From afd48ef2c81c3cff31d33bb10a1295a93a5e76cd Mon Sep 17 00:00:00 2001 From: Claudio Mignanti Date: Wed, 4 Feb 2009 18:00:13 +0000 Subject: [PATCH] [etrax] Update usb host driver as in Axis SDK2.20 SVN-Revision: 14409 --- .../etrax/files/drivers/usb/host/hc-crisv10.c | 4985 +++++++++++++++ .../usb/host/{hc_crisv10.h => hc-crisv10.h} | 278 +- .../etrax/files/drivers/usb/host/hc_crisv10.c | 4550 -------------- .../patches-2.6.25/301-usb_support.patch | 5322 +---------------- 4 files changed, 5173 insertions(+), 9962 deletions(-) create mode 100644 target/linux/etrax/files/drivers/usb/host/hc-crisv10.c rename target/linux/etrax/files/drivers/usb/host/{hc_crisv10.h => hc-crisv10.h} (50%) delete mode 100644 target/linux/etrax/files/drivers/usb/host/hc_crisv10.c diff --git a/target/linux/etrax/files/drivers/usb/host/hc-crisv10.c b/target/linux/etrax/files/drivers/usb/host/hc-crisv10.c new file mode 100644 index 0000000000..28d9fae612 --- /dev/null +++ b/target/linux/etrax/files/drivers/usb/host/hc-crisv10.c @@ -0,0 +1,4985 @@ +/* + * + * ETRAX 100LX USB Host Controller Driver + * + * Copyright (C) 2005 - 2008 Axis Communications AB + * + * Author: Konrad Eriksson + * + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "../core/hcd.h" +#include "../core/hub.h" +#include "hc-crisv10.h" +#include "hc-cris-dbg.h" + + +/***************************************************************************/ +/***************************************************************************/ +/* Host Controller settings */ +/***************************************************************************/ +/***************************************************************************/ + +#define VERSION "1.00-openwrt_diff" +#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB" +#define DESCRIPTION "ETRAX 100LX USB Host Controller" + +#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR +#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR +#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR + +/* Number of physical ports in Etrax 100LX */ +#define USB_ROOT_HUB_PORTS 2 + +const char hc_name[] = "hc-crisv10"; +const char product_desc[] = DESCRIPTION; + +/* The number of epids is, among other things, used for pre-allocating + ctrl, bulk and isoc EP descriptors (one for each epid). + Assumed to be > 1 when initiating the DMA lists. */ +#define NBR_OF_EPIDS 32 + +/* Support interrupt traffic intervals up to 128 ms. */ +#define MAX_INTR_INTERVAL 128 + +/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP + table must be "invalid". By this we mean that we shouldn't care about epid + attentions for this epid, or at least handle them differently from epid + attentions for "valid" epids. This define determines which one to use + (don't change it). */ +#define INVALID_EPID 31 +/* A special epid for the bulk dummys. */ +#define DUMMY_EPID 30 + +/* Module settings */ + +MODULE_DESCRIPTION(DESCRIPTION); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Konrad Eriksson "); + + +/* Module parameters */ + +/* 0 = No ports enabled + 1 = Only port 1 enabled (on board ethernet on devboard) + 2 = Only port 2 enabled (external connector on devboard) + 3 = Both ports enabled +*/ +static unsigned int ports = 3; +module_param(ports, uint, S_IRUGO); +MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use"); + + +/***************************************************************************/ +/***************************************************************************/ +/* Shared global variables for this module */ +/***************************************************************************/ +/***************************************************************************/ + +/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */ +static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); + +static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); + +/* EP descriptor lists for period transfers. Must be 32-bit aligned. */ +static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); +static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4))); + +static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); +static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4))); + +static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); + +/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set, + causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which + gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the + EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors + in each frame. */ +static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); + +/* List of URB pointers, where each points to the active URB for a epid. + For Bulk, Ctrl and Intr this means which URB that currently is added to + DMA lists (Isoc URBs are all directly added to DMA lists). As soon as + URB has completed is the queue examined and the first URB in queue is + removed and moved to the activeUrbList while its state change to STARTED and + its transfer(s) gets added to DMA list (exception Isoc where URBs enter + state STARTED directly and added transfers added to DMA lists). */ +static struct urb *activeUrbList[NBR_OF_EPIDS]; + +/* Additional software state info for each epid */ +static struct etrax_epid epid_state[NBR_OF_EPIDS]; + +/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops + even if there is new data waiting to be processed */ +static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); +static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); + +/* We want the start timer to expire before the eot timer, because the former + might start traffic, thus making it unnecessary for the latter to time + out. */ +#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */ +#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */ + +/* Delay before a URB completion happen when it's scheduled to be delayed */ +#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */ + +/* Simplifying macros for checking software state info of a epid */ +/* ----------------------------------------------------------------------- */ +#define epid_inuse(epid) epid_state[epid].inuse +#define epid_out_traffic(epid) epid_state[epid].out_traffic +#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0) +#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0) + + +/***************************************************************************/ +/***************************************************************************/ +/* DEBUG FUNCTIONS */ +/***************************************************************************/ +/***************************************************************************/ +/* Note that these functions are always available in their "__" variants, + for use in error situations. The "__" missing variants are controlled by + the USB_DEBUG_DESC/USB_DEBUG_URB macros. */ +static void __dump_urb(struct urb* purb) +{ + struct crisv10_urb_priv *urb_priv = purb->hcpriv; + int urb_num = -1; + if(urb_priv) { + urb_num = urb_priv->urb_num; + } + printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num); + printk("dev :0x%08lx\n", (unsigned long)purb->dev); + printk("pipe :0x%08x\n", purb->pipe); + printk("status :%d\n", purb->status); + printk("transfer_flags :0x%08x\n", purb->transfer_flags); + printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); + printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); + printk("actual_length :%d\n", purb->actual_length); + printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); + printk("start_frame :%d\n", purb->start_frame); + printk("number_of_packets :%d\n", purb->number_of_packets); + printk("interval :%d\n", purb->interval); + printk("error_count :%d\n", purb->error_count); + printk("context :0x%08lx\n", (unsigned long)purb->context); + printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); +} + +static void __dump_in_desc(volatile struct USB_IN_Desc *in) +{ + printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); + printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); + printk(" command : 0x%04x\n", in->command); + printk(" next : 0x%08lx\n", in->next); + printk(" buf : 0x%08lx\n", in->buf); + printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); + printk(" status : 0x%04x\n\n", in->status); +} + +static void __dump_sb_desc(volatile struct USB_SB_Desc *sb) +{ + char tt = (sb->command & 0x30) >> 4; + char *tt_string; + + switch (tt) { + case 0: + tt_string = "zout"; + break; + case 1: + tt_string = "in"; + break; + case 2: + tt_string = "out"; + break; + case 3: + tt_string = "setup"; + break; + default: + tt_string = "unknown (weird)"; + } + + printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb); + printk(" command:0x%04x (", sb->command); + printk("rem:%d ", (sb->command & 0x3f00) >> 8); + printk("full:%d ", (sb->command & 0x40) >> 6); + printk("tt:%d(%s) ", tt, tt_string); + printk("intr:%d ", (sb->command & 0x8) >> 3); + printk("eot:%d ", (sb->command & 0x2) >> 1); + printk("eol:%d)", sb->command & 0x1); + printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len); + printk(" next:0x%08lx", sb->next); + printk(" buf:0x%08lx\n", sb->buf); +} + + +static void __dump_ep_desc(volatile struct USB_EP_Desc *ep) +{ + printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep); + printk(" command:0x%04x (", ep->command); + printk("ep_id:%d ", (ep->command & 0x1f00) >> 8); + printk("enable:%d ", (ep->command & 0x10) >> 4); + printk("intr:%d ", (ep->command & 0x8) >> 3); + printk("eof:%d ", (ep->command & 0x2) >> 1); + printk("eol:%d)", ep->command & 0x1); + printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len); + printk(" next:0x%08lx", ep->next); + printk(" sub:0x%08lx\n", ep->sub); +} + +static inline void __dump_ep_list(int pipe_type) +{ + volatile struct USB_EP_Desc *ep; + volatile struct USB_EP_Desc *first_ep; + volatile struct USB_SB_Desc *sb; + + switch (pipe_type) + { + case PIPE_BULK: + first_ep = &TxBulkEPList[0]; + break; + case PIPE_CONTROL: + first_ep = &TxCtrlEPList[0]; + break; + case PIPE_INTERRUPT: + first_ep = &TxIntrEPList[0]; + break; + case PIPE_ISOCHRONOUS: + first_ep = &TxIsocEPList[0]; + break; + default: + warn("Cannot dump unknown traffic type"); + return; + } + ep = first_ep; + + printk("\n\nDumping EP list...\n\n"); + + do { + __dump_ep_desc(ep); + /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ + sb = ep->sub ? phys_to_virt(ep->sub) : 0; + while (sb) { + __dump_sb_desc(sb); + sb = sb->next ? phys_to_virt(sb->next) : 0; + } + ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next)); + + } while (ep != first_ep); +} + +static inline void __dump_ept_data(int epid) +{ + unsigned long flags; + __u32 r_usb_ept_data; + + if (epid < 0 || epid > 31) { + printk("Cannot dump ept data for invalid epid %d\n", epid); + return; + } + + local_irq_save(flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); + nop(); + r_usb_ept_data = *R_USB_EPT_DATA; + local_irq_restore(flags); + + printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); + if (r_usb_ept_data == 0) { + /* No need for more detailed printing. */ + return; + } + printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); + printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); + printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); + printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); + printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); + printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); + printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); + printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); + printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); + printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); + printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); + printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); +} + +static inline void __dump_ept_data_iso(int epid) +{ + unsigned long flags; + __u32 ept_data; + + if (epid < 0 || epid > 31) { + printk("Cannot dump ept data for invalid epid %d\n", epid); + return; + } + + local_irq_save(flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); + nop(); + ept_data = *R_USB_EPT_DATA_ISO; + local_irq_restore(flags); + + printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid); + if (ept_data == 0) { + /* No need for more detailed printing. */ + return; + } + printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid, + ept_data)); + printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port, + ept_data)); + printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, + ept_data)); + printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, + ept_data)); + printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, + ept_data)); + printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, + ept_data)); +} + +static inline void __dump_ept_data_list(void) +{ + int i; + + printk("Dumping the whole R_USB_EPT_DATA list\n"); + + for (i = 0; i < 32; i++) { + __dump_ept_data(i); + } +} + +static void debug_epid(int epid) { + int i; + + if(epid_isoc(epid)) { + __dump_ept_data_iso(epid); + } else { + __dump_ept_data(epid); + } + + printk("Bulk:\n"); + for(i = 0; i < 32; i++) { + if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) == + epid) { + printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i])); + } + } + + printk("Ctrl:\n"); + for(i = 0; i < 32; i++) { + if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) == + epid) { + printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i])); + } + } + + printk("Intr:\n"); + for(i = 0; i < MAX_INTR_INTERVAL; i++) { + if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) == + epid) { + printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i])); + } + } + + printk("Isoc:\n"); + for(i = 0; i < 32; i++) { + if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) == + epid) { + printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i])); + } + } + + __dump_ept_data_list(); + __dump_ep_list(PIPE_INTERRUPT); + printk("\n\n"); +} + + + +char* hcd_status_to_str(__u8 bUsbStatus) { + static char hcd_status_str[128]; + hcd_status_str[0] = '\0'; + if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) { + strcat(hcd_status_str, "ourun "); + } + if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) { + strcat(hcd_status_str, "perror "); + } + if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) { + strcat(hcd_status_str, "device_mode "); + } + if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) { + strcat(hcd_status_str, "host_mode "); + } + if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) { + strcat(hcd_status_str, "started "); + } + if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) { + strcat(hcd_status_str, "running "); + } + return hcd_status_str; +} + + +char* sblist_to_str(struct USB_SB_Desc* sb_desc) { + static char sblist_to_str_buff[128]; + char tmp[32], tmp2[32]; + sblist_to_str_buff[0] = '\0'; + while(sb_desc != NULL) { + switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) { + case 0: sprintf(tmp, "zout"); break; + case 1: sprintf(tmp, "in"); break; + case 2: sprintf(tmp, "out"); break; + case 3: sprintf(tmp, "setup"); break; + } + sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len); + strcat(sblist_to_str_buff, tmp2); + if(sb_desc->next != 0) { + sb_desc = phys_to_virt(sb_desc->next); + } else { + sb_desc = NULL; + } + } + return sblist_to_str_buff; +} + +char* port_status_to_str(__u16 wPortStatus) { + static char port_status_str[128]; + port_status_str[0] = '\0'; + if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) { + strcat(port_status_str, "connected "); + } + if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) { + strcat(port_status_str, "enabled "); + } + if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) { + strcat(port_status_str, "suspended "); + } + if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) { + strcat(port_status_str, "reset "); + } + if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) { + strcat(port_status_str, "full-speed "); + } else { + strcat(port_status_str, "low-speed "); + } + return port_status_str; +} + + +char* endpoint_to_str(struct usb_endpoint_descriptor *ed) { + static char endpoint_to_str_buff[128]; + char tmp[32]; + int epnum = ed->bEndpointAddress & 0x0F; + int dir = ed->bEndpointAddress & 0x80; + int type = ed->bmAttributes & 0x03; + endpoint_to_str_buff[0] = '\0'; + sprintf(endpoint_to_str_buff, "ep:%d ", epnum); + switch(type) { + case 0: + sprintf(tmp, " ctrl"); + break; + case 1: + sprintf(tmp, " isoc"); + break; + case 2: + sprintf(tmp, " bulk"); + break; + case 3: + sprintf(tmp, " intr"); + break; + } + strcat(endpoint_to_str_buff, tmp); + if(dir) { + sprintf(tmp, " in"); + } else { + sprintf(tmp, " out"); + } + strcat(endpoint_to_str_buff, tmp); + + return endpoint_to_str_buff; +} + +/* Debug helper functions for Transfer Controller */ +char* pipe_to_str(unsigned int pipe) { + static char pipe_to_str_buff[128]; + char tmp[64]; + sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe)); + sprintf(tmp, " type:%s", str_type(pipe)); + strcat(pipe_to_str_buff, tmp); + + sprintf(tmp, " dev:%d", usb_pipedevice(pipe)); + strcat(pipe_to_str_buff, tmp); + sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe)); + strcat(pipe_to_str_buff, tmp); + return pipe_to_str_buff; +} + + +#define USB_DEBUG_DESC 1 + +#ifdef USB_DEBUG_DESC +#define dump_in_desc(x) __dump_in_desc(x) +#define dump_sb_desc(...) __dump_sb_desc(...) +#define dump_ep_desc(x) __dump_ep_desc(x) +#define dump_ept_data(x) __dump_ept_data(x) +#else +#define dump_in_desc(...) do {} while (0) +#define dump_sb_desc(...) do {} while (0) +#define dump_ep_desc(...) do {} while (0) +#endif + + +/* Uncomment this to enable massive function call trace + #define USB_DEBUG_TRACE */ + +#ifdef USB_DEBUG_TRACE +#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) +#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) +#else +#define DBFENTER do {} while (0) +#define DBFEXIT do {} while (0) +#endif + +#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ +{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} + +/* Most helpful debugging aid */ +#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__)))) + + +/***************************************************************************/ +/***************************************************************************/ +/* Forward declarations */ +/***************************************************************************/ +/***************************************************************************/ +void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg); +void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg); +void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg); +void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg); + +void rh_port_status_change(__u16[]); +int rh_clear_port_feature(__u8, __u16); +int rh_set_port_feature(__u8, __u16); +static void rh_disable_port(unsigned int port); + +static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, + int timer); + +static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, + int mem_flags); +static void tc_free_epid(struct usb_host_endpoint *ep); +static int tc_allocate_epid(void); +static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status); +static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, + int status); + +static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, + int mem_flags); +static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb); + +static int crisv10_usb_check_bandwidth(struct usb_device *dev,struct urb *urb); +static void crisv10_usb_claim_bandwidth( + struct usb_device *dev, struct urb *urb, int bustime, int isoc); +static void crisv10_usb_release_bandwidth( + struct usb_hcd *hcd, int isoc, int bandwidth); + +static inline struct urb *urb_list_first(int epid); +static inline void urb_list_add(struct urb *urb, int epid, + int mem_flags); +static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid); +static inline void urb_list_del(struct urb *urb, int epid); +static inline void urb_list_move_last(struct urb *urb, int epid); +static inline struct urb *urb_list_next(struct urb *urb, int epid); + +int create_sb_for_urb(struct urb *urb, int mem_flags); +int init_intr_urb(struct urb *urb, int mem_flags); + +static inline void etrax_epid_set(__u8 index, __u32 data); +static inline void etrax_epid_clear_error(__u8 index); +static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, + __u8 toggle); +static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout); +static inline __u32 etrax_epid_get(__u8 index); + +/* We're accessing the same register position in Etrax so + when we do full access the internal difference doesn't matter */ +#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data) +#define etrax_epid_iso_get(index) etrax_epid_get(index) + + +static void tc_dma_process_isoc_urb(struct urb *urb); +static void tc_dma_process_queue(int epid); +static void tc_dma_unlink_intr_urb(struct urb *urb); +static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc); +static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc); + +static void tc_bulk_start_timer_func(unsigned long dummy); +static void tc_bulk_eot_timer_func(unsigned long dummy); + + +/*************************************************************/ +/*************************************************************/ +/* Host Controler Driver block */ +/*************************************************************/ +/*************************************************************/ + +/* HCD operations */ +static irqreturn_t crisv10_hcd_top_irq(int irq, void*); +static int crisv10_hcd_reset(struct usb_hcd *); +static int crisv10_hcd_start(struct usb_hcd *); +static void crisv10_hcd_stop(struct usb_hcd *); +#ifdef CONFIG_PM +static int crisv10_hcd_suspend(struct device *, u32, u32); +static int crisv10_hcd_resume(struct device *, u32); +#endif /* CONFIG_PM */ +static int crisv10_hcd_get_frame(struct usb_hcd *); + +static int tc_urb_enqueue(struct usb_hcd *, struct urb *, gfp_t mem_flags); +static int tc_urb_dequeue(struct usb_hcd *, struct urb *, int); +static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep); + +static int rh_status_data_request(struct usb_hcd *, char *); +static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16); + +#ifdef CONFIG_PM +static int crisv10_hcd_hub_suspend(struct usb_hcd *); +static int crisv10_hcd_hub_resume(struct usb_hcd *); +#endif /* CONFIG_PM */ +#ifdef CONFIG_USB_OTG +static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned); +#endif /* CONFIG_USB_OTG */ + +/* host controller driver interface */ +static const struct hc_driver crisv10_hc_driver = + { + .description = hc_name, + .product_desc = product_desc, + .hcd_priv_size = sizeof(struct crisv10_hcd), + + /* Attaching IRQ handler manualy in probe() */ + /* .irq = crisv10_hcd_irq, */ + + .flags = HCD_USB11, + + /* called to init HCD and root hub */ + .reset = crisv10_hcd_reset, + .start = crisv10_hcd_start, + + /* cleanly make HCD stop writing memory and doing I/O */ + .stop = crisv10_hcd_stop, + + /* return current frame number */ + .get_frame_number = crisv10_hcd_get_frame, + + + /* Manage i/o requests via the Transfer Controller */ + .urb_enqueue = tc_urb_enqueue, + .urb_dequeue = tc_urb_dequeue, + + /* hw synch, freeing endpoint resources that urb_dequeue can't */ + .endpoint_disable = tc_endpoint_disable, + + + /* Root Hub support */ + .hub_status_data = rh_status_data_request, + .hub_control = rh_control_request, +#ifdef CONFIG_PM + .hub_suspend = rh_suspend_request, + .hub_resume = rh_resume_request, +#endif /* CONFIG_PM */ +#ifdef CONFIG_USB_OTG + .start_port_reset = crisv10_hcd_start_port_reset, +#endif /* CONFIG_USB_OTG */ + }; + + +/* + * conversion between pointers to a hcd and the corresponding + * crisv10_hcd + */ + +static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd) +{ + return (struct crisv10_hcd *) hcd->hcd_priv; +} + +static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd) +{ + return container_of((void *) hcd, struct usb_hcd, hcd_priv); +} + +/* check if specified port is in use */ +static inline int port_in_use(unsigned int port) +{ + return ports & (1 << port); +} + +/* number of ports in use */ +static inline unsigned int num_ports(void) +{ + unsigned int i, num = 0; + for (i = 0; i < USB_ROOT_HUB_PORTS; i++) + if (port_in_use(i)) + num++; + return num; +} + +/* map hub port number to the port number used internally by the HC */ +static inline unsigned int map_port(unsigned int port) +{ + unsigned int i, num = 0; + for (i = 0; i < USB_ROOT_HUB_PORTS; i++) + if (port_in_use(i)) + if (++num == port) + return i; + return -1; +} + +/* size of descriptors in slab cache */ +#ifndef MAX +#define MAX(x, y) ((x) > (y) ? (x) : (y)) +#endif + + +/******************************************************************/ +/* Hardware Interrupt functions */ +/******************************************************************/ + +/* Fast interrupt handler for HC */ +static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd) +{ + struct usb_hcd *hcd = vcd; + struct crisv10_irq_reg reg; + __u32 irq_mask; + unsigned long flags; + + DBFENTER; + + ASSERT(hcd != NULL); + reg.hcd = hcd; + + /* Turn of other interrupts while handling these sensitive cases */ + local_irq_save(flags); + + /* Read out which interrupts that are flaged */ + irq_mask = *R_USB_IRQ_MASK_READ; + reg.r_usb_irq_mask_read = irq_mask; + + /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that + R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter + clears the ourun and perror fields of R_USB_STATUS. */ + reg.r_usb_status = *R_USB_STATUS; + + /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn + interrupts. */ + reg.r_usb_epid_attn = *R_USB_EPID_ATTN; + + /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the + port_status interrupt. */ + reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1; + reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2; + + /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ + /* Note: the lower 11 bits contain the actual frame number, sent with each + sof. */ + reg.r_usb_fm_number = *R_USB_FM_NUMBER; + + /* Interrupts are handled in order of priority. */ + if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { + crisv10_hcd_port_status_irq(®); + } + if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { + crisv10_hcd_epid_attn_irq(®); + } + if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { + crisv10_hcd_ctl_status_irq(®); + } + if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { + crisv10_hcd_isoc_eof_irq(®); + } + if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { + /* Update/restart the bulk start timer since obviously the channel is + running. */ + mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); + /* Update/restart the bulk eot timer since we just received an bulk eot + interrupt. */ + mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); + + /* Check for finished bulk transfers on epids */ + check_finished_bulk_tx_epids(hcd, 0); + } + local_irq_restore(flags); + + DBFEXIT; + return IRQ_HANDLED; +} + + +void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) { + struct usb_hcd *hcd = reg->hcd; + struct crisv10_urb_priv *urb_priv; + int epid; + DBFENTER; + + for (epid = 0; epid < NBR_OF_EPIDS; epid++) { + if (test_bit(epid, (void *)®->r_usb_epid_attn)) { + struct urb *urb; + __u32 ept_data; + int error_code; + + if (epid == DUMMY_EPID || epid == INVALID_EPID) { + /* We definitely don't care about these ones. Besides, they are + always disabled, so any possible disabling caused by the + epid attention interrupt is irrelevant. */ + warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid); + continue; + } + + if(!epid_inuse(epid)) { + irq_err("Epid attention on epid:%d that isn't in use\n", epid); + printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); + debug_epid(epid); + continue; + } + + /* Note that although there are separate R_USB_EPT_DATA and + R_USB_EPT_DATA_ISO registers, they are located at the same address and + are of the same size. In other words, this read should be ok for isoc + also. */ + ept_data = etrax_epid_get(epid); + error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data); + + /* Get the active URB for this epid. We blatantly assume + that only this URB could have caused the epid attention. */ + urb = activeUrbList[epid]; + if (urb == NULL) { + irq_err("Attention on epid:%d error:%d with no active URB.\n", + epid, error_code); + printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); + debug_epid(epid); + continue; + } + + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + + /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ + if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { + + /* Isoc traffic doesn't have error_count_in/error_count_out. */ + if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && + (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 || + IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) { + /* Check if URB allready is marked for late-finish, we can get + several 3rd error for Intr traffic when a device is unplugged */ + if(urb_priv->later_data == NULL) { + /* 3rd error. */ + irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid, + str_dir(urb->pipe), str_type(urb->pipe), + (unsigned int)urb, urb_priv->urb_num); + + tc_finish_urb_later(hcd, urb, -EPROTO); + } + + } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { + irq_warn("Perror for epid:%d\n", epid); + printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); + printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); + __dump_urb(urb); + debug_epid(epid); + + if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { + /* invalid ep_id */ + panic("Perror because of invalid epid." + " Deconfigured too early?"); + } else { + /* past eof1, near eof, zout transfer, setup transfer */ + /* Dump the urb and the relevant EP descriptor. */ + panic("Something wrong with DMA descriptor contents." + " Too much traffic inserted?"); + } + } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { + /* buffer ourun */ + printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); + printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); + __dump_urb(urb); + debug_epid(epid); + + panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid); + } else { + irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid, + str_dir(urb->pipe), str_type(urb->pipe)); + printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); + __dump_urb(urb); + debug_epid(epid); + } + + } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, + stall)) { + /* Not really a protocol error, just says that the endpoint gave + a stall response. Note that error_code cannot be stall for isoc. */ + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + panic("Isoc traffic cannot stall"); + } + + tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid, + str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb); + tc_finish_urb(hcd, urb, -EPIPE); + + } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, + bus_error)) { + /* Two devices responded to a transaction request. Must be resolved + by software. FIXME: Reset ports? */ + panic("Bus error for epid %d." + " Two devices responded to transaction request\n", + epid); + + } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, + buffer_error)) { + /* DMA overrun or underrun. */ + irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid, + str_dir(urb->pipe), str_type(urb->pipe)); + + /* It seems that error_code = buffer_error in + R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS + are the same error. */ + tc_finish_urb(hcd, urb, -EPROTO); + } else { + irq_warn("Unknown attention on epid:%d (%s %s)\n", epid, + str_dir(urb->pipe), str_type(urb->pipe)); + dump_ept_data(epid); + } + } + } + DBFEXIT; +} + +void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg) +{ + __u16 port_reg[USB_ROOT_HUB_PORTS]; + DBFENTER; + port_reg[0] = reg->r_usb_rh_port_status_1; + port_reg[1] = reg->r_usb_rh_port_status_2; + rh_port_status_change(port_reg); + DBFEXIT; +} + +void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg) +{ + int epid; + struct urb *urb; + struct crisv10_urb_priv *urb_priv; + + DBFENTER; + + for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { + + /* Only check epids that are in use, is valid and has SB list */ + if (!epid_inuse(epid) || epid == INVALID_EPID || + TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) { + /* Nothing here to see. */ + continue; + } + ASSERT(epid_isoc(epid)); + + /* Get the active URB for this epid (if any). */ + urb = activeUrbList[epid]; + if (urb == 0) { + isoc_warn("Ignoring NULL urb for epid:%d\n", epid); + continue; + } + if(!epid_out_traffic(epid)) { + /* Sanity check. */ + ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); + + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + + if (urb_priv->urb_state == NOT_STARTED) { + /* If ASAP is not set and urb->start_frame is the current frame, + start the transfer. */ + if (!(urb->transfer_flags & URB_ISO_ASAP) && + (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { + /* EP should not be enabled if we're waiting for start_frame */ + ASSERT((TxIsocEPList[epid].command & + IO_STATE(USB_EP_command, enable, yes)) == 0); + + isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid); + TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); + + /* This urb is now active. */ + urb_priv->urb_state = STARTED; + continue; + } + } + } + } + + DBFEXIT; +} + +void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg) +{ + struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd); + + DBFENTER; + ASSERT(crisv10_hcd); + + irq_dbg("ctr_status_irq, controller status: %s\n", + hcd_status_to_str(reg->r_usb_status)); + + /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB + list for the corresponding epid? */ + if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { + panic("USB controller got ourun."); + } + if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { + + /* Before, etrax_usb_do_intr_recover was called on this epid if it was + an interrupt pipe. I don't see how re-enabling all EP descriptors + will help if there was a programming error. */ + panic("USB controller got perror."); + } + + /* Keep track of USB Controller, if it's running or not */ + if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) { + crisv10_hcd->running = 1; + } else { + crisv10_hcd->running = 0; + } + + if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { + /* We should never operate in device mode. */ + panic("USB controller in device mode."); + } + + /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably + using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */ + set_bit(HCD_FLAG_SAW_IRQ, ®->hcd->flags); + + DBFEXIT; +} + + +/******************************************************************/ +/* Host Controller interface functions */ +/******************************************************************/ + +static inline void crisv10_ready_wait(void) { + volatile int timeout = 10000; + /* Check the busy bit of USB controller in Etrax */ + while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for USB controller to be idle\n"); + } +} + +/* reset host controller */ +static int crisv10_hcd_reset(struct usb_hcd *hcd) +{ + DBFENTER; + hcd_dbg(hcd, "reset\n"); + + + /* Reset the USB interface. */ + /* + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); + nop(); + */ + DBFEXIT; + return 0; +} + +/* start host controller */ +static int crisv10_hcd_start(struct usb_hcd *hcd) +{ + DBFENTER; + hcd_dbg(hcd, "start\n"); + + crisv10_ready_wait(); + + /* Start processing of USB traffic. */ + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); + + nop(); + + hcd->state = HC_STATE_RUNNING; + + DBFEXIT; + return 0; +} + +/* stop host controller */ +static void crisv10_hcd_stop(struct usb_hcd *hcd) +{ + DBFENTER; + hcd_dbg(hcd, "stop\n"); + crisv10_hcd_reset(hcd); + DBFEXIT; +} + +/* return the current frame number */ +static int crisv10_hcd_get_frame(struct usb_hcd *hcd) +{ + DBFENTER; + DBFEXIT; + return (*R_USB_FM_NUMBER & 0x7ff); +} + +#ifdef CONFIG_USB_OTG + +static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port) +{ + return 0; /* no-op for now */ +} + +#endif /* CONFIG_USB_OTG */ + + +/******************************************************************/ +/* Root Hub functions */ +/******************************************************************/ + +/* root hub status */ +static const struct usb_hub_status rh_hub_status = + { + .wHubStatus = 0, + .wHubChange = 0, + }; + +/* root hub descriptor */ +static const u8 rh_hub_descr[] = + { + 0x09, /* bDescLength */ + 0x29, /* bDescriptorType */ + USB_ROOT_HUB_PORTS, /* bNbrPorts */ + 0x00, /* wHubCharacteristics */ + 0x00, + 0x01, /* bPwrOn2pwrGood */ + 0x00, /* bHubContrCurrent */ + 0x00, /* DeviceRemovable */ + 0xff /* PortPwrCtrlMask */ + }; + +/* Actual holder of root hub status*/ +struct crisv10_rh rh; + +/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */ +int rh_init(void) { + int i; + /* Reset port status flags */ + for (i = 0; i < USB_ROOT_HUB_PORTS; i++) { + rh.wPortChange[i] = 0; + rh.wPortStatusPrev[i] = 0; + } + return 0; +} + +#define RH_FEAT_MASK ((1<lock); + for (i = 1; i <= crisv10_hcd->num_ports; i++) { + if (rh.wPortChange[map_port(i)]) { + *buf |= (1 << i); + rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i, + port_status_to_str(rh.wPortChange[map_port(i)]), + port_status_to_str(rh.wPortStatusPrev[map_port(i)])); + } + } + spin_unlock(&crisv10_hcd->lock); + DBFEXIT; + return *buf == 0 ? 0 : 1; +} + +/* Handle a control request for the root hub (called from hcd_driver) */ +static int rh_control_request(struct usb_hcd *hcd, + u16 typeReq, + u16 wValue, + u16 wIndex, + char *buf, + u16 wLength) { + + struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd); + int retval = 0; + int len; + DBFENTER; + + switch (typeReq) { + case GetHubDescriptor: + rh_dbg("GetHubDescriptor\n"); + len = min_t(unsigned int, sizeof rh_hub_descr, wLength); + memcpy(buf, rh_hub_descr, len); + buf[2] = crisv10_hcd->num_ports; + break; + case GetHubStatus: + rh_dbg("GetHubStatus\n"); + len = min_t(unsigned int, sizeof rh_hub_status, wLength); + memcpy(buf, &rh_hub_status, len); + break; + case GetPortStatus: + if (!wIndex || wIndex > crisv10_hcd->num_ports) + goto error; + rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex, + port_status_to_str(rh.wPortChange[map_port(wIndex)]), + port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)])); + *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]); + *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]); + break; + case SetHubFeature: + rh_dbg("SetHubFeature\n"); + case ClearHubFeature: + rh_dbg("ClearHubFeature\n"); + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + rh_warn("Not implemented hub request:%d \n", typeReq); + /* not implemented */ + break; + default: + goto error; + } + break; + case SetPortFeature: + if (!wIndex || wIndex > crisv10_hcd->num_ports) + goto error; + if(rh_set_port_feature(map_port(wIndex), wValue)) + goto error; + break; + case ClearPortFeature: + if (!wIndex || wIndex > crisv10_hcd->num_ports) + goto error; + if(rh_clear_port_feature(map_port(wIndex), wValue)) + goto error; + break; + default: + rh_warn("Unknown hub request: %d\n", typeReq); + error: + retval = -EPIPE; + } + DBFEXIT; + return retval; +} + +int rh_set_port_feature(__u8 bPort, __u16 wFeature) { + __u8 bUsbCommand = 0; + __u8 reset_cnt; + switch(wFeature) { + case USB_PORT_FEAT_RESET: + rh_dbg("SetPortFeature: reset\n"); + + if (rh.wPortStatusPrev[bPort] & + IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) + { + __u8 restart_controller = 0; + + if ( (rh.wPortStatusPrev[0] & + IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && + (rh.wPortStatusPrev[1] & + IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes)) ) + { + /* Both ports is enabled. The USB controller will not change state. */ + restart_controller = 0; + } + else + { + /* Only ports is enabled. The USB controller will change state and + must be restarted. */ + restart_controller = 1; + } + /* + In ETRAX 100LX it's not possible to reset an enabled root hub port. + The workaround is to disable and enable the port before resetting it. + Disabling the port can, if both ports are disabled at once, cause the + USB controller to change state to HOST_MODE state. + The USB controller state transition causes a lot of unwanted + interrupts that must be avoided. + Disabling the USB controller status and port status interrupts before + disabling/resetting the port stops these interrupts. + + These actions are performed: + 1. Disable USB controller status and port status interrupts. + 2. Disable the port + 3. Wait for the port to be disabled. + 4. Enable the port. + 5. Wait for the port to be enabled. + 6. Reset the port. + 7. Wait for for the reset to end. + 8. Wait for the USB controller entering started state. + 9. Order the USB controller to running state. + 10. Wait for the USB controller reaching running state. + 11. Clear all interrupts generated during the disable/enable/reset + procedure. + 12. Enable the USB controller status and port status interrupts. + */ + + /* 1. Disable USB controller status and USB port status interrupts. */ + *R_USB_IRQ_MASK_CLR = IO_STATE(R_USB_IRQ_MASK_CLR, ctl_status, clr); + __asm__ __volatile__ (" nop"); + *R_USB_IRQ_MASK_CLR = IO_STATE(R_USB_IRQ_MASK_CLR, port_status, clr); + __asm__ __volatile__ (" nop"); + + { + + /* Since an root hub port reset shall be 50 ms and the ETRAX 100LX + root hub port reset is 10 ms we must perform 5 port resets to + achieve a proper root hub port reset. */ + for (reset_cnt = 0; reset_cnt < 5; reset_cnt ++) + { + rh_dbg("Disable Port %d\n", bPort + 1); + + /* 2. Disable the port*/ + if (bPort == 0) + { + *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); + } + else + { + *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); + } + + /* 3. Wait for the port to be disabled. */ + while ( (bPort == 0) ? + *R_USB_RH_PORT_STATUS_1 & + IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes) : + *R_USB_RH_PORT_STATUS_2 & + IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes) ) {} + + rh_dbg("Port %d is disabled. Enable it!\n", bPort + 1); + + /* 4. Enable the port. */ + if (bPort == 0) + { + *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); + } + else + { + *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); + } + + /* 5. Wait for the port to be enabled again. */ + while (!( (bPort == 0) ? + *R_USB_RH_PORT_STATUS_1 & + IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes) : + *R_USB_RH_PORT_STATUS_2 & + IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes) ) ) {} + + rh_dbg("Port %d is enabled.\n", bPort + 1); + + /* 6. Reset the port */ + crisv10_ready_wait(); + *R_USB_COMMAND = + ( (bPort == 0) ? + IO_STATE(R_USB_COMMAND, port_sel, port1): + IO_STATE(R_USB_COMMAND, port_sel, port2) ) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, busy, no) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); + rh_dbg("Port %d is resetting.\n", bPort + 1); + + /* 7. The USB specification says that we should wait for at least + 10ms for device recover */ + udelay(10500); /* 10,5ms blocking wait */ + + crisv10_ready_wait(); + } + } + + + /* Check if the USB controller needs to be restarted. */ + if (restart_controller) + { + /* 8. Wait for the USB controller entering started state. */ + while (!(*R_USB_STATUS & IO_STATE(R_USB_STATUS, started, yes))) {} + + /* 9. Order the USB controller to running state. */ + crisv10_ready_wait(); + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, busy, no) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); + + /* 10. Wait for the USB controller reaching running state. */ + while (!