:00 +0000)]
sunxi: add new target

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38651

5 years agoimx6: drop unused variable from Makefile
Luka Perkov [Tue, 5 Nov 2013 08:00:30 +0000 (08:00 +0000)]
imx6: drop unused variable from Makefile

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38650

5 years agoinclude: add more CPU flags for arm
Luka Perkov [Tue, 5 Nov 2013 08:00:24 +0000 (08:00 +0000)]
include: add more CPU flags for arm

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38649

5 years agodnsmasq: fix backward compatibility with existing configs
Jo-Philipp Wich [Mon, 4 Nov 2013 22:40:56 +0000 (22:40 +0000)]
dnsmasq: fix backward compatibility with existing configs

Changeset r36943 ("dnsmasq: use host-record instead of address") removed
the automatic domain expansion for config domain sections, this breaks
existing setups and alters the old behaviour in unexpected ways, therfore
restore behaviour of the current stable release.

Additionally handle fully qualified hostnames properly when setting up the
own hostrecord by stripping the local domain part form the given name
instead of unconditionally appending it, so that "example.lan" results
in "example example.lan" and not "example.lan example.lan.lan".

SVN-Revision: 38648

5 years agoar71xx: move WNDR4300 profile to the nand subtarget
Gabor Juhos [Mon, 4 Nov 2013 18:37:09 +0000 (18:37 +0000)]
ar71xx: move WNDR4300 profile to the nand subtarget

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38647

5 years agoar71xx: Add new subtarget nand for WNDR4300
Gabor Juhos [Mon, 4 Nov 2013 18:37:08 +0000 (18:37 +0000)]
ar71xx: Add new subtarget nand for WNDR4300

Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs.
This target will be used for NAND based router which make use of
UBI (and maybe UBIFS later on) in order to provide proper NAND
support.

Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
  - tweak target.mk:
     change BOARDNAME variable,
     improve Target/Description,
     remove targz and ubifs from FEATURES and add broken flag,
  - optimize kernel configuration:
     disable ubifs, it is not used yet,
     disable unused MTD options,
     disable SPI support
     disable unused network drivers,
     tune kernel command line,
  - remove image/ubinize.cfg, it will be in a follow-up patch
  - move profile modifications into a separate patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38646

5 years agoar71xx: remove yaffs from the generic rootfstype list
Gabor Juhos [Mon, 4 Nov 2013 18:37:07 +0000 (18:37 +0000)]
ar71xx: remove yaffs from the generic rootfstype list

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38645

5 years agoar71xx: image: dd root.* images in fs specific macros
Gabor Juhos [Mon, 4 Nov 2013 18:37:06 +0000 (18:37 +0000)]
ar71xx: image: dd root.* images in fs specific macros

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38644

5 years agokernel/3.1[02]: move MTD root device setup code to mtdcore
Gabor Juhos [Mon, 4 Nov 2013 18:37:05 +0000 (18:37 +0000)]
kernel/3.1[02]: move MTD root device setup code to mtdcore

The current code only allows to automatically set
root device on MTD partitions. Move the code to MTD
core to allow to use it with all MTD devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38643

5 years agokernel: refresh kernel configs with kconfig.pl
Gabor Juhos [Mon, 4 Nov 2013 18:37:03 +0000 (18:37 +0000)]
kernel: refresh kernel configs with kconfig.pl

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38642

5 years agokernel: add some config options
Hauke Mehrtens [Sun, 3 Nov 2013 20:20:14 +0000 (20:20 +0000)]
kernel: add some config options

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38640

5 years agokernel: fix dependencies of kmod-thermal
Hauke Mehrtens [Sun, 3 Nov 2013 20:18:45 +0000 (20:18 +0000)]
kernel: fix dependencies of kmod-thermal

This depends on kmod-hwmon-core

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38639

5 years agokernel: fix dependencies of usb-eth-gadget
Hauke Mehrtens [Sun, 3 Nov 2013 20:17:52 +0000 (20:17 +0000)]
kernel: fix dependencies of usb-eth-gadget

