From a6899465233f8a8eeade5a4795d1084b3bf98660 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 19 May 2007 13:14:38 +0000 Subject: [PATCH 1/1] convert rb532 to the new structure SVN-Revision: 7273 --- .../files/arch/mips/pci/fixup-rb500.c | 49 + .../files/arch/mips/pci/ops-rc32434.c | 218 ++ .../files/arch/mips/pci/pci-rc32434.c | 234 ++ .../rb532-2.6/files/arch/mips/rb500/Makefile | 5 + .../rb532-2.6/files/arch/mips/rb500/devices.c | 210 + .../rb532-2.6/files/arch/mips/rb500/irq.c | 264 ++ .../rb532-2.6/files/arch/mips/rb500/misc.c | 56 + .../rb532-2.6/files/arch/mips/rb500/prom.c | 165 + .../files/arch/mips/rb500/prom.c.orig | 161 + .../rb532-2.6/files/arch/mips/rb500/serial.c | 77 + .../rb532-2.6/files/arch/mips/rb500/setup.c | 81 + .../rb532-2.6/files/arch/mips/rb500/time.c | 93 + .../files/drivers/block/rb500/Makefile | 3 + .../rb532-2.6/files/drivers/block/rb500/ata.c | 485 +++ .../rb532-2.6/files/drivers/block/rb500/ata.h | 143 + .../files/drivers/block/rb500/bdev.c | 339 ++ .../files/drivers/mtd/nand/rbmipsnand.c | 137 + .../rb532-2.6/files/drivers/net/korina.c | 1160 ++++++ .../rb532-2.6/files/drivers/net/rc32434_eth.h | 178 + .../files/include/asm-mips/rc32434/ddr.h | 173 + .../files/include/asm-mips/rc32434/dma.h | 168 + .../files/include/asm-mips/rc32434/dma_v.h | 72 + .../files/include/asm-mips/rc32434/eth.h | 320 ++ .../files/include/asm-mips/rc32434/eth_v.h | 63 + .../files/include/asm-mips/rc32434/gpio.h | 181 + .../files/include/asm-mips/rc32434/irq.h | 8 + .../files/include/asm-mips/rc32434/pci.h | 692 ++++ .../files/include/asm-mips/rc32434/rb.h | 84 + .../files/include/asm-mips/rc32434/rc32434.h | 122 + .../rb532-2.6/patches/100-rb5xx_support.patch | 3415 ----------------- .../patches/110-korina_ethernet.patch | 1347 +------ target/linux/rb532-2.6/patches/120-cf.patch | 987 +---- .../rb532-2.6/patches/140-cmdline_hack.patch | 22 +- target/linux/rb532-2.6/patches/500-Nand.patch | 142 +- 34 files changed, 5945 insertions(+), 5909 deletions(-) create mode 100644 target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/Makefile create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/devices.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/irq.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/misc.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/prom.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/serial.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/setup.c create mode 100644 target/linux/rb532-2.6/files/arch/mips/rb500/time.c create mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/Makefile create mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/ata.c create mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/ata.h create mode 100644 target/linux/rb532-2.6/files/drivers/block/rb500/bdev.c create mode 100644 target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c create mode 100644 target/linux/rb532-2.6/files/drivers/net/korina.c create mode 100644 target/linux/rb532-2.6/files/drivers/net/rc32434_eth.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/ddr.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma_v.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth_v.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/gpio.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/irq.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/pci.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/rb.h create mode 100644 target/linux/rb532-2.6/files/include/asm-mips/rc32434/rc32434.h diff --git a/target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c b/target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c new file mode 100644 index 0000000000..ceb53b0aa9 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/pci/fixup-rb500.c @@ -0,0 +1,49 @@ +/* + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * stevel@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include + +#include + +static int __devinitdata irq_map[2][12] = { + { 0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1 }, + { 0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3 } +}; + +int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq = 0; + + if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12) { + irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)]; + } + return irq + GROUP4_IRQ_BASE + 4; +} + diff --git a/target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c b/target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c new file mode 100644 index 0000000000..b90ab1d129 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/pci/ops-rc32434.c @@ -0,0 +1,218 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * pci_ops for IDT EB434 board + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * Copyright 2006 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2004 rkt, neb + * + * Initial Release + * + * + * + ************************************************************************** + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + + +#define PCI_CFG_SET(bus,slot,func,off) \ + (rc32434_pci->pcicfga = (0x80000000 | \ + ((bus) << 16) | ((slot)<<11) | \ + ((func)<<8) | (off))) + +static inline int config_access(unsigned char access_type, struct pci_bus *bus, + unsigned int devfn, unsigned char where, + u32 * data) +{ + unsigned int slot = PCI_SLOT(devfn); + u8 func = PCI_FUNC(devfn); + + /* Setup address */ + PCI_CFG_SET(bus->number, slot, func, where); + rc32434_sync(); + + if (access_type == PCI_ACCESS_WRITE) + rc32434_pci->pcicfgd = *data; + else + *data = rc32434_pci->pcicfgd; + + rc32434_sync(); + + return 0; +} + + +/* + * We can't address 8 and 16 bit words directly. Instead we have to + * read/write a 32bit word and mask/modify the data we actually want. + */ +static int read_config_byte(struct pci_bus *bus, unsigned int devfn, + int where, u8 * val) +{ + u32 data; + int ret; + + ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); + *val = (data >> ((where & 3) << 3)) & 0xff; + return ret; +} + +static int read_config_word(struct pci_bus *bus, unsigned int devfn, + int where, u16 * val) +{ + u32 data; + int ret; + + ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); + *val = (data >> ((where & 3) << 3)) & 0xffff; + return ret; +} + +static int read_config_dword(struct pci_bus *bus, unsigned int devfn, + int where, u32 * val) +{ + int ret; + int delay = 1; + + if (bus->number == 0 && PCI_SLOT(devfn) > 21) + return 0; + +retry: + ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val); + + /* PCI scan: check for invalid values, device may not have + * finished initializing */ + + if (where == PCI_VENDOR_ID) { + if (ret == 0xffffffff || ret == 0x00000000 || + ret == 0x0000ffff || ret == 0xffff0000) { + + if (delay > 4) + return 0; + + delay *= 2; + msleep(delay); + goto retry; + } + } + + return ret; +} + +static int +write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, + u8 val) +{ + u32 data = 0; + + if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + + +static int +write_config_word(struct pci_bus *bus, unsigned int devfn, int where, + u16 val) +{ + u32 data = 0; + + if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) + return -1; + + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) + return -1; + + + return PCIBIOS_SUCCESSFUL; +} + + +static int +write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, + u32 val) +{ + if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int pci_config_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) +{ + switch (size) { + case 1: + return read_config_byte(bus, devfn, where, (u8 *) val); + case 2: + return read_config_word(bus, devfn, where, (u16 *) val); + default: + return read_config_dword(bus, devfn, where, val); + } +} + +static int pci_config_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + switch (size) { + case 1: + return write_config_byte(bus, devfn, where, (u8) val); + case 2: + return write_config_word(bus, devfn, where, (u16) val); + default: + return write_config_dword(bus, devfn, where, val); + } +} + +struct pci_ops rc32434_pci_ops = { + .read = pci_config_read, + .write = pci_config_write, +}; diff --git a/target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c b/target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c new file mode 100644 index 0000000000..fbc8268328 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/pci/pci-rc32434.c @@ -0,0 +1,234 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * PCI initialization for IDT EB434 board + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2004 rkt, neb + * + * Initial Release + * + * + * + ************************************************************************** + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +/* define an unsigned array for the PCI registers */ +unsigned int korinaCnfgRegs[25] = { + KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4, + KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8, + KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12, + KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16, + KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20, + KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24 +}; +static struct resource rc32434_res_pci_mem1; +static struct resource rc32434_res_pci_mem2; + +static struct resource rc32434_res_pci_mem1 = { + .name = "PCI MEM1", + .start = 0x50000000, + .end = 0x5FFFFFFF, + .flags = IORESOURCE_MEM, + .parent = &rc32434_res_pci_mem1, + .sibling = NULL, + .child = &rc32434_res_pci_mem2 +}; + +static struct resource rc32434_res_pci_mem2 = { + .name = "PCI Mem2", + .start = 0x60000000, + .end = 0x6FFFFFFF, + .flags = IORESOURCE_MEM, + .parent = &rc32434_res_pci_mem1, + .sibling = NULL, + .child = NULL +}; + +static struct resource rc32434_res_pci_io1 = { + .name = "PCI I/O1", + .start = 0x18800000, + .end = 0x188FFFFF, + .flags = IORESOURCE_IO, +}; + +extern struct pci_ops rc32434_pci_ops; + +#define PCI_MEM1_START PCI_ADDR_START +#define PCI_MEM1_END PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1 +#define PCI_MEM2_START PCI_ADDR_START + CPUTOPCI_MEM_WIN +#define PCI_MEM2_END PCI_ADDR_START + ( 2* CPUTOPCI_MEM_WIN) - 1 +#define PCI_IO1_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) +#define PCI_IO1_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -1 +#define PCI_IO2_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN +#define PCI_IO2_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) -1 + + +struct pci_controller rc32434_controller2; + +struct pci_controller rc32434_controller = { + .pci_ops = &rc32434_pci_ops, + .mem_resource = &rc32434_res_pci_mem1, + .io_resource = &rc32434_res_pci_io1, + .mem_offset = 0, + .io_offset = 0, + +}; + +#ifdef __MIPSEB__ +#define PCI_ENDIAN_FLAG PCILBAC_sb_m +#else +#define PCI_ENDIAN_FLAG 0 +#endif + +static int __init rc32434_pcibridge_init(void) +{ + unsigned int pcicValue, pcicData = 0; + unsigned int dummyRead, pciCntlVal; + int loopCount; + unsigned int pciConfigAddr; + + pcicValue = rc32434_pci->pcic; + pcicValue = (pcicValue >> PCIM_SHFT) & PCIM_BIT_LEN; + if (!((pcicValue == PCIM_H_EA) || + (pcicValue == PCIM_H_IA_FIX) || + (pcicValue == PCIM_H_IA_RR))) { + printk("PCI init error!!!\n"); + /* Not in Host Mode, return ERROR */ + return -1; + } + /* Enables the Idle Grant mode, Arbiter Parking */ + pcicData |=(PCIC_igm_m|PCIC_eap_m|PCIC_en_m); + rc32434_pci->pcic = pcicData; /* Enable the PCI bus Interface */ + /* Zero out the PCI status & PCI Status Mask */ + for(;;) + { + pcicData = rc32434_pci->pcis; + if (!(pcicData & PCIS_rip_m)) + break; + } + + rc32434_pci->pcis = 0; + rc32434_pci->pcism = 0xFFFFFFFF; + /* Zero out the PCI decoupled registers */ + rc32434_pci->pcidac=0; /* disable PCI decoupled accesses at initialization */ + rc32434_pci->pcidas=0; /* clear the status */ + rc32434_pci->pcidasm=0x0000007F; /* Mask all the interrupts */ + /* Mask PCI Messaging Interrupts */ + rc32434_pci_msg->pciiic = 0; + rc32434_pci_msg->pciiim = 0xFFFFFFFF; + rc32434_pci_msg->pciioic = 0; + rc32434_pci_msg->pciioim = 0; + + + /* Setup PCILB0 as Memory Window */ + rc32434_pci->pcilba[0].a = (unsigned int) (PCI_ADDR_START); + + /* setup the PCI map address as same as the local address */ + + rc32434_pci->pcilba[0].m = (unsigned int) (PCI_ADDR_START); + + + /* Setup PCILBA1 as MEM */ + rc32434_pci->pcilba[0].c = ( ((SIZE_256MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG); + dummyRead = rc32434_pci->pcilba[0].c; /* flush the CPU write Buffers */ + rc32434_pci->pcilba[1].a = 0x60000000; + rc32434_pci->pcilba[1].m = 0x60000000; + + /* setup PCILBA2 as IO Window*/ + rc32434_pci->pcilba[1].c = (((SIZE_256MB & 0x1f) << PCILBAC_size_b )| PCI_ENDIAN_FLAG); + dummyRead = rc32434_pci->pcilba[1].c; /* flush the CPU write Buffers */ + rc32434_pci->pcilba[2].a = 0x18C00000; + rc32434_pci->pcilba[2].m = 0x18FFFFFF; + + /* setup PCILBA2 as IO Window*/ + rc32434_pci->pcilba[2].c = (((SIZE_4MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG ); + dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */ + + /* Setup PCILBA3 as IO Window */ + rc32434_pci->pcilba[3].a = 0x18800000; + rc32434_pci->pcilba[3].m = 0x18800000; + rc32434_pci->pcilba[3].c = ( (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m) | PCI_ENDIAN_FLAG); + dummyRead = rc32434_pci->pcilba[3].c; /* flush the CPU write Buffers */ + + pciConfigAddr=(unsigned int)(0x80000004); + for(loopCount=0;loopCount<24;loopCount++){ + rc32434_pci->pcicfga=pciConfigAddr; + dummyRead=rc32434_pci->pcicfga; + rc32434_pci->pcicfgd = korinaCnfgRegs[loopCount]; + dummyRead=rc32434_pci->pcicfgd; + pciConfigAddr += 4; + } + rc32434_pci->pcitc = (unsigned int)((PCITC_RTIMER_VAL&0xff) << PCITC_rtimer_b) + | ((PCITC_DTIMER_VAL&0xff) << PCITC_dtimer_b); + + pciCntlVal=rc32434_pci->pcic; + pciCntlVal &=~(PCIC_tnr_m); + rc32434_pci->pcic = pciCntlVal; + pciCntlVal=rc32434_pci->pcic; + return 0; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) { + /* disable prefetched memory range */ + pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0); + pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10); + + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); + } + return 0; +} + +static int __init rc32434_pci_init(void) +{ + printk("PCI: Initializing PCI\n"); + + ioport_resource.start = rc32434_res_pci_io1.start; + ioport_resource.end = rc32434_res_pci_io1.end; + + rc32434_pcibridge_init(); + + register_pci_controller(&rc32434_controller); + rc32434_sync(); +} + +arch_initcall(rc32434_pci_init); + diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/Makefile b/target/linux/rb532-2.6/files/arch/mips/rb500/Makefile new file mode 100644 index 0000000000..3a6a2855a3 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the RB500 board specific parts of the kernel +# + +obj-y += irq.o time.o setup.o serial.o prom.o misc.o devices.o diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c b/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c new file mode 100644 index 0000000000..079eb09602 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c @@ -0,0 +1,210 @@ +/* + * RouterBoard 500 Platform devices + * + * Copyright (C) 2006 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * $Id$ + */ +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0 +#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1 +#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9 +#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10 + +#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET) +#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET) + +static struct resource korina_dev0_res[] = { + { + .name = "korina_regs", + .start = ETH0_PhysicalAddress, + .end = ETH0_PhysicalAddress + sizeof(ETH_t), + .flags = IORESOURCE_MEM, + }, + { + .name = "korina_rx", + .start = ETH0_DMA_RX_IRQ, + .end = ETH0_DMA_RX_IRQ, + .flags = IORESOURCE_IRQ + }, + { + .name = "korina_tx", + .start = ETH0_DMA_TX_IRQ, + .end = ETH0_DMA_TX_IRQ, + .flags = IORESOURCE_IRQ + }, + { + .name = "korina_ovr", + .start = ETH0_RX_OVR_IRQ, + .end = ETH0_RX_OVR_IRQ, + .flags = IORESOURCE_IRQ + }, + { + .name = "korina_und", + .start = ETH0_TX_UND_IRQ, + .end = ETH0_TX_UND_IRQ, + .flags = IORESOURCE_IRQ + }, + { + .name = "korina_dma_rx", + .start = ETH0_RX_DMA_ADDR, + .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1, + .flags = IORESOURCE_MEM, + }, + { + .name = "korina_dma_tx", + .start = ETH0_TX_DMA_ADDR, + .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1, + .flags = IORESOURCE_MEM, + } +}; + +static struct korina_device korina_dev0_data = { + .name = "korina0", + .mac = { 0xde, 0xca, 0xff, 0xc0, 0xff, 0xee } +}; + +static struct platform_device korina_dev0 = { + .id = 0, + .name = "korina", + .dev.platform_data = &korina_dev0_data, + .resource = korina_dev0_res, + .num_resources = ARRAY_SIZE(korina_dev0_res), +}; + + +#define CF_GPIO_NUM 13 + +static struct resource cf_slot0_res[] = { + { + .name = "cf_membase", + .flags = IORESOURCE_MEM + }, + { + .name = "cf_irq", + .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */ + .end = (8 + 4 * 32 + CF_GPIO_NUM), + .flags = IORESOURCE_IRQ + } +}; + +static struct cf_device cf_slot0_data = { + .gpio_pin = 13 +}; + +static struct platform_device cf_slot0 = { + .id = 0, + .name = "rb500-cf", + .dev.platform_data = &cf_slot0_data, + .resource = cf_slot0_res, + .num_resources = ARRAY_SIZE(cf_slot0_res), +}; + +/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */ +static struct resource nand_slot0_res[] = { + { + .name = "nand_membase", + .flags = IORESOURCE_MEM + } +}; + +static struct platform_device nand_slot0 = { + .id = 0, + .name = "rb500-nand", + .resource = nand_slot0_res, + .num_resources = ARRAY_SIZE(nand_slot0_res), +}; + + +static struct platform_device *rb500_devs[] = { + &korina_dev0, + &nand_slot0, + &cf_slot0 +}; + +static void __init parse_mac_addr(char* macstr) +{ + int i, j; + unsigned char result, value; + + for (i=0; i<6; i++) { + result = 0; + if (i != 5 && *(macstr+2) != ':') { + return; + } + for (j=0; j<2; j++) { + if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' : + toupper(*macstr)-'A'+10) < 16) { + result = result*16 + value; + macstr++; + } + else return; + } + + macstr++; + korina_dev0_data.mac[i] = result; + } +} + + +/* DEVICE CONTROLLER 1 */ +#define CFG_DC_DEV1 (void*)0xb8010010 +#define CFG_DC_DEV2 (void*)0xb8010020 +#define CFG_DC_DEVBASE 0x0 +#define CFG_DC_DEVMASK 0x4 +#define CFG_DC_DEVC 0x8 +#define CFG_DC_DEVTC 0xC + + +static int __init plat_setup_devices(void) +{ + /* Look for the CF card reader */ + if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK)) + rb500_devs[1] = NULL; + else { + cf_slot0_res[0].start = readl(CFG_DC_DEV1 + CFG_DC_DEVBASE); + cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000; + } + + /* There is always a NAND device */ + nand_slot0_res[0].start = readl( CFG_DC_DEV2 + CFG_DC_DEVBASE); + nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; + + return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs)); +} + +static int __init setup_kmac(char *s) +{ + printk("korina mac = %s\n",s); + parse_mac_addr(s); + return 0; +} + +__setup("kmac=", setup_kmac); +arch_initcall(plat_setup_devices); + + diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/irq.c b/target/linux/rb532-2.6/files/arch/mips/rb500/irq.c new file mode 100644 index 0000000000..47521c7c57 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/irq.c @@ -0,0 +1,264 @@ +/* + * BRIEF MODULE DESCRIPTION + * RC32434 interrupt routines. + * + * Copyright 2002 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * stevel@mvista.com or source@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void set_debug_traps(void); +extern irq_cpustat_t irq_stat [NR_CPUS]; +unsigned int local_bh_count[NR_CPUS]; +unsigned int local_irq_count[NR_CPUS]; + +static unsigned int startup_irq(unsigned int irq); +static void rb500_end_irq(unsigned int irq_nr); +static void mask_and_ack_irq(unsigned int irq_nr); +static void rb500_enable_irq(unsigned int irq_nr); +static void rb500_disable_irq(unsigned int irq_nr); + +extern void __init init_generic_irq(void); + +typedef struct { + u32 mask; /* mask of valid bits in pending/mask registers */ + volatile u32 *base_addr; +} intr_group_t; + +#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32) + +#if (NR_IRQS < RC32434_NR_IRQS) +#error Too little irqs defined. Did you override ? +#endif + +static const intr_group_t intr_group[NUM_INTR_GROUPS] = { + { 0x0000efff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET) }, + { 0x00001fff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET) }, + { 0x00000007, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET) }, + { 0x0003ffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET) }, + { 0xffffffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET) } +}; + +#define READ_PEND(base) (*(base)) +#define READ_MASK(base) (*(base + 2)) +#define WRITE_MASK(base, val) (*(base + 2) = (val)) + +static inline int irq_to_group(unsigned int irq_nr) +{ + return ((irq_nr - GROUP0_IRQ_BASE) >> 5); +} + +static inline int group_to_ip(unsigned int group) +{ + return group + 2; +} + +static inline void enable_local_irq(unsigned int ip) +{ + int ipnum = 0x100 << ip; + clear_c0_cause(ipnum); + set_c0_status(ipnum); +} + +static inline void disable_local_irq(unsigned int ip) +{ + int ipnum = 0x100 << ip; + clear_c0_status(ipnum); +} + +static inline void ack_local_irq(unsigned int ip) +{ + int ipnum = 0x100 << ip; + clear_c0_cause(ipnum); +} + +static void rb500_enable_irq(unsigned int irq_nr) +{ + int ip = irq_nr - GROUP0_IRQ_BASE; + unsigned int group, intr_bit; + volatile unsigned int *addr; + + + if (ip < 0) + enable_local_irq(irq_nr); + else { + group = ip >> 5; + + ip &= (1<<5)-1; + intr_bit = 1 << ip; + + enable_local_irq(group_to_ip(group)); + + addr = intr_group[group].base_addr; + WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit); + } +} + +static void rb500_disable_irq(unsigned int irq_nr) +{ + int ip = irq_nr - GROUP0_IRQ_BASE; + unsigned int group, intr_bit, mask; + volatile unsigned int *addr; + + if (ip < 0) { + disable_local_irq(irq_nr); + }else{ + group = ip >> 5; + + ip &= (1<<5) -1; + intr_bit = 1 << ip; + addr = intr_group[group].base_addr; + mask = READ_MASK(addr); + mask |= intr_bit; + WRITE_MASK(addr,mask); + + /* + * if there are no more interrupts enabled in this + * group, disable corresponding IP + */ + if (mask == intr_group[group].mask) + disable_local_irq(group_to_ip(group)); + } +} + +static unsigned int startup_irq(unsigned int irq_nr) +{ + rb500_enable_irq(irq_nr); + return 0; +} + +static void shutdown_irq(unsigned int irq_nr) +{ + rb500_disable_irq(irq_nr); + return; +} + +static void mask_and_ack_irq(unsigned int irq_nr) +{ + rb500_disable_irq(irq_nr); + ack_local_irq(group_to_ip(irq_to_group(irq_nr))); +} + +static void rb500_end_irq(unsigned int irq_nr) +{ + + int ip = irq_nr - GROUP0_IRQ_BASE; + unsigned int intr_bit, group; + volatile unsigned int *addr; + + if ((irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { + printk("warning: end_irq %d did not enable (%x)\n", + irq_nr, irq_desc[irq_nr].status); + return; + } + + if (ip < 0) { + enable_local_irq(irq_nr); + } else { + group = ip >> 5; + + ip &= (1 << 5) - 1; + intr_bit = 1 << ip; + + if (irq_nr >= GROUP4_IRQ_BASE && irq_nr <= (GROUP4_IRQ_BASE + 13)) { + gpio->gpioistat = gpio->gpioistat & ~intr_bit; + } + + enable_local_irq(group_to_ip(group)); + + addr = intr_group[group].base_addr; + WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit); + } +} + +static struct hw_interrupt_type rc32434_irq_type = { + .typename = "RB500", + .startup = startup_irq, + .shutdown = shutdown_irq, + .enable = rb500_enable_irq, + .disable = rb500_disable_irq, + .ack = mask_and_ack_irq, + .end = rb500_end_irq, +}; + + +void __init arch_init_irq(void) +{ + int i; + + printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS); + memset(irq_desc, 0, sizeof(irq_desc)); + + for (i = 0; i < RC32434_NR_IRQS; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = NULL; + irq_desc[i].depth = 1; + irq_desc[i].chip = &rc32434_irq_type; + spin_lock_init(&irq_desc[i].lock); + } +} + +/* Main Interrupt dispatcher */ +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int ip, pend, group; + volatile unsigned int *addr; + unsigned int cp0_cause = read_c0_cause() & read_c0_status(); + + if (cp0_cause & CAUSEF_IP7) { + ll_timer_interrupt(7); + } else if ((ip = (cp0_cause & 0x7c00))) { + group = 21 - rc32434_clz(ip); + + addr = intr_group[group].base_addr; + + pend = READ_PEND(addr); + pend &= ~READ_MASK(addr); // only unmasked interrupts + pend = 39 - rc32434_clz(pend); + do_IRQ((group << 5) + pend); + } +} diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/misc.c b/target/linux/rb532-2.6/files/arch/mips/rb500/misc.c new file mode 100644 index 0000000000..42039b7aae --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/misc.c @@ -0,0 +1,56 @@ +#include +#include /* printk() */ +#include /* size_t */ +#include +#include +#include + +#define GPIO_BADDR 0xb8050000 + + +static volatile unsigned char *devCtl3Base = 0; +static unsigned char latchU5State = 0; +static spinlock_t clu5Lock = SPIN_LOCK_UNLOCKED; + +void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val) { + unsigned flags, data; + unsigned i = 0; + spin_lock_irqsave(&clu5Lock, flags); + data = *(volatile unsigned *) (IDT434_REG_BASE + regOffs); + for (i = 0; i != len; ++i) { + if (val & (1 << i)) data |= (1 << (i + bit)); + else data &= ~(1 << (i + bit)); + } + *(volatile unsigned *) (IDT434_REG_BASE + regOffs) = data; + spin_unlock_irqrestore(&clu5Lock, flags); +} + +void changeLatchU5(unsigned char orMask, unsigned char nandMask) { + unsigned flags; + spin_lock_irqsave(&clu5Lock, flags); + latchU5State = (latchU5State | orMask) & ~nandMask; + if( !devCtl3Base) devCtl3Base = (volatile unsigned char *) + KSEG1ADDR(*(volatile unsigned *) KSEG1ADDR(0x18010030)); + *devCtl3Base = latchU5State; + spin_unlock_irqrestore(&clu5Lock, flags); +} + +u32 gpio_get(gpio_func func) +{ + return readl((void *) GPIO_BADDR + func); +} + +void gpio_set(gpio_func func, u32 mask, u32 value) +{ + u32 val = readl((void *) GPIO_BADDR + func); + + val &= ~mask; + val |= value & mask; + + writel(val, (void *) GPIO_BADDR + func); +} + +EXPORT_SYMBOL(gpio_set); +EXPORT_SYMBOL(gpio_get); +EXPORT_SYMBOL(set434Reg); +EXPORT_SYMBOL(changeLatchU5); diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c new file mode 100644 index 0000000000..1978b0f17c --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c @@ -0,0 +1,165 @@ +/* +* prom.c +********************************************************************** +* P . Sadik Oct 10, 2003 +* +* Started change log +* idt_cpu_freq is make a kernel configuration parameter +* idt_cpu_freq is exported so that other modules can use it. +* Code cleanup +********************************************************************** +* P. Sadik Oct 20, 2003 +* +* Removed NVRAM code from here, since they are already available under +* nvram directory. +* Added serial port initialisation. +********************************************************************** +********************************************************************** +* P. Sadik Oct 30, 2003 +* +* Added reset_cons_port +********************************************************************** + + P.Christeas, 2005-2006 + Port to 2.6, add 2.6 cmdline parsing + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PROM_ENTRY(x) (0xbfc00000+((x)*8)) +extern void __init setup_serial_port(void); + +unsigned int idt_cpu_freq = 132000000; +EXPORT_SYMBOL(idt_cpu_freq); +unsigned int board_type = 500; +EXPORT_SYMBOL(board_type); +unsigned int gpio_bootup_state = 0; +EXPORT_SYMBOL(gpio_bootup_state); + + +char mips_mac_address[18] = "08:00:06:05:40:01"; +EXPORT_SYMBOL(mips_mac_address); + +/* what to append to cmdline when button is [not] pressed */ +#define GPIO_INIT_NOBUTTON "" +#define GPIO_INIT_BUTTON " 2" + +#ifdef CONFIG_MIKROTIK_RB500 +unsigned soft_reboot = 0; +EXPORT_SYMBOL(soft_reboot); +#endif + +#define SR_NMI 0x00180000 /* NMI */ +#define SERIAL_SPEED_ENTRY 0x00000001 + +#ifdef CONFIG_REMOTE_DEBUG +extern int remote_debug; +#endif + +extern unsigned long mips_machgroup; +extern unsigned long mips_machtype; + +#define FREQ_TAG "HZ=" +#define GPIO_TAG "gpio=" +#define KMAC_TAG "kmac=" +#define MEM_TAG "mem=" +#define BOARD_TAG "board=" +#define IGNORE_CMDLINE_MEM 1 +#define DEBUG_DDR + +void parse_soft_settings(unsigned *ptr, unsigned size); +void parse_hard_settings(unsigned *ptr, unsigned size); + +void __init prom_setup_cmdline(void); + +void __init prom_init(void) +{ + DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */ + phys_t memsize = 0-ddr->ddrmask; + + /* this should be the very first message, even before serial is properly initialized */ + prom_setup_cmdline(); + setup_serial_port(); + + mips_machgroup = MACH_GROUP_MIKROTIK; + soft_reboot = read_c0_status() & SR_NMI; + pm_power_off = NULL; + + /* + * give all RAM to boot allocator, + * except for the first 0x400 and the last 0x200 bytes + */ + add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM); +} + +void prom_free_prom_memory(void) +{ + /* FIXME: STUB */ +} + +extern char _image_cmdline; +void __init prom_setup_cmdline(void){ + char cmd_line[CL_SIZE]; + char *cp; + int prom_argc; + char **prom_argv, **prom_envp; + int i; + + prom_argc = fw_arg0; + prom_argv = (char **) fw_arg1; + prom_envp = (char **) fw_arg2; + + cp=cmd_line; + /* Note: it is common that parameters start at argv[1] and not argv[0], + however, our elf loader starts at [0] */ + for(i=0;i0) *(cp++) = ' '; + if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) { + board_type = simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10); + } + if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) { + gpio_bootup_state = simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10); + } + strcpy(cp,prom_argv[i]); + cp+=strlen(prom_argv[i]); + } + *(cp++) = ' '; + strcpy(cp,(&_image_cmdline + 8)); + cp += strlen(&_image_cmdline); + + i=strlen(arcs_cmdline); + if (i>0){ + *(cp++) = ' '; + strcpy(cp,arcs_cmdline); + cp+=strlen(arcs_cmdline); + } + if (gpio_bootup_state&0x02) + strcpy(cp,GPIO_INIT_NOBUTTON); + else + strcpy(cp,GPIO_INIT_BUTTON); + cmd_line[CL_SIZE-1] = '\0'; + + strcpy(arcs_cmdline,cmd_line); +} + diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig new file mode 100644 index 0000000000..47569c0a25 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/prom.c.orig @@ -0,0 +1,161 @@ +/* +* prom.c +********************************************************************** +* P . Sadik Oct 10, 2003 +* +* Started change log +* idt_cpu_freq is make a kernel configuration parameter +* idt_cpu_freq is exported so that other modules can use it. +* Code cleanup +********************************************************************** +* P. Sadik Oct 20, 2003 +* +* Removed NVRAM code from here, since they are already available under +* nvram directory. +* Added serial port initialisation. +********************************************************************** +********************************************************************** +* P. Sadik Oct 30, 2003 +* +* Added reset_cons_port +********************************************************************** + + P.Christeas, 2005-2006 + Port to 2.6, add 2.6 cmdline parsing + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PROM_ENTRY(x) (0xbfc00000+((x)*8)) +extern void __init setup_serial_port(void); + +unsigned int idt_cpu_freq = 132000000; +EXPORT_SYMBOL(idt_cpu_freq); +unsigned int board_type = 500; +EXPORT_SYMBOL(board_type); +unsigned int gpio_bootup_state = 0; +EXPORT_SYMBOL(gpio_bootup_state); + + +char mips_mac_address[18] = "08:00:06:05:40:01"; +EXPORT_SYMBOL(mips_mac_address); + +/* what to append to cmdline when button is [not] pressed */ +#define GPIO_INIT_NOBUTTON "" +#define GPIO_INIT_BUTTON " 2" + +#ifdef CONFIG_MIKROTIK_RB500 +unsigned soft_reboot = 0; +EXPORT_SYMBOL(soft_reboot); +#endif + +#define SR_NMI 0x00180000 /* NMI */ +#define SERIAL_SPEED_ENTRY 0x00000001 + +#ifdef CONFIG_REMOTE_DEBUG +extern int remote_debug; +#endif + +extern unsigned long mips_machgroup; +extern unsigned long mips_machtype; + +#define FREQ_TAG "HZ=" +#define GPIO_TAG "gpio=" +#define KMAC_TAG "kmac=" +#define MEM_TAG "mem=" +#define BOARD_TAG "board=" +#define IGNORE_CMDLINE_MEM 1 +#define DEBUG_DDR + +void parse_soft_settings(unsigned *ptr, unsigned size); +void parse_hard_settings(unsigned *ptr, unsigned size); + +void __init prom_setup_cmdline(void); + +void __init prom_init(void) +{ + DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */ + phys_t memsize = 0-ddr->ddrmask; + + /* this should be the very first message, even before serial is properly initialized */ + prom_setup_cmdline(); + setup_serial_port(); + + mips_machgroup = MACH_GROUP_MIKROTIK; + soft_reboot = read_c0_status() & SR_NMI; + pm_power_off = NULL; + + /* + * give all RAM to boot allocator, + * except for the first 0x400 and the last 0x200 bytes + */ + add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM); +} + +void prom_free_prom_memory(void) +{ + /* FIXME: STUB */ +} + +void __init prom_setup_cmdline(void){ + char cmd_line[CL_SIZE]; + char *cp; + int prom_argc; + char **prom_argv, **prom_envp; + int i; + + prom_argc = fw_arg0; + prom_argv = (char **) fw_arg1; + prom_envp = (char **) fw_arg2; + + cp=cmd_line; + /* Note: it is common that parameters start at argv[1] and not argv[0], + however, our elf loader starts at [0] */ + for(i=0;i0) *(cp++) = ' '; + if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) { + board_type = simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10); + } + if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) { + gpio_bootup_state = simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10); + } + strcpy(cp,prom_argv[i]); + cp+=strlen(prom_argv[i]); + } + + i=strlen(arcs_cmdline); + if (i>0){ + *(cp++) = ' '; + strcpy(cp,arcs_cmdline); + cp+=strlen(arcs_cmdline); + } + if (gpio_bootup_state&0x02) + strcpy(cp,GPIO_INIT_NOBUTTON); + else + strcpy(cp,GPIO_INIT_BUTTON); + cmd_line[CL_SIZE-1] = '\0'; + + strcpy(arcs_cmdline,cmd_line); +} + diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/serial.c b/target/linux/rb532-2.6/files/arch/mips/rb500/serial.c new file mode 100644 index 0000000000..49c5252feb --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/serial.c @@ -0,0 +1,77 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * Serial port initialisation. + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2004 rkt, neb + * + * Initial Release + * + * + * + ************************************************************************** + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +extern unsigned int idt_cpu_freq; + +static struct uart_port serial_req = { + .type = PORT_16550A, + .line = 0, + .irq = RC32434_UART0_IRQ, + .flags = STD_COM_FLAGS, + .iotype = UPIO_MEM, + .membase = (char *) KSEG1ADDR(RC32434_UART0_BASE), +// .fifosize = 14 + .regshift = 2 +}; + +int __init setup_serial_port(void) +{ + serial_req.uartclk = idt_cpu_freq; + + if (early_serial_setup(&serial_req)) + return -ENODEV; + + return(0); +} diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/setup.c b/target/linux/rb532-2.6/files/arch/mips/rb500/setup.c new file mode 100644 index 0000000000..ee6bfb7235 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/setup.c @@ -0,0 +1,81 @@ +/* + * setup.c - boot time setup code + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for KSEG1ADDR() */ +#include +#include +#include +#include + +#ifdef CONFIG_PCI +extern void *rc32434_time_init(void); +extern int __init rc32434_pcibridge_init(void); +#endif + +#define epldMask ((volatile unsigned char *)0xB900000d) + +static void rb_machine_restart(char *command) +{ + /* just jump to the reset vector */ + * (volatile unsigned *) KSEG1ADDR(0x18008000) = 0x80000001; + ((void (*)(void))KSEG1ADDR(0x1FC00000u))(); +} + +static void rb_machine_halt(void) +{ + for(;;) continue; +} + +#ifdef CONFIG_CPU_HAS_WB +void (*__wbflush) (void); + +static void rb_write_buffer_flush(void) +{ + __asm__ __volatile__ + ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t"); +} +#endif + +void __init plat_mem_setup(void) +{ + unsigned int pciCntlVal; + + board_time_init = rc32434_time_init; + +#ifdef CONFIG_CPU_HAS_WB + __wbflush = rb_write_buffer_flush; +#endif + _machine_restart = rb_machine_restart; + _machine_halt = rb_machine_halt; + /*_machine_power_off = rb_machine_power_halt;*/ + pm_power_off = rb_machine_halt; + + set_io_port_base(KSEG1); + + pciCntlVal=rc32434_pci->pcic; + pciCntlVal &= 0xFFFFFF7; + rc32434_pci->pcic = pciCntlVal; + +#ifdef CONFIG_PCI + /* Enable PCI interrupts in EPLD Mask register */ + *epldMask = 0x0; + *(epldMask + 1) = 0x0; +#endif + write_c0_wired(0); +} + +const char *get_system_type(void) +{ + return "MIPS RB500"; +} diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/time.c b/target/linux/rb532-2.6/files/arch/mips/rb500/time.c new file mode 100644 index 0000000000..3490c94dc9 --- /dev/null +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/time.c @@ -0,0 +1,93 @@ +/* +**************************************************************************** +* Carsten Langgaard, carstenl@mips.com +* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. +* +*************************************************************************** +* +* This program is free software; you can distribute it and/or modify it +* under the terms of the GNU General Public License (Version 2) as +* published by the Free Software Foundation. +* +* This program is distributed in the hope it will be useful, but WITHOUT +* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +* for more details. +* +* You should have received a copy of the GNU General Public License along +* with this program; if not, write to the Free Software Foundation, Inc., +* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. +* +**************************************************************************** +* +* Setting