From 41669cc581e5e9df0168ecd53de90a64c07e9ad6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 22 Mar 2009 14:46:58 +0000 Subject: [PATCH] atheros: clean up the 2.6.28 port in preparation for pushing it upstream SVN-Revision: 14967 --- .../madwifi/patches/410-ar231x_2.6.28.patch | 281 ++ target/linux/atheros/config-2.6.28 | 35 +- .../files-2.6.28/arch/mips/atheros/Kconfig | 27 - .../files-2.6.28/arch/mips/atheros/Makefile | 13 - .../arch/mips/atheros/ar5312/Makefile | 11 - .../arch/mips/atheros/ar5312/board.c | 473 --- .../arch/mips/atheros/ar5312/irq.c | 174 - .../arch/mips/atheros/ar5315/Makefile | 12 - .../arch/mips/atheros/ar5315/board.c | 414 -- .../arch/mips/atheros/ar5315/irq.c | 359 -- .../arch/mips/atheros/ar5315/pci.c | 265 -- .../files-2.6.28/arch/mips/atheros/board.c | 299 -- .../files-2.6.28/arch/mips/atheros/prom.c | 45 - .../files-2.6.28/arch/mips/atheros/reset.c | 162 - .../include/asm/mach-atheros/ar5312/ar5312.h | 234 -- .../include/asm/mach-atheros/ar5315/ar5315.h | 694 ---- .../mips/include/asm/mach-atheros/ar531x.h | 149 - .../asm/mach-atheros/ar531x_platform.h | 28 - .../asm/mach-atheros/cpu-feature-overrides.h | 84 - .../include/asm/mach-atheros/dma-coherence.h | 41 - .../arch/mips/include/asm/mach-atheros/gpio.h | 118 - .../mips/include/asm/mach-atheros/reset.h | 6 - .../arch/mips/include/asm/mach-atheros/war.h | 25 - .../drivers/mtd/devices/spiflash.c | 533 --- .../drivers/mtd/devices/spiflash.h | 120 - .../files-2.6.28/drivers/net/ar2313/Makefile | 5 - .../files-2.6.28/drivers/net/ar2313/ar2313.c | 1409 ------- .../files-2.6.28/drivers/net/ar2313/ar2313.h | 195 - .../files-2.6.28/drivers/net/ar2313/dma.h | 142 - .../drivers/watchdog/ar2315-wtd.c | 198 - ... => 001-get_c0_compare_irq_function.patch} | 19 +- ...ch => 002-mips_clocksource_init_war.patch} | 0 .../atheros/patches-2.6.28/100-board.patch | 3528 ++++++++++++++++- .../patches-2.6.28/110-ar2313_ethernet.patch | 1600 ++++++++ .../atheros/patches-2.6.28/110-spiflash.patch | 20 - .../atheros/patches-2.6.28/120-spiflash.patch | 661 +++ .../atheros/patches-2.6.28/120-watchdog.patch | 25 - .../patches-2.6.28/130-ar2313_ethernet.patch | 25 - .../atheros/patches-2.6.28/130-watchdog.patch | 228 ++ .../patches-2.6.28/135-ar2313_2.6.26.patch | 11 - .../patches-2.6.28/137-ar2313_2.6.28.patch | 144 - .../200-ar2313_enable_mvswitch.patch | 30 +- 42 files changed, 6297 insertions(+), 6545 deletions(-) create mode 100644 package/madwifi/patches/410-ar231x_2.6.28.patch delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h delete mode 100644 target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h delete mode 100644 target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c delete mode 100644 target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h delete mode 100644 target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile delete mode 100644 target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c delete mode 100644 target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h delete mode 100644 target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h delete mode 100644 target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c rename target/linux/atheros/patches-2.6.28/{901-get_c0_compare_irq_function.patch => 001-get_c0_compare_irq_function.patch} (75%) rename target/linux/atheros/patches-2.6.28/{902-mips_clocksource_init_war.patch => 002-mips_clocksource_init_war.patch} (100%) create mode 100644 target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch delete mode 100644 target/linux/atheros/patches-2.6.28/110-spiflash.patch create mode 100644 target/linux/atheros/patches-2.6.28/120-spiflash.patch delete mode 100644 target/linux/atheros/patches-2.6.28/120-watchdog.patch delete mode 100644 target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch create mode 100644 target/linux/atheros/patches-2.6.28/130-watchdog.patch delete mode 100644 target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch delete mode 100644 target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch diff --git a/package/madwifi/patches/410-ar231x_2.6.28.patch b/package/madwifi/patches/410-ar231x_2.6.28.patch new file mode 100644 index 0000000000..87177c3986 --- /dev/null +++ b/package/madwifi/patches/410-ar231x_2.6.28.patch @@ -0,0 +1,281 @@ +--- a/ath/if_ath_ahb.c ++++ b/ath/if_ath_ahb.c +@@ -33,20 +33,15 @@ + #include "if_ath_ahb.h" + #include "ah_soc.h" + +-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) +-#error "Kernel versions older than 2.6.19 are not supported!" ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ++#include + #endif + + struct ath_ahb_softc { + struct ath_softc aps_sc; +-#ifdef CONFIG_PM +- u32 aps_pmstate[16]; +-#endif ++ struct ar531x_config aps_config; + }; + +-static struct ath_ahb_softc *sclist[2] = {NULL, NULL}; +-static u_int8_t num_activesc = 0; +- + /* + * Module glue. + */ +@@ -101,13 +96,13 @@ ahb_enable_wmac(u_int16_t devid, u_int16 + while (REG_READ(AR5315_PCI_MAC_PCICFG) & AR5315_PCI_MAC_PCICFG_SPWR_DN); + } else { + switch (wlanNum) { +- case AR531X_WLAN0_NUM: ++ case 0: + reset = (AR531X_RESET_WLAN0 | + AR531X_RESET_WARM_WLAN0_MAC | + AR531X_RESET_WARM_WLAN0_BB); + enable = AR531X_ENABLE_WLAN0; + break; +- case AR531X_WLAN1_NUM: ++ case 1: + reset = (AR531X_RESET_WLAN1 | + AR531X_RESET_WARM_WLAN1_MAC | + AR531X_RESET_WARM_WLAN1_BB); +@@ -144,10 +139,10 @@ ahb_disable_wmac(u_int16_t devid, u_int1 + *en &= ~AR5315_ARB_WLAN; + } else { + switch (wlanNum) { +- case AR531X_WLAN0_NUM: ++ case 0: + enable = AR531X_ENABLE_WLAN0; + break; +- case AR531X_WLAN1_NUM: ++ case 1: + enable = AR531X_ENABLE_WLAN1; + break; + default: +@@ -159,29 +154,6 @@ ahb_disable_wmac(u_int16_t devid, u_int1 + } + + +-static int +-exit_ath_wmac(u_int16_t wlanNum, struct ar531x_config *config) +-{ +- struct ath_ahb_softc *sc = sclist[wlanNum]; +- struct net_device *dev; +- u_int16_t devid; +- +- if (sc == NULL) +- return -ENODEV; /* XXX: correct return value? */ +- +- dev = sc->aps_sc.sc_dev; +- ath_detach(dev); +- if (dev->irq) +- free_irq(dev->irq, dev); +- devid = sc->aps_sc.devid; +- config->tag = (void *)((unsigned long) devid); +- +- ahb_disable_wmac(devid, wlanNum); +- free_netdev(dev); +- sclist[wlanNum] = NULL; +- return 0; +-} +- + static const char ubnt[] = "Ubiquiti Networks"; + static const struct ath_hw_detect cards[] = { + { +@@ -266,6 +238,114 @@ static const struct ath_hw_detect cards[ + }, + }; + ++static void ++ahb_hw_detect(struct ath_ahb_softc *sc, const char *radio) ++{ ++ u16 *radio_data = (u16 *) radio; ++ if (radio_data) { ++ u16 vendor, id, subvendor, subid; ++ vendor = radio_data[1]; ++ id = radio_data[0]; ++ subvendor = radio_data[8]; ++ subid = radio_data[7]; ++ ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid); ++ } ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ++ ++static int ahb_wmac_probe(struct platform_device *pdev) ++{ ++ struct ar231x_board_config *bcfg = pdev->dev.platform_data; ++ struct ath_ahb_softc *sc; ++ struct net_device *dev; ++ struct resource *res; ++ const char *athname; ++ int err; ++ ++ ahb_enable_wmac(bcfg->devid, pdev->id); ++ dev = alloc_netdev(sizeof(struct ath_ahb_softc), "wifi%d", ether_setup); ++ if (!dev) ++ return -ENOMEM; ++ ++ sc = dev->priv; ++ sc->aps_sc.sc_dev = dev; ++ ++ dev->irq = platform_get_irq(pdev, 0); ++ if (dev->irq <= 0) { ++ printk("%s: Cannot find IRQ resource\n", dev->name); ++ goto error; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ printk("%s: Cannot find MMIO resource\n", dev->name); ++ goto error; ++ } ++ ++ dev->mem_start = KSEG1ADDR(res->start); ++ dev->mem_end = KSEG1ADDR(res->end); ++ sc->aps_sc.sc_iobase = (void __iomem *) dev->mem_start; ++ sc->aps_sc.sc_bdev = NULL; ++ ++ /* bus information for the HAL */ ++ sc->aps_config.board = (const struct ar531x_boarddata *) bcfg->config; ++ sc->aps_config.radio = bcfg->radio; ++ sc->aps_config.unit = pdev->id; ++ sc->aps_config.tag = NULL; ++ ++ err = ath_attach(bcfg->devid, dev, &sc->aps_config); ++ if (err != 0) { ++ printk("%s: ath_attach failed: %d\n", dev->name, err); ++ goto error; ++ } ++ ++ athname = ath_hal_probe(ATHEROS_VENDOR_ID, bcfg->devid); ++ printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n", ++ dev_info, dev->name, athname ? athname : "Atheros ???", dev->mem_start, dev->irq); ++ ++ if (request_irq(dev->irq, ath_intr, IRQF_SHARED|IRQF_DISABLED, dev->name, dev)) { ++ printk(KERN_WARNING "%s: %s: request_irq failed\n", dev_info, dev->name); ++ goto error; ++ } ++ ++ sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */ ++ sc->aps_sc.sc_ledpin = bcfg->config->sysLedGpio; ++ sc->aps_sc.sc_invalid = 0; ++ ahb_hw_detect(sc, bcfg->radio); ++ platform_set_drvdata(pdev, dev); ++ return 0; ++ ++error_dev: ++ free_irq(dev->irq, dev); ++error: ++ free_netdev(dev); ++ ++ return -ENODEV; ++} ++ ++ ++static int ahb_wmac_remove(struct platform_device *pdev) ++{ ++ struct ar231x_board_config *bcfg = pdev->dev.platform_data; ++ struct net_device *dev; ++ ++ dev = platform_get_drvdata(pdev); ++ ath_detach(dev); ++ ++ if (dev->irq) ++ free_irq(dev->irq, dev); ++ ++ ahb_disable_wmac(bcfg->devid, pdev->id); ++ free_netdev(dev); ++ ++ return 0; ++} ++ ++#else ++ ++static struct ath_ahb_softc *sclist[2] = {NULL, NULL}; ++ + static int + init_ath_wmac(u_int16_t devid, u_int16_t wlanNum, struct ar531x_config *config) + { +@@ -318,7 +398,7 @@ init_ath_wmac(u_int16_t devid, u_int16_t + sc->aps_sc.sc_iobase = (void __iomem *) dev->mem_start; + sc->aps_sc.sc_bdev = NULL; + +- if (request_irq(dev->irq, ath_intr, IRQF_SHARED, dev->name, dev)) { ++ if (request_irq(dev->irq, ath_intr, IRQF_SHARED|IRQF_DISABLED, dev->name, dev)) { + printk(KERN_WARNING "%s: %s: request_irq failed\n", dev_info, dev->name); + goto bad3; + } +@@ -328,21 +408,12 @@ init_ath_wmac(u_int16_t devid, u_int16_t + athname = ath_hal_probe(ATHEROS_VENDOR_ID, devid); + printk(KERN_INFO "%s: %s: %s: mem=0x%lx, irq=%d\n", + dev_info, dev->name, athname ? athname : "Atheros ???", dev->mem_start, dev->irq); +- num_activesc++; + /* Ready to process interrupts */ + + sc->aps_sc.sc_softled = 1; /* SoftLED over GPIO */ + sc->aps_sc.sc_ledpin = config->board->sysLedGpio; + sc->aps_sc.sc_invalid = 0; +- radio_data = (u16 *) config->radio; +- if (radio_data) { +- u16 vendor, id, subvendor, subid; +- vendor = radio_data[1]; +- id = radio_data[0]; +- subvendor = radio_data[8]; +- subid = radio_data[7]; +- ath_hw_detect(&sc->aps_sc, cards, ARRAY_SIZE(cards), vendor, id, subvendor, subid); +- } ++ ahb_hw_detect(sc, config->radio); + + return 0; + +@@ -357,6 +428,29 @@ init_ath_wmac(u_int16_t devid, u_int16_t + return -ENODEV; + } + ++static int ++exit_ath_wmac(u_int16_t wlanNum, struct ar531x_config *config) ++{ ++ struct ath_ahb_softc *sc = sclist[wlanNum]; ++ struct net_device *dev; ++ u_int16_t devid; ++ ++ if (sc == NULL) ++ return -ENODEV; /* XXX: correct return value? */ ++ ++ dev = sc->aps_sc.sc_dev; ++ ath_detach(dev); ++ if (dev->irq) ++ free_irq(dev->irq, dev); ++ devid = sc->aps_sc.devid; ++ config->tag = (void *)((unsigned long) devid); ++ ++ ahb_disable_wmac(devid, wlanNum); ++ free_netdev(dev); ++ sclist[wlanNum] = NULL; ++ return 0; ++} ++ + static int ahb_wmac_probe(struct platform_device *pdev) + { + u_int16_t devid; +@@ -377,11 +471,18 @@ static int ahb_wmac_remove(struct platfo + return 0; + } + ++#endif ++ + static struct platform_driver ahb_wmac_driver = { ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28) ++ .driver.name = "ar231x-wmac", ++#else + .driver.name = "ar531x-wmac", ++#endif + .probe = ahb_wmac_probe, + .remove = ahb_wmac_remove + }; ++ + int + ath_ioctl_ethtool(struct ath_softc *sc, int cmd, void __user *addr) + { diff --git a/target/linux/atheros/config-2.6.28 b/target/linux/atheros/config-2.6.28 index e55b52fb58..f57e02a5dc 100644 --- a/target/linux/atheros/config-2.6.28 +++ b/target/linux/atheros/config-2.6.28 @@ -1,6 +1,6 @@ CONFIG_32BIT=y # CONFIG_64BIT is not set -CONFIG_AR2313=y +CONFIG_AR231X_ETHERNET=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -8,16 +8,13 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ATHEROS=y +CONFIG_ATHEROS_AR2315=y +CONFIG_ATHEROS_AR2315_PCI=y CONFIG_ATHEROS_AR5312=y -CONFIG_ATHEROS_AR5315=y -CONFIG_ATHEROS_AR5315_PCI=y CONFIG_ATHEROS_WDT=y -# CONFIG_ATM is not set -# CONFIG_ATMEL is not set CONFIG_BASE_SMALL=0 # CONFIG_BCM47XX is not set CONFIG_BITREVERSE=y -# CONFIG_BT is not set CONFIG_CEVT_R4K=y CONFIG_CLASSIC_RCU=y CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit" @@ -51,12 +48,6 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_VR41XX is not set -# CONFIG_CRYPTO_AEAD2 is not set -# CONFIG_CRYPTO_ALGAPI2 is not set -# CONFIG_CRYPTO_BLKCIPHER2 is not set -# CONFIG_CRYPTO_HASH2 is not set -# CONFIG_CRYPTO_MANAGER2 is not set -# CONFIG_CRYPTO_RNG2 is not set CONFIG_CSRC_R4K=y CONFIG_DEVPORT=y # CONFIG_DM9000 is not set @@ -64,7 +55,6 @@ CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_DMA_NONCOHERENT=y # CONFIG_FIXED_PHY is not set # CONFIG_FREEZER is not set -CONFIG_FS_POSIX_ACL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CMOS_UPDATE=y @@ -81,7 +71,6 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_HAVE_IDE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HERMES is not set CONFIG_HW_HAS_PCI=y CONFIG_HW_RANDOM=y # CONFIG_I2C is not set @@ -91,8 +80,6 @@ CONFIG_HW_RANDOM=y CONFIG_ICPLUS_PHY=y # CONFIG_IDE is not set CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set CONFIG_IRQ_CPU=y # CONFIG_ISDN is not set CONFIG_KMOD=y @@ -120,6 +107,7 @@ CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_SIM is not set CONFIG_MTD=y # CONFIG_MTD_ABSENT is not set +CONFIG_MTD_AR2315=y CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_MTD_BLOCK2MTD is not set @@ -168,9 +156,7 @@ CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_PARTS_READONLY=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_SLRAM is not set -CONFIG_MTD_SPIFLASH=y # CONFIG_NET_PCI is not set -CONFIG_NF_CT_ACCT=y # CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_NO_IOPORT is not set # CONFIG_NXP_STB220 is not set @@ -191,11 +177,10 @@ CONFIG_PHYLIB=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PROBE_INITRD_HEADER is not set # CONFIG_PROM_EMU is not set -CONFIG_RFKILL_LEDS=y CONFIG_RTC_LIB=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_SCSI_WAIT_SCAN is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 @@ -211,9 +196,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=1 # CONFIG_SIBYTE_RHONE is not set # CONFIG_SIBYTE_SENTOSA is not set # CONFIG_SIBYTE_SWARM is not set -CONFIG_SND_MIPS=y # CONFIG_SOFT_WATCHDOG is not set -CONFIG_SOUND_OSS_CORE=y CONFIG_SSB_POSSIBLE=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y @@ -222,14 +205,6 @@ CONFIG_SYS_SUPPORTS_ARBIT_HZ=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_TICK_ONESHOT=y CONFIG_TRAD_SIGNALS=y -# CONFIG_USB is not set -# CONFIG_USB_EHCI_HCD is not set -CONFIG_USB_STORAGE_CYPRESS_ATACB=y CONFIG_USB_SUPPORT=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_WDM is not set # CONFIG_VGASTATE is not set -# CONFIG_VIDEO_MEDIA is not set -# CONFIG_VIDEO_V4L2 is not set -# CONFIG_VIDEO_V4L2_COMMON is not set CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig deleted file mode 100644 index 953f0cb5b1..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Kconfig +++ /dev/null @@ -1,27 +0,0 @@ -config ATHEROS_AR5312 - bool "Atheros 5312/2312+ support" - depends on ATHEROS - default y - -config ATHEROS_AR5315 - bool "Atheros 5315/2315+ support" - depends on ATHEROS - select DMA_NONCOHERENT - select CEVT_R4K - select CSRC_R4K - select IRQ_CPU - select SYS_HAS_CPU_MIPS32_R1 - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_BIG_ENDIAN - select GENERIC_GPIO - default y - -config ATHEROS_AR5315_PCI - bool "PCI support" - select HW_HAS_PCI - select PCI - select USB_ARCH_HAS_HCD - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI - depends on ATHEROS_AR5315 - default n diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile deleted file mode 100644 index 2c2b991bc4..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2006 FON Technology, SL. -# Copyright (C) 2006 Imre Kaloz -# Copyright (C) 2006 Felix Fietkau -# - -obj-y += board.o prom.o reset.o -obj-$(CONFIG_ATHEROS_AR5312) += ar5312/ -obj-$(CONFIG_ATHEROS_AR5315) += ar5315/ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile deleted file mode 100644 index 6c50d9931d..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2007 FON Technology, SL. -# Copyright (C) 2007 Imre Kaloz -# Copyright (C) 2007 Felix Fietkau -# - -obj-y := board.o irq.o diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c deleted file mode 100644 index 938db11bc8..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/board.c +++ /dev/null @@ -1,473 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NO_PHY 0x1f - -static int is_5312 = 0; -static struct platform_device *ar5312_devs[6]; - -static struct resource ar5312_eth0_res[] = { - { - .name = "eth0_membase", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR531X_ENET0), - .end = KSEG1ADDR(AR531X_ENET0 + 0x2000), - }, - { - .name = "eth0_irq", - .flags = IORESOURCE_IRQ, - .start = AR5312_IRQ_ENET0_INTRS, - .end = AR5312_IRQ_ENET0_INTRS, - }, -}; -static struct ar531x_eth ar5312_eth0_data = { - .phy = NO_PHY, - .mac = 0, - .reset_base = AR531X_RESET, - .reset_mac = AR531X_RESET_ENET0, - .reset_phy = AR531X_RESET_EPHY0, - .phy_base = KSEG1ADDR(AR531X_ENET0), -}; - -static struct resource ar5312_eth1_res[] = { - { - .name = "eth1_membase", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR531X_ENET1), - .end = KSEG1ADDR(AR531X_ENET1 + 0x2000), - }, - { - .name = "eth1_irq", - .flags = IORESOURCE_IRQ, - .start = AR5312_IRQ_ENET1_INTRS, - .end = AR5312_IRQ_ENET1_INTRS, - }, -}; -static struct ar531x_eth ar5312_eth1_data = { - .phy = NO_PHY, - .mac = 1, - .reset_base = AR531X_RESET, - .reset_mac = AR531X_RESET_ENET1, - .reset_phy = AR531X_RESET_EPHY1, - .phy_base = KSEG1ADDR(AR531X_ENET1), -}; - -static struct platform_device ar5312_eth[] = { - { - .id = 0, - .name = "ar531x-eth", - .dev.platform_data = &ar5312_eth0_data, - .resource = ar5312_eth0_res, - .num_resources = ARRAY_SIZE(ar5312_eth0_res) - }, - { - .id = 1, - .name = "ar531x-eth", - .dev.platform_data = &ar5312_eth1_data, - .resource = ar5312_eth1_res, - .num_resources = ARRAY_SIZE(ar5312_eth1_res) - }, -}; - - -/* - * AR2312/3 ethernet uses the PHY of ENET0, but the MAC - * of ENET1. Atheros calls it 'twisted' for a reason :) - */ -static struct resource ar231x_eth0_res[] = { - { - .name = "eth0_membase", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR531X_ENET1), - .end = KSEG1ADDR(AR531X_ENET1 + 0x2000), - }, - { - .name = "eth0_irq", - .flags = IORESOURCE_IRQ, - .start = AR5312_IRQ_ENET1_INTRS, - .end = AR5312_IRQ_ENET1_INTRS, - }, -}; -static struct ar531x_eth ar231x_eth0_data = { - .phy = 1, - .mac = 1, - .reset_base = AR531X_RESET, - .reset_mac = AR531X_RESET_ENET1, - .reset_phy = AR531X_RESET_EPHY1, - .phy_base = KSEG1ADDR(AR531X_ENET0), -}; -static struct platform_device ar231x_eth0 = { - .id = 0, - .name = "ar531x-eth", - .dev.platform_data = &ar231x_eth0_data, - .resource = ar231x_eth0_res, - .num_resources = ARRAY_SIZE(ar231x_eth0_res) -}; - - -static struct platform_device ar5312_wmac[] = { - { - .id = 0, - .name = "ar531x-wmac", - }, - { - .id = 1, - .name = "ar531x-wmac", - }, -}; - -static struct physmap_flash_data ar5312_flash_data = { - .width = 2, -}; - -static struct resource ar5312_flash_resource = { - .start = AR531X_FLASH, - .end = AR531X_FLASH + 0x800000 - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ar5312_physmap_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ar5312_flash_data, - }, - .num_resources = 1, - .resource = &ar5312_flash_resource, -}; - -#ifdef CONFIG_LEDS_GPIO -static struct gpio_led ar5312_leds[] = { - { .name = "wlan", .gpio = 0, .active_low = 1, }, -}; - -static const struct gpio_led_platform_data ar5312_led_data = { - .num_leds = ARRAY_SIZE(ar5312_leds), - .leds = (void *) ar5312_leds, -}; - -static struct platform_device ar5312_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = (void *) &ar5312_led_data, - } -}; -#endif - -/* - * NB: This mapping size is larger than the actual flash size, - * but this shouldn't be a problem here, because the flash - * will simply be mapped multiple times. - */ -static char __init *ar5312_flash_limit(void) -{ - u32 ctl; - /* - * Configure flash bank 0. - * Assume 8M window size. Flash will be aliased if it's smaller - */ - ctl = FLASHCTL_E | - FLASHCTL_AC_8M | - FLASHCTL_RBLE | - (0x01 << FLASHCTL_IDCY_S) | - (0x07 << FLASHCTL_WST1_S) | - (0x07 << FLASHCTL_WST2_S) | - (sysRegRead(AR531X_FLASHCTL0) & FLASHCTL_MW); - - sysRegWrite(AR531X_FLASHCTL0, ctl); - - /* Disable other flash banks */ - sysRegWrite(AR531X_FLASHCTL1, - sysRegRead(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); - - sysRegWrite(AR531X_FLASHCTL2, - sysRegRead(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); - - return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000); -} - -static struct ar531x_config __init *init_wmac(int unit) -{ - struct ar531x_config *config; - - config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL); - config->board = board_config; - config->radio = radio_config; - config->unit = unit; - config->tag = (u_int16_t) ((sysRegRead(AR531X_REV) >> AR531X_REV_WMAC_MIN_S) & AR531X_REV_CHIP); - - return config; -} - -int __init ar5312_init_devices(void) -{ - struct ar531x_boarddata *bcfg; - char *radio, *c; - int dev = 0; - uint32_t fctl = 0; - - if (!is_5312) - return 0; - - /* Locate board/radio config data */ - ar531x_find_config(ar5312_flash_limit()); - bcfg = (struct ar531x_boarddata *) board_config; - - - /* - * Chip IDs and hardware detection for some Atheros - * models are really broken! - * - * Atheros uses a disabled WMAC0 and Silicon ID of AR5312 - * as indication for AR2312, which is otherwise - * indistinguishable from the real AR5312. - */ - if (radio_config) { - radio = radio_config + AR531X_RADIO_MASK_OFF; - if ((*((u32 *) radio) & AR531X_RADIO0_MASK) == 0) - bcfg->config |= BD_ISCASPER; - } else - radio = NULL; - - /* AR2313 has CPU minor rev. 10 */ - if ((current_cpu_data.processor_id & 0xff) == 0x0a) - mips_machtype = MACH_ATHEROS_AR2313; - - /* AR2312 shares the same Silicon ID as AR5312 */ - else if (bcfg->config & BD_ISCASPER) - mips_machtype = MACH_ATHEROS_AR2312; - - /* Everything else is probably AR5312 or compatible */ - else - mips_machtype = MACH_ATHEROS_AR5312; - - ar5312_eth0_data.board_config = board_config; - ar5312_eth1_data.board_config = board_config; - - /* fixup flash width */ - fctl = sysRegRead(AR531X_FLASHCTL) & FLASHCTL_MW; - switch (fctl) { - case FLASHCTL_MWx16: - ar5312_flash_data.width = 2; - break; - case FLASHCTL_MWx8: - default: - ar5312_flash_data.width = 1; - break; - } - - ar5312_devs[dev++] = &ar5312_physmap_flash; - -#ifdef CONFIG_LEDS_GPIO - ar5312_leds[0].gpio = bcfg->sysLedGpio; - ar5312_devs[dev++] = &ar5312_gpio_leds; -#endif - - if (!memcmp(bcfg->enet0Mac, "\xff\xff\xff\xff\xff\xff", 6)) - memcpy(bcfg->enet0Mac, bcfg->enet1Mac, 6); - - if (memcmp(bcfg->enet0Mac, bcfg->enet1Mac, 6) == 0) { - /* ENET0 and ENET1 have the same mac. - * Increment the one from ENET1 */ - c = bcfg->enet1Mac + 5; - while ((c >= (char *) bcfg->enet1Mac) && !(++(*c))) - c--; - } - - switch(mips_machtype) { - case MACH_ATHEROS_AR5312: - ar5312_eth0_data.macaddr = bcfg->enet0Mac; - ar5312_eth1_data.macaddr = bcfg->enet1Mac; - ar5312_devs[dev++] = &ar5312_eth[0]; - ar5312_devs[dev++] = &ar5312_eth[1]; - break; - case MACH_ATHEROS_AR2312: - case MACH_ATHEROS_AR2313: - ar231x_eth0_data.macaddr = bcfg->enet0Mac; - ar5312_devs[dev++] = &ar231x_eth0; - ar5312_flash_data.width = 1; - break; - } - - if (radio) { - if (mips_machtype == MACH_ATHEROS_AR5312) { - if (*((u32 *) radio) & AR531X_RADIO0_MASK) { - ar5312_wmac[0].dev.platform_data = init_wmac(0); - ar5312_devs[dev++] = &ar5312_wmac[0]; - } - } - if (*((u32 *) radio) & AR531X_RADIO1_MASK) { - ar5312_wmac[1].dev.platform_data = init_wmac(1); - ar5312_devs[dev++] = &ar5312_wmac[1]; - } - } - - return platform_add_devices(ar5312_devs, dev); -} - - -static void ar5312_halt(void) -{ - while (1); -} - -static void ar5312_power_off(void) -{ - ar5312_halt(); -} - - -static void ar5312_restart(char *command) -{ - /* reset the system */ - for(;;) sysRegWrite(AR531X_RESET, AR531X_RESET_SYSTEM); -} - - -/* - * This table is indexed by bits 5..4 of the CLOCKCTL1 register - * to determine the predevisor value. - */ -static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { - 1, - 2, - 4, - 5 -}; - - -static unsigned int __init ar5312_cpu_frequency(void) -{ - unsigned int result; - unsigned int predivide_mask, predivide_shift; - unsigned int multiplier_mask, multiplier_shift; - unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier; - unsigned int doubler_mask; - unsigned int wisoc_revision; - - /* Trust the bootrom's idea of cpu frequency. */ - if ((result = sysRegRead(AR5312_SCRATCH))) - return result; - - wisoc_revision = (sysRegRead(AR531X_REV) & AR531X_REV_MAJ) >> AR531X_REV_MAJ_S; - if (wisoc_revision == AR531X_REV_MAJ_AR2313) { - predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; - predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; - multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; - multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; - doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; - } else { /* AR5312 and AR2312 */ - predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; - predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; - multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; - multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; - doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; - } - - /* - * Clocking is derived from a fixed 40MHz input clock. - * - * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) - * sysFreq = cpuFreq / 4 (used for APB clock, serial, - * flash, Timer, Watchdog Timer) - * - * cntFreq = cpuFreq / 2 (use for CPU count/compare) - * - * So, for example, with a PLL multiplier of 5, we have - * - * cpuFreq = 200MHz - * sysFreq = 50MHz - * cntFreq = 100MHz - * - * We compute the CPU frequency, based on PLL settings. - */ - - clockCtl1 = sysRegRead(AR5312_CLOCKCTL1); - preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift; - preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; - multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift; - - if (clockCtl1 & doubler_mask) { - multiplier = multiplier << 1; - } - return (40000000 / preDivisor) * multiplier; -} - -static inline int ar5312_sys_frequency(void) -{ - return ar5312_cpu_frequency() / 4; -} - -static void __init ar5312_time_init(void) -{ - mips_hpt_frequency = ar5312_cpu_frequency() / 2; -} - - -void __init ar5312_prom_init(void) -{ - u32 memsize, memcfg, bank0AC, bank1AC; - - is_5312 = 1; - - /* Detect memory size */ - memcfg = sysRegRead(AR531X_MEM_CFG1); - bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S; - bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; - memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) - + (bank1AC ? (1 << (bank1AC+1)) : 0); - memsize <<= 20; - add_memory_region(0, memsize, BOOT_MEM_RAM); - - /* Initialize it to AR5312 for now. Real detection will be done - * in ar5312_init_devices() */ - mips_machtype = MACH_ATHEROS_AR5312; -} - -void __init ar5312_plat_setup(void) -{ - /* Clear any lingering AHB errors */ - sysRegRead(AR531X_PROCADDR); - sysRegRead(AR531X_DMAADDR); - sysRegWrite(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); - - board_time_init = ar5312_time_init; - - _machine_restart = ar5312_restart; - _machine_halt = ar5312_halt; - pm_power_off = ar5312_power_off; - - serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency()); -} - -arch_initcall(ar5312_init_devices); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c deleted file mode 100644 index 0cbdc8ed22..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5312/irq.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -/* - * Called when an interrupt is received, this function - * determines exactly which interrupt it was, and it - * invokes the appropriate handler. - * - * Implicitly, we also define interrupt priority by - * choosing which to dispatch first. - */ -asmlinkage void ar5312_irq_dispatch(void) -{ - int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP2) - do_IRQ(AR5312_IRQ_WLAN0_INTRS); - else if (pending & CAUSEF_IP3) - do_IRQ(AR5312_IRQ_ENET0_INTRS); - else if (pending & CAUSEF_IP4) - do_IRQ(AR5312_IRQ_ENET1_INTRS); - else if (pending & CAUSEF_IP5) - do_IRQ(AR5312_IRQ_WLAN1_INTRS); - else if (pending & CAUSEF_IP6) { - unsigned int ar531x_misc_intrs = sysRegRead(AR531X_ISR) & sysRegRead(AR531X_IMR); - - if (ar531x_misc_intrs & AR531X_ISR_TIMER) { - do_IRQ(AR531X_MISC_IRQ_TIMER); - (void)sysRegRead(AR531X_TIMER); - } else if (ar531x_misc_intrs & AR531X_ISR_AHBPROC) - do_IRQ(AR531X_MISC_IRQ_AHB_PROC); - else if ((ar531x_misc_intrs & AR531X_ISR_UART0)) - do_IRQ(AR531X_MISC_IRQ_UART0); - else if (ar531x_misc_intrs & AR531X_ISR_WD) - do_IRQ(AR531X_MISC_IRQ_WATCHDOG); - else - do_IRQ(AR531X_MISC_IRQ_NONE); - } else if (pending & CAUSEF_IP7) { - do_IRQ(AR531X_IRQ_CPU_CLOCK); - } -} - - -/* Enable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5312_misc_intr_enable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR531X_IMR); - imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1)); - sysRegWrite(AR531X_IMR, imr); - sysRegRead(AR531X_IMR); /* flush write buffer */ -} - -/* Disable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5312_misc_intr_disable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR531X_IMR); - imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1)); - sysRegWrite(AR531X_IMR, imr); - sysRegRead(AR531X_IMR); /* flush write buffer */ -} - -/* Turn on the specified AR531X_MISC_IRQ interrupt */ -static unsigned int -ar5312_misc_intr_startup(unsigned int irq) -{ - ar5312_misc_intr_enable(irq); - return 0; -} - -/* Turn off the specified AR531X_MISC_IRQ interrupt */ -static void -ar5312_misc_intr_shutdown(unsigned int irq) -{ - ar5312_misc_intr_disable(irq); -} - -static void -ar5312_misc_intr_ack(unsigned int irq) -{ - ar5312_misc_intr_disable(irq); -} - -static void -ar5312_misc_intr_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5312_misc_intr_enable(irq); -} - -static struct irq_chip ar5312_misc_intr_controller = { - .typename = "AR5312 misc", - .startup = ar5312_misc_intr_startup, - .shutdown = ar5312_misc_intr_shutdown, - .enable = ar5312_misc_intr_enable, - .disable = ar5312_misc_intr_disable, - .ack = ar5312_misc_intr_ack, - .end = ar5312_misc_intr_end, -}; - -static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) -{ - u32 proc1 = sysRegRead(AR531X_PROC1); - u32 procAddr = sysRegRead(AR531X_PROCADDR); /* clears error state */ - u32 dma1 = sysRegRead(AR531X_DMA1); - u32 dmaAddr = sysRegRead(AR531X_DMAADDR); /* clears error state */ - - printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", - procAddr, proc1, dmaAddr, dma1); - - machine_restart("AHB error"); /* Catastrophic failure */ - return IRQ_HANDLED; -} - - -static struct irqaction ar5312_ahb_proc_interrupt = { - .handler = ar5312_ahb_proc_handler, - .flags = IRQF_DISABLED, - .name = "ar5312_ahb_proc_interrupt", -}; - - -static struct irqaction cascade = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "cascade", -}; - -void __init ar5312_misc_intr_init(int irq_base) -{ - int i; - - for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar5312_misc_intr_controller; - } - setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt); - setup_irq(AR5312_IRQ_MISC_INTRS, &cascade); -} - - diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile deleted file mode 100644 index 9b900113ff..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# This file is subject to the terms and conditions of the GNU General Public -# License. See the file "COPYING" in the main directory of this archive -# for more details. -# -# Copyright (C) 2007 FON Technology, SL. -# Copyright (C) 2007 Imre Kaloz -# Copyright (C) 2007 Felix Fietkau -# - -obj-y := board.o irq.o -obj-$(CONFIG_ATHEROS_AR5315_PCI) += pci.o diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c deleted file mode 100644 index 6ee75a966e..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/board.c +++ /dev/null @@ -1,414 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -static int is_5315 = 0; - -static struct resource ar5315_eth_res[] = { - { - .name = "eth0_membase", - .flags = IORESOURCE_MEM, - .start = AR5315_ENET0, - .end = AR5315_ENET0 + 0x2000, - }, - { - .name = "eth0_irq", - .flags = IORESOURCE_IRQ, - .start = AR5315_IRQ_ENET0_INTRS, - .end = AR5315_IRQ_ENET0_INTRS, - }, -}; - -static struct ar531x_eth ar5315_eth_data = { - .phy = 1, - .mac = 0, - .reset_base = AR5315_RESET, - .reset_mac = AR5315_RESET_ENET0, - .reset_phy = AR5315_RESET_EPHY0, - .phy_base = AR5315_ENET0 -}; - -static struct platform_device ar5315_eth = { - .id = 0, - .name = "ar531x-eth", - .dev.platform_data = &ar5315_eth_data, - .resource = ar5315_eth_res, - .num_resources = ARRAY_SIZE(ar5315_eth_res) -}; - -static struct platform_device ar5315_wmac = { - .id = 0, - .name = "ar531x-wmac", - /* FIXME: add resources */ -}; - -static struct resource ar5315_spiflash_res[] = { - { - .name = "flash_base", - .flags = IORESOURCE_MEM, - .start = KSEG1ADDR(AR5315_SPI_READ), - .end = KSEG1ADDR(AR5315_SPI_READ) + 0x800000, - }, - { - .name = "flash_regs", - .flags = IORESOURCE_MEM, - .start = 0x11300000, - .end = 0x11300012, - }, -}; - -static struct platform_device ar5315_spiflash = { - .id = 0, - .name = "spiflash", - .resource = ar5315_spiflash_res, - .num_resources = ARRAY_SIZE(ar5315_spiflash_res) -}; - -#ifdef CONFIG_LEDS_GPIO -static struct gpio_led ar5315_leds[8]; - -static struct gpio_led_platform_data ar5315_led_data = { - .num_leds = ARRAY_SIZE(ar5315_leds), - .leds = (void *) ar5315_leds, -}; - -static struct platform_device ar5315_gpio_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = (void *) &ar5315_led_data, - } -}; -#endif - -static struct platform_device ar5315_wdt = -{ - .id = 0, - .name = "ar2315_wdt", -}; - -static __initdata struct platform_device *ar5315_devs[6]; - -static void *flash_regs; - -static inline __u32 spiflash_regread32(int reg) -{ - volatile __u32 *data = (__u32 *)(flash_regs + reg); - - return (*data); -} - -static inline void spiflash_regwrite32(int reg, __u32 data) -{ - volatile __u32 *addr = (__u32 *)(flash_regs + reg); - - *addr = data; -} - -#define SPI_FLASH_CTL 0x00 -#define SPI_FLASH_OPCODE 0x04 -#define SPI_FLASH_DATA 0x08 - -static __u8 spiflash_probe(void) -{ - __u32 reg; - - do { - reg = spiflash_regread32(SPI_FLASH_CTL); - } while (reg & SPI_CTL_BUSY); - - spiflash_regwrite32(SPI_FLASH_OPCODE, 0xab); - - reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | 4 | - (1 << 4) | SPI_CTL_START; - - spiflash_regwrite32(SPI_FLASH_CTL, reg); - - do { - reg = spiflash_regread32(SPI_FLASH_CTL); - } while (reg & SPI_CTL_BUSY); - - reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); - reg &= 0xff; - - return (u8) reg; -} - - -#define STM_8MBIT_SIGNATURE 0x13 -#define STM_16MBIT_SIGNATURE 0x14 -#define STM_32MBIT_SIGNATURE 0x15 -#define STM_64MBIT_SIGNATURE 0x16 -#define STM_128MBIT_SIGNATURE 0x17 - - -static char __init *ar5315_flash_limit(void) -{ - u8 sig; - u32 flash_size = 0; - - /* probe the flash chip size */ - flash_regs = ioremap_nocache(ar5315_spiflash_res[1].start, ar5315_spiflash_res[1].end - ar5315_spiflash_res[1].start); - sig = spiflash_probe(); - iounmap(flash_regs); - - switch(sig) { - case STM_8MBIT_SIGNATURE: - flash_size = 0x00100000; - break; - case STM_16MBIT_SIGNATURE: - flash_size = 0x00200000; - break; - case STM_32MBIT_SIGNATURE: - flash_size = 0x00400000; - break; - case STM_64MBIT_SIGNATURE: - flash_size = 0x00800000; - break; - case STM_128MBIT_SIGNATURE: - flash_size = 0x01000000; - break; - } - - ar5315_spiflash_res[0].end = ar5315_spiflash_res[0].start + flash_size; - return (char *) ar5315_spiflash_res[0].end; -} - -int __init ar5315_init_devices(void) -{ - struct ar531x_config *config; - struct ar531x_boarddata *bcfg; - int dev = 0; -#ifdef CONFIG_LEDS_GPIO - int i; - char *tmp; -#endif - - if (!is_5315) - return 0; - - /* Find board configuration */ - ar531x_find_config(ar5315_flash_limit()); - bcfg = (struct ar531x_boarddata *) board_config; - - config = (struct ar531x_config *) kzalloc(sizeof(struct ar531x_config), GFP_KERNEL); - config->board = board_config; - config->radio = radio_config; - config->unit = 0; - config->tag = (u_int16_t) (sysRegRead(AR5315_SREV) & AR5315_REV_CHIP); - - ar5315_eth_data.board_config = board_config; - ar5315_eth_data.macaddr = bcfg->enet0Mac; - ar5315_wmac.dev.platform_data = config; - - ar5315_devs[dev++] = &ar5315_eth; - ar5315_devs[dev++] = &ar5315_wmac; - ar5315_devs[dev++] = &ar5315_spiflash; - ar5315_devs[dev++] = &ar5315_wdt; - -#ifdef CONFIG_LEDS_GPIO - ar5315_led_data.num_leds = 0; - for(i = 1; i < 8; i++) - { - if((i != AR5315_RESET_GPIO) && (i != bcfg->resetConfigGpio)) - { - if(i == bcfg->sysLedGpio) - { - tmp = kstrdup("wlan", GFP_KERNEL); - } else { - tmp = kmalloc(6, GFP_KERNEL); - if(tmp) - sprintf((char*)tmp, "gpio%d", i); - } - if(tmp) - { - ar5315_leds[ar5315_led_data.num_leds].name = tmp; - ar5315_leds[ar5315_led_data.num_leds].gpio = i; - ar5315_leds[ar5315_led_data.num_leds].active_low = 0; - ar5315_led_data.num_leds++; - } else { - printk("failed to alloc led string\n"); - continue; - } - } - } - ar5315_devs[dev++] = &ar5315_gpio_leds; -#endif - - return platform_add_devices(ar5315_devs, dev); -} - -static void ar5315_halt(void) -{ - while (1); -} - -static void ar5315_power_off(void) -{ - ar5315_halt(); -} - - -static void ar5315_restart(char *command) -{ - void (*mips_reset_vec)(void) = (void *) 0xbfc00000; - - /* reset the system */ - sysRegWrite(AR5315_COLD_RESET,AR5317_RESET_SYSTEM); - - /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. - * give it some time to attempt a gpio based hardware reset - * (atheros reference design workaround) */ - gpio_direction_output(AR5315_RESET_GPIO, 0); - mdelay(100); - - /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic - * workaround. Attempt to jump to the mips reset location - - * the boot loader itself might be able to recover the system */ - mips_reset_vec(); -} - - -/* - * This table is indexed by bits 5..4 of the CLOCKCTL1 register - * to determine the predevisor value. - */ -static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { - 1, - 2, - 4, - 5 -}; - -static int __initdata PLLC_DIVIDE_TABLE[5] = { - 2, - 3, - 4, - 6, - 3 -}; - -static unsigned int __init -ar5315_sys_clk(unsigned int clockCtl) -{ - unsigned int pllcCtrl,cpuDiv; - unsigned int pllcOut,refdiv,fdiv,divby2; - unsigned int clkDiv; - - pllcCtrl = sysRegRead(AR5315_PLLC_CTL); - refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; - refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; - fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; - divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; - divby2 += 1; - pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; - - - /* clkm input selected */ - switch(clockCtl & CPUCLK_CLK_SEL_M) { - case 0: - case 1: - clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; - break; - case 2: - clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; - break; - default: - pllcOut = 40000000; - clkDiv = 1; - break; - } - cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; - cpuDiv = cpuDiv * 2 ?: 1; - return (pllcOut/(clkDiv * cpuDiv)); -} - -static inline unsigned int ar5315_cpu_frequency(void) -{ - return ar5315_sys_clk(sysRegRead(AR5315_CPUCLK)); -} - -static inline unsigned int ar5315_apb_frequency(void) -{ - return ar5315_sys_clk(sysRegRead(AR5315_AMBACLK)); -} - -static void __init ar5315_time_init(void) -{ - mips_hpt_frequency = ar5315_cpu_frequency() / 2; -} - -void __init ar5315_prom_init(void) -{ - u32 memsize, memcfg, devid; - - is_5315 = 1; - memcfg = sysRegRead(AR5315_MEM_CFG); - memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S); - memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S); - memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S); - memsize <<= 3; - add_memory_region(0, memsize, BOOT_MEM_RAM); - - /* Detect the hardware based on the device ID */ - devid = sysRegRead(AR5315_SREV) & AR5315_REV_CHIP; - switch(devid) { - case 0x90: - case 0x91: - mips_machtype = MACH_ATHEROS_AR2317; - break; - default: - mips_machtype = MACH_ATHEROS_AR2315; - break; - } -} - -void __init ar5315_plat_setup(void) -{ - unsigned int config = read_c0_config(); - - /* Clear any lingering AHB errors */ - write_c0_config(config & ~0x3); - sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); - sysRegRead(AR5315_AHB_ERR1); - sysRegWrite(AR5315_WDC, WDC_IGNORE_EXPIRATION); - - board_time_init = ar5315_time_init; - - _machine_restart = ar5315_restart; - _machine_halt = ar5315_halt; - pm_power_off = ar5315_power_off; - - serial_setup(KSEG1ADDR(AR5315_UART0), ar5315_apb_frequency()); -} - -arch_initcall(ar5315_init_devices); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c deleted file mode 100644 index 581b1a4a10..