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38638

5 years agokernel: bgmac: update backport patch
Hauke Mehrtens [Sun, 3 Nov 2013 19:24:39 +0000 (19:24 +0000)]
kernel: bgmac: update backport patch

This adds some more bgmac patches from mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38637

5 years agoar71xx: image: only define profiles for the generic subtarget
Gabor Juhos [Fri, 1 Nov 2013 18:33:24 +0000 (18:33 +0000)]
ar71xx: image: only define profiles for the generic subtarget

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38636

5 years agoar71xx: image: add IMAGE_PROFILE variable
Gabor Juhos [Fri, 1 Nov 2013 18:33:22 +0000 (18:33 +0000)]
ar71xx: image: add IMAGE_PROFILE variable

Ensures that the 'Default' images are generated
even if the subtarget has no profiles.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38635

5 years agoar71xx: always enable hw ecc support for the ar934x-nfc module
Gabor Juhos [Fri, 1 Nov 2013 18:33:18 +0000 (18:33 +0000)]
ar71xx: always enable hw ecc support for the ar934x-nfc module

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38634

5 years agokernel: add missing config options
Hauke Mehrtens [Fri, 1 Nov 2013 08:49:35 +0000 (08:49 +0000)]
kernel: add missing config options

The buildbots found some new missing config options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38633

5 years agoopenvpn: clean up and fix the init script
Felix Fietkau [Thu, 31 Oct 2013 17:36:24 +0000 (17:36 +0000)]
openvpn: clean up and fix the init script

- clean up duplication of procd instance handling code
- using --cd *after* --config is rather pointless
- to be able to log errors properly, --syslog needs to be passed before --config
- tell procd about the generated or referenced config file instead of
  the uci file. this avoids having to restart all instances if only one
  of them changes.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38632

5 years agokirkwood: add userland support for Pogoplug E02
Luka Perkov [Thu, 31 Oct 2013 12:04:04 +0000 (12:04 +0000)]
kirkwood: add userland support for Pogoplug E02

This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38631

5 years agokirkwood: add Pogoplug E02 Kernel support
Luka Perkov [Thu, 31 Oct 2013 12:04:02 +0000 (12:04 +0000)]
kirkwood: add Pogoplug E02 Kernel support

This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38630

5 years agokirkwood: extend image/Makefile
Luka Perkov [Thu, 31 Oct 2013 11:44:28 +0000 (11:44 +0000)]
kirkwood: extend image/Makefile

* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos

Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38629

5 years agoimx6: minor image cleanup
Luka Perkov [Thu, 31 Oct 2013 11:44:27 +0000 (11:44 +0000)]
imx6: minor image cleanup

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38628

5 years agonetifd: update to the latest version, fixes regression in proto-shell scripts (#14400...
Felix Fietkau [Thu, 31 Oct 2013 11:22:01 +0000 (11:22 +0000)]
netifd: update to the latest version, fixes regression in proto-shell scripts (#14400, #14402)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38627

5 years ago[u-boot/omap]: use a single package to build MLO/u-boot for all omap boards
Imre Kaloz [Thu, 31 Oct 2013 10:57:46 +0000 (10:57 +0000)]
[u-boot/omap]: use a single package to build MLO/u-boot for all omap boards

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38626

5 years ago[package] uboot-imx6: update to 2013.10
Luka Perkov [Thu, 31 Oct 2013 00:00:51 +0000 (00:00 +0000)]
[package] uboot-imx6: update to 2013.10

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38625

5 years agoimx6: update patches
Luka Perkov [Wed, 30 Oct 2013 23:31:26 +0000 (23:31 +0000)]
imx6: update patches

Changes include PCI fixes and various upstream pending patches.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38624

5 years agocyassl: drop obsolete patches
Jo-Philipp Wich [Wed, 30 Oct 2013 15:16:59 +0000 (15:16 +0000)]
cyassl: drop obsolete patches

SVN-Revision: 38610

5 years agocyassl: upgrade to v2.8.0
Jo-Philipp Wich [Wed, 30 Oct 2013 13:19:48 +0000 (13:19 +0000)]
cyassl: upgrade to v2.8.0

