From 1d55d7811de58e9ed0946e694aad4984ed1d52da Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Tue, 23 Jun 2009 19:58:50 +0000 Subject: [PATCH] [adm5120] nuke obsolete kernel include dir SVN-Revision: 16546 --- .../asm-mips/mach-adm5120/adm5120_defs.h | 53 ---- .../asm-mips/mach-adm5120/adm5120_info.h | 127 -------- .../asm-mips/mach-adm5120/adm5120_intc.h | 63 ---- .../asm-mips/mach-adm5120/adm5120_mpmc.h | 92 ------ .../asm-mips/mach-adm5120/adm5120_nand.h | 89 ------ .../asm-mips/mach-adm5120/adm5120_platform.h | 87 ----- .../asm-mips/mach-adm5120/adm5120_switch.h | 300 ------------------ .../asm-mips/mach-adm5120/adm5120_uart.h | 64 ---- .../include/asm-mips/mach-adm5120/asm/sizes.h | 56 ---- .../mach-adm5120/cpu-feature-overrides.h | 71 ----- .../include/asm-mips/mach-adm5120/gpio.h | 115 ------- .../files/include/asm-mips/mach-adm5120/irq.h | 43 --- .../asm-mips/mach-adm5120/prom/admboot.h | 17 - .../include/asm-mips/mach-adm5120/prom/cfe.h | 18 -- .../asm-mips/mach-adm5120/prom/generic.h | 18 -- .../asm-mips/mach-adm5120/prom/myloader.h | 179 ----------- .../asm-mips/mach-adm5120/prom/routerboot.h | 125 -------- .../asm-mips/mach-adm5120/prom/zynos.h | 86 ----- .../files/include/asm-mips/mach-adm5120/war.h | 25 -- 19 files changed, 1628 deletions(-) delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/irq.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h delete mode 100644 target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h deleted file mode 100644 index bf220ff4d6..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - * ADM5120 SoC definitions - * - * This file defines some constants specific to the ADM5120 SoC - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef _ASM_MIPS_MACH_ADM5120_DEFS_H -#define _ASM_MIPS_MACH_ADM5120_DEFS_H - -#define ADM5120_SDRAM0_BASE 0x00000000 -#define ADM5120_SDRAM1_BASE 0x01000000 -#define ADM5120_SRAM1_BASE 0x10000000 -#define ADM5120_EXTIO0_BASE 0x10C00000 -#define ADM5120_EXTIO0_SIZE 0x00200000 -#define ADM5120_EXTIO1_BASE 0x10E00000 -#define ADM5120_EXTIO1_SIZE 0x00200000 -#define ADM5120_MPMC_BASE 0x11000000 -#define ADM5120_MPMC_SIZE 0x00200000 -#define ADM5120_USBC_BASE 0x11200000 -#define ADM5120_USBC_SIZE 0x00200000 -#define ADM5120_PCIMEM_BASE 0x11400000 -#define ADM5120_PCIMEM_SIZE 0x00100000 -#define ADM5120_PCIIO_BASE 0x11500000 -#define ADM5120_PCIIO_SIZE 0x000FFFF0 -#define ADM5120_PCICFG_ADDR 0x115FFFF0 -#define ADM5120_PCICFG_DATA 0x115FFFF8 -#define ADM5120_PCICFG_SIZE 0x00000010 -#define ADM5120_SWITCH_BASE 0x12000000 -#define ADM5120_SWITCH_SIZE 0x00200000 -#define ADM5120_INTC_BASE 0x12200000 -#define ADM5120_INTC_SIZE 0x00200000 -#define ADM5120_UART0_BASE 0x12600000 -#define ADM5120_UART1_BASE 0x12800000 -#define ADM5120_UART_SIZE 0x00200000 -#define ADM5120_SRAM0_BASE 0x1FC00000 - -#define ADM5120_NAND_BASE ADM5120_SRAM1_BASE -#define ADM5120_NAND_SIZE 0xB - -#define ADM5120_CLK_175 175000000 -#define ADM5120_CLK_200 200000000 -#define ADM5120_CLK_225 225000000 -#define ADM5120_CLK_250 250000000 - -#define ADM5120_UART_CLOCK 62500000 - -#endif /* _ASM_MIPS_MACH_ADM5120_DEFS_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h deleted file mode 100644 index d90d9d10d8..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h +++ /dev/null @@ -1,127 +0,0 @@ -/* - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MACH_ADM5120_INFO_H -#define _MACH_ADM5120_INFO_H - -#include - -extern unsigned int adm5120_prom_type; -#define ADM5120_PROM_GENERIC 0 -#define ADM5120_PROM_CFE 1 -#define ADM5120_PROM_MYLOADER 2 -#define ADM5120_PROM_ROUTERBOOT 3 -#define ADM5120_PROM_BOOTBASE 4 -#define ADM5120_PROM_UBOOT 5 -#define ADM5120_PROM_LAST 5 - -extern unsigned int adm5120_product_code; -extern unsigned int adm5120_revision; -extern unsigned int adm5120_nand_boot; - -extern unsigned long adm5120_speed; -#define ADM5120_SPEED_175 175000000 -#define ADM5120_SPEED_200 200000000 -#define ADM5120_SPEED_225 225000000 -#define ADM5120_SPEED_250 250000000 - -extern unsigned int adm5120_package; -#define ADM5120_PACKAGE_PQFP 0 -#define ADM5120_PACKAGE_BGA 1 - -extern unsigned long adm5120_memsize; - -extern unsigned long adm5120_mach_type; - -#define MACH_ADM5120_GENERIC 0 /* Generic board */ -#define MACH_ADM5120_WP54G_WRT 1 /* Compex WP54G-WRT */ -#define MACH_ADM5120_WP54 2 /* Compex WP54G/WP54AG/WPP54G/WPP54AG */ -#define MACH_ADM5120_NP28G 3 /* Compex NP28G */ -#define MACH_ADM5120_NP28GHS 4 /* Compex NP28G HotSpot */ -#define MACH_ADM5120_NP27G 5 /* Compex NP27G */ -#define MACH_ADM5120_WP54Gv1C 6 /* Compex WP54G version 1C */ -#define MACH_ADM5120_RB_11X 7 /* Mikrotik RouterBOARD 111/112 */ -#define MACH_ADM5120_RB_133 8 /* Mikrotik RouterBOARD 133 */ -#define MACH_ADM5120_RB_133C 9 /* Mikrotik RouterBOARD 133c */ -#define MACH_ADM5120_RB_150 10 /* Mikrotik RouterBOARD 150 */ -#define MACH_ADM5120_RB_153 11 /* Mikrotik RouterBOARD 153 */ -#define MACH_ADM5120_RB_192 12 /* Mikrotik RouterBOARD 192 */ -#define MACH_ADM5120_HS100 13 /* ZyXEL HomeSafe 100/100W */ -#define MACH_ADM5120_P334U 14 /* ZyXEL Prestige 334U */ -#define MACH_ADM5120_P334W 15 /* ZyXEL Prestige 334W */ -#define MACH_ADM5120_P334WH 16 /* ZyXEL Prestige 334WH */ -#define MACH_ADM5120_P334WHD 17 /* ZyXEL Prestige 334WHD */ -#define MACH_ADM5120_P334WT 18 /* ZyXEL Prestige 334WT */ -#define MACH_ADM5120_P335 19 /* ZyXEL Prestige 335/335WT */ -#define MACH_ADM5120_P335PLUS 20 /* ZyXEL Prestige 335Plus */ -#define MACH_ADM5120_P335U 21 /* ZyXEL Prestige 335U */ -#define MACH_ADM5120_ES2108 22 /* ZyXEL Ethernet Switch 2108 */ -#define MACH_ADM5120_ES2108F 23 /* ZyXEL Ethernet Switch 2108-F */ -#define MACH_ADM5120_ES2108G 24 /* ZyXEL Ethernet Switch 2108-G */ -#define MACH_ADM5120_ES2108LC 25 /* ZyXEL Ethernet Switch 2108-LC */ -#define MACH_ADM5120_ES2108PWR 26 /* ZyXEL Ethernet Switch 2108-PWR */ -#define MACH_ADM5120_ES2024A 27 /* ZyXEL Ethernet Switch 2024A */ -#define MACH_ADM5120_ES2024PWR 28 /* ZyXEL Ethernet Switch 2024PWR */ -#define MACH_ADM5120_CAS630 29 /* Cellvision CAS-630/630W */ -#define MACH_ADM5120_CAS670 30 /* Cellvision CAS-670/670W */ -#define MACH_ADM5120_CAS700 31 /* Cellvision CAS-700/700W */ -#define MACH_ADM5120_CAS771 32 /* Cellvision CAS-771/771W */ -#define MACH_ADM5120_CAS790 33 /* Cellvision CAS-790 */ -#define MACH_ADM5120_CAS861 