(*R_USB_STATUS & IO_STATE(R_USB_STATUS, running, yes))) {} + } + + /* 11. Clear any controller or port satus interrupts before enabling + the interrupts. */ + { + u16 dummy; + + /* Clear the port status interrupt of the reset port. */ + if (bPort == 0) + { + rh_dbg("Clearing port 1 interrupts\n"); + dummy = *R_USB_RH_PORT_STATUS_1; + } + else + { + rh_dbg("Clearing port 2 interrupts\n"); + dummy = *R_USB_RH_PORT_STATUS_2; + } + + if (restart_controller) + { + /* The USB controller is restarted. Clear all interupts. */ + rh_dbg("Clearing all interrupts\n"); + dummy = *R_USB_STATUS; + dummy = *R_USB_RH_PORT_STATUS_1; + dummy = *R_USB_RH_PORT_STATUS_2; + } + } + + /* 12. Enable USB controller status and USB port status interrupts. */ + *R_USB_IRQ_MASK_SET = IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); + __asm__ __volatile__ (" nop"); + *R_USB_IRQ_MASK_SET = IO_STATE(R_USB_IRQ_MASK_SET, port_status, set); + __asm__ __volatile__ (" nop"); + + } + else + { + + bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset); + /* Select which port via the port_sel field */ + bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); + + /* Make sure the controller isn't busy. */ + crisv10_ready_wait(); + /* Send out the actual command to the USB controller */ + *R_USB_COMMAND = bUsbCommand; + + /* Wait a while for controller to first become started after port reset */ + udelay(12000); /* 12ms blocking wait */ + + /* Make sure the controller isn't busy. */ + crisv10_ready_wait(); + + /* If all enabled ports were disabled the host controller goes down into + started mode, so we need to bring it back into the running state. + (This is safe even if it's already in the running state.) */ + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); + } + + break; + case USB_PORT_FEAT_SUSPEND: + rh_dbg("SetPortFeature: suspend\n"); + bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend); + goto set; + break; + case USB_PORT_FEAT_POWER: + rh_dbg("SetPortFeature: power\n"); + break; + case USB_PORT_FEAT_C_CONNECTION: + rh_dbg("SetPortFeature: c_connection\n"); + break; + case USB_PORT_FEAT_C_RESET: + rh_dbg("SetPortFeature: c_reset\n"); + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + rh_dbg("SetPortFeature: c_over_current\n"); + break; + + set: + /* Select which port via the port_sel field */ + bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); + + /* Make sure the controller isn't busy. */ + crisv10_ready_wait(); + /* Send out the actual command to the USB controller */ + *R_USB_COMMAND = bUsbCommand; + break; + default: + rh_dbg("SetPortFeature: unknown feature\n"); + return -1; + } + return 0; +} + +int rh_clear_port_feature(__u8 bPort, __u16 wFeature) { + switch(wFeature) { + case USB_PORT_FEAT_ENABLE: + rh_dbg("ClearPortFeature: enable\n"); + rh_disable_port(bPort); + break; + case USB_PORT_FEAT_SUSPEND: + rh_dbg("ClearPortFeature: suspend\n"); + break; + case USB_PORT_FEAT_POWER: + rh_dbg("ClearPortFeature: power\n"); + break; + + case USB_PORT_FEAT_C_ENABLE: + rh_dbg("ClearPortFeature: c_enable\n"); + goto clear; + case USB_PORT_FEAT_C_SUSPEND: + rh_dbg("ClearPortFeature: c_suspend\n"); + goto clear; + case USB_PORT_FEAT_C_CONNECTION: + rh_dbg("ClearPortFeature: c_connection\n"); + goto clear; + case USB_PORT_FEAT_C_OVER_CURRENT: + rh_dbg("ClearPortFeature: c_over_current\n"); + goto clear; + case USB_PORT_FEAT_C_RESET: + rh_dbg("ClearPortFeature: c_reset\n"); + goto clear; + clear: + rh.wPortChange[bPort] &= ~(1 << (wFeature - 16)); + break; + default: + rh_dbg("ClearPortFeature: unknown feature\n"); + return -1; + } + return 0; +} + + +#ifdef CONFIG_PM +/* Handle a suspend request for the root hub (called from hcd_driver) */ +static int rh_suspend_request(struct usb_hcd *hcd) +{ + return 0; /* no-op for now */ +} + +/* Handle a resume request for the root hub (called from hcd_driver) */ +static int rh_resume_request(struct usb_hcd *hcd) +{ + return 0; /* no-op for now */ +} +#endif /* CONFIG_PM */ + + + +/* Wrapper function for workaround port disable registers in USB controller */ +static void rh_disable_port(unsigned int port) { + volatile int timeout = 10000; + volatile char* usb_portx_disable; + switch(port) { + case 0: + usb_portx_disable = R_USB_PORT1_DISABLE; + break; + case 1: + usb_portx_disable = R_USB_PORT2_DISABLE; + break; + default: + /* Invalid port index */ + return; + } + /* Set disable flag in special register */ + *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); + /* Wait until not enabled anymore */ + while((rh.wPortStatusPrev[port] & + IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for port %d to become disabled\n", port); + } + /* clear disable flag in special register */ + *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no); + rh_info("Physical port %d disabled\n", port+1); +} + + +/******************************************************************/ +/* Transfer Controller (TC) functions */ +/******************************************************************/ + +/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it + dynamically? + To adjust it dynamically we would have to get an interrupt when we reach + the end of the rx descriptor list, or when we get close to the end, and + then allocate more descriptors. */ +#define NBR_OF_RX_DESC 512 +#define RX_DESC_BUF_SIZE 1024 +#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) + + +/* Local variables for Transfer Controller */ +/* --------------------------------------- */ + +/* This is a circular (double-linked) list of the active urbs for each epid. + The head is never removed, and new urbs are linked onto the list as + urb_entry_t elements. Don't reference urb_list directly; use the wrapper + functions instead (which includes spin_locks) */ +static struct list_head urb_list[NBR_OF_EPIDS]; + +/* Read about the need and usage of this lock in submit_ctrl_urb. */ +/* Lock for URB lists for each EPID */ +static spinlock_t urb_list_lock; + +/* Lock for EPID array register (R_USB_EPT_x) in Etrax */ +static spinlock_t etrax_epid_lock; + +/* Lock for dma8 sub0 handling */ +static spinlock_t etrax_dma8_sub0_lock; + +/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. + Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be + cache aligned. */ +static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); +static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); + +/* Pointers into RxDescList. */ +static volatile struct USB_IN_Desc *myNextRxDesc; +static volatile struct USB_IN_Desc *myLastRxDesc; + +/* A zout transfer makes a memory access at the address of its buf pointer, + which means that setting this buf pointer to 0 will cause an access to the + flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes + (depending on DMA burst size) transfer. + Instead, we set it to 1, and point it to this buffer. */ +static int zout_buffer[4] __attribute__ ((aligned (4))); + +/* Cache for allocating new EP and SB descriptors. */ +static struct kmem_cache *usb_desc_cache; + +/* Cache for the data allocated in the isoc descr top half. */ +static struct kmem_cache *isoc_compl_cache; + +/* Cache for the data allocated when delayed finishing of URBs */ +static struct kmem_cache *later_data_cache; + + +/* Counter to keep track of how many Isoc EP we have sat up. Used to enable + and disable iso_eof interrupt. We only need these interrupts when we have + Isoc data endpoints (consumes CPU cycles). + FIXME: This could be more fine granular, so this interrupt is only enabled + when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */ +static int isoc_epid_counter; + +/* Protecting wrapper functions for R_USB_EPT_x */ +/* -------------------------------------------- */ +static inline void etrax_epid_set(__u8 index, __u32 data) { + unsigned long flags; + spin_lock_irqsave(&etrax_epid_lock, flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); + nop(); + *R_USB_EPT_DATA = data; + spin_unlock_irqrestore(&etrax_epid_lock, flags); +} + +static inline void etrax_epid_clear_error(__u8 index) { + unsigned long flags; + spin_lock_irqsave(&etrax_epid_lock, flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); + nop(); + *R_USB_EPT_DATA &= + ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | + IO_MASK(R_USB_EPT_DATA, error_count_out) | + IO_MASK(R_USB_EPT_DATA, error_code)); + spin_unlock_irqrestore(&etrax_epid_lock, flags); +} + +static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, + __u8 toggle) { + unsigned long flags; + spin_lock_irqsave(&etrax_epid_lock, flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); + nop(); + if(dirout) { + *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); + *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); + } else { + *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); + *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); + } + spin_unlock_irqrestore(&etrax_epid_lock, flags); +} + +static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) { + unsigned long flags; + __u8 toggle; + spin_lock_irqsave(&etrax_epid_lock, flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); + nop(); + if (dirout) { + toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); + } else { + toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); + } + spin_unlock_irqrestore(&etrax_epid_lock, flags); + return toggle; +} + + +static inline __u32 etrax_epid_get(__u8 index) { + unsigned long flags; + __u32 data; + spin_lock_irqsave(&etrax_epid_lock, flags); + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); + nop(); + data = *R_USB_EPT_DATA; + spin_unlock_irqrestore(&etrax_epid_lock, flags); + return data; +} + + + + +/* Main functions for Transfer Controller */ +/* -------------------------------------- */ + +/* Init structs, memories and lists used by Transfer Controller */ +int tc_init(struct usb_hcd *hcd) { + int i; + /* Clear software state info for all epids */ + memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS); + + /* Set Invalid and Dummy as being in use and disabled */ + epid_state[INVALID_EPID].inuse = 1; + epid_state[DUMMY_EPID].inuse = 1; + epid_state[INVALID_EPID].disabled = 1; + epid_state[DUMMY_EPID].disabled = 1; + + /* Clear counter for how many Isoc epids we have sat up */ + isoc_epid_counter = 0; + + /* Initialize the urb list by initiating a head for each list. + Also reset list hodling active URB for each epid */ + for (i = 0; i < NBR_OF_EPIDS; i++) { + INIT_LIST_HEAD(&urb_list[i]); + activeUrbList[i] = NULL; + } + + /* Init lock for URB lists */ + spin_lock_init(&urb_list_lock); + /* Init lock for Etrax R_USB_EPT register */ + spin_lock_init(&etrax_epid_lock); + /* Init lock for Etrax dma8 sub0 handling */ + spin_lock_init(&etrax_dma8_sub0_lock); + + /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ + + /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also + allocate SB descriptors from this cache. This is ok since + sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */ + usb_desc_cache = kmem_cache_create("usb_desc_cache", + sizeof(struct USB_EP_Desc), 0, + SLAB_HWCACHE_ALIGN, 0); + if(usb_desc_cache == NULL) { + return -ENOMEM; + } + + /* Create slab cache for speedy allocation of memory for isoc bottom-half + interrupt handling */ + isoc_compl_cache = + kmem_cache_create("isoc_compl_cache", + sizeof(struct crisv10_isoc_complete_data), + 0, SLAB_HWCACHE_ALIGN, 0); + if(isoc_compl_cache == NULL) { + return -ENOMEM; + } + + /* Create slab cache for speedy allocation of memory for later URB finish + struct */ + later_data_cache = + kmem_cache_create("later_data_cache", + sizeof(struct urb_later_data), + 0, SLAB_HWCACHE_ALIGN, 0); + if(later_data_cache == NULL) { + return -ENOMEM; + } + + + /* Initiate the bulk start timer. */ + init_timer(&bulk_start_timer); + bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; + bulk_start_timer.function = tc_bulk_start_timer_func; + add_timer(&bulk_start_timer); + + + /* Initiate the bulk eot timer. */ + init_timer(&bulk_eot_timer); + bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; + bulk_eot_timer.function = tc_bulk_eot_timer_func; + bulk_eot_timer.data = (unsigned long)hcd; + add_timer(&bulk_eot_timer); + + return 0; +} + +/* Uninitialize all resources used by Transfer Controller */ +void tc_destroy(void) { + + /* Destroy all slab cache */ + kmem_cache_destroy(usb_desc_cache); + kmem_cache_destroy(isoc_compl_cache); + kmem_cache_destroy(later_data_cache); + + /* Remove timers */ + del_timer(&bulk_start_timer); + del_timer(&bulk_eot_timer); +} + +static void restart_dma8_sub0(void) { + unsigned long flags; + spin_lock_irqsave(&etrax_dma8_sub0_lock, flags); + /* Verify that the dma is not running */ + if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) { + struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP); + while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) { + ep = (struct USB_EP_Desc *)phys_to_virt(ep->next); + } + /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID. */ + *R_DMA_CH8_SUB0_EP = virt_to_phys(ep); + /* Restart the DMA */ + *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); + } + spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags); +} + +/* queue an URB with the transfer controller (called from hcd_driver) */ +static int tc_urb_enqueue(struct usb_hcd *hcd, + struct urb *urb, + gfp_t mem_flags) { + int epid; + int retval; + int bustime = 0; + int maxpacket; + unsigned long flags; + struct crisv10_urb_priv *urb_priv; + struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); + DBFENTER; + + if(!(crisv10_hcd->running)) { + /* The USB Controller is not running, probably because no device is + attached. No idea to enqueue URBs then */ + tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n", + (unsigned int)urb); + return -ENOENT; + } + + maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + /* Special case check for In Isoc transfers. Specification states that each + In Isoc transfer consists of one packet and therefore it should fit into + the transfer-buffer of an URB. + We do the check here to be sure (an invalid scenario can be produced with + parameters to the usbtest suite) */ + if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) && + (urb->transfer_buffer_length < maxpacket)) { + tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket); + return -EMSGSIZE; + } + + /* Check if there is a epid for URBs destination, if not this function + set up one. */ + epid = tc_setup_epid(urb->ep, urb, mem_flags); + if (epid < 0) { + tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb); + DBFEXIT; + return -ENOMEM; + } + + if(urb == activeUrbList[epid]) { + tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb); + return -ENXIO; + } + + if(urb_list_entry(urb, epid)) { + tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb); + return -ENXIO; + } + + /* If we actively have flaged endpoint as disabled then refuse submition */ + if(epid_state[epid].disabled) { + return -ENOENT; + } + + /* Allocate and init HC-private data for URB */ + if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) { + DBFEXIT; + return -ENOMEM; + } + urb_priv = urb->hcpriv; + + /* Check if there is enough bandwidth for periodic transfer */ + if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) { + /* only check (and later claim) if not already claimed */ + if (urb_priv->bandwidth == 0) { + bustime = crisv10_usb_check_bandwidth(urb->dev, urb); + if (bustime < 0) { + tc_err("Not enough periodic bandwidth\n"); + urb_priv_free(hcd, urb); + DBFEXIT; + return -ENOSPC; + } + } + } + + tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n", + (unsigned int)urb, urb_priv->urb_num, epid, + pipe_to_str(urb->pipe), urb->transfer_buffer_length); + + /* Create and link SBs required for this URB */ + retval = create_sb_for_urb(urb, mem_flags); + if(retval != 0) { + tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb, + urb_priv->urb_num); + urb_priv_free(hcd, urb); + DBFEXIT; + return retval; + } + + /* Init intr EP pool if this URB is a INTR transfer. This pool is later + used when inserting EPs in the TxIntrEPList. We do the alloc here + so we can't run out of memory later */ + if(usb_pipeint(urb->pipe)) { + retval = init_intr_urb(urb, mem_flags); + if(retval != 0) { + tc_warn("Failed to init Intr URB\n"); + urb_priv_free(hcd, urb); + DBFEXIT; + return retval; + } + } + + /* Disable other access when inserting USB */ + local_irq_save(flags); + + /* Claim bandwidth, if needed */ + if(bustime) { + crisv10_usb_claim_bandwidth(urb->dev, + urb, + bustime, + (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)); + } + + /* Add URB to EP queue */ + urb_list_add(urb, epid, mem_flags); + + if(usb_pipeisoc(urb->pipe)) { + /* Special processing of Isoc URBs. */ + tc_dma_process_isoc_urb(urb); + } else { + /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ + tc_dma_process_queue(epid); + } + + local_irq_restore(flags); + + DBFEXIT; + return 0; +} + +/* remove an URB from the transfer controller queues (called from hcd_driver)*/ +static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { + struct crisv10_urb_priv *urb_priv; + unsigned long flags; + int epid; + + DBFENTER; + /* Disable interrupts here since a descriptor interrupt for the isoc epid + will modify the sb list. This could possibly be done more granular, but + urb_dequeue should not be used frequently anyway. + */ + local_irq_save(flags); + + urb->status = status; + urb_priv = urb->hcpriv; + + if (!urb_priv) { + /* This happens if a device driver calls unlink on an urb that + was never submitted (lazy driver) or if the urb was completed + while dequeue was being called. */ + tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb); + local_irq_restore(flags); + return 0; + } + epid = urb_priv->epid; + + tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", + (urb == activeUrbList[epid]) ? "active" : "queued", + (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), + str_type(urb->pipe), epid, urb->status, + (urb_priv->later_data) ? "later-sched" : ""); + + /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB + that isn't active can be dequeued by just removing it from the queue */ + if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) || + usb_pipeint(urb->pipe)) { + + /* Check if URB haven't gone further than the queue */ + if(urb != activeUrbList[epid]) { + ASSERT(urb_priv->later_data == NULL); + tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue" + " (not active)\n", (unsigned int)urb, urb_priv->urb_num, + str_dir(urb->pipe), str_type(urb->pipe), epid); + + /* Finish the URB with error status from USB core */ + tc_finish_urb(hcd, urb, urb->status); + local_irq_restore(flags); + return 0; + } + } + + /* Set URB status to Unlink for handling when interrupt comes. */ + urb_priv->urb_state = UNLINK; + + /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */ + switch(usb_pipetype(urb->pipe)) { + case PIPE_BULK: + /* Check if EP still is enabled */ + if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + /* The EP was enabled, disable it. */ + TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + } + /* Kicking dummy list out of the party. */ + TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); + break; + case PIPE_CONTROL: + /* Check if EP still is enabled */ + if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + /* The EP was enabled, disable it. */ + TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + } + break; + case PIPE_ISOCHRONOUS: + /* Disabling, busy-wait and unlinking of Isoc SBs will be done in + finish_isoc_urb(). Because there might the case when URB is dequeued + but there are other valid URBs waiting */ + + /* Check if In Isoc EP still is enabled */ + if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + /* The EP was enabled, disable it. */ + TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + } + break; + case PIPE_INTERRUPT: + /* Special care is taken for interrupt URBs. EPs are unlinked in + tc_finish_urb */ + break; + default: + break; + } + + /* Asynchronous unlink, finish the URB later from scheduled or other + event (data finished, error) */ + tc_finish_urb_later(hcd, urb, urb->status); + + local_irq_restore(flags); + DBFEXIT; + return 0; +} + + +static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) { + volatile int timeout = 10000; + struct urb* urb; + struct crisv10_urb_priv* urb_priv; + unsigned long flags; + + volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ + volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ + volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ + + int type = epid_state[epid].type; + + /* Setting this flag will cause enqueue() to return -ENOENT for new + submitions on this endpoint and finish_urb() wont process queue further */ + epid_state[epid].disabled = 1; + + switch(type) { + case PIPE_BULK: + /* Check if EP still is enabled */ + if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + /* The EP was enabled, disable it. */ + TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); + + /* Do busy-wait until DMA not using this EP descriptor anymore */ + while((*R_DMA_CH8_SUB0_EP == + virt_to_phys(&TxBulkEPList[epid])) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for DMA-TX-Bulk to leave EP for" + " epid:%d\n", epid); + } + } + break; + + case PIPE_CONTROL: + /* Check if EP still is enabled */ + if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + /* The EP was enabled, disable it. */ + TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); + + /* Do busy-wait until DMA not using this EP descriptor anymore */ + while((*R_DMA_CH8_SUB1_EP == + virt_to_phys(&TxCtrlEPList[epid])) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for" + " epid:%d\n", epid); + } + } + break; + + case PIPE_INTERRUPT: + local_irq_save(flags); + /* Disable all Intr EPs belonging to epid */ + first_ep = &TxIntrEPList[0]; + curr_ep = first_ep; + do { + next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); + if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { + /* Disable EP */ + next_ep->command &= ~IO_MASK(USB_EP_command, enable); + } + curr_ep = phys_to_virt(curr_ep->next); + } while (curr_ep != first_ep); + + local_irq_restore(flags); + break; + + case PIPE_ISOCHRONOUS: + /* Check if EP still is enabled */ + if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid); + /* The EP was enabled, disable it. */ + TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + + while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for DMA-TX-Isoc to leave EP for" + " epid:%d\n", epid); + } + } + break; + } + + local_irq_save(flags); + + /* Finish if there is active URB for this endpoint */ + if(activeUrbList[epid] != NULL) { + urb = activeUrbList[epid]; + urb_priv = urb->hcpriv; + ASSERT(urb_priv); + tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", + (urb == activeUrbList[epid]) ? "active" : "queued", + (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), + str_type(urb->pipe), epid, urb->status, + (urb_priv->later_data) ? "later-sched" : ""); + + tc_finish_urb(hcd, activeUrbList[epid], -ENOENT); + ASSERT(activeUrbList[epid] == NULL); + } + + /* Finish any queued URBs for this endpoint. There won't be any resubmitions + because epid_disabled causes enqueue() to fail for this endpoint */ + while((urb = urb_list_first(epid)) != NULL) { + urb_priv = urb->hcpriv; + ASSERT(urb_priv); + + tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", + (urb == activeUrbList[epid]) ? "active" : "queued", + (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), + str_type(urb->pipe), epid, urb->status, + (urb_priv->later_data) ? "later-sched" : ""); + + tc_finish_urb(hcd, urb, -ENOENT); + } + epid_state[epid].disabled = 0; + local_irq_restore(flags); +} + +/* free resources associated with an endpoint (called from hcd_driver) */ +static void tc_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) { + DBFENTER; + /* Only free epid if it has been allocated. We get two endpoint_disable + requests for ctrl endpoints so ignore the second one */ + if(ep->hcpriv != NULL) { + struct crisv10_ep_priv *ep_priv = ep->hcpriv; + int epid = ep_priv->epid; + tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n", + (unsigned int)ep, (unsigned int)ep->hcpriv, + endpoint_to_str(&(ep->desc)), epid); + + tc_sync_finish_epid(hcd, epid); + + ASSERT(activeUrbList[epid] == NULL); + ASSERT(list_empty(&urb_list[epid])); + + tc_free_epid(ep); + } else { + tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep, + (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc))); + } + DBFEXIT; +} + +static void tc_finish_urb_later_proc(struct work_struct* work) { + unsigned long flags; + struct urb_later_data* uld; + + local_irq_save(flags); + uld = container_of(work, struct urb_later_data, dws.work); + if(uld->urb == NULL) { + late_dbg("Later finish of URB = NULL (allready finished)\n"); + } else { + struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv; + ASSERT(urb_priv); + if(urb_priv->urb_num == uld->urb_num) { + late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb), + urb_priv->urb_num); + if(uld->status != uld->urb->status) { + errno_dbg("Later-finish URB with status:%d, later-status:%d\n", + uld->urb->status, uld->status); + } + if(uld != urb_priv->later_data) { + panic("Scheduled uld not same as URBs uld\n"); + } + tc_finish_urb(uld->hcd, uld->urb, uld->status); + } else { + late_warn("Ignoring later finish of URB:0x%x[%d]" + ", urb_num doesn't match current URB:0x%x[%d]", + (unsigned int)(uld->urb), uld->urb_num, + (unsigned int)(uld->urb), urb_priv->urb_num); + } + } + local_irq_restore(flags); + kmem_cache_free(later_data_cache, uld); +} + +static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, + int status) { + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + struct urb_later_data* uld; + + ASSERT(urb_priv); + + if(urb_priv->later_data != NULL) { + /* Later-finish allready scheduled for this URB, just update status to + return when finishing later */ + errno_dbg("Later-finish schedule change URB status:%d with new" + " status:%d\n", urb_priv->later_data->status, status); + + urb_priv->later_data->status = status; + return; + } + + uld = kmem_cache_alloc(later_data_cache, GFP_ATOMIC); + ASSERT(uld); + + uld->hcd = hcd; + uld->urb = urb; + uld->urb_num = urb_priv->urb_num; + uld->status = status; + + INIT_DELAYED_WORK(&uld->dws, tc_finish_urb_later_proc); + urb_priv->later_data = uld; + + /* Schedule the finishing of the URB to happen later */ + schedule_delayed_work(&uld->dws, LATER_TIMER_DELAY); +} + +static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, + int status); + +static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) { + struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + int epid; + char toggle; + int urb_num; + + DBFENTER; + ASSERT(urb_priv != NULL); + epid = urb_priv->epid; + urb_num = urb_priv->urb_num; + + if(urb != activeUrbList[epid]) { + if(urb_list_entry(urb, epid)) { + /* Remove this URB from the list. Only happens when URB are finished + before having been processed (dequeing) */ + urb_list_del(urb, epid); + } else { + tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for" + " epid:%d\n", (unsigned int)urb, urb_num, epid); + } + } + + /* Cancel any pending later-finish of this URB */ + if(urb_priv->later_data) { + urb_priv->later_data->urb = NULL; + } + + /* For an IN pipe, we always set the actual length, regardless of whether + there was an error or not (which means the device driver can use the data + if it wants to). */ + if(usb_pipein(urb->pipe)) { + urb->actual_length = urb_priv->rx_offset; + } else { + /* Set actual_length for OUT urbs also; the USB mass storage driver seems + to want that. */ + if (status == 0 && urb->status == -EINPROGRESS) { + urb->actual_length = urb->transfer_buffer_length; + } else { + /* We wouldn't know of any partial writes if there was an error. */ + urb->actual_length = 0; + } + } + + + /* URB status mangling */ + if(urb->status == -EINPROGRESS) { + /* The USB core hasn't changed the status, let's set our finish status */ + urb->status = status; + + if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) && + usb_pipein(urb->pipe) && + (urb->actual_length != urb->transfer_buffer_length)) { + /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's + max length) is to be treated as an error. */ + errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short" + " data:%d\n", (unsigned int)urb, urb_num, + urb->actual_length); + urb->status = -EREMOTEIO; + } + + if(urb_priv->urb_state == UNLINK) { + /* URB has been requested to be unlinked asynchronously */ + urb->status = -ECONNRESET; + errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n", + (unsigned int)urb, urb_num, urb->status); + } + } else { + /* The USB Core wants to signal some error via the URB, pass it through */ + } + + /* use completely different finish function for Isoc URBs */ + if(usb_pipeisoc(urb->pipe)) { + tc_finish_isoc_urb(hcd, urb, status); + return; + } + + /* Do special unlinking of EPs for Intr traffic */ + if(usb_pipeint(urb->pipe)) { + tc_dma_unlink_intr_urb(urb); + } + + /* Release allocated bandwidth for periodic transfers */ + if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) + crisv10_usb_release_bandwidth(hcd, + usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS, + urb_priv->bandwidth); + + /* This URB is active on EP */ + if(urb == activeUrbList[epid]) { + /* We need to fiddle with the toggle bits because the hardware doesn't do + it for us. */ + toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe)); + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), toggle); + + /* Checks for Ctrl and Bulk EPs */ + switch(usb_pipetype(urb->pipe)) { + case PIPE_BULK: + /* Check so Bulk EP realy is disabled before finishing active URB */ + ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) == + IO_STATE(USB_EP_command, enable, no)); + /* Disable sub-pointer for EP to avoid next tx_interrupt() to + process Bulk EP. */ + TxBulkEPList[epid].sub = 0; + /* No need to wait for the DMA before changing the next pointer. + The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use + the last one (INVALID_EPID) for actual traffic. */ + TxBulkEPList[epid].next = + virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); + break; + case PIPE_CONTROL: + /* Check so Ctrl EP realy is disabled before finishing active URB */ + ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) == + IO_STATE(USB_EP_command, enable, no)); + /* Disable sub-pointer for EP to avoid next tx_interrupt() to + process Ctrl EP. */ + TxCtrlEPList[epid].sub = 0; + break; + } + } + + /* Free HC-private URB data*/ + urb_priv_free(hcd, urb); + + if(urb->status) { + errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", + (unsigned int)urb, urb_num, str_dir(urb->pipe), + str_type(urb->pipe), urb->actual_length, urb->status); + } else { + tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", + (unsigned int)urb, urb_num, str_dir(urb->pipe), + str_type(urb->pipe), urb->actual_length, urb->status); + } + + /* If we just finished an active URB, clear active pointer. */ + if (urb == activeUrbList[epid]) { + /* Make URB not active on EP anymore */ + activeUrbList[epid] = NULL; + + if(urb->status == 0) { + /* URB finished sucessfully, process queue to see if there are any more + URBs waiting before we call completion function.*/ + if(crisv10_hcd->running) { + /* Only process queue if USB controller is running */ + tc_dma_process_queue(epid); + } else { + tc_warn("No processing of queue for epid:%d, USB Controller not" + " running\n", epid); + } + } + } + + /* Hand the URB from HCD to its USB device driver, using its completion + functions */ + usb_hcd_giveback_urb (hcd, urb, status); + + /* Check the queue once more if the URB returned with error, because we + didn't do it before the completion function because the specification + states that the queue should not restart until all it's unlinked + URBs have been fully retired, with the completion functions run */ + if(crisv10_hcd->running) { + /* Only process queue if USB controller is running */ + tc_dma_process_queue(epid); + } else { + tc_warn("No processing of queue for epid:%d, USB Controller not running\n", + epid); + } + + DBFEXIT; +} + +static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, + int status) { + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + int epid, i; + volatile int timeout = 10000; + int bandwidth = 0; + + ASSERT(urb_priv); + epid = urb_priv->epid; + + ASSERT(usb_pipeisoc(urb->pipe)); + + /* Set that all isoc packets have status and length set before + completing the urb. */ + for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){ + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = -EPROTO; + } + + /* Check if the URB is currently active (done or error) */ + if(urb == activeUrbList[epid]) { + /* Check if there are another In Isoc URB queued for this epid */ + if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) { + /* Move it from queue to active and mark it started so Isoc transfers + won't be interrupted. + All Isoc URBs data transfers are already added to DMA lists so we + don't have to insert anything in DMA lists here. */ + activeUrbList[epid] = urb_list_first(epid); + ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state = + STARTED; + urb_list_del(activeUrbList[epid], epid); + + if(urb->status) { + errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" + " status:%d, new waiting URB:0x%x[%d]\n", + (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), + str_type(urb->pipe), urb_priv->isoc_packet_counter, + urb->number_of_packets, urb->status, + (unsigned int)activeUrbList[epid], + ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num); + } + + } else { /* No other URB queued for this epid */ + if(urb->status) { + errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" + " status:%d, no new URB waiting\n", + (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), + str_type(urb->pipe), urb_priv->isoc_packet_counter, + urb->number_of_packets, urb->status); + } + + /* Check if EP is still enabled, then shut it down. */ + if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid); + + /* Should only occur for In Isoc EPs where SB isn't consumed. */ + ASSERT(usb_pipein(urb->pipe)); + + /* Disable it and wait for it to stop */ + TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); + + /* Ah, the luxury of busy-wait. */ + while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid); + } + } + + /* Unlink SB to say that epid is finished. */ + TxIsocEPList[epid].sub = 0; + TxIsocEPList[epid].hw_len = 0; + + /* No URB active for EP anymore */ + activeUrbList[epid] = NULL; + } + } else { /* Finishing of not active URB (queued up with SBs thought) */ + isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d," + " SB queued but not active\n", + (unsigned int)urb, str_dir(urb->pipe), + urb_priv->isoc_packet_counter, urb->number_of_packets, + urb->status); + if(usb_pipeout(urb->pipe)) { + /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */ + struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb; + + iter_sb = TxIsocEPList[epid].sub ? + phys_to_virt(TxIsocEPList[epid].sub) : 0; + prev_sb = 0; + + /* SB that is linked before this URBs first SB */ + while (iter_sb && (iter_sb != urb_priv->first_sb)) { + prev_sb = iter_sb; + iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; + } + + if (iter_sb == 0) { + /* Unlink of the URB currently being transmitted. */ + prev_sb = 0; + iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; + } + + while (iter_sb && (iter_sb != urb_priv->last_sb)) { + iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; + } + + if (iter_sb) { + next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; + } else { + /* This should only happen if the DMA has completed + processing the SB list for this EP while interrupts + are disabled. */ + isoc_dbg("Isoc urb not found, already sent?\n"); + next_sb = 0; + } + if (prev_sb) { + prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; + } else { + TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; + } + } + } + + /* Free HC-private URB data*/ + bandwidth = urb_priv->bandwidth; + urb_priv_free(hcd, urb); + + crisv10_usb_release_bandwidth(hcd, usb_pipeisoc(urb->pipe), bandwidth); + + /* Hand the URB from HCD to its USB device driver, using its completion + functions */ + usb_hcd_giveback_urb (hcd, urb, status); +} + +static __u32 urb_num = 0; + +/* allocate and initialize URB private data */ +static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, + int mem_flags) { + struct crisv10_urb_priv *urb_priv; + + urb_priv = kmalloc(sizeof *urb_priv, mem_flags); + if (!urb_priv) + return -ENOMEM; + memset(urb_priv, 0, sizeof *urb_priv); + + urb_priv->epid = epid; + urb_priv->urb_state = NOT_STARTED; + + urb->hcpriv = urb_priv; + /* Assign URB a sequence number, and increment counter */ + urb_priv->urb_num = urb_num; + urb_num++; + urb_priv->bandwidth = 0; + return 0; +} + +/* free URB private data */ +static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) { + int i; + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + ASSERT(urb_priv != 0); + + /* Check it has any SBs linked that needs to be freed*/ + if(urb_priv->first_sb != NULL) { + struct USB_SB_Desc *next_sb, *first_sb, *last_sb; + int i = 0; + first_sb = urb_priv->first_sb; + last_sb = urb_priv->last_sb; + ASSERT(last_sb); + while(first_sb != last_sb) { + next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next); + kmem_cache_free(usb_desc_cache, first_sb); + first_sb = next_sb; + i++; + } + kmem_cache_free(usb_desc_cache, last_sb); + i++; + } + + /* Check if it has any EPs in its Intr pool that also needs to be freed */ + if(urb_priv->intr_ep_pool_length > 0) { + for(i = 0; i < urb_priv->intr_ep_pool_length; i++) { + kfree(urb_priv->intr_ep_pool[i]); + } + /* + tc_dbg("Freed %d EPs from URB:0x%x EP pool\n", + urb_priv->intr_ep_pool_length, (unsigned int)urb); + */ + } + + kfree(urb_priv); + urb->hcpriv = NULL; +} + +static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) { + struct crisv10_ep_priv *ep_priv; + + ep_priv = kmalloc(sizeof *ep_priv, mem_flags); + if (!ep_priv) + return -ENOMEM; + memset(ep_priv, 0, sizeof *ep_priv); + + ep->hcpriv = ep_priv; + return 0; +} + +static void ep_priv_free(struct usb_host_endpoint *ep) { + struct crisv10_ep_priv *ep_priv = ep->hcpriv; + ASSERT(ep_priv); + kfree(ep_priv); + ep->hcpriv = NULL; +} + +/* + * usb_check_bandwidth(): + * + * old_alloc is from host_controller->bandwidth_allocated in microseconds; + * bustime is from calc_bus_time(), but converted to microseconds. + * + * returns if successful, + * or -ENOSPC if bandwidth request fails. + * + * FIXME: + * This initial implementation does not use Endpoint.bInterval + * in managing bandwidth allocation. + * It probably needs to be expanded to use Endpoint.bInterval. + * This can be done as a later enhancement (correction). + * + * This will also probably require some kind of + * frame allocation tracking...meaning, for example, + * that if multiple drivers request interrupts every 10 USB frames, + * they don't all have to be allocated at + * frame numbers N, N+10, N+20, etc. Some of them could be at + * N+11, N+21, N+31, etc., and others at + * N+12, N+22, N+32, etc. + * + * Similarly for isochronous transfers... + * + * Individual HCDs can schedule more directly ... this logic + * is not correct for high speed transfers. + */ +static int crisv10_usb_check_bandwidth( + struct usb_device *dev, + struct urb *urb) +{ + unsigned int pipe = urb->pipe; + long bustime; + int is_in = usb_pipein (pipe); + int is_iso = usb_pipeisoc (pipe); + int old_alloc = dev->bus->bandwidth_allocated; + int new_alloc; + + bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso, + usb_maxpacket (dev, pipe, !is_in))); + if (is_iso) + bustime /= urb->number_of_packets; + + new_alloc = old_alloc + (int) bustime; + if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) { + dev_dbg (&dev->dev, "usb_check_bandwidth FAILED: %d + %ld = %d usec\n", + old_alloc, bustime, new_alloc); + bustime = -ENOSPC; /* report error */ + } + + return bustime; +} + +/** + * usb_claim_bandwidth - records bandwidth for a periodic transfer + * @dev: source/target of request + * @urb: request (urb->dev == dev) + * @bustime: bandwidth consumed, in (average) microseconds per frame + * @isoc: true iff the request is isochronous + * + * HCDs are expected not to overcommit periodic bandwidth, and to record such + * reservations whenever endpoints are added to the periodic schedule. + * + * FIXME averaging per-frame is suboptimal. Better to sum over the HCD's + * entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable + * for EHCI (256/512/1024 frames, default 1024) and have the bus expose how + * large its periodic schedule is. + */ +static void crisv10_usb_claim_bandwidth( + struct usb_device *dev, + struct urb *urb, int bustime, int isoc) +{ + dev->bus->bandwidth_allocated += bustime; + if (isoc) + dev->bus->bandwidth_isoc_reqs++; + else + dev->bus->bandwidth_int_reqs++; + struct crisv10_urb_priv *urb_priv; + urb_priv = urb->hcpriv; + urb_priv->bandwidth = bustime; +} + +/** + * usb_release_bandwidth - reverses effect of usb_claim_bandwidth() + * @hcd: host controller + * @isoc: true iff the request is isochronous + * @bandwidth: bandwidth returned + * + * This records that previously allocated bandwidth has been released. + * Bandwidth is released when endpoints are removed from the host controller's + * periodic schedule. + */ +static void crisv10_usb_release_bandwidth( + struct usb_hcd *hcd, + int isoc, + int bandwidth) +{ + hcd_to_bus(hcd)->bandwidth_allocated -= bandwidth; + if (isoc) + hcd_to_bus(hcd)->bandwidth_isoc_reqs--; + else + hcd_to_bus(hcd)->bandwidth_int_reqs--; +} + + +/* EPID handling functions, managing EP-list in Etrax through wrappers */ +/* ------------------------------------------------------------------- */ + +/* Sets up a new EPID for an endpoint or returns existing if found */ +static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, + int mem_flags) { + int epid; + char devnum, endpoint, out_traffic, slow; + int maxlen; + __u32 epid_data; + struct crisv10_ep_priv *ep_priv = ep->hcpriv; + + DBFENTER; + + /* Check if a valid epid already is setup for this endpoint */ + if(ep_priv != NULL) { + return ep_priv->epid; + } + + /* We must find and initiate a new epid for this urb. */ + epid = tc_allocate_epid(); + + if (epid == -1) { + /* Failed to allocate a new epid. */ + DBFEXIT; + return epid; + } + + /* We now have a new epid to use. Claim it. */ + epid_state[epid].inuse = 1; + + /* Init private data for new endpoint */ + if(ep_priv_create(ep, mem_flags) != 0) { + return -ENOMEM; + } + ep_priv = ep->hcpriv; + ep_priv->epid = epid; + + devnum = usb_pipedevice(urb->pipe); + endpoint = usb_pipeendpoint(urb->pipe); + slow = (urb->dev->speed == USB_SPEED_LOW); + maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); + + if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { + /* We want both IN and OUT control traffic to be put on the same + EP/SB list. */ + out_traffic = 1; + } else { + out_traffic = usb_pipeout(urb->pipe); + } + + if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { + epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | + /* FIXME: Change any to the actual port? */ + IO_STATE(R_USB_EPT_DATA_ISO, port, any) | + IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | + IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | + IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); + etrax_epid_iso_set(epid, epid_data); + } else { + epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) | + IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | + /* FIXME: Change any to the actual port? */ + IO_STATE(R_USB_EPT_DATA, port, any) | + IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | + IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | + IO_FIELD(R_USB_EPT_DATA, dev, devnum); + etrax_epid_set(epid, epid_data); + } + + epid_state[epid].out_traffic = out_traffic; + epid_state[epid].type = usb_pipetype(urb->pipe); + + tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n", + (unsigned int)ep, epid, devnum, endpoint, maxlen, + str_type(urb->pipe), out_traffic ? "out" : "in", + slow ? "low" : "full"); + + /* Enable Isoc eof interrupt if we set up the first Isoc epid */ + if(usb_pipeisoc(urb->pipe)) { + isoc_epid_counter++; + if(isoc_epid_counter == 1) { + isoc_warn("Enabled Isoc eof interrupt\n"); + *R_USB_IRQ_MASK_SET = IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); + } + } + + DBFEXIT; + return epid; +} + +static void tc_free_epid(struct usb_host_endpoint *ep) { + unsigned long flags; + struct crisv10_ep_priv *ep_priv = ep->hcpriv; + int epid; + volatile int timeout = 10000; + + DBFENTER; + + if (ep_priv == NULL) { + tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep); + DBFEXIT; + return; + } + + epid = ep_priv->epid; + + /* Disable Isoc eof interrupt if we free the last Isoc epid */ + if(epid_isoc(epid)) { + ASSERT(isoc_epid_counter > 0); + isoc_epid_counter--; + if(isoc_epid_counter == 0) { + *R_USB_IRQ_MASK_CLR = IO_STATE(R_USB_IRQ_MASK_CLR, iso_eof, clr); + isoc_warn("Disabled Isoc eof interrupt\n"); + } + } + + /* Take lock manualy instead of in epid_x_x wrappers, + because we need to be polling here */ + spin_lock_irqsave(&etrax_epid_lock, flags); + + *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); + nop(); + while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for epid:%d to drop hold\n", epid); + } + /* This will, among other things, set the valid field to 0. */ + *R_USB_EPT_DATA = 0; + spin_unlock_irqrestore(&etrax_epid_lock, flags); + + /* Free resource in software state info list */ + epid_state[epid].inuse = 0; + + /* Free private endpoint data */ + ep_priv_free(ep); + + DBFEXIT; +} + +static int tc_allocate_epid(void) { + int i; + DBFENTER; + for (i = 0; i < NBR_OF_EPIDS; i++) { + if (!epid_inuse(i)) { + DBFEXIT; + return i; + } + } + + tc_warn("Found no free epids\n"); + DBFEXIT; + return -1; +} + + +/* Wrappers around the list functions (include/linux/list.h). */ +/* ---------------------------------------------------------- */ +static inline int __urb_list_empty(int epid) { + int retval; + retval = list_empty(&urb_list[epid]); + return retval; +} + +/* Returns first urb for this epid, or NULL if list is empty. */ +static inline struct urb *urb_list_first(int epid) { + unsigned long flags; + struct urb *first_urb = 0; + spin_lock_irqsave(&urb_list_lock, flags); + if (!__urb_list_empty(epid)) { + /* Get the first urb (i.e. head->next). */ + urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); + first_urb = urb_entry->urb; + } + spin_unlock_irqrestore(&urb_list_lock, flags); + return first_urb; +} + +/* Adds an urb_entry last in the list for this epid. */ +static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) { + unsigned long flags; + urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags); + ASSERT(urb_entry); + + urb_entry->urb = urb; + spin_lock_irqsave(&urb_list_lock, flags); + list_add_tail(&urb_entry->list, &urb_list[epid]); + spin_unlock_irqrestore(&urb_list_lock, flags); +} + +/* Search through the list for an element that contains this urb. (The list + is expected to be short and the one we are about to delete will often be + the first in the list.) + Should be protected by spin_locks in calling function */ +static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { + struct list_head *entry; + struct list_head *tmp; + urb_entry_t *urb_entry; + + list_for_each_safe(entry, tmp, &urb_list[epid]) { + urb_entry = list_entry(entry, urb_entry_t, list); + ASSERT(urb_entry); + ASSERT(urb_entry->urb); + + if (urb_entry->urb == urb) { + return urb_entry; + } + } + return 0; +} + +/* Same function as above but for global use. Protects list by spinlock */ +static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) { + unsigned long flags; + urb_entry_t *urb_entry; + spin_lock_irqsave(&urb_list_lock, flags); + urb_entry = __urb_list_entry(urb, epid); + spin_unlock_irqrestore(&urb_list_lock, flags); + return (urb_entry); +} + +/* Delete an urb from the list. */ +static inline void urb_list_del(struct urb *urb, int epid) { + unsigned long flags; + urb_entry_t *urb_entry; + + /* Delete entry and free. */ + spin_lock_irqsave(&urb_list_lock, flags); + urb_entry = __urb_list_entry(urb, epid); + ASSERT(urb_entry); + + list_del(&urb_entry->list); + spin_unlock_irqrestore(&urb_list_lock, flags); + kfree(urb_entry); +} + +/* Move an urb to the end of the list. */ +static inline void urb_list_move_last(struct urb *urb, int epid) { + unsigned long flags; + urb_entry_t *urb_entry; + + spin_lock_irqsave(&urb_list_lock, flags); + urb_entry = __urb_list_entry(urb, epid); + ASSERT(urb_entry); + + list_del(&urb_entry->list); + list_add_tail(&urb_entry->list, &urb_list[epid]); + spin_unlock_irqrestore(&urb_list_lock, flags); +} + +/* Get the next urb in the list. */ +static inline struct urb *urb_list_next(struct urb *urb, int epid) { + unsigned long flags; + urb_entry_t *urb_entry; + + spin_lock_irqsave(&urb_list_lock, flags); + urb_entry = __urb_list_entry(urb, epid); + ASSERT(urb_entry); + + if (urb_entry->list.next != &urb_list[epid]) { + struct list_head *elem = urb_entry->list.next; + urb_entry = list_entry(elem, urb_entry_t, list); + spin_unlock_irqrestore(&urb_list_lock, flags); + return urb_entry->urb; + } else { + spin_unlock_irqrestore(&urb_list_lock, flags); + return NULL; + } +} + +struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc, + int mem_flags) { + struct USB_EP_Desc *ep_desc; + ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags); + if(ep_desc == NULL) + return NULL; + memset(ep_desc, 0, sizeof(struct USB_EP_Desc)); + + ep_desc->hw_len = 0; + ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | + IO_STATE(USB_EP_command, enable, yes)); + if(sb_desc == NULL) { + ep_desc->sub = 0; + } else { + ep_desc->sub = virt_to_phys(sb_desc); + } + return ep_desc; +} + +#define TT_ZOUT 0 +#define TT_IN 1 +#define TT_OUT 2 +#define TT_SETUP 3 + +#define CMD_EOL IO_STATE(USB_SB_command, eol, yes) +#define CMD_INTR IO_STATE(USB_SB_command, intr, yes) +#define CMD_FULL IO_STATE(USB_SB_command, full, yes) + +/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT + SBs. Also used by create_sb_in() to avoid same allocation procedure at two + places */ +struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data, + int datalen, int mem_flags) { + struct USB_SB_Desc *sb_desc; + sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); + if(sb_desc == NULL) + return NULL; + memset(sb_desc, 0, sizeof(struct USB_SB_Desc)); + + sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) | + IO_STATE(USB_SB_command, eot, yes); + + sb_desc->sw_len = datalen; + if(data != NULL) { + sb_desc->buf = virt_to_phys(data); + } else { + sb_desc->buf = 0; + } + if(sb_prev != NULL) { + sb_prev->next = virt_to_phys(sb_desc); + } + return sb_desc; +} + +/* Creates a copy of an existing SB by allocation space for it and copy + settings */ +struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) { + struct USB_SB_Desc *sb_desc; + sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); + if(sb_desc == NULL) + return NULL; + + memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc)); + return sb_desc; +} + +/* A specific create_sb function for creation of in SBs. This is due to + that datalen in In SBs shows how many packets we are expecting. It also + sets up the rem field to show if how many bytes we expect in last packet + if it's not a full one */ +struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen, + int maxlen, int mem_flags) { + struct USB_SB_Desc *sb_desc; + sb_desc = create_sb(sb_prev, TT_IN, NULL, + datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags); + if(sb_desc == NULL) + return NULL; + sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen); + return sb_desc; +} + +void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) { + sb_desc->command |= flags; +} + +int create_sb_for_urb(struct urb *urb, int mem_flags) { + int is_out = !usb_pipein(urb->pipe); + int type = usb_pipetype(urb->pipe); + int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out); + int buf_len = urb->transfer_buffer_length; + void *buf = buf_len > 0 ? urb->transfer_buffer : NULL; + struct USB_SB_Desc *sb_desc = NULL; + + struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv != NULL); + + switch(type) { + case PIPE_CONTROL: + /* Setup stage */ + sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + set_sb_cmds(sb_desc, CMD_FULL); + + /* Attach first SB to URB */ + urb_priv->first_sb = sb_desc; + + if (is_out) { /* Out Control URB */ + /* If this Control OUT transfer has an optional data stage we add + an OUT token before the mandatory IN (status) token */ + if ((buf_len > 0) && buf) { + sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + set_sb_cmds(sb_desc, CMD_FULL); + } + + /* Status stage */ + /* The data length has to be exactly 1. This is due to a requirement + of the USB specification that a host must be prepared to receive + data in the status phase */ + sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + } else { /* In control URB */ + /* Data stage */ + sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + + /* Status stage */ + /* Read comment at zout_buffer declaration for an explanation to this. */ + sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + /* Set descriptor interrupt flag for in URBs so we can finish URB after + zout-packet has been sent */ + set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL); + } + /* Set end-of-list flag in last SB */ + set_sb_cmds(sb_desc, CMD_EOL); + /* Attach last SB to URB */ + urb_priv->last_sb = sb_desc; + break; + + case PIPE_BULK: + if (is_out) { /* Out Bulk URB */ + sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + /* The full field is set to yes, even if we don't actually check that + this is a full-length transfer (i.e., that transfer_buffer_length % + maxlen = 0). + Setting full prevents the USB controller from sending an empty packet + in that case. However, if URB_ZERO_PACKET was set we want that. */ + if (!(urb->transfer_flags & URB_ZERO_PACKET)) { + set_sb_cmds(sb_desc, CMD_FULL); + } + } else { /* In Bulk URB */ + sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + } + /* Set end-of-list flag for last SB */ + set_sb_cmds(sb_desc, CMD_EOL); + + /* Attach SB to URB */ + urb_priv->first_sb = sb_desc; + urb_priv->last_sb = sb_desc; + break; + + case PIPE_INTERRUPT: + if(is_out) { /* Out Intr URB */ + sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + + /* The full field is set to yes, even if we don't actually check that + this is a full-length transfer (i.e., that transfer_buffer_length % + maxlen = 0). + Setting full prevents the USB controller from sending an empty packet + in that case. However, if URB_ZERO_PACKET was set we want that. */ + if (!