Un-reverts the previous update commit and forward-ports the patch
to improve legacy SSLv2 handshake handling.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38609

5 years agoustream-ssl: update to the latest version, adds support for the current cyassl versio...
Felix Fietkau [Wed, 30 Oct 2013 12:56:47 +0000 (12:56 +0000)]
ustream-ssl: update to the latest version, adds support for the current cyassl version (#14386)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38608

5 years agolibubox: update to latest version, makes jshn roughly twice as fast
Felix Fietkau [Wed, 30 Oct 2013 11:25:05 +0000 (11:25 +0000)]
libubox: update to latest version, makes jshn roughly twice as fast

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38607

5 years agonetifd: update to latest version, adds fixes and some preparation for supporting...
Felix Fietkau [Wed, 30 Oct 2013 11:25:01 +0000 (11:25 +0000)]
netifd: update to latest version, adds fixes and some preparation for supporting wifi devices

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38606

5 years agokernel: add missing dependency for kernel 3.12 in tg3
Hauke Mehrtens [Wed, 30 Oct 2013 09:50:13 +0000 (09:50 +0000)]
kernel: add missing dependency for kernel 3.12 in tg3

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38605

5 years agokernel: add some missing config options
Hauke Mehrtens [Wed, 30 Oct 2013 09:48:19 +0000 (09:48 +0000)]
kernel: add some missing config options

This was spotted by the buildbots.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38604

5 years agoramips: enable building of TEW-692GR images
Gabor Juhos [Wed, 30 Oct 2013 07:06:24 +0000 (07:06 +0000)]
ramips: enable building of TEW-692GR images

The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.

Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38603

5 years agoramips: fix number of GPIOs for RT3352
Gabor Juhos [Wed, 30 Oct 2013 07:06:23 +0000 (07:06 +0000)]
ramips: fix number of GPIOs for RT3352

The RT3352 SoC only supports 46 GPIO lines.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38602

5 years agoramips: remove trailing whitespaces from .dts{,i} files
Gabor Juhos [Wed, 30 Oct 2013 07:06:22 +0000 (07:06 +0000)]
ramips: remove trailing whitespaces from .dts{,i} files

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38601

5 years agoar71xx: move subtarget specific features to target.mk
Gabor Juhos [Wed, 30 Oct 2013 06:54:59 +0000 (06:54 +0000)]
ar71xx: move subtarget specific features to target.mk

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38600

5 years agouboot-ar71xx: make it depend on the generic ar71xx subtarget
Gabor Juhos [Wed, 30 Oct 2013 06:54:56 +0000 (06:54 +0000)]
uboot-ar71xx: make it depend on the generic ar71xx subtarget

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38599

5 years agoar71xx: don't build uImages for the mikrotik subtarget
Gabor Juhos [Wed, 30 Oct 2013 06:54:55 +0000 (06:54 +0000)]
ar71xx: don't build uImages for the mikrotik subtarget

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38598

5 years agoar71xx: disable non Mikrotik boards in the mikrotik subtarget
Gabor Juhos [Wed, 30 Oct 2013 06:54:54 +0000 (06:54 +0000)]
ar71xx: disable non Mikrotik boards in the mikrotik subtarget

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38597

5 years agoar71xx: fix Kconfig symbol selection for RB95x/RB2011
Gabor Juhos [Wed, 30 Oct 2013 06:54:53 +0000 (06:54 +0000)]
ar71xx: fix Kconfig symbol selection for RB95x/RB2011

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38596

5 years agoar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config
Gabor Juhos [Wed, 30 Oct 2013 06:51:02 +0000 (06:51 +0000)]
ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38595

5 years agogeneric: mtdsplit_uimage: add uImage magic for the WRN2200 board
Gabor Juhos [Wed, 30 Oct 2013 06:51:01 +0000 (06:51 +0000)]
generic: mtdsplit_uimage: add uImage magic for the WRN2200 board

Should fix boot failure on the WNR2200 boards.
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38594

5 years agoar71xx: add profile and build image for the BXU2000n-2 A1 board
Gabor Juhos [Wed, 30 Oct 2013 06:50:59 +0000 (06:50 +0000)]
ar71xx: add profile and build image for the BXU2000n-2 A1 board

Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - remove MultiProfile, it makes no sense for a single board
  - move SingleProfile call and the mtdlayout to a different
    location keep things sorted (well, almost)]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38593

5 years agoar71xx: add user-space support for the BXU2000n-2 A1 board
Gabor Juhos [Wed, 30 Oct 2013 06:50:58 +0000 (06:50 +0000)]
ar71xx: add user-space support for the BXU2000n-2 A1 board

Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38592

5 years agoar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board
Gabor Juhos [Wed, 30 Oct 2013 06:50:57 +0000 (06:50 +0000)]
ar71xx: add kernel support for BHU Networks BXU2000n-2 A1 board

BXU2000n-2 A1 is a BHU Networks WLAN board, use ar9341 chip.

Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
  - rename and refresh kernel patch,
  - fix some checkpatch warnings and adjust whitespaces in
    mach-bhu-bxu2000n2-a.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38591

5 years agoar71xx: add user space support for the Sitecom WLR-8100 wireless router
Gabor Juhos [Wed, 30 Oct 2013 06:50:55 +0000 (06:50 +0000)]
ar71xx: add user space support for the Sitecom WLR-8100 wireless router

Patchwork: http://patchwork.openwrt.org/patch/4148/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38590

5 years agoar71xx: add kernel support for the Sitecom WLR-8100 wireless router
Gabor Juhos [Wed, 30 Oct 2013 06:50:54 +0000 (06:50 +0000)]
ar71xx: add kernel support for the Sitecom WLR-8100 wireless router

  - unsure about copyright message
  - based on AP136-010

Patchwork: http://patchwork.openwrt.org/patch/4147/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[juhosg: rename and refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38589

5 years agoar71xx: add profile and build image for the Dragino2 board
Gabor Juhos [Wed, 30 Oct 2013 06:50:53 +0000 (06:50 +0000)]
ar71xx: add profile and build image for the Dragino2 board

Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg: remove kernel+rootfs partition and use uimage split instead]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38588

5 years agoar71xx: add kernel support for DRAGINO2
Gabor Juhos [Wed, 30 Oct 2013 06:50:52 +0000 (06:50 +0000)]
ar71xx: add kernel support for DRAGINO2

This patch adds support for DRAGINO2 board (used by
Meshpotato v2). Most of the files included can be
found in the official svn repository provided by the
company [1]. I have just adapt it to the last OpenWrt
trunk revision (Fri Oct 4 10:49:47 2013).

 1. http://svn.dragino.com/dragino2

Patchwork: http://patchwork.openwrt.org/patch/4234/
Signed-off-by: Pau Escrich <p4u@dabax.net>
[juhosg:
 - rename and refresh kernel patch,
 - fix checkpatch warnings in  mach-dragino2.c]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38587

5 years agoimx6: update gateworks profile with extra packages
Luka Perkov [Wed, 30 Oct 2013 00:50:14 +0000 (00:50 +0000)]
imx6: update gateworks profile with extra packages

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38579

5 years agolibubox: update to latest version, adds minor improvements to jshn, blobmsg and uloop
Felix Fietkau [Tue, 29 Oct 2013 14:12:06 +0000 (14:12 +0000)]
libubox: update to latest version, adds minor improvements to jshn, blobmsg and uloop

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38578

5 years agoodhcp6c: Multiple improvements and fixes
Steven Barth [Tue, 29 Oct 2013 13:23:28 +0000 (13:23 +0000)]
odhcp6c: Multiple improvements and fixes

* Various RFC compliance fixes (thanks to Hans Dedecker)
* Fix RA spam filter logic causing ipv6 connection issues
* Fix parameters -F and -P being order dependent

SVN-Revision: 38577

5 years agoRevert "[cyassl]: upgrade to 2.8.0"
Jo-Philipp Wich [Tue, 29 Oct 2013 09:53:48 +0000 (09:53 +0000)]
Revert "[cyassl]: upgrade to 2.8.0"

Reverts the CyaSSL version bump for now since the update completely broke
trunk building due to incompatible changes in the IO callback API which in
turn breaks the core ustream-ssl package.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38576