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/irq.c +++ /dev/null @@ -1,359 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -static u32 gpiointmask = 0, gpiointval = 0; - -static inline void ar5315_gpio_irq(void) -{ - u32 pend; - sysRegWrite(AR5315_ISR, sysRegRead(AR5315_IMR) | ~AR5315_ISR_GPIO); - - /* only do one gpio interrupt at a time */ - pend = (sysRegRead(AR5315_GPIO_DI) ^ gpiointval) & gpiointmask; - if (!pend) - return; - - do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1); -} - - -/* - * Called when an interrupt is received, this function - * determines exactly which interrupt it was, and it - * invokes the appropriate handler. - * - * Implicitly, we also define interrupt priority by - * choosing which to dispatch first. - */ -asmlinkage void ar5315_irq_dispatch(void) -{ - int pending = read_c0_status() & read_c0_cause(); - - if (pending & CAUSEF_IP3) - do_IRQ(AR5315_IRQ_WLAN0_INTRS); - else if (pending & CAUSEF_IP4) - do_IRQ(AR5315_IRQ_ENET0_INTRS); -#ifdef CONFIG_PCI - else if (pending & CAUSEF_IP5) - ar5315_pci_irq(AR5315_IRQ_LCBUS_PCI); -#endif - else if (pending & CAUSEF_IP2) { - unsigned int ar531x_misc_intrs = sysRegRead(AR5315_ISR) & sysRegRead(AR5315_IMR); - - if (ar531x_misc_intrs & AR5315_ISR_SPI) - do_IRQ(AR531X_MISC_IRQ_SPI); - else if (ar531x_misc_intrs & AR5315_ISR_TIMER) - do_IRQ(AR531X_MISC_IRQ_TIMER); - else if (ar531x_misc_intrs & AR5315_ISR_AHB) - do_IRQ(AR531X_MISC_IRQ_AHB_PROC); - else if (ar531x_misc_intrs & AR5315_ISR_GPIO) - ar5315_gpio_irq(); - else if (ar531x_misc_intrs & AR5315_ISR_UART0) - do_IRQ(AR531X_MISC_IRQ_UART0); - else if (ar531x_misc_intrs & AR5315_ISR_WD) - do_IRQ(AR531X_MISC_IRQ_WATCHDOG); - else - do_IRQ(AR531X_MISC_IRQ_NONE); - } else if (pending & CAUSEF_IP7) - do_IRQ(AR531X_IRQ_CPU_CLOCK); -} - -#ifdef CONFIG_PCI -static inline void pci_abort_irq(void) -{ - sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_ABORT_INT); - (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */ -} - -static inline void pci_ack_irq(void) -{ - sysRegWrite(AR5315_PCI_INT_STATUS, AR5315_PCI_EXT_INT); - (void)sysRegRead(AR5315_PCI_INT_STATUS); /* flush write to hardware */ -} - -void ar5315_pci_irq(int irq) -{ - if (sysRegRead(AR5315_PCI_INT_STATUS) == AR5315_PCI_ABORT_INT) - pci_abort_irq(); - else { - do_IRQ(irq); - pci_ack_irq(); - } -} -#endif - -static void ar5315_gpio_intr_enable(unsigned int irq) -{ - u32 gpio, mask; - gpio = irq - AR531X_GPIO_IRQ_BASE; - mask = 1 << gpio; - gpiointmask |= mask; - - /* reconfigure GPIO line as input */ - sysRegMask(AR5315_GPIO_CR, AR5315_GPIO_CR_M(gpio), AR5315_GPIO_CR_I(gpio)); - - /* Enable interrupt with edge detection */ - sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(3)); -} - -static void ar5315_gpio_intr_disable(unsigned int irq) -{ - u32 gpio, mask; - gpio = irq - AR531X_GPIO_IRQ_BASE; - mask = 1 << gpio; - - gpiointmask &= ~mask; - - /* Disable interrupt with edge detection */ - sysRegMask(AR5315_GPIO_INT, AR5315_GPIO_INT_M | AR5315_GPIO_INT_LVL_M, gpio | AR5315_GPIO_INT_LVL(0)); -} - -/* Turn on the specified AR531X_MISC_IRQ interrupt */ -static unsigned int ar5315_gpio_intr_startup(unsigned int irq) -{ - ar5315_gpio_intr_enable(irq); - return 0; -} - -/* Turn off the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_gpio_intr_shutdown(unsigned int irq) -{ - ar5315_gpio_intr_disable(irq); -} - -static void -ar5315_gpio_intr_ack(unsigned int irq) -{ - ar5315_gpio_intr_disable(irq); -} - -static void -ar5315_gpio_intr_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5315_gpio_intr_enable(irq); -} - -static struct irq_chip ar5315_gpio_intr_controller = { - .typename = "AR5315 GPIO", - .startup = ar5315_gpio_intr_startup, - .shutdown = ar5315_gpio_intr_shutdown, - .enable = ar5315_gpio_intr_enable, - .disable = ar5315_gpio_intr_disable, - .ack = ar5315_gpio_intr_ack, - .end = ar5315_gpio_intr_end, -}; - - -/* Enable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_misc_intr_enable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR5315_IMR); - switch(irq) - { - case AR531X_MISC_IRQ_SPI: - imr |= AR5315_ISR_SPI; - break; - - case AR531X_MISC_IRQ_TIMER: - imr |= AR5315_ISR_TIMER; - break; - - case AR531X_MISC_IRQ_AHB_PROC: - imr |= AR5315_ISR_AHB; - break; - - case AR531X_MISC_IRQ_AHB_DMA: - imr |= 0/* ?? */; - break; - - case AR531X_MISC_IRQ_GPIO: - imr |= AR5315_ISR_GPIO; - break; - - case AR531X_MISC_IRQ_UART0: - imr |= AR5315_ISR_UART0; - break; - - - case AR531X_MISC_IRQ_WATCHDOG: - imr |= AR5315_ISR_WD; - break; - - case AR531X_MISC_IRQ_LOCAL: - imr |= 0/* ?? */; - break; - - } - sysRegWrite(AR5315_IMR, imr); - imr=sysRegRead(AR5315_IMR); /* flush write buffer */ -} - -/* Disable the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_misc_intr_disable(unsigned int irq) -{ - unsigned int imr; - - imr = sysRegRead(AR5315_IMR); - switch(irq) - { - case AR531X_MISC_IRQ_SPI: - imr &= ~AR5315_ISR_SPI; - break; - - case AR531X_MISC_IRQ_TIMER: - imr &= (~AR5315_ISR_TIMER); - break; - - case AR531X_MISC_IRQ_AHB_PROC: - imr &= (~AR5315_ISR_AHB); - break; - - case AR531X_MISC_IRQ_AHB_DMA: - imr &= 0/* ?? */; - break; - - case AR531X_MISC_IRQ_GPIO: - imr &= ~AR5315_ISR_GPIO; - break; - - case AR531X_MISC_IRQ_UART0: - imr &= (~AR5315_ISR_UART0); - break; - - case AR531X_MISC_IRQ_WATCHDOG: - imr &= (~AR5315_ISR_WD); - break; - - case AR531X_MISC_IRQ_LOCAL: - imr &= ~0/* ?? */; - break; - - } - sysRegWrite(AR5315_IMR, imr); - sysRegRead(AR5315_IMR); /* flush write buffer */ -} - -/* Turn on the specified AR531X_MISC_IRQ interrupt */ -static unsigned int -ar5315_misc_intr_startup(unsigned int irq) -{ - ar5315_misc_intr_enable(irq); - return 0; -} - -/* Turn off the specified AR531X_MISC_IRQ interrupt */ -static void -ar5315_misc_intr_shutdown(unsigned int irq) -{ - ar5315_misc_intr_disable(irq); -} - -static void -ar5315_misc_intr_ack(unsigned int irq) -{ - ar5315_misc_intr_disable(irq); -} - -static void -ar5315_misc_intr_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - ar5315_misc_intr_enable(irq); -} - -static struct irq_chip ar5315_misc_intr_controller = { - .typename = "AR5315 misc", - .startup = ar5315_misc_intr_startup, - .shutdown = ar5315_misc_intr_shutdown, - .enable = ar5315_misc_intr_enable, - .disable = ar5315_misc_intr_disable, - .ack = ar5315_misc_intr_ack, - .end = ar5315_misc_intr_end, -}; - -static irqreturn_t ar5315_ahb_proc_handler(int cpl, void *dev_id) -{ - sysRegWrite(AR5315_AHB_ERR0,AHB_ERROR_DET); - sysRegRead(AR5315_AHB_ERR1); - - printk("AHB fatal error\n"); - machine_restart("AHB error"); /* Catastrophic failure */ - - return IRQ_HANDLED; -} - -static struct irqaction ar5315_ahb_proc_interrupt = { - .handler = ar5315_ahb_proc_handler, - .flags = IRQF_DISABLED, - .name = "ar5315_ahb_proc_interrupt", -}; - - -static struct irqaction cascade = { - .handler = no_action, - .flags = IRQF_DISABLED, - .name = "cascade", -}; - -static void ar5315_gpio_intr_init(int irq_base) -{ - int i; - - for (i = irq_base; i < irq_base + AR531X_GPIO_IRQ_COUNT; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar5315_gpio_intr_controller; - } - setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); - gpiointval = sysRegRead(AR5315_GPIO_DI); -} - -void ar5315_misc_intr_init(int irq_base) -{ - int i; - - for (i = irq_base; i < irq_base + AR531X_MISC_IRQ_COUNT; i++) { - irq_desc[i].status = IRQ_DISABLED; - irq_desc[i].action = NULL; - irq_desc[i].depth = 1; - irq_desc[i].chip = &ar5315_misc_intr_controller; - } - setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5315_ahb_proc_interrupt); - setup_irq(AR5315_IRQ_MISC_INTRS, &cascade); - ar5315_gpio_intr_init(AR531X_GPIO_IRQ_BASE); -} - diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c deleted file mode 100644 index 166fa1cf97..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/ar5315/pci.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "ar531x.h" - -#define AR531X_MEM_BASE 0x80800000UL -#define AR531X_MEM_SIZE 0x00ffffffUL -#define AR531X_IO_SIZE 0x00007fffUL -#define IDSEL_SHIFT 13 - -static spinlock_t ar531x_pci_lock = SPIN_LOCK_UNLOCKED; -static u32 cfgaddr; - -static int config_access(int busno, int dev, int func, int where, int size, u32 ptr, int write) -{ - u32 address; /* Address to read from */ - u32 reg; - unsigned long flags; - int ret = -1; - if ((busno != 0) || ((dev != 0) && (dev != 3)) || (func > 2)) - return ret; - - spin_lock_irqsave(&ar531x_pci_lock, flags); - - /* Select Configuration access */ - reg = sysRegRead(AR5315_PCI_MISC_CONFIG); - reg |= AR5315_PCIMISC_CFG_SEL; - sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); - (void)sysRegRead(AR5315_PCI_MISC_CONFIG); - - address = (u32)cfgaddr + (1 << (IDSEL_SHIFT + dev)) + (func << 8) + where; - - if (size == 1) - address ^= 0x3; - else if (size == 2) - address ^= 0x2; - - if (write) { - if (size == 1) - ret = put_dbe(ptr, (u8 *) address); - else if (size == 2) - ret = put_dbe(ptr, (u16 *) address); - else if (size == 4) - ret = put_dbe(ptr, (u32 *) address); - } else { - if (size == 1) - ret = get_dbe(*((u32 *)ptr), (u8 *) address); - else if (size == 2) - ret = get_dbe(*((u32 *)ptr), (u16 *) address); - else if (size == 4) - ret = get_dbe(*((u32 *)ptr), (u32 *) address); - } - - /* Select Memory access */ - reg = sysRegRead(AR5315_PCI_MISC_CONFIG); - reg &= ~AR5315_PCIMISC_CFG_SEL; - sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); - (void)sysRegRead(AR5315_PCI_MISC_CONFIG); - - spin_unlock_irqrestore(&ar531x_pci_lock, flags); - - if (ret) { - *((u32 *)ptr) = 0xffffffff; - return PCIBIOS_DEVICE_NOT_FOUND; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int ar531x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value) -{ - return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, (u32) value, 0); -} - -static int ar531x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) -{ - return config_access(bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), where, size, value, 1); -} - -struct pci_ops ar531x_pci_ops = { - .read = ar531x_pci_read, - .write = ar531x_pci_write, -}; - -static struct resource ar531x_mem_resource = { - .name = "AR531x PCI MEM", - .start = AR531X_MEM_BASE, - .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000, - .flags = IORESOURCE_MEM, -}; - -static struct resource ar531x_io_resource = { - .name = "AR531x PCI I/O", - .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE, - .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1, - .flags = IORESOURCE_IO, -}; - -struct pci_controller ar531x_pci_controller = { - .pci_ops = &ar531x_pci_ops, - .mem_resource = &ar531x_mem_resource, - .io_resource = &ar531x_io_resource, - .mem_offset = 0x00000000UL, - .io_offset = 0x00000000UL, -}; - -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return AR5315_IRQ_LCBUS_PCI; -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - u32 reg; - - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5); - pci_write_config_word(dev, 0x40, 0); - - /* Clear any pending Abort or external Interrupts - * and enable interrupt processing */ - reg = sysRegRead(AR5315_PCI_INTEN_REG); - reg &= ~AR5315_PCI_INT_ENABLE; - sysRegWrite(AR5315_PCI_INTEN_REG, reg); - - reg = sysRegRead(AR5315_PCI_INT_STATUS); - reg |= (AR5315_PCI_ABORT_INT | AR5315_PCI_EXT_INT); - sysRegWrite(AR5315_PCI_INT_STATUS, reg); - - reg = sysRegRead(AR5315_PCI_INT_MASK); - reg |= (AR5315_PCI_EXT_INT | AR5315_PCI_ABORT_INT); - sysRegWrite(AR5315_PCI_INT_MASK, reg); - - reg = sysRegRead(AR5315_PCI_INTEN_REG); - reg |= AR5315_PCI_INT_ENABLE; - sysRegWrite(AR5315_PCI_INTEN_REG, reg); - - return 0; -} - -static void ar5315_pci_fixup(struct pci_dev *dev) -{ - struct pci_bus *bus = dev->bus; - - if ((PCI_SLOT(dev->devfn) != 3) || (PCI_FUNC(dev->devfn) != 0) || (bus->number != 0)) - return; - -#define _DEV bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn) - printk("PCI: fixing up device %d,%d,%d\n", _DEV); - /* fix up mbars */ - config_access(_DEV, PCI_BASE_ADDRESS_0, 4, HOST_PCI_MBAR0, 1); - config_access(_DEV, PCI_BASE_ADDRESS_1, 4, HOST_PCI_MBAR1, 1); - config_access(_DEV, PCI_BASE_ADDRESS_2, 4, HOST_PCI_MBAR2, 1); - config_access(_DEV, PCI_COMMAND, 4, - PCI_COMMAND_MEMORY|PCI_COMMAND_MASTER|PCI_COMMAND_SPECIAL| - PCI_COMMAND_INVALIDATE|PCI_COMMAND_PARITY|PCI_COMMAND_SERR| - PCI_COMMAND_FAST_BACK, 1); -#undef _DEV -} -DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar5315_pci_fixup); - -int __init ar5315_pci_init(void) -{ - u32 reg; - - if (mips_machtype != MACH_ATHEROS_AR2315) - return -ENODEV; - - printk("AR531x PCI init... \n"); - - cfgaddr = (u32) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */ - ar531x_pci_controller.io_map_base = - (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE); - set_io_port_base(ar531x_pci_controller.io_map_base); /* PCI I/O space */ - - reg = sysRegRead(AR5315_RESET); - sysRegWrite(AR5315_RESET, reg | AR5315_RESET_PCIDMA); - - udelay(10*1000); - - sysRegWrite(AR5315_RESET, reg & ~AR5315_RESET_PCIDMA); - sysRegRead(AR5315_RESET); /* read after */ - - udelay(10*1000); - - reg = sysRegRead(AR5315_ENDIAN_CTL); - reg |= AR5315_CONFIG_PCIAHB | AR5315_CONFIG_PCIAHB_BRIDGE; - - sysRegWrite(AR5315_ENDIAN_CTL, reg); - - reg = sysRegRead(AR5315_PCICLK); - reg = 4; - sysRegWrite(AR5315_PCICLK, reg); - - reg = sysRegRead(AR5315_AHB_ARB_CTL); - reg |= (ARB_PCI); - sysRegWrite(AR5315_AHB_ARB_CTL, reg); - - reg = sysRegRead(AR5315_IF_CTL); - reg &= ~(IF_PCI_CLK_MASK | IF_MASK); - reg |= (IF_PCI | IF_PCI_HOST | IF_PCI_INTR | (IF_PCI_CLK_OUTPUT_CLK << IF_PCI_CLK_SHIFT)); - - sysRegWrite(AR5315_IF_CTL, reg); - - /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */ - reg = sysRegRead(AR5315_PCI_MISC_CONFIG); - reg &= ~(AR5315_PCIMISC_RST_MODE); - reg |= AR5315_PCIRST_LOW; - sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); - - /* wait for 100 ms */ - udelay(100*1000); - - /* Bring the PCI out of reset */ - reg = sysRegRead(AR5315_PCI_MISC_CONFIG); - reg &= ~(AR5315_PCIMISC_RST_MODE); - reg |= (AR5315_PCIRST_HIGH | AR5315_PCICACHE_DIS | 0x8); - sysRegWrite(AR5315_PCI_MISC_CONFIG, reg); - - sysRegWrite(AR5315_PCI_UNCACHE_CFG, - 0x1E | /* 1GB uncached */ - (1 << 5) | /* Enable uncached */ - (0x2 << 30) /* Base: 0x80000000 */ - ); - (void)sysRegRead(AR5315_PCI_UNCACHE_CFG); /* flush */ - - udelay(500*1000); - - /* dirty hack - anyone with a datasheet that knows the memory map ? */ - ioport_resource.start = 0x10000000; - ioport_resource.end = 0xffffffff; - iomem_resource.start = 0x10000000; - iomem_resource.end = 0xffffffff; - - register_pci_controller(&ar531x_pci_controller); - - printk("done\n"); - return 0; -} - -arch_initcall(ar5315_pci_init); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c deleted file mode 100644 index 4a224933ae..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/board.c +++ /dev/null @@ -1,299 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -/* - * Platform devices for Atheros SoCs - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -char *board_config = NULL; -char *radio_config = NULL; -int broken_boarddata = 0; - -extern int early_serial_setup(struct uart_port *port); - -static inline bool -check_radio_magic(unsigned char *addr) -{ - addr += 0x7a; /* offset for flash magic */ - if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) { - return 1; - } - return 0; -} - -static inline bool -check_board_data(unsigned char *flash_limit, unsigned char *addr, bool broken) -{ - /* config magic found */ - if ( *(int *)addr == 0x35333131) - return 1; - - if (!broken) - return 0; - - if (check_radio_magic(addr + 0xf8)) - radio_config = addr + 0xf8; - if ((addr < flash_limit + 0x10000) && - check_radio_magic(addr + 0x10000)) - radio_config = addr + 0x10000; - - if (radio_config) { - /* broken board data detected, use radio data to find the offset, - * user will fix this */ - broken_boarddata = 1; - return 1; - } - return 0; -} - -static u8 *find_board_config(char *flash_limit, bool broken) -{ - char *addr; - int found = 0; - - for (addr = (char *) (flash_limit - 0x1000); - addr >= (char *) (flash_limit - 0x30000); - addr -= 0x1000) { - - if (check_board_data(flash_limit, addr, broken)) { - found = 1; - break; - } - } - - if (!found) - addr = NULL; - - return addr; -} - -static u8 *find_radio_config(char *flash_limit, char *board_config) -{ - int dataFound; - char *radio_config; - - /* - * Now find the start of Radio Configuration data, using heuristics: - * Search forward from Board Configuration data by 0x1000 bytes - * at a time until we find non-0xffffffff. - */ - dataFound = 0; - for (radio_config = board_config + 0x1000; - (radio_config < flash_limit); - radio_config += 0x1000) { - if ((*(u32 *)radio_config != 0xffffffff) && - check_radio_magic(radio_config)) { - dataFound = 1; - break; - } - } - -#ifdef CONFIG_ATHEROS_AR5315 - if (!dataFound) { /* AR2316 relocates radio config to new location */ - for (radio_config = board_config + 0xf8; - (radio_config < flash_limit - 0x1000 + 0xf8); - radio_config += 0x1000) { - if ((*(u32 *)radio_config != 0xffffffff) && - check_radio_magic(radio_config)) { - dataFound = 1; - break; - } - } - } -#endif - - if (!dataFound) { - printk("Could not find Radio Configuration data\n"); - radio_config = 0; - } - - return (u8 *) radio_config; -} - -int __init ar531x_find_config(char *flash_limit) -{ - struct ar531x_boarddata *bd; - unsigned int rcfg_size; - char *bcfg, *rcfg; - - /* Copy the board and radio data to RAM, because with the new - * spiflash driver, accessing the mapped memory directly is no - * longer safe */ - - bcfg = find_board_config(flash_limit, false); - if (!bcfg) - bcfg = find_board_config(flash_limit, true); - if (!bcfg) { - printk("WARNING: No board configuration data found!\n"); - return -ENODEV; - } - - board_config = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); - memcpy(board_config, bcfg, 0x100); - if (broken_boarddata) { - printk("WARNING: broken board data detected\n"); - bd = (struct ar531x_boarddata *)board_config; - if (!memcmp(bd->enet0Mac, "\x00\x00\x00\x00\x00\x00", 6)) { - printk("Fixing up empty mac addresses\n"); - bd->enet0Mac[1] = 0x13; - bd->enet0Mac[2] = 0x37; - get_random_bytes(bd->enet0Mac + 3, 3); - bd->wlan0Mac[1] = 0x13; - bd->wlan0Mac[2] = 0x37; - get_random_bytes(bd->wlan0Mac + 3, 3); - } - } - - - /* Radio config starts 0x100 bytes after board config, regardless - * of what the physical layout on the flash chip looks like */ - - if (radio_config) - rcfg = radio_config; - else - rcfg = find_radio_config(flash_limit, bcfg); - - if (!rcfg) - return -ENODEV; - - radio_config = board_config + 0x100 + ((rcfg - bcfg) & 0xfff); - printk("Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, radio_config - board_config); - rcfg_size = BOARD_CONFIG_BUFSZ - (radio_config - board_config); - memcpy(radio_config, rcfg, rcfg_size); - - return 0; -} - -void __init serial_setup(unsigned long mapbase, unsigned int uartclk) -{ - struct uart_port s; - - memset(&s, 0, sizeof(s)); - - s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - s.iotype = UPIO_MEM; - s.irq = AR531X_MISC_IRQ_UART0; - s.regshift = 2; - s.mapbase = mapbase; - s.uartclk = uartclk; - s.membase = (void __iomem *)s.mapbase; - - early_serial_setup(&s); -} - -void __init plat_mem_setup(void) -{ - DO_AR5312(ar5312_plat_setup();) - DO_AR5315(ar5315_plat_setup();) - - /* Disable data watchpoints */ - write_c0_watchlo0(0); -} - -const char *get_system_type(void) -{ - switch (mips_machtype) { -#ifdef CONFIG_ATHEROS_AR5312 - case MACH_ATHEROS_AR5312: - return "Atheros AR5312"; - - case MACH_ATHEROS_AR2312: - return "Atheros AR2312"; - - case MACH_ATHEROS_AR2313: - return "Atheros AR2313"; -#endif -#ifdef CONFIG_ATHEROS_AR5315 - case MACH_ATHEROS_AR2315: - return "Atheros AR2315"; - case MACH_ATHEROS_AR2316: - return "Atheros AR2316"; - case MACH_ATHEROS_AR2317: - return "Atheros AR2317"; - case MACH_ATHEROS_AR2318: - return "Atheros AR2318"; -#endif - } - return "Atheros (unknown)"; -} - -#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) -void __init plat_timer_setup(struct irqaction *irq) -{ - unsigned int count; - - /* Usually irq is timer_irqaction (timer_interrupt) */ - setup_irq(AR531X_IRQ_CPU_CLOCK, irq); - - /* to generate the first CPU timer interrupt */ - count = read_c0_count(); - write_c0_compare(count + 1000); -} -#endif - -asmlinkage void plat_irq_dispatch(void) -{ - DO_AR5312(ar5312_irq_dispatch();) - DO_AR5315(ar5315_irq_dispatch();) -} - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) -void (*board_time_init)(void); -void __init plat_time_init(void) { - board_time_init(); -} -#endif - -void __init arch_init_irq(void) -{ - clear_c0_status(ST0_IM); - mips_cpu_irq_init(); - - /* Initialize interrupt controllers */ - DO_AR5312(ar5312_misc_intr_init(AR531X_MISC_IRQ_BASE);) - DO_AR5315(ar5315_misc_intr_init(AR531X_MISC_IRQ_BASE);) -} - -static int __init ar531x_register_gpiodev(void) -{ - static struct resource res = { - .start = 0xFFFFFFFF, - }; - struct platform_device *pdev; - - printk(KERN_INFO "ar531x: Registering GPIODEV device\n"); - - pdev = platform_device_register_simple("GPIODEV", 0, &res, 1); - - if (!pdev) { - printk(KERN_ERR "ar531x: GPIODEV init failed\n"); - return -ENODEV; - } - - return 0; -} - -device_initcall(ar531x_register_gpiodev); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c deleted file mode 100644 index 82617cdd3c..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/prom.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright MontaVista Software Inc - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -/* - * Prom setup file for ar531x - */ - -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -void __init prom_init(void) -{ - char **argv; - - mips_machtype = -1; - - DO_AR5312(ar5312_prom_init();) - DO_AR5315(ar5315_prom_init();) -#if 0 - argv = (char **)fw_arg1; - /* RedBoot desired command line is argv[1] */ - strcat(arcs_cmdline, argv[1]); -#endif -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c b/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c deleted file mode 100644 index eb525da207..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/atheros/reset.c +++ /dev/null @@ -1,162 +0,0 @@ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(bcfg->resetConfigGpio)) - -struct event_t { - struct work_struct wq; - int set; - unsigned long jiffies; -}; - -static struct ar531x_boarddata *bcfg; -static struct timer_list rst_button_timer; - -extern struct sock *uevent_sock; -extern u64 uevent_next_seqnum(void); -static unsigned long seen; - -static inline void add_msg(struct sk_buff *skb, char *msg) -{ - char *scratch; - scratch = skb_put(skb, strlen(msg) + 1); - sprintf(scratch, msg); -} - -static void hotplug_button(struct work_struct *wq) -{ - struct sk_buff *skb; - struct event_t *event; - size_t len; - char *scratch, *s; - char buf[128]; - - event = container_of(wq, struct event_t, wq); - if (!uevent_sock) - goto done; - - /* allocate message with the maximum possible size */ - s = event->set ? "pressed" : "released"; - len = strlen(s) + 2; - skb = alloc_skb(len + 2048, GFP_KERNEL); - if (!skb) - goto done; - - /* add header */ - scratch = skb_put(skb, len); - sprintf(scratch, "%s@",s); - - /* copy keys to our continuous event payload buffer */ - add_msg(skb, "HOME=/"); - add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin"); - add_msg(skb, "SUBSYSTEM=button"); - add_msg(skb, "BUTTON=reset"); - add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released")); - sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ); - add_msg(skb, buf); - snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); - add_msg(skb, buf); - - NETLINK_CB(skb).dst_group = 1; - netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL); - -done: - kfree(event); -} - -static int no_release_workaround = 1; - -static void -reset_button_poll(unsigned long unused) -{ - struct event_t *event; - int gpio = ~0; - - if(!no_release_workaround) - return; - - DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);) - gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE); - if(gpio) - { - rst_button_timer.expires = jiffies + (HZ / 4); - add_timer(&rst_button_timer); - } else { - event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); - if (!event) - { - printk("Could not alloc hotplug event\n"); - return; - } - event->set = 0; - event->jiffies = jiffies; - INIT_WORK(&event->wq, (void *)(void *)hotplug_button); - schedule_work(&event->wq); - } -} - -static irqreturn_t button_handler(int irq, void *dev_id) -{ - static int pressed = 0; - struct event_t *event; - u32 gpio = ~0; - - event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); - if (!event) - return IRQ_NONE; - - pressed = !pressed; - - DO_AR5315(gpio = sysRegRead(AR5315_GPIO_DI);) - gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE); - - event->set = gpio; - if(!event->set) - no_release_workaround = 0; - - event->jiffies = jiffies; - - INIT_WORK(&event->wq, (void *)(void *)hotplug_button); - schedule_work(&event->wq); - - seen = jiffies; - if(event->set && no_release_workaround) - mod_timer(&rst_button_timer, jiffies + (HZ / 4)); - - return IRQ_HANDLED; -} - -void ar531x_disable_reset_button(void) -{ - disable_irq(AR531X_RESET_GPIO_IRQ); -} - -EXPORT_SYMBOL(ar531x_disable_reset_button); - -int __init ar531x_init_reset(void) -{ - bcfg = (struct ar531x_boarddata *) board_config; - - seen = jiffies; - - init_timer(&rst_button_timer); - rst_button_timer.function = reset_button_poll; - rst_button_timer.expires = jiffies + HZ / 50; - add_timer(&rst_button_timer); - - request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar531x_reset", NULL); - - return 0; -} - - - -module_init(ar531x_init_reset); diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h deleted file mode 100644 index afa3aefdad..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5312/ar5312.h +++ /dev/null @@ -1,234 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -#ifndef AR5312_H -#define AR5312_H - -#include - -/* - * IRQs - */ - -#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ - - -/* Address Map */ -#define AR531X_WLAN0 0x18000000 -#define AR531X_WLAN1 0x18500000 -#define AR531X_ENET0 0x18100000 -#define AR531X_ENET1 0x18200000 -#define AR531X_SDRAMCTL 0x18300000 -#define AR531X_FLASHCTL 0x18400000 -#define AR531X_APBBASE 0x1c000000 -#define AR531X_FLASH 0x1e000000 -#define AR531X_UART0 0xbc000003 /* UART MMR */ - -/* - * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that - * should be considered available. The AR5312 supports 2 enet MACS, - * even though many reference boards only actually use 1 of them - * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. - * The AR2312 supports 1 enet MAC. - */ -#define AR531X_NUM_ENET_MAC 2 - -/* - * Need these defines to determine true number of ethernet MACs - */ -#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ -#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ -#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ -#define AR531X_RADIO_MASK_OFF 0xc8 -#define AR531X_RADIO0_MASK 0x0003 -#define AR531X_RADIO1_MASK 0x000c -#define AR531X_RADIO1_S 2 - -/* - * AR531X_NUM_WMAC defines the number of Wireless MACs that\ - * should be considered available. - */ -#define AR531X_NUM_WMAC 2 - -/* Reset/Timer Block Address Map */ -#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) -#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ -#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ -#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ -#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ -#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ -#define AR531X_RESET (AR531X_RESETTMR + 0x0020) -#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) -#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) -#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) -#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) -#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) -#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) -#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ -#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ - -/* AR531X_WD_CTRL register bit field definitions */ -#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 -#define AR531X_WD_CTRL_NMI 0x0001 -#define AR531X_WD_CTRL_RESET 0x0002 - -/* AR531X_ISR register bit field definitions */ -#define AR531X_ISR_NONE 0x0000 -#define AR531X_ISR_TIMER 0x0001 -#define AR531X_ISR_AHBPROC 0x0002 -#define AR531X_ISR_AHBDMA 0x0004 -#define AR531X_ISR_GPIO 0x0008 -#define AR531X_ISR_UART0 0x0010 -#define AR531X_ISR_UART0DMA 0x0020 -#define AR531X_ISR_WD 0x0040 -#define AR531X_ISR_LOCAL 0x0080 - -/* AR531X_RESET register bit field definitions */ -#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ -#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ -#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ -#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ -#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ -#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ -#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ -#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ -#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ -#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ -#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ -#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ -#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ -#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ -#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ -#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ -#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ -#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ - -#define AR531X_RESET_WMAC0_BITS \ - AR531X_RESET_WLAN0 |\ - AR531X_RESET_WARM_WLAN0_MAC |\ - AR531X_RESET_WARM_WLAN0_BB - -#define AR531X_RESERT_WMAC1_BITS \ - AR531X_RESET_WLAN1 |\ - AR531X_RESET_WARM_WLAN1_MAC |\ - AR531X_RESET_WARM_WLAN1_BB - -/* AR5312_CLOCKCTL1 register bit field definitions */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR5312 and AR2312 */ -#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 -#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 -#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 -#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 -#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 - -/* Valid for AR2313 */ -#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 -#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 -#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 -#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 -#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 - - -/* AR531X_ENABLE register bit field definitions */ -#define AR531X_ENABLE_WLAN0 0x0001 -#define AR531X_ENABLE_ENET0 0x0002 -#define AR531X_ENABLE_ENET1 0x0004 -#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ -#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ -#define AR531X_ENABLE_WLAN1 \ - (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) - -/* AR531X_REV register bit field definitions */ -#define AR531X_REV_WMAC_MAJ 0xf000 -#define AR531X_REV_WMAC_MAJ_S 12 -#define AR531X_REV_WMAC_MIN 0x0f00 -#define AR531X_REV_WMAC_MIN_S 8 -#define AR531X_REV_MAJ 0x00f0 -#define AR531X_REV_MAJ_S 4 -#define AR531X_REV_MIN 0x000f -#define AR531X_REV_MIN_S 0 -#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN) - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define AR531X_REV_MAJ_AR5312 0x4 -#define AR531X_REV_MAJ_AR2313 0x5 - -/* Minor revision numbers, bits 3..0 of Revision ID register */ -#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ -#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ - -/* AR531X_FLASHCTL register bit field definitions */ -#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ -#define FLASHCTL_IDCY_S 0 -#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ -#define FLASHCTL_WST1_S 5 -#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ -#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ -#define FLASHCTL_WST2_S 11 -#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ -#define FLASHCTL_AC_S 16 -#define FLASHCTL_AC_128K 0x00000000 -#define FLASHCTL_AC_256K 0x00010000 -#define FLASHCTL_AC_512K 0x00020000 -#define FLASHCTL_AC_1M 0x00030000 -#define FLASHCTL_AC_2M 0x00040000 -#define FLASHCTL_AC_4M 0x00050000 -#define FLASHCTL_AC_8M 0x00060000 -#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ -#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ -#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ -#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ -#define FLASHCTL_WP 0x04000000 /* Write protect */ -#define FLASHCTL_BM 0x08000000 /* Burst mode */ -#define FLASHCTL_MW 0x30000000 /* Memory width */ -#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ -#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ -#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ -#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ -#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ -#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ - -/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ -#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) -#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) -#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) - -/* ARM SDRAM Controller -- just enough to determine memory size */ -#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) -#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ -#define MEM_CFG1_AC0_S 8 -#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ -#define MEM_CFG1_AC1_S 12 - -/* GPIO Address Map */ -#define AR531X_GPIO (AR531X_APBBASE + 0x2000) -#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ -#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ -#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ - -/* GPIO Control Register bit field definitions */ -#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ -#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ - -#endif - diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h deleted file mode 100644 index 8ad8810b3c..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar5315/ar5315.h +++ /dev/null @@ -1,694 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006 Felix Fietkau - */ - -#ifndef AR5315_H -#define AR5315_H - -/* - * IRQs - */ -#define AR5315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ -#define AR5315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ -#define AR5315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ -#define AR5315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ -#define AR5315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ - - -/* - * Address map - */ -#define AR5315_SDRAM0 0x00000000 /* DRAM */ -#define AR5315_SPI_READ 0x08000000 /* SPI FLASH */ -#define AR5315_WLAN0 0xB0000000 /* Wireless MMR */ -#define AR5315_PCI 0xB0100000 /* PCI MMR */ -#define AR5315_SDRAMCTL 0xB0300000 /* SDRAM MMR */ -#define AR5315_LOCAL 0xB0400000 /* LOCAL BUS MMR */ -#define AR5315_ENET0 0xB0500000 /* ETHERNET MMR */ -#define AR5315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ -#define AR5315_UART0 0xB1100003 /* UART MMR */ -#define AR5315_SPI 0xB1300000 /* SPI FLASH MMR */ -#define AR5315_FLASHBT 0xBfc00000 /* ro boot alias to FLASH */ -#define AR5315_RAM1 0x40000000 /* ram alias */ -#define AR5315_PCIEXT 0x80000000 /* pci external */ -#define AR5315_RAM2 0xc0000000 /* ram alias */ -#define AR5315_RAM3 0xe0000000 /* ram alias */ - -/* - * Reset Register - */ -#define AR5315_COLD_RESET (AR5315_DSLBASE + 0x0000) - -/* Cold Reset */ -#define RESET_COLD_AHB 0x00000001 -#define RESET_COLD_APB 0x00000002 -#define RESET_COLD_CPU 0x00000004 -#define RESET_COLD_CPUWARM 0x00000008 -#define RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ - -#define AR5317_RESET_SYSTEM 0x00000010 - -/* Warm Reset */ - -#define AR5315_RESET (AR5315_DSLBASE + 0x0004) - -#define AR5315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ -#define AR5315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ -#define AR5315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ -#define AR5315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ -#define AR5315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */ -#define AR5315_RESET_LOCAL 0x00000020 /* warm reset local bus */ -#define AR5315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ -#define AR5315_RESET_SPI 0x00000080 /* warm reset SPI interface */ -#define AR5315_RESET_UART0 0x00000100 /* warm reset UART0 */ -#define AR5315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ -#define AR5315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ -#define AR5315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ - -/* - * AHB master arbitration control - */ -#define AR5315_AHB_ARB_CTL (AR5315_DSLBASE + 0x0008) - -#define ARB_CPU 0x00000001 /* CPU, default */ -#define ARB_WLAN 0x00000002 /* WLAN */ -#define ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ -#define ARB_LOCAL 0x00000008 /* LOCAL */ -#define ARB_PCI 0x00000010 /* PCI */ -#define ARB_ETHERNET 0x00000020 /* Ethernet */ -#define ARB_RETRY 0x00000100 /* retry policy, debug only */ - -/* - * Config Register - */ -#define AR5315_ENDIAN_CTL (AR5315_DSLBASE + 0x000c) - -#define AR5315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ -#define AR5315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ -#define AR5315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ -#define AR5315_CONFIG_PCI 0x00000008 /* PCI byteswap */ -#define AR5315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ -#define AR5315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ -#define AR5315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ - -#define AR5315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ -#define AR5315_CONFIG_CPU 0x00000400 /* CPU big endian */ -#define AR5315_CONFIG_PCIAHB 0x00000800 -#define AR5315_CONFIG_PCIAHB_BRIDGE 0x00001000 -#define AR5315_CONFIG_SPI 0x00008000 /* SPI byteswap */ -#define AR5315_CONFIG_CPU_DRAM 0x00010000 -#define AR5315_CONFIG_CPU_PCI 0x00020000 -#define AR5315_CONFIG_CPU_MMR 0x00040000 -#define AR5315_CONFIG_BIG 0x00000400 - - -/* - * NMI control - */ -#define AR5315_NMI_CTL (AR5315_DSLBASE + 0x0010) - -#define NMI_EN 1 - -/* - * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). - */ -#define AR5315_SREV (AR5315_DSLBASE + 0x0014) - -#define AR5315_REV_MAJ 0x00f0 -#define AR5315_REV_MAJ_S 4 -#define AR5315_REV_MIN 0x000f -#define AR5315_REV_MIN_S 0 -#define AR5315_REV_CHIP (AR5315_REV_MAJ|AR5315_REV_MIN) - -/* - * Interface Enable - */ -#define AR5315_IF_CTL (AR5315_DSLBASE + 0x0018) - -#define IF_MASK 0x00000007 -#define IF_DISABLED 0 -#define IF_PCI 1 -#define IF_TS_LOCAL 2 -#define IF_ALL 3 /* only for emulation with separate pins */ -#define IF_LOCAL_HOST 0x00000008 -#define IF_PCI_HOST 0x00000010 -#define IF_PCI_INTR 0x00000020 -#define IF_PCI_CLK_MASK 0x00030000 -#define IF_PCI_CLK_INPUT 0 -#define IF_PCI_CLK_OUTPUT_LOW 1 -#define IF_PCI_CLK_OUTPUT_CLK 2 -#define IF_PCI_CLK_OUTPUT_HIGH 3 -#define IF_PCI_CLK_SHIFT 16 - - -/* Major revision numbers, bits 7..4 of Revision ID register */ -#define REV_MAJ_AR5311 0x01 -#define REV_MAJ_AR5312 0x04 -#define REV_MAJ_AR5315 0x0B - -/* - * APB Interrupt control - */ - -#define AR5315_ISR (AR5315_DSLBASE + 0x0020) -#define AR5315_IMR (AR5315_DSLBASE + 0x0024) -#define AR5315_GISR (AR5315_DSLBASE + 0x0028) - -#define AR5315_ISR_UART0 0x0001 /* high speed UART */ -#define AR5315_ISR_I2C_RSVD 0x0002 /* I2C bus */ -#define AR5315_ISR_SPI 0x0004 /* SPI bus */ -#define AR5315_ISR_AHB 0x0008 /* AHB error */ -#define AR5315_ISR_APB 0x0010 /* APB error */ -#define AR5315_ISR_TIMER 0x0020 /* timer */ -#define AR5315_ISR_GPIO 0x0040 /* GPIO */ -#define AR5315_ISR_WD 0x0080 /* watchdog */ -#define AR5315_ISR_IR_RSVD 0x0100 /* IR */ - -#define AR5315_GISR_MISC 0x0001 -#define AR5315_GISR_WLAN0 0x0002 -#define AR5315_GISR_MPEGTS_RSVD 0x0004 -#define AR5315_GISR_LOCALPCI 0x0008 -#define AR5315_GISR_WMACPOLL 0x0010 -#define AR5315_GISR_TIMER 0x0020 -#define AR5315_GISR_ETHERNET 0x0040 - -/* - * Interrupt routing from IO to the processor IP bits - * Define our inter mask and level - */ -#define AR5315_INTR_MISCIO SR_IBIT3 -#define AR5315_INTR_WLAN0 SR_IBIT4 -#define AR5315_INTR_ENET0 SR_IBIT5 -#define AR5315_INTR_LOCALPCI SR_IBIT6 -#define AR5315_INTR_WMACPOLL SR_IBIT7 -#define AR5315_INTR_COMPARE SR_IBIT8 - -/* - * Timers - */ -#define AR5315_TIMER (AR5315_DSLBASE + 0x0030) -#define AR5315_RELOAD (AR5315_DSLBASE + 0x0034) -#define AR5315_WD (AR5315_DSLBASE + 0x0038) -#define AR5315_WDC (AR5315_DSLBASE + 0x003c) - -#define WDC_RESET 0x00000002 /* reset on watchdog */ -#define WDC_NMI 0x00000001 /* NMI on watchdog */ -#define WDC_IGNORE_EXPIRATION 0x00000000 - -/* - * CPU Performance Counters - */ -#define AR5315_PERFCNT0 (AR5315_DSLBASE + 0x0048) -#define AR5315_PERFCNT1 (AR5315_DSLBASE + 0x004c) - -#define PERF_DATAHIT 0x0001 /* Count Data Cache Hits */ -#define PERF_DATAMISS 0x0002 /* Count Data Cache Misses */ -#define PERF_INSTHIT 0x0004 /* Count Instruction Cache Hits */ -#define PERF_INSTMISS 0x0008 /* Count Instruction Cache Misses */ -#define PERF_ACTIVE 0x0010 /* Count Active Processor Cycles */ -#define PERF_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ -#define PERF_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ - -#define PERF_EB_ARDY 0x0001 /* Count EB_ARdy signal */ -#define PERF_EB_AVALID 0x0002 /* Count EB_AValid signal */ -#define PERF_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ -#define PERF_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ -#define PERF_VRADDR 0x0010 /* Count valid read address cycles */ -#define PERF_VWADDR 0x0020 /* Count valid write address cycles */ -#define PERF_VWDATA 0x0040 /* Count valid write data cycles */ - -/* - * AHB Error Reporting. - */ -#define AR5315_AHB_ERR0 (AR5315_DSLBASE + 0x0050) /* error */ -#define AR5315_AHB_ERR1 (AR5315_DSLBASE + 0x0054) /* haddr */ -#define AR5315_AHB_ERR2 (AR5315_DSLBASE + 0x0058) /* hwdata */ -#define AR5315_AHB_ERR3 (AR5315_DSLBASE + 0x005c) /* hrdata */ -#define AR5315_AHB_ERR4 (AR5315_DSLBASE + 0x0060) /* status */ - -#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ - /* write 1 to clear all bits in ERR0 */ -#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ -#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ - -#define PROCERR_HMAST 0x0000000f -#define PROCERR_HMAST_DFLT 0 -#define PROCERR_HMAST_WMAC 1 -#define PROCERR_HMAST_ENET 2 -#define PROCERR_HMAST_PCIENDPT 3 -#define PROCERR_HMAST_LOCAL 4 -#define PROCERR_HMAST_CPU 5 -#define PROCERR_HMAST_PCITGT 6 - -#define PROCERR_HMAST_S 0 -#define PROCERR_HWRITE 0x00000010 -#define PROCERR_HSIZE 0x00000060 -#define PROCERR_HSIZE_S 5 -#define PROCERR_HTRANS 0x00000180 -#define PROCERR_HTRANS_S 7 -#define PROCERR_HBURST 0x00000e00 -#define PROCERR_HBURST_S 9 - - - -/* - * Clock Control - */ -#define AR5315_PLLC_CTL (AR5315_DSLBASE + 0x0064) -#define AR5315_PLLV_CTL (AR5315_DSLBASE + 0x0068) -#define AR5315_CPUCLK (AR5315_DSLBASE + 0x006c) -#define AR5315_AMBACLK (AR5315_DSLBASE + 0x0070) -#define AR5315_SYNCCLK (AR5315_DSLBASE + 0x0074) -#define AR5315_DSL_SLEEP_CTL (AR5315_DSLBASE + 0x0080) -#define AR5315_DSL_SLEEP_DUR (AR5315_DSLBASE + 0x0084) - -/* PLLc Control fields */ -#define PLLC_REF_DIV_M 0x00000003 -#define PLLC_REF_DIV_S 0 -#define PLLC_FDBACK_DIV_M 0x0000007C -#define PLLC_FDBACK_DIV_S 2 -#define PLLC_ADD_FDBACK_DIV_M 0x00000080 -#define PLLC_ADD_FDBACK_DIV_S 7 -#define PLLC_CLKC_DIV_M 0x0001c000 -#define PLLC_CLKC_DIV_S 14 -#define PLLC_CLKM_DIV_M 0x00700000 -#define PLLC_CLKM_DIV_S 20 - -/* CPU CLK Control fields */ -#define CPUCLK_CLK_SEL_M 0x00000003 -#define CPUCLK_CLK_SEL_S 0 -#define CPUCLK_CLK_DIV_M 0x0000000c -#define CPUCLK_CLK_DIV_S 2 - -/* AMBA CLK Control fields */ -#define AMBACLK_CLK_SEL_M 0x00000003 -#define AMBACLK_CLK_SEL_S 0 -#define AMBACLK_CLK_DIV_M 0x0000000c -#define AMBACLK_CLK_DIV_S 2 - -#if defined(COBRA_EMUL) -#define AR5315_AMBA_CLOCK_RATE 20000000 -#define AR5315_CPU_CLOCK_RATE 40000000 -#else -#if defined(DEFAULT_PLL) -#define AR5315_AMBA_CLOCK_RATE 40000000 -#define AR5315_CPU_CLOCK_RATE 40000000 -#else -#define AR5315_AMBA_CLOCK_RATE 92000000 -#define AR5315_CPU_CLOCK_RATE 184000000 -#endif /* ! DEFAULT_PLL */ -#endif /* ! COBRA_EMUL */ - -#define AR5315_UART_CLOCK_RATE AR5315_AMBA_CLOCK_RATE -#define AR5315_SDRAM_CLOCK_RATE AR5315_AMBA_CLOCK_RATE - -/* - * The UART computes baud rate as: - * baud = clock / (16 * divisor) - * where divisor is specified as a High Byte (DLM) and a Low Byte (DLL). - */ -#define DESIRED_BAUD_RATE 38400 - - -#define CLOCKCTL_UART0 0x0010 /* enable UART0 external clock */ - - - /* - * Applicable "PCICFG" bits for WLAN(s). Assoc status and LED mode. - */ -#define ASSOC_STATUS_M 0x00000003 -#define ASSOC_STATUS_NONE 0 -#define ASSOC_STATUS_PENDING 1 -#define ASSOC_STATUS_ASSOCIATED 2 -#define LED_MODE_M 0x0000001c -#define LED_BLINK_THRESHOLD_M 0x000000e0 -#define LED_SLOW_BLINK_MODE 0x00000100 - -/* - * GPIO - */ - -#define AR5315_GPIO_DI (AR5315_DSLBASE + 0x0088) -#define AR5315_GPIO_DO (AR5315_DSLBASE + 0x0090) -#define AR5315_GPIO_CR (AR5315_DSLBASE + 0x0098) -#define AR5315_GPIO_INT (AR5315_DSLBASE + 0x00a0) - -#define AR5315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -#define AR5315_GPIO_CR_O(x) (1 << (x)) /* output */ -#define AR5315_GPIO_CR_I(x) (0) /* input */ - -#define AR5315_GPIO_INT_S(x) (x) /* interrupt enable */ -#define AR5315_GPIO_INT_M (0x3F) /* mask for int */ -#define AR5315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ -#define AR5315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ - -#define AR5315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */ -#define AR5315_GPIO_INT_LVL_OFF 0 /* Triggerring off */ -#define AR5315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */ -#define AR5315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */ -#define AR5315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */ - -#define AR5315_RESET_GPIO 5 -#define AR5315_NUM_GPIO 22 - - -/* - * PCI Clock Control - */ - -#define AR5315_PCICLK (AR5315_DSLBASE + 0x00a4) - -#define AR5315_PCICLK_INPUT_M 0x3 -#define AR5315_PCICLK_INPUT_S 0 - -#define AR5315_PCICLK_PLLC_CLKM 0 -#define AR5315_PCICLK_PLLC_CLKM1 1 -#define AR5315_PCICLK_PLLC_CLKC 2 -#define AR5315_PCICLK_REF_CLK 3 - -#define AR5315_PCICLK_DIV_M 0xc -#define AR5315_PCICLK_DIV_S 2 - -#define AR5315_PCICLK_IN_FREQ 0 -#define AR5315_PCICLK_IN_FREQ_DIV_6 1 -#define AR5315_PCICLK_IN_FREQ_DIV_8 2 -#define AR5315_PCICLK_IN_FREQ_DIV_10 3 - -/* - * Observation Control Register - */ -#define