(urb->transfer_flags & URB_ZERO_PACKET)) { + set_sb_cmds(sb_desc, CMD_FULL); + } + /* Only generate TX interrupt if it's a Out URB*/ + set_sb_cmds(sb_desc, CMD_INTR); + + } else { /* In Intr URB */ + sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + } + /* Set end-of-list flag for last SB */ + set_sb_cmds(sb_desc, CMD_EOL); + + /* Attach SB to URB */ + urb_priv->first_sb = sb_desc; + urb_priv->last_sb = sb_desc; + + break; + case PIPE_ISOCHRONOUS: + if(is_out) { /* Out Isoc URB */ + int i; + if(urb->number_of_packets == 0) { + tc_err("Can't create SBs for Isoc URB with zero packets\n"); + return -EPIPE; + } + /* Create one SB descriptor for each packet and link them together. */ + for(i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].length > 0) { + + sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].length, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + + /* Check if it's a full length packet */ + if (urb->iso_frame_desc[i].length == + usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { + set_sb_cmds(sb_desc, CMD_FULL); + } + + } else { /* zero length packet */ + sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + set_sb_cmds(sb_desc, CMD_FULL); + } + /* Attach first SB descriptor to URB */ + if (i == 0) { + urb_priv->first_sb = sb_desc; + } + } + /* Set interrupt and end-of-list flags in last SB */ + set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL); + /* Attach last SB descriptor to URB */ + urb_priv->last_sb = sb_desc; + tc_dbg("Created %d out SBs for Isoc URB:0x%x\n", + urb->number_of_packets, (unsigned int)urb); + } else { /* In Isoc URB */ + /* Actual number of packets is not relevant for periodic in traffic as + long as it is more than zero. Set to 1 always. */ + sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); + if(sb_desc == NULL) + return -ENOMEM; + /* Set end-of-list flags for SB */ + set_sb_cmds(sb_desc, CMD_EOL); + + /* Attach SB to URB */ + urb_priv->first_sb = sb_desc; + urb_priv->last_sb = sb_desc; + } + break; + default: + tc_err("Unknown pipe-type\n"); + return -EPIPE; + break; + } + return 0; +} + +int init_intr_urb(struct urb *urb, int mem_flags) { + struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + struct USB_EP_Desc* ep_desc; + int interval; + int i; + int ep_count; + + ASSERT(urb_priv != NULL); + ASSERT(usb_pipeint(urb->pipe)); + /* We can't support interval longer than amount of eof descriptors in + TxIntrEPList */ + if(urb->interval > MAX_INTR_INTERVAL) { + tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval, + MAX_INTR_INTERVAL); + return -EINVAL; + } + + /* We assume that the SB descriptors already have been setup */ + ASSERT(urb_priv->first_sb != NULL); + + /* Round of the interval to 2^n, it is obvious that this code favours + smaller numbers, but that is actually a good thing */ + /* FIXME: The "rounding error" for larger intervals will be quite + large. For in traffic this shouldn't be a problem since it will only + mean that we "poll" more often. */ + interval = urb->interval; + for (i = 0; interval; i++) { + interval = interval >> 1; + } + urb_priv->interval = 1 << (i - 1); + + /* We can only have max interval for Out Interrupt due to that we can only + handle one linked in EP for a certain epid in the Intr descr array at the + time. The USB Controller in the Etrax 100LX continues to process Intr EPs + so we have no way of knowing which one that caused the actual transfer if + we have several linked in. */ + if(usb_pipeout(urb->pipe)) { + urb_priv->interval = MAX_INTR_INTERVAL; + } + + /* Calculate amount of EPs needed */ + ep_count = MAX_INTR_INTERVAL / urb_priv->interval; + + for(i = 0; i < ep_count; i++) { + ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags); + if(ep_desc == NULL) { + /* Free any descriptors that we may have allocated before failure */ + while(i > 0) { + i--; + kfree(urb_priv->intr_ep_pool[i]); + } + return -ENOMEM; + } + urb_priv->intr_ep_pool[i] = ep_desc; + } + urb_priv->intr_ep_pool_length = ep_count; + return 0; +} + +/* DMA RX/TX functions */ +/* ----------------------- */ + +static void tc_dma_init_rx_list(void) { + int i; + + /* Setup descriptor list except last one */ + for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { + RxDescList[i].sw_len = RX_DESC_BUF_SIZE; + RxDescList[i].command = 0; + RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); + RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); + RxDescList[i].hw_len = 0; + RxDescList[i].status = 0; + + /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as + USB_IN_Desc for the relevant fields.) */ + prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); + + } + /* Special handling of last descriptor */ + RxDescList[i].sw_len = RX_DESC_BUF_SIZE; + RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); + RxDescList[i].next = virt_to_phys(&RxDescList[0]); + RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); + RxDescList[i].hw_len = 0; + RxDescList[i].status = 0; + + /* Setup list pointers that show progress in list */ + myNextRxDesc = &RxDescList[0]; + myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; + + flush_etrax_cache(); + /* Point DMA to first descriptor in list and start it */ + *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); + *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); +} + + +static void tc_dma_init_tx_bulk_list(void) { + int i; + volatile struct USB_EP_Desc *epDescr; + + for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { + epDescr = &(TxBulkEPList[i]); + CHECK_ALIGN(epDescr); + epDescr->hw_len = 0; + epDescr->command = IO_FIELD(USB_EP_command, epid, i); + epDescr->sub = 0; + epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]); + + /* Initiate two EPs, disabled and with the eol flag set. No need for any + preserved epid. */ + + /* The first one has the intr flag set so we get an interrupt when the DMA + channel is about to become disabled. */ + CHECK_ALIGN(&TxBulkDummyEPList[i][0]); + TxBulkDummyEPList[i][0].hw_len = 0; + TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | + IO_STATE(USB_EP_command, eol, yes) | + IO_STATE(USB_EP_command, intr, yes)); + TxBulkDummyEPList[i][0].sub = 0; + TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); + + /* The second one. */ + CHECK_ALIGN(&TxBulkDummyEPList[i][1]); + TxBulkDummyEPList[i][1].hw_len = 0; + TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | + IO_STATE(USB_EP_command, eol, yes)); + TxBulkDummyEPList[i][1].sub = 0; + /* The last dummy's next pointer is the same as the current EP's next pointer. */ + TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); + } + + /* Special handling of last descr in list, make list circular */ + epDescr = &TxBulkEPList[i]; + CHECK_ALIGN(epDescr); + epDescr->hw_len = 0; + epDescr->command = IO_STATE(USB_EP_command, eol, yes) | + IO_FIELD(USB_EP_command, epid, i); + epDescr->sub = 0; + epDescr->next = virt_to_phys(&TxBulkEPList[0]); + + /* Init DMA sub-channel pointers to last item in each list */ + *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); + /* No point in starting the bulk channel yet. + *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ +} + +static void tc_dma_init_tx_ctrl_list(void) { + int i; + volatile struct USB_EP_Desc *epDescr; + + for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { + epDescr = &(TxCtrlEPList[i]); + CHECK_ALIGN(epDescr); + epDescr->hw_len = 0; + epDescr->command = IO_FIELD(USB_EP_command, epid, i); + epDescr->sub = 0; + epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]); + } + /* Special handling of last descr in list, make list circular */ + epDescr = &TxCtrlEPList[i]; + CHECK_ALIGN(epDescr); + epDescr->hw_len = 0; + epDescr->command = IO_STATE(USB_EP_command, eol, yes) | + IO_FIELD(USB_EP_command, epid, i); + epDescr->sub = 0; + epDescr->next = virt_to_phys(&TxCtrlEPList[0]); + + /* Init DMA sub-channel pointers to last item in each list */ + *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]); + /* No point in starting the ctrl channel yet. + *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ +} + + +static void tc_dma_init_tx_intr_list(void) { + int i; + + TxIntrSB_zout.sw_len = 1; + TxIntrSB_zout.next = 0; + TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); + TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | + IO_STATE(USB_SB_command, tt, zout) | + IO_STATE(USB_SB_command, full, yes) | + IO_STATE(USB_SB_command, eot, yes) | + IO_STATE(USB_SB_command, eol, yes)); + + for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { + CHECK_ALIGN(&TxIntrEPList[i]); + TxIntrEPList[i].hw_len = 0; + TxIntrEPList[i].command = + (IO_STATE(USB_EP_command, eof, yes) | + IO_STATE(USB_EP_command, enable, yes) | + IO_FIELD(USB_EP_command, epid, INVALID_EPID)); + TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); + TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); + } + + /* Special handling of last descr in list, make list circular */ + CHECK_ALIGN(&TxIntrEPList[i]); + TxIntrEPList[i].hw_len = 0; + TxIntrEPList[i].command = + (IO_STATE(USB_EP_command, eof, yes) | + IO_STATE(USB_EP_command, eol, yes) | + IO_STATE(USB_EP_command, enable, yes) | + IO_FIELD(USB_EP_command, epid, INVALID_EPID)); + TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); + TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); + + intr_dbg("Initiated Intr EP descriptor list\n"); + + + /* Connect DMA 8 sub-channel 2 to first in list */ + *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); +} + +static void tc_dma_init_tx_isoc_list(void) { + int i; + + DBFENTER; + + /* Read comment at zout_buffer declaration for an explanation to this. */ + TxIsocSB_zout.sw_len = 1; + TxIsocSB_zout.next = 0; + TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); + TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | + IO_STATE(USB_SB_command, tt, zout) | + IO_STATE(USB_SB_command, full, yes) | + IO_STATE(USB_SB_command, eot, yes) | + IO_STATE(USB_SB_command, eol, yes)); + + /* The last isochronous EP descriptor is a dummy. */ + for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { + CHECK_ALIGN(&TxIsocEPList[i]); + TxIsocEPList[i].hw_len = 0; + TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); + TxIsocEPList[i].sub = 0; + TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); + } + + CHECK_ALIGN(&TxIsocEPList[i]); + TxIsocEPList[i].hw_len = 0; + + /* Must enable the last EP descr to get eof interrupt. */ + TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | + IO_STATE(USB_EP_command, eof, yes) | + IO_STATE(USB_EP_command, eol, yes) | + IO_FIELD(USB_EP_command, epid, INVALID_EPID)); + TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); + TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); + + *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); + *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); +} + +static int tc_dma_init(struct usb_hcd *hcd) { + tc_dma_init_rx_list(); + tc_dma_init_tx_bulk_list(); + tc_dma_init_tx_ctrl_list(); + tc_dma_init_tx_intr_list(); + tc_dma_init_tx_isoc_list(); + + if (cris_request_dma(USB_TX_DMA_NBR, + "ETRAX 100LX built-in USB (Tx)", + DMA_VERBOSE_ON_ERROR, + dma_usb)) { + err("Could not allocate DMA ch 8 for USB"); + return -EBUSY; + } + + if (cris_request_dma(USB_RX_DMA_NBR, + "ETRAX 100LX built-in USB (Rx)", + DMA_VERBOSE_ON_ERROR, + dma_usb)) { + err("Could not allocate DMA ch 9 for USB"); + return -EBUSY; + } + + *R_IRQ_MASK2_SET = + /* Note that these interrupts are not used. */ + IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | + /* Sub channel 1 (ctrl) descr. interrupts are used. */ + IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | + IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | + /* Sub channel 3 (isoc) descr. interrupts are used. */ + IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); + + /* Note that the dma9_descr interrupt is not used. */ + *R_IRQ_MASK2_SET = + IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | + IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); + + if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0, + "ETRAX 100LX built-in USB (Rx)", hcd)) { + err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); + return -EBUSY; + } + + if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0, + "ETRAX 100LX built-in USB (Tx)", hcd)) { + err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); + return -EBUSY; + } + + return 0; +} + +static void tc_dma_destroy(void) { + free_irq(ETRAX_USB_RX_IRQ, NULL); + free_irq(ETRAX_USB_TX_IRQ, NULL); + + cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)"); + cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)"); + +} + +static void tc_dma_link_intr_urb(struct urb *urb); + +/* Handle processing of Bulk, Ctrl and Intr queues */ +static void tc_dma_process_queue(int epid) { + struct urb *urb; + struct crisv10_urb_priv *urb_priv; + unsigned long flags; + char toggle; + + if(epid_state[epid].disabled) { + /* Don't process any URBs on a disabled endpoint */ + return; + } + + /* Do not disturb us while fiddling with EPs and epids */ + local_irq_save(flags); + + /* For bulk, Ctrl and Intr can we only have one URB active at a time for + a specific EP. */ + if(activeUrbList[epid] != NULL) { + /* An URB is already active on EP, skip checking queue */ + local_irq_restore(flags); + return; + } + + urb = urb_list_first(epid); + if(urb == NULL) { + /* No URB waiting in EP queue. Nothing do to */ + local_irq_restore(flags); + return; + } + + urb_priv = urb->hcpriv; + ASSERT(urb_priv != NULL); + ASSERT(urb_priv->urb_state == NOT_STARTED); + ASSERT(!usb_pipeisoc(urb->pipe)); + + /* Remove this URB from the queue and move it to active */ + activeUrbList[epid] = urb; + urb_list_del(urb, epid); + + urb_priv->urb_state = STARTED; + + /* Reset error counters (regardless of which direction this traffic is). */ + etrax_epid_clear_error(epid); + + /* Special handling of Intr EP lists */ + if(usb_pipeint(urb->pipe)) { + tc_dma_link_intr_urb(urb); + local_irq_restore(flags); + return; + } + + /* Software must preset the toggle bits for Bulk and Ctrl */ + if(usb_pipecontrol(urb->pipe)) { + /* Toggle bits are initialized only during setup transaction in a + CTRL transfer */ + etrax_epid_set_toggle(epid, 0, 0); + etrax_epid_set_toggle(epid, 1, 0); + } else { + toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe)); + etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle); + } + + tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n", + (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid, + sblist_to_str(urb_priv->first_sb)); + + /* We start the DMA sub channel without checking if it's running or not, + because: + 1) If it's already running, issuing the start command is a nop. + 2) We avoid a test-and-set race condition. */ + switch(usb_pipetype(urb->pipe)) { + case PIPE_BULK: + /* Assert that the EP descriptor is disabled. */ + ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); + + /* Set up and enable the EP descriptor. */ + TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb); + TxBulkEPList[epid].hw_len = 0; + TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); + + /* Check if the dummy list is already with us (if several urbs were queued). */ + if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) { + tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d", + (unsigned long)urb, epid); + + /* We don't need to check if the DMA is at this EP or not before changing the + next pointer, since we will do it in one 32-bit write (EP descriptors are + 32-bit aligned). */ + TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); + } + + restart_dma8_sub0(); + + /* Update/restart the bulk start timer since we just started the channel.*/ + mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); + /* Update/restart the bulk eot timer since we just inserted traffic. */ + mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); + break; + case PIPE_CONTROL: + /* Assert that the EP descriptor is disabled. */ + ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); + + /* Set up and enable the EP descriptor. */ + TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb); + TxCtrlEPList[epid].hw_len = 0; + TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); + + *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); + break; + } + local_irq_restore(flags); +} + +static void tc_dma_link_intr_urb(struct urb *urb) { + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + volatile struct USB_EP_Desc *tmp_ep; + struct USB_EP_Desc *ep_desc; + int i = 0, epid; + int pool_idx = 0; + + ASSERT(urb_priv != NULL); + epid = urb_priv->epid; + ASSERT(urb_priv->interval > 0); + ASSERT(urb_priv->intr_ep_pool_length > 0); + + tmp_ep = &TxIntrEPList[0]; + + /* Only insert one EP descriptor in list for Out Intr URBs. + We can only handle Out Intr with interval of 128ms because + it's not possible to insert several Out Intr EPs because they + are not consumed by the DMA. */ + if(usb_pipeout(urb->pipe)) { + ep_desc = urb_priv->intr_ep_pool[0]; + ASSERT(ep_desc); + ep_desc->next = tmp_ep->next; + tmp_ep->next = virt_to_phys(ep_desc); + i++; + } else { + /* Loop through Intr EP descriptor list and insert EP for URB at + specified interval */ + do { + /* Each EP descriptor with eof flag sat signals a new frame */ + if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { + /* Insert a EP from URBs EP pool at correct interval */ + if ((i % urb_priv->interval) == 0) { + ep_desc = urb_priv->intr_ep_pool[pool_idx]; + ASSERT(ep_desc); + ep_desc->next = tmp_ep->next; + tmp_ep->next = virt_to_phys(ep_desc); + pool_idx++; + ASSERT(pool_idx <= urb_priv->intr_ep_pool_length); + } + i++; + } + tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next); + } while(tmp_ep != &TxIntrEPList[0]); + } + + intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid, + sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx); + + /* We start the DMA sub channel without checking if it's running or not, + because: + 1) If it's already running, issuing the start command is a nop. + 2) We avoid a test-and-set race condition. */ + *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); +} + +static void tc_dma_process_isoc_urb(struct urb *urb) { + unsigned long flags; + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + int epid; + + /* Do not disturb us while fiddling with EPs and epids */ + local_irq_save(flags); + + ASSERT(urb_priv); + ASSERT(urb_priv->first_sb); + epid = urb_priv->epid; + + if(activeUrbList[epid] == NULL) { + /* EP is idle, so make this URB active */ + activeUrbList[epid] = urb; + urb_list_del(urb, epid); + ASSERT(TxIsocEPList[epid].sub == 0); + ASSERT(!(TxIsocEPList[epid].command & + IO_STATE(USB_EP_command, enable, yes))); + + /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/ + if(usb_pipein(urb->pipe)) { + /* Each EP for In Isoc will have only one SB descriptor, setup when + submitting the first active urb. We do it here by copying from URBs + pre-allocated SB. */ + memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb, + sizeof(TxIsocSBList[epid])); + TxIsocEPList[epid].hw_len = 0; + TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid])); + } else { + /* For Out Isoc we attach the pre-allocated list of SBs for the URB */ + TxIsocEPList[epid].hw_len = 0; + TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); + + isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x" + " last_sb::0x%x\n", + (unsigned int)urb, urb_priv->urb_num, epid, + (unsigned int)(urb_priv->first_sb), + (unsigned int)(urb_priv->last_sb)); + } + + if (urb->transfer_flags & URB_ISO_ASAP) { + /* The isoc transfer should be started as soon as possible. The + start_frame field is a return value if URB_ISO_ASAP was set. Comparing + R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN + token is sent 2 frames later. I'm not sure how this affects usage of + the start_frame field by the device driver, or how it affects things + when USB_ISO_ASAP is not set, so therefore there's no compensation for + the 2 frame "lag" here. */ + urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); + TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); + urb_priv->urb_state = STARTED; + isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n", + urb->start_frame); + } else { + /* Not started yet. */ + urb_priv->urb_state = NOT_STARTED; + isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n", + (unsigned int)urb); + } + + } else { + /* An URB is already active on the EP. Leave URB in queue and let + finish_isoc_urb process it after current active URB */ + ASSERT(TxIsocEPList[epid].sub != 0); + + if(usb_pipein(urb->pipe)) { + /* Because there already is a active In URB on this epid we do nothing + and the finish_isoc_urb() function will handle switching to next URB*/ + + } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */ + struct USB_SB_Desc *temp_sb_desc; + + /* Set state STARTED to all Out Isoc URBs added to SB list because we + don't know how many of them that are finished before descr interrupt*/ + urb_priv->urb_state = STARTED; + + /* Find end of current SB list by looking for SB with eol flag sat */ + temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); + while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != + IO_STATE(USB_SB_command, eol, yes)) { + ASSERT(temp_sb_desc->next); + temp_sb_desc = phys_to_virt(temp_sb_desc->next); + } + + isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d" + " sub:0x%x eol:0x%x\n", + (unsigned int)urb, urb_priv->urb_num, + (unsigned int)(urb_priv->first_sb), + (unsigned int)(urb_priv->last_sb), epid, + (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), + (unsigned int)temp_sb_desc); + + /* Next pointer must be set before eol is removed. */ + temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); + /* Clear the previous end of list flag since there is a new in the + added SB descriptor list. */ + temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); + + if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { + __u32 epid_data; + /* 8.8.5 in Designer's Reference says we should check for and correct + any errors in the EP here. That should not be necessary if + epid_attn is handled correctly, so we assume all is ok. */ + epid_data = etrax_epid_iso_get(epid); + if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) != + IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { + isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending" + " URB:0x%x[%d]\n", + IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid, + (unsigned int)urb, urb_priv->urb_num); + } + + /* The SB list was exhausted. */ + if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { + /* The new sublist did not get processed before the EP was + disabled. Setup the EP again. */ + + if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) { + isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted" + ", restarting from this URBs SB:0x%x\n", + epid, (unsigned int)temp_sb_desc, + (unsigned int)(urb_priv->first_sb)); + TxIsocEPList[epid].hw_len = 0; + TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); + urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); + /* Enable the EP again so data gets processed this time */ + TxIsocEPList[epid].command |= + IO_STATE(USB_EP_command, enable, yes); + + } else { + /* The EP has been disabled but not at end this URB (god knows + where). This should generate an epid_attn so we should not be + here */ + isoc_warn("EP was disabled on sb:0x%x before SB list for" + " URB:0x%x[%d] got processed\n", + (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), + (unsigned int)urb, urb_priv->urb_num); + } + } else { + /* This might happend if we are slow on this function and isn't + an error. */ + isoc_dbg("EP was disabled and finished with SBs from appended" + " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num); + } + } + } + } + + /* Start the DMA sub channel */ + *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); + + local_irq_restore(flags); +} + +static void tc_dma_unlink_intr_urb(struct urb *urb) { + struct crisv10_urb_priv *urb_priv = urb->hcpriv; + volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ + volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ + volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ + volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from + the list. */ + int count = 0; + volatile int timeout = 10000; + int epid; + + /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the + List". */ + ASSERT(urb_priv); + ASSERT(urb_priv->intr_ep_pool_length > 0); + epid = urb_priv->epid; + + /* First disable all Intr EPs belonging to epid for this URB */ + first_ep = &TxIntrEPList[0]; + curr_ep = first_ep; + do { + next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); + if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { + /* Disable EP */ + next_ep->command &= ~IO_MASK(USB_EP_command, enable); + } + curr_ep = phys_to_virt(curr_ep->next); + } while (curr_ep != first_ep); + + + /* Now unlink all EPs belonging to this epid from Descr list */ + first_ep = &TxIntrEPList[0]; + curr_ep = first_ep; + do { + next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); + if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { + /* This is the one we should unlink. */ + unlink_ep = next_ep; + + /* Actually unlink the EP from the DMA list. */ + curr_ep->next = unlink_ep->next; + + /* Wait until the DMA is no longer at this descriptor. */ + while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) && + (timeout-- > 0)); + if(timeout == 0) { + warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n"); + } + + count++; + } + curr_ep = phys_to_virt(curr_ep->next); + } while (curr_ep != first_ep); + + if(count != urb_priv->intr_ep_pool_length) { + intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count, + urb_priv->intr_ep_pool_length, (unsigned int)urb, + urb_priv->urb_num); + } else { + intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count, + urb_priv->intr_ep_pool_length, (unsigned int)urb); + } +} + +static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, + int timer) { + unsigned long flags; + int epid; + struct urb *urb; + struct crisv10_urb_priv * urb_priv; + __u32 epid_data; + + /* Protect TxEPList */ + local_irq_save(flags); + + for (epid = 0; epid < NBR_OF_EPIDS; epid++) { + /* A finished EP descriptor is disabled and has a valid sub pointer */ + if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && + (TxBulkEPList[epid].sub != 0)) { + + /* Get the active URB for this epid */ + urb = activeUrbList[epid]; + /* Sanity checks */ + ASSERT(urb); + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + + /* Only handle finished out Bulk EPs here, + and let RX interrupt take care of the rest */ + if(!epid_out_traffic(epid)) { + continue; + } + + if(timer) { + tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n", + epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, + urb_priv->urb_num); + } else { + tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n", + epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, + urb_priv->urb_num); + } + + if(urb_priv->urb_state == UNLINK) { + /* This Bulk URB is requested to be unlinked, that means that the EP + has been disabled and we might not have sent all data */ + tc_finish_urb(hcd, urb, urb->status); + continue; + } + + ASSERT(urb_priv->urb_state == STARTED); + if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { + tc_err("Endpoint got disabled before reaching last sb\n"); + } + + epid_data = etrax_epid_get(epid); + if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == + IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { + /* This means that the endpoint has no error, is disabled + and had inserted traffic, i.e. transfer successfully completed. */ + tc_finish_urb(hcd, urb, 0); + } else { + /* Shouldn't happen. We expect errors to be caught by epid + attention. */ + tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n", + epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); + } + } else { + tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid); + } + } + + local_irq_restore(flags); +} + +static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) { + unsigned long flags; + int epid; + struct urb *urb; + struct crisv10_urb_priv * urb_priv; + __u32 epid_data; + + /* Protect TxEPList */ + local_irq_save(flags); + + for (epid = 0; epid < NBR_OF_EPIDS; epid++) { + if(epid == DUMMY_EPID) + continue; + + /* A finished EP descriptor is disabled and has a valid sub pointer */ + if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) && + (TxCtrlEPList[epid].sub != 0)) { + + /* Get the active URB for this epid */ + urb = activeUrbList[epid]; + + if(urb == NULL) { + tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid); + continue; + } + + /* Sanity checks */ + ASSERT(usb_pipein(urb->pipe)); + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) { + tc_err("Endpoint got disabled before reaching last sb\n"); + } + + epid_data = etrax_epid_get(epid); + if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == + IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { + /* This means that the endpoint has no error, is disabled + and had inserted traffic, i.e. transfer successfully completed. */ + + /* Check if RX-interrupt for In Ctrl has been processed before + finishing the URB */ + if(urb_priv->ctrl_rx_done) { + tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n", + (unsigned int)urb, urb_priv->urb_num); + tc_finish_urb(hcd, urb, 0); + } else { + /* If we get zout descriptor interrupt before RX was done for a + In Ctrl transfer, then we flag that and it will be finished + in the RX-Interrupt */ + urb_priv->ctrl_zout_done = 1; + tc_dbg("Got zout descr interrupt before RX interrupt\n"); + } + } else { + /* Shouldn't happen. We expect errors to be caught by epid + attention. */ + tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); + __dump_ep_desc(&(TxCtrlEPList[epid])); + __dump_ept_data(epid); + } + } + } + local_irq_restore(flags); +} + +/* This function goes through all epids that are setup for Out Isoc transfers + and marks (isoc_out_done) all queued URBs that the DMA has finished + transfer for. + No URB completetion is done here to make interrupt routine return quickly. + URBs are completed later with help of complete_isoc_bottom_half() that + becomes schedules when this functions is finished. */ +static void check_finished_isoc_tx_epids(void) { + unsigned long flags; + int epid; + struct urb *urb; + struct crisv10_urb_priv * urb_priv; + struct USB_SB_Desc* sb_desc; + int epid_done; + + /* Protect TxIsocEPList */ + local_irq_save(flags); + + for (epid = 0; epid < NBR_OF_EPIDS; epid++) { + if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID || + !epid_out_traffic(epid)) { + /* Nothing here to see. */ + continue; + } + ASSERT(epid_inuse(epid)); + ASSERT(epid_isoc(epid)); + + sb_desc = phys_to_virt(TxIsocEPList[epid].sub); + /* Find the last descriptor of the currently active URB for this ep. + This is the first descriptor in the sub list marked for a descriptor + interrupt. */ + while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { + sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; + } + ASSERT(sb_desc); + + isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n", + epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), + (unsigned int)sb_desc); + + urb = activeUrbList[epid]; + if(urb == NULL) { + isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid); + continue; + } + + epid_done = 0; + while(urb && !epid_done) { + /* Sanity check. */ + ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); + ASSERT(usb_pipeout(urb->pipe)); + + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + ASSERT(urb_priv->urb_state == STARTED || + urb_priv->urb_state == UNLINK); + + if (sb_desc != urb_priv->last_sb) { + /* This urb has been sent. */ + urb_priv->isoc_out_done = 1; + + } else { /* Found URB that has last_sb as the interrupt reason */ + + /* Check if EP has been disabled, meaning that all transfers are done*/ + if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { + ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) == + IO_STATE(USB_SB_command, eol, yes)); + ASSERT(sb_desc->next == 0); + urb_priv->isoc_out_done = 1; + } else { + isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n", + (unsigned int)urb, urb_priv->urb_num); + } + /* Stop looking any further in queue */ + epid_done = 1; + } + + if (!epid_done) { + if(urb == activeUrbList[epid]) { + urb = urb_list_first(epid); + } else { + urb = urb_list_next(urb, epid); + } + } + } /* END: while(urb && !epid_done) */ + } + + local_irq_restore(flags); +} + + +/* This is where the Out Isoc URBs are realy completed. This function is + scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers + are done. This functions completes all URBs earlier marked with + isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */ + +static void complete_isoc_bottom_half(struct work_struct* work) { + struct crisv10_isoc_complete_data *comp_data; + struct usb_iso_packet_descriptor *packet; + struct crisv10_urb_priv * urb_priv; + unsigned long flags; + struct urb* urb; + int epid_done; + int epid; + int i; + + comp_data = container_of(work, struct crisv10_isoc_complete_data, usb_bh); + + local_irq_save(flags); + + for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { + if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) { + /* Only check valid Out Isoc epids */ + continue; + } + + isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid, + (unsigned int)phys_to_virt(TxIsocEPList[epid].sub)); + + /* The descriptor interrupt handler has marked all transmitted Out Isoc + URBs with isoc_out_done. Now we traverse all epids and for all that + have out Isoc traffic we traverse its URB list and complete the + transmitted URBs. */ + epid_done = 0; + while (!epid_done) { + + /* Get the active urb (if any) */ + urb = activeUrbList[epid]; + if (urb == 0) { + isoc_dbg("No active URB on epid:%d anymore\n", epid); + epid_done = 1; + continue; + } + + /* Sanity check. */ + ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); + ASSERT(usb_pipeout(urb->pipe)); + + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + + if (!(urb_priv->isoc_out_done)) { + /* We have reached URB that isn't flaged done yet, stop traversing. */ + isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d" + " before not yet flaged URB:0x%x[%d]\n", + epid, (unsigned int)urb, urb_priv->urb_num); + epid_done = 1; + continue; + } + + /* This urb has been sent. */ + isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n", + (unsigned int)urb, urb_priv->urb_num); + + /* Set ok on transfered packets for this URB and finish it */ + for (i = 0; i < urb->number_of_packets; i++) { + packet = &urb->iso_frame_desc[i]; + packet->status = 0; + packet->actual_length = packet->length; + } + urb_priv->isoc_packet_counter = urb->number_of_packets; + tc_finish_urb(comp_data->hcd, urb, 0); + + } /* END: while(!epid_done) */ + } /* END: for(epid...) */ + + local_irq_restore(flags); + kmem_cache_free(isoc_compl_cache, comp_data); +} + + +static void check_finished_intr_tx_epids(struct usb_hcd *hcd) { + unsigned long flags; + int epid; + struct urb *urb; + struct crisv10_urb_priv * urb_priv; + volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ + volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ + + /* Protect TxintrEPList */ + local_irq_save(flags); + + for (epid = 0; epid < NBR_OF_EPIDS; epid++) { + if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) { + /* Nothing to see on this epid. Only check valid Out Intr epids */ + continue; + } + + urb = activeUrbList[epid]; + if(urb == 0) { + intr_warn("Found Out Intr epid:%d with no active URB\n", epid); + continue; + } + + /* Sanity check. */ + ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT); + ASSERT(usb_pipeout(urb->pipe)); + + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + + /* Go through EPs between first and second sof-EP. It's here Out Intr EPs + are inserted.*/ + curr_ep = &TxIntrEPList[0]; + do { + next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); + if(next_ep == urb_priv->intr_ep_pool[0]) { + /* We found the Out Intr EP for this epid */ + + /* Disable it so it doesn't get processed again */ + next_ep->command &= ~IO_MASK(USB_EP_command, enable); + + /* Finish the active Out Intr URB with status OK */ + tc_finish_urb(hcd, urb, 0); + } + curr_ep = phys_to_virt(curr_ep->next); + } while (curr_ep != &TxIntrEPList[1]); + + } + local_irq_restore(flags); +} + +/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */ +static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) { + struct usb_hcd *hcd = (struct usb_hcd*)vhc; + ASSERT(hcd); + + if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { + /* Clear this interrupt */ + *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); + restart_dma8_sub0(); + } + + if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { + /* Clear this interrupt */ + *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); + check_finished_ctrl_tx_epids(hcd); + } + + if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { + /* Clear this interrupt */ + *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); + check_finished_intr_tx_epids(hcd); + } + + if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { + struct crisv10_isoc_complete_data* comp_data; + + /* Flag done Out Isoc for later completion */ + check_finished_isoc_tx_epids(); + + /* Clear this interrupt */ + *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); + /* Schedule bottom half of Out Isoc completion function. This function + finishes the URBs marked with isoc_out_done */ + comp_data = (struct crisv10_isoc_complete_data*) + kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC); + ASSERT(comp_data != NULL); + comp_data ->hcd = hcd; + + INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half); + schedule_work(&comp_data->usb_bh); + } + + return IRQ_HANDLED; +} + +/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */ +static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) { + unsigned long flags; + struct urb *urb; + struct usb_hcd *hcd = (struct usb_hcd*)vhc; + struct crisv10_urb_priv *urb_priv; + int epid = 0; + int real_error; + + ASSERT(hcd); + + /* Clear this interrupt. */ + *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); + + /* Custom clear interrupt for this interrupt */ + /* The reason we cli here is that we call the driver's callback functions. */ + local_irq_save(flags); + + /* Note that this while loop assumes that all packets span only + one rx descriptor. */ + while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { + epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); + /* Get the active URB for this epid */ + urb = activeUrbList[epid]; + + ASSERT(epid_inuse(epid)); + if (!urb) { + dma_err("No urb for epid %d in rx interrupt\n", epid); + goto skip_out; + } + + /* Check if any errors on epid */ + real_error = 0; + if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { + __u32 r_usb_ept_data; + + if (usb_pipeisoc(urb->pipe)) { + r_usb_ept_data = etrax_epid_iso_get(epid); + if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && + (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && + (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { + /* Not an error, just a failure to receive an expected iso + in packet in this frame. This is not documented + in the designers reference. Continue processing. + */ + } else real_error = 1; + } else real_error = 1; + } + + if(real_error) { + dma_err("Error in RX descr on epid:%d for URB 0x%x", + epid, (unsigned int)urb); + dump_ept_data(epid); + dump_in_desc(myNextRxDesc); + goto skip_out; + } + + urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; + ASSERT(urb_priv); + ASSERT(urb_priv->urb_state == STARTED || + urb_priv->urb_state == UNLINK); + + if ((usb_pipetype(urb->pipe) == PIPE_BULK) || + (usb_pipetype(urb->pipe) == PIPE_CONTROL) || + (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { + + /* We get nodata for empty data transactions, and the rx descriptor's + hw_len field is not valid in that case. No data to copy in other + words. */ + if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { + /* No data to copy */ + } else { + /* + dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n", + (unsigned int)urb, epid, myNextRxDesc->hw_len, + urb_priv->rx_offset); + */ + /* Only copy data if URB isn't flaged to be unlinked*/ + if(urb_priv->urb_state != UNLINK) { + /* Make sure the data fits in the buffer. */ + if(urb_priv->rx_offset + myNextRxDesc->hw_len + <= urb->transfer_buffer_length) { + + /* Copy the data to URBs buffer */ + memcpy(urb->transfer_buffer + urb_priv->rx_offset, + phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); + urb_priv->rx_offset += myNextRxDesc->hw_len; + } else { + /* Signal overflow when returning URB */ + urb->status = -EOVERFLOW; + tc_finish_urb_later(hcd, urb, urb->status); + } + } + } + + /* Check if it was the last packet in the transfer */ + if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { + /* Special handling for In Ctrl URBs. */ + if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) && + !(urb_priv->ctrl_zout_done)) { + /* Flag that RX part of Ctrl transfer is done. Because zout descr + interrupt hasn't happend yet will the URB be finished in the + TX-Interrupt. */ + urb_priv->ctrl_rx_done = 1; + tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting" + " for zout\n", (unsigned int)urb); + } else { + tc_finish_urb(hcd, urb, 0); + } + } + } else { /* ISOC RX */ + /* + isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n", + epid, (unsigned int)urb); + */ + + struct usb_iso_packet_descriptor *packet; + + if (urb_priv->urb_state == UNLINK) { + isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n"); + goto skip_out; + } else if (urb_priv->urb_state == NOT_STARTED) { + isoc_err("What? Got Rx data for Isoc urb that isn't started?\n"); + goto skip_out; + } + + packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; + ASSERT(packet); + packet->status = 0; + + if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { + /* We get nodata for empty data transactions, and the rx descriptor's + hw_len field is not valid in that case. We copy 0 bytes however to + stay in synch. */ + packet->actual_length = 0; + } else { + packet->actual_length = myNextRxDesc->hw_len; + /* Make sure the data fits in the buffer. */ + ASSERT(packet->actual_length <= packet->length); + memcpy(urb->transfer_buffer + packet->offset, + phys_to_virt(myNextRxDesc->buf), packet->actual_length); + if(packet->actual_length > 0) + isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n", + packet->actual_length, urb_priv->isoc_packet_counter, + (unsigned int)urb, urb_priv->urb_num); + } + + /* Increment the packet counter. */ + urb_priv->isoc_packet_counter++; + + /* Note that we don't care about the eot field in the rx descriptor's + status. It will always be set for isoc traffic. */ + if (urb->number_of_packets == urb_priv->isoc_packet_counter) { + /* Complete the urb with status OK. */ + tc_finish_urb(hcd, urb, 0); + } + } + + skip_out: + myNextRxDesc->status = 0; + myNextRxDesc->command |= IO_MASK(USB_IN_command, eol); + myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); + myLastRxDesc = myNextRxDesc; + myNextRxDesc = phys_to_virt(myNextRxDesc->next); + flush_etrax_cache(); + *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart); + } + + local_irq_restore(flags); + + return IRQ_HANDLED; +} + +static void tc_bulk_start_timer_func(unsigned long dummy) { + /* We might enable an EP descriptor behind the current DMA position when + it's about to decide that there are no more bulk traffic and it should + stop the bulk channel. + Therefore we periodically check if the bulk channel is stopped and there + is an enabled bulk EP descriptor, in which case we start the bulk + channel. */ + + if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { + int epid; + + timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n"); + + for (epid = 0; epid < NBR_OF_EPIDS; epid++) { + if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { + timer_warn("Found enabled EP for epid %d, starting bulk channel.\n", + epid); + restart_dma8_sub0(); + + /* Restart the bulk eot timer since we just started the bulk channel.*/ + mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); + + /* No need to search any further. */ + break; + } + } + } else { + timer_dbg("bulk_start_timer: Bulk DMA channel running.\n"); + } +} + +static void tc_bulk_eot_timer_func(unsigned long dummy) { + struct usb_hcd *hcd = (struct usb_hcd*)dummy; + ASSERT(hcd); + /* Because of a race condition in the top half, we might miss a bulk eot. + This timer "simulates" a bulk eot if we don't get one for a while, + hopefully correcting the situation. */ + timer_dbg("bulk_eot_timer timed out.