5 years agokernel: add w1-master-mxc module
Luka Perkov [Tue, 29 Oct 2013 02:52:17 +0000 (02:52 +0000)]
kernel: add w1-master-mxc module

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38575

5 years agoimx6: add initial 3.12 support
Luka Perkov [Tue, 29 Oct 2013 02:19:09 +0000 (02:19 +0000)]
imx6: add initial 3.12 support

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38574

5 years agoimx6: use upstream gateworks board names
Luka Perkov [Tue, 29 Oct 2013 02:19:07 +0000 (02:19 +0000)]
imx6: use upstream gateworks board names

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38573

5 years agokernel: refresh 3.12 patches on -rc7 release
Luka Perkov [Tue, 29 Oct 2013 02:19:05 +0000 (02:19 +0000)]
kernel: refresh 3.12 patches on -rc7 release

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38572

5 years agoimx6: update 3.10 patches
Luka Perkov [Tue, 29 Oct 2013 02:19:03 +0000 (02:19 +0000)]
imx6: update 3.10 patches

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38571

5 years agokernel: add missing config optinons
Hauke Mehrtens [Mon, 28 Oct 2013 19:19:28 +0000 (19:19 +0000)]
kernel: add missing config optinons

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38570

5 years agokernel: jffs2: ignore bad blocks after the end-of-filesystem marker
Felix Fietkau [Mon, 28 Oct 2013 16:06:47 +0000 (16:06 +0000)]
kernel: jffs2: ignore bad blocks after the end-of-filesystem marker

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38568

5 years agouClibc: get rid of bogus unused strlcpy definition to fix build errors
Felix Fietkau [Mon, 28 Oct 2013 15:15:35 +0000 (15:15 +0000)]
uClibc: get rid of bogus unused strlcpy definition to fix build errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38567

5 years agotoolchain/gdb: remove use of extern inline to fix build errors
Felix Fietkau [Mon, 28 Oct 2013 15:15:31 +0000 (15:15 +0000)]
toolchain/gdb: remove use of extern inline to fix build errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38566

5 years agomtd-utils: get rid of extern inline to fix build errors
Felix Fietkau [Mon, 28 Oct 2013 15:15:28 +0000 (15:15 +0000)]
mtd-utils: get rid of extern inline to fix build errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38565

5 years agoe2fsprogs: update to 1.42.8, fixes a build error
Felix Fietkau [Mon, 28 Oct 2013 15:15:24 +0000 (15:15 +0000)]
e2fsprogs: update to 1.42.8, fixes a build error

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38564

5 years agosquashfs: make inline functions static to fix build errors
Felix Fietkau [Mon, 28 Oct 2013 15:15:20 +0000 (15:15 +0000)]
squashfs: make inline functions static to fix build errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38563

5 years agosquashfs4: make inline functions static to fix build errors
Felix Fietkau [Mon, 28 Oct 2013 15:15:16 +0000 (15:15 +0000)]
squashfs4: make inline functions static to fix build errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38562

5 years agopkg-config: update to latest version, fix build on Mac OS X 10.9
Felix Fietkau [Mon, 28 Oct 2013 15:15:12 +0000 (15:15 +0000)]
pkg-config: update to latest version, fix build on Mac OS X 10.9

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38561

5 years agobuild: fix build on Mac OS X 10.9
Felix Fietkau [Mon, 28 Oct 2013 15:15:09 +0000 (15:15 +0000)]
build: fix build on Mac OS X 10.9

Add a wrapper around the clang gcc emulation to fix -print-file-name=<lib>

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38560

5 years agou-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Felix Fietkau [Mon, 28 Oct 2013 15:15:05 +0000 (15:15 +0000)]
u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38559

5 years ago[cyassl]: upgrade to 2.8.0
Imre Kaloz [Mon, 28 Oct 2013 14:34:59 +0000 (14:34 +0000)]
[cyassl]: upgrade to 2.8.0