up the clock on the MIPS boards. +* +**************************************************************************** +* P. Sadik Oct 10, 2003 +* +* Started change log. +* mips_counter_frequency is now calculated at run time, based on idt_cpu_freq. +* Code cleanup +**************************************************************************** +*/ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +static unsigned long r4k_offset; /* Amount to incr compare reg each time */ +static unsigned long r4k_cur; /* What counter should be at next timer irq */ +extern unsigned int mips_hpt_frequency; +extern unsigned int idt_cpu_freq; + +/* + * Figure out the r4k offset, the amount to increment the compare + * register for each time tick. There is no RTC available. + * + * The RC32434 counts at half the CPU *core* speed. + */ +static unsigned long __init cal_r4koff(void) +{ + mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2; + return (mips_hpt_frequency / HZ); +} + + +void __init rc32434_time_init(void) +{ + unsigned int est_freq, flags; + + local_irq_save(flags); + + printk("calculating r4koff... "); + r4k_offset = cal_r4koff(); + printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); + + est_freq = 2*r4k_offset*HZ; + est_freq += 5000; /* round */ + est_freq -= est_freq%10000; + printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, + (est_freq%1000000)*100/1000000); + local_irq_restore(flags); +} + +void __init plat_timer_setup(struct irqaction *irq) +{ + /* we are using the cpu counter for timer interrupts */ + setup_irq(MIPS_CPU_TIMER_IRQ, irq); + + /* to generate the first timer interrupt */ + r4k_cur = (read_c0_count() + r4k_offset); + write_c0_compare(r4k_cur); +} + diff --git a/target/linux/rb532-2.6/files/drivers/block/rb500/Makefile b/target/linux/rb532-2.6/files/drivers/block/rb500/Makefile new file mode 100644 index 0000000000..3e14dc35bd --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/block/rb500/Makefile @@ -0,0 +1,3 @@ +## Makefile for the RB532 CF port + +obj-y += bdev.o ata.o diff --git a/target/linux/rb532-2.6/files/drivers/block/rb500/ata.c b/target/linux/rb532-2.6/files/drivers/block/rb500/ata.c new file mode 100644 index 0000000000..fc5f97b6c8 --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/block/rb500/ata.c @@ -0,0 +1,485 @@ +/* CF-mips driver + This is a block driver for the direct (mmaped) interface to the CF-slot, + found in Routerboard.com's RB532 board + See SDK provided from routerboard.com. + + Module adapted By P.Christeas , 2005-6. + Cleaned up and adapted to platform_device by Felix Fietkau + + This work is redistributed under the terms of the GNU General Public License. +*/ + +#include /* printk() */ +#include /* module to be loadable */ +#include +#include +#include +#include /* request_mem_region() */ +#include /* ioremap() */ +#include /* ioremap() */ +#include + +#include "ata.h" + +#define REQUEST_MEM_REGION 0 +#define DEBUG 1 + +#if DEBUG +#define DEBUGP printk +#else +#define DEBUGP(format, args...) +#endif + +#define SECS 1000000 /* unit for wait_not_busy() is 1us */ + +unsigned cf_head = 0; +unsigned cf_cyl = 0; +unsigned cf_spt = 0; +unsigned cf_sectors = 0; +static unsigned cf_block_size = 1; +static void *baddr = 0; + +#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET)) + + +static void cf_do_tasklet(unsigned long dev_l); + + +static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev) +{ + writeb(val, dev->baddr + ATA_REG_OFFSET + reg); +} + +static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev) +{ + return readb(dev->baddr + ATA_REG_OFFSET + reg); +} + +static inline int get_gpio_bit(gpio_func ofs, struct cf_mips_dev *dev) +{ + return (gpio_get(ofs) >> dev->pin) & 1; +} + +static inline void set_gpio_bit(int bit, gpio_func ofs, struct cf_mips_dev *dev) +{ + gpio_set(ofs, (1 << dev->pin), ((bit & 1) << dev->pin)); +} + +static inline int cfrdy(struct cf_mips_dev *dev) +{ + return get_gpio_bit(DATA, dev); +} + +static inline void prepare_cf_irq(struct cf_mips_dev *dev) +{ + set_gpio_bit(1, ILEVEL, dev); /* interrupt on cf ready (not busy) */ + set_gpio_bit(0, ISTAT, dev); /* clear interrupt status */ +} + +static inline int cf_present(struct cf_mips_dev* dev) +{ + /* TODO: read and configure CIS into memory mapped mode + * TODO: parse CISTPL_CONFIG on CF+ cards to get base address (0x200) + * TODO: maybe adjust power saving setting for Hitachi Microdrive + */ + int i; + + /* setup CFRDY GPIO as input */ + set_gpio_bit(0, FUNC, dev); + set_gpio_bit(0, CFG, dev); + + for (i = 0; i < 0x10; ++i) { + if (rareg(i,dev) != 0xff) + return 1; + } + return 0; +} + +static inline int is_busy(struct cf_mips_dev *dev) +{ + return !cfrdy(dev); +} + +static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev) +{ + int us_passed = 0; + if (wait_for_busy && !is_busy(dev)) { + /* busy must appear within 400ns, + * but it may dissapear before we see it + * => must not wait for busy in a loop + */ + ndelay(400); + } + + do { + if (us_passed) + udelay(1); /* never reached in async mode */ + if (!is_busy(dev)) { + if (us_passed > 1 * SECS) { + printk(KERN_WARNING "cf-mips: not busy ok (after %dus)" + ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev)); + } + return CF_TRANS_OK; + } + if (us_passed == 1 * SECS) { + printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us); + } + if (dev->async_mode) { + dev->to_timer.expires = jiffies + (to_us * HZ / SECS); + dev->irq_enable_time = jiffies; + prepare_cf_irq(dev); + if (is_busy(dev)) { + add_timer(&dev->to_timer); + enable_irq(dev->irq); + return CF_TRANS_IN_PROGRESS; + } + continue; + } + ++us_passed; + } while (us_passed < to_us); + + printk(KERN_ERR "cf-mips: wait not busy timeout (%dus)" + ", status 0x%02x, state %d\n", + to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate); + return CF_TRANS_FAILED; +} + +static irqreturn_t cf_irq_handler(int irq, void *dev_id) +{ + /* While tasklet has not disabled irq, irq will be retried all the time + * because of ILEVEL matching GPIO pin status => deadlock. + * To avoid this, we change ILEVEL to 0. + */ + struct cf_mips_dev *dev=dev_id; + + set_gpio_bit(0, ILEVEL, dev); + set_gpio_bit(0, ISTAT, dev); + + del_timer(&dev->to_timer); + tasklet_schedule(&dev->tasklet); + return IRQ_HANDLED; +} + +static int do_reset(struct cf_mips_dev *dev) +{ + printk(KERN_INFO "cf-mips: resetting..\n"); + + wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev); + udelay(1); /* FIXME: how long should we wait here? */ + wareg(0, ATA_REG_DC,dev); + + return wait_not_busy(30 * SECS, 1,dev); +} + +static int set_multiple(struct cf_mips_dev *dev) +{ + if (dev->block_size <= 1) + return CF_TRANS_OK; + + wareg(dev->block_size, ATA_REG_SC,dev); + wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev); + wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev); + + return wait_not_busy(10 * SECS, 1,dev); +} + +static int set_cmd(struct cf_mips_dev *dev) +{ + //DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd); + // sector_count should be <=24 bits.. + BUG_ON(dev->tsect_start>=0x10000000); + // This way, it addresses 2^24 * 512 = 128G + + if (dev->tsector_count) { + wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev); + wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev); + wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev); + wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev); + } + wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA, + ATA_REG_DH,dev); /* select drive on all commands */ + wareg(dev->tcmd, ATA_REG_CMD,dev); + return wait_not_busy(10 * SECS, 1,dev); +} + +static int do_trans(struct cf_mips_dev *dev) +{ + int res; + unsigned st; + int transfered; + + //printk("do_trans: %d sectors left\n",dev->tsectors_left); + while (dev->tsectors_left) { + transfered = 0; + + st = rareg(ATA_REG_ST,dev); + if (!(st & ATA_REG_ST_DRQ)) { + printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st); + if (st & ATA_REG_ST_ERR) { + int errId = rareg(ATA_REG_ERR,dev); + printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n", + (dev->tread ? "read" : "write"), st, errId); + } + return CF_TRANS_FAILED; + } + do { /* Fill/read the buffer one block */ + u32 *qbuf, *qend; + qbuf = (u32 *)dev->tbuf; + qend = qbuf + CF_SECT_SIZE / sizeof(u32); + if (dev->tread) { + while (qbuf!=qend) + put_unaligned(*DBUF32,qbuf++); + //*(qbuf++) = *DBUF32; + } + else { + while(qbuf!=qend) + *DBUF32 = get_unaligned(qbuf++); + } + + dev->tsectors_left--; + dev->tbuf += CF_SECT_SIZE; + dev->tbuf_size -= CF_SECT_SIZE; + transfered++; + } while (transfered != dev->block_size && dev->tsectors_left > 0); + + res = wait_not_busy(10 * SECS, 1,dev); + if (res != CF_TRANS_OK) + return res; + }; + + st = rareg(ATA_REG_ST,dev); + if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) { + if (st & ATA_REG_ST_DRQ) { + printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s" + ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st); + } else if (st & ATA_REG_ST_DWF) { + printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st); + } else { + int errId = rareg(ATA_REG_ERR,dev); + printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n", + (dev->tread ? "read" : "write"), st, errId); + } + return CF_TRANS_FAILED; + } + return CF_TRANS_OK; +} + +static int cf_do_state(struct cf_mips_dev *dev) +{ + int res; + switch (dev->tstate) { /* fall through everywhere */ + case TS_IDLE: + dev->tstate = TS_READY; + if (is_busy(dev)) { + dev->tstate = TS_AFTER_RESET; + res = do_reset(dev); + if (res != CF_TRANS_OK) + break; + } + case TS_AFTER_RESET: + if (dev->tstate == TS_AFTER_RESET) { + dev->tstate = TS_READY; + res = set_multiple(dev); + if (res != CF_TRANS_OK) + break; + } + case TS_READY: + dev->tstate = TS_CMD; + res = set_cmd(dev); + if (res != CF_TRANS_OK) + break;; + case TS_CMD: + dev->tstate = TS_TRANS; + case TS_TRANS: + res = do_trans(dev); + break; + default: + printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate); + return CF_TRANS_FAILED; + } + if (res != CF_TRANS_IN_PROGRESS) + dev->tstate = TS_IDLE; + return res; +} + +static void cf_do_tasklet(unsigned long dev_l) +{ + struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l; + int res; + + disable_irq(dev->irq); + + if (dev->tstate == TS_IDLE) + return; /* can happen when irq is first registered */ + +#if 0 + DEBUGP(KERN_WARNING "cf-mips: not busy ok (tasklet) status 0x%02x\n", + (unsigned) rareg(ATA_REG_ST,dev)); +#endif + + res = cf_do_state(dev); + if (res == CF_TRANS_IN_PROGRESS) + return; + cf_async_trans_done(dev,res); +} + +static void cf_async_timeout(unsigned long dev_l) +{ + struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l; + disable_irq(dev->irq); + /* Perhaps send abort to the device? */ + printk(KERN_ERR "cf-mips: wait not busy timeout (%lus)" + ", status 0x%02x, state %d\n", + jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate); + dev->tstate = TS_IDLE; + cf_async_trans_done(dev,CF_TRANS_FAILED); +} + +int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, + char* buffer, int is_write) +{ + BUG_ON(dev->tstate!=TS_IDLE); + if (nsect > ATA_MAX_SECT_PER_CMD) { + printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect); + return CF_TRANS_FAILED; + } + if (sector + nsect > dev->sectors) { + printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector); + return CF_TRANS_FAILED; + } + dev->tbuf = buffer; + dev->tbuf_size = nsect*512; + dev->tsect_start = sector; + dev->tsector_count = nsect; + dev->tsectors_left = dev->tsector_count; + dev->tread = (is_write)?0:1; + + dev->tcmd = (dev->block_size == 1 ? + (is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) : + (is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE)); + + return cf_do_state(dev); +} + +static int do_identify(struct cf_mips_dev *dev) +{ + u16 sbuf[CF_SECT_SIZE >> 1]; + int res; + char tstr[17]; //serial + BUG_ON(dev->tstate!=TS_IDLE); + dev->tbuf = (char *) sbuf; + dev->tbuf_size = CF_SECT_SIZE; + dev->tsect_start = 0; + dev->tsector_count = 0; + dev->tsectors_left = 1; + dev->tread = 1; + dev->tcmd = ATA_CMD_IDENTIFY_DRIVE; + + DEBUGP(KERN_INFO "cf-mips: identify drive..\n"); + res = cf_do_state(dev); + if (res == CF_TRANS_IN_PROGRESS) { + printk(KERN_ERR "cf-mips: BUG: async identify cmd\n"); + return CF_TRANS_FAILED; + } + if (res != CF_TRANS_OK) + return 0; + + dev->head = sbuf[3]; + dev->cyl = sbuf[1]; + dev->spt = sbuf[6]; + dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8]; + dev->dtype=sbuf[0]; + memcpy(tstr,&sbuf[12],16); + tstr[16]=0; + printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n", + (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head, + dev->spt, dev->sectors, dev->sectors >> 11,tstr); + return 1; +} + +static void init_multiple(struct cf_mips_dev * dev) +{ + int res; + DEBUGP(KERN_INFO "cf-mips: detecting block size\n"); + + dev->block_size = 128; /* max block size = 128 sectors (64KB) */ + do { + wareg(dev->block_size, ATA_REG_SC,dev); + wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev); + wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev); + + res = wait_not_busy(10 * SECS, 1,dev); + if (res != CF_TRANS_OK) { + printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n"); + dev->block_size = 1; + return; + } + if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0) + break; + dev->block_size /= 2; + } while (dev->block_size > 1); + + printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size); +} + +int cf_init(struct cf_mips_dev *dev) +{ + tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev); + dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE); + if (!dev->baddr) { + printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n", + (unsigned long) dev->base, CFDEV_BUF_SIZE); + return -EBUSY; + } + + if (!cf_present(dev)) { + printk(KERN_WARNING "cf-mips: cf card not present\n"); + iounmap(dev->baddr); + return -ENODEV; + } + + if (do_reset(dev) != CF_TRANS_OK) { + printk(KERN_ERR "cf-mips: cf reset failed\n"); + iounmap(dev->baddr); + return -EBUSY; + } + + if (!do_identify(dev)) { + printk(KERN_ERR "cf-mips: cf identify failed\n"); + iounmap(dev->baddr); + return -EBUSY; + } + +/* set_apm_level(ATA_APM_WITH_STANDBY); */ + init_multiple(dev); + + init_timer(&dev->to_timer); + dev->to_timer.function = cf_async_timeout; + dev->to_timer.data = (unsigned long)dev; + + prepare_cf_irq(dev); + if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) { + printk(KERN_ERR "cf-mips: failed to get irq\n"); + iounmap(dev->baddr); + return -EBUSY; + } + /* Disable below would be odd, because request will enable, and the tasklet + will disable it itself */ + //disable_irq(dev->irq); + + dev->async_mode = 1; + + return 0; +} + +void cf_cleanup(struct cf_mips_dev *dev) +{ + iounmap(dev->baddr); + free_irq(dev->irq, NULL); +#if REQUEST_MEM_REGION + release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE); +#endif +} + + +/*eof*/ diff --git a/target/linux/rb532-2.6/files/drivers/block/rb500/ata.h b/target/linux/rb532-2.6/files/drivers/block/rb500/ata.h new file mode 100644 index 0000000000..15e8826308 --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/block/rb500/ata.h @@ -0,0 +1,143 @@ +/* CF-mips driver + This is a block driver for the direct (mmaped) interface to the CF-slot, + found in Routerboard.com's RB532 board + See SDK provided from routerboard.com. + + Module adapted By P.Christeas , 2005-6. + Cleaned up and adapted to platform_device by Felix Fietkau + + This work is redistributed under the terms of the GNU General Public License. +*/ + +#ifndef __CFMIPS_ATA_H__ +#define __CFMIPS_ATA_H__ + +#include + +#define CFG_DC_DEV1 (void*)0xb8010010 +#define CFG_DC_DEVBASE 0x0 +#define CFG_DC_DEVMASK 0x4 +#define CFG_DC_DEVC 0x8 +#define CFG_DC_DEVTC 0xC + +#define CFDEV_BUF_SIZE 0x1000 +#define ATA_CIS_OFFSET 0x200 +#define ATA_REG_OFFSET 0x800 +#define ATA_DBUF_OFFSET 0xC00 + +#define ATA_REG_FEAT 0x1 +#define ATA_REG_SC 0x2 +#define ATA_REG_SN 0x3 +#define ATA_REG_CL 0x4 +#define ATA_REG_CH 0x5 +#define ATA_REG_DH 0x6 +#define ATA_REG_DH_BASE 0xa0 +#define ATA_REG_DH_LBA 0x40 +#define ATA_REG_DH_DRV 0x10 +#define ATA_REG_CMD 0x7 +#define ATA_REG_ST 0x7 +#define ATA_REG_ST_BUSY 0x80 +#define ATA_REG_ST_RDY 0x40 +#define ATA_REG_ST_DWF 0x20 +#define ATA_REG_ST_DSC 0x10 +#define ATA_REG_ST_DRQ 0x08 +#define ATA_REG_ST_CORR 0x04 +#define ATA_REG_ST_ERR 0x01 +#define ATA_REG_ERR 0xd +#define ATA_REG_DC 0xe +#define ATA_REG_DC_IEN 0x02 +#define ATA_REG_DC_SRST 0x04 + +#define ATA_CMD_READ_SECTORS 0x20 +#define ATA_CMD_WRITE_SECTORS 0x30 +#define ATA_CMD_EXEC_DRIVE_DIAG 0x90 +#define ATA_CMD_READ_MULTIPLE 0xC4 +#define ATA_CMD_WRITE_MULTIPLE 0xC5 +#define ATA_CMD_SET_MULTIPLE 0xC6 +#define ATA_CMD_IDENTIFY_DRIVE 0xEC +#define ATA_CMD_SET_FEATURES 0xEF + +#define ATA_FEATURE_ENABLE_APM 0x05 +#define ATA_FEATURE_DISABLE_APM 0x85 +#define ATA_APM_DISABLED 0x00 +#define ATA_APM_MIN_POWER 0x01 +#define ATA_APM_WITH_STANDBY 0x7f +#define ATA_APM_WITHOUT_STANDBY 0x80 +#define ATA_APM_MAX_PERFORMANCE 0xfe + +#define CF_SECT_SIZE 0x200 +/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */ +#define CF_KERNEL_MUL 1 +#define ATA_MAX_SECT_PER_CMD 0x100 + +#define CF_TRANS_FAILED 0 +#define CF_TRANS_OK 1 +#define CF_TRANS_IN_PROGRESS 2 + + +enum trans_state { + TS_IDLE = 0, + TS_AFTER_RESET, + TS_READY, + TS_CMD, + TS_TRANS +}; + +// +// #if DEBUG +// static unsigned long busy_time; +// #endif + +/** Struct to hold the cfdev +Actually, all the data here only has one instance. However, for +reasons of programming conformity, it is passed around as a pointer +*/ +struct cf_mips_dev { + void *base; /* base address for I/O */ + void *baddr; /* remapped address */ + + int pin; /* gpio pin */ + int irq; /* gpio irq */ + + unsigned head; + unsigned cyl; + unsigned spt; + unsigned sectors; + + unsigned short block_size; + unsigned dtype ; // ATA or CF + struct request_queue *queue; + struct gendisk *gd; + + /* Transaction state */ + enum trans_state tstate; + char *tbuf; + unsigned long tbuf_size; + sector_t tsect_start; + unsigned tsector_count; + unsigned tsectors_left; + int tread; + unsigned tcmd; + int async_mode; + unsigned long irq_enable_time; + + struct request *active_req; /* A request is being carried out. Is that different from tstate? */ + int users; + struct timer_list to_timer; + struct tasklet_struct tasklet; + + /** This lock ensures that the requests to this device are all done + atomically. Transfers can run in parallel, requests are all queued + one-by-one */ + spinlock_t lock; +}; + +int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, + char* buffer, int is_write); +int cf_init(struct cf_mips_dev* dev); +void cf_cleanup(struct cf_mips_dev* dev); + +void cf_async_trans_done(struct cf_mips_dev* dev, int result); +// void *cf_get_next_buf(unsigned long *buf_size); + +#endif diff --git a/target/linux/rb532-2.6/files/drivers/block/rb500/bdev.c b/target/linux/rb532-2.6/files/drivers/block/rb500/bdev.c new file mode 100644 index 0000000000..e4532739b9 --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/block/rb500/bdev.c @@ -0,0 +1,339 @@ +/* CF-mips driver + This is a block driver for the direct (mmaped) interface to the CF-slot, + found in Routerboard.com's RB532 board + See SDK provided from routerboard.com. + + Module adapted By P.Christeas , 2005-6. + Cleaned up and adapted to platform_device by Felix Fietkau + + This work is redistributed under the terms of the GNU General Public License. +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#ifdef DEBUG +#define DEBUGP printk +#define DLEVEL 1 +#else +#define DEBUGP(format, args...) +#define DLEVEL 0 +#endif + +#define CF_MIPS_MAJOR 13 +#define MAJOR_NR CF_MIPS_MAJOR +#define CF_MAX_PART 16 /* max 15 partitions */ + +#include "ata.h" + +//extern struct block_device_operations cf_bdops; + +// static struct hd_struct cf_parts[CF_MAX_PART]; +// static int cf_part_sizes[CF_MAX_PART]; +// static int cf_hsect_sizes[CF_MAX_PART]; +// static int cf_max_sectors[CF_MAX_PART]; +// static int cf_blksize_sizes[CF_MAX_PART]; + +// static spinlock_t lock = SPIN_LOCK_UNLOCKED; + +// volatile int cf_busy = 0; + +static struct request *active_req = NULL; + +static int cf_open (struct inode *, struct file *); +static int cf_release (struct inode *, struct file *); +static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long); + +static void cf_request(request_queue_t * q); +static int cf_transfer(const struct request *req); + +/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long); +long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/ +// int (*direct_access) (struct block_device *, sector_t, unsigned long *); +// int (*media_changed) (struct gendisk *); +// int (*revalidate_disk) (struct gendisk *); + +static struct block_device_operations cf_bdops = { + .owner = THIS_MODULE, + .open = cf_open, + .release = cf_release, + .ioctl = cf_ioctl, + .media_changed = NULL, + .unlocked_ioctl = NULL, + .revalidate_disk = NULL, + .compat_ioctl = NULL, + .direct_access = NULL +}; + + +int cf_mips_probe(struct platform_device *pdev) +{ + struct gendisk* cf_gendisk=NULL; + struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data; + struct cf_mips_dev *dev; + struct resource *r; + int reg_result; + + reg_result = register_blkdev(MAJOR_NR, "cf-mips"); + if (reg_result < 0) { + printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR); + return reg_result; + } + + dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL); + if (!dev) + goto out_err; + memset(dev, 0, sizeof(struct cf_mips_dev)); + cdev->dev = dev; + + dev->pin = cdev->gpio_pin; + dev->irq = platform_get_irq_byname(pdev, "cf_irq"); + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase"); + dev->base = (void *) r->start; + + if (cf_init(dev)) goto out_err; + printk("init done"); + + spin_lock_init(&dev->lock); + dev->queue = blk_init_queue(cf_request,&dev->lock); + if (!dev->queue){ + printk(KERN_ERR "cf-mips: no mem for queue\n"); + goto out_err; + } + blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD); + + /* For memory devices, it is always better to avoid crossing segments + inside the same request. */ +/* if (dev->dtype==0x848A){ + printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1); + blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1); + }*/ + + dev->gd = alloc_disk(CF_MAX_PART); + cf_gendisk = dev->gd; + cdev->gd = dev->gd; + if (!cf_gendisk) goto out_err; /* Last of these goto's */ + + cf_gendisk->major = MAJOR_NR; + cf_gendisk->first_minor = 0; + cf_gendisk->queue=dev->queue; + BUG_ON(cf_gendisk->minors != CF_MAX_PART); + strcpy(cf_gendisk->disk_name,"cfa"); + cf_gendisk->fops = &cf_bdops; + cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */ + cf_gendisk->private_data=dev; + + set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL); + + /* Let the disk go live */ + add_disk(cf_gendisk); +#if 0 + result = cf_init(); + + /* default cfg for all partitions */ + memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART); + memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART); + for (i = 0; i < CF_MAX_PART; ++i) { + cf_hsect_sizes[i] = CF_SECT_SIZE; + cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD; + cf_blksize_sizes[i] = BLOCK_SIZE; + } + + /* setup info for whole disk (partition 0) */ + cf_part_sizes[0] = cf_sectors / 2; + cf_parts[0].nr_sects = cf_sectors; + + blk_size[MAJOR_NR] = cf_part_sizes; + blksize_size[MAJOR_NR] = cf_blksize_sizes; + max_sectors[MAJOR_NR] = cf_max_sectors; + hardsect_size[MAJOR_NR] = cf_hsect_sizes; + read_ahead[MAJOR_NR] = 8; /* (4kB) */ + + blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST); + + add_gendisk(&cf_gendisk); +#endif +// printk(KERN_INFO "cf-mips partition check: \n"); +// register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART, +// &cf_bdops, dev->sectors); + return 0; + +out_err: + if (dev->queue){ + blk_cleanup_queue(dev->queue); + } + if (reg_result) { + unregister_blkdev(MAJOR_NR, "cf-mips"); + return reg_result; + } + if (dev){ + cf_cleanup(dev); + kfree(dev); + } + return 1; +} + +static int +cf_mips_remove(struct platform_device *pdev) +{ + struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data; + struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev; + + unregister_blkdev(MAJOR_NR, "cf-mips"); + blk_cleanup_queue(dev->queue); + + del_gendisk(dev->gd); + cf_cleanup(dev); + return 0; +} + + +static struct platform_driver cf_driver = { + .driver.name = "rb500-cf", + .probe = cf_mips_probe, + .remove = cf_mips_remove, +}; + +static int __init cf_mips_init(void) +{ + printk(KERN_INFO "cf-mips module loaded\n"); + return platform_driver_register(&cf_driver); +} + +static void cf_mips_cleanup(void) +{ + platform_driver_unregister(&cf_driver); + printk(KERN_INFO "cf-mips module removed\n"); +} + +module_init(cf_mips_init); +module_exit(cf_mips_cleanup); + +MODULE_LICENSE("GPL"); +MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR); + + +static int cf_open(struct inode *inode, struct file *filp) +{ + struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; + int minor = MINOR(inode->i_rdev); + + if (minor >= CF_MAX_PART) + return -ENODEV; + //DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor); + spin_lock(&dev->lock); + dev->users++; + spin_unlock(&dev->lock); + filp->private_data=dev; + + /* dirty workaround to set CFRDY GPIO as an input when some other + program sets it as an output */ + gpio_set(CFG, (1 << dev->pin), 0); + return 0; /* success */ +} + +static int cf_release(struct inode *inode, struct file *filp) +{ + int minor = MINOR(inode->i_rdev); + struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; + spin_lock(&dev->lock); + dev->users--; + spin_unlock(&dev->lock); + return 0; +} + +static int cf_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + unsigned minor = MINOR(inode->i_rdev); + struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; + + DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd); + switch (cmd) { + case BLKRRPART: /* re-read partition table */ + if (!capable(CAP_SYS_ADMIN)) + return -EACCES; + printk(KERN_INFO "cf-mips partition check: \n"); + register_disk(dev->gd); + return 0; + + case HDIO_GETGEO: + { + struct hd_geometry geo; + geo.cylinders = dev->cyl; + geo.heads = dev->head; + geo.sectors = dev->spt; + geo.start = (*dev->gd->part)[minor].start_sect; + if (copy_to_user((void *) arg, &geo, sizeof (geo))) + return -EFAULT; + } + return 0; + } + + return -EINVAL; /* unknown command */ +} + +static void cf_request(request_queue_t * q) +{ + struct cf_mips_dev* dev; + + struct request * req; + int status; + + /* We could have q->queuedata = dev , but haven't yet. */ + if (active_req) + return; + + while ((req=elv_next_request(q))!=NULL){ + dev=req->rq_disk->private_data; + status=cf_transfer(req); + if (status==CF_TRANS_IN_PROGRESS){ + active_req=req; + return; + } + end_request(req,status); + } +} + +static int cf_transfer(const struct request *req) +{ + struct cf_mips_dev* dev=req->rq_disk->private_data; + + if (!blk_fs_request(req)){ + if (printk_ratelimit()) + printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]); + return CF_TRANS_FAILED; + } + + return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req)); +} + +void cf_async_trans_done(struct cf_mips_dev * dev,int result) +{ + struct request *req; + + spin_lock(&dev->lock); + req=active_req; + active_req=NULL; + end_request(req,result); + spin_unlock(&dev->lock); + + spin_lock(&dev->lock); + cf_request(dev->queue); + spin_unlock(&dev->lock); +} + diff --git a/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c new file mode 100644 index 0000000000..1ab37b8208 --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c @@ -0,0 +1,137 @@ +#include +#include +#include +#include +#include +#include +#include +#include + +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000)) + +#define GPIOF 0x050000 +#define GPIOC 0x050004 +#define GPIOD 0x050008 + +#define GPIO_RDY (1 << 0x08) +#define GPIO_WPX (1 << 0x09) +#define GPIO_ALE (1 << 0x0a) +#define GPIO_CLE (1 << 0x0b) + +#define DEV2BASE 0x010020 + +#define LO_WPX (1 << 0) +#define LO_ALE (1 << 1) +#define LO_CLE (1 << 2) +#define LO_CEX (1 << 3) +#define LO_FOFF (1 << 5) +#define LO_SPICS (1 << 6) +#define LO_ULED (1 << 7) + +#define MEM32(x) *((volatile unsigned *) (x)) +static void __iomem *p_nand; + +extern void changeLatchU5(unsigned char orMask, unsigned char nandMask); + +static int rb500_dev_ready(struct mtd_info *mtd) +{ + return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY; +} + +/* + * hardware specific access to control-lines + * + * ctrl: + * NAND_CLE: bit 2 -> bit 3 + * NAND_ALE: bit 3 -> bit 2 + */ +static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *chip = mtd->priv; + unsigned char orbits, nandbits; + + if (ctrl & NAND_CTRL_CHANGE) { + + orbits = (ctrl & NAND_CLE) << 1; + orbits |= (ctrl & NAND_ALE) >> 1; + + nandbits = (~ctrl & NAND_CLE) << 1; + nandbits |= (~ctrl & NAND_ALE) >> 1; + + changeLatchU5(orbits, nandbits); + } + if (cmd != NAND_CMD_NONE) + writeb(cmd, chip->IO_ADDR_W); + +} + +static struct mtd_partition partition_info[] = { + { + name:"RouterBoard NAND Boot", + offset:0, + size:4 * 1024 * 1024}, + { + name:"RouterBoard NAND Main", + offset:MTDPART_OFS_NXTBLK, + size:MTDPART_SIZ_FULL} +}; + +static struct mtd_info rmtd; +static struct nand_chip rnand; + +static unsigned init_ok = 0; + +unsigned get_rbnand_block_size(void) +{ + if (init_ok) + return rmtd.writesize; + else + return 0; +} + +EXPORT_SYMBOL(get_rbnand_block_size); + +int __init rbmips_init(void) +{ + int *b; + memset(&rmtd, 0, sizeof(rmtd)); + memset(&rnand, 0, sizeof(rnand)); + + printk("RB500 nand\n"); + changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, + LO_ULED | LO_ALE | LO_CLE); + rnand.cmd_ctrl = rbmips_hwcontrol500; + + rnand.dev_ready = rb500_dev_ready; + rnand.IO_ADDR_W = (unsigned char *) + KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE)); + rnand.IO_ADDR_R = rnand.IO_ADDR_W; + + p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000); + if (!p_nand) { + printk("RBnand Unable ioremap buffer"); + return -ENXIO; + } + rnand.ecc.mode = NAND_ECC_SOFT; + rnand.chip_delay = 25; + rnand.options |= NAND_NO_AUTOINCR; + rmtd.priv = &rnand; + + b = (int *) KSEG1ADDR(0x18010020); + printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0], + b[1], b[2], b[3]); + + if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) + && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) { + printk("RBxxx nand device not found\n"); + iounmap((void *) p_nand); + return -ENXIO; + } + + add_mtd_partitions(&rmtd, partition_info, 2); + init_ok = 1; + return 0; +} + +module_init(rbmips_init); diff --git a/target/linux/rb532-2.6/files/drivers/net/korina.c b/target/linux/rb532-2.6/files/drivers/net/korina.c new file mode 100644 index 0000000000..3a22339b41 --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/net/korina.c @@ -0,0 +1,1160 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * Driver for the IDT RC32434 on-chip ethernet controller. + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * Copyright 2006 Felix Fietkau + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2004 rkt, neb + * + * Based on the driver developed by B. Maruthanayakam, H. Kou and others. + * + * Aug 2004 Sadik + * + * Added NAPI + * + ************************************************************************** + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "rc32434_eth.h" + +#define DRIVER_VERSION "(mar2904)" + +#define DRIVER_NAME "rc32434 Ethernet driver. " DRIVER_VERSION + +#define STATION_ADDRESS_HIGH(dev) (((dev)->dev_addr[0] << 8) | \ + ((dev)->dev_addr[1])) +#define STATION_ADDRESS_LOW(dev) (((dev)->dev_addr[2] << 24) | \ + ((dev)->dev_addr[3] << 16) | \ + ((dev)->dev_addr[4] << 8) | \ + ((dev)->dev_addr[5])) + +#define MII_CLOCK 1250000 /* no more than 2.5MHz */ +#define CONFIG_IDT_USE_NAPI 1 + + +static inline void rc32434_abort_tx(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + rc32434_abort_dma(dev, lp->tx_dma_regs); + +} + +static inline void rc32434_abort_rx(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + rc32434_abort_dma(dev, lp->rx_dma_regs); + +} + +static inline void rc32434_start_tx(struct rc32434_local *lp, volatile DMAD_t td) +{ + rc32434_start_dma(lp->tx_dma_regs, CPHYSADDR(td)); +} + +static inline void rc32434_start_rx(struct rc32434_local *lp, volatile DMAD_t rd) +{ + rc32434_start_dma(lp->rx_dma_regs, CPHYSADDR(rd)); +} + +static inline void rc32434_chain_tx(struct rc32434_local *lp, volatile DMAD_t td) +{ + rc32434_chain_dma(lp->tx_dma_regs, CPHYSADDR(td)); +} + +static inline void rc32434_chain_rx(struct rc32434_local *lp, volatile DMAD_t rd) +{ + rc32434_chain_dma(lp->rx_dma_regs, CPHYSADDR(rd)); +} + +#ifdef RC32434_PROC_DEBUG +static int rc32434_read_proc(char *buf, char **start, off_t fpos, + int length, int *eof, void *data) +{ + struct net_device *dev = (struct net_device *)data; + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + int len = 0; + + /* print out header */ + len += sprintf(buf + len, "\n\tKorina Ethernet Debug\n\n"); + len += sprintf (buf + len, + "DMA halt count = %10d, DMA run count = %10d\n", + lp->dma_halt_cnt, lp->dma_run_cnt); + + if (fpos >= len) { + *start = buf; + *eof = 1; + return 0; + } + *start = buf + fpos; + + if ((len -= fpos) > length) + return length; + *eof = 1; + + return len; + +} +#endif + + +/* + * Restart the RC32434 ethernet controller. + */ +static int rc32434_restart(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + + /* + * Disable interrupts + */ + disable_irq(lp->rx_irq); + disable_irq(lp->tx_irq); +#ifdef RC32434_REVISION + disable_irq(lp->ovr_irq); +#endif + disable_irq(lp->und_irq); + + /* Mask F E bit in Tx DMA */ + __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) | DMASM_f_m | DMASM_e_m, &lp->tx_dma_regs->dmasm); + /* Mask D H E bit in Rx DMA */ + __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) | DMASM_d_m | DMASM_h_m | DMASM_e_m, &lp->rx_dma_regs->dmasm); + + rc32434_init(dev); + rc32434_multicast_list(dev); + + enable_irq(lp->und_irq); +#ifdef RC32434_REVISION + enable_irq(lp->ovr_irq); +#endif + enable_irq(lp->tx_irq); + enable_irq(lp->rx_irq); + + return 0; +} + +static int rc32434_probe(struct platform_device *pdev) +{ + struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data; + struct rc32434_local *lp = NULL; + struct net_device *dev = NULL; + struct resource *r; + int i, retval,err; + + dev = alloc_etherdev(sizeof(struct rc32434_local)); + if(!dev) { + ERR("Korina_eth: alloc_etherdev failed\n"); + return -1; + } + + platform_set_drvdata(pdev, dev); + SET_MODULE_OWNER(dev); + bif->dev = dev; + + memcpy(dev->dev_addr, bif->mac, 6); + + /* Initialize the device structure. */ + if (dev->priv == NULL) { + lp = (struct rc32434_local *)kmalloc(sizeof(*lp), GFP_KERNEL); + memset(lp, 0, sizeof(struct rc32434_local)); + } + else { + lp = (struct rc32434_local *)dev->priv; + } + + lp->rx_irq = platform_get_irq_byname(pdev, "korina_rx"); + lp->tx_irq = platform_get_irq_byname(pdev, "korina_tx"); + lp->ovr_irq = platform_get_irq_byname(pdev, "korina_ovr"); + lp->und_irq = platform_get_irq_byname(pdev, "korina_und"); + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs"); + dev->base_addr = r->start; + lp->eth_regs = ioremap_nocache(r->start, r->end - r->start); + if (!lp->eth_regs) { + ERR("Can't remap eth registers\n"); + retval = -ENXIO; + goto probe_err_out; + } + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx"); + lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start); + if (!lp->rx_dma_regs) { + ERR("Can't remap Rx DMA registers\n"); + retval = -ENXIO; + goto probe_err_out; + } + + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx"); + lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start); + if (!lp->tx_dma_regs) { + ERR("Can't remap Tx DMA registers\n"); + retval = -ENXIO; + goto probe_err_out; + } + +#ifdef RC32434_PROC_DEBUG + lp->ps = create_proc_read_entry (bif->name, 0, proc_net, + rc32434_read_proc, dev); +#endif + + lp->td_ring = (DMAD_t)kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL); + if (!lp->td_ring) { + ERR("Can't allocate descriptors\n"); + retval = -ENOMEM; + goto probe_err_out; + } + + dma_cache_inv((unsigned long)(lp->td_ring), TD_RING_SIZE + RD_RING_SIZE); + + /* now convert TD_RING pointer to KSEG1 */ + lp->td_ring = (DMAD_t )KSEG1ADDR(lp->td_ring); + lp->rd_ring = &lp->td_ring[RC32434_NUM_TDS]; + + + spin_lock_init(&lp->lock); + + /* just use the rx dma irq */ + dev->irq = lp->rx_irq; + + dev->priv = lp; + + dev->open = rc32434_open; + dev->stop = rc32434_close; + dev->hard_start_xmit = rc32434_send_packet; + dev->get_stats = rc32434_get_stats; + dev->set_multicast_list = &rc32434_multicast_list; + dev->tx_timeout = rc32434_tx_timeout; + dev->watchdog_timeo = RC32434_TX_TIMEOUT; + +#ifdef CONFIG_IDT_USE_NAPI + dev->poll = rc32434_poll; + dev->weight = 64; + printk("Using NAPI with weight %d\n",dev->weight); +#else + lp->rx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL); + tasklet_init(lp->rx_tasklet, rc32434_rx_tasklet, (unsigned long)dev); +#endif + lp->tx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL); + tasklet_init(lp->tx_tasklet, rc32434_tx_tasklet, (unsigned long)dev); + + if ((err = register_netdev(dev))) { + printk(KERN_ERR "rc32434 ethernet. Cannot register net device %d\n", err); + free_netdev(dev); + retval = -EINVAL; + goto probe_err_out; + } + + INFO("Rx IRQ %d, Tx IRQ %d, ", lp->rx_irq, lp->tx_irq); + for (i = 0; i < 6; i++) { + printk("%2.2x", dev->dev_addr[i]); + if (i<5) + printk(":"); + } + printk("\n"); + + return 0; + + probe_err_out: + rc32434_cleanup_module(); + ERR(" failed. Returns %d\n", retval); + return retval; + +} + +static int rc32434_remove(struct platform_device *pdev) +{ + struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data; + + if (bif->dev != NULL) { + struct rc32434_local *lp = (struct rc32434_local *)bif->dev->priv; + if (lp != NULL) { + if (lp->eth_regs) + iounmap((void*)lp->eth_regs); + if (lp->rx_dma_regs) + iounmap((void*)lp->rx_dma_regs); + if (lp->tx_dma_regs) + iounmap((void*)lp->tx_dma_regs); + if (lp->td_ring) + kfree((void*)KSEG0ADDR(lp->td_ring)); + +#ifdef RC32434_PROC_DEBUG + if (lp->ps) { + remove_proc_entry(bif->name, proc_net); + } +#endif + kfree(lp); + } + + platform_set_drvdata(pdev, NULL); + unregister_netdev(bif->dev); + free_netdev(bif->dev); + kfree(bif->dev); + } + return 0; +} + + +static int rc32434_open(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + + /* Initialize */ + if (rc32434_init(dev)) { + ERR("Error: cannot open the Ethernet device\n"); + return -EAGAIN; + } + + /* Install the interrupt handler that handles the Done Finished Ovr and Und Events */ + if (request_irq(lp->rx_irq, &rc32434_rx_dma_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "Korina ethernet Rx", dev)) { + ERR(": unable to get Rx DMA IRQ %d\n", + lp->rx_irq); + return -EAGAIN; + } + if (request_irq(lp->tx_irq, &rc32434_tx_dma_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "Korina ethernet Tx", dev)) { + ERR(": unable to get Tx DMA IRQ %d\n", + lp->tx_irq); + free_irq(lp->rx_irq, dev); + return -EAGAIN; + } + +#ifdef RC32434_REVISION + /* Install handler for overrun error. */ + if (request_irq(lp->ovr_irq, &rc32434_ovr_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "Ethernet Overflow", dev)) { + ERR(": unable to get OVR IRQ %d\n", + lp->ovr_irq); + free_irq(lp->rx_irq, dev); + free_irq(lp->tx_irq, dev); + return -EAGAIN; + } +#endif + + /* Install handler for underflow error. */ + if (request_irq(lp->und_irq, &rc32434_und_interrupt, + SA_SHIRQ | SA_INTERRUPT, + "Ethernet Underflow", dev)) { + ERR(": unable to get UND IRQ %d\n", + lp->und_irq); + free_irq(lp->rx_irq, dev); + free_irq(lp->tx_irq, dev); +#ifdef RC32434_REVISION + free_irq(lp->ovr_irq, dev); +#endif + return -EAGAIN; + } + + + return 0; +} + + + + +static int rc32434_close(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + u32 tmp; + + /* Disable interrupts */ + disable_irq(lp->rx_irq); + disable_irq(lp->tx_irq); +#ifdef RC32434_REVISION + disable_irq(lp->ovr_irq); +#endif + disable_irq(lp->und_irq); + + tmp = __raw_readl(&lp->tx_dma_regs->dmasm); + tmp = tmp | DMASM_f_m | DMASM_e_m; + __raw_writel(tmp, &lp->tx_dma_regs->dmasm); + + tmp = __raw_readl(&lp->rx_dma_regs->dmasm); + tmp = tmp | DMASM_d_m | DMASM_h_m | DMASM_e_m; + __raw_writel(tmp, &lp->rx_dma_regs->dmasm); + + free_irq(lp->rx_irq, dev); + free_irq(lp->tx_irq, dev); +#ifdef RC32434_REVISION + free_irq(lp->ovr_irq, dev); +#endif + free_irq(lp->und_irq, dev); + return 0; +} + + +/* transmit packet */ +static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + unsigned long flags; + u32 length; + DMAD_t td; + + + spin_lock_irqsave(&lp->lock, flags); + + td = &lp->td_ring[lp->tx_chain_tail]; + + /* stop queue when full, drop pkts if queue already full */ + if(lp->tx_count >= (RC32434_NUM_TDS - 2)) { + lp->tx_full = 1; + + if(lp->tx_count == (RC32434_NUM_TDS - 2)) { + netif_stop_queue(dev); + } + else { + lp->stats.tx_dropped++; + dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&lp->lock, flags); + return 1; + } + } + + lp->tx_count ++; + + lp->tx_skb[lp->tx_chain_tail] = skb; + + length = skb->len; + + /* Setup the transmit descriptor. */ + td->ca = CPHYSADDR(skb->data); + + if(__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0) { + if( lp->tx_chain_status == empty ) { + td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ + lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ + __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */ + lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */ + } + else { + td->control = DMA_COUNT(length) |DMAD_cof_m|DMAD_iof_m; /* Update tail */ + lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */ + lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */ + lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ + __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */ + lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */ + lp->tx_chain_status = empty; + } + } + else { + if( lp->tx_chain_status == empty ) { + td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ + lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ + lp->tx_chain_status = filled; + } + else { + td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ + lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */ + lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */ + lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ + } + } + + dev->trans_start = jiffies; + + spin_unlock_irqrestore(&lp->lock, flags); + + return 0; +} + + +/* Ethernet MII-PHY Handler */ +static void rc32434_mii_handler(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + unsigned long flags; + unsigned long duplex_status; + int port_addr = (lp->rx_irq == 0x2c? 1:0) << 8; + + spin_lock_irqsave(&lp->lock, flags); + + /* Two ports are using the same MII, the difference is the PHY address */ + __raw_writel(0, &rc32434_eth0_regs->miimcfg); + __raw_writel(0, &rc32434_eth0_regs->miimcmd); + __raw_writel(port_addr |0x05, &rc32434_eth0_regs->miimaddr); + __raw_writel(MIIMCMD_scn_m, &rc32434_eth0_regs->miimcmd); + while(__raw_readl(&rc32434_eth0_regs->miimind) & MIIMIND_nv_m); + + ERR("irq:%x port_addr:%x RDD:%x\n", + lp->rx_irq, port_addr, __raw_readl(&rc32434_eth0_regs->miimrdd)); + duplex_status = (__raw_readl(&rc32434_eth0_regs->miimrdd) & 0x140)? ETHMAC2_fd_m: 0; + if(duplex_status != lp->duplex_mode) { + ERR("The MII-PHY is Auto-negotiated to %s-Duplex mode for Eth-%x\n", duplex_status? "Full":"Half", lp->rx_irq == 0x2c? 1:0); + lp->duplex_mode = duplex_status; + rc32434_restart(dev); + } + + lp->mii_phy_timer.expires = jiffies + 10 * HZ; + add_timer(&lp->mii_phy_timer); + + spin_unlock_irqrestore(&lp->lock, flags); + +} + +#ifdef RC32434_REVISION +/* Ethernet Rx Overflow interrupt */ +static irqreturn_t +rc32434_ovr_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct rc32434_local *lp; + unsigned int ovr; + irqreturn_t retval = IRQ_NONE; + + ASSERT(dev != NULL); + + lp = (struct rc32434_local *)dev->priv; + spin_lock(&lp->lock); + ovr = __raw_readl(&lp->eth_regs->ethintfc); + + if(ovr & ETHINTFC_ovr_m) { + netif_stop_queue(dev); + + /* clear OVR bit */ + __raw_writel((ovr & ~ETHINTFC_ovr_m), &lp->eth_regs->ethintfc); + + /* Restart interface */ + rc32434_restart(dev); + retval = IRQ_HANDLED; + } + spin_unlock(&lp->lock); + + return retval; +} + +#endif + + +/* Ethernet Tx Underflow interrupt */ +static irqreturn_t +rc32434_und_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct rc32434_local *lp; + unsigned int und; + irqreturn_t retval = IRQ_NONE; + + ASSERT(dev != NULL); + + lp = (struct rc32434_local *)dev->priv; + + spin_lock(&lp->lock); + + und = __raw_readl(&lp->eth_regs->ethintfc); + + if(und & ETHINTFC_und_m) { + netif_stop_queue(dev); + + __raw_writel((und & ~ETHINTFC_und_m), &lp->eth_regs->ethintfc); + + /* Restart interface */ + rc32434_restart(dev); + retval = IRQ_HANDLED; + } + + spin_unlock(&lp->lock); + + return retval; +} + + +/* Ethernet Rx DMA interrupt */ +static irqreturn_t +rc32434_rx_dma_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct rc32434_local* lp; + volatile u32 dmas,dmasm; + irqreturn_t retval; + + ASSERT(dev != NULL); + + lp = (struct rc32434_local *)dev->priv; + + spin_lock(&lp->lock); + dmas = __raw_readl(&lp->rx_dma_regs->dmas); + if(dmas & (DMAS_d_m|DMAS_h_m|DMAS_e_m)) { + /* Mask D H E bit in Rx DMA */ + dmasm = __raw_readl(&lp->rx_dma_regs->dmasm); + __raw_writel(dmasm | (DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); +#ifdef CONFIG_IDT_USE_NAPI + if(netif_rx_schedule_prep(dev)) + __netif_rx_schedule(dev); +#else + tasklet_hi_schedule(lp->rx_tasklet); +#endif + + if (dmas & DMAS_e_m) + ERR(": DMA error\n"); + + retval = IRQ_HANDLED; + } + else + retval = IRQ_NONE; + + spin_unlock(&lp->lock); + return retval; +} + +#ifdef CONFIG_IDT_USE_NAPI +static int rc32434_poll(struct net_device *rx_data_dev, int *budget) +#else +static void rc32434_rx_tasklet(unsigned long rx_data_dev) +#endif +{ + struct net_device *dev = (struct net_device *)rx_data_dev; + struct rc32434_local* lp = netdev_priv(dev); + volatile DMAD_t rd = &lp->rd_ring[lp->rx_next_done]; + struct sk_buff *skb, *skb_new; + u8* pkt_buf; + u32 devcs, count, pkt_len, pktuncrc_len; + volatile u32 dmas; +#ifdef CONFIG_IDT_USE_NAPI + u32 received = 0; + int rx_work_limit = min(*budget,dev->quota); +#else + unsigned long flags; + spin_lock_irqsave(&lp->lock, flags); +#endif + + while ( (count = RC32434_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) { +#ifdef CONFIG_IDT_USE_NAPI + if(--rx_work_limit <0) + { + break; + } +#endif + /* init the var. used for the later operations within the while loop */ + skb_new = NULL; + devcs = rd->devcs; + pkt_len = RCVPKT_LENGTH(devcs); + skb = lp->rx_skb[lp->rx_next_done]; + + if (count < 64) { + lp->stats.rx_errors++; + lp->stats.rx_dropped++; + } + else if ((devcs & ( ETHRX_ld_m)) != ETHRX_ld_m) { + /* check that this is a whole packet */ + /* WARNING: DMA_FD bit incorrectly set in Rc32434 (errata ref #077) */ + lp->stats.rx_errors++; + lp->stats.rx_dropped++; + } + else if ( (devcs & ETHRX_rok_m) ) { + + { + /* must be the (first and) last descriptor then */ + pkt_buf = (u8*)lp->rx_skb[lp->rx_next_done]->data; + + pktuncrc_len = pkt_len - 4; + /* invalidate the cache */ + dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len); + + /* Malloc up new buffer. */ + skb_new = dev_alloc_skb(RC32434_RBSIZE + 2); + + if (skb_new != NULL){ + /* Make room */ + skb_put(skb, pktuncrc_len); + + skb->protocol = eth_type_trans(skb, dev); + + /* pass the packet to upper layers */ +#ifdef CONFIG_IDT_USE_NAPI + netif_receive_skb(skb); +#else + netif_rx(skb); +#endif + + dev->last_rx = jiffies; + lp->stats.rx_packets++; + lp->stats.rx_bytes += pktuncrc_len; + + if (IS_RCV_MP(devcs)) + lp->stats.multicast++; + + /* 16 bit align */ + skb_reserve(skb_new, 2); + + skb_new->dev = dev; + lp->rx_skb[lp->rx_next_done] = skb_new; + } + else { + ERR("no memory, dropping rx packet.\n"); + lp->stats.rx_errors++; + lp->stats.rx_dropped++; + } + } + + } + else { + /* This should only happen if we enable accepting broken packets */ + lp->stats.rx_errors++; + lp->stats.rx_dropped++; + + /* add statistics counters */ + if (IS_RCV_CRC_ERR(devcs)) { + DBG(2, "RX CRC error\n"); + lp->stats.rx_crc_errors++; + } + else if (IS_RCV_LOR_ERR(devcs)) { + DBG(2, "RX LOR error\n"); + lp->stats.rx_length_errors++; + } + else if (IS_RCV_LE_ERR(devcs)) { + DBG(2, "RX LE error\n"); + lp->stats.rx_length_errors++; + } + else if (IS_RCV_OVR_ERR(devcs)) { + lp->stats.rx_over_errors++; + } + else if (IS_RCV_CV_ERR(devcs)) { + /* code violation */ + DBG(2, "RX CV error\n"); + lp->stats.rx_frame_errors++; + } + else if (IS_RCV_CES_ERR(devcs)) { + DBG(2, "RX Preamble error\n"); + } + } + + rd->devcs = 0; + + /* restore descriptor's curr_addr */ + if(skb_new) + rd->ca = CPHYSADDR(skb_new->data); + else + rd->ca = CPHYSADDR(skb->data); + + rd->control = DMA_COUNT(RC32434_RBSIZE) |DMAD_cod_m |DMAD_iod_m; + lp->rd_ring[(lp->rx_next_done-1)& RC32434_RDS_MASK].control &= ~(DMAD_cod_m); + + lp->rx_next_done = (lp->rx_next_done + 1) & RC32434_RDS_MASK; + rd = &lp->rd_ring[lp->rx_next_done]; + __raw_writel( ~DMAS_d_m, &lp->rx_dma_regs->dmas); + } +#ifdef CONFIG_IDT_USE_NAPI + dev->quota -= received; + *budget =- received; + if(rx_work_limit < 0) + goto not_done; +#endif + + dmas = __raw_readl(&lp->rx_dma_regs->dmas); + + if(dmas & DMAS_h_m) { + __raw_writel( ~(DMAS_h_m | DMAS_e_m), &lp->rx_dma_regs->dmas); +#ifdef RC32434_PROC_DEBUG + lp->dma_halt_cnt++; +#endif + rd->devcs = 0; + skb = lp->rx_skb[lp->rx_next_done]; + rd->ca = CPHYSADDR(skb->data); + rc32434_chain_rx(lp,rd); + } + +#ifdef CONFIG_IDT_USE_NAPI + netif_rx_complete(dev); +#endif + /* Enable D H E bit in Rx DMA */ + __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m |DMASM_e_m), &lp->rx_dma_regs->dmasm); +#ifdef CONFIG_IDT_USE_NAPI + return 0; + not_done: + return 1; +#else + spin_unlock_irqrestore(&lp->lock, flags); + return; +#endif + + +} + + + +/* Ethernet Tx DMA interrupt */ +static irqreturn_t +rc32434_tx_dma_interrupt(int irq, void *dev_id) +{ + struct net_device *dev = (struct net_device *)dev_id; + struct rc32434_local *lp; + volatile u32 dmas,dmasm; + irqreturn_t retval; + + ASSERT(dev != NULL); + + lp = (struct rc32434_local *)dev->priv; + + spin_lock(&lp->lock); + + dmas = __raw_readl(&lp->tx_dma_regs->dmas); + + if (dmas & (DMAS_f_m | DMAS_e_m)) { + dmasm = __raw_readl(&lp->tx_dma_regs->dmasm); + /* Mask F E bit in Tx DMA */ + __raw_writel(dmasm | (DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); + + tasklet_hi_schedule(lp->tx_tasklet); + + if(lp->tx_chain_status == filled && (__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0)) { + __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); + lp->tx_chain_status = empty; + lp->tx_chain_head = lp->tx_chain_tail; + dev->trans_start = jiffies; + } + + if (dmas & DMAS_e_m) + ERR(": DMA error\n"); + + retval = IRQ_HANDLED; + } + else + retval = IRQ_NONE; + + spin_unlock(&lp->lock); + + return retval; +} + + +static void rc32434_tx_tasklet(unsigned long tx_data_dev) +{ + struct net_device *dev = (struct net_device *)tx_data_dev; + struct rc32434_local* lp = (struct rc32434_local *)dev->priv; + volatile DMAD_t td = &lp->td_ring[lp->tx_next_done]; + u32 devcs; + unsigned long flags; + volatile u32 dmas; + + spin_lock_irqsave(&lp->lock, flags); + + /* process all desc that are done */ + while(IS_DMA_FINISHED(td->control)) { + if(lp->tx_full == 1) { + netif_wake_queue(dev); + lp->tx_full = 0; + } + + devcs = lp->td_ring[lp->tx_next_done].devcs; + if ((devcs & (ETHTX_fd_m | ETHTX_ld_m)) != (ETHTX_fd_m | ETHTX_ld_m)) { + lp->stats.tx_errors++; + lp->stats.tx_dropped++; + + /* should never happen */ + DBG(1, __FUNCTION__ ": split tx ignored\n"); + } + else if (IS_TX_TOK(devcs)) { + lp->stats.tx_packets++; + } + else { + lp->stats.tx_errors++; + lp->stats.tx_dropped++; + + /* underflow */ + if (IS_TX_UND_ERR(devcs)) + lp->stats.tx_fifo_errors++; + + /* oversized frame */ + if (IS_TX_OF_ERR(devcs)) + lp->stats.tx_aborted_errors++; + + /* excessive deferrals */ + if (IS_TX_ED_ERR(devcs)) + lp->stats.tx_carrier_errors++; + + /* collisions: medium busy */ + if (IS_TX_EC_ERR(devcs)) + lp->stats.collisions++; + + /* late collision */ + if (IS_TX_LC_ERR(devcs)) + lp->stats.tx_window_errors++; + + } + + /* We must always free the original skb */ + if (lp->tx_skb[lp->tx_next_done] != NULL) { + dev_kfree_skb_any(lp->tx_skb[lp->tx_next_done]); + lp->tx_skb[lp->tx_next_done] = NULL; + } + + lp->td_ring[lp->tx_next_done].control = DMAD_iof_m; + lp->td_ring[lp->tx_next_done].devcs = ETHTX_fd_m | ETHTX_ld_m; + lp->td_ring[lp->tx_next_done].link = 0; + lp->td_ring[lp->tx_next_done].ca = 0; + lp->tx_count --; + + /* go on to next transmission */ + lp->tx_next_done = (lp->tx_next_done + 1) & RC32434_TDS_MASK; + td = &lp->td_ring[lp->tx_next_done]; + + } + + dmas = __raw_readl(&lp->tx_dma_regs->dmas); + __raw_writel( ~dmas, &lp->tx_dma_regs->dmas); + + /* Enable F E bit in Tx DMA */ + __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); + spin_unlock_irqrestore(&lp->lock, flags); + +} + + +static struct net_device_stats * rc32434_get_stats(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + return &lp->stats; +} + + +/* + * Set or clear the multicast filter for this adaptor. + */ +static void rc32434_multicast_list(struct net_device *dev) +{ + /* listen to broadcasts always and to treat */ + /* IFF bits independantly */ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + unsigned long flags; + u32 recognise = ETHARC_ab_m; /* always accept broadcasts */ + + if (dev->flags & IFF_PROMISC) /* set promiscuous mode */ + recognise |= ETHARC_pro_m; + + if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) + recognise |= ETHARC_am_m; /* all multicast & bcast */ + else if (dev->mc_count > 0) { + DBG(2, __FUNCTION__ ": mc_count %d\n", dev->mc_count); + recognise |= ETHARC_am_m; /* for the time being */ + } + + spin_lock_irqsave(&lp->lock, flags); + __raw_writel(recognise, &lp->eth_regs->etharc); + spin_unlock_irqrestore(&lp->lock, flags); +} + + +static void rc32434_tx_timeout(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + unsigned long flags; + + spin_lock_irqsave(&lp->lock, flags); + rc32434_restart(dev); + spin_unlock_irqrestore(&lp->lock, flags); + +} + + +/* + * Initialize the RC32434 ethernet controller. + */ +static int rc32434_init(struct net_device *dev) +{ + struct rc32434_local *lp = (struct rc32434_local *)dev->priv; + int i, j; + + /* Disable DMA */ + rc32434_abort_tx(dev); + rc32434_abort_rx(dev); + + /* reset ethernet logic */ + __raw_writel(0, &lp->eth_regs->ethintfc); + while((__raw_readl(&lp->eth_regs->ethintfc) & ETHINTFC_rip_m)) + dev->trans_start = jiffies; + + /* Enable Ethernet Interface */ + __raw_writel(ETHINTFC_en_m, &lp->eth_regs->ethintfc); + +#ifndef CONFIG_IDT_USE_NAPI + tasklet_disable(lp->rx_tasklet); +#endif + tasklet_disable(lp->tx_tasklet); + + /* Initialize the transmit Descriptors */ + for (i = 0; i < RC32434_NUM_TDS; i++) { + lp->td_ring[i].control = DMAD_iof_m; + lp->td_ring[i].devcs = ETHTX_fd_m | ETHTX_ld_m; + lp->td_ring[i].ca = 0; + lp->td_ring[i].link = 0; + if (lp->tx_skb[i] != NULL) { + dev_kfree_skb_any(lp->tx_skb[i]); + lp->tx_skb[i] = NULL; + } + } + lp->tx_next_done = lp->tx_chain_head = lp->tx_chain_tail = lp->tx_full = lp->tx_count = 0; + lp-> tx_chain_status = empty; + + /* + * Initialize the receive descriptors so that they + * become a circular linked list, ie. let the last + * descriptor point to the first again. + */ + for (i=0; irx_skb[i]; + + if (lp->rx_skb[i] == NULL) { + skb = dev_alloc_skb(RC32434_RBSIZE + 2); + if (skb == NULL) { + ERR("No memory in the system\n"); + for (j = 0; j < RC32434_NUM_RDS; j ++) + if (lp->rx_skb[j] != NULL) + dev_kfree_skb_any(lp->rx_skb[j]); + + return 1; + } + else { + skb->dev = dev; + skb_reserve(skb, 2); + lp->rx_skb[i] = skb; + lp->rd_ring[i].ca = CPHYSADDR(skb->data); + + } + } + lp->rd_ring[i].control = DMAD_iod_m | DMA_COUNT(RC32434_RBSIZE); + lp->rd_ring[i].devcs = 0; + lp->rd_ring[i].ca = CPHYSADDR(skb->data); + lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); + + } + /* loop back */ + lp->rd_ring[RC32434_NUM_RDS-1].link = CPHYSADDR(&lp->rd_ring[0]); + lp->rx_next_done = 0; + + lp->rd_ring[RC32434_NUM_RDS-1].control |= DMAD_cod_m; + lp->rx_chain_head = 0; + lp->rx_chain_tail = 0; + lp->rx_chain_status = empty; + + __raw_writel(0, &lp->rx_dma_regs->dmas); + /* Start Rx DMA */ + rc32434_start_rx(lp, &lp->rd_ring[0]); + + /* Enable F E bit in Tx DMA */ + __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); + /* Enable D H E bit in Rx DMA */ + __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); + + /* Accept only packets destined for this Ethernet device address */ + __raw_writel(ETHARC_ab_m, &lp->eth_regs->etharc); + + /* Set all Ether station address registers to their initial values */ + __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal0); + __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah0); + + __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal1); + __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah1); + + __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal2); + __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah2); + + __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal3); + __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah3); + + + /* Frame Length Checking, Pad Enable, CRC Enable, Full Duplex set */ + __raw_writel(ETHMAC2_pe_m | ETHMAC2_cen_m | ETHMAC2_fd_m, &lp->eth_regs->ethmac2); + //ETHMAC2_flc_m ETHMAC2_fd_m lp->duplex_mode + + /* Back to back inter-packet-gap */ + __raw_writel(0x15, &lp->eth_regs->ethipgt); + /* Non - Back to back inter-packet-gap */ + __raw_writel(0x12, &lp->eth_regs->ethipgr); + + /* Management Clock Prescaler Divisor */ + /* Clock independent setting */ + __raw_writel(((idt_cpu_freq)/MII_CLOCK+1) & ~1, + &lp->eth_regs->ethmcp); + + /* don't transmit until fifo contains 48b */ + __raw_writel(48, &lp->eth_regs->ethfifott); + + __raw_writel(ETHMAC1_re_m, &lp->eth_regs->ethmac1); + +#ifndef CONFIG_IDT_USE_NAPI + tasklet_enable(lp->rx_tasklet); +#endif + tasklet_enable(lp->tx_tasklet); + + netif_start_queue(dev); + + return 0; +} + +static struct platform_driver korina_driver = { + .driver.name = "korina", + .probe = rc32434_probe, + .remove = rc32434_remove, +}; + +static int __init rc32434_init_module(void) +{ + return platform_driver_register(&korina_driver); +} + +static void rc32434_cleanup_module(void) +{ + return platform_driver_unregister(&korina_driver); +} + +module_init(rc32434_init_module); +module_exit(rc32434_cleanup_module); diff --git a/target/linux/rb532-2.6/files/drivers/net/rc32434_eth.h b/target/linux/rb532-2.6/files/drivers/net/rc32434_eth.h new file mode 100644 index 0000000000..eaa0bfe51b --- /dev/null +++ b/target/linux/rb532-2.6/files/drivers/net/rc32434_eth.h @@ -0,0 +1,178 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * Definitions for IDT RC32434 on-chip ethernet controller. + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2004 rkt, neb + * + * Initial Release + * + * Aug 2004 + * + * Added NAPI + * + ************************************************************************** + */ + + +#include +#include +#include + +#define CONFIG_IDT_USE_NAPI 1 +#define RC32434_DEBUG 2 +//#define RC32434_PROC_DEBUG +#undef RC32434_DEBUG + +#ifdef RC32434_DEBUG + +/* use 0 for production, 1 for verification, >2 for debug */ +static int rc32434_debug = RC32434_DEBUG; +#define ASSERT(expr) \ + if(!(expr)) { \ + printk( "Assertion failed! %s,%s,%s,line=%d\n", \ + #expr,__FILE__,__FUNCTION__,__LINE__); } +#define DBG(lvl, format, arg...) if (rc32434_debug > lvl) printk(KERN_INFO "%s: " format, dev->name , ## arg) +#else +#define ASSERT(expr) do {} while (0) +#define DBG(lvl, format, arg...) do {} while (0) +#endif + +#define INFO(format, arg...) printk(KERN_INFO "%s: " format, dev->name , ## arg) +#define ERR(format, arg...) printk(KERN_ERR "%s: " format, dev->name , ## arg) +#define WARN(format, arg...) printk(KERN_WARNING "%s: " format, dev->name , ## arg) + +/* the following must be powers of two */ +#ifdef CONFIG_IDT_USE_NAPI +#define RC32434_NUM_RDS 64 /* number of receive descriptors */ +#define RC32434_NUM_TDS 64 /* number of transmit descriptors */ +#else +#define RC32434_NUM_RDS 128 /* number of receive descriptors */ +#define RC32434_NUM_TDS 128 /* number of transmit descriptors */ +#endif + +#define RC32434_RBSIZE 1536 /* size of one resource buffer = Ether MTU */ +#define RC32434_RDS_MASK (RC32434_NUM_RDS-1) +#define RC32434_TDS_MASK (RC32434_NUM_TDS-1) +#define RD_RING_SIZE (RC32434_NUM_RDS * sizeof(struct DMAD_s)) +#define TD_RING_SIZE (RC32434_NUM_TDS * sizeof(struct DMAD_s)) + +#define RC32434_TX_TIMEOUT HZ * 100 + +#define rc32434_eth0_regs ((ETH_t)(ETH0_VirtualAddress)) +#define rc32434_eth1_regs ((ETH_t)(ETH1_VirtualAddress)) + +enum status { filled, empty}; +#define IS_DMA_FINISHED(X) (((X) & (DMAD_f_m)) != 0) +#define IS_DMA_DONE(X) (((X) & (DMAD_d_m)) != 0) + + +/* Information that need to be kept for each board. */ +struct rc32434_local { + ETH_t eth_regs; + DMA_Chan_t rx_dma_regs; + DMA_Chan_t tx_dma_regs; + volatile DMAD_t td_ring; /* transmit descriptor ring */ + volatile DMAD_t rd_ring; /* receive descriptor ring */ + + struct sk_buff* tx_skb[RC32434_NUM_TDS]; /* skbuffs for pkt to trans */ + struct sk_buff* rx_skb[RC32434_NUM_RDS]; /* skbuffs for pkt to trans */ + +#ifndef CONFIG_IDT_USE_NAPI + struct tasklet_struct * rx_tasklet; +#endif + struct tasklet_struct * tx_tasklet; + + int rx_next_done; + int rx_chain_head; + int rx_chain_tail; + enum status rx_chain_status; + + int tx_next_done; + int tx_chain_head; + int tx_chain_tail; + enum status tx_chain_status; + int tx_count; + int tx_full; + + struct timer_list mii_phy_timer; + unsigned long duplex_mode; + + int rx_irq; + int tx_irq; + int ovr_irq; + int und_irq; + + struct net_device_stats stats; + spinlock_t lock; + + /* debug /proc entry */ + struct proc_dir_entry *ps; + int dma_halt_cnt; int dma_run_cnt; +}; + +extern unsigned int idt_cpu_freq; + +/* Index to functions, as function prototypes. */ +static int rc32434_open(struct net_device *dev); +static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev); +static void rc32434_mii_handler(unsigned long data); +static irqreturn_t rc32434_und_interrupt(int irq, void *dev_id); +static irqreturn_t rc32434_rx_dma_interrupt(int irq, void *dev_id); +static irqreturn_t rc32434_tx_dma_interrupt(int irq, void *dev_id); +#ifdef RC32434_REVISION +static irqreturn_t rc32434_ovr_interrupt(int irq, void *dev_id); +#endif +static int rc32434_close(struct net_device *dev); +static struct net_device_stats *rc32434_get_stats(struct net_device *dev); +static void rc32434_multicast_list(struct net_device *dev); +static int rc32434_init(struct net_device *dev); +static void rc32434_tx_timeout(struct net_device *dev); + +static void rc32434_tx_tasklet(unsigned long tx_data_dev); +#ifdef CONFIG_IDT_USE_NAPI +static int rc32434_poll(struct net_device *rx_data_dev, int *budget); +#else +static void rc32434_rx_tasklet(unsigned long rx_data_dev); +#endif +static void rc32434_cleanup_module(void); + + +static inline void rc32434_abort_dma(struct net_device *dev, DMA_Chan_t ch) +{ + if (__raw_readl(&ch->dmac) & DMAC_run_m) { + __raw_writel(0x10, &ch->dmac); + + while (!(__raw_readl(&ch->dmas) & DMAS_h_m)) + dev->trans_start = jiffies; + + __raw_writel(0, &ch->dmas); + } + + __raw_writel(0, &ch->dmadptr); + __raw_writel(0, &ch->dmandptr); +} diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/ddr.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/ddr.h new file mode 100644 index 0000000000..03923a6588 --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/ddr.h @@ -0,0 +1,173 @@ +#ifndef __IDT_DDR_H__ +#define __IDT_DDR_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DDR register definition. + * + * File : $Id: ddr.h,v 1.2 2002/06/06 18:34:03 astichte Exp $ + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Update : + * $Log: ddr.h,v $ + * Revision 1.2 2002/06/06 18:34:03 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.1 2002/05/29 17:33:21 sysarch + * jba File moved from vcode/include/idt/acacia + * + * + ******************************************************************************/ + +enum +{ + DDR0_PhysicalAddress = 0x18018000, + DDR_PhysicalAddress = DDR0_PhysicalAddress, // Default + + DDR0_VirtualAddress = 0xb8018000, + DDR_VirtualAddress = DDR0_VirtualAddress, // Default +} ; + +typedef struct DDR_s +{ + u32 ddrbase ; + u32 ddrmask ; + u32 res1; + u32 res2; + u32 ddrc ; + u32 ddrabase ; + u32 ddramask ; + u32 ddramap ; + u32 ddrcust; + u32 ddrrdc; + u32 ddrspare; +} volatile *DDR_t ; + +enum +{ + DDR0BASE_baseaddr_b = 16, + DDR0BASE_baseaddr_m = 0xffff0000, + + DDR0MASK_mask_b = 16, + DDR0MASK_mask_m = 0xffff0000, + + DDR1BASE_baseaddr_b = 16, + DDR1BASE_baseaddr_m = 0xffff0000, + + DDR1MASK_mask_b = 16, + DDR1MASK_mask_m = 0xffff0000, + + DDRC_ata_b = 5, + DDRC_ata_m = 0x000000E0, + DDRC_dbw_b = 8, + DDRC_dbw_m = 0x00000100, + DDRC_wr_b = 9, + DDRC_wr_m = 0x00000600, + DDRC_ps_b = 11, + DDRC_ps_m = 0x00001800, + DDRC_dtype_b = 13, + DDRC_dtype_m = 0x0000e000, + DDRC_rfc_b = 16, + DDRC_rfc_m = 0x000f0000, + DDRC_rp_b = 20, + DDRC_rp_m = 0x00300000, + DDRC_ap_b = 22, + DDRC_ap_m = 0x00400000, + DDRC_rcd_b = 23, + DDRC_rcd_m = 0x01800000, + DDRC_cl_b = 25, + DDRC_cl_m = 0x06000000, + DDRC_dbm_b = 27, + DDRC_dbm_m = 0x08000000, + DDRC_sds_b = 28, + DDRC_sds_m = 0x10000000, + DDRC_atp_b = 29, + DDRC_atp_m = 0x60000000, + DDRC_re_b = 31, + DDRC_re_m = 0x80000000, + + DDRRDC_ces_b = 0, + DDRRDC_ces_m = 0x00000001, + DDRRDC_ace_b = 1, + DDRRDC_ace_m = 0x00000002, + + DDRABASE_baseaddr_b = 16, + DDRABASE_baseaddr_m = 0xffff0000, + + DDRAMASK_mask_b = 16, + DDRAMASK_mask_m = 0xffff0000, + + DDRAMAP_map_b = 16, + DDRAMAP_map_m = 0xffff0000, + + DDRCUST_cs_b = 0, + DDRCUST_cs_m = 0x00000003, + DDRCUST_we_b = 2, + DDRCUST_we_m = 0x00000004, + DDRCUST_ras_b = 3, + DDRCUST_ras_m = 0x00000008, + DDRCUST_cas_b = 4, + DDRCUST_cas_m = 0x00000010, + DDRCUST_cke_b = 5, + DDRCUST_cke_m = 0x00000020, + DDRCUST_ba_b = 6, + DDRCUST_ba_m = 0x000000c0, + + RCOUNT_rcount_b = 0, + RCOUNT_rcount_m = 0x0000ffff, + + RCOMPARE_rcompare_b = 0, + RCOMPARE_rcompare_m = 0x0000ffff, + + RTC_ce_b = 0, + RTC_ce_m = 0x00000001, + RTC_to_b = 1, + RTC_to_m = 0x00000002, + RTC_rqe_b = 2, + RTC_rqe_m = 0x00000004, + + DDRDQSC_dm_b = 0, + DDRDQSC_dm_m = 0x00000003, + DDRDQSC_dqsbs_b = 2, + DDRDQSC_dqsbs_m = 0x000000fc, + DDRDQSC_db_b = 8, + DDRDQSC_db_m = 0x00000100, + DDRDQSC_dbsp_b = 9, + DDRDQSC_dbsp_m = 0x01fffe00, + DDRDQSC_bdp_b = 25, + DDRDQSC_bdp_m = 0x7e000000, + + DDRDLLC_eao_b = 0, + DDRDLLC_eao_m = 0x00000001, + DDRDLLC_eo_b = 1, + DDRDLLC_eo_m = 0x0000003e, + DDRDLLC_fs_b = 6, + DDRDLLC_fs_m = 0x000000c0, + DDRDLLC_as_b = 8, + DDRDLLC_as_m = 0x00000700, + DDRDLLC_sp_b = 11, + DDRDLLC_sp_m = 0x001ff800, + + DDRDLLFC_men_b = 0, + DDRDLLFC_men_m = 0x00000001, + DDRDLLFC_aen_b = 1, + DDRDLLFC_aen_m = 0x00000002, + DDRDLLFC_ff_b = 2, + DDRDLLFC_ff_m = 0x00000004, + + DDRDLLTA_addr_b = 2, + DDRDLLTA_addr_m = 0xfffffffc, + + DDRDLLED_dbe_b = 0, + DDRDLLED_dbe_m = 0x00000001, + DDRDLLED_dte_b = 1, + DDRDLLED_dte_m = 0x00000002, + + +} ; + +#endif // __IDT_DDR_H__ diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma.h new file mode 100644 index 0000000000..2124f7e510 --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma.h @@ -0,0 +1,168 @@ +#ifndef __IDT_DMA_H__ +#define __IDT_DMA_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $ + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Update : + * $Log: dma.h,v $ + * Revision 1.3 2002/06/06 18:34:03 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.2 2002/06/05 18:30:46 astichte + * Removed IDTField + * + * Revision 1.1 2002/05/29 17:33:21 sysarch + * jba File moved from vcode/include/idt/acacia + * + * + ******************************************************************************/ + +enum +{ + DMA0_PhysicalAddress = 0x18040000, + DMA_PhysicalAddress = DMA0_PhysicalAddress, // Default + + DMA0_VirtualAddress = 0xb8040000, + DMA_VirtualAddress = DMA0_VirtualAddress, // Default +} ; + +/* + * DMA descriptor (in physical memory). + */ + +typedef struct DMAD_s +{ + u32 control ; // Control. use DMAD_* + u32 ca ; // Current Address. + u32 devcs ; // Device control and status. + u32 link ; // Next descriptor in chain. +} volatile *DMAD_t ; + +enum +{ + DMAD_size = sizeof (struct DMAD_s), + DMAD_count_b = 0, // in DMAD_t -> control + DMAD_count_m = 0x0003ffff, // in DMAD_t -> control + DMAD_ds_b = 20, // in DMAD_t -> control + DMAD_ds_m = 0x00300000, // in DMAD_t -> control + DMAD_ds_ethRcv_v = 0, + DMAD_ds_ethXmt_v = 0, + DMAD_ds_memToFifo_v = 0, + DMAD_ds_fifoToMem_v = 0, + DMAD_ds_pciToMem_v = 0, + DMAD_ds_memToPci_v = 0, + + DMAD_devcmd_b = 22, // in DMAD_t -> control + DMAD_devcmd_m = 0x01c00000, // in DMAD_t -> control + DMAD_devcmd_byte_v = 0, //memory-to-memory + DMAD_devcmd_halfword_v = 1, //memory-to-memory + DMAD_devcmd_word_v = 2, //memory-to-memory + DMAD_devcmd_2words_v = 3, //memory-to-memory + DMAD_devcmd_4words_v = 4, //memory-to-memory + DMAD_devcmd_6words_v = 5, //memory-to-memory + DMAD_devcmd_8words_v = 6, //memory-to-memory + DMAD_devcmd_16words_v = 7, //memory-to-memory + DMAD_cof_b = 25, // chain on finished + DMAD_cof_m = 0x02000000, // + DMAD_cod_b = 26, // chain on done + DMAD_cod_m = 0x04000000, // + DMAD_iof_b = 27, // interrupt on finished + DMAD_iof_m = 0x08000000, // + DMAD_iod_b = 28, // interrupt on done + DMAD_iod_m = 0x10000000, // + DMAD_t_b = 29, // terminated + DMAD_t_m = 0x20000000, // + DMAD_d_b = 30, // done + DMAD_d_m = 0x40000000, // + DMAD_f_b = 31, // finished + DMAD_f_m = 0x80000000, // +} ; + +/* + * DMA register (within Internal Register Map). + */ + +struct DMA_Chan_s +{ + u32 dmac ; // Control. + u32 dmas ; // Status. + u32 dmasm ; // Mask. + u32 dmadptr ; // Descriptor pointer. + u32 dmandptr ; // Next descriptor pointer. +}; + +typedef struct DMA_Chan_s volatile *DMA_Chan_t ; + +//DMA_Channels use DMACH_count instead + +enum +{ + DMAC_run_b = 0, // + DMAC_run_m = 0x00000001, // + DMAC_dm_b = 1, // done mask + DMAC_dm_m = 0x00000002, // + DMAC_mode_b = 2, // + DMAC_mode_m = 0x0000000c, // + DMAC_mode_auto_v = 0, + DMAC_mode_burst_v = 1, + DMAC_mode_transfer_v = 2, //usually used + DMAC_mode_reserved_v = 3, + DMAC_a_b = 4, // + DMAC_a_m = 0x00000010, // + + DMAS_f_b = 0, // finished (sticky) + DMAS_f_m = 0x00000001, // + DMAS_d_b = 1, // done (sticky) + DMAS_d_m = 0x00000002, // + DMAS_c_b = 2, // chain (sticky) + DMAS_c_m = 0x00000004, // + DMAS_e_b = 3, // error (sticky) + DMAS_e_m = 0x00000008, // + DMAS_h_b = 4, // halt (sticky) + DMAS_h_m = 0x00000010, // + + DMASM_f_b = 0, // finished (1=mask) + DMASM_f_m = 0x00000001, // + DMASM_d_b = 1, // done (1=mask) + DMASM_d_m = 0x00000002, // + DMASM_c_b = 2, // chain (1=mask) + DMASM_c_m = 0x00000004, // + DMASM_e_b = 3, // error (1=mask) + DMASM_e_m = 0x00000008, // + DMASM_h_b = 4, // halt (1=mask) + DMASM_h_m = 0x00000010, // +} ; + +/* + * DMA channel definitions + */ + +enum +{ + DMACH_ethRcv = 0, + DMACH_ethXmt = 1, + DMACH_memToFifo = 2, + DMACH_fifoToMem = 3, + DMACH_pciToMem = 4, + DMACH_memToPci = 5, + + DMACH_count //must be last +}; + + +typedef struct DMAC_s +{ + struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_] +} volatile *DMA_t ; + +#endif // __IDT_DMA_H__ + diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma_v.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma_v.h new file mode 100644 index 0000000000..81cb40505d --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/dma_v.h @@ -0,0 +1,72 @@ +#ifndef __IDT_DMA_V_H__ +#define __IDT_DMA_V_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * DMA register definition. + * + * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $ + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Update : + * $Log: dma.h,v $ + * Revision 1.3 2002/06/06 18:34:03 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.2 2002/06/05 18:30:46 astichte + * Removed IDTField + * + * Revision 1.1 2002/05/29 17:33:21 sysarch + * jba File moved from vcode/include/idt/acacia + * + * + ******************************************************************************/ +#include +#include +#define DMA_CHAN_OFFSET 0x14 +#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0) +#define DMA_COUNT(count) \ + ((count) & DMAD_count_m) + +#define DMA_HALT_TIMEOUT 500 + + +static inline int rc32434_halt_dma(DMA_Chan_t ch) +{ + int timeout=1; + if (local_readl(&ch->dmac) & DMAC_run_m) { + local_writel(0, &ch->dmac); + for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) { + if (local_readl(&ch->dmas) & DMAS_h_m) { + local_writel(0, &ch->dmas); + break; + } + } + } + + return timeout ? 0 : 1; +} + +static inline void rc32434_start_dma(DMA_Chan_t ch, u32 dma_addr) +{ + local_writel(0, &ch->dmandptr); + local_writel(dma_addr, &ch->dmadptr); +} + +static inline void rc32434_chain_dma(DMA_Chan_t ch, u32 dma_addr) +{ + local_writel(dma_addr, &ch->dmandptr); +} + +#endif // __IDT_DMA_V_H__ + + + + + + + diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth.h new file mode 100644 index 0000000000..2f42976508 --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth.h @@ -0,0 +1,320 @@ +#ifndef __IDT_ETH_H__ +#define __IDT_ETH_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * Ethernet register definition. + * + * File : $Id: eth.h,v 1.3 2002/06/06 18:34:04 astichte Exp $ + * + * Author : Allen.Stichter@idt.com + * Date : 20020605 + * Update : + * $Log: eth.h,v $ + * Revision 1.3 2002/06/06 18:34:04 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.2 2002/06/05 18:19:46 astichte + * Added + * + * Revision 1.1 2002/05/29 17:33:22 sysarch + * jba File moved from vcode/include/idt/acacia + * + ******************************************************************************/ + +enum +{ + ETH0_PhysicalAddress = 0x18060000, + ETH_PhysicalAddress = ETH0_PhysicalAddress, // Default + + ETH0_VirtualAddress = 0xb8060000, + ETH_VirtualAddress = ETH0_VirtualAddress, // Default +} ; + +typedef struct +{ + u32 ethintfc ; + u32 ethfifott ; + u32 etharc ; + u32 ethhash0 ; + u32 ethhash1 ; + u32 ethu0 [4] ; // Reserved. + u32 ethpfs ; + u32 ethmcp ; + u32 eth_u1 [10] ; // Reserved. + u32 ethspare ; + u32 eth_u2 [42] ; // Reserved. + u32 ethsal0 ; + u32 ethsah0 ; + u32 ethsal1 ; + u32 ethsah1 ; + u32 ethsal2 ; + u32 ethsah2 ; + u32 ethsal3 ; + u32 ethsah3 ; + u32 ethrbc ; + u32 ethrpc ; + u32 ethrupc ; + u32 ethrfc ; + u32 ethtbc ; + u32 ethgpf ; + u32 eth_u9 [50] ; // Reserved. + u32 ethmac1 ; + u32 ethmac2 ; + u32 ethipgt ; + u32 ethipgr ; + u32 ethclrt ; + u32 ethmaxf ; + u32 eth_u10 ; // Reserved. + u32 ethmtest ; + u32 miimcfg ; + u32 miimcmd ; + u32 miimaddr ; + u32 miimwtd ; + u32 miimrdd ; + u32 miimind ; + u32 eth_u11 ; // Reserved. + u32 eth_u12 ; // Reserved. + u32 ethcfsa0 ; + u32 ethcfsa1 ; + u32 ethcfsa2 ; +} volatile *ETH_t; + +enum +{ + ETHINTFC_en_b = 0, + ETHINTFC_en_m = 0x00000001, + ETHINTFC_its_b = 1, + ETHINTFC_its_m = 0x00000002, + ETHINTFC_rip_b = 2, + ETHINTFC_rip_m = 0x00000004, + ETHINTFC_jam_b = 3, + ETHINTFC_jam_m = 0x00000008, + ETHINTFC_ovr_b = 4, + ETHINTFC_ovr_m = 0x00000010, + ETHINTFC_und_b = 5, + ETHINTFC_und_m = 0x00000020, + ETHINTFC_iom_b = 6, + ETHINTFC_iom_m = 0x000000c0, + + ETHFIFOTT_tth_b = 0, + ETHFIFOTT_tth_m = 0x0000007f, + + ETHARC_pro_b = 0, + ETHARC_pro_m = 0x00000001, + ETHARC_am_b = 1, + ETHARC_am_m = 0x00000002, + ETHARC_afm_b = 2, + ETHARC_afm_m = 0x00000004, + ETHARC_ab_b = 3, + ETHARC_ab_m = 0x00000008, + + ETHSAL_byte5_b = 0, + ETHSAL_byte5_m = 0x000000ff, + ETHSAL_byte4_b = 8, + ETHSAL_byte4_m = 0x0000ff00, + ETHSAL_byte3_b = 16, + ETHSAL_byte3_m = 0x00ff0000, + ETHSAL_byte2_b = 24, + ETHSAL_byte2_m = 0xff000000, + + ETHSAH_byte1_b = 0, + ETHSAH_byte1_m = 0x000000ff, + ETHSAH_byte0_b = 8, + ETHSAH_byte0_m = 0x0000ff00, + + ETHGPF_ptv_b = 0, + ETHGPF_ptv_m = 0x0000ffff, + + ETHPFS_pfd_b = 0, + ETHPFS_pfd_m = 0x00000001, + + ETHCFSA0_cfsa4_b = 0, + ETHCFSA0_cfsa4_m = 0x000000ff, + ETHCFSA0_cfsa5_b = 8, + ETHCFSA0_cfsa5_m = 0x0000ff00, + + ETHCFSA1_cfsa2_b = 0, + ETHCFSA1_cfsa2_m = 0x000000ff, + ETHCFSA1_cfsa3_b = 8, + ETHCFSA1_cfsa3_m = 0x0000ff00, + + ETHCFSA2_cfsa0_b = 0, + ETHCFSA2_cfsa0_m = 0x000000ff, + ETHCFSA2_cfsa1_b = 8, + ETHCFSA2_cfsa1_m = 0x0000ff00, + + ETHMAC1_re_b = 0, + ETHMAC1_re_m = 0x00000001, + ETHMAC1_paf_b = 1, + ETHMAC1_paf_m = 0x00000002, + ETHMAC1_rfc_b = 2, + ETHMAC1_rfc_m = 0x00000004, + ETHMAC1_tfc_b = 3, + ETHMAC1_tfc_m = 0x00000008, + ETHMAC1_lb_b = 4, + ETHMAC1_lb_m = 0x00000010, + ETHMAC1_mr_b = 31, + ETHMAC1_mr_m = 0x80000000, + + ETHMAC2_fd_b = 0, + ETHMAC2_fd_m = 0x00000001, + ETHMAC2_flc_b = 1, + ETHMAC2_flc_m = 0x00000002, + ETHMAC2_hfe_b = 2, + ETHMAC2_hfe_m = 0x00000004, + ETHMAC2_dc_b = 3, + ETHMAC2_dc_m = 0x00000008, + ETHMAC2_cen_b = 4, + ETHMAC2_cen_m = 0x00000010, + ETHMAC2_pe_b = 5, + ETHMAC2_pe_m = 0x00000020, + ETHMAC2_vpe_b = 6, + ETHMAC2_vpe_m = 0x00000040, + ETHMAC2_ape_b = 7, + ETHMAC2_ape_m = 0x00000080, + ETHMAC2_ppe_b = 8, + ETHMAC2_ppe_m = 0x00000100, + ETHMAC2_lpe_b = 9, + ETHMAC2_lpe_m = 0x00000200, + ETHMAC2_nb_b = 12, + ETHMAC2_nb_m = 0x00001000, + ETHMAC2_bp_b = 13, + ETHMAC2_bp_m = 0x00002000, + ETHMAC2_ed_b = 14, + ETHMAC2_ed_m = 0x00004000, + + ETHIPGT_ipgt_b = 0, + ETHIPGT_ipgt_m = 0x0000007f, + + ETHIPGR_ipgr2_b = 0, + ETHIPGR_ipgr2_m = 0x0000007f, + ETHIPGR_ipgr1_b = 8, + ETHIPGR_ipgr1_m = 0x00007f00, + + ETHCLRT_maxret_b = 0, + ETHCLRT_maxret_m = 0x0000000f, + ETHCLRT_colwin_b = 8, + ETHCLRT_colwin_m = 0x00003f00, + + ETHMAXF_maxf_b = 0, + ETHMAXF_maxf_m = 0x0000ffff, + + ETHMTEST_tb_b = 2, + ETHMTEST_tb_m = 0x00000004, + + ETHMCP_div_b = 0, + ETHMCP_div_m = 0x000000ff, + + MIIMCFG_rsv_b = 0, + MIIMCFG_rsv_m = 0x0000000c, + + MIIMCMD_rd_b = 0, + MIIMCMD_rd_m = 0x00000001, + MIIMCMD_scn_b = 1, + MIIMCMD_scn_m = 0x00000002, + + MIIMADDR_regaddr_b = 0, + MIIMADDR_regaddr_m = 0x0000001f, + MIIMADDR_phyaddr_b = 8, + MIIMADDR_phyaddr_m = 0x00001f00, + + MIIMWTD_wdata_b = 0, + MIIMWTD_wdata_m = 0x0000ffff, + + MIIMRDD_rdata_b = 0, + MIIMRDD_rdata_m = 0x0000ffff, + + MIIMIND_bsy_b = 0, + MIIMIND_bsy_m = 0x00000001, + MIIMIND_scn_b = 1, + MIIMIND_scn_m = 0x00000002, + MIIMIND_nv_b = 2, + MIIMIND_nv_m = 0x00000004, + +} ; + +/* + * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors. + */ +enum +{ + ETHRX_fd_b = 0, + ETHRX_fd_m = 0x00000001, + ETHRX_ld_b = 1, + ETHRX_ld_m = 0x00000002, + ETHRX_rok_b = 2, + ETHRX_rok_m = 0x00000004, + ETHRX_fm_b = 3, + ETHRX_fm_m = 0x00000008, + ETHRX_mp_b = 4, + ETHRX_mp_m = 0x00000010, + ETHRX_bp_b = 5, + ETHRX_bp_m = 0x00000020, + ETHRX_vlt_b = 6, + ETHRX_vlt_m = 0x00000040, + ETHRX_cf_b = 7, + ETHRX_cf_m = 0x00000080, + ETHRX_ovr_b = 8, + ETHRX_ovr_m = 0x00000100, + ETHRX_crc_b = 9, + ETHRX_crc_m = 0x00000200, + ETHRX_cv_b = 10, + ETHRX_cv_m = 0x00000400, + ETHRX_db_b = 11, + ETHRX_db_m = 0x00000800, + ETHRX_le_b = 12, + ETHRX_le_m = 0x00001000, + ETHRX_lor_b = 13, + ETHRX_lor_m = 0x00002000, + ETHRX_ces_b = 14, + ETHRX_ces_m = 0x00004000, + ETHRX_length_b = 16, + ETHRX_length_m = 0xffff0000, + + ETHTX_fd_b = 0, + ETHTX_fd_m = 0x00000001, + ETHTX_ld_b = 1, + ETHTX_ld_m = 0x00000002, + ETHTX_oen_b = 2, + ETHTX_oen_m = 0x00000004, + ETHTX_pen_b = 3, + ETHTX_pen_m = 0x00000008, + ETHTX_cen_b = 4, + ETHTX_cen_m = 0x00000010, + ETHTX_hen_b = 5, + ETHTX_hen_m = 0x00000020, + ETHTX_tok_b = 6, + ETHTX_tok_m = 0x00000040, + ETHTX_mp_b = 7, + ETHTX_mp_m = 0x00000080, + ETHTX_bp_b = 8, + ETHTX_bp_m = 0x00000100, + ETHTX_und_b = 9, + ETHTX_und_m = 0x00000200, + ETHTX_of_b = 10, + ETHTX_of_m = 0x00000400, + ETHTX_ed_b = 11, + ETHTX_ed_m = 0x00000800, + ETHTX_ec_b = 12, + ETHTX_ec_m = 0x00001000, + ETHTX_lc_b = 13, + ETHTX_lc_m = 0x00002000, + ETHTX_td_b = 14, + ETHTX_td_m = 0x00004000, + ETHTX_crc_b = 15, + ETHTX_crc_m = 0x00008000, + ETHTX_le_b = 16, + ETHTX_le_m = 0x00010000, + ETHTX_cc_b = 17, + ETHTX_cc_m = 0x001E0000, +} ; + +#endif // __IDT_ETH_H__ + + + + diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth_v.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth_v.h new file mode 100644 index 0000000000..3ea03c6725 --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/eth_v.h @@ -0,0 +1,63 @@ +#ifndef __IDT_ETH_V_H__ +#define __IDT_ETH_V_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * Ethernet register definition. + * + * File : $Id: eth.h,v 1.3 2002/06/06 18:34:04 astichte Exp $ + * + * Author : Allen.Stichter@idt.com + * Date : 20020605 + * Update : + * $Log: eth.h,v $ + * Revision 1.3 2002/06/06 18:34:04 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.2 2002/06/05 18:19:46 astichte + * Added + * + * Revision 1.1 2002/05/29 17:33:22 sysarch + * jba File moved from vcode/include/idt/acacia + * + ******************************************************************************/ + +#include + +#define IS_TX_TOK(X) (((X) & (1<> ETHTX_tok_b ) /* Transmit Okay */ +#define IS_TX_MP(X) (((X) & (1<> ETHTX_mp_b ) /* Multicast */ +#define IS_TX_BP(X) (((X) & (1<> ETHTX_bp_b ) /* Broadcast */ +#define IS_TX_UND_ERR(X) (((X) & (1<> ETHTX_und_b ) /* Transmit FIFO Underflow */ +#define IS_TX_OF_ERR(X) (((X) & (1<> ETHTX_of_b ) /* Oversized frame */ +#define IS_TX_ED_ERR(X) (((X) & (1<> ETHTX_ed_b ) /* Excessive deferral */ +#define IS_TX_EC_ERR(X) (((X) & (1<> ETHTX_ec_b) /* Excessive collisions */ +#define IS_TX_LC_ERR(X) (((X) & (1<> ETHTX_lc_b ) /* Late Collision */ +#define IS_TX_TD_ERR(X) (((X) & (1<> ETHTX_td_b ) /* Transmit deferred*/ +#define IS_TX_CRC_ERR(X) (((X) & (1<> ETHTX_crc_b ) /* CRC Error */ +#define IS_TX_LE_ERR(X) (((X) & (1<> ETHTX_le_b ) /* Length Error */ + +#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b) /* Collision Count */ + +#define IS_RCV_ROK(X) (((X) & (1<> ETHRX_rok_b) /* Receive Okay */ +#define IS_RCV_FM(X) (((X) & (1<> ETHRX_fm_b) /* Is Filter Match */ +#define IS_RCV_MP(X) (((X) & (1<> ETHRX_mp_b) /* Is it MP */ +#define IS_RCV_BP(X) (((X) & (1<> ETHRX_bp_b) /* Is it BP */ +#define IS_RCV_VLT(X) (((X) & (1<> ETHRX_vlt_b) /* VLAN Tag Detect */ +#define IS_RCV_CF(X) (((X) & (1<> ETHRX_cf_b) /* Control Frame */ +#define IS_RCV_OVR_ERR(X) (((X) & (1<> ETHRX_ovr_b) /* Receive Overflow */ +#define IS_RCV_CRC_ERR(X) (((X) & (1<> ETHRX_crc_b) /* CRC Error */ +#define IS_RCV_CV_ERR(X) (((X) & (1<> ETHRX_cv_b) /* Code Violation */ +#define IS_RCV_DB_ERR(X) (((X) & (1<> ETHRX_db_b) /* Dribble Bits */ +#define IS_RCV_LE_ERR(X) (((X) & (1<> ETHRX_le_b) /* Length error */ +#define IS_RCV_LOR_ERR(X) (((X) & (1<> ETHRX_lor_b) /* Length Out of Range */ +#define IS_RCV_CES_ERR(X) (((X) & (1<> ETHRX_ces_b) /* Preamble error */ +#define RCVPKT_LENGTH(X) (((X) & ETHRX_length_m) >> ETHRX_length_b) /* Length of the received packet */ +#endif // __IDT_ETH_V_H__ + + + + + diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/gpio.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/gpio.h new file mode 100644 index 0000000000..1638cfeacc --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/gpio.h @@ -0,0 +1,181 @@ +#ifndef __IDT_GPIO_H__ +#define __IDT_GPIO_H__ + +/******************************************************************************* + * + * Copyright 2002 Integrated Device Technology, Inc. + * All rights reserved. + * + * GPIO register definition. + * + * File : $Id: gpio.h,v 1.2 2002/06/06 18:34:04 astichte Exp $ + * + * Author : ryan.holmQVist@idt.com + * Date : 20011005 + * Update : + * $Log: gpio.h,v $ + * Revision 1.2 2002/06/06 18:34:04 astichte + * Added XXX_PhysicalAddress and XXX_VirtualAddress + * + * Revision 1.1 2002/05/29 17:33:22 sysarch + * jba File moved from vcode/include/idt/acacia + * + * + ******************************************************************************/ + +enum +{ + GPIO0_PhysicalAddress = 0x18050000, + GPIO_PhysicalAddress = GPIO0_PhysicalAddress, // Default + + GPIO0_VirtualAddress = 0xb8050000, + GPIO_VirtualAddress = GPIO0_VirtualAddress, // Default +} ; + +typedef struct +{ + u32 gpiofunc; /* GPIO Function Register + * gpiofunc[x]==0 bit = gpio + * func[x]==1 bit = altfunc + */ + u32 gpiocfg; /* GPIO Configuration Register + * gpiocfg[x]==0 bit = input + * gpiocfg[x]==1 bit = output + */ + u32 gpiod; /* GPIO Data Register + * gpiod[x] read/write gpio pinX status + */ + u32 gpioilevel; /* GPIO Interrupt Status Register + * interrupt level (see gpioistat) + */ + u32 gpioistat; /* Gpio Interrupt Status Register + * istat[x] = (gpiod[x] == level[x]) + * cleared in ISR (STICKY bits) + */ + u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */ +} volatile * GPIO_t ; + +typedef enum +{ + GPIO_gpio_v = 0, // gpiofunc use pin as GPIO. + GPIO_alt_v = 1, // gpiofunc use pin as alt. + GPIO_input_v = 0, // gpiocfg use pin as input. + GPIO_output_v = 1, // gpiocfg use pin as output. + GPIO_pin0_b = 0, + GPIO_pin0_m = 0x00000001, + GPIO_pin1_b = 1, + GPIO_pin1_m = 0x00000002, + GPIO_pin2_b = 2, + GPIO_pin2_m = 0x00000004, + GPIO_pin3_b = 3, + GPIO_pin3_m = 0x00000008, + GPIO_pin4_b = 4, + GPIO_pin4_m = 0x00000010, + GPIO_pin5_b = 5, + GPIO_pin5_m = 0x00000020, + GPIO_pin6_b = 6, + GPIO_pin6_m = 0x00000040, + GPIO_pin7_b = 7, + GPIO_pin7_m = 0x00000080, + GPIO_pin8_b = 8, + GPIO_pin8_m = 0x00000100, + GPIO_pin9_b = 9, + GPIO_pin9_m = 0x00000200, + GPIO_pin10_b = 10, + GPIO_pin10_m = 0x00000400, + GPIO_pin11_b = 11, + GPIO_pin11_m = 0x00000800, + GPIO_pin12_b = 12, + GPIO_pin12_m = 0x00001000, + GPIO_pin13_b = 13, + GPIO_pin13_m = 0x00002000, + GPIO_pin14_b = 14, + GPIO_pin14_m = 0x00004000, + GPIO_pin15_b = 15, + GPIO_pin15_m = 0x00008000, + GPIO_pin16_b = 16, + GPIO_pin16_m = 0x00010000, + GPIO_pin17_b = 17, + GPIO_pin17_m = 0x00020000, + GPIO_pin18_b = 18, + GPIO_pin18_m = 0x00040000, + GPIO_pin19_b = 19, + GPIO_pin19_m = 0x00080000, + GPIO_pin20_b = 20, + GPIO_pin20_m = 0x00100000, + GPIO_pin21_b = 21, + GPIO_pin21_m = 0x00200000, + GPIO_pin22_b = 22, + GPIO_pin22_m = 0x00400000, + GPIO_pin23_b = 23, + GPIO_pin23_m = 0x00800000, + GPIO_pin24_b = 24, + GPIO_pin24_m = 0x01000000, + GPIO_pin25_b = 25, + GPIO_pin25_m = 0x02000000, + GPIO_pin26_b = 26, + GPIO_pin26_m = 0x04000000, + GPIO_pin27_b = 27, + GPIO_pin27_m = 0x08000000, + GPIO_pin28_b = 28, + GPIO_pin28_m = 0x10000000, + GPIO_pin29_b = 29, + GPIO_pin29_m = 0x20000000, + GPIO_pin30_b = 30, + GPIO_pin30_m = 0x40000000, + GPIO_pin31_b = 31, + GPIO_pin31_m = 0x80000000, + +// Alternate function pins. Corrsponding gpiofunc bit set to GPIO_alt_v. + + GPIO_u0sout_b = GPIO_pin0_b, // UART 0 serial out. + GPIO_u0sout_m = GPIO_pin0_m, + GPIO_u0sout_cfg_v = GPIO_output_v, + GPIO_u0sinp_b = GPIO_pin1_b, // UART 0 serial in. + GPIO_u0sinp_m = GPIO_pin1_m, + GPIO_u0sinp_cfg_v = GPIO_input_v, + GPIO_u0rtsn_b = GPIO_pin2_b, // UART 0 req. to send. + GPIO_u0rtsn_m = GPIO_pin2_m, + GPIO_u0rtsn_cfg_v = GPIO_output_v, + GPIO_u0ctsn_b = GPIO_pin3_b, // UART 0 clear to send. + GPIO_u0ctsn_m = GPIO_pin3_m, + GPIO_u0ctsn_cfg_v = GPIO_input_v, + GPIO_maddr22_b = GPIO_pin4_b, // M&P bus bit 22. + GPIO_maddr22_m = GPIO_pin4_m, + GPIO_maddr22_cfg_v = GPIO_output_v, + + GPIO_maddr23_b = GPIO_pin5_b, // M&P bus bit 23. + GPIO_maddr23_m = GPIO_pin5_m, + GPIO_maddr23_cfg_v = GPIO_output_v, + + GPIO_maddr24_b = GPIO_pin6_b, // M&P bus bit 24. + GPIO_maddr24_m = GPIO_pin6_m, + GPIO_maddr24_cfg_v = GPIO_output_v, + + GPIO_maddr25_b = GPIO_pin7_b, // M&P bus bit 25. + GPIO_maddr25_m = GPIO_pin7_m, + GPIO_maddr25_cfg_v = GPIO_output_v, + + GPIO_cpu_b = GPIO_pin8_b, // M&P bus bit 25. + GPIO_cpu_m = GPIO_pin8_m, + GPIO_cpu_cfg_v = GPIO_output_v, + GPIO_afspare6_b = GPIO_pin9_b, // reserved. + GPIO_afspare6_m = GPIO_pin9_m, + GPIO_afspare6_cfg_v = GPIO_input_v, + GPIO_afspare4_b = GPIO_pin10_b, // reserved. + GPIO_afspare4_m = GPIO_pin10_m, + GPIO_afspare4_cfg_v = GPIO_input_v, + GPIO_afspare3_b = GPIO_pin11_b, // reserved. + GPIO_afspare3_m = GPIO_pin11_m, + GPIO_afspare3_cfg_v = GPIO_input_v, + GPIO_afspare2_b = GPIO_pin12_b, // reserved. + GPIO_afspare2_m = GPIO_pin12_m, + GPIO_afspare2_cfg_v = GPIO_input_v, + GPIO_pcimuintn_b = GPIO_pin13_b, // PCI messaging int. + GPIO_pcimuintn_m = GPIO_pin13_m, + GPIO_pcimuintn_cfg_v = GPIO_output_v, + +} GPIO_DEFS_t; + +#endif // __IDT_GPIO_H__ + diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/irq.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/irq.h new file mode 100644 index 0000000000..2fd60e7f9d --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/irq.h @@ -0,0 +1,8 @@ +#ifndef __ASM_MACH_MIPS_IRQ_H +#define __ASM_MACH_MIPS_IRQ_H + +#include + +#define NR_IRQS 256 + +#endif /* __ASM_MACH_MIPS_IRQ_H */ diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/pci.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/pci.h new file mode 100644 index 0000000000..585a0ae21b --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/pci.h @@ -0,0 +1,692 @@ +/************************************************************************** + * + * BRIEF MODULE DESCRIPTION + * PCI register definitio + * + * Copyright 2004 IDT Inc. (rischelp@idt.com) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + * + * + ************************************************************************** + * May 2004 rkt, neb. + * + * Initial Release + * + * + * + ************************************************************************** + */ + +#ifndef __IDT_PCI_H__ +#define __IDT_PCI_H__ + +enum +{ + PCI0_PhysicalAddress = 0x18080000, + PCI_PhysicalAddress = PCI0_PhysicalAddress, + + PCI0_VirtualAddress = 0xB8080000, + PCI_VirtualAddress = PCI0_VirtualAddress, +} ; + +enum +{ + PCI_LbaCount = 4, // Local base addresses. +} ; + +typedef struct +{ + u32 a ; // Address. + u32 c ; // Control. + u32 m ; // mapping. +} PCI_Map_s ; + +typedef struct +{ + u32 pcic ; + u32 pcis ; + u32 pcism ; + u32 pcicfga ; + u32 pcicfgd ; + PCI_Map_s pcilba [PCI_LbaCount] ; + u32 pcidac ; + u32 pcidas ; + u32 pcidasm ; + u32 pcidad ; + u32 pcidma8c ; + u32 pcidma9c ; + u32 pcitc ; +} volatile *PCI_t ; + +// PCI messaging unit. +enum +{ + PCIM_Count = 2, +} ; +typedef struct +{ + u32 pciim [PCIM_Count] ; + u32 pciom [PCIM_Count] ; + u32 pciid ; + u32 pciiic ; + u32 pciiim ; + u32 pciiod ; + u32 pciioic ; + u32 pciioim ; +} volatile *PCIM_t ; + +/******************************************************************************* + * + * PCI Control Register + * + ******************************************************************************/ +enum +{ + PCIC_en_b = 0, + PCIC_en_m = 0x00000001, + PCIC_tnr_b = 1, + PCIC_tnr_m = 0x00000002, + PCIC_sce_b = 2, + PCIC_sce_m = 0x00000004, + PCIC_ien_b = 3, + PCIC_ien_m = 0x00000008, + PCIC_aaa_b = 4, + PCIC_aaa_m = 0x00000010, + PCIC_eap_b = 5, + PCIC_eap_m = 0x00000020, + PCIC_pcim_b = 6, + PCIC_pcim_m = 0x000001c0, + PCIC_pcim_disabled_v = 0, + PCIC_pcim_tnr_v = 1, // Satellite - target not ready + PCIC_pcim_suspend_v = 2, // Satellite - suspended CPU. + PCIC_pcim_extern_v = 3, // Host - external arbiter. + PCIC_pcim_fixed_v = 4, // Host - fixed priority arb. + PCIC_pcim_roundrobin_v = 5, // Host - round robin priority. + PCIC_pcim_reserved6_v = 6, + PCIC_pcim_reserved7_v = 7, + PCIC_igm_b = 9, + PCIC_igm_m = 0x00000200, +} ; + +/******************************************************************************* + * + * PCI Status Register + * + ******************************************************************************/ +enum { + PCIS_eed_b = 0, + PCIS_eed_m = 0x00000001, + PCIS_wr_b = 1, + PCIS_wr_m = 0x00000002, + PCIS_nmi_b = 2, + PCIS_nmi_m = 0x00000004, + PCIS_ii_b = 3, + PCIS_ii_m = 0x00000008, + PCIS_cwe_b = 4, + PCIS_cwe_m = 0x00000010, + PCIS_cre_b = 5, + PCIS_cre_m = 0x00000020, + PCIS_mdpe_b = 6, + PCIS_mdpe_m = 0x00000040, + PCIS_sta_b = 7, + PCIS_sta_m = 0x00000080, + PCIS_rta_b = 8, + PCIS_rta_m = 0x00000100, + PCIS_rma_b = 9, + PCIS_rma_m = 0x00000200, + PCIS_sse_b = 10, + PCIS_sse_m = 0x00000400, + PCIS_ose_b = 11, + PCIS_ose_m = 0x00000800, + PCIS_pe_b = 12, + PCIS_pe_m = 0x00001000, + PCIS_tae_b = 13, + PCIS_tae_m = 0x00002000, + PCIS_rle_b = 14, + PCIS_rle_m = 0x00004000, + PCIS_bme_b = 15, + PCIS_bme_m = 0x00008000, + PCIS_prd_b = 16, + PCIS_prd_m = 0x00010000, + PCIS_rip_b = 17, + PCIS_rip_m = 0x00020000, +} ; + +/******************************************************************************* + * + * PCI Status Mask Register + * + ******************************************************************************/ +enum { + PCISM_eed_b = 0, + PCISM_eed_m = 0x00000001, + PCISM_wr_b = 1, + PCISM_wr_m = 0x00000002, + PCISM_nmi_b = 2, + PCISM_nmi_m = 0x00000004, + PCISM_ii_b = 3, + PCISM_ii_m = 0x00000008, + PCISM_cwe_b = 4, + PCISM_cwe_m = 0x00000010, + PCISM_cre_b = 5, + PCISM_cre_m = 0x00000020, + PCISM_mdpe_b = 6, + PCISM_mdpe_m = 0x00000040, + PCISM_sta_b = 7, + PCISM_sta_m = 0x00000080, + PCISM_rta_b = 8, + PCISM_rta_m = 0x00000100, + PCISM_rma_b = 9, + PCISM_rma_m = 0x00000200, + PCISM_sse_b = 10, + PCISM_sse_m = 0x00000400, + PCISM_ose_b = 11, + PCISM_ose_m = 0x00000800, + PCISM_pe_b = 12, + PCISM_pe_m = 0x00001000, + PCISM_tae_b = 13, + PCISM_tae_m = 0x00002000, + PCISM_rle_b = 14, + PCISM_rle_m = 0x00004000, + PCISM_bme_b = 15, + PCISM_bme_m = 0x00008000, + PCISM_prd_b = 16, + PCISM_prd_m = 0x00010000, + PCISM_rip_b = 17, + PCISM_rip_m = 0x00020000, +} ; + +/******************************************************************************* + * + * PCI Configuration Address Register + * + ******************************************************************************/ +enum { + PCICFGA_reg_b = 2, + PCICFGA_reg_m = 0x000000fc, + PCICFGA_reg_id_v = 0x00>>2, //use PCFGID_ + PCICFGA_reg_04_v = 0x04>>2, //use PCFG04_ + PCICFGA_reg_08_v = 0x08>>2, //use PCFG08_ + PCICFGA_reg_0C_v = 0x0C>>2, //use PCFG0C_ + PCICFGA_reg_pba0_v = 0x10>>2, //use PCIPBA_ + PCICFGA_reg_pba1_v = 0x14>>2, //use PCIPBA_ + PCICFGA_reg_pba2_v = 0x18>>2, //use PCIPBA_ + PCICFGA_reg_pba3_v = 0x1c>>2, //use PCIPBA_ + PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_ + PCICFGA_reg_3C_v = 0x3C>>2, //use PCFG3C_ + PCICFGA_reg_pba0c_v = 0x44>>2, //use PCIPBAC_ + PCICFGA_reg_pba0m_v = 0x48>>2, + PCICFGA_reg_pba1c_v = 0x4c>>2, //use PCIPBAC_ + PCICFGA_reg_pba1m_v = 0x50>>2, + PCICFGA_reg_pba2c_v = 0x54>>2, //use PCIPBAC_ + PCICFGA_reg_pba2m_v = 0x58>>2, + PCICFGA_reg_pba3c_v = 0x5c>>2, //use PCIPBAC_ + PCICFGA_reg_pba3m_v = 0x60>>2, + PCICFGA_reg_pmgt_v = 0x64>>2, + PCICFGA_func_b = 8, + PCICFGA_func_m = 0x00000700, + PCICFGA_dev_b = 11, + PCICFGA_dev_m = 0x0000f800, + PCICFGA_dev_internal_v = 0, + PCICFGA_bus_b = 16, + PCICFGA_bus_m = 0x00ff0000, + PCICFGA_bus_type0_v = 0, //local bus + PCICFGA_en_b = 31, // read only + PCICFGA_en_m = 0x80000000, +} ; + +enum { + PCFGID_vendor_b = 0, + PCFGID_vendor_m = 0x0000ffff, + PCFGID_vendor_IDT_v = 0x111d, + PCFGID_device_b = 16, + PCFGID_device_m = 0xffff0000, + PCFGID_device_Korinade_v = 0x0214, + + PCFG04_command_ioena_b = 1, + PCFG04_command_ioena_m = 0x00000001, + PCFG04_command_memena_b = 2, + PCFG04_command_memena_m = 0x00000002, + PCFG04_command_bmena_b = 3, + PCFG04_command_bmena_m = 0x00000004, + PCFG04_command_mwinv_b = 5, + PCFG04_command_mwinv_m = 0x00000010, + PCFG04_command_parena_b = 7, + PCFG04_command_parena_m = 0x00000040, + PCFG04_command_serrena_b = 9, + PCFG04_command_serrena_m = 0x00000100, + PCFG04_command_fastbbena_b = 10, + PCFG04_command_fastbbena_m = 0x00000200, + PCFG04_status_b = 16, + PCFG04_status_m = 0xffff0000, + PCFG04_status_66MHz_b = 21, // 66 MHz enable + PCFG04_status_66MHz_m = 0x00200000, + PCFG04_status_fbb_b = 23, + PCFG04_status_fbb_m = 0x00800000, + PCFG04_status_mdpe_b = 24, + PCFG04_status_mdpe_m = 0x01000000, + PCFG04_status_dst_b = 25, + PCFG04_status_dst_m = 0x06000000, + PCFG04_status_sta_b = 27, + PCFG04_status_sta_m = 0x08000000, + PCFG04_status_rta_b = 28, + PCFG04_status_rta_m = 0x10000000, + PCFG04_status_rma_b = 29, + PCFG04_status_rma_m = 0x20000000, + PCFG04_status_sse_b = 30, + PCFG04_status_sse_m = 0x40000000, + PCFG04_status_pe_b = 31, + PCFG04_status_pe_m = 0x40000000, + + PCFG08_revId_b = 0, + PCFG08_revId_m = 0x000000ff, + PCFG08_classCode_b = 0, + PCFG08_classCode_m = 0xffffff00, + PCFG08_classCode_bridge_v = 06, + PCFG08_classCode_proc_v = 0x0b3000, // processor-MIPS + PCFG0C_cacheline_b = 0, + PCFG0C_cacheline_m = 0x000000ff, + PCFG0C_masterLatency_b = 8, + PCFG0C_masterLatency_m = 0x0000ff00, + PCFG0C_headerType_b = 16, + PCFG0C_headerType_m = 0x00ff0000, + PCFG0C_bist_b = 24, + PCFG0C_bist_m = 0xff000000, + + PCIPBA_msi_b = 0, + PCIPBA_msi_m = 0x00000001, + PCIPBA_p_b = 3, + PCIPBA_p_m = 0x00000004, + PCIPBA_baddr_b = 8, + PCIPBA_baddr_m = 0xffffff00, + + PCFGSS_vendorId_b = 0, + PCFGSS_vendorId_m = 0x0000ffff, + PCFGSS_id_b = 16, + PCFGSS_id_m = 0xffff0000, + + PCFG3C_interruptLine_b = 0, + PCFG3C_interruptLine_m = 0x000000ff, + PCFG3C_interruptPin_b = 8, + PCFG3C_interruptPin_m = 0x0000ff00, + PCFG3C_minGrant_b = 16, + PCFG3C_minGrant_m = 0x00ff0000, + PCFG3C_maxLat_b = 24, + PCFG3C_maxLat_m = 0xff000000, + + PCIPBAC_msi_b = 0, + PCIPBAC_msi_m = 0x00000001, + PCIPBAC_p_b = 1, + PCIPBAC_p_m = 0x00000002, + PCIPBAC_size_b = 2, + PCIPBAC_size_m = 0x0000007c, + PCIPBAC_sb_b = 7, + PCIPBAC_sb_m = 0x00000080, + PCIPBAC_pp_b = 8, + PCIPBAC_pp_m = 0x00000100, + PCIPBAC_mr_b = 9, + PCIPBAC_mr_m = 0x00000600, + PCIPBAC_mr_read_v =0, //no prefetching + PCIPBAC_mr_readLine_v =1, + PCIPBAC_mr_readMult_v =2, + PCIPBAC_mrl_b = 11, + PCIPBAC_mrl_m = 0x00000800, + PCIPBAC_mrm_b = 12, + PCIPBAC_mrm_m = 0x00001000, + PCIPBAC_trp_b = 13, + PCIPBAC_trp_m = 0x00002000, + + PCFG40_trdyTimeout_b = 0, + PCFG40_trdyTimeout_m = 0x000000ff, + PCFG40_retryLim_b = 8, + PCFG40_retryLim_m = 0x0000ff00, +}; + +/******************************************************************************* + * + * PCI Local Base Address [0|1|2|3] Register + * + ******************************************************************************/ +enum { + PCILBA_baddr_b = 0, // In PCI_t -> pcilba [] .a + PCILBA_baddr_m = 0xffffff00, +} ; +/******************************************************************************* + * + * PCI Local Base Address Control Register + * + ******************************************************************************/ +enum { + PCILBAC_msi_b = 0, // In pPci->pcilba[i].c + PCILBAC_msi_m = 0x00000001, + PCILBAC_msi_mem_v = 0, + PCILBAC_msi_io_v = 1, + PCILBAC_size_b = 2, // In pPci->pcilba[i].c + PCILBAC_size_m = 0x0000007c, + PCILBAC_sb_b = 7, // In pPci->pcilba[i].c + PCILBAC_sb_m = 0x00000080, + PCILBAC_rt_b = 8, // In pPci->pcilba[i].c + PCILBAC_rt_m = 0x00000100, + PCILBAC_rt_noprefetch_v = 0, // mem read + PCILBAC_rt_prefetch_v = 1, // mem readline +} ; + +/******************************************************************************* + * + * PCI Local Base Address [0|1|2|3] Mapping Register + * + ******************************************************************************/ +enum { + PCILBAM_maddr_b = 8, + PCILBAM_maddr_m = 0xffffff00, +} ; + +/******************************************************************************* + * + * PCI Decoupled Access Control Register + * + ******************************************************************************/ +enum { + PCIDAC_den_b = 0, + PCIDAC_den_m = 0x00000001, +} ; + +/******************************************************************************* + * + * PCI Decoupled Access Status Register + * + ******************************************************************************/ +enum { + PCIDAS_d_b = 0, + PCIDAS_d_m = 0x00000001, + PCIDAS_b_b = 1, + PCIDAS_b_m = 0x00000002, + PCIDAS_e_b = 2, + PCIDAS_e_m = 0x00000004, + PCIDAS_ofe_b = 3, + PCIDAS_ofe_m = 0x00000008, + PCIDAS_off_b = 4, + PCIDAS_off_m = 0x00000010, + PCIDAS_ife_b = 5, + PCIDAS_ife_m = 0x00000020, + PCIDAS_iff_b = 6, + PCIDAS_iff_m = 0x00000040, +} ; + +/******************************************************************************* + * + * PCI DMA Channel 8 Configuration Register + * + ******************************************************************************/ +enum +{ + PCIDMA8C_mbs_b = 0, // Maximum Burst Size. + PCIDMA8C_mbs_m = 0x00000fff, // { pcidma8c } + PCIDMA8C_our_b = 12, // Optimize Unaligned Burst Reads. + PCIDMA8C_our_m = 0x00001000, // { pcidma8c } +} ; + +/******************************************************************************* + * + * PCI DMA Channel 9 Configuration Register + * + ******************************************************************************/ +enum +{ + PCIDMA9C_mbs_b = 0, // Maximum Burst Size. + PCIDMA9C_mbs_m = 0x00000fff, // { pcidma9c } +} ; + +/******************************************************************************* + * + * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors + * + ******************************************************************************/ +enum { + PCIDMAD_pt_b = 22, // in DEVCMD field (descriptor) + PCIDMAD_pt_m = 0x00c00000, // preferred transaction field + // These are for reads (DMA channel 8) + PCIDMAD_devcmd_mr_v = 0, //memory read + PCIDMAD_devcmd_mrl_v = 1, //memory read line + PCIDMAD_devcmd_mrm_v = 2, //memory read multiple + PCIDMAD_devcmd_ior_v = 3, //I/O read + // These are for writes (DMA channel 9) + PCIDMAD_devcmd_mw_v = 0, //memory write + PCIDMAD_devcmd_mwi_v = 1, //memory write invalidate + PCIDMAD_devcmd_iow_v = 3, //I/O write + + // Swap byte field applies to both DMA channel 8 and 9 + PCIDMAD_sb_b = 24, // in DEVCMD field (descriptor) + PCIDMAD_sb_m = 0x01000000, // swap byte field +} ; + + +/******************************************************************************* + * + * PCI Target Control Register + * + ******************************************************************************/ +enum +{ + PCITC_rtimer_b = 0, // In PCITC_t -> pcitc + PCITC_rtimer_m = 0x000000ff, + PCITC_dtimer_b = 8, // In PCITC_t -> pcitc + PCITC_dtimer_m = 0x0000ff00, + PCITC_rdr_b = 18, // In PCITC_t -> pcitc + PCITC_rdr_m = 0x00040000, + PCITC_ddt_b = 19, // In PCITC_t -> pcitc + PCITC_ddt_m = 0x00080000, +} ; +/******************************************************************************* + * + * PCI messaging unit [applies to both inbound and outbound registers ] + * + ******************************************************************************/ +enum +{ + PCIM_m0_b = 0, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} + PCIM_m0_m = 0x00000001, // inbound or outbound message 0 + PCIM_m1_b = 1, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} + PCIM_m1_m = 0x00000002, // inbound or outbound message 1 + PCIM_db_b = 2, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} + PCIM_db_m = 0x00000004, // inbound or outbound doorbell +}; + + + + + + +#define PCI_MSG_VirtualAddress 0xB8088010 +#define rc32434_pci ((volatile PCI_t) PCI0_VirtualAddress) +#define rc32434_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress) + +#define PCIM_SHFT 0x6 +#define PCIM_BIT_LEN 0x7 +#define PCIM_H_EA 0x3 +#define PCIM_H_IA_FIX 0x4 +#define PCIM_H_IA_RR 0x5 + +#define PCI_ADDR_START 0x50000000 + +#define CPUTOPCI_MEM_WIN 0x02000000 +#define CPUTOPCI_IO_WIN 0x00100000 +#define PCILBA_SIZE_SHFT 2 +#define PCILBA_SIZE_MASK 0x1F +#define SIZE_256MB 0x1C +#define SIZE_128MB 0x1B +#define SIZE_64MB 0x1A +#define SIZE_32MB 0x19 +#define SIZE_16MB 0x18 +#define SIZE_4MB 0x16 +#define SIZE_2MB 0x15 +#define SIZE_1MB 0x14 +#define KORINA_CONFIG0_ADDR 0x80000000 +#define KORINA_CONFIG1_ADDR 0x80000004 +#define KORINA_CONFIG2_ADDR 0x80000008 +#define KORINA_CONFIG3_ADDR 0x8000000C +#define KORINA_CONFIG4_ADDR 0x80000010 +#define KORINA_CONFIG5_ADDR 0x80000014 +#define KORINA_CONFIG6_ADDR 0x80000018 +#define KORINA_CONFIG7_ADDR 0x8000001C +#define KORINA_CONFIG8_ADDR 0x80000020 +#define KORINA_CONFIG9_ADDR 0x80000024 +#define KORINA_CONFIG10_ADDR 0x80000028 +#define KORINA_CONFIG11_ADDR 0x8000002C +#define KORINA_CONFIG12_ADDR 0x80000030 +#define KORINA_CONFIG13_ADDR 0x80000034 +#define KORINA_CONFIG14_ADDR 0x80000038 +#define KORINA_CONFIG15_ADDR 0x8000003C +#define KORINA_CONFIG16_ADDR 0x80000040 +#define KORINA_CONFIG17_ADDR 0x80000044 +#define KORINA_CONFIG18_ADDR 0x80000048 +#define KORINA_CONFIG19_ADDR 0x8000004C +#define KORINA_CONFIG20_ADDR 0x80000050 +#define KORINA_CONFIG21_ADDR 0x80000054 +#define KORINA_CONFIG22_ADDR 0x80000058 +#define KORINA_CONFIG23_ADDR 0x8000005C +#define KORINA_CONFIG24_ADDR 0x80000060 +#define KORINA_CONFIG25_ADDR 0x80000064 +#define KORINA_CMD (PCFG04_command_ioena_m | \ + PCFG04_command_memena_m | \ + PCFG04_command_bmena_m | \ + PCFG04_command_mwinv_m | \ + PCFG04_command_parena_m | \ + PCFG04_command_serrena_m ) + +#define KORINA_STAT (PCFG04_status_mdpe_m | \ + PCFG04_status_sta_m | \ + PCFG04_status_rta_m | \ + PCFG04_status_rma_m | \ + PCFG04_status_sse_m | \ + PCFG04_status_pe_m) + +#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD) + +#define KORINA_REVID 0 +#define KORINA_CLASS_CODE 0 +#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \ + KORINA_REVID) + +#define KORINA_CACHE_LINE_SIZE 4 +#define KORINA_MASTER_LAT 0x3c +#define KORINA_HEADER_TYPE 0 +#define KORINA_BIST 0 + +#define KORINA_CNFG3 ((KORINA_BIST << 24) | \ + (KORINA_HEADER_TYPE<<16) | \ + (KORINA_MASTER_LAT<<8) | \ + KORINA_CACHE_LINE_SIZE ) + +#define KORINA_BAR0 0x00000008 /* 128 MB Memory */ +#define KORINA_BAR1 0x18800001 /* 1 MB IO */ +#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina + internal Registers */ +#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ + +#define KORINA_CNFG4 KORINA_BAR0 +#define KORINA_CNFG5 KORINA_BAR1 +#define KORINA_CNFG6 KORINA_BAR2 +#define KORINA_CNFG7 KORINA_BAR3 + +#define KORINA_SUBSYS_VENDOR_ID 0x011d +#define KORINA_SUBSYSTEM_ID 0x0214 +#define KORINA_CNFG8 0 +#define KORINA_CNFG9 0 +#define KORINA_CNFG10 0 +#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ + KORINA_SUBSYSTEM_ID) +#define KORINA_INT_LINE 1 +#define KORINA_INT_PIN 1 +#define KORINA_MIN_GNT 8 +#define KORINA_MAX_LAT 0x38 +#define KORINA_CNFG12 0 +#define KORINA_CNFG13 0 +#define KORINA_CNFG14 0 +#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ + (KORINA_MIN_GNT<<16) | \ + (KORINA_INT_PIN<<8) | \ + KORINA_INT_LINE) +#define KORINA_RETRY_LIMIT 0x80 +#define KORINA_TRDY_LIMIT 0x80 +#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ + KORINA_TRDY_LIMIT) +#define PCI_PBAxC_R 0x0 +#define PCI_PBAxC_RL 0x1 +#define PCI_PBAxC_RM 0x2 +#define SIZE_SHFT 2 + +#if defined(__MIPSEB__) +#define KORINA_PBA0C ( PCIPBAC_mrl_m | PCIPBAC_sb_m | \ + ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \ + PCIPBAC_pp_m | \ + (SIZE_128MB< + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef __MIPS_RB_H__ +#define __MIPS_RB_H__ +#include + +#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000)) +#define DEV0BASE 0x010000 +#define DEV0MASK 0x010004 +#define DEV0C 0x010008 +#define DEV0TC 0x01000C +#define DEV1BASE 0x010010 +#define DEV1MASK 0x010014 +#define DEV1C 0x010018 +#define DEV1TC 0x01001C +#define DEV2BASE 0x010020 +#define DEV2MASK 0x010024 +#define DEV2C 0x010028 +#define DEV2TC 0x01002C +#define DEV3BASE 0x010030 +#define DEV3MASK 0x010034 +#define DEV3C 0x010038 +#define DEV3TC 0x01003C +#define BTCS 0x010040 +#define BTCOMPARE 0x010044 +#define GPIOFUNC 0x050000 +#define GPIOCFG 0x050004 +#define GPIOD 0x050008 +#define GPIOILEVEL 0x05000C +#define GPIOISTAT 0x050010 +#define GPIONMIEN 0x050014 +#define IMASK6 0x038038 + +#define LO_WPX (1 << 0) +#define LO_ALE (1 << 1) +#define LO_CLE (1 << 2) +#define LO_CEX (1 << 3) +#define LO_FOFF (1 << 5) +#define LO_SPICS (1 << 6) +#define LO_ULED (1 << 7) + +typedef enum { + FUNC = 0x00, + CFG = 0x04, + DATA = 0x08, + ILEVEL = 0x0c, + ISTAT = 0x10, + NMIEN = 0x14 +} gpio_func; + +extern void changeLatchU5(unsigned char orMask, unsigned char nandMask); +extern unsigned get434Reg(unsigned regOffs); +extern void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val); +extern void gpio_set(gpio_func func, u32 mask, u32 value); +extern u32 gpio_get(gpio_func func); + +#define get434Reg(x) (*(volatile unsigned *) (IDT434_REG_BASE + (x))) + +struct korina_device { + char *name; + unsigned char mac[6]; + struct net_device *dev; +}; + +struct cf_device { + int gpio_pin; + void *dev; + struct gendisk *gd; +}; + +#endif diff --git a/target/linux/rb532-2.6/files/include/asm-mips/rc32434/rc32434.h b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/rc32434.h new file mode 100644 index 0000000000..848fc86b3a --- /dev/null +++ b/target/linux/rb532-2.6/files/include/asm-mips/rc32434/rc32434.h @@ -0,0 +1,122 @@ +/* + *************************************************************************** + * Definitions for IDT RC323434 CPU. + * + **************************************************************************** + * Kiran Rao + * + * Original form + **************************************************************************** + * P. Sadik Oct 08, 2003 + * + * Started revision history + * Made IDT_BUS_FREQ a kernel configuration parameter + **************************************************************************** + * P. Sadik Oct 10, 2003 + * + * Removed IDT_BUS_FREQ, since this parameter is no longer required. Instead + * idt_cpu_freq is used everywhere + **************************************************************************** + * P. Sadik Oct 20, 2003 + * + * Removed RC32434_BASE_BAUD + **************************************************************************** +*/ +#ifndef _RC32434_H_ +#define _RC32434_H_ + +#include +#include +#include + +#define RC32434_REG_BASE 0x18000000 + +#define interrupt ((volatile INT_t ) INT0_VirtualAddress) +#define gpio ((volatile GPIO_t) GPIO0_VirtualAddress) + + +#define IDT_CLOCK_MULT 2 +#define MIPS_CPU_TIMER_IRQ 7 +/* Interrupt Controller */ +#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000) +#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008) +#define IC_GROUP_OFFSET 0x0C + +#define NUM_INTR_GROUPS 5 +/* 16550 UARTs */ + +#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ +#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) /* GRP3 IRQ numbers start here */ +#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) /* GRP4 IRQ numbers start here */ +#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) /* GRP5 IRQ numbers start here */ +#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) + + +#ifdef __MIPSEB__ +#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003) +#else +#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000) +#endif + +#define RC32434_UART0_IRQ GROUP3_IRQ_BASE + 0 +// #define EB434_UART1_IRQ GROUP4_IRQ_BASE + 11 + +#define local_readl(addr) __raw_readl(addr) +#define local_writel(l,addr) __raw_writel(l,addr) + +/* cpu pipeline flush */ +static inline void rc32434_sync(void) +{ + __asm__ volatile ("sync"); +} + +static inline void rc32434_sync_udelay(int us) +{ + __asm__ volatile ("sync"); + udelay(us); +} + +static inline void rc32434_sync_delay(int ms) +{ + __asm__ volatile ("sync"); + mdelay(ms); +} + +/* + * C access to CLZ and CLO instructions + * (count leading zeroes/ones). + */ +static inline int rc32434_clz(unsigned long val) +{ + int ret; + __asm__ volatile ( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + ".set\tmips32\n\t" + "clz\t%0,%1\n\t" + ".set\tmips0\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (ret) + : "r" (val)); + + return ret; +} +static inline int rc32434_clo(unsigned long val) +{ + int ret; + __asm__ volatile ( + ".set\tnoreorder\n\t" + ".set\tnoat\n\t" + ".set\tmips32\n\t" + "clo\t%0,%1\n\t" + ".set\tmips0\n\t" + ".set\tat\n\t" + ".set\treorder" + : "=r" (ret) + : "r" (val)); + + return ret; +} + +#endif /* _RC32434_H_ */ diff --git a/target/linux/rb532-2.6/patches/100-rb5xx_support.patch b/target/linux/rb532-2.6/patches/100-rb5xx_support.patch index dbea022dac..5cff9b7d44 100644 --- a/target/linux/rb532-2.6/patches/100-rb5xx_support.patch +++ b/target/linux/rb532-2.6/patches/100-rb5xx_support.patch @@ -47,59 +47,6 @@ diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile # Toshiba RBTX4927 board or # Toshiba RBTX4937 board # -diff -urN linux.old/arch/mips/pci/fixup-rb500.c linux.dev/arch/mips/pci/fixup-rb500.c ---- linux.old/arch/mips/pci/fixup-rb500.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/pci/fixup-rb500.c 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,49 @@ -+/* -+ * Copyright 2001 MontaVista Software Inc. -+ * Author: MontaVista Software, Inc. -+ * stevel@mvista.com or source@mvista.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+static int __devinitdata irq_map[2][12] = { -+ { 0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1 }, -+ { 0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3 } -+}; -+ -+int __devinit pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) -+{ -+ int irq = 0; -+ -+ if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12) { -+ irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)]; -+ } -+ return irq + GROUP4_IRQ_BASE + 4; -+} -+ diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile --- linux.old/arch/mips/pci/Makefile 2006-11-29 22:57:37.000000000 +0100 +++ linux.dev/arch/mips/pci/Makefile 2006-12-14 04:09:50.000000000 +0100 @@ -108,1445 +55,6 @@ diff -urN linux.old/arch/mips/pci/Makefile linux.dev/arch/mips/pci/Makefile obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o +obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o -diff -urN linux.old/arch/mips/pci/ops-rc32434.c linux.dev/arch/mips/pci/ops-rc32434.c ---- linux.old/arch/mips/pci/ops-rc32434.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/pci/ops-rc32434.c 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,218 @@ -+/************************************************************************** -+ * -+ * BRIEF MODULE DESCRIPTION -+ * pci_ops for IDT EB434 board -+ * -+ * Copyright 2004 IDT Inc. (rischelp@idt.com) -+ * Copyright 2006 Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ ************************************************************************** -+ * May 2004 rkt, neb -+ * -+ * Initial Release -+ * -+ * -+ * -+ ************************************************************************** -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+#include -+ -+#define PCI_ACCESS_READ 0 -+#define PCI_ACCESS_WRITE 1 -+ -+ -+#define PCI_CFG_SET(bus,slot,func,off) \ -+ (rc32434_pci->pcicfga = (0x80000000 | \ -+ ((bus) << 16) | ((slot)<<11) | \ -+ ((func)<<8) | (off))) -+ -+static inline int config_access(unsigned char access_type, struct pci_bus *bus, -+ unsigned int devfn, unsigned char where, -+ u32 * data) -+{ -+ unsigned int slot = PCI_SLOT(devfn); -+ u8 func = PCI_FUNC(devfn); -+ -+ /* Setup address */ -+ PCI_CFG_SET(bus->number, slot, func, where); -+ rc32434_sync(); -+ -+ if (access_type == PCI_ACCESS_WRITE) -+ rc32434_pci->pcicfgd = *data; -+ else -+ *data = rc32434_pci->pcicfgd; -+ -+ rc32434_sync(); -+ -+ return 0; -+} -+ -+ -+/* -+ * We can't address 8 and 16 bit words directly. Instead we have to -+ * read/write a 32bit word and mask/modify the data we actually want. -+ */ -+static int read_config_byte(struct pci_bus *bus, unsigned int devfn, -+ int where, u8 * val) -+{ -+ u32 data; -+ int ret; -+ -+ ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); -+ *val = (data >> ((where & 3) << 3)) & 0xff; -+ return ret; -+} -+ -+static int read_config_word(struct pci_bus *bus, unsigned int devfn, -+ int where, u16 * val) -+{ -+ u32 data; -+ int ret; -+ -+ ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data); -+ *val = (data >> ((where & 3) << 3)) & 0xffff; -+ return ret; -+} -+ -+static int read_config_dword(struct pci_bus *bus, unsigned int devfn, -+ int where, u32 * val) -+{ -+ int ret; -+ int delay = 1; -+ -+ if (bus->number == 0 && PCI_SLOT(devfn) > 21) -+ return 0; -+ -+retry: -+ ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val); -+ -+ /* PCI scan: check for invalid values, device may not have -+ * finished initializing */ -+ -+ if (where == PCI_VENDOR_ID) { -+ if (ret == 0xffffffff || ret == 0x00000000 || -+ ret == 0x0000ffff || ret == 0xffff0000) { -+ -+ if (delay > 4) -+ return 0; -+ -+ delay *= 2; -+ msleep(delay); -+ goto retry; -+ } -+ } -+ -+ return ret; -+} -+ -+static int -+write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, -+ u8 val) -+{ -+ u32 data = 0; -+ -+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) -+ return -1; -+ -+ data = (data & ~(0xff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ -+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) -+ return -1; -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+ -+static int -+write_config_word(struct pci_bus *bus, unsigned int devfn, int where, -+ u16 val) -+{ -+ u32 data = 0; -+ -+ if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data)) -+ return -1; -+ -+ data = (data & ~(0xffff << ((where & 3) << 3))) | -+ (val << ((where & 3) << 3)); -+ -+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data)) -+ return -1; -+ -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+ -+static int -+write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, -+ u32 val) -+{ -+ if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val)) -+ return -1; -+ -+ return PCIBIOS_SUCCESSFUL; -+} -+ -+static int pci_config_read(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 * val) -+{ -+ switch (size) { -+ case 1: -+ return read_config_byte(bus, devfn, where, (u8 *) val); -+ case 2: -+ return read_config_word(bus, devfn, where, (u16 *) val); -+ default: -+ return read_config_dword(bus, devfn, where, val); -+ } -+} -+ -+static int pci_config_write(struct pci_bus *bus, unsigned int devfn, -+ int where, int size, u32 val) -+{ -+ switch (size) { -+ case 1: -+ return write_config_byte(bus, devfn, where, (u8) val); -+ case 2: -+ return write_config_word(bus, devfn, where, (u16) val); -+ default: -+ return write_config_dword(bus, devfn, where, val); -+ } -+} -+ -+struct pci_ops rc32434_pci_ops = { -+ .read = pci_config_read, -+ .write = pci_config_write, -+}; -diff -urN linux.old/arch/mips/pci/pci-rc32434.c linux.dev/arch/mips/pci/pci-rc32434.c ---- linux.old/arch/mips/pci/pci-rc32434.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/pci/pci-rc32434.c 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,234 @@ -+/************************************************************************** -+ * -+ * BRIEF MODULE DESCRIPTION -+ * PCI initialization for IDT EB434 board -+ * -+ * Copyright 2004 IDT Inc. (rischelp@idt.com) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ ************************************************************************** -+ * May 2004 rkt, neb -+ * -+ * Initial Release -+ * -+ * -+ * -+ ************************************************************************** -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#define PCI_ACCESS_READ 0 -+#define PCI_ACCESS_WRITE 1 -+ -+/* define an unsigned array for the PCI registers */ -+unsigned int korinaCnfgRegs[25] = { -+ KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4, -+ KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8, -+ KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12, -+ KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16, -+ KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20, -+ KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24 -+}; -+static struct resource rc32434_res_pci_mem1; -+static struct resource rc32434_res_pci_mem2; -+ -+static struct resource rc32434_res_pci_mem1 = { -+ .name = "PCI MEM1", -+ .start = 0x50000000, -+ .end = 0x5FFFFFFF, -+ .flags = IORESOURCE_MEM, -+ .parent = &rc32434_res_pci_mem1, -+ .sibling = NULL, -+ .child = &rc32434_res_pci_mem2 -+}; -+ -+static struct resource rc32434_res_pci_mem2 = { -+ .name = "PCI Mem2", -+ .start = 0x60000000, -+ .end = 0x6FFFFFFF, -+ .flags = IORESOURCE_MEM, -+ .parent = &rc32434_res_pci_mem1, -+ .sibling = NULL, -+ .child = NULL -+}; -+ -+static struct resource rc32434_res_pci_io1 = { -+ .name = "PCI I/O1", -+ .start = 0x18800000, -+ .end = 0x188FFFFF, -+ .flags = IORESOURCE_IO, -+}; -+ -+extern struct pci_ops rc32434_pci_ops; -+ -+#define PCI_MEM1_START PCI_ADDR_START -+#define PCI_MEM1_END PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1 -+#define PCI_MEM2_START PCI_ADDR_START + CPUTOPCI_MEM_WIN -+#define PCI_MEM2_END PCI_ADDR_START + ( 2* CPUTOPCI_MEM_WIN) - 1 -+#define PCI_IO1_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) -+#define PCI_IO1_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -1 -+#define PCI_IO2_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -+#define PCI_IO2_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) -1 -+ -+ -+struct pci_controller rc32434_controller2; -+ -+struct pci_controller rc32434_controller = { -+ .pci_ops = &rc32434_pci_ops, -+ .mem_resource = &rc32434_res_pci_mem1, -+ .io_resource = &rc32434_res_pci_io1, -+ .mem_offset = 0, -+ .io_offset = 0, -+ -+}; -+ -+#ifdef __MIPSEB__ -+#define PCI_ENDIAN_FLAG PCILBAC_sb_m -+#else -+#define PCI_ENDIAN_FLAG 0 -+#endif -+ -+static int __init rc32434_pcibridge_init(void) -+{ -+ unsigned int pcicValue, pcicData = 0; -+ unsigned int dummyRead, pciCntlVal; -+ int loopCount; -+ unsigned int pciConfigAddr; -+ -+ pcicValue = rc32434_pci->pcic; -+ pcicValue = (pcicValue >> PCIM_SHFT) & PCIM_BIT_LEN; -+ if (!((pcicValue == PCIM_H_EA) || -+ (pcicValue == PCIM_H_IA_FIX) || -+ (pcicValue == PCIM_H_IA_RR))) { -+ printk("PCI init error!!!\n"); -+ /* Not in Host Mode, return ERROR */ -+ return -1; -+ } -+ /* Enables the Idle Grant mode, Arbiter Parking */ -+ pcicData |=(PCIC_igm_m|PCIC_eap_m|PCIC_en_m); -+ rc32434_pci->pcic = pcicData; /* Enable the PCI bus Interface */ -+ /* Zero out the PCI status & PCI Status Mask */ -+ for(;;) -+ { -+ pcicData = rc32434_pci->pcis; -+ if (!(pcicData & PCIS_rip_m)) -+ break; -+ } -+ -+ rc32434_pci->pcis = 0; -+ rc32434_pci->pcism = 0xFFFFFFFF; -+ /* Zero out the PCI decoupled registers */ -+ rc32434_pci->pcidac=0; /* disable PCI decoupled accesses at initialization */ -+ rc32434_pci->pcidas=0; /* clear the status */ -+ rc32434_pci->pcidasm=0x0000007F; /* Mask all the interrupts */ -+ /* Mask PCI Messaging Interrupts */ -+ rc32434_pci_msg->pciiic = 0; -+ rc32434_pci_msg->pciiim = 0xFFFFFFFF; -+ rc32434_pci_msg->pciioic = 0; -+ rc32434_pci_msg->pciioim = 0; -+ -+ -+ /* Setup PCILB0 as Memory Window */ -+ rc32434_pci->pcilba[0].a = (unsigned int) (PCI_ADDR_START); -+ -+ /* setup the PCI map address as same as the local address */ -+ -+ rc32434_pci->pcilba[0].m = (unsigned int) (PCI_ADDR_START); -+ -+ -+ /* Setup PCILBA1 as MEM */ -+ rc32434_pci->pcilba[0].c = ( ((SIZE_256MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG); -+ dummyRead = rc32434_pci->pcilba[0].c; /* flush the CPU write Buffers */ -+ rc32434_pci->pcilba[1].a = 0x60000000; -+ rc32434_pci->pcilba[1].m = 0x60000000; -+ -+ /* setup PCILBA2 as IO Window*/ -+ rc32434_pci->pcilba[1].c = (((SIZE_256MB & 0x1f) << PCILBAC_size_b )| PCI_ENDIAN_FLAG); -+ dummyRead = rc32434_pci->pcilba[1].c; /* flush the CPU write Buffers */ -+ rc32434_pci->pcilba[2].a = 0x18C00000; -+ rc32434_pci->pcilba[2].m = 0x18FFFFFF; -+ -+ /* setup PCILBA2 as IO Window*/ -+ rc32434_pci->pcilba[2].c = (((SIZE_4MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG ); -+ dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */ -+ -+ /* Setup PCILBA3 as IO Window */ -+ rc32434_pci->pcilba[3].a = 0x18800000; -+ rc32434_pci->pcilba[3].m = 0x18800000; -+ rc32434_pci->pcilba[3].c = ( (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m) | PCI_ENDIAN_FLAG); -+ dummyRead = rc32434_pci->pcilba[3].c; /* flush the CPU write Buffers */ -+ -+ pciConfigAddr=(unsigned int)(0x80000004); -+ for(loopCount=0;loopCount<24;loopCount++){ -+ rc32434_pci->pcicfga=pciConfigAddr; -+ dummyRead=rc32434_pci->pcicfga; -+ rc32434_pci->pcicfgd = korinaCnfgRegs[loopCount]; -+ dummyRead=rc32434_pci->pcicfgd; -+ pciConfigAddr += 4; -+ } -+ rc32434_pci->pcitc = (unsigned int)((PCITC_RTIMER_VAL&0xff) << PCITC_rtimer_b) -+ | ((PCITC_DTIMER_VAL&0xff) << PCITC_dtimer_b); -+ -+ pciCntlVal=rc32434_pci->pcic; -+ pciCntlVal &=~(PCIC_tnr_m); -+ rc32434_pci->pcic = pciCntlVal; -+ pciCntlVal=rc32434_pci->pcic; -+ return 0; -+} -+ -+/* Do platform specific device initialization at pci_enable_device() time */ -+int pcibios_plat_dev_init(struct pci_dev *dev) -+{ -+ if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) { -+ /* disable prefetched memory range */ -+ pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0); -+ pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10); -+ -+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4); -+ } -+ return 0; -+} -+ -+static int __init rc32434_pci_init(void) -+{ -+ printk("PCI: Initializing PCI\n"); -+ -+ ioport_resource.start = rc32434_res_pci_io1.start; -+ ioport_resource.end = rc32434_res_pci_io1.end; -+ -+ rc32434_pcibridge_init(); -+ -+ register_pci_controller(&rc32434_controller); -+ rc32434_sync(); -+} -+ -+arch_initcall(rc32434_pci_init); -+ -diff -urN linux.old/arch/mips/rb500/devices.c linux.dev/arch/mips/rb500/devices.c ---- linux.old/arch/mips/rb500/devices.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/devices.c 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,210 @@ -+/* -+ * RouterBoard 500 Platform devices -+ * -+ * Copyright (C) 2006 Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * $Id$ -+ */ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+ -+#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0 -+#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1 -+#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9 -+#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10 -+ -+#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET) -+#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET) -+ -+static struct resource korina_dev0_res[] = { -+ { -+ .name = "korina_regs", -+ .start = ETH0_PhysicalAddress, -+ .end = ETH0_PhysicalAddress + sizeof(ETH_t), -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "korina_rx", -+ .start = ETH0_DMA_RX_IRQ, -+ .end = ETH0_DMA_RX_IRQ, -+ .flags = IORESOURCE_IRQ -+ }, -+ { -+ .name = "korina_tx", -+ .start = ETH0_DMA_TX_IRQ, -+ .end = ETH0_DMA_TX_IRQ, -+ .flags = IORESOURCE_IRQ -+ }, -+ { -+ .name = "korina_ovr", -+ .start = ETH0_RX_OVR_IRQ, -+ .end = ETH0_RX_OVR_IRQ, -+ .flags = IORESOURCE_IRQ -+ }, -+ { -+ .name = "korina_und", -+ .start = ETH0_TX_UND_IRQ, -+ .end = ETH0_TX_UND_IRQ, -+ .flags = IORESOURCE_IRQ -+ }, -+ { -+ .name = "korina_dma_rx", -+ .start = ETH0_RX_DMA_ADDR, -+ .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1, -+ .flags = IORESOURCE_MEM, -+ }, -+ { -+ .name = "korina_dma_tx", -+ .start = ETH0_TX_DMA_ADDR, -+ .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1, -+ .flags = IORESOURCE_MEM, -+ } -+}; -+ -+static struct korina_device korina_dev0_data = { -+ .name = "korina0", -+ .mac = { 0xde, 0xca, 0xff, 0xc0, 0xff, 0xee } -+}; -+ -+static struct platform_device korina_dev0 = { -+ .id = 0, -+ .name = "korina", -+ .dev.platform_data = &korina_dev0_data, -+ .resource = korina_dev0_res, -+ .num_resources = ARRAY_SIZE(korina_dev0_res), -+}; -+ -+ -+#define CF_GPIO_NUM 13 -+ -+static struct resource cf_slot0_res[] = { -+ { -+ .name = "cf_membase", -+ .flags = IORESOURCE_MEM -+ }, -+ { -+ .name = "cf_irq", -+ .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */ -+ .end = (8 + 4 * 32 + CF_GPIO_NUM), -+ .flags = IORESOURCE_IRQ -+ } -+}; -+ -+static struct cf_device cf_slot0_data = { -+ .gpio_pin = 13 -+}; -+ -+static struct platform_device cf_slot0 = { -+ .id = 0, -+ .name = "rb500-cf", -+ .dev.platform_data = &cf_slot0_data, -+ .resource = cf_slot0_res, -+ .num_resources = ARRAY_SIZE(cf_slot0_res), -+}; -+ -+/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */ -+static struct resource nand_slot0_res[] = { -+ { -+ .name = "nand_membase", -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct platform_device nand_slot0 = { -+ .id = 0, -+ .name = "rb500-nand", -+ .resource = nand_slot0_res, -+ .num_resources = ARRAY_SIZE(nand_slot0_res), -+}; -+ -+ -+static struct platform_device *rb500_devs[] = { -+ &korina_dev0, -+ &nand_slot0, -+ &cf_slot0 -+}; -+ -+static void __init parse_mac_addr(char* macstr) -+{ -+ int i, j; -+ unsigned char result, value; -+ -+ for (i=0; i<6; i++) { -+ result = 0; -+ if (i != 5 && *(macstr+2) != ':') { -+ return; -+ } -+ for (j=0; j<2; j++) { -+ if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' : -+ toupper(*macstr)-'A'+10) < 16) { -+ result = result*16 + value; -+ macstr++; -+ } -+ else return; -+ } -+ -+ macstr++; -+ korina_dev0_data.mac[i] = result; -+ } -+} -+ -+ -+/* DEVICE CONTROLLER 1 */ -+#define CFG_DC_DEV1 (void*)0xb8010010 -+#define CFG_DC_DEV2 (void*)0xb8010020 -+#define CFG_DC_DEVBASE 0x0 -+#define CFG_DC_DEVMASK 0x4 -+#define CFG_DC_DEVC 0x8 -+#define CFG_DC_DEVTC 0xC -+ -+ -+static int __init plat_setup_devices(void) -+{ -+ /* Look for the CF card reader */ -+ if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK)) -+ rb500_devs[1] = NULL; -+ else { -+ cf_slot0_res[0].start = readl(CFG_DC_DEV1 + CFG_DC_DEVBASE); -+ cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000; -+ } -+ -+ /* There is always a NAND device */ -+ nand_slot0_res[0].start = readl( CFG_DC_DEV2 + CFG_DC_DEVBASE); -+ nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000; -+ -+ return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs)); -+} -+ -+static int __init setup_kmac(char *s) -+{ -+ printk("korina mac = %s\n",s); -+ parse_mac_addr(s); -+ return 0; -+} -+ -+__setup("kmac=", setup_kmac); -+arch_initcall(plat_setup_devices); -+ -+ -diff -urN linux.old/arch/mips/rb500/irq.c linux.dev/arch/mips/rb500/irq.c ---- linux.old/arch/mips/rb500/irq.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/irq.c 2006-12-14 04:14:16.000000000 +0100 -@@ -0,0 +1,264 @@ -+/* -+ * BRIEF MODULE DESCRIPTION -+ * RC32434 interrupt routines. -+ * -+ * Copyright 2002 MontaVista Software Inc. -+ * Author: MontaVista Software, Inc. -+ * stevel@mvista.com or source@mvista.com -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern void set_debug_traps(void); -+extern irq_cpustat_t irq_stat [NR_CPUS]; -+unsigned int local_bh_count[NR_CPUS]; -+unsigned int local_irq_count[NR_CPUS]; -+ -+static unsigned int startup_irq(unsigned int irq); -+static void rb500_end_irq(unsigned int irq_nr); -+static void mask_and_ack_irq(unsigned int irq_nr); -+static void rb500_enable_irq(unsigned int irq_nr); -+static void rb500_disable_irq(unsigned int irq_nr); -+ -+extern void __init init_generic_irq(void); -+ -+typedef struct { -+ u32 mask; /* mask of valid bits in pending/mask registers */ -+ volatile u32 *base_addr; -+} intr_group_t; -+ -+#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32) -+ -+#if (NR_IRQS < RC32434_NR_IRQS) -+#error Too little irqs defined. Did you override ? -+#endif -+ -+static const intr_group_t intr_group[NUM_INTR_GROUPS] = { -+ { 0x0000efff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET) }, -+ { 0x00001fff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET) }, -+ { 0x00000007, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET) }, -+ { 0x0003ffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET) }, -+ { 0xffffffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET) } -+}; -+ -+#define READ_PEND(base) (*(base)) -+#define READ_MASK(base) (*(base + 2)) -+#define WRITE_MASK(base, val) (*(base + 2) = (val)) -+ -+static inline int irq_to_group(unsigned int irq_nr) -+{ -+ return ((irq_nr - GROUP0_IRQ_BASE) >> 5); -+} -+ -+static inline int group_to_ip(unsigned int group) -+{ -+ return group + 2; -+} -+ -+static inline void enable_local_irq(unsigned int ip) -+{ -+ int ipnum = 0x100 << ip; -+ clear_c0_cause(ipnum); -+ set_c0_status(ipnum); -+} -+ -+static inline void disable_local_irq(unsigned int ip) -+{ -+ int ipnum = 0x100 << ip; -+ clear_c0_status(ipnum); -+} -+ -+static inline void ack_local_irq(unsigned int ip) -+{ -+ int ipnum = 0x100 << ip; -+ clear_c0_cause(ipnum); -+} -+ -+static void rb500_enable_irq(unsigned int irq_nr) -+{ -+ int ip = irq_nr - GROUP0_IRQ_BASE; -+ unsigned int group, intr_bit; -+ volatile unsigned int *addr; -+ -+ -+ if (ip < 0) -+ enable_local_irq(irq_nr); -+ else { -+ group = ip >> 5; -+ -+ ip &= (1<<5)-1; -+ intr_bit = 1 << ip; -+ -+ enable_local_irq(group_to_ip(group)); -+ -+ addr = intr_group[group].base_addr; -+ WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit); -+ } -+} -+ -+static void rb500_disable_irq(unsigned int irq_nr) -+{ -+ int ip = irq_nr - GROUP0_IRQ_BASE; -+ unsigned int group, intr_bit, mask; -+ volatile unsigned int *addr; -+ -+ if (ip < 0) { -+ disable_local_irq(irq_nr); -+ }else{ -+ group = ip >> 5; -+ -+ ip &= (1<<5) -1; -+ intr_bit = 1 << ip; -+ addr = intr_group[group].base_addr; -+ mask = READ_MASK(addr); -+ mask |= intr_bit; -+ WRITE_MASK(addr,mask); -+ -+ /* -+ * if there are no more interrupts enabled in this -+ * group, disable corresponding IP -+ */ -+ if (mask == intr_group[group].mask) -+ disable_local_irq(group_to_ip(group)); -+ } -+} -+ -+static unsigned int startup_irq(unsigned int irq_nr) -+{ -+ rb500_enable_irq(irq_nr); -+ return 0; -+} -+ -+static void shutdown_irq(unsigned int irq_nr) -+{ -+ rb500_disable_irq(irq_nr); -+ return; -+} -+ -+static void mask_and_ack_irq(unsigned int irq_nr) -+{ -+ rb500_disable_irq(irq_nr); -+ ack_local_irq(group_to_ip(irq_to_group(irq_nr))); -+} -+ -+static void rb500_end_irq(unsigned int irq_nr) -+{ -+ -+ int ip = irq_nr - GROUP0_IRQ_BASE; -+ unsigned int intr_bit, group; -+ volatile unsigned int *addr; -+ -+ if ((irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) { -+ printk("warning: end_irq %d did not enable (%x)\n", -+ irq_nr, irq_desc[irq_nr].status); -+ return; -+ } -+ -+ if (ip < 0) { -+ enable_local_irq(irq_nr); -+ } else { -+ group = ip >> 5; -+ -+ ip &= (1 << 5) - 1; -+ intr_bit = 1 << ip; -+ -+ if (irq_nr >= GROUP4_IRQ_BASE && irq_nr <= (GROUP4_IRQ_BASE + 13)) { -+ gpio->gpioistat = gpio->gpioistat & ~intr_bit; -+ } -+ -+ enable_local_irq(group_to_ip(group)); -+ -+ addr = intr_group[group].base_addr; -+ WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit); -+ } -+} -+ -+static struct hw_interrupt_type rc32434_irq_type = { -+ .typename = "RB500", -+ .startup = startup_irq, -+ .shutdown = shutdown_irq, -+ .enable = rb500_enable_irq, -+ .disable = rb500_disable_irq, -+ .ack = mask_and_ack_irq, -+ .end = rb500_end_irq, -+}; -+ -+ -+void __init arch_init_irq(void) -+{ -+ int i; -+ -+ printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS); -+ memset(irq_desc, 0, sizeof(irq_desc)); -+ -+ for (i = 0; i < RC32434_NR_IRQS; i++) { -+ irq_desc[i].status = IRQ_DISABLED; -+ irq_desc[i].action = NULL; -+ irq_desc[i].depth = 1; -+ irq_desc[i].chip = &rc32434_irq_type; -+ spin_lock_init(&irq_desc[i].lock); -+ } -+} -+ -+/* Main Interrupt dispatcher */ -+asmlinkage void plat_irq_dispatch(void) -+{ -+ unsigned int ip, pend, group; -+ volatile unsigned int *addr; -+ unsigned int cp0_cause = read_c0_cause() & read_c0_status(); -+ -+ if (cp0_cause & CAUSEF_IP7) { -+ ll_timer_interrupt(7); -+ } else if ((ip = (cp0_cause & 0x7c00))) { -+ group = 21 - rc32434_clz(ip); -+ -+ addr = intr_group[group].base_addr; -+ -+ pend = READ_PEND(addr); -+ pend &= ~READ_MASK(addr); // only unmasked interrupts -+ pend = 39 - rc32434_clz(pend); -+ do_IRQ((group << 5) + pend); -+ } -+} -diff -urN linux.old/arch/mips/rb500/Makefile linux.dev/arch/mips/rb500/Makefile ---- linux.old/arch/mips/rb500/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/Makefile 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,5 @@ -+# -+# Makefile for the RB500 board specific parts of the kernel -+# -+ -+obj-y += irq.o time.o setup.o serial.o prom.o misc.o devices.o -diff -urN linux.old/arch/mips/rb500/misc.c linux.dev/arch/mips/rb500/misc.c ---- linux.old/arch/mips/rb500/misc.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/misc.c 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,56 @@ -+#include -+#include /* printk() */ -+#include /* size_t */ -+#include -+#include -+#include -+ -+#define GPIO_BADDR 0xb8050000 -+ -+ -+static volatile unsigned char *devCtl3Base = 0; -+static unsigned char latchU5State = 0; -+static spinlock_t clu5Lock = SPIN_LOCK_UNLOCKED; -+ -+void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val) { -+ unsigned flags, data; -+ unsigned i = 0; -+ spin_lock_irqsave(&clu5Lock, flags); -+ data = *(volatile unsigned *) (IDT434_REG_BASE + regOffs); -+ for (i = 0; i != len; ++i) { -+ if (val & (1 << i)) data |= (1 << (i + bit)); -+ else data &= ~(1 << (i + bit)); -+ } -+ *(volatile unsigned *) (IDT434_REG_BASE + regOffs) = data; -+ spin_unlock_irqrestore(&clu5Lock, flags); -+} -+ -+void changeLatchU5(unsigned char orMask, unsigned char nandMask) { -+ unsigned flags; -+ spin_lock_irqsave(&clu5Lock, flags); -+ latchU5State = (latchU5State | orMask) & ~nandMask; -+ if( !devCtl3Base) devCtl3Base = (volatile unsigned char *) -+ KSEG1ADDR(*(volatile unsigned *) KSEG1ADDR(0x18010030)); -+ *devCtl3Base = latchU5State; -+ spin_unlock_irqrestore(&clu5Lock, flags); -+} -+ -+u32 gpio_get(gpio_func func) -+{ -+ return readl((void *) GPIO_BADDR + func); -+} -+ -+void gpio_set(gpio_func func, u32 mask, u32 value) -+{ -+ u32 val = readl((void *) GPIO_BADDR + func); -+ -+ val &= ~mask; -+ val |= value & mask; -+ -+ writel(val, (void *) GPIO_BADDR + func); -+} -+ -+EXPORT_SYMBOL(gpio_set); -+EXPORT_SYMBOL(gpio_get); -+EXPORT_SYMBOL(set434Reg); -+EXPORT_SYMBOL(changeLatchU5); -diff -urN linux.old/arch/mips/rb500/prom.c linux.dev/arch/mips/rb500/prom.c ---- linux.old/arch/mips/rb500/prom.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/prom.c 2006-12-14 05:15:05.000000000 +0100 -@@ -0,0 +1,161 @@ -+/* -+* prom.c -+********************************************************************** -+* P . Sadik Oct 10, 2003 -+* -+* Started change log -+* idt_cpu_freq is make a kernel configuration parameter -+* idt_cpu_freq is exported so that other modules can use it. -+* Code cleanup -+********************************************************************** -+* P. Sadik Oct 20, 2003 -+* -+* Removed NVRAM code from here, since they are already available under -+* nvram directory. -+* Added serial port initialisation. -+********************************************************************** -+********************************************************************** -+* P. Sadik Oct 30, 2003 -+* -+* Added reset_cons_port -+********************************************************************** -+ -+ P.Christeas, 2005-2006 -+ Port to 2.6, add 2.6 cmdline parsing -+ -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define PROM_ENTRY(x) (0xbfc00000+((x)*8)) -+extern void __init setup_serial_port(void); -+ -+unsigned int idt_cpu_freq = 132000000; -+EXPORT_SYMBOL(idt_cpu_freq); -+unsigned int board_type = 500; -+EXPORT_SYMBOL(board_type); -+unsigned int gpio_bootup_state = 0; -+EXPORT_SYMBOL(gpio_bootup_state); -+ -+ -+char mips_mac_address[18] = "08:00:06:05:40:01"; -+EXPORT_SYMBOL(mips_mac_address); -+ -+/* what to append to cmdline when button is [not] pressed */ -+#define GPIO_INIT_NOBUTTON "" -+#define GPIO_INIT_BUTTON " 2" -+ -+#ifdef CONFIG_MIKROTIK_RB500 -+unsigned soft_reboot = 0; -+EXPORT_SYMBOL(soft_reboot); -+#endif -+ -+#define SR_NMI 0x00180000 /* NMI */ -+#define SERIAL_SPEED_ENTRY 0x00000001 -+ -+#ifdef CONFIG_REMOTE_DEBUG -+extern int remote_debug; -+#endif -+ -+extern unsigned long mips_machgroup; -+extern unsigned long mips_machtype; -+ -+#define FREQ_TAG "HZ=" -+#define GPIO_TAG "gpio=" -+#define KMAC_TAG "kmac=" -+#define MEM_TAG "mem=" -+#define BOARD_TAG "board=" -+#define IGNORE_CMDLINE_MEM 1 -+#define DEBUG_DDR -+ -+void parse_soft_settings(unsigned *ptr, unsigned size); -+void parse_hard_settings(unsigned *ptr, unsigned size); -+ -+void __init prom_setup_cmdline(void); -+ -+void __init prom_init(void) -+{ -+ DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */ -+ phys_t memsize = 0-ddr->ddrmask; -+ -+ /* this should be the very first message, even before serial is properly initialized */ -+ prom_setup_cmdline(); -+ setup_serial_port(); -+ -+ mips_machgroup = MACH_GROUP_MIKROTIK; -+ soft_reboot = read_c0_status() & SR_NMI; -+ pm_power_off = NULL; -+ -+ /* -+ * give all RAM to boot allocator, -+ * except for the first 0x400 and the last 0x200 bytes -+ */ -+ add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM); -+} -+ -+void prom_free_prom_memory(void) -+{ -+ /* FIXME: STUB */ -+} -+ -+void __init prom_setup_cmdline(void){ -+ char cmd_line[CL_SIZE]; -+ char *cp; -+ int prom_argc; -+ char **prom_argv, **prom_envp; -+ int i; -+ -+ prom_argc = fw_arg0; -+ prom_argv = (char **) fw_arg1; -+ prom_envp = (char **) fw_arg2; -+ -+ cp=cmd_line; -+ /* Note: it is common that parameters start at argv[1] and not argv[0], -+ however, our elf loader starts at [0] */ -+ for(i=0;i0) *(cp++) = ' '; -+ if (strncmp(prom_argv[i], BOARD_TAG, sizeof(BOARD_TAG) - 1) == 0) { -+ board_type = simple_strtoul(prom_argv[i] + sizeof(BOARD_TAG) - 1, 0, 10); -+ } -+ if (strncmp(prom_argv[i], GPIO_TAG, sizeof(GPIO_TAG) - 1) == 0) { -+ gpio_bootup_state = simple_strtoul(prom_argv[i] + sizeof(GPIO_TAG) - 1, 0, 10); -+ } -+ strcpy(cp,prom_argv[i]); -+ cp+=strlen(prom_argv[i]); -+ } -+ -+ i=strlen(arcs_cmdline); -+ if (i>0){ -+ *(cp++) = ' '; -+ strcpy(cp,arcs_cmdline); -+ cp+=strlen(arcs_cmdline); -+ } -+ if (gpio_bootup_state&0x02) -+ strcpy(cp,GPIO_INIT_NOBUTTON); -+ else -+ strcpy(cp,GPIO_INIT_BUTTON); -+ cmd_line[CL_SIZE-1] = '\0'; -+ -+ strcpy(arcs_cmdline,cmd_line); -+} -+ -diff -urN linux.old/arch/mips/rb500/serial.c linux.dev/arch/mips/rb500/serial.c ---- linux.old/arch/mips/rb500/serial.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/serial.c 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,77 @@ -+/************************************************************************** -+ * -+ * BRIEF MODULE DESCRIPTION -+ * Serial port initialisation. -+ * -+ * Copyright 2004 IDT Inc. (rischelp@idt.com) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ ************************************************************************** -+ * May 2004 rkt, neb -+ * -+ * Initial Release -+ * -+ * -+ * -+ ************************************************************************** -+ */ -+ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern unsigned int idt_cpu_freq; -+ -+static struct uart_port serial_req = { -+ .type = PORT_16550A, -+ .line = 0, -+ .irq = RC32434_UART0_IRQ, -+ .flags = STD_COM_FLAGS, -+ .iotype = UPIO_MEM, -+ .membase = (char *) KSEG1ADDR(RC32434_UART0_BASE), -+// .fifosize = 14 -+ .regshift = 2 -+}; -+ -+int __init setup_serial_port(void) -+{ -+ serial_req.uartclk = idt_cpu_freq; -+ -+ if (early_serial_setup(&serial_req)) -+ return -ENODEV; -+ -+ return(0); -+} -diff -urN linux.old/arch/mips/rb500/setup.c linux.dev/arch/mips/rb500/setup.c ---- linux.old/arch/mips/rb500/setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/setup.c 2006-12-14 04:51:12.000000000 +0100 -@@ -0,0 +1,81 @@ -+/* -+ * setup.c - boot time setup code -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include /* for KSEG1ADDR() */ -+#include -+#include -+#include -+#include -+ -+#ifdef CONFIG_PCI -+extern void *rc32434_time_init(void); -+extern int __init rc32434_pcibridge_init(void); -+#endif -+ -+#define epldMask ((volatile unsigned char *)0xB900000d) -+ -+static void rb_machine_restart(char *command) -+{ -+ /* just jump to the reset vector */ -+ * (volatile unsigned *) KSEG1ADDR(0x18008000) = 0x80000001; -+ ((void (*)(void))KSEG1ADDR(0x1FC00000u))(); -+} -+ -+static void rb_machine_halt(void) -+{ -+ for(;;) continue; -+} -+ -+#ifdef CONFIG_CPU_HAS_WB -+void (*__wbflush) (void); -+ -+static void rb_write_buffer_flush(void) -+{ -+ __asm__ __volatile__ -+ ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t"); -+} -+#endif -+ -+void __init plat_mem_setup(void) -+{ -+ unsigned int pciCntlVal; -+ -+ board_time_init = rc32434_time_init; -+ -+#ifdef CONFIG_CPU_HAS_WB -+ __wbflush = rb_write_buffer_flush; -+#endif -+ _machine_restart = rb_machine_restart; -+ _machine_halt = rb_machine_halt; -+ /*_machine_power_off = rb_machine_power_halt;*/ -+ pm_power_off = rb_machine_halt; -+ -+ set_io_port_base(KSEG1); -+ -+ pciCntlVal=rc32434_pci->pcic; -+ pciCntlVal &= 0xFFFFFF7; -+ rc32434_pci->pcic = pciCntlVal; -+ -+#ifdef CONFIG_PCI -+ /* Enable PCI interrupts in EPLD Mask register */ -+ *epldMask = 0x0; -+ *(epldMask + 1) = 0x0; -+#endif -+ write_c0_wired(0); -+} -+ -+const char *get_system_type(void) -+{ -+ return "MIPS RB500"; -+} -diff -urN linux.old/arch/mips/rb500/time.c linux.dev/arch/mips/rb500/time.c ---- linux.old/arch/mips/rb500/time.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/arch/mips/rb500/time.c 2006-12-14 04:48:33.000000000 +0100 -@@ -0,0 +1,93 @@ -+/* -+**************************************************************************** -+* Carsten Langgaard, carstenl@mips.com -+* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. -+* -+*************************************************************************** -+* -+* This program is free software; you can distribute it and/or modify it -+* under the terms of the GNU General Public License (Version 2) as -+* published by the Free Software Foundation. -+* -+* This program is distributed in the hope it will be useful, but WITHOUT -+* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or -+* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -+* for more details. -+* -+* You should have received a copy of the GNU General Public License along -+* with this program; if not, write to the Free Software Foundation, Inc., -+* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. -+* -+**************************************************************************** -+* -+* Setting up the clock on the MIPS boards. -+* -+**************************************************************************** -+* P. Sadik Oct 10, 2003 -+* -+* Started change log. -+* mips_counter_frequency is now calculated at run time, based on idt_cpu_freq. -+* Code cleanup -+**************************************************************************** -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+static unsigned long r4k_offset; /* Amount to incr compare reg each time */ -+static unsigned long r4k_cur; /* What counter should be at next timer irq */ -+extern unsigned int mips_hpt_frequency; -+extern unsigned int idt_cpu_freq; -+ -+/* -+ * Figure out the r4k offset, the amount to increment the compare -+ * register for each time tick. There is no RTC available. -+ * -+ * The RC32434 counts at half the CPU *core* speed. -+ */ -+static unsigned long __init cal_r4koff(void) -+{ -+ mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2; -+ return (mips_hpt_frequency / HZ); -+} -+ -+ -+void __init rc32434_time_init(void) -+{ -+ unsigned int est_freq, flags; -+ -+ local_irq_save(flags); -+ -+ printk("calculating r4koff... "); -+ r4k_offset = cal_r4koff(); -+ printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); -+ -+ est_freq = 2*r4k_offset*HZ; -+ est_freq += 5000; /* round */ -+ est_freq -= est_freq%10000; -+ printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, -+ (est_freq%1000000)*100/1000000); -+ local_irq_restore(flags); -+} -+ -+void __init plat_timer_setup(struct irqaction *irq) -+{ -+ /* we are using the cpu counter for timer interrupts */ -+ setup_irq(MIPS_CPU_TIMER_IRQ, irq); -+ -+ /* to generate the first timer interrupt */ -+ r4k_cur = (read_c0_count() + r4k_offset); -+ write_c0_compare(r4k_cur); -+} -+ diff -urN linux.old/drivers/pci/Makefile linux.dev/drivers/pci/Makefile --- linux.old/drivers/pci/Makefile 2006-11-29 22:57:37.000000000 +0100 +++ linux.dev/drivers/pci/Makefile 2006-12-14 04:09:50.000000000 +0100 @@ -1583,1927 +91,4 @@ diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h /* * ISA Level encodings -diff -urN linux.old/include/asm-mips/rc32434/ddr.h linux.dev/include/asm-mips/rc32434/ddr.h ---- linux.old/include/asm-mips/rc32434/ddr.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/ddr.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,173 @@ -+#ifndef __IDT_DDR_H__ -+#define __IDT_DDR_H__ -+ -+/******************************************************************************* -+ * -+ * Copyright 2002 Integrated Device Technology, Inc. -+ * All rights reserved. -+ * -+ * DDR register definition. -+ * -+ * File : $Id: ddr.h,v 1.2 2002/06/06 18:34:03 astichte Exp $ -+ * -+ * Author : ryan.holmQVist@idt.com -+ * Date : 20011005 -+ * Update : -+ * $Log: ddr.h,v $ -+ * Revision 1.2 2002/06/06 18:34:03 astichte -+ * Added XXX_PhysicalAddress and XXX_VirtualAddress -+ * -+ * Revision 1.1 2002/05/29 17:33:21 sysarch -+ * jba File moved from vcode/include/idt/acacia -+ * -+ * -+ ******************************************************************************/ -+ -+enum -+{ -+ DDR0_PhysicalAddress = 0x18018000, -+ DDR_PhysicalAddress = DDR0_PhysicalAddress, // Default -+ -+ DDR0_VirtualAddress = 0xb8018000, -+ DDR_VirtualAddress = DDR0_VirtualAddress, // Default -+} ; -+ -+typedef struct DDR_s -+{ -+ u32 ddrbase ; -+ u32 ddrmask ; -+ u32 res1; -+ u32 res2; -+ u32 ddrc ; -+ u32 ddrabase ; -+ u32 ddramask ; -+ u32 ddramap ; -+ u32 ddrcust; -+ u32 ddrrdc; -+ u32 ddrspare; -+} volatile *DDR_t ; -+ -+enum -+{ -+ DDR0BASE_baseaddr_b = 16, -+ DDR0BASE_baseaddr_m = 0xffff0000, -+ -+ DDR0MASK_mask_b = 16, -+ DDR0MASK_mask_m = 0xffff0000, -+ -+ DDR1BASE_baseaddr_b = 16, -+ DDR1BASE_baseaddr_m = 0xffff0000, -+ -+ DDR1MASK_mask_b = 16, -+ DDR1MASK_mask_m = 0xffff0000, -+ -+ DDRC_ata_b = 5, -+ DDRC_ata_m = 0x000000E0, -+ DDRC_dbw_b = 8, -+ DDRC_dbw_m = 0x00000100, -+ DDRC_wr_b = 9, -+ DDRC_wr_m = 0x00000600, -+ DDRC_ps_b = 11, -+ DDRC_ps_m = 0x00001800, -+ DDRC_dtype_b = 13, -+ DDRC_dtype_m = 0x0000e000, -+ DDRC_rfc_b = 16, -+ DDRC_rfc_m = 0x000f0000, -+ DDRC_rp_b = 20, -+ DDRC_rp_m = 0x00300000, -+ DDRC_ap_b = 22, -+ DDRC_ap_m = 0x00400000, -+ DDRC_rcd_b = 23, -+ DDRC_rcd_m = 0x01800000, -+ DDRC_cl_b = 25, -+ DDRC_cl_m = 0x06000000, -+ DDRC_dbm_b = 27, -+ DDRC_dbm_m = 0x08000000, -+ DDRC_sds_b = 28, -+ DDRC_sds_m = 0x10000000, -+ DDRC_atp_b = 29, -+ DDRC_atp_m = 0x60000000, -+ DDRC_re_b = 31, -+ DDRC_re_m = 0x80000000, -+ -+ DDRRDC_ces_b = 0, -+ DDRRDC_ces_m = 0x00000001, -+ DDRRDC_ace_b = 1, -+ DDRRDC_ace_m = 0x00000002, -+ -+ DDRABASE_baseaddr_b = 16, -+ DDRABASE_baseaddr_m = 0xffff0000, -+ -+ DDRAMASK_mask_b = 16, -+ DDRAMASK_mask_m = 0xffff0000, -+ -+ DDRAMAP_map_b = 16, -+ DDRAMAP_map_m = 0xffff0000, -+ -+ DDRCUST_cs_b = 0, -+ DDRCUST_cs_m = 0x00000003, -+ DDRCUST_we_b = 2, -+ DDRCUST_we_m = 0x00000004, -+ DDRCUST_ras_b = 3, -+ DDRCUST_ras_m = 0x00000008, -+ DDRCUST_cas_b = 4, -+ DDRCUST_cas_m = 0x00000010, -+ DDRCUST_cke_b = 5, -+ DDRCUST_cke_m = 0x00000020, -+ DDRCUST_ba_b = 6, -+ DDRCUST_ba_m = 0x000000c0, -+ -+ RCOUNT_rcount_b = 0, -+ RCOUNT_rcount_m = 0x0000ffff, -+ -+ RCOMPARE_rcompare_b = 0, -+ RCOMPARE_rcompare_m = 0x0000ffff, -+ -+ RTC_ce_b = 0, -+ RTC_ce_m = 0x00000001, -+ RTC_to_b = 1, -+ RTC_to_m = 0x00000002, -+ RTC_rqe_b = 2, -+ RTC_rqe_m = 0x00000004, -+ -+ DDRDQSC_dm_b = 0, -+ DDRDQSC_dm_m = 0x00000003, -+ DDRDQSC_dqsbs_b = 2, -+ DDRDQSC_dqsbs_m = 0x000000fc, -+ DDRDQSC_db_b = 8, -+ DDRDQSC_db_m = 0x00000100, -+ DDRDQSC_dbsp_b = 9, -+ DDRDQSC_dbsp_m = 0x01fffe00, -+ DDRDQSC_bdp_b = 25, -+ DDRDQSC_bdp_m = 0x7e000000, -+ -+ DDRDLLC_eao_b = 0, -+ DDRDLLC_eao_m = 0x00000001, -+ DDRDLLC_eo_b = 1, -+ DDRDLLC_eo_m = 0x0000003e, -+ DDRDLLC_fs_b = 6, -+ DDRDLLC_fs_m = 0x000000c0, -+ DDRDLLC_as_b = 8, -+ DDRDLLC_as_m = 0x00000700, -+ DDRDLLC_sp_b = 11, -+ DDRDLLC_sp_m = 0x001ff800, -+ -+ DDRDLLFC_men_b = 0, -+ DDRDLLFC_men_m = 0x00000001, -+ DDRDLLFC_aen_b = 1, -+ DDRDLLFC_aen_m = 0x00000002, -+ DDRDLLFC_ff_b = 2, -+ DDRDLLFC_ff_m = 0x00000004, -+ -+ DDRDLLTA_addr_b = 2, -+ DDRDLLTA_addr_m = 0xfffffffc, -+ -+ DDRDLLED_dbe_b = 0, -+ DDRDLLED_dbe_m = 0x00000001, -+ DDRDLLED_dte_b = 1, -+ DDRDLLED_dte_m = 0x00000002, -+ -+ -+} ; -+ -+#endif // __IDT_DDR_H__ -diff -urN linux.old/include/asm-mips/rc32434/dma.h linux.dev/include/asm-mips/rc32434/dma.h ---- linux.old/include/asm-mips/rc32434/dma.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/dma.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,168 @@ -+#ifndef __IDT_DMA_H__ -+#define __IDT_DMA_H__ -+ -+/******************************************************************************* -+ * -+ * Copyright 2002 Integrated Device Technology, Inc. -+ * All rights reserved. -+ * -+ * DMA register definition. -+ * -+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $ -+ * -+ * Author : ryan.holmQVist@idt.com -+ * Date : 20011005 -+ * Update : -+ * $Log: dma.h,v $ -+ * Revision 1.3 2002/06/06 18:34:03 astichte -+ * Added XXX_PhysicalAddress and XXX_VirtualAddress -+ * -+ * Revision 1.2 2002/06/05 18:30:46 astichte -+ * Removed IDTField -+ * -+ * Revision 1.1 2002/05/29 17:33:21 sysarch -+ * jba File moved from vcode/include/idt/acacia -+ * -+ * -+ ******************************************************************************/ -+ -+enum -+{ -+ DMA0_PhysicalAddress = 0x18040000, -+ DMA_PhysicalAddress = DMA0_PhysicalAddress, // Default -+ -+ DMA0_VirtualAddress = 0xb8040000, -+ DMA_VirtualAddress = DMA0_VirtualAddress, // Default -+} ; -+ -+/* -+ * DMA descriptor (in physical memory). -+ */ -+ -+typedef struct DMAD_s -+{ -+ u32 control ; // Control. use DMAD_* -+ u32 ca ; // Current Address. -+ u32 devcs ; // Device control and status. -+ u32 link ; // Next descriptor in chain. -+} volatile *DMAD_t ; -+ -+enum -+{ -+ DMAD_size = sizeof (struct DMAD_s), -+ DMAD_count_b = 0, // in DMAD_t -> control -+ DMAD_count_m = 0x0003ffff, // in DMAD_t -> control -+ DMAD_ds_b = 20, // in DMAD_t -> control -+ DMAD_ds_m = 0x00300000, // in DMAD_t -> control -+ DMAD_ds_ethRcv_v = 0, -+ DMAD_ds_ethXmt_v = 0, -+ DMAD_ds_memToFifo_v = 0, -+ DMAD_ds_fifoToMem_v = 0, -+ DMAD_ds_pciToMem_v = 0, -+ DMAD_ds_memToPci_v = 0, -+ -+ DMAD_devcmd_b = 22, // in DMAD_t -> control -+ DMAD_devcmd_m = 0x01c00000, // in DMAD_t -> control -+ DMAD_devcmd_byte_v = 0, //memory-to-memory -+ DMAD_devcmd_halfword_v = 1, //memory-to-memory -+ DMAD_devcmd_word_v = 2, //memory-to-memory -+ DMAD_devcmd_2words_v = 3, //memory-to-memory -+ DMAD_devcmd_4words_v = 4, //memory-to-memory -+ DMAD_devcmd_6words_v = 5, //memory-to-memory -+ DMAD_devcmd_8words_v = 6, //memory-to-memory -+ DMAD_devcmd_16words_v = 7, //memory-to-memory -+ DMAD_cof_b = 25, // chain on finished -+ DMAD_cof_m = 0x02000000, // -+ DMAD_cod_b = 26, // chain on done -+ DMAD_cod_m = 0x04000000, // -+ DMAD_iof_b = 27, // interrupt on finished -+ DMAD_iof_m = 0x08000000, // -+ DMAD_iod_b = 28, // interrupt on done -+ DMAD_iod_m = 0x10000000, // -+ DMAD_t_b = 29, // terminated -+ DMAD_t_m = 0x20000000, // -+ DMAD_d_b = 30, // done -+ DMAD_d_m = 0x40000000, // -+ DMAD_f_b = 31, // finished -+ DMAD_f_m = 0x80000000, // -+} ; -+ -+/* -+ * DMA register (within Internal Register Map). -+ */ -+ -+struct DMA_Chan_s -+{ -+ u32 dmac ; // Control. -+ u32 dmas ; // Status. -+ u32 dmasm ; // Mask. -+ u32 dmadptr ; // Descriptor pointer. -+ u32 dmandptr ; // Next descriptor pointer. -+}; -+ -+typedef struct DMA_Chan_s volatile *DMA_Chan_t ; -+ -+//DMA_Channels use DMACH_count instead -+ -+enum -+{ -+ DMAC_run_b = 0, // -+ DMAC_run_m = 0x00000001, // -+ DMAC_dm_b = 1, // done mask -+ DMAC_dm_m = 0x00000002, // -+ DMAC_mode_b = 2, // -+ DMAC_mode_m = 0x0000000c, // -+ DMAC_mode_auto_v = 0, -+ DMAC_mode_burst_v = 1, -+ DMAC_mode_transfer_v = 2, //usually used -+ DMAC_mode_reserved_v = 3, -+ DMAC_a_b = 4, // -+ DMAC_a_m = 0x00000010, // -+ -+ DMAS_f_b = 0, // finished (sticky) -+ DMAS_f_m = 0x00000001, // -+ DMAS_d_b = 1, // done (sticky) -+ DMAS_d_m = 0x00000002, // -+ DMAS_c_b = 2, // chain (sticky) -+ DMAS_c_m = 0x00000004, // -+ DMAS_e_b = 3, // error (sticky) -+ DMAS_e_m = 0x00000008, // -+ DMAS_h_b = 4, // halt (sticky) -+ DMAS_h_m = 0x00000010, // -+ -+ DMASM_f_b = 0, // finished (1=mask) -+ DMASM_f_m = 0x00000001, // -+ DMASM_d_b = 1, // done (1=mask) -+ DMASM_d_m = 0x00000002, // -+ DMASM_c_b = 2, // chain (1=mask) -+ DMASM_c_m = 0x00000004, // -+ DMASM_e_b = 3, // error (1=mask) -+ DMASM_e_m = 0x00000008, // -+ DMASM_h_b = 4, // halt (1=mask) -+ DMASM_h_m = 0x00000010, // -+} ; -+ -+/* -+ * DMA channel definitions -+ */ -+ -+enum -+{ -+ DMACH_ethRcv = 0, -+ DMACH_ethXmt = 1, -+ DMACH_memToFifo = 2, -+ DMACH_fifoToMem = 3, -+ DMACH_pciToMem = 4, -+ DMACH_memToPci = 5, -+ -+ DMACH_count //must be last -+}; -+ -+ -+typedef struct DMAC_s -+{ -+ struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_] -+} volatile *DMA_t ; -+ -+#endif // __IDT_DMA_H__ -+ -diff -urN linux.old/include/asm-mips/rc32434/dma_v.h linux.dev/include/asm-mips/rc32434/dma_v.h ---- linux.old/include/asm-mips/rc32434/dma_v.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/dma_v.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,72 @@ -+#ifndef __IDT_DMA_V_H__ -+#define __IDT_DMA_V_H__ -+ -+/******************************************************************************* -+ * -+ * Copyright 2002 Integrated Device Technology, Inc. -+ * All rights reserved. -+ * -+ * DMA register definition. -+ * -+ * File : $Id: dma.h,v 1.3 2002/06/06 18:34:03 astichte Exp $ -+ * -+ * Author : ryan.holmQVist@idt.com -+ * Date : 20011005 -+ * Update : -+ * $Log: dma.h,v $ -+ * Revision 1.3 2002/06/06 18:34:03 astichte -+ * Added XXX_PhysicalAddress and XXX_VirtualAddress -+ * -+ * Revision 1.2 2002/06/05 18:30:46 astichte -+ * Removed IDTField -+ * -+ * Revision 1.1 2002/05/29 17:33:21 sysarch -+ * jba File moved from vcode/include/idt/acacia -+ * -+ * -+ ******************************************************************************/ -+#include -+#include -+#define DMA_CHAN_OFFSET 0x14 -+#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0) -+#define DMA_COUNT(count) \ -+ ((count) & DMAD_count_m) -+ -+#define DMA_HALT_TIMEOUT 500 -+ -+ -+static inline int rc32434_halt_dma(DMA_Chan_t ch) -+{ -+ int timeout=1; -+ if (local_readl(&ch->dmac) & DMAC_run_m) { -+ local_writel(0, &ch->dmac); -+ for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) { -+ if (local_readl(&ch->dmas) & DMAS_h_m) { -+ local_writel(0, &ch->dmas); -+ break; -+ } -+ } -+ } -+ -+ return timeout ? 0 : 1; -+} -+ -+static inline void rc32434_start_dma(DMA_Chan_t ch, u32 dma_addr) -+{ -+ local_writel(0, &ch->dmandptr); -+ local_writel(dma_addr, &ch->dmadptr); -+} -+ -+static inline void rc32434_chain_dma(DMA_Chan_t ch, u32 dma_addr) -+{ -+ local_writel(dma_addr, &ch->dmandptr); -+} -+ -+#endif // __IDT_DMA_V_H__ -+ -+ -+ -+ -+ -+ -+ -diff -urN linux.old/include/asm-mips/rc32434/eth.h linux.dev/include/asm-mips/rc32434/eth.h ---- linux.old/include/asm-mips/rc32434/eth.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/eth.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,320 @@ -+#ifndef __IDT_ETH_H__ -+#define __IDT_ETH_H__ -+ -+/******************************************************************************* -+ * -+ * Copyright 2002 Integrated Device Technology, Inc. -+ * All rights reserved. -+ * -+ * Ethernet register definition. -+ * -+ * File : $Id: eth.h,v 1.3 2002/06/06 18:34:04 astichte Exp $ -+ * -+ * Author : Allen.Stichter@idt.com -+ * Date : 20020605 -+ * Update : -+ * $Log: eth.h,v $ -+ * Revision 1.3 2002/06/06 18:34:04 astichte -+ * Added XXX_PhysicalAddress and XXX_VirtualAddress -+ * -+ * Revision 1.2 2002/06/05 18:19:46 astichte -+ * Added -+ * -+ * Revision 1.1 2002/05/29 17:33:22 sysarch -+ * jba File moved from vcode/include/idt/acacia -+ * -+ ******************************************************************************/ -+ -+enum -+{ -+ ETH0_PhysicalAddress = 0x18060000, -+ ETH_PhysicalAddress = ETH0_PhysicalAddress, // Default -+ -+ ETH0_VirtualAddress = 0xb8060000, -+ ETH_VirtualAddress = ETH0_VirtualAddress, // Default -+} ; -+ -+typedef struct -+{ -+ u32 ethintfc ; -+ u32 ethfifott ; -+ u32 etharc ; -+ u32 ethhash0 ; -+ u32 ethhash1 ; -+ u32 ethu0 [4] ; // Reserved. -+ u32 ethpfs ; -+ u32 ethmcp ; -+ u32 eth_u1 [10] ; // Reserved. -+ u32 ethspare ; -+ u32 eth_u2 [42] ; // Reserved. -+ u32 ethsal0 ; -+ u32 ethsah0 ; -+ u32 ethsal1 ; -+ u32 ethsah1 ; -+ u32 ethsal2 ; -+ u32 ethsah2 ; -+ u32 ethsal3 ; -+ u32 ethsah3 ; -+ u32 ethrbc ; -+ u32 ethrpc ; -+ u32 ethrupc ; -+ u32 ethrfc ; -+ u32 ethtbc ; -+ u32 ethgpf ; -+ u32 eth_u9 [50] ; // Reserved. -+ u32 ethmac1 ; -+ u32 ethmac2 ; -+ u32 ethipgt ; -+ u32 ethipgr ; -+ u32 ethclrt ; -+ u32 ethmaxf ; -+ u32 eth_u10 ; // Reserved. -+ u32 ethmtest ; -+ u32 miimcfg ; -+ u32 miimcmd ; -+ u32 miimaddr ; -+ u32 miimwtd ; -+ u32 miimrdd ; -+ u32 miimind ; -+ u32 eth_u11 ; // Reserved. -+ u32 eth_u12 ; // Reserved. -+ u32 ethcfsa0 ; -+ u32 ethcfsa1 ; -+ u32 ethcfsa2 ; -+} volatile *ETH_t; -+ -+enum -+{ -+ ETHINTFC_en_b = 0, -+ ETHINTFC_en_m = 0x00000001, -+ ETHINTFC_its_b = 1, -+ ETHINTFC_its_m = 0x00000002, -+ ETHINTFC_rip_b = 2, -+ ETHINTFC_rip_m = 0x00000004, -+ ETHINTFC_jam_b = 3, -+ ETHINTFC_jam_m = 0x00000008, -+ ETHINTFC_ovr_b = 4, -+ ETHINTFC_ovr_m = 0x00000010, -+ ETHINTFC_und_b = 5, -+ ETHINTFC_und_m = 0x00000020, -+ ETHINTFC_iom_b = 6, -+ ETHINTFC_iom_m = 0x000000c0, -+ -+ ETHFIFOTT_tth_b = 0, -+ ETHFIFOTT_tth_m = 0x0000007f, -+ -+ ETHARC_pro_b = 0, -+ ETHARC_pro_m = 0x00000001, -+ ETHARC_am_b = 1, -+ ETHARC_am_m = 0x00000002, -+ ETHARC_afm_b = 2, -+ ETHARC_afm_m = 0x00000004, -+ ETHARC_ab_b = 3, -+ ETHARC_ab_m = 0x00000008, -+ -+ ETHSAL_byte5_b = 0, -+ ETHSAL_byte5_m = 0x000000ff, -+ ETHSAL_byte4_b = 8, -+ ETHSAL_byte4_m = 0x0000ff00, -+ ETHSAL_byte3_b = 16, -+ ETHSAL_byte3_m = 0x00ff0000, -+ ETHSAL_byte2_b = 24, -+ ETHSAL_byte2_m = 0xff000000, -+ -+ ETHSAH_byte1_b = 0, -+ ETHSAH_byte1_m = 0x000000ff, -+ ETHSAH_byte0_b = 8, -+ ETHSAH_byte0_m = 0x0000ff00, -+ -+ ETHGPF_ptv_b = 0, -+ ETHGPF_ptv_m = 0x0000ffff, -+ -+ ETHPFS_pfd_b = 0, -+ ETHPFS_pfd_m = 0x00000001, -+ -+ ETHCFSA0_cfsa4_b = 0, -+ ETHCFSA0_cfsa4_m = 0x000000ff, -+ ETHCFSA0_cfsa5_b = 8, -+ ETHCFSA0_cfsa5_m = 0x0000ff00, -+ -+ ETHCFSA1_cfsa2_b = 0, -+ ETHCFSA1_cfsa2_m = 0x000000ff, -+ ETHCFSA1_cfsa3_b = 8, -+ ETHCFSA1_cfsa3_m = 0x0000ff00, -+ -+ ETHCFSA2_cfsa0_b = 0, -+ ETHCFSA2_cfsa0_m = 0x000000ff, -+ ETHCFSA2_cfsa1_b = 8, -+ ETHCFSA2_cfsa1_m = 0x0000ff00, -+ -+ ETHMAC1_re_b = 0, -+ ETHMAC1_re_m = 0x00000001, -+ ETHMAC1_paf_b = 1, -+ ETHMAC1_paf_m = 0x00000002, -+ ETHMAC1_rfc_b = 2, -+ ETHMAC1_rfc_m = 0x00000004, -+ ETHMAC1_tfc_b = 3, -+ ETHMAC1_tfc_m = 0x00000008, -+ ETHMAC1_lb_b = 4, -+ ETHMAC1_lb_m = 0x00000010, -+ ETHMAC1_mr_b = 31, -+ ETHMAC1_mr_m = 0x80000000, -+ -+ ETHMAC2_fd_b = 0, -+ ETHMAC2_fd_m = 0x00000001, -+ ETHMAC2_flc_b = 1, -+ ETHMAC2_flc_m = 0x00000002, -+ ETHMAC2_hfe_b = 2, -+ ETHMAC2_hfe_m = 0x00000004, -+ ETHMAC2_dc_b = 3, -+ ETHMAC2_dc_m = 0x00000008, -+ ETHMAC2_cen_b = 4, -+ ETHMAC2_cen_m = 0x00000010, -+ ETHMAC2_pe_b = 5, -+ ETHMAC2_pe_m = 0x00000020, -+ ETHMAC2_vpe_b = 6, -+ ETHMAC2_vpe_m = 0x00000040, -+ ETHMAC2_ape_b = 7, -+ ETHMAC2_ape_m = 0x00000080, -+ ETHMAC2_ppe_b = 8, -+ ETHMAC2_ppe_m = 0x00000100, -+ ETHMAC2_lpe_b = 9, -+ ETHMAC2_lpe_m = 0x00000200, -+ ETHMAC2_nb_b = 12, -+ ETHMAC2_nb_m = 0x00001000, -+ ETHMAC2_bp_b = 13, -+ ETHMAC2_bp_m = 0x00002000, -+ ETHMAC2_ed_b = 14, -+ ETHMAC2_ed_m = 0x00004000, -+ -+ ETHIPGT_ipgt_b = 0, -+ ETHIPGT_ipgt_m = 0x0000007f, -+ -+ ETHIPGR_ipgr2_b = 0, -+ ETHIPGR_ipgr2_m = 0x0000007f, -+ ETHIPGR_ipgr1_b = 8, -+ ETHIPGR_ipgr1_m = 0x00007f00, -+ -+ ETHCLRT_maxret_b = 0, -+ ETHCLRT_maxret_m = 0x0000000f, -+ ETHCLRT_colwin_b = 8, -+ ETHCLRT_colwin_m = 0x00003f00, -+ -+ ETHMAXF_maxf_b = 0, -+ ETHMAXF_maxf_m = 0x0000ffff, -+ -+ ETHMTEST_tb_b = 2, -+ ETHMTEST_tb_m = 0x00000004, -+ -+ ETHMCP_div_b = 0, -+ ETHMCP_div_m = 0x000000ff, -+ -+ MIIMCFG_rsv_b = 0, -+ MIIMCFG_rsv_m = 0x0000000c, -+ -+ MIIMCMD_rd_b = 0, -+ MIIMCMD_rd_m = 0x00000001, -+ MIIMCMD_scn_b = 1, -+ MIIMCMD_scn_m = 0x00000002, -+ -+ MIIMADDR_regaddr_b = 0, -+ MIIMADDR_regaddr_m = 0x0000001f, -+ MIIMADDR_phyaddr_b = 8, -+ MIIMADDR_phyaddr_m = 0x00001f00, -+ -+ MIIMWTD_wdata_b = 0, -+ MIIMWTD_wdata_m = 0x0000ffff, -+ -+ MIIMRDD_rdata_b = 0, -+ MIIMRDD_rdata_m = 0x0000ffff, -+ -+ MIIMIND_bsy_b = 0, -+ MIIMIND_bsy_m = 0x00000001, -+ MIIMIND_scn_b = 1, -+ MIIMIND_scn_m = 0x00000002, -+ MIIMIND_nv_b = 2, -+ MIIMIND_nv_m = 0x00000004, -+ -+} ; -+ -+/* -+ * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors. -+ */ -+enum -+{ -+ ETHRX_fd_b = 0, -+ ETHRX_fd_m = 0x00000001, -+ ETHRX_ld_b = 1, -+ ETHRX_ld_m = 0x00000002, -+ ETHRX_rok_b = 2, -+ ETHRX_rok_m = 0x00000004, -+ ETHRX_fm_b = 3, -+ ETHRX_fm_m = 0x00000008, -+ ETHRX_mp_b = 4, -+ ETHRX_mp_m = 0x00000010, -+ ETHRX_bp_b = 5, -+ ETHRX_bp_m = 0x00000020, -+ ETHRX_vlt_b = 6, -+ ETHRX_vlt_m = 0x00000040, -+ ETHRX_cf_b = 7, -+ ETHRX_cf_m = 0x00000080, -+ ETHRX_ovr_b = 8, -+ ETHRX_ovr_m = 0x00000100, -+ ETHRX_crc_b = 9, -+ ETHRX_crc_m = 0x00000200, -+ ETHRX_cv_b = 10, -+ ETHRX_cv_m = 0x00000400, -+ ETHRX_db_b = 11, -+ ETHRX_db_m = 0x00000800, -+ ETHRX_le_b = 12, -+ ETHRX_le_m = 0x00001000, -+ ETHRX_lor_b = 13, -+ ETHRX_lor_m = 0x00002000, -+ ETHRX_ces_b = 14, -+ ETHRX_ces_m = 0x00004000, -+ ETHRX_length_b = 16, -+ ETHRX_length_m = 0xffff0000, -+ -+ ETHTX_fd_b = 0, -+ ETHTX_fd_m = 0x00000001, -+ ETHTX_ld_b = 1, -+ ETHTX_ld_m = 0x00000002, -+ ETHTX_oen_b = 2, -+ ETHTX_oen_m = 0x00000004, -+ ETHTX_pen_b = 3, -+ ETHTX_pen_m = 0x00000008, -+ ETHTX_cen_b = 4, -+ ETHTX_cen_m = 0x00000010, -+ ETHTX_hen_b = 5, -+ ETHTX_hen_m = 0x00000020, -+ ETHTX_tok_b = 6, -+ ETHTX_tok_m = 0x00000040, -+ ETHTX_mp_b = 7, -+ ETHTX_mp_m = 0x00000080, -+ ETHTX_bp_b = 8, -+ ETHTX_bp_m = 0x00000100, -+ ETHTX_und_b = 9, -+ ETHTX_und_m = 0x00000200, -+ ETHTX_of_b = 10, -+ ETHTX_of_m = 0x00000400, -+ ETHTX_ed_b = 11, -+ ETHTX_ed_m = 0x00000800, -+ ETHTX_ec_b = 12, -+ ETHTX_ec_m = 0x00001000, -+ ETHTX_lc_b = 13, -+ ETHTX_lc_m = 0x00002000, -+ ETHTX_td_b = 14, -+ ETHTX_td_m = 0x00004000, -+ ETHTX_crc_b = 15, -+ ETHTX_crc_m = 0x00008000, -+ ETHTX_le_b = 16, -+ ETHTX_le_m = 0x00010000, -+ ETHTX_cc_b = 17, -+ ETHTX_cc_m = 0x001E0000, -+} ; -+ -+#endif // __IDT_ETH_H__ -+ -+ -+ -+ -diff -urN linux.old/include/asm-mips/rc32434/eth_v.h linux.dev/include/asm-mips/rc32434/eth_v.h ---- linux.old/include/asm-mips/rc32434/eth_v.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/eth_v.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,63 @@ -+#ifndef __IDT_ETH_V_H__ -+#define __IDT_ETH_V_H__ -+ -+/******************************************************************************* -+ * -+ * Copyright 2002 Integrated Device Technology, Inc. -+ * All rights reserved. -+ * -+ * Ethernet register definition. -+ * -+ * File : $Id: eth.h,v 1.3 2002/06/06 18:34:04 astichte Exp $ -+ * -+ * Author : Allen.Stichter@idt.com -+ * Date : 20020605 -+ * Update : -+ * $Log: eth.h,v $ -+ * Revision 1.3 2002/06/06 18:34:04 astichte -+ * Added XXX_PhysicalAddress and XXX_VirtualAddress -+ * -+ * Revision 1.2 2002/06/05 18:19:46 astichte -+ * Added -+ * -+ * Revision 1.1 2002/05/29 17:33:22 sysarch -+ * jba File moved from vcode/include/idt/acacia -+ * -+ ******************************************************************************/ -+ -+#include -+ -+#define IS_TX_TOK(X) (((X) & (1<> ETHTX_tok_b ) /* Transmit Okay */ -+#define IS_TX_MP(X) (((X) & (1<> ETHTX_mp_b ) /* Multicast */ -+#define IS_TX_BP(X) (((X) & (1<> ETHTX_bp_b ) /* Broadcast */ -+#define IS_TX_UND_ERR(X) (((X) & (1<> ETHTX_und_b ) /* Transmit FIFO Underflow */ -+#define IS_TX_OF_ERR(X) (((X) & (1<> ETHTX_of_b ) /* Oversized frame */ -+#define IS_TX_ED_ERR(X) (((X) & (1<> ETHTX_ed_b ) /* Excessive deferral */ -+#define IS_TX_EC_ERR(X) (((X) & (1<> ETHTX_ec_b) /* Excessive collisions */ -+#define IS_TX_LC_ERR(X) (((X) & (1<> ETHTX_lc_b ) /* Late Collision */ -+#define IS_TX_TD_ERR(X) (((X) & (1<> ETHTX_td_b ) /* Transmit deferred*/ -+#define IS_TX_CRC_ERR(X) (((X) & (1<> ETHTX_crc_b ) /* CRC Error */ -+#define IS_TX_LE_ERR(X) (((X) & (1<> ETHTX_le_b ) /* Length Error */ -+ -+#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b) /* Collision Count */ -+ -+#define IS_RCV_ROK(X) (((X) & (1<> ETHRX_rok_b) /* Receive Okay */ -+#define IS_RCV_FM(X) (((X) & (1<> ETHRX_fm_b) /* Is Filter Match */ -+#define IS_RCV_MP(X) (((X) & (1<> ETHRX_mp_b) /* Is it MP */ -+#define IS_RCV_BP(X) (((X) & (1<> ETHRX_bp_b) /* Is it BP */ -+#define IS_RCV_VLT(X) (((X) & (1<> ETHRX_vlt_b) /* VLAN Tag Detect */ -+#define IS_RCV_CF(X) (((X) & (1<> ETHRX_cf_b) /* Control Frame */ -+#define IS_RCV_OVR_ERR(X) (((X) & (1<> ETHRX_ovr_b) /* Receive Overflow */ -+#define IS_RCV_CRC_ERR(X) (((X) & (1<> ETHRX_crc_b) /* CRC Error */ -+#define IS_RCV_CV_ERR(X) (((X) & (1<> ETHRX_cv_b) /* Code Violation */ -+#define IS_RCV_DB_ERR(X) (((X) & (1<> ETHRX_db_b) /* Dribble Bits */ -+#define IS_RCV_LE_ERR(X) (((X) & (1<> ETHRX_le_b) /* Length error */ -+#define IS_RCV_LOR_ERR(X) (((X) & (1<> ETHRX_lor_b) /* Length Out of Range */ -+#define IS_RCV_CES_ERR(X) (((X) & (1<> ETHRX_ces_b) /* Preamble error */ -+#define RCVPKT_LENGTH(X) (((X) & ETHRX_length_m) >> ETHRX_length_b) /* Length of the received packet */ -+#endif // __IDT_ETH_V_H__ -+ -+ -+ -+ -+ -diff -urN linux.old/include/asm-mips/rc32434/gpio.h linux.dev/include/asm-mips/rc32434/gpio.h ---- linux.old/include/asm-mips/rc32434/gpio.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/gpio.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,181 @@ -+#ifndef __IDT_GPIO_H__ -+#define __IDT_GPIO_H__ -+ -+/******************************************************************************* -+ * -+ * Copyright 2002 Integrated Device Technology, Inc. -+ * All rights reserved. -+ * -+ * GPIO register definition. -+ * -+ * File : $Id: gpio.h,v 1.2 2002/06/06 18:34:04 astichte Exp $ -+ * -+ * Author : ryan.holmQVist@idt.com -+ * Date : 20011005 -+ * Update : -+ * $Log: gpio.h,v $ -+ * Revision 1.2 2002/06/06 18:34:04 astichte -+ * Added XXX_PhysicalAddress and XXX_VirtualAddress -+ * -+ * Revision 1.1 2002/05/29 17:33:22 sysarch -+ * jba File moved from vcode/include/idt/acacia -+ * -+ * -+ ******************************************************************************/ -+ -+enum -+{ -+ GPIO0_PhysicalAddress = 0x18050000, -+ GPIO_PhysicalAddress = GPIO0_PhysicalAddress, // Default -+ -+ GPIO0_VirtualAddress = 0xb8050000, -+ GPIO_VirtualAddress = GPIO0_VirtualAddress, // Default -+} ; -+ -+typedef struct -+{ -+ u32 gpiofunc; /* GPIO Function Register -+ * gpiofunc[x]==0 bit = gpio -+ * func[x]==1 bit = altfunc -+ */ -+ u32 gpiocfg; /* GPIO Configuration Register -+ * gpiocfg[x]==0 bit = input -+ * gpiocfg[x]==1 bit = output -+ */ -+ u32 gpiod; /* GPIO Data Register -+ * gpiod[x] read/write gpio pinX status -+ */ -+ u32 gpioilevel; /* GPIO Interrupt Status Register -+ * interrupt level (see gpioistat) -+ */ -+ u32 gpioistat; /* Gpio Interrupt Status Register -+ * istat[x] = (gpiod[x] == level[x]) -+ * cleared in ISR (STICKY bits) -+ */ -+ u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */ -+} volatile * GPIO_t ; -+ -+typedef enum -+{ -+ GPIO_gpio_v = 0, // gpiofunc use pin as GPIO. -+ GPIO_alt_v = 1, // gpiofunc use pin as alt. -+ GPIO_input_v = 0, // gpiocfg use pin as input. -+ GPIO_output_v = 1, // gpiocfg use pin as output. -+ GPIO_pin0_b = 0, -+ GPIO_pin0_m = 0x00000001, -+ GPIO_pin1_b = 1, -+ GPIO_pin1_m = 0x00000002, -+ GPIO_pin2_b = 2, -+ GPIO_pin2_m = 0x00000004, -+ GPIO_pin3_b = 3, -+ GPIO_pin3_m = 0x00000008, -+ GPIO_pin4_b = 4, -+ GPIO_pin4_m = 0x00000010, -+ GPIO_pin5_b = 5, -+ GPIO_pin5_m = 0x00000020, -+ GPIO_pin6_b = 6, -+ GPIO_pin6_m = 0x00000040, -+ GPIO_pin7_b = 7, -+ GPIO_pin7_m = 0x00000080, -+ GPIO_pin8_b = 8, -+ GPIO_pin8_m = 0x00000100, -+ GPIO_pin9_b = 9, -+ GPIO_pin9_m = 0x00000200, -+ GPIO_pin10_b = 10, -+ GPIO_pin10_m = 0x00000400, -+ GPIO_pin11_b = 11, -+ GPIO_pin11_m = 0x00000800, -+ GPIO_pin12_b = 12, -+ GPIO_pin12_m = 0x00001000, -+ GPIO_pin13_b = 13, -+ GPIO_pin13_m = 0x00002000, -+ GPIO_pin14_b = 14, -+ GPIO_pin14_m = 0x00004000, -+ GPIO_pin15_b = 15, -+ GPIO_pin15_m = 0x00008000, -+ GPIO_pin16_b = 16, -+ GPIO_pin16_m = 0x00010000, -+ GPIO_pin17_b = 17, -+ GPIO_pin17_m = 0x00020000, -+ GPIO_pin18_b = 18, -+ GPIO_pin18_m = 0x00040000, -+ GPIO_pin19_b = 19, -+ GPIO_pin19_m = 0x00080000, -+ GPIO_pin20_b = 20, -+ GPIO_pin20_m = 0x00100000, -+ GPIO_pin21_b = 21, -+ GPIO_pin21_m = 0x00200000, -+ GPIO_pin22_b = 22, -+ GPIO_pin22_m = 0x00400000, -+ GPIO_pin23_b = 23, -+ GPIO_pin23_m = 0x00800000, -+ GPIO_pin24_b = 24, -+ GPIO_pin24_m = 0x01000000, -+ GPIO_pin25_b = 25, -+ GPIO_pin25_m = 0x02000000, -+ GPIO_pin26_b = 26, -+ GPIO_pin26_m = 0x04000000, -+ GPIO_pin27_b = 27, -+ GPIO_pin27_m = 0x08000000, -+ GPIO_pin28_b = 28, -+ GPIO_pin28_m = 0x10000000, -+ GPIO_pin29_b = 29, -+ GPIO_pin29_m = 0x20000000, -+ GPIO_pin30_b = 30, -+ GPIO_pin30_m = 0x40000000, -+ GPIO_pin31_b = 31, -+ GPIO_pin31_m = 0x80000000, -+ -+// Alternate function pins. Corrsponding gpiofunc bit set to GPIO_alt_v. -+ -+ GPIO_u0sout_b = GPIO_pin0_b, // UART 0 serial out. -+ GPIO_u0sout_m = GPIO_pin0_m, -+ GPIO_u0sout_cfg_v = GPIO_output_v, -+ GPIO_u0sinp_b = GPIO_pin1_b, // UART 0 serial in. -+ GPIO_u0sinp_m = GPIO_pin1_m, -+ GPIO_u0sinp_cfg_v = GPIO_input_v, -+ GPIO_u0rtsn_b = GPIO_pin2_b, // UART 0 req. to send. -+ GPIO_u0rtsn_m = GPIO_pin2_m, -+ GPIO_u0rtsn_cfg_v = GPIO_output_v, -+ GPIO_u0ctsn_b = GPIO_pin3_b, // UART 0 clear to send. -+ GPIO_u0ctsn_m = GPIO_pin3_m, -+ GPIO_u0ctsn_cfg_v = GPIO_input_v, -+ GPIO_maddr22_b = GPIO_pin4_b, // M&P bus bit 22. -+ GPIO_maddr22_m = GPIO_pin4_m, -+ GPIO_maddr22_cfg_v = GPIO_output_v, -+ -+ GPIO_maddr23_b = GPIO_pin5_b, // M&P bus bit 23. -+ GPIO_maddr23_m = GPIO_pin5_m, -+ GPIO_maddr23_cfg_v = GPIO_output_v, -+ -+ GPIO_maddr24_b = GPIO_pin6_b, // M&P bus bit 24. -+ GPIO_maddr24_m = GPIO_pin6_m, -+ GPIO_maddr24_cfg_v = GPIO_output_v, -+ -+ GPIO_maddr25_b = GPIO_pin7_b, // M&P bus bit 25. -+ GPIO_maddr25_m = GPIO_pin7_m, -+ GPIO_maddr25_cfg_v = GPIO_output_v, -+ -+ GPIO_cpu_b = GPIO_pin8_b, // M&P bus bit 25. -+ GPIO_cpu_m = GPIO_pin8_m, -+ GPIO_cpu_cfg_v = GPIO_output_v, -+ GPIO_afspare6_b = GPIO_pin9_b, // reserved. -+ GPIO_afspare6_m = GPIO_pin9_m, -+ GPIO_afspare6_cfg_v = GPIO_input_v, -+ GPIO_afspare4_b = GPIO_pin10_b, // reserved. -+ GPIO_afspare4_m = GPIO_pin10_m, -+ GPIO_afspare4_cfg_v = GPIO_input_v, -+ GPIO_afspare3_b = GPIO_pin11_b, // reserved. -+ GPIO_afspare3_m = GPIO_pin11_m, -+ GPIO_afspare3_cfg_v = GPIO_input_v, -+ GPIO_afspare2_b = GPIO_pin12_b, // reserved. -+ GPIO_afspare2_m = GPIO_pin12_m, -+ GPIO_afspare2_cfg_v = GPIO_input_v, -+ GPIO_pcimuintn_b = GPIO_pin13_b, // PCI messaging int. -+ GPIO_pcimuintn_m = GPIO_pin13_m, -+ GPIO_pcimuintn_cfg_v = GPIO_output_v, -+ -+} GPIO_DEFS_t; -+ -+#endif // __IDT_GPIO_H__ -+ -diff -urN linux.old/include/asm-mips/rc32434/irq.h linux.dev/include/asm-mips/rc32434/irq.h ---- linux.old/include/asm-mips/rc32434/irq.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/irq.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,8 @@ -+#ifndef __ASM_MACH_MIPS_IRQ_H -+#define __ASM_MACH_MIPS_IRQ_H -+ -+#include -+ -+#define NR_IRQS 256 -+ -+#endif /* __ASM_MACH_MIPS_IRQ_H */ -diff -urN linux.old/include/asm-mips/rc32434/pci.h linux.dev/include/asm-mips/rc32434/pci.h ---- linux.old/include/asm-mips/rc32434/pci.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/pci.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,692 @@ -+/************************************************************************** -+ * -+ * BRIEF MODULE DESCRIPTION -+ * PCI register definitio -+ * -+ * Copyright 2004 IDT Inc. (rischelp@idt.com) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ ************************************************************************** -+ * May 2004 rkt, neb. -+ * -+ * Initial Release -+ * -+ * -+ * -+ ************************************************************************** -+ */ -+ -+#ifndef __IDT_PCI_H__ -+#define __IDT_PCI_H__ -+ -+enum -+{ -+ PCI0_PhysicalAddress = 0x18080000, -+ PCI_PhysicalAddress = PCI0_PhysicalAddress, -+ -+ PCI0_VirtualAddress = 0xB8080000, -+ PCI_VirtualAddress = PCI0_VirtualAddress, -+} ; -+ -+enum -+{ -+ PCI_LbaCount = 4, // Local base addresses. -+} ; -+ -+typedef struct -+{ -+ u32 a ; // Address. -+ u32 c ; // Control. -+ u32 m ; // mapping. -+} PCI_Map_s ; -+ -+typedef struct -+{ -+ u32 pcic ; -+ u32 pcis ; -+ u32 pcism ; -+ u32 pcicfga ; -+ u32 pcicfgd ; -+ PCI_Map_s pcilba [PCI_LbaCount] ; -+ u32 pcidac ; -+ u32 pcidas ; -+ u32 pcidasm ; -+ u32 pcidad ; -+ u32 pcidma8c ; -+ u32 pcidma9c ; -+ u32 pcitc ; -+} volatile *PCI_t ; -+ -+// PCI messaging unit. -+enum -+{ -+ PCIM_Count = 2, -+} ; -+typedef struct -+{ -+ u32 pciim [PCIM_Count] ; -+ u32 pciom [PCIM_Count] ; -+ u32 pciid ; -+ u32 pciiic ; -+ u32 pciiim ; -+ u32 pciiod ; -+ u32 pciioic ; -+ u32 pciioim ; -+} volatile *PCIM_t ; -+ -+/******************************************************************************* -+ * -+ * PCI Control Register -+ * -+ ******************************************************************************/ -+enum -+{ -+ PCIC_en_b = 0, -+ PCIC_en_m = 0x00000001, -+ PCIC_tnr_b = 1, -+ PCIC_tnr_m = 0x00000002, -+ PCIC_sce_b = 2, -+ PCIC_sce_m = 0x00000004, -+ PCIC_ien_b = 3, -+ PCIC_ien_m = 0x00000008, -+ PCIC_aaa_b = 4, -+ PCIC_aaa_m = 0x00000010, -+ PCIC_eap_b = 5, -+ PCIC_eap_m = 0x00000020, -+ PCIC_pcim_b = 6, -+ PCIC_pcim_m = 0x000001c0, -+ PCIC_pcim_disabled_v = 0, -+ PCIC_pcim_tnr_v = 1, // Satellite - target not ready -+ PCIC_pcim_suspend_v = 2, // Satellite - suspended CPU. -+ PCIC_pcim_extern_v = 3, // Host - external arbiter. -+ PCIC_pcim_fixed_v = 4, // Host - fixed priority arb. -+ PCIC_pcim_roundrobin_v = 5, // Host - round robin priority. -+ PCIC_pcim_reserved6_v = 6, -+ PCIC_pcim_reserved7_v = 7, -+ PCIC_igm_b = 9, -+ PCIC_igm_m = 0x00000200, -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI Status Register -+ * -+ ******************************************************************************/ -+enum { -+ PCIS_eed_b = 0, -+ PCIS_eed_m = 0x00000001, -+ PCIS_wr_b = 1, -+ PCIS_wr_m = 0x00000002, -+ PCIS_nmi_b = 2, -+ PCIS_nmi_m = 0x00000004, -+ PCIS_ii_b = 3, -+ PCIS_ii_m = 0x00000008, -+ PCIS_cwe_b = 4, -+ PCIS_cwe_m = 0x00000010, -+ PCIS_cre_b = 5, -+ PCIS_cre_m = 0x00000020, -+ PCIS_mdpe_b = 6, -+ PCIS_mdpe_m = 0x00000040, -+ PCIS_sta_b = 7, -+ PCIS_sta_m = 0x00000080, -+ PCIS_rta_b = 8, -+ PCIS_rta_m = 0x00000100, -+ PCIS_rma_b = 9, -+ PCIS_rma_m = 0x00000200, -+ PCIS_sse_b = 10, -+ PCIS_sse_m = 0x00000400, -+ PCIS_ose_b = 11, -+ PCIS_ose_m = 0x00000800, -+ PCIS_pe_b = 12, -+ PCIS_pe_m = 0x00001000, -+ PCIS_tae_b = 13, -+ PCIS_tae_m = 0x00002000, -+ PCIS_rle_b = 14, -+ PCIS_rle_m = 0x00004000, -+ PCIS_bme_b = 15, -+ PCIS_bme_m = 0x00008000, -+ PCIS_prd_b = 16, -+ PCIS_prd_m = 0x00010000, -+ PCIS_rip_b = 17, -+ PCIS_rip_m = 0x00020000, -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI Status Mask Register -+ * -+ ******************************************************************************/ -+enum { -+ PCISM_eed_b = 0, -+ PCISM_eed_m = 0x00000001, -+ PCISM_wr_b = 1, -+ PCISM_wr_m = 0x00000002, -+ PCISM_nmi_b = 2, -+ PCISM_nmi_m = 0x00000004, -+ PCISM_ii_b = 3, -+ PCISM_ii_m = 0x00000008, -+ PCISM_cwe_b = 4, -+ PCISM_cwe_m = 0x00000010, -+ PCISM_cre_b = 5, -+ PCISM_cre_m = 0x00000020, -+ PCISM_mdpe_b = 6, -+ PCISM_mdpe_m = 0x00000040, -+ PCISM_sta_b = 7, -+ PCISM_sta_m = 0x00000080, -+ PCISM_rta_b = 8, -+ PCISM_rta_m = 0x00000100, -+ PCISM_rma_b = 9, -+ PCISM_rma_m = 0x00000200, -+ PCISM_sse_b = 10, -+ PCISM_sse_m = 0x00000400, -+ PCISM_ose_b = 11, -+ PCISM_ose_m = 0x00000800, -+ PCISM_pe_b = 12, -+ PCISM_pe_m = 0x00001000, -+ PCISM_tae_b = 13, -+ PCISM_tae_m = 0x00002000, -+ PCISM_rle_b = 14, -+ PCISM_rle_m = 0x00004000, -+ PCISM_bme_b = 15, -+ PCISM_bme_m = 0x00008000, -+ PCISM_prd_b = 16, -+ PCISM_prd_m = 0x00010000, -+ PCISM_rip_b = 17, -+ PCISM_rip_m = 0x00020000, -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI Configuration Address Register -+ * -+ ******************************************************************************/ -+enum { -+ PCICFGA_reg_b = 2, -+ PCICFGA_reg_m = 0x000000fc, -+ PCICFGA_reg_id_v = 0x00>>2, //use PCFGID_ -+ PCICFGA_reg_04_v = 0x04>>2, //use PCFG04_ -+ PCICFGA_reg_08_v = 0x08>>2, //use PCFG08_ -+ PCICFGA_reg_0C_v = 0x0C>>2, //use PCFG0C_ -+ PCICFGA_reg_pba0_v = 0x10>>2, //use PCIPBA_ -+ PCICFGA_reg_pba1_v = 0x14>>2, //use PCIPBA_ -+ PCICFGA_reg_pba2_v = 0x18>>2, //use PCIPBA_ -+ PCICFGA_reg_pba3_v = 0x1c>>2, //use PCIPBA_ -+ PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_ -+ PCICFGA_reg_3C_v = 0x3C>>2, //use PCFG3C_ -+ PCICFGA_reg_pba0c_v = 0x44>>2, //use PCIPBAC_ -+ PCICFGA_reg_pba0m_v = 0x48>>2, -+ PCICFGA_reg_pba1c_v = 0x4c>>2, //use PCIPBAC_ -+ PCICFGA_reg_pba1m_v = 0x50>>2, -+ PCICFGA_reg_pba2c_v = 0x54>>2, //use PCIPBAC_ -+ PCICFGA_reg_pba2m_v = 0x58>>2, -+ PCICFGA_reg_pba3c_v = 0x5c>>2, //use PCIPBAC_ -+ PCICFGA_reg_pba3m_v = 0x60>>2, -+ PCICFGA_reg_pmgt_v = 0x64>>2, -+ PCICFGA_func_b = 8, -+ PCICFGA_func_m = 0x00000700, -+ PCICFGA_dev_b = 11, -+ PCICFGA_dev_m = 0x0000f800, -+ PCICFGA_dev_internal_v = 0, -+ PCICFGA_bus_b = 16, -+ PCICFGA_bus_m = 0x00ff0000, -+ PCICFGA_bus_type0_v = 0, //local bus -+ PCICFGA_en_b = 31, // read only -+ PCICFGA_en_m = 0x80000000, -+} ; -+ -+enum { -+ PCFGID_vendor_b = 0, -+ PCFGID_vendor_m = 0x0000ffff, -+ PCFGID_vendor_IDT_v = 0x111d, -+ PCFGID_device_b = 16, -+ PCFGID_device_m = 0xffff0000, -+ PCFGID_device_Korinade_v = 0x0214, -+ -+ PCFG04_command_ioena_b = 1, -+ PCFG04_command_ioena_m = 0x00000001, -+ PCFG04_command_memena_b = 2, -+ PCFG04_command_memena_m = 0x00000002, -+ PCFG04_command_bmena_b = 3, -+ PCFG04_command_bmena_m = 0x00000004, -+ PCFG04_command_mwinv_b = 5, -+ PCFG04_command_mwinv_m = 0x00000010, -+ PCFG04_command_parena_b = 7, -+ PCFG04_command_parena_m = 0x00000040, -+ PCFG04_command_serrena_b = 9, -+ PCFG04_command_serrena_m = 0x00000100, -+ PCFG04_command_fastbbena_b = 10, -+ PCFG04_command_fastbbena_m = 0x00000200, -+ PCFG04_status_b = 16, -+ PCFG04_status_m = 0xffff0000, -+ PCFG04_status_66MHz_b = 21, // 66 MHz enable -+ PCFG04_status_66MHz_m = 0x00200000, -+ PCFG04_status_fbb_b = 23, -+ PCFG04_status_fbb_m = 0x00800000, -+ PCFG04_status_mdpe_b = 24, -+ PCFG04_status_mdpe_m = 0x01000000, -+ PCFG04_status_dst_b = 25, -+ PCFG04_status_dst_m = 0x06000000, -+ PCFG04_status_sta_b = 27, -+ PCFG04_status_sta_m = 0x08000000, -+ PCFG04_status_rta_b = 28, -+ PCFG04_status_rta_m = 0x10000000, -+ PCFG04_status_rma_b = 29, -+ PCFG04_status_rma_m = 0x20000000, -+ PCFG04_status_sse_b = 30, -+ PCFG04_status_sse_m = 0x40000000, -+ PCFG04_status_pe_b = 31, -+ PCFG04_status_pe_m = 0x40000000, -+ -+ PCFG08_revId_b = 0, -+ PCFG08_revId_m = 0x000000ff, -+ PCFG08_classCode_b = 0, -+ PCFG08_classCode_m = 0xffffff00, -+ PCFG08_classCode_bridge_v = 06, -+ PCFG08_classCode_proc_v = 0x0b3000, // processor-MIPS -+ PCFG0C_cacheline_b = 0, -+ PCFG0C_cacheline_m = 0x000000ff, -+ PCFG0C_masterLatency_b = 8, -+ PCFG0C_masterLatency_m = 0x0000ff00, -+ PCFG0C_headerType_b = 16, -+ PCFG0C_headerType_m = 0x00ff0000, -+ PCFG0C_bist_b = 24, -+ PCFG0C_bist_m = 0xff000000, -+ -+ PCIPBA_msi_b = 0, -+ PCIPBA_msi_m = 0x00000001, -+ PCIPBA_p_b = 3, -+ PCIPBA_p_m = 0x00000004, -+ PCIPBA_baddr_b = 8, -+ PCIPBA_baddr_m = 0xffffff00, -+ -+ PCFGSS_vendorId_b = 0, -+ PCFGSS_vendorId_m = 0x0000ffff, -+ PCFGSS_id_b = 16, -+ PCFGSS_id_m = 0xffff0000, -+ -+ PCFG3C_interruptLine_b = 0, -+ PCFG3C_interruptLine_m = 0x000000ff, -+ PCFG3C_interruptPin_b = 8, -+ PCFG3C_interruptPin_m = 0x0000ff00, -+ PCFG3C_minGrant_b = 16, -+ PCFG3C_minGrant_m = 0x00ff0000, -+ PCFG3C_maxLat_b = 24, -+ PCFG3C_maxLat_m = 0xff000000, -+ -+ PCIPBAC_msi_b = 0, -+ PCIPBAC_msi_m = 0x00000001, -+ PCIPBAC_p_b = 1, -+ PCIPBAC_p_m = 0x00000002, -+ PCIPBAC_size_b = 2, -+ PCIPBAC_size_m = 0x0000007c, -+ PCIPBAC_sb_b = 7, -+ PCIPBAC_sb_m = 0x00000080, -+ PCIPBAC_pp_b = 8, -+ PCIPBAC_pp_m = 0x00000100, -+ PCIPBAC_mr_b = 9, -+ PCIPBAC_mr_m = 0x00000600, -+ PCIPBAC_mr_read_v =0, //no prefetching -+ PCIPBAC_mr_readLine_v =1, -+ PCIPBAC_mr_readMult_v =2, -+ PCIPBAC_mrl_b = 11, -+ PCIPBAC_mrl_m = 0x00000800, -+ PCIPBAC_mrm_b = 12, -+ PCIPBAC_mrm_m = 0x00001000, -+ PCIPBAC_trp_b = 13, -+ PCIPBAC_trp_m = 0x00002000, -+ -+ PCFG40_trdyTimeout_b = 0, -+ PCFG40_trdyTimeout_m = 0x000000ff, -+ PCFG40_retryLim_b = 8, -+ PCFG40_retryLim_m = 0x0000ff00, -+}; -+ -+/******************************************************************************* -+ * -+ * PCI Local Base Address [0|1|2|3] Register -+ * -+ ******************************************************************************/ -+enum { -+ PCILBA_baddr_b = 0, // In PCI_t -> pcilba [] .a -+ PCILBA_baddr_m = 0xffffff00, -+} ; -+/******************************************************************************* -+ * -+ * PCI Local Base Address Control Register -+ * -+ ******************************************************************************/ -+enum { -+ PCILBAC_msi_b = 0, // In pPci->pcilba[i].c -+ PCILBAC_msi_m = 0x00000001, -+ PCILBAC_msi_mem_v = 0, -+ PCILBAC_msi_io_v = 1, -+ PCILBAC_size_b = 2, // In pPci->pcilba[i].c -+ PCILBAC_size_m = 0x0000007c, -+ PCILBAC_sb_b = 7, // In pPci->pcilba[i].c -+ PCILBAC_sb_m = 0x00000080, -+ PCILBAC_rt_b = 8, // In pPci->pcilba[i].c -+ PCILBAC_rt_m = 0x00000100, -+ PCILBAC_rt_noprefetch_v = 0, // mem read -+ PCILBAC_rt_prefetch_v = 1, // mem readline -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI Local Base Address [0|1|2|3] Mapping Register -+ * -+ ******************************************************************************/ -+enum { -+ PCILBAM_maddr_b = 8, -+ PCILBAM_maddr_m = 0xffffff00, -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI Decoupled Access Control Register -+ * -+ ******************************************************************************/ -+enum { -+ PCIDAC_den_b = 0, -+ PCIDAC_den_m = 0x00000001, -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI Decoupled Access Status Register -+ * -+ ******************************************************************************/ -+enum { -+ PCIDAS_d_b = 0, -+ PCIDAS_d_m = 0x00000001, -+ PCIDAS_b_b = 1, -+ PCIDAS_b_m = 0x00000002, -+ PCIDAS_e_b = 2, -+ PCIDAS_e_m = 0x00000004, -+ PCIDAS_ofe_b = 3, -+ PCIDAS_ofe_m = 0x00000008, -+ PCIDAS_off_b = 4, -+ PCIDAS_off_m = 0x00000010, -+ PCIDAS_ife_b = 5, -+ PCIDAS_ife_m = 0x00000020, -+ PCIDAS_iff_b = 6, -+ PCIDAS_iff_m = 0x00000040, -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI DMA Channel 8 Configuration Register -+ * -+ ******************************************************************************/ -+enum -+{ -+ PCIDMA8C_mbs_b = 0, // Maximum Burst Size. -+ PCIDMA8C_mbs_m = 0x00000fff, // { pcidma8c } -+ PCIDMA8C_our_b = 12, // Optimize Unaligned Burst Reads. -+ PCIDMA8C_our_m = 0x00001000, // { pcidma8c } -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI DMA Channel 9 Configuration Register -+ * -+ ******************************************************************************/ -+enum -+{ -+ PCIDMA9C_mbs_b = 0, // Maximum Burst Size. -+ PCIDMA9C_mbs_m = 0x00000fff, // { pcidma9c } -+} ; -+ -+/******************************************************************************* -+ * -+ * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors -+ * -+ ******************************************************************************/ -+enum { -+ PCIDMAD_pt_b = 22, // in DEVCMD field (descriptor) -+ PCIDMAD_pt_m = 0x00c00000, // preferred transaction field -+ // These are for reads (DMA channel 8) -+ PCIDMAD_devcmd_mr_v = 0, //memory read -+ PCIDMAD_devcmd_mrl_v = 1, //memory read line -+ PCIDMAD_devcmd_mrm_v = 2, //memory read multiple -+ PCIDMAD_devcmd_ior_v = 3, //I/O read -+ // These are for writes (DMA channel 9) -+ PCIDMAD_devcmd_mw_v = 0, //memory write -+ PCIDMAD_devcmd_mwi_v = 1, //memory write invalidate -+ PCIDMAD_devcmd_iow_v = 3, //I/O write -+ -+ // Swap byte field applies to both DMA channel 8 and 9 -+ PCIDMAD_sb_b = 24, // in DEVCMD field (descriptor) -+ PCIDMAD_sb_m = 0x01000000, // swap byte field -+} ; -+ -+ -+/******************************************************************************* -+ * -+ * PCI Target Control Register -+ * -+ ******************************************************************************/ -+enum -+{ -+ PCITC_rtimer_b = 0, // In PCITC_t -> pcitc -+ PCITC_rtimer_m = 0x000000ff, -+ PCITC_dtimer_b = 8, // In PCITC_t -> pcitc -+ PCITC_dtimer_m = 0x0000ff00, -+ PCITC_rdr_b = 18, // In PCITC_t -> pcitc -+ PCITC_rdr_m = 0x00040000, -+ PCITC_ddt_b = 19, // In PCITC_t -> pcitc -+ PCITC_ddt_m = 0x00080000, -+} ; -+/******************************************************************************* -+ * -+ * PCI messaging unit [applies to both inbound and outbound registers ] -+ * -+ ******************************************************************************/ -+enum -+{ -+ PCIM_m0_b = 0, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} -+ PCIM_m0_m = 0x00000001, // inbound or outbound message 0 -+ PCIM_m1_b = 1, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} -+ PCIM_m1_m = 0x00000002, // inbound or outbound message 1 -+ PCIM_db_b = 2, // In PCIM_t -> {pci{iic,iim,ioic,ioim}} -+ PCIM_db_m = 0x00000004, // inbound or outbound doorbell -+}; -+ -+ -+ -+ -+ -+ -+#define PCI_MSG_VirtualAddress 0xB8088010 -+#define rc32434_pci ((volatile PCI_t) PCI0_VirtualAddress) -+#define rc32434_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress) -+ -+#define PCIM_SHFT 0x6 -+#define PCIM_BIT_LEN 0x7 -+#define PCIM_H_EA 0x3 -+#define PCIM_H_IA_FIX 0x4 -+#define PCIM_H_IA_RR 0x5 -+ -+#define PCI_ADDR_START 0x50000000 -+ -+#define CPUTOPCI_MEM_WIN 0x02000000 -+#define CPUTOPCI_IO_WIN 0x00100000 -+#define PCILBA_SIZE_SHFT 2 -+#define PCILBA_SIZE_MASK 0x1F -+#define SIZE_256MB 0x1C -+#define SIZE_128MB 0x1B -+#define SIZE_64MB 0x1A -+#define SIZE_32MB 0x19 -+#define SIZE_16MB 0x18 -+#define SIZE_4MB 0x16 -+#define SIZE_2MB 0x15 -+#define SIZE_1MB 0x14 -+#define KORINA_CONFIG0_ADDR 0x80000000 -+#define KORINA_CONFIG1_ADDR 0x80000004 -+#define KORINA_CONFIG2_ADDR 0x80000008 -+#define KORINA_CONFIG3_ADDR 0x8000000C -+#define KORINA_CONFIG4_ADDR 0x80000010 -+#define KORINA_CONFIG5_ADDR 0x80000014 -+#define KORINA_CONFIG6_ADDR 0x80000018 -+#define KORINA_CONFIG7_ADDR 0x8000001C -+#define KORINA_CONFIG8_ADDR 0x80000020 -+#define KORINA_CONFIG9_ADDR 0x80000024 -+#define KORINA_CONFIG10_ADDR 0x80000028 -+#define KORINA_CONFIG11_ADDR 0x8000002C -+#define KORINA_CONFIG12_ADDR 0x80000030 -+#define KORINA_CONFIG13_ADDR 0x80000034 -+#define KORINA_CONFIG14_ADDR 0x80000038 -+#define KORINA_CONFIG15_ADDR 0x8000003C -+#define KORINA_CONFIG16_ADDR 0x80000040 -+#define KORINA_CONFIG17_ADDR 0x80000044 -+#define KORINA_CONFIG18_ADDR 0x80000048 -+#define KORINA_CONFIG19_ADDR 0x8000004C -+#define KORINA_CONFIG20_ADDR 0x80000050 -+#define KORINA_CONFIG21_ADDR 0x80000054 -+#define KORINA_CONFIG22_ADDR 0x80000058 -+#define KORINA_CONFIG23_ADDR 0x8000005C -+#define KORINA_CONFIG24_ADDR 0x80000060 -+#define KORINA_CONFIG25_ADDR 0x80000064 -+#define KORINA_CMD (PCFG04_command_ioena_m | \ -+ PCFG04_command_memena_m | \ -+ PCFG04_command_bmena_m | \ -+ PCFG04_command_mwinv_m | \ -+ PCFG04_command_parena_m | \ -+ PCFG04_command_serrena_m ) -+ -+#define KORINA_STAT (PCFG04_status_mdpe_m | \ -+ PCFG04_status_sta_m | \ -+ PCFG04_status_rta_m | \ -+ PCFG04_status_rma_m | \ -+ PCFG04_status_sse_m | \ -+ PCFG04_status_pe_m) -+ -+#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD) -+ -+#define KORINA_REVID 0 -+#define KORINA_CLASS_CODE 0 -+#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \ -+ KORINA_REVID) -+ -+#define KORINA_CACHE_LINE_SIZE 4 -+#define KORINA_MASTER_LAT 0x3c -+#define KORINA_HEADER_TYPE 0 -+#define KORINA_BIST 0 -+ -+#define KORINA_CNFG3 ((KORINA_BIST << 24) | \ -+ (KORINA_HEADER_TYPE<<16) | \ -+ (KORINA_MASTER_LAT<<8) | \ -+ KORINA_CACHE_LINE_SIZE ) -+ -+#define KORINA_BAR0 0x00000008 /* 128 MB Memory */ -+#define KORINA_BAR1 0x18800001 /* 1 MB IO */ -+#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina -+ internal Registers */ -+#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */ -+ -+#define KORINA_CNFG4 KORINA_BAR0 -+#define KORINA_CNFG5 KORINA_BAR1 -+#define KORINA_CNFG6 KORINA_BAR2 -+#define KORINA_CNFG7 KORINA_BAR3 -+ -+#define KORINA_SUBSYS_VENDOR_ID 0x011d -+#define KORINA_SUBSYSTEM_ID 0x0214 -+#define KORINA_CNFG8 0 -+#define KORINA_CNFG9 0 -+#define KORINA_CNFG10 0 -+#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \ -+ KORINA_SUBSYSTEM_ID) -+#define KORINA_INT_LINE 1 -+#define KORINA_INT_PIN 1 -+#define KORINA_MIN_GNT 8 -+#define KORINA_MAX_LAT 0x38 -+#define KORINA_CNFG12 0 -+#define KORINA_CNFG13 0 -+#define KORINA_CNFG14 0 -+#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \ -+ (KORINA_MIN_GNT<<16) | \ -+ (KORINA_INT_PIN<<8) | \ -+ KORINA_INT_LINE) -+#define KORINA_RETRY_LIMIT 0x80 -+#define KORINA_TRDY_LIMIT 0x80 -+#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \ -+ KORINA_TRDY_LIMIT) -+#define PCI_PBAxC_R 0x0 -+#define PCI_PBAxC_RL 0x1 -+#define PCI_PBAxC_RM 0x2 -+#define SIZE_SHFT 2 -+ -+#if defined(__MIPSEB__) -+#define KORINA_PBA0C ( PCIPBAC_mrl_m | PCIPBAC_sb_m | \ -+ ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \ -+ PCIPBAC_pp_m | \ -+ (SIZE_128MB< -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+#ifndef __MIPS_RB_H__ -+#define __MIPS_RB_H__ -+#include -+ -+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000)) -+#define DEV0BASE 0x010000 -+#define DEV0MASK 0x010004 -+#define DEV0C 0x010008 -+#define DEV0TC 0x01000C -+#define DEV1BASE 0x010010 -+#define DEV1MASK 0x010014 -+#define DEV1C 0x010018 -+#define DEV1TC 0x01001C -+#define DEV2BASE 0x010020 -+#define DEV2MASK 0x010024 -+#define DEV2C 0x010028 -+#define DEV2TC 0x01002C -+#define DEV3BASE 0x010030 -+#define DEV3MASK 0x010034 -+#define DEV3C 0x010038 -+#define DEV3TC 0x01003C -+#define BTCS 0x010040 -+#define BTCOMPARE 0x010044 -+#define GPIOFUNC 0x050000 -+#define GPIOCFG 0x050004 -+#define GPIOD 0x050008 -+#define GPIOILEVEL 0x05000C -+#define GPIOISTAT 0x050010 -+#define GPIONMIEN 0x050014 -+#define IMASK6 0x038038 -+ -+#define LO_WPX (1 << 0) -+#define LO_ALE (1 << 1) -+#define LO_CLE (1 << 2) -+#define LO_CEX (1 << 3) -+#define LO_FOFF (1 << 5) -+#define LO_SPICS (1 << 6) -+#define LO_ULED (1 << 7) -+ -+typedef enum { -+ FUNC = 0x00, -+ CFG = 0x04, -+ DATA = 0x08, -+ ILEVEL = 0x0c, -+ ISTAT = 0x10, -+ NMIEN = 0x14 -+} gpio_func; -+ -+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask); -+extern unsigned get434Reg(unsigned regOffs); -+extern void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val); -+extern void gpio_set(gpio_func func, u32 mask, u32 value); -+extern u32 gpio_get(gpio_func func); -+ -+#define get434Reg(x) (*(volatile unsigned *) (IDT434_REG_BASE + (x))) -+ -+struct korina_device { -+ char *name; -+ unsigned char mac[6]; -+ struct net_device *dev; -+}; -+ -+struct cf_device { -+ int gpio_pin; -+ void *dev; -+ struct gendisk *gd; -+}; -+ -+#endif -diff -urN linux.old/include/asm-mips/rc32434/rc32434.h linux.dev/include/asm-mips/rc32434/rc32434.h ---- linux.old/include/asm-mips/rc32434/rc32434.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/include/asm-mips/rc32434/rc32434.h 2006-12-14 04:09:50.000000000 +0100 -@@ -0,0 +1,122 @@ -+/* -+ *************************************************************************** -+ * Definitions for IDT RC323434 CPU. -+ * -+ **************************************************************************** -+ * Kiran Rao -+ * -+ * Original form -+ **************************************************************************** -+ * P. Sadik Oct 08, 2003 -+ * -+ * Started revision history -+ * Made IDT_BUS_FREQ a kernel configuration parameter -+ **************************************************************************** -+ * P. Sadik Oct 10, 2003 -+ * -+ * Removed IDT_BUS_FREQ, since this parameter is no longer required. Instead -+ * idt_cpu_freq is used everywhere -+ **************************************************************************** -+ * P. Sadik Oct 20, 2003 -+ * -+ * Removed RC32434_BASE_BAUD -+ **************************************************************************** -+*/ -+#ifndef _RC32434_H_ -+#define _RC32434_H_ -+ -+#include -+#include -+#include -+ -+#define RC32434_REG_BASE 0x18000000 -+ -+#define interrupt ((volatile INT_t ) INT0_VirtualAddress) -+#define gpio ((volatile GPIO_t) GPIO0_VirtualAddress) -+ -+ -+#define IDT_CLOCK_MULT 2 -+#define MIPS_CPU_TIMER_IRQ 7 -+/* Interrupt Controller */ -+#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000) -+#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008) -+#define IC_GROUP_OFFSET 0x0C -+ -+#define NUM_INTR_GROUPS 5 -+/* 16550 UARTs */ -+ -+#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */ -+#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) /* GRP3 IRQ numbers start here */ -+#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) /* GRP4 IRQ numbers start here */ -+#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) /* GRP5 IRQ numbers start here */ -+#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32) -+ -+ -+#ifdef __MIPSEB__ -+#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003) -+#else -+#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000) -+#endif -+ -+#define RC32434_UART0_IRQ GROUP3_IRQ_BASE + 0 -+// #define EB434_UART1_IRQ GROUP4_IRQ_BASE + 11 -+ -+#define local_readl(addr) __raw_readl(addr) -+#define local_writel(l,addr) __raw_writel(l,addr) -+ -+/* cpu pipeline flush */ -+static inline void rc32434_sync(void) -+{ -+ __asm__ volatile ("sync"); -+} -+ -+static inline void rc32434_sync_udelay(int us) -+{ -+ __asm__ volatile ("sync"); -+ udelay(us); -+} -+ -+static inline void rc32434_sync_delay(int ms) -+{ -+ __asm__ volatile ("sync"); -+ mdelay(ms); -+} -+ -+/* -+ * C access to CLZ and CLO instructions -+ * (count leading zeroes/ones). -+ */ -+static inline int rc32434_clz(unsigned long val) -+{ -+ int ret; -+ __asm__ volatile ( -+ ".set\tnoreorder\n\t" -+ ".set\tnoat\n\t" -+ ".set\tmips32\n\t" -+ "clz\t%0,%1\n\t" -+ ".set\tmips0\n\t" -+ ".set\tat\n\t" -+ ".set\treorder" -+ : "=r" (ret) -+ : "r" (val)); -+ -+ return ret; -+} -+static inline int rc32434_clo(unsigned long val) -+{ -+ int ret; -+ __asm__ volatile ( -+ ".set\tnoreorder\n\t" -+ ".set\tnoat\n\t" -+ ".set\tmips32\n\t" -+ "clo\t%0,%1\n\t" -+ ".set\tmips0\n\t" -+ ".set\tat\n\t" -+ ".set\treorder" -+ : "=r" (ret) -+ : "r" (val)); -+ -+ return ret; -+} -+ -+#endif /* _RC32434_H_ */ diff --git a/target/linux/rb532-2.6/patches/110-korina_ethernet.patch b/target/linux/rb532-2.6/patches/110-korina_ethernet.patch index 5a6bf6f5dc..55b9779a87 100644 --- a/target/linux/rb532-2.6/patches/110-korina_ethernet.patch +++ b/target/linux/rb532-2.6/patches/110-korina_ethernet.patch @@ -15,1170 +15,6 @@ diff -urN linux.old/drivers/net/Kconfig linux.dev/drivers/net/Kconfig config MACE tristate "MACE (Power Mac ethernet) support" depends on NET_ETHERNET && PPC_PMAC && PPC32 -diff -urN linux.old/drivers/net/korina.c linux.dev/drivers/net/korina.c ---- linux.old/drivers/net/korina.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/net/korina.c 2006-12-14 03:18:45.000000000 +0100 -@@ -0,0 +1,1160 @@ -+/************************************************************************** -+ * -+ * BRIEF MODULE DESCRIPTION -+ * Driver for the IDT RC32434 on-chip ethernet controller. -+ * -+ * Copyright 2004 IDT Inc. (rischelp@idt.com) -+ * Copyright 2006 Felix Fietkau -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ ************************************************************************** -+ * May 2004 rkt, neb -+ * -+ * Based on the driver developed by B. Maruthanayakam, H. Kou and others. -+ * -+ * Aug 2004 Sadik -+ * -+ * Added NAPI -+ * -+ ************************************************************************** -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include "rc32434_eth.h" -+ -+#define DRIVER_VERSION "(mar2904)" -+ -+#define DRIVER_NAME "rc32434 Ethernet driver. " DRIVER_VERSION -+ -+#define STATION_ADDRESS_HIGH(dev) (((dev)->dev_addr[0] << 8) | \ -+ ((dev)->dev_addr[1])) -+#define STATION_ADDRESS_LOW(dev) (((dev)->dev_addr[2] << 24) | \ -+ ((dev)->dev_addr[3] << 16) | \ -+ ((dev)->dev_addr[4] << 8) | \ -+ ((dev)->dev_addr[5])) -+ -+#define MII_CLOCK 1250000 /* no more than 2.5MHz */ -+#define CONFIG_IDT_USE_NAPI 1 -+ -+ -+static inline void rc32434_abort_tx(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ rc32434_abort_dma(dev, lp->tx_dma_regs); -+ -+} -+ -+static inline void rc32434_abort_rx(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ rc32434_abort_dma(dev, lp->rx_dma_regs); -+ -+} -+ -+static inline void rc32434_start_tx(struct rc32434_local *lp, volatile DMAD_t td) -+{ -+ rc32434_start_dma(lp->tx_dma_regs, CPHYSADDR(td)); -+} -+ -+static inline void rc32434_start_rx(struct rc32434_local *lp, volatile DMAD_t rd) -+{ -+ rc32434_start_dma(lp->rx_dma_regs, CPHYSADDR(rd)); -+} -+ -+static inline void rc32434_chain_tx(struct rc32434_local *lp, volatile DMAD_t td) -+{ -+ rc32434_chain_dma(lp->tx_dma_regs, CPHYSADDR(td)); -+} -+ -+static inline void rc32434_chain_rx(struct rc32434_local *lp, volatile DMAD_t rd) -+{ -+ rc32434_chain_dma(lp->rx_dma_regs, CPHYSADDR(rd)); -+} -+ -+#ifdef RC32434_PROC_DEBUG -+static int rc32434_read_proc(char *buf, char **start, off_t fpos, -+ int length, int *eof, void *data) -+{ -+ struct net_device *dev = (struct net_device *)data; -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ int len = 0; -+ -+ /* print out header */ -+ len += sprintf(buf + len, "\n\tKorina Ethernet Debug\n\n"); -+ len += sprintf (buf + len, -+ "DMA halt count = %10d, DMA run count = %10d\n", -+ lp->dma_halt_cnt, lp->dma_run_cnt); -+ -+ if (fpos >= len) { -+ *start = buf; -+ *eof = 1; -+ return 0; -+ } -+ *start = buf + fpos; -+ -+ if ((len -= fpos) > length) -+ return length; -+ *eof = 1; -+ -+ return len; -+ -+} -+#endif -+ -+ -+/* -+ * Restart the RC32434 ethernet controller. -+ */ -+static int rc32434_restart(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ -+ /* -+ * Disable interrupts -+ */ -+ disable_irq(lp->rx_irq); -+ disable_irq(lp->tx_irq); -+#ifdef RC32434_REVISION -+ disable_irq(lp->ovr_irq); -+#endif -+ disable_irq(lp->und_irq); -+ -+ /* Mask F E bit in Tx DMA */ -+ __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) | DMASM_f_m | DMASM_e_m, &lp->tx_dma_regs->dmasm); -+ /* Mask D H E bit in Rx DMA */ -+ __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) | DMASM_d_m | DMASM_h_m | DMASM_e_m, &lp->rx_dma_regs->dmasm); -+ -+ rc32434_init(dev); -+ rc32434_multicast_list(dev); -+ -+ enable_irq(lp->und_irq); -+#ifdef RC32434_REVISION -+ enable_irq(lp->ovr_irq); -+#endif -+ enable_irq(lp->tx_irq); -+ enable_irq(lp->rx_irq); -+ -+ return 0; -+} -+ -+static int rc32434_probe(struct platform_device *pdev) -+{ -+ struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data; -+ struct rc32434_local *lp = NULL; -+ struct net_device *dev = NULL; -+ struct resource *r; -+ int i, retval,err; -+ -+ dev = alloc_etherdev(sizeof(struct rc32434_local)); -+ if(!dev) { -+ ERR("Korina_eth: alloc_etherdev failed\n"); -+ return -1; -+ } -+ -+ platform_set_drvdata(pdev, dev); -+ SET_MODULE_OWNER(dev); -+ bif->dev = dev; -+ -+ memcpy(dev->dev_addr, bif->mac, 6); -+ -+ /* Initialize the device structure. */ -+ if (dev->priv == NULL) { -+ lp = (struct rc32434_local *)kmalloc(sizeof(*lp), GFP_KERNEL); -+ memset(lp, 0, sizeof(struct rc32434_local)); -+ } -+ else { -+ lp = (struct rc32434_local *)dev->priv; -+ } -+ -+ lp->rx_irq = platform_get_irq_byname(pdev, "korina_rx"); -+ lp->tx_irq = platform_get_irq_byname(pdev, "korina_tx"); -+ lp->ovr_irq = platform_get_irq_byname(pdev, "korina_ovr"); -+ lp->und_irq = platform_get_irq_byname(pdev, "korina_und"); -+ -+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs"); -+ dev->base_addr = r->start; -+ lp->eth_regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!lp->eth_regs) { -+ ERR("Can't remap eth registers\n"); -+ retval = -ENXIO; -+ goto probe_err_out; -+ } -+ -+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx"); -+ lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!lp->rx_dma_regs) { -+ ERR("Can't remap Rx DMA registers\n"); -+ retval = -ENXIO; -+ goto probe_err_out; -+ } -+ -+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx"); -+ lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start); -+ if (!lp->tx_dma_regs) { -+ ERR("Can't remap Tx DMA registers\n"); -+ retval = -ENXIO; -+ goto probe_err_out; -+ } -+ -+#ifdef RC32434_PROC_DEBUG -+ lp->ps = create_proc_read_entry (bif->name, 0, proc_net, -+ rc32434_read_proc, dev); -+#endif -+ -+ lp->td_ring = (DMAD_t)kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL); -+ if (!lp->td_ring) { -+ ERR("Can't allocate descriptors\n"); -+ retval = -ENOMEM; -+ goto probe_err_out; -+ } -+ -+ dma_cache_inv((unsigned long)(lp->td_ring), TD_RING_SIZE + RD_RING_SIZE); -+ -+ /* now convert TD_RING pointer to KSEG1 */ -+ lp->td_ring = (DMAD_t )KSEG1ADDR(lp->td_ring); -+ lp->rd_ring = &lp->td_ring[RC32434_NUM_TDS]; -+ -+ -+ spin_lock_init(&lp->lock); -+ -+ /* just use the rx dma irq */ -+ dev->irq = lp->rx_irq; -+ -+ dev->priv = lp; -+ -+ dev->open = rc32434_open; -+ dev->stop = rc32434_close; -+ dev->hard_start_xmit = rc32434_send_packet; -+ dev->get_stats = rc32434_get_stats; -+ dev->set_multicast_list = &rc32434_multicast_list; -+ dev->tx_timeout = rc32434_tx_timeout; -+ dev->watchdog_timeo = RC32434_TX_TIMEOUT; -+ -+#ifdef CONFIG_IDT_USE_NAPI -+ dev->poll = rc32434_poll; -+ dev->weight = 64; -+ printk("Using NAPI with weight %d\n",dev->weight); -+#else -+ lp->rx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL); -+ tasklet_init(lp->rx_tasklet, rc32434_rx_tasklet, (unsigned long)dev); -+#endif -+ lp->tx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL); -+ tasklet_init(lp->tx_tasklet, rc32434_tx_tasklet, (unsigned long)dev); -+ -+ if ((err = register_netdev(dev))) { -+ printk(KERN_ERR "rc32434 ethernet. Cannot register net device %d\n", err); -+ free_netdev(dev); -+ retval = -EINVAL; -+ goto probe_err_out; -+ } -+ -+ INFO("Rx IRQ %d, Tx IRQ %d, ", lp->rx_irq, lp->tx_irq); -+ for (i = 0; i < 6; i++) { -+ printk("%2.2x", dev->dev_addr[i]); -+ if (i<5) -+ printk(":"); -+ } -+ printk("\n"); -+ -+ return 0; -+ -+ probe_err_out: -+ rc32434_cleanup_module(); -+ ERR(" failed. Returns %d\n", retval); -+ return retval; -+ -+} -+ -+static int rc32434_remove(struct platform_device *pdev) -+{ -+ struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data; -+ -+ if (bif->dev != NULL) { -+ struct rc32434_local *lp = (struct rc32434_local *)bif->dev->priv; -+ if (lp != NULL) { -+ if (lp->eth_regs) -+ iounmap((void*)lp->eth_regs); -+ if (lp->rx_dma_regs) -+ iounmap((void*)lp->rx_dma_regs); -+ if (lp->tx_dma_regs) -+ iounmap((void*)lp->tx_dma_regs); -+ if (lp->td_ring) -+ kfree((void*)KSEG0ADDR(lp->td_ring)); -+ -+#ifdef RC32434_PROC_DEBUG -+ if (lp->ps) { -+ remove_proc_entry(bif->name, proc_net); -+ } -+#endif -+ kfree(lp); -+ } -+ -+ platform_set_drvdata(pdev, NULL); -+ unregister_netdev(bif->dev); -+ free_netdev(bif->dev); -+ kfree(bif->dev); -+ } -+ return 0; -+} -+ -+ -+static int rc32434_open(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ -+ /* Initialize */ -+ if (rc32434_init(dev)) { -+ ERR("Error: cannot open the Ethernet device\n"); -+ return -EAGAIN; -+ } -+ -+ /* Install the interrupt handler that handles the Done Finished Ovr and Und Events */ -+ if (request_irq(lp->rx_irq, &rc32434_rx_dma_interrupt, -+ SA_SHIRQ | SA_INTERRUPT, -+ "Korina ethernet Rx", dev)) { -+ ERR(": unable to get Rx DMA IRQ %d\n", -+ lp->rx_irq); -+ return -EAGAIN; -+ } -+ if (request_irq(lp->tx_irq, &rc32434_tx_dma_interrupt, -+ SA_SHIRQ | SA_INTERRUPT, -+ "Korina ethernet Tx", dev)) { -+ ERR(": unable to get Tx DMA IRQ %d\n", -+ lp->tx_irq); -+ free_irq(lp->rx_irq, dev); -+ return -EAGAIN; -+ } -+ -+#ifdef RC32434_REVISION -+ /* Install handler for overrun error. */ -+ if (request_irq(lp->ovr_irq, &rc32434_ovr_interrupt, -+ SA_SHIRQ | SA_INTERRUPT, -+ "Ethernet Overflow", dev)) { -+ ERR(": unable to get OVR IRQ %d\n", -+ lp->ovr_irq); -+ free_irq(lp->rx_irq, dev); -+ free_irq(lp->tx_irq, dev); -+ return -EAGAIN; -+ } -+#endif -+ -+ /* Install handler for underflow error. */ -+ if (request_irq(lp->und_irq, &rc32434_und_interrupt, -+ SA_SHIRQ | SA_INTERRUPT, -+ "Ethernet Underflow", dev)) { -+ ERR(": unable to get UND IRQ %d\n", -+ lp->und_irq); -+ free_irq(lp->rx_irq, dev); -+ free_irq(lp->tx_irq, dev); -+#ifdef RC32434_REVISION -+ free_irq(lp->ovr_irq, dev); -+#endif -+ return -EAGAIN; -+ } -+ -+ -+ return 0; -+} -+ -+ -+ -+ -+static int rc32434_close(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ u32 tmp; -+ -+ /* Disable interrupts */ -+ disable_irq(lp->rx_irq); -+ disable_irq(lp->tx_irq); -+#ifdef RC32434_REVISION -+ disable_irq(lp->ovr_irq); -+#endif -+ disable_irq(lp->und_irq); -+ -+ tmp = __raw_readl(&lp->tx_dma_regs->dmasm); -+ tmp = tmp | DMASM_f_m | DMASM_e_m; -+ __raw_writel(tmp, &lp->tx_dma_regs->dmasm); -+ -+ tmp = __raw_readl(&lp->rx_dma_regs->dmasm); -+ tmp = tmp | DMASM_d_m | DMASM_h_m | DMASM_e_m; -+ __raw_writel(tmp, &lp->rx_dma_regs->dmasm); -+ -+ free_irq(lp->rx_irq, dev); -+ free_irq(lp->tx_irq, dev); -+#ifdef RC32434_REVISION -+ free_irq(lp->ovr_irq, dev); -+#endif -+ free_irq(lp->und_irq, dev); -+ return 0; -+} -+ -+ -+/* transmit packet */ -+static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ unsigned long flags; -+ u32 length; -+ DMAD_t td; -+ -+ -+ spin_lock_irqsave(&lp->lock, flags); -+ -+ td = &lp->td_ring[lp->tx_chain_tail]; -+ -+ /* stop queue when full, drop pkts if queue already full */ -+ if(lp->tx_count >= (RC32434_NUM_TDS - 2)) { -+ lp->tx_full = 1; -+ -+ if(lp->tx_count == (RC32434_NUM_TDS - 2)) { -+ netif_stop_queue(dev); -+ } -+ else { -+ lp->stats.tx_dropped++; -+ dev_kfree_skb_any(skb); -+ spin_unlock_irqrestore(&lp->lock, flags); -+ return 1; -+ } -+ } -+ -+ lp->tx_count ++; -+ -+ lp->tx_skb[lp->tx_chain_tail] = skb; -+ -+ length = skb->len; -+ -+ /* Setup the transmit descriptor. */ -+ td->ca = CPHYSADDR(skb->data); -+ -+ if(__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0) { -+ if( lp->tx_chain_status == empty ) { -+ td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ -+ lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ -+ __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */ -+ lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */ -+ } -+ else { -+ td->control = DMA_COUNT(length) |DMAD_cof_m|DMAD_iof_m; /* Update tail */ -+ lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */ -+ lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */ -+ lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ -+ __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */ -+ lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */ -+ lp->tx_chain_status = empty; -+ } -+ } -+ else { -+ if( lp->tx_chain_status == empty ) { -+ td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ -+ lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ -+ lp->tx_chain_status = filled; -+ } -+ else { -+ td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */ -+ lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */ -+ lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */ -+ lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */ -+ } -+ } -+ -+ dev->trans_start = jiffies; -+ -+ spin_unlock_irqrestore(&lp->lock, flags); -+ -+ return 0; -+} -+ -+ -+/* Ethernet MII-PHY Handler */ -+static void rc32434_mii_handler(unsigned long data) -+{ -+ struct net_device *dev = (struct net_device *)data; -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ unsigned long flags; -+ unsigned long duplex_status; -+ int port_addr = (lp->rx_irq == 0x2c? 1:0) << 8; -+ -+ spin_lock_irqsave(&lp->lock, flags); -+ -+ /* Two ports are using the same MII, the difference is the PHY address */ -+ __raw_writel(0, &rc32434_eth0_regs->miimcfg); -+ __raw_writel(0, &rc32434_eth0_regs->miimcmd); -+ __raw_writel(port_addr |0x05, &rc32434_eth0_regs->miimaddr); -+ __raw_writel(MIIMCMD_scn_m, &rc32434_eth0_regs->miimcmd); -+ while(__raw_readl(&rc32434_eth0_regs->miimind) & MIIMIND_nv_m); -+ -+ ERR("irq:%x port_addr:%x RDD:%x\n", -+ lp->rx_irq, port_addr, __raw_readl(&rc32434_eth0_regs->miimrdd)); -+ duplex_status = (__raw_readl(&rc32434_eth0_regs->miimrdd) & 0x140)? ETHMAC2_fd_m: 0; -+ if(duplex_status != lp->duplex_mode) { -+ ERR("The MII-PHY is Auto-negotiated to %s-Duplex mode for Eth-%x\n", duplex_status? "Full":"Half", lp->rx_irq == 0x2c? 1:0); -+ lp->duplex_mode = duplex_status; -+ rc32434_restart(dev); -+ } -+ -+ lp->mii_phy_timer.expires = jiffies + 10 * HZ; -+ add_timer(&lp->mii_phy_timer); -+ -+ spin_unlock_irqrestore(&lp->lock, flags); -+ -+} -+ -+#ifdef RC32434_REVISION -+/* Ethernet Rx Overflow interrupt */ -+static irqreturn_t -+rc32434_ovr_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct rc32434_local *lp; -+ unsigned int ovr; -+ irqreturn_t retval = IRQ_NONE; -+ -+ ASSERT(dev != NULL); -+ -+ lp = (struct rc32434_local *)dev->priv; -+ spin_lock(&lp->lock); -+ ovr = __raw_readl(&lp->eth_regs->ethintfc); -+ -+ if(ovr & ETHINTFC_ovr_m) { -+ netif_stop_queue(dev); -+ -+ /* clear OVR bit */ -+ __raw_writel((ovr & ~ETHINTFC_ovr_m), &lp->eth_regs->ethintfc); -+ -+ /* Restart interface */ -+ rc32434_restart(dev); -+ retval = IRQ_HANDLED; -+ } -+ spin_unlock(&lp->lock); -+ -+ return retval; -+} -+ -+#endif -+ -+ -+/* Ethernet Tx Underflow interrupt */ -+static irqreturn_t -+rc32434_und_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct rc32434_local *lp; -+ unsigned int und; -+ irqreturn_t retval = IRQ_NONE; -+ -+ ASSERT(dev != NULL); -+ -+ lp = (struct rc32434_local *)dev->priv; -+ -+ spin_lock(&lp->lock); -+ -+ und = __raw_readl(&lp->eth_regs->ethintfc); -+ -+ if(und & ETHINTFC_und_m) { -+ netif_stop_queue(dev); -+ -+ __raw_writel((und & ~ETHINTFC_und_m), &lp->eth_regs->ethintfc); -+ -+ /* Restart interface */ -+ rc32434_restart(dev); -+ retval = IRQ_HANDLED; -+ } -+ -+ spin_unlock(&lp->lock); -+ -+ return retval; -+} -+ -+ -+/* Ethernet Rx DMA interrupt */ -+static irqreturn_t -+rc32434_rx_dma_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct rc32434_local* lp; -+ volatile u32 dmas,dmasm; -+ irqreturn_t retval; -+ -+ ASSERT(dev != NULL); -+ -+ lp = (struct rc32434_local *)dev->priv; -+ -+ spin_lock(&lp->lock); -+ dmas = __raw_readl(&lp->rx_dma_regs->dmas); -+ if(dmas & (DMAS_d_m|DMAS_h_m|DMAS_e_m)) { -+ /* Mask D H E bit in Rx DMA */ -+ dmasm = __raw_readl(&lp->rx_dma_regs->dmasm); -+ __raw_writel(dmasm | (DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); -+#ifdef CONFIG_IDT_USE_NAPI -+ if(netif_rx_schedule_prep(dev)) -+ __netif_rx_schedule(dev); -+#else -+ tasklet_hi_schedule(lp->rx_tasklet); -+#endif -+ -+ if (dmas & DMAS_e_m) -+ ERR(": DMA error\n"); -+ -+ retval = IRQ_HANDLED; -+ } -+ else -+ retval = IRQ_NONE; -+ -+ spin_unlock(&lp->lock); -+ return retval; -+} -+ -+#ifdef CONFIG_IDT_USE_NAPI -+static int rc32434_poll(struct net_device *rx_data_dev, int *budget) -+#else -+static void rc32434_rx_tasklet(unsigned long rx_data_dev) -+#endif -+{ -+ struct net_device *dev = (struct net_device *)rx_data_dev; -+ struct rc32434_local* lp = netdev_priv(dev); -+ volatile DMAD_t rd = &lp->rd_ring[lp->rx_next_done]; -+ struct sk_buff *skb, *skb_new; -+ u8* pkt_buf; -+ u32 devcs, count, pkt_len, pktuncrc_len; -+ volatile u32 dmas; -+#ifdef CONFIG_IDT_USE_NAPI -+ u32 received = 0; -+ int rx_work_limit = min(*budget,dev->quota); -+#else -+ unsigned long flags; -+ spin_lock_irqsave(&lp->lock, flags); -+#endif -+ -+ while ( (count = RC32434_RBSIZE - (u32)DMA_COUNT(rd->control)) != 0) { -+#ifdef CONFIG_IDT_USE_NAPI -+ if(--rx_work_limit <0) -+ { -+ break; -+ } -+#endif -+ /* init the var. used for the later operations within the while loop */ -+ skb_new = NULL; -+ devcs = rd->devcs; -+ pkt_len = RCVPKT_LENGTH(devcs); -+ skb = lp->rx_skb[lp->rx_next_done]; -+ -+ if (count < 64) { -+ lp->stats.rx_errors++; -+ lp->stats.rx_dropped++; -+ } -+ else if ((devcs & ( ETHRX_ld_m)) != ETHRX_ld_m) { -+ /* check that this is a whole packet */ -+ /* WARNING: DMA_FD bit incorrectly set in Rc32434 (errata ref #077) */ -+ lp->stats.rx_errors++; -+ lp->stats.rx_dropped++; -+ } -+ else if ( (devcs & ETHRX_rok_m) ) { -+ -+ { -+ /* must be the (first and) last descriptor then */ -+ pkt_buf = (u8*)lp->rx_skb[lp->rx_next_done]->data; -+ -+ pktuncrc_len = pkt_len - 4; -+ /* invalidate the cache */ -+ dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len); -+ -+ /* Malloc up new buffer. */ -+ skb_new = dev_alloc_skb(RC32434_RBSIZE + 2); -+ -+ if (skb_new != NULL){ -+ /* Make room */ -+ skb_put(skb, pktuncrc_len); -+ -+ skb->protocol = eth_type_trans(skb, dev); -+ -+ /* pass the packet to upper layers */ -+#ifdef CONFIG_IDT_USE_NAPI -+ netif_receive_skb(skb); -+#else -+ netif_rx(skb); -+#endif -+ -+ dev->last_rx = jiffies; -+ lp->stats.rx_packets++; -+ lp->stats.rx_bytes += pktuncrc_len; -+ -+ if (IS_RCV_MP(devcs)) -+ lp->stats.multicast++; -+ -+ /* 16 bit align */ -+ skb_reserve(skb_new, 2); -+ -+ skb_new->dev = dev; -+ lp->rx_skb[lp->rx_next_done] = skb_new; -+ } -+ else { -+ ERR("no memory, dropping rx packet.\n"); -+ lp->stats.rx_errors++; -+ lp->stats.rx_dropped++; -+ } -+ } -+ -+ } -+ else { -+ /* This should only happen if we enable accepting broken packets */ -+ lp->stats.rx_errors++; -+ lp->stats.rx_dropped++; -+ -+ /* add statistics counters */ -+ if (IS_RCV_CRC_ERR(devcs)) { -+ DBG(2, "RX CRC error\n"); -+ lp->stats.rx_crc_errors++; -+ } -+ else if (IS_RCV_LOR_ERR(devcs)) { -+ DBG(2, "RX LOR error\n"); -+ lp->stats.rx_length_errors++; -+ } -+ else if (IS_RCV_LE_ERR(devcs)) { -+ DBG(2, "RX LE error\n"); -+ lp->stats.rx_length_errors++; -+ } -+ else if (IS_RCV_OVR_ERR(devcs)) { -+ lp->stats.rx_over_errors++; -+ } -+ else if (IS_RCV_CV_ERR(devcs)) { -+ /* code violation */ -+ DBG(2, "RX CV error\n"); -+ lp->stats.rx_frame_errors++; -+ } -+ else if (IS_RCV_CES_ERR(devcs)) { -+ DBG(2, "RX Preamble error\n"); -+ } -+ } -+ -+ rd->devcs = 0; -+ -+ /* restore descriptor's curr_addr */ -+ if(skb_new) -+ rd->ca = CPHYSADDR(skb_new->data); -+ else -+ rd->ca = CPHYSADDR(skb->data); -+ -+ rd->control = DMA_COUNT(RC32434_RBSIZE) |DMAD_cod_m |DMAD_iod_m; -+ lp->rd_ring[(lp->rx_next_done-1)& RC32434_RDS_MASK].control &= ~(DMAD_cod_m); -+ -+ lp->rx_next_done = (lp->rx_next_done + 1) & RC32434_RDS_MASK; -+ rd = &lp->rd_ring[lp->rx_next_done]; -+ __raw_writel( ~DMAS_d_m, &lp->rx_dma_regs->dmas); -+ } -+#ifdef CONFIG_IDT_USE_NAPI -+ dev->quota -= received; -+ *budget =- received; -+ if(rx_work_limit < 0) -+ goto not_done; -+#endif -+ -+ dmas = __raw_readl(&lp->rx_dma_regs->dmas); -+ -+ if(dmas & DMAS_h_m) { -+ __raw_writel( ~(DMAS_h_m | DMAS_e_m), &lp->rx_dma_regs->dmas); -+#ifdef RC32434_PROC_DEBUG -+ lp->dma_halt_cnt++; -+#endif -+ rd->devcs = 0; -+ skb = lp->rx_skb[lp->rx_next_done]; -+ rd->ca = CPHYSADDR(skb->data); -+ rc32434_chain_rx(lp,rd); -+ } -+ -+#ifdef CONFIG_IDT_USE_NAPI -+ netif_rx_complete(dev); -+#endif -+ /* Enable D H E bit in Rx DMA */ -+ __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m |DMASM_e_m), &lp->rx_dma_regs->dmasm); -+#ifdef CONFIG_IDT_USE_NAPI -+ return 0; -+ not_done: -+ return 1; -+#else -+ spin_unlock_irqrestore(&lp->lock, flags); -+ return; -+#endif -+ -+ -+} -+ -+ -+ -+/* Ethernet Tx DMA interrupt */ -+static irqreturn_t -+rc32434_tx_dma_interrupt(int irq, void *dev_id) -+{ -+ struct net_device *dev = (struct net_device *)dev_id; -+ struct rc32434_local *lp; -+ volatile u32 dmas,dmasm; -+ irqreturn_t retval; -+ -+ ASSERT(dev != NULL); -+ -+ lp = (struct rc32434_local *)dev->priv; -+ -+ spin_lock(&lp->lock); -+ -+ dmas = __raw_readl(&lp->tx_dma_regs->dmas); -+ -+ if (dmas & (DMAS_f_m | DMAS_e_m)) { -+ dmasm = __raw_readl(&lp->tx_dma_regs->dmasm); -+ /* Mask F E bit in Tx DMA */ -+ __raw_writel(dmasm | (DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); -+ -+ tasklet_hi_schedule(lp->tx_tasklet); -+ -+ if(lp->tx_chain_status == filled && (__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0)) { -+ __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); -+ lp->tx_chain_status = empty; -+ lp->tx_chain_head = lp->tx_chain_tail; -+ dev->trans_start = jiffies; -+ } -+ -+ if (dmas & DMAS_e_m) -+ ERR(": DMA error\n"); -+ -+ retval = IRQ_HANDLED; -+ } -+ else -+ retval = IRQ_NONE; -+ -+ spin_unlock(&lp->lock); -+ -+ return retval; -+} -+ -+ -+static void rc32434_tx_tasklet(unsigned long tx_data_dev) -+{ -+ struct net_device *dev = (struct net_device *)tx_data_dev; -+ struct rc32434_local* lp = (struct rc32434_local *)dev->priv; -+ volatile DMAD_t td = &lp->td_ring[lp->tx_next_done]; -+ u32 devcs; -+ unsigned long flags; -+ volatile u32 dmas; -+ -+ spin_lock_irqsave(&lp->lock, flags); -+ -+ /* process all desc that are done */ -+ while(IS_DMA_FINISHED(td->control)) { -+ if(lp->tx_full == 1) { -+ netif_wake_queue(dev); -+ lp->tx_full = 0; -+ } -+ -+ devcs = lp->td_ring[lp->tx_next_done].devcs; -+ if ((devcs & (ETHTX_fd_m | ETHTX_ld_m)) != (ETHTX_fd_m | ETHTX_ld_m)) { -+ lp->stats.tx_errors++; -+ lp->stats.tx_dropped++; -+ -+ /* should never happen */ -+ DBG(1, __FUNCTION__ ": split tx ignored\n"); -+ } -+ else if (IS_TX_TOK(devcs)) { -+ lp->stats.tx_packets++; -+ } -+ else { -+ lp->stats.tx_errors++; -+ lp->stats.tx_dropped++; -+ -+ /* underflow */ -+ if (IS_TX_UND_ERR(devcs)) -+ lp->stats.tx_fifo_errors++; -+ -+ /* oversized frame */ -+ if (IS_TX_OF_ERR(devcs)) -+ lp->stats.tx_aborted_errors++; -+ -+ /* excessive deferrals */ -+ if (IS_TX_ED_ERR(devcs)) -+ lp->stats.tx_carrier_errors++; -+ -+ /* collisions: medium busy */ -+ if (IS_TX_EC_ERR(devcs)) -+ lp->stats.collisions++; -+ -+ /* late collision */ -+ if (IS_TX_LC_ERR(devcs)) -+ lp->stats.tx_window_errors++; -+ -+ } -+ -+ /* We must always free the original skb */ -+ if (lp->tx_skb[lp->tx_next_done] != NULL) { -+ dev_kfree_skb_any(lp->tx_skb[lp->tx_next_done]); -+ lp->tx_skb[lp->tx_next_done] = NULL; -+ } -+ -+ lp->td_ring[lp->tx_next_done].control = DMAD_iof_m; -+ lp->td_ring[lp->tx_next_done].devcs = ETHTX_fd_m | ETHTX_ld_m; -+ lp->td_ring[lp->tx_next_done].link = 0; -+ lp->td_ring[lp->tx_next_done].ca = 0; -+ lp->tx_count --; -+ -+ /* go on to next transmission */ -+ lp->tx_next_done = (lp->tx_next_done + 1) & RC32434_TDS_MASK; -+ td = &lp->td_ring[lp->tx_next_done]; -+ -+ } -+ -+ dmas = __raw_readl(&lp->tx_dma_regs->dmas); -+ __raw_writel( ~dmas, &lp->tx_dma_regs->dmas); -+ -+ /* Enable F E bit in Tx DMA */ -+ __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); -+ spin_unlock_irqrestore(&lp->lock, flags); -+ -+} -+ -+ -+static struct net_device_stats * rc32434_get_stats(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ return &lp->stats; -+} -+ -+ -+/* -+ * Set or clear the multicast filter for this adaptor. -+ */ -+static void rc32434_multicast_list(struct net_device *dev) -+{ -+ /* listen to broadcasts always and to treat */ -+ /* IFF bits independantly */ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ unsigned long flags; -+ u32 recognise = ETHARC_ab_m; /* always accept broadcasts */ -+ -+ if (dev->flags & IFF_PROMISC) /* set promiscuous mode */ -+ recognise |= ETHARC_pro_m; -+ -+ if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) -+ recognise |= ETHARC_am_m; /* all multicast & bcast */ -+ else if (dev->mc_count > 0) { -+ DBG(2, __FUNCTION__ ": mc_count %d\n", dev->mc_count); -+ recognise |= ETHARC_am_m; /* for the time being */ -+ } -+ -+ spin_lock_irqsave(&lp->lock, flags); -+ __raw_writel(recognise, &lp->eth_regs->etharc); -+ spin_unlock_irqrestore(&lp->lock, flags); -+} -+ -+ -+static void rc32434_tx_timeout(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&lp->lock, flags); -+ rc32434_restart(dev); -+ spin_unlock_irqrestore(&lp->lock, flags); -+ -+} -+ -+ -+/* -+ * Initialize the RC32434 ethernet controller. -+ */ -+static int rc32434_init(struct net_device *dev) -+{ -+ struct rc32434_local *lp = (struct rc32434_local *)dev->priv; -+ int i, j; -+ -+ /* Disable DMA */ -+ rc32434_abort_tx(dev); -+ rc32434_abort_rx(dev); -+ -+ /* reset ethernet logic */ -+ __raw_writel(0, &lp->eth_regs->ethintfc); -+ while((__raw_readl(&lp->eth_regs->ethintfc) & ETHINTFC_rip_m)) -+ dev->trans_start = jiffies; -+ -+ /* Enable Ethernet Interface */ -+ __raw_writel(ETHINTFC_en_m, &lp->eth_regs->ethintfc); -+ -+#ifndef CONFIG_IDT_USE_NAPI -+ tasklet_disable(lp->rx_tasklet); -+#endif -+ tasklet_disable(lp->tx_tasklet); -+ -+ /* Initialize the transmit Descriptors */ -+ for (i = 0; i < RC32434_NUM_TDS; i++) { -+ lp->td_ring[i].control = DMAD_iof_m; -+ lp->td_ring[i].devcs = ETHTX_fd_m | ETHTX_ld_m; -+ lp->td_ring[i].ca = 0; -+ lp->td_ring[i].link = 0; -+ if (lp->tx_skb[i] != NULL) { -+ dev_kfree_skb_any(lp->tx_skb[i]); -+ lp->tx_skb[i] = NULL; -+ } -+ } -+ lp->tx_next_done = lp->tx_chain_head = lp->tx_chain_tail = lp->tx_full = lp->tx_count = 0; -+ lp-> tx_chain_status = empty; -+ -+ /* -+ * Initialize the receive descriptors so that they -+ * become a circular linked list, ie. let the last -+ * descriptor point to the first again. -+ */ -+ for (i=0; irx_skb[i]; -+ -+ if (lp->rx_skb[i] == NULL) { -+ skb = dev_alloc_skb(RC32434_RBSIZE + 2); -+ if (skb == NULL) { -+ ERR("No memory in the system\n"); -+ for (j = 0; j < RC32434_NUM_RDS; j ++) -+ if (lp->rx_skb[j] != NULL) -+ dev_kfree_skb_any(lp->rx_skb[j]); -+ -+ return 1; -+ } -+ else { -+ skb->dev = dev; -+ skb_reserve(skb, 2); -+ lp->rx_skb[i] = skb; -+ lp->rd_ring[i].ca = CPHYSADDR(skb->data); -+ -+ } -+ } -+ lp->rd_ring[i].control = DMAD_iod_m | DMA_COUNT(RC32434_RBSIZE); -+ lp->rd_ring[i].devcs = 0; -+ lp->rd_ring[i].ca = CPHYSADDR(skb->data); -+ lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); -+ -+ } -+ /* loop back */ -+ lp->rd_ring[RC32434_NUM_RDS-1].link = CPHYSADDR(&lp->rd_ring[0]); -+ lp->rx_next_done = 0; -+ -+ lp->rd_ring[RC32434_NUM_RDS-1].control |= DMAD_cod_m; -+ lp->rx_chain_head = 0; -+ lp->rx_chain_tail = 0; -+ lp->rx_chain_status = empty; -+ -+ __raw_writel(0, &lp->rx_dma_regs->dmas); -+ /* Start Rx DMA */ -+ rc32434_start_rx(lp, &lp->rd_ring[0]); -+ -+ /* Enable F E bit in Tx DMA */ -+ __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm); -+ /* Enable D H E bit in Rx DMA */ -+ __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm); -+ -+ /* Accept only packets destined for this Ethernet device address */ -+ __raw_writel(ETHARC_ab_m, &lp->eth_regs->etharc); -+ -+ /* Set all Ether station address registers to their initial values */ -+ __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal0); -+ __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah0); -+ -+ __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal1); -+ __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah1); -+ -+ __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal2); -+ __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah2); -+ -+ __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal3); -+ __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah3); -+ -+ -+ /* Frame Length Checking, Pad Enable, CRC Enable, Full Duplex set */ -+ __raw_writel(ETHMAC2_pe_m | ETHMAC2_cen_m | ETHMAC2_fd_m, &lp->eth_regs->ethmac2); -+ //ETHMAC2_flc_m ETHMAC2_fd_m lp->duplex_mode -+ -+ /* Back to back inter-packet-gap */ -+ __raw_writel(0x15, &lp->eth_regs->ethipgt); -+ /* Non - Back to back inter-packet-gap */ -+ __raw_writel(0x12, &lp->eth_regs->ethipgr); -+ -+ /* Management Clock Prescaler Divisor */ -+ /* Clock independent setting */ -+ __raw_writel(((idt_cpu_freq)/MII_CLOCK+1) & ~1, -+ &lp->eth_regs->ethmcp); -+ -+ /* don't transmit until fifo contains 48b */ -+ __raw_writel(48, &lp->eth_regs->ethfifott); -+ -+ __raw_writel(ETHMAC1_re_m, &lp->eth_regs->ethmac1); -+ -+#ifndef CONFIG_IDT_USE_NAPI -+ tasklet_enable(lp->rx_tasklet); -+#endif -+ tasklet_enable(lp->tx_tasklet); -+ -+ netif_start_queue(dev); -+ -+ return 0; -+} -+ -+static struct platform_driver korina_driver = { -+ .driver.name = "korina", -+ .probe = rc32434_probe, -+ .remove = rc32434_remove, -+}; -+ -+static int __init rc32434_init_module(void) -+{ -+ return platform_driver_register(&korina_driver); -+} -+ -+static void rc32434_cleanup_module(void) -+{ -+ return platform_driver_unregister(&korina_driver); -+} -+ -+module_init(rc32434_init_module); -+module_exit(rc32434_cleanup_module); diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile --- linux.old/drivers/net/Makefile 2006-12-14 03:13:47.000000000 +0100 +++ linux.dev/drivers/net/Makefile 2006-12-14 03:18:45.000000000 +0100 @@ -1191,185 +27,4 @@ diff -urN linux.old/drivers/net/Makefile linux.dev/drivers/net/Makefile obj-$(CONFIG_ROADRUNNER) += rrunner.o obj-$(CONFIG_HAPPYMEAL) += sunhme.o -diff -urN linux.old/drivers/net/rc32434_eth.h linux.dev/drivers/net/rc32434_eth.h ---- linux.old/drivers/net/rc32434_eth.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/net/rc32434_eth.h 2006-12-14 03:18:45.000000000 +0100 -@@ -0,0 +1,178 @@ -+/************************************************************************** -+ * -+ * BRIEF MODULE DESCRIPTION -+ * Definitions for IDT RC32434 on-chip ethernet controller. -+ * -+ * Copyright 2004 IDT Inc. (rischelp@idt.com) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED -+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF -+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN -+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, -+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT -+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF -+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON -+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF -+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ * -+ ************************************************************************** -+ * May 2004 rkt, neb -+ * -+ * Initial Release -+ * -+ * Aug 2004 -+ * -+ * Added NAPI -+ * -+ ************************************************************************** -+ */ -+ -+ -+#include -+#include -+#include -+ -+#define CONFIG_IDT_USE_NAPI 1 -+#define RC32434_DEBUG 2 -+//#define RC32434_PROC_DEBUG -+#undef RC32434_DEBUG -+ -+#ifdef RC32434_DEBUG -+ -+/* use 0 for production, 1 for verification, >2 for debug */ -+static int rc32434_debug = RC32434_DEBUG; -+#define ASSERT(expr) \ -+ if(!(expr)) { \ -+ printk( "Assertion failed! %s,%s,%s,line=%d\n", \ -+ #expr,__FILE__,__FUNCTION__,__LINE__); } -+#define DBG(lvl, format, arg...) if (rc32434_debug > lvl) printk(KERN_INFO "%s: " format, dev->name , ## arg) -+#else -+#define ASSERT(expr) do {} while (0) -+#define DBG(lvl, format, arg...) do {} while (0) -+#endif -+ -+#define INFO(format, arg...) printk(KERN_INFO "%s: " format, dev->name , ## arg) -+#define ERR(format, arg...) printk(KERN_ERR "%s: " format, dev->name , ## arg) -+#define WARN(format, arg...) printk(KERN_WARNING "%s: " format, dev->name , ## arg) -+ -+/* the following must be powers of two */ -+#ifdef CONFIG_IDT_USE_NAPI -+#define RC32434_NUM_RDS 64 /* number of receive descriptors */ -+#define RC32434_NUM_TDS 64 /* number of transmit descriptors */ -+#else -+#define RC32434_NUM_RDS 128 /* number of receive descriptors */ -+#define RC32434_NUM_TDS 128 /* number of transmit descriptors */ -+#endif -+ -+#define RC32434_RBSIZE 1536 /* size of one resource buffer = Ether MTU */ -+#define RC32434_RDS_MASK (RC32434_NUM_RDS-1) -+#define RC32434_TDS_MASK (RC32434_NUM_TDS-1) -+#define RD_RING_SIZE (RC32434_NUM_RDS * sizeof(struct DMAD_s)) -+#define TD_RING_SIZE (RC32434_NUM_TDS * sizeof(struct DMAD_s)) -+ -+#define RC32434_TX_TIMEOUT HZ * 100 -+ -+#define rc32434_eth0_regs ((ETH_t)(ETH0_VirtualAddress)) -+#define rc32434_eth1_regs ((ETH_t)(ETH1_VirtualAddress)) -+ -+enum status { filled, empty}; -+#define IS_DMA_FINISHED(X) (((X) & (DMAD_f_m)) != 0) -+#define IS_DMA_DONE(X) (((X) & (DMAD_d_m)) != 0) -+ -+ -+/* Information that need to be kept for each board. */ -+struct rc32434_local { -+ ETH_t eth_regs; -+ DMA_Chan_t rx_dma_regs; -+ DMA_Chan_t tx_dma_regs; -+ volatile DMAD_t td_ring; /* transmit descriptor ring */ -+ volatile DMAD_t rd_ring; /* receive descriptor ring */ -+ -+ struct sk_buff* tx_skb[RC32434_NUM_TDS]; /* skbuffs for pkt to trans */ -+ struct sk_buff* rx_skb[RC32434_NUM_RDS]; /* skbuffs for pkt to trans */ -+ -+#ifndef CONFIG_IDT_USE_NAPI -+ struct tasklet_struct * rx_tasklet; -+#endif -+ struct tasklet_struct * tx_tasklet; -+ -+ int rx_next_done; -+ int rx_chain_head; -+ int rx_chain_tail; -+ enum status rx_chain_status; -+ -+ int tx_next_done; -+ int tx_chain_head; -+ int tx_chain_tail; -+ enum status tx_chain_status; -+ int tx_count; -+ int tx_full; -+ -+ struct timer_list mii_phy_timer; -+ unsigned long duplex_mode; -+ -+ int rx_irq; -+ int tx_irq; -+ int ovr_irq; -+ int und_irq; -+ -+ struct net_device_stats stats; -+ spinlock_t lock; -+ -+ /* debug /proc entry */ -+ struct proc_dir_entry *ps; -+ int dma_halt_cnt; int dma_run_cnt; -+}; -+ -+extern unsigned int idt_cpu_freq; -+ -+/* Index to functions, as function prototypes. */ -+static int rc32434_open(struct net_device *dev); -+static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev); -+static void rc32434_mii_handler(unsigned long data); -+static irqreturn_t rc32434_und_interrupt(int irq, void *dev_id); -+static irqreturn_t rc32434_rx_dma_interrupt(int irq, void *dev_id); -+static irqreturn_t rc32434_tx_dma_interrupt(int irq, void *dev_id); -+#ifdef RC32434_REVISION -+static irqreturn_t rc32434_ovr_interrupt(int irq, void *dev_id); -+#endif -+static int rc32434_close(struct net_device *dev); -+static struct net_device_stats *rc32434_get_stats(struct net_device *dev); -+static void rc32434_multicast_list(struct net_device *dev); -+static int rc32434_init(struct net_device *dev); -+static void rc32434_tx_timeout(struct net_device *dev); -+ -+static void rc32434_tx_tasklet(unsigned long tx_data_dev); -+#ifdef CONFIG_IDT_USE_NAPI -+static int rc32434_poll(struct net_device *rx_data_dev, int *budget); -+#else -+static void rc32434_rx_tasklet(unsigned long rx_data_dev); -+#endif -+static void rc32434_cleanup_module(void); -+ -+ -+static inline void rc32434_abort_dma(struct net_device *dev, DMA_Chan_t ch) -+{ -+ if (__raw_readl(&ch->dmac) & DMAC_run_m) { -+ __raw_writel(0x10, &ch->dmac); -+ -+ while (!(__raw_readl(&ch->dmas) & DMAS_h_m)) -+ dev->trans_start = jiffies; -+ -+ __raw_writel(0, &ch->dmas); -+ } -+ -+ __raw_writel(0, &ch->dmadptr); -+ __raw_writel(0, &ch->dmandptr); -+} + diff --git a/target/linux/rb532-2.6/patches/120-cf.patch b/target/linux/rb532-2.6/patches/120-cf.patch index f702753c7d..19395ef664 100644 --- a/target/linux/rb532-2.6/patches/120-cf.patch +++ b/target/linux/rb532-2.6/patches/120-cf.patch @@ -23,989 +23,4 @@ diff -urN linux.old/drivers/block/Makefile linux.dev/drivers/block/Makefile obj-$(CONFIG_BLK_DEV_UB) += ub.o +obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/ -diff -urN linux.old/drivers/block/rb500/ata.c linux.dev/drivers/block/rb500/ata.c ---- linux.old/drivers/block/rb500/ata.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/block/rb500/ata.c 2006-10-26 00:11:14.000000000 +0200 -@@ -0,0 +1,485 @@ -+/* CF-mips driver -+ This is a block driver for the direct (mmaped) interface to the CF-slot, -+ found in Routerboard.com's RB532 board -+ See SDK provided from routerboard.com. -+ -+ Module adapted By P.Christeas , 2005-6. -+ Cleaned up and adapted to platform_device by Felix Fietkau -+ -+ This work is redistributed under the terms of the GNU General Public License. -+*/ -+ -+#include /* printk() */ -+#include /* module to be loadable */ -+#include -+#include -+#include -+#include /* request_mem_region() */ -+#include /* ioremap() */ -+#include /* ioremap() */ -+#include -+ -+#include "ata.h" -+ -+#define REQUEST_MEM_REGION 0 -+#define DEBUG 1 -+ -+#if DEBUG -+#define DEBUGP printk -+#else -+#define DEBUGP(format, args...) -+#endif -+ -+#define SECS 1000000 /* unit for wait_not_busy() is 1us */ -+ -+unsigned cf_head = 0; -+unsigned cf_cyl = 0; -+unsigned cf_spt = 0; -+unsigned cf_sectors = 0; -+static unsigned cf_block_size = 1; -+static void *baddr = 0; -+ -+#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET)) -+ -+ -+static void cf_do_tasklet(unsigned long dev_l); -+ -+ -+static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev) -+{ -+ writeb(val, dev->baddr + ATA_REG_OFFSET + reg); -+} -+ -+static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev) -+{ -+ return readb(dev->baddr + ATA_REG_OFFSET + reg); -+} -+ -+static inline int get_gpio_bit(gpio_func ofs, struct cf_mips_dev *dev) -+{ -+ return (gpio_get(ofs) >> dev->pin) & 1; -+} -+ -+static inline void set_gpio_bit(int bit, gpio_func ofs, struct cf_mips_dev *dev) -+{ -+ gpio_set(ofs, (1 << dev->pin), ((bit & 1) << dev->pin)); -+} -+ -+static inline int cfrdy(struct cf_mips_dev *dev) -+{ -+ return get_gpio_bit(DATA, dev); -+} -+ -+static inline void prepare_cf_irq(struct cf_mips_dev *dev) -+{ -+ set_gpio_bit(1, ILEVEL, dev); /* interrupt on cf ready (not busy) */ -+ set_gpio_bit(0, ISTAT, dev); /* clear interrupt status */ -+} -+ -+static inline int cf_present(struct cf_mips_dev* dev) -+{ -+ /* TODO: read and configure CIS into memory mapped mode -+ * TODO: parse CISTPL_CONFIG on CF+ cards to get base address (0x200) -+ * TODO: maybe adjust power saving setting for Hitachi Microdrive -+ */ -+ int i; -+ -+ /* setup CFRDY GPIO as input */ -+ set_gpio_bit(0, FUNC, dev); -+ set_gpio_bit(0, CFG, dev); -+ -+ for (i = 0; i < 0x10; ++i) { -+ if (rareg(i,dev) != 0xff) -+ return 1; -+ } -+ return 0; -+} -+ -+static inline int is_busy(struct cf_mips_dev *dev) -+{ -+ return !cfrdy(dev); -+} -+ -+static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev) -+{ -+ int us_passed = 0; -+ if (wait_for_busy && !is_busy(dev)) { -+ /* busy must appear within 400ns, -+ * but it may dissapear before we see it -+ * => must not wait for busy in a loop -+ */ -+ ndelay(400); -+ } -+ -+ do { -+ if (us_passed) -+ udelay(1); /* never reached in async mode */ -+ if (!is_busy(dev)) { -+ if (us_passed > 1 * SECS) { -+ printk(KERN_WARNING "cf-mips: not busy ok (after %dus)" -+ ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev)); -+ } -+ return CF_TRANS_OK; -+ } -+ if (us_passed == 1 * SECS) { -+ printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us); -+ } -+ if (dev->async_mode) { -+ dev->to_timer.expires = jiffies + (to_us * HZ / SECS); -+ dev->irq_enable_time = jiffies; -+ prepare_cf_irq(dev); -+ if (is_busy(dev)) { -+ add_timer(&dev->to_timer); -+ enable_irq(dev->irq); -+ return CF_TRANS_IN_PROGRESS; -+ } -+ continue; -+ } -+ ++us_passed; -+ } while (us_passed < to_us); -+ -+ printk(KERN_ERR "cf-mips: wait not busy timeout (%dus)" -+ ", status 0x%02x, state %d\n", -+ to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate); -+ return CF_TRANS_FAILED; -+} -+ -+static irqreturn_t cf_irq_handler(int irq, void *dev_id) -+{ -+ /* While tasklet has not disabled irq, irq will be retried all the time -+ * because of ILEVEL matching GPIO pin status => deadlock. -+ * To avoid this, we change ILEVEL to 0. -+ */ -+ struct cf_mips_dev *dev=dev_id; -+ -+ set_gpio_bit(0, ILEVEL, dev); -+ set_gpio_bit(0, ISTAT, dev); -+ -+ del_timer(&dev->to_timer); -+ tasklet_schedule(&dev->tasklet); -+ return IRQ_HANDLED; -+} -+ -+static int do_reset(struct cf_mips_dev *dev) -+{ -+ printk(KERN_INFO "cf-mips: resetting..\n"); -+ -+ wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev); -+ udelay(1); /* FIXME: how long should we wait here? */ -+ wareg(0, ATA_REG_DC,dev); -+ -+ return wait_not_busy(30 * SECS, 1,dev); -+} -+ -+static int set_multiple(struct cf_mips_dev *dev) -+{ -+ if (dev->block_size <= 1) -+ return CF_TRANS_OK; -+ -+ wareg(dev->block_size, ATA_REG_SC,dev); -+ wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev); -+ wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev); -+ -+ return wait_not_busy(10 * SECS, 1,dev); -+} -+ -+static int set_cmd(struct cf_mips_dev *dev) -+{ -+ //DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd); -+ // sector_count should be <=24 bits.. -+ BUG_ON(dev->tsect_start>=0x10000000); -+ // This way, it addresses 2^24 * 512 = 128G -+ -+ if (dev->tsector_count) { -+ wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev); -+ wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev); -+ wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev); -+ wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev); -+ } -+ wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA, -+ ATA_REG_DH,dev); /* select drive on all commands */ -+ wareg(dev->tcmd, ATA_REG_CMD,dev); -+ return wait_not_busy(10 * SECS, 1,dev); -+} -+ -+static int do_trans(struct cf_mips_dev *dev) -+{ -+ int res; -+ unsigned st; -+ int transfered; -+ -+ //printk("do_trans: %d sectors left\n",dev->tsectors_left); -+ while (dev->tsectors_left) { -+ transfered = 0; -+ -+ st = rareg(ATA_REG_ST,dev); -+ if (!(st & ATA_REG_ST_DRQ)) { -+ printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st); -+ if (st & ATA_REG_ST_ERR) { -+ int errId = rareg(ATA_REG_ERR,dev); -+ printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n", -+ (dev->tread ? "read" : "write"), st, errId); -+ } -+ return CF_TRANS_FAILED; -+ } -+ do { /* Fill/read the buffer one block */ -+ u32 *qbuf, *qend; -+ qbuf = (u32 *)dev->tbuf; -+ qend = qbuf + CF_SECT_SIZE / sizeof(u32); -+ if (dev->tread) { -+ while (qbuf!=qend) -+ put_unaligned(*DBUF32,qbuf++); -+ //*(qbuf++) = *DBUF32; -+ } -+ else { -+ while(qbuf!=qend) -+ *DBUF32 = get_unaligned(qbuf++); -+ } -+ -+ dev->tsectors_left--; -+ dev->tbuf += CF_SECT_SIZE; -+ dev->tbuf_size -= CF_SECT_SIZE; -+ transfered++; -+ } while (transfered != dev->block_size && dev->tsectors_left > 0); -+ -+ res = wait_not_busy(10 * SECS, 1,dev); -+ if (res != CF_TRANS_OK) -+ return res; -+ }; -+ -+ st = rareg(ATA_REG_ST,dev); -+ if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) { -+ if (st & ATA_REG_ST_DRQ) { -+ printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s" -+ ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st); -+ } else if (st & ATA_REG_ST_DWF) { -+ printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st); -+ } else { -+ int errId = rareg(ATA_REG_ERR,dev); -+ printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n", -+ (dev->tread ? "read" : "write"), st, errId); -+ } -+ return CF_TRANS_FAILED; -+ } -+ return CF_TRANS_OK; -+} -+ -+static int cf_do_state(struct cf_mips_dev *dev) -+{ -+ int res; -+ switch (dev->tstate) { /* fall through everywhere */ -+ case TS_IDLE: -+ dev->tstate = TS_READY; -+ if (is_busy(dev)) { -+ dev->tstate = TS_AFTER_RESET; -+ res = do_reset(dev); -+ if (res != CF_TRANS_OK) -+ break; -+ } -+ case TS_AFTER_RESET: -+ if (dev->tstate == TS_AFTER_RESET) { -+ dev->tstate = TS_READY; -+ res = set_multiple(dev); -+ if (res != CF_TRANS_OK) -+ break; -+ } -+ case TS_READY: -+ dev->tstate = TS_CMD; -+ res = set_cmd(dev); -+ if (res != CF_TRANS_OK) -+ break;; -+ case TS_CMD: -+ dev->tstate = TS_TRANS; -+ case TS_TRANS: -+ res = do_trans(dev); -+ break; -+ default: -+ printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate); -+ return CF_TRANS_FAILED; -+ } -+ if (res != CF_TRANS_IN_PROGRESS) -+ dev->tstate = TS_IDLE; -+ return res; -+} -+ -+static void cf_do_tasklet(unsigned long dev_l) -+{ -+ struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l; -+ int res; -+ -+ disable_irq(dev->irq); -+ -+ if (dev->tstate == TS_IDLE) -+ return; /* can happen when irq is first registered */ -+ -+#if 0 -+ DEBUGP(KERN_WARNING "cf-mips: not busy ok (tasklet) status 0x%02x\n", -+ (unsigned) rareg(ATA_REG_ST,dev)); -+#endif -+ -+ res = cf_do_state(dev); -+ if (res == CF_TRANS_IN_PROGRESS) -+ return; -+ cf_async_trans_done(dev,res); -+} -+ -+static void cf_async_timeout(unsigned long dev_l) -+{ -+ struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l; -+ disable_irq(dev->irq); -+ /* Perhaps send abort to the device? */ -+ printk(KERN_ERR "cf-mips: wait not busy timeout (%lus)" -+ ", status 0x%02x, state %d\n", -+ jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate); -+ dev->tstate = TS_IDLE; -+ cf_async_trans_done(dev,CF_TRANS_FAILED); -+} -+ -+int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, -+ char* buffer, int is_write) -+{ -+ BUG_ON(dev->tstate!=TS_IDLE); -+ if (nsect > ATA_MAX_SECT_PER_CMD) { -+ printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect); -+ return CF_TRANS_FAILED; -+ } -+ if (sector + nsect > dev->sectors) { -+ printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector); -+ return CF_TRANS_FAILED; -+ } -+ dev->tbuf = buffer; -+ dev->tbuf_size = nsect*512; -+ dev->tsect_start = sector; -+ dev->tsector_count = nsect; -+ dev->tsectors_left = dev->tsector_count; -+ dev->tread = (is_write)?0:1; -+ -+ dev->tcmd = (dev->block_size == 1 ? -+ (is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) : -+ (is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE)); -+ -+ return cf_do_state(dev); -+} -+ -+static int do_identify(struct cf_mips_dev *dev) -+{ -+ u16 sbuf[CF_SECT_SIZE >> 1]; -+ int res; -+ char tstr[17]; //serial -+ BUG_ON(dev->tstate!=TS_IDLE); -+ dev->tbuf = (char *) sbuf; -+ dev->tbuf_size = CF_SECT_SIZE; -+ dev->tsect_start = 0; -+ dev->tsector_count = 0; -+ dev->tsectors_left = 1; -+ dev->tread = 1; -+ dev->tcmd = ATA_CMD_IDENTIFY_DRIVE; -+ -+ DEBUGP(KERN_INFO "cf-mips: identify drive..\n"); -+ res = cf_do_state(dev); -+ if (res == CF_TRANS_IN_PROGRESS) { -+ printk(KERN_ERR "cf-mips: BUG: async identify cmd\n"); -+ return CF_TRANS_FAILED; -+ } -+ if (res != CF_TRANS_OK) -+ return 0; -+ -+ dev->head = sbuf[3]; -+ dev->cyl = sbuf[1]; -+ dev->spt = sbuf[6]; -+ dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8]; -+ dev->dtype=sbuf[0]; -+ memcpy(tstr,&sbuf[12],16); -+ tstr[16]=0; -+ printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n", -+ (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head, -+ dev->spt, dev->sectors, dev->sectors >> 11,tstr); -+ return 1; -+} -+ -+static void init_multiple(struct cf_mips_dev * dev) -+{ -+ int res; -+ DEBUGP(KERN_INFO "cf-mips: detecting block size\n"); -+ -+ dev->block_size = 128; /* max block size = 128 sectors (64KB) */ -+ do { -+ wareg(dev->block_size, ATA_REG_SC,dev); -+ wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev); -+ wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev); -+ -+ res = wait_not_busy(10 * SECS, 1,dev); -+ if (res != CF_TRANS_OK) { -+ printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n"); -+ dev->block_size = 1; -+ return; -+ } -+ if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0) -+ break; -+ dev->block_size /= 2; -+ } while (dev->block_size > 1); -+ -+ printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size); -+} -+ -+int cf_init(struct cf_mips_dev *dev) -+{ -+ tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev); -+ dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE); -+ if (!dev->baddr) { -+ printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n", -+ (unsigned long) dev->base, CFDEV_BUF_SIZE); -+ return -EBUSY; -+ } -+ -+ if (!cf_present(dev)) { -+ printk(KERN_WARNING "cf-mips: cf card not present\n"); -+ iounmap(dev->baddr); -+ return -ENODEV; -+ } -+ -+ if (do_reset(dev) != CF_TRANS_OK) { -+ printk(KERN_ERR "cf-mips: cf reset failed\n"); -+ iounmap(dev->baddr); -+ return -EBUSY; -+ } -+ -+ if (!do_identify(dev)) { -+ printk(KERN_ERR "cf-mips: cf identify failed\n"); -+ iounmap(dev->baddr); -+ return -EBUSY; -+ } -+ -+/* set_apm_level(ATA_APM_WITH_STANDBY); */ -+ init_multiple(dev); -+ -+ init_timer(&dev->to_timer); -+ dev->to_timer.function = cf_async_timeout; -+ dev->to_timer.data = (unsigned long)dev; -+ -+ prepare_cf_irq(dev); -+ if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) { -+ printk(KERN_ERR "cf-mips: failed to get irq\n"); -+ iounmap(dev->baddr); -+ return -EBUSY; -+ } -+ /* Disable below would be odd, because request will enable, and the tasklet -+ will disable it itself */ -+ //disable_irq(dev->irq); -+ -+ dev->async_mode = 1; -+ -+ return 0; -+} -+ -+void cf_cleanup(struct cf_mips_dev *dev) -+{ -+ iounmap(dev->baddr); -+ free_irq(dev->irq, NULL); -+#if REQUEST_MEM_REGION -+ release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE); -+#endif -+} -+ -+ -+/*eof*/ -diff -urN linux.old/drivers/block/rb500/ata.h linux.dev/drivers/block/rb500/ata.h ---- linux.old/drivers/block/rb500/ata.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/block/rb500/ata.h 2006-10-26 00:11:14.000000000 +0200 -@@ -0,0 +1,143 @@ -+/* CF-mips driver -+ This is a block driver for the direct (mmaped) interface to the CF-slot, -+ found in Routerboard.com's RB532 board -+ See SDK provided from routerboard.com. -+ -+ Module adapted By P.Christeas , 2005-6. -+ Cleaned up and adapted to platform_device by Felix Fietkau -+ -+ This work is redistributed under the terms of the GNU General Public License. -+*/ -+ -+#ifndef __CFMIPS_ATA_H__ -+#define __CFMIPS_ATA_H__ -+ -+#include -+ -+#define CFG_DC_DEV1 (void*)0xb8010010 -+#define CFG_DC_DEVBASE 0x0 -+#define CFG_DC_DEVMASK 0x4 -+#define CFG_DC_DEVC 0x8 -+#define CFG_DC_DEVTC 0xC -+ -+#define CFDEV_BUF_SIZE 0x1000 -+#define ATA_CIS_OFFSET 0x200 -+#define ATA_REG_OFFSET 0x800 -+#define ATA_DBUF_OFFSET 0xC00 -+ -+#define ATA_REG_FEAT 0x1 -+#define ATA_REG_SC 0x2 -+#define ATA_REG_SN 0x3 -+#define ATA_REG_CL 0x4 -+#define ATA_REG_CH 0x5 -+#define ATA_REG_DH 0x6 -+#define ATA_REG_DH_BASE 0xa0 -+#define ATA_REG_DH_LBA 0x40 -+#define ATA_REG_DH_DRV 0x10 -+#define ATA_REG_CMD 0x7 -+#define ATA_REG_ST 0x7 -+#define ATA_REG_ST_BUSY 0x80 -+#define ATA_REG_ST_RDY 0x40 -+#define ATA_REG_ST_DWF 0x20 -+#define ATA_REG_ST_DSC 0x10 -+#define ATA_REG_ST_DRQ 0x08 -+#define ATA_REG_ST_CORR 0x04 -+#define ATA_REG_ST_ERR 0x01 -+#define ATA_REG_ERR 0xd -+#define ATA_REG_DC 0xe -+#define ATA_REG_DC_IEN 0x02 -+#define ATA_REG_DC_SRST 0x04 -+ -+#define ATA_CMD_READ_SECTORS 0x20 -+#define ATA_CMD_WRITE_SECTORS 0x30 -+#define ATA_CMD_EXEC_DRIVE_DIAG 0x90 -+#define ATA_CMD_READ_MULTIPLE 0xC4 -+#define ATA_CMD_WRITE_MULTIPLE 0xC5 -+#define ATA_CMD_SET_MULTIPLE 0xC6 -+#define ATA_CMD_IDENTIFY_DRIVE 0xEC -+#define ATA_CMD_SET_FEATURES 0xEF -+ -+#define ATA_FEATURE_ENABLE_APM 0x05 -+#define ATA_FEATURE_DISABLE_APM 0x85 -+#define ATA_APM_DISABLED 0x00 -+#define ATA_APM_MIN_POWER 0x01 -+#define ATA_APM_WITH_STANDBY 0x7f -+#define ATA_APM_WITHOUT_STANDBY 0x80 -+#define ATA_APM_MAX_PERFORMANCE 0xfe -+ -+#define CF_SECT_SIZE 0x200 -+/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */ -+#define CF_KERNEL_MUL 1 -+#define ATA_MAX_SECT_PER_CMD 0x100 -+ -+#define CF_TRANS_FAILED 0 -+#define CF_TRANS_OK 1 -+#define CF_TRANS_IN_PROGRESS 2 -+ -+ -+enum trans_state { -+ TS_IDLE = 0, -+ TS_AFTER_RESET, -+ TS_READY, -+ TS_CMD, -+ TS_TRANS -+}; -+ -+// -+// #if DEBUG -+// static unsigned long busy_time; -+// #endif -+ -+/** Struct to hold the cfdev -+Actually, all the data here only has one instance. However, for -+reasons of programming conformity, it is passed around as a pointer -+*/ -+struct cf_mips_dev { -+ void *base; /* base address for I/O */ -+ void *baddr; /* remapped address */ -+ -+ int pin; /* gpio pin */ -+ int irq; /* gpio irq */ -+ -+ unsigned head; -+ unsigned cyl; -+ unsigned spt; -+ unsigned sectors; -+ -+ unsigned short block_size; -+ unsigned dtype ; // ATA or CF -+ struct request_queue *queue; -+ struct gendisk *gd; -+ -+ /* Transaction state */ -+ enum trans_state tstate; -+ char *tbuf; -+ unsigned long tbuf_size; -+ sector_t tsect_start; -+ unsigned tsector_count; -+ unsigned tsectors_left; -+ int tread; -+ unsigned tcmd; -+ int async_mode; -+ unsigned long irq_enable_time; -+ -+ struct request *active_req; /* A request is being carried out. Is that different from tstate? */ -+ int users; -+ struct timer_list to_timer; -+ struct tasklet_struct tasklet; -+ -+ /** This lock ensures that the requests to this device are all done -+ atomically. Transfers can run in parallel, requests are all queued -+ one-by-one */ -+ spinlock_t lock; -+}; -+ -+int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect, -+ char* buffer, int is_write); -+int cf_init(struct cf_mips_dev* dev); -+void cf_cleanup(struct cf_mips_dev* dev); -+ -+void cf_async_trans_done(struct cf_mips_dev* dev, int result); -+// void *cf_get_next_buf(unsigned long *buf_size); -+ -+#endif -diff -urN linux.old/drivers/block/rb500/bdev.c linux.dev/drivers/block/rb500/bdev.c ---- linux.old/drivers/block/rb500/bdev.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/block/rb500/bdev.c 2006-10-26 00:11:14.000000000 +0200 -@@ -0,0 +1,339 @@ -+/* CF-mips driver -+ This is a block driver for the direct (mmaped) interface to the CF-slot, -+ found in Routerboard.com's RB532 board -+ See SDK provided from routerboard.com. -+ -+ Module adapted By P.Christeas , 2005-6. -+ Cleaned up and adapted to platform_device by Felix Fietkau -+ -+ This work is redistributed under the terms of the GNU General Public License. -+*/ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+ -+#include -+ -+#ifdef DEBUG -+#define DEBUGP printk -+#define DLEVEL 1 -+#else -+#define DEBUGP(format, args...) -+#define DLEVEL 0 -+#endif -+ -+#define CF_MIPS_MAJOR 13 -+#define MAJOR_NR CF_MIPS_MAJOR -+#define CF_MAX_PART 16 /* max 15 partitions */ -+ -+#include "ata.h" -+ -+//extern struct block_device_operations cf_bdops; -+ -+// static struct hd_struct cf_parts[CF_MAX_PART]; -+// static int cf_part_sizes[CF_MAX_PART]; -+// static int cf_hsect_sizes[CF_MAX_PART]; -+// static int cf_max_sectors[CF_MAX_PART]; -+// static int cf_blksize_sizes[CF_MAX_PART]; -+ -+// static spinlock_t lock = SPIN_LOCK_UNLOCKED; -+ -+// volatile int cf_busy = 0; -+ -+static struct request *active_req = NULL; -+ -+static int cf_open (struct inode *, struct file *); -+static int cf_release (struct inode *, struct file *); -+static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long); -+ -+static void cf_request(request_queue_t * q); -+static int cf_transfer(const struct request *req); -+ -+/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long); -+long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/ -+// int (*direct_access) (struct block_device *, sector_t, unsigned long *); -+// int (*media_changed) (struct gendisk *); -+// int (*revalidate_disk) (struct gendisk *); -+ -+static struct block_device_operations cf_bdops = { -+ .owner = THIS_MODULE, -+ .open = cf_open, -+ .release = cf_release, -+ .ioctl = cf_ioctl, -+ .media_changed = NULL, -+ .unlocked_ioctl = NULL, -+ .revalidate_disk = NULL, -+ .compat_ioctl = NULL, -+ .direct_access = NULL -+}; -+ -+ -+int cf_mips_probe(struct platform_device *pdev) -+{ -+ struct gendisk* cf_gendisk=NULL; -+ struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data; -+ struct cf_mips_dev *dev; -+ struct resource *r; -+ int reg_result; -+ -+ reg_result = register_blkdev(MAJOR_NR, "cf-mips"); -+ if (reg_result < 0) { -+ printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR); -+ return reg_result; -+ } -+ -+ dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL); -+ if (!dev) -+ goto out_err; -+ memset(dev, 0, sizeof(struct cf_mips_dev)); -+ cdev->dev = dev; -+ -+ dev->pin = cdev->gpio_pin; -+ dev->irq = platform_get_irq_byname(pdev, "cf_irq"); -+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase"); -+ dev->base = (void *) r->start; -+ -+ if (cf_init(dev)) goto out_err; -+ printk("init done"); -+ -+ spin_lock_init(&dev->lock); -+ dev->queue = blk_init_queue(cf_request,&dev->lock); -+ if (!dev->queue){ -+ printk(KERN_ERR "cf-mips: no mem for queue\n"); -+ goto out_err; -+ } -+ blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD); -+ -+ /* For memory devices, it is always better to avoid crossing segments -+ inside the same request. */ -+/* if (dev->dtype==0x848A){ -+ printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1); -+ blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1); -+ }*/ -+ -+ dev->gd = alloc_disk(CF_MAX_PART); -+ cf_gendisk = dev->gd; -+ cdev->gd = dev->gd; -+ if (!cf_gendisk) goto out_err; /* Last of these goto's */ -+ -+ cf_gendisk->major = MAJOR_NR; -+ cf_gendisk->first_minor = 0; -+ cf_gendisk->queue=dev->queue; -+ BUG_ON(cf_gendisk->minors != CF_MAX_PART); -+ strcpy(cf_gendisk->disk_name,"cfa"); -+ cf_gendisk->fops = &cf_bdops; -+ cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */ -+ cf_gendisk->private_data=dev; -+ -+ set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL); -+ -+ /* Let the disk go live */ -+ add_disk(cf_gendisk); -+#if 0 -+ result = cf_init(); -+ -+ /* default cfg for all partitions */ -+ memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART); -+ memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART); -+ for (i = 0; i < CF_MAX_PART; ++i) { -+ cf_hsect_sizes[i] = CF_SECT_SIZE; -+ cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD; -+ cf_blksize_sizes[i] = BLOCK_SIZE; -+ } -+ -+ /* setup info for whole disk (partition 0) */ -+ cf_part_sizes[0] = cf_sectors / 2; -+ cf_parts[0].nr_sects = cf_sectors; -+ -+ blk_size[MAJOR_NR] = cf_part_sizes; -+ blksize_size[MAJOR_NR] = cf_blksize_sizes; -+ max_sectors[MAJOR_NR] = cf_max_sectors; -+ hardsect_size[MAJOR_NR] = cf_hsect_sizes; -+ read_ahead[MAJOR_NR] = 8; /* (4kB) */ -+ -+ blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST); -+ -+ add_gendisk(&cf_gendisk); -+#endif -+// printk(KERN_INFO "cf-mips partition check: \n"); -+// register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART, -+// &cf_bdops, dev->sectors); -+ return 0; -+ -+out_err: -+ if (dev->queue){ -+ blk_cleanup_queue(dev->queue); -+ } -+ if (reg_result) { -+ unregister_blkdev(MAJOR_NR, "cf-mips"); -+ return reg_result; -+ } -+ if (dev){ -+ cf_cleanup(dev); -+ kfree(dev); -+ } -+ return 1; -+} -+ -+static int -+cf_mips_remove(struct platform_device *pdev) -+{ -+ struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data; -+ struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev; -+ -+ unregister_blkdev(MAJOR_NR, "cf-mips"); -+ blk_cleanup_queue(dev->queue); -+ -+ del_gendisk(dev->gd); -+ cf_cleanup(dev); -+ return 0; -+} -+ -+ -+static struct platform_driver cf_driver = { -+ .driver.name = "rb500-cf", -+ .probe = cf_mips_probe, -+ .remove = cf_mips_remove, -+}; -+ -+static int __init cf_mips_init(void) -+{ -+ printk(KERN_INFO "cf-mips module loaded\n"); -+ return platform_driver_register(&cf_driver); -+} -+ -+static void cf_mips_cleanup(void) -+{ -+ platform_driver_unregister(&cf_driver); -+ printk(KERN_INFO "cf-mips module removed\n"); -+} -+ -+module_init(cf_mips_init); -+module_exit(cf_mips_cleanup); -+ -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR); -+ -+ -+static int cf_open(struct inode *inode, struct file *filp) -+{ -+ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; -+ int minor = MINOR(inode->i_rdev); -+ -+ if (minor >= CF_MAX_PART) -+ return -ENODEV; -+ //DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor); -+ spin_lock(&dev->lock); -+ dev->users++; -+ spin_unlock(&dev->lock); -+ filp->private_data=dev; -+ -+ /* dirty workaround to set CFRDY GPIO as an input when some other -+ program sets it as an output */ -+ gpio_set(CFG, (1 << dev->pin), 0); -+ return 0; /* success */ -+} -+ -+static int cf_release(struct inode *inode, struct file *filp) -+{ -+ int minor = MINOR(inode->i_rdev); -+ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; -+ spin_lock(&dev->lock); -+ dev->users--; -+ spin_unlock(&dev->lock); -+ return 0; -+} -+ -+static int cf_ioctl(struct inode *inode, struct file *filp, -+ unsigned int cmd, unsigned long arg) -+{ -+ unsigned minor = MINOR(inode->i_rdev); -+ struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data; -+ -+ DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd); -+ switch (cmd) { -+ case BLKRRPART: /* re-read partition table */ -+ if (!capable(CAP_SYS_ADMIN)) -+ return -EACCES; -+ printk(KERN_INFO "cf-mips partition check: \n"); -+ register_disk(dev->gd); -+ return 0; -+ -+ case HDIO_GETGEO: -+ { -+ struct hd_geometry geo; -+ geo.cylinders = dev->cyl; -+ geo.heads = dev->head; -+ geo.sectors = dev->spt; -+ geo.start = (*dev->gd->part)[minor].start_sect; -+ if (copy_to_user((void *) arg, &geo, sizeof (geo))) -+ return -EFAULT; -+ } -+ return 0; -+ } -+ -+ return -EINVAL; /* unknown command */ -+} -+ -+static void cf_request(request_queue_t * q) -+{ -+ struct cf_mips_dev* dev; -+ -+ struct request * req; -+ int status; -+ -+ /* We could have q->queuedata = dev , but haven't yet. */ -+ if (active_req) -+ return; -+ -+ while ((req=elv_next_request(q))!=NULL){ -+ dev=req->rq_disk->private_data; -+ status=cf_transfer(req); -+ if (status==CF_TRANS_IN_PROGRESS){ -+ active_req=req; -+ return; -+ } -+ end_request(req,status); -+ } -+} -+ -+static int cf_transfer(const struct request *req) -+{ -+ struct cf_mips_dev* dev=req->rq_disk->private_data; -+ -+ if (!blk_fs_request(req)){ -+ if (printk_ratelimit()) -+ printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]); -+ return CF_TRANS_FAILED; -+ } -+ -+ return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req)); -+} -+ -+void cf_async_trans_done(struct cf_mips_dev * dev,int result) -+{ -+ struct request *req; -+ -+ spin_lock(&dev->lock); -+ req=active_req; -+ active_req=NULL; -+ end_request(req,result); -+ spin_unlock(&dev->lock); -+ -+ spin_lock(&dev->lock); -+ cf_request(dev->queue); -+ spin_unlock(&dev->lock); -+} -+ -diff -urN linux.old/drivers/block/rb500/Makefile linux.dev/drivers/block/rb500/Makefile ---- linux.old/drivers/block/rb500/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/block/rb500/Makefile 2006-10-26 00:11:14.000000000 +0200 -@@ -0,0 +1,3 @@ -+## Makefile for the RB532 CF port -+ -+obj-y += bdev.o ata.o + diff --git a/target/linux/rb532-2.6/patches/140-cmdline_hack.patch b/target/linux/rb532-2.6/patches/140-cmdline_hack.patch index 01daf3132c..50c299a657 100644 --- a/target/linux/rb532-2.6/patches/140-cmdline_hack.patch +++ b/target/linux/rb532-2.6/patches/140-cmdline_hack.patch @@ -25,24 +25,4 @@ diff -ur linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S EXPORT(stext) # used for profiling EXPORT(_stext) -diff -ur linux.old/arch/mips/rb500/prom.c linux.dev/arch/mips/rb500/prom.c ---- linux.old/arch/mips/rb500/prom.c 2006-12-06 17:30:27.000000000 +0100 -+++ linux.dev/arch/mips/rb500/prom.c 2006-12-06 17:41:40.000000000 +0100 -@@ -128,6 +128,7 @@ - /* FIXME: STUB */ - } - -+extern char _image_cmdline; - void __init prom_setup_cmdline(void){ - char cmd_line[CL_SIZE]; - char *cp; -@@ -163,6 +164,9 @@ - strcpy(cp,prom_argv[i]); - cp+=strlen(prom_argv[i]); - } -+ *(cp++) = ' '; -+ strcpy(cp,(&_image_cmdline + 8)); -+ cp += strlen(&_image_cmdline); - - i=strlen(arcs_cmdline); - if (i>0){ + diff --git a/target/linux/rb532-2.6/patches/500-Nand.patch b/target/linux/rb532-2.6/patches/500-Nand.patch index f3244817cf..6189ecb8e5 100644 --- a/target/linux/rb532-2.6/patches/500-Nand.patch +++ b/target/linux/rb532-2.6/patches/500-Nand.patch @@ -25,144 +25,4 @@ diff -urN linux.old/drivers/mtd/nand/Makefile linux.dev/drivers/mtd/nand/Makefil obj-$(CONFIG_MTD_NAND_AUTCPU12) += autcpu12.o obj-$(CONFIG_MTD_NAND_EDB7312) += edb7312.o obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o -diff -urN linux.old/drivers/mtd/nand/rbmipsnand.c linux.dev/drivers/mtd/nand/rbmipsnand.c ---- linux.old/drivers/mtd/nand/rbmipsnand.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux.dev/drivers/mtd/nand/rbmipsnand.c 2006-12-14 04:39:52.000000000 +0100 -@@ -0,0 +1,137 @@ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000)) -+ -+#define GPIOF 0x050000 -+#define GPIOC 0x050004 -+#define GPIOD 0x050008 -+ -+#define GPIO_RDY (1 << 0x08) -+#define GPIO_WPX (1 << 0x09) -+#define GPIO_ALE (1 << 0x0a) -+#define GPIO_CLE (1 << 0x0b) -+ -+#define DEV2BASE 0x010020 -+ -+#define LO_WPX (1 << 0) -+#define LO_ALE (1 << 1) -+#define LO_CLE (1 << 2) -+#define LO_CEX (1 << 3) -+#define LO_FOFF (1 << 5) -+#define LO_SPICS (1 << 6) -+#define LO_ULED (1 << 7) -+ -+#define MEM32(x) *((volatile unsigned *) (x)) -+static void __iomem *p_nand; -+ -+extern void changeLatchU5(unsigned char orMask, unsigned char nandMask); -+ -+static int rb500_dev_ready(struct mtd_info *mtd) -+{ -+ return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY; -+} -+ -+/* -+ * hardware specific access to control-lines -+ * -+ * ctrl: -+ * NAND_CLE: bit 2 -> bit 3 -+ * NAND_ALE: bit 3 -> bit 2 -+ */ -+static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd, -+ unsigned int ctrl) -+{ -+ struct nand_chip *chip = mtd->priv; -+ unsigned char orbits, nandbits; -+ -+ if (ctrl & NAND_CTRL_CHANGE) { -+ -+ orbits = (ctrl & NAND_CLE) << 1; -+ orbits |= (ctrl & NAND_ALE) >> 1; -+ -+ nandbits = (~ctrl & NAND_CLE) << 1; -+ nandbits |= (~ctrl & NAND_ALE) >> 1; -+ -+ changeLatchU5(orbits, nandbits); -+ } -+ if (cmd != NAND_CMD_NONE) -+ writeb(cmd, chip->IO_ADDR_W); -+ -+} -+ -+static struct mtd_partition partition_info[] = { -+ { -+ name:"RouterBoard NAND Boot", -+ offset:0, -+ size:4 * 1024 * 1024}, -+ { -+ name:"RouterBoard NAND Main", -+ offset:MTDPART_OFS_NXTBLK, -+ size:MTDPART_SIZ_FULL} -+}; -+ -+static struct mtd_info rmtd; -+static struct nand_chip rnand; -+ -+static unsigned init_ok = 0; -+ -+unsigned get_rbnand_block_size(void) -+{ -+ if (init_ok) -+ return rmtd.writesize; -+ else -+ return 0; -+} -+ -+EXPORT_SYMBOL(get_rbnand_block_size); -+ -+int __init rbmips_init(void) -+{ -+ int *b; -+ memset(&rmtd, 0, sizeof(rmtd)); -+ memset(&rnand, 0, sizeof(rnand)); -+ -+ printk("RB500 nand\n"); -+ changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, -+ LO_ULED | LO_ALE | LO_CLE); -+ rnand.cmd_ctrl = rbmips_hwcontrol500; -+ -+ rnand.dev_ready = rb500_dev_ready; -+ rnand.IO_ADDR_W = (unsigned char *) -+ KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE)); -+ rnand.IO_ADDR_R = rnand.IO_ADDR_W; -+ -+ p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000); -+ if (!p_nand) { -+ printk("RBnand Unable ioremap buffer"); -+ return -ENXIO; -+ } -+ rnand.ecc.mode = NAND_ECC_SOFT; -+ rnand.chip_delay = 25; -+ rnand.options |= NAND_NO_AUTOINCR; -+ rmtd.priv = &rnand; -+ -+ b = (int *) KSEG1ADDR(0x18010020); -+ printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0], -+ b[1], b[2], b[3]); -+ -+ if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) -+ && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) { -+ printk("RBxxx nand device not found\n"); -+ iounmap((void *) p_nand); -+ return -ENXIO; -+ } -+ -+ add_mtd_partitions(&rmtd, partition_info, 2); -+ init_ok = 1; -+ return 0; -+} -+ -+module_init(rbmips_init); + -- 2.30.2