AR5315_OCR (AR5315_DSLBASE + 0x00b0) -#define OCR_GPIO0_IRIN 0x0040 -#define OCR_GPIO1_IROUT 0x0080 -#define OCR_GPIO3_RXCLR 0x0200 - -/* - * General Clock Control - */ - -#define AR5315_MISCCLK (AR5315_DSLBASE + 0x00b4) -#define MISCCLK_PLLBYPASS_EN 0x00000001 -#define MISCCLK_PROCREFCLK 0x00000002 - -/* - * SDRAM Controller - * - No read or write buffers are included. - */ -#define AR5315_MEM_CFG (AR5315_SDRAMCTL + 0x00) -#define AR5315_MEM_CTRL (AR5315_SDRAMCTL + 0x0c) -#define AR5315_MEM_REF (AR5315_SDRAMCTL + 0x10) - -#define SDRAM_DATA_WIDTH_M 0x00006000 -#define SDRAM_DATA_WIDTH_S 13 - -#define SDRAM_COL_WIDTH_M 0x00001E00 -#define SDRAM_COL_WIDTH_S 9 - -#define SDRAM_ROW_WIDTH_M 0x000001E0 -#define SDRAM_ROW_WIDTH_S 5 - -#define SDRAM_BANKADDR_BITS_M 0x00000018 -#define SDRAM_BANKADDR_BITS_S 3 - -/* - * SPI Flash Interface Registers - */ - -#define AR5315_SPI_CTL (AR5315_SPI + 0x00) -#define AR5315_SPI_OPCODE (AR5315_SPI + 0x04) -#define AR5315_SPI_DATA (AR5315_SPI + 0x08) - -#define SPI_CTL_START 0x00000100 -#define SPI_CTL_BUSY 0x00010000 -#define SPI_CTL_TXCNT_MASK 0x0000000f -#define SPI_CTL_RXCNT_MASK 0x000000f0 -#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -#define SPI_CTL_SIZE_MASK 0x00060000 - -#define SPI_CTL_CLK_SEL_MASK 0x03000000 -#define SPI_OPCODE_MASK 0x000000ff - -/* - * PCI-MAC Configuration registers - */ -#define PCI_MAC_RC (AR5315_PCI + 0x4000) -#define PCI_MAC_SCR (AR5315_PCI + 0x4004) -#define PCI_MAC_INTPEND (AR5315_PCI + 0x4008) -#define PCI_MAC_SFR (AR5315_PCI + 0x400C) -#define PCI_MAC_PCICFG (AR5315_PCI + 0x4010) -#define PCI_MAC_SREV (AR5315_PCI + 0x4020) - -#define PCI_MAC_RC_MAC 0x00000001 -#define PCI_MAC_RC_BB 0x00000002 - -#define PCI_MAC_SCR_SLMODE_M 0x00030000 -#define PCI_MAC_SCR_SLMODE_S 16 -#define PCI_MAC_SCR_SLM_FWAKE 0 -#define PCI_MAC_SCR_SLM_FSLEEP 1 -#define PCI_MAC_SCR_SLM_NORMAL 2 - -#define PCI_MAC_SFR_SLEEP 0x00000001 - -#define PCI_MAC_PCICFG_SPWR_DN 0x00010000 - - -/* - * PCI Bus Interface Registers - */ -#define AR5315_PCI_1MS_REG (AR5315_PCI + 0x0008) -#define AR5315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ - -#define AR5315_PCI_MISC_CONFIG (AR5315_PCI + 0x000c) -#define AR5315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ -#define AR5315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ -#define AR5315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ -#define AR5315_PCIMISC_RST_MODE 0x00000030 -#define AR5315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ -#define AR5315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ -#define AR5315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ -#define AR5315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ -#define AR5315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ -#define AR5315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ -#define AR5315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ -#define AR5315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ - -#define AR5315_PCI_OUT_TSTAMP (AR5315_PCI + 0x0010) - -#define AR5315_PCI_UNCACHE_CFG (AR5315_PCI + 0x0014) - -#define AR5315_PCI_IN_EN (AR5315_PCI + 0x0100) -#define AR5315_PCI_IN_EN0 0x01 /* Enable chain 0 */ -#define AR5315_PCI_IN_EN1 0x02 /* Enable chain 1 */ -#define AR5315_PCI_IN_EN2 0x04 /* Enable chain 2 */ -#define AR5315_PCI_IN_EN3 0x08 /* Enable chain 3 */ - -#define AR5315_PCI_IN_DIS (AR5315_PCI + 0x0104) -#define AR5315_PCI_IN_DIS0 0x01 /* Disable chain 0 */ -#define AR5315_PCI_IN_DIS1 0x02 /* Disable chain 1 */ -#define AR5315_PCI_IN_DIS2 0x04 /* Disable chain 2 */ -#define AR5315_PCI_IN_DIS3 0x08 /* Disable chain 3 */ - -#define AR5315_PCI_IN_PTR (AR5315_PCI + 0x0200) - -#define AR5315_PCI_OUT_EN (AR5315_PCI + 0x0400) -#define AR5315_PCI_OUT_EN0 0x01 /* Enable chain 0 */ - -#define AR5315_PCI_OUT_DIS (AR5315_PCI + 0x0404) -#define AR5315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ - -#define AR5315_PCI_OUT_PTR (AR5315_PCI + 0x0408) - -#define AR5315_PCI_INT_STATUS (AR5315_PCI + 0x0500) /* write one to clr */ -#define AR5315_PCI_TXINT 0x00000001 /* Desc In Completed */ -#define AR5315_PCI_TXOK 0x00000002 /* Desc In OK */ -#define AR5315_PCI_TXERR 0x00000004 /* Desc In ERR */ -#define AR5315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ -#define AR5315_PCI_RXINT 0x00000010 /* Desc Out Completed */ -#define AR5315_PCI_RXOK 0x00000020 /* Desc Out OK */ -#define AR5315_PCI_RXERR 0x00000040 /* Desc Out ERR */ -#define AR5315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ -#define AR5315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ -#define AR5315_PCI_MASK 0x0000FFFF /* Desc Mask */ -#define AR5315_PCI_EXT_INT 0x02000000 -#define AR5315_PCI_ABORT_INT 0x04000000 - -#define AR5315_PCI_INT_MASK (AR5315_PCI + 0x0504) /* same as INT_STATUS */ - -#define AR5315_PCI_INTEN_REG (AR5315_PCI + 0x0508) -#define AR5315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ -#define AR5315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ - -#define AR5315_PCI_HOST_IN_EN (AR5315_PCI + 0x0800) -#define AR5315_PCI_HOST_IN_DIS (AR5315_PCI + 0x0804) -#define AR5315_PCI_HOST_IN_PTR (AR5315_PCI + 0x0810) -#define AR5315_PCI_HOST_OUT_EN (AR5315_PCI + 0x0900) -#define AR5315_PCI_HOST_OUT_DIS (AR5315_PCI + 0x0904) -#define AR5315_PCI_HOST_OUT_PTR (AR5315_PCI + 0x0908) - - -/* - * Local Bus Interface Registers - */ -#define AR5315_LB_CONFIG (AR5315_LOCAL + 0x0000) -#define AR5315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ -#define AR5315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ -#define AR5315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ -#define AR5315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ -#define AR5315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ -#define AR5315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ -#define AR5315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ -#define AR5315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ -#define AR5315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ -#define AR5315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ -#define AR5315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ -#define AR5315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ -#define AR5315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ -#define AR5315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ -#define AR5315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ -#define AR5315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ -#define AR5315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ -#define AR5315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ -#define AR5315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ -#define AR5315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ -#define AR5315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ -#define AR5315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ -#define AR5315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ -#define AR5315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ -#define AR5315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ - -#define AR5315_LB_CLKSEL (AR5315_LOCAL + 0x0004) -#define AR5315_LBCLK_EXT 0x0001 /* use external clk for lb */ - -#define AR5315_LB_1MS (AR5315_LOCAL + 0x0008) -#define AR5315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ - -#define AR5315_LB_MISCCFG (AR5315_LOCAL + 0x000C) -#define AR5315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ -#define AR5315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ -#define AR5315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ -#define AR5315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ -#define AR5315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ -#define AR5315_LBM_TIMEOUT_MASK 0x00FFFF80 -#define AR5315_LBM_TIMEOUT_SHFT 7 -#define AR5315_LBM_PORTMUX 0x07000000 - - -#define AR5315_LB_RXTSOFF (AR5315_LOCAL + 0x0010) - -#define AR5315_LB_TX_CHAIN_EN (AR5315_LOCAL + 0x0100) -#define AR5315_LB_TXEN_0 0x01 -#define AR5315_LB_TXEN_1 0x02 -#define AR5315_LB_TXEN_2 0x04 -#define AR5315_LB_TXEN_3 0x08 - -#define AR5315_LB_TX_CHAIN_DIS (AR5315_LOCAL + 0x0104) -#define AR5315_LB_TX_DESC_PTR (AR5315_LOCAL + 0x0200) - -#define AR5315_LB_RX_CHAIN_EN (AR5315_LOCAL + 0x0400) -#define AR5315_LB_RXEN 0x01 - -#define AR5315_LB_RX_CHAIN_DIS (AR5315_LOCAL + 0x0404) -#define AR5315_LB_RX_DESC_PTR (AR5315_LOCAL + 0x0408) - -#define AR5315_LB_INT_STATUS (AR5315_LOCAL + 0x0500) -#define AR5315_INT_TX_DESC 0x0001 -#define AR5315_INT_TX_OK 0x0002 -#define AR5315_INT_TX_ERR 0x0004 -#define AR5315_INT_TX_EOF 0x0008 -#define AR5315_INT_RX_DESC 0x0010 -#define AR5315_INT_RX_OK 0x0020 -#define AR5315_INT_RX_ERR 0x0040 -#define AR5315_INT_RX_EOF 0x0080 -#define AR5315_INT_TX_TRUNC 0x0100 -#define AR5315_INT_TX_STARVE 0x0200 -#define AR5315_INT_LB_TIMEOUT 0x0400 -#define AR5315_INT_LB_ERR 0x0800 -#define AR5315_INT_MBOX_WR 0x1000 -#define AR5315_INT_MBOX_RD 0x2000 - -/* Bit definitions for INT MASK are the same as INT_STATUS */ -#define AR5315_LB_INT_MASK (AR5315_LOCAL + 0x0504) - -#define AR5315_LB_INT_EN (AR5315_LOCAL + 0x0508) -#define AR5315_LB_MBOX (AR5315_LOCAL + 0x0600) - - - -/* - * IR Interface Registers - */ -#define AR5315_IR_PKTDATA (AR5315_IR + 0x0000) - -#define AR5315_IR_PKTLEN (AR5315_IR + 0x07fc) /* 0 - 63 */ - -#define AR5315_IR_CONTROL (AR5315_IR + 0x0800) -#define AR5315_IRCTL_TX 0x00000000 /* use as tranmitter */ -#define AR5315_IRCTL_RX 0x00000001 /* use as receiver */ -#define AR5315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ -#define AR5315_IRCTL_SAMPLECLK_SHFT 1 -#define AR5315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ -#define AR5315_IRCTL_OUTPUTCLK_SHFT 14 - -#define AR5315_IR_STATUS (AR5315_IR + 0x0804) -#define AR5315_IRSTS_RX 0x00000001 /* receive in progress */ -#define AR5315_IRSTS_TX 0x00000002 /* transmit in progress */ - -#define AR5315_IR_CONFIG (AR5315_IR + 0x0808) -#define AR5315_IRCFG_INVIN 0x00000001 /* invert input polarity */ -#define AR5315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ -#define AR5315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ -#define AR5315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ -#define AR5315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ -#define AR5315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ -#define AR5315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ -#define AR5315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ -#define AR5315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ - -/* - * PCI memory constants: Memory area 1 and 2 are the same size - - * (twice the PCI_TLB_PAGE_SIZE). The definition of - * CPU_TO_PCI_MEM_SIZE is coupled with the TLB setup routine - * sysLib.c/sysTlbInit(), in that it assumes that 2 pages of size - * PCI_TLB_PAGE_SIZE are set up in the TLB for each PCI memory space. - */ - -#define CPU_TO_PCI_MEM_BASE1 0xE0000000 -#define CPU_TO_PCI_MEM_SIZE1 (2*PCI_TLB_PAGE_SIZE) - - -/* TLB attributes for PCI transactions */ - -#define PCI_MMU_PAGEMASK 0x00003FFF -#define MMU_PAGE_UNCACHED 0x00000010 -#define MMU_PAGE_DIRTY 0x00000004 -#define MMU_PAGE_VALID 0x00000002 -#define MMU_PAGE_GLOBAL 0x00000001 -#define PCI_MMU_PAGEATTRIB (MMU_PAGE_UNCACHED|MMU_PAGE_DIRTY|\ - MMU_PAGE_VALID|MMU_PAGE_GLOBAL) -#define PCI_MEMORY_SPACE1_VIRT 0xE0000000 /* Used for non-prefet mem */ -#define PCI_MEMORY_SPACE1_PHYS 0x80000000 -#define PCI_TLB_PAGE_SIZE 0x01000000 -#define TLB_HI_MASK 0xFFFFE000 -#define TLB_LO_MASK 0x3FFFFFFF -#define PAGEMASK_SHIFT 11 -#define TLB_LO_SHIFT 6 - -#define PCI_MAX_LATENCY 0xFFF /* Max PCI latency */ - -#define HOST_PCI_DEV_ID 3 -#define HOST_PCI_MBAR0 0x10000000 -#define HOST_PCI_MBAR1 0x20000000 -#define HOST_PCI_MBAR2 0x30000000 - -#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 -#define PCI_DEVICE_MEM_SPACE 0x800000 - -#endif - diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h deleted file mode 100644 index 8148b76fba..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x.h +++ /dev/null @@ -1,149 +0,0 @@ -#ifndef __AR531X_H -#define __AR531X_H - -#include -#include -#include -#include -#include - -#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)) -extern void (*board_time_init)(void); -#endif - -/* - * Atheros CPUs before the AR2315 are using MIPS 4Kc core, later designs are - * using MIPS 4KEc R2 core. This makes it easy to determine the board at runtime. - */ -#ifdef CONFIG_ATHEROS_AR5312 -#define DO_AR5312(...) \ - if (current_cpu_data.cputype != CPU_4KEC) { \ - __VA_ARGS__ \ - } -#else -#define DO_AR5312(...) -#endif -#ifdef CONFIG_ATHEROS_AR5315 -#define DO_AR5315(...) \ - if (current_cpu_data.cputype == CPU_4KEC) { \ - __VA_ARGS__ \ - } -#else -#define DO_AR5315(...) -#endif - -#define AR531X_MISC_IRQ_BASE 0x20 -#define AR531X_GPIO_IRQ_BASE 0x30 - -/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ -#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 -#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ - -/* Miscellaneous interrupts, which share IP6 */ -#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 -#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 -#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 -#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 -#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 -#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 -#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 -#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 -#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 -#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9 -#define AR531X_MISC_IRQ_COUNT 10 - -/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ -#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0 -#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n -#define AR531X_GPIO_IRQ_COUNT 22 - -#define sysRegRead(phys) \ - (*(volatile u32 *)KSEG1ADDR(phys)) - -#define sysRegWrite(phys, val) \ - ((*(volatile u32 *)KSEG1ADDR(phys)) = (val)) - -/* - * This is board-specific data that is stored in a "fixed" location in flash. - * It is shared across operating systems, so it should not be changed lightly. - * The main reason we need it is in order to extract the ethernet MAC - * address(es). - */ -struct ar531x_boarddata { - u32 magic; /* board data is valid */ -#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ - u16 cksum; /* checksum (starting with BD_REV 2) */ - u16 rev; /* revision of this struct */ -#define BD_REV 4 - char boardName[64]; /* Name of board */ - u16 major; /* Board major number */ - u16 minor; /* Board minor number */ - u32 config; /* Board configuration */ -#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ -#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ -#define BD_UART1 0x00000004 /* UART1 is stuffed */ -#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ -#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ -#define BD_SYSLED 0x00000020 /* System LED stuffed */ -#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ -#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ -#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ -#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ -#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ -#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ -#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ -#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ -#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ -#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ -#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ -#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ - u16 resetConfigGpio; /* Reset factory GPIO pin */ - u16 sysLedGpio; /* System LED GPIO pin */ - - u32 cpuFreq; /* CPU core frequency in Hz */ - u32 sysFreq; /* System frequency in Hz */ - u32 cntFreq; /* Calculated C0_COUNT frequency */ - - u8 wlan0Mac[6]; - u8 enet0Mac[6]; - u8 enet1Mac[6]; - - u16 pciId; /* Pseudo PCIID for common code */ - u16 memCap; /* cap bank1 in MB */ - - /* version 3 */ - u8 wlan1Mac[6]; /* (ar5212) */ -}; - -#define BOARD_CONFIG_BUFSZ 0x1000 - -extern char *board_config, *radio_config; -extern void serial_setup(unsigned long mapbase, unsigned int uartclk); -extern int ar531x_find_config(char *flash_limit); - -extern void ar5312_prom_init(void); -extern void ar5312_misc_intr_init(int irq_base); -extern void ar5312_plat_setup(void); -extern asmlinkage void ar5312_irq_dispatch(void); - -extern void ar5315_prom_init(void); -extern void ar5315_misc_intr_init(int irq_base); -extern void ar5315_plat_setup(void); -extern asmlinkage void ar5315_irq_dispatch(void); -extern void ar5315_pci_irq(int irq); -static inline u32 sysRegMask(u32 phys, u32 mask, u32 value) -{ - u32 reg; - - reg = sysRegRead(phys); - reg &= ~mask; - reg |= value & mask; - sysRegWrite(phys, reg); - reg = sysRegRead(phys); /* flush write to the hardware */ - - return reg; -} - -#define AR531X_NUM_GPIO 8 - -#endif diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h deleted file mode 100644 index bddcd59a0b..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/ar531x_platform.h +++ /dev/null @@ -1,28 +0,0 @@ -#ifndef __AR531X_PLATFORM_H -#define __AR531X_PLATFORM_H - -/* - * Board support data. The driver is required to locate - * and fill-in this information before passing a reference to - * this structure as the HAL_BUS_TAG parameter supplied to - * ath_hal_attach. - */ -struct ar531x_config { - const char *board; /* board config data */ - const char *radio; /* radio config data */ - int unit; /* unit number [0, 1] */ - u32 tag; /* used as devid for now */ -}; - -struct ar531x_eth { - int phy; - int mac; - u32 reset_base; - u32 reset_mac; - u32 reset_phy; - u32 phy_base; - char *board_config; - char *macaddr; -}; - -#endif /* __AR531X_PLATFORM_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h deleted file mode 100644 index 97f904b5f2..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/cpu-feature-overrides.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - * Atheros SoC specific CPU feature overrides - * - * Copyright (C) 2008 Gabor Juhos - * - * This file was derived from: include/asm-mips/cpu-features.h - * Copyright (C) 2003, 2004 Ralf Baechle - * Copyright (C) 2004 Maciej W. Rozycki - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - */ -#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H - -/* - * The ATHEROS SoCs have MIPS 4Kc/4KEc core. - */ -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_3k_cache 0 -#define cpu_has_4k_cache 1 -#define cpu_has_tx39_cache 0 -#define cpu_has_sb1_cache 0 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -/* #define cpu_has_watch ? */ -/* #define cpu_has_divec ? */ -/* #define cpu_has_vce ? */ -/* #define cpu_has_cache_cdex_p ? */ -/* #define cpu_has_cache_cdex_s ? */ -/* #define cpu_has_prefetch ? */ -/* #define cpu_has_mcheck ? */ -#define cpu_has_ejtag 1 - -#if !defined(CONFIG_ATHEROS_AR5312) -# define cpu_has_llsc 1 -#else -/* - * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the - * ll/sc instructions. - */ -# define cpu_has_llsc 0 -#endif - -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 - -/* #define cpu_has_vtag_icache ? */ -/* #define cpu_has_dc_aliases ? */ -/* #define cpu_has_ic_fills_f_dc ? */ -/* #define cpu_has_pindexed_dcache ? */ - -/* #define cpu_icache_snoops_remote_store ? */ - -#define cpu_has_mips32r1 1 - -#if !defined(CONFIG_ATHEROS_AR5312) -# define cpu_has_mips32r2 1 -#endif - -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 - -/* #define cpu_has_nofpuex ? */ -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 -#define cpu_has_64bit_gp_regs 0 -#define cpu_has_64bit_addresses 0 - -/* #define cpu_has_inclusive_pcaches ? */ - -/* #define cpu_dcache_line_size() ? */ -/* #define cpu_icache_line_size() ? */ - -#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h deleted file mode 100644 index fe53556881..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/dma-coherence.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2006 Ralf Baechle - * Copyright (C) 2007 Felix Fietkau - * - */ -#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H -#define __ASM_MACH_GENERIC_DMA_COHERENCE_H - -#define PCI_DMA_OFFSET 0x20000000 - -struct device; - -static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) -{ - return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0); -} - -static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) -{ - return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0); -} - -static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) -{ - return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr); -} - -static void plat_unmap_dma_mem(dma_addr_t dma_addr) -{ -} - -static inline int plat_device_is_coherent(struct device *dev) -{ - return 0; -} - -#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h deleted file mode 100644 index d09e59d2b4..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/gpio.h +++ /dev/null @@ -1,118 +0,0 @@ -#ifndef _ATHEROS_GPIO_H_ -#define _ATHEROS_GPIO_H_ - -#include "ar531x.h" - -/* Common AR531X global variables */ -/* extern u32 ar531x_gpio_intr_Mask; */ - -/* AR5312 exported routines */ -#ifdef CONFIG_ATHEROS_AR5312 -asmlinkage void ar5312_gpio_irq_dispatch(void); -#endif - -/* AR5315 exported routines */ -#ifdef CONFIG_ATHEROS_AR5315 -asmlinkage void ar5315_gpio_irq_dispatch(void); -#endif - -/* - * Wrappers for the generic GPIO layer - */ - -/* Sets a gpio to input, or returns ENXIO for non-existent gpio */ -static inline int gpio_direction_input(unsigned gpio) { - DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \ - return -ENXIO; \ - } else { \ - sysRegWrite(AR531X_GPIO_CR, \ - sysRegRead(AR531X_GPIO_CR) | \ - AR531X_GPIO_CR_I(gpio) ); \ - return 0; \ - } \ - ) - DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \ - return -ENXIO; \ - } else { \ - sysRegWrite(AR5315_GPIO_CR, \ - ( sysRegRead(AR5315_GPIO_CR) & \ - ~(AR5315_GPIO_CR_M(gpio)) ) | \ - AR5315_GPIO_CR_I(gpio) ); \ - return 0; \ - } \ - ) - return -ENXIO; -} - -/* Sets a gpio to output with value, or returns ENXIO for non-existent gpio */ -static inline int gpio_direction_output(unsigned gpio, int value) { - DO_AR5312( if (gpio > AR531X_NUM_GPIO) { \ - return -ENXIO; \ - } else { \ - sysRegWrite(AR531X_GPIO_DO, \ - ( (sysRegRead(AR531X_GPIO_DO) & \ - ~(1 << gpio) ) | \ - ((value!=0) << gpio)) ); \ - sysRegWrite(AR531X_GPIO_CR, \ - ( sysRegRead(AR531X_GPIO_CR) & \ - ~(AR531X_GPIO_CR_M(gpio)) )); \ - return 0; \ - } \ - ) - DO_AR5315( if (gpio > AR5315_NUM_GPIO) { \ - return -ENXIO; \ - } else { \ - sysRegWrite(AR5315_GPIO_DO, \ - ( (sysRegRead(AR5315_GPIO_DO) & \ - ~(1 << gpio)) | \ - ((value!=0) << gpio)) ); \ - sysRegWrite(AR5315_GPIO_CR, \ - sysRegRead(AR5315_GPIO_CR) | \ - AR5315_GPIO_CR_O(gpio) ); \ - return 0; \ - } \ - ) - return -ENXIO; -} - -/* Reads the gpio pin. Unchecked function */ -static inline int gpio_get_value(unsigned gpio) { - DO_AR5312(return (sysRegRead(AR531X_GPIO_DI) & (1 << gpio));) - DO_AR5315(return (sysRegRead(AR5315_GPIO_DI) & (1 << gpio));) - return 0; -} - -/* Writes to the gpio pin. Unchecked function */ -static inline void gpio_set_value(unsigned gpio, int value) { - DO_AR5312( sysRegWrite(AR531X_GPIO_DO, \ - ( (sysRegRead(AR531X_GPIO_DO) & \ - ~(1 << gpio)) | \ - ((value!=0) << gpio)) ); \ - ) - DO_AR5315( sysRegWrite(AR5315_GPIO_DO, \ - ( (sysRegRead(AR5315_GPIO_DO) & \ - ~(1 << gpio)) | \ - ((value!=0) << gpio)) ); \ - ) -} - -static inline int gpio_request(unsigned gpio, const char *label) { - return 0; -} - -static inline void gpio_free(unsigned gpio) { -} - -/* Returns IRQ to attach for gpio. Unchecked function */ -static inline int gpio_to_irq(unsigned gpio) { - return AR531X_GPIO_IRQ(gpio); -} - -/* Returns gpio for IRQ attached. Unchecked function */ -static inline int irq_to_gpio(unsigned irq) { - return (irq - (AR531X_GPIO_IRQ(0))); -} - -#include /* cansleep wrappers */ - -#endif diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h deleted file mode 100644 index e9fa4c5b16..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/reset.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __AR531X_RESET_H -#define __AR531X_RESET_H - -void ar531x_disable_reset_button(void); - -#endif /* __AR531X_RESET_H */ diff --git a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h b/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h deleted file mode 100644 index 354c6e6fd1..0000000000 --- a/target/linux/atheros/files-2.6.28/arch/mips/include/asm/mach-atheros/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Felix Fietkau - */ -#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H -#define __ASM_MIPS_MACH_ATHEROS_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */ diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c deleted file mode 100644 index 92d4fff997..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.c +++ /dev/null @@ -1,533 +0,0 @@ - -/* - * MTD driver for the SPI Flash Memory support. - * - * Copyright (c) 2005-2006 Atheros Communications Inc. - * Copyright (C) 2006-2007 FON Technology, SL. - * Copyright (C) 2006-2007 Imre Kaloz - * Copyright (C) 2006-2007 Felix Fietkau - * - * This code is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -/*=========================================================================== -** !!!! VERY IMPORTANT NOTICE !!!! FLASH DATA STORED IN LITTLE ENDIAN FORMAT -** -** This module contains the Serial Flash access routines for the Atheros SOC. -** The Atheros SOC integrates a SPI flash controller that is used to access -** serial flash parts. The SPI flash controller executes in "Little Endian" -** mode. THEREFORE, all WRITES and READS from the MIPS CPU must be -** BYTESWAPPED! The SPI Flash controller hardware by default performs READ -** ONLY byteswapping when accessed via the SPI Flash Alias memory region -** (Physical Address 0x0800_0000 - 0x0fff_ffff). The data stored in the -** flash sectors is stored in "Little Endian" format. -** -** The spiflash_write() routine performs byteswapping on all write -** operations. -**===========================================================================*/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "spiflash.h" - -#ifndef __BIG_ENDIAN -#error This driver currently only works with big endian CPU. -#endif - -#define MAX_PARTS 32 - -#define SPIFLASH "spiflash: " - -#define MIN(a,b) ((a) < (b) ? (a) : (b)) - -#define busy_wait(condition, wait) \ - do { \ - while (condition) { \ - spin_unlock_bh(&spidata->mutex); \ - if (wait > 1) \ - msleep(wait); \ - else if ((wait == 1) && need_resched()) \ - schedule(); \ - else \ - udelay(1); \ - spin_lock_bh(&spidata->mutex); \ - } \ - } while (0) - - -static __u32 spiflash_regread32(int reg); -static void spiflash_regwrite32(int reg, __u32 data); -static __u32 spiflash_sendcmd (int op, u32 addr); - -int __init spiflash_init (void); -void __exit spiflash_exit (void); -static int spiflash_probe_chip (void); -static int spiflash_erase (struct mtd_info *mtd,struct erase_info *instr); -static int spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf); -static int spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf); - -/* Flash configuration table */ -struct flashconfig { - __u32 byte_cnt; - __u32 sector_cnt; - __u32 sector_size; - __u32 cs_addrmask; -} flashconfig_tbl[MAX_FLASH] = - { - { 0, 0, 0, 0}, - { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE, 0x0}, - { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE, 0x0}, - { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE, 0x0}, - { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE, 0x0}, - { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE, 0x0} - }; - -/* Mapping of generic opcodes to STM serial flash opcodes */ -#define SPI_WRITE_ENABLE 0 -#define SPI_WRITE_DISABLE 1 -#define SPI_RD_STATUS 2 -#define SPI_WR_STATUS 3 -#define SPI_RD_DATA 4 -#define SPI_FAST_RD_DATA 5 -#define SPI_PAGE_PROGRAM 6 -#define SPI_SECTOR_ERASE 7 -#define SPI_BULK_ERASE 8 -#define SPI_DEEP_PWRDOWN 9 -#define SPI_RD_SIG 10 -#define SPI_MAX_OPCODES 11 - -struct opcodes { - __u16 code; - __s8 tx_cnt; - __s8 rx_cnt; -} stm_opcodes[] = { - {STM_OP_WR_ENABLE, 1, 0}, - {STM_OP_WR_DISABLE, 1, 0}, - {STM_OP_RD_STATUS, 1, 1}, - {STM_OP_WR_STATUS, 1, 0}, - {STM_OP_RD_DATA, 4, 4}, - {STM_OP_FAST_RD_DATA, 5, 0}, - {STM_OP_PAGE_PGRM, 8, 0}, - {STM_OP_SECTOR_ERASE, 4, 0}, - {STM_OP_BULK_ERASE, 1, 0}, - {STM_OP_DEEP_PWRDOWN, 1, 0}, - {STM_OP_RD_SIG, 4, 1}, -}; - -/* Driver private data structure */ -struct spiflash_data { - struct mtd_info *mtd; - struct mtd_partition *parsed_parts; /* parsed partitions */ - void *readaddr; /* memory mapped data for read */ - void *mmraddr; /* memory mapped register space */ - wait_queue_head_t wq; - spinlock_t mutex; - int state; -}; -enum { - FL_READY, - FL_READING, - FL_ERASING, - FL_WRITING -}; - -static struct spiflash_data *spidata; - -extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts); - -/***************************************************************************************************/ - -static __u32 -spiflash_regread32(int reg) -{ - volatile __u32 *data = (__u32 *)(spidata->mmraddr + reg); - - return (*data); -} - -static void -spiflash_regwrite32(int reg, __u32 data) -{ - volatile __u32 *addr = (__u32 *)(spidata->mmraddr + reg); - - *addr = data; - return; -} - - -static __u32 -spiflash_sendcmd (int op, u32 addr) -{ - u32 reg; - u32 mask; - struct opcodes *ptr_opcode; - - ptr_opcode = &stm_opcodes[op]; - busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0); - spiflash_regwrite32(SPI_FLASH_OPCODE, ((u32) ptr_opcode->code) | (addr << 8)); - - reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | - (ptr_opcode->rx_cnt << 4) | SPI_CTL_START; - - spiflash_regwrite32(SPI_FLASH_CTL, reg); - busy_wait(spiflash_regread32(SPI_FLASH_CTL) & SPI_CTL_BUSY, 0); - - if (!ptr_opcode->rx_cnt) - return 0; - - reg = (__u32) spiflash_regread32(SPI_FLASH_DATA); - - switch (ptr_opcode->rx_cnt) { - case 1: - mask = 0x000000ff; - break; - case 2: - mask = 0x0000ffff; - break; - case 3: - mask = 0x00ffffff; - break; - default: - mask = 0xffffffff; - break; - } - reg &= mask; - - return reg; -} - - - -/* Probe SPI flash device - * Function returns 0 for failure. - * and flashconfig_tbl array index for success. - */ -static int -spiflash_probe_chip (void) -{ - __u32 sig; - int flash_size; - - /* Read the signature on the flash device */ - spin_lock_bh(&spidata->mutex); - sig = spiflash_sendcmd(SPI_RD_SIG, 0); - spin_unlock_bh(&spidata->mutex); - - switch (sig) { - case STM_8MBIT_SIGNATURE: - flash_size = FLASH_1MB; - break; - case STM_16MBIT_SIGNATURE: - flash_size = FLASH_2MB; - break; - case STM_32MBIT_SIGNATURE: - flash_size = FLASH_4MB; - break; - case STM_64MBIT_SIGNATURE: - flash_size = FLASH_8MB; - break; - case STM_128MBIT_SIGNATURE: - flash_size = FLASH_16MB; - break; - default: - printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n"); - return (0); - } - - return (flash_size); -} - - -/* wait until the flash chip is ready and grab a lock */ -static int spiflash_wait_ready(int state) -{ - DECLARE_WAITQUEUE(wait, current); - -retry: - spin_lock_bh(&spidata->mutex); - if (spidata->state != FL_READY) { - set_current_state(TASK_UNINTERRUPTIBLE); - add_wait_queue(&spidata->wq, &wait); - spin_unlock_bh(&spidata->mutex); - schedule(); - remove_wait_queue(&spidata->wq, &wait); - - if(signal_pending(current)) - return 0; - - goto retry; - } - spidata->state = state; - - return 1; -} - -static inline void spiflash_done(void) -{ - spidata->state = FL_READY; - spin_unlock_bh(&spidata->mutex); - wake_up(&spidata->wq); -} - -static int -spiflash_erase (struct mtd_info *mtd,struct erase_info *instr) -{ - struct opcodes *ptr_opcode; - u32 temp, reg; - - /* sanity checks */ - if (instr->addr + instr->len > mtd->size) return (-EINVAL); - - if (!spiflash_wait_ready(FL_ERASING)) - return -EINTR; - - spiflash_sendcmd(SPI_WRITE_ENABLE, 0); - busy_wait((reg = spiflash_regread32(SPI_FLASH_CTL)) & SPI_CTL_BUSY, 0); - reg = spiflash_regread32(SPI_FLASH_CTL); - - ptr_opcode = &stm_opcodes[SPI_SECTOR_ERASE]; - temp = ((__u32)instr->addr << 8) | (__u32)(ptr_opcode->code); - spiflash_regwrite32(SPI_FLASH_OPCODE, temp); - - reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | ptr_opcode->tx_cnt | SPI_CTL_START; - spiflash_regwrite32(SPI_FLASH_CTL, reg); - - /* this will take some time */ - spin_unlock_bh(&spidata->mutex); - msleep(800); - spin_lock_bh(&spidata->mutex); - - busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 20); - spiflash_done(); - - instr->state = MTD_ERASE_DONE; - if (instr->callback) instr->callback (instr); - - return 0; -} - -static int -spiflash_read (struct mtd_info *mtd, loff_t from,size_t len,size_t *retlen,u_char *buf) -{ - u8 *read_addr; - - /* sanity checks */ - if (!len) return (0); - if (from + len > mtd->size) return (-EINVAL); - - /* we always read len bytes */ - *retlen = len; - - if (!spiflash_wait_ready(FL_READING)) - return -EINTR; - read_addr = (u8 *)(spidata->readaddr + from); - memcpy(buf, read_addr, len); - spiflash_done(); - - return 0; -} - -static int -spiflash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen,const u_char *buf) -{ - u32 opcode, bytes_left; - - *retlen = 0; - - /* sanity checks */ - if (!len) return (0); - if (to + len > mtd->size) return (-EINVAL); - - opcode = stm_opcodes[SPI_PAGE_PROGRAM].code; - bytes_left = len; - - do { - u32 xact_len, reg, page_offset, spi_data = 0; - - xact_len = MIN(bytes_left, sizeof(__u32)); - - /* 32-bit writes cannot span across a page boundary - * (256 bytes). This types of writes require two page - * program operations to handle it correctly. The STM part - * will write the overflow data to the beginning of the - * current page as opposed to the subsequent page. - */ - page_offset = (to & (STM_PAGE_SIZE - 1)) + xact_len; - - if (page_offset > STM_PAGE_SIZE) { - xact_len -= (page_offset - STM_PAGE_SIZE); - } - - if (!spiflash_wait_ready(FL_WRITING)) - return -EINTR; - - spiflash_sendcmd(SPI_WRITE_ENABLE, 0); - switch (xact_len) { - case 1: - spi_data = (u32) ((u8) *buf); - break; - case 2: - spi_data = (buf[1] << 8) | buf[0]; - break; - case 3: - spi_data = (buf[2] << 16) | (buf[1] << 8) | buf[0]; - break; - case 4: - spi_data = (buf[3] << 24) | (buf[2] << 16) | - (buf[1] << 8) | buf[0]; - break; - default: - spi_data = 0; - break; - } - - spiflash_regwrite32(SPI_FLASH_DATA, spi_data); - opcode = (opcode & SPI_OPCODE_MASK) | ((__u32)to << 8); - spiflash_regwrite32(SPI_FLASH_OPCODE, opcode); - - reg = spiflash_regread32(SPI_FLASH_CTL); - reg = (reg & ~SPI_CTL_TX_RX_CNT_MASK) | (xact_len + 4) | SPI_CTL_START; - spiflash_regwrite32(SPI_FLASH_CTL, reg); - - /* give the chip some time before we start busy waiting */ - spin_unlock_bh(&spidata->mutex); - schedule(); - spin_lock_bh(&spidata->mutex); - - busy_wait(spiflash_sendcmd(SPI_RD_STATUS, 0) & SPI_STATUS_WIP, 0); - spiflash_done(); - - bytes_left -= xact_len; - to += xact_len; - buf += xact_len; - - *retlen += xact_len; - } while (bytes_left != 0); - - return 0; -} - - -#ifdef CONFIG_MTD_PARTITIONS -static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL }; -#endif - - -static int spiflash_probe(struct platform_device *pdev) -{ - int result = -1; - int index, num_parts; - struct mtd_info *mtd; - - spidata->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); - spin_lock_init(&spidata->mutex); - init_waitqueue_head(&spidata->wq); - spidata->state = FL_READY; - - if (!spidata->mmraddr) { - printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); - kfree(spidata); - spidata = NULL; - } - - mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); - if (!mtd) { - kfree(spidata); - return -ENXIO; - } - - if (!(index = spiflash_probe_chip())) { - printk (KERN_WARNING SPIFLASH "Found no serial flash device\n"); - goto error; - } - - spidata->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); - if (!spidata->readaddr) { - printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); - goto error; - } - - mtd->name = "spiflash"; - mtd->type = MTD_NORFLASH; - mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); - mtd->size = flashconfig_tbl[index].byte_cnt; - mtd->erasesize = flashconfig_tbl[index].sector_size; - mtd->writesize = 1; - mtd->numeraseregions = 0; - mtd->eraseregions = NULL; - mtd->erase = spiflash_erase; - mtd->read = spiflash_read; - mtd->write = spiflash_write; - mtd->owner = THIS_MODULE; - - /* parse redboot partitions */ - num_parts = parse_mtd_partitions(mtd, part_probe_types, &spidata->parsed_parts, 0); - if (!num_parts) - goto error; - - result = add_mtd_partitions(mtd, spidata->parsed_parts, num_parts); - spidata->mtd = mtd; - - return (result); - -error: - kfree(mtd); - kfree(spidata); - return -ENXIO; -} - -static int spiflash_remove (struct platform_device *pdev) -{ - del_mtd_partitions (spidata->mtd); - kfree(spidata->mtd); - return 0; -} - -struct platform_driver spiflash_driver = { - .driver.name = "spiflash", - .probe = spiflash_probe, - .remove = spiflash_remove, -}; - -int __init -spiflash_init (void) -{ - spidata = kmalloc(sizeof(struct spiflash_data), GFP_KERNEL); - if (!spidata) - return (-ENXIO); - - spin_lock_init(&spidata->mutex); - platform_driver_register(&spiflash_driver); - - return 0; -} - -void __exit -spiflash_exit (void) -{ - kfree(spidata); -} - -module_init (spiflash_init); -module_exit (spiflash_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc"); -MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); - diff --git a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h b/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h deleted file mode 100644 index 2553c6f50f..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/mtd/devices/spiflash.h +++ /dev/null @@ -1,120 +0,0 @@ -/* - * SPI Flash Memory support header file. - * - * $Id: //depot/sw/releases/linuxsrc/src/kernels/mips-linux-2.4.25/drivers/mtd/devices/spiflash.h#3 $ - * - * - * Copyright (c) 2005, Atheros Communications Inc. - * Copyright (C) 2006 FON Technology, SL. - * Copyright (C) 2006 Imre Kaloz - * - * This code is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ -#define FLASH_1MB 1 -#define FLASH_2MB 2 -#define FLASH_4MB 3 -#define FLASH_8MB 4 -#define FLASH_16MB 5 -#define MAX_FLASH 6 - -#define STM_PAGE_SIZE 256 - -#define SFI_WRITE_BUFFER_SIZE 4 -#define SFI_FLASH_ADDR_MASK 0x00ffffff - -#define STM_8MBIT_SIGNATURE 0x13 -#define STM_M25P80_BYTE_COUNT 1048576 -#define STM_M25P80_SECTOR_COUNT 16 -#define STM_M25P80_SECTOR_SIZE 0x10000 - -#define STM_16MBIT_SIGNATURE 0x14 -#define STM_M25P16_BYTE_COUNT 2097152 -#define STM_M25P16_SECTOR_COUNT 32 -#define STM_M25P16_SECTOR_SIZE 0x10000 - -#define STM_32MBIT_SIGNATURE 0x15 -#define STM_M25P32_BYTE_COUNT 4194304 -#define STM_M25P32_SECTOR_COUNT 64 -#define STM_M25P32_SECTOR_SIZE 0x10000 - -#define STM_64MBIT_SIGNATURE 0x16 -#define STM_M25P64_BYTE_COUNT 8388608 -#define STM_M25P64_SECTOR_COUNT 128 -#define STM_M25P64_SECTOR_SIZE 0x10000 - -#define STM_128MBIT_SIGNATURE 0x17 -#define STM_M25P128_BYTE_COUNT 16777216 -#define STM_M25P128_SECTOR_COUNT 256 -#define STM_M25P128_SECTOR_SIZE 0x10000 - -#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT -#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT -#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE -#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT -#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT -#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE -#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT -#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT -#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE -#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT -#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT -#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE -#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT -#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT -#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE - -/* - * ST Microelectronics Opcodes for Serial Flash - */ - -#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ -#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ -#define STM_OP_RD_STATUS 0x05 /* Read Status */ -#define STM_OP_WR_STATUS 0x01 /* Write Status */ -#define STM_OP_RD_DATA 0x03 /* Read Data */ -#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ -#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ -#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ -#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ -#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ -#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ - -#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ -#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ -#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ -#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ -#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ -#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ - -/* - * SPI Flash Interface Registers - */ -#define AR531XPLUS_SPI_READ 0x08000000 -#define AR531XPLUS_SPI_MMR 0x11300000 -#define AR531XPLUS_SPI_MMR_SIZE 12 - -#define AR531XPLUS_SPI_CTL 0x00 -#define AR531XPLUS_SPI_OPCODE 0x04 -#define AR531XPLUS_SPI_DATA 0x08 - -#define SPI_FLASH_READ AR531XPLUS_SPI_READ -#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR -#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE -#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL -#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE -#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA - -#define SPI_CTL_START 0x00000100 -#define SPI_CTL_BUSY 0x00010000 -#define SPI_CTL_TXCNT_MASK 0x0000000f -#define SPI_CTL_RXCNT_MASK 0x000000f0 -#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff -#define SPI_CTL_SIZE_MASK 0x00060000 - -#define SPI_CTL_CLK_SEL_MASK 0x03000000 -#define SPI_OPCODE_MASK 0x000000ff - -#define SPI_STATUS_WIP STM_STATUS_WIP diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile deleted file mode 100644 index 9eb63e46b6..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the AR2313 ethernet driver -# - -obj-$(CONFIG_AR2313) += ar2313.o diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c deleted file mode 100644 index 727d190b37..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.c +++ /dev/null @@ -1,1409 +0,0 @@ -/* - * ar2313.c: Linux driver for the Atheros AR231x Ethernet device. - * - * Copyright (C) 2004 by Sameer Dekate - * Copyright (C) 2006 Imre Kaloz - * Copyright (C) 2006-2007 Felix Fietkau - * - * Thanks to Atheros for providing hardware and documentation - * enabling me to write this driver. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Additional credits: - * This code is taken from John Taylor's Sibyte driver and then - * modified for the AR2313. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include -#include - -#define AR2313_MTU 1692 -#define AR2313_PRIOS 1 -#define AR2313_QUEUES (2*AR2313_PRIOS) -#define AR2313_DESCR_ENTRIES 64 - -#undef INDEX_DEBUG -#define DEBUG 0 -#define DEBUG_TX 0 -#define DEBUG_RX 0 -#define DEBUG_INT 0 -#define DEBUG_MC 0 -#define DEBUG_ERR 1 - -#ifndef min -#define min(a,b) (((a)<(b))?(a):(b)) -#endif - -#ifndef SMP_CACHE_BYTES -#define SMP_CACHE_BYTES L1_CACHE_BYTES -#endif - -#define AR2313_MBOX_SET_BIT 0x8 - -#define BOARD_IDX_STATIC 0 -#define BOARD_IDX_OVERFLOW -1 - -#include "dma.h" -#include "ar2313.h" - -/* - * New interrupt handler strategy: - * - * An old interrupt handler worked using the traditional method of - * replacing an skbuff with a new one when a packet arrives. However - * the rx rings do not need to contain a static number of buffer - * descriptors, thus it makes sense to move the memory allocation out - * of the main interrupt handler and do it in a bottom half handler - * and only allocate new buffers when the number of buffers in the - * ring is below a certain threshold. In order to avoid starving the - * NIC under heavy load it is however necessary to force allocation - * when hitting a minimum threshold. The strategy for alloction is as - * follows: - * - * RX_LOW_BUF_THRES - allocate buffers in the bottom half - * RX_PANIC_LOW_THRES - we are very low on buffers, allocate - * the buffers in the interrupt handler - * RX_RING_THRES - maximum number of buffers in the rx ring - * - * One advantagous side effect of this allocation approach is that the - * entire rx processing can be done without holding any spin lock - * since the rx rings and registers are totally independent of the tx - * ring and its registers. This of course includes the kmalloc's of - * new skb's. Thus start_xmit can run in parallel with rx processing - * and the memory allocation on SMP systems. - * - * Note that running the skb reallocation in a bottom half opens up - * another can of races which needs to be handled properly. In - * particular it can happen that the interrupt handler tries to run - * the reallocation while the bottom half is either running on another - * CPU or was interrupted on the same CPU. To get around this the - * driver uses bitops to prevent the reallocation routines from being - * reentered. - * - * TX handling can also be done without holding any spin lock, wheee - * this is fun! since tx_csm is only written to by the interrupt - * handler. - */ - -/* - * Threshold values for RX buffer allocation - the low water marks for - * when to start refilling the rings are set to 75% of the ring - * sizes. It seems to make sense to refill the rings entirely from the - * intrrupt handler once it gets below the panic threshold, that way - * we don't risk that the refilling is moved to another CPU when the - * one running the interrupt handler just got the slab code hot in its - * cache. - */ -#define RX_RING_SIZE AR2313_DESCR_ENTRIES -#define RX_PANIC_THRES (RX_RING_SIZE/4) -#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) -#define CRC_LEN 4 -#define RX_OFFSET 2 - -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -#define VLAN_HDR 4 -#else -#define VLAN_HDR 0 -#endif - -#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET) - -#ifdef MODULE -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sameer Dekate , Imre Kaloz , Felix Fietkau "); -MODULE_DESCRIPTION("AR2313 Ethernet driver"); -#endif - -#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) - -// prototypes -#ifdef TX_TIMEOUT -static void ar2313_tx_timeout(struct net_device *dev); -#endif -static void ar2313_halt(struct net_device *dev); -static void rx_tasklet_func(unsigned long data); -static void rx_tasklet_cleanup(struct net_device *dev); -static void ar2313_multicast_list(struct net_device *dev); - -static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); -static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); -static int mdiobus_reset(struct mii_bus *bus); -static int mdiobus_probe (struct net_device *dev); -static void ar2313_adjust_link(struct net_device *dev); - -#ifndef ERR -#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) -#endif - - -int __init ar2313_probe(struct platform_device *pdev) -{ - struct net_device *dev; - struct ar2313_private *sp; - struct resource *res; - unsigned long ar_eth_base; - char buf[64]; - - dev = alloc_etherdev(sizeof(struct ar2313_private)); - - if (dev == NULL) { - printk(KERN_ERR - "ar2313: Unable to allocate net_device structure!\n"); - return -ENOMEM; - } - - platform_set_drvdata(pdev, dev); - - sp = netdev_priv(dev); - sp->dev = dev; - sp->cfg = pdev->dev.platform_data; - - sprintf(buf, "eth%d_membase", pdev->id); - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); - if (!res) - return -ENODEV; - - sp->link = 0; - ar_eth_base = res->start; - sp->phy = sp->cfg->phy; - - sprintf(buf, "eth%d_irq", pdev->id); - dev->irq = platform_get_irq_byname(pdev, buf); - - spin_lock_init(&sp->lock); - - /* initialize func pointers */ - dev->open = &ar2313_open; - dev->stop = &ar2313_close; - dev->hard_start_xmit = &ar2313_start_xmit; - - dev->set_multicast_list = &ar2313_multicast_list; -#ifdef TX_TIMEOUT - dev->tx_timeout = ar2313_tx_timeout; - dev->watchdog_timeo = AR2313_TX_TIMEOUT; -#endif - dev->do_ioctl = &ar2313_ioctl; - - // SAMEER: do we need this? - dev->features |= NETIF_F_HIGHDMA; - - tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev); - tasklet_disable(&sp->rx_tasklet); - - sp->eth_regs = - ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs)); - if (!sp->eth_regs) { - printk("Can't remap eth registers\n"); - return (-ENXIO); - } - - /* - * When there's only one MAC, PHY regs are typically on ENET0, - * even though the MAC might be on ENET1. - * Needto remap PHY regs separately in this case - */ - if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs)) - sp->phy_regs = sp->eth_regs; - else { - sp->phy_regs = - ioremap_nocache(virt_to_phys(sp->cfg->phy_base), - sizeof(*sp->phy_regs)); - if (!sp->phy_regs) { - printk("Can't remap phy registers\n"); - return (-ENXIO); - } - } - - sp->dma_regs = - ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000), - sizeof(*sp->dma_regs)); - dev->base_addr = (unsigned int) sp->dma_regs; - if (!sp->dma_regs) { - printk("Can't remap DMA registers\n"); - return (-ENXIO); - } - - sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4); - if (!sp->int_regs) { - printk("Can't remap INTERRUPT registers\n"); - return (-ENXIO); - } - - strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); - sp->name[sizeof(sp->name) - 1] = '\0'; - memcpy(dev->dev_addr, sp->cfg->macaddr, 6); - sp->board_idx = BOARD_IDX_STATIC; - - if (ar2313_init(dev)) { - /* - * ar2313_init() calls ar2313_init_cleanup() on error. - */ - kfree(dev); - return -ENODEV; - } - - if (register_netdev(dev)) { - printk("%s: register_netdev failed\n", __func__); - return -1; - } - - printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n", - dev->name, sp->name, - dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], - dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq); - - sp->mii_bus.priv = dev; - sp->mii_bus.read = mdiobus_read; - sp->mii_bus.write = mdiobus_write; - sp->mii_bus.reset = mdiobus_reset; - sp->mii_bus.name = "ar2313_eth_mii"; - sp->mii_bus.id = 0; - sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); - *sp->mii_bus.irq = PHY_POLL; - - mdiobus_register(&sp->mii_bus); - - if (mdiobus_probe(dev) != 0) { - printk(KERN_ERR "ar2313: mdiobus_probe failed"); - rx_tasklet_cleanup(dev); - ar2313_init_cleanup(dev); - unregister_netdev(dev); - kfree(dev); - } else { - /* start link poll timer */ - ar2313_setup_timer(dev); - } - - return 0; -} - -#if 0 -static void ar2313_dump_regs(struct net_device *dev) -{ - unsigned int *ptr, i; - struct ar2313_private *sp = netdev_priv(dev); - - ptr = (unsigned int *) sp->eth_regs; - for (i = 0; i < (sizeof(ETHERNET_STRUCT) / sizeof(unsigned int)); - i++, ptr++) { - printk("ENET: %08x = %08x\n", (int) ptr, *ptr); - } - - ptr = (unsigned int *) sp->dma_regs; - for (i = 0; i < (sizeof(DMA) / sizeof(unsigned int)); i++, ptr++) { - printk("DMA: %08x = %08x\n", (int) ptr, *ptr); - } - - ptr = (unsigned int *) sp->int_regs; - for (i = 0; i < (sizeof(INTERRUPT) / sizeof(unsigned int)); i++, ptr++) { - printk("INT: %08x = %08x\n", (int) ptr, *ptr); - } - - for (i = 0; i < AR2313_DESCR_ENTRIES; i++) { - ar2313_descr_t *td = &sp->tx_ring[i]; - printk("Tx desc %2d: %08x %08x %08x %08x\n", i, - td->status, td->devcs, td->addr, td->descr); - } -} -#endif - -#ifdef TX_TIMEOUT -static void ar2313_tx_timeout(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - unsigned long flags; - -#if DEBUG_TX - printk("Tx timeout\n"); -#endif - spin_lock_irqsave(&sp->lock, flags); - ar2313_restart(dev); - spin_unlock_irqrestore(&sp->lock, flags); -} -#endif - -#if DEBUG_MC -static void printMcList(struct net_device *dev) -{ - struct dev_mc_list *list = dev->mc_list; - int num = 0, i; - while (list) { - printk("%d MC ADDR ", num); - for (i = 0; i < list->dmi_addrlen; i++) { - printk(":%02x", list->dmi_addr[i]); - } - list = list->next; - printk("\n"); - } -} -#endif - -/* - * Set or clear the multicast filter for this adaptor. - * THIS IS ABSOLUTE CRAP, disabled - */ -static void ar2313_multicast_list(struct net_device *dev) -{ - /* - * Always listen to broadcasts and - * treat IFF bits independently - */ - struct ar2313_private *sp = netdev_priv(dev); - unsigned int recognise; - - recognise = sp->eth_regs->mac_control; - - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - recognise |= MAC_CONTROL_PR; - } else { - recognise &= ~MAC_CONTROL_PR; - } - - if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) { -#if DEBUG_MC - printMcList(dev); - printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, - dev->mc_count); -#endif - recognise |= MAC_CONTROL_PM; /* all multicast */ - } else if (dev->mc_count > 0) { -#if DEBUG_MC - printMcList(dev); - printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count); -#endif - recognise |= MAC_CONTROL_PM; /* for the time being */ - } -#if DEBUG_MC - printk("%s: setting %08x to %08x\n", __FUNCTION__, (int) sp->eth_regs, - recognise); -#endif - - sp->eth_regs->mac_control = recognise; -} - -static void rx_tasklet_cleanup(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - - /* - * Tasklet may be scheduled. Need to get it removed from the list - * since we're about to free the struct. - */ - - sp->unloading = 1; - tasklet_enable(&sp->rx_tasklet); - tasklet_kill(&sp->rx_tasklet); -} - -static int __exit ar2313_remove(struct platform_device *pdev) -{ - struct net_device *dev = platform_get_drvdata(pdev); - rx_tasklet_cleanup(dev); - ar2313_init_cleanup(dev); - unregister_netdev(dev); - kfree(dev); - return 0; -} - - -/* - * Restart the AR2313 ethernet controller. - */ -static int ar2313_restart(struct net_device *dev) -{ - /* disable interrupts */ - disable_irq(dev->irq); - - /* stop mac */ - ar2313_halt(dev); - - /* initialize */ - ar2313_init(dev); - - /* enable interrupts */ - enable_irq(dev->irq); - - return 0; -} - -static struct platform_driver ar2313_driver = { - .driver.name = "ar531x-eth", - .probe = ar2313_probe, - .remove = ar2313_remove, -}; - -int __init ar2313_module_init(void) -{ - return platform_driver_register(&ar2313_driver); -} - -void __exit ar2313_module_cleanup(void) -{ - platform_driver_unregister(&ar2313_driver); -} - -module_init(ar2313_module_init); -module_exit(ar2313_module_cleanup); - - -static void ar2313_free_descriptors(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - if (sp->rx_ring != NULL) { - kfree((void *) KSEG0ADDR(sp->rx_ring)); - sp->rx_ring = NULL; - sp->tx_ring = NULL; - } -} - - -static int ar2313_allocate_descriptors(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - int size; - int j; - ar2313_descr_t *space; - - if (sp->rx_ring != NULL) { - printk("%s: already done.\n", __FUNCTION__); - return 0; - } - - size = - (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES)); - space = kmalloc(size, GFP_KERNEL); - if (space == NULL) - return 1; - - /* invalidate caches */ - dma_cache_inv((unsigned int) space, size); - - /* now convert pointer to KSEG1 */ - space = (ar2313_descr_t *) KSEG1ADDR(space); - - memset((void *) space, 0, size); - - sp->rx_ring = space; - space += AR2313_DESCR_ENTRIES; - - sp->tx_ring = space; - space += AR2313_DESCR_ENTRIES; - - /* Initialize the transmit Descriptors */ - for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { - ar2313_descr_t *td = &sp->tx_ring[j]; - td->status = 0; - td->devcs = DMA_TX1_CHAINED; - td->addr = 0; - td->descr = - virt_to_phys(&sp-> - tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]); - } - - return 0; -} - - -/* - * Generic cleanup handling data allocated during init. Used when the - * module is unloaded or if an error occurs during initialization - */ -static void ar2313_init_cleanup(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - struct sk_buff *skb; - int j; - - ar2313_free_descriptors(dev); - - if (sp->eth_regs) - iounmap((void *) sp->eth_regs); - if (sp->dma_regs) - iounmap((void *) sp->dma_regs); - - if (sp->rx_skb) { - for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { - skb = sp->rx_skb[j]; - if (skb) { - sp->rx_skb[j] = NULL; - dev_kfree_skb(skb); - } - } - kfree(sp->rx_skb); - sp->rx_skb = NULL; - } - - if (sp->tx_skb) { - for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { - skb = sp->tx_skb[j]; - if (skb) { - sp->tx_skb[j] = NULL; - dev_kfree_skb(skb); - } - } - kfree(sp->tx_skb); - sp->tx_skb = NULL; - } -} - -static int ar2313_setup_timer(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - - init_timer(&sp->link_timer); - - sp->link_timer.function = ar2313_link_timer_fn; - sp->link_timer.data = (int) dev; - sp->link_timer.expires = jiffies + HZ; - - add_timer(&sp->link_timer); - return 0; - -} - -static void ar2313_link_timer_fn(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct ar2313_private *sp = netdev_priv(dev); - - // see if the link status changed - // This was needed to make sure we set the PHY to the - // autonegotiated value of half or full duplex. - ar2313_check_link(dev); - - // Loop faster when we don't have link. - // This was needed to speed up the AP bootstrap time. - if (sp->link == 0) { - mod_timer(&sp->link_timer, jiffies + HZ / 2); - } else { - mod_timer(&sp->link_timer, jiffies + LINK_TIMER); - } -} - -static void ar2313_check_link(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - u16 phyData; - - phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR); - if (sp->phyData != phyData) { - if (phyData & BMSR_LSTATUS) { - /* link is present, ready link partner ability to deterine - duplexity */ - int duplex = 0; - u16 reg; - - sp->link = 1; - reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR); - if (reg & BMCR_ANENABLE) { - /* auto neg enabled */ - reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA); - duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0; - } else { - /* no auto neg, just read duplex config */ - duplex = (reg & BMCR_FULLDPLX) ? 1 : 0; - } - - printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", - dev->name, (duplex) ? "full" : "half"); - - if (duplex) { - /* full duplex */ - sp->eth_regs->mac_control = - ((sp->eth_regs-> - mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO); - } else { - /* half duplex */ - sp->eth_regs->mac_control = - ((sp->eth_regs-> - mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F); - } - } else { - /* no link */ - sp->link = 0; - } - sp->phyData = phyData; - } -} - -static int ar2313_reset_reg(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - unsigned int ethsal, ethsah; - unsigned int flags; - - *sp->int_regs |= sp->cfg->reset_mac; - mdelay(10); - *sp->int_regs &= ~sp->cfg->reset_mac; - mdelay(10); - *sp->int_regs |= sp->cfg->reset_phy; - mdelay(10); - *sp->int_regs &= ~sp->cfg->reset_phy; - mdelay(10); - - sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); - mdelay(10); - sp->dma_regs->bus_mode = - ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); - - /* enable interrupts */ - sp->dma_regs->intr_ena = (DMA_STATUS_AIS | - DMA_STATUS_NIS | - DMA_STATUS_RI | - DMA_STATUS_TI | DMA_STATUS_FBE); - sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); - sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); - sp->dma_regs->control = - (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); - - sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); - sp->eth_regs->vlan_tag = (0x8100); - - /* Enable Ethernet Interface */ - flags = (MAC_CONTROL_TE | /* transmit enable */ - MAC_CONTROL_PM | /* pass mcast */ - MAC_CONTROL_F | /* full duplex */ - MAC_CONTROL_HBD); /* heart beat disabled */ - - if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ - flags |= MAC_CONTROL_PR; - } - sp->eth_regs->mac_control = flags; - - /* Set all Ethernet station address registers to their initial values */ - ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | - (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); - - ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | - (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | - (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | - (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); - - sp->eth_regs->mac_addr[0] = ethsah; - sp->eth_regs->mac_addr[1] = ethsal; - - mdelay(10); - - return (0); -} - - -static int ar2313_init(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - int ecode = 0; - - /* - * Allocate descriptors - */ - if (ar2313_allocate_descriptors(dev)) { - printk("%s: %s: ar2313_allocate_descriptors failed\n", - dev->name, __FUNCTION__); - ecode = -EAGAIN; - goto init_error; - } - - /* - * Get the memory for the skb rings. - */ - if (sp->rx_skb == NULL) { - sp->rx_skb = - kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, - GFP_KERNEL); - if (!(sp->rx_skb)) { - printk("%s: %s: rx_skb kmalloc failed\n", - dev->name, __FUNCTION__); - ecode = -EAGAIN; - goto init_error; - } - } - memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); - - if (sp->tx_skb == NULL) { - sp->tx_skb = - kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, - GFP_KERNEL); - if (!(sp->tx_skb)) { - printk("%s: %s: tx_skb kmalloc failed\n", - dev->name, __FUNCTION__); - ecode = -EAGAIN; - goto init_error; - } - } - memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); - - /* - * Set tx_csm before we start receiving interrupts, otherwise - * the interrupt handler might think it is supposed to process - * tx ints before we are up and running, which may cause a null - * pointer access in the int handler. - */ - sp->rx_skbprd = 0; - sp->cur_rx = 0; - sp->tx_prd = 0; - sp->tx_csm = 0; - - /* - * Zero the stats before starting the interface - */ - memset(&dev->stats, 0, sizeof(dev->stats)); - - /* - * We load the ring here as there seem to be no way to tell the - * firmware to wipe the ring without re-initializing it. - */ - ar2313_load_rx_ring(dev, RX_RING_SIZE); - - /* - * Init hardware - */ - ar2313_reset_reg(dev); - - /* - * Get the IRQ - */ - ecode = - request_irq(dev->irq, &ar2313_interrupt, - IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, - dev->name, dev); - if (ecode) { - printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", - dev->name, __FUNCTION__, dev->irq); - goto init_error; - } - - - tasklet_enable(&sp->rx_tasklet); - - return 0; - - init_error: - ar2313_init_cleanup(dev); - return ecode; -} - -/* - * Load the rx ring. - * - * Loading rings is safe without holding the spin lock since this is - * done only before the device is enabled, thus no interrupts are - * generated and by the interrupt handler/tasklet handler. - */ -static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs) -{ - - struct ar2313_private *sp = netdev_priv(dev); - short i, idx; - - idx = sp->rx_skbprd; - - for (i = 0; i < nr_bufs; i++) { - struct sk_buff *skb; - ar2313_descr_t *rd; - - if (sp->rx_skb[idx]) { -#if DEBUG_RX - printk(KERN_INFO "ar2313 rx refill full\n"); -#endif /* DEBUG */ - break; - } - // partha: create additional room for the second GRE fragment - skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC); - if (!skb) { - printk("\n\n\n\n %s: No memory in system\n\n\n\n", - __FUNCTION__); - break; - } - // partha: create additional room in the front for tx pkt capture - skb_reserve(skb, 32); - - /* - * Make sure IP header starts on a fresh cache line. - */ - skb->dev = dev; - skb_reserve(skb, RX_OFFSET); - sp->rx_skb[idx] = skb; - - rd = (ar2313_descr_t *) & sp->rx_ring[idx]; - - /* initialize dma descriptor */ - rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | - DMA_RX1_CHAINED); - rd->addr = virt_to_phys(skb->data); - rd->descr = - virt_to_phys(&sp-> - rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]); - rd->status = DMA_RX_OWN; - - idx = DSC_NEXT(idx); - } - - if (!i) { -#if DEBUG_ERR - printk(KERN_INFO - "Out of memory when allocating standard receive buffers\n"); -#endif /* DEBUG */ - } else { - sp->rx_skbprd = idx; - } - - return; -} - -#define AR2313_MAX_PKTS_PER_CALL 64 - -static int ar2313_rx_int(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - struct sk_buff *skb, *skb_new; - ar2313_descr_t *rxdesc; - unsigned int status; - u32 idx; - int pkts = 0; - int rval; - - idx = sp->cur_rx; - - /* process at most the entire ring and then wait for another interrupt - */ - while (1) { - - rxdesc = &sp->rx_ring[idx]; - status = rxdesc->status; - if (status & DMA_RX_OWN) { - /* SiByte owns descriptor or descr not yet filled in */ - rval = 0; - break; - } - - if (++pkts > AR2313_MAX_PKTS_PER_CALL) { - rval = 1; - break; - } -#if DEBUG_RX - printk("index %d\n", idx); - printk("RX status %08x\n", rxdesc->status); - printk("RX devcs %08x\n", rxdesc->devcs); - printk("RX addr %08x\n", rxdesc->addr); - printk("RX descr %08x\n", rxdesc->descr); -#endif - - if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) && - (!(status & DMA_RX_LONG))) { -#if DEBUG_RX - printk("%s: rx ERROR %08x\n", __FUNCTION__, status); -#endif - dev->stats.rx_errors++; - dev->stats.rx_dropped++; - - /* add statistics counters */ - if (status & DMA_RX_ERR_CRC) - dev->stats.rx_crc_errors++; - if (status & DMA_RX_ERR_COL) - dev->stats.rx_over_errors++; - if (status & DMA_RX_ERR_LENGTH) - dev->stats.rx_length_errors++; - if (status & DMA_RX_ERR_RUNT) - dev->stats.rx_over_errors++; - if (status & DMA_RX_ERR_DESC) - dev->stats.rx_over_errors++; - - } else { - /* alloc new buffer. */ - skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128); - if (skb_new != NULL) { - - skb = sp->rx_skb[idx]; - /* set skb */ - skb_put(skb, - ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); - - dev->stats.rx_bytes += skb->len; - skb->protocol = eth_type_trans(skb, dev); - /* pass the packet to upper layers */ - netif_rx(skb); - - skb_new->dev = dev; - /* 16 bit align */ - skb_reserve(skb_new, RX_OFFSET + 32); - /* reset descriptor's curr_addr */ - rxdesc->addr = virt_to_phys(skb_new->data); - - dev->stats.rx_packets++; - sp->rx_skb[idx] = skb_new; - } else { - dev->stats.rx_dropped++; - } - } - - rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | - DMA_RX1_CHAINED); - rxdesc->status = DMA_RX_OWN; - - idx = DSC_NEXT(idx); - } - - sp->cur_rx = idx; - - return rval; -} - - -static void ar2313_tx_int(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - u32 idx; - struct sk_buff *skb; - ar2313_descr_t *txdesc; - unsigned int status = 0; - - idx = sp->tx_csm; - - while (idx != sp->tx_prd) { - - txdesc = &sp->tx_ring[idx]; - -#if DEBUG_TX - printk - ("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n", - dev->name, sp->tx_csm, idx, sp->tx_prd, txdesc->status, - txdesc->devcs, txdesc->addr, txdesc->descr); -#endif /* DEBUG */ - - if ((status = txdesc->status) & DMA_TX_OWN) { - /* ar2313 dma still owns descr */ - break; - } - /* done with this descriptor */ - dma_unmap_single(NULL, txdesc->addr, - txdesc->devcs & DMA_TX1_BSIZE_MASK, - DMA_TO_DEVICE); - txdesc->status = 0; - - if (status & DMA_TX_ERROR) { - dev->stats.tx_errors++; - dev->stats.tx_dropped++; - if (status & DMA_TX_ERR_UNDER) - dev->stats.tx_fifo_errors++; - if (status & DMA_TX_ERR_HB) - dev->stats.tx_heartbeat_errors++; - if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) - dev->stats.tx_carrier_errors++; - if (status & (DMA_TX_ERR_LATE | - DMA_TX_ERR_COL | - DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) - dev->stats.tx_aborted_errors++; - } else { - /* transmit OK */ - dev->stats.tx_packets++; - } - - skb = sp->tx_skb[idx]; - sp->tx_skb[idx] = NULL; - idx = DSC_NEXT(idx); - dev->stats.tx_bytes += skb->len; - dev_kfree_skb_irq(skb); - } - - sp->tx_csm = idx; - - return; -} - - -static void rx_tasklet_func(unsigned long data) -{ - struct net_device *dev = (struct net_device *) data; - struct ar2313_private *sp = netdev_priv(dev); - - if (sp->unloading) { - return; - } - - if (ar2313_rx_int(dev)) { - tasklet_hi_schedule(&sp->rx_tasklet); - } else { - unsigned long flags; - spin_lock_irqsave(&sp->lock, flags); - sp->dma_regs->intr_ena |= DMA_STATUS_RI; - spin_unlock_irqrestore(&sp->lock, flags); - } -} - -static void rx_schedule(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - - sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; - - tasklet_hi_schedule(&sp->rx_tasklet); -} - -static irqreturn_t ar2313_interrupt(int irq, void *dev_id) -{ - struct net_device *dev = (struct net_device *) dev_id; - struct ar2313_private *sp = netdev_priv(dev); - unsigned int status, enabled; - - /* clear interrupt */ - /* - * Don't clear RI bit if currently disabled. - */ - status = sp->dma_regs->status; - enabled = sp->dma_regs->intr_ena; - sp->dma_regs->status = status & enabled; - - if (status & DMA_STATUS_NIS) { - /* normal status */ - /* - * Don't schedule rx processing if interrupt - * is already disabled. - */ - if (status & enabled & DMA_STATUS_RI) { - /* receive interrupt */ - rx_schedule(dev); - } - if (status & DMA_STATUS_TI) { - /* transmit interrupt */ - ar2313_tx_int(dev); - } - } - - if (status & DMA_STATUS_AIS) { -#if DEBUG_INT - printk("%s: AIS set %08x & %x\n", __FUNCTION__, - status, (DMA_STATUS_FBE | DMA_STATUS_TPS)); -#endif - /* abnormal status */ - if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) { - ar2313_restart(dev); - } - } - return IRQ_HANDLED; -} - - -static int ar2313_open(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - unsigned int ethsal, ethsah; - - /* reset the hardware, in case the MAC address changed */ - ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | - (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); - - ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | - (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | - (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | - (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); - - sp->eth_regs->mac_addr[0] = ethsah; - sp->eth_regs->mac_addr[1] = ethsal; - - mdelay(10); - - dev->mtu = 1500; - netif_start_queue(dev); - - sp->eth_regs->mac_control |= MAC_CONTROL_RE; - - return 0; -} - -static void ar2313_halt(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - int j; - - tasklet_disable(&sp->rx_tasklet); - - /* kill the MAC */ - sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ - MAC_CONTROL_TE); /* disable Transmits */ - /* stop dma */ - sp->dma_regs->control = 0; - sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; - - /* place phy and MAC in reset */ - *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy); - - /* free buffers on tx ring */ - for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { - struct sk_buff *skb; - ar2313_descr_t *txdesc; - - txdesc = &sp->tx_ring[j]; - txdesc->descr = 0; - - skb = sp->tx_skb[j]; - if (skb) { - dev_kfree_skb(skb); - sp->tx_skb[j] = NULL; - } - } -} - -/* - * close should do nothing. Here's why. It's called when - * 'ifconfig bond0 down' is run. If it calls free_irq then - * the irq is gone forever ! When bond0 is made 'up' again, - * the ar2313_open () does not call request_irq (). Worse, - * the call to ar2313_halt() generates a WDOG reset due to - * the write to 'sp->int_regs' and the box reboots. - * Commenting this out is good since it allows the - * system to resume when bond0 is made up again. - */ -static int ar2313_close(struct net_device *dev) -{ -#if 0 - /* - * Disable interrupts - */ - disable_irq(dev->irq); - - /* - * Without (or before) releasing irq and stopping hardware, this - * is an absolute non-sense, by the way. It will be reset instantly - * by the first irq. - */ - netif_stop_queue(dev); - - /* stop the MAC and DMA engines */ - ar2313_halt(dev); - - /* release the interrupt */ - free_irq(dev->irq, dev); - -#endif - return 0; -} - -static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - ar2313_descr_t *td; - u32 idx; - - idx = sp->tx_prd; - td = &sp->tx_ring[idx]; - - if (td->status & DMA_TX_OWN) { -#if DEBUG_TX - printk("%s: No space left to Tx\n", __FUNCTION__); -#endif - /* free skbuf and lie to the caller that we sent it out */ - dev->stats.tx_dropped++; - dev_kfree_skb(skb); - - /* restart transmitter in case locked */ - sp->dma_regs->xmt_poll = 0; - return 0; - } - - /* Setup the transmit descriptor. */ - td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | - (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); - td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); - td->status = DMA_TX_OWN; - - /* kick transmitter last */ - sp->dma_regs->xmt_poll = 0; - -#if DEBUG_TX - printk("index %d\n", idx); - printk("TX status %08x\n", td->status); - printk("TX devcs %08x\n", td->devcs); - printk("TX addr %08x\n", td->addr); - printk("TX descr %08x\n", td->descr); -#endif - - sp->tx_skb[idx] = skb; - idx = DSC_NEXT(idx); - sp->tx_prd = idx; - - return 0; -} - -static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) -{ - struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data; - struct ar2313_private *sp = netdev_priv(dev); - int ret; - - switch (cmd) { - - case SIOCETHTOOL: - spin_lock_irq(&sp->lock); - ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data); - spin_unlock_irq(&sp->lock); - return ret; - - case SIOCSIFHWADDR: - if (copy_from_user - (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGIFHWADDR: - if (copy_to_user - (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) - return -EFAULT; - return 0; - - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return phy_mii_ioctl(sp->phy_dev, data, cmd); - - default: - break; - } - - return -EOPNOTSUPP; -} - -static void ar2313_adjust_link(struct net_device *dev) -{ - struct ar2313_private *sp = netdev_priv(dev); - unsigned int mc; - - if (!sp->phy_dev->link) - return; - - if (sp->phy_dev->duplex != sp->oldduplex) { - mc = readl(&sp->eth_regs->mac_control); - mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO); - if (sp->phy_dev->duplex) - mc |= MAC_CONTROL_F; - else - mc |= MAC_CONTROL_DRO; - writel(mc, &sp->eth_regs->mac_control); - sp->oldduplex = sp->phy_dev->duplex; - } -} - -#define MII_ADDR(phy, reg) \ - ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) - -static int -mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) -{ - struct net_device *const dev = bus->priv; - struct ar2313_private *sp = netdev_priv(dev); - volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; - - ethernet->mii_addr = MII_ADDR(phy_addr, regnum); - while (ethernet->mii_addr & MII_ADDR_BUSY); - return (ethernet->mii_data >> MII_DATA_SHIFT); -} - -static int -mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, - u16 value) -{ - struct net_device *const dev = bus->priv; - struct ar2313_private *sp = netdev_priv(dev); - volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; - - while (ethernet->mii_addr & MII_ADDR_BUSY); - ethernet->mii_data = value << MII_DATA_SHIFT; - ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; - - return 0; -} - -static int mdiobus_reset(struct mii_bus *bus) -{ - struct net_device *const dev = bus->priv; - - ar2313_reset_reg(dev); - - return 0; -} - -static int mdiobus_probe (struct net_device *dev) -{ - struct ar2313_private *const sp = netdev_priv(dev); - struct phy_device *phydev = NULL; - int phy_addr; - - /* find the first (lowest address) PHY on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (sp->mii_bus.phy_map[phy_addr]) { - phydev = sp->mii_bus.phy_map[phy_addr]; - break; /* break out with first one found */ - } - - if (!phydev) { - printk (KERN_ERR "ar2313:%s: no PHY found\n", dev->name); - return -1; - } - - /* now we are supposed to have a proper phydev, to attach to... */ - BUG_ON(!phydev); - BUG_ON(phydev->attached_dev); - - phydev = phy_connect(dev, phydev->dev.bus_id, &ar2313_adjust_link, 0, - PHY_INTERFACE_MODE_MII); - - if (IS_ERR(phydev)) { - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); - return PTR_ERR(phydev); - } - - /* mask with MAC supported features */ - phydev->supported &= (SUPPORTED_10baseT_Half - | SUPPORTED_10baseT_Full - | SUPPORTED_100baseT_Half - | SUPPORTED_100baseT_Full - | SUPPORTED_Autoneg - /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ - | SUPPORTED_MII - | SUPPORTED_TP); - - phydev->advertising = phydev->supported; - - sp->oldduplex = -1; - sp->phy_dev = phydev; - - printk(KERN_INFO "%s: attached PHY driver [%s] " - "(mii_bus:phy_addr=%s)\n", - dev->name, phydev->drv->name, phydev->dev.bus_id); - - return 0; -} - diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h deleted file mode 100644 index 9fa49caa79..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/ar2313.h +++ /dev/null @@ -1,195 +0,0 @@ -#ifndef _AR2313_H_ -#define _AR2313_H_ - -#include -#include -#include - -/* - * probe link timer - 5 secs - */ -#define LINK_TIMER (5*HZ) - -#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) -#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) -#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) - -#define AR2313_TX_TIMEOUT (HZ/4) - -/* - * Rings - */ -#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) -#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) - -static inline int tx_space(u32 csm, u32 prd) -{ - return (csm - prd - 1) & (AR2313_DESCR_ENTRIES - 1); -} - -#if MAX_SKB_FRAGS -#define TX_RESERVED (MAX_SKB_FRAGS+1) /* +1 for message header */ -#define tx_ring_full(csm, prd) (tx_space(csm, prd) <= TX_RESERVED) -#else -#define tx_ring_full 0 -#endif - -#define AR2313_MBGET 2 -#define AR2313_MBSET 3 -#define AR2313_PCI_RECONFIG 4 -#define AR2313_PCI_DUMP 5 -#define AR2313_TEST_PANIC 6 -#define AR2313_TEST_NULLPTR 7 -#define AR2313_READ_DATA 8 -#define AR2313_WRITE_DATA 9 -#define AR2313_GET_VERSION 10 -#define AR2313_TEST_HANG 11 -#define AR2313_SYNC 12 - - -// -// New Combo structure for Both Eth0 AND eth1 -// -typedef struct { - volatile unsigned int mac_control; /* 0x00 */ - volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ - volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ - volatile unsigned int mii_addr; /* 0x14 */ - volatile unsigned int mii_data; /* 0x18 */ - volatile unsigned int flow_control; /* 0x1c */ - volatile unsigned int vlan_tag; /* 0x20 */ - volatile unsigned int pad[7]; /* 0x24 - 0x3c */ - volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ - -} ETHERNET_STRUCT; - -/******************************************************************** - * Interrupt controller - ********************************************************************/ - -typedef struct { - volatile unsigned int wdog_control; /* 0x08 */ - volatile unsigned int wdog_timer; /* 0x0c */ - volatile unsigned int misc_status; /* 0x10 */ - volatile unsigned int misc_mask; /* 0x14 */ - volatile unsigned int global_status; /* 0x18 */ - volatile unsigned int reserved; /* 0x1c */ - volatile unsigned int reset_control; /* 0x20 */ -} INTERRUPT; - -/******************************************************************** - * DMA controller - ********************************************************************/ -typedef struct { - volatile unsigned int bus_mode; /* 0x00 (CSR0) */ - volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ - volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ - volatile unsigned int rcv_base; /* 0x0c (CSR3) */ - volatile unsigned int xmt_base; /* 0x10 (CSR4) */ - volatile unsigned int status; /* 0x14 (CSR5) */ - volatile unsigned int control; /* 0x18 (CSR6) */ - volatile unsigned int intr_ena; /* 0x1c (CSR7) */ - volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ - volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ - volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ - volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ -} DMA; - -/* - * Struct private for the Sibyte. - * - * Elements are grouped so variables used by the tx handling goes - * together, and will go into the same cache lines etc. in order to - * avoid cache line contention between the rx and tx handling on SMP. - * - * Frequently accessed variables are put at the beginning of the - * struct to help the compiler generate better/shorter code. - */ -struct ar2313_private { - struct net_device *dev; - int version; - u32 mb[2]; - - volatile ETHERNET_STRUCT *phy_regs; - volatile ETHERNET_STRUCT *eth_regs; - volatile DMA *dma_regs; - volatile u32 *int_regs; - struct ar531x_eth *cfg; - - spinlock_t lock; /* Serialise access to device */ - - /* - * RX and TX descriptors, must be adjacent - */ - ar2313_descr_t *rx_ring; - ar2313_descr_t *tx_ring; - - - struct sk_buff **rx_skb; - struct sk_buff **tx_skb; - - /* - * RX elements - */ - u32 rx_skbprd; - u32 cur_rx; - - /* - * TX elements - */ - u32 tx_prd; - u32 tx_csm; - - /* - * Misc elements - */ - int board_idx; - char name[48]; - struct { - u32 address; - u32 length; - char *mapping; - } desc; - - - struct timer_list link_timer; - unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */ - unsigned short mac; - unsigned short link; /* 0 - link down, 1 - link up */ - u16 phyData; - - struct tasklet_struct rx_tasklet; - int unloading; - - struct phy_device *phy_dev; - struct mii_bus mii_bus; - int oldduplex; -}; - - -/* - * Prototypes - */ -static int ar2313_init(struct net_device *dev); -#ifdef TX_TIMEOUT -static void ar2313_tx_timeout(struct net_device *dev); -#endif -#if 0 -static void ar2313_multicast_list(struct net_device *dev); -#endif -static int ar2313_restart(struct net_device *dev); -#if DEBUG -static void ar2313_dump_regs(struct net_device *dev); -#endif -static void ar2313_load_rx_ring(struct net_device *dev, int bufs); -static irqreturn_t ar2313_interrupt(int irq, void *dev_id); -static int ar2313_open(struct net_device *dev); -static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev); -static int ar2313_close(struct net_device *dev); -static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, - int cmd); -static void ar2313_init_cleanup(struct net_device *dev); -static int ar2313_setup_timer(struct net_device *dev); -static void ar2313_link_timer_fn(unsigned long data); -static void ar2313_check_link(struct net_device *dev); -#endif /* _AR2313_H_ */ diff --git a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h b/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h deleted file mode 100644 index 6d478d21fe..