34 /* Cellvision CAS-861/861W */ -#define MACH_ADM5120_NFS101U 35 /* Cellvision NFS-101U/101WU */ -#define MACH_ADM5120_NFS202U 36 /* Cellvision NFS-202U/202WU */ -#define MACH_ADM5120_EASY5120PATA 37 /* Infineon EASY 5120P-ATA */ -#define MACH_ADM5120_EASY5120RT 38 /* Infineon EASY 5120-RT */ -#define MACH_ADM5120_EASY5120WVOIP 39 /* Infineon EASY 5120-WVoIP */ -#define MACH_ADM5120_EASY83000 40 /* Infineon EASY-83000 */ -#define MACH_ADM5120_BR6104K 41 /* Edimax BR-6104K */ -#define MACH_ADM5120_BR6104KP 42 /* Edimax BR-6104KP */ -#define MACH_ADM5120_BR61X4WG 43 /* Edimax BR-6104Wg/BR-6114WG */ -#define MACH_ADM5120_PMUGW 44 /* Motorola Powerline MU Gateway */ - -/* - * TODO:remove adm5120_eth* variables when the switch driver will be - * converted into a real platform driver - */ -extern unsigned int adm5120_eth_num_ports; -extern unsigned char adm5120_eth_macs[6][6]; -extern unsigned char adm5120_eth_vlans[6]; - -extern void adm5120_soc_init(void) __init; -extern void adm5120_mem_init(void) __init; -extern void adm5120_ndelay(u32 ns); - -extern void (*adm5120_board_reset)(void); - -extern void adm5120_gpio_init(void) __init; -extern void adm5120_gpio_csx0_enable(void) __init; -extern void adm5120_gpio_csx1_enable(void) __init; -extern void adm5120_gpio_ew_enable(void) __init; - -static inline int adm5120_package_pqfp(void) -{ - return (adm5120_package == ADM5120_PACKAGE_PQFP); -} - -static inline int adm5120_package_bga(void) -{ - return (adm5120_package == ADM5120_PACKAGE_BGA); -} - -static inline int adm5120_has_pci(void) -{ - return (adm5120_package == ADM5120_PACKAGE_BGA); -} - -static inline int adm5120_has_gmii(void) -{ - return (adm5120_package == ADM5120_PACKAGE_BGA); -} - -#endif /* _MACH_ADM5120_INFO_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h deleted file mode 100644 index 52883cf2dc..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * ADM5120 interrupt controller definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in interrupt controller. - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MACH_ADM5120_INTC_H -#define _MACH_ADM5120_INTC_H - -/* - * INTC register offsets - */ -#define INTC_REG_IRQ_STATUS 0x00 /* Interrupt status after masking */ -#define INTC_REG_IRQ_RAW_STATUS 0x04 /* Interrupt status before masking */ -#define INTC_REG_IRQ_ENABLE 0x08 /* Used to enable the interrupt sources */ -#define INTC_REG_IRQ_ENABLE_CLEAR 0x0C /* Used to disable the interrupt sources */ -#define INTC_REG_IRQ_DISABLE INTC_REG_IRQ_ENABLE_CLEAR -#define INTC_REG_INT_MODE 0x14 /* The interrupt mode of the sources */ -#define INTC_REG_FIQ_STATUS 0x18 /* FIQ status */ -#define INTC_REG_IRQ_TEST_SOURCE 0x1C -#define INTC_REG_IRQ_SOURCE_SELECT 0x20 -#define INTC_REG_INT_LEVEL 0x24 - -/* - * INTC IRQ numbers - */ -#define INTC_IRQ_TIMER 0 /* built in timer */ -#define INTC_IRQ_UART0 1 /* built-in UART0 */ -#define INTC_IRQ_UART1 2 /* built-in UART1 */ -#define INTC_IRQ_USBC 3 /* USB Host Controller */ -#define INTC_IRQ_GPIO2 4 /* GPIO line 2 */ -#define INTC_IRQ_GPIO4 5 /* GPIO line 4 */ -#define INTC_IRQ_PCI0 6 /* PCI slot 2 */ -#define INTC_IRQ_PCI1 7 /* PCI slot 3 */ -#define INTC_IRQ_PCI2 8 /* PCI slot 4 */ -#define INTC_IRQ_SWITCH 9 /* built-in ethernet switch */ -#define INTC_IRQ_LAST INTC_IRQ_SWITCH -#define INTC_IRQ_COUNT 10 - -/* - * INTC register bits - */ -#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER ) -#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 ) -#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 ) -#define INTC_INT_USBC ( 1 << INTC_IRQ_USBC ) -#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 ) -#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 ) -#define INTC_INT_PCI0 ( 1 << INTC_IRQ_PCI0 ) -#define INTC_INT_PCI1 ( 1 << INTC_IRQ_PCI1 ) -#define INTC_INT_PCI2 ( 1 << INTC_IRQ_PCI2 ) -#define INTC_INT_SWITCH ( 1 << INTC_IRQ_SWITCH ) -#define INTC_INT_ALL (( 1 << INTC_IRQ_COUNT)-1) - -#endif /* _MACH_ADM5120_INTC_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h deleted file mode 100644 index 5383659dbf..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h +++ /dev/null @@ -1,92 +0,0 @@ -/* - * ADM5120 MPMC (Multiport Memory Controller) register definitions - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MACH_ADM5120_MPMC_H -#define _MACH_ADM5120_MPMC_H - -#define MPMC_READ_REG(r) __raw_readl( \ - (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) -#define MPMC_WRITE_REG(r, v) __raw_writel((v), \ - (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r) - -#define MPMC_REG_CTRL 0x0000 -#define MPMC_REG_STATUS 0x0004 -#define MPMC_REG_CONF 0x0008 -#define MPMC_REG_DC 0x0020 -#define MPMC_REG_DR 0x0024 -#define MPMC_REG_DRP 0x0030 - -#define MPMC_REG_DC0 0x0100 -#define MPMC_REG_DRC0 0x0104 -#define MPMC_REG_DC1 0x0120 -#define MPMC_REG_DRC1 0x0124 -#define MPMC_REG_DC2 0x0140 -#define MPMC_REG_DRC2 0x0144 -#define MPMC_REG_DC3 0x0160 -#define MPMC_REG_DRC3 0x0164 -#define MPMC_REG_SC0 0x0200 /* for F_CS1_N */ -#define MPMC_REG_SC1 0x0220 /* for F_CS0_N */ -#define MPMC_REG_SC2 0x0240 -#define MPMC_REG_WEN2 0x0244 -#define MPMC_REG_OEN2 0x0248 -#define MPMC_REG_RD2 0x024C -#define MPMC_REG_PG2 0x0250 -#define MPMC_REG_WR2 0x0254 -#define MPMC_REG_TN2 0x0258 -#define MPMC_REG_SC3 0x0260 - -/* Control register bits */ -#define MPMC_CTRL_AM ( 1 << 1 ) /* Address Mirror */ -#define MPMC_CTRL_LPM ( 1 << 2 ) /* Low Power Mode */ -#define MPMC_CTRL_DWB ( 1 << 3 ) /* Drain Write Buffers */ - -/* Status register bits */ -#define MPMC_STATUS_BUSY ( 1 << 0 ) /* Busy */ -#define MPMC_STATUS_WBS ( 1 << 1 ) /* Write Buffer Status */ -#define MPMC_STATUS_SRA ( 1 << 2 ) /* Self-Refresh Acknowledge*/ - -/* Dynamic Control register bits */ -#define MPMC_DC_CE ( 1 << 0 ) -#define MPMC_DC_DMC ( 1 << 1 ) -#define MPMC_DC_SRR ( 1 << 2 ) -#define MPMC_DC_SI_SHIFT 7 -#define MPMC_DC_SI_MASK ( 3 << 7 ) -#define MPMC_DC_SI_NORMAL ( 0 << 7 ) -#define MPMC_DC_SI_MODE ( 1 << 7 ) -#define MPMC_DC_SI_PALL ( 2 << 7 ) -#define MPMC_DC_SI_NOP ( 3 << 7 ) - -#define SRAM_REG_CONF 0x00 -#define SRAM_REG_WWE 0x04 -#define SRAM_REG_WOE 0x08 -#define SRAM_REG_WRD 0x0C -#define SRAM_REG_WPG 0x10 -#define SRAM_REG_WWR 0x14 -#define SRAM_REG_WTR 0x18 - -/* Dynamic Configuration register bits */ -#define DC_BE (1 << 19) /* buffer enable */ -#define DC_RW_SHIFT 28 /* shift for number of rows */ -#define DC_RW_MASK 0x03 -#define DC_NB_SHIFT 26 /* shift for number of banks */ -#define DC_NB_MASK 0x01 -#define DC_CW_SHIFT 22 /* shift for number of columns */ -#define DC_CW_MASK 0x07 -#define DC_DW_SHIFT 7 /* shift for device width */ -#define DC_DW_MASK 0x03 - -/* Static Configuration register bits */ -#define SC_MW_MASK 0x03 /* memory width mask */ -#define SC_MW_8 0x00 /* 8 bit memory width */ -#define SC_MW_16 0x01 /* 16 bit memory width */ -#define SC_MW_32 0x02 /* 32 bit memory width */ - -#endif /* _MACH_ADM5120_MPMC_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h deleted file mode 100644 index 636d27fecf..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * ADM5120 NAND interface definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in NAND interface. - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * NAND interface routines was based on a driver for Linux 2.6.19+ which - * was derived from the driver for Linux 2.4.xx published by Mikrotik for - * their RouterBoard 1xx and 5xx series boards. - * Copyright (C) 2007 David Goodenough - * Copyright (C) 2007 Florian Fainelli - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MACH_ADM5120_NAND_H -#define _MACH_ADM5120_NAND_H - -#include -#include - -#include -#include - -/* NAND control registers */ -#define NAND_REG_DATA 0x0 /* data register */ -#define NAND_REG_SET_CEn 0x1 /* CE# low */ -#define NAND_REG_CLR_CEn 0x2 /* CE# high */ -#define NAND_REG_CLR_CLE 0x3 /* CLE low */ -#define NAND_REG_SET_CLE 0x4 /* CLE high */ -#define NAND_REG_CLR_ALE 0x5 /* ALE low */ -#define NAND_REG_SET_ALE 0x6 /* ALE high */ -#define NAND_REG_SET_SPn 0x7 /* SP# low (use spare area) */ -#define NAND_REG_CLR_SPn 0x8 /* SP# high (do not use spare area) */ -#define NAND_REG_SET_WPn 0x9 /* WP# low */ -#define NAND_REG_CLR_WPn 0xA /* WP# high */ -#define NAND_REG_STATUS 0xB /* Status register */ - -#define ADM5120_NAND_STATUS_READY 0x80 - -#define NAND_READ_REG(r) \ - readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) -#define NAND_WRITE_REG(r, v) \ - writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r)) - -/*-------------------------------------------------------------------------*/ - -static inline void adm5120_nand_enable(void) -{ - SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE); - SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1); -} - -static inline void adm5120_nand_set_wpn(unsigned int set) -{ - NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1); -} - -static inline void adm5120_nand_set_spn(unsigned int set) -{ - NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1); -} - -static inline void adm5120_nand_set_cle(unsigned int set) -{ - NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1); -} - -static inline void adm5120_nand_set_ale(unsigned int set) -{ - NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1); -} - -static inline void adm5120_nand_set_cen(unsigned int set) -{ - NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1); -} - -static inline u8 adm5120_nand_get_status(void) -{ - return NAND_READ_REG(NAND_REG_STATUS); -} - -#endif /* _MACH_ADM5120_NAND_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h deleted file mode 100644 index 9d2e430cd8..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h +++ /dev/null @@ -1,87 +0,0 @@ -/* - * ADM5120 specific platform definitions - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ASM_MIPS_MACH_ADM5120_PLATFORM_H -#define _ASM_MIPS_MACH_ADM5120_PLATFORM_H - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct adm5120_flash_platform_data { - void (*set_vpp)(struct map_info *, int); - void (*switch_bank)(unsigned); - u32 window_size; -#ifdef CONFIG_MTD_PARTITIONS - unsigned int nr_parts; - struct mtd_partition *parts; -#endif -}; - -struct adm5120_switch_platform_data { - /* TODO: not yet implemented */ -}; - -struct adm5120_pci_irq { - u8 slot; - u8 func; - u8 pin; - unsigned irq; -}; - -#define PCIIRQ(s,f,p,i) {.slot = (s), .func = (f), .pin = (p), .irq = (i)} - -#ifdef CONFIG_PCI -extern void adm5120_pci_set_irq_map(unsigned int nr_irqs, - struct adm5120_pci_irq *map) __init; -#else -static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs, - struct adm5120_pci_irq *map) -{ -} -#endif - -extern void adm5120_setup_eth_macs(u8 *mac_base) __init; - -extern struct adm5120_flash_platform_data adm5120_flash0_data; -extern struct adm5120_flash_platform_data adm5120_flash1_data; - -extern void adm5120_add_device_flash(unsigned id) __init; -extern void adm5120_add_device_usb(void) __init; -extern void adm5120_add_device_uart(unsigned id) __init; -extern void adm5120_add_device_nand(struct platform_nand_data *pdata) __init; -extern void adm5120_add_device_switch(unsigned num_ports, u8 *vlan_map) __init; -extern void adm5120_add_device_gpio(u32 disable_mask) __init; -extern void adm5120_add_device_gpio_buttons(unsigned nbuttons, - struct gpio_button *buttons) __init; - -#define GPIO_LED_DEF(g, n, t, a) { \ - .name = (n), \ - .default_trigger = (t), \ - .gpio = (g), \ - .active_low = (a) \ -} - -#define GPIO_LED_STD(g, n, t) GPIO_LED_DEF((g), (n), (t), 0) -#define GPIO_LED_INV(g, n, t) GPIO_LED_DEF((g), (n), (t), 1) - -extern void adm5120_add_device_gpio_leds(unsigned num_leds, - struct gpio_led *leds) __init; - -#endif /* _ASM_MIPS_MACH_ADM5120_PLATFORM_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h deleted file mode 100644 index 91adc5bae9..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - * ADM5120 ethernet switch definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in Ethernet switch. - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MACH_ADM5120_SWITCH_H -#define _MACH_ADM5120_SWITCH_H - -#ifndef BIT -# define BIT(at) (1 << (at)) -#endif -#define BITMASK(len) (BIT(len)-1) - -#define SW_READ_REG(r) __raw_readl( \ - (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) -#define SW_WRITE_REG(r, v) __raw_writel((v), \ - (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r) - -/* Switch register offsets */ -#define SWITCH_REG_CODE 0x0000 -#define SWITCH_REG_SOFT_RESET 0x0004 /* Soft Reset */ -#define SWITCH_REG_BOOT_DONE 0x0008 /* Boot Done */ -#define SWITCH_REG_SW_RESET 0x000C /* Switch Reset */ -#define SWITCH_REG_PHY_STATUS 0x0014 /* PHY Status */ -#define SWITCH_REG_MEMCTRL 0x001C /* Memory Control */ -#define SWITCH_REG_CPUP_CONF 0x0024 /* CPU Port Configuration */ -#define SWITCH_REG_PORT_CONF0 0x0028 /* Port Configuration 0 */ -#define SWITCH_REG_PORT_CONF1 0x002C /* Port Configuration 1 */ -#define SWITCH_REG_PORT_CONF2 0x0030 /* Port Configuration 2 */ -#define SWITCH_REG_VLAN_G1 0x0040 /* VLAN group 1 */ -#define SWITCH_REG_VLAN_G2 0x0044 /* VLAN group 2 */ -#define SWITCH_REG_SEND_TRIG 0x0048 /* Send Trigger */ -#define SWITCH_REG_MAC_WT0 0x0058 /* MAC Write Address 0 */ -#define SWITCH_REG_MAC_WT1 0x005C /* MAC Write Address 1 */ -#define SWITCH_REG_BW_CNTL0 0x0060 /* Bandwidth Control 0 */ -#define SWITCH_REG_BW_CNTL1 0x0064 /* Bandwidth Control 1 */ -#define SWITCH_REG_PHY_CNTL0 0x0068 /* PHY Control 0 */ -#define SWITCH_REG_PHY_CNTL1 0x006C /* PHY Control 1 */ -#define SWITCH_REG_PORT_TH 0x0078 /* Port Threshold */ -#define SWITCH_REG_PHY_CNTL2 0x007C /* PHY Control 2 */ -#define SWITCH_REG_PHY_CNTL3 0x0080 /* PHY Control 3 */ -#define SWITCH_REG_PRI_CNTL 0x0084 /* Priority Control */ -#define SWITCH_REG_PHY_CNTL4 0x00A0 /* PHY Control 4 */ -#define SWITCH_REG_EMPTY_CNT 0x00A4 /* Empty Count */ -#define SWITCH_REG_PORT_CNTLS 0x00A8 /* Port Control Select */ -#define SWITCH_REG_PORT_CNTL 0x00AC /* Port Control */ -#define SWITCH_REG_INT_STATUS 0x00B0 /* Interrupt Status */ -#define SWITCH_REG_INT_MASK 0x00B4 /* Interrupt Mask */ -#define SWITCH_REG_GPIO_CONF0 0x00B8 /* GPIO Configuration 0 */ -#define SWITCH_REG_GPIO_CONF2 0x00BC /* GPIO Configuration 1 */ -#define SWITCH_REG_WDOG0 0x00C0 /* Watchdog 0 */ -#define SWITCH_REG_WDOG1 0x00C4 /* Watchdog 1 */ - -#define SWITCH_REG_SHDA 0x00D0 /* Send High Descriptors Address */ -#define SWITCH_REG_SLDA 0x00D4 /* Send Low Descriptors Address */ -#define SWITCH_REG_RHDA 0x00D8 /* Receive High Descriptor Address */ -#define SWITCH_REG_RLDA 0x00DC /* Receive Low Descriptor Address */ -#define SWITCH_REG_SHWA 0x00E0 /* Send High Working Address */ -#define SWITCH_REG_SLWA 0x00E4 /* Send Low Working Address */ -#define SWITCH_REG_RHWA 0x00E8 /* Receive High Working Address */ -#define SWITCH_REG_RLWA 0x00EC /* Receive Low Working Address */ - -#define SWITCH_REG_TIMER_INT 0x00F0 /* Timer */ -#define SWITCH_REG_TIMER 0x00F4 /* Timer Interrupt */ - -#define SWITCH_REG_PORT0_LED 0x0100 -#define SWITCH_REG_PORT1_LED 0x0104 -#define SWITCH_REG_PORT2_LED 0x0108 -#define SWITCH_REG_PORT3_LED 0x010C -#define SWITCH_REG_PORT4_LED 0x0110 - -/* CODE register bits */ -#define CODE_PC_MASK BITMASK(16) /* Product Code */ -#define CODE_REV_SHIFT 16 -#define CODE_REV_MASK BITMASK(4) /* Product Revision */ -#define CODE_CLKS_SHIFT 20 -#define CODE_CLKS_MASK BITMASK(2) /* Clock Speed */ -#define CODE_CLKS_175 0 /* 175 MHz */ -#define CODE_CLKS_200 1 /* 200 MHz */ -#define CODE_CLKS_225 2 /* 225 MHz */ -#define CODE_CLKS_250 3 /* 250 MHz */ -#define CODE_NAB BIT(24) /* NAND boot */ -#define CODE_PK_MASK BITMASK(1) /* Package type */ -#define CODE_PK_SHIFT 29 -#define CODE_PK_BGA 0 /* BGA package */ -#define CODE_PK_PQFP 1 /* PQFP package */ - -/* MEMCTRL register bits */ -#define MEMCTRL_SDRS_MASK BITMASK(3) /* SDRAM bank size */ -#define MEMCTRL_SDRS_4M 0x01 -#define MEMCTRL_SDRS_8M 0x02 -#define MEMCTRL_SDRS_16M 0x03 -#define MEMCTRL_SDRS_64M 0x04 -#define MEMCTRL_SDRS_128M 0x05 -#define MEMCTRL_SDR1_ENABLE BIT(5) /* enable SDRAM bank 1 */ - -#define MEMCTRL_SRS0_SHIFT 8 /* shift for SRAM0 size */ -#define MEMCTRL_SRS1_SHIFT 16 /* shift for SRAM1 size */ -#define MEMCTRL_SRS_MASK BITMASK(3) /* SRAM size mask */ -#define MEMCTRL_SRS_DISABLED 0x00 /* Disabled */ -#define MEMCTRL_SRS_512K 0x01 /* 512KB*/ -#define MEMCTRL_SRS_1M 0x02 /* 1MB */ -#define MEMCTRL_SRS_2M 0x03 /* 2MB */ -#define MEMCTRL_SRS_4M 0x04 /* 4MB */ - -/* Port bits used in various registers */ -#define SWITCH_PORT_PHY0 BIT(0) -#define SWITCH_PORT_PHY1 BIT(1) -#define SWITCH_PORT_PHY2 BIT(2) -#define SWITCH_PORT_PHY3 BIT(3) -#define SWITCH_PORT_PHY4 BIT(4) -#define SWITCH_PORT_MII BIT(5) -#define SWITCH_PORT_CPU BIT(6) - -/* Port bit shorthands */ -#define SWITCH_PORTS_PHY 0x1F /* phy ports */ -#define SWITCH_PORTS_NOCPU 0x3F /* physical ports */ -#define SWITCH_PORTS_ALL 0x7F /* all ports */ - -/* CPUP_CONF register bits */ -#define CPUP_CONF_DCPUP BIT(0) /* Disable CPU port */ -#define CPUP_CONF_CRCP BIT(1) /* CRC padding from CPU */ -#define CPUP_CONF_BTM BIT(2) /* Bridge Testing Mode */ -#define CPUP_CONF_DUNP_SHIFT 9 /* Disable Unknown Packets for portX */ -#define CPUP_CONF_DMCP_SHIFT 16 /* Disable Mcast Packets form portX */ -#define CPUP_CONF_DBCP_SHIFT 24 /* Disable Bcast Packets form portX */ - -/* PORT_CONF0 register bits */ -#define PORT_CONF0_DP_SHIFT 0 /* Disable Port */ -#define PORT_CONF0_EMCP_SHIFT 8 /* Enable All MC Packets */ -#define PORT_CONF0_BP_SHIFT 16 /* Enable Back Pressure */ - -/* PORT_CONF1 register bits */ -#define PORT_CONF1_DISL_SHIFT 0 /* Disable Learning */ -#define PORT_CONF1_BS_SHIFT 6 /* Blocking State */ -#define PORT_CONF1_BM_SHIFT 12 /* Blocking Mode */ - -/* SEND_TRIG register bits */ -#define SEND_TRIG_STL BIT(0) /* Send Trigger Low */ -#define SEND_TRIG_STH BIT(1) /* Send Trigger High */ - -/* MAC_WT0 register bits */ -#define MAC_WT0_MAWC BIT(0) /* MAC address write command */ -#define MAC_WT0_MWD_SHIFT 1 -#define MAC_WT0_MWD BIT(1) /* MAC write done */ -#define MAC_WT0_WFB BIT(2) /* Write Filter Bit */ -#define MAC_WT0_WVN_SHIFT 3 /* Write Vlan Number shift */ -#define MAC_WT0_WVE BIT(6) /* Write VLAN enable */ -#define MAC_WT0_WPMN_SHIFT 7 -#define MAC_WT0_WAF_SHIFT 13 /* Write Age Field shift */ -#define MAC_WT0_WAF_EMPTY 0 -#define MAC_WT0_WAF_STATIC 7 /* age: static */ -#define MAC_WT0_MAC0_SHIFT 16 -#define MAC_WT0_MAC1_SHIFT 24 - -/* MAC_WT1 register bits */ -#define MAC_WT1_MAC2_SHIFT 0 -#define MAC_WT1_MAC3_SHIFT 8 -#define MAC_WT1_MAC4_SHIFT 16 -#define MAC_WT1_MAC5_SHIFT 24 - -/* BW_CNTL0/BW_CNTL1 register bits */ -#define BW_CNTL_DISABLE 0x00 -#define BW_CNTL_64K 0x01 -#define BW_CNTL_128K 0x02 -#define BW_CNTL_256K 0x03 -#define BW_CNTL_512K 0x04 -#define BW_CNTL_1M 0x05 -#define BW_CNTL_4M 0x06 -#define BW_CNTL_10M 0x07 - -#define P4TBC_SHIFT 0 -#define P4RBC_SHIFT 4 -#define P5TBC_SHIFT 8 -#define P5RBC_SHIFT 12 - -#define BW_CNTL1_NAND_ENABLE 0x100 - -/* PHY_CNTL0 register bits */ -#define PHY_CNTL0_PHYA_MASK BITMASK(5) -#define PHY_CNTL0_PHYR_MASK BITMASK(5) -#define PHY_CNTL0_PHYR_SHIFT 8 -#define PHY_CNTL0_WC BIT(13) /* Write Command */ -#define PHY_CNTL0_RC BIT(14) /* Read Command */ -#define PHY_CNTL0_WTD_MASK BIT(16) /* Read Command */ -#define PHY_CNTL0_WTD_SHIFT 16 - -/* PHY_CNTL1 register bits */ -#define PHY_CNTL1_WOD BIT(0) /* Write Operation Done */ -#define PHY_CNTL1_ROD BIT(1) /* Read Operation Done */ -#define PHY_CNTL1_RD_MASK BITMASK(16) -#define PHY_CNTL1_RD_SHIFT 16 - -/* PHY_CNTL2 register bits */ -#define PHY_CNTL2_ANE_SHIFT 0 /* Auto Negotiation Enable */ -#define PHY_CNTL2_SC_SHIFT 5 /* Speed Control */ -#define PHY_CNTL2_DC_SHIFT 10 /* Duplex Control */ -#define PHY_CNTL2_FNCV_SHIFT 15 /* Recommended FC Value */ -#define PHY_CNTL2_PHYR_SHIFT 20 /* PHY reset */ -#define PHY_CNTL2_AMDIX_SHIFT 25 /* Auto MDIX enable */ -/* PHY_CNTL2_RMAE is bad in datasheet */ -#define PHY_CNTL2_RMAE BIT(31) /* Recommended MCC Average enable */ - -/* PHY_CNTL3 register bits */ -#define PHY_CNTL3_RNT BIT(10) /* Recommend Normal Threshold */ - -/* PORT_TH register bits */ -#define PORT_TH_PPT_MASK BITMASK(8) /* Per Port Threshold */ -#define PORT_TH_CPUT_SHIFT 8 /* CPU Port Buffer Threshold */ -#define PORT_TH_CPUT_MASK BITMASK(8) -#define PORT_TH_CPUHT_SHIFT 16 /* CPU Hold Threshold */ -#define PORT_TH_CPUHT_MASK BITMASK(8) -#define PORT_TH_CPURT_SHIFT 24 /* CPU Release Threshold */ -#define PORT_TH_CPURT_MASK BITMASK(8) - -/* EMPTY_CNT register bits */ -#define EMPTY_CNT_EBGB_MASK BITMASK(9) /* Empty Blocks in the Global Buffer */ - -/* GPIO_CONF0 register bits */ -#define GPIO_CONF0_MASK BITMASK(8) -#define GPIO_CONF0_IM_SHIFT 0 -#define GPIO_CONF0_IV_SHIFT 8 -#define GPIO_CONF0_OE_SHIFT 16 -#define GPIO_CONF0_OV_SHIFT 24 -#define GPIO_CONF0_IM_MASK (0xFF << GPIO_CONF0_IM_SHIFT) -#define GPIO_CONF0_IV_MASK (0xFF << GPIO_CONF0_IV_SHIFT) -#define GPIO_CONF0_OE_MASK (0xFF << GPIO_CONF0_OE_SHIFT) -#define GPIO_CONF0_OV_MASK (0xFF << GPIO_CONF0_OV_SHIFT) - -/* GPIO_CONF2 register bits */ -#define GPIO_CONF2_CSX0 BIT(4) /* enable CSX0:INTX0 on GPIO 1:2 */ -#define GPIO_CONF2_CSX1 BIT(5) /* enable CSX1:INTX1 on GPIO 3:4 */ -#define GPIO_CONF2_EW BIT(6) /* enable wait state pin for CSX0/1 */ - -/* INT_STATUS/INT_MASK register bits */ -#define SWITCH_INT_SHD BIT(0) /* Send High Done */ -#define SWITCH_INT_SLD BIT(1) /* Send Low Done */ -#define SWITCH_INT_RHD BIT(2) /* Receive High Done */ -#define SWITCH_INT_RLD BIT(3) /* Receive Low Done */ -#define SWITCH_INT_HDF BIT(4) /* High Descriptor Full */ -#define SWITCH_INT_LDF BIT(5) /* Low Descriptor Full */ -#define SWITCH_INT_P0QF BIT(6) /* Port0 Queue Full */ -#define SWITCH_INT_P1QF BIT(7) /* Port1 Queue Full */ -#define SWITCH_INT_P2QF BIT(8) /* Port2 Queue Full */ -#define SWITCH_INT_P3QF BIT(9) /* Port3 Queue Full */ -#define SWITCH_INT_P4QF BIT(10) /* Port4 Queue Full */ -#define SWITCH_INT_P5QF BIT(11) /* Port5 Queue Full */ -#define SWITCH_INT_CPQF BIT(13) /* CPU Queue Full */ -#define SWITCH_INT_GQF BIT(14) /* Global Queue Full */ -#define SWITCH_INT_MD BIT(15) /* Must Drop */ -#define SWITCH_INT_BCS BIT(16) /* BC Storm */ -#define SWITCH_INT_PSC BIT(18) /* Port Status Change */ -#define SWITCH_INT_ID BIT(19) /* Intruder Detected */ -#define SWITCH_INT_W0TE BIT(20) /* Watchdog 0 Timer Expired */ -#define SWITCH_INT_W1TE BIT(21) /* Watchdog 1 Timer Expired */ -#define SWITCH_INT_RDE BIT(22) /* Receive Descriptor Error */ -#define SWITCH_INT_SDE BIT(23) /* Send Descriptor Error */ -#define SWITCH_INT_CPUH BIT(24) /* CPU Hold */ - -/* TIMER_INT register bits */ -#define TIMER_INT_TOS BIT(0) /* time-out status */ -#define TIMER_INT_TOM BIT(16) /* mask time-out interrupt */ - -/* TIMER register bits */ -#define TIMER_PERIOD_MASK BITMASK(16) /* mask for timer period */ -#define TIMER_PERIOD_DEFAULT 0xFFFF /* default timer period */ -#define TIMER_TE BIT(16) /* timer enable bit */ - -/* PORTx_LED register bits */ -#define LED_MODE_MASK BITMASK(4) -#define LED_MODE_INPUT 0 -#define LED_MODE_FLASH 1 -#define LED_MODE_OUT_HIGH 2 -#define LED_MODE_OUT_LOW 3 -#define LED_MODE_LINK 4 -#define LED_MODE_SPEED 5 -#define LED_MODE_DUPLEX 6 -#define LED_MODE_ACT 7 -#define LED_MODE_COLL 8 -#define LED_MODE_LINK_ACT 9 -#define LED_MODE_DUPLEX_COLL 10 -#define LED_MODE_10M_ACT 11 -#define LED_MODE_100M_ACT 12 -#define LED0_MODE_SHIFT 0 /* LED0 mode shift */ -#define LED1_MODE_SHIFT 4 /* LED1 mode shift */ -#define LED2_MODE_SHIFT 8 /* LED2 mode shift */ -#define LED0_IV_SHIFT 12 /* LED0 input value shift */ -#define LED1_IV_SHIFT 13 /* LED1 input value shift */ -#define LED2_IV_SHIFT 14 /* LED2 input value shift */ - -#endif /* _MACH_ADM5120_SWITCH_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h deleted file mode 100644 index 6308f6bd18..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * ADM5120 UART definitions - * - * This header file defines the hardware registers of the ADM5120 SoC - * built-in UARTs. - * - * Copyright (C) 2007 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MACH_ADM5120_UART_H -#define _MACH_ADM5120_UART_H - -#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1) - -#define UART_REG_DATA 0x00 -#define UART_REG_RSR 0x04 -#define UART_REG_ECR UART_REG_RSR -#define UART_REG_LCRH 0x08 -#define UART_REG_LCRM 0x0C -#define UART_REG_LCRL 0x10 -#define UART_REG_CTRL 0x14 -#define UART_REG_FLAG 0x18 - -/* Receive Status Register bits */ -#define UART_RSR_FE ( 1 << 0 ) -#define UART_RSR_PE ( 1 << 1 ) -#define UART_RSR_BE ( 1 << 2 ) -#define UART_RSR_OE ( 1 << 3 ) -#define UART_RSR_ERR ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE ) - -#define UART_ECR_ALL 0xFF - -/* Line Control High register bits */ -#define UART_LCRH_BRK ( 1 << 0 ) /* send break */ -#define UART_LCRH_PEN ( 1 << 1 ) /* parity enable */ -#define UART_LCRH_EPS ( 1 << 2 ) /* even parity select */ -#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */ -#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */ -#define UART_LCRH_FEN ( 1 << 4 ) /* FIFO enable */ - -#define UART_LCRH_WLEN5 ( 0 << 5 ) -#define UART_LCRH_WLEN6 ( 1 << 5 ) -#define UART_LCRH_WLEN7 ( 2 << 5 ) -#define UART_LCRH_WLEN8 ( 3 << 5 ) - -/* Control register bits */ -#define UART_CTRL_EN ( 1 << 0 ) - -/* Flag register bits */ -#define UART_FLAG_CTS ( 1 << 0 ) -#define UART_FLAG_DSR ( 1 << 1 ) -#define UART_FLAG_DCD ( 1 << 2 ) -#define UART_FLAG_BUSY ( 1 << 3 ) -#define UART_FLAG_RXFE ( 1 << 4 ) -#define UART_FLAG_TXFF ( 1 << 5 ) -#define UART_FLAG_RXFF ( 1 << 6 ) -#define UART_FLAG_TXFE ( 1 << 7 ) - -#endif /* _MACH_ADM5120_UART_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h deleted file mode 100644 index 503843db15..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Size definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __sizes_h -#define __sizes_h 1 - -/* handy sizes */ -#define SZ_16 0x00000010 -#define SZ_256 0x00000100 -#define SZ_512 0x00000200 - -#define SZ_1K 0x00000400 -#define SZ_4K 0x00001000 -#define SZ_8K 0x00002000 -#define SZ_16K 0x00004000 -#define SZ_64K 0x00010000 -#define SZ_128K 0x00020000 -#define SZ_256K 0x00040000 -#define SZ_512K 0x00080000 - -#define SZ_1M 0x00100000 -#define SZ_2M 0x00200000 -#define SZ_4M 0x00400000 -#define SZ_8M 0x00800000 -#define SZ_16M 0x01000000 -#define SZ_32M 0x02000000 -#define SZ_64M 0x04000000 -#define SZ_128M 0x08000000 -#define SZ_256M 0x10000000 -#define SZ_512M 0x20000000 - -#define SZ_1G 0x40000000 -#define SZ_2G 0x80000000 - -#endif - -/* END */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h deleted file mode 100644 index c6310cc6e6..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h +++ /dev/null @@ -1,71 +0,0 @@ -/* - * ADM5120 specific CPU feature overrides - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H - -/* - * The ADM5120 SOC has a built-in MIPS 4Kc core. - */ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 1 -#define cpu_has_divec 1 -/* #define cpu_has_vce ? */ -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -#define cpu_has_prefetch 1 -/* #define cpu_has_mcheck ? */ -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 - -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -/* #define cpu_has_pindexed_dcache ? */ - -/* #define cpu_icache_snoops_remote_store ? */ - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -/* #define cpu_has_nofpuex ? */ -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -/* #define cpu_has_inclusive_pcaches ? */ - -#define cpu_dcache_line_size() 16 -#define cpu_icache_line_size() 16 - -#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h deleted file mode 100644 index 7ba7efca1f..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * ADM5120 GPIO wrappers for arch-neutral GPIO calls - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ASM_MIPS_MACH_ADM5120_GPIO_H -#define _ASM_MIPS_MACH_ADM5120_GPIO_H - -#define ARCH_NR_GPIOS 64 - -#include - -#include - -#define ADM5120_GPIO_PIN0 0 -#define ADM5120_GPIO_PIN1 1 -#define ADM5120_GPIO_PIN2 2 -#define ADM5120_GPIO_PIN3 3 -#define ADM5120_GPIO_PIN4 4 -#define ADM5120_GPIO_PIN5 5 -#define ADM5120_GPIO_PIN6 6 -#define ADM5120_GPIO_PIN7 7 -#define ADM5120_GPIO_P0L0 8 -#define ADM5120_GPIO_P0L1 9 -#define ADM5120_GPIO_P0L2 10 -#define ADM5120_GPIO_P1L0 11 -#define ADM5120_GPIO_P1L1 12 -#define ADM5120_GPIO_P1L2 13 -#define ADM5120_GPIO_P2L0 14 -#define ADM5120_GPIO_P2L1 15 -#define ADM5120_GPIO_P2L2 16 -#define ADM5120_GPIO_P3L0 17 -#define ADM5120_GPIO_P3L1 18 -#define ADM5120_GPIO_P3L2 19 -#define ADM5120_GPIO_P4L0 20 -#define ADM5120_GPIO_P4L1 21 -#define ADM5120_GPIO_P4L2 22 -#define ADM5120_GPIO_MAX 22 -#define ADM5120_GPIO_COUNT ADM5120_GPIO_MAX+1 - -#define ADM5120_GPIO_LOW 0 -#define ADM5120_GPIO_HIGH 1 - -#define ADM5120_GPIO_SWITCH 0x10 -#define ADM5120_GPIO_FLASH (ADM5120_GPIO_SWITCH | LED_MODE_FLASH) -#define ADM5120_GPIO_LINK (ADM5120_GPIO_SWITCH | LED_MODE_LINK) -#define ADM5120_GPIO_SPEED (ADM5120_GPIO_SWITCH | LED_MODE_SPEED) -#define ADM5120_GPIO_DUPLEX (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX) -#define ADM5120_GPIO_ACT (ADM5120_GPIO_SWITCH | LED_MODE_ACT) -#define ADM5120_GPIO_COLL (ADM5120_GPIO_SWITCH | LED_MODE_COLL) -#define ADM5120_GPIO_LINK_ACT (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT) -#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL) -#define ADM5120_GPIO_10M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT) -#define ADM5120_GPIO_100M_ACT (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT) - -extern int __adm5120_gpio0_get_value(unsigned gpio); -extern void __adm5120_gpio0_set_value(unsigned gpio, int value); -extern int __adm5120_gpio1_get_value(unsigned gpio); -extern void __adm5120_gpio1_set_value(unsigned gpio, int value); -extern int adm5120_gpio_to_irq(unsigned gpio); -extern int adm5120_irq_to_gpio(unsigned irq); - -static inline int gpio_get_value(unsigned gpio) -{ - int ret; - - switch (gpio) { - case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: - ret = __adm5120_gpio0_get_value(gpio); - break; - case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: - ret = __adm5120_gpio1_get_value(gpio - ADM5120_GPIO_P0L0); - break; - default: - ret = __gpio_get_value(gpio); - break; - } - - return ret; -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - switch (gpio) { - case ADM5120_GPIO_PIN0 ... ADM5120_GPIO_PIN7: - __adm5120_gpio0_set_value(gpio, value); - break; - case ADM5120_GPIO_P0L0 ... ADM5120_GPIO_P4L2: - __adm5120_gpio1_set_value(gpio - ADM5120_GPIO_P0L0, value); - break; - default: - __gpio_set_value(gpio, value); - break; - } -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return adm5120_gpio_to_irq(gpio); -} - -static inline int irq_to_gpio(unsigned irq) -{ - return adm5120_irq_to_gpio(irq); -} - -#define gpio_cansleep __gpio_cansleep - -#endif /* _ASM_MIPS_MACH_ADM5120_GPIO_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/irq.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/irq.h deleted file mode 100644 index b0350c8b83..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/irq.h +++ /dev/null @@ -1,43 +0,0 @@ -/* - * ADM5120 specific IRQ numbers - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef _ASM_MIPS_MACH_ADM5120_IRQ_H -#define _ASM_MIPS_MACH_ADM5120_IRQ_H - -#define MIPS_CPU_IRQ_BASE 0 -#define NR_IRQS 24 - -#include_next - -#include - -#define NO_IRQ (-1) - -#define MIPS_CPU_IRQ_COUNT 8 -#define MIPS_CPU_IRQ(x) (MIPS_CPU_IRQ_BASE + (x)) - -#define ADM5120_INTC_IRQ_BASE (MIPS_CPU_IRQ_BASE + MIPS_CPU_IRQ_COUNT) -#define ADM5120_INTC_IRQ(x) (ADM5120_INTC_IRQ_BASE + (x)) - -#define ADM5120_IRQ_INTC MIPS_CPU_IRQ(2) -#define ADM5120_IRQ_COUNTER MIPS_CPU_IRQ(7) - -#define ADM5120_IRQ_TIMER ADM5120_INTC_IRQ(INTC_IRQ_TIMER) -#define ADM5120_IRQ_UART0 ADM5120_INTC_IRQ(INTC_IRQ_UART0) -#define ADM5120_IRQ_UART1 ADM5120_INTC_IRQ(INTC_IRQ_UART1) -#define ADM5120_IRQ_USBC ADM5120_INTC_IRQ(INTC_IRQ_USBC) -#define ADM5120_IRQ_GPIO2 ADM5120_INTC_IRQ(INTC_IRQ_GPIO2) -#define ADM5120_IRQ_GPIO4 ADM5120_INTC_IRQ(INTC_IRQ_GPIO4) -#define ADM5120_IRQ_PCI0 ADM5120_INTC_IRQ(INTC_IRQ_PCI0) -#define ADM5120_IRQ_PCI1 ADM5120_INTC_IRQ(INTC_IRQ_PCI1) -#define ADM5120_IRQ_PCI2 ADM5120_INTC_IRQ(INTC_IRQ_PCI2) -#define ADM5120_IRQ_SWITCH ADM5120_INTC_IRQ(INTC_IRQ_SWITCH) - -#endif /* _ASM_MIPS_MACH_ADM5120_IRQ_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h deleted file mode 100644 index fa42bf7148..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/admboot.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * ADMBoot specific definitions - * - * Copyright (C) 2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ADMBOOT_H -#define _ADMBOOT_H - -extern int admboot_get_mac_base(u32 offset, u32 len, u8 *mac) __init; - -#endif /* _ADMBOOT_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h deleted file mode 100644 index 0cb3eee70e..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Broadcom's CFE definitions - * - * Copyright (C) 2006-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _PROM_CFE_H_ -#define _PROM_CFE_H_ - -extern int cfe_present(void) __init; -extern char *cfe_getenv(char *); - -#endif /*_PROM_CFE_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h deleted file mode 100644 index 778df24677..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Generic prom definitions - * - * Copyright (C) 2006-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _PROM_GENERIC_H_ -#define _PROM_GENERIC_H_ - -extern int generic_prom_present(void) __init; -extern char *generic_prom_getenv(char *); - -#endif /*_PROM_GENERIC_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h deleted file mode 100644 index ea8db81ed3..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Compex's MyLoader specific definitions - * - * Copyright (C) 2006-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _MYLOADER_H_ -#define _MYLOADER_H_ - -/* - * Firmware file format: - * - *
- * [] - * ... - * [] - * - * [] - * ... - * [] - * - * - */ - -/* Myloader specific magic numbers */ -#define MYLO_MAGIC_FIRMWARE 0x4C594D00 -#define MYLO_MAGIC_20021103 0x20021103 -#define MYLO_MAGIC_20021107 0x20021107 - -#define MYLO_MAGIC_SYS_PARAMS MYLO_MAGIC_20021107 -#define MYLO_MAGIC_PARTITIONS MYLO_MAGIC_20021103 -#define MYLO_MAGIC_BOARD_PARAMS MYLO_MAGIC_20021103 - -/* - * Addresses of the data structures provided by MyLoader - */ -#define MYLO_MIPS_SYS_PARAMS 0x80000800 /* System Parameters */ -#define MYLO_MIPS_BOARD_PARAMS 0x80000A00 /* Board Parameters */ -#define MYLO_MIPS_PARTITIONS 0x80000C00 /* Partition Table */ -#define MYLO_MIPS_BOOT_PARAMS 0x80000E00 /* Boot Parameters */ - -/* Vendor ID's (seems to be same as the PCI vendor ID's) */ -#define VENID_COMPEX 0x11F6 - -/* Devices based on the ADM5120 */ -#define DEVID_COMPEX_NP27G 0x0078 -#define DEVID_COMPEX_NP28G 0x044C -#define DEVID_COMPEX_NP28GHS 0x044E -#define DEVID_COMPEX_WP54Gv1C 0x0514 -#define DEVID_COMPEX_WP54G 0x0515 -#define DEVID_COMPEX_WP54AG 0x0546 -#define DEVID_COMPEX_WPP54AG 0x0550 -#define DEVID_COMPEX_WPP54G 0x0555 - -/* Devices based on the IXP422 */ -#define DEVID_COMPEX_WP18 0x047E -#define DEVID_COMPEX_NP18A 0x0489 - -/* Other devices */ -#define DEVID_COMPEX_NP26G8M 0x03E8 -#define DEVID_COMPEX_NP26G16M 0x03E9 - -struct mylo_fw_header { - uint32_t magic; /* must be MYLO_MAGIC_FIRMWARE */ - uint32_t crc; /* CRC of the whole firmware */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint16_t vid; /* vendor ID */ - uint16_t did; /* device ID */ - uint16_t svid; /* sub vendor ID */ - uint16_t sdid; /* sub device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; /* FIXME: firmware version high? */ - uint32_t fwlo; /* FIXME: firmware version low? */ - uint32_t flags; /* firmware flags */ -}; - -#define FW_FLAG_BOARD_PARAMS_WP 0x01 /* board parameters are write protected */ -#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */ - -struct mylo_fw_blockdesc { - uint32_t type; /* block type */ - uint32_t addr; /* relative address to flash start */ - uint32_t dlen; /* size of block data in bytes */ - uint32_t blen; /* total size of block in bytes */ -}; - -#define FW_DESC_TYPE_UNUSED 0 -#define FW_DESC_TYPE_USED 1 - -struct mylo_partition { - uint16_t flags; /* partition flags */ - uint16_t type; /* type of the partition */ - uint32_t addr; /* relative address of the partition from the - flash start */ - uint32_t size; /* size of the partition in bytes */ - uint32_t param; /* if this is the active partition, the - MyLoader load code to this address */ -}; - -#define PARTITION_FLAG_ACTIVE 0x8000 /* this is the active partition, - * MyLoader loads firmware from here */ -#define PARTITION_FLAG_ISRAM 0x2000 /* FIXME: this is a RAM partition? */ -#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */ -#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM - * before decompression */ -#define PARTITION_FLAG_HAVEHDR 0x0002 /* the partition data have a header */ - -#define PARTITION_TYPE_FREE 0 -#define PARTITION_TYPE_USED 1 - -#define MYLO_MAX_PARTITIONS 8 /* maximum number of partitions in the - partition table */ - -struct mylo_partition_table { - uint32_t magic; /* must be MYLO_MAGIC_PARTITIONS */ - uint32_t res0; /* unknown/unused */ - uint32_t res1; /* unknown/unused */ - uint32_t res2; /* unknown/unused */ - struct mylo_partition partitions[MYLO_MAX_PARTITIONS]; -}; - -struct mylo_partition_header { - uint32_t len; /* length of the partition data */ - uint32_t crc; /* CRC value of the partition data */ -}; - -struct mylo_system_params { - uint32_t magic; /* must be MYLO_MAGIC_SYS_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t mylo_ver; - uint16_t vid; /* Vendor ID */ - uint16_t did; /* Device ID */ - uint16_t svid; /* Sub Vendor ID */ - uint16_t sdid; /* Sub Device ID */ - uint32_t rev; /* device revision */ - uint32_t fwhi; - uint32_t fwlo; - uint32_t tftp_addr; - uint32_t prog_start; - uint32_t flash_size; /* Size of boot FLASH in bytes */ - uint32_t dram_size; /* Size of onboard RAM in bytes */ -}; - - -struct mylo_eth_addr { - uint8_t mac[6]; - uint8_t csum[2]; -}; - -#define MYLO_ETHADDR_COUNT 8 /* maximum number of ethernet address - in the board parameters */ - -struct mylo_board_params { - uint32_t magic; /* must be MYLO_MAGIC_BOARD_PARAMS */ - uint32_t res0; - uint32_t res1; - uint32_t res2; - struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT]; -}; - -struct myloader_info { - u32 vid; - u32 did; - u32 svid; - u32 sdid; - uint8_t macs[MYLO_ETHADDR_COUNT][6]; -}; - -extern struct myloader_info myloader_info; -extern int myloader_present(void) __init; - -#endif /* _MYLOADER_H_*/ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h deleted file mode 100644 index d5ad513d56..