\n"); + check_finished_bulk_tx_epids(hcd, 1); +} + + +/*************************************************************/ +/*************************************************************/ +/* Device driver block */ +/*************************************************************/ +/*************************************************************/ + +/* Forward declarations for device driver functions */ +static int devdrv_hcd_probe(struct device *); +static int devdrv_hcd_remove(struct device *); +#ifdef CONFIG_PM +static int devdrv_hcd_suspend(struct device *, u32, u32); +static int devdrv_hcd_resume(struct device *, u32); +#endif /* CONFIG_PM */ + +/* the device */ +static struct platform_device *devdrv_hc_platform_device; + +/* device driver interface */ +static struct device_driver devdrv_hc_device_driver = { + .name = (char *) hc_name, + .bus = &platform_bus_type, + + .probe = devdrv_hcd_probe, + .remove = devdrv_hcd_remove, + +#ifdef CONFIG_PM + .suspend = devdrv_hcd_suspend, + .resume = devdrv_hcd_resume, +#endif /* CONFIG_PM */ +}; + +/* initialize the host controller and driver */ +static int __init_or_module devdrv_hcd_probe(struct device *dev) +{ + struct usb_hcd *hcd; + struct crisv10_hcd *crisv10_hcd; + int retval; + + /* Check DMA burst length */ + if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) != + IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) { + devdrv_err("Invalid DMA burst length in Etrax 100LX," + " needs to be 32\n"); + return -EPERM; + } + + hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id); + if (!hcd) + return -ENOMEM; + + crisv10_hcd = hcd_to_crisv10_hcd(hcd); + spin_lock_init(&crisv10_hcd->lock); + crisv10_hcd->num_ports = num_ports(); + crisv10_hcd->running = 0; + + dev_set_drvdata(dev, crisv10_hcd); + + devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ, + ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ); + + /* Print out chip version read from registers */ + int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major); + int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor); + if(rev_min == 0) { + devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj); + } else { + devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min); + } + + devdrv_info("Bulk timer interval, start:%d eot:%d\n", + BULK_START_TIMER_INTERVAL, + BULK_EOT_TIMER_INTERVAL); + + + /* Init root hub data structures */ + if(rh_init()) { + devdrv_err("Failed init data for Root Hub\n"); + retval = -ENOMEM; + } + + if(port_in_use(0)) { + if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) { + printk(KERN_CRIT "usb-host: request IO interface usb1 failed"); + retval = -EBUSY; + goto out; + } + devdrv_info("Claimed interface for USB physical port 1\n"); + } + if(port_in_use(1)) { + if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) { + /* Free first interface if second failed to be claimed */ + if(port_in_use(0)) { + cris_free_io_interface(if_usb_1); + } + printk(KERN_CRIT "usb-host: request IO interface usb2 failed"); + retval = -EBUSY; + goto out; + } + devdrv_info("Claimed interface for USB physical port 2\n"); + } + + /* Init transfer controller structs and locks */ + if((retval = tc_init(hcd)) != 0) { + goto out; + } + + /* Attach interrupt functions for DMA and init DMA controller */ + if((retval = tc_dma_init(hcd)) != 0) { + goto out; + } + + /* Attach the top IRQ handler for USB controller interrupts */ + if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0, + "ETRAX 100LX built-in USB (HC)", hcd)) { + err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); + retval = -EBUSY; + goto out; + } + + /* iso_eof is only enabled when isoc traffic is running. */ + *R_USB_IRQ_MASK_SET = + /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */ + IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | + IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | + IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | + IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); + + + crisv10_ready_wait(); + /* Reset the USB interface. */ + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); + + /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to + 0x2A30 (10800), to guarantee that control traffic gets 10% of the + bandwidth, and periodic transfer may allocate the rest (90%). + This doesn't work though. + The value 11960 is chosen to be just after the SOF token, with a couple + of bit times extra for possible bit stuffing. */ + *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); + + crisv10_ready_wait(); + /* Configure the USB interface as a host controller. */ + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); + + + /* Check so controller not busy before enabling ports */ + crisv10_ready_wait(); + + /* Enable selected USB ports */ + if(port_in_use(0)) { + *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); + } else { + *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); + } + if(port_in_use(1)) { + *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); + } else { + *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); + } + + crisv10_ready_wait(); + /* Start processing of USB traffic. */ + *R_USB_COMMAND = + IO_STATE(R_USB_COMMAND, port_sel, nop) | + IO_STATE(R_USB_COMMAND, port_cmd, reset) | + IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); + + /* Do not continue probing initialization before USB interface is done */ + crisv10_ready_wait(); + + /* Register our Host Controller to USB Core + * Finish the remaining parts of generic HCD initialization: allocate the + * buffers of consistent memory, register the bus + * and call the driver's reset() and start() routines. */ + retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED); + if (retval != 0) { + devdrv_err("Failed registering HCD driver\n"); + goto out; + } + + return 0; + + out: + devdrv_hcd_remove(dev); + return retval; +} + + +/* cleanup after the host controller and driver */ +static int __init_or_module devdrv_hcd_remove(struct device *dev) +{ + struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev); + struct usb_hcd *hcd; + + if (!crisv10_hcd) + return 0; + hcd = crisv10_hcd_to_hcd(crisv10_hcd); + + + /* Stop USB Controller in Etrax 100LX */ + crisv10_hcd_reset(hcd); + + usb_remove_hcd(hcd); + devdrv_dbg("Removed HCD from USB Core\n"); + + /* Free USB Controller IRQ */ + free_irq(ETRAX_USB_HC_IRQ, NULL); + + /* Free resources */ + tc_dma_destroy(); + tc_destroy(); + + + if(port_in_use(0)) { + cris_free_io_interface(if_usb_1); + } + if(port_in_use(1)) { + cris_free_io_interface(if_usb_2); + } + + devdrv_dbg("Freed all claimed resources\n"); + + return 0; +} + + +#ifdef CONFIG_PM + +static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level) +{ + return 0; /* no-op for now */ +} + +static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level) +{ + return 0; /* no-op for now */ +} + +#endif /* CONFIG_PM */ + + +/*************************************************************/ +/*************************************************************/ +/* Module block */ +/*************************************************************/ +/*************************************************************/ + +/* register driver */ +static int __init module_hcd_init(void) +{ + + if (usb_disabled()) + return -ENODEV; + + /* Here we select enabled ports by following defines created from + menuconfig */ +#ifndef CONFIG_ETRAX_USB_HOST_PORT1 + ports &= ~(1<<0); +#endif +#ifndef CONFIG_ETRAX_USB_HOST_PORT2 + ports &= ~(1<<1); +#endif + + printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc); + + devdrv_hc_platform_device = + platform_device_register_simple((char *) hc_name, 0, NULL, 0); + + if (IS_ERR(devdrv_hc_platform_device)) + return PTR_ERR(devdrv_hc_platform_device); + return driver_register(&devdrv_hc_device_driver); + /* + * Note that we do not set the DMA mask for the device, + * i.e. we pretend that we will use PIO, since no specific + * allocation routines are needed for DMA buffers. This will + * cause the HCD buffer allocation routines to fall back to + * kmalloc(). + */ +} + +/* unregister driver */ +static void __exit module_hcd_exit(void) +{ + driver_unregister(&devdrv_hc_device_driver); +} + + +/* Module hooks */ +module_init(module_hcd_init); +module_exit(module_hcd_exit); diff --git a/target/linux/etrax/files/drivers/usb/host/hc_crisv10.h b/target/linux/etrax/files/drivers/usb/host/hc-crisv10.h similarity index 50% rename from target/linux/etrax/files/drivers/usb/host/hc_crisv10.h rename to target/linux/etrax/files/drivers/usb/host/hc-crisv10.h index 62f77111d4..58a0b6238b 100644 --- a/target/linux/etrax/files/drivers/usb/host/hc_crisv10.h +++ b/target/linux/etrax/files/drivers/usb/host/hc-crisv10.h @@ -4,131 +4,175 @@ #include #include -typedef struct USB_IN_Desc { - volatile __u16 sw_len; - volatile __u16 command; - volatile unsigned long next; - volatile unsigned long buf; - volatile __u16 hw_len; - volatile __u16 status; -} USB_IN_Desc_t; - -typedef struct USB_SB_Desc { - volatile __u16 sw_len; - volatile __u16 command; - volatile unsigned long next; - volatile unsigned long buf; - __u32 dummy; -} USB_SB_Desc_t; - -typedef struct USB_EP_Desc { - volatile __u16 hw_len; - volatile __u16 command; - volatile unsigned long sub; - volatile unsigned long next; - __u32 dummy; -} USB_EP_Desc_t; - -struct virt_root_hub { - int devnum; - void *urb; - void *int_addr; - int send; - int interval; - int numports; - struct timer_list rh_int_timer; - volatile __u16 wPortChange_1; - volatile __u16 wPortChange_2; - volatile __u16 prev_wPortStatus_1; - volatile __u16 prev_wPortStatus_2; +struct USB_IN_Desc { + volatile __u16 sw_len; + volatile __u16 command; + volatile unsigned long next; + volatile unsigned long buf; + volatile __u16 hw_len; + volatile __u16 status; }; -struct etrax_usb_intr_traffic { - int sleeping; - int error; - struct wait_queue *wq; +struct USB_SB_Desc { + volatile __u16 sw_len; + volatile __u16 command; + volatile unsigned long next; + volatile unsigned long buf; +}; + +struct USB_EP_Desc { + volatile __u16 hw_len; + volatile __u16 command; + volatile unsigned long sub; + volatile unsigned long next; +}; + + +/* Root Hub port status struct */ +struct crisv10_rh { + volatile __u16 wPortChange[2]; + volatile __u16 wPortStatusPrev[2]; +}; + +/* HCD description */ +struct crisv10_hcd { + spinlock_t lock; + __u8 num_ports; + __u8 running; +}; + + +/* Endpoint HC private data description */ +struct crisv10_ep_priv { + int epid; +}; + +/* Additional software state info for a USB Controller epid */ +struct etrax_epid { + __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */ + __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */ + __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */ + __u8 out_traffic; /* !0 = This epid is for out traffic */ +}; + +/* Struct to hold information of scheduled later URB completion */ +struct urb_later_data { + struct delayed_work dws; + struct usb_hcd *hcd; + struct urb *urb; + int urb_num; + int status; }; -typedef struct etrax_usb_hc { - struct usb_bus *bus; - struct virt_root_hub rh; - struct etrax_usb_intr_traffic intr; -} etrax_hc_t; typedef enum { - STARTED, - NOT_STARTED, - UNLINK, - TRANSFER_DONE, - WAITING_FOR_DESCR_INTR -} etrax_usb_urb_state_t; - - - -typedef struct etrax_usb_urb_priv { - /* The first_sb field is used for freeing all SB descriptors belonging - to an urb. The corresponding ep descriptor's sub pointer cannot be - used for this since the DMA advances the sub pointer as it processes - the sb list. */ - USB_SB_Desc_t *first_sb; - /* The last_sb field referes to the last SB descriptor that belongs to - this urb. This is important to know so we can free the SB descriptors - that ranges between first_sb and last_sb. */ - USB_SB_Desc_t *last_sb; - - /* The rx_offset field is used in ctrl and bulk traffic to keep track - of the offset in the urb's transfer_buffer where incoming data should be - copied to. */ - __u32 rx_offset; - - /* Counter used in isochronous transfers to keep track of the - number of packets received/transmitted. */ - __u32 isoc_packet_counter; - - /* This field is used to pass information about the urb's current state between - the various interrupt handlers (thus marked volatile). */ - volatile etrax_usb_urb_state_t urb_state; - - /* Connection between the submitted urb and ETRAX epid number */ - __u8 epid; - - /* The rx_data_list field is used for periodic traffic, to hold - received data for later processing in the the complete_urb functions, - where the data us copied to the urb's transfer_buffer. Basically, we - use this intermediate storage because we don't know when it's safe to - reuse the transfer_buffer (FIXME?). */ - struct list_head rx_data_list; -} etrax_urb_priv_t; - -/* This struct is for passing data from the top half to the bottom half. */ -typedef struct usb_interrupt_registers -{ - etrax_hc_t *hc; - __u32 r_usb_epid_attn; - __u8 r_usb_status; - __u16 r_usb_rh_port_status_1; - __u16 r_usb_rh_port_status_2; - __u32 r_usb_irq_mask_read; - __u32 r_usb_fm_number; - struct work_struct usb_bh; -} usb_interrupt_registers_t; - -/* This struct is for passing data from the isoc top half to the isoc bottom half. */ -typedef struct usb_isoc_complete_data -{ - struct urb *urb; - struct work_struct usb_bh; -} usb_isoc_complete_data_t; + STARTED, + NOT_STARTED, + UNLINK, +} crisv10_urb_state_t; + + +struct crisv10_urb_priv { + /* Sequence number for this URB. Every new submited URB gets this from + a incrementing counter. Used when a URB is scheduled for later finish to + be sure that the intended URB hasn't already been completed (device + drivers has a tendency to reuse URBs once they are completed, causing us + to not be able to single old ones out only based on the URB pointer.) */ + __u32 urb_num; + + /* The first_sb field is used for freeing all SB descriptors belonging + to an urb. The corresponding ep descriptor's sub pointer cannot be + used for this since the DMA advances the sub pointer as it processes + the sb list. */ + struct USB_SB_Desc *first_sb; + + /* The last_sb field referes to the last SB descriptor that belongs to + this urb. This is important to know so we can free the SB descriptors + that ranges between first_sb and last_sb. */ + struct USB_SB_Desc *last_sb; + + /* The rx_offset field is used in ctrl and bulk traffic to keep track + of the offset in the urb's transfer_buffer where incoming data should be + copied to. */ + __u32 rx_offset; + + /* Counter used in isochronous transfers to keep track of the + number of packets received/transmitted. */ + __u32 isoc_packet_counter; + + /* Flag that marks if this Isoc Out URB has finished it's transfer. Used + because several URBs can be finished before list is processed */ + __u8 isoc_out_done; + + /* This field is used to pass information about the urb's current state + between the various interrupt handlers (thus marked volatile). */ + volatile crisv10_urb_state_t urb_state; + + /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT. + When DMA8 sub-channel 2 has processed the SB list for this sequence we + get a interrupt. We also get a interrupt for In transfers and which + one of these interrupts that comes first depends of data size and device. + To be sure that we have got both interrupts before we complete the URB + we have these to flags that shows which part that has completed. + We can then check when we get one of the interrupts that if the other has + occured it's safe for us to complete the URB, otherwise we set appropriate + flag and do the completion when we get the other interrupt. */ + volatile unsigned char ctrl_zout_done; + volatile unsigned char ctrl_rx_done; + + /* Connection between the submitted urb and ETRAX epid number */ + __u8 epid; + + /* The rx_data_list field is used for periodic traffic, to hold + received data for later processing in the the complete_urb functions, + where the data us copied to the urb's transfer_buffer. Basically, we + use this intermediate storage because we don't know when it's safe to + reuse the transfer_buffer (FIXME?). */ + struct list_head rx_data_list; + + + /* The interval time rounded up to closest 2^N */ + int interval; + + /* Pool of EP descriptors needed if it's a INTR transfer. + Amount of EPs in pool correspons to how many INTR that should + be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */ + struct USB_EP_Desc* intr_ep_pool[128]; + + /* The mount of EPs allocated for this INTR URB */ + int intr_ep_pool_length; + + /* Pointer to info struct if URB is scheduled to be finished later */ + struct urb_later_data* later_data; + + /* Allocated bandwidth for isochronous and interrupt traffic */ + int bandwidth; +}; -/* This struct holds data we get from the rx descriptors for DMA channel 9 - for periodic traffic (intr and isoc). */ -typedef struct rx_data -{ - void *data; - int length; - struct list_head list; -} rx_data_t; +/* This struct is for passing data from the top half to the bottom half irq + handlers */ +struct crisv10_irq_reg { + struct usb_hcd* hcd; + __u32 r_usb_epid_attn; + __u8 r_usb_status; + __u16 r_usb_rh_port_status_1; + __u16 r_usb_rh_port_status_2; + __u32 r_usb_irq_mask_read; + __u32 r_usb_fm_number; + struct work_struct usb_bh; +}; + + +/* This struct is for passing data from the isoc top half to the isoc bottom + half. */ +struct crisv10_isoc_complete_data { + struct usb_hcd *hcd; + struct urb *urb; + struct work_struct usb_bh; +}; + +/* Entry item for URB lists for each endpint */ typedef struct urb_entry { struct urb *urb; diff --git a/target/linux/etrax/files/drivers/usb/host/hc_crisv10.c b/target/linux/etrax/files/drivers/usb/host/hc_crisv10.c deleted file mode 100644 index 32f7caf247..0000000000 --- a/target/linux/etrax/files/drivers/usb/host/hc_crisv10.c +++ /dev/null @@ -1,4550 +0,0 @@ -/* - * usb-host.c: ETRAX 100LX USB Host Controller Driver (HCD) - * - * Copyright (c) 2002, 2003 Axis Communications AB. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include -/* Ugly include because we don't live with the other host drivers. */ -#include <../drivers/usb/core/hcd.h> -#include <../drivers/usb/core/usb.h> - -#include "hc_crisv10.h" - -#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR -#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR -#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR - -static const char *usb_hcd_version = "$Revision: 1.2 $"; - -#undef KERN_DEBUG -#define KERN_DEBUG "" - - -#undef USB_DEBUG_RH -#undef USB_DEBUG_EPID -#undef USB_DEBUG_SB -#undef USB_DEBUG_DESC -#undef USB_DEBUG_URB -#undef USB_DEBUG_TRACE -#undef USB_DEBUG_BULK -#undef USB_DEBUG_CTRL -#undef USB_DEBUG_INTR -#undef USB_DEBUG_ISOC - -#ifdef USB_DEBUG_RH -#define dbg_rh(format, arg...) printk(KERN_DEBUG __FILE__ ": (RH) " format "\n" , ## arg) -#else -#define dbg_rh(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_EPID -#define dbg_epid(format, arg...) printk(KERN_DEBUG __FILE__ ": (EPID) " format "\n" , ## arg) -#else -#define dbg_epid(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_SB -#define dbg_sb(format, arg...) printk(KERN_DEBUG __FILE__ ": (SB) " format "\n" , ## arg) -#else -#define dbg_sb(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_CTRL -#define dbg_ctrl(format, arg...) printk(KERN_DEBUG __FILE__ ": (CTRL) " format "\n" , ## arg) -#else -#define dbg_ctrl(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_BULK -#define dbg_bulk(format, arg...) printk(KERN_DEBUG __FILE__ ": (BULK) " format "\n" , ## arg) -#else -#define dbg_bulk(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_INTR -#define dbg_intr(format, arg...) printk(KERN_DEBUG __FILE__ ": (INTR) " format "\n" , ## arg) -#else -#define dbg_intr(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_ISOC -#define dbg_isoc(format, arg...) printk(KERN_DEBUG __FILE__ ": (ISOC) " format "\n" , ## arg) -#else -#define dbg_isoc(format, arg...) do {} while (0) -#endif - -#ifdef USB_DEBUG_TRACE -#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) -#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) -#else -#define DBFENTER do {} while (0) -#define DBFEXIT do {} while (0) -#endif - -#define usb_pipeslow(pipe) (((pipe) >> 26) & 1) - -/*------------------------------------------------------------------- - Virtual Root Hub - -------------------------------------------------------------------*/ - -static __u8 root_hub_dev_des[] = -{ - 0x12, /* __u8 bLength; */ - 0x01, /* __u8 bDescriptorType; Device */ - 0x00, /* __le16 bcdUSB; v1.0 */ - 0x01, - 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */ - 0x00, /* __u8 bDeviceSubClass; */ - 0x00, /* __u8 bDeviceProtocol; */ - 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */ - 0x00, /* __le16 idVendor; */ - 0x00, - 0x00, /* __le16 idProduct; */ - 0x00, - 0x00, /* __le16 bcdDevice; */ - 0x00, - 0x00, /* __u8 iManufacturer; */ - 0x02, /* __u8 iProduct; */ - 0x01, /* __u8 iSerialNumber; */ - 0x01 /* __u8 bNumConfigurations; */ -}; - -/* Configuration descriptor */ -static __u8 root_hub_config_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x02, /* __u8 bDescriptorType; Configuration */ - 0x19, /* __le16 wTotalLength; */ - 0x00, - 0x01, /* __u8 bNumInterfaces; */ - 0x01, /* __u8 bConfigurationValue; */ - 0x00, /* __u8 iConfiguration; */ - 0x40, /* __u8 bmAttributes; Bit 7: Bus-powered */ - 0x00, /* __u8 MaxPower; */ - - /* interface */ - 0x09, /* __u8 if_bLength; */ - 0x04, /* __u8 if_bDescriptorType; Interface */ - 0x00, /* __u8 if_bInterfaceNumber; */ - 0x00, /* __u8 if_bAlternateSetting; */ - 0x01, /* __u8 if_bNumEndpoints; */ - 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */ - 0x00, /* __u8 if_bInterfaceSubClass; */ - 0x00, /* __u8 if_bInterfaceProtocol; */ - 0x00, /* __u8 if_iInterface; */ - - /* endpoint */ - 0x07, /* __u8 ep_bLength; */ - 0x05, /* __u8 ep_bDescriptorType; Endpoint */ - 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */ - 0x03, /* __u8 ep_bmAttributes; Interrupt */ - 0x08, /* __le16 ep_wMaxPacketSize; 8 Bytes */ - 0x00, - 0xff /* __u8 ep_bInterval; 255 ms */ -}; - -static __u8 root_hub_hub_des[] = -{ - 0x09, /* __u8 bLength; */ - 0x29, /* __u8 bDescriptorType; Hub-descriptor */ - 0x02, /* __u8 bNbrPorts; */ - 0x00, /* __u16 wHubCharacteristics; */ - 0x00, - 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ - 0x00, /* __u8 bHubContrCurrent; 0 mA */ - 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ - 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ -}; - -static DEFINE_TIMER(bulk_start_timer, NULL, 0, 0); -static DEFINE_TIMER(bulk_eot_timer, NULL, 0, 0); - -/* We want the start timer to expire before the eot timer, because the former might start - traffic, thus making it unnecessary for the latter to time out. */ -#define BULK_START_TIMER_INTERVAL (HZ/10) /* 100 ms */ -#define BULK_EOT_TIMER_INTERVAL (HZ/10+2) /* 120 ms */ - -#define OK(x) len = (x); dbg_rh("OK(%d): line: %d", x, __LINE__); break -#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ -{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} - -#define SLAB_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) -#define KMALLOC_FLAG (in_interrupt() ? GFP_ATOMIC : GFP_KERNEL) - -/* Most helpful debugging aid */ -#define assert(expr) ((void) ((expr) ? 0 : (err("assert failed at line %d",__LINE__)))) - -/* Alternative assert define which stops after a failed assert. */ -/* -#define assert(expr) \ -{ \ - if (!(expr)) { \ - err("assert failed at line %d",__LINE__); \ - while (1); \ - } \ -} -*/ - - -/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it dynamically? - To adjust it dynamically we would have to get an interrupt when we reach the end - of the rx descriptor list, or when we get close to the end, and then allocate more - descriptors. */ - -#define NBR_OF_RX_DESC 512 -#define RX_DESC_BUF_SIZE 1024 -#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) - -/* The number of epids is, among other things, used for pre-allocating - ctrl, bulk and isoc EP descriptors (one for each epid). - Assumed to be > 1 when initiating the DMA lists. */ -#define NBR_OF_EPIDS 32 - -/* Support interrupt traffic intervals up to 128 ms. */ -#define MAX_INTR_INTERVAL 128 - -/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP table - must be "invalid". By this we mean that we shouldn't care about epid attentions - for this epid, or at least handle them differently from epid attentions for "valid" - epids. This define determines which one to use (don't change it). */ -#define INVALID_EPID 31 -/* A special epid for the bulk dummys. */ -#define DUMMY_EPID 30 - -/* This is just a software cache for the valid entries in R_USB_EPT_DATA. */ -static __u32 epid_usage_bitmask; - -/* A bitfield to keep information on in/out traffic is needed to uniquely identify - an endpoint on a device, since the most significant bit which indicates traffic - direction is lacking in the ep_id field (ETRAX epids can handle both in and - out traffic on endpoints that are otherwise identical). The USB framework, however, - relies on them to be handled separately. For example, bulk IN and OUT urbs cannot - be queued in the same list, since they would block each other. */ -static __u32 epid_out_traffic; - -/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. - Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be cache aligned. */ -static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); -static volatile USB_IN_Desc_t RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); - -/* Pointers into RxDescList. */ -static volatile USB_IN_Desc_t *myNextRxDesc; -static volatile USB_IN_Desc_t *myLastRxDesc; -static volatile USB_IN_Desc_t *myPrevRxDesc; - -/* EP descriptors must be 32-bit aligned. */ -static volatile USB_EP_Desc_t TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -static volatile USB_EP_Desc_t TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -/* After each enabled bulk EP (IN or OUT) we put two disabled EP descriptors with the eol flag set, - causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which - gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the - EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors - in each frame. */ -static volatile USB_EP_Desc_t TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); - -static volatile USB_EP_Desc_t TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -static volatile USB_SB_Desc_t TxIsocSB_zout __attribute__ ((aligned (4))); - -static volatile USB_EP_Desc_t TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); -static volatile USB_SB_Desc_t TxIntrSB_zout __attribute__ ((aligned (4))); - -/* A zout transfer makes a memory access at the address of its buf pointer, which means that setting - this buf pointer to 0 will cause an access to the flash. In addition to this, setting sw_len to 0 - results in a 16/32 bytes (depending on DMA burst size) transfer. Instead, we set it to 1, and point - it to this buffer. */ -static int zout_buffer[4] __attribute__ ((aligned (4))); - -/* Cache for allocating new EP and SB descriptors. */ -static struct kmem_cache *usb_desc_cache; - -/* Cache for the registers allocated in the top half. */ -static struct kmem_cache *top_half_reg_cache; - -/* Cache for the data allocated in the isoc descr top half. */ -static struct kmem_cache *isoc_compl_cache; - -static struct usb_bus *etrax_usb_bus; - -/* This is a circular (double-linked) list of the active urbs for each epid. - The head is never removed, and new urbs are linked onto the list as - urb_entry_t elements. Don't reference urb_list directly; use the wrapper - functions instead. Note that working with these lists might require spinlock - protection. */ -static struct list_head urb_list[NBR_OF_EPIDS]; - -/* Read about the need and usage of this lock in submit_ctrl_urb. */ -static spinlock_t urb_list_lock; - -/* Used when unlinking asynchronously. */ -static struct list_head urb_unlink_list; - -/* for returning string descriptors in UTF-16LE */ -static int ascii2utf (char *ascii, __u8 *utf, int utfmax) -{ - int retval; - - for (retval = 0; *ascii && utfmax > 1; utfmax -= 2, retval += 2) { - *utf++ = *ascii++ & 0x7f; - *utf++ = 0; - } - return retval; -} - -static int usb_root_hub_string (int id, int serial, char *type, __u8 *data, int len) -{ - char buf [30]; - - // assert (len > (2 * (sizeof (buf) + 1))); - // assert (strlen (type) <= 8); - - // language ids - if (id == 0) { - *data++ = 4; *data++ = 3; /* 4 bytes data */ - *data++ = 0; *data++ = 0; /* some language id */ - return 4; - - // serial number - } else if (id == 1) { - sprintf (buf, "%x", serial); - - // product description - } else if (id == 2) { - sprintf (buf, "USB %s Root Hub", type); - - // id 3 == vendor description - - // unsupported IDs --> "stall" - } else - return 0; - - data [0] = 2 + ascii2utf (buf, data + 2, len - 2); - data [1] = 3; - return data [0]; -} - -/* Wrappers around the list functions (include/linux/list.h). */ - -static inline int urb_list_empty(int epid) -{ - return list_empty(&urb_list[epid]); -} - -/* Returns first urb for this epid, or NULL if list is empty. */ -static inline struct urb *urb_list_first(int epid) -{ - struct urb *first_urb = 0; - - if (!urb_list_empty(epid)) { - /* Get the first urb (i.e. head->next). */ - urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); - first_urb = urb_entry->urb; - } - return first_urb; -} - -/* Adds an urb_entry last in the list for this epid. */ -static inline void urb_list_add(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = kmalloc(sizeof(urb_entry_t), KMALLOC_FLAG); - assert(urb_entry); - - urb_entry->urb = urb; - list_add_tail(&urb_entry->list, &urb_list[epid]); -} - -/* Search through the list for an element that contains this urb. (The list - is expected to be short and the one we are about to delete will often be - the first in the list.) */ -static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) -{ - struct list_head *entry; - struct list_head *tmp; - urb_entry_t *urb_entry; - - list_for_each_safe(entry, tmp, &urb_list[epid]) { - urb_entry = list_entry(entry, urb_entry_t, list); - assert(urb_entry); - assert(urb_entry->urb); - - if (urb_entry->urb == urb) { - return urb_entry; - } - } - return 0; -} - -/* Delete an urb from the list. */ -static inline void urb_list_del(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = __urb_list_entry(urb, epid); - assert(urb_entry); - - /* Delete entry and free. */ - list_del(&urb_entry->list); - kfree(urb_entry); -} - -/* Move an urb to the end of the list. */ -static inline void urb_list_move_last(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = __urb_list_entry(urb, epid); - assert(urb_entry); - - list_move_tail(&urb_entry->list, &urb_list[epid]); -} - -/* Get the next urb in the list. */ -static inline struct urb *urb_list_next(struct urb *urb, int epid) -{ - urb_entry_t *urb_entry = __urb_list_entry(urb, epid); - - assert(urb_entry); - - if (urb_entry->list.next != &urb_list[epid]) { - struct list_head *elem = urb_entry->list.next; - urb_entry = list_entry(elem, urb_entry_t, list); - return urb_entry->urb; - } else { - return NULL; - } -} - - - -/* For debug purposes only. */ -static inline void urb_list_dump(int epid) -{ - struct list_head *entry; - struct list_head *tmp; - urb_entry_t *urb_entry; - int i = 0; - - info("Dumping urb list for epid %d", epid); - - list_for_each_safe(entry, tmp, &urb_list[epid]) { - urb_entry = list_entry(entry, urb_entry_t, list); - info(" entry %d, urb = 0x%lx", i, (unsigned long)urb_entry->urb); - } -} - -static void init_rx_buffers(void); -static int etrax_rh_unlink_urb(struct urb *urb); -static void etrax_rh_send_irq(struct urb *urb); -static void etrax_rh_init_int_timer(struct urb *urb); -static void etrax_rh_int_timer_do(unsigned long ptr); - -static int etrax_usb_setup_epid(struct urb *urb); -static int etrax_usb_lookup_epid(struct urb *urb); -static int etrax_usb_allocate_epid(void); -static void etrax_usb_free_epid(int epid); - -static int etrax_remove_from_sb_list(struct urb *urb); - -static void* etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, - unsigned mem_flags, dma_addr_t *dma); -static void etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma); - -static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid); -static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid); -static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid); -static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid); - -static int etrax_usb_submit_bulk_urb(struct urb *urb); -static int etrax_usb_submit_ctrl_urb(struct urb *urb); -static int etrax_usb_submit_intr_urb(struct urb *urb); -static int etrax_usb_submit_isoc_urb(struct urb *urb); - -static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags); -static int etrax_usb_unlink_urb(struct urb *urb, int status); -static int etrax_usb_get_frame_number(struct usb_device *usb_dev); - -static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc); -static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc); -static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc); -static void etrax_usb_hc_interrupt_bottom_half(void *data); - -static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data); - - -/* The following is a list of interrupt handlers for the host controller interrupts we use. - They are called from etrax_usb_hc_interrupt_bottom_half. */ -static void etrax_usb_hc_isoc_eof_interrupt(void); -static void etrax_usb_hc_bulk_eot_interrupt(int timer_induced); -static void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg); -static void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg); -static void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg); - -static int etrax_rh_submit_urb (struct urb *urb); - -/* Forward declaration needed because they are used in the rx interrupt routine. */ -static void etrax_usb_complete_urb(struct urb *urb, int status); -static void etrax_usb_complete_bulk_urb(struct urb *urb, int status); -static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status); -static void etrax_usb_complete_intr_urb(struct urb *urb, int status); -static void etrax_usb_complete_isoc_urb(struct urb *urb, int status); - -static int etrax_usb_hc_init(void); -static void etrax_usb_hc_cleanup(void); - -static struct usb_operations etrax_usb_device_operations = -{ - .get_frame_number = etrax_usb_get_frame_number, - .submit_urb = etrax_usb_submit_urb, - .unlink_urb = etrax_usb_unlink_urb, - .buffer_alloc = etrax_usb_buffer_alloc, - .buffer_free = etrax_usb_buffer_free -}; - -/* Note that these functions are always available in their "__" variants, for use in - error situations. The "__" missing variants are controlled by the USB_DEBUG_DESC/ - USB_DEBUG_URB macros. */ -static void __dump_urb(struct urb* purb) -{ - printk("\nurb :0x%08lx\n", (unsigned long)purb); - printk("dev :0x%08lx\n", (unsigned long)purb->dev); - printk("pipe :0x%08x\n", purb->pipe); - printk("status :%d\n", purb->status); - printk("transfer_flags :0x%08x\n", purb->transfer_flags); - printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); - printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); - printk("actual_length :%d\n", purb->actual_length); - printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); - printk("start_frame :%d\n", purb->start_frame); - printk("number_of_packets :%d\n", purb->number_of_packets); - printk("interval :%d\n", purb->interval); - printk("error_count :%d\n", purb->error_count); - printk("context :0x%08lx\n", (unsigned long)purb->context); - printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); -} - -static void __dump_in_desc(volatile USB_IN_Desc_t *in) -{ - printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); - printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); - printk(" command : 0x%04x\n", in->command); - printk(" next : 0x%08lx\n", in->next); - printk(" buf : 0x%08lx\n", in->buf); - printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); - printk(" status : 0x%04x\n\n", in->status); -} - -static void __dump_sb_desc(volatile USB_SB_Desc_t *sb) -{ - char tt = (sb->command & 0x30) >> 4; - char *tt_string; - - switch (tt) { - case 0: - tt_string = "zout"; - break; - case 1: - tt_string = "in"; - break; - case 2: - tt_string = "out"; - break; - case 3: - tt_string = "setup"; - break; - default: - tt_string = "unknown (weird)"; - } - - printk("\n USB_SB_Desc at 0x%08lx\n", (unsigned long)sb); - printk(" command : 0x%04x\n", sb->command); - printk(" rem : %d\n", (sb->command & 0x3f00) >> 8); - printk(" full : %d\n", (sb->command & 0x40) >> 6); - printk(" tt : %d (%s)\n", tt, tt_string); - printk(" intr : %d\n", (sb->command & 0x8) >> 3); - printk(" eot : %d\n", (sb->command & 0x2) >> 1); - printk(" eol : %d\n", sb->command & 0x1); - printk(" sw_len : 0x%04x (%d)\n", sb->sw_len, sb->sw_len); - printk(" next : 0x%08lx\n", sb->next); - printk(" buf : 0x%08lx\n\n", sb->buf); -} - - -static void __dump_ep_desc(volatile USB_EP_Desc_t *ep) -{ - printk("\nUSB_EP_Desc at 0x%08lx\n", (unsigned long)ep); - printk(" command : 0x%04x\n", ep->command); - printk(" ep_id : %d\n", (ep->command & 0x1f00) >> 8); - printk(" enable : %d\n", (ep->command & 0x10) >> 4); - printk(" intr : %d\n", (ep->command & 0x8) >> 3); - printk(" eof : %d\n", (ep->command & 0x2) >> 1); - printk(" eol : %d\n", ep->command & 0x1); - printk(" hw_len : 0x%04x (%d)\n", ep->hw_len, ep->hw_len); - printk(" next : 0x%08lx\n", ep->next); - printk(" sub : 0x%08lx\n\n", ep->sub); -} - -static inline void __dump_ep_list(int pipe_type) -{ - volatile USB_EP_Desc_t *ep; - volatile USB_EP_Desc_t *first_ep; - volatile USB_SB_Desc_t *sb; - - switch (pipe_type) - { - case PIPE_BULK: - first_ep = &TxBulkEPList[0]; - break; - case PIPE_CONTROL: - first_ep = &TxCtrlEPList[0]; - break; - case PIPE_INTERRUPT: - first_ep = &TxIntrEPList[0]; - break; - case PIPE_ISOCHRONOUS: - first_ep = &TxIsocEPList[0]; - break; - default: - warn("Cannot dump unknown traffic type"); - return; - } - ep = first_ep; - - printk("\n\nDumping EP list...\n\n"); - - do { - __dump_ep_desc(ep); - /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ - sb = ep->sub ? phys_to_virt(ep->sub) : 0; - while (sb) { - __dump_sb_desc(sb); - sb = sb->next ? phys_to_virt(sb->next) : 0; - } - ep = (volatile USB_EP_Desc_t *)(phys_to_virt(ep->next)); - - } while (ep != first_ep); -} - -static inline void __dump_ept_data(int epid) -{ - unsigned long flags; - __u32 r_usb_ept_data; - - if (epid < 0 || epid > 31) { - printk("Cannot dump ept data for invalid epid %d\n", epid); - return; - } - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - printk("\nR_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); - if (r_usb_ept_data == 0) { - /* No need for more detailed printing. */ - return; - } - printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); - printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); - printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); - printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); - printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); - printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); - printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); - printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); - printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); - printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); - printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); - printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); -} - -static inline void __dump_ept_data_list(void) -{ - int i; - - printk("Dumping the whole R_USB_EPT_DATA list\n"); - - for (i = 0; i < 32; i++) { - __dump_ept_data(i); - } -} -#ifdef USB_DEBUG_DESC -#define dump_in_desc(...) __dump_in_desc(...) -#define dump_sb_desc(...) __dump_sb_desc(...) -#define dump_ep_desc(...) __dump_ep_desc(...) -#else -#define dump_in_desc(...) do {} while (0) -#define dump_sb_desc(...) do {} while (0) -#define dump_ep_desc(...) do {} while (0) -#endif - -#ifdef USB_DEBUG_URB -#define dump_urb(x) __dump_urb(x) -#else -#define dump_urb(x) do {} while (0) -#endif - -static void init_rx_buffers(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { - RxDescList[i].sw_len = RX_DESC_BUF_SIZE; - RxDescList[i].command = 0; - RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); - RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); - RxDescList[i].hw_len = 0; - RxDescList[i].status = 0; - - /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as USB_IN_Desc - for the relevant fields.) */ - prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); - - } - - RxDescList[i].sw_len = RX_DESC_BUF_SIZE; - RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); - RxDescList[i].next = virt_to_phys(&RxDescList[0]); - RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); - RxDescList[i].hw_len = 0; - RxDescList[i].status = 0; - - myNextRxDesc = &RxDescList[0]; - myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - myPrevRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; - - *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); - *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); - - DBFEXIT; -} - -static void init_tx_bulk_ep(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { - CHECK_ALIGN(&TxBulkEPList[i]); - TxBulkEPList[i].hw_len = 0; - TxBulkEPList[i].command = IO_FIELD(USB_EP_command, epid, i); - TxBulkEPList[i].sub = 0; - TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[i + 1]); - - /* Initiate two EPs, disabled and with the eol flag set. No need for any - preserved epid. */ - - /* The first one has the intr flag set so we get an interrupt when the DMA - channel is about to become disabled. */ - CHECK_ALIGN(&TxBulkDummyEPList[i][0]); - TxBulkDummyEPList[i][0].hw_len = 0; - TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | - IO_STATE(USB_EP_command, eol, yes) | - IO_STATE(USB_EP_command, intr, yes)); - TxBulkDummyEPList[i][0].sub = 0; - TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); - - /* The second one. */ - CHECK_ALIGN(&TxBulkDummyEPList[i][1]); - TxBulkDummyEPList[i][1].hw_len = 0; - TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | - IO_STATE(USB_EP_command, eol, yes)); - TxBulkDummyEPList[i][1].sub = 0; - /* The last dummy's next pointer is the same as the current EP's next pointer. */ - TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); - } - - /* Configure the last one. */ - CHECK_ALIGN(&TxBulkEPList[i]); - TxBulkEPList[i].hw_len = 0; - TxBulkEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | - IO_FIELD(USB_EP_command, epid, i)); - TxBulkEPList[i].sub = 0; - TxBulkEPList[i].next = virt_to_phys(&TxBulkEPList[0]); - - /* No need configuring dummy EPs for the last one as it will never be used for - bulk traffic (i == INVALD_EPID at this point). */ - - /* Set up to start on the last EP so we will enable it when inserting traffic - for the first time (imitating the situation where the DMA has stopped - because there was no more traffic). */ - *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); - /* No point in starting the bulk channel yet. - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ - DBFEXIT; -} - -static void init_tx_ctrl_ep(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { - CHECK_ALIGN(&TxCtrlEPList[i]); - TxCtrlEPList[i].hw_len = 0; - TxCtrlEPList[i].command = IO_FIELD(USB_EP_command, epid, i); - TxCtrlEPList[i].sub = 0; - TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[i + 1]); - } - - CHECK_ALIGN(&TxCtrlEPList[i]); - TxCtrlEPList[i].hw_len = 0; - TxCtrlEPList[i].command = (IO_STATE(USB_EP_command, eol, yes) | - IO_FIELD(USB_EP_command, epid, i)); - - TxCtrlEPList[i].sub = 0; - TxCtrlEPList[i].next = virt_to_phys(&TxCtrlEPList[0]); - - *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[0]); - *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); - - DBFEXIT; -} - - -static void init_tx_intr_ep(void) -{ - int i; - - DBFENTER; - - /* Read comment at zout_buffer declaration for an explanation to this. */ - TxIntrSB_zout.sw_len = 1; - TxIntrSB_zout.next = 0; - TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); - TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { - CHECK_ALIGN(&TxIntrEPList[i]); - TxIntrEPList[i].hw_len = 0; - TxIntrEPList[i].command = - (IO_STATE(USB_EP_command, eof, yes) | - IO_STATE(USB_EP_command, enable, yes) | - IO_FIELD(USB_EP_command, epid, INVALID_EPID)); - TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); - TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); - } - - CHECK_ALIGN(&TxIntrEPList[i]); - TxIntrEPList[i].hw_len = 0; - TxIntrEPList[i].command = - (IO_STATE(USB_EP_command, eof, yes) | - IO_STATE(USB_EP_command, eol, yes) | - IO_STATE(USB_EP_command, enable, yes) | - IO_FIELD(USB_EP_command, epid, INVALID_EPID)); - TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); - TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); - - *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); - *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); - DBFEXIT; -} - -static void init_tx_isoc_ep(void) -{ - int i; - - DBFENTER; - - /* Read comment at zout_buffer declaration for an explanation to this. */ - TxIsocSB_zout.sw_len = 1; - TxIsocSB_zout.next = 0; - TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); - TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - /* The last isochronous EP descriptor is a dummy. */ - - for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { - CHECK_ALIGN(&TxIsocEPList[i]); - TxIsocEPList[i].hw_len = 0; - TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); - TxIsocEPList[i].sub = 0; - TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); - } - - CHECK_ALIGN(&TxIsocEPList[i]); - TxIsocEPList[i].hw_len = 0; - - /* Must enable the last EP descr to get eof interrupt. */ - TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | - IO_STATE(USB_EP_command, eof, yes) | - IO_STATE(USB_EP_command, eol, yes) | - IO_FIELD(USB_EP_command, epid, INVALID_EPID)); - TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); - TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); - - *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); - *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); - - DBFEXIT; -} - -static void etrax_usb_unlink_intr_urb(struct urb *urb) -{ - volatile USB_EP_Desc_t *first_ep; /* First EP in the list. */ - volatile USB_EP_Desc_t *curr_ep; /* Current EP, the iterator. */ - volatile USB_EP_Desc_t *next_ep; /* The EP after current. */ - volatile USB_EP_Desc_t *unlink_ep; /* The one we should remove from the list. */ - - int epid; - - /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the List". */ - - DBFENTER; - - epid = ((etrax_urb_priv_t *)urb->hcpriv)->epid; - - first_ep = &TxIntrEPList[0]; - curr_ep = first_ep; - - - /* Note that this loop removes all EP descriptors with this epid. This assumes - that all EP descriptors belong to the one and only urb for this epid. */ - - do { - next_ep = (USB_EP_Desc_t *)phys_to_virt(curr_ep->next); - - if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { - - dbg_intr("Found EP to unlink for epid %d", epid); - - /* This is the one we should unlink. */ - unlink_ep = next_ep; - - /* Actually unlink the EP from the DMA list. */ - curr_ep->next = unlink_ep->next; - - /* Wait until the DMA is no longer at this descriptor. */ - while (*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)); - - /* Now we are free to remove it and its SB descriptor. - Note that it is assumed here that there is only one sb in the - sb list for this ep. */ - kmem_cache_free(usb_desc_cache, phys_to_virt(unlink_ep->sub)); - kmem_cache_free(usb_desc_cache, (USB_EP_Desc_t *)unlink_ep); - } - - curr_ep = phys_to_virt(curr_ep->next); - - } while (curr_ep != first_ep); - urb->hcpriv = NULL; -} - -void etrax_usb_do_intr_recover(int epid) -{ - USB_EP_Desc_t *first_ep, *tmp_ep; - - DBFENTER; - - first_ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB2_EP); - tmp_ep = first_ep; - - /* What this does is simply to walk the list of interrupt - ep descriptors and enable those that are disabled. */ - - do { - if (IO_EXTRACT(USB_EP_command, epid, tmp_ep->command) == epid && - !(tmp_ep->command & IO_MASK(USB_EP_command, enable))) { - tmp_ep->command |= IO_STATE(USB_EP_command, enable, yes); - } - - tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); - - } while (tmp_ep != first_ep); - - - DBFEXIT; -} - -static int etrax_rh_unlink_urb (struct urb *urb) -{ - etrax_hc_t *hc; - - DBFENTER; - - hc = urb->dev->bus->hcpriv; - - if (hc->rh.urb == urb) { - hc->rh.send = 0; - del_timer(&hc->rh.rh_int_timer); - } - - DBFEXIT; - return 0; -} - -static void etrax_rh_send_irq(struct urb *urb) -{ - __u16 data = 0; - etrax_hc_t *hc = urb->dev->bus->hcpriv; - DBFENTER; - -/* - dbg_rh("R_USB_FM_NUMBER : 0x%08X", *R_USB_FM_NUMBER); - dbg_rh("R_USB_FM_REMAINING: 0x%08X", *R_USB_FM_REMAINING); -*/ - - data |= (hc->rh.wPortChange_1) ? (1 << 1) : 0; - data |= (hc->rh.wPortChange_2) ? (1 << 2) : 0; - - *((__u16 *)urb->transfer_buffer) = cpu_to_le16(data); - /* FIXME: Why is actual_length set to 1 when data is 2 bytes? - Since only 1 byte is used, why not declare data as __u8? */ - urb->actual_length = 1; - urb->status = 0; - - if (hc->rh.send && urb->complete) { - dbg_rh("wPortChange_1: 0x%04X", hc->rh.wPortChange_1); - dbg_rh("wPortChange_2: 0x%04X", hc->rh.wPortChange_2); - - urb->complete(urb, NULL); - } - - DBFEXIT; -} - -static void etrax_rh_init_int_timer(struct urb *urb) -{ - etrax_hc_t *hc; - - DBFENTER; - - hc = urb->dev->bus->hcpriv; - hc->rh.interval = urb->interval; - init_timer(&hc->rh.rh_int_timer); - hc->rh.rh_int_timer.function = etrax_rh_int_timer_do; - hc->rh.rh_int_timer.data = (unsigned long)urb; - /* FIXME: Is the jiffies resolution enough? All intervals < 10 ms will be mapped - to 0, and the rest to the nearest lower 10 ms. */ - hc->rh.rh_int_timer.expires = jiffies + ((HZ * hc->rh.interval) / 1000); - add_timer(&hc->rh.rh_int_timer); - - DBFEXIT; -} - -static void etrax_rh_int_timer_do(unsigned long ptr) -{ - struct urb *urb; - etrax_hc_t *hc; - - DBFENTER; - - urb = (struct urb*)ptr; - hc = urb->dev->bus->hcpriv; - - if (hc->rh.send) { - etrax_rh_send_irq(urb); - } - - DBFEXIT; -} - -static int etrax_usb_setup_epid(struct urb *urb) -{ - int epid; - char devnum, endpoint, out_traffic, slow; - int maxlen; - unsigned long flags; - - DBFENTER; - - epid = etrax_usb_lookup_epid(urb); - if ((epid != -1)){ - /* An epid that fits this urb has been found. */ - DBFEXIT; - return epid; - } - - /* We must find and initiate a new epid for this urb. */ - epid = etrax_usb_allocate_epid(); - - if (epid == -1) { - /* Failed to allocate a new epid. */ - DBFEXIT; - return epid; - } - - /* We now have a new epid to use. Initiate it. */ - set_bit(epid, (void *)&epid_usage_bitmask); - - devnum = usb_pipedevice(urb->pipe); - endpoint = usb_pipeendpoint(urb->pipe); - slow = usb_pipeslow(urb->pipe); - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ - out_traffic = 1; - } else { - out_traffic = usb_pipeout(urb->pipe); - } - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - *R_USB_EPT_DATA_ISO = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | - /* FIXME: Change any to the actual port? */ - IO_STATE(R_USB_EPT_DATA_ISO, port, any) | - IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | - IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | - IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); - } else { - *R_USB_EPT_DATA = IO_STATE(R_USB_EPT_DATA, valid, yes) | - IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | - /* FIXME: Change any to the actual port? */ - IO_STATE(R_USB_EPT_DATA, port, any) | - IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | - IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | - IO_FIELD(R_USB_EPT_DATA, dev, devnum); - } - - restore_flags(flags); - - if (out_traffic) { - set_bit(epid, (void *)&epid_out_traffic); - } else { - clear_bit(epid, (void *)&epid_out_traffic); - } - - dbg_epid("Setting up epid %d with devnum %d, endpoint %d and max_len %d (%s)", - epid, devnum, endpoint, maxlen, out_traffic ? "OUT" : "IN"); - - DBFEXIT; - return epid; -} - -static void etrax_usb_free_epid(int epid) -{ - unsigned long flags; - - DBFENTER; - - if (!test_bit(epid, (void *)&epid_usage_bitmask)) { - warn("Trying to free unused epid %d", epid); - DBFEXIT; - return; - } - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - while (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)); - /* This will, among other things, set the valid field to 0. */ - *R_USB_EPT_DATA = 0; - restore_flags(flags); - - clear_bit(epid, (void *)&epid_usage_bitmask); - - - dbg_epid("Freed epid %d", epid); - - DBFEXIT; -} - -static int etrax_usb_lookup_epid(struct urb *urb) -{ - int i; - __u32 data; - char devnum, endpoint, slow, out_traffic; - int maxlen; - unsigned long flags; - - DBFENTER; - - devnum = usb_pipedevice(urb->pipe); - endpoint = usb_pipeendpoint(urb->pipe); - slow = usb_pipeslow(urb->pipe); - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - /* We want both IN and OUT control traffic to be put on the same EP/SB list. */ - out_traffic = 1; - } else { - out_traffic = usb_pipeout(urb->pipe); - } - - /* Step through att epids. */ - for (i = 0; i < NBR_OF_EPIDS; i++) { - if (test_bit(i, (void *)&epid_usage_bitmask) && - test_bit(i, (void *)&epid_out_traffic) == out_traffic) { - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, i); - nop(); - - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - data = *R_USB_EPT_DATA_ISO; - restore_flags(flags); - - if ((IO_MASK(R_USB_EPT_DATA_ISO, valid) & data) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, data) == devnum) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, data) == endpoint) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, data) == maxlen)) { - dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", - i, devnum, endpoint, out_traffic ? "OUT" : "IN"); - DBFEXIT; - return i; - } - } else { - data = *R_USB_EPT_DATA; - restore_flags(flags); - - if ((IO_MASK(R_USB_EPT_DATA, valid) & data) && - (IO_EXTRACT(R_USB_EPT_DATA, dev, data) == devnum) && - (IO_EXTRACT(R_USB_EPT_DATA, ep, data) == endpoint) && - (IO_EXTRACT(R_USB_EPT_DATA, low_speed, data) == slow) && - (IO_EXTRACT(R_USB_EPT_DATA, max_len, data) == maxlen)) { - dbg_epid("Found epid %d for devnum %d, endpoint %d (%s)", - i, devnum, endpoint, out_traffic ? "OUT" : "IN"); - DBFEXIT; - return i; - } - } - } - } - - DBFEXIT; - return -1; -} - -static int etrax_usb_allocate_epid(void) -{ - int i; - - DBFENTER; - - for (i = 0; i < NBR_OF_EPIDS; i++) { - if (!test_bit(i, (void *)&epid_usage_bitmask)) { - dbg_epid("Found free epid %d", i); - DBFEXIT; - return i; - } - } - - dbg_epid("Found no free epids"); - DBFEXIT; - return -1; -} - -static int etrax_usb_submit_urb(struct urb *urb, unsigned mem_flags) -{ - etrax_hc_t *hc; - int ret = -EINVAL; - - DBFENTER; - - if (!urb->dev || !urb->dev->bus) { - return -ENODEV; - } - if (usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)) <= 0) { - info("Submit urb to pipe with maxpacketlen 0, pipe 0x%X\n", urb->pipe); - return -EMSGSIZE; - } - - if (urb->timeout) { - /* FIXME. */ - warn("urb->timeout specified, ignoring."); - } - - hc = (etrax_hc_t*)urb->dev->bus->hcpriv; - - if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { - /* This request is for the Virtual Root Hub. */ - ret = etrax_rh_submit_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { - - ret = etrax_usb_submit_bulk_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - - ret = etrax_usb_submit_ctrl_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { - int bustime; - - if (urb->bandwidth == 0) { - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) { - ret = bustime; - } else { - ret = etrax_usb_submit_intr_urb(urb); - if (ret == 0) - usb_claim_bandwidth(urb->dev, urb, bustime, 0); - } - } else { - /* Bandwidth already set. */ - ret = etrax_usb_submit_intr_urb(urb); - } - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - int bustime; - - if (urb->bandwidth == 0) { - bustime = usb_check_bandwidth(urb->dev, urb); - if (bustime < 0) { - ret = bustime; - } else { - ret = etrax_usb_submit_isoc_urb(urb); - if (ret == 0) - usb_claim_bandwidth(urb->dev, urb, bustime, 0); - } - } else { - /* Bandwidth already set. */ - ret = etrax_usb_submit_isoc_urb(urb); - } - } - - DBFEXIT; - - if (ret != 0) - printk("Submit URB error %d\n", ret); - - return ret; -} - -static int etrax_usb_unlink_urb(struct urb *urb, int status) -{ - etrax_hc_t *hc; - etrax_urb_priv_t *urb_priv; - int epid; - unsigned int flags; - - DBFENTER; - - if (!urb) { - return -EINVAL; - } - - /* Disable interrupts here since a descriptor interrupt for the isoc epid - will modify the sb list. This could possibly be done more granular, but - unlink_urb should not be used frequently anyway. - */ - - save_flags(flags); - cli(); - - if (!urb->dev || !urb->dev->bus) { - restore_flags(flags); - return -ENODEV; - } - if (!urb->hcpriv) { - /* This happens if a device driver calls unlink on an urb that - was never submitted (lazy driver) or if the urb was completed - while unlink was being called. */ - restore_flags(flags); - return 0; - } - if (urb->transfer_flags & URB_ASYNC_UNLINK) { - /* FIXME. */ - /* If URB_ASYNC_UNLINK is set: - unlink - move to a separate urb list - call complete at next sof with ECONNRESET - - If not: - wait 1 ms - unlink - call complete with ENOENT - */ - warn("URB_ASYNC_UNLINK set, ignoring."); - } - - /* One might think that urb->status = -EINPROGRESS would be a requirement for unlinking, - but that doesn't work for interrupt and isochronous traffic since they are completed - repeatedly, and urb->status is set then. That may in itself be a bug though. */ - - hc = urb->dev->bus->hcpriv; - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - epid = urb_priv->epid; - - /* Set the urb status (synchronous unlink). */ - urb->status = -ENOENT; - urb_priv->urb_state = UNLINK; - - if (usb_pipedevice(urb->pipe) == hc->rh.devnum) { - int ret; - ret = etrax_rh_unlink_urb(urb); - DBFEXIT; - restore_flags(flags); - return ret; - - } else if (usb_pipetype(urb->pipe) == PIPE_BULK) { - - dbg_bulk("Unlink of bulk urb (0x%lx)", (unsigned long)urb); - - if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[epid])); - } - /* Kicking dummy list out of the party. */ - TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); - - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - - dbg_ctrl("Unlink of ctrl urb (0x%lx)", (unsigned long)urb); - - if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB1_EP == virt_to_phys(&TxCtrlEPList[epid])); - } - - } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { - - dbg_intr("Unlink of intr urb (0x%lx)", (unsigned long)urb); - - /* Separate function because it's a tad more complicated. */ - etrax_usb_unlink_intr_urb(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - - dbg_isoc("Unlink of isoc urb (0x%lx)", (unsigned long)urb); - - if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); - } - } - - /* Note that we need to remove the urb from the urb list *before* removing its SB - descriptors. (This means that the isoc eof handler might get a null urb when we - are unlinking the last urb.) */ - - if (usb_pipetype(urb->pipe) == PIPE_BULK) { - - urb_list_del(urb, epid); - TxBulkEPList[epid].sub = 0; - etrax_remove_from_sb_list(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - - urb_list_del(urb, epid); - TxCtrlEPList[epid].sub = 0; - etrax_remove_from_sb_list(urb); - - } else if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT) { - - urb_list_del(urb, epid); - /* Sanity check (should never happen). */ - assert(urb_list_empty(epid)); - - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 0); - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - - if (usb_pipeout(urb->pipe)) { - - USB_SB_Desc_t *iter_sb, *prev_sb, *next_sb; - - if (__urb_list_entry(urb, epid)) { - - urb_list_del(urb, epid); - iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; - prev_sb = 0; - while (iter_sb && (iter_sb != urb_priv->first_sb)) { - prev_sb = iter_sb; - iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; - } - - if (iter_sb == 0) { - /* Unlink of the URB currently being transmitted. */ - prev_sb = 0; - iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; - } - - while (iter_sb && (iter_sb != urb_priv->last_sb)) { - iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; - } - if (iter_sb) { - next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; - } else { - /* This should only happen if the DMA has completed - processing the SB list for this EP while interrupts - are disabled. */ - dbg_isoc("Isoc urb not found, already sent?"); - next_sb = 0; - } - if (prev_sb) { - prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; - } else { - TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; - } - - etrax_remove_from_sb_list(urb); - if (urb_list_empty(epid)) { - TxIsocEPList[epid].sub = 0; - dbg_isoc("Last isoc out urb epid %d", epid); - } else if (next_sb || prev_sb) { - dbg_isoc("Re-enable isoc out epid %d", epid); - - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - } else { - TxIsocEPList[epid].sub = 0; - dbg_isoc("URB list non-empty and no SB list, EP disabled"); - } - } else { - dbg_isoc("Urb 0x%p not found, completed already?", urb); - } - } else { - - urb_list_del(urb, epid); - - /* For in traffic there is only one SB descriptor for each EP even - though there may be several urbs (all urbs point at the same SB). */ - if (urb_list_empty(epid)) { - /* No more urbs, remove the SB. */ - TxIsocEPList[epid].sub = 0; - etrax_remove_from_sb_list(urb); - } else { - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - } - } - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 1); - } - /* Free the epid if urb list is empty. */ - if (urb_list_empty(epid)) { - etrax_usb_free_epid(epid); - } - restore_flags(flags); - - /* Must be done before calling completion handler. */ - kfree(urb_priv); - urb->hcpriv = 0; - - if (urb->complete) { - urb->complete(urb, NULL); - } - - DBFEXIT; - return 0; -} - -static int etrax_usb_get_frame_number(struct usb_device *usb_dev) -{ - DBFENTER; - DBFEXIT; - return (*R_USB_FM_NUMBER & 0x7ff); -} - -static irqreturn_t etrax_usb_tx_interrupt(int irq, void *vhc) -{ - DBFENTER; - - /* This interrupt handler could be used when unlinking EP descriptors. */ - - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { - USB_EP_Desc_t *ep; - - //dbg_bulk("dma8_sub0_descr (BULK) intr."); - - /* It should be safe clearing the interrupt here, since we don't expect to get a new - one until we restart the bulk channel. */ - *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); - - /* Wait while the DMA is running (though we don't expect it to be). */ - while (*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)); - - /* Advance the DMA to the next EP descriptor. */ - ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); - - //dbg_bulk("descr intr: DMA is at 0x%lx", (unsigned long)ep); - - /* ep->next is already a physical address; no need for a virt_to_phys. */ - *R_DMA_CH8_SUB0_EP = ep->next; - - /* Start the DMA bulk channel again. */ - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); - } - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { - struct urb *urb; - int epid; - etrax_urb_priv_t *urb_priv; - unsigned long int flags; - - dbg_ctrl("dma8_sub1_descr (CTRL) intr."); - *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); - - /* The complete callback gets called so we cli. */ - save_flags(flags); - cli(); - - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - if ((TxCtrlEPList[epid].sub == 0) || - (epid == DUMMY_EPID) || - (epid == INVALID_EPID)) { - /* Nothing here to see. */ - continue; - } - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - - if (urb) { - - /* Sanity check. */ - assert(usb_pipetype(urb->pipe) == PIPE_CONTROL); - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (urb_priv->urb_state == WAITING_FOR_DESCR_INTR) { - assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); - - etrax_usb_complete_urb(urb, 0); - } - } - } - restore_flags(flags); - } - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { - dbg_intr("dma8_sub2_descr (INTR) intr."); - *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); - } - if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { - struct urb *urb; - int epid; - int epid_done; - etrax_urb_priv_t *urb_priv; - USB_SB_Desc_t *sb_desc; - - usb_isoc_complete_data_t *comp_data = NULL; - - /* One or more isoc out transfers are done. */ - dbg_isoc("dma8_sub3_descr (ISOC) intr."); - - /* For each isoc out EP search for the first sb_desc with the intr flag - set. This descriptor must be the last packet from an URB. Then - traverse the URB list for the EP until the URB with urb_priv->last_sb - matching the intr-marked sb_desc is found. All URBs before this have - been sent. - */ - - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - /* Skip past epids with no SB lists, epids used for in traffic, - and special (dummy, invalid) epids. */ - if ((TxIsocEPList[epid].sub == 0) || - (test_bit(epid, (void *)&epid_out_traffic) == 0) || - (epid == DUMMY_EPID) || - (epid == INVALID_EPID)) { - /* Nothing here to see. */ - continue; - } - sb_desc = phys_to_virt(TxIsocEPList[epid].sub); - - /* Find the last descriptor of the currently active URB for this ep. - This is the first descriptor in the sub list marked for a descriptor - interrupt. */ - while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { - sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; - } - assert(sb_desc); - - dbg_isoc("Check epid %d, sub 0x%p, SB 0x%p", - epid, - phys_to_virt(TxIsocEPList[epid].sub), - sb_desc); - - epid_done = 0; - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - assert(urb); - - while (urb && !epid_done) { - - /* Sanity check. */ - assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); - - if (!usb_pipeout(urb->pipe)) { - /* descr interrupts are generated only for out pipes. */ - epid_done = 1; - continue; - } - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (sb_desc != urb_priv->last_sb) { - - /* This urb has been sent. */ - dbg_isoc("out URB 0x%p sent", urb); - - urb_priv->urb_state = TRANSFER_DONE; - - } else if ((sb_desc == urb_priv->last_sb) && - !(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { - - assert((sb_desc->command & IO_MASK(USB_SB_command, eol)) == IO_STATE(USB_SB_command, eol, yes)); - assert(sb_desc->next == 0); - - dbg_isoc("out URB 0x%p last in list, epid disabled", urb); - TxIsocEPList[epid].sub = 0; - TxIsocEPList[epid].hw_len = 0; - urb_priv->urb_state = TRANSFER_DONE; - - epid_done = 1; - - } else { - epid_done = 1; - } - if (!epid_done) { - urb = urb_list_next(urb, epid); - } - } - - } - - *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); - - comp_data = (usb_isoc_complete_data_t*)kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC); - assert(comp_data != NULL); - - INIT_WORK(&comp_data->usb_bh, etrax_usb_isoc_descr_interrupt_bottom_half, comp_data); - schedule_work(&comp_data->usb_bh); - } - - DBFEXIT; - return IRQ_HANDLED; -} - -static void etrax_usb_isoc_descr_interrupt_bottom_half(void *data) -{ - usb_isoc_complete_data_t *comp_data = (usb_isoc_complete_data_t*)data; - - struct urb *urb; - int epid; - int epid_done; - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - dbg_isoc("dma8_sub3_descr (ISOC) bottom half."); - - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - unsigned long flags; - - save_flags(flags); - cli(); - - epid_done = 0; - - /* The descriptor interrupt handler has marked all transmitted isoch. out - URBs with TRANSFER_DONE. Now we traverse all epids and for all that - have isoch. out traffic traverse its URB list and complete the - transmitted URB. - */ - - while (!epid_done) { - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - if (urb == 0) { - epid_done = 1; - continue; - } - - if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { - epid_done = 1; - continue; - } - - if (!usb_pipeout(urb->pipe)) { - /* descr interrupts are generated only for out pipes. */ - epid_done = 1; - continue; - } - - dbg_isoc("Check epid %d, SB 0x%p", epid, (char*)TxIsocEPList[epid].sub); - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (urb_priv->urb_state == TRANSFER_DONE) { - int i; - struct usb_iso_packet_descriptor *packet; - - /* This urb has been sent. */ - dbg_isoc("Completing isoc out URB 0x%p", urb); - - for (i = 0; i < urb->number_of_packets; i++) { - packet = &urb->iso_frame_desc[i]; - packet->status = 0; - packet->actual_length = packet->length; - } - - etrax_usb_complete_isoc_urb(urb, 0); - - if (urb_list_empty(epid)) { - etrax_usb_free_epid(epid); - epid_done = 1; - } - } else { - epid_done = 1; - } - } - restore_flags(flags); - - } - kmem_cache_free(isoc_compl_cache, comp_data); - - DBFEXIT; -} - - - -static irqreturn_t etrax_usb_rx_interrupt(int irq, void *vhc) -{ - struct urb *urb; - etrax_urb_priv_t *urb_priv; - int epid = 0; - unsigned long flags; - - /* Isoc diagnostics. */ - static int curr_fm = 0; - static int prev_fm = 0; - - DBFENTER; - - /* Clear this interrupt. */ - *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); - - /* Note that this while loop assumes that all packets span only - one rx descriptor. */ - - /* The reason we cli here is that we call the driver's callback functions. */ - save_flags(flags); - cli(); - - while (myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { - - epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); - urb = urb_list_first(epid); - - //printk("eop for epid %d, first urb 0x%lx\n", epid, (unsigned long)urb); - - if (!urb) { - err("No urb for epid %d in rx interrupt", epid); - __dump_ept_data(epid); - goto skip_out; - } - - /* Note that we cannot indescriminately assert(usb_pipein(urb->pipe)) since - ctrl pipes are not. */ - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { - __u32 r_usb_ept_data; - int no_error = 0; - - assert(test_bit(epid, (void *)&epid_usage_bitmask)); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - r_usb_ept_data = *R_USB_EPT_DATA_ISO; - - if ((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && - (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && - (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { - /* Not an error, just a failure to receive an expected iso - in packet in this frame. This is not documented - in the designers reference. - */ - no_error++; - } else { - warn("R_USB_EPT_DATA_ISO for epid %d = 0x%x", epid, r_usb_ept_data); - } - } else { - r_usb_ept_data = *R_USB_EPT_DATA; - warn("R_USB_EPT_DATA for epid %d = 0x%x", epid, r_usb_ept_data); - } - - if (!no_error){ - warn("error in rx desc->status, epid %d, first urb = 0x%lx", - epid, (unsigned long)urb); - __dump_in_desc(myNextRxDesc); - - warn("R_USB_STATUS = 0x%x", *R_USB_STATUS); - - /* Check that ept was disabled when error occurred. */ - switch (usb_pipetype(urb->pipe)) { - case PIPE_BULK: - assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - case PIPE_CONTROL: - assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - case PIPE_INTERRUPT: - assert(!(TxIntrEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - case PIPE_ISOCHRONOUS: - assert(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))); - break; - default: - warn("etrax_usb_rx_interrupt: bad pipetype %d in urb 0x%p", - usb_pipetype(urb->pipe), - urb); - } - etrax_usb_complete_urb(urb, -EPROTO); - goto skip_out; - } - } - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if ((usb_pipetype(urb->pipe) == PIPE_BULK) || - (usb_pipetype(urb->pipe) == PIPE_CONTROL) || - (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { - /* We get nodata for empty data transactions, and the rx descriptor's - hw_len field is not valid in that case. No data to copy in other - words. */ - } else { - /* Make sure the data fits in the buffer. */ - assert(urb_priv->rx_offset + myNextRxDesc->hw_len - <= urb->transfer_buffer_length); - - memcpy(urb->transfer_buffer + urb_priv->rx_offset, - phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); - urb_priv->rx_offset += myNextRxDesc->hw_len; - } - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { - if ((usb_pipetype(urb->pipe) == PIPE_CONTROL) && - ((TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable)) == - IO_STATE(USB_EP_command, enable, yes))) { - /* The EP is still enabled, so the OUT packet used to ack - the in data is probably not processed yet. If the EP - sub pointer has not moved beyond urb_priv->last_sb mark - it for a descriptor interrupt and complete the urb in - the descriptor interrupt handler. - */ - USB_SB_Desc_t *sub = TxCtrlEPList[urb_priv->epid].sub ? phys_to_virt(TxCtrlEPList[urb_priv->epid].sub) : 0; - - while ((sub != NULL) && (sub != urb_priv->last_sb)) { - sub = sub->next ? phys_to_virt(sub->next) : 0; - } - if (sub != NULL) { - /* The urb has not been fully processed. */ - urb_priv->urb_state = WAITING_FOR_DESCR_INTR; - } else { - warn("(CTRL) epid enabled and urb (0x%p) processed, ep->sub=0x%p", urb, (char*)TxCtrlEPList[urb_priv->epid].sub); - etrax_usb_complete_urb(urb, 0); - } - } else { - etrax_usb_complete_urb(urb, 0); - } - } - - } else if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - - struct usb_iso_packet_descriptor *packet; - - if (urb_priv->urb_state == UNLINK) { - info("Ignoring rx data for urb being unlinked."); - goto skip_out; - } else if (urb_priv->urb_state == NOT_STARTED) { - info("What? Got rx data for urb that isn't started?"); - goto skip_out; - } - - packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; - packet->status = 0; - - if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { - /* We get nodata for empty data transactions, and the rx descriptor's - hw_len field is not valid in that case. We copy 0 bytes however to - stay in synch. */ - packet->actual_length = 0; - } else { - packet->actual_length = myNextRxDesc->hw_len; - /* Make sure the data fits in the buffer. */ - assert(packet->actual_length <= packet->length); - memcpy(urb->transfer_buffer + packet->offset, - phys_to_virt(myNextRxDesc->buf), packet->actual_length); - } - - /* Increment the packet counter. */ - urb_priv->isoc_packet_counter++; - - /* Note that we don't care about the eot field in the rx descriptor's status. - It will always be set for isoc traffic. */ - if (urb->number_of_packets == urb_priv->isoc_packet_counter) { - - /* Out-of-synch diagnostics. */ - curr_fm = (*R_USB_FM_NUMBER & 0x7ff); - if (((prev_fm + urb_priv->isoc_packet_counter) % (0x7ff + 1)) != curr_fm) { - /* This test is wrong, if there is more than one isoc - in endpoint active it will always calculate wrong - since prev_fm is shared by all endpoints. - - FIXME Make this check per URB using urb->start_frame. - */ - dbg_isoc("Out of synch? Previous frame = %d, current frame = %d", - prev_fm, curr_fm); - - } - prev_fm = curr_fm; - - /* Complete the urb with status OK. */ - etrax_usb_complete_isoc_urb(urb, 0); - } - } - - skip_out: - - /* DMA IN cache bug. Flush the DMA IN buffer from the cache. (struct etrax_dma_descr - has the same layout as USB_IN_Desc for the relevant fields.) */ - prepare_rx_descriptor((struct etrax_dma_descr*)myNextRxDesc); - - myPrevRxDesc = myNextRxDesc; - myPrevRxDesc->command |= IO_MASK(USB_IN_command, eol); - myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); - myLastRxDesc = myPrevRxDesc; - - myNextRxDesc->status = 0; - myNextRxDesc = phys_to_virt(myNextRxDesc->next); - } - - restore_flags(flags); - - DBFEXIT; - - return IRQ_HANDLED; -} - - -/* This function will unlink the SB descriptors associated with this urb. */ -static int etrax_remove_from_sb_list(struct urb *urb) -{ - USB_SB_Desc_t *next_sb, *first_sb, *last_sb; - etrax_urb_priv_t *urb_priv; - int i = 0; - - DBFENTER; - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - /* Just a sanity check. Since we don't fiddle with the DMA list the EP descriptor - doesn't really need to be disabled, it's just that we expect it to be. */ - if (usb_pipetype(urb->pipe) == PIPE_BULK) { - assert(!(TxBulkEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); - } else if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { - assert(!(TxCtrlEPList[urb_priv->epid].command & IO_MASK(USB_EP_command, enable))); - } - - first_sb = urb_priv->first_sb; - last_sb = urb_priv->last_sb; - - assert(first_sb); - assert(last_sb); - - while (first_sb != last_sb) { - next_sb = (USB_SB_Desc_t *)phys_to_virt(first_sb->next); - kmem_cache_free(usb_desc_cache, first_sb); - first_sb = next_sb; - i++; - } - kmem_cache_free(usb_desc_cache, last_sb); - i++; - dbg_sb("%d SB descriptors freed", i); - /* Compare i with urb->number_of_packets for Isoc traffic. - Should be same when calling unlink_urb */ - - DBFEXIT; - - return i; -} - -static int etrax_usb_submit_bulk_urb(struct urb *urb) -{ - int epid; - int empty; - unsigned long flags; - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - /* Epid allocation, empty check and list add must be protected. - Read about this in etrax_usb_submit_ctrl_urb. */ - - spin_lock_irqsave(&urb_list_lock, flags); - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - DBFEXIT; - spin_unlock_irqrestore(&urb_list_lock, flags); - return -ENOMEM; - } - empty = urb_list_empty(epid); - urb_list_add(urb, epid); - spin_unlock_irqrestore(&urb_list_lock, flags); - - dbg_bulk("Adding bulk %s urb 0x%lx to %s list, epid %d", - usb_pipein(urb->pipe) ? "IN" : "OUT", (unsigned long)urb, empty ? "empty" : "", epid); - - /* Mark the urb as being in progress. */ - urb->status = -EINPROGRESS; - - /* Setup the hcpriv data. */ - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); - assert(urb_priv != NULL); - /* This sets rx_offset to 0. */ - urb_priv->urb_state = NOT_STARTED; - urb->hcpriv = urb_priv; - - if (empty) { - etrax_usb_add_to_bulk_sb_list(urb, epid); - } - - DBFEXIT; - - return 0; -} - -static void etrax_usb_add_to_bulk_sb_list(struct urb *urb, int epid) -{ - USB_SB_Desc_t *sb_desc; - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - unsigned long flags; - char maxlen; - - DBFENTER; - - dbg_bulk("etrax_usb_add_to_bulk_sb_list, urb 0x%lx", (unsigned long)urb); - - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - - sb_desc = kmem_cache_zalloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc != NULL); - - - if (usb_pipeout(urb->pipe)) { - - dbg_bulk("Grabbing bulk OUT, urb 0x%lx, epid %d", (unsigned long)urb, epid); - - /* This is probably a sanity check of the bulk transaction length - not being larger than 64 kB. */ - if (urb->transfer_buffer_length > 0xffff) { - panic("urb->transfer_buffer_length > 0xffff"); - } - - sb_desc->sw_len = urb->transfer_buffer_length; - - /* The rem field is don't care if it's not a full-length transfer, so setting - it shouldn't hurt. Also, rem isn't used for OUT traffic. */ - sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, out) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - /* The full field is set to yes, even if we don't actually check that this is - a full-length transfer (i.e., that transfer_buffer_length % maxlen = 0). - Setting full prevents the USB controller from sending an empty packet in - that case. However, if URB_ZERO_PACKET was set we want that. */ - if (!(urb->transfer_flags & URB_ZERO_PACKET)) { - sb_desc->command |= IO_STATE(USB_SB_command, full, yes); - } - - sb_desc->buf = virt_to_phys(urb->transfer_buffer); - sb_desc->next = 0; - - } else if (usb_pipein(urb->pipe)) { - - dbg_bulk("Grabbing bulk IN, urb 0x%lx, epid %d", (unsigned long)urb, epid); - - sb_desc->sw_len = urb->transfer_buffer_length ? - (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; - - /* The rem field is don't care if it's not a full-length transfer, so setting - it shouldn't hurt. */ - sb_desc->command = - (IO_FIELD(USB_SB_command, rem, - urb->transfer_buffer_length % maxlen) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - sb_desc->buf = 0; - sb_desc->next = 0; - } - - urb_priv->first_sb = sb_desc; - urb_priv->last_sb = sb_desc; - urb_priv->epid = epid; - - urb->hcpriv = urb_priv; - - /* Reset toggle bits and reset error count. */ - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - - /* FIXME: Is this a special case since the hold field is checked, - or should we check hold in a lot of other cases as well? */ - if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { - panic("Hold was set in %s", __FUNCTION__); - } - - /* Reset error counters (regardless of which direction this traffic is). */ - *R_USB_EPT_DATA &= - ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | - IO_MASK(R_USB_EPT_DATA, error_count_out)); - - /* Software must preset the toggle bits. */ - if (usb_pipeout(urb->pipe)) { - char toggle = - usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); - *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); - *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); - } else { - char toggle = - usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), usb_pipeout(urb->pipe)); - *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); - *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); - } - - /* Assert that the EP descriptor is disabled. */ - assert(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); - - /* The reason we set the EP's sub pointer directly instead of - walking the SB list and linking it last in the list is that we only - have one active urb at a time (the rest are queued). */ - - /* Note that we cannot have interrupts running when we have set the SB descriptor - but the EP is not yet enabled. If a bulk eot happens for another EP, we will - find this EP disabled and with a SB != 0, which will make us think that it's done. */ - TxBulkEPList[epid].sub = virt_to_phys(sb_desc); - TxBulkEPList[epid].hw_len = 0; - /* Note that we don't have to fill in the ep_id field since this - was done when we allocated the EP descriptors in init_tx_bulk_ep. */ - - /* Check if the dummy list is already with us (if several urbs were queued). */ - if (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0])) { - - dbg_bulk("Inviting dummy list to the party for urb 0x%lx, epid %d", - (unsigned long)urb, epid); - - /* The last EP in the dummy list already has its next pointer set to - TxBulkEPList[epid].next. */ - - /* We don't need to check if the DMA is at this EP or not before changing the - next pointer, since we will do it in one 32-bit write (EP descriptors are - 32-bit aligned). */ - TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); - } - /* Enable the EP descr. */ - dbg_bulk("Enabling bulk EP for urb 0x%lx, epid %d", (unsigned long)urb, epid); - TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - - /* Everything is set up, safe to enable interrupts again. */ - restore_flags(flags); - - /* If the DMA bulk channel isn't running, we need to restart it if it - has stopped at the last EP descriptor (DMA stopped because there was - no more traffic) or if it has stopped at a dummy EP with the intr flag - set (DMA stopped because we were too slow in inserting new traffic). */ - if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { - - USB_EP_Desc_t *ep; - ep = (USB_EP_Desc_t *)phys_to_virt(*R_DMA_CH8_SUB0_EP); - dbg_bulk("DMA channel not running in add"); - dbg_bulk("DMA is at 0x%lx", (unsigned long)ep); - - if (*R_DMA_CH8_SUB0_EP == virt_to_phys(&TxBulkEPList[NBR_OF_EPIDS - 1]) || - (ep->command & 0x8) >> 3) { - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); - /* Update/restart the bulk start timer since we just started the channel. */ - mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); - /* Update/restart the bulk eot timer since we just inserted traffic. */ - mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); - } - } - - DBFEXIT; -} - -static void etrax_usb_complete_bulk_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - unsigned long flags; - - DBFENTER; - - if (status) - warn("Completing bulk urb with status %d.", status); - - dbg_bulk("Completing bulk urb 0x%lx for epid %d", (unsigned long)urb, epid); - - /* Update the urb list. */ - urb_list_del(urb, epid); - - /* For an IN pipe, we always set the actual length, regardless of whether there was - an error or not (which means the device driver can use the data if it wants to). */ - if (usb_pipein(urb->pipe)) { - urb->actual_length = urb_priv->rx_offset; - } else { - /* Set actual_length for OUT urbs also; the USB mass storage driver seems - to want that. We wouldn't know of any partial writes if there was an error. */ - if (status == 0) { - urb->actual_length = urb->transfer_buffer_length; - } else { - urb->actual_length = 0; - } - } - - /* FIXME: Is there something of the things below we shouldn't do if there was an error? - Like, maybe we shouldn't toggle the toggle bits, or maybe we shouldn't insert more traffic. */ - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - - /* We need to fiddle with the toggle bits because the hardware doesn't do it for us. */ - if (usb_pipeout(urb->pipe)) { - char toggle = - IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); - usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), - usb_pipeout(urb->pipe), toggle); - } else { - char toggle = - IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); - usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), - usb_pipeout(urb->pipe), toggle); - } - restore_flags(flags); - - /* Remember to free the SBs. */ - etrax_remove_from_sb_list(urb); - kfree(urb_priv); - urb->hcpriv = 0; - - /* If there are any more urb's in the list we'd better start sending */ - if (!urb_list_empty(epid)) { - - struct urb *new_urb; - - /* Get the first urb. */ - new_urb = urb_list_first(epid); - assert(new_urb); - - dbg_bulk("More bulk for epid %d", epid); - - etrax_usb_add_to_bulk_sb_list(new_urb, epid); - } - - urb->status = status; - - /* We let any non-zero status from the layer above have precedence. */ - if (status == 0) { - /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) - is to be treated as an error. */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - if (usb_pipein(urb->pipe) && - (urb->actual_length != - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { - urb->status = -EREMOTEIO; - } - } - } - - if (urb->complete) { - urb->complete(urb, NULL); - } - - if (urb_list_empty(epid)) { - /* This means that this EP is now free, deconfigure it. */ - etrax_usb_free_epid(epid); - - /* No more traffic; time to clean up. - Must set sub pointer to 0, since we look at the sub pointer when handling - the bulk eot interrupt. */ - - dbg_bulk("No bulk for epid %d", epid); - - TxBulkEPList[epid].sub = 0; - - /* Unlink the dummy list. */ - - dbg_bulk("Kicking dummy list out of party for urb 0x%lx, epid %d", - (unsigned long)urb, epid); - - /* No need to wait for the DMA before changing the next pointer. - The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use - the last one (INVALID_EPID) for actual traffic. */ - TxBulkEPList[epid].next = - virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); - } - - DBFEXIT; -} - -static int etrax_usb_submit_ctrl_urb(struct urb *urb) -{ - int epid; - int empty; - unsigned long flags; - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - /* FIXME: Return -ENXIO if there is already a queued urb for this endpoint? */ - - /* Epid allocation, empty check and list add must be protected. - - Epid allocation because if we find an existing epid for this endpoint an urb might be - completed (emptying the list) before we add the new urb to the list, causing the epid - to be de-allocated. We would then start the transfer with an invalid epid -> epid attn. - - Empty check and add because otherwise we might conclude that the list is not empty, - after which it becomes empty before we add the new urb to the list, causing us not to - insert the new traffic into the SB list. */ - - spin_lock_irqsave(&urb_list_lock, flags); - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - spin_unlock_irqrestore(&urb_list_lock, flags); - DBFEXIT; - return -ENOMEM; - } - empty = urb_list_empty(epid); - urb_list_add(urb, epid); - spin_unlock_irqrestore(&urb_list_lock, flags); - - dbg_ctrl("Adding ctrl urb 0x%lx to %s list, epid %d", - (unsigned long)urb, empty ? "empty" : "", epid); - - /* Mark the urb as being in progress. */ - urb->status = -EINPROGRESS; - - /* Setup the hcpriv data. */ - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); - assert(urb_priv != NULL); - /* This sets rx_offset to 0. */ - urb_priv->urb_state = NOT_STARTED; - urb->hcpriv = urb_priv; - - if (empty) { - etrax_usb_add_to_ctrl_sb_list(urb, epid); - } - - DBFEXIT; - - return 0; -} - -static void etrax_usb_add_to_ctrl_sb_list(struct urb *urb, int epid) -{ - USB_SB_Desc_t *sb_desc_setup; - USB_SB_Desc_t *sb_desc_data; - USB_SB_Desc_t *sb_desc_status; - - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - - unsigned long flags; - char maxlen; - - DBFENTER; - - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - - sb_desc_setup = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_setup != NULL); - sb_desc_status = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_status != NULL); - - /* Initialize the mandatory setup SB descriptor (used only in control transfers) */ - sb_desc_setup->sw_len = 8; - sb_desc_setup->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, setup) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes)); - - sb_desc_setup->buf = virt_to_phys(urb->setup_packet); - - if (usb_pipeout(urb->pipe)) { - dbg_ctrl("Transfer for epid %d is OUT", epid); - - /* If this Control OUT transfer has an optional data stage we add an OUT token - before the mandatory IN (status) token, hence the reordered SB list */ - - sb_desc_setup->next = virt_to_phys(sb_desc_status); - if (urb->transfer_buffer) { - - dbg_ctrl("This OUT transfer has an extra data stage"); - - sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_data != NULL); - - sb_desc_setup->next = virt_to_phys(sb_desc_data); - - sb_desc_data->sw_len = urb->transfer_buffer_length; - sb_desc_data->command = (IO_STATE(USB_SB_command, tt, out) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes)); - sb_desc_data->buf = virt_to_phys(urb->transfer_buffer); - sb_desc_data->next = virt_to_phys(sb_desc_status); - } - - sb_desc_status->sw_len = 1; - sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, intr, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - sb_desc_status->buf = 0; - sb_desc_status->next = 0; - - } else if (usb_pipein(urb->pipe)) { - - dbg_ctrl("Transfer for epid %d is IN", epid); - dbg_ctrl("transfer_buffer_length = %d", urb->transfer_buffer_length); - dbg_ctrl("rem is calculated to %d", urb->transfer_buffer_length % maxlen); - - sb_desc_data = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(sb_desc_data != NULL); - - sb_desc_setup->next = virt_to_phys(sb_desc_data); - - sb_desc_data->sw_len = urb->transfer_buffer_length ? - (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; - dbg_ctrl("sw_len got %d", sb_desc_data->sw_len); - - sb_desc_data->command = - (IO_FIELD(USB_SB_command, rem, - urb->transfer_buffer_length % maxlen) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes)); - - sb_desc_data->buf = 0; - sb_desc_data->next = virt_to_phys(sb_desc_status); - - /* Read comment at zout_buffer declaration for an explanation to this. */ - sb_desc_status->sw_len = 1; - sb_desc_status->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, full, yes) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, intr, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - sb_desc_status->buf = virt_to_phys(&zout_buffer[0]); - sb_desc_status->next = 0; - } - - urb_priv->first_sb = sb_desc_setup; - urb_priv->last_sb = sb_desc_status; - urb_priv->epid = epid; - - urb_priv->urb_state = STARTED; - - /* Reset toggle bits and reset error count, remember to di and ei */ - /* Warning: it is possible that this locking doesn't work with bottom-halves */ - - save_flags(flags); - cli(); - - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - if (*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) { - panic("Hold was set in %s", __FUNCTION__); - } - - - /* FIXME: Compare with etrax_usb_add_to_bulk_sb_list where the toggle bits - are set to a specific value. Why the difference? Read "Transfer and Toggle Bits - in Designer's Reference, p. 8 - 11. */ - *R_USB_EPT_DATA &= - ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | - IO_MASK(R_USB_EPT_DATA, error_count_out) | - IO_MASK(R_USB_EPT_DATA, t_in) | - IO_MASK(R_USB_EPT_DATA, t_out)); - - /* Since we use the rx interrupt to complete ctrl urbs, we can enable interrupts now - (i.e. we don't check the sub pointer on an eot interrupt like we do for bulk traffic). */ - restore_flags(flags); - - /* Assert that the EP descriptor is disabled. */ - assert(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); - - /* Set up and enable the EP descriptor. */ - TxCtrlEPList[epid].sub = virt_to_phys(sb_desc_setup); - TxCtrlEPList[epid].hw_len = 0; - TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - - /* We start the DMA sub channel without checking if it's running or not, because: - 1) If it's already running, issuing the start command is a nop. - 2) We avoid a test-and-set race condition. */ - *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); - - DBFEXIT; -} - -static void etrax_usb_complete_ctrl_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - - DBFENTER; - - if (status) - warn("Completing ctrl urb with status %d.", status); - - dbg_ctrl("Completing ctrl epid %d, urb 0x%lx", epid, (unsigned long)urb); - - /* Remove this urb from the list. */ - urb_list_del(urb, epid); - - /* For an IN pipe, we always set the actual length, regardless of whether there was - an error or not (which means the device driver can use the data if it wants to). */ - if (usb_pipein(urb->pipe)) { - urb->actual_length = urb_priv->rx_offset; - } - - /* FIXME: Is there something of the things below we shouldn't do if there was an error? - Like, maybe we shouldn't insert more traffic. */ - - /* Remember to free the SBs. */ - etrax_remove_from_sb_list(urb); - kfree(urb_priv); - urb->hcpriv = 0; - - /* If there are any more urbs in the list we'd better start sending. */ - if (!urb_list_empty(epid)) { - struct urb *new_urb; - - /* Get the first urb. */ - new_urb = urb_list_first(epid); - assert(new_urb); - - dbg_ctrl("More ctrl for epid %d, first urb = 0x%lx", epid, (unsigned long)new_urb); - - etrax_usb_add_to_ctrl_sb_list(new_urb, epid); - } - - urb->status = status; - - /* We let any non-zero status from the layer above have precedence. */ - if (status == 0) { - /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) - is to be treated as an error. */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - if (usb_pipein(urb->pipe) && - (urb->actual_length != - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)))) { - urb->status = -EREMOTEIO; - } - } - } - - if (urb->complete) { - urb->complete(urb, NULL); - } - - if (urb_list_empty(epid)) { - /* No more traffic. Time to clean up. */ - etrax_usb_free_epid(epid); - /* Must set sub pointer to 0. */ - dbg_ctrl("No ctrl for epid %d", epid); - TxCtrlEPList[epid].sub = 0; - } - - DBFEXIT; -} - -static int etrax_usb_submit_intr_urb(struct urb *urb) -{ - - int epid; - - DBFENTER; - - if (usb_pipeout(urb->pipe)) { - /* Unsupported transfer type. - We don't support interrupt out traffic. (If we do, we can't support - intervals for neither in or out traffic, but are forced to schedule all - interrupt traffic in one frame.) */ - return -EINVAL; - } - - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - DBFEXIT; - return -ENOMEM; - } - - if (!urb_list_empty(epid)) { - /* There is already a queued urb for this endpoint. */ - etrax_usb_free_epid(epid); - return -ENXIO; - } - - urb->status = -EINPROGRESS; - - dbg_intr("Add intr urb 0x%lx, to list, epid %d", (unsigned long)urb, epid); - - urb_list_add(urb, epid); - etrax_usb_add_to_intr_sb_list(urb, epid); - - return 0; - - DBFEXIT; -} - -static void etrax_usb_add_to_intr_sb_list(struct urb *urb, int epid) -{ - - volatile USB_EP_Desc_t *tmp_ep; - volatile USB_EP_Desc_t *first_ep; - - char maxlen; - int interval; - int i; - - etrax_urb_priv_t *urb_priv; - - DBFENTER; - - maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - interval = urb->interval; - - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), KMALLOC_FLAG); - assert(urb_priv != NULL); - urb->hcpriv = urb_priv; - - first_ep = &TxIntrEPList[0]; - - /* Round of the interval to 2^n, it is obvious that this code favours - smaller numbers, but that is actually a good thing */ - /* FIXME: The "rounding error" for larger intervals will be quite - large. For in traffic this shouldn't be a problem since it will only - mean that we "poll" more often. */ - for (i = 0; interval; i++) { - interval = interval >> 1; - } - interval = 1 << (i - 1); - - dbg_intr("Interval rounded to %d", interval); - - tmp_ep = first_ep; - i = 0; - do { - if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { - if ((i % interval) == 0) { - /* Insert the traffic ep after tmp_ep */ - USB_EP_Desc_t *ep_desc; - USB_SB_Desc_t *sb_desc; - - dbg_intr("Inserting EP for epid %d", epid); - - ep_desc = (USB_EP_Desc_t *) - kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - sb_desc = (USB_SB_Desc_t *) - kmem_cache_alloc(usb_desc_cache, SLAB_FLAG); - assert(ep_desc != NULL); - CHECK_ALIGN(ep_desc); - assert(sb_desc != NULL); - - ep_desc->sub = virt_to_phys(sb_desc); - ep_desc->hw_len = 0; - ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | - IO_STATE(USB_EP_command, enable, yes)); - - - /* Round upwards the number of packets of size maxlen - that this SB descriptor should receive. */ - sb_desc->sw_len = urb->transfer_buffer_length ? - (urb->transfer_buffer_length - 1) / maxlen + 1 : 0; - sb_desc->next = 0; - sb_desc->buf = 0; - sb_desc->command = - (IO_FIELD(USB_SB_command, rem, urb->transfer_buffer_length % maxlen) | - IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - ep_desc->next = tmp_ep->next; - tmp_ep->next = virt_to_phys(ep_desc); - } - i++; - } - tmp_ep = (USB_EP_Desc_t *)phys_to_virt(tmp_ep->next); - } while (tmp_ep != first_ep); - - - /* Note that first_sb/last_sb doesn't apply to interrupt traffic. */ - urb_priv->epid = epid; - - /* We start the DMA sub channel without checking if it's running or not, because: - 1) If it's already running, issuing the start command is a nop. - 2) We avoid a test-and-set race condition. */ - *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); - - DBFEXIT; -} - - - -static void etrax_usb_complete_intr_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - - DBFENTER; - - if (status) - warn("Completing intr urb with status %d.", status); - - dbg_intr("Completing intr epid %d, urb 0x%lx", epid, (unsigned long)urb); - - urb->status = status; - urb->actual_length = urb_priv->rx_offset; - - dbg_intr("interrupt urb->actual_length = %d", urb->actual_length); - - /* We let any non-zero status from the layer above have precedence. */ - if (status == 0) { - /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's max length) - is to be treated as an error. */ - if (urb->transfer_flags & URB_SHORT_NOT_OK) { - if (urb->actual_length != - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { - urb->status = -EREMOTEIO; - } - } - } - - /* The driver will resubmit the URB so we need to remove it first */ - etrax_usb_unlink_urb(urb, 0); - if (urb->complete) { - urb->complete(urb, NULL); - } - - DBFEXIT; -} - - -static int etrax_usb_submit_isoc_urb(struct urb *urb) -{ - int epid; - unsigned long flags; - - DBFENTER; - - dbg_isoc("Submitting isoc urb = 0x%lx", (unsigned long)urb); - - /* Epid allocation, empty check and list add must be protected. - Read about this in etrax_usb_submit_ctrl_urb. */ - - spin_lock_irqsave(&urb_list_lock, flags); - /* Is there an active epid for this urb ? */ - epid = etrax_usb_setup_epid(urb); - if (epid == -1) { - DBFEXIT; - spin_unlock_irqrestore(&urb_list_lock, flags); - return -ENOMEM; - } - - /* Ok, now we got valid endpoint, lets insert some traffic */ - - urb->status = -EINPROGRESS; - - /* Find the last urb in the URB_List and add this urb after that one. - Also add the traffic, that is do an etrax_usb_add_to_isoc_sb_list. This - is important to make this in "real time" since isochronous traffic is - time sensitive. */ - - dbg_isoc("Adding isoc urb to (possibly empty) list"); - urb_list_add(urb, epid); - etrax_usb_add_to_isoc_sb_list(urb, epid); - spin_unlock_irqrestore(&urb_list_lock, flags); - - DBFEXIT; - - return 0; -} - -static void etrax_usb_check_error_isoc_ep(const int epid) -{ - unsigned long int flags; - int error_code; - __u32 r_usb_ept_data; - - /* We can't read R_USB_EPID_ATTN here since it would clear the iso_eof, - bulk_eot and epid_attn interrupts. So we just check the status of - the epid without testing if for it in R_USB_EPID_ATTN. */ - - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO - registers, they are located at the same address and are of the same size. - In other words, this read should be ok for isoc also. */ - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); - - if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { - warn("Hold was set for epid %d.", epid); - return; - } - - if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, no_error)) { - - /* This indicates that the SB list of the ept was completed before - new data was appended to it. This is not an error, but indicates - large system or USB load and could possibly cause trouble for - very timing sensitive USB device drivers so we log it. - */ - info("Isoc. epid %d disabled with no error", epid); - return; - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, stall)) { - /* Not really a protocol error, just says that the endpoint gave - a stall response. Note that error_code cannot be stall for isoc. */ - panic("Isoc traffic cannot stall"); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA_ISO, error_code, bus_error)) { - /* Two devices responded to a transaction request. Must be resolved - by software. FIXME: Reset ports? */ - panic("Bus error for epid %d." - " Two devices responded to transaction request", - epid); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { - /* DMA overrun or underrun. */ - warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); - - /* It seems that error_code = buffer_error in - R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS - are the same error. */ - } -} - - -static void etrax_usb_add_to_isoc_sb_list(struct urb *urb, int epid) -{ - - int i = 0; - - etrax_urb_priv_t *urb_priv; - USB_SB_Desc_t *prev_sb_desc, *next_sb_desc, *temp_sb_desc; - - DBFENTER; - - prev_sb_desc = next_sb_desc = temp_sb_desc = NULL; - - urb_priv = kzalloc(sizeof(etrax_urb_priv_t), GFP_ATOMIC); - assert(urb_priv != NULL); - - urb->hcpriv = urb_priv; - urb_priv->epid = epid; - - if (usb_pipeout(urb->pipe)) { - - if (urb->number_of_packets == 0) panic("etrax_usb_add_to_isoc_sb_list 0 packets\n"); - - dbg_isoc("Transfer for epid %d is OUT", epid); - dbg_isoc("%d packets in URB", urb->number_of_packets); - - /* Create one SB descriptor for each packet and link them together. */ - for (i = 0; i < urb->number_of_packets; i++) { - if (!urb->iso_frame_desc[i].length) - continue; - - next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC); - assert(next_sb_desc != NULL); - - if (urb->iso_frame_desc[i].length > 0) { - - next_sb_desc->command = (IO_STATE(USB_SB_command, tt, out) | - IO_STATE(USB_SB_command, eot, yes)); - - next_sb_desc->sw_len = urb->iso_frame_desc[i].length; - next_sb_desc->buf = virt_to_phys((char*)urb->transfer_buffer + urb->iso_frame_desc[i].offset); - - /* Check if full length transfer. */ - if (urb->iso_frame_desc[i].length == - usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { - next_sb_desc->command |= IO_STATE(USB_SB_command, full, yes); - } - } else { - dbg_isoc("zero len packet"); - next_sb_desc->command = (IO_FIELD(USB_SB_command, rem, 0) | - IO_STATE(USB_SB_command, tt, zout) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, full, yes)); - - next_sb_desc->sw_len = 1; - next_sb_desc->buf = virt_to_phys(&zout_buffer[0]); - } - - /* First SB descriptor that belongs to this urb */ - if (i == 0) - urb_priv->first_sb = next_sb_desc; - else - prev_sb_desc->next = virt_to_phys(next_sb_desc); - - prev_sb_desc = next_sb_desc; - } - - next_sb_desc->command |= (IO_STATE(USB_SB_command, intr, yes) | - IO_STATE(USB_SB_command, eol, yes)); - next_sb_desc->next = 0; - urb_priv->last_sb = next_sb_desc; - - } else if (usb_pipein(urb->pipe)) { - - dbg_isoc("Transfer for epid %d is IN", epid); - dbg_isoc("transfer_buffer_length = %d", urb->transfer_buffer_length); - dbg_isoc("rem is calculated to %d", urb->iso_frame_desc[urb->number_of_packets - 1].length); - - /* Note that in descriptors for periodic traffic are not consumed. This means that - the USB controller never propagates in the SB list. In other words, if there already - is an SB descriptor in the list for this EP we don't have to do anything. */ - if (TxIsocEPList[epid].sub == 0) { - dbg_isoc("Isoc traffic not already running, allocating SB"); - - next_sb_desc = (USB_SB_Desc_t*)kmem_cache_alloc(usb_desc_cache, GFP_ATOMIC); - assert(next_sb_desc != NULL); - - next_sb_desc->command = (IO_STATE(USB_SB_command, tt, in) | - IO_STATE(USB_SB_command, eot, yes) | - IO_STATE(USB_SB_command, eol, yes)); - - next_sb_desc->next = 0; - next_sb_desc->sw_len = 1; /* Actual number of packets is not relevant - for periodic in traffic as long as it is more - than zero. Set to 1 always. */ - next_sb_desc->buf = 0; - - /* The rem field is don't care for isoc traffic, so we don't set it. */ - - /* Only one SB descriptor that belongs to this urb. */ - urb_priv->first_sb = next_sb_desc; - urb_priv->last_sb = next_sb_desc; - - } else { - - dbg_isoc("Isoc traffic already running, just setting first/last_sb"); - - /* Each EP for isoc in will have only one SB descriptor, setup when submitting the - already active urb. Note that even though we may have several first_sb/last_sb - pointing at the same SB descriptor, they are freed only once (when the list has - become empty). */ - urb_priv->first_sb = phys_to_virt(TxIsocEPList[epid].sub); - urb_priv->last_sb = phys_to_virt(TxIsocEPList[epid].sub); - return; - } - - } - - /* Find the spot to insert this urb and add it. */ - if (TxIsocEPList[epid].sub == 0) { - /* First SB descriptor inserted in this list (in or out). */ - dbg_isoc("Inserting SB desc first in list"); - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); - - } else { - /* Isochronous traffic is already running, insert new traffic last (only out). */ - dbg_isoc("Inserting SB desc last in list"); - temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); - while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != - IO_STATE(USB_SB_command, eol, yes)) { - assert(temp_sb_desc->next); - temp_sb_desc = phys_to_virt(temp_sb_desc->next); - } - dbg_isoc("Appending list on desc 0x%p", temp_sb_desc); - - /* Next pointer must be set before eol is removed. */ - temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); - /* Clear the previous end of list flag since there is a new in the - added SB descriptor list. */ - temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); - - if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { - /* 8.8.5 in Designer's Reference says we should check for and correct - any errors in the EP here. That should not be necessary if epid_attn - is handled correctly, so we assume all is ok. */ - dbg_isoc("EP disabled"); - etrax_usb_check_error_isoc_ep(epid); - - /* The SB list was exhausted. */ - if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { - /* The new sublist did not get processed before the EP was - disabled. Setup the EP again. */ - dbg_isoc("Set EP sub to new list"); - TxIsocEPList[epid].hw_len = 0; - TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); - } - } - } - - if (urb->transfer_flags & URB_ISO_ASAP) { - /* The isoc transfer should be started as soon as possible. The start_frame - field is a return value if URB_ISO_ASAP was set. Comparing R_USB_FM_NUMBER - with a USB Chief trace shows that the first isoc IN token is sent 2 frames - later. I'm not sure how this affects usage of the start_frame field by the - device driver, or how it affects things when USB_ISO_ASAP is not set, so - therefore there's no compensation for the 2 frame "lag" here. */ - urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - urb_priv->urb_state = STARTED; - dbg_isoc("URB_ISO_ASAP set, urb->start_frame set to %d", urb->start_frame); - } else { - /* Not started yet. */ - urb_priv->urb_state = NOT_STARTED; - dbg_isoc("urb_priv->urb_state set to NOT_STARTED"); - } - - /* We start the DMA sub channel without checking if it's running or not, because: - 1) If it's already running, issuing the start command is a nop. - 2) We avoid a test-and-set race condition. */ - *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); - - DBFEXIT; -} - -static void etrax_usb_complete_isoc_urb(struct urb *urb, int status) -{ - etrax_urb_priv_t *urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - int epid = urb_priv->epid; - int auto_resubmit = 0; - - DBFENTER; - dbg_isoc("complete urb 0x%p, status %d", urb, status); - - if (status) - warn("Completing isoc urb with status %d.", status); - - if (usb_pipein(urb->pipe)) { - int i; - - /* Make that all isoc packets have status and length set before - completing the urb. */ - for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++) { - urb->iso_frame_desc[i].actual_length = 0; - urb->iso_frame_desc[i].status = -EPROTO; - } - - urb_list_del(urb, epid); - - if (!list_empty(&urb_list[epid])) { - ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; - } else { - unsigned long int flags; - if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - /* The EP was enabled, disable it and wait. */ - TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); - - /* Ah, the luxury of busy-wait. */ - while (*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])); - } - - etrax_remove_from_sb_list(urb); - TxIsocEPList[epid].sub = 0; - TxIsocEPList[epid].hw_len = 0; - - save_flags(flags); - cli(); - etrax_usb_free_epid(epid); - restore_flags(flags); - } - - urb->hcpriv = 0; - kfree(urb_priv); - - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 0); - } else if (usb_pipeout(urb->pipe)) { - int freed_descr; - - dbg_isoc("Isoc out urb complete 0x%p", urb); - - /* Update the urb list. */ - urb_list_del(urb, epid); - - freed_descr = etrax_remove_from_sb_list(urb); - dbg_isoc("freed %d descriptors of %d packets", freed_descr, urb->number_of_packets); - assert(freed_descr == urb->number_of_packets); - urb->hcpriv = 0; - kfree(urb_priv); - - /* Release allocated bandwidth. */ - usb_release_bandwidth(urb->dev, urb, 0); - } - - urb->status = status; - if (urb->complete) { - urb->complete(urb, NULL); - } - - if (auto_resubmit) { - /* Check that urb was not unlinked by the complete callback. */ - if (__urb_list_entry(urb, epid)) { - /* Move this one down the list. */ - urb_list_move_last(urb, epid); - - /* Mark the now first urb as started (may already be). */ - ((etrax_urb_priv_t *)(urb_list_first(epid)->hcpriv))->urb_state = STARTED; - - /* Must set this to 0 since this urb is still active after - completion. */ - urb_priv->isoc_packet_counter = 0; - } else { - warn("(ISOC) automatic resubmit urb 0x%p removed by complete.", urb); - } - } - - DBFEXIT; -} - -static void etrax_usb_complete_urb(struct urb *urb, int status) -{ - switch (usb_pipetype(urb->pipe)) { - case PIPE_BULK: - etrax_usb_complete_bulk_urb(urb, status); - break; - case PIPE_CONTROL: - etrax_usb_complete_ctrl_urb(urb, status); - break; - case PIPE_INTERRUPT: - etrax_usb_complete_intr_urb(urb, status); - break; - case PIPE_ISOCHRONOUS: - etrax_usb_complete_isoc_urb(urb, status); - break; - default: - err("Unknown pipetype"); - } -} - - - -static irqreturn_t etrax_usb_hc_interrupt_top_half(int irq, void *vhc) -{ - usb_interrupt_registers_t *reg; - unsigned long flags; - __u32 irq_mask; - __u8 status; - __u32 epid_attn; - __u16 port_status_1; - __u16 port_status_2; - __u32 fm_number; - - DBFENTER; - - /* Read critical registers into local variables, do kmalloc afterwards. */ - save_flags(flags); - cli(); - - irq_mask = *R_USB_IRQ_MASK_READ; - /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that R_USB_STATUS - must be read before R_USB_EPID_ATTN since reading the latter clears the - ourun and perror fields of R_USB_STATUS. */ - status = *R_USB_STATUS; - - /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn interrupts. */ - epid_attn = *R_USB_EPID_ATTN; - - /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the - port_status interrupt. */ - port_status_1 = *R_USB_RH_PORT_STATUS_1; - port_status_2 = *R_USB_RH_PORT_STATUS_2; - - /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ - /* Note: the lower 11 bits contain the actual frame number, sent with each sof. */ - fm_number = *R_USB_FM_NUMBER; - - restore_flags(flags); - - reg = (usb_interrupt_registers_t *)kmem_cache_alloc(top_half_reg_cache, GFP_ATOMIC); - - assert(reg != NULL); - - reg->hc = (etrax_hc_t *)vhc; - - /* Now put register values into kmalloc'd area. */ - reg->r_usb_irq_mask_read = irq_mask; - reg->r_usb_status = status; - reg->r_usb_epid_attn = epid_attn; - reg->r_usb_rh_port_status_1 = port_status_1; - reg->r_usb_rh_port_status_2 = port_status_2; - reg->r_usb_fm_number = fm_number; - - INIT_WORK(®->usb_bh, etrax_usb_hc_interrupt_bottom_half, reg); - schedule_work(®->usb_bh); - - DBFEXIT; - - return IRQ_HANDLED; -} - -static void etrax_usb_hc_interrupt_bottom_half(void *data) -{ - usb_interrupt_registers_t *reg = (usb_interrupt_registers_t *)data; - __u32 irq_mask = reg->r_usb_irq_mask_read; - - DBFENTER; - - /* Interrupts are handled in order of priority. */ - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { - etrax_usb_hc_epid_attn_interrupt(reg); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { - etrax_usb_hc_port_status_interrupt(reg); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { - etrax_usb_hc_ctl_status_interrupt(reg); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { - etrax_usb_hc_isoc_eof_interrupt(); - } - if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { - /* Update/restart the bulk start timer since obviously the channel is running. */ - mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); - /* Update/restart the bulk eot timer since we just received an bulk eot interrupt. */ - mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); - - etrax_usb_hc_bulk_eot_interrupt(0); - } - - kmem_cache_free(top_half_reg_cache, reg); - - DBFEXIT; -} - - -void etrax_usb_hc_isoc_eof_interrupt(void) -{ - struct urb *urb; - etrax_urb_priv_t *urb_priv; - int epid; - unsigned long flags; - - DBFENTER; - - /* Do not check the invalid epid (it has a valid sub pointer). */ - for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { - - /* Do not check the invalid epid (it has a valid sub pointer). */ - if ((epid == DUMMY_EPID) || (epid == INVALID_EPID)) - continue; - - /* Disable interrupts to block the isoc out descriptor interrupt handler - from being called while the isoc EPID list is being checked. - */ - save_flags(flags); - cli(); - - if (TxIsocEPList[epid].sub == 0) { - /* Nothing here to see. */ - restore_flags(flags); - continue; - } - - /* Get the first urb (if any). */ - urb = urb_list_first(epid); - if (urb == 0) { - warn("Ignoring NULL urb"); - restore_flags(flags); - continue; - } - if (usb_pipein(urb->pipe)) { - - /* Sanity check. */ - assert(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); - - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - if (urb_priv->urb_state == NOT_STARTED) { - - /* If ASAP is not set and urb->start_frame is the current frame, - start the transfer. */ - if (!(urb->transfer_flags & URB_ISO_ASAP) && - (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { - - dbg_isoc("Enabling isoc IN EP descr for epid %d", epid); - TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); - - /* This urb is now active. */ - urb_priv->urb_state = STARTED; - continue; - } - } - } - restore_flags(flags); - } - - DBFEXIT; - -} - -void etrax_usb_hc_bulk_eot_interrupt(int timer_induced) -{ - int epid; - - /* The technique is to run one urb at a time, wait for the eot interrupt at which - point the EP descriptor has been disabled. */ - - DBFENTER; - dbg_bulk("bulk eot%s", timer_induced ? ", called by timer" : ""); - - for (epid = 0; epid < NBR_OF_EPIDS; epid++) { - - if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && - (TxBulkEPList[epid].sub != 0)) { - - struct urb *urb; - etrax_urb_priv_t *urb_priv; - unsigned long flags; - __u32 r_usb_ept_data; - - /* Found a disabled EP descriptor which has a non-null sub pointer. - Verify that this ctrl EP descriptor got disabled no errors. - FIXME: Necessary to check error_code? */ - dbg_bulk("for epid %d?", epid); - - /* Get the first urb. */ - urb = urb_list_first(epid); - - /* FIXME: Could this happen for valid reasons? Why did it disappear? Because of - wrong unlinking? */ - if (!urb) { - warn("NULL urb for epid %d", epid); - continue; - } - - assert(urb); - urb_priv = (etrax_urb_priv_t *)urb->hcpriv; - assert(urb_priv); - - /* Sanity checks. */ - assert(usb_pipetype(urb->pipe) == PIPE_BULK); - if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { - err("bulk endpoint got disabled before reaching last sb"); - } - - /* For bulk IN traffic, there seems to be a race condition between - between the bulk eot and eop interrupts, or rather an uncertainty regarding - the order in which they happen. Normally we expect the eop interrupt from - DMA channel 9 to happen before the eot interrupt. - - Therefore, we complete the bulk IN urb in the rx interrupt handler instead. */ - - if (usb_pipein(urb->pipe)) { - dbg_bulk("in urb, continuing"); - continue; - } - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - if (IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data) == - IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { - /* This means that the endpoint has no error, is disabled - and had inserted traffic, i.e. transfer successfully completed. */ - etrax_usb_complete_bulk_urb(urb, 0); - } else { - /* Shouldn't happen. We expect errors to be caught by epid attention. */ - err("Found disabled bulk EP desc, error_code != no_error"); - } - } - } - - /* Normally, we should find (at least) one disabled EP descriptor with a valid sub pointer. - However, because of the uncertainty in the deliverance of the eop/eot interrupts, we may - not. Also, we might find two disabled EPs when handling an eot interrupt, and then find - none the next time. */ - - DBFEXIT; - -} - -void etrax_usb_hc_epid_attn_interrupt(usb_interrupt_registers_t *reg) -{ - /* This function handles the epid attention interrupt. There are a variety of reasons - for this interrupt to happen (Designer's Reference, p. 8 - 22 for the details): - - invalid ep_id - Invalid epid in an EP (EP disabled). - stall - Not strictly an error condition (EP disabled). - 3rd error - Three successive transaction errors (EP disabled). - buffer ourun - Buffer overrun or underrun (EP disabled). - past eof1 - Intr or isoc transaction proceeds past EOF1. - near eof - Intr or isoc transaction would not fit inside the frame. - zout transfer - If zout transfer for a bulk endpoint (EP disabled). - setup transfer - If setup transfer for a non-ctrl endpoint (EP disabled). */ - - int epid; - - - DBFENTER; - - assert(reg != NULL); - - /* Note that we loop through all epids. We still want to catch errors for - the invalid one, even though we might handle them differently. */ - for (epid = 0; epid < NBR_OF_EPIDS; epid++) { - - if (test_bit(epid, (void *)®->r_usb_epid_attn)) { - - struct urb *urb; - __u32 r_usb_ept_data; - unsigned long flags; - int error_code; - - save_flags(flags); - cli(); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); - nop(); - /* Note that although there are separate R_USB_EPT_DATA and R_USB_EPT_DATA_ISO - registers, they are located at the same address and are of the same size. - In other words, this read should be ok for isoc also. */ - r_usb_ept_data = *R_USB_EPT_DATA; - restore_flags(flags); - - /* First some sanity checks. */ - if (epid == INVALID_EPID) { - /* FIXME: What if it became disabled? Could seriously hurt interrupt - traffic. (Use do_intr_recover.) */ - warn("Got epid_attn for INVALID_EPID (%d).", epid); - err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); - err("R_USB_STATUS = 0x%x", reg->r_usb_status); - continue; - } else if (epid == DUMMY_EPID) { - /* We definitely don't care about these ones. Besides, they are - always disabled, so any possible disabling caused by the - epid attention interrupt is irrelevant. */ - warn("Got epid_attn for DUMMY_EPID (%d).", epid); - continue; - } - - /* Get the first urb in the urb list for this epid. We blatantly assume - that only the first urb could have caused the epid attention. - (For bulk and ctrl, only one urb is active at any one time. For intr - and isoc we remove them once they are completed.) */ - urb = urb_list_first(epid); - - if (urb == NULL) { - err("Got epid_attn for epid %i with no urb.", epid); - err("R_USB_EPT_DATA = 0x%x", r_usb_ept_data); - err("R_USB_STATUS = 0x%x", reg->r_usb_status); - continue; - } - - switch (usb_pipetype(urb->pipe)) { - case PIPE_BULK: - warn("Got epid attn for bulk endpoint, epid %d", epid); - break; - case PIPE_CONTROL: - warn("Got epid attn for control endpoint, epid %d", epid); - break; - case PIPE_INTERRUPT: - warn("Got epid attn for interrupt endpoint, epid %d", epid); - break; - case PIPE_ISOCHRONOUS: - warn("Got epid attn for isochronous endpoint, epid %d", epid); - break; - } - - if (usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) { - if (r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, hold)) { - warn("Hold was set for epid %d.", epid); - continue; - } - } - - /* Even though error_code occupies bits 22 - 23 in both R_USB_EPT_DATA and - R_USB_EPT_DATA_ISOC, we separate them here so we don't forget in other places. */ - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - error_code = IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data); - } else { - error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, r_usb_ept_data); - } - - /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ - if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { - - /* Isoc traffic doesn't have error_count_in/error_count_out. */ - if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && - (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, r_usb_ept_data) == 3 || - IO_EXTRACT(R_USB_EPT_DATA, error_count_out, r_usb_ept_data) == 3)) { - /* 3rd error. */ - warn("3rd error for epid %i", epid); - etrax_usb_complete_urb(urb, -EPROTO); - - } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { - - warn("Perror for epid %d", epid); - - if (!(r_usb_ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { - /* invalid ep_id */ - panic("Perror because of invalid epid." - " Deconfigured too early?"); - } else { - /* past eof1, near eof, zout transfer, setup transfer */ - - /* Dump the urb and the relevant EP descriptor list. */ - - __dump_urb(urb); - __dump_ept_data(epid); - __dump_ep_list(usb_pipetype(urb->pipe)); - - panic("Something wrong with DMA descriptor contents." - " Too much traffic inserted?"); - } - } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { - /* buffer ourun */ - panic("Buffer overrun/underrun for epid %d. DMA too busy?", epid); - } - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, stall)) { - /* Not really a protocol error, just says that the endpoint gave - a stall response. Note that error_code cannot be stall for isoc. */ - if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { - panic("Isoc traffic cannot stall"); - } - - warn("Stall for epid %d", epid); - etrax_usb_complete_urb(urb, -EPIPE); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, bus_error)) { - /* Two devices responded to a transaction request. Must be resolved - by software. FIXME: Reset ports? */ - panic("Bus error for epid %d." - " Two devices responded to transaction request", - epid); - - } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, buffer_error)) { - /* DMA overrun or underrun. */ - warn("Buffer overrun/underrun for epid %d. DMA too busy?", epid); - - /* It seems that error_code = buffer_error in - R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS - are the same error. */ - etrax_usb_complete_urb(urb, -EPROTO); - } - } - } - - DBFEXIT; - -} - -void etrax_usb_bulk_start_timer_func(unsigned long dummy) -{ - - /* We might enable an EP descriptor behind the current DMA position when it's about - to decide that there are no more bulk traffic and it should stop the bulk channel. - Therefore we periodically check if the bulk channel is stopped and there is an - enabled bulk EP descriptor, in which case we start the bulk channel. */ - dbg_bulk("bulk_start_timer timed out."); - - if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { - int epid; - - dbg_bulk("Bulk DMA channel not running."); - - for (epid = 0; epid < NBR_OF_EPIDS; epid++) { - if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { - dbg_bulk("Found enabled EP for epid %d, starting bulk channel.\n", - epid); - *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); - - /* Restart the bulk eot timer since we just started the bulk channel. */ - mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); - - /* No need to search any further. */ - break; - } - } - } else { - dbg_bulk("Bulk DMA channel running."); - } -} - -void etrax_usb_hc_port_status_interrupt(usb_interrupt_registers_t *reg) -{ - etrax_hc_t *hc = reg->hc; - __u16 r_usb_rh_port_status_1 = reg->r_usb_rh_port_status_1; - __u16 r_usb_rh_port_status_2 = reg->r_usb_rh_port_status_2; - - DBFENTER; - - /* The Etrax RH does not include a wPortChange register, so this has to be handled in software - (by saving the old port status value for comparison when the port status interrupt happens). - See section 11.16.2.6.2 in the USB 1.1 spec for details. */ - - dbg_rh("hc->rh.prev_wPortStatus_1 = 0x%x", hc->rh.prev_wPortStatus_1); - dbg_rh("hc->rh.prev_wPortStatus_2 = 0x%x", hc->rh.prev_wPortStatus_2); - dbg_rh("r_usb_rh_port_status_1 = 0x%x", r_usb_rh_port_status_1); - dbg_rh("r_usb_rh_port_status_2 = 0x%x", r_usb_rh_port_status_2); - - /* C_PORT_CONNECTION is set on any transition. */ - hc->rh.wPortChange_1 |= - ((r_usb_rh_port_status_1 & (1 << RH_PORT_CONNECTION)) != - (hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_CONNECTION))) ? - (1 << RH_PORT_CONNECTION) : 0; - - hc->rh.wPortChange_2 |= - ((r_usb_rh_port_status_2 & (1 << RH_PORT_CONNECTION)) != - (hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_CONNECTION))) ? - (1 << RH_PORT_CONNECTION) : 0; - - /* C_PORT_ENABLE is _only_ set on a one to zero transition, i.e. when - the port is disabled, not when it's enabled. */ - hc->rh.wPortChange_1 |= - ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_ENABLE)) - && !(r_usb_rh_port_status_1 & (1 << RH_PORT_ENABLE))) ? - (1 << RH_PORT_ENABLE) : 0; - - hc->rh.wPortChange_2 |= - ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_ENABLE)) - && !(r_usb_rh_port_status_2 & (1 << RH_PORT_ENABLE))) ? - (1 << RH_PORT_ENABLE) : 0; - - /* C_PORT_SUSPEND is set to one when the device has transitioned out - of the suspended state, i.e. when suspend goes from one to zero. */ - hc->rh.wPortChange_1 |= - ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_SUSPEND)) - && !(r_usb_rh_port_status_1 & (1 << RH_PORT_SUSPEND))) ? - (1 << RH_PORT_SUSPEND) : 0; - - hc->rh.wPortChange_2 |= - ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_SUSPEND)) - && !(r_usb_rh_port_status_2 & (1 << RH_PORT_SUSPEND))) ? - (1 << RH_PORT_SUSPEND) : 0; - - - /* C_PORT_RESET is set when reset processing on this port is complete. */ - hc->rh.wPortChange_1 |= - ((hc->rh.prev_wPortStatus_1 & (1 << RH_PORT_RESET)) - && !(r_usb_rh_port_status_1 & (1 << RH_PORT_RESET))) ? - (1 << RH_PORT_RESET) : 0; - - hc->rh.wPortChange_2 |= - ((hc->rh.prev_wPortStatus_2 & (1 << RH_PORT_RESET)) - && !(r_usb_rh_port_status_2 & (1 << RH_PORT_RESET))) ? - (1 << RH_PORT_RESET) : 0; - - /* Save the new values for next port status change. */ - hc->rh.prev_wPortStatus_1 = r_usb_rh_port_status_1; - hc->rh.prev_wPortStatus_2 = r_usb_rh_port_status_2; - - dbg_rh("hc->rh.wPortChange_1 set to 0x%x", hc->rh.wPortChange_1); - dbg_rh("hc->rh.wPortChange_2 set to 0x%x", hc->rh.wPortChange_2); - - DBFEXIT; - -} - -void etrax_usb_hc_ctl_status_interrupt(usb_interrupt_registers_t *reg) -{ - DBFENTER; - - /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB - list for the corresponding epid? */ - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { - panic("USB controller got ourun."); - } - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { - - /* Before, etrax_usb_do_intr_recover was called on this epid if it was - an interrupt pipe. I don't see how re-enabling all EP descriptors - will help if there was a programming error. */ - panic("USB controller got perror."); - } - - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { - /* We should never operate in device mode. */ - panic("USB controller in device mode."); - } - - /* These if-statements could probably be nested. */ - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, host_mode)) { - info("USB controller in host mode."); - } - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, started)) { - info("USB controller started."); - } - if (reg->r_usb_status & IO_MASK(R_USB_STATUS, running)) { - info("USB controller running."); - } - - DBFEXIT; - -} - - -static int etrax_rh_submit_urb(struct urb *urb) -{ - struct usb_device *usb_dev = urb->dev; - etrax_hc_t *hc = usb_dev->bus->hcpriv; - unsigned int pipe = urb->pipe; - struct usb_ctrlrequest *cmd = (struct usb_ctrlrequest *) urb->setup_packet; - void *data = urb->transfer_buffer; - int leni = urb->transfer_buffer_length; - int len = 0; - int stat = 0; - - __u16 bmRType_bReq; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - - DBFENTER; - - /* FIXME: What is this interrupt urb that is sent to the root hub? */ - if (usb_pipetype (pipe) == PIPE_INTERRUPT) { - dbg_rh("Root-Hub submit IRQ: every %d ms", urb->interval); - hc->rh.urb = urb; - hc->rh.send = 1; - /* FIXME: We could probably remove this line since it's done - in etrax_rh_init_int_timer. (Don't remove it from - etrax_rh_init_int_timer though.) */ - hc->rh.interval = urb->interval; - etrax_rh_init_int_timer(urb); - DBFEXIT; - - return 0; - } - - bmRType_bReq = cmd->bRequestType | (cmd->bRequest << 8); - wValue = le16_to_cpu(cmd->wValue); - wIndex = le16_to_cpu(cmd->wIndex); - wLength = le16_to_cpu(cmd->wLength); - - dbg_rh("bmRType_bReq : 0x%04x (%d)", bmRType_bReq, bmRType_bReq); - dbg_rh("wValue : 0x%04x (%d)", wValue, wValue); - dbg_rh("wIndex : 0x%04x (%d)", wIndex, wIndex); - dbg_rh("wLength : 0x%04x (%d)", wLength, wLength); - - switch (bmRType_bReq) { - - /* Request Destination: - without flags: Device, - RH_INTERFACE: interface, - RH_ENDPOINT: endpoint, - RH_CLASS means HUB here, - RH_OTHER | RH_CLASS almost ever means HUB_PORT here - */ - - case RH_GET_STATUS: - *(__u16 *) data = cpu_to_le16 (1); - OK (2); - - case RH_GET_STATUS | RH_INTERFACE: - *(__u16 *) data = cpu_to_le16 (0); - OK (2); - - case RH_GET_STATUS | RH_ENDPOINT: - *(__u16 *) data = cpu_to_le16 (0); - OK (2); - - case RH_GET_STATUS | RH_CLASS: - *(__u32 *) data = cpu_to_le32 (0); - OK (4); /* hub power ** */ - - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - if (wIndex == 1) { - *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_1); - *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_1); - } else if (wIndex == 2) { - *((__u16*)data) = cpu_to_le16(hc->rh.prev_wPortStatus_2); - *((__u16*)data + 1) = cpu_to_le16(hc->rh.wPortChange_2); - } else { - dbg_rh("RH_GET_STATUS whith invalid wIndex!"); - OK(0); - } - - OK(4); - - case RH_CLEAR_FEATURE | RH_ENDPOINT: - switch (wValue) { - case (RH_ENDPOINT_STALL): - OK (0); - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - switch (wValue) { - case (RH_C_HUB_OVER_CURRENT): - OK (0); /* hub power over current ** */ - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_ENABLE): - if (wIndex == 1) { - - dbg_rh("trying to do disable port 1"); - - *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); - - while (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)); - *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); - dbg_rh("Port 1 is disabled"); - - } else if (wIndex == 2) { - - dbg_rh("trying to do disable port 2"); - - *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); - - while (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes)); - *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); - dbg_rh("Port 2 is disabled"); - - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_PORT_ENABLE " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_PORT_SUSPEND): - /* Opposite to suspend should be resume, so we'll do a resume. */ - /* FIXME: USB 1.1, 11.16.2.2 says: - "Clearing the PORT_SUSPEND feature causes a host-initiated resume - on the specified port. If the port is not in the Suspended state, - the hub should treat this request as a functional no-operation." - Shouldn't we check if the port is in a suspended state before - resuming? */ - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - if (wIndex == 1) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port1) | - IO_STATE(R_USB_COMMAND, port_cmd, resume) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else if (wIndex == 2) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port2) | - IO_STATE(R_USB_COMMAND, port_cmd, resume) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_PORT_SUSPEND " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_PORT_POWER): - OK (0); /* port power ** */ - case (RH_C_PORT_CONNECTION): - if (wIndex == 1) { - hc->rh.wPortChange_1 &= ~(1 << RH_PORT_CONNECTION); - } else if (wIndex == 2) { - hc->rh.wPortChange_2 &= ~(1 << RH_PORT_CONNECTION); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_CONNECTION " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_C_PORT_ENABLE): - if (wIndex == 1) { - hc->rh.wPortChange_1 &= ~(1 << RH_PORT_ENABLE); - } else if (wIndex == 2) { - hc->rh.wPortChange_2 &= ~(1 << RH_PORT_ENABLE); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_ENABLE " - "with invalid wIndex == %d!", wIndex); - } - OK (0); - case (RH_C_PORT_SUSPEND): -/*** WR_RH_PORTSTAT(RH_PS_PSSC); */ - OK (0); - case (RH_C_PORT_OVER_CURRENT): - OK (0); /* port power over current ** */ - case (RH_C_PORT_RESET): - if (wIndex == 1) { - hc->rh.wPortChange_1 &= ~(1 << RH_PORT_RESET); - } else if (wIndex == 2) { - hc->rh.wPortChange_2 &= ~(1 << RH_PORT_RESET); - } else { - dbg_rh("RH_CLEAR_FEATURE->RH_C_PORT_RESET " - "with invalid index == %d!", wIndex); - } - - OK (0); - - } - break; - - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_SUSPEND): - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - if (wIndex == 1) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port1) | - IO_STATE(R_USB_COMMAND, port_cmd, suspend) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else if (wIndex == 2) { - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port2) | - IO_STATE(R_USB_COMMAND, port_cmd, suspend) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - } else { - dbg_rh("RH_SET_FEATURE->RH_PORT_SUSPEND " - "with invalid wIndex == %d!", wIndex); - } - - OK (0); - case (RH_PORT_RESET): - if (wIndex == 1) { - - port_1_reset: - dbg_rh("Doing reset of port 1"); - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port1) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - - /* We must wait at least 10 ms for the device to recover. - 15 ms should be enough. */ - udelay(15000); - - /* Wait for reset bit to go low (should be done by now). */ - while (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)); - - /* If the port status is - 1) connected and enabled then there is a device and everything is fine - 2) neither connected nor enabled then there is no device, also fine - 3) connected and not enabled then we try again - (Yes, there are other port status combinations besides these.) */ - - if ((hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && - (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { - dbg_rh("Connected device on port 1, but port not enabled?" - " Trying reset again."); - goto port_2_reset; - } - - /* Diagnostic printouts. */ - if ((hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, connected, no)) && - (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no))) { - dbg_rh("No connected device on port 1"); - } else if ((hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) && - (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes))) { - dbg_rh("Connected device on port 1, port 1 enabled"); - } - - } else if (wIndex == 2) { - - port_2_reset: - dbg_rh("Doing reset of port 2"); - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Issue the reset command. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, port2) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, nop); - - /* We must wait at least 10 ms for the device to recover. - 15 ms should be enough. */ - udelay(15000); - - /* Wait for reset bit to go low (should be done by now). */ - while (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, reset, yes)); - - /* If the port status is - 1) connected and enabled then there is a device and everything is fine - 2) neither connected nor enabled then there is no device, also fine - 3) connected and not enabled then we try again - (Yes, there are other port status combinations besides these.) */ - - if ((hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && - (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { - dbg_rh("Connected device on port 2, but port not enabled?" - " Trying reset again."); - goto port_2_reset; - } - - /* Diagnostic printouts. */ - if ((hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, connected, no)) && - (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no))) { - dbg_rh("No connected device on port 2"); - } else if ((hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, connected, yes)) && - (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, yes))) { - dbg_rh("Connected device on port 2, port 2 enabled"); - } - - } else { - dbg_rh("RH_SET_FEATURE->RH_PORT_RESET with invalid wIndex = %d", wIndex); - } - - /* Make sure the controller isn't busy. */ - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* If all enabled ports were disabled the host controller goes down into - started mode, so we need to bring it back into the running state. - (This is safe even if it's already in the running state.) */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); - - dbg_rh("...Done"); - OK(0); - - case (RH_PORT_POWER): - OK (0); /* port power ** */ - case (RH_PORT_ENABLE): - /* There is no port enable command in the host controller, so if the - port is already enabled, we do nothing. If not, we reset the port - (with an ugly goto). */ - - if (wIndex == 1) { - if (hc->rh.prev_wPortStatus_1 & - IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, no)) { - goto port_1_reset; - } - } else if (wIndex == 2) { - if (hc->rh.prev_wPortStatus_2 & - IO_STATE(R_USB_RH_PORT_STATUS_2, enabled, no)) { - goto port_2_reset; - } - } else { - dbg_rh("RH_SET_FEATURE->RH_GET_STATUS with invalid wIndex = %d", wIndex); - } - OK (0); - } - break; - - case RH_SET_ADDRESS: - hc->rh.devnum = wValue; - dbg_rh("RH address set to: %d", hc->rh.devnum); - OK (0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case (0x01): /* device descriptor */ - len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_dev_des), wLength)); - memcpy (data, root_hub_dev_des, len); - OK (len); - case (0x02): /* configuration descriptor */ - len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_config_des), wLength)); - memcpy (data, root_hub_config_des, len); - OK (len); - case (0x03): /* string descriptors */ - len = usb_root_hub_string (wValue & 0xff, - 0xff, "ETRAX 100LX", - data, wLength); - if (len > 0) { - OK(min(leni, len)); - } else { - stat = -EPIPE; - } - - } - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - root_hub_hub_des[2] = hc->rh.numports; - len = min_t(unsigned int, leni, min_t(unsigned int, sizeof (root_hub_hub_des), wLength)); - memcpy (data, root_hub_hub_des, len); - OK (len); - - case RH_GET_CONFIGURATION: - *(__u8 *) data = 0x01; - OK (1); - - case RH_SET_CONFIGURATION: - OK (0); - - default: - stat = -EPIPE; - } - - urb->actual_length = len; - urb->status = stat; - urb->dev = NULL; - if (urb->complete) { - urb->complete(urb, NULL); - } - DBFEXIT; - - return 0; -} - -static void -etrax_usb_bulk_eot_timer_func(unsigned long dummy) -{ - /* Because of a race condition in the top half, we might miss a bulk eot. - This timer "simulates" a bulk eot if we don't get one for a while, hopefully - correcting the situation. */ - dbg_bulk("bulk_eot_timer timed out."); - etrax_usb_hc_bulk_eot_interrupt(1); -} - -static void* -etrax_usb_buffer_alloc(struct usb_bus* bus, size_t size, - unsigned mem_flags, dma_addr_t *dma) -{ - return kmalloc(size, mem_flags); -} - -static void -etrax_usb_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma) -{ - kfree(addr); -} - - -static struct device fake_device; - -static int __init etrax_usb_hc_init(void) -{ - static etrax_hc_t *hc; - struct usb_bus *bus; - struct usb_device *usb_rh; - int i; - - DBFENTER; - - info("ETRAX 100LX USB-HCD %s (c) 2001-2003 Axis Communications AB\n", usb_hcd_version); - - hc = kmalloc(sizeof(etrax_hc_t), GFP_KERNEL); - assert(hc != NULL); - - /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ - /* Note that we specify sizeof(USB_EP_Desc_t) as the size, but also allocate - SB descriptors from this cache. This is ok since sizeof(USB_EP_Desc_t) == - sizeof(USB_SB_Desc_t). */ - - usb_desc_cache = kmem_cache_create("usb_desc_cache", sizeof(USB_EP_Desc_t), 0, - SLAB_HWCACHE_ALIGN, 0, 0); - assert(usb_desc_cache != NULL); - - top_half_reg_cache = kmem_cache_create("top_half_reg_cache", - sizeof(usb_interrupt_registers_t), - 0, SLAB_HWCACHE_ALIGN, 0, 0); - assert(top_half_reg_cache != NULL); - - isoc_compl_cache = kmem_cache_create("isoc_compl_cache", - sizeof(usb_isoc_complete_data_t), - 0, SLAB_HWCACHE_ALIGN, 0, 0); - assert(isoc_compl_cache != NULL); - - etrax_usb_bus = bus = usb_alloc_bus(&etrax_usb_device_operations); - hc->bus = bus; - bus->bus_name="ETRAX 100LX"; - bus->hcpriv = hc; - - /* Initialize RH to the default address. - And make sure that we have no status change indication */ - hc->rh.numports = 2; /* The RH has two ports */ - hc->rh.devnum = 1; - hc->rh.wPortChange_1 = 0; - hc->rh.wPortChange_2 = 0; - - /* Also initate the previous values to zero */ - hc->rh.prev_wPortStatus_1 = 0; - hc->rh.prev_wPortStatus_2 = 0; - - /* Initialize the intr-traffic flags */ - /* FIXME: This isn't used. (Besides, the error field isn't initialized.) */ - hc->intr.sleeping = 0; - hc->intr.wq = NULL; - - epid_usage_bitmask = 0; - epid_out_traffic = 0; - - /* Mark the invalid epid as being used. */ - set_bit(INVALID_EPID, (void *)&epid_usage_bitmask); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, INVALID_EPID); - nop(); - /* The valid bit should still be set ('invalid' is in our world; not the hardware's). */ - *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, yes) | - IO_FIELD(R_USB_EPT_DATA, max_len, 1)); - - /* Mark the dummy epid as being used. */ - set_bit(DUMMY_EPID, (void *)&epid_usage_bitmask); - *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, DUMMY_EPID); - nop(); - *R_USB_EPT_DATA = (IO_STATE(R_USB_EPT_DATA, valid, no) | - IO_FIELD(R_USB_EPT_DATA, max_len, 1)); - - /* Initialize the urb list by initiating a head for each list. */ - for (i = 0; i < NBR_OF_EPIDS; i++) { - INIT_LIST_HEAD(&urb_list[i]); - } - spin_lock_init(&urb_list_lock); - - INIT_LIST_HEAD(&urb_unlink_list); - - - /* Initiate the bulk start timer. */ - init_timer(&bulk_start_timer); - bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; - bulk_start_timer.function = etrax_usb_bulk_start_timer_func; - add_timer(&bulk_start_timer); - - - /* Initiate the bulk eot timer. */ - init_timer(&bulk_eot_timer); - bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; - bulk_eot_timer.function = etrax_usb_bulk_eot_timer_func; - add_timer(&bulk_eot_timer); - - /* Set up the data structures for USB traffic. Note that this must be done before - any interrupt that relies on sane DMA list occurrs. */ - init_rx_buffers(); - init_tx_bulk_ep(); - init_tx_ctrl_ep(); - init_tx_intr_ep(); - init_tx_isoc_ep(); - - device_initialize(&fake_device); - kobject_set_name(&fake_device.kobj, "etrax_usb"); - kobject_add(&fake_device.kobj); - kobject_uevent(&fake_device.kobj, KOBJ_ADD); - hc->bus->controller = &fake_device; - usb_register_bus(hc->bus); - - *R_IRQ_MASK2_SET = - /* Note that these interrupts are not used. */ - IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | - /* Sub channel 1 (ctrl) descr. interrupts are used. */ - IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | - IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | - /* Sub channel 3 (isoc) descr. interrupts are used. */ - IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); - - /* Note that the dma9_descr interrupt is not used. */ - *R_IRQ_MASK2_SET = - IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | - IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); - - /* FIXME: Enable iso_eof only when isoc traffic is running. */ - *R_USB_IRQ_MASK_SET = - IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | - IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | - IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | - IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | - IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); - - - if (request_irq(ETRAX_USB_HC_IRQ, etrax_usb_hc_interrupt_top_half, 0, - "ETRAX 100LX built-in USB (HC)", hc)) { - err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); - etrax_usb_hc_cleanup(); - DBFEXIT; - return -1; - } - - if (request_irq(ETRAX_USB_RX_IRQ, etrax_usb_rx_interrupt, 0, - "ETRAX 100LX built-in USB (Rx)", hc)) { - err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); - etrax_usb_hc_cleanup(); - DBFEXIT; - return -1; - } - - if (request_irq(ETRAX_USB_TX_IRQ, etrax_usb_tx_interrupt, 0, - "ETRAX 100LX built-in USB (Tx)", hc)) { - err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); - etrax_usb_hc_cleanup(); - DBFEXIT; - return -1; - } - - /* R_USB_COMMAND: - USB commands in host mode. The fields in this register should all be - written to in one write. Do not read-modify-write one field at a time. A - write to this register will trigger events in the USB controller and an - incomplete command may lead to unpredictable results, and in worst case - even to a deadlock in the controller. - (Note however that the busy field is read-only, so no need to write to it.) */ - - /* Check the busy bit before writing to R_USB_COMMAND. */ - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Reset the USB interface. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); - - /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to 0x2A30 (10800), - to guarantee that control traffic gets 10% of the bandwidth, and periodic transfer may - allocate the rest (90%). This doesn't work though. Read on for a lenghty explanation. - - While there is a difference between rev. 2 and rev. 3 of the ETRAX 100LX regarding the NAK - behaviour, it doesn't solve this problem. What happens is that a control transfer will not - be interrupted in its data stage when PSTART happens (the point at which periodic traffic - is started). Thus, if PSTART is set to 10800 and its IN or OUT token is NAKed until just before - PSTART happens, it will continue the IN/OUT transfer as long as it's ACKed. After it's done, - there may be too little time left for an isochronous transfer, causing an epid attention - interrupt due to perror. The work-around for this is to let the control transfers run at the - end of the frame instead of at the beginning, and will be interrupted just fine if it doesn't - fit into the frame. However, since there will *always* be a control transfer at the beginning - of the frame, regardless of what we set PSTART to, that transfer might be a 64-byte transfer - which consumes up to 15% of the frame, leaving only 85% for periodic traffic. The solution to - this would be to 'dummy allocate' 5% of the frame with the usb_claim_bandwidth function to make - sure that the periodic transfers that are inserted will always fit in the frame. - - The idea was suggested that a control transfer could be split up into several 8 byte transfers, - so that it would be interrupted by PSTART, but since this can't be done for an IN transfer this - hasn't been implemented. - - The value 11960 is chosen to be just after the SOF token, with a couple of bit times extra - for possible bit stuffing. */ - - *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); - -#ifdef CONFIG_ETRAX_USB_HOST_PORT1 - *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -#endif - -#ifdef CONFIG_ETRAX_USB_HOST_PORT2 - *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); -#endif - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Configure the USB interface as a host controller. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); - - /* Note: Do not reset any ports here. Await the port status interrupts, to have a controlled - sequence of resetting the ports. If we reset both ports now, and there are devices - on both ports, we will get a bus error because both devices will answer the set address - request. */ - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - /* Start processing of USB traffic. */ - *R_USB_COMMAND = - IO_STATE(R_USB_COMMAND, port_sel, nop) | - IO_STATE(R_USB_COMMAND, port_cmd, reset) | - IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); - - while (*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)); - - usb_rh = usb_alloc_dev(NULL, hc->bus, 0); - hc->bus->root_hub = usb_rh; - usb_rh->state = USB_STATE_ADDRESS; - usb_rh->speed = USB_SPEED_FULL; - usb_rh->devnum = 1; - hc->bus->devnum_next = 2; - usb_rh->ep0.desc.wMaxPacketSize = __const_cpu_to_le16(64); - usb_get_device_descriptor(usb_rh, USB_DT_DEVICE_SIZE); - usb_new_device(usb_rh); - - DBFEXIT; - - return 0; -} - -static void etrax_usb_hc_cleanup(void) -{ - DBFENTER; - - free_irq(ETRAX_USB_HC_IRQ, NULL); - free_irq(ETRAX_USB_RX_IRQ, NULL); - free_irq(ETRAX_USB_TX_IRQ, NULL); - - usb_deregister_bus(etrax_usb_bus); - - /* FIXME: call kmem_cache_destroy here? */ - - DBFEXIT; -} - -module_init(etrax_usb_hc_init); -module_exit(etrax_usb_hc_cleanup); diff --git a/target/linux/etrax/patches-2.6.25/301-usb_support.patch b/target/linux/etrax/patches-2.6.25/301-usb_support.patch index 51de789fa1..a1c2830040 100644 --- a/target/linux/etrax/patches-2.6.25/301-usb_support.patch +++ b/target/linux/etrax/patches-2.6.25/301-usb_support.patch @@ -1,5301 +1,33 @@ ---- a/drivers/usb/Makefile -+++ b/drivers/usb/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ +diff -Naur linux-2.6.26/drivers/usb/host/Makefile os/linux-2.6-tag--devboard-R2_20-5/drivers/usb/host/Makefile +--- linux-2.6.26/drivers/usb/host/Makefile 2008-07-13 23:51:29.000000000 +0200 ++++ os/linux-2.6-tag--devboard-R2_20-5/drivers/usb/host/Makefile 2008-08-21 10:39:44.000000000 +0200 +@@ -16,6 +16,7 @@ + obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o + obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o + obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o ++obj-$(CONFIG_ETRAX_ARCH_V10) += hc-crisv10.o + obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o + obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o +diff -Naur linux-2.6.26/drivers/usb/Kconfig os/linux-2.6-tag--devboard-R2_20-5/drivers/usb/Kconfig +--- linux-2.6.26/drivers/usb/Kconfig 2008-07-13 23:51:29.000000000 +0200 ++++ os/linux-2.6-tag--devboard-R2_20-5/drivers/usb/Kconfig 2008-06-10 11:18:30.000000000 +0200 +@@ -21,6 +21,7 @@ + default y if USB_ARCH_HAS_EHCI + default y if PCMCIA && !M32R # sl811_cs + default y if ARM # SL-811 ++ default y if ETRAXFS + default y if SUPERH # r8a66597-hcd + default PCI + +diff -Naur linux-2.6.26/drivers/usb/Makefile os/linux-2.6-tag--devboard-R2_20-5/drivers/usb/Makefile +--- linux-2.6.26/drivers/usb/Makefile 2008-07-13 23:51:29.000000000 +0200 ++++ os/linux-2.6-tag--devboard-R2_20-5/drivers/usb/Makefile 2008-10-01 10:56:43.000000000 +0200 +@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ +obj-$(CONFIG_ETRAX_USB_HOST) += host/ - obj-$(CONFIG_USB_ACM) += class/ - obj-$(CONFIG_USB_PRINTER) += class/ ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -17,3 +17,5 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o - obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o - obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o + obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ -+#obj-$(CONFIG_USB_CARNEOL) += hc-crisv10.o -+obj-$(CONFIG_ETRAX_USB_HOST) += hc-crisv10.o ---- /dev/null -+++ b/drivers/usb/host/hc-cris-dbg.h -@@ -0,0 +1,143 @@ -+ -+/* macros for debug output */ -+ -+#define hcd_dbg(hcd, fmt, args...) \ -+ dev_info(hcd->self.controller, fmt, ## args) -+#define hcd_err(hcd, fmt, args...) \ -+ dev_err(hcd->self.controller, fmt, ## args) -+#define hcd_info(hcd, fmt, args...) \ -+ dev_info(hcd->self.controller, fmt, ## args) -+#define hcd_warn(hcd, fmt, args...) \ -+ dev_warn(hcd->self.controller, fmt, ## args) -+ -+/* -+#define devdrv_dbg(fmt, args...) \ -+ printk(KERN_INFO "usb_devdrv dbg: ");printk(fmt, ## args) -+*/ -+#define devdrv_dbg(fmt, args...) {} -+ -+#define devdrv_err(fmt, args...) \ -+ printk(KERN_ERR "usb_devdrv error: ");printk(fmt, ## args) -+#define devdrv_info(fmt, args...) \ -+ printk(KERN_INFO "usb_devdrv: ");printk(fmt, ## args) -+ -+#define irq_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_irq dbg: ");printk(fmt, ## args) -+#define irq_err(fmt, args...) \ -+ printk(KERN_ERR "crisv10_irq error: ");printk(fmt, ## args) -+#define irq_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_irq warn: ");printk(fmt, ## args) -+#define irq_info(fmt, args...) \ -+ printk(KERN_INFO "crisv10_hcd: ");printk(fmt, ## args) -+ -+/* -+#define rh_dbg(fmt, args...) \ -+ printk(KERN_DEBUG "crisv10_rh dbg: ");printk(fmt, ## args) -+*/ -+#define rh_dbg(fmt, args...) {} -+ -+#define rh_err(fmt, args...) \ -+ printk(KERN_ERR "crisv10_rh error: ");printk(fmt, ## args) -+#define rh_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_rh warning: ");printk(fmt, ## args) -+#define rh_info(fmt, args...) \ -+ printk(KERN_INFO "crisv10_rh: ");printk(fmt, ## args) -+ -+/* -+#define tc_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_tc dbg: ");printk(fmt, ## args) -+*/ -+#define tc_dbg(fmt, args...) {while(0){}} -+ -+#define tc_err(fmt, args...) \ -+ printk(KERN_ERR "crisv10_tc error: ");printk(fmt, ## args) -+/* -+#define tc_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_tc warning: ");printk(fmt, ## args) -+*/ -+#define tc_warn(fmt, args...) {while(0){}} -+ -+#define tc_info(fmt, args...) \ -+ printk(KERN_INFO "crisv10_tc: ");printk(fmt, ## args) -+ -+ -+/* Debug print-outs for various traffic types */ -+ -+#define intr_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_intr warning: ");printk(fmt, ## args) -+ -+#define intr_dbg(fmt, args...) \ -+ printk(KERN_DEBUG "crisv10_intr dbg: ");printk(fmt, ## args) -+/* -+#define intr_dbg(fmt, args...) {while(0){}} -+*/ -+ -+ -+#define isoc_err(fmt, args...) \ -+ printk(KERN_ERR "crisv10_isoc error: ");printk(fmt, ## args) -+/* -+#define isoc_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_isoc warning: ");printk(fmt, ## args) -+*/ -+#define isoc_warn(fmt, args...) {while(0){}} -+ -+/* -+#define isoc_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_isoc dbg: ");printk(fmt, ## args) -+*/ -+#define isoc_dbg(fmt, args...) {while(0){}} -+ -+/* -+#define timer_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_timer warning: ");printk(fmt, ## args) -+*/ -+#define timer_warn(fmt, args...) {while(0){}} -+ -+/* -+#define timer_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_timer dbg: ");printk(fmt, ## args) -+*/ -+#define timer_dbg(fmt, args...) {while(0){}} -+ -+ -+/* Debug printouts for events related to late finishing of URBs */ -+ -+#define late_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_late dbg: ");printk(fmt, ## args) -+/* -+#define late_dbg(fmt, args...) {while(0){}} -+*/ -+ -+#define late_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_late warning: ");printk(fmt, ## args) -+/* -+#define errno_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_errno dbg: ");printk(fmt, ## args) -+*/ -+#define errno_dbg(fmt, args...) {while(0){}} -+ -+ -+#define dma_dbg(fmt, args...) \ -+ printk(KERN_INFO "crisv10_dma dbg: ");printk(fmt, ## args) -+#define dma_err(fmt, args...) \ -+ printk(KERN_ERR "crisv10_dma error: ");printk(fmt, ## args) -+#define dma_warn(fmt, args...) \ -+ printk(KERN_INFO "crisv10_dma warning: ");printk(fmt, ## args) -+#define dma_info(fmt, args...) \ -+ printk(KERN_INFO "crisv10_dma: ");printk(fmt, ## args) -+ -+ -+ -+#define str_dir(pipe) \ -+ (usb_pipeout(pipe) ? "out" : "in") -+#define str_type(pipe) \ -+ ({ \ -+ char *s = "?"; \ -+ switch (usb_pipetype(pipe)) { \ -+ case PIPE_ISOCHRONOUS: s = "iso"; break; \ -+ case PIPE_INTERRUPT: s = "intr"; break; \ -+ case PIPE_CONTROL: s = "ctrl"; break; \ -+ case PIPE_BULK: s = "bulk"; break; \ -+ }; \ -+ s; \ -+ }) ---- /dev/null -+++ b/drivers/usb/host/hc-crisv10.c -@@ -0,0 +1,4800 @@ -+/* -+ * -+ * ETRAX 100LX USB Host Controller Driver -+ * -+ * Copyright (C) 2005, 2006 Axis Communications AB -+ * -+ * Author: Konrad Eriksson -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+ -+#include "../core/hcd.h" -+#include "../core/hub.h" -+#include "hc-crisv10.h" -+#include "hc-cris-dbg.h" -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Host Controller settings */ -+/***************************************************************************/ -+/***************************************************************************/ -+ -+#define VERSION "1.00 hinko.4" -+#define COPYRIGHT "(c) 2005, 2006 Axis Communications AB" -+#define DESCRIPTION "ETRAX 100LX USB Host Controller (2.6.25-rc9 port)" -+ -+#define ETRAX_USB_HC_IRQ USB_HC_IRQ_NBR -+#define ETRAX_USB_RX_IRQ USB_DMA_RX_IRQ_NBR -+#define ETRAX_USB_TX_IRQ USB_DMA_TX_IRQ_NBR -+ -+/* Number of physical ports in Etrax 100LX */ -+#define USB_ROOT_HUB_PORTS 2 -+ -+const char hc_name[] = "hc-crisv10"; -+const char product_desc[] = DESCRIPTION; -+ -+/* The number of epids is, among other things, used for pre-allocating -+ ctrl, bulk and isoc EP descriptors (one for each epid). -+ Assumed to be > 1 when initiating the DMA lists. */ -+#define NBR_OF_EPIDS 32 -+ -+/* Support interrupt traffic intervals up to 128 ms. */ -+#define MAX_INTR_INTERVAL 128 -+ -+/* If periodic traffic (intr or isoc) is to be used, then one entry in the EP -+ table must be "invalid". By this we mean that we shouldn't care about epid -+ attentions for this epid, or at least handle them differently from epid -+ attentions for "valid" epids. This define determines which one to use -+ (don't change it). */ -+#define INVALID_EPID 31 -+/* A special epid for the bulk dummys. */ -+#define DUMMY_EPID 30 -+ -+/* Module settings */ -+ -+MODULE_DESCRIPTION(DESCRIPTION); -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Konrad Eriksson "); -+ -+ -+/* Module parameters */ -+ -+/* 0 = No ports enabled -+ 1 = Only port 1 enabled (on board ethernet on devboard) -+ 2 = Only port 2 enabled (external connector on devboard) -+ 3 = Both ports enabled -+*/ -+static unsigned int ports = 3; -+module_param(ports, uint, S_IRUGO); -+MODULE_PARM_DESC(ports, "Bitmask indicating USB ports to use"); -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Shared global variables for this module */ -+/***************************************************************************/ -+/***************************************************************************/ -+ -+/* EP descriptor lists for non period transfers. Must be 32-bit aligned. */ -+static volatile struct USB_EP_Desc TxBulkEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+ -+static volatile struct USB_EP_Desc TxCtrlEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+ -+/* EP descriptor lists for period transfers. Must be 32-bit aligned. */ -+static volatile struct USB_EP_Desc TxIntrEPList[MAX_INTR_INTERVAL] __attribute__ ((aligned (4))); -+static volatile struct USB_SB_Desc TxIntrSB_zout __attribute__ ((aligned (4))); -+ -+static volatile struct USB_EP_Desc TxIsocEPList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+static volatile struct USB_SB_Desc TxIsocSB_zout __attribute__ ((aligned (4))); -+ -+//static volatile struct USB_SB_Desc TxIsocSBList[NBR_OF_EPIDS] __attribute__ ((aligned (4))); -+ -+/* After each enabled bulk EP IN we put two disabled EP descriptors with the eol flag set, -+ causing the DMA to stop the DMA channel. The first of these two has the intr flag set, which -+ gives us a dma8_sub0_descr interrupt. When we receive this, we advance the DMA one step in the -+ EP list and then restart the bulk channel, thus forcing a switch between bulk EP descriptors -+ in each frame. */ -+static volatile struct USB_EP_Desc TxBulkDummyEPList[NBR_OF_EPIDS][2] __attribute__ ((aligned (4))); -+ -+/* List of URB pointers, where each points to the active URB for a epid. -+ For Bulk, Ctrl and Intr this means which URB that currently is added to -+ DMA lists (Isoc URBs are all directly added to DMA lists). As soon as -+ URB has completed is the queue examined and the first URB in queue is -+ removed and moved to the activeUrbList while its state change to STARTED and -+ its transfer(s) gets added to DMA list (exception Isoc where URBs enter -+ state STARTED directly and added transfers added to DMA lists). */ -+static struct urb *activeUrbList[NBR_OF_EPIDS]; -+ -+/* Additional software state info for each epid */ -+static struct etrax_epid epid_state[NBR_OF_EPIDS]; -+ -+/* Timer handles for bulk traffic timer used to avoid DMA bug where DMA stops -+ even if there is new data waiting to be processed */ -+static struct timer_list bulk_start_timer = TIMER_INITIALIZER(NULL, 0, 0); -+static struct timer_list bulk_eot_timer = TIMER_INITIALIZER(NULL, 0, 0); -+ -+/* We want the start timer to expire before the eot timer, because the former -+ might start traffic, thus making it unnecessary for the latter to time -+ out. */ -+#define BULK_START_TIMER_INTERVAL (HZ/50) /* 20 ms */ -+#define BULK_EOT_TIMER_INTERVAL (HZ/16) /* 60 ms */ -+ -+/* Delay before a URB completion happen when it's scheduled to be delayed */ -+#define LATER_TIMER_DELAY (HZ/50) /* 20 ms */ -+ -+/* Simplifying macros for checking software state info of a epid */ -+/* ----------------------------------------------------------------------- */ -+#define epid_inuse(epid) epid_state[epid].inuse -+#define epid_out_traffic(epid) epid_state[epid].out_traffic -+#define epid_isoc(epid) (epid_state[epid].type == PIPE_ISOCHRONOUS ? 