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38558

5 years agogpio-button-hotplug: add support for power buttons
John Crispin [Mon, 28 Oct 2013 13:45:57 +0000 (13:45 +0000)]
gpio-button-hotplug: add support for power buttons

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38557

5 years agoubox: update to latest git HEAD
John Crispin [Mon, 28 Oct 2013 06:48:04 +0000 (06:48 +0000)]
ubox: update to latest git HEAD

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38554

5 years agoralink: add package for mt7620 sdhci
John Crispin [Mon, 28 Oct 2013 06:47:56 +0000 (06:47 +0000)]
ralink: add package for mt7620 sdhci

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38553

5 years agoralink: dont include mt7620 sdhci support inside the kernel
John Crispin [Mon, 28 Oct 2013 06:47:48 +0000 (06:47 +0000)]
ralink: dont include mt7620 sdhci support inside the kernel

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38552

5 years agoralink: add support for missing mt7620 mux values
John Crispin [Mon, 28 Oct 2013 06:47:39 +0000 (06:47 +0000)]
ralink: add support for missing mt7620 mux values

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38551

5 years agoralink: add support for 2 new mt7620 boards made by buffalo
John Crispin [Mon, 28 Oct 2013 06:47:31 +0000 (06:47 +0000)]
ralink: add support for 2 new mt7620 boards made by buffalo

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38550

5 years agokernel: add packages for sdhci support
John Crispin [Mon, 28 Oct 2013 06:47:20 +0000 (06:47 +0000)]
kernel: add packages for sdhci support

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38549

5 years agokernel: fix compile error in 3.12
Luka Perkov [Sun, 27 Oct 2013 20:47:04 +0000 (20:47 +0000)]
kernel: fix compile error in 3.12

Upstream commit c655bc6896b94ee0223393f26155c6daf1e2d148 changed number of
arguments in nf_ct_iterate_cleanup() function.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38547

5 years agokernel: add missing 3.12 config symbols
Luka Perkov [Sun, 27 Oct 2013 20:46:55 +0000 (20:46 +0000)]
kernel: add missing 3.12 config symbols

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38546

5 years agomvebu: drop patch that has been upstreamed
Luka Perkov [Sun, 27 Oct 2013 16:08:23 +0000 (16:08 +0000)]
mvebu: drop patch that has been upstreamed

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38545

5 years agomvebu: delete empty directory
Luka Perkov [Sun, 27 Oct 2013 16:05:28 +0000 (16:05 +0000)]
mvebu: delete empty directory

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38544

5 years agoubox: update to latest git head
John Crispin [Sat, 26 Oct 2013 12:25:11 +0000 (12:25 +0000)]
ubox: update to latest git head

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38541

5 years agoralink: pinctrl fix for non muxed pins
John Crispin [Sat, 26 Oct 2013 12:24:55 +0000 (12:24 +0000)]
ralink: pinctrl fix for non muxed pins

Pins with no mux option failed to be recognized as gpios.

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38540

5 years agobrcm47xx: b44: fix error handling for dummy phy creation
Hauke Mehrtens [Fri, 25 Oct 2013 21:12:48 +0000 (21:12 +0000)]
brcm47xx: b44: fix error handling for dummy phy creation

When the mdio bus is unregistered the newly created phy will also be
unregistered and freed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38539

5 years agobrcm47xx: b44: add dummy phy device if we do not find any
Hauke Mehrtens [Fri, 25 Oct 2013 21:02:13 +0000 (21:02 +0000)]
brcm47xx: b44: add dummy phy device if we do not find any

On some devices with e.g. a BCM2535F switch the second MAC is used, but
we can not find a phy under all addresses between 0 and 31, 0xffffffff
is returned as phy id. If we can not find a phy at the expected address
create a dummy one.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38538

5 years agokernel: add keyboard-imx module
Luka Perkov [Fri, 25 Oct 2013 10:29:49 +0000 (10:29 +0000)]
kernel: add keyboard-imx module

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38537

5 years agomalta: add kernel configuration for 3.12
Florian Fainelli [Fri, 25 Oct 2013 01:48:29 +0000 (01:48 +0000)]
malta: add kernel configuration for 3.12

Boot tested using QEMU

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 38536