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/net/ar2313/dma.h +++ /dev/null @@ -1,142 +0,0 @@ -#ifndef __ARUBA_DMA_H__ -#define __ARUBA_DMA_H__ - -/******************************************************************************* - * - * Copyright 2002 Integrated Device Technology, Inc. - * All rights reserved. - * - * DMA register definition. - * - * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $ - * - * Author : ryan.holmQVist@idt.com - * Date : 20011005 - * Update : - * $Log: dma.h,v $ - * Revision 1.3 2002/06/06 18:34:03 astichte - * Added XXX_PhysicalAddress and XXX_VirtualAddress - * - * Revision 1.2 2002/06/05 18:30:46 astichte - * Removed IDTField - * - * Revision 1.1 2002/05/29 17:33:21 sysarch - * jba File moved from vcode/include/idt/acacia - * - * - ******************************************************************************/ - -#define AR_BIT(x) (1 << (x)) -#define DMA_RX_ERR_CRC AR_BIT(1) -#define DMA_RX_ERR_DRIB AR_BIT(2) -#define DMA_RX_ERR_MII AR_BIT(3) -#define DMA_RX_EV2 AR_BIT(5) -#define DMA_RX_ERR_COL AR_BIT(6) -#define DMA_RX_LONG AR_BIT(7) -#define DMA_RX_LS AR_BIT(8) /* last descriptor */ -#define DMA_RX_FS AR_BIT(9) /* first descriptor */ -#define DMA_RX_MF AR_BIT(10) /* multicast frame */ -#define DMA_RX_ERR_RUNT AR_BIT(11) /* runt frame */ -#define DMA_RX_ERR_LENGTH AR_BIT(12) /* length error */ -#define DMA_RX_ERR_DESC AR_BIT(14) /* descriptor error */ -#define DMA_RX_ERROR AR_BIT(15) /* error summary */ -#define DMA_RX_LEN_MASK 0x3fff0000 -#define DMA_RX_LEN_SHIFT 16 -#define DMA_RX_FILT AR_BIT(30) -#define DMA_RX_OWN AR_BIT(31) /* desc owned by DMA controller */ - -#define DMA_RX1_BSIZE_MASK 0x000007ff -#define DMA_RX1_BSIZE_SHIFT 0 -#define DMA_RX1_CHAINED AR_BIT(24) -#define DMA_RX1_RER AR_BIT(25) - -#define DMA_TX_ERR_UNDER AR_BIT(1) /* underflow error */ -#define DMA_TX_ERR_DEFER AR_BIT(2) /* excessive deferral */ -#define DMA_TX_COL_MASK 0x78 -#define DMA_TX_COL_SHIFT 3 -#define DMA_TX_ERR_HB AR_BIT(7) /* hearbeat failure */ -#define DMA_TX_ERR_COL AR_BIT(8) /* excessive collisions */ -#define DMA_TX_ERR_LATE AR_BIT(9) /* late collision */ -#define DMA_TX_ERR_LINK AR_BIT(10) /* no carrier */ -#define DMA_TX_ERR_LOSS AR_BIT(11) /* loss of carrier */ -#define DMA_TX_ERR_JABBER AR_BIT(14) /* transmit jabber timeout */ -#define DMA_TX_ERROR AR_BIT(15) /* frame aborted */ -#define DMA_TX_OWN AR_BIT(31) /* descr owned by DMA controller */ - -#define DMA_TX1_BSIZE_MASK 0x000007ff -#define DMA_TX1_BSIZE_SHIFT 0 -#define DMA_TX1_CHAINED AR_BIT(24) /* chained descriptors */ -#define DMA_TX1_TER AR_BIT(25) /* transmit end of ring */ -#define DMA_TX1_FS AR_BIT(29) /* first segment */ -#define DMA_TX1_LS AR_BIT(30) /* last segment */ -#define DMA_TX1_IC AR_BIT(31) /* interrupt on completion */ - -#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ - -#define MAC_CONTROL_RE AR_BIT(2) /* receive enable */ -#define MAC_CONTROL_TE AR_BIT(3) /* transmit enable */ -#define MAC_CONTROL_DC AR_BIT(5) /* Deferral check */ -#define MAC_CONTROL_ASTP AR_BIT(8) /* Auto pad strip */ -#define MAC_CONTROL_DRTY AR_BIT(10) /* Disable retry */ -#define MAC_CONTROL_DBF AR_BIT(11) /* Disable bcast frames */ -#define MAC_CONTROL_LCC AR_BIT(12) /* late collision ctrl */ -#define MAC_CONTROL_HP AR_BIT(13) /* Hash Perfect filtering */ -#define MAC_CONTROL_HASH AR_BIT(14) /* Unicast hash filtering */ -#define MAC_CONTROL_HO AR_BIT(15) /* Hash only filtering */ -#define MAC_CONTROL_PB AR_BIT(16) /* Pass Bad frames */ -#define MAC_CONTROL_IF AR_BIT(17) /* Inverse filtering */ -#define MAC_CONTROL_PR AR_BIT(18) /* promiscuous mode (valid frames - only) */ -#define MAC_CONTROL_PM AR_BIT(19) /* pass multicast */ -#define MAC_CONTROL_F AR_BIT(20) /* full-duplex */ -#define MAC_CONTROL_DRO AR_BIT(23) /* Disable Receive Own */ -#define MAC_CONTROL_HBD AR_BIT(28) /* heart-beat disabled (MUST BE - SET) */ -#define MAC_CONTROL_BLE AR_BIT(30) /* big endian mode */ -#define MAC_CONTROL_RA AR_BIT(31) /* receive all (valid and invalid - frames) */ - -#define MII_ADDR_BUSY AR_BIT(0) -#define MII_ADDR_WRITE AR_BIT(1) -#define MII_ADDR_REG_SHIFT 6 -#define MII_ADDR_PHY_SHIFT 11 -#define MII_DATA_SHIFT 0 - -#define FLOW_CONTROL_FCE AR_BIT(1) - -#define DMA_BUS_MODE_SWR AR_BIT(0) /* software reset */ -#define DMA_BUS_MODE_BLE AR_BIT(7) /* big endian mode */ -#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ -#define DMA_BUS_MODE_DBO AR_BIT(20) /* big-endian descriptors */ - -#define DMA_STATUS_TI AR_BIT(0) /* transmit interrupt */ -#define DMA_STATUS_TPS AR_BIT(1) /* transmit process stopped */ -#define DMA_STATUS_TU AR_BIT(2) /* transmit buffer unavailable */ -#define DMA_STATUS_TJT AR_BIT(3) /* transmit buffer timeout */ -#define DMA_STATUS_UNF AR_BIT(5) /* transmit underflow */ -#define DMA_STATUS_RI AR_BIT(6) /* receive interrupt */ -#define DMA_STATUS_RU AR_BIT(7) /* receive buffer unavailable */ -#define DMA_STATUS_RPS AR_BIT(8) /* receive process stopped */ -#define DMA_STATUS_ETI AR_BIT(10) /* early transmit interrupt */ -#define DMA_STATUS_FBE AR_BIT(13) /* fatal bus interrupt */ -#define DMA_STATUS_ERI AR_BIT(14) /* early receive interrupt */ -#define DMA_STATUS_AIS AR_BIT(15) /* abnormal interrupt summary */ -#define DMA_STATUS_NIS AR_BIT(16) /* normal interrupt summary */ -#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ -#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ -#define DMA_STATUS_EB_SHIFT 23 /* error bits */ - -#define DMA_CONTROL_SR AR_BIT(1) /* start receive */ -#define DMA_CONTROL_ST AR_BIT(13) /* start transmit */ -#define DMA_CONTROL_SF AR_BIT(21) /* store and forward */ - - -typedef struct { - volatile unsigned int status; // OWN, Device control and status. - volatile unsigned int devcs; // pkt Control bits + Length - volatile unsigned int addr; // Current Address. - volatile unsigned int descr; // Next descriptor in chain. -} ar2313_descr_t; - - -#endif // __ARUBA_DMA_H__ diff --git a/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c b/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c deleted file mode 100644 index d71b6f6848..0000000000 --- a/target/linux/atheros/files-2.6.28/drivers/watchdog/ar2315-wtd.c +++ /dev/null @@ -1,198 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * Copyright (C) 2008 John Crispin - * Based on EP93xx and ifxmips wdt driver - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#define CLOCK_RATE 40000000 -#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x) - -static int wdt_timeout = 20; -static int started = 0; -static int in_use = 0; - -static void -ar2315_wdt_enable(void) -{ - sysRegWrite(AR5315_WD, wdt_timeout * CLOCK_RATE); - sysRegWrite(AR5315_ISR, 0x80); -} - -static ssize_t -ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) -{ - if(len) - ar2315_wdt_enable(); - return len; -} - -static int -ar2315_wdt_open(struct inode *inode, struct file *file) -{ - if(in_use) - return -EBUSY; - ar2315_wdt_enable(); - in_use = started = 1; - return nonseekable_open(inode, file); -} - -static int -ar2315_wdt_release(struct inode *inode, struct file *file) -{ - in_use = 0; - return 0; -} - -static irqreturn_t -ar2315_wdt_interrupt(int irq, void *dev_id) -{ - if(started) - { - printk(KERN_CRIT "watchdog expired, rebooting system\n"); - emergency_restart(); - } else { - sysRegWrite(AR5315_WDC, 0); - sysRegWrite(AR5315_WD, 0); - sysRegWrite(AR5315_ISR, 0x80); - } - return IRQ_HANDLED; -} - -static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, - .identity = "ar2315 Watchdog", -}; - -static int -ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) -{ - int new_wdt_timeout; - int ret = -ENOIOCTLCMD; - - switch(cmd) - { - case WDIOC_GETSUPPORT: - ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0; - break; - - case WDIOC_KEEPALIVE: - ar2315_wdt_enable(); - ret = 0; - break; - - case WDIOC_SETTIMEOUT: - if((ret = get_user(new_wdt_timeout, (int __user *)arg))) - break; - wdt_timeout = HEARTBEAT(new_wdt_timeout); - ar2315_wdt_enable(); - break; - - case WDIOC_GETTIMEOUT: - ret = put_user(wdt_timeout, (int __user *)arg); - break; - } - return ret; -} - -static struct file_operations ar2315_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = ar2315_wdt_write, - .ioctl = ar2315_wdt_ioctl, - .open = ar2315_wdt_open, - .release = ar2315_wdt_release, -}; - -static struct miscdevice ar2315_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &ar2315_wdt_fops, -}; - -static int -ar2315_wdt_probe(struct platform_device *dev) -{ - int ret = 0; - - ar2315_wdt_enable(); - ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL); - if(ret) - { - printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n"); - goto out; - } - - ret = misc_register(&ar2315_wdt_miscdev); - if(ret) - printk(KERN_ERR "ar2315wdt: failed to register miscdev\n"); - -out: - return ret; -} - -static int -ar2315_wdt_remove(struct platform_device *dev) -{ - misc_deregister(&ar2315_wdt_miscdev); - free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL); - return 0; -} - -static struct platform_driver ar2315_wdt_driver = { - .probe = ar2315_wdt_probe, - .remove = ar2315_wdt_remove, - .driver = { - .name = "ar2315_wdt", - .owner = THIS_MODULE, - }, -}; - -static int __init -init_ar2315_wdt(void) -{ - int ret = platform_driver_register(&ar2315_wdt_driver); - if(ret) - printk(KERN_INFO "ar2315_wdt: error registering platfom driver!"); - return ret; -} - -static void __exit -exit_ar2315_wdt(void) -{ - platform_driver_unregister(&ar2315_wdt_driver); -} - -module_init(init_ar2315_wdt); -module_exit(exit_ar2315_wdt); diff --git a/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch b/target/linux/atheros/patches-2.6.28/001-get_c0_compare_irq_function.patch similarity index 75% rename from target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch rename to target/linux/atheros/patches-2.6.28/001-get_c0_compare_irq_function.patch index 9b4331cfdc..934eb5fc4e 100644 --- a/target/linux/atheros/patches-2.6.28/901-get_c0_compare_irq_function.patch +++ b/target/linux/atheros/patches-2.6.28/001-get_c0_compare_irq_function.patch @@ -1,3 +1,7 @@ +Allow boards to provide their own function for reading the timer IRQ number + +Signed-off-by: Gabor Juhos + --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -47,6 +47,7 @@ @@ -27,17 +31,4 @@ #else static inline int mips_clockevent_init(void) { ---- a/arch/mips/atheros/board.c -+++ b/arch/mips/atheros/board.c -@@ -265,6 +265,11 @@ void (*board_time_init)(void); - void __init plat_time_init(void) { - board_time_init(); - } -+ -+unsigned int __cpuinit get_c0_compare_irq(void) -+{ -+ return CP0_LEGACY_COMPARE_IRQ; -+} - #endif - - void __init arch_init_irq(void) + diff --git a/target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch b/target/linux/atheros/patches-2.6.28/002-mips_clocksource_init_war.patch similarity index 100% rename from target/linux/atheros/patches-2.6.28/902-mips_clocksource_init_war.patch rename to target/linux/atheros/patches-2.6.28/002-mips_clocksource_init_war.patch diff --git a/target/linux/atheros/patches-2.6.28/100-board.patch b/target/linux/atheros/patches-2.6.28/100-board.patch index c7f374559f..e4fe7c5c66 100644 --- a/target/linux/atheros/patches-2.6.28/100-board.patch +++ b/target/linux/atheros/patches-2.6.28/100-board.patch @@ -1,29 +1,30 @@ --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig -@@ -60,6 +60,18 @@ config BCM47XX +@@ -60,6 +60,19 @@ config BCM47XX help Support for BCM47XX based boards +config ATHEROS -+ bool "Atheros SoC support (EXPERIMENTAL)" -+ depends on EXPERIMENTAL -+ select DMA_NONCOHERENT ++ bool "Atheros 231x/531x SoC support" + select CEVT_R4K + select CSRC_R4K ++ select DMA_NONCOHERENT + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_SUPPORTS_32BIT_KERNEL + select GENERIC_GPIO ++ help ++ Support for AR231x and AR531x based boards + config MIPS_COBALT bool "Cobalt Server" select CEVT_R4K -@@ -597,6 +609,7 @@ config WR_PPMC +@@ -597,6 +610,7 @@ config WR_PPMC endchoice -+source "arch/mips/atheros/Kconfig" ++source "arch/mips/ar231x/Kconfig" source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" source "arch/mips/emma/Kconfig" @@ -35,32 +36,3507 @@ # +# Atheros AR5312/AR2312 WiSoC +# -+core-$(CONFIG_ATHEROS) += arch/mips/atheros/ -+cflags-$(CONFIG_ATHEROS) += -I$(srctree)/arch/mips/include/asm/mach-atheros ++core-$(CONFIG_ATHEROS) += arch/mips/ar231x/ ++cflags-$(CONFIG_ATHEROS) += -I$(srctree)/arch/mips/include/asm/mach-ar231x +load-$(CONFIG_ATHEROS) += 0xffffffff80041000 + +# # Cobalt Server # core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/ ---- a/arch/mips/include/asm/bootinfo.h -+++ b/arch/mips/include/asm/bootinfo.h -@@ -57,6 +57,18 @@ - #define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */ - #define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */ - +--- /dev/null ++++ b/arch/mips/ar231x/Kconfig +@@ -0,0 +1,27 @@ ++config ATHEROS_AR5312 ++ bool "Atheros 5312/2312+ support" ++ depends on ATHEROS ++ default y ++ ++config ATHEROS_AR2315 ++ bool "Atheros 2315+ support" ++ depends on ATHEROS ++ select DMA_NONCOHERENT ++ select CEVT_R4K ++ select CSRC_R4K ++ select IRQ_CPU ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_32BIT_KERNEL ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select GENERIC_GPIO ++ default y ++ ++config ATHEROS_AR2315_PCI ++ bool "PCI support" ++ depends on ATHEROS_AR2315 ++ select HW_HAS_PCI ++ select PCI ++ select USB_ARCH_HAS_HCD ++ select USB_ARCH_HAS_OHCI ++ select USB_ARCH_HAS_EHCI ++ default y +--- /dev/null ++++ b/arch/mips/ar231x/Makefile +@@ -0,0 +1,14 @@ ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright (C) 2006 FON Technology, SL. ++# Copyright (C) 2006 Imre Kaloz ++# Copyright (C) 2006-2009 Felix Fietkau ++# ++ ++obj-y += board.o prom.o devices.o ++obj-$(CONFIG_ATHEROS_AR5312) += ar5312.o ++obj-$(CONFIG_ATHEROS_AR2315) += ar2315.o ++obj-$(CONFIG_ATHEROS_AR2315_PCI) += pci.o +--- /dev/null ++++ b/arch/mips/ar231x/board.c +@@ -0,0 +1,247 @@ +/* -+ * Valid machtype for group ATHEROS ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau + */ -+#define MACH_GROUP_ATHEROS 26 -+#define MACH_ATHEROS_AR5312 0 -+#define MACH_ATHEROS_AR2312 1 -+#define MACH_ATHEROS_AR2313 2 -+#define MACH_ATHEROS_AR2315 3 -+#define MACH_ATHEROS_AR2316 4 -+#define MACH_ATHEROS_AR2317 5 -+#define MACH_ATHEROS_AR2318 6 + - #define CL_SIZE COMMAND_LINE_SIZE - - extern char *system_type; ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include "devices.h" ++#include "ar5312.h" ++#include "ar2315.h" ++ ++void (*ar231x_irq_dispatch)(void); ++ ++static inline bool ++check_radio_magic(u8 *addr) ++{ ++ addr += 0x7a; /* offset for flash magic */ ++ if ((addr[0] == 0x5a) && (addr[1] == 0xa5)) { ++ return 1; ++ } ++ return 0; ++} ++ ++static inline bool ++check_board_data(u8 *flash_limit, u8 *addr, bool broken) ++{ ++ /* config magic found */ ++ if (*((u32 *)addr) == AR531X_BD_MAGIC) ++ return 1; ++ ++ if (!broken) ++ return 0; ++ ++ if (check_radio_magic(addr + 0xf8)) ++ ar231x_board.radio = addr + 0xf8; ++ if ((addr < flash_limit + 0x10000) && ++ check_radio_magic(addr + 0x10000)) ++ ar231x_board.radio = addr + 0x10000; ++ ++ if (ar231x_board.radio) { ++ /* broken board data detected, use radio data to find the offset, ++ * user will fix this */ ++ return 1; ++ } ++ return 0; ++} ++ ++static u8 * ++find_board_config(u8 *flash_limit, bool broken) ++{ ++ u8 *addr; ++ int found = 0; ++ ++ for (addr = flash_limit - 0x1000; ++ addr >= flash_limit - 0x30000; ++ addr -= 0x1000) { ++ ++ if (check_board_data(flash_limit, addr, broken)) { ++ found = 1; ++ break; ++ } ++ } ++ ++ if (!found) ++ addr = NULL; ++ ++ return addr; ++} ++ ++static u8 * ++find_radio_config(u8 *flash_limit, u8 *board_config) ++{ ++ int found; ++ u8 *radio_config; ++ ++ /* ++ * Now find the start of Radio Configuration data, using heuristics: ++ * Search forward from Board Configuration data by 0x1000 bytes ++ * at a time until we find non-0xffffffff. ++ */ ++ found = 0; ++ for (radio_config = board_config + 0x1000; ++ (radio_config < flash_limit); ++ radio_config += 0x1000) { ++ if ((*(u32 *)radio_config != 0xffffffff) && ++ check_radio_magic(radio_config)) { ++ found = 1; ++ break; ++ } ++ } ++ ++ /* AR2316 relocates radio config to new location */ ++ if (!found) { ++ for (radio_config = board_config + 0xf8; ++ (radio_config < flash_limit - 0x1000 + 0xf8); ++ radio_config += 0x1000) { ++ if ((*(u32 *)radio_config != 0xffffffff) && ++ check_radio_magic(radio_config)) { ++ found = 1; ++ break; ++ } ++ } ++ } ++ ++ if (!found) { ++ printk("Could not find Radio Configuration data\n"); ++ radio_config = 0; ++ } ++ ++ return (u8 *) radio_config; ++} ++ ++int __init ++ar231x_find_config(u8 *flash_limit) ++{ ++ struct ar231x_boarddata *config; ++ unsigned int rcfg_size; ++ int broken_boarddata = 0; ++ u8 *bcfg, *rcfg; ++ u8 *board_data; ++ u8 *radio_data; ++ u32 offset; ++ ++ ar231x_board.config = NULL; ++ ar231x_board.radio = NULL; ++ /* Copy the board and radio data to RAM, because accessing the mapped ++ * memory of the flash directly after booting is not safe */ ++ ++ /* Try to find valid board and radio data */ ++ bcfg = find_board_config(flash_limit, false); ++ ++ /* If that fails, try to at least find valid radio data */ ++ if (!bcfg) { ++ bcfg = find_board_config(flash_limit, true); ++ broken_boarddata = 1; ++ } ++ ++ if (!bcfg) { ++ printk(KERN_WARNING "WARNING: No board configuration data found!\n"); ++ return -ENODEV; ++ } ++ ++ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); ++ ar231x_board.config = (struct ar231x_boarddata *) board_data; ++ memcpy(board_data, bcfg, 0x100); ++ if (broken_boarddata) { ++ printk(KERN_WARNING "WARNING: broken board data detected\n"); ++ config = ar231x_board.config; ++ if (!memcmp(config->enet0_mac, "\x00\x00\x00\x00\x00\x00", 6)) { ++ printk(KERN_INFO "Fixing up empty mac addresses\n"); ++ random_ether_addr(config->enet0_mac); ++ random_ether_addr(config->enet1_mac); ++ } ++ } ++ ++ ++ /* Radio config starts 0x100 bytes after board config, regardless ++ * of what the physical layout on the flash chip looks like */ ++ ++ if (ar231x_board.radio) ++ rcfg = (u8 *) ar231x_board.radio; ++ else ++ rcfg = find_radio_config(flash_limit, bcfg); ++ ++ if (!rcfg) ++ return -ENODEV; ++ ++ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff); ++ ar231x_board.radio = radio_data; ++ offset = radio_data - board_data; ++ printk(KERN_INFO "Radio config found at offset 0x%x(0x%x)\n", rcfg - bcfg, offset); ++ rcfg_size = BOARD_CONFIG_BUFSZ - offset; ++ memcpy(radio_data, rcfg, rcfg_size); ++ ++ return 0; ++} ++ ++static void ++ar231x_halt(void) ++{ ++ local_irq_disable(); ++ while (1); ++} ++ ++void __init ++plat_mem_setup(void) ++{ ++ _machine_halt = ar231x_halt; ++ pm_power_off = ar231x_halt; ++ ++ ar5312_plat_setup(); ++ ar2315_plat_setup(); ++ ++ /* Disable data watchpoints */ ++ write_c0_watchlo0(0); ++} ++ ++ ++asmlinkage void ++plat_irq_dispatch(void) ++{ ++ ar231x_irq_dispatch(); ++} ++ ++void __init ++plat_time_init(void) ++{ ++ ar5312_time_init(); ++ ar2315_time_init(); ++} ++ ++unsigned int __cpuinit ++get_c0_compare_irq(void) ++{ ++ return CP0_LEGACY_COMPARE_IRQ; ++} ++ ++void __init ++arch_init_irq(void) ++{ ++ clear_c0_status(ST0_IM); ++ mips_cpu_irq_init(); ++ ++ /* Initialize interrupt controllers */ ++ ar5312_irq_init(); ++ ar2315_irq_init(); ++} ++ ++ +--- /dev/null ++++ b/arch/mips/ar231x/prom.c +@@ -0,0 +1,37 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright MontaVista Software Inc ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006 Felix Fietkau ++ */ ++ ++/* ++ * Prom setup file for ar531x ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include "ar5312.h" ++#include "ar2315.h" ++ ++void __init prom_init(void) ++{ ++ ar5312_prom_init(); ++ ar2315_prom_init(); ++} ++ ++void __init prom_free_prom_memory(void) ++{ ++} +--- /dev/null ++++ b/arch/mips/ar231x/reset.c +@@ -0,0 +1,162 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define AR531X_RESET_GPIO_IRQ (AR531X_GPIO_IRQ(bcfg->resetConfigGpio)) ++ ++struct event_t { ++ struct work_struct wq; ++ int set; ++ unsigned long jiffies; ++}; ++ ++static struct ar231x_boarddata *bcfg; ++static struct timer_list rst_button_timer; ++ ++extern struct sock *uevent_sock; ++extern u64 uevent_next_seqnum(void); ++static unsigned long seen; ++ ++static inline void add_msg(struct sk_buff *skb, char *msg) ++{ ++ char *scratch; ++ scratch = skb_put(skb, strlen(msg) + 1); ++ sprintf(scratch, msg); ++} ++ ++static void hotplug_button(struct work_struct *wq) ++{ ++ struct sk_buff *skb; ++ struct event_t *event; ++ size_t len; ++ char *scratch, *s; ++ char buf[128]; ++ ++ event = container_of(wq, struct event_t, wq); ++ if (!uevent_sock) ++ goto done; ++ ++ /* allocate message with the maximum possible size */ ++ s = event->set ? "pressed" : "released"; ++ len = strlen(s) + 2; ++ skb = alloc_skb(len + 2048, GFP_KERNEL); ++ if (!skb) ++ goto done; ++ ++ /* add header */ ++ scratch = skb_put(skb, len); ++ sprintf(scratch, "%s@",s); ++ ++ /* copy keys to our continuous event payload buffer */ ++ add_msg(skb, "HOME=/"); ++ add_msg(skb, "PATH=/sbin:/bin:/usr/sbin:/usr/bin"); ++ add_msg(skb, "SUBSYSTEM=button"); ++ add_msg(skb, "BUTTON=reset"); ++ add_msg(skb, (event->set ? "ACTION=pressed" : "ACTION=released")); ++ sprintf(buf, "SEEN=%ld", (event->jiffies - seen)/HZ); ++ add_msg(skb, buf); ++ snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); ++ add_msg(skb, buf); ++ ++ NETLINK_CB(skb).dst_group = 1; ++ netlink_broadcast(uevent_sock, skb, 0, 1, GFP_KERNEL); ++ ++done: ++ kfree(event); ++} ++ ++static int no_release_workaround = 1; ++ ++static void ++reset_button_poll(unsigned long unused) ++{ ++ struct event_t *event; ++ int gpio = ~0; ++ ++ if(!no_release_workaround) ++ return; ++ ++ DO_AR2315(gpio = sysRegRead(AR2315_GPIO_DI);) ++ gpio &= 1 << (AR531X_RESET_GPIO_IRQ - AR531X_GPIO_IRQ_BASE); ++ if(gpio) ++ { ++ rst_button_timer.expires = jiffies + (HZ / 4); ++ add_timer(&rst_button_timer); ++ } else { ++ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); ++ if (!event) ++ { ++ printk("Could not alloc hotplug event\n"); ++ return; ++ } ++ event->set = 0; ++ event->jiffies = jiffies; ++ INIT_WORK(&event->wq, (void *)(void *)hotplug_button); ++ schedule_work(&event->wq); ++ } ++} ++ ++static irqreturn_t button_handler(int irq, void *dev_id) ++{ ++ static int pressed = 0; ++ struct event_t *event; ++ u32 gpio = ~0; ++ ++ event = (struct event_t *) kzalloc(sizeof(struct event_t), GFP_ATOMIC); ++ if (!event) ++ return IRQ_NONE; ++ ++ pressed = !pressed; ++ ++ DO_AR2315(gpio = sysRegRead(AR2315_GPIO_DI);) ++ gpio &= 1 << (irq - AR531X_GPIO_IRQ_BASE); ++ ++ event->set = gpio; ++ if(!event->set) ++ no_release_workaround = 0; ++ ++ event->jiffies = jiffies; ++ ++ INIT_WORK(&event->wq, (void *)(void *)hotplug_button); ++ schedule_work(&event->wq); ++ ++ seen = jiffies; ++ if(event->set && no_release_workaround) ++ mod_timer(&rst_button_timer, jiffies + (HZ / 4)); ++ ++ return IRQ_HANDLED; ++} ++ ++void ar231x_disable_reset_button(void) ++{ ++ disable_irq(AR531X_RESET_GPIO_IRQ); ++} ++ ++EXPORT_SYMBOL(ar231x_disable_reset_button); ++ ++int __init ar231x_init_reset(void) ++{ ++ bcfg = (struct ar231x_boarddata *) board_config; ++ ++ seen = jiffies; ++ ++ init_timer(&rst_button_timer); ++ rst_button_timer.function = reset_button_poll; ++ rst_button_timer.expires = jiffies + HZ / 50; ++ add_timer(&rst_button_timer); ++ ++ request_irq(AR531X_RESET_GPIO_IRQ, &button_handler, IRQF_SAMPLE_RANDOM, "ar231x_reset", NULL); ++ ++ return 0; ++} ++ ++ ++ ++module_init(ar231x_init_reset); +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/ar231x_platform.h +@@ -0,0 +1,83 @@ ++#ifndef __AR531X_PLATFORM_H ++#define __AR531X_PLATFORM_H ++ ++/* ++ * This is board-specific data that is stored in a "fixed" location in flash. ++ * It is shared across operating systems, so it should not be changed lightly. ++ * The main reason we need it is in order to extract the ethernet MAC ++ * address(es). ++ */ ++struct ar231x_boarddata { ++ u32 magic; /* board data is valid */ ++#define AR531X_BD_MAGIC 0x35333131 /* "5311", for all 531x platforms */ ++ u16 cksum; /* checksum (starting with BD_REV 2) */ ++ u16 rev; /* revision of this struct */ ++#define BD_REV 4 ++ char boardName[64]; /* Name of board */ ++ u16 major; /* Board major number */ ++ u16 minor; /* Board minor number */ ++ u32 flags; /* Board configuration */ ++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ ++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ ++#define BD_UART1 0x00000004 /* UART1 is stuffed */ ++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ ++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ ++#define BD_SYSLED 0x00000020 /* System LED stuffed */ ++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ ++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ ++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ ++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ ++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ memCap for testing */ ++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ ++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ ++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ ++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ ++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ ++ u16 resetConfigGpio; /* Reset factory GPIO pin */ ++ u16 sysLedGpio; /* System LED GPIO pin */ ++ ++ u32 cpuFreq; /* CPU core frequency in Hz */ ++ u32 sysFreq; /* System frequency in Hz */ ++ u32 cntFreq; /* Calculated C0_COUNT frequency */ ++ ++ u8 wlan0_mac[6]; ++ u8 enet0_mac[6]; ++ u8 enet1_mac[6]; ++ ++ u16 pciId; /* Pseudo PCIID for common code */ ++ u16 memCap; /* cap bank1 in MB */ ++ ++ /* version 3 */ ++ u8 wlan1_mac[6]; /* (ar5212) */ ++}; ++ ++#define BOARD_CONFIG_BUFSZ 0x1000 ++ ++/* ++ * Platform device information for the Wireless MAC ++ */ ++struct ar231x_board_config { ++ u16 devid; ++ ++ /* board config data */ ++ struct ar231x_boarddata *config; ++ ++ /* radio calibration data */ ++ const char *radio; ++}; ++ ++/* ++ * Platform device information for the Ethernet MAC ++ */ ++struct ar231x_eth { ++ u32 reset_base; ++ u32 reset_mac; ++ u32 reset_phy; ++ u32 phy_base; ++ struct ar231x_board_config *config; ++ char *macaddr; ++}; ++ ++#endif /* __AR531X_PLATFORM_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/cpu-feature-overrides.h +@@ -0,0 +1,84 @@ ++/* ++ * Atheros SoC specific CPU feature overrides ++ * ++ * Copyright (C) 2008 Gabor Juhos ++ * ++ * This file was derived from: include/asm-mips/cpu-features.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++#ifndef __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H ++ ++/* ++ * The ATHEROS SoCs have MIPS 4Kc/4KEc core. ++ */ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 1 ++#define cpu_has_3k_cache 0 ++#define cpu_has_4k_cache 1 ++#define cpu_has_tx39_cache 0 ++#define cpu_has_sb1_cache 0 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 1 ++/* #define cpu_has_watch ? */ ++/* #define cpu_has_divec ? */ ++/* #define cpu_has_vce ? */ ++/* #define cpu_has_cache_cdex_p ? */ ++/* #define cpu_has_cache_cdex_s ? */ ++/* #define cpu_has_prefetch ? */ ++/* #define cpu_has_mcheck ? */ ++#define cpu_has_ejtag 1 ++ ++#if !defined(CONFIG_ATHEROS_AR5312) ++# define cpu_has_llsc 1 ++#else ++/* ++ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the ++ * ll/sc instructions. ++ */ ++# define cpu_has_llsc 0 ++#endif ++ ++#define cpu_has_mips16 0 ++#define cpu_has_mdmx 0 ++#define cpu_has_mips3d 0 ++#define cpu_has_smartmips 0 ++ ++/* #define cpu_has_vtag_icache ? */ ++/* #define cpu_has_dc_aliases ? */ ++/* #define cpu_has_ic_fills_f_dc ? */ ++/* #define cpu_has_pindexed_dcache ? */ ++ ++/* #define cpu_icache_snoops_remote_store ? */ ++ ++#define cpu_has_mips32r1 1 ++ ++#if !defined(CONFIG_ATHEROS_AR5312) ++# define cpu_has_mips32r2 1 ++#endif ++ ++#define cpu_has_mips64r1 0 ++#define cpu_has_mips64r2 0 ++ ++#define cpu_has_dsp 0 ++#define cpu_has_mipsmt 0 ++ ++/* #define cpu_has_nofpuex ? */ ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++/* #define cpu_has_inclusive_pcaches ? */ ++ ++/* #define cpu_dcache_line_size() ? */ ++/* #define cpu_icache_line_size() ? */ ++ ++#endif /* __ASM_MACH_ATHEROS_CPU_FEATURE_OVERRIDES_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/dma-coherence.h +@@ -0,0 +1,41 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2006 Ralf Baechle ++ * Copyright (C) 2007 Felix Fietkau ++ * ++ */ ++#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H ++#define __ASM_MACH_GENERIC_DMA_COHERENCE_H ++ ++#define PCI_DMA_OFFSET 0x20000000 ++ ++struct device; ++ ++static dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size) ++{ ++ return virt_to_phys(addr) + (dev != NULL ? PCI_DMA_OFFSET : 0); ++} ++ ++static dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page) ++{ ++ return page_to_phys(page) + (dev != NULL ? PCI_DMA_OFFSET : 0); ++} ++ ++static unsigned long plat_dma_addr_to_phys(dma_addr_t dma_addr) ++{ ++ return (dma_addr > PCI_DMA_OFFSET ? dma_addr - PCI_DMA_OFFSET : dma_addr); ++} ++ ++static void plat_unmap_dma_mem(dma_addr_t dma_addr) ++{ ++} ++ ++static inline int plat_device_is_coherent(struct device *dev) ++{ ++ return 0; ++} ++ ++#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/gpio.h +@@ -0,0 +1,79 @@ ++#ifndef _ATHEROS_GPIO_H_ ++#define _ATHEROS_GPIO_H_ ++ ++#include ++ ++struct ar231x_gpiodev { ++ u32 valid_mask; ++ u32 (*get_output)(void); ++ u32 (*set_output)(u32 mask, u32 val); ++ u32 (*get)(void); ++ u32 (*set)(u32 mask, u32 val); ++}; ++ ++extern const struct ar231x_gpiodev *ar231x_gpiodev; ++ ++/* ++ * Wrappers for the generic GPIO layer ++ */ ++ ++static inline int gpio_direction_input(unsigned gpio) { ++ u32 mask = 1 << gpio; ++ ++ if (!(ar231x_gpiodev->valid_mask & mask)) ++ return -ENXIO; ++ ++ ar231x_gpiodev->set_output(mask, 0); ++ return 0; ++} ++ ++static inline void gpio_set_value(unsigned gpio, int value) { ++ u32 mask = 1 << gpio; ++ ++ if (!(ar231x_gpiodev->valid_mask & mask)) ++ return; ++ ++ ar231x_gpiodev->set(mask, (!!value) * mask); ++} ++ ++static inline int gpio_direction_output(unsigned gpio, int value) { ++ u32 mask = 1 << gpio; ++ ++ if (!(ar231x_gpiodev->valid_mask & mask)) ++ return -ENXIO; ++ ++ ar231x_gpiodev->set_output(mask, mask); ++ ar231x_gpiodev->set(mask, (!!value) * mask); ++ return 0; ++} ++ ++/* Reads the gpio pin. Unchecked function */ ++static inline int gpio_get_value(unsigned gpio) { ++ u32 mask = 1 << gpio; ++ ++ if (!(ar231x_gpiodev->valid_mask & mask)) ++ return 0; ++ ++ return !!(ar231x_gpiodev->get() & mask); ++} ++ ++static inline int gpio_request(unsigned gpio, const char *label) { ++ return 0; ++} ++ ++static inline void gpio_free(unsigned gpio) { ++} ++ ++/* Returns IRQ to attach for gpio. Unchecked function */ ++static inline int gpio_to_irq(unsigned gpio) { ++ return AR531X_GPIO_IRQ(gpio); ++} ++ ++/* Returns gpio for IRQ attached. Unchecked function */ ++static inline int irq_to_gpio(unsigned irq) { ++ return (irq - (AR531X_GPIO_IRQ(0))); ++} ++ ++#include /* cansleep wrappers */ ++ ++#endif +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/reset.h +@@ -0,0 +1,6 @@ ++#ifndef __AR531X_RESET_H ++#define __AR531X_RESET_H ++ ++void ar531x_disable_reset_button(void); ++ ++#endif /* __AR531X_RESET_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/war.h +@@ -0,0 +1,25 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2008 Felix Fietkau ++ */ ++#ifndef __ASM_MIPS_MACH_ATHEROS_WAR_H ++#define __ASM_MIPS_MACH_ATHEROS_WAR_H ++ ++#define R4600_V1_INDEX_ICACHEOP_WAR 0 ++#define R4600_V1_HIT_CACHEOP_WAR 0 ++#define R4600_V2_HIT_CACHEOP_WAR 0 ++#define R5432_CP0_INTERRUPT_WAR 0 ++#define BCM1250_M3_WAR 0 ++#define SIBYTE_1956_WAR 0 ++#define MIPS4K_ICACHE_REFILL_WAR 0 ++#define MIPS_CACHE_SYNC_WAR 0 ++#define TX49XX_ICACHE_INDEX_INV_WAR 0 ++#define RM9000_CDEX_SMP_WAR 0 ++#define ICACHE_REFILLS_WORKAROUND_WAR 0 ++#define R10000_LLSC_WAR 0 ++#define MIPS34K_MISSED_ITLB_WAR 0 ++ ++#endif /* __ASM_MIPS_MACH_ATHEROS_WAR_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/ar2315_regs.h +@@ -0,0 +1,580 @@ ++/* ++ * Register definitions for AR2315+ ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2008 Felix Fietkau ++ */ ++ ++#ifndef __AR2315_REG_H ++#define __AR2315_REG_H ++ ++/* ++ * IRQs ++ */ ++#define AR2315_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ ++#define AR2315_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ ++#define AR2315_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ ++#define AR2315_IRQ_LCBUS_PCI MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ ++#define AR2315_IRQ_WLAN0_POLL MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++ ++/* ++ * Address map ++ */ ++#define AR2315_SPI_READ 0x08000000 /* SPI FLASH */ ++#define AR2315_WLAN0 0xB0000000 /* Wireless MMR */ ++#define AR2315_PCI 0xB0100000 /* PCI MMR */ ++#define AR2315_SDRAMCTL 0xB0300000 /* SDRAM MMR */ ++#define AR2315_LOCAL 0xB0400000 /* LOCAL BUS MMR */ ++#define AR2315_ENET0 0xB0500000 /* ETHERNET MMR */ ++#define AR2315_DSLBASE 0xB1000000 /* RESET CONTROL MMR */ ++#define AR2315_UART0 0xB1100003 /* UART MMR */ ++#define AR2315_SPI 0xB1300000 /* SPI FLASH MMR */ ++#define AR2315_PCIEXT 0x80000000 /* pci external */ ++ ++/* ++ * Reset Register ++ */ ++#define AR2315_COLD_RESET (AR2315_DSLBASE + 0x0000) ++ ++#define AR2315_RESET_COLD_AHB 0x00000001 ++#define AR2315_RESET_COLD_APB 0x00000002 ++#define AR2315_RESET_COLD_CPU 0x00000004 ++#define AR2315_RESET_COLD_CPUWARM 0x00000008 ++#define AR2315_RESET_SYSTEM (RESET_COLD_CPU | RESET_COLD_APB | RESET_COLD_AHB) /* full system */ ++#define AR2317_RESET_SYSTEM 0x00000010 ++ ++ ++#define AR2315_RESET (AR2315_DSLBASE + 0x0004) ++ ++#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ ++#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BaseBand */ ++#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ ++#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ ++#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset memory controller */ ++#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */ ++#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ ++#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI interface */ ++#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */ ++#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR interface */ ++#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ ++#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 mac */ ++ ++/* ++ * AHB master arbitration control ++ */ ++#define AR2315_AHB_ARB_CTL (AR2315_DSLBASE + 0x0008) ++ ++#define AR2315_ARB_CPU 0x00000001 /* CPU, default */ ++#define AR2315_ARB_WLAN 0x00000002 /* WLAN */ ++#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ ++#define AR2315_ARB_LOCAL 0x00000008 /* LOCAL */ ++#define AR2315_ARB_PCI 0x00000010 /* PCI */ ++#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */ ++#define AR2315_ARB_RETRY 0x00000100 /* retry policy, debug only */ ++ ++/* ++ * Config Register ++ */ ++#define AR2315_ENDIAN_CTL (AR2315_DSLBASE + 0x000c) ++ ++#define AR2315_CONFIG_AHB 0x00000001 /* EC - AHB bridge endianess */ ++#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ ++#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ ++#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */ ++#define AR2315_CONFIG_MEMCTL 0x00000010 /* Memory controller endianess */ ++#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ ++#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ ++ ++#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ ++#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */ ++#define AR2315_CONFIG_PCIAHB 0x00000800 ++#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000 ++#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */ ++#define AR2315_CONFIG_CPU_DRAM 0x00010000 ++#define AR2315_CONFIG_CPU_PCI 0x00020000 ++#define AR2315_CONFIG_CPU_MMR 0x00040000 ++#define AR2315_CONFIG_BIG 0x00000400 ++ ++ ++/* ++ * NMI control ++ */ ++#define AR2315_NMI_CTL (AR2315_DSLBASE + 0x0010) ++ ++#define AR2315_NMI_EN 1 ++ ++/* ++ * Revision Register - Initial value is 0x3010 (WMAC 3.0, AR531X 1.0). ++ */ ++#define AR2315_SREV (AR2315_DSLBASE + 0x0014) ++ ++#define AR2315_REV_MAJ 0x00f0 ++#define AR2315_REV_MAJ_S 4 ++#define AR2315_REV_MIN 0x000f ++#define AR2315_REV_MIN_S 0 ++#define AR2315_REV_CHIP (AR2315_REV_MAJ|AR2315_REV_MIN) ++ ++/* ++ * Interface Enable ++ */ ++#define AR2315_IF_CTL (AR2315_DSLBASE + 0x0018) ++ ++#define AR2315_IF_MASK 0x00000007 ++#define AR2315_IF_DISABLED 0 ++#define AR2315_IF_PCI 1 ++#define AR2315_IF_TS_LOCAL 2 ++#define AR2315_IF_ALL 3 /* only for emulation with separate pins */ ++#define AR2315_IF_LOCAL_HOST 0x00000008 ++#define AR2315_IF_PCI_HOST 0x00000010 ++#define AR2315_IF_PCI_INTR 0x00000020 ++#define AR2315_IF_PCI_CLK_MASK 0x00030000 ++#define AR2315_IF_PCI_CLK_INPUT 0 ++#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1 ++#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2 ++#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3 ++#define AR2315_IF_PCI_CLK_SHIFT 16 ++ ++/* ++ * APB Interrupt control ++ */ ++ ++#define AR2315_ISR (AR2315_DSLBASE + 0x0020) ++#define AR2315_IMR (AR2315_DSLBASE + 0x0024) ++#define AR2315_GISR (AR2315_DSLBASE + 0x0028) ++ ++#define AR2315_ISR_UART0 0x0001 /* high speed UART */ ++#define AR2315_ISR_I2C_RSVD 0x0002 /* I2C bus */ ++#define AR2315_ISR_SPI 0x0004 /* SPI bus */ ++#define AR2315_ISR_AHB 0x0008 /* AHB error */ ++#define AR2315_ISR_APB 0x0010 /* APB error */ ++#define AR2315_ISR_TIMER 0x0020 /* timer */ ++#define AR2315_ISR_GPIO 0x0040 /* GPIO */ ++#define AR2315_ISR_WD 0x0080 /* watchdog */ ++#define AR2315_ISR_IR_RSVD 0x0100 /* IR */ ++ ++#define AR2315_GISR_MISC 0x0001 ++#define AR2315_GISR_WLAN0 0x0002 ++#define AR2315_GISR_MPEGTS_RSVD 0x0004 ++#define AR2315_GISR_LOCALPCI 0x0008 ++#define AR2315_GISR_WMACPOLL 0x0010 ++#define AR2315_GISR_TIMER 0x0020 ++#define AR2315_GISR_ETHERNET 0x0040 ++ ++/* ++ * Interrupt routing from IO to the processor IP bits ++ * Define our inter mask and level ++ */ ++#define AR2315_INTR_MISCIO SR_IBIT3 ++#define AR2315_INTR_WLAN0 SR_IBIT4 ++#define AR2315_INTR_ENET0 SR_IBIT5 ++#define AR2315_INTR_LOCALPCI SR_IBIT6 ++#define AR2315_INTR_WMACPOLL SR_IBIT7 ++#define AR2315_INTR_COMPARE SR_IBIT8 ++ ++/* ++ * Timers ++ */ ++#define AR2315_TIMER (AR2315_DSLBASE + 0x0030) ++#define AR2315_RELOAD (AR2315_DSLBASE + 0x0034) ++#define AR2315_WD (AR2315_DSLBASE + 0x0038) ++#define AR2315_WDC (AR2315_DSLBASE + 0x003c) ++ ++#define AR2315_WDC_IGNORE_EXPIRATION 0x00000000 ++#define AR2315_WDC_NMI 0x00000001 /* NMI on watchdog */ ++#define AR2315_WDC_RESET 0x00000002 /* reset on watchdog */ ++ ++/* ++ * CPU Performance Counters ++ */ ++#define AR2315_PERFCNT0 (AR2315_DSLBASE + 0x0048) ++#define AR2315_PERFCNT1 (AR2315_DSLBASE + 0x004c) ++ ++#define AR2315_PERF0_DATAHIT 0x0001 /* Count Data Cache Hits */ ++#define AR2315_PERF0_DATAMISS 0x0002 /* Count Data Cache Misses */ ++#define AR2315_PERF0_INSTHIT 0x0004 /* Count Instruction Cache Hits */ ++#define AR2315_PERF0_INSTMISS 0x0008 /* Count Instruction Cache Misses */ ++#define AR2315_PERF0_ACTIVE 0x0010 /* Count Active Processor Cycles */ ++#define AR2315_PERF0_WBHIT 0x0020 /* Count CPU Write Buffer Hits */ ++#define AR2315_PERF0_WBMISS 0x0040 /* Count CPU Write Buffer Misses */ ++ ++#define AR2315_PERF1_EB_ARDY 0x0001 /* Count EB_ARdy signal */ ++#define AR2315_PERF1_EB_AVALID 0x0002 /* Count EB_AValid signal */ ++#define AR2315_PERF1_EB_WDRDY 0x0004 /* Count EB_WDRdy signal */ ++#define AR2315_PERF1_EB_RDVAL 0x0008 /* Count EB_RdVal signal */ ++#define AR2315_PERF1_VRADDR 0x0010 /* Count valid read address cycles */ ++#define AR2315_PERF1_VWADDR 0x0020 /* Count valid write address cycles */ ++#define AR2315_PERF1_VWDATA 0x0040 /* Count valid write data cycles */ ++ ++/* ++ * AHB Error Reporting. ++ */ ++#define AR2315_AHB_ERR0 (AR2315_DSLBASE + 0x0050) /* error */ ++#define AR2315_AHB_ERR1 (AR2315_DSLBASE + 0x0054) /* haddr */ ++#define AR2315_AHB_ERR2 (AR2315_DSLBASE + 0x0058) /* hwdata */ ++#define AR2315_AHB_ERR3 (AR2315_DSLBASE + 0x005c) /* hrdata */ ++#define AR2315_AHB_ERR4 (AR2315_DSLBASE + 0x0060) /* status */ ++ ++#define AHB_ERROR_DET 1 /* AHB Error has been detected, */ ++ /* write 1 to clear all bits in ERR0 */ ++#define AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ ++#define AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ ++ ++#define AR2315_PROCERR_HMAST 0x0000000f ++#define AR2315_PROCERR_HMAST_DFLT 0 ++#define AR2315_PROCERR_HMAST_WMAC 1 ++#define AR2315_PROCERR_HMAST_ENET 2 ++#define AR2315_PROCERR_HMAST_PCIENDPT 3 ++#define AR2315_PROCERR_HMAST_LOCAL 4 ++#define AR2315_PROCERR_HMAST_CPU 5 ++#define AR2315_PROCERR_HMAST_PCITGT 6 ++ ++#define AR2315_PROCERR_HMAST_S 0 ++#define AR2315_PROCERR_HWRITE 0x00000010 ++#define AR2315_PROCERR_HSIZE 0x00000060 ++#define AR2315_PROCERR_HSIZE_S 5 ++#define AR2315_PROCERR_HTRANS 0x00000180 ++#define AR2315_PROCERR_HTRANS_S 7 ++#define AR2315_PROCERR_HBURST 0x00000e00 ++#define AR2315_PROCERR_HBURST_S 9 ++ ++/* ++ * Clock Control ++ */ ++#define AR2315_PLLC_CTL (AR2315_DSLBASE + 0x0064) ++#define AR2315_PLLV_CTL (AR2315_DSLBASE + 0x0068) ++#define AR2315_CPUCLK (AR2315_DSLBASE + 0x006c) ++#define AR2315_AMBACLK (AR2315_DSLBASE + 0x0070) ++#define AR2315_SYNCCLK (AR2315_DSLBASE + 0x0074) ++#define AR2315_DSL_SLEEP_CTL (AR2315_DSLBASE + 0x0080) ++#define AR2315_DSL_SLEEP_DUR (AR2315_DSLBASE + 0x0084) ++ ++/* PLLc Control fields */ ++#define PLLC_REF_DIV_M 0x00000003 ++#define PLLC_REF_DIV_S 0 ++#define PLLC_FDBACK_DIV_M 0x0000007C ++#define PLLC_FDBACK_DIV_S 2 ++#define PLLC_ADD_FDBACK_DIV_M 0x00000080 ++#define PLLC_ADD_FDBACK_DIV_S 7 ++#define PLLC_CLKC_DIV_M 0x0001c000 ++#define PLLC_CLKC_DIV_S 14 ++#define PLLC_CLKM_DIV_M 0x00700000 ++#define PLLC_CLKM_DIV_S 20 ++ ++/* CPU CLK Control fields */ ++#define CPUCLK_CLK_SEL_M 0x00000003 ++#define CPUCLK_CLK_SEL_S 0 ++#define CPUCLK_CLK_DIV_M 0x0000000c ++#define CPUCLK_CLK_DIV_S 2 ++ ++/* AMBA CLK Control fields */ ++#define AMBACLK_CLK_SEL_M 0x00000003 ++#define AMBACLK_CLK_SEL_S 0 ++#define AMBACLK_CLK_DIV_M 0x0000000c ++#define AMBACLK_CLK_DIV_S 2 ++ ++/* ++ * GPIO ++ */ ++#define AR2315_GPIO_DI (AR2315_DSLBASE + 0x0088) ++#define AR2315_GPIO_DO (AR2315_DSLBASE + 0x0090) ++#define AR2315_GPIO_CR (AR2315_DSLBASE + 0x0098) ++#define AR2315_GPIO_INT (AR2315_DSLBASE + 0x00a0) ++ ++#define AR2315_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR2315_GPIO_CR_O(x) (1 << (x)) /* output */ ++#define AR2315_GPIO_CR_I(x) (0) /* input */ ++ ++#define AR2315_GPIO_INT_S(x) (x) /* interrupt enable */ ++#define AR2315_GPIO_INT_M (0x3F) /* mask for int */ ++#define AR2315_GPIO_INT_LVL(x) ((x) << 6) /* interrupt level */ ++#define AR2315_GPIO_INT_LVL_M ((0x3) << 6) /* mask for int level */ ++ ++#define AR2315_GPIO_INT_MAX_Y 1 /* Maximum value of Y for AR5313_GPIO_INT_* macros */ ++#define AR2315_GPIO_INT_LVL_OFF 0 /* Triggerring off */ ++#define AR2315_GPIO_INT_LVL_LOW 1 /* Low Level Triggered */ ++#define AR2315_GPIO_INT_LVL_HIGH 2 /* High Level Triggered */ ++#define AR2315_GPIO_INT_LVL_EDGE 3 /* Edge Triggered */ ++ ++#define AR2315_RESET_GPIO 5 ++#define AR2315_NUM_GPIO 22 ++ ++/* ++ * PCI Clock Control ++ */ ++#define AR2315_PCICLK (AR2315_DSLBASE + 0x00a4) ++ ++#define AR2315_PCICLK_INPUT_M 0x3 ++#define AR2315_PCICLK_INPUT_S 0 ++ ++#define AR2315_PCICLK_PLLC_CLKM 0 ++#define AR2315_PCICLK_PLLC_CLKM1 1 ++#define AR2315_PCICLK_PLLC_CLKC 2 ++#define AR2315_PCICLK_REF_CLK 3 ++ ++#define AR2315_PCICLK_DIV_M 0xc ++#define AR2315_PCICLK_DIV_S 2 ++ ++#define AR2315_PCICLK_IN_FREQ 0 ++#define AR2315_PCICLK_IN_FREQ_DIV_6 1 ++#define AR2315_PCICLK_IN_FREQ_DIV_8 2 ++#define AR2315_PCICLK_IN_FREQ_DIV_10 3 ++ ++/* ++ * Observation Control Register ++ */ ++#define AR2315_OCR (AR2315_DSLBASE + 0x00b0) ++#define OCR_GPIO0_IRIN 0x0040 ++#define OCR_GPIO1_IROUT 0x0080 ++#define OCR_GPIO3_RXCLR 0x0200 ++ ++/* ++ * General Clock Control ++ */ ++ ++#define AR2315_MISCCLK (AR2315_DSLBASE + 0x00b4) ++#define MISCCLK_PLLBYPASS_EN 0x00000001 ++#define MISCCLK_PROCREFCLK 0x00000002 ++ ++/* ++ * SDRAM Controller ++ * - No read or write buffers are included. ++ */ ++#define AR2315_MEM_CFG (AR2315_SDRAMCTL + 0x00) ++#define AR2315_MEM_CTRL (AR2315_SDRAMCTL + 0x0c) ++#define AR2315_MEM_REF (AR2315_SDRAMCTL + 0x10) ++ ++#define SDRAM_DATA_WIDTH_M 0x00006000 ++#define SDRAM_DATA_WIDTH_S 13 ++ ++#define SDRAM_COL_WIDTH_M 0x00001E00 ++#define SDRAM_COL_WIDTH_S 9 ++ ++#define SDRAM_ROW_WIDTH_M 0x000001E0 ++#define SDRAM_ROW_WIDTH_S 5 ++ ++#define SDRAM_BANKADDR_BITS_M 0x00000018 ++#define SDRAM_BANKADDR_BITS_S 3 ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++ ++#define AR2315_SPI_CTL (AR2315_SPI + 0x00) ++#define AR2315_SPI_OPCODE (AR2315_SPI + 0x04) ++#define AR2315_SPI_DATA (AR2315_SPI + 0x08) ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++/* ++ * PCI Bus Interface Registers ++ */ ++#define AR2315_PCI_1MS_REG (AR2315_PCI + 0x0008) ++#define AR2315_PCI_1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++ ++#define AR2315_PCI_MISC_CONFIG (AR2315_PCI + 0x000c) ++#define AR2315_PCIMISC_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR2315_PCIMISC_CFG_SEL 0x00000002 /* mem or config cycles */ ++#define AR2315_PCIMISC_GIG_MASK 0x0000000C /* bits 31-30 for pci req */ ++#define AR2315_PCIMISC_RST_MODE 0x00000030 ++#define AR2315_PCIRST_INPUT 0x00000000 /* 4:5=0 rst is input */ ++#define AR2315_PCIRST_LOW 0x00000010 /* 4:5=1 rst to GND */ ++#define AR2315_PCIRST_HIGH 0x00000020 /* 4:5=2 rst to VDD */ ++#define AR2315_PCIGRANT_EN 0x00000000 /* 6:7=0 early grant en */ ++#define AR2315_PCIGRANT_FRAME 0x00000040 /* 6:7=1 grant waits 4 frame */ ++#define AR2315_PCIGRANT_IDLE 0x00000080 /* 6:7=2 grant waits 4 idle */ ++#define AR2315_PCIGRANT_GAP 0x00000000 /* 6:7=2 grant waits 4 idle */ ++#define AR2315_PCICACHE_DIS 0x00001000 /* PCI external access cache disable */ ++ ++#define AR2315_PCI_OUT_TSTAMP (AR2315_PCI + 0x0010) ++ ++#define AR2315_PCI_UNCACHE_CFG (AR2315_PCI + 0x0014) ++ ++#define AR2315_PCI_IN_EN (AR2315_PCI + 0x0100) ++#define AR2315_PCI_IN_EN0 0x01 /* Enable chain 0 */ ++#define AR2315_PCI_IN_EN1 0x02 /* Enable chain 1 */ ++#define AR2315_PCI_IN_EN2 0x04 /* Enable chain 2 */ ++#define AR2315_PCI_IN_EN3 0x08 /* Enable chain 3 */ ++ ++#define AR2315_PCI_IN_DIS (AR2315_PCI + 0x0104) ++#define AR2315_PCI_IN_DIS0 0x01 /* Disable chain 0 */ ++#define AR2315_PCI_IN_DIS1 0x02 /* Disable chain 1 */ ++#define AR2315_PCI_IN_DIS2 0x04 /* Disable chain 2 */ ++#define AR2315_PCI_IN_DIS3 0x08 /* Disable chain 3 */ ++ ++#define AR2315_PCI_IN_PTR (AR2315_PCI + 0x0200) ++ ++#define AR2315_PCI_OUT_EN (AR2315_PCI + 0x0400) ++#define AR2315_PCI_OUT_EN0 0x01 /* Enable chain 0 */ ++ ++#define AR2315_PCI_OUT_DIS (AR2315_PCI + 0x0404) ++#define AR2315_PCI_OUT_DIS0 0x01 /* Disable chain 0 */ ++ ++#define AR2315_PCI_OUT_PTR (AR2315_PCI + 0x0408) ++ ++#define AR2315_PCI_INT_STATUS (AR2315_PCI + 0x0500) /* write one to clr */ ++#define AR2315_PCI_TXINT 0x00000001 /* Desc In Completed */ ++#define AR2315_PCI_TXOK 0x00000002 /* Desc In OK */ ++#define AR2315_PCI_TXERR 0x00000004 /* Desc In ERR */ ++#define AR2315_PCI_TXEOL 0x00000008 /* Desc In End-of-List */ ++#define AR2315_PCI_RXINT 0x00000010 /* Desc Out Completed */ ++#define AR2315_PCI_RXOK 0x00000020 /* Desc Out OK */ ++#define AR2315_PCI_RXERR 0x00000040 /* Desc Out ERR */ ++#define AR2315_PCI_RXEOL 0x00000080 /* Desc Out EOL */ ++#define AR2315_PCI_TXOOD 0x00000200 /* Desc In Out-of-Desc */ ++#define AR2315_PCI_MASK 0x0000FFFF /* Desc Mask */ ++#define AR2315_PCI_EXT_INT 0x02000000 ++#define AR2315_PCI_ABORT_INT 0x04000000 ++ ++#define AR2315_PCI_INT_MASK (AR2315_PCI + 0x0504) /* same as INT_STATUS */ ++ ++#define AR2315_PCI_INTEN_REG (AR2315_PCI + 0x0508) ++#define AR2315_PCI_INT_DISABLE 0x00 /* disable pci interrupts */ ++#define AR2315_PCI_INT_ENABLE 0x01 /* enable pci interrupts */ ++ ++#define AR2315_PCI_HOST_IN_EN (AR2315_PCI + 0x0800) ++#define AR2315_PCI_HOST_IN_DIS (AR2315_PCI + 0x0804) ++#define AR2315_PCI_HOST_IN_PTR (AR2315_PCI + 0x0810) ++#define AR2315_PCI_HOST_OUT_EN (AR2315_PCI + 0x0900) ++#define AR2315_PCI_HOST_OUT_DIS (AR2315_PCI + 0x0904) ++#define AR2315_PCI_HOST_OUT_PTR (AR2315_PCI + 0x0908) ++ ++ ++/* ++ * Local Bus Interface Registers ++ */ ++#define AR2315_LB_CONFIG (AR2315_LOCAL + 0x0000) ++#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ ++#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ ++#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ ++#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ ++#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ ++#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ ++#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ ++#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ ++#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ ++#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ ++#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ ++#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ ++#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ ++#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ ++#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ ++#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ ++#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ ++#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ ++#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ ++#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ ++#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ ++#define AR2315_LBCONF_INT_CTR3 0x000C0000 /* GND drive, Vdd drive */ ++#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ ++#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ ++#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ ++ ++#define AR2315_LB_CLKSEL (AR2315_LOCAL + 0x0004) ++#define AR2315_LBCLK_EXT 0x0001 /* use external clk for lb */ ++ ++#define AR2315_LB_1MS (AR2315_LOCAL + 0x0008) ++#define AR2315_LB1MS_MASK 0x3FFFF /* # of AHB clk cycles in 1ms */ ++ ++#define AR2315_LB_MISCCFG (AR2315_LOCAL + 0x000C) ++#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ ++#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ ++#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ ++#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ ++#define AR2315_LBM_TIMEOUT_MASK 0x00FFFF80 ++#define AR2315_LBM_TIMEOUT_SHFT 7 ++#define AR2315_LBM_PORTMUX 0x07000000 ++ ++ ++#define AR2315_LB_RXTSOFF (AR2315_LOCAL + 0x0010) ++ ++#define AR2315_LB_TX_CHAIN_EN (AR2315_LOCAL + 0x0100) ++#define AR2315_LB_TXEN_0 0x01 ++#define AR2315_LB_TXEN_1 0x02 ++#define AR2315_LB_TXEN_2 0x04 ++#define AR2315_LB_TXEN_3 0x08 ++ ++#define AR2315_LB_TX_CHAIN_DIS (AR2315_LOCAL + 0x0104) ++#define AR2315_LB_TX_DESC_PTR (AR2315_LOCAL + 0x0200) ++ ++#define AR2315_LB_RX_CHAIN_EN (AR2315_LOCAL + 0x0400) ++#define AR2315_LB_RXEN 0x01 ++ ++#define AR2315_LB_RX_CHAIN_DIS (AR2315_LOCAL + 0x0404) ++#define AR2315_LB_RX_DESC_PTR (AR2315_LOCAL + 0x0408) ++ ++#define AR2315_LB_INT_STATUS (AR2315_LOCAL + 0x0500) ++#define AR2315_INT_TX_DESC 0x0001 ++#define AR2315_INT_TX_OK 0x0002 ++#define AR2315_INT_TX_ERR 0x0004 ++#define AR2315_INT_TX_EOF 0x0008 ++#define AR2315_INT_RX_DESC 0x0010 ++#define AR2315_INT_RX_OK 0x0020 ++#define AR2315_INT_RX_ERR 0x0040 ++#define AR2315_INT_RX_EOF 0x0080 ++#define AR2315_INT_TX_TRUNC 0x0100 ++#define AR2315_INT_TX_STARVE 0x0200 ++#define AR2315_INT_LB_TIMEOUT 0x0400 ++#define AR2315_INT_LB_ERR 0x0800 ++#define AR2315_INT_MBOX_WR 0x1000 ++#define AR2315_INT_MBOX_RD 0x2000 ++ ++/* Bit definitions for INT MASK are the same as INT_STATUS */ ++#define AR2315_LB_INT_MASK (AR2315_LOCAL + 0x0504) ++ ++#define AR2315_LB_INT_EN (AR2315_LOCAL + 0x0508) ++#define AR2315_LB_MBOX (AR2315_LOCAL + 0x0600) ++ ++/* ++ * IR Interface Registers ++ */ ++#define AR2315_IR_PKTDATA (AR2315_IR + 0x0000) ++ ++#define AR2315_IR_PKTLEN (AR2315_IR + 0x07fc) /* 0 - 63 */ ++ ++#define AR2315_IR_CONTROL (AR2315_IR + 0x0800) ++#define AR2315_IRCTL_TX 0x00000000 /* use as tranmitter */ ++#define AR2315_IRCTL_RX 0x00000001 /* use as receiver */ ++#define AR2315_IRCTL_SAMPLECLK_MASK 0x00003ffe /* Sample clk divisor mask */ ++#define AR2315_IRCTL_SAMPLECLK_SHFT 1 ++#define AR2315_IRCTL_OUTPUTCLK_MASK 0x03ffc000 /* Output clk divisor mask */ ++#define AR2315_IRCTL_OUTPUTCLK_SHFT 14 ++ ++#define AR2315_IR_STATUS (AR2315_IR + 0x0804) ++#define AR2315_IRSTS_RX 0x00000001 /* receive in progress */ ++#define AR2315_IRSTS_TX 0x00000002 /* transmit in progress */ ++ ++#define AR2315_IR_CONFIG (AR2315_IR + 0x0808) ++#define AR2315_IRCFG_INVIN 0x00000001 /* invert input polarity */ ++#define AR2315_IRCFG_INVOUT 0x00000002 /* invert output polarity */ ++#define AR2315_IRCFG_SEQ_START_WIN_SEL 0x00000004 /* 1 => 28, 0 => 7 */ ++#define AR2315_IRCFG_SEQ_START_THRESH 0x000000f0 /* */ ++#define AR2315_IRCFG_SEQ_END_UNIT_SEL 0x00000100 /* */ ++#define AR2315_IRCFG_SEQ_END_UNIT_THRESH 0x00007e00 /* */ ++#define AR2315_IRCFG_SEQ_END_WIN_SEL 0x00008000 /* */ ++#define AR2315_IRCFG_SEQ_END_WIN_THRESH 0x001f0000 /* */ ++#define AR2315_IRCFG_NUM_BACKOFF_WORDS 0x01e00000 /* */ ++ ++#define HOST_PCI_DEV_ID 3 ++#define HOST_PCI_MBAR0 0x10000000 ++#define HOST_PCI_MBAR1 0x20000000 ++#define HOST_PCI_MBAR2 0x30000000 ++ ++#define HOST_PCI_SDRAM_BASEADDR HOST_PCI_MBAR1 ++#define PCI_DEVICE_MEM_SPACE 0x800000 ++ ++#endif /* __AR2315_REG_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h +@@ -0,0 +1,236 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006 Felix Fietkau ++ */ ++ ++#ifndef AR5312_H ++#define AR5312_H ++ ++#include ++ ++/* ++ * IRQs ++ */ ++ ++#define AR5312_IRQ_WLAN0_INTRS MIPS_CPU_IRQ_BASE+2 /* C0_CAUSE: 0x0400 */ ++#define AR5312_IRQ_ENET0_INTRS MIPS_CPU_IRQ_BASE+3 /* C0_CAUSE: 0x0800 */ ++#define AR5312_IRQ_ENET1_INTRS MIPS_CPU_IRQ_BASE+4 /* C0_CAUSE: 0x1000 */ ++#define AR5312_IRQ_WLAN1_INTRS MIPS_CPU_IRQ_BASE+5 /* C0_CAUSE: 0x2000 */ ++#define AR5312_IRQ_MISC_INTRS MIPS_CPU_IRQ_BASE+6 /* C0_CAUSE: 0x4000 */ ++ ++ ++/* Address Map */ ++#define AR531X_WLAN0 0x18000000 ++#define AR531X_WLAN1 0x18500000 ++#define AR531X_ENET0 0x18100000 ++#define AR531X_ENET1 0x18200000 ++#define AR531X_SDRAMCTL 0x18300000 ++#define AR531X_FLASHCTL 0x18400000 ++#define AR531X_APBBASE 0x1c000000 ++#define AR531X_FLASH 0x1e000000 ++#define AR531X_UART0 0xbc000003 /* UART MMR */ ++ ++/* ++ * AR531X_NUM_ENET_MAC defines the number of ethernet MACs that ++ * should be considered available. The AR5312 supports 2 enet MACS, ++ * even though many reference boards only actually use 1 of them ++ * (i.e. Only MAC 0 is actually connected to an enet PHY or PHY switch. ++ * The AR2312 supports 1 enet MAC. ++ */ ++#define AR531X_NUM_ENET_MAC 2 ++ ++/* ++ * Need these defines to determine true number of ethernet MACs ++ */ ++#define AR5212_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ ++#define AR5212_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ ++#define AR5212_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ ++#define AR531X_RADIO_MASK_OFF 0xc8 ++#define AR531X_RADIO0_MASK 0x0003 ++#define AR531X_RADIO1_MASK 0x000c ++#define AR531X_RADIO1_S 2 ++ ++/* ++ * AR531X_NUM_WMAC defines the number of Wireless MACs that\ ++ * should be considered available. ++ */ ++#define AR531X_NUM_WMAC 2 ++ ++/* Reset/Timer Block Address Map */ ++#define AR531X_RESETTMR (AR531X_APBBASE + 0x3000) ++#define AR531X_TIMER (AR531X_RESETTMR + 0x0000) /* countdown timer */ ++#define AR531X_WD_CTRL (AR531X_RESETTMR + 0x0008) /* watchdog cntrl */ ++#define AR531X_WD_TIMER (AR531X_RESETTMR + 0x000c) /* watchdog timer */ ++#define AR531X_ISR (AR531X_RESETTMR + 0x0010) /* Intr Status Reg */ ++#define AR531X_IMR (AR531X_RESETTMR + 0x0014) /* Intr Mask Reg */ ++#define AR531X_RESET (AR531X_RESETTMR + 0x0020) ++#define AR5312_CLOCKCTL1 (AR531X_RESETTMR + 0x0064) ++#define AR5312_SCRATCH (AR531X_RESETTMR + 0x006c) ++#define AR531X_PROCADDR (AR531X_RESETTMR + 0x0070) ++#define AR531X_PROC1 (AR531X_RESETTMR + 0x0074) ++#define AR531X_DMAADDR (AR531X_RESETTMR + 0x0078) ++#define AR531X_DMA1 (AR531X_RESETTMR + 0x007c) ++#define AR531X_ENABLE (AR531X_RESETTMR + 0x0080) /* interface enb */ ++#define AR531X_REV (AR531X_RESETTMR + 0x0090) /* revision */ ++ ++/* AR531X_WD_CTRL register bit field definitions */ ++#define AR531X_WD_CTRL_IGNORE_EXPIRATION 0x0000 ++#define AR531X_WD_CTRL_NMI 0x0001 ++#define AR531X_WD_CTRL_RESET 0x0002 ++ ++/* AR531X_ISR register bit field definitions */ ++#define AR531X_ISR_NONE 0x0000 ++#define AR531X_ISR_TIMER 0x0001 ++#define AR531X_ISR_AHBPROC 0x0002 ++#define AR531X_ISR_AHBDMA 0x0004 ++#define AR531X_ISR_GPIO 0x0008 ++#define AR531X_ISR_UART0 0x0010 ++#define AR531X_ISR_UART0DMA 0x0020 ++#define AR531X_ISR_WD 0x0040 ++#define AR531X_ISR_LOCAL 0x0080 ++ ++/* AR531X_RESET register bit field definitions */ ++#define AR531X_RESET_SYSTEM 0x00000001 /* cold reset full system */ ++#define AR531X_RESET_PROC 0x00000002 /* cold reset MIPS core */ ++#define AR531X_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC and BB */ ++#define AR531X_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ ++#define AR531X_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ ++#define AR531X_RESET_ENET0 0x00000020 /* cold reset ENET0 mac */ ++#define AR531X_RESET_ENET1 0x00000040 /* cold reset ENET1 mac */ ++#define AR531X_RESET_UART0 0x00000100 /* cold reset UART0 (high speed) */ ++#define AR531X_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ ++#define AR531X_RESET_APB 0x00000400 /* cold reset APB (ar5312) */ ++#define AR531X_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ ++#define AR531X_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ ++#define AR531X_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BaseBand */ ++#define AR531X_RESET_NMI 0x00010000 /* send an NMI to the processor */ ++#define AR531X_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 mac */ ++#define AR531X_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 baseband */ ++#define AR531X_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ ++#define AR531X_RESET_WDOG 0x00100000 /* last reset was a watchdog */ ++ ++#define AR531X_RESET_WMAC0_BITS \ ++ AR531X_RESET_WLAN0 |\ ++ AR531X_RESET_WARM_WLAN0_MAC |\ ++ AR531X_RESET_WARM_WLAN0_BB ++ ++#define AR531X_RESERT_WMAC1_BITS \ ++ AR531X_RESET_WLAN1 |\ ++ AR531X_RESET_WARM_WLAN1_MAC |\ ++ AR531X_RESET_WARM_WLAN1_BB ++ ++/* AR5312_CLOCKCTL1 register bit field definitions */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR5312 and AR2312 */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR2313 */ ++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 ++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 ++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 ++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 ++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 ++ ++ ++/* AR531X_ENABLE register bit field definitions */ ++#define AR531X_ENABLE_WLAN0 0x0001 ++#define AR531X_ENABLE_ENET0 0x0002 ++#define AR531X_ENABLE_ENET1 0x0004 ++#define AR531X_ENABLE_UART_AND_WLAN1_PIO 0x0008 /* UART, and WLAN1 PIOs */ ++#define AR531X_ENABLE_WLAN1_DMA 0x0010 /* WLAN1 DMAs */ ++#define AR531X_ENABLE_WLAN1 \ ++ (AR531X_ENABLE_UART_AND_WLAN1_PIO | AR531X_ENABLE_WLAN1_DMA) ++ ++/* AR531X_REV register bit field definitions */ ++#define AR531X_REV_WMAC_MAJ 0xf000 ++#define AR531X_REV_WMAC_MAJ_S 12 ++#define AR531X_REV_WMAC_MIN 0x0f00 ++#define AR531X_REV_WMAC_MIN_S 8 ++#define AR531X_REV_MAJ 0x00f0 ++#define AR531X_REV_MAJ_S 4 ++#define AR531X_REV_MIN 0x000f ++#define AR531X_REV_MIN_S 0 ++#define AR531X_REV_CHIP (AR531X_REV_MAJ|AR531X_REV_MIN) ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define AR531X_REV_MAJ_AR5312 0x4 ++#define AR531X_REV_MAJ_AR2313 0x5 ++ ++/* Minor revision numbers, bits 3..0 of Revision ID register */ ++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ ++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ ++ ++/* AR531X_FLASHCTL register bit field definitions */ ++#define FLASHCTL_IDCY 0x0000000f /* Idle cycle turn around time */ ++#define FLASHCTL_IDCY_S 0 ++#define FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ ++#define FLASHCTL_WST1_S 5 ++#define FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ ++#define FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ ++#define FLASHCTL_WST2_S 11 ++#define FLASHCTL_AC 0x00070000 /* Flash address check (added) */ ++#define FLASHCTL_AC_S 16 ++#define FLASHCTL_AC_128K 0x00000000 ++#define FLASHCTL_AC_256K 0x00010000 ++#define FLASHCTL_AC_512K 0x00020000 ++#define FLASHCTL_AC_1M 0x00030000 ++#define FLASHCTL_AC_2M 0x00040000 ++#define FLASHCTL_AC_4M 0x00050000 ++#define FLASHCTL_AC_8M 0x00060000 ++#define FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ ++#define FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ ++#define FLASHCTL_BUSERR 0x01000000 /* Bus transfer error status flag */ ++#define FLASHCTL_WPERR 0x02000000 /* Write protect error status flag */ ++#define FLASHCTL_WP 0x04000000 /* Write protect */ ++#define FLASHCTL_BM 0x08000000 /* Burst mode */ ++#define FLASHCTL_MW 0x30000000 /* Memory width */ ++#define FLASHCTL_MWx8 0x00000000 /* Memory width x8 */ ++#define FLASHCTL_MWx16 0x10000000 /* Memory width x16 */ ++#define FLASHCTL_MWx32 0x20000000 /* Memory width x32 (not supported) */ ++#define FLASHCTL_ATNR 0x00000000 /* Access type == no retry */ ++#define FLASHCTL_ATR 0x80000000 /* Access type == retry every */ ++#define FLASHCTL_ATR4 0xc0000000 /* Access type == retry every 4 */ ++ ++/* ARM Flash Controller -- 3 flash banks with either x8 or x16 devices. */ ++#define AR531X_FLASHCTL0 (AR531X_FLASHCTL + 0x00) ++#define AR531X_FLASHCTL1 (AR531X_FLASHCTL + 0x04) ++#define AR531X_FLASHCTL2 (AR531X_FLASHCTL + 0x08) ++ ++/* ARM SDRAM Controller -- just enough to determine memory size */ ++#define AR531X_MEM_CFG1 (AR531X_SDRAMCTL + 0x04) ++#define MEM_CFG1_AC0 0x00000700 /* bank 0: SDRAM addr check (added) */ ++#define MEM_CFG1_AC0_S 8 ++#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ ++#define MEM_CFG1_AC1_S 12 ++ ++/* GPIO Address Map */ ++#define AR531X_GPIO (AR531X_APBBASE + 0x2000) ++#define AR531X_GPIO_DO (AR531X_GPIO + 0x00) /* output register */ ++#define AR531X_GPIO_DI (AR531X_GPIO + 0x04) /* intput register */ ++#define AR531X_GPIO_CR (AR531X_GPIO + 0x08) /* control register */ ++ ++/* GPIO Control Register bit field definitions */ ++#define AR531X_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR531X_GPIO_CR_O(x) (0 << (x)) /* mask for output */ ++#define AR531X_GPIO_CR_I(x) (1 << (x)) /* mask for input */ ++#define AR531X_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ ++#define AR531X_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ ++#define AR531X_NUM_GPIO 8 ++ ++ ++#endif ++ +--- /dev/null ++++ b/arch/mips/ar231x/ar5312.c +@@ -0,0 +1,563 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ */ ++ ++/* ++ * Platform devices for Atheros SoCs ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include "devices.h" ++#include "ar5312.h" ++ ++#define IS_5312() (current_cpu_data.cputype != CPU_4KEC) ++ ++static void ++ar5312_misc_irq_dispatch(void) ++{ ++ unsigned int ar231x_misc_intrs = ar231x_read_reg(AR531X_ISR) & ar231x_read_reg(AR531X_IMR); ++ ++ if (ar231x_misc_intrs & AR531X_ISR_TIMER) { ++ do_IRQ(AR531X_MISC_IRQ_TIMER); ++ (void)ar231x_read_reg(AR531X_TIMER); ++ } else if (ar231x_misc_intrs & AR531X_ISR_AHBPROC) ++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC); ++ else if ((ar231x_misc_intrs & AR531X_ISR_UART0)) ++ do_IRQ(AR531X_MISC_IRQ_UART0); ++ else if (ar231x_misc_intrs & AR531X_ISR_WD) ++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG); ++ else ++ do_IRQ(AR531X_MISC_IRQ_NONE); ++} ++ ++void ++ar5312_irq_dispatch(void) ++{ ++ int pending = read_c0_status() & read_c0_cause(); ++ ++ if (pending & CAUSEF_IP2) ++ do_IRQ(AR5312_IRQ_WLAN0_INTRS); ++ else if (pending & CAUSEF_IP3) ++ do_IRQ(AR5312_IRQ_ENET0_INTRS); ++ else if (pending & CAUSEF_IP4) ++ do_IRQ(AR5312_IRQ_ENET1_INTRS); ++ else if (pending & CAUSEF_IP5) ++ do_IRQ(AR5312_IRQ_WLAN1_INTRS); ++ else if (pending & CAUSEF_IP6) ++ ar5312_misc_irq_dispatch(); ++ else if (pending & CAUSEF_IP7) ++ do_IRQ(AR531X_IRQ_CPU_CLOCK); ++} ++ ++ ++/* Enable the specified AR531X_MISC_IRQ interrupt */ ++static void ++ar5312_misc_intr_enable(unsigned int irq) ++{ ++ unsigned int imr; ++ ++ imr = ar231x_read_reg(AR531X_IMR); ++ imr |= (1 << (irq - AR531X_MISC_IRQ_BASE - 1)); ++ ar231x_write_reg(AR531X_IMR, imr); ++} ++ ++/* Disable the specified AR531X_MISC_IRQ interrupt */ ++static void ++ar5312_misc_intr_disable(unsigned int irq) ++{ ++ unsigned int imr; ++ ++ imr = ar231x_read_reg(AR531X_IMR); ++ imr &= ~(1 << (irq - AR531X_MISC_IRQ_BASE - 1)); ++ ar231x_write_reg(AR531X_IMR, imr); ++ ar231x_read_reg(AR531X_IMR); /* flush write buffer */ ++} ++ ++static unsigned int ++ar5312_misc_intr_startup(unsigned int irq) ++{ ++ ar5312_misc_intr_enable(irq); ++ return 0; ++} ++ ++static void ++ar5312_misc_intr_end(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) ++ ar5312_misc_intr_enable(irq); ++} ++ ++static struct irq_chip ar5312_misc_intr_controller = { ++ .name = "AR5312-MISC", ++ .startup = ar5312_misc_intr_startup, ++ .shutdown = ar5312_misc_intr_disable, ++ .enable = ar5312_misc_intr_enable, ++ .disable = ar5312_misc_intr_disable, ++ .ack = ar5312_misc_intr_disable, ++ .end = ar5312_misc_intr_end, ++}; ++ ++ ++static irqreturn_t ar5312_ahb_proc_handler(int cpl, void *dev_id) ++{ ++ u32 proc1 = ar231x_read_reg(AR531X_PROC1); ++ u32 procAddr = ar231x_read_reg(AR531X_PROCADDR); /* clears error state */ ++ u32 dma1 = ar231x_read_reg(AR531X_DMA1); ++ u32 dmaAddr = ar231x_read_reg(AR531X_DMAADDR); /* clears error state */ ++ ++ printk("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", ++ procAddr, proc1, dmaAddr, dma1); ++ ++ machine_restart("AHB error"); /* Catastrophic failure */ ++ return IRQ_HANDLED; ++} ++ ++ ++static struct irqaction ar5312_ahb_proc_interrupt = { ++ .handler = ar5312_ahb_proc_handler, ++ .flags = IRQF_DISABLED, ++ .name = "ar5312_ahb_proc_interrupt", ++}; ++ ++ ++static struct irqaction cascade = { ++ .handler = no_action, ++ .flags = IRQF_DISABLED, ++ .name = "cascade", ++}; ++ ++void __init ar5312_irq_init(void) ++{ ++ int i; ++ ++ if (!IS_5312()) ++ return; ++ ++ ar231x_irq_dispatch = ar5312_irq_dispatch; ++ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) { ++ int irq = AR531X_MISC_IRQ_BASE + i; ++ irq_desc[irq].status = IRQ_DISABLED; ++ irq_desc[irq].action = NULL; ++ irq_desc[irq].depth = 1; ++ irq_desc[irq].chip = &ar5312_misc_intr_controller; ++ } ++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar5312_ahb_proc_interrupt); ++ setup_irq(AR5312_IRQ_MISC_INTRS, &cascade); ++} ++ ++const struct ar231x_gpiodev ar5312_gpiodev; ++ ++static u32 ++ar5312_gpio_get_output(void) ++{ ++ u32 reg; ++ reg = ~(ar231x_read_reg(AR531X_GPIO_CR)); ++ reg &= ar5312_gpiodev.valid_mask; ++ return reg; ++} ++ ++static u32 ++ar5312_gpio_set_output(u32 mask, u32 val) ++{ ++ u32 reg; ++ ++ reg = ar231x_read_reg(AR531X_GPIO_CR); ++ reg |= mask; ++ reg &= ~val; ++ ar231x_write_reg(AR531X_GPIO_CR, reg); ++ return reg; ++} ++ ++static u32 ++ar5312_gpio_get(void) ++{ ++ u32 reg; ++ reg = ar231x_read_reg(AR531X_GPIO_DI); ++ reg &= ar5312_gpiodev.valid_mask; ++ return reg; ++} ++ ++static u32 ++ar5312_gpio_set(u32 mask, u32 value) ++{ ++ u32 reg; ++ reg = ar231x_read_reg(AR531X_GPIO_DO); ++ reg &= ~mask; ++ reg |= value; ++ ar231x_write_reg(AR531X_GPIO_DO, reg); ++ return reg; ++} ++ ++const struct ar231x_gpiodev ar5312_gpiodev = { ++ .valid_mask = (1 << 8) - 1, ++ .get_output = ar5312_gpio_get_output, ++ .set_output = ar5312_gpio_set_output, ++ .get = ar5312_gpio_get, ++ .set = ar5312_gpio_set, ++}; ++ ++static struct physmap_flash_data ar5312_flash_data = { ++ .width = 2, ++}; ++ ++static struct resource ar5312_flash_resource = { ++ .start = AR531X_FLASH, ++ .end = AR531X_FLASH + 0x800000 - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct ar231x_eth ar5312_eth0_data = { ++ .reset_base = AR531X_RESET, ++ .reset_mac = AR531X_RESET_ENET0, ++ .reset_phy = AR531X_RESET_EPHY0, ++ .phy_base = KSEG1ADDR(AR531X_ENET0), ++ .config = &ar231x_board, ++}; ++ ++static struct ar231x_eth ar5312_eth1_data = { ++ .reset_base = AR531X_RESET, ++ .reset_mac = AR531X_RESET_ENET1, ++ .reset_phy = AR531X_RESET_EPHY1, ++ .phy_base = KSEG1ADDR(AR531X_ENET1), ++ .config = &ar231x_board, ++}; ++ ++static struct platform_device ar5312_physmap_flash = { ++ .name = "physmap-flash", ++ .id = 0, ++ .dev.platform_data = &ar5312_flash_data, ++ .resource = &ar5312_flash_resource, ++ .num_resources = 1, ++}; ++ ++#ifdef CONFIG_LEDS_GPIO ++static struct gpio_led ar5312_leds[] = { ++ { .name = "wlan", .gpio = 0, .active_low = 1, }, ++}; ++ ++static const struct gpio_led_platform_data ar5312_led_data = { ++ .num_leds = ARRAY_SIZE(ar5312_leds), ++ .leds = (void *) ar5312_leds, ++}; ++ ++static struct platform_device ar5312_gpio_leds = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev.platform_data = (void *) &ar5312_led_data, ++ .num_resources = 1, ++}; ++#endif ++ ++/* ++ * NB: This mapping size is larger than the actual flash size, ++ * but this shouldn't be a problem here, because the flash ++ * will simply be mapped multiple times. ++ */ ++static char __init *ar5312_flash_limit(void) ++{ ++ u32 ctl; ++ /* ++ * Configure flash bank 0. ++ * Assume 8M window size. Flash will be aliased if it's smaller ++ */ ++ ctl = FLASHCTL_E | ++ FLASHCTL_AC_8M | ++ FLASHCTL_RBLE | ++ (0x01 << FLASHCTL_IDCY_S) | ++ (0x07 << FLASHCTL_WST1_S) | ++ (0x07 << FLASHCTL_WST2_S) | ++ (ar231x_read_reg(AR531X_FLASHCTL0) & FLASHCTL_MW); ++ ++ ar231x_write_reg(AR531X_FLASHCTL0, ctl); ++ ++ /* Disable other flash banks */ ++ ar231x_write_reg(AR531X_FLASHCTL1, ++ ar231x_read_reg(AR531X_FLASHCTL1) & ~(FLASHCTL_E | FLASHCTL_AC)); ++ ++ ar231x_write_reg(AR531X_FLASHCTL2, ++ ar231x_read_reg(AR531X_FLASHCTL2) & ~(FLASHCTL_E | FLASHCTL_AC)); ++ ++ return (char *) KSEG1ADDR(AR531X_FLASH + 0x800000); ++} ++ ++int __init ar5312_init_devices(void) ++{ ++ struct ar231x_boarddata *config; ++ u32 fctl = 0; ++ const u8 *radio; ++ u8 *c; ++ ++ if (!IS_5312()) ++ return 0; ++ ++ /* Locate board/radio config data */ ++ ar231x_find_config(ar5312_flash_limit()); ++ config = ar231x_board.config; ++ ++ ++ /* ++ * Chip IDs and hardware detection for some Atheros ++ * models are really broken! ++ * ++ * Atheros uses a disabled WMAC0 and Silicon ID of AR5312 ++ * as indication for AR2312, which is otherwise ++ * indistinguishable from the real AR5312. ++ */ ++ if (ar231x_board.radio) { ++ radio = ar231x_board.radio + AR531X_RADIO_MASK_OFF; ++ if ((*((const u32 *) radio) & AR531X_RADIO0_MASK) == 0) ++ config->flags |= BD_ISCASPER; ++ } else ++ radio = NULL; ++ ++ /* AR2313 has CPU minor rev. 10 */ ++ if ((current_cpu_data.processor_id & 0xff) == 0x0a) ++ ar231x_devtype = DEV_TYPE_AR2313; ++ ++ /* AR2312 shares the same Silicon ID as AR5312 */ ++ else if (config->flags & BD_ISCASPER) ++ ar231x_devtype = DEV_TYPE_AR2312; ++ ++ /* Everything else is probably AR5312 or compatible */ ++ else ++ ar231x_devtype = DEV_TYPE_AR5312; ++ ++ /* fixup flash width */ ++ fctl = ar231x_read_reg(AR531X_FLASHCTL) & FLASHCTL_MW; ++ switch (fctl) { ++ case FLASHCTL_MWx16: ++ ar5312_flash_data.width = 2; ++ break; ++ case FLASHCTL_MWx8: ++ default: ++ ar5312_flash_data.width = 1; ++ break; ++ } ++ ++ platform_device_register(&ar5312_physmap_flash); ++ ++#ifdef CONFIG_LEDS_GPIO ++ ar5312_leds[0].gpio = config->sysLedGpio; ++ platform_device_register(&ar5312_gpio_leds); ++#endif ++ ++ /* Fix up MAC addresses if necessary */ ++ if (!memcmp(config->enet0_mac, "\xff\xff\xff\xff\xff\xff", 6)) ++ memcpy(config->enet0_mac, config->enet1_mac, 6); ++ ++ /* If ENET0 and ENET1 have the same mac address, ++ * increment the one from ENET1 */ ++ if (memcmp(config->enet0_mac, config->enet1_mac, 6) == 0) { ++ c = config->enet1_mac + 5; ++ while ((c >= config->enet1_mac) && !(++(*c))) ++ c--; ++ } ++ ++ switch(ar231x_devtype) { ++ case DEV_TYPE_AR5312: ++ ar5312_eth0_data.macaddr = config->enet0_mac; ++ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET0), ++ AR5312_IRQ_ENET0_INTRS, &ar5312_eth0_data); ++ ++ ar5312_eth1_data.macaddr = config->enet1_mac; ++ ar231x_add_ethernet(1, KSEG1ADDR(AR531X_ENET1), ++ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data); ++ ++ if (!ar231x_board.radio) ++ return 0; ++ ++ if (*((u32 *) ar231x_board.radio) & AR531X_RADIO0_MASK) ++ ar231x_add_wmac(0, AR531X_WLAN0, ++ AR5312_IRQ_WLAN0_INTRS); ++ ++ break; ++ /* ++ * AR2312/3 ethernet uses the PHY of ENET0, but the MAC ++ * of ENET1. Atheros calls it 'twisted' for a reason :) ++ */ ++ case DEV_TYPE_AR2312: ++ case DEV_TYPE_AR2313: ++ ar5312_eth1_data.phy_base = ar5312_eth0_data.phy_base; ++ ar5312_eth1_data.reset_phy = ar5312_eth0_data.reset_phy; ++ ar5312_eth1_data.macaddr = config->enet0_mac; ++ ar231x_add_ethernet(0, KSEG1ADDR(AR531X_ENET1), ++ AR5312_IRQ_ENET1_INTRS, &ar5312_eth1_data); ++ ++ if (!ar231x_board.radio) ++ return 0; ++ break; ++ default: ++ break; ++ } ++ ++ if (*((u32 *) ar231x_board.radio) & AR531X_RADIO1_MASK) ++ ar231x_add_wmac(1, AR531X_WLAN1, ++ AR5312_IRQ_WLAN1_INTRS); ++ ++ return 0; ++} ++ ++ ++static void ar5312_restart(char *command) ++{ ++ /* reset the system */ ++ local_irq_disable(); ++ while(1) { ++ ar231x_write_reg(AR531X_RESET, AR531X_RESET_SYSTEM); ++ } ++} ++ ++ ++/* ++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register ++ * to determine the predevisor value. ++ */ ++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { ++ 1, ++ 2, ++ 4, ++ 5 ++}; ++ ++ ++static int __init ++ar5312_cpu_frequency(void) ++{ ++ unsigned int result; ++ unsigned int predivide_mask, predivide_shift; ++ unsigned int multiplier_mask, multiplier_shift; ++ unsigned int clockCtl1, preDivideSelect, preDivisor, multiplier; ++ unsigned int doubler_mask; ++ u16 devid; ++ ++ /* Trust the bootrom's idea of cpu frequency. */ ++ if ((result = ar231x_read_reg(AR5312_SCRATCH))) ++ return result; ++ ++ devid = ar231x_board.devid; ++ devid &= AR531X_REV_MAJ; ++ devid >>= AR531X_REV_MAJ_S; ++ if (devid == AR531X_REV_MAJ_AR2313) { ++ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; ++ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; ++ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; ++ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; ++ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; ++ } else { /* AR5312 and AR2312 */ ++ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; ++ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; ++ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; ++ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; ++ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; ++ } ++ ++ /* ++ * Clocking is derived from a fixed 40MHz input clock. ++ * ++ * cpuFreq = InputClock * MULT (where MULT is PLL multiplier) ++ * sysFreq = cpuFreq / 4 (used for APB clock, serial, ++ * flash, Timer, Watchdog Timer) ++ * ++ * cntFreq = cpuFreq / 2 (use for CPU count/compare) ++ * ++ * So, for example, with a PLL multiplier of 5, we have ++ * ++ * cpuFreq = 200MHz ++ * sysFreq = 50MHz ++ * cntFreq = 100MHz ++ * ++ * We compute the CPU frequency, based on PLL settings. ++ */ ++ ++ clockCtl1 = ar231x_read_reg(AR5312_CLOCKCTL1); ++ preDivideSelect = (clockCtl1 & predivide_mask) >> predivide_shift; ++ preDivisor = CLOCKCTL1_PREDIVIDE_TABLE[preDivideSelect]; ++ multiplier = (clockCtl1 & multiplier_mask) >> multiplier_shift; ++ ++ if (clockCtl1 & doubler_mask) { ++ multiplier = multiplier << 1; ++ } ++ return (40000000 / preDivisor) * multiplier; ++} ++ ++static inline int ++ar5312_sys_frequency(void) ++{ ++ return ar5312_cpu_frequency() / 4; ++} ++ ++void __init ++ar5312_time_init(void) ++{ ++ if (!IS_5312()) ++ return; ++ ++ mips_hpt_frequency = ar5312_cpu_frequency() / 2; ++} ++ ++ ++void __init ++ar5312_prom_init(void) ++{ ++ u32 memsize, memcfg, bank0AC, bank1AC; ++ u32 devid; ++ ++ if (!IS_5312()) ++ return; ++ ++ devid = ar231x_read_reg(AR531X_REV); ++ devid &= AR531X_REV_MAJ | AR531X_REV_MIN; ++ ++ /* Detect memory size */ ++ memcfg = ar231x_read_reg(AR531X_MEM_CFG1); ++ bank0AC = (memcfg & MEM_CFG1_AC0) >> MEM_CFG1_AC0_S; ++ bank1AC = (memcfg & MEM_CFG1_AC1) >> MEM_CFG1_AC1_S; ++ memsize = (bank0AC ? (1 << (bank0AC+1)) : 0) ++ + (bank1AC ? (1 << (bank1AC+1)) : 0); ++ memsize <<= 20; ++ add_memory_region(0, memsize, BOOT_MEM_RAM); ++ ar231x_gpiodev = &ar5312_gpiodev; ++ ar231x_board.devid = (u16) devid; ++} ++ ++void __init ++ar5312_plat_setup(void) ++{ ++ if (!IS_5312()) ++ return; ++ ++ /* Clear any lingering AHB errors */ ++ ar231x_read_reg(AR531X_PROCADDR); ++ ar231x_read_reg(AR531X_DMAADDR); ++ ar231x_write_reg(AR531X_WD_CTRL, AR531X_WD_CTRL_IGNORE_EXPIRATION); ++ ++ _machine_restart = ar5312_restart; ++ ar231x_serial_setup(KSEG1ADDR(AR531X_UART0), ar5312_sys_frequency()); ++} ++ +--- /dev/null ++++ b/arch/mips/ar231x/pci.c +@@ -0,0 +1,231 @@ ++/* ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define AR531X_MEM_BASE 0x80800000UL ++#define AR531X_MEM_SIZE 0x00ffffffUL ++#define AR531X_IO_SIZE 0x00007fffUL ++ ++#define IS_2315() (current_cpu_data.cputype == CPU_4KEC) ++ ++static unsigned long configspace; ++ ++static int config_access(int devfn, int where, int size, u32 *ptr, bool write) ++{ ++ unsigned long flags; ++ int func = PCI_FUNC(devfn); ++ int dev = PCI_SLOT(devfn); ++ u32 value = 0; ++ int err = 0; ++ u32 addr; ++ ++ if (((dev != 0) && (dev != 3)) || (func > 2)) ++ return PCIBIOS_DEVICE_NOT_FOUND; ++ ++ /* Select Configuration access */ ++ local_irq_save(flags); ++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, 0, AR2315_PCIMISC_CFG_SEL); ++ mb(); ++ ++ addr = (u32) configspace + (1 << (13 + dev)) + (func << 8) + where; ++ if (size == 1) ++ addr ^= 0x3; ++ else if (size == 2) ++ addr ^= 0x2; ++ ++ if (write) { ++ value = *ptr; ++ if (size == 1) ++ err = put_dbe(value, (u8 *) addr); ++ else if (size == 2) ++ err = put_dbe(value, (u16 *) addr); ++ else if (size == 4) ++ err = put_dbe(value, (u32 *) addr); ++ } else { ++ if (size == 1) ++ err = get_dbe(value, (u8 *) addr); ++ else if (size == 2) ++ err = get_dbe(value, (u16 *) addr); ++ else if (size == 4) ++ err = get_dbe(value, (u32 *) addr); ++ if (err) ++ *ptr = 0xffffffff; ++ else ++ *ptr = value; ++ } ++ ++ /* Select Memory access */ ++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_CFG_SEL, 0); ++ local_irq_restore(flags); ++ ++ return (err ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL); ++} ++ ++static int ar231x_pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value) ++{ ++ return config_access(devfn, where, size, value, 0); ++} ++ ++static int ar231x_pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) ++{ ++ return config_access(devfn, where, size, &value, 1); ++} ++ ++struct pci_ops ar231x_pci_ops = { ++ .read = ar231x_pci_read, ++ .write = ar231x_pci_write, ++}; ++ ++static struct resource ar231x_mem_resource = { ++ .name = "AR531x PCI MEM", ++ .start = AR531X_MEM_BASE, ++ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE - 1 + 0x4000000, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource ar231x_io_resource = { ++ .name = "AR531x PCI I/O", ++ .start = AR531X_MEM_BASE + AR531X_MEM_SIZE - AR531X_IO_SIZE, ++ .end = AR531X_MEM_BASE + AR531X_MEM_SIZE - 1, ++ .flags = IORESOURCE_IO, ++}; ++ ++struct pci_controller ar231x_pci_controller = { ++ .pci_ops = &ar231x_pci_ops, ++ .mem_resource = &ar231x_mem_resource, ++ .io_resource = &ar231x_io_resource, ++ .mem_offset = 0x00000000UL, ++ .io_offset = 0x00000000UL, ++}; ++ ++int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ return AR2315_IRQ_LCBUS_PCI; ++} ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 5); ++ pci_write_config_word(dev, 0x40, 0); ++ ++ /* Clear any pending Abort or external Interrupts ++ * and enable interrupt processing */ ++ ar231x_mask_reg(AR2315_PCI_INTEN_REG, AR2315_PCI_INT_ENABLE, 0); ++ ar231x_write_reg(AR2315_PCI_INT_STATUS, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT)); ++ ar231x_write_reg(AR2315_PCI_INT_MASK, (AR2315_PCI_ABORT_INT | AR2315_PCI_EXT_INT)); ++ ar231x_mask_reg(AR2315_PCI_INTEN_REG, 0, AR2315_PCI_INT_ENABLE); ++ ++ return 0; ++} ++ ++static void ++ar2315_pci_fixup(struct pci_dev *dev) ++{ ++ unsigned int devfn = dev->devfn; ++ ++ if (dev->bus->number != 0) ++ return; ++ ++ /* Only fix up the PCI host settings */ ++ if ((PCI_SLOT(devfn) != 3) || (PCI_FUNC(devfn) != 0)) ++ return; ++ ++ /* Fix up MBARs */ ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, HOST_PCI_MBAR0); ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, HOST_PCI_MBAR1); ++ pci_write_config_dword(dev, PCI_BASE_ADDRESS_2, HOST_PCI_MBAR2); ++ pci_write_config_dword(dev, PCI_COMMAND, ++ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL | ++ PCI_COMMAND_INVALIDATE | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | ++ PCI_COMMAND_FAST_BACK); ++} ++DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, ar2315_pci_fixup); ++ ++static int __init ++ar2315_pci_init(void) ++{ ++ u32 reg; ++ ++ if (!IS_2315()) ++ return -ENODEV; ++ ++ configspace = (unsigned long) ioremap_nocache(0x80000000, 1*1024*1024); /* Remap PCI config space */ ++ ar231x_pci_controller.io_map_base = ++ (unsigned long) ioremap_nocache(AR531X_MEM_BASE + AR531X_MEM_SIZE, AR531X_IO_SIZE); ++ set_io_port_base(ar231x_pci_controller.io_map_base); /* PCI I/O space */ ++ ++ reg = ar231x_mask_reg(AR2315_RESET, 0, AR2315_RESET_PCIDMA); ++ msleep(10); ++ ++ reg &= ~AR2315_RESET_PCIDMA; ++ ar231x_write_reg(AR2315_RESET, reg); ++ msleep(10); ++ ++ ar231x_mask_reg(AR2315_ENDIAN_CTL, 0, ++ AR2315_CONFIG_PCIAHB | AR2315_CONFIG_PCIAHB_BRIDGE); ++ ++ ar231x_write_reg(AR2315_PCICLK, AR2315_PCICLK_PLLC_CLKM | ++ (AR2315_PCICLK_IN_FREQ_DIV_6 << AR2315_PCICLK_DIV_S)); ++ ar231x_mask_reg(AR2315_AHB_ARB_CTL, 0, AR2315_ARB_PCI); ++ ar231x_mask_reg(AR2315_IF_CTL, AR2315_IF_PCI_CLK_MASK | AR2315_IF_MASK, ++ AR2315_IF_PCI | AR2315_IF_PCI_HOST | AR2315_IF_PCI_INTR | ++ (AR2315_IF_PCI_CLK_OUTPUT_CLK << AR2315_IF_PCI_CLK_SHIFT)); ++ ++ /* Reset the PCI bus by setting bits 5-4 in PCI_MCFG */ ++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE, ++ AR2315_PCIRST_LOW); ++ msleep(100); ++ ++ /* Bring the PCI out of reset */ ++ ar231x_mask_reg(AR2315_PCI_MISC_CONFIG, AR2315_PCIMISC_RST_MODE, ++ AR2315_PCIRST_HIGH | AR2315_PCICACHE_DIS | 0x8); ++ ++ ar231x_write_reg(AR2315_PCI_UNCACHE_CFG, ++ 0x1E | /* 1GB uncached */ ++ (1 << 5) | /* Enable uncached */ ++ (0x2 << 30) /* Base: 0x80000000 */ ++ ); ++ ar231x_read_reg(AR2315_PCI_UNCACHE_CFG); ++ ++ msleep(500); ++ ++ /* dirty hack - anyone with a datasheet that knows the memory map ? */ ++ ioport_resource.start = 0x10000000; ++ ioport_resource.end = 0xffffffff; ++ iomem_resource.start = 0x10000000; ++ iomem_resource.end = 0xffffffff; ++ ++ register_pci_controller(&ar231x_pci_controller); ++ ++ return 0; ++} ++ ++arch_initcall(ar2315_pci_init); +--- /dev/null ++++ b/arch/mips/ar231x/ar2315.c +@@ -0,0 +1,688 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006 Felix Fietkau ++ */ ++ ++/* ++ * Platform devices for Atheros SoCs ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include "devices.h" ++#include "ar2315.h" ++ ++#define IS_2315() (current_cpu_data.cputype == CPU_4KEC) ++ ++static u32 gpiointmask = 0, gpiointval = 0; ++ ++static inline void ar2315_gpio_irq(void) ++{ ++ u32 pend; ++ int bit; ++ ++ /* only do one gpio interrupt at a time */ ++ pend = (ar231x_read_reg(AR2315_GPIO_DI) ^ gpiointval) & gpiointmask; ++ if (!pend) ++ return; ++ ++ bit = fls(pend); ++ pend ^= (1 << bit); ++ gpiointval ^= (1 << bit); ++ ++ /* ACK the interrupt only if we handled all bits */ ++ if (!pend) ++ ar231x_write_reg(AR2315_ISR, ar231x_read_reg(AR2315_IMR) | ~AR2315_ISR_GPIO); ++ ++ do_IRQ(AR531X_GPIO_IRQ_BASE + fls(pend) - 1); ++} ++ ++#ifdef CONFIG_ATHEROS_AR2315_PCI ++static inline void pci_abort_irq(void) ++{ ++ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_ABORT_INT); ++} ++ ++static inline void pci_ack_irq(void) ++{ ++ ar231x_write_reg(AR2315_PCI_INT_STATUS, AR2315_PCI_EXT_INT); ++} ++ ++void ar2315_pci_irq(int irq) ++{ ++ if (ar231x_read_reg(AR2315_PCI_INT_STATUS) == AR2315_PCI_ABORT_INT) ++ pci_abort_irq(); ++ else { ++ do_IRQ(irq); ++ pci_ack_irq(); ++ } ++} ++#endif /* CONFIG_ATHEROS_AR2315_PCI */ ++ ++/* ++ * Called when an interrupt is received, this function ++ * determines exactly which interrupt it was, and it ++ * invokes the appropriate handler. ++ * ++ * Implicitly, we also define interrupt priority by ++ * choosing which to dispatch first. ++ */ ++static void ++ar2315_irq_dispatch(void) ++{ ++ int pending = read_c0_status() & read_c0_cause(); ++ ++ if (pending & CAUSEF_IP3) ++ do_IRQ(AR2315_IRQ_WLAN0_INTRS); ++ else if (pending & CAUSEF_IP4) ++ do_IRQ(AR2315_IRQ_ENET0_INTRS); ++#ifdef CONFIG_ATHEROS_AR2315_PCI ++ else if (pending & CAUSEF_IP5) ++ ar2315_pci_irq(AR2315_IRQ_LCBUS_PCI); ++#endif ++ else if (pending & CAUSEF_IP2) { ++ unsigned int misc_intr = ar231x_read_reg(AR2315_ISR) & ar231x_read_reg(AR2315_IMR); ++ ++ if (misc_intr & AR2315_ISR_SPI) ++ do_IRQ(AR531X_MISC_IRQ_SPI); ++ else if (misc_intr & AR2315_ISR_TIMER) ++ do_IRQ(AR531X_MISC_IRQ_TIMER); ++ else if (misc_intr & AR2315_ISR_AHB) ++ do_IRQ(AR531X_MISC_IRQ_AHB_PROC); ++ else if (misc_intr & AR2315_ISR_GPIO) ++ ar2315_gpio_irq(); ++ else if (misc_intr & AR2315_ISR_UART0) ++ do_IRQ(AR531X_MISC_IRQ_UART0); ++ else if (misc_intr & AR2315_ISR_WD) ++ do_IRQ(AR531X_MISC_IRQ_WATCHDOG); ++ else ++ do_IRQ(AR531X_MISC_IRQ_NONE); ++ } else if (pending & CAUSEF_IP7) ++ do_IRQ(AR531X_IRQ_CPU_CLOCK); ++} ++ ++static void ar2315_set_gpiointmask(int gpio, int level) ++{ ++ u32 reg; ++ ++ ++ reg = ar231x_read_reg(AR2315_GPIO_INT); ++ reg &= ~(AR2315_GPIO_INT_M | AR2315_GPIO_INT_LVL_M); ++ reg |= gpio | AR2315_GPIO_INT_LVL(level); ++ ar231x_write_reg(AR2315_GPIO_INT, reg); ++} ++ ++static void ar2315_gpio_intr_enable(unsigned int irq) ++{ ++ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE; ++ u32 reg; ++ ++ gpiointmask &= ~(1 << gpio); ++ ++ /* reconfigure GPIO line as input */ ++ reg = ar231x_read_reg(AR2315_GPIO_CR); ++ reg &= ~(AR2315_GPIO_CR_M(gpio)); ++ reg |= AR2315_GPIO_CR_I(gpio); ++ ar231x_write_reg(AR2315_GPIO_CR, reg); ++ ++ /* Enable interrupt with edge detection */ ++ ar2315_set_gpiointmask(gpio, 3); ++} ++ ++static void ar2315_gpio_intr_disable(unsigned int irq) ++{ ++ unsigned int gpio = irq - AR531X_GPIO_IRQ_BASE; ++ ++ gpiointmask |= (1 << gpio); ++ ++ /* Disable interrupt */ ++ ar2315_set_gpiointmask(gpio, 0); ++} ++ ++static struct irq_chip ar2315_gpio_intr_controller = { ++ .typename = "AR2315-GPIO", ++ .disable = ar2315_gpio_intr_disable, ++ .ack = ar2315_gpio_intr_disable, ++ .mask_ack = ar2315_gpio_intr_disable, ++ .unmask = ar2315_gpio_intr_enable, ++ .eoi = ar2315_gpio_intr_enable, ++}; ++ ++static void ++ar2315_misc_intr_enable(unsigned int irq) ++{ ++ unsigned int imr; ++ ++ imr = ar231x_read_reg(AR2315_IMR); ++ switch(irq) { ++ case AR531X_MISC_IRQ_SPI: ++ imr |= AR2315_ISR_SPI; ++ break; ++ case AR531X_MISC_IRQ_TIMER: ++ imr |= AR2315_ISR_TIMER; ++ break; ++ case AR531X_MISC_IRQ_AHB_PROC: ++ imr |= AR2315_ISR_AHB; ++ break; ++ case AR531X_MISC_IRQ_GPIO: ++ imr |= AR2315_ISR_GPIO; ++ break; ++ case AR531X_MISC_IRQ_UART0: ++ imr |= AR2315_ISR_UART0; ++ break; ++ case AR531X_MISC_IRQ_WATCHDOG: ++ imr |= AR2315_ISR_WD; ++ break; ++ default: ++ break; ++ } ++ ar231x_write_reg(AR2315_IMR, imr); ++} ++ ++static void ++ar2315_misc_intr_disable(unsigned int irq) ++{ ++ unsigned int imr; ++ ++ imr = ar231x_read_reg(AR2315_IMR); ++ switch(irq) { ++ case AR531X_MISC_IRQ_SPI: ++ imr &= ~AR2315_ISR_SPI; ++ break; ++ case AR531X_MISC_IRQ_TIMER: ++ imr &= ~AR2315_ISR_TIMER; ++ break; ++ case AR531X_MISC_IRQ_AHB_PROC: ++ imr &= ~AR2315_ISR_AHB; ++ break; ++ case AR531X_MISC_IRQ_GPIO: ++ imr &= ~AR2315_ISR_GPIO; ++ break; ++ case AR531X_MISC_IRQ_UART0: ++ imr &= ~AR2315_ISR_UART0; ++ break; ++ case AR531X_MISC_IRQ_WATCHDOG: ++ imr &= ~AR2315_ISR_WD; ++ break; ++ default: ++ break; ++ } ++ ar231x_write_reg(AR2315_IMR, imr); ++} ++ ++static unsigned int ++ar2315_misc_intr_startup(unsigned int irq) ++{ ++ ar2315_misc_intr_enable(irq); ++ return 0; ++} ++ ++static void ++ar2315_misc_intr_end(unsigned int irq) ++{ ++ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) ++ ar2315_misc_intr_enable(irq); ++} ++ ++ ++static struct irq_chip ar2315_misc_intr_controller = { ++ .typename = "AR2315-MISC", ++ .startup = ar2315_misc_intr_startup, ++ .shutdown = ar2315_misc_intr_disable, ++ .enable = ar2315_misc_intr_enable, ++ .disable = ar2315_misc_intr_disable, ++ .ack = ar2315_misc_intr_disable, ++ .end = ar2315_misc_intr_end, ++}; ++ ++static irqreturn_t ar2315_ahb_proc_handler(int cpl, void *dev_id) ++{ ++ ar231x_write_reg(AR2315_AHB_ERR0, AHB_ERROR_DET); ++ ar231x_read_reg(AR2315_AHB_ERR1); ++ ++ printk(KERN_ERR "AHB fatal error\n"); ++ machine_restart("AHB error"); /* Catastrophic failure */ ++ ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction ar2315_ahb_proc_interrupt = { ++ .handler = ar2315_ahb_proc_handler, ++ .flags = IRQF_DISABLED, ++ .name = "ar2315_ahb_proc_interrupt", ++}; ++ ++static struct irqaction cascade = { ++ .handler = no_action, ++ .flags = IRQF_DISABLED, ++ .name = "cascade", ++}; ++ ++void ++ar2315_irq_init(void) ++{ ++ int i; ++ ++ ar231x_irq_dispatch = ar2315_irq_dispatch; ++ gpiointval = ar231x_read_reg(AR2315_GPIO_DI); ++ for (i = 0; i < AR531X_MISC_IRQ_COUNT; i++) { ++ int irq = AR531X_MISC_IRQ_BASE + i; ++ irq_desc[irq].status = IRQ_DISABLED; ++ irq_desc[irq].action = NULL; ++ irq_desc[irq].depth = 1; ++ irq_desc[irq].chip = &ar2315_misc_intr_controller; ++ } ++ for (i = 0; i < AR531X_GPIO_IRQ_COUNT; i++) { ++ int irq = AR531X_GPIO_IRQ_BASE + i; ++ irq_desc[irq].status = IRQ_DISABLED; ++ irq_desc[irq].action = NULL; ++ irq_desc[irq].depth = 1; ++ irq_desc[irq].chip = &ar2315_gpio_intr_controller; ++ } ++ setup_irq(AR531X_MISC_IRQ_GPIO, &cascade); ++ setup_irq(AR531X_MISC_IRQ_AHB_PROC, &ar2315_ahb_proc_interrupt); ++ setup_irq(AR2315_IRQ_MISC_INTRS, &cascade); ++} ++ ++const struct ar231x_gpiodev ar2315_gpiodev; ++ ++static u32 ++ar2315_gpio_get_output(void) ++{ ++ u32 reg; ++ reg = ar231x_read_reg(AR2315_GPIO_CR); ++ reg &= ar2315_gpiodev.valid_mask; ++ return reg; ++} ++ ++static u32 ++ar2315_gpio_set_output(u32 mask, u32 val) ++{ ++ u32 reg; ++ ++ reg = ar231x_read_reg(AR2315_GPIO_CR); ++ reg &= ~mask; ++ reg |= val; ++ ar231x_write_reg(AR2315_GPIO_CR, reg); ++ return reg; ++} ++ ++static u32 ++ar2315_gpio_get(void) ++{ ++ u32 reg; ++ reg = ar231x_read_reg(AR2315_GPIO_DI); ++ reg &= ar2315_gpiodev.valid_mask; ++ return reg; ++} ++ ++static u32 ++ar2315_gpio_set(u32 mask, u32 value) ++{ ++ u32 reg; ++ reg = ar231x_read_reg(AR2315_GPIO_DO); ++ reg &= ~mask; ++ reg |= value; ++ ar231x_write_reg(AR2315_GPIO_DO, reg); ++ return reg; ++} ++ ++const struct ar231x_gpiodev ar2315_gpiodev = { ++ .valid_mask = (1 << 22) - 1, ++ .get_output = ar2315_gpio_get_output, ++ .set_output = ar2315_gpio_set_output, ++ .get = ar2315_gpio_get, ++ .set = ar2315_gpio_set, ++}; ++ ++static struct ar231x_eth ar2315_eth_data = { ++ .reset_base = AR2315_RESET, ++ .reset_mac = AR2315_RESET_ENET0, ++ .reset_phy = AR2315_RESET_EPHY0, ++ .phy_base = AR2315_ENET0, ++ .config = &ar231x_board, ++}; ++ ++static struct resource ar2315_spiflash_res[] = { ++ { ++ .name = "flash_base", ++ .flags = IORESOURCE_MEM, ++ .start = KSEG1ADDR(AR2315_SPI_READ), ++ .end = KSEG1ADDR(AR2315_SPI_READ) + 0x1000000 - 1, ++ }, ++ { ++ .name = "flash_regs", ++ .flags = IORESOURCE_MEM, ++ .start = 0x11300000, ++ .end = 0x11300012, ++ }, ++}; ++ ++static struct platform_device ar2315_spiflash = { ++ .id = 0, ++ .name = "spiflash", ++ .resource = ar2315_spiflash_res, ++ .num_resources = ARRAY_SIZE(ar2315_spiflash_res) ++}; ++ ++static struct platform_device ar2315_wdt = { ++ .id = 0, ++ .name = "ar2315_wdt", ++}; ++ ++#define SPI_FLASH_CTL 0x00 ++#define SPI_FLASH_OPCODE 0x04 ++#define SPI_FLASH_DATA 0x08 ++ ++static inline u32 ++spiflash_read_reg(int reg) ++{ ++ return ar231x_read_reg(KSEG1ADDR(AR2315_SPI) + reg); ++} ++ ++static inline void ++spiflash_write_reg(int reg, u32 data) ++{ ++ ar231x_write_reg(KSEG1ADDR(AR2315_SPI) + reg, data); ++} ++ ++static u32 ++spiflash_wait_status(void) ++{ ++ u32 reg; ++ ++ do { ++ reg = spiflash_read_reg(SPI_FLASH_CTL); ++ } while (reg & SPI_CTL_BUSY); ++ ++ return reg; ++} ++ ++static u8 ++spiflash_probe(void) ++{ ++ u32 reg; ++ ++ reg = spiflash_wait_status(); ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= (1 << 4) | 4 | SPI_CTL_START; ++ ++ spiflash_write_reg(SPI_FLASH_OPCODE, 0xab); ++ spiflash_write_reg(SPI_FLASH_CTL, reg); ++ ++ reg = spiflash_wait_status(); ++ reg = spiflash_read_reg(SPI_FLASH_DATA); ++ reg &= 0xff; ++ ++ return (u8) reg; ++} ++ ++ ++#define STM_8MBIT_SIGNATURE 0x13 ++#define STM_16MBIT_SIGNATURE 0x14 ++#define STM_32MBIT_SIGNATURE 0x15 ++#define STM_64MBIT_SIGNATURE 0x16 ++#define STM_128MBIT_SIGNATURE 0x17 ++ ++static u8 __init * ++ar2315_flash_limit(void) ++{ ++ u32 flash_size = 0; ++ ++ /* probe the flash chip size */ ++ switch(spiflash_probe()) { ++ case STM_8MBIT_SIGNATURE: ++ flash_size = 0x00100000; ++ break; ++ case STM_16MBIT_SIGNATURE: ++ flash_size = 0x00200000; ++ break; ++ case STM_32MBIT_SIGNATURE: ++ flash_size = 0x00400000; ++ break; ++ case STM_64MBIT_SIGNATURE: ++ flash_size = 0x00800000; ++ break; ++ case STM_128MBIT_SIGNATURE: ++ flash_size = 0x01000000; ++ break; ++ } ++ ++ ar2315_spiflash_res[0].end = ar2315_spiflash_res[0].start + ++ flash_size - 1; ++ return (u8 *) ar2315_spiflash_res[0].end + 1; ++} ++ ++#ifdef CONFIG_LEDS_GPIO ++static struct gpio_led ar2315_leds[6]; ++static struct gpio_led_platform_data ar2315_led_data = { ++ .leds = (void *) ar2315_leds, ++}; ++ ++static struct platform_device ar2315_gpio_leds = { ++ .name = "leds-gpio", ++ .id = -1, ++ .dev = { ++ .platform_data = (void *) &ar2315_led_data, ++ } ++}; ++ ++static void __init ++ar2315_init_gpio(void) ++{ ++ static char led_names[6][6]; ++ int i, led = 0; ++ ++ ar2315_led_data.num_leds = 0; ++ for(i = 1; i < 8; i++) ++ { ++ if((i == AR2315_RESET_GPIO) || ++ (i == ar231x_board.config->resetConfigGpio)) ++ continue; ++ ++ if(i == ar231x_board.config->sysLedGpio) ++ strcpy(led_names[led], "wlan"); ++ else ++ sprintf(led_names[led], "gpio%d", i); ++ ++ ar2315_leds[led].name = led_names[led]; ++ ar2315_leds[led].gpio = i; ++ ar2315_leds[led].active_low = 0; ++ led++; ++ } ++ ar2315_led_data.num_leds = led; ++ platform_device_register(&ar2315_gpio_leds); ++} ++#else ++static inline void ar2315_init_gpio(void) ++{ ++} ++#endif ++ ++int __init ++ar2315_init_devices(void) ++{ ++ if (!IS_2315()) ++ return 0; ++ ++ /* Find board configuration */ ++ ar231x_find_config(ar2315_flash_limit()); ++ ar2315_eth_data.macaddr = ar231x_board.config->enet0_mac; ++ ++ ar2315_init_gpio(); ++ platform_device_register(&ar2315_wdt); ++ platform_device_register(&ar2315_spiflash); ++ ar231x_add_ethernet(0, AR2315_ENET0, AR2315_IRQ_ENET0_INTRS, ++ &ar2315_eth_data); ++ ar231x_add_wmac(0, AR2315_WLAN0, AR2315_IRQ_WLAN0_INTRS); ++ ++ return 0; ++} ++ ++static void ++ar2315_restart(char *command) ++{ ++ void (*mips_reset_vec)(void) = (void *) 0xbfc00000; ++ ++ local_irq_disable(); ++ ++ /* try reset the system via reset control */ ++ ar231x_write_reg(AR2315_COLD_RESET,AR2317_RESET_SYSTEM); ++ ++ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits a workaround. ++ * give it some time to attempt a gpio based hardware reset ++ * (atheros reference design workaround) */ ++ gpio_direction_output(AR2315_RESET_GPIO, 0); ++ mdelay(100); ++ ++ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic ++ * workaround. Attempt to jump to the mips reset location - ++ * the boot loader itself might be able to recover the system */ ++ mips_reset_vec(); ++} ++ ++ ++/* ++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register ++ * to determine the predevisor value. ++ */ ++static int __initdata CLOCKCTL1_PREDIVIDE_TABLE[4] = { ++ 1, ++ 2, ++ 4, ++ 5 ++}; ++ ++static int __initdata PLLC_DIVIDE_TABLE[5] = { ++ 2, ++ 3, ++ 4, ++ 6, ++ 3 ++}; ++ ++static unsigned int __init ++ar2315_sys_clk(unsigned int clockCtl) ++{ ++ unsigned int pllcCtrl,cpuDiv; ++ unsigned int pllcOut,refdiv,fdiv,divby2; ++ unsigned int clkDiv; ++ ++ pllcCtrl = ar231x_read_reg(AR2315_PLLC_CTL); ++ refdiv = (pllcCtrl & PLLC_REF_DIV_M) >> PLLC_REF_DIV_S; ++ refdiv = CLOCKCTL1_PREDIVIDE_TABLE[refdiv]; ++ fdiv = (pllcCtrl & PLLC_FDBACK_DIV_M) >> PLLC_FDBACK_DIV_S; ++ divby2 = (pllcCtrl & PLLC_ADD_FDBACK_DIV_M) >> PLLC_ADD_FDBACK_DIV_S; ++ divby2 += 1; ++ pllcOut = (40000000/refdiv)*(2*divby2)*fdiv; ++ ++ ++ /* clkm input selected */ ++ switch(clockCtl & CPUCLK_CLK_SEL_M) { ++ case 0: ++ case 1: ++ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKM_DIV_M) >> PLLC_CLKM_DIV_S]; ++ break; ++ case 2: ++ clkDiv = PLLC_DIVIDE_TABLE[(pllcCtrl & PLLC_CLKC_DIV_M) >> PLLC_CLKC_DIV_S]; ++ break; ++ default: ++ pllcOut = 40000000; ++ clkDiv = 1; ++ break; ++ } ++ cpuDiv = (clockCtl & CPUCLK_CLK_DIV_M) >> CPUCLK_CLK_DIV_S; ++ cpuDiv = cpuDiv * 2 ?: 1; ++ return (pllcOut/(clkDiv * cpuDiv)); ++} ++ ++static inline unsigned int ++ar2315_cpu_frequency(void) ++{ ++ return ar2315_sys_clk(ar231x_read_reg(AR2315_CPUCLK)); ++} ++ ++static inline unsigned int ++ar2315_apb_frequency(void) ++{ ++ return ar2315_sys_clk(ar231x_read_reg(AR2315_AMBACLK)); ++} ++ ++void __init ++ar2315_time_init(void) ++{ ++ mips_hpt_frequency = ar2315_cpu_frequency() / 2; ++} ++ ++void __init ++ar2315_prom_init(void) ++{ ++ u32 memsize, memcfg, devid; ++ ++ if (!IS_2315()) ++ return; ++ ++ memcfg = ar231x_read_reg(AR2315_MEM_CFG); ++ memsize = 1 + ((memcfg & SDRAM_DATA_WIDTH_M) >> SDRAM_DATA_WIDTH_S); ++ memsize <<= 1 + ((memcfg & SDRAM_COL_WIDTH_M) >> SDRAM_COL_WIDTH_S); ++ memsize <<= 1 + ((memcfg & SDRAM_ROW_WIDTH_M) >> SDRAM_ROW_WIDTH_S); ++ memsize <<= 3; ++ add_memory_region(0, memsize, BOOT_MEM_RAM); ++ ++ /* Detect the hardware based on the device ID */ ++ devid = ar231x_read_reg(AR2315_SREV) & AR2315_REV_CHIP; ++ switch(devid) { ++ case 0x90: ++ case 0x91: ++ ar231x_devtype = DEV_TYPE_AR2317; ++ break; ++ default: ++ ar231x_devtype = DEV_TYPE_AR2315; ++ break; ++ } ++ ar231x_gpiodev = &ar2315_gpiodev; ++ ar231x_board.devid = devid; ++} ++ ++void __init ++ar2315_plat_setup(void) ++{ ++ u32 config; ++ ++ if (!IS_2315()) ++ return; ++ ++ /* Clear any lingering AHB errors */ ++ config = read_c0_config(); ++ write_c0_config(config & ~0x3); ++ ar231x_write_reg(AR2315_AHB_ERR0,AHB_ERROR_DET); ++ ar231x_read_reg(AR2315_AHB_ERR1); ++ ar231x_write_reg(AR2315_WDC, AR2315_WDC_IGNORE_EXPIRATION); ++ ++ _machine_restart = ar2315_restart; ++ ar231x_serial_setup(KSEG1ADDR(AR2315_UART0), ar2315_apb_frequency()); ++} +--- /dev/null ++++ b/arch/mips/ar231x/ar2315.h +@@ -0,0 +1,37 @@ ++#ifndef __AR2315_H ++#define __AR2315_H ++ ++#ifdef CONFIG_ATHEROS_AR2315 ++ ++extern void ar2315_irq_init(void); ++extern int ar2315_init_devices(void); ++extern void ar2315_prom_init(void); ++extern void ar2315_plat_setup(void); ++extern void ar2315_time_init(void); ++ ++#else ++ ++static inline void ar2315_irq_init(void) ++{ ++} ++ ++static inline int ar2315_init_devices(void) ++{ ++ return 0; ++} ++ ++static inline void ar2315_prom_init(void) ++{ ++} ++ ++static inline void ar2315_plat_setup(void) ++{ ++} ++ ++static inline void ar2315_time_init(void) ++{ ++} ++ ++#endif ++ ++#endif +--- /dev/null ++++ b/arch/mips/ar231x/ar5312.h +@@ -0,0 +1,38 @@ ++#ifndef __AR5312_H ++#define __AR5312_H ++ ++#ifdef CONFIG_ATHEROS_AR5312 ++ ++extern void ar5312_irq_init(void); ++extern int ar5312_init_devices(void); ++extern void ar5312_prom_init(void); ++extern void ar5312_plat_setup(void); ++extern void ar5312_time_init(void); ++extern void ar5312_time_init(void); ++ ++#else ++ ++static inline void ar5312_irq_init(void) ++{ ++} ++ ++static inline int ar5312_init_devices(void) ++{ ++ return 0; ++} ++ ++static inline void ar5312_prom_init(void) ++{ ++} ++ ++static inline void ar5312_plat_setup(void) ++{ ++} ++ ++static inline void ar5312_time_init(void) ++{ ++} ++ ++#endif ++ ++#endif +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/ar231x.h +@@ -0,0 +1,54 @@ ++#ifndef __AR531X_H ++#define __AR531X_H ++ ++#define AR531X_MISC_IRQ_BASE 0x20 ++#define AR531X_GPIO_IRQ_BASE 0x30 ++ ++/* Software's idea of interrupts handled by "CPU Interrupt Controller" */ ++#define AR531X_IRQ_NONE MIPS_CPU_IRQ_BASE+0 ++#define AR531X_IRQ_CPU_CLOCK MIPS_CPU_IRQ_BASE+7 /* C0_CAUSE: 0x8000 */ ++ ++/* Miscellaneous interrupts, which share IP6 */ ++#define AR531X_MISC_IRQ_NONE AR531X_MISC_IRQ_BASE+0 ++#define AR531X_MISC_IRQ_TIMER AR531X_MISC_IRQ_BASE+1 ++#define AR531X_MISC_IRQ_AHB_PROC AR531X_MISC_IRQ_BASE+2 ++#define AR531X_MISC_IRQ_AHB_DMA AR531X_MISC_IRQ_BASE+3 ++#define AR531X_MISC_IRQ_GPIO AR531X_MISC_IRQ_BASE+4 ++#define AR531X_MISC_IRQ_UART0 AR531X_MISC_IRQ_BASE+5 ++#define AR531X_MISC_IRQ_UART0_DMA AR531X_MISC_IRQ_BASE+6 ++#define AR531X_MISC_IRQ_WATCHDOG AR531X_MISC_IRQ_BASE+7 ++#define AR531X_MISC_IRQ_LOCAL AR531X_MISC_IRQ_BASE+8 ++#define AR531X_MISC_IRQ_SPI AR531X_MISC_IRQ_BASE+9 ++#define AR531X_MISC_IRQ_COUNT 10 ++ ++/* GPIO Interrupts [0..7], share AR531X_MISC_IRQ_GPIO */ ++#define AR531X_GPIO_IRQ_NONE AR531X_GPIO_IRQ_BASE+0 ++#define AR531X_GPIO_IRQ(n) AR531X_GPIO_IRQ_BASE+n ++#define AR531X_GPIO_IRQ_COUNT 22 ++ ++static inline u32 ++ar231x_read_reg(u32 reg) ++{ ++ return __raw_readl((u32 *) reg); ++} ++ ++static inline void ++ar231x_write_reg(u32 reg, u32 val) ++{ ++ __raw_writel(val, (u32 *)reg); ++} ++ ++static inline u32 ++ar231x_mask_reg(u32 reg, u32 mask, u32 val) ++{ ++ u32 ret; ++ ++ ret = ar231x_read_reg(reg); ++ ret &= ~mask; ++ ret |= val; ++ ar231x_write_reg(reg, ret); ++ ++ return ret; ++} ++ ++#endif +--- /dev/null ++++ b/arch/mips/ar231x/devices.h +@@ -0,0 +1,27 @@ ++#ifndef __AR231X_DEVICES_H ++#define __AR231X_DEVICES_H ++ ++enum { ++ /* handled by ar5312.c */ ++ DEV_TYPE_AR2312, ++ DEV_TYPE_AR2313, ++ DEV_TYPE_AR5312, ++ ++ /* handled by ar2315.c */ ++ DEV_TYPE_AR2315, ++ DEV_TYPE_AR2316, ++ DEV_TYPE_AR2317, ++ ++ DEV_TYPE_UNKNOWN ++}; ++ ++extern int ar231x_devtype; ++extern struct ar231x_board_config ar231x_board; ++extern void (*ar231x_irq_dispatch)(void); ++ ++extern int ar231x_find_config(u8 *flash_limit); ++extern void ar231x_serial_setup(u32 mapbase, unsigned int uartclk); ++extern int ar231x_add_wmac(int nr, u32 base, int irq); ++extern int ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata); ++ ++#endif +--- /dev/null ++++ b/arch/mips/ar231x/devices.c +@@ -0,0 +1,174 @@ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include "devices.h" ++#include "ar5312.h" ++#include "ar2315.h" ++ ++struct ar231x_board_config ar231x_board; ++int ar231x_devtype = DEV_TYPE_UNKNOWN; ++const struct ar231x_gpiodev *ar231x_gpiodev; ++ ++static struct resource ar231x_eth0_res[] = { ++ { ++ .name = "eth0_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "eth0_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct resource ar231x_eth1_res[] = { ++ { ++ .name = "eth1_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "eth1_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device ar231x_eth[] = { ++ { ++ .id = 0, ++ .name = "ar231x-eth", ++ .resource = ar231x_eth0_res, ++ .num_resources = ARRAY_SIZE(ar231x_eth0_res) ++ }, ++ { ++ .id = 1, ++ .name = "ar231x-eth", ++ .resource = ar231x_eth1_res, ++ .num_resources = ARRAY_SIZE(ar231x_eth1_res) ++ } ++}; ++ ++static struct resource ar231x_wmac0_res[] = { ++ { ++ .name = "wmac0_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "wmac0_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct resource ar231x_wmac1_res[] = { ++ { ++ .name = "wmac1_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "wmac1_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++ ++static struct platform_device ar231x_wmac[] = { ++ { ++ .id = 0, ++ .name = "ar231x-wmac", ++ .resource = ar231x_wmac0_res, ++ .num_resources = ARRAY_SIZE(ar231x_wmac0_res), ++ .dev.platform_data = &ar231x_board, ++ }, ++ { ++ .id = 1, ++ .name = "ar231x-wmac", ++ .resource = ar231x_wmac1_res, ++ .num_resources = ARRAY_SIZE(ar231x_wmac1_res), ++ .dev.platform_data = &ar231x_board, ++ }, ++}; ++ ++static const char *devtype_strings[] = { ++ [DEV_TYPE_AR5312] = "Atheros AR5312", ++ [DEV_TYPE_AR2312] = "Atheros AR2312", ++ [DEV_TYPE_AR2313] = "Atheros AR2313", ++ [DEV_TYPE_AR2315] = "Atheros AR2315", ++ [DEV_TYPE_AR2316] = "Atheros AR2316", ++ [DEV_TYPE_AR2317] = "Atheros AR2317", ++ [DEV_TYPE_UNKNOWN] = "Atheros (unknown)", ++}; ++ ++const char *get_system_type(void) ++{ ++ if ((ar231x_devtype >= ARRAY_SIZE(devtype_strings)) || ++ !devtype_strings[ar231x_devtype]) ++ return devtype_strings[DEV_TYPE_UNKNOWN]; ++ return devtype_strings[ar231x_devtype]; ++} ++ ++ ++int __init ++ar231x_add_ethernet(int nr, u32 base, int irq, void *pdata) ++{ ++ struct resource *res; ++ ++ ar231x_eth[nr].dev.platform_data = pdata; ++ res = &ar231x_eth[nr].resource[0]; ++ res->start = base; ++ res->end = base + 0x2000 - 1; ++ res++; ++ res->start = irq; ++ res->end = irq; ++ return platform_device_register(&ar231x_eth[nr]); ++} ++ ++void __init ++ar231x_serial_setup(u32 mapbase, unsigned int uartclk) ++{ ++ struct uart_port s; ++ ++ memset(&s, 0, sizeof(s)); ++ ++ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; ++ s.iotype = UPIO_MEM; ++ s.irq = AR531X_MISC_IRQ_UART0; ++ s.regshift = 2; ++ s.mapbase = mapbase; ++ s.uartclk = uartclk; ++ s.membase = (void __iomem *)s.mapbase; ++ ++ early_serial_setup(&s); ++} ++ ++int __init ++ar231x_add_wmac(int nr, u32 base, int irq) ++{ ++ struct resource *res; ++ ++ ar231x_wmac[nr].dev.platform_data = &ar231x_board; ++ res = &ar231x_wmac[nr].resource[0]; ++ res->start = base; ++ res->end = base + 0x10000 - 1; ++ res++; ++ res->start = irq; ++ res->end = irq; ++ return platform_device_register(&ar231x_wmac[nr]); ++} ++ ++static int __init ar231x_register_devices(void) ++{ ++ static struct resource res = { ++ .start = 0xFFFFFFFF, ++ }; ++ ++ platform_device_register_simple("GPIODEV", 0, &res, 1); ++ ar5312_init_devices(); ++ ar2315_init_devices(); ++ ++ return 0; ++} ++ ++device_initcall(ar231x_register_devices); diff --git a/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch new file mode 100644 index 0000000000..ea61bcd3e3 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch @@ -0,0 +1,1600 @@ +--- a/drivers/net/Kconfig ++++ b/drivers/net/Kconfig +@@ -359,6 +359,12 @@ config AX88796_93CX6 + help + Select this if your platform comes with an external 93CX6 eeprom. + ++config AR231X_ETHERNET ++ tristate "AR231x Ethernet support" ++ depends on NET_ETHERNET && ATHEROS ++ help ++ Support for the AR231x/531x ethernet controller ++ + config MACE + tristate "MACE (Power Mac ethernet) support" + depends on PPC_PMAC && PPC32 +--- a/drivers/net/Makefile ++++ b/drivers/net/Makefile +@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o + obj-$(CONFIG_KORINA) += korina.o + obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o + obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o ++obj-$(CONFIG_AR231X_ETHERNET) += ar231x.o + obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o + obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o + obj-$(CONFIG_DECLANCE) += declance.o +--- /dev/null ++++ b/drivers/net/ar231x.c +@@ -0,0 +1,1267 @@ ++/* ++ * ar231x.c: Linux driver for the Atheros AR231x Ethernet device. ++ * ++ * Copyright (C) 2004 by Sameer Dekate ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * Thanks to Atheros for providing hardware and documentation ++ * enabling me to write this driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * Additional credits: ++ * This code is taken from John Taylor's Sibyte driver and then ++ * modified for the AR2313. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define AR2313_MTU 1692 ++#define AR2313_PRIOS 1 ++#define AR2313_QUEUES (2*AR2313_PRIOS) ++#define AR2313_DESCR_ENTRIES 64 ++ ++ ++#ifndef min ++#define min(a,b) (((a)<(b))?(a):(b)) ++#endif ++ ++#ifndef SMP_CACHE_BYTES ++#define SMP_CACHE_BYTES L1_CACHE_BYTES ++#endif ++ ++#define AR2313_MBOX_SET_BIT 0x8 ++ ++#include "ar231x.h" ++ ++/* ++ * New interrupt handler strategy: ++ * ++ * An old interrupt handler worked using the traditional method of ++ * replacing an skbuff with a new one when a packet arrives. However ++ * the rx rings do not need to contain a static number of buffer ++ * descriptors, thus it makes sense to move the memory allocation out ++ * of the main interrupt handler and do it in a bottom half handler ++ * and only allocate new buffers when the number of buffers in the ++ * ring is below a certain threshold. In order to avoid starving the ++ * NIC under heavy load it is however necessary to force allocation ++ * when hitting a minimum threshold. The strategy for alloction is as ++ * follows: ++ * ++ * RX_LOW_BUF_THRES - allocate buffers in the bottom half ++ * RX_PANIC_LOW_THRES - we are very low on buffers, allocate ++ * the buffers in the interrupt handler ++ * RX_RING_THRES - maximum number of buffers in the rx ring ++ * ++ * One advantagous side effect of this allocation approach is that the ++ * entire rx processing can be done without holding any spin lock ++ * since the rx rings and registers are totally independent of the tx ++ * ring and its registers. This of course includes the kmalloc's of ++ * new skb's. Thus start_xmit can run in parallel with rx processing ++ * and the memory allocation on SMP systems. ++ * ++ * Note that running the skb reallocation in a bottom half opens up ++ * another can of races which needs to be handled properly. In ++ * particular it can happen that the interrupt handler tries to run ++ * the reallocation while the bottom half is either running on another ++ * CPU or was interrupted on the same CPU. To get around this the ++ * driver uses bitops to prevent the reallocation routines from being ++ * reentered. ++ * ++ * TX handling can also be done without holding any spin lock, wheee ++ * this is fun! since tx_csm is only written to by the interrupt ++ * handler. ++ */ ++ ++/* ++ * Threshold values for RX buffer allocation - the low water marks for ++ * when to start refilling the rings are set to 75% of the ring ++ * sizes. It seems to make sense to refill the rings entirely from the ++ * intrrupt handler once it gets below the panic threshold, that way ++ * we don't risk that the refilling is moved to another CPU when the ++ * one running the interrupt handler just got the slab code hot in its ++ * cache. ++ */ ++#define RX_RING_SIZE AR2313_DESCR_ENTRIES ++#define RX_PANIC_THRES (RX_RING_SIZE/4) ++#define RX_LOW_THRES ((3*RX_RING_SIZE)/4) ++#define CRC_LEN 4 ++#define RX_OFFSET 2 ++ ++#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) ++#define VLAN_HDR 4 ++#else ++#define VLAN_HDR 0 ++#endif ++ ++#define AR2313_BUFSIZE (AR2313_MTU + VLAN_HDR + ETH_HLEN + CRC_LEN + RX_OFFSET) ++ ++#ifdef MODULE ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Sameer Dekate , Imre Kaloz , Felix Fietkau "); ++MODULE_DESCRIPTION("AR231x Ethernet driver"); ++#endif ++ ++#define virt_to_phys(x) ((u32)(x) & 0x1fffffff) ++ ++// prototypes ++static void ar231x_halt(struct net_device *dev); ++static void rx_tasklet_func(unsigned long data); ++static void rx_tasklet_cleanup(struct net_device *dev); ++static void ar231x_multicast_list(struct net_device *dev); ++ ++static int ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); ++static int ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); ++static int ar231x_mdiobus_reset(struct mii_bus *bus); ++static int ar231x_mdiobus_probe (struct net_device *dev); ++static void ar231x_adjust_link(struct net_device *dev); ++ ++#ifndef ERR ++#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args) ++#endif ++ ++ ++int __init ar231x_probe(struct platform_device *pdev) ++{ ++ struct net_device *dev; ++ struct ar231x_private *sp; ++ struct resource *res; ++ unsigned long ar_eth_base; ++ char buf[64]; ++ ++ dev = alloc_etherdev(sizeof(struct ar231x_private)); ++ ++ if (dev == NULL) { ++ printk(KERN_ERR ++ "ar231x: Unable to allocate net_device structure!\n"); ++ return -ENOMEM; ++ } ++ ++ platform_set_drvdata(pdev, dev); ++ ++ sp = netdev_priv(dev); ++ sp->dev = dev; ++ sp->cfg = pdev->dev.platform_data; ++ ++ sprintf(buf, "eth%d_membase", pdev->id); ++ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, buf); ++ if (!res) ++ return -ENODEV; ++ ++ sp->link = 0; ++ ar_eth_base = res->start; ++ ++ sprintf(buf, "eth%d_irq", pdev->id); ++ dev->irq = platform_get_irq_byname(pdev, buf); ++ ++ spin_lock_init(&sp->lock); ++ ++ /* initialize func pointers */ ++ dev->open = &ar231x_open; ++ dev->stop = &ar231x_close; ++ dev->hard_start_xmit = &ar231x_start_xmit; ++ ++ dev->set_multicast_list = &ar231x_multicast_list; ++ dev->do_ioctl = &ar231x_ioctl; ++ ++ // SAMEER: do we need this? ++ dev->features |= NETIF_F_HIGHDMA; ++ ++ tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev); ++ tasklet_disable(&sp->rx_tasklet); ++ ++ sp->eth_regs = ++ ioremap_nocache(virt_to_phys(ar_eth_base), sizeof(*sp->eth_regs)); ++ if (!sp->eth_regs) { ++ printk("Can't remap eth registers\n"); ++ return (-ENXIO); ++ } ++ ++ /* ++ * When there's only one MAC, PHY regs are typically on ENET0, ++ * even though the MAC might be on ENET1. ++ * Needto remap PHY regs separately in this case ++ */ ++ if (virt_to_phys(ar_eth_base) == virt_to_phys(sp->phy_regs)) ++ sp->phy_regs = sp->eth_regs; ++ else { ++ sp->phy_regs = ++ ioremap_nocache(virt_to_phys(sp->cfg->phy_base), ++ sizeof(*sp->phy_regs)); ++ if (!sp->phy_regs) { ++ printk("Can't remap phy registers\n"); ++ return (-ENXIO); ++ } ++ } ++ ++ sp->dma_regs = ++ ioremap_nocache(virt_to_phys(ar_eth_base + 0x1000), ++ sizeof(*sp->dma_regs)); ++ dev->base_addr = (unsigned int) sp->dma_regs; ++ if (!sp->dma_regs) { ++ printk("Can't remap DMA registers\n"); ++ return (-ENXIO); ++ } ++ ++ sp->int_regs = ioremap_nocache(virt_to_phys(sp->cfg->reset_base), 4); ++ if (!sp->int_regs) { ++ printk("Can't remap INTERRUPT registers\n"); ++ return (-ENXIO); ++ } ++ ++ strncpy(sp->name, "Atheros AR231x", sizeof(sp->name) - 1); ++ sp->name[sizeof(sp->name) - 1] = '\0'; ++ memcpy(dev->dev_addr, sp->cfg->macaddr, 6); ++ ++ if (ar231x_init(dev)) { ++ /* ++ * ar231x_init() calls ar231x_init_cleanup() on error. ++ */ ++ kfree(dev); ++ return -ENODEV; ++ } ++ ++ if (register_netdev(dev)) { ++ printk("%s: register_netdev failed\n", __func__); ++ return -1; ++ } ++ ++ printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n", ++ dev->name, sp->name, ++ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], ++ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq); ++ ++ sp->mii_bus = mdiobus_alloc(); ++ if (sp->mii_bus == NULL) ++ return -1; ++ ++ sp->mii_bus->priv = dev; ++ sp->mii_bus->read = ar231x_mdiobus_read; ++ sp->mii_bus->write = ar231x_mdiobus_write; ++ sp->mii_bus->reset = ar231x_mdiobus_reset; ++ sp->mii_bus->name = "ar231x_eth_mii"; ++ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0"); ++ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL); ++ *sp->mii_bus->irq = PHY_POLL; ++ ++ mdiobus_register(sp->mii_bus); ++ ++ if (ar231x_mdiobus_probe(dev) != 0) { ++ printk(KERN_ERR "ar231x: mdiobus_probe failed"); ++ rx_tasklet_cleanup(dev); ++ ar231x_init_cleanup(dev); ++ unregister_netdev(dev); ++ kfree(dev); ++ } else { ++ /* start link poll timer */ ++ ar231x_setup_timer(dev); ++ } ++ ++ return 0; ++} ++ ++ ++static void ar231x_multicast_list(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int filter; ++ ++ filter = sp->eth_regs->mac_control; ++ ++ if (dev->flags & IFF_PROMISC) ++ filter |= MAC_CONTROL_PR; ++ else ++ filter &= ~MAC_CONTROL_PR; ++ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 0)) ++ filter |= MAC_CONTROL_PM; ++ else ++ filter &= ~MAC_CONTROL_PM; ++ ++ sp->eth_regs->mac_control = filter; ++} ++ ++static void rx_tasklet_cleanup(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ /* ++ * Tasklet may be scheduled. Need to get it removed from the list ++ * since we're about to free the struct. ++ */ ++ ++ sp->unloading = 1; ++ tasklet_enable(&sp->rx_tasklet); ++ tasklet_kill(&sp->rx_tasklet); ++} ++ ++static int __exit ar231x_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ struct ar231x_private *sp = netdev_priv(dev); ++ rx_tasklet_cleanup(dev); ++ ar231x_init_cleanup(dev); ++ unregister_netdev(dev); ++ mdiobus_unregister(sp->mii_bus); ++ mdiobus_free(sp->mii_bus); ++ kfree(dev); ++ return 0; ++} ++ ++ ++/* ++ * Restart the AR2313 ethernet controller. ++ */ ++static int ar231x_restart(struct net_device *dev) ++{ ++ /* disable interrupts */ ++ disable_irq(dev->irq); ++ ++ /* stop mac */ ++ ar231x_halt(dev); ++ ++ /* initialize */ ++ ar231x_init(dev); ++ ++ /* enable interrupts */ ++ enable_irq(dev->irq); ++ ++ return 0; ++} ++ ++static struct platform_driver ar231x_driver = { ++ .driver.name = "ar231x-eth", ++ .probe = ar231x_probe, ++ .remove = ar231x_remove, ++}; ++ ++int __init ar231x_module_init(void) ++{ ++ return platform_driver_register(&ar231x_driver); ++} ++ ++void __exit ar231x_module_cleanup(void) ++{ ++ platform_driver_unregister(&ar231x_driver); ++} ++ ++module_init(ar231x_module_init); ++module_exit(ar231x_module_cleanup); ++ ++ ++static void ar231x_free_descriptors(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ if (sp->rx_ring != NULL) { ++ kfree((void *) KSEG0ADDR(sp->rx_ring)); ++ sp->rx_ring = NULL; ++ sp->tx_ring = NULL; ++ } ++} ++ ++ ++static int ar231x_allocate_descriptors(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ int size; ++ int j; ++ ar231x_descr_t *space; ++ ++ if (sp->rx_ring != NULL) { ++ printk("%s: already done.\n", __FUNCTION__); ++ return 0; ++ } ++ ++ size = ++ (sizeof(ar231x_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES)); ++ space = kmalloc(size, GFP_KERNEL); ++ if (space == NULL) ++ return 1; ++ ++ /* invalidate caches */ ++ dma_cache_inv((unsigned int) space, size); ++ ++ /* now convert pointer to KSEG1 */ ++ space = (ar231x_descr_t *) KSEG1ADDR(space); ++ ++ memset((void *) space, 0, size); ++ ++ sp->rx_ring = space; ++ space += AR2313_DESCR_ENTRIES; ++ ++ sp->tx_ring = space; ++ space += AR2313_DESCR_ENTRIES; ++ ++ /* Initialize the transmit Descriptors */ ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ ar231x_descr_t *td = &sp->tx_ring[j]; ++ td->status = 0; ++ td->devcs = DMA_TX1_CHAINED; ++ td->addr = 0; ++ td->descr = ++ virt_to_phys(&sp-> ++ tx_ring[(j + 1) & (AR2313_DESCR_ENTRIES - 1)]); ++ } ++ ++ return 0; ++} ++ ++ ++/* ++ * Generic cleanup handling data allocated during init. Used when the ++ * module is unloaded or if an error occurs during initialization ++ */ ++static void ar231x_init_cleanup(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ struct sk_buff *skb; ++ int j; ++ ++ ar231x_free_descriptors(dev); ++ ++ if (sp->eth_regs) ++ iounmap((void *) sp->eth_regs); ++ if (sp->dma_regs) ++ iounmap((void *) sp->dma_regs); ++ ++ if (sp->rx_skb) { ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ skb = sp->rx_skb[j]; ++ if (skb) { ++ sp->rx_skb[j] = NULL; ++ dev_kfree_skb(skb); ++ } ++ } ++ kfree(sp->rx_skb); ++ sp->rx_skb = NULL; ++ } ++ ++ if (sp->tx_skb) { ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ skb = sp->tx_skb[j]; ++ if (skb) { ++ sp->tx_skb[j] = NULL; ++ dev_kfree_skb(skb); ++ } ++ } ++ kfree(sp->tx_skb); ++ sp->tx_skb = NULL; ++ } ++} ++ ++static int ar231x_setup_timer(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ init_timer(&sp->link_timer); ++ ++ sp->link_timer.function = ar231x_link_timer_fn; ++ sp->link_timer.data = (int) dev; ++ sp->link_timer.expires = jiffies + HZ; ++ ++ add_timer(&sp->link_timer); ++ return 0; ++ ++} ++ ++static void ar231x_link_timer_fn(unsigned long data) ++{ ++ struct net_device *dev = (struct net_device *) data; ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ // see if the link status changed ++ // This was needed to make sure we set the PHY to the ++ // autonegotiated value of half or full duplex. ++ ar231x_check_link(dev); ++ ++ // Loop faster when we don't have link. ++ // This was needed to speed up the AP bootstrap time. ++ if (sp->link == 0) { ++ mod_timer(&sp->link_timer, jiffies + HZ / 2); ++ } else { ++ mod_timer(&sp->link_timer, jiffies + LINK_TIMER); ++ } ++} ++ ++static void ar231x_check_link(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ u16 phyData; ++ ++ phyData = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); ++ if (sp->phyData != phyData) { ++ if (phyData & BMSR_LSTATUS) { ++ /* link is present, ready link partner ability to deterine ++ duplexity */ ++ int duplex = 0; ++ u16 reg; ++ ++ sp->link = 1; ++ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR); ++ if (reg & BMCR_ANENABLE) { ++ /* auto neg enabled */ ++ reg = ar231x_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA); ++ duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0; ++ } else { ++ /* no auto neg, just read duplex config */ ++ duplex = (reg & BMCR_FULLDPLX) ? 1 : 0; ++ } ++ ++ printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", ++ dev->name, (duplex) ? "full" : "half"); ++ ++ if (duplex) { ++ /* full duplex */ ++ sp->eth_regs->mac_control = ++ ((sp->eth_regs-> ++ mac_control | MAC_CONTROL_F) & ~MAC_CONTROL_DRO); ++ } else { ++ /* half duplex */ ++ sp->eth_regs->mac_control = ++ ((sp->eth_regs-> ++ mac_control | MAC_CONTROL_DRO) & ~MAC_CONTROL_F); ++ } ++ } else { ++ /* no link */ ++ sp->link = 0; ++ } ++ sp->phyData = phyData; ++ } ++} ++ ++static int ar231x_reset_reg(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int ethsal, ethsah; ++ unsigned int flags; ++ ++ *sp->int_regs |= sp->cfg->reset_mac; ++ mdelay(10); ++ *sp->int_regs &= ~sp->cfg->reset_mac; ++ mdelay(10); ++ *sp->int_regs |= sp->cfg->reset_phy; ++ mdelay(10); ++ *sp->int_regs &= ~sp->cfg->reset_phy; ++ mdelay(10); ++ ++ sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR); ++ mdelay(10); ++ sp->dma_regs->bus_mode = ++ ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE); ++ ++ /* enable interrupts */ ++ sp->dma_regs->intr_ena = (DMA_STATUS_AIS | ++ DMA_STATUS_NIS | ++ DMA_STATUS_RI | ++ DMA_STATUS_TI | DMA_STATUS_FBE); ++ sp->dma_regs->xmt_base = virt_to_phys(sp->tx_ring); ++ sp->dma_regs->rcv_base = virt_to_phys(sp->rx_ring); ++ sp->dma_regs->control = ++ (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF); ++ ++ sp->eth_regs->flow_control = (FLOW_CONTROL_FCE); ++ sp->eth_regs->vlan_tag = (0x8100); ++ ++ /* Enable Ethernet Interface */ ++ flags = (MAC_CONTROL_TE | /* transmit enable */ ++ MAC_CONTROL_PM | /* pass mcast */ ++ MAC_CONTROL_F | /* full duplex */ ++ MAC_CONTROL_HBD); /* heart beat disabled */ ++ ++ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */ ++ flags |= MAC_CONTROL_PR; ++ } ++ sp->eth_regs->mac_control = flags; ++ ++ /* Set all Ethernet station address registers to their initial values */ ++ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); ++ ++ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | ++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | ++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); ++ ++ sp->eth_regs->mac_addr[0] = ethsah; ++ sp->eth_regs->mac_addr[1] = ethsal; ++ ++ mdelay(10); ++ ++ return (0); ++} ++ ++ ++static int ar231x_init(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ int ecode = 0; ++ ++ /* ++ * Allocate descriptors ++ */ ++ if (ar231x_allocate_descriptors(dev)) { ++ printk("%s: %s: ar231x_allocate_descriptors failed\n", ++ dev->name, __FUNCTION__); ++ ecode = -EAGAIN; ++ goto init_error; ++ } ++ ++ /* ++ * Get the memory for the skb rings. ++ */ ++ if (sp->rx_skb == NULL) { ++ sp->rx_skb = ++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, ++ GFP_KERNEL); ++ if (!(sp->rx_skb)) { ++ printk("%s: %s: rx_skb kmalloc failed\n", ++ dev->name, __FUNCTION__); ++ ecode = -EAGAIN; ++ goto init_error; ++ } ++ } ++ memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); ++ ++ if (sp->tx_skb == NULL) { ++ sp->tx_skb = ++ kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, ++ GFP_KERNEL); ++ if (!(sp->tx_skb)) { ++ printk("%s: %s: tx_skb kmalloc failed\n", ++ dev->name, __FUNCTION__); ++ ecode = -EAGAIN; ++ goto init_error; ++ } ++ } ++ memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES); ++ ++ /* ++ * Set tx_csm before we start receiving interrupts, otherwise ++ * the interrupt handler might think it is supposed to process ++ * tx ints before we are up and running, which may cause a null ++ * pointer access in the int handler. ++ */ ++ sp->rx_skbprd = 0; ++ sp->cur_rx = 0; ++ sp->tx_prd = 0; ++ sp->tx_csm = 0; ++ ++ /* ++ * Zero the stats before starting the interface ++ */ ++ memset(&dev->stats, 0, sizeof(dev->stats)); ++ ++ /* ++ * We load the ring here as there seem to be no way to tell the ++ * firmware to wipe the ring without re-initializing it. ++ */ ++ ar231x_load_rx_ring(dev, RX_RING_SIZE); ++ ++ /* ++ * Init hardware ++ */ ++ ar231x_reset_reg(dev); ++ ++ /* ++ * Get the IRQ ++ */ ++ ecode = ++ request_irq(dev->irq, &ar231x_interrupt, ++ IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM, ++ dev->name, dev); ++ if (ecode) { ++ printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n", ++ dev->name, __FUNCTION__, dev->irq); ++ goto init_error; ++ } ++ ++ ++ tasklet_enable(&sp->rx_tasklet); ++ ++ return 0; ++ ++ init_error: ++ ar231x_init_cleanup(dev); ++ return ecode; ++} ++ ++/* ++ * Load the rx ring. ++ * ++ * Loading rings is safe without holding the spin lock since this is ++ * done only before the device is enabled, thus no interrupts are ++ * generated and by the interrupt handler/tasklet handler. ++ */ ++static void ar231x_load_rx_ring(struct net_device *dev, int nr_bufs) ++{ ++ ++ struct ar231x_private *sp = netdev_priv(dev); ++ short i, idx; ++ ++ idx = sp->rx_skbprd; ++ ++ for (i = 0; i < nr_bufs; i++) { ++ struct sk_buff *skb; ++ ar231x_descr_t *rd; ++ ++ if (sp->rx_skb[idx]) ++ break; ++ ++ // partha: create additional room for the second GRE fragment ++ skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC); ++ if (!skb) { ++ printk("\n\n\n\n %s: No memory in system\n\n\n\n", ++ __FUNCTION__); ++ break; ++ } ++ // partha: create additional room in the front for tx pkt capture ++ skb_reserve(skb, 32); ++ ++ /* ++ * Make sure IP header starts on a fresh cache line. ++ */ ++ skb->dev = dev; ++ skb_reserve(skb, RX_OFFSET); ++ sp->rx_skb[idx] = skb; ++ ++ rd = (ar231x_descr_t *) & sp->rx_ring[idx]; ++ ++ /* initialize dma descriptor */ ++ rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | ++ DMA_RX1_CHAINED); ++ rd->addr = virt_to_phys(skb->data); ++ rd->descr = ++ virt_to_phys(&sp-> ++ rx_ring[(idx + 1) & (AR2313_DESCR_ENTRIES - 1)]); ++ rd->status = DMA_RX_OWN; ++ ++ idx = DSC_NEXT(idx); ++ } ++ ++ if (i) ++ sp->rx_skbprd = idx; ++ ++ return; ++} ++ ++#define AR2313_MAX_PKTS_PER_CALL 64 ++ ++static int ar231x_rx_int(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ struct sk_buff *skb, *skb_new; ++ ar231x_descr_t *rxdesc; ++ unsigned int status; ++ u32 idx; ++ int pkts = 0; ++ int rval; ++ ++ idx = sp->cur_rx; ++ ++ /* process at most the entire ring and then wait for another interrupt ++ */ ++ while (1) { ++ ++ rxdesc = &sp->rx_ring[idx]; ++ status = rxdesc->status; ++ if (status & DMA_RX_OWN) { ++ /* SiByte owns descriptor or descr not yet filled in */ ++ rval = 0; ++ break; ++ } ++ ++ if (++pkts > AR2313_MAX_PKTS_PER_CALL) { ++ rval = 1; ++ break; ++ } ++ ++ if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) && ++ (!(status & DMA_RX_LONG))) { ++ dev->stats.rx_errors++; ++ dev->stats.rx_dropped++; ++ ++ /* add statistics counters */ ++ if (status & DMA_RX_ERR_CRC) ++ dev->stats.rx_crc_errors++; ++ if (status & DMA_RX_ERR_COL) ++ dev->stats.rx_over_errors++; ++ if (status & DMA_RX_ERR_LENGTH) ++ dev->stats.rx_length_errors++; ++ if (status & DMA_RX_ERR_RUNT) ++ dev->stats.rx_over_errors++; ++ if (status & DMA_RX_ERR_DESC) ++ dev->stats.rx_over_errors++; ++ ++ } else { ++ /* alloc new buffer. */ ++ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128); ++ if (skb_new != NULL) { ++ ++ skb = sp->rx_skb[idx]; ++ /* set skb */ ++ skb_put(skb, ++ ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); ++ ++ dev->stats.rx_bytes += skb->len; ++ skb->protocol = eth_type_trans(skb, dev); ++ /* pass the packet to upper layers */ ++ netif_rx(skb); ++ ++ skb_new->dev = dev; ++ /* 16 bit align */ ++ skb_reserve(skb_new, RX_OFFSET + 32); ++ /* reset descriptor's curr_addr */ ++ rxdesc->addr = virt_to_phys(skb_new->data); ++ ++ dev->stats.rx_packets++; ++ sp->rx_skb[idx] = skb_new; ++ } else { ++ dev->stats.rx_dropped++; ++ } ++ } ++ ++ rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) | ++ DMA_RX1_CHAINED); ++ rxdesc->status = DMA_RX_OWN; ++ ++ idx = DSC_NEXT(idx); ++ } ++ ++ sp->cur_rx = idx; ++ ++ return rval; ++} ++ ++ ++static void ar231x_tx_int(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ u32 idx; ++ struct sk_buff *skb; ++ ar231x_descr_t *txdesc; ++ unsigned int status = 0; ++ ++ idx = sp->tx_csm; ++ ++ while (idx != sp->tx_prd) { ++ txdesc = &sp->tx_ring[idx]; ++ ++ if ((status = txdesc->status) & DMA_TX_OWN) { ++ /* ar231x dma still owns descr */ ++ break; ++ } ++ /* done with this descriptor */ ++ dma_unmap_single(NULL, txdesc->addr, ++ txdesc->devcs & DMA_TX1_BSIZE_MASK, ++ DMA_TO_DEVICE); ++ txdesc->status = 0; ++ ++ if (status & DMA_TX_ERROR) { ++ dev->stats.tx_errors++; ++ dev->stats.tx_dropped++; ++ if (status & DMA_TX_ERR_UNDER) ++ dev->stats.tx_fifo_errors++; ++ if (status & DMA_TX_ERR_HB) ++ dev->stats.tx_heartbeat_errors++; ++ if (status & (DMA_TX_ERR_LOSS | DMA_TX_ERR_LINK)) ++ dev->stats.tx_carrier_errors++; ++ if (status & (DMA_TX_ERR_LATE | ++ DMA_TX_ERR_COL | ++ DMA_TX_ERR_JABBER | DMA_TX_ERR_DEFER)) ++ dev->stats.tx_aborted_errors++; ++ } else { ++ /* transmit OK */ ++ dev->stats.tx_packets++; ++ } ++ ++ skb = sp->tx_skb[idx]; ++ sp->tx_skb[idx] = NULL; ++ idx = DSC_NEXT(idx); ++ dev->stats.tx_bytes += skb->len; ++ dev_kfree_skb_irq(skb); ++ } ++ ++ sp->tx_csm = idx; ++ ++ return; ++} ++ ++ ++static void rx_tasklet_func(unsigned long data) ++{ ++ struct net_device *dev = (struct net_device *) data; ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ if (sp->unloading) { ++ return; ++ } ++ ++ if (ar231x_rx_int(dev)) { ++ tasklet_hi_schedule(&sp->rx_tasklet); ++ } else { ++ unsigned long flags; ++ spin_lock_irqsave(&sp->lock, flags); ++ sp->dma_regs->intr_ena |= DMA_STATUS_RI; ++ spin_unlock_irqrestore(&sp->lock, flags); ++ } ++} ++ ++static void rx_schedule(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ++ sp->dma_regs->intr_ena &= ~DMA_STATUS_RI; ++ ++ tasklet_hi_schedule(&sp->rx_tasklet); ++} ++ ++static irqreturn_t ar231x_interrupt(int irq, void *dev_id) ++{ ++ struct net_device *dev = (struct net_device *) dev_id; ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int status, enabled; ++ ++ /* clear interrupt */ ++ /* ++ * Don't clear RI bit if currently disabled. ++ */ ++ status = sp->dma_regs->status; ++ enabled = sp->dma_regs->intr_ena; ++ sp->dma_regs->status = status & enabled; ++ ++ if (status & DMA_STATUS_NIS) { ++ /* normal status */ ++ /* ++ * Don't schedule rx processing if interrupt ++ * is already disabled. ++ */ ++ if (status & enabled & DMA_STATUS_RI) { ++ /* receive interrupt */ ++ rx_schedule(dev); ++ } ++ if (status & DMA_STATUS_TI) { ++ /* transmit interrupt */ ++ ar231x_tx_int(dev); ++ } ++ } ++ ++ /* abnormal status */ ++ if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) { ++ ar231x_restart(dev); ++ } ++ return IRQ_HANDLED; ++} ++ ++ ++static int ar231x_open(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int ethsal, ethsah; ++ ++ /* reset the hardware, in case the MAC address changed */ ++ ethsah = ((((u_int) (dev->dev_addr[5]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[4]) << 0) & (u_int) 0x000000FF)); ++ ++ ethsal = ((((u_int) (dev->dev_addr[3]) << 24) & (u_int) 0xFF000000) | ++ (((u_int) (dev->dev_addr[2]) << 16) & (u_int) 0x00FF0000) | ++ (((u_int) (dev->dev_addr[1]) << 8) & (u_int) 0x0000FF00) | ++ (((u_int) (dev->dev_addr[0]) << 0) & (u_int) 0x000000FF)); ++ ++ sp->eth_regs->mac_addr[0] = ethsah; ++ sp->eth_regs->mac_addr[1] = ethsal; ++ ++ mdelay(10); ++ ++ dev->mtu = 1500; ++ netif_start_queue(dev); ++ ++ sp->eth_regs->mac_control |= MAC_CONTROL_RE; ++ ++ return 0; ++} ++ ++static void ar231x_halt(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ int j; ++ ++ tasklet_disable(&sp->rx_tasklet); ++ ++ /* kill the MAC */ ++ sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */ ++ MAC_CONTROL_TE); /* disable Transmits */ ++ /* stop dma */ ++ sp->dma_regs->control = 0; ++ sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR; ++ ++ /* place phy and MAC in reset */ ++ *sp->int_regs |= (sp->cfg->reset_mac | sp->cfg->reset_phy); ++ ++ /* free buffers on tx ring */ ++ for (j = 0; j < AR2313_DESCR_ENTRIES; j++) { ++ struct sk_buff *skb; ++ ar231x_descr_t *txdesc; ++ ++ txdesc = &sp->tx_ring[j]; ++ txdesc->descr = 0; ++ ++ skb = sp->tx_skb[j]; ++ if (skb) { ++ dev_kfree_skb(skb); ++ sp->tx_skb[j] = NULL; ++ } ++ } ++} ++ ++/* ++ * close should do nothing. Here's why. It's called when ++ * 'ifconfig bond0 down' is run. If it calls free_irq then ++ * the irq is gone forever ! When bond0 is made 'up' again, ++ * the ar231x_open () does not call request_irq (). Worse, ++ * the call to ar231x_halt() generates a WDOG reset due to ++ * the write to 'sp->int_regs' and the box reboots. ++ * Commenting this out is good since it allows the ++ * system to resume when bond0 is made up again. ++ */ ++static int ar231x_close(struct net_device *dev) ++{ ++#if 0 ++ /* ++ * Disable interrupts ++ */ ++ disable_irq(dev->irq); ++ ++ /* ++ * Without (or before) releasing irq and stopping hardware, this ++ * is an absolute non-sense, by the way. It will be reset instantly ++ * by the first irq. ++ */ ++ netif_stop_queue(dev); ++ ++ /* stop the MAC and DMA engines */ ++ ar231x_halt(dev); ++ ++ /* release the interrupt */ ++ free_irq(dev->irq, dev); ++ ++#endif ++ return 0; ++} ++ ++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ ar231x_descr_t *td; ++ u32 idx; ++ ++ idx = sp->tx_prd; ++ td = &sp->tx_ring[idx]; ++ ++ if (td->status & DMA_TX_OWN) { ++ /* free skbuf and lie to the caller that we sent it out */ ++ dev->stats.tx_dropped++; ++ dev_kfree_skb(skb); ++ ++ /* restart transmitter in case locked */ ++ sp->dma_regs->xmt_poll = 0; ++ return 0; ++ } ++ ++ /* Setup the transmit descriptor. */ ++ td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) | ++ (DMA_TX1_LS | DMA_TX1_IC | DMA_TX1_CHAINED)); ++ td->addr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ td->status = DMA_TX_OWN; ++ ++ /* kick transmitter last */ ++ sp->dma_regs->xmt_poll = 0; ++ ++ sp->tx_skb[idx] = skb; ++ idx = DSC_NEXT(idx); ++ sp->tx_prd = idx; ++ ++ return 0; ++} ++ ++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) ++{ ++ struct mii_ioctl_data *data = (struct mii_ioctl_data *) &ifr->ifr_data; ++ struct ar231x_private *sp = netdev_priv(dev); ++ int ret; ++ ++ switch (cmd) { ++ ++ case SIOCETHTOOL: ++ spin_lock_irq(&sp->lock); ++ ret = phy_ethtool_ioctl(sp->phy_dev, (void *) ifr->ifr_data); ++ spin_unlock_irq(&sp->lock); ++ return ret; ++ ++ case SIOCSIFHWADDR: ++ if (copy_from_user ++ (dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr))) ++ return -EFAULT; ++ return 0; ++ ++ case SIOCGIFHWADDR: ++ if (copy_to_user ++ (ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr))) ++ return -EFAULT; ++ return 0; ++ ++ case SIOCGMIIPHY: ++ case SIOCGMIIREG: ++ case SIOCSMIIREG: ++ return phy_mii_ioctl(sp->phy_dev, data, cmd); ++ ++ default: ++ break; ++ } ++ ++ return -EOPNOTSUPP; ++} ++ ++static void ar231x_adjust_link(struct net_device *dev) ++{ ++ struct ar231x_private *sp = netdev_priv(dev); ++ unsigned int mc; ++ ++ if (!sp->phy_dev->link) ++ return; ++ ++ if (sp->phy_dev->duplex != sp->oldduplex) { ++ mc = readl(&sp->eth_regs->mac_control); ++ mc &= ~(MAC_CONTROL_F | MAC_CONTROL_DRO); ++ if (sp->phy_dev->duplex) ++ mc |= MAC_CONTROL_F; ++ else ++ mc |= MAC_CONTROL_DRO; ++ writel(mc, &sp->eth_regs->mac_control); ++ sp->oldduplex = sp->phy_dev->duplex; ++ } ++} ++ ++#define MII_ADDR(phy, reg) \ ++ ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) ++ ++static int ++ar231x_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) ++{ ++ struct net_device *const dev = bus->priv; ++ struct ar231x_private *sp = netdev_priv(dev); ++ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; ++ ++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum); ++ while (ethernet->mii_addr & MII_ADDR_BUSY); ++ return (ethernet->mii_data >> MII_DATA_SHIFT); ++} ++ ++static int ++ar231x_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, ++ u16 value) ++{ ++ struct net_device *const dev = bus->priv; ++ struct ar231x_private *sp = netdev_priv(dev); ++ volatile ETHERNET_STRUCT *ethernet = sp->phy_regs; ++ ++ while (ethernet->mii_addr & MII_ADDR_BUSY); ++ ethernet->mii_data = value << MII_DATA_SHIFT; ++ ethernet->mii_addr = MII_ADDR(phy_addr, regnum) | MII_ADDR_WRITE; ++ ++ return 0; ++} ++ ++static int ar231x_mdiobus_reset(struct mii_bus *bus) ++{ ++ struct net_device *const dev = bus->priv; ++ ++ ar231x_reset_reg(dev); ++ ++ return 0; ++} ++ ++static int ar231x_mdiobus_probe (struct net_device *dev) ++{ ++ struct ar231x_private *const sp = netdev_priv(dev); ++ struct phy_device *phydev = NULL; ++ int phy_addr; ++ ++ /* find the first (lowest address) PHY on the current MAC's MII bus */ ++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) ++ if (sp->mii_bus->phy_map[phy_addr]) { ++ phydev = sp->mii_bus->phy_map[phy_addr]; ++ sp->phy = phy_addr; ++ break; /* break out with first one found */ ++ } ++ ++ if (!phydev) { ++ printk (KERN_ERR "ar231x: %s: no PHY found\n", dev->name); ++ return -1; ++ } ++ ++ /* now we are supposed to have a proper phydev, to attach to... */ ++ BUG_ON(!phydev); ++ BUG_ON(phydev->attached_dev); ++ ++ phydev = phy_connect(dev, phydev->dev.bus_id, &ar231x_adjust_link, 0, ++ PHY_INTERFACE_MODE_MII); ++ ++ if (IS_ERR(phydev)) { ++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name); ++ return PTR_ERR(phydev); ++ } ++ ++ /* mask with MAC supported features */ ++ phydev->supported &= (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full ++ | SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full ++ | SUPPORTED_Autoneg ++ /* | SUPPORTED_Pause | SUPPORTED_Asym_Pause */ ++ | SUPPORTED_MII ++ | SUPPORTED_TP); ++ ++ phydev->advertising = phydev->supported; ++ ++ sp->oldduplex = -1; ++ sp->phy_dev = phydev; ++ ++ printk(KERN_INFO "%s: attached PHY driver [%s] " ++ "(mii_bus:phy_addr=%s)\n", ++ dev->name, phydev->drv->name, phydev->dev.bus_id); ++ ++ return 0; ++} ++ +--- /dev/null ++++ b/drivers/net/ar231x.h +@@ -0,0 +1,302 @@ ++/* ++ * ar231x.h: Linux driver for the Atheros AR231x Ethernet device. ++ * ++ * Copyright (C) 2004 by Sameer Dekate ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * Thanks to Atheros for providing hardware and documentation ++ * enabling me to write this driver. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++ ++#ifndef _AR2313_H_ ++#define _AR2313_H_ ++ ++#include ++#include ++#include ++#include ++ ++/* ++ * probe link timer - 5 secs ++ */ ++#define LINK_TIMER (5*HZ) ++ ++#define IS_DMA_TX_INT(X) (((X) & (DMA_STATUS_TI)) != 0) ++#define IS_DMA_RX_INT(X) (((X) & (DMA_STATUS_RI)) != 0) ++#define IS_DRIVER_OWNED(X) (((X) & (DMA_TX_OWN)) == 0) ++ ++#define AR2313_TX_TIMEOUT (HZ/4) ++ ++/* ++ * Rings ++ */ ++#define DSC_RING_ENTRIES_SIZE (AR2313_DESCR_ENTRIES * sizeof(struct desc)) ++#define DSC_NEXT(idx) ((idx + 1) & (AR2313_DESCR_ENTRIES - 1)) ++ ++#define AR2313_MBGET 2 ++#define AR2313_MBSET 3 ++#define AR2313_PCI_RECONFIG 4 ++#define AR2313_PCI_DUMP 5 ++#define AR2313_TEST_PANIC 6 ++#define AR2313_TEST_NULLPTR 7 ++#define AR2313_READ_DATA 8 ++#define AR2313_WRITE_DATA 9 ++#define AR2313_GET_VERSION 10 ++#define AR2313_TEST_HANG 11 ++#define AR2313_SYNC 12 ++ ++#define DMA_RX_ERR_CRC BIT(1) ++#define DMA_RX_ERR_DRIB BIT(2) ++#define DMA_RX_ERR_MII BIT(3) ++#define DMA_RX_EV2 BIT(5) ++#define DMA_RX_ERR_COL BIT(6) ++#define DMA_RX_LONG BIT(7) ++#define DMA_RX_LS BIT(8) /* last descriptor */ ++#define DMA_RX_FS BIT(9) /* first descriptor */ ++#define DMA_RX_MF BIT(10) /* multicast frame */ ++#define DMA_RX_ERR_RUNT BIT(11) /* runt frame */ ++#define DMA_RX_ERR_LENGTH BIT(12) /* length error */ ++#define DMA_RX_ERR_DESC BIT(14) /* descriptor error */ ++#define DMA_RX_ERROR BIT(15) /* error summary */ ++#define DMA_RX_LEN_MASK 0x3fff0000 ++#define DMA_RX_LEN_SHIFT 16 ++#define DMA_RX_FILT BIT(30) ++#define DMA_RX_OWN BIT(31) /* desc owned by DMA controller */ ++ ++#define DMA_RX1_BSIZE_MASK 0x000007ff ++#define DMA_RX1_BSIZE_SHIFT 0 ++#define DMA_RX1_CHAINED BIT(24) ++#define DMA_RX1_RER BIT(25) ++ ++#define DMA_TX_ERR_UNDER BIT(1) /* underflow error */ ++#define DMA_TX_ERR_DEFER BIT(2) /* excessive deferral */ ++#define DMA_TX_COL_MASK 0x78 ++#define DMA_TX_COL_SHIFT 3 ++#define DMA_TX_ERR_HB BIT(7) /* hearbeat failure */ ++#define DMA_TX_ERR_COL BIT(8) /* excessive collisions */ ++#define DMA_TX_ERR_LATE BIT(9) /* late collision */ ++#define DMA_TX_ERR_LINK BIT(10) /* no carrier */ ++#define DMA_TX_ERR_LOSS BIT(11) /* loss of carrier */ ++#define DMA_TX_ERR_JABBER BIT(14) /* transmit jabber timeout */ ++#define DMA_TX_ERROR BIT(15) /* frame aborted */ ++#define DMA_TX_OWN BIT(31) /* descr owned by DMA controller */ ++ ++#define DMA_TX1_BSIZE_MASK 0x000007ff ++#define DMA_TX1_BSIZE_SHIFT 0 ++#define DMA_TX1_CHAINED BIT(24) /* chained descriptors */ ++#define DMA_TX1_TER BIT(25) /* transmit end of ring */ ++#define DMA_TX1_FS BIT(29) /* first segment */ ++#define DMA_TX1_LS BIT(30) /* last segment */ ++#define DMA_TX1_IC BIT(31) /* interrupt on completion */ ++ ++#define RCVPKT_LENGTH(X) (X >> 16) /* Received pkt Length */ ++ ++#define MAC_CONTROL_RE BIT(2) /* receive enable */ ++#define MAC_CONTROL_TE BIT(3) /* transmit enable */ ++#define MAC_CONTROL_DC BIT(5) /* Deferral check */ ++#define MAC_CONTROL_ASTP BIT(8) /* Auto pad strip */ ++#define MAC_CONTROL_DRTY BIT(10) /* Disable retry */ ++#define MAC_CONTROL_DBF BIT(11) /* Disable bcast frames */ ++#define MAC_CONTROL_LCC BIT(12) /* late collision ctrl */ ++#define MAC_CONTROL_HP BIT(13) /* Hash Perfect filtering */ ++#define MAC_CONTROL_HASH BIT(14) /* Unicast hash filtering */ ++#define MAC_CONTROL_HO BIT(15) /* Hash only filtering */ ++#define MAC_CONTROL_PB BIT(16) /* Pass Bad frames */ ++#define MAC_CONTROL_IF BIT(17) /* Inverse filtering */ ++#define MAC_CONTROL_PR BIT(18) /* promiscuous mode (valid frames only) */ ++#define MAC_CONTROL_PM BIT(19) /* pass multicast */ ++#define MAC_CONTROL_F BIT(20) /* full-duplex */ ++#define MAC_CONTROL_DRO BIT(23) /* Disable Receive Own */ ++#define MAC_CONTROL_HBD BIT(28) /* heart-beat disabled (MUST BE SET) */ ++#define MAC_CONTROL_BLE BIT(30) /* big endian mode */ ++#define MAC_CONTROL_RA BIT(31) /* receive all (valid and invalid frames) */ ++ ++#define MII_ADDR_BUSY BIT(0) ++#define MII_ADDR_WRITE BIT(1) ++#define MII_ADDR_REG_SHIFT 6 ++#define MII_ADDR_PHY_SHIFT 11 ++#define MII_DATA_SHIFT 0 ++ ++#define FLOW_CONTROL_FCE BIT(1) ++ ++#define DMA_BUS_MODE_SWR BIT(0) /* software reset */ ++#define DMA_BUS_MODE_BLE BIT(7) /* big endian mode */ ++#define DMA_BUS_MODE_PBL_SHIFT 8 /* programmable burst length 32 */ ++#define DMA_BUS_MODE_DBO BIT(20) /* big-endian descriptors */ ++ ++#define DMA_STATUS_TI BIT(0) /* transmit interrupt */ ++#define DMA_STATUS_TPS BIT(1) /* transmit process stopped */ ++#define DMA_STATUS_TU BIT(2) /* transmit buffer unavailable */ ++#define DMA_STATUS_TJT BIT(3) /* transmit buffer timeout */ ++#define DMA_STATUS_UNF BIT(5) /* transmit underflow */ ++#define DMA_STATUS_RI BIT(6) /* receive interrupt */ ++#define DMA_STATUS_RU BIT(7) /* receive buffer unavailable */ ++#define DMA_STATUS_RPS BIT(8) /* receive process stopped */ ++#define DMA_STATUS_ETI BIT(10) /* early transmit interrupt */ ++#define DMA_STATUS_FBE BIT(13) /* fatal bus interrupt */ ++#define DMA_STATUS_ERI BIT(14) /* early receive interrupt */ ++#define DMA_STATUS_AIS BIT(15) /* abnormal interrupt summary */ ++#define DMA_STATUS_NIS BIT(16) /* normal interrupt summary */ ++#define DMA_STATUS_RS_SHIFT 17 /* receive process state */ ++#define DMA_STATUS_TS_SHIFT 20 /* transmit process state */ ++#define DMA_STATUS_EB_SHIFT 23 /* error bits */ ++ ++#define DMA_CONTROL_SR BIT(1) /* start receive */ ++#define DMA_CONTROL_ST BIT(13) /* start transmit */ ++#define DMA_CONTROL_SF BIT(21) /* store and forward */ ++ ++ ++typedef struct { ++ volatile unsigned int status; // OWN, Device control and status. ++ volatile unsigned int devcs; // pkt Control bits + Length ++ volatile unsigned int addr; // Current Address. ++ volatile unsigned int descr; // Next descriptor in chain. ++} ar231x_descr_t; ++ ++ ++ ++// ++// New Combo structure for Both Eth0 AND eth1 ++// ++typedef struct { ++ volatile unsigned int mac_control; /* 0x00 */ ++ volatile unsigned int mac_addr[2]; /* 0x04 - 0x08 */ ++ volatile unsigned int mcast_table[2]; /* 0x0c - 0x10 */ ++ volatile unsigned int mii_addr; /* 0x14 */ ++ volatile unsigned int mii_data; /* 0x18 */ ++ volatile unsigned int flow_control; /* 0x1c */ ++ volatile unsigned int vlan_tag; /* 0x20 */ ++ volatile unsigned int pad[7]; /* 0x24 - 0x3c */ ++ volatile unsigned int ucast_table[8]; /* 0x40-0x5c */ ++ ++} ETHERNET_STRUCT; ++ ++/******************************************************************** ++ * Interrupt controller ++ ********************************************************************/ ++ ++typedef struct { ++ volatile unsigned int wdog_control; /* 0x08 */ ++ volatile unsigned int wdog_timer; /* 0x0c */ ++ volatile unsigned int misc_status; /* 0x10 */ ++ volatile unsigned int misc_mask; /* 0x14 */ ++ volatile unsigned int global_status; /* 0x18 */ ++ volatile unsigned int reserved; /* 0x1c */ ++ volatile unsigned int reset_control; /* 0x20 */ ++} INTERRUPT; ++ ++/******************************************************************** ++ * DMA controller ++ ********************************************************************/ ++typedef struct { ++ volatile unsigned int bus_mode; /* 0x00 (CSR0) */ ++ volatile unsigned int xmt_poll; /* 0x04 (CSR1) */ ++ volatile unsigned int rcv_poll; /* 0x08 (CSR2) */ ++ volatile unsigned int rcv_base; /* 0x0c (CSR3) */ ++ volatile unsigned int xmt_base; /* 0x10 (CSR4) */ ++ volatile unsigned int status; /* 0x14 (CSR5) */ ++ volatile unsigned int control; /* 0x18 (CSR6) */ ++ volatile unsigned int intr_ena; /* 0x1c (CSR7) */ ++ volatile unsigned int rcv_missed; /* 0x20 (CSR8) */ ++ volatile unsigned int reserved[11]; /* 0x24-0x4c (CSR9-19) */ ++ volatile unsigned int cur_tx_buf_addr; /* 0x50 (CSR20) */ ++ volatile unsigned int cur_rx_buf_addr; /* 0x50 (CSR21) */ ++} DMA; ++ ++/* ++ * Struct private for the Sibyte. ++ * ++ * Elements are grouped so variables used by the tx handling goes ++ * together, and will go into the same cache lines etc. in order to ++ * avoid cache line contention between the rx and tx handling on SMP. ++ * ++ * Frequently accessed variables are put at the beginning of the ++ * struct to help the compiler generate better/shorter code. ++ */ ++struct ar231x_private { ++ struct net_device *dev; ++ int version; ++ u32 mb[2]; ++ ++ volatile ETHERNET_STRUCT *phy_regs; ++ volatile ETHERNET_STRUCT *eth_regs; ++ volatile DMA *dma_regs; ++ volatile u32 *int_regs; ++ struct ar231x_eth *cfg; ++ ++ spinlock_t lock; /* Serialise access to device */ ++ ++ /* ++ * RX and TX descriptors, must be adjacent ++ */ ++ ar231x_descr_t *rx_ring; ++ ar231x_descr_t *tx_ring; ++ ++ ++ struct sk_buff **rx_skb; ++ struct sk_buff **tx_skb; ++ ++ /* ++ * RX elements ++ */ ++ u32 rx_skbprd; ++ u32 cur_rx; ++ ++ /* ++ * TX elements ++ */ ++ u32 tx_prd; ++ u32 tx_csm; ++ ++ /* ++ * Misc elements ++ */ ++ char name[48]; ++ struct { ++ u32 address; ++ u32 length; ++ char *mapping; ++ } desc; ++ ++ ++ struct timer_list link_timer; ++ unsigned short phy; /* merlot phy = 1, samsung phy = 0x1f */ ++ unsigned short mac; ++ unsigned short link; /* 0 - link down, 1 - link up */ ++ u16 phyData; ++ ++ struct tasklet_struct rx_tasklet; ++ int unloading; ++ ++ struct phy_device *phy_dev; ++ struct mii_bus *mii_bus; ++ int oldduplex; ++}; ++ ++ ++/* ++ * Prototypes ++ */ ++static int ar231x_init(struct net_device *dev); ++#ifdef TX_TIMEOUT ++static void ar231x_tx_timeout(struct net_device *dev); ++#endif ++static int ar231x_restart(struct net_device *dev); ++static void ar231x_load_rx_ring(struct net_device *dev, int bufs); ++static irqreturn_t ar231x_interrupt(int irq, void *dev_id); ++static int ar231x_open(struct net_device *dev); ++static int ar231x_start_xmit(struct sk_buff *skb, struct net_device *dev); ++static int ar231x_close(struct net_device *dev); ++static int ar231x_ioctl(struct net_device *dev, struct ifreq *ifr, ++ int cmd); ++static void ar231x_init_cleanup(struct net_device *dev); ++static int ar231x_setup_timer(struct net_device *dev); ++static void ar231x_link_timer_fn(unsigned long data); ++static void ar231x_check_link(struct net_device *dev); ++#endif /* _AR2313_H_ */ diff --git a/target/linux/atheros/patches-2.6.28/110-spiflash.patch b/target/linux/atheros/patches-2.6.28/110-spiflash.patch deleted file mode 100644 index 4b9b9d6891..0000000000 --- a/target/linux/atheros/patches-2.6.28/110-spiflash.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/mtd/devices/Kconfig -+++ b/drivers/mtd/devices/Kconfig -@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ - help - This option enables FAST_READ access supported by ST M25Pxx. - -+config MTD_SPIFLASH -+ tristate "Atheros AR2315/6/7 SPI Flash support" -+ depends on ATHEROS_AR5315 -+ - config MTD_SLRAM - tristate "Uncached system RAM" - help ---- a/drivers/mtd/devices/Makefile -+++ b/drivers/mtd/devices/Makefile -@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o - obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o - obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o - obj-$(CONFIG_MTD_M25P80) += m25p80.o -+obj-$(CONFIG_MTD_SPIFLASH) += spiflash.o diff --git a/target/linux/atheros/patches-2.6.28/120-spiflash.patch b/target/linux/atheros/patches-2.6.28/120-spiflash.patch new file mode 100644 index 0000000000..e661365066 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/120-spiflash.patch @@ -0,0 +1,661 @@ +--- a/drivers/mtd/devices/Kconfig ++++ b/drivers/mtd/devices/Kconfig +@@ -104,6 +104,10 @@ config M25PXX_USE_FAST_READ + help + This option enables FAST_READ access supported by ST M25Pxx. + ++config MTD_AR2315 ++ tristate "Atheros AR2315+ SPI Flash support" ++ depends on ATHEROS_AR2315 ++ + config MTD_SLRAM + tristate "Uncached system RAM" + help +--- a/drivers/mtd/devices/Makefile ++++ b/drivers/mtd/devices/Makefile +@@ -16,3 +16,4 @@ obj-$(CONFIG_MTD_LART) += lart.o + obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o + obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o + obj-$(CONFIG_MTD_M25P80) += m25p80.o ++obj-$(CONFIG_MTD_AR2315) += ar2315.o +--- /dev/null ++++ b/drivers/mtd/devices/ar2315.c +@@ -0,0 +1,519 @@ ++ ++/* ++ * MTD driver for the SPI Flash Memory support on Atheros AR2315 ++ * ++ * Copyright (c) 2005-2006 Atheros Communications Inc. ++ * Copyright (C) 2006-2007 FON Technology, SL. ++ * Copyright (C) 2006-2007 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++ ++#define SPIFLASH "spiflash: " ++#define busy_wait(_priv, _condition, _wait) do { \ ++ while (_condition) { \ ++ spin_unlock_bh(&_priv->lock); \ ++ if (_wait > 1) \ ++ msleep(_wait); \ ++ else if ((_wait == 1) && need_resched()) \ ++ schedule(); \ ++ else \ ++ udelay(1); \ ++ spin_lock_bh(&_priv->lock); \ ++ } \ ++} while (0) ++ ++enum { ++ FLASH_NONE, ++ FLASH_1MB, ++ FLASH_2MB, ++ FLASH_4MB, ++ FLASH_8MB, ++ FLASH_16MB, ++}; ++ ++/* Flash configuration table */ ++struct flashconfig { ++ u32 byte_cnt; ++ u32 sector_cnt; ++ u32 sector_size; ++}; ++ ++const struct flashconfig flashconfig_tbl[] = { ++ [FLASH_NONE] = { 0, 0, 0}, ++ [FLASH_1MB] = { STM_1MB_BYTE_COUNT, STM_1MB_SECTOR_COUNT, STM_1MB_SECTOR_SIZE}, ++ [FLASH_2MB] = { STM_2MB_BYTE_COUNT, STM_2MB_SECTOR_COUNT, STM_2MB_SECTOR_SIZE}, ++ [FLASH_4MB] = { STM_4MB_BYTE_COUNT, STM_4MB_SECTOR_COUNT, STM_4MB_SECTOR_SIZE}, ++ [FLASH_8MB] = { STM_8MB_BYTE_COUNT, STM_8MB_SECTOR_COUNT, STM_8MB_SECTOR_SIZE}, ++ [FLASH_16MB] = { STM_16MB_BYTE_COUNT, STM_16MB_SECTOR_COUNT, STM_16MB_SECTOR_SIZE} ++}; ++ ++/* Mapping of generic opcodes to STM serial flash opcodes */ ++enum { ++ SPI_WRITE_ENABLE, ++ SPI_WRITE_DISABLE, ++ SPI_RD_STATUS, ++ SPI_WR_STATUS, ++ SPI_RD_DATA, ++ SPI_FAST_RD_DATA, ++ SPI_PAGE_PROGRAM, ++ SPI_SECTOR_ERASE, ++ SPI_BULK_ERASE, ++ SPI_DEEP_PWRDOWN, ++ SPI_RD_SIG, ++}; ++ ++struct opcodes { ++ __u16 code; ++ __s8 tx_cnt; ++ __s8 rx_cnt; ++}; ++const struct opcodes stm_opcodes[] = { ++ [SPI_WRITE_ENABLE] = {STM_OP_WR_ENABLE, 1, 0}, ++ [SPI_WRITE_DISABLE] = {STM_OP_WR_DISABLE, 1, 0}, ++ [SPI_RD_STATUS] = {STM_OP_RD_STATUS, 1, 1}, ++ [SPI_WR_STATUS] = {STM_OP_WR_STATUS, 1, 0}, ++ [SPI_RD_DATA] = {STM_OP_RD_DATA, 4, 4}, ++ [SPI_FAST_RD_DATA] = {STM_OP_FAST_RD_DATA, 5, 0}, ++ [SPI_PAGE_PROGRAM] = {STM_OP_PAGE_PGRM, 8, 0}, ++ [SPI_SECTOR_ERASE] = {STM_OP_SECTOR_ERASE, 4, 0}, ++ [SPI_BULK_ERASE] = {STM_OP_BULK_ERASE, 1, 0}, ++ [SPI_DEEP_PWRDOWN] = {STM_OP_DEEP_PWRDOWN, 1, 0}, ++ [SPI_RD_SIG] = {STM_OP_RD_SIG, 4, 1}, ++}; ++ ++/* Driver private data structure */ ++struct spiflash_priv { ++ struct mtd_info mtd; ++ void *readaddr; /* memory mapped data for read */ ++ void *mmraddr; /* memory mapped register space */ ++ wait_queue_head_t wq; ++ spinlock_t lock; ++ int state; ++}; ++ ++#define to_spiflash(_mtd) container_of(_mtd, struct spiflash_priv, mtd) ++ ++enum { ++ FL_READY, ++ FL_READING, ++ FL_ERASING, ++ FL_WRITING ++}; ++ ++/***************************************************************************************************/ ++ ++static u32 ++spiflash_read_reg(struct spiflash_priv *priv, int reg) ++{ ++ return ar231x_read_reg((u32) priv->mmraddr + reg); ++} ++ ++static void ++spiflash_write_reg(struct spiflash_priv *priv, int reg, u32 data) ++{ ++ ar231x_write_reg((u32) priv->mmraddr + reg, data); ++} ++ ++static u32 ++spiflash_wait_busy(struct spiflash_priv *priv) ++{ ++ u32 reg; ++ ++ busy_wait(priv, (reg = spiflash_read_reg(priv, SPI_FLASH_CTL)) & ++ SPI_CTL_BUSY, 0); ++ return reg; ++} ++ ++static u32 ++spiflash_sendcmd (struct spiflash_priv *priv, int opcode, u32 addr) ++{ ++ const struct opcodes *op; ++ u32 reg, mask; ++ ++ op = &stm_opcodes[opcode]; ++ reg = spiflash_wait_busy(priv); ++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, ++ ((u32) op->code) | (addr << 8)); ++ ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= SPI_CTL_START | op->tx_cnt | (op->rx_cnt << 4); ++ ++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); ++ spiflash_wait_busy(priv); ++ ++ if (!op->rx_cnt) ++ return 0; ++ ++ reg = spiflash_read_reg(priv, SPI_FLASH_DATA); ++ ++ switch (op->rx_cnt) { ++ case 1: ++ mask = 0x000000ff; ++ break; ++ case 2: ++ mask = 0x0000ffff; ++ break; ++ case 3: ++ mask = 0x00ffffff; ++ break; ++ default: ++ mask = 0xffffffff; ++ break; ++ } ++ reg &= mask; ++ ++ return reg; ++} ++ ++ ++/* ++ * Probe SPI flash device ++ * Function returns 0 for failure. ++ * and flashconfig_tbl array index for success. ++ */ ++static int ++spiflash_probe_chip (struct spiflash_priv *priv) ++{ ++ u32 sig; ++ int flash_size; ++ ++ /* Read the signature on the flash device */ ++ spin_lock_bh(&priv->lock); ++ sig = spiflash_sendcmd(priv, SPI_RD_SIG, 0); ++ spin_unlock_bh(&priv->lock); ++ ++ switch (sig) { ++ case STM_8MBIT_SIGNATURE: ++ flash_size = FLASH_1MB; ++ break; ++ case STM_16MBIT_SIGNATURE: ++ flash_size = FLASH_2MB; ++ break; ++ case STM_32MBIT_SIGNATURE: ++ flash_size = FLASH_4MB; ++ break; ++ case STM_64MBIT_SIGNATURE: ++ flash_size = FLASH_8MB; ++ break; ++ case STM_128MBIT_SIGNATURE: ++ flash_size = FLASH_16MB; ++ break; ++ default: ++ printk (KERN_WARNING SPIFLASH "Read of flash device signature failed!\n"); ++ return 0; ++ } ++ ++ return flash_size; ++} ++ ++ ++/* wait until the flash chip is ready and grab a lock */ ++static int spiflash_wait_ready(struct spiflash_priv *priv, int state) ++{ ++ DECLARE_WAITQUEUE(wait, current); ++ ++retry: ++ spin_lock_bh(&priv->lock); ++ if (priv->state != FL_READY) { ++ set_current_state(TASK_UNINTERRUPTIBLE); ++ add_wait_queue(&priv->wq, &wait); ++ spin_unlock_bh(&priv->lock); ++ schedule(); ++ remove_wait_queue(&priv->wq, &wait); ++ ++ if(signal_pending(current)) ++ return 0; ++ ++ goto retry; ++ } ++ priv->state = state; ++ ++ return 1; ++} ++ ++static inline void spiflash_done(struct spiflash_priv *priv) ++{ ++ priv->state = FL_READY; ++ spin_unlock_bh(&priv->lock); ++ wake_up(&priv->wq); ++} ++ ++static void ++spiflash_wait_complete(struct spiflash_priv *priv) ++{ ++ busy_wait(priv, spiflash_sendcmd(priv, SPI_RD_STATUS, 0) & ++ SPI_STATUS_WIP, 20); ++ spiflash_done(priv); ++} ++ ++ ++ ++static int ++spiflash_erase (struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct spiflash_priv *priv = to_spiflash(mtd); ++ const struct opcodes *op; ++ u32 temp, reg; ++ ++ if (instr->addr + instr->len > mtd->size) ++ return -EINVAL; ++ ++ if (!spiflash_wait_ready(priv, FL_ERASING)) ++ return -EINTR; ++ ++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); ++ reg = spiflash_wait_busy(priv); ++ ++ op = &stm_opcodes[SPI_SECTOR_ERASE]; ++ temp = ((u32)instr->addr << 8) | (u32)(op->code); ++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, temp); ++ ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= op->tx_cnt | SPI_CTL_START; ++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); ++ ++ spiflash_wait_complete(priv); ++ ++ instr->state = MTD_ERASE_DONE; ++ if (instr->callback) ++ instr->callback(instr); ++ ++ return 0; ++} ++ ++static int ++spiflash_read (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf) ++{ ++ struct spiflash_priv *priv = to_spiflash(mtd); ++ u8 *read_addr; ++ ++ if (!len) ++ return 0; ++ ++ if (from + len > mtd->size) ++ return -EINVAL; ++ ++ *retlen = len; ++ ++ if (!spiflash_wait_ready(priv, FL_READING)) ++ return -EINTR; ++ ++ read_addr = (u8 *)(priv->readaddr + from); ++ memcpy_fromio(buf, read_addr, len); ++ spiflash_done(priv); ++ ++ return 0; ++} ++ ++static int ++spiflash_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u8 *buf) ++{ ++ struct spiflash_priv *priv = to_spiflash(mtd); ++ u32 opcode, bytes_left; ++ ++ *retlen = 0; ++ ++ if (!len) ++ return 0; ++ ++ if (to + len > mtd->size) ++ return -EINVAL; ++ ++ bytes_left = len; ++ ++ do { ++ u32 read_len, reg, page_offset, spi_data = 0; ++ ++ read_len = min(bytes_left, sizeof(u32)); ++ ++ /* 32-bit writes cannot span across a page boundary ++ * (256 bytes). This types of writes require two page ++ * program operations to handle it correctly. The STM part ++ * will write the overflow data to the beginning of the ++ * current page as opposed to the subsequent page. ++ */ ++ page_offset = (to & (STM_PAGE_SIZE - 1)) + read_len; ++ ++ if (page_offset > STM_PAGE_SIZE) ++ read_len -= (page_offset - STM_PAGE_SIZE); ++ ++ if (!spiflash_wait_ready(priv, FL_WRITING)) ++ return -EINTR; ++ ++ spiflash_sendcmd(priv, SPI_WRITE_ENABLE, 0); ++ spi_data = 0; ++ switch (read_len) { ++ case 4: ++ spi_data |= buf[3] << 24; ++ /* fall through */ ++ case 3: ++ spi_data |= buf[2] << 16; ++ /* fall through */ ++ case 2: ++ spi_data |= buf[1] << 8; ++ /* fall through */ ++ case 1: ++ spi_data |= buf[0] & 0xff; ++ break; ++ default: ++ break; ++ } ++ ++ spiflash_write_reg(priv, SPI_FLASH_DATA, spi_data); ++ opcode = stm_opcodes[SPI_PAGE_PROGRAM].code | ++ (to & 0x00ffffff) << 8; ++ spiflash_write_reg(priv, SPI_FLASH_OPCODE, opcode); ++ ++ reg = spiflash_read_reg(priv, SPI_FLASH_CTL); ++ reg &= ~SPI_CTL_TX_RX_CNT_MASK; ++ reg |= (read_len + 4) | SPI_CTL_START; ++ spiflash_write_reg(priv, SPI_FLASH_CTL, reg); ++ ++ spiflash_wait_complete(priv); ++ ++ bytes_left -= read_len; ++ to += read_len; ++ buf += read_len; ++ ++ *retlen += read_len; ++ } while (bytes_left != 0); ++ ++ return 0; ++} ++ ++ ++#ifdef CONFIG_MTD_PARTITIONS ++static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "MyLoader", NULL }; ++#endif ++ ++ ++static int ++spiflash_probe(struct platform_device *pdev) ++{ ++ struct spiflash_priv *priv; ++ struct mtd_partition *parts; ++ struct mtd_info *mtd; ++ int index, num_parts; ++ int result = 0; ++ ++ priv = kzalloc(sizeof(struct spiflash_priv), GFP_KERNEL); ++ spin_lock_init(&priv->lock); ++ init_waitqueue_head(&priv->wq); ++ priv->state = FL_READY; ++ mtd = &priv->mtd; ++ ++ priv->mmraddr = ioremap_nocache(SPI_FLASH_MMR, SPI_FLASH_MMR_SIZE); ++ if (!priv->mmraddr) { ++ printk(KERN_WARNING SPIFLASH "Failed to map flash device\n"); ++ goto error; ++ } ++ ++ index = spiflash_probe_chip(priv); ++ if (!index) { ++ printk (KERN_WARNING SPIFLASH "Found no serial flash device\n"); ++ goto error; ++ } ++ ++ priv->readaddr = ioremap_nocache(SPI_FLASH_READ, flashconfig_tbl[index].byte_cnt); ++ if (!priv->readaddr) { ++ printk (KERN_WARNING SPIFLASH "Failed to map flash device\n"); ++ goto error; ++ } ++ ++ platform_set_drvdata(pdev, priv); ++ mtd->name = "spiflash"; ++ mtd->type = MTD_NORFLASH; ++ mtd->flags = (MTD_CAP_NORFLASH|MTD_WRITEABLE); ++ mtd->size = flashconfig_tbl[index].byte_cnt; ++ mtd->erasesize = flashconfig_tbl[index].sector_size; ++ mtd->writesize = 1; ++ mtd->numeraseregions = 0; ++ mtd->eraseregions = NULL; ++ mtd->erase = spiflash_erase; ++ mtd->read = spiflash_read; ++ mtd->write = spiflash_write; ++ mtd->owner = THIS_MODULE; ++ ++#ifdef CONFIG_MTD_PARTITIONS ++ /* parse redboot partitions */ ++ num_parts = parse_mtd_partitions(mtd, part_probe_types, &parts, 0); ++ if (!num_parts) ++ goto error; ++ ++ result = add_mtd_partitions(mtd, parts, num_parts); ++#endif ++ ++ return result; ++ ++error: ++ if (priv->mmraddr) ++ iounmap(priv->mmraddr); ++ kfree(priv); ++ return -ENXIO; ++} ++ ++static int ++spiflash_remove (struct platform_device *pdev) ++{ ++ struct spiflash_priv *priv = platform_get_drvdata(pdev); ++ struct mtd_info *mtd = &priv->mtd; ++ ++ del_mtd_partitions(mtd); ++ iounmap(priv->mmraddr); ++ iounmap(priv->readaddr); ++ kfree(priv); ++ ++ return 0; ++} ++ ++struct platform_driver spiflash_driver = { ++ .driver.name = "spiflash", ++ .probe = spiflash_probe, ++ .remove = spiflash_remove, ++}; ++ ++int __init ++spiflash_init (void) ++{ ++ return platform_driver_register(&spiflash_driver); ++} ++ ++void __exit ++spiflash_exit (void) ++{ ++ return platform_driver_unregister(&spiflash_driver); ++} ++ ++module_init (spiflash_init); ++module_exit (spiflash_exit); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("OpenWrt.org, Atheros Communications Inc"); ++MODULE_DESCRIPTION("MTD driver for SPI Flash on Atheros SOC"); ++ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ar231x/ar2315_spiflash.h +@@ -0,0 +1,116 @@ ++/* ++ * SPI Flash Memory support header file. ++ * ++ * Copyright (c) 2005, Atheros Communications Inc. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * ++ * This code is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ */ ++#ifndef __AR2315_SPIFLASH_H ++#define __AR2315_SPIFLASH_H ++ ++#define STM_PAGE_SIZE 256 ++ ++#define SFI_WRITE_BUFFER_SIZE 4 ++#define SFI_FLASH_ADDR_MASK 0x00ffffff ++ ++#define STM_8MBIT_SIGNATURE 0x13 ++#define STM_M25P80_BYTE_COUNT 1048576 ++#define STM_M25P80_SECTOR_COUNT 16 ++#define STM_M25P80_SECTOR_SIZE 0x10000 ++ ++#define STM_16MBIT_SIGNATURE 0x14 ++#define STM_M25P16_BYTE_COUNT 2097152 ++#define STM_M25P16_SECTOR_COUNT 32 ++#define STM_M25P16_SECTOR_SIZE 0x10000 ++ ++#define STM_32MBIT_SIGNATURE 0x15 ++#define STM_M25P32_BYTE_COUNT 4194304 ++#define STM_M25P32_SECTOR_COUNT 64 ++#define STM_M25P32_SECTOR_SIZE 0x10000 ++ ++#define STM_64MBIT_SIGNATURE 0x16 ++#define STM_M25P64_BYTE_COUNT 8388608 ++#define STM_M25P64_SECTOR_COUNT 128 ++#define STM_M25P64_SECTOR_SIZE 0x10000 ++ ++#define STM_128MBIT_SIGNATURE 0x17 ++#define STM_M25P128_BYTE_COUNT 16777216 ++#define STM_M25P128_SECTOR_COUNT 256 ++#define STM_M25P128_SECTOR_SIZE 0x10000 ++ ++#define STM_1MB_BYTE_COUNT STM_M25P80_BYTE_COUNT ++#define STM_1MB_SECTOR_COUNT STM_M25P80_SECTOR_COUNT ++#define STM_1MB_SECTOR_SIZE STM_M25P80_SECTOR_SIZE ++#define STM_2MB_BYTE_COUNT STM_M25P16_BYTE_COUNT ++#define STM_2MB_SECTOR_COUNT STM_M25P16_SECTOR_COUNT ++#define STM_2MB_SECTOR_SIZE STM_M25P16_SECTOR_SIZE ++#define STM_4MB_BYTE_COUNT STM_M25P32_BYTE_COUNT ++#define STM_4MB_SECTOR_COUNT STM_M25P32_SECTOR_COUNT ++#define STM_4MB_SECTOR_SIZE STM_M25P32_SECTOR_SIZE ++#define STM_8MB_BYTE_COUNT STM_M25P64_BYTE_COUNT ++#define STM_8MB_SECTOR_COUNT STM_M25P64_SECTOR_COUNT ++#define STM_8MB_SECTOR_SIZE STM_M25P64_SECTOR_SIZE ++#define STM_16MB_BYTE_COUNT STM_M25P128_BYTE_COUNT ++#define STM_16MB_SECTOR_COUNT STM_M25P128_SECTOR_COUNT ++#define STM_16MB_SECTOR_SIZE STM_M25P128_SECTOR_SIZE ++ ++/* ++ * ST Microelectronics Opcodes for Serial Flash ++ */ ++ ++#define STM_OP_WR_ENABLE 0x06 /* Write Enable */ ++#define STM_OP_WR_DISABLE 0x04 /* Write Disable */ ++#define STM_OP_RD_STATUS 0x05 /* Read Status */ ++#define STM_OP_WR_STATUS 0x01 /* Write Status */ ++#define STM_OP_RD_DATA 0x03 /* Read Data */ ++#define STM_OP_FAST_RD_DATA 0x0b /* Fast Read Data */ ++#define STM_OP_PAGE_PGRM 0x02 /* Page Program */ ++#define STM_OP_SECTOR_ERASE 0xd8 /* Sector Erase */ ++#define STM_OP_BULK_ERASE 0xc7 /* Bulk Erase */ ++#define STM_OP_DEEP_PWRDOWN 0xb9 /* Deep Power-Down Mode */ ++#define STM_OP_RD_SIG 0xab /* Read Electronic Signature */ ++ ++#define STM_STATUS_WIP 0x01 /* Write-In-Progress */ ++#define STM_STATUS_WEL 0x02 /* Write Enable Latch */ ++#define STM_STATUS_BP0 0x04 /* Block Protect 0 */ ++#define STM_STATUS_BP1 0x08 /* Block Protect 1 */ ++#define STM_STATUS_BP2 0x10 /* Block Protect 2 */ ++#define STM_STATUS_SRWD 0x80 /* Status Register Write Disable */ ++ ++/* ++ * SPI Flash Interface Registers ++ */ ++#define AR531XPLUS_SPI_READ 0x08000000 ++#define AR531XPLUS_SPI_MMR 0x11300000 ++#define AR531XPLUS_SPI_MMR_SIZE 12 ++ ++#define AR531XPLUS_SPI_CTL 0x00 ++#define AR531XPLUS_SPI_OPCODE 0x04 ++#define AR531XPLUS_SPI_DATA 0x08 ++ ++#define SPI_FLASH_READ AR531XPLUS_SPI_READ ++#define SPI_FLASH_MMR AR531XPLUS_SPI_MMR ++#define SPI_FLASH_MMR_SIZE AR531XPLUS_SPI_MMR_SIZE ++#define SPI_FLASH_CTL AR531XPLUS_SPI_CTL ++#define SPI_FLASH_OPCODE AR531XPLUS_SPI_OPCODE ++#define SPI_FLASH_DATA AR531XPLUS_SPI_DATA ++ ++#define SPI_CTL_START 0x00000100 ++#define SPI_CTL_BUSY 0x00010000 ++#define SPI_CTL_TXCNT_MASK 0x0000000f ++#define SPI_CTL_RXCNT_MASK 0x000000f0 ++#define SPI_CTL_TX_RX_CNT_MASK 0x000000ff ++#define SPI_CTL_SIZE_MASK 0x00060000 ++ ++#define SPI_CTL_CLK_SEL_MASK 0x03000000 ++#define SPI_OPCODE_MASK 0x000000ff ++ ++#define SPI_STATUS_WIP STM_STATUS_WIP ++ ++#endif diff --git a/target/linux/atheros/patches-2.6.28/120-watchdog.patch b/target/linux/atheros/patches-2.6.28/120-watchdog.patch deleted file mode 100644 index 88c42a2a83..0000000000 --- a/target/linux/atheros/patches-2.6.28/120-watchdog.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -747,6 +747,12 @@ config TXX9_WDT - help - Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. - -+config ATHEROS_WDT -+ tristate "Atheros wisoc Watchdog Timer" -+ depends on ATHEROS -+ help -+ Hardware driver for the Atheros wisoc Watchdog Timer. -+ - # PARISC Architecture - - # POWERPC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o - obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o - obj-$(CONFIG_AR7_WDT) += ar7_wdt.o - obj-$(CONFIG_TXX9_WDT) += txx9wdt.o -+obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o - - # PARISC Architecture - diff --git a/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch deleted file mode 100644 index 5c183a431f..0000000000 --- a/target/linux/atheros/patches-2.6.28/130-ar2313_ethernet.patch +++ /dev/null @@ -1,25 +0,0 @@ ---- a/drivers/net/Kconfig -+++ b/drivers/net/Kconfig -@@ -359,6 +359,12 @@ config AX88796_93CX6 - help - Select this if your platform comes with an external 93CX6 eeprom. - -+config AR2313 -+ tristate "AR2313 Ethernet support" -+ depends on NET_ETHERNET && ATHEROS -+ help -+ Support for the AR231x/531x ethernet controller -+ - config MACE - tristate "MACE (Power Mac ethernet) support" - depends on PPC_PMAC && PPC32 ---- a/drivers/net/Makefile -+++ b/drivers/net/Makefile -@@ -199,6 +199,7 @@ obj-$(CONFIG_EQUALIZER) += eql.o - obj-$(CONFIG_KORINA) += korina.o - obj-$(CONFIG_MIPS_JAZZ_SONIC) += jazzsonic.o - obj-$(CONFIG_MIPS_AU1X00_ENET) += au1000_eth.o -+obj-$(CONFIG_AR2313) += ar2313/ - obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o - obj-$(CONFIG_SGI_IOC3_ETH) += ioc3-eth.o - obj-$(CONFIG_DECLANCE) += declance.o diff --git a/target/linux/atheros/patches-2.6.28/130-watchdog.patch b/target/linux/atheros/patches-2.6.28/130-watchdog.patch new file mode 100644 index 0000000000..31db513970 --- /dev/null +++ b/target/linux/atheros/patches-2.6.28/130-watchdog.patch @@ -0,0 +1,228 @@ +--- /dev/null ++++ b/drivers/watchdog/ar2315-wtd.c +@@ -0,0 +1,200 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ * ++ * Copyright (C) 2008 John Crispin ++ * Based on EP93xx and ifxmips wdt driver ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define CLOCK_RATE 40000000 ++#define HEARTBEAT(x) (x < 1 || x > 90)?(20):(x) ++ ++static int wdt_timeout = 20; ++static int started = 0; ++static int in_use = 0; ++ ++static void ++ar2315_wdt_enable(void) ++{ ++ ar231x_write_reg(AR2315_WD, wdt_timeout * CLOCK_RATE); ++ ar231x_write_reg(AR2315_ISR, 0x80); ++} ++ ++static ssize_t ++ar2315_wdt_write(struct file *file, const char __user *data, size_t len, loff_t *ppos) ++{ ++ if(len) ++ ar2315_wdt_enable(); ++ return len; ++} ++ ++static int ++ar2315_wdt_open(struct inode *inode, struct file *file) ++{ ++ if(in_use) ++ return -EBUSY; ++ ar2315_wdt_enable(); ++ in_use = started = 1; ++ return nonseekable_open(inode, file); ++} ++ ++static int ++ar2315_wdt_release(struct inode *inode, struct file *file) ++{ ++ in_use = 0; ++ return 0; ++} ++ ++static irqreturn_t ++ar2315_wdt_interrupt(int irq, void *dev_id) ++{ ++ if(started) ++ { ++ printk(KERN_CRIT "watchdog expired, rebooting system\n"); ++ emergency_restart(); ++ } else { ++ ar231x_write_reg(AR2315_WDC, 0); ++ ar231x_write_reg(AR2315_WD, 0); ++ ar231x_write_reg(AR2315_ISR, 0x80); ++ } ++ return IRQ_HANDLED; ++} ++ ++static struct watchdog_info ident = { ++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, ++ .identity = "ar2315 Watchdog", ++}; ++ ++static int ++ar2315_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ int new_wdt_timeout; ++ int ret = -ENOIOCTLCMD; ++ ++ switch(cmd) ++ { ++ case WDIOC_GETSUPPORT: ++ ret = copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(ident)) ? -EFAULT : 0; ++ break; ++ ++ case WDIOC_KEEPALIVE: ++ ar2315_wdt_enable(); ++ ret = 0; ++ break; ++ ++ case WDIOC_SETTIMEOUT: ++ if((ret = get_user(new_wdt_timeout, (int __user *)arg))) ++ break; ++ wdt_timeout = HEARTBEAT(new_wdt_timeout); ++ ar2315_wdt_enable(); ++ break; ++ ++ case WDIOC_GETTIMEOUT: ++ ret = put_user(wdt_timeout, (int __user *)arg); ++ break; ++ } ++ return ret; ++} ++ ++static struct file_operations ar2315_wdt_fops = { ++ .owner = THIS_MODULE, ++ .llseek = no_llseek, ++ .write = ar2315_wdt_write, ++ .ioctl = ar2315_wdt_ioctl, ++ .open = ar2315_wdt_open, ++ .release = ar2315_wdt_release, ++}; ++ ++static struct miscdevice ar2315_wdt_miscdev = { ++ .minor = WATCHDOG_MINOR, ++ .name = "watchdog", ++ .fops = &ar2315_wdt_fops, ++}; ++ ++static int ++ar2315_wdt_probe(struct platform_device *dev) ++{ ++ int ret = 0; ++ ++ ar2315_wdt_enable(); ++ ret = request_irq(AR531X_MISC_IRQ_WATCHDOG, ar2315_wdt_interrupt, IRQF_DISABLED, "ar2315_wdt", NULL); ++ if(ret) ++ { ++ printk(KERN_ERR "ar2315wdt: failed to register inetrrupt\n"); ++ goto out; ++ } ++ ++ ret = misc_register(&ar2315_wdt_miscdev); ++ if(ret) ++ printk(KERN_ERR "ar2315wdt: failed to register miscdev\n"); ++ ++out: ++ return ret; ++} ++ ++static int ++ar2315_wdt_remove(struct platform_device *dev) ++{ ++ misc_deregister(&ar2315_wdt_miscdev); ++ free_irq(AR531X_MISC_IRQ_WATCHDOG, NULL); ++ return 0; ++} ++ ++static struct platform_driver ar2315_wdt_driver = { ++ .probe = ar2315_wdt_probe, ++ .remove = ar2315_wdt_remove, ++ .driver = { ++ .name = "ar2315_wdt", ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++static int __init ++init_ar2315_wdt(void) ++{ ++ int ret = platform_driver_register(&ar2315_wdt_driver); ++ if(ret) ++ printk(KERN_INFO "ar2315_wdt: error registering platfom driver!"); ++ return ret; ++} ++ ++static void __exit ++exit_ar2315_wdt(void) ++{ ++ platform_driver_unregister(&ar2315_wdt_driver); ++} ++ ++module_init(init_ar2315_wdt); ++module_exit(exit_ar2315_wdt); +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -747,6 +747,12 @@ config TXX9_WDT + help + Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs. + ++config ATHEROS_WDT ++ tristate "Atheros wisoc Watchdog Timer" ++ depends on ATHEROS ++ help ++ Hardware driver for the Atheros wisoc Watchdog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o + obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o + obj-$(CONFIG_AR7_WDT) += ar7_wdt.o + obj-$(CONFIG_TXX9_WDT) += txx9wdt.o ++obj-$(CONFIG_ATHEROS_WDT) += ar2315-wtd.o + + # PARISC Architecture + diff --git a/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch b/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch deleted file mode 100644 index a39b46c0b8..0000000000 --- a/target/linux/atheros/patches-2.6.28/135-ar2313_2.6.26.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/ar2313/ar2313.c -+++ b/drivers/net/ar2313/ar2313.c -@@ -291,7 +291,7 @@ int __init ar2313_probe(struct platform_ - sp->mii_bus.write = mdiobus_write; - sp->mii_bus.reset = mdiobus_reset; - sp->mii_bus.name = "ar2313_eth_mii"; -- sp->mii_bus.id = 0; -+ snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0"); - sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); - *sp->mii_bus.irq = PHY_POLL; - diff --git a/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch b/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch deleted file mode 100644 index 0f4d732630..0000000000 --- a/target/linux/atheros/patches-2.6.28/137-ar2313_2.6.28.patch +++ /dev/null @@ -1,144 +0,0 @@ -This patch reflects changes in mdiobus implementation in kernel 2.6.28. ---- a/drivers/net/ar2313/ar2313.c -+++ b/drivers/net/ar2313/ar2313.c -@@ -159,10 +159,10 @@ static void rx_tasklet_func(unsigned lon - static void rx_tasklet_cleanup(struct net_device *dev); - static void ar2313_multicast_list(struct net_device *dev); - --static int mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); --static int mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); --static int mdiobus_reset(struct mii_bus *bus); --static int mdiobus_probe (struct net_device *dev); -+static int ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum); -+static int ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, u16 value); -+static int ar2313_mdiobus_reset(struct mii_bus *bus); -+static int ar2313_mdiobus_probe (struct net_device *dev); - static void ar2313_adjust_link(struct net_device *dev); - - #ifndef ERR -@@ -286,18 +286,22 @@ int __init ar2313_probe(struct platform_ - dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], - dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5], dev->irq); - -- sp->mii_bus.priv = dev; -- sp->mii_bus.read = mdiobus_read; -- sp->mii_bus.write = mdiobus_write; -- sp->mii_bus.reset = mdiobus_reset; -- sp->mii_bus.name = "ar2313_eth_mii"; -- snprintf(sp->mii_bus.id, MII_BUS_ID_SIZE, "0"); -- sp->mii_bus.irq = kmalloc(sizeof(int), GFP_KERNEL); -- *sp->mii_bus.irq = PHY_POLL; -+ sp->mii_bus = mdiobus_alloc(); -+ if (sp->mii_bus == NULL) -+ return -1; -+ -+ sp->mii_bus->priv = dev; -+ sp->mii_bus->read = ar2313_mdiobus_read; -+ sp->mii_bus->write = ar2313_mdiobus_write; -+ sp->mii_bus->reset = ar2313_mdiobus_reset; -+ sp->mii_bus->name = "ar2313_eth_mii"; -+ snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0"); -+ sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL); -+ *sp->mii_bus->irq = PHY_POLL; - -- mdiobus_register(&sp->mii_bus); -+ mdiobus_register(sp->mii_bus); - -- if (mdiobus_probe(dev) != 0) { -+ if (ar2313_mdiobus_probe(dev) != 0) { - printk(KERN_ERR "ar2313: mdiobus_probe failed"); - rx_tasklet_cleanup(dev); - ar2313_init_cleanup(dev); -@@ -432,9 +436,12 @@ static void rx_tasklet_cleanup(struct ne - static int __exit ar2313_remove(struct platform_device *pdev) - { - struct net_device *dev = platform_get_drvdata(pdev); -+ struct ar2313_private *sp = netdev_priv(dev); - rx_tasklet_cleanup(dev); - ar2313_init_cleanup(dev); - unregister_netdev(dev); -+ mdiobus_unregister(sp->mii_bus); -+ mdiobus_free(sp->mii_bus); - kfree(dev); - return 0; - } -@@ -619,7 +626,7 @@ static void ar2313_check_link(struct net - struct ar2313_private *sp = netdev_priv(dev); - u16 phyData; - -- phyData = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMSR); -+ phyData = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMSR); - if (sp->phyData != phyData) { - if (phyData & BMSR_LSTATUS) { - /* link is present, ready link partner ability to deterine -@@ -628,10 +635,10 @@ static void ar2313_check_link(struct net - u16 reg; - - sp->link = 1; -- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_BMCR); -+ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_BMCR); - if (reg & BMCR_ANENABLE) { - /* auto neg enabled */ -- reg = mdiobus_read(&sp->mii_bus, sp->phy, MII_LPA); -+ reg = ar2313_mdiobus_read(sp->mii_bus, sp->phy, MII_LPA); - duplex = (reg & (LPA_100FULL | LPA_10FULL)) ? 1 : 0; - } else { - /* no auto neg, just read duplex config */ -@@ -1320,7 +1327,7 @@ static void ar2313_adjust_link(struct ne - ((reg << MII_ADDR_REG_SHIFT) | (phy << MII_ADDR_PHY_SHIFT)) - - static int --mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) -+ar2313_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum) - { - struct net_device *const dev = bus->priv; - struct ar2313_private *sp = netdev_priv(dev); -@@ -1332,7 +1339,7 @@ mdiobus_read(struct mii_bus *bus, int ph - } - - static int --mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, -+ar2313_mdiobus_write(struct mii_bus *bus, int phy_addr, int regnum, - u16 value) - { - struct net_device *const dev = bus->priv; -@@ -1346,7 +1353,7 @@ mdiobus_write(struct mii_bus *bus, int p - return 0; - } - --static int mdiobus_reset(struct mii_bus *bus) -+static int ar2313_mdiobus_reset(struct mii_bus *bus) - { - struct net_device *const dev = bus->priv; - -@@ -1355,7 +1362,7 @@ static int mdiobus_reset(struct mii_bus - return 0; - } - --static int mdiobus_probe (struct net_device *dev) -+static int ar2313_mdiobus_probe (struct net_device *dev) - { - struct ar2313_private *const sp = netdev_priv(dev); - struct phy_device *phydev = NULL; -@@ -1363,8 +1370,8 @@ static int mdiobus_probe (struct net_dev - - /* find the first (lowest address) PHY on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) -- if (sp->mii_bus.phy_map[phy_addr]) { -- phydev = sp->mii_bus.phy_map[phy_addr]; -+ if (sp->mii_bus->phy_map[phy_addr]) { -+ phydev = sp->mii_bus->phy_map[phy_addr]; - break; /* break out with first one found */ - } - ---- a/drivers/net/ar2313/ar2313.h -+++ b/drivers/net/ar2313/ar2313.h -@@ -162,7 +162,7 @@ struct ar2313_private { - int unloading; - - struct phy_device *phy_dev; -- struct mii_bus mii_bus; -+ struct mii_bus *mii_bus; - int oldduplex; - }; - diff --git a/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch index 710314d7f7..88ffad62d0 100644 --- a/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch +++ b/target/linux/atheros/patches-2.6.28/200-ar2313_enable_mvswitch.patch @@ -1,14 +1,14 @@ ---- a/drivers/net/ar2313/ar2313.c -+++ b/drivers/net/ar2313/ar2313.c -@@ -841,6 +841,7 @@ static void ar2313_load_rx_ring(struct n +--- a/drivers/net/ar231x.c ++++ b/drivers/net/ar231x.c +@@ -735,6 +735,7 @@ static void ar231x_load_rx_ring(struct n for (i = 0; i < nr_bufs; i++) { struct sk_buff *skb; - ar2313_descr_t *rd; + ar231x_descr_t *rd; + int offset = RX_OFFSET; - if (sp->rx_skb[idx]) { - #if DEBUG_RX -@@ -862,7 +863,9 @@ static void ar2313_load_rx_ring(struct n + if (sp->rx_skb[idx]) + break; +@@ -753,7 +754,9 @@ static void ar231x_load_rx_ring(struct n * Make sure IP header starts on a fresh cache line. */ skb->dev = dev; @@ -18,8 +18,8 @@ + skb_reserve(skb, offset); sp->rx_skb[idx] = skb; - rd = (ar2313_descr_t *) & sp->rx_ring[idx]; -@@ -953,6 +956,7 @@ static int ar2313_rx_int(struct net_devi + rd = (ar231x_descr_t *) & sp->rx_ring[idx]; +@@ -828,6 +831,7 @@ static int ar231x_rx_int(struct net_devi /* alloc new buffer. */ skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128); if (skb_new != NULL) { @@ -27,7 +27,7 @@ skb = sp->rx_skb[idx]; /* set skb */ -@@ -960,13 +964,17 @@ static int ar2313_rx_int(struct net_devi +@@ -835,13 +839,17 @@ static int ar231x_rx_int(struct net_devi ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN); dev->stats.rx_bytes += skb->len; @@ -48,7 +48,7 @@ /* reset descriptor's curr_addr */ rxdesc->addr = virt_to_phys(skb_new->data); -@@ -1392,6 +1400,8 @@ static int ar2313_mdiobus_probe (struct +@@ -1243,6 +1251,8 @@ static int ar231x_mdiobus_probe (struct return PTR_ERR(phydev); } @@ -57,11 +57,11 @@ /* mask with MAC supported features */ phydev->supported &= (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full ---- a/drivers/net/ar2313/ar2313.h -+++ b/drivers/net/ar2313/ar2313.h -@@ -107,6 +107,8 @@ typedef struct { +--- a/drivers/net/ar231x.h ++++ b/drivers/net/ar231x.h +@@ -221,6 +221,8 @@ typedef struct { */ - struct ar2313_private { + struct ar231x_private { struct net_device *dev; + int (*rx)(struct sk_buff *skb); + -- 2.30.2