1 : 0) -+#define epid_intr(epid) (epid_state[epid].type == PIPE_INTERRUPT ? 1 : 0) -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* DEBUG FUNCTIONS */ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Note that these functions are always available in their "__" variants, -+ for use in error situations. The "__" missing variants are controlled by -+ the USB_DEBUG_DESC/USB_DEBUG_URB macros. */ -+static void __dump_urb(struct urb* purb) -+{ -+ struct crisv10_urb_priv *urb_priv = purb->hcpriv; -+ int urb_num = -1; -+ if(urb_priv) { -+ urb_num = urb_priv->urb_num; -+ } -+ printk("\nURB:0x%x[%d]\n", (unsigned int)purb, urb_num); -+ printk("dev :0x%08lx\n", (unsigned long)purb->dev); -+ printk("pipe :0x%08x\n", purb->pipe); -+ printk("status :%d\n", purb->status); -+ printk("transfer_flags :0x%08x\n", purb->transfer_flags); -+ printk("transfer_buffer :0x%08lx\n", (unsigned long)purb->transfer_buffer); -+ printk("transfer_buffer_length:%d\n", purb->transfer_buffer_length); -+ printk("actual_length :%d\n", purb->actual_length); -+ printk("setup_packet :0x%08lx\n", (unsigned long)purb->setup_packet); -+ printk("start_frame :%d\n", purb->start_frame); -+ printk("number_of_packets :%d\n", purb->number_of_packets); -+ printk("interval :%d\n", purb->interval); -+ printk("error_count :%d\n", purb->error_count); -+ printk("context :0x%08lx\n", (unsigned long)purb->context); -+ printk("complete :0x%08lx\n\n", (unsigned long)purb->complete); -+} -+ -+static void __dump_in_desc(volatile struct USB_IN_Desc *in) -+{ -+ printk("\nUSB_IN_Desc at 0x%08lx\n", (unsigned long)in); -+ printk(" sw_len : 0x%04x (%d)\n", in->sw_len, in->sw_len); -+ printk(" command : 0x%04x\n", in->command); -+ printk(" next : 0x%08lx\n", in->next); -+ printk(" buf : 0x%08lx\n", in->buf); -+ printk(" hw_len : 0x%04x (%d)\n", in->hw_len, in->hw_len); -+ printk(" status : 0x%04x\n\n", in->status); -+} -+ -+static void __dump_sb_desc(volatile struct USB_SB_Desc *sb) -+{ -+ char tt = (sb->command & 0x30) >> 4; -+ char *tt_string; -+ -+ switch (tt) { -+ case 0: -+ tt_string = "zout"; -+ break; -+ case 1: -+ tt_string = "in"; -+ break; -+ case 2: -+ tt_string = "out"; -+ break; -+ case 3: -+ tt_string = "setup"; -+ break; -+ default: -+ tt_string = "unknown (weird)"; -+ } -+ -+ printk(" USB_SB_Desc at 0x%08lx ", (unsigned long)sb); -+ printk(" command:0x%04x (", sb->command); -+ printk("rem:%d ", (sb->command & 0x3f00) >> 8); -+ printk("full:%d ", (sb->command & 0x40) >> 6); -+ printk("tt:%d(%s) ", tt, tt_string); -+ printk("intr:%d ", (sb->command & 0x8) >> 3); -+ printk("eot:%d ", (sb->command & 0x2) >> 1); -+ printk("eol:%d)", sb->command & 0x1); -+ printk(" sw_len:0x%04x(%d)", sb->sw_len, sb->sw_len); -+ printk(" next:0x%08lx", sb->next); -+ printk(" buf:0x%08lx\n", sb->buf); -+} -+ -+ -+static void __dump_ep_desc(volatile struct USB_EP_Desc *ep) -+{ -+ printk("USB_EP_Desc at 0x%08lx ", (unsigned long)ep); -+ printk(" command:0x%04x (", ep->command); -+ printk("ep_id:%d ", (ep->command & 0x1f00) >> 8); -+ printk("enable:%d ", (ep->command & 0x10) >> 4); -+ printk("intr:%d ", (ep->command & 0x8) >> 3); -+ printk("eof:%d ", (ep->command & 0x2) >> 1); -+ printk("eol:%d)", ep->command & 0x1); -+ printk(" hw_len:0x%04x(%d)", ep->hw_len, ep->hw_len); -+ printk(" next:0x%08lx", ep->next); -+ printk(" sub:0x%08lx\n", ep->sub); -+} -+ -+static inline void __dump_ep_list(int pipe_type) -+{ -+ volatile struct USB_EP_Desc *ep; -+ volatile struct USB_EP_Desc *first_ep; -+ volatile struct USB_SB_Desc *sb; -+ -+ switch (pipe_type) -+ { -+ case PIPE_BULK: -+ first_ep = &TxBulkEPList[0]; -+ break; -+ case PIPE_CONTROL: -+ first_ep = &TxCtrlEPList[0]; -+ break; -+ case PIPE_INTERRUPT: -+ first_ep = &TxIntrEPList[0]; -+ break; -+ case PIPE_ISOCHRONOUS: -+ first_ep = &TxIsocEPList[0]; -+ break; -+ default: -+ warn("Cannot dump unknown traffic type"); -+ return; -+ } -+ ep = first_ep; -+ -+ printk("\n\nDumping EP list...\n\n"); -+ -+ do { -+ __dump_ep_desc(ep); -+ /* Cannot phys_to_virt on 0 as it turns into 80000000, which is != 0. */ -+ sb = ep->sub ? phys_to_virt(ep->sub) : 0; -+ while (sb) { -+ __dump_sb_desc(sb); -+ sb = sb->next ? phys_to_virt(sb->next) : 0; -+ } -+ ep = (volatile struct USB_EP_Desc *)(phys_to_virt(ep->next)); -+ -+ } while (ep != first_ep); -+} -+ -+static inline void __dump_ept_data(int epid) -+{ -+ unsigned long flags; -+ __u32 r_usb_ept_data; -+ -+ if (epid < 0 || epid > 31) { -+ printk("Cannot dump ept data for invalid epid %d\n", epid); -+ return; -+ } -+ -+ local_irq_save(flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ r_usb_ept_data = *R_USB_EPT_DATA; -+ local_irq_restore(flags); -+ -+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", r_usb_ept_data, epid); -+ if (r_usb_ept_data == 0) { -+ /* No need for more detailed printing. */ -+ return; -+ } -+ printk(" valid : %d\n", (r_usb_ept_data & 0x80000000) >> 31); -+ printk(" hold : %d\n", (r_usb_ept_data & 0x40000000) >> 30); -+ printk(" error_count_in : %d\n", (r_usb_ept_data & 0x30000000) >> 28); -+ printk(" t_in : %d\n", (r_usb_ept_data & 0x08000000) >> 27); -+ printk(" low_speed : %d\n", (r_usb_ept_data & 0x04000000) >> 26); -+ printk(" port : %d\n", (r_usb_ept_data & 0x03000000) >> 24); -+ printk(" error_code : %d\n", (r_usb_ept_data & 0x00c00000) >> 22); -+ printk(" t_out : %d\n", (r_usb_ept_data & 0x00200000) >> 21); -+ printk(" error_count_out : %d\n", (r_usb_ept_data & 0x00180000) >> 19); -+ printk(" max_len : %d\n", (r_usb_ept_data & 0x0003f800) >> 11); -+ printk(" ep : %d\n", (r_usb_ept_data & 0x00000780) >> 7); -+ printk(" dev : %d\n", (r_usb_ept_data & 0x0000003f)); -+} -+ -+static inline void __dump_ept_data_iso(int epid) -+{ -+ unsigned long flags; -+ __u32 ept_data; -+ -+ if (epid < 0 || epid > 31) { -+ printk("Cannot dump ept data for invalid epid %d\n", epid); -+ return; -+ } -+ -+ local_irq_save(flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ ept_data = *R_USB_EPT_DATA_ISO; -+ local_irq_restore(flags); -+ -+ printk(" R_USB_EPT_DATA = 0x%x for epid %d :\n", ept_data, epid); -+ if (ept_data == 0) { -+ /* No need for more detailed printing. */ -+ return; -+ } -+ printk(" valid : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, valid, -+ ept_data)); -+ printk(" port : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, port, -+ ept_data)); -+ printk(" error_code : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, -+ ept_data)); -+ printk(" max_len : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, max_len, -+ ept_data)); -+ printk(" ep : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, ep, -+ ept_data)); -+ printk(" dev : %d\n", IO_EXTRACT(R_USB_EPT_DATA_ISO, dev, -+ ept_data)); -+} -+ -+static inline void __dump_ept_data_list(void) -+{ -+ int i; -+ -+ printk("Dumping the whole R_USB_EPT_DATA list\n"); -+ -+ for (i = 0; i < 32; i++) { -+ __dump_ept_data(i); -+ } -+} -+ -+static void debug_epid(int epid) { -+ int i; -+ -+ if(epid_isoc(epid)) { -+ __dump_ept_data_iso(epid); -+ } else { -+ __dump_ept_data(epid); -+ } -+ -+ printk("Bulk:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxBulkEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxBulkEPList[i])); -+ } -+ } -+ -+ printk("Ctrl:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxCtrlEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxCtrlEPList[i])); -+ } -+ } -+ -+ printk("Intr:\n"); -+ for(i = 0; i < MAX_INTR_INTERVAL; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxIntrEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxIntrEPList[i])); -+ } -+ } -+ -+ printk("Isoc:\n"); -+ for(i = 0; i < 32; i++) { -+ if(IO_EXTRACT(USB_EP_command, epid, TxIsocEPList[i].command) == -+ epid) { -+ printk("%d: ", i); __dump_ep_desc(&(TxIsocEPList[i])); -+ } -+ } -+ -+ __dump_ept_data_list(); -+ __dump_ep_list(PIPE_INTERRUPT); -+ printk("\n\n"); -+} -+ -+ -+ -+char* hcd_status_to_str(__u8 bUsbStatus) { -+ static char hcd_status_str[128]; -+ hcd_status_str[0] = '\0'; -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, ourun, yes)) { -+ strcat(hcd_status_str, "ourun "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, perror, yes)) { -+ strcat(hcd_status_str, "perror "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, device_mode, yes)) { -+ strcat(hcd_status_str, "device_mode "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, host_mode, yes)) { -+ strcat(hcd_status_str, "host_mode "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, started, yes)) { -+ strcat(hcd_status_str, "started "); -+ } -+ if(bUsbStatus & IO_STATE(R_USB_STATUS, running, yes)) { -+ strcat(hcd_status_str, "running "); -+ } -+ return hcd_status_str; -+} -+ -+ -+char* sblist_to_str(struct USB_SB_Desc* sb_desc) { -+ static char sblist_to_str_buff[128]; -+ char tmp[32], tmp2[32]; -+ sblist_to_str_buff[0] = '\0'; -+ while(sb_desc != NULL) { -+ switch(IO_EXTRACT(USB_SB_command, tt, sb_desc->command)) { -+ case 0: sprintf(tmp, "zout"); break; -+ case 1: sprintf(tmp, "in"); break; -+ case 2: sprintf(tmp, "out"); break; -+ case 3: sprintf(tmp, "setup"); break; -+ } -+ sprintf(tmp2, "(%s %d)", tmp, sb_desc->sw_len); -+ strcat(sblist_to_str_buff, tmp2); -+ if(sb_desc->next != 0) { -+ sb_desc = phys_to_virt(sb_desc->next); -+ } else { -+ sb_desc = NULL; -+ } -+ } -+ return sblist_to_str_buff; -+} -+ -+char* port_status_to_str(__u16 wPortStatus) { -+ static char port_status_str[128]; -+ port_status_str[0] = '\0'; -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, connected, yes)) { -+ strcat(port_status_str, "connected "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) { -+ strcat(port_status_str, "enabled "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, suspended, yes)) { -+ strcat(port_status_str, "suspended "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, reset, yes)) { -+ strcat(port_status_str, "reset "); -+ } -+ if(wPortStatus & IO_STATE(R_USB_RH_PORT_STATUS_1, speed, full)) { -+ strcat(port_status_str, "full-speed "); -+ } else { -+ strcat(port_status_str, "low-speed "); -+ } -+ return port_status_str; -+} -+ -+ -+char* endpoint_to_str(struct usb_endpoint_descriptor *ed) { -+ static char endpoint_to_str_buff[128]; -+ char tmp[32]; -+ int epnum = ed->bEndpointAddress & 0x0F; -+ int dir = ed->bEndpointAddress & 0x80; -+ int type = ed->bmAttributes & 0x03; -+ endpoint_to_str_buff[0] = '\0'; -+ sprintf(endpoint_to_str_buff, "ep:%d ", epnum); -+ switch(type) { -+ case 0: -+ sprintf(tmp, " ctrl"); -+ break; -+ case 1: -+ sprintf(tmp, " isoc"); -+ break; -+ case 2: -+ sprintf(tmp, " bulk"); -+ break; -+ case 3: -+ sprintf(tmp, " intr"); -+ break; -+ } -+ strcat(endpoint_to_str_buff, tmp); -+ if(dir) { -+ sprintf(tmp, " in"); -+ } else { -+ sprintf(tmp, " out"); -+ } -+ strcat(endpoint_to_str_buff, tmp); -+ -+ return endpoint_to_str_buff; -+} -+ -+/* Debug helper functions for Transfer Controller */ -+char* pipe_to_str(unsigned int pipe) { -+ static char pipe_to_str_buff[128]; -+ char tmp[64]; -+ sprintf(pipe_to_str_buff, "dir:%s", str_dir(pipe)); -+ sprintf(tmp, " type:%s", str_type(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ -+ sprintf(tmp, " dev:%d", usb_pipedevice(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ sprintf(tmp, " ep:%d", usb_pipeendpoint(pipe)); -+ strcat(pipe_to_str_buff, tmp); -+ return pipe_to_str_buff; -+} -+ -+ -+#define USB_DEBUG_DESC 1 -+ -+#ifdef USB_DEBUG_DESC -+#define dump_in_desc(x) __dump_in_desc(x) -+#define dump_sb_desc(...) __dump_sb_desc(...) -+#define dump_ep_desc(x) __dump_ep_desc(x) -+#define dump_ept_data(x) __dump_ept_data(x) -+#else -+#define dump_in_desc(...) do {} while (0) -+#define dump_sb_desc(...) do {} while (0) -+#define dump_ep_desc(...) do {} while (0) -+#endif -+ -+ -+/* Uncomment this to enable massive function call trace -+ #define USB_DEBUG_TRACE */ -+//#define USB_DEBUG_TRACE 1 -+ -+#ifdef USB_DEBUG_TRACE -+#define DBFENTER (printk(": Entering: %s\n", __FUNCTION__)) -+#define DBFEXIT (printk(": Exiting: %s\n", __FUNCTION__)) -+#else -+#define DBFENTER do {} while (0) -+#define DBFEXIT do {} while (0) -+#endif -+ -+#define CHECK_ALIGN(x) if (((__u32)(x)) & 0x00000003) \ -+{panic("Alignment check (DWORD) failed at %s:%s:%d\n", __FILE__, __FUNCTION__, __LINE__);} -+ -+/* Most helpful debugging aid */ -+#define ASSERT(expr) ((void) ((expr) ? 0 : (err("assert failed at: %s %d",__FUNCTION__, __LINE__)))) -+ -+ -+/***************************************************************************/ -+/***************************************************************************/ -+/* Forward declarations */ -+/***************************************************************************/ -+/***************************************************************************/ -+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg); -+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg); -+ -+void rh_port_status_change(__u16[]); -+int rh_clear_port_feature(__u8, __u16); -+int rh_set_port_feature(__u8, __u16); -+static void rh_disable_port(unsigned int port); -+ -+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, -+ int timer); -+ -+//static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, -+// int mem_flags); -+static int tc_setup_epid(struct urb *urb, int mem_flags); -+static void tc_free_epid(struct usb_host_endpoint *ep); -+static int tc_allocate_epid(void); -+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status); -+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, -+ int status); -+ -+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, -+ int mem_flags); -+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb); -+ -+static inline struct urb *urb_list_first(int epid); -+static inline void urb_list_add(struct urb *urb, int epid, -+ int mem_flags); -+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid); -+static inline void urb_list_del(struct urb *urb, int epid); -+static inline void urb_list_move_last(struct urb *urb, int epid); -+static inline struct urb *urb_list_next(struct urb *urb, int epid); -+ -+int create_sb_for_urb(struct urb *urb, int mem_flags); -+int init_intr_urb(struct urb *urb, int mem_flags); -+ -+static inline void etrax_epid_set(__u8 index, __u32 data); -+static inline void etrax_epid_clear_error(__u8 index); -+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, -+ __u8 toggle); -+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout); -+static inline __u32 etrax_epid_get(__u8 index); -+ -+/* We're accessing the same register position in Etrax so -+ when we do full access the internal difference doesn't matter */ -+#define etrax_epid_iso_set(index, data) etrax_epid_set(index, data) -+#define etrax_epid_iso_get(index) etrax_epid_get(index) -+ -+ -+//static void tc_dma_process_isoc_urb(struct urb *urb); -+static void tc_dma_process_queue(int epid); -+static void tc_dma_unlink_intr_urb(struct urb *urb); -+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc); -+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc); -+ -+static void tc_bulk_start_timer_func(unsigned long dummy); -+static void tc_bulk_eot_timer_func(unsigned long dummy); -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Host Controler Driver block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* HCD operations */ -+static irqreturn_t crisv10_hcd_top_irq(int irq, void*); -+static int crisv10_hcd_reset(struct usb_hcd *); -+static int crisv10_hcd_start(struct usb_hcd *); -+static void crisv10_hcd_stop(struct usb_hcd *); -+#ifdef CONFIG_PM -+static int crisv10_hcd_suspend(struct device *, u32, u32); -+static int crisv10_hcd_resume(struct device *, u32); -+#endif /* CONFIG_PM */ -+static int crisv10_hcd_get_frame(struct usb_hcd *); -+ -+//static int tc_urb_enqueue(struct usb_hcd *, struct usb_host_endpoint *ep, struct urb *, gfp_t mem_flags); -+static int tc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags); -+//static int tc_urb_dequeue(struct usb_hcd *, struct urb *); -+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); -+static void tc_endpoint_disable(struct usb_hcd *, struct usb_host_endpoint *ep); -+ -+static int rh_status_data_request(struct usb_hcd *, char *); -+static int rh_control_request(struct usb_hcd *, u16, u16, u16, char*, u16); -+ -+#ifdef CONFIG_PM -+static int crisv10_hcd_hub_suspend(struct usb_hcd *); -+static int crisv10_hcd_hub_resume(struct usb_hcd *); -+#endif /* CONFIG_PM */ -+#ifdef CONFIG_USB_OTG -+static int crisv10_hcd_start_port_reset(struct usb_hcd *, unsigned); -+#endif /* CONFIG_USB_OTG */ -+ -+/* host controller driver interface */ -+static const struct hc_driver crisv10_hc_driver = -+ { -+ .description = hc_name, -+ .product_desc = product_desc, -+ .hcd_priv_size = sizeof(struct crisv10_hcd), -+ -+ /* Attaching IRQ handler manualy in probe() */ -+ /* .irq = crisv10_hcd_irq, */ -+ -+ .flags = HCD_USB11, -+ -+ /* called to init HCD and root hub */ -+ .reset = crisv10_hcd_reset, -+ .start = crisv10_hcd_start, -+ -+ /* cleanly make HCD stop writing memory and doing I/O */ -+ .stop = crisv10_hcd_stop, -+ -+ /* return current frame number */ -+ .get_frame_number = crisv10_hcd_get_frame, -+ -+ -+ /* Manage i/o requests via the Transfer Controller */ -+ .urb_enqueue = tc_urb_enqueue, -+ .urb_dequeue = tc_urb_dequeue, -+ -+ /* hw synch, freeing endpoint resources that urb_dequeue can't */ -+ .endpoint_disable = tc_endpoint_disable, -+ -+ -+ /* Root Hub support */ -+ .hub_status_data = rh_status_data_request, -+ .hub_control = rh_control_request, -+#ifdef CONFIG_PM -+ .hub_suspend = rh_suspend_request, -+ .hub_resume = rh_resume_request, -+#endif /* CONFIG_PM */ -+#ifdef CONFIG_USB_OTG -+ .start_port_reset = crisv10_hcd_start_port_reset, -+#endif /* CONFIG_USB_OTG */ -+ }; -+ -+ -+/* -+ * conversion between pointers to a hcd and the corresponding -+ * crisv10_hcd -+ */ -+ -+static inline struct crisv10_hcd *hcd_to_crisv10_hcd(struct usb_hcd *hcd) -+{ -+ return (struct crisv10_hcd *) hcd->hcd_priv; -+} -+ -+static inline struct usb_hcd *crisv10_hcd_to_hcd(struct crisv10_hcd *hcd) -+{ -+ return container_of((void *) hcd, struct usb_hcd, hcd_priv); -+} -+ -+/* check if specified port is in use */ -+static inline int port_in_use(unsigned int port) -+{ -+ return ports & (1 << port); -+} -+ -+/* number of ports in use */ -+static inline unsigned int num_ports(void) -+{ -+ unsigned int i, num = 0; -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) -+ if (port_in_use(i)) -+ num++; -+ return num; -+} -+ -+/* map hub port number to the port number used internally by the HC */ -+static inline unsigned int map_port(unsigned int port) -+{ -+ unsigned int i, num = 0; -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) -+ if (port_in_use(i)) -+ if (++num == port) -+ return i; -+ return -1; -+} -+ -+/* size of descriptors in slab cache */ -+#ifndef MAX -+#define MAX(x, y) ((x) > (y) ? (x) : (y)) -+#endif -+ -+ -+/******************************************************************/ -+/* Hardware Interrupt functions */ -+/******************************************************************/ -+ -+/* Fast interrupt handler for HC */ -+static irqreturn_t crisv10_hcd_top_irq(int irq, void *vcd) -+{ -+ struct usb_hcd *hcd = vcd; -+ struct crisv10_irq_reg reg; -+ __u32 irq_mask; -+ unsigned long flags; -+ -+ DBFENTER; -+ -+ ASSERT(hcd != NULL); -+ reg.hcd = hcd; -+ -+ /* Turn of other interrupts while handling these sensitive cases */ -+ local_irq_save(flags); -+ -+ /* Read out which interrupts that are flaged */ -+ irq_mask = *R_USB_IRQ_MASK_READ; -+ reg.r_usb_irq_mask_read = irq_mask; -+ -+ /* Reading R_USB_STATUS clears the ctl_status interrupt. Note that -+ R_USB_STATUS must be read before R_USB_EPID_ATTN since reading the latter -+ clears the ourun and perror fields of R_USB_STATUS. */ -+ reg.r_usb_status = *R_USB_STATUS; -+ -+ /* Reading R_USB_EPID_ATTN clears the iso_eof, bulk_eot and epid_attn -+ interrupts. */ -+ reg.r_usb_epid_attn = *R_USB_EPID_ATTN; -+ -+ /* Reading R_USB_RH_PORT_STATUS_1 and R_USB_RH_PORT_STATUS_2 clears the -+ port_status interrupt. */ -+ reg.r_usb_rh_port_status_1 = *R_USB_RH_PORT_STATUS_1; -+ reg.r_usb_rh_port_status_2 = *R_USB_RH_PORT_STATUS_2; -+ -+ /* Reading R_USB_FM_NUMBER clears the sof interrupt. */ -+ /* Note: the lower 11 bits contain the actual frame number, sent with each -+ sof. */ -+ reg.r_usb_fm_number = *R_USB_FM_NUMBER; -+ -+ /* Interrupts are handled in order of priority. */ -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, port_status)) { -+ crisv10_hcd_port_status_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, epid_attn)) { -+ crisv10_hcd_epid_attn_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, ctl_status)) { -+ crisv10_hcd_ctl_status_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, iso_eof)) { -+ crisv10_hcd_isoc_eof_irq(®); -+ } -+ if (irq_mask & IO_MASK(R_USB_IRQ_MASK_READ, bulk_eot)) { -+ /* Update/restart the bulk start timer since obviously the channel is -+ running. */ -+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -+ /* Update/restart the bulk eot timer since we just received an bulk eot -+ interrupt. */ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ -+ /* Check for finished bulk transfers on epids */ -+ check_finished_bulk_tx_epids(hcd, 0); -+ } -+ local_irq_restore(flags); -+ -+ DBFEXIT; -+ return IRQ_HANDLED; -+} -+ -+ -+void crisv10_hcd_epid_attn_irq(struct crisv10_irq_reg *reg) { -+ struct usb_hcd *hcd = reg->hcd; -+ struct crisv10_urb_priv *urb_priv; -+ int epid; -+ DBFENTER; -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (test_bit(epid, (void *)®->r_usb_epid_attn)) { -+ struct urb *urb; -+ __u32 ept_data; -+ int error_code; -+ -+ if (epid == DUMMY_EPID || epid == INVALID_EPID) { -+ /* We definitely don't care about these ones. Besides, they are -+ always disabled, so any possible disabling caused by the -+ epid attention interrupt is irrelevant. */ -+ warn("Got epid_attn for INVALID_EPID or DUMMY_EPID (%d).", epid); -+ continue; -+ } -+ -+ if(!epid_inuse(epid)) { -+ irq_err("Epid attention on epid:%d that isn't in use\n", epid); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ debug_epid(epid); -+ continue; -+ } -+ -+ /* Note that although there are separate R_USB_EPT_DATA and -+ R_USB_EPT_DATA_ISO registers, they are located at the same address and -+ are of the same size. In other words, this read should be ok for isoc -+ also. */ -+ ept_data = etrax_epid_get(epid); -+ error_code = IO_EXTRACT(R_USB_EPT_DATA, error_code, ept_data); -+ -+ /* Get the active URB for this epid. We blatantly assume -+ that only this URB could have caused the epid attention. */ -+ urb = activeUrbList[epid]; -+ if (urb == NULL) { -+ irq_err("Attention on epid:%d error:%d with no active URB.\n", -+ epid, error_code); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ debug_epid(epid); -+ continue; -+ } -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Using IO_STATE_VALUE on R_USB_EPT_DATA should be ok for isoc also. */ -+ if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ -+ /* Isoc traffic doesn't have error_count_in/error_count_out. */ -+ if ((usb_pipetype(urb->pipe) != PIPE_ISOCHRONOUS) && -+ (IO_EXTRACT(R_USB_EPT_DATA, error_count_in, ept_data) == 3 || -+ IO_EXTRACT(R_USB_EPT_DATA, error_count_out, ept_data) == 3)) { -+ /* Check if URB allready is marked for late-finish, we can get -+ several 3rd error for Intr traffic when a device is unplugged */ -+ if(urb_priv->later_data == NULL) { -+ /* 3rd error. */ -+ irq_warn("3rd error for epid:%d (%s %s) URB:0x%x[%d]\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe), -+ (unsigned int)urb, urb_priv->urb_num); -+ -+ tc_finish_urb_later(hcd, urb, -EPROTO); -+ } -+ -+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -+ irq_warn("Perror for epid:%d\n", epid); -+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ -+ if (!(ept_data & IO_MASK(R_USB_EPT_DATA, valid))) { -+ /* invalid ep_id */ -+ panic("Perror because of invalid epid." -+ " Deconfigured too early?"); -+ } else { -+ /* past eof1, near eof, zout transfer, setup transfer */ -+ /* Dump the urb and the relevant EP descriptor. */ -+ panic("Something wrong with DMA descriptor contents." -+ " Too much traffic inserted?"); -+ } -+ } else if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -+ /* buffer ourun */ -+ printk("FM_NUMBER: %d\n", reg->r_usb_fm_number & 0x7ff); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ -+ panic("Buffer overrun/underrun for epid:%d. DMA too busy?", epid); -+ } else { -+ irq_warn("Attention on epid:%d (%s %s) with no error code\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ printk("R_USB_STATUS: 0x%x\n", reg->r_usb_status); -+ __dump_urb(urb); -+ debug_epid(epid); -+ } -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ stall)) { -+ /* Not really a protocol error, just says that the endpoint gave -+ a stall response. Note that error_code cannot be stall for isoc. */ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ panic("Isoc traffic cannot stall"); -+ } -+ -+ tc_dbg("Stall for epid:%d (%s %s) URB:0x%x\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe), (unsigned int)urb); -+ tc_finish_urb(hcd, urb, -EPIPE); -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ bus_error)) { -+ /* Two devices responded to a transaction request. Must be resolved -+ by software. FIXME: Reset ports? */ -+ panic("Bus error for epid %d." -+ " Two devices responded to transaction request\n", -+ epid); -+ -+ } else if (error_code == IO_STATE_VALUE(R_USB_EPT_DATA, error_code, -+ buffer_error)) { -+ /* DMA overrun or underrun. */ -+ irq_warn("Buffer overrun/underrun for epid:%d (%s %s)\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ -+ /* It seems that error_code = buffer_error in -+ R_USB_EPT_DATA/R_USB_EPT_DATA_ISO and ourun = yes in R_USB_STATUS -+ are the same error. */ -+ tc_finish_urb(hcd, urb, -EPROTO); -+ } else { -+ irq_warn("Unknown attention on epid:%d (%s %s)\n", epid, -+ str_dir(urb->pipe), str_type(urb->pipe)); -+ dump_ept_data(epid); -+ } -+ } -+ } -+ DBFEXIT; -+} -+ -+void crisv10_hcd_port_status_irq(struct crisv10_irq_reg *reg) -+{ -+ __u16 port_reg[USB_ROOT_HUB_PORTS]; -+ DBFENTER; -+ port_reg[0] = reg->r_usb_rh_port_status_1; -+ port_reg[1] = reg->r_usb_rh_port_status_2; -+ rh_port_status_change(port_reg); -+ DBFEXIT; -+} -+ -+void crisv10_hcd_isoc_eof_irq(struct crisv10_irq_reg *reg) -+{ -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv *urb_priv; -+ -+ DBFENTER; -+ -+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -+ -+ /* Only check epids that are in use, is valid and has SB list */ -+ if (!epid_inuse(epid) || epid == INVALID_EPID || -+ TxIsocEPList[epid].sub == 0 || epid == DUMMY_EPID) { -+ /* Nothing here to see. */ -+ continue; -+ } -+ ASSERT(epid_isoc(epid)); -+ -+ /* Get the active URB for this epid (if any). */ -+ urb = activeUrbList[epid]; -+ if (urb == 0) { -+ isoc_warn("Ignoring NULL urb for epid:%d\n", epid); -+ continue; -+ } -+ if(!epid_out_traffic(epid)) { -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ if (urb_priv->urb_state == NOT_STARTED) { -+ /* If ASAP is not set and urb->start_frame is the current frame, -+ start the transfer. */ -+ if (!(urb->transfer_flags & URB_ISO_ASAP) && -+ (urb->start_frame == (*R_USB_FM_NUMBER & 0x7ff))) { -+ /* EP should not be enabled if we're waiting for start_frame */ -+ ASSERT((TxIsocEPList[epid].command & -+ IO_STATE(USB_EP_command, enable, yes)) == 0); -+ -+ isoc_warn("Enabling isoc IN EP descr for epid %d\n", epid); -+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ /* This urb is now active. */ -+ urb_priv->urb_state = STARTED; -+ continue; -+ } -+ } -+ } -+ } -+ -+ DBFEXIT; -+} -+ -+void crisv10_hcd_ctl_status_irq(struct crisv10_irq_reg *reg) -+{ -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(reg->hcd); -+ -+ DBFENTER; -+ ASSERT(crisv10_hcd); -+ -+ irq_dbg("ctr_status_irq, controller status: %s\n", -+ hcd_status_to_str(reg->r_usb_status)); -+ -+ /* FIXME: What should we do if we get ourun or perror? Dump the EP and SB -+ list for the corresponding epid? */ -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, ourun)) { -+ panic("USB controller got ourun."); -+ } -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, perror)) { -+ -+ /* Before, etrax_usb_do_intr_recover was called on this epid if it was -+ an interrupt pipe. I don't see how re-enabling all EP descriptors -+ will help if there was a programming error. */ -+ panic("USB controller got perror."); -+ } -+ -+ /* Keep track of USB Controller, if it's running or not */ -+ if(reg->r_usb_status & IO_STATE(R_USB_STATUS, running, yes)) { -+ crisv10_hcd->running = 1; -+ } else { -+ crisv10_hcd->running = 0; -+ } -+ -+ if (reg->r_usb_status & IO_MASK(R_USB_STATUS, device_mode)) { -+ /* We should never operate in device mode. */ -+ panic("USB controller in device mode."); -+ } -+ -+ /* Set the flag to avoid getting "Unlink after no-IRQ? Controller is probably -+ using the wrong IRQ" from hcd_unlink_urb() in drivers/usb/core/hcd.c */ -+ set_bit(HCD_FLAG_SAW_IRQ, ®->hcd->flags); -+ -+ DBFEXIT; -+} -+ -+ -+/******************************************************************/ -+/* Host Controller interface functions */ -+/******************************************************************/ -+ -+static inline void crisv10_ready_wait(void) { -+ volatile int timeout = 10000; -+ /* Check the busy bit of USB controller in Etrax */ -+ while((*R_USB_COMMAND & IO_MASK(R_USB_COMMAND, busy)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for USB controller to be idle\n"); -+ } -+} -+ -+/* reset host controller */ -+static int crisv10_hcd_reset(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "reset\n"); -+ -+ -+ /* Reset the USB interface. */ -+ /* -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -+ nop(); -+ */ -+ DBFEXIT; -+ return 0; -+} -+ -+/* start host controller */ -+static int crisv10_hcd_start(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "start\n"); -+ -+ crisv10_ready_wait(); -+ -+ /* Start processing of USB traffic. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ -+ nop(); -+ -+ hcd->state = HC_STATE_RUNNING; -+ -+ DBFEXIT; -+ return 0; -+} -+ -+/* stop host controller */ -+static void crisv10_hcd_stop(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ hcd_dbg(hcd, "stop\n"); -+ crisv10_hcd_reset(hcd); -+ DBFEXIT; -+} -+ -+/* return the current frame number */ -+static int crisv10_hcd_get_frame(struct usb_hcd *hcd) -+{ -+ DBFENTER; -+ DBFEXIT; -+ return (*R_USB_FM_NUMBER & 0x7ff); -+} -+ -+#ifdef CONFIG_USB_OTG -+ -+static int crisv10_hcd_start_port_reset(struct usb_hcd *hcd, unsigned port) -+{ -+ return 0; /* no-op for now */ -+} -+ -+#endif /* CONFIG_USB_OTG */ -+ -+ -+/******************************************************************/ -+/* Root Hub functions */ -+/******************************************************************/ -+ -+/* root hub status */ -+static const struct usb_hub_status rh_hub_status = -+ { -+ .wHubStatus = 0, -+ .wHubChange = 0, -+ }; -+ -+/* root hub descriptor */ -+static const u8 rh_hub_descr[] = -+ { -+ 0x09, /* bDescLength */ -+ 0x29, /* bDescriptorType */ -+ USB_ROOT_HUB_PORTS, /* bNbrPorts */ -+ 0x00, /* wHubCharacteristics */ -+ 0x00, -+ 0x01, /* bPwrOn2pwrGood */ -+ 0x00, /* bHubContrCurrent */ -+ 0x00, /* DeviceRemovable */ -+ 0xff /* PortPwrCtrlMask */ -+ }; -+ -+/* Actual holder of root hub status*/ -+struct crisv10_rh rh; -+ -+/* Initialize root hub data structures (called from dvdrv_hcd_probe()) */ -+int rh_init(void) { -+ int i; -+ /* Reset port status flags */ -+ for (i = 0; i < USB_ROOT_HUB_PORTS; i++) { -+ rh.wPortChange[i] = 0; -+ rh.wPortStatusPrev[i] = 0; -+ } -+ return 0; -+} -+ -+#define RH_FEAT_MASK ((1<lock); -+ for (i = 1; i <= crisv10_hcd->num_ports; i++) { -+ if (rh.wPortChange[map_port(i)]) { -+ *buf |= (1 << i); -+ rh_dbg("rh_status_data_request, change on port %d: %s Current Status: %s\n", i, -+ port_status_to_str(rh.wPortChange[map_port(i)]), -+ port_status_to_str(rh.wPortStatusPrev[map_port(i)])); -+ } -+ } -+ spin_unlock(&crisv10_hcd->lock); -+ -+// DBFEXIT; -+ -+ return *buf == 0 ? 0 : 1; -+} -+ -+/* Handle a control request for the root hub (called from hcd_driver) */ -+static int rh_control_request(struct usb_hcd *hcd, -+ u16 typeReq, -+ u16 wValue, -+ u16 wIndex, -+ char *buf, -+ u16 wLength) { -+ -+ struct crisv10_hcd *crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ int retval = 0; -+ int len; -+ DBFENTER; -+ -+ switch (typeReq) { -+ case GetHubDescriptor: -+ rh_dbg("GetHubDescriptor\n"); -+ len = min_t(unsigned int, sizeof rh_hub_descr, wLength); -+ memcpy(buf, rh_hub_descr, len); -+ buf[2] = crisv10_hcd->num_ports; -+ break; -+ case GetHubStatus: -+ rh_dbg("GetHubStatus\n"); -+ len = min_t(unsigned int, sizeof rh_hub_status, wLength); -+ memcpy(buf, &rh_hub_status, len); -+ break; -+ case GetPortStatus: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ rh_dbg("GetportStatus, port:%d change:%s status:%s\n", wIndex, -+ port_status_to_str(rh.wPortChange[map_port(wIndex)]), -+ port_status_to_str(rh.wPortStatusPrev[map_port(wIndex)])); -+ *(u16 *) buf = cpu_to_le16(rh.wPortStatusPrev[map_port(wIndex)]); -+ *(u16 *) (buf + 2) = cpu_to_le16(rh.wPortChange[map_port(wIndex)]); -+ break; -+ case SetHubFeature: -+ rh_dbg("SetHubFeature\n"); -+ case ClearHubFeature: -+ rh_dbg("ClearHubFeature\n"); -+ switch (wValue) { -+ case C_HUB_OVER_CURRENT: -+ case C_HUB_LOCAL_POWER: -+ rh_warn("Not implemented hub request:%d \n", typeReq); -+ /* not implemented */ -+ break; -+ default: -+ goto error; -+ } -+ break; -+ case SetPortFeature: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ if(rh_set_port_feature(map_port(wIndex), wValue)) -+ goto error; -+ break; -+ case ClearPortFeature: -+ if (!wIndex || wIndex > crisv10_hcd->num_ports) -+ goto error; -+ if(rh_clear_port_feature(map_port(wIndex), wValue)) -+ goto error; -+ break; -+ default: -+ rh_warn("Unknown hub request: %d\n", typeReq); -+ error: -+ retval = -EPIPE; -+ } -+ DBFEXIT; -+ return retval; -+} -+ -+int rh_set_port_feature(__u8 bPort, __u16 wFeature) { -+ __u8 bUsbCommand = 0; -+ switch(wFeature) { -+ case USB_PORT_FEAT_RESET: -+ rh_dbg("SetPortFeature: reset\n"); -+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, reset); -+ goto set; -+ break; -+ case USB_PORT_FEAT_SUSPEND: -+ rh_dbg("SetPortFeature: suspend\n"); -+ bUsbCommand |= IO_STATE(R_USB_COMMAND, port_cmd, suspend); -+ goto set; -+ break; -+ case USB_PORT_FEAT_POWER: -+ rh_dbg("SetPortFeature: power\n"); -+ break; -+ case USB_PORT_FEAT_C_CONNECTION: -+ rh_dbg("SetPortFeature: c_connection\n"); -+ break; -+ case USB_PORT_FEAT_C_RESET: -+ rh_dbg("SetPortFeature: c_reset\n"); -+ break; -+ case USB_PORT_FEAT_C_OVER_CURRENT: -+ rh_dbg("SetPortFeature: c_over_current\n"); -+ break; -+ -+ set: -+ /* Select which port via the port_sel field */ -+ bUsbCommand |= IO_FIELD(R_USB_COMMAND, port_sel, bPort+1); -+ -+ /* Make sure the controller isn't busy. */ -+ crisv10_ready_wait(); -+ /* Send out the actual command to the USB controller */ -+ *R_USB_COMMAND = bUsbCommand; -+ -+ /* If port reset then also bring USB controller into running state */ -+ if(wFeature == USB_PORT_FEAT_RESET) { -+ /* Wait a while for controller to first become started after port reset */ -+ udelay(12000); /* 12ms blocking wait */ -+ -+ /* Make sure the controller isn't busy. */ -+ crisv10_ready_wait(); -+ -+ /* If all enabled ports were disabled the host controller goes down into -+ started mode, so we need to bring it back into the running state. -+ (This is safe even if it's already in the running state.) */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ } -+ -+ break; -+ default: -+ rh_dbg("SetPortFeature: unknown feature\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+int rh_clear_port_feature(__u8 bPort, __u16 wFeature) { -+ switch(wFeature) { -+ case USB_PORT_FEAT_ENABLE: -+ rh_dbg("ClearPortFeature: enable\n"); -+ rh_disable_port(bPort); -+ break; -+ case USB_PORT_FEAT_SUSPEND: -+ rh_dbg("ClearPortFeature: suspend\n"); -+ break; -+ case USB_PORT_FEAT_POWER: -+ rh_dbg("ClearPortFeature: power\n"); -+ break; -+ -+ case USB_PORT_FEAT_C_ENABLE: -+ rh_dbg("ClearPortFeature: c_enable\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_SUSPEND: -+ rh_dbg("ClearPortFeature: c_suspend\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_CONNECTION: -+ rh_dbg("ClearPortFeature: c_connection\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_OVER_CURRENT: -+ rh_dbg("ClearPortFeature: c_over_current\n"); -+ goto clear; -+ case USB_PORT_FEAT_C_RESET: -+ rh_dbg("ClearPortFeature: c_reset\n"); -+ goto clear; -+ clear: -+ rh.wPortChange[bPort] &= ~(1 << (wFeature - 16)); -+ break; -+ default: -+ rh_dbg("ClearPortFeature: unknown feature\n"); -+ return -1; -+ } -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+/* Handle a suspend request for the root hub (called from hcd_driver) */ -+static int rh_suspend_request(struct usb_hcd *hcd) -+{ -+ return 0; /* no-op for now */ -+} -+ -+/* Handle a resume request for the root hub (called from hcd_driver) */ -+static int rh_resume_request(struct usb_hcd *hcd) -+{ -+ return 0; /* no-op for now */ -+} -+#endif /* CONFIG_PM */ -+ -+ -+ -+/* Wrapper function for workaround port disable registers in USB controller */ -+static void rh_disable_port(unsigned int port) { -+ volatile int timeout = 10000; -+ volatile char* usb_portx_disable; -+ switch(port) { -+ case 0: -+ usb_portx_disable = R_USB_PORT1_DISABLE; -+ break; -+ case 1: -+ usb_portx_disable = R_USB_PORT2_DISABLE; -+ break; -+ default: -+ /* Invalid port index */ -+ return; -+ } -+ /* Set disable flag in special register */ -+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -+ /* Wait until not enabled anymore */ -+ while((rh.wPortStatusPrev[port] & -+ IO_STATE(R_USB_RH_PORT_STATUS_1, enabled, yes)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for port %d to become disabled\n", port); -+ } -+ /* clear disable flag in special register */ -+ *usb_portx_disable = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -+ rh_info("Physical port %d disabled\n", port+1); -+} -+ -+ -+/******************************************************************/ -+/* Transfer Controller (TC) functions */ -+/******************************************************************/ -+ -+/* FIXME: Should RX_BUF_SIZE be a config option, or maybe we should adjust it -+ dynamically? -+ To adjust it dynamically we would have to get an interrupt when we reach -+ the end of the rx descriptor list, or when we get close to the end, and -+ then allocate more descriptors. */ -+#define NBR_OF_RX_DESC 512 -+#define RX_DESC_BUF_SIZE 1024 -+#define RX_BUF_SIZE (NBR_OF_RX_DESC * RX_DESC_BUF_SIZE) -+ -+ -+/* Local variables for Transfer Controller */ -+/* --------------------------------------- */ -+ -+/* This is a circular (double-linked) list of the active urbs for each epid. -+ The head is never removed, and new urbs are linked onto the list as -+ urb_entry_t elements. Don't reference urb_list directly; use the wrapper -+ functions instead (which includes spin_locks) */ -+static struct list_head urb_list[NBR_OF_EPIDS]; -+ -+/* Read about the need and usage of this lock in submit_ctrl_urb. */ -+/* Lock for URB lists for each EPID */ -+static spinlock_t urb_list_lock; -+ -+/* Lock for EPID array register (R_USB_EPT_x) in Etrax */ -+static spinlock_t etrax_epid_lock; -+ -+/* Lock for dma8 sub0 handling */ -+static spinlock_t etrax_dma8_sub0_lock; -+ -+/* DMA IN cache bug. Align the DMA IN buffers to 32 bytes, i.e. a cache line. -+ Since RX_DESC_BUF_SIZE is 1024 is a multiple of 32, all rx buffers will be -+ cache aligned. */ -+static volatile unsigned char RxBuf[RX_BUF_SIZE] __attribute__ ((aligned (32))); -+static volatile struct USB_IN_Desc RxDescList[NBR_OF_RX_DESC] __attribute__ ((aligned (4))); -+ -+/* Pointers into RxDescList. */ -+static volatile struct USB_IN_Desc *myNextRxDesc; -+static volatile struct USB_IN_Desc *myLastRxDesc; -+ -+/* A zout transfer makes a memory access at the address of its buf pointer, -+ which means that setting this buf pointer to 0 will cause an access to the -+ flash. In addition to this, setting sw_len to 0 results in a 16/32 bytes -+ (depending on DMA burst size) transfer. -+ Instead, we set it to 1, and point it to this buffer. */ -+static int zout_buffer[4] __attribute__ ((aligned (4))); -+ -+/* Cache for allocating new EP and SB descriptors. */ -+//static kmem_cache_t *usb_desc_cache; -+static struct kmem_cache *usb_desc_cache; -+ -+/* Cache for the data allocated in the isoc descr top half. */ -+//static kmem_cache_t *isoc_compl_cache; -+static struct kmem_cache *isoc_compl_cache; -+ -+/* Cache for the data allocated when delayed finishing of URBs */ -+//static kmem_cache_t *later_data_cache; -+static struct kmem_cache *later_data_cache; -+ -+/* Counter to keep track of how many Isoc EP we have sat up. Used to enable -+ and disable iso_eof interrupt. We only need these interrupts when we have -+ Isoc data endpoints (consumes CPU cycles). -+ FIXME: This could be more fine granular, so this interrupt is only enabled -+ when we have a In Isoc URB not URB_ISO_ASAP flaged queued. */ -+static int isoc_epid_counter; -+ -+/* Protecting wrapper functions for R_USB_EPT_x */ -+/* -------------------------------------------- */ -+static inline void etrax_epid_set(__u8 index, __u32 data) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ *R_USB_EPT_DATA = data; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline void etrax_epid_clear_error(__u8 index) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ *R_USB_EPT_DATA &= -+ ~(IO_MASK(R_USB_EPT_DATA, error_count_in) | -+ IO_MASK(R_USB_EPT_DATA, error_count_out) | -+ IO_MASK(R_USB_EPT_DATA, error_code)); -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline void etrax_epid_set_toggle(__u8 index, __u8 dirout, -+ __u8 toggle) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ if(dirout) { -+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_out); -+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_out, toggle); -+ } else { -+ *R_USB_EPT_DATA &= ~IO_MASK(R_USB_EPT_DATA, t_in); -+ *R_USB_EPT_DATA |= IO_FIELD(R_USB_EPT_DATA, t_in, toggle); -+ } -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+} -+ -+static inline __u8 etrax_epid_get_toggle(__u8 index, __u8 dirout) { -+ unsigned long flags; -+ __u8 toggle; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ if (dirout) { -+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_out, *R_USB_EPT_DATA); -+ } else { -+ toggle = IO_EXTRACT(R_USB_EPT_DATA, t_in, *R_USB_EPT_DATA); -+ } -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ return toggle; -+} -+ -+ -+static inline __u32 etrax_epid_get(__u8 index) { -+ unsigned long flags; -+ __u32 data; -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, index); -+ nop(); -+ data = *R_USB_EPT_DATA; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ return data; -+} -+ -+ -+ -+ -+/* Main functions for Transfer Controller */ -+/* -------------------------------------- */ -+ -+/* Init structs, memories and lists used by Transfer Controller */ -+int tc_init(struct usb_hcd *hcd) { -+ int i; -+ /* Clear software state info for all epids */ -+ memset(epid_state, 0, sizeof(struct etrax_epid) * NBR_OF_EPIDS); -+ -+ /* Set Invalid and Dummy as being in use and disabled */ -+ epid_state[INVALID_EPID].inuse = 1; -+ epid_state[DUMMY_EPID].inuse = 1; -+ epid_state[INVALID_EPID].disabled = 1; -+ epid_state[DUMMY_EPID].disabled = 1; -+ -+ /* Clear counter for how many Isoc epids we have sat up */ -+ isoc_epid_counter = 0; -+ -+ /* Initialize the urb list by initiating a head for each list. -+ Also reset list hodling active URB for each epid */ -+ for (i = 0; i < NBR_OF_EPIDS; i++) { -+ INIT_LIST_HEAD(&urb_list[i]); -+ activeUrbList[i] = NULL; -+ } -+ -+ /* Init lock for URB lists */ -+ spin_lock_init(&urb_list_lock); -+ /* Init lock for Etrax R_USB_EPT register */ -+ spin_lock_init(&etrax_epid_lock); -+ /* Init lock for Etrax dma8 sub0 handling */ -+ spin_lock_init(&etrax_dma8_sub0_lock); -+ -+ /* We use kmem_cache_* to make sure that all DMA desc. are dword aligned */ -+ -+ /* Note that we specify sizeof(struct USB_EP_Desc) as the size, but also -+ allocate SB descriptors from this cache. This is ok since -+ sizeof(struct USB_EP_Desc) == sizeof(struct USB_SB_Desc). */ -+// usb_desc_cache = kmem_cache_create("usb_desc_cache", -+// sizeof(struct USB_EP_Desc), 0, -+// SLAB_HWCACHE_ALIGN, 0, 0); -+ usb_desc_cache = kmem_cache_create( -+ "usb_desc_cache", -+ sizeof(struct USB_EP_Desc), -+ 0, -+ SLAB_HWCACHE_ALIGN, -+ NULL); -+ if(usb_desc_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ /* Create slab cache for speedy allocation of memory for isoc bottom-half -+ interrupt handling */ -+// isoc_compl_cache = -+// kmem_cache_create("isoc_compl_cache", -+// sizeof(struct crisv10_isoc_complete_data), -+// 0, SLAB_HWCACHE_ALIGN, 0, 0); -+ isoc_compl_cache = kmem_cache_create( -+ "isoc_compl_cache", -+ sizeof(struct crisv10_isoc_complete_data), -+ 0, -+ SLAB_HWCACHE_ALIGN, -+ NULL -+ ); -+ -+ if(isoc_compl_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ /* Create slab cache for speedy allocation of memory for later URB finish -+ struct */ -+// later_data_cache = -+// kmem_cache_create("later_data_cache", -+// sizeof(struct urb_later_data), -+// 0, SLAB_HWCACHE_ALIGN, 0, 0); -+ -+ later_data_cache = kmem_cache_create( -+ "later_data_cache", -+ sizeof(struct urb_later_data), -+ 0, -+ SLAB_HWCACHE_ALIGN, -+ NULL -+ ); -+ -+ if(later_data_cache == NULL) { -+ return -ENOMEM; -+ } -+ -+ -+ /* Initiate the bulk start timer. */ -+ init_timer(&bulk_start_timer); -+ bulk_start_timer.expires = jiffies + BULK_START_TIMER_INTERVAL; -+ bulk_start_timer.function = tc_bulk_start_timer_func; -+ add_timer(&bulk_start_timer); -+ -+ -+ /* Initiate the bulk eot timer. */ -+ init_timer(&bulk_eot_timer); -+ bulk_eot_timer.expires = jiffies + BULK_EOT_TIMER_INTERVAL; -+ bulk_eot_timer.function = tc_bulk_eot_timer_func; -+ bulk_eot_timer.data = (unsigned long)hcd; -+ add_timer(&bulk_eot_timer); -+ -+ return 0; -+} -+ -+/* Uninitialize all resources used by Transfer Controller */ -+void tc_destroy(void) { -+ -+ /* Destroy all slab cache */ -+ kmem_cache_destroy(usb_desc_cache); -+ kmem_cache_destroy(isoc_compl_cache); -+ kmem_cache_destroy(later_data_cache); -+ -+ /* Remove timers */ -+ del_timer(&bulk_start_timer); -+ del_timer(&bulk_eot_timer); -+} -+ -+static void restart_dma8_sub0(void) { -+ unsigned long flags; -+ spin_lock_irqsave(&etrax_dma8_sub0_lock, flags); -+ /* Verify that the dma is not running */ -+ if ((*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd)) == 0) { -+ struct USB_EP_Desc *ep = (struct USB_EP_Desc *)phys_to_virt(*R_DMA_CH8_SUB0_EP); -+ while (DUMMY_EPID == IO_EXTRACT(USB_EP_command, epid, ep->command)) { -+ ep = (struct USB_EP_Desc *)phys_to_virt(ep->next); -+ } -+ /* Advance the DMA to the next EP descriptor that is not a DUMMY_EPID. -+ * ep->next is already a physical address. virt_to_phys is needed, see -+ * http://mhonarc.axis.se/dev-etrax/msg08630.html -+ */ -+ //*R_DMA_CH8_SUB0_EP = ep->next; -+ *R_DMA_CH8_SUB0_EP = virt_to_phys(ep); -+ /* Restart the DMA */ -+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); -+ } -+ spin_unlock_irqrestore(&etrax_dma8_sub0_lock, flags); -+} -+ -+/* queue an URB with the transfer controller (called from hcd_driver) */ -+//static int tc_urb_enqueue(struct usb_hcd *hcd, -+// struct usb_host_endpoint *ep, -+// struct urb *urb, -+// gfp_t mem_flags) { -+static int tc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) -+{ -+ int epid; -+ int retval; -+// int bustime = 0; -+ int maxpacket; -+ unsigned long flags; -+ struct crisv10_urb_priv *urb_priv; -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ DBFENTER; -+ -+ if(!