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h +++ /dev/null @@ -1,125 +0,0 @@ -/* - * Mikrotik's RouterBOOT definitions - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ROUTERBOOT_H -#define _ROUTERBOOT_H - -#define RB_MAC_SIZE 6 - -struct rb_bios_settings { - u32 hs_offs; /* hard settings offset */ - u32 hs_size; /* hard settings size */ - u32 fw_offs; /* firmware offset */ - u32 ss_offs; /* soft settings offset */ - u32 ss_size; /* soft settings size */ -}; - -struct rb_hard_settings { - char *name; /* board name */ - char *bios_ver; /* BIOS version */ - u32 mem_size; /* memory size in bytes */ - u32 mac_count; /* number of mac addresses */ - u8 *mac_base; /* mac address base */ -}; - -/* - * Magic numbers - */ -#define RB_MAGIC_HARD 0x64726148 /* "Hard" */ -#define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */ -#define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */ - -#define RB_ID_TERMINATOR 0 - -/* - * ID values for Hardware settings - */ -#define RB_ID_HARD_01 1 -#define RB_ID_HARD_02 2 -#define RB_ID_FLASH_INFO 3 -#define RB_ID_MAC_ADDRESS_PACK 4 -#define RB_ID_BOARD_NAME 5 -#define RB_ID_BIOS_VERSION 6 -#define RB_ID_HARD_07 7 -#define RB_ID_SDRAM_TIMINGS 8 -#define RB_ID_DEVICE_TIMINGS 9 -#define RB_ID_SOFTWARE_ID 10 -#define RB_ID_SERIAL_NUMBER 11 -#define RB_ID_HARD_12 12 -#define RB_ID_MEMORY_SIZE 13 -#define RB_ID_MAC_ADDRESS_COUNT 14 - -/* - * ID values for Software settings - */ -#define RB_ID_UART_SPEED 1 -#define RB_ID_BOOT_DELAY 2 -#define RB_ID_BOOT_DEVICE 3 -#define RB_ID_BOOT_KEY 4 -#define RB_ID_CPU_MODE 5 -#define RB_ID_FW_VERSION 6 -#define RB_ID_SOFT_07 7 -#define RB_ID_SOFT_08 8 -#define RB_ID_BOOT_PROTOCOL 9 -#define RB_ID_SOFT_10 10 -#define RB_ID_SOFT_11 11 - -/* - * UART_SPEED values - */ -#define RB_UART_SPEED_115200 0 -#define RB_UART_SPEED_57600 1 -#define RB_UART_SPEED_38400 2 -#define RB_UART_SPEED_19200 3 -#define RB_UART_SPEED_9600 4 -#define RB_UART_SPEED_4800 5 -#define RB_UART_SPEED_2400 6 -#define RB_UART_SPEED_1200 7 - -/* - * BOOT_DELAY values - */ -#define RB_BOOT_DELAY_0SEC 0 -#define RB_BOOT_DELAY_1SEC 1 -#define RB_BOOT_DELAY_2SEC 2 - -/* - * BOOT_DEVICE values - */ -#define RB_BOOT_DEVICE_ETHER 0 -#define RB_BOOT_DEVICE_NANDETH 1 -#define RB_BOOT_DEVICE_ETHONCE 2 -#define RB_BOOT_DEVICE_NANDONLY 3 - -/* - * BOOT_KEY values - */ -#define RB_BOOT_KEY_ANY 0 -#define RB_BOOT_KEY_DEL 1 - -/* - * CPU_MODE values - */ -#define RB_CPU_MODE_POWERSAVE 0 -#define RB_CPU_MODE_REGULAR 1 - -/* - * BOOT_PROTOCOL values - */ -#define RB_BOOT_PROTOCOL_BOOTP 0 -#define RB_BOOT_PROTOCOL_DHCP 1 - -extern int routerboot_present(void) __init; -extern char *routerboot_get_boardname(void); - -extern struct rb_hard_settings rb_hs; - -#endif /* _ROUTERBOOT_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h deleted file mode 100644 index d1e3e5b941..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h +++ /dev/null @@ -1,86 +0,0 @@ -/* - * ZyNOS (ZyXEL's Networking OS) definitions - * - * Copyright (C) 2007-2008 Gabor Juhos - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ - -#ifndef _ZYNOS_H -#define _ZYNOS_H - -#define ZYNOS_NAME_LEN 32 -#define ZYNOS_FEAT_BYTES 22 -#define ZYNOS_MAC_LEN 6 - -struct zynos_board_info { - unsigned char vendor[ZYNOS_NAME_LEN]; - unsigned char product[ZYNOS_NAME_LEN]; - u32 bootext_addr; - u32 res0; - u16 board_id; - u8 res1[6]; - u8 feat_other[ZYNOS_FEAT_BYTES]; - u8 feat_main; - u8 res2; - u8 mac[ZYNOS_MAC_LEN]; - u8 country; - u8 dbgflag; -} __attribute__ ((packed)); - -/* - * Vendor IDs - */ -#define ZYNOS_VENDOR_ID_ZYXEL 0 -#define ZYNOS_VENDOR_ID_NETGEAR 1 -#define ZYNOS_VENDOR_ID_DLINK 2 -#define ZYNOS_VENDOR_ID_OTHER 3 -#define ZYNOS_VENDOR_ID_LUCENT 4 - -/* - * Vendor names - */ -#define ZYNOS_VENDOR_DLINK "D-Link" -#define ZYNOS_VENDOR_LUCENT "LUCENT" -#define ZYNOS_VENDOR_NETGEAR "NetGear" -#define ZYNOS_VENDOR_ZYXEL "ZyXEL" - -/* - * Board IDs (big-endian) - */ -#define ZYNOS_BOARD_ES2108 0x00F2 /* Ethernet Switch 2108 */ -#define ZYNOS_BOARD_ES2108F 0x01AF /* Ethernet Switch 2108-F */ -#define ZYNOS_BOARD_ES2108G 0x00F3 /* Ethernet Switch 2108-G */ -#define ZYNOS_BOARD_ES2108LC 0x00FC /* Ethernet Switch 2108-LC */ -#define ZYNOS_BOARD_ES2108PWR 0x00F4 /* Ethernet Switch 2108PWR */ -#define ZYNOS_BOARD_HS100 0x9FF1 /* HomeSafe 100/100W */ -#define ZYNOS_BOARD_P334 0x9FF5 /* Prestige 334 */ -#define ZYNOS_BOARD_P334U 0x9FDD /* Prestige 334U */ -#define ZYNOS_BOARD_P334W 0x9FF3 /* Prestige 334W */ -#define ZYNOS_BOARD_P334WH 0x00E0 /* Prestige 334WH */ -#define ZYNOS_BOARD_P334WHD 0x00E1 /* Prestige 334WHD */ -#define ZYNOS_BOARD_P334WT 0x9FEF /* Prestige 334WT */ -#define ZYNOS_BOARD_P334WT_ALT 0x9F02 /* Prestige 334WT alternative*/ -#define ZYNOS_BOARD_P335 0x9FED /* Prestige 335/335WT */ -#define ZYNOS_BOARD_P335PLUS 0x0025 /* Prestige 335Plus */ -#define ZYNOS_BOARD_P335U 0x9FDC /* Prestige 335U */ - -/* - * Some magic numbers (big-endian) - */ -#define ZYNOS_MAGIC_DBGAREA1 0x48646267 /* "Hdbg" */ -#define ZYNOS_MAGIC_DBGAREA2 0x61726561 /* "area" */ - -struct bootbase_info { - u16 vendor_id; - u16 board_id; - u8 mac[6]; -}; - -extern struct bootbase_info bootbase_info; -extern int bootbase_present(void) __init; - -#endif /* _ZYNOS_H */ diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h deleted file mode 100644 index 87c35f375b..0000000000 --- a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle - */ -#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H -#define __ASM_MIPS_MACH_ADM5120_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */ -- 2.30.2