(crisv10_hcd->running)) { -+ /* The USB Controller is not running, probably because no device is -+ attached. No idea to enqueue URBs then */ -+ tc_warn("Rejected enqueueing of URB:0x%x because no dev attached\n", -+ (unsigned int)urb); -+ return -ENOENT; -+ } -+ -+ maxpacket = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+ /* Special case check for In Isoc transfers. Specification states that each -+ In Isoc transfer consists of one packet and therefore it should fit into -+ the transfer-buffer of an URB. -+ We do the check here to be sure (an invalid scenario can be produced with -+ parameters to the usbtest suite) */ -+ if(usb_pipeisoc(urb->pipe) && usb_pipein(urb->pipe) && -+ (urb->transfer_buffer_length < maxpacket)) { -+ tc_err("Submit In Isoc URB with buffer length:%d to pipe with maxpacketlen: %d\n", urb->transfer_buffer_length, maxpacket); -+ return -EMSGSIZE; -+ } -+ -+ /* Check if there is enough bandwidth for periodic transfer */ -+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) { -+ /* only check (and later claim) if not already claimed */ -+ if (urb->bandwidth == 0) { -+ bustime = usb_check_bandwidth(urb->dev, urb); -+ if (bustime < 0) { -+ tc_err("Not enough periodic bandwidth\n"); -+ return -ENOSPC; -+ } -+ } -+ } -+#endif -+ -+ /* Check if there is a epid for URBs destination, if not this function -+ set up one. */ -+ //epid = tc_setup_epid(ep, urb, mem_flags); -+ epid = tc_setup_epid(urb, mem_flags); -+ if (epid < 0) { -+ tc_err("Failed setup epid:%d for URB:0x%x\n", epid, (unsigned int)urb); -+ DBFEXIT; -+ return -ENOMEM; -+ } -+ -+ if(urb == activeUrbList[epid]) { -+ tc_err("Resubmition of allready active URB:0x%x\n", (unsigned int)urb); -+ return -ENXIO; -+ } -+ -+ if(urb_list_entry(urb, epid)) { -+ tc_err("Resubmition of allready queued URB:0x%x\n", (unsigned int)urb); -+ return -ENXIO; -+ } -+ -+ /* If we actively have flaged endpoint as disabled then refuse submition */ -+ if(epid_state[epid].disabled) { -+ return -ENOENT; -+ } -+ -+ /* Allocate and init HC-private data for URB */ -+ if(urb_priv_create(hcd, urb, epid, mem_flags) != 0) { -+ DBFEXIT; -+ return -ENOMEM; -+ } -+ urb_priv = urb->hcpriv; -+ -+ tc_dbg("Enqueue URB:0x%x[%d] epid:%d (%s) bufflen:%d\n", -+ (unsigned int)urb, urb_priv->urb_num, epid, -+ pipe_to_str(urb->pipe), urb->transfer_buffer_length); -+ -+ /* Create and link SBs required for this URB */ -+ retval = create_sb_for_urb(urb, mem_flags); -+ if(retval != 0) { -+ tc_err("Failed to create SBs for URB:0x%x[%d]\n", (unsigned int)urb, -+ urb_priv->urb_num); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ -+ /* Init intr EP pool if this URB is a INTR transfer. This pool is later -+ used when inserting EPs in the TxIntrEPList. We do the alloc here -+ so we can't run out of memory later */ -+ if(usb_pipeint(urb->pipe)) { -+ retval = init_intr_urb(urb, mem_flags); -+ if(retval != 0) { -+ tc_warn("Failed to init Intr URB\n"); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ } -+ -+ /* Disable other access when inserting USB */ -+ -+ /* BUG on sleeping inside int disabled if using local_irq_save/local_irq_restore -+ * her - because urb_list_add() and tc_dma_process_queue() save irqs again !??! -+ */ -+// local_irq_save(flags); -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+ /* Claim bandwidth, if needed */ -+ if(bustime) { -+ usb_claim_bandwidth(urb->dev, urb, bustime, 0); -+ } -+ -+ /* Add URB to EP queue */ -+ urb_list_add(urb, epid, mem_flags); -+ -+ if(usb_pipeisoc(urb->pipe)) { -+ /* Special processing of Isoc URBs. */ -+ tc_dma_process_isoc_urb(urb); -+ } else { -+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ -+ tc_dma_process_queue(epid); -+ } -+#endif -+ /* Add URB to EP queue */ -+ urb_list_add(urb, epid, mem_flags); -+ -+ /*hinko link/unlink urb -> ep */ -+ spin_lock_irqsave(&crisv10_hcd->lock, flags); -+ //spin_lock(&crisv10_hcd->lock); -+ retval = usb_hcd_link_urb_to_ep(hcd, urb); -+ if (retval) { -+ spin_unlock_irqrestore(&crisv10_hcd->lock, flags); -+ tc_warn("Failed to link urb to ep\n"); -+ urb_priv_free(hcd, urb); -+ DBFEXIT; -+ return retval; -+ } -+ spin_unlock_irqrestore(&crisv10_hcd->lock, flags); -+ //spin_unlock(&crisv10_hcd->lock); -+ -+ /* Process EP queue for rest of the URB types (Bulk, Ctrl, Intr) */ -+ tc_dma_process_queue(epid); -+ -+// local_irq_restore(flags); -+ -+ DBFEXIT; -+ return 0; -+} -+ -+/* remove an URB from the transfer controller queues (called from hcd_driver)*/ -+//static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb) -+static int tc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) -+{ -+ struct crisv10_urb_priv *urb_priv; -+ unsigned long flags; -+ int epid; -+ -+ DBFENTER; -+ /* Disable interrupts here since a descriptor interrupt for the isoc epid -+ will modify the sb list. This could possibly be done more granular, but -+ urb_dequeue should not be used frequently anyway. -+ */ -+ local_irq_save(flags); -+ -+ urb_priv = urb->hcpriv; -+ -+ if (!urb_priv) { -+ /* This happens if a device driver calls unlink on an urb that -+ was never submitted (lazy driver) or if the urb was completed -+ while dequeue was being called. */ -+ tc_warn("Dequeing of not enqueued URB:0x%x\n", (unsigned int)urb); -+ local_irq_restore(flags); -+ return 0; -+ } -+ epid = urb_priv->epid; -+ -+ tc_warn("Dequeing %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ /* For Bulk, Ctrl and Intr are only one URB active at a time. So any URB -+ that isn't active can be dequeued by just removing it from the queue */ -+ if(usb_pipebulk(urb->pipe) || usb_pipecontrol(urb->pipe) || -+ usb_pipeint(urb->pipe)) { -+ -+ /* Check if URB haven't gone further than the queue */ -+ if(urb != activeUrbList[epid]) { -+ ASSERT(urb_priv->later_data == NULL); -+ tc_warn("Dequeing URB:0x%x[%d] (%s %s epid:%d) from queue" -+ " (not active)\n", (unsigned int)urb, urb_priv->urb_num, -+ str_dir(urb->pipe), str_type(urb->pipe), epid); -+ -+ /* Finish the URB with error status from USB core */ -+ tc_finish_urb(hcd, urb, urb->status); -+ local_irq_restore(flags); -+ return 0; -+ } -+ } -+ -+ /* Set URB status to Unlink for handling when interrupt comes. */ -+ urb_priv->urb_state = UNLINK; -+ -+ /* Differentiate dequeing of Bulk and Ctrl from Isoc and Intr */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Check if EP still is enabled */ -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ /* Kicking dummy list out of the party. */ -+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -+ break; -+ case PIPE_CONTROL: -+ /* Check if EP still is enabled */ -+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ break; -+ case PIPE_ISOCHRONOUS: -+ /* Disabling, busy-wait and unlinking of Isoc SBs will be done in -+ finish_isoc_urb(). Because there might the case when URB is dequeued -+ but there are other valid URBs waiting */ -+ -+ /* Check if In Isoc EP still is enabled */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ break; -+ case PIPE_INTERRUPT: -+ /* Special care is taken for interrupt URBs. EPs are unlinked in -+ tc_finish_urb */ -+ break; -+ default: -+ break; -+ } -+ -+ /* Asynchronous unlink, finish the URB later from scheduled or other -+ event (data finished, error) */ -+ tc_finish_urb_later(hcd, urb, urb->status); -+ -+ local_irq_restore(flags); -+ DBFEXIT; -+ return 0; -+} -+ -+ -+static void tc_sync_finish_epid(struct usb_hcd *hcd, int epid) { -+ volatile int timeout = 10000; -+ struct urb* urb; -+ struct crisv10_urb_priv* urb_priv; -+ unsigned long flags; -+ -+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ -+ int type = epid_state[epid].type; -+ -+ /* Setting this flag will cause enqueue() to return -ENOENT for new -+ submitions on this endpoint and finish_urb() wont process queue further */ -+ epid_state[epid].disabled = 1; -+ -+ switch(type) { -+ case PIPE_BULK: -+ /* Check if EP still is enabled */ -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxBulkEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); -+ -+ /* Do busy-wait until DMA not using this EP descriptor anymore */ -+ while((*R_DMA_CH8_SUB0_EP == -+ virt_to_phys(&TxBulkEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Bulk to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ -+ case PIPE_CONTROL: -+ /* Check if EP still is enabled */ -+ if (TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ /* The EP was enabled, disable it. */ -+ TxCtrlEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ tc_warn("sync_finish: Disabling EP for epid:%d\n", epid); -+ -+ /* Do busy-wait until DMA not using this EP descriptor anymore */ -+ while((*R_DMA_CH8_SUB1_EP == -+ virt_to_phys(&TxCtrlEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Ctrl to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ -+ case PIPE_INTERRUPT: -+ local_irq_save(flags); -+ /* Disable all Intr EPs belonging to epid */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* Disable EP */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ local_irq_restore(flags); -+ break; -+ -+ case PIPE_ISOCHRONOUS: -+ /* Check if EP still is enabled */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ tc_warn("sync_finish: Disabling Isoc EP for epid:%d\n", epid); -+ /* The EP was enabled, disable it. */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ -+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for" -+ " epid:%d\n", epid); -+ } -+ } -+ break; -+ } -+ -+ local_irq_save(flags); -+ -+ /* Finish if there is active URB for this endpoint */ -+ if(activeUrbList[epid] != NULL) { -+ urb = activeUrbList[epid]; -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv); -+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ tc_finish_urb(hcd, activeUrbList[epid], -ENOENT); -+ ASSERT(activeUrbList[epid] == NULL); -+ } -+ -+ /* Finish any queued URBs for this endpoint. There won't be any resubmitions -+ because epid_disabled causes enqueue() to fail for this endpoint */ -+ while((urb = urb_list_first(epid)) != NULL) { -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ tc_warn("Sync finish %s URB:0x%x[%d] (%s %s epid:%d) status:%d %s\n", -+ (urb == activeUrbList[epid]) ? "active" : "queued", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), epid, urb->status, -+ (urb_priv->later_data) ? "later-sched" : ""); -+ -+ tc_finish_urb(hcd, urb, -ENOENT); -+ } -+ epid_state[epid].disabled = 0; -+ local_irq_restore(flags); -+} -+ -+/* free resources associated with an endpoint (called from hcd_driver) */ -+static void tc_endpoint_disable(struct usb_hcd *hcd, -+ struct usb_host_endpoint *ep) { -+ DBFENTER; -+ /* Only free epid if it has been allocated. We get two endpoint_disable -+ requests for ctrl endpoints so ignore the second one */ -+ if(ep->hcpriv != NULL) { -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ int epid = ep_priv->epid; -+ tc_warn("endpoint_disable ep:0x%x ep-priv:0x%x (%s) (epid:%d freed)\n", -+ (unsigned int)ep, (unsigned int)ep->hcpriv, -+ endpoint_to_str(&(ep->desc)), epid); -+ -+ tc_sync_finish_epid(hcd, epid); -+ -+ ASSERT(activeUrbList[epid] == NULL); -+ ASSERT(list_empty(&urb_list[epid])); -+ -+ tc_free_epid(ep); -+ } else { -+ tc_dbg("endpoint_disable ep:0x%x ep-priv:0x%x (%s)\n", (unsigned int)ep, -+ (unsigned int)ep->hcpriv, endpoint_to_str(&(ep->desc))); -+ } -+ DBFEXIT; -+} -+ -+//static void tc_finish_urb_later_proc(void *data) { -+static void tc_finish_urb_later_proc(struct work_struct *work) { -+ unsigned long flags; -+ //struct urb_later_data* uld = (struct urb_later_data*)data; -+ struct urb_later_data* uld = container_of(work, struct urb_later_data, ws.work); -+ local_irq_save(flags); -+ if(uld->urb == NULL) { -+ late_dbg("Later finish of URB = NULL (allready finished)\n"); -+ } else { -+ struct crisv10_urb_priv* urb_priv = uld->urb->hcpriv; -+ ASSERT(urb_priv); -+ if(urb_priv->urb_num == uld->urb_num) { -+ late_dbg("Later finish of URB:0x%x[%d]\n", (unsigned int)(uld->urb), -+ urb_priv->urb_num); -+ if(uld->status != uld->urb->status) { -+ errno_dbg("Later-finish URB with status:%d, later-status:%d\n", -+ uld->urb->status, uld->status); -+ } -+ if(uld != urb_priv->later_data) { -+ panic("Scheduled uld not same as URBs uld\n"); -+ } -+ tc_finish_urb(uld->hcd, uld->urb, uld->status); -+ } else { -+ late_warn("Ignoring later finish of URB:0x%x[%d]" -+ ", urb_num doesn't match current URB:0x%x[%d]", -+ (unsigned int)(uld->urb), uld->urb_num, -+ (unsigned int)(uld->urb), urb_priv->urb_num); -+ } -+ } -+ local_irq_restore(flags); -+ kmem_cache_free(later_data_cache, uld); -+} -+ -+static void tc_finish_urb_later(struct usb_hcd *hcd, struct urb *urb, -+ int status) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ struct urb_later_data* uld; -+ -+ ASSERT(urb_priv); -+ -+ if(urb_priv->later_data != NULL) { -+ /* Later-finish allready scheduled for this URB, just update status to -+ return when finishing later */ -+ errno_dbg("Later-finish schedule change URB status:%d with new" -+ " status:%d\n", urb_priv->later_data->status, status); -+ -+ urb_priv->later_data->status = status; -+ return; -+ } -+ -+ uld = kmem_cache_alloc(later_data_cache, GFP_ATOMIC); -+ ASSERT(uld); -+ -+ uld->hcd = hcd; -+ uld->urb = urb; -+ uld->urb_num = urb_priv->urb_num; -+ uld->status = status; -+ -+ //INIT_WORK(&uld->ws, tc_finish_urb_later_proc, uld); -+ INIT_DELAYED_WORK(&uld->ws, tc_finish_urb_later_proc); -+ urb_priv->later_data = uld; -+ -+ /* Schedule the finishing of the URB to happen later */ -+ schedule_delayed_work(&uld->ws, LATER_TIMER_DELAY); -+} -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, -+ int status); -+#endif -+ -+static void tc_finish_urb(struct usb_hcd *hcd, struct urb *urb, int status) { -+ struct crisv10_hcd* crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid; -+ char toggle; -+ int urb_num; -+ -+ DBFENTER; -+ ASSERT(urb_priv != NULL); -+ epid = urb_priv->epid; -+ urb_num = urb_priv->urb_num; -+ -+ if(urb != activeUrbList[epid]) { -+ if(urb_list_entry(urb, epid)) { -+ /* Remove this URB from the list. Only happens when URB are finished -+ before having been processed (dequeing) */ -+ urb_list_del(urb, epid); -+ } else { -+ tc_warn("Finishing of URB:0x%x[%d] neither active or in queue for" -+ " epid:%d\n", (unsigned int)urb, urb_num, epid); -+ } -+ } -+ -+ /* Cancel any pending later-finish of this URB */ -+ if(urb_priv->later_data) { -+ urb_priv->later_data->urb = NULL; -+ } -+ -+ /* For an IN pipe, we always set the actual length, regardless of whether -+ there was an error or not (which means the device driver can use the data -+ if it wants to). */ -+ if(usb_pipein(urb->pipe)) { -+ urb->actual_length = urb_priv->rx_offset; -+ } else { -+ /* Set actual_length for OUT urbs also; the USB mass storage driver seems -+ to want that. */ -+ if (status == 0 && urb->status == -EINPROGRESS) { -+ urb->actual_length = urb->transfer_buffer_length; -+ } else { -+ /* We wouldn't know of any partial writes if there was an error. */ -+ urb->actual_length = 0; -+ } -+ } -+ -+ -+ /* URB status mangling */ -+ if(urb->status == -EINPROGRESS) { -+ /* The USB core hasn't changed the status, let's set our finish status */ -+ urb->status = status; -+ -+ if ((status == 0) && (urb->transfer_flags & URB_SHORT_NOT_OK) && -+ usb_pipein(urb->pipe) && -+ (urb->actual_length != urb->transfer_buffer_length)) { -+ /* URB_SHORT_NOT_OK means that short reads (shorter than the endpoint's -+ max length) is to be treated as an error. */ -+ errno_dbg("Finishing URB:0x%x[%d] with SHORT_NOT_OK flag and short" -+ " data:%d\n", (unsigned int)urb, urb_num, -+ urb->actual_length); -+ urb->status = -EREMOTEIO; -+ } -+ -+ if(urb_priv->urb_state == UNLINK) { -+ /* URB has been requested to be unlinked asynchronously */ -+ urb->status = -ECONNRESET; -+ errno_dbg("Fixing unlink status of URB:0x%x[%d] to:%d\n", -+ (unsigned int)urb, urb_num, urb->status); -+ } -+ } else { -+ /* The USB Core wants to signal some error via the URB, pass it through */ -+ } -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+ /* use completely different finish function for Isoc URBs */ -+ if(usb_pipeisoc(urb->pipe)) { -+ tc_finish_isoc_urb(hcd, urb, status); -+ return; -+ } -+#endif -+ -+ /* Do special unlinking of EPs for Intr traffic */ -+ if(usb_pipeint(urb->pipe)) { -+ tc_dma_unlink_intr_urb(urb); -+ } -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+ /* Release allocated bandwidth for periodic transfers */ -+ if(usb_pipeint(urb->pipe) || usb_pipeisoc(urb->pipe)) -+ usb_release_bandwidth(urb->dev, urb, 0); -+#endif -+ -+ /* This URB is active on EP */ -+ if(urb == activeUrbList[epid]) { -+ /* We need to fiddle with the toggle bits because the hardware doesn't do -+ it for us. */ -+ toggle = etrax_epid_get_toggle(epid, usb_pipeout(urb->pipe)); -+ usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), -+ usb_pipeout(urb->pipe), toggle); -+ -+ /* Checks for Ctrl and Bulk EPs */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Check so Bulk EP realy is disabled before finishing active URB */ -+ ASSERT((TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) == -+ IO_STATE(USB_EP_command, enable, no)); -+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to -+ process Bulk EP. */ -+ TxBulkEPList[epid].sub = 0; -+ /* No need to wait for the DMA before changing the next pointer. -+ The modulo NBR_OF_EPIDS isn't actually necessary, since we will never use -+ the last one (INVALID_EPID) for actual traffic. */ -+ TxBulkEPList[epid].next = -+ virt_to_phys(&TxBulkEPList[(epid + 1) % NBR_OF_EPIDS]); -+ break; -+ case PIPE_CONTROL: -+ /* Check so Ctrl EP realy is disabled before finishing active URB */ -+ ASSERT((TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) == -+ IO_STATE(USB_EP_command, enable, no)); -+ /* Disable sub-pointer for EP to avoid next tx_interrupt() to -+ process Ctrl EP. */ -+ TxCtrlEPList[epid].sub = 0; -+ break; -+ } -+ } -+ -+ /* Free HC-private URB data*/ -+ urb_priv_free(hcd, urb); -+ -+ if(urb->status) { -+ errno_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", -+ (unsigned int)urb, urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb->actual_length, urb->status); -+ } else { -+ tc_dbg("finish_urb (URB:0x%x[%d] %s %s) (data:%d) status:%d\n", -+ (unsigned int)urb, urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb->actual_length, urb->status); -+ } -+ -+ /* If we just finished an active URB, clear active pointer. */ -+ if (urb == activeUrbList[epid]) { -+ /* Make URB not active on EP anymore */ -+ activeUrbList[epid] = NULL; -+ -+ if(urb->status == 0) { -+ /* URB finished sucessfully, process queue to see if there are any more -+ URBs waiting before we call completion function.*/ -+ if(crisv10_hcd->running) { -+ /* Only process queue if USB controller is running */ -+ tc_dma_process_queue(epid); -+ } else { -+ tc_warn("No processing of queue for epid:%d, USB Controller not" -+ " running\n", epid); -+ } -+ } -+ } -+ -+ /* Hand the URB from HCD to its USB device driver, using its completion -+ functions */ -+// usb_hcd_giveback_urb (hcd, urb); -+ /** -+ * usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue -+ * @hcd: host controller to which @urb was submitted -+ * @urb: URB being unlinked -+ * -+ * Host controller drivers should call this routine before calling -+ * usb_hcd_giveback_urb(). The HCD's private spinlock must be held and -+ * interrupts must be disabled. The actions carried out here are required -+ * for URB completion. -+ */ -+ -+ /*hinko link/unlink urb -> ep */ -+ //spin_lock(&crisv10_hcd->lock); -+ unsigned long flags; -+ spin_lock_irqsave(&crisv10_hcd->lock, flags); -+ usb_hcd_unlink_urb_from_ep(hcd, urb); -+ usb_hcd_giveback_urb(hcd, urb, status); -+ //spin_unlock(&crisv10_hcd->lock); -+ spin_unlock_irqrestore(&crisv10_hcd->lock, flags); -+ -+ /* Check the queue once more if the URB returned with error, because we -+ didn't do it before the completion function because the specification -+ states that the queue should not restart until all it's unlinked -+ URBs have been fully retired, with the completion functions run */ -+ if(crisv10_hcd->running) { -+ /* Only process queue if USB controller is running */ -+ tc_dma_process_queue(epid); -+ } else { -+ tc_warn("No processing of queue for epid:%d, USB Controller not running\n", -+ epid); -+ } -+ -+ DBFEXIT; -+} -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+static void tc_finish_isoc_urb(struct usb_hcd *hcd, struct urb *urb, -+ int status) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid, i; -+ volatile int timeout = 10000; -+ -+ ASSERT(urb_priv); -+ epid = urb_priv->epid; -+ -+ ASSERT(usb_pipeisoc(urb->pipe)); -+ -+ /* Set that all isoc packets have status and length set before -+ completing the urb. */ -+ for (i = urb_priv->isoc_packet_counter; i < urb->number_of_packets; i++){ -+ urb->iso_frame_desc[i].actual_length = 0; -+ urb->iso_frame_desc[i].status = -EPROTO; -+ } -+ -+ /* Check if the URB is currently active (done or error) */ -+ if(urb == activeUrbList[epid]) { -+ /* Check if there are another In Isoc URB queued for this epid */ -+ if (!list_empty(&urb_list[epid])&& !epid_state[epid].disabled) { -+ /* Move it from queue to active and mark it started so Isoc transfers -+ won't be interrupted. -+ All Isoc URBs data transfers are already added to DMA lists so we -+ don't have to insert anything in DMA lists here. */ -+ activeUrbList[epid] = urb_list_first(epid); -+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_state = -+ STARTED; -+ urb_list_del(activeUrbList[epid], epid); -+ -+ if(urb->status) { -+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" -+ " status:%d, new waiting URB:0x%x[%d]\n", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb_priv->isoc_packet_counter, -+ urb->number_of_packets, urb->status, -+ (unsigned int)activeUrbList[epid], -+ ((struct crisv10_urb_priv *)(activeUrbList[epid]->hcpriv))->urb_num); -+ } -+ -+ } else { /* No other URB queued for this epid */ -+ if(urb->status) { -+ errno_dbg("finish_isoc_urb (URB:0x%x[%d] %s %s) (%d of %d packets)" -+ " status:%d, no new URB waiting\n", -+ (unsigned int)urb, urb_priv->urb_num, str_dir(urb->pipe), -+ str_type(urb->pipe), urb_priv->isoc_packet_counter, -+ urb->number_of_packets, urb->status); -+ } -+ -+ /* Check if EP is still enabled, then shut it down. */ -+ if (TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ isoc_dbg("Isoc EP enabled for epid:%d, disabling it\n", epid); -+ -+ /* Should only occur for In Isoc EPs where SB isn't consumed. */ -+ ASSERT(usb_pipein(urb->pipe)); -+ -+ /* Disable it and wait for it to stop */ -+ TxIsocEPList[epid].command &= ~IO_MASK(USB_EP_command, enable); -+ -+ /* Ah, the luxury of busy-wait. */ -+ while((*R_DMA_CH8_SUB3_EP == virt_to_phys(&TxIsocEPList[epid])) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Isoc to leave EP for epid:%d\n", epid); -+ } -+ } -+ -+ /* Unlink SB to say that epid is finished. */ -+ TxIsocEPList[epid].sub = 0; -+ TxIsocEPList[epid].hw_len = 0; -+ -+ /* No URB active for EP anymore */ -+ activeUrbList[epid] = NULL; -+ } -+ } else { /* Finishing of not active URB (queued up with SBs thought) */ -+ isoc_warn("finish_isoc_urb (URB:0x%x %s) (%d of %d packets) status:%d," -+ " SB queued but not active\n", -+ (unsigned int)urb, str_dir(urb->pipe), -+ urb_priv->isoc_packet_counter, urb->number_of_packets, -+ urb->status); -+ if(usb_pipeout(urb->pipe)) { -+ /* Finishing of not yet active Out Isoc URB needs unlinking of SBs. */ -+ struct USB_SB_Desc *iter_sb, *prev_sb, *next_sb; -+ -+ iter_sb = TxIsocEPList[epid].sub ? -+ phys_to_virt(TxIsocEPList[epid].sub) : 0; -+ prev_sb = 0; -+ -+ /* SB that is linked before this URBs first SB */ -+ while (iter_sb && (iter_sb != urb_priv->first_sb)) { -+ prev_sb = iter_sb; -+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } -+ -+ if (iter_sb == 0) { -+ /* Unlink of the URB currently being transmitted. */ -+ prev_sb = 0; -+ iter_sb = TxIsocEPList[epid].sub ? phys_to_virt(TxIsocEPList[epid].sub) : 0; -+ } -+ -+ while (iter_sb && (iter_sb != urb_priv->last_sb)) { -+ iter_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } -+ -+ if (iter_sb) { -+ next_sb = iter_sb->next ? phys_to_virt(iter_sb->next) : 0; -+ } else { -+ /* This should only happen if the DMA has completed -+ processing the SB list for this EP while interrupts -+ are disabled. */ -+ isoc_dbg("Isoc urb not found, already sent?\n"); -+ next_sb = 0; -+ } -+ if (prev_sb) { -+ prev_sb->next = next_sb ? virt_to_phys(next_sb) : 0; -+ } else { -+ TxIsocEPList[epid].sub = next_sb ? virt_to_phys(next_sb) : 0; -+ } -+ } -+ } -+ -+ /* Free HC-private URB data*/ -+ urb_priv_free(hcd, urb); -+ -+ usb_release_bandwidth(urb->dev, urb, 0); -+ -+ /* Hand the URB from HCD to its USB device driver, using its completion -+ functions */ -+ usb_hcd_giveback_urb (hcd, urb); -+} -+#endif -+ -+static __u32 urb_num = 0; -+ -+/* allocate and initialize URB private data */ -+static int urb_priv_create(struct usb_hcd *hcd, struct urb *urb, int epid, -+ int mem_flags) { -+ struct crisv10_urb_priv *urb_priv; -+ -+ urb_priv = kmalloc(sizeof *urb_priv, mem_flags); -+ if (!urb_priv) -+ return -ENOMEM; -+ memset(urb_priv, 0, sizeof *urb_priv); -+ -+ urb_priv->epid = epid; -+ urb_priv->urb_state = NOT_STARTED; -+ -+ urb->hcpriv = urb_priv; -+ /* Assign URB a sequence number, and increment counter */ -+ urb_priv->urb_num = urb_num; -+ urb_num++; -+ return 0; -+} -+ -+/* free URB private data */ -+static void urb_priv_free(struct usb_hcd *hcd, struct urb *urb) { -+ int i; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ ASSERT(urb_priv != 0); -+ -+ /* Check it has any SBs linked that needs to be freed*/ -+ if(urb_priv->first_sb != NULL) { -+ struct USB_SB_Desc *next_sb, *first_sb, *last_sb; -+ int i = 0; -+ first_sb = urb_priv->first_sb; -+ last_sb = urb_priv->last_sb; -+ ASSERT(last_sb); -+ while(first_sb != last_sb) { -+ next_sb = (struct USB_SB_Desc *)phys_to_virt(first_sb->next); -+ kmem_cache_free(usb_desc_cache, first_sb); -+ first_sb = next_sb; -+ i++; -+ } -+ kmem_cache_free(usb_desc_cache, last_sb); -+ i++; -+ } -+ -+ /* Check if it has any EPs in its Intr pool that also needs to be freed */ -+ if(urb_priv->intr_ep_pool_length > 0) { -+ for(i = 0; i < urb_priv->intr_ep_pool_length; i++) { -+ kfree(urb_priv->intr_ep_pool[i]); -+ } -+ /* -+ tc_dbg("Freed %d EPs from URB:0x%x EP pool\n", -+ urb_priv->intr_ep_pool_length, (unsigned int)urb); -+ */ -+ } -+ -+ kfree(urb_priv); -+ urb->hcpriv = NULL; -+} -+ -+static int ep_priv_create(struct usb_host_endpoint *ep, int mem_flags) { -+ struct crisv10_ep_priv *ep_priv; -+ -+ ep_priv = kmalloc(sizeof *ep_priv, mem_flags); -+ if (!ep_priv) -+ return -ENOMEM; -+ memset(ep_priv, 0, sizeof *ep_priv); -+ -+ ep->hcpriv = ep_priv; -+ return 0; -+} -+ -+static void ep_priv_free(struct usb_host_endpoint *ep) { -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ ASSERT(ep_priv); -+ kfree(ep_priv); -+ ep->hcpriv = NULL; -+} -+ -+/* EPID handling functions, managing EP-list in Etrax through wrappers */ -+/* ------------------------------------------------------------------- */ -+ -+/* Sets up a new EPID for an endpoint or returns existing if found */ -+//static int tc_setup_epid(struct usb_host_endpoint *ep, struct urb *urb, -+// int mem_flags) { -+static int tc_setup_epid(struct urb *urb, int mem_flags) -+{ -+ int epid; -+ char devnum, endpoint, out_traffic, slow; -+ int maxlen; -+ __u32 epid_data; -+ struct usb_host_endpoint *ep = urb->ep; -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ -+ DBFENTER; -+ -+ /* Check if a valid epid already is setup for this endpoint */ -+ if(ep_priv != NULL) { -+ return ep_priv->epid; -+ } -+ -+ /* We must find and initiate a new epid for this urb. */ -+ epid = tc_allocate_epid(); -+ -+ if (epid == -1) { -+ /* Failed to allocate a new epid. */ -+ DBFEXIT; -+ return epid; -+ } -+ -+ /* We now have a new epid to use. Claim it. */ -+ epid_state[epid].inuse = 1; -+ -+ /* Init private data for new endpoint */ -+ if(ep_priv_create(ep, mem_flags) != 0) { -+ return -ENOMEM; -+ } -+ ep_priv = ep->hcpriv; -+ ep_priv->epid = epid; -+ -+ devnum = usb_pipedevice(urb->pipe); -+ endpoint = usb_pipeendpoint(urb->pipe); -+ slow = (urb->dev->speed == USB_SPEED_LOW); -+ maxlen = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); -+ -+ if (usb_pipetype(urb->pipe) == PIPE_CONTROL) { -+ /* We want both IN and OUT control traffic to be put on the same -+ EP/SB list. */ -+ out_traffic = 1; -+ } else { -+ out_traffic = usb_pipeout(urb->pipe); -+ } -+ -+ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { -+ epid_data = IO_STATE(R_USB_EPT_DATA_ISO, valid, yes) | -+ /* FIXME: Change any to the actual port? */ -+ IO_STATE(R_USB_EPT_DATA_ISO, port, any) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, max_len, maxlen) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, ep, endpoint) | -+ IO_FIELD(R_USB_EPT_DATA_ISO, dev, devnum); -+ etrax_epid_iso_set(epid, epid_data); -+ } else { -+ epid_data = IO_STATE(R_USB_EPT_DATA, valid, yes) | -+ IO_FIELD(R_USB_EPT_DATA, low_speed, slow) | -+ /* FIXME: Change any to the actual port? */ -+ IO_STATE(R_USB_EPT_DATA, port, any) | -+ IO_FIELD(R_USB_EPT_DATA, max_len, maxlen) | -+ IO_FIELD(R_USB_EPT_DATA, ep, endpoint) | -+ IO_FIELD(R_USB_EPT_DATA, dev, devnum); -+ etrax_epid_set(epid, epid_data); -+ } -+ -+ epid_state[epid].out_traffic = out_traffic; -+ epid_state[epid].type = usb_pipetype(urb->pipe); -+ -+ tc_warn("Setting up ep:0x%x epid:%d (addr:%d endp:%d max_len:%d %s %s %s)\n", -+ (unsigned int)ep, epid, devnum, endpoint, maxlen, -+ str_type(urb->pipe), out_traffic ? "out" : "in", -+ slow ? "low" : "full"); -+ -+ /* Enable Isoc eof interrupt if we set up the first Isoc epid */ -+ if(usb_pipeisoc(urb->pipe)) { -+ isoc_epid_counter++; -+ if(isoc_epid_counter == 1) { -+ isoc_warn("Enabled Isoc eof interrupt\n"); -+ *R_USB_IRQ_MASK_SET |= IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); -+ } -+ } -+ -+ DBFEXIT; -+ return epid; -+} -+ -+static void tc_free_epid(struct usb_host_endpoint *ep) { -+ unsigned long flags; -+ struct crisv10_ep_priv *ep_priv = ep->hcpriv; -+ int epid; -+ volatile int timeout = 10000; -+ -+ DBFENTER; -+ -+ if (ep_priv == NULL) { -+ tc_warn("Trying to free unused epid on ep:0x%x\n", (unsigned int)ep); -+ DBFEXIT; -+ return; -+ } -+ -+ epid = ep_priv->epid; -+ -+ /* Disable Isoc eof interrupt if we free the last Isoc epid */ -+ if(epid_isoc(epid)) { -+ ASSERT(isoc_epid_counter > 0); -+ isoc_epid_counter--; -+ if(isoc_epid_counter == 0) { -+ *R_USB_IRQ_MASK_SET &= ~IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set); -+ isoc_warn("Disabled Isoc eof interrupt\n"); -+ } -+ } -+ -+ /* Take lock manualy instead of in epid_x_x wrappers, -+ because we need to be polling here */ -+ spin_lock_irqsave(&etrax_epid_lock, flags); -+ -+ *R_USB_EPT_INDEX = IO_FIELD(R_USB_EPT_INDEX, value, epid); -+ nop(); -+ while((*R_USB_EPT_DATA & IO_MASK(R_USB_EPT_DATA, hold)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for epid:%d to drop hold\n", epid); -+ } -+ /* This will, among other things, set the valid field to 0. */ -+ *R_USB_EPT_DATA = 0; -+ spin_unlock_irqrestore(&etrax_epid_lock, flags); -+ -+ /* Free resource in software state info list */ -+ epid_state[epid].inuse = 0; -+ -+ /* Free private endpoint data */ -+ ep_priv_free(ep); -+ -+ DBFEXIT; -+} -+ -+static int tc_allocate_epid(void) { -+ int i; -+ DBFENTER; -+ for (i = 0; i < NBR_OF_EPIDS; i++) { -+ if (!epid_inuse(i)) { -+ DBFEXIT; -+ return i; -+ } -+ } -+ -+ tc_warn("Found no free epids\n"); -+ DBFEXIT; -+ return -1; -+} -+ -+ -+/* Wrappers around the list functions (include/linux/list.h). */ -+/* ---------------------------------------------------------- */ -+static inline int __urb_list_empty(int epid) { -+ int retval; -+ retval = list_empty(&urb_list[epid]); -+ return retval; -+} -+ -+/* Returns first urb for this epid, or NULL if list is empty. */ -+static inline struct urb *urb_list_first(int epid) { -+ unsigned long flags; -+ struct urb *first_urb = 0; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ if (!__urb_list_empty(epid)) { -+ /* Get the first urb (i.e. head->next). */ -+ urb_entry_t *urb_entry = list_entry((&urb_list[epid])->next, urb_entry_t, list); -+ first_urb = urb_entry->urb; -+ } -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return first_urb; -+} -+ -+/* Adds an urb_entry last in the list for this epid. */ -+static inline void urb_list_add(struct urb *urb, int epid, int mem_flags) { -+ unsigned long flags; -+ urb_entry_t *urb_entry = (urb_entry_t *)kmalloc(sizeof(urb_entry_t), mem_flags); -+ ASSERT(urb_entry); -+ -+ urb_entry->urb = urb; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ list_add_tail(&urb_entry->list, &urb_list[epid]); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+} -+ -+/* Search through the list for an element that contains this urb. (The list -+ is expected to be short and the one we are about to delete will often be -+ the first in the list.) -+ Should be protected by spin_locks in calling function */ -+static inline urb_entry_t *__urb_list_entry(struct urb *urb, int epid) { -+ struct list_head *entry; -+ struct list_head *tmp; -+ urb_entry_t *urb_entry; -+ -+ list_for_each_safe(entry, tmp, &urb_list[epid]) { -+ urb_entry = list_entry(entry, urb_entry_t, list); -+ ASSERT(urb_entry); -+ ASSERT(urb_entry->urb); -+ -+ if (urb_entry->urb == urb) { -+ return urb_entry; -+ } -+ } -+ return 0; -+} -+ -+/* Same function as above but for global use. Protects list by spinlock */ -+static inline urb_entry_t *urb_list_entry(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return (urb_entry); -+} -+ -+/* Delete an urb from the list. */ -+static inline void urb_list_del(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ /* Delete entry and free. */ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ list_del(&urb_entry->list); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ kfree(urb_entry); -+} -+ -+/* Move an urb to the end of the list. */ -+static inline void urb_list_move_last(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ list_del(&urb_entry->list); -+ list_add_tail(&urb_entry->list, &urb_list[epid]); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+} -+ -+/* Get the next urb in the list. */ -+static inline struct urb *urb_list_next(struct urb *urb, int epid) { -+ unsigned long flags; -+ urb_entry_t *urb_entry; -+ -+ spin_lock_irqsave(&urb_list_lock, flags); -+ urb_entry = __urb_list_entry(urb, epid); -+ ASSERT(urb_entry); -+ -+ if (urb_entry->list.next != &urb_list[epid]) { -+ struct list_head *elem = urb_entry->list.next; -+ urb_entry = list_entry(elem, urb_entry_t, list); -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return urb_entry->urb; -+ } else { -+ spin_unlock_irqrestore(&urb_list_lock, flags); -+ return NULL; -+ } -+} -+ -+struct USB_EP_Desc* create_ep(int epid, struct USB_SB_Desc* sb_desc, -+ int mem_flags) { -+ struct USB_EP_Desc *ep_desc; -+ ep_desc = (struct USB_EP_Desc *) kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(ep_desc == NULL) -+ return NULL; -+ memset(ep_desc, 0, sizeof(struct USB_EP_Desc)); -+ -+ ep_desc->hw_len = 0; -+ ep_desc->command = (IO_FIELD(USB_EP_command, epid, epid) | -+ IO_STATE(USB_EP_command, enable, yes)); -+ if(sb_desc == NULL) { -+ ep_desc->sub = 0; -+ } else { -+ ep_desc->sub = virt_to_phys(sb_desc); -+ } -+ return ep_desc; -+} -+ -+#define TT_ZOUT 0 -+#define TT_IN 1 -+#define TT_OUT 2 -+#define TT_SETUP 3 -+ -+#define CMD_EOL IO_STATE(USB_SB_command, eol, yes) -+#define CMD_INTR IO_STATE(USB_SB_command, intr, yes) -+#define CMD_FULL IO_STATE(USB_SB_command, full, yes) -+ -+/* Allocation and setup of a generic SB. Used to create SETUP, OUT and ZOUT -+ SBs. Also used by create_sb_in() to avoid same allocation procedure at two -+ places */ -+struct USB_SB_Desc* create_sb(struct USB_SB_Desc* sb_prev, int tt, void* data, -+ int datalen, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ memset(sb_desc, 0, sizeof(struct USB_SB_Desc)); -+ -+ sb_desc->command = IO_FIELD(USB_SB_command, tt, tt) | -+ IO_STATE(USB_SB_command, eot, yes); -+ -+ sb_desc->sw_len = datalen; -+ if(data != NULL) { -+ sb_desc->buf = virt_to_phys(data); -+ } else { -+ sb_desc->buf = 0; -+ } -+ if(sb_prev != NULL) { -+ sb_prev->next = virt_to_phys(sb_desc); -+ } -+ return sb_desc; -+} -+ -+/* Creates a copy of an existing SB by allocation space for it and copy -+ settings */ -+struct USB_SB_Desc* create_sb_copy(struct USB_SB_Desc* sb_orig, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = (struct USB_SB_Desc*)kmem_cache_alloc(usb_desc_cache, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ -+ memcpy(sb_desc, sb_orig, sizeof(struct USB_SB_Desc)); -+ return sb_desc; -+} -+ -+/* A specific create_sb function for creation of in SBs. This is due to -+ that datalen in In SBs shows how many packets we are expecting. It also -+ sets up the rem field to show if how many bytes we expect in last packet -+ if it's not a full one */ -+struct USB_SB_Desc* create_sb_in(struct USB_SB_Desc* sb_prev, int datalen, -+ int maxlen, int mem_flags) { -+ struct USB_SB_Desc *sb_desc; -+ sb_desc = create_sb(sb_prev, TT_IN, NULL, -+ datalen ? (datalen - 1) / maxlen + 1 : 0, mem_flags); -+ if(sb_desc == NULL) -+ return NULL; -+ sb_desc->command |= IO_FIELD(USB_SB_command, rem, datalen % maxlen); -+ return sb_desc; -+} -+ -+void set_sb_cmds(struct USB_SB_Desc *sb_desc, __u16 flags) { -+ sb_desc->command |= flags; -+} -+ -+int create_sb_for_urb(struct urb *urb, int mem_flags) { -+ int is_out = !usb_pipein(urb->pipe); -+ int type = usb_pipetype(urb->pipe); -+ int maxlen = usb_maxpacket(urb->dev, urb->pipe, is_out); -+ int buf_len = urb->transfer_buffer_length; -+ void *buf = buf_len > 0 ? urb->transfer_buffer : NULL; -+ struct USB_SB_Desc *sb_desc = NULL; -+ -+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv != NULL); -+ -+ switch(type) { -+ case PIPE_CONTROL: -+ /* Setup stage */ -+ sb_desc = create_sb(NULL, TT_SETUP, urb->setup_packet, 8, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ -+ /* Attach first SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ -+ if (is_out) { /* Out Control URB */ -+ /* If this Control OUT transfer has an optional data stage we add -+ an OUT token before the mandatory IN (status) token */ -+ if ((buf_len > 0) && buf) { -+ sb_desc = create_sb(sb_desc, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ -+ /* Status stage */ -+ /* The data length has to be exactly 1. This is due to a requirement -+ of the USB specification that a host must be prepared to receive -+ data in the status phase */ -+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } else { /* In control URB */ -+ /* Data stage */ -+ sb_desc = create_sb_in(sb_desc, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* Status stage */ -+ /* Read comment at zout_buffer declaration for an explanation to this. */ -+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* Set descriptor interrupt flag for in URBs so we can finish URB after -+ zout-packet has been sent */ -+ set_sb_cmds(sb_desc, CMD_INTR | CMD_FULL); -+ } -+ /* Set end-of-list flag in last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ /* Attach last SB to URB */ -+ urb_priv->last_sb = sb_desc; -+ break; -+ -+ case PIPE_BULK: -+ if (is_out) { /* Out Bulk URB */ -+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* The full field is set to yes, even if we don't actually check that -+ this is a full-length transfer (i.e., that transfer_buffer_length % -+ maxlen = 0). -+ Setting full prevents the USB controller from sending an empty packet -+ in that case. However, if URB_ZERO_PACKET was set we want that. */ -+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ } else { /* In Bulk URB */ -+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } -+ /* Set end-of-list flag for last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ break; -+ -+ case PIPE_INTERRUPT: -+ if(is_out) { /* Out Intr URB */ -+ sb_desc = create_sb(NULL, TT_OUT, buf, buf_len, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* The full field is set to yes, even if we don't actually check that -+ this is a full-length transfer (i.e., that transfer_buffer_length % -+ maxlen = 0). -+ Setting full prevents the USB controller from sending an empty packet -+ in that case. However, if URB_ZERO_PACKET was set we want that. */ -+ if (!(urb->transfer_flags & URB_ZERO_PACKET)) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ /* Only generate TX interrupt if it's a Out URB*/ -+ set_sb_cmds(sb_desc, CMD_INTR); -+ -+ } else { /* In Intr URB */ -+ sb_desc = create_sb_in(NULL, buf_len, maxlen, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ } -+ /* Set end-of-list flag for last SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ -+ break; -+ case PIPE_ISOCHRONOUS: -+ if(is_out) { /* Out Isoc URB */ -+ int i; -+ if(urb->number_of_packets == 0) { -+ tc_err("Can't create SBs for Isoc URB with zero packets\n"); -+ return -EPIPE; -+ } -+ /* Create one SB descriptor for each packet and link them together. */ -+ for(i = 0; i < urb->number_of_packets; i++) { -+ if (urb->iso_frame_desc[i].length > 0) { -+ -+ sb_desc = create_sb(sb_desc, TT_OUT, urb->transfer_buffer + -+ urb->iso_frame_desc[i].offset, -+ urb->iso_frame_desc[i].length, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ -+ /* Check if it's a full length packet */ -+ if (urb->iso_frame_desc[i].length == -+ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))) { -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ -+ } else { /* zero length packet */ -+ sb_desc = create_sb(sb_desc, TT_ZOUT, &zout_buffer[0], 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ set_sb_cmds(sb_desc, CMD_FULL); -+ } -+ /* Attach first SB descriptor to URB */ -+ if (i == 0) { -+ urb_priv->first_sb = sb_desc; -+ } -+ } -+ /* Set interrupt and end-of-list flags in last SB */ -+ set_sb_cmds(sb_desc, CMD_INTR | CMD_EOL); -+ /* Attach last SB descriptor to URB */ -+ urb_priv->last_sb = sb_desc; -+ tc_dbg("Created %d out SBs for Isoc URB:0x%x\n", -+ urb->number_of_packets, (unsigned int)urb); -+ } else { /* In Isoc URB */ -+ /* Actual number of packets is not relevant for periodic in traffic as -+ long as it is more than zero. Set to 1 always. */ -+ sb_desc = create_sb(sb_desc, TT_IN, NULL, 1, mem_flags); -+ if(sb_desc == NULL) -+ return -ENOMEM; -+ /* Set end-of-list flags for SB */ -+ set_sb_cmds(sb_desc, CMD_EOL); -+ -+ /* Attach SB to URB */ -+ urb_priv->first_sb = sb_desc; -+ urb_priv->last_sb = sb_desc; -+ } -+ break; -+ default: -+ tc_err("Unknown pipe-type\n"); -+ return -EPIPE; -+ break; -+ } -+ return 0; -+} -+ -+int init_intr_urb(struct urb *urb, int mem_flags) { -+ struct crisv10_urb_priv *urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ struct USB_EP_Desc* ep_desc; -+ int interval; -+ int i; -+ int ep_count; -+ -+ ASSERT(urb_priv != NULL); -+ ASSERT(usb_pipeint(urb->pipe)); -+ /* We can't support interval longer than amount of eof descriptors in -+ TxIntrEPList */ -+ if(urb->interval > MAX_INTR_INTERVAL) { -+ tc_err("Interrupt interval %dms too big (max: %dms)\n", urb->interval, -+ MAX_INTR_INTERVAL); -+ return -EINVAL; -+ } -+ -+ /* We assume that the SB descriptors already have been setup */ -+ ASSERT(urb_priv->first_sb != NULL); -+ -+ /* Round of the interval to 2^n, it is obvious that this code favours -+ smaller numbers, but that is actually a good thing */ -+ /* FIXME: The "rounding error" for larger intervals will be quite -+ large. For in traffic this shouldn't be a problem since it will only -+ mean that we "poll" more often. */ -+ interval = urb->interval; -+ for (i = 0; interval; i++) { -+ interval = interval >> 1; -+ } -+ urb_priv->interval = 1 << (i - 1); -+ -+ /* We can only have max interval for Out Interrupt due to that we can only -+ handle one linked in EP for a certain epid in the Intr descr array at the -+ time. The USB Controller in the Etrax 100LX continues to process Intr EPs -+ so we have no way of knowing which one that caused the actual transfer if -+ we have several linked in. */ -+ if(usb_pipeout(urb->pipe)) { -+ urb_priv->interval = MAX_INTR_INTERVAL; -+ } -+ -+ /* Calculate amount of EPs needed */ -+ ep_count = MAX_INTR_INTERVAL / urb_priv->interval; -+ -+ for(i = 0; i < ep_count; i++) { -+ ep_desc = create_ep(urb_priv->epid, urb_priv->first_sb, mem_flags); -+ if(ep_desc == NULL) { -+ /* Free any descriptors that we may have allocated before failure */ -+ while(i > 0) { -+ i--; -+ kfree(urb_priv->intr_ep_pool[i]); -+ } -+ return -ENOMEM; -+ } -+ urb_priv->intr_ep_pool[i] = ep_desc; -+ } -+ urb_priv->intr_ep_pool_length = ep_count; -+ return 0; -+} -+ -+/* DMA RX/TX functions */ -+/* ----------------------- */ -+ -+static void tc_dma_init_rx_list(void) { -+ int i; -+ -+ /* Setup descriptor list except last one */ -+ for (i = 0; i < (NBR_OF_RX_DESC - 1); i++) { -+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -+ RxDescList[i].command = 0; -+ RxDescList[i].next = virt_to_phys(&RxDescList[i + 1]); -+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -+ RxDescList[i].hw_len = 0; -+ RxDescList[i].status = 0; -+ -+ /* DMA IN cache bug. (struct etrax_dma_descr has the same layout as -+ USB_IN_Desc for the relevant fields.) */ -+ prepare_rx_descriptor((struct etrax_dma_descr*)&RxDescList[i]); -+ -+ } -+ /* Special handling of last descriptor */ -+ RxDescList[i].sw_len = RX_DESC_BUF_SIZE; -+ RxDescList[i].command = IO_STATE(USB_IN_command, eol, yes); -+ RxDescList[i].next = virt_to_phys(&RxDescList[0]); -+ RxDescList[i].buf = virt_to_phys(RxBuf + (i * RX_DESC_BUF_SIZE)); -+ RxDescList[i].hw_len = 0; -+ RxDescList[i].status = 0; -+ -+ /* Setup list pointers that show progress in list */ -+ myNextRxDesc = &RxDescList[0]; -+ myLastRxDesc = &RxDescList[NBR_OF_RX_DESC - 1]; -+ -+ flush_etrax_cache(); -+ /* Point DMA to first descriptor in list and start it */ -+ *R_DMA_CH9_FIRST = virt_to_phys(myNextRxDesc); -+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, start); -+} -+ -+ -+static void tc_dma_init_tx_bulk_list(void) { -+ int i; -+ volatile struct USB_EP_Desc *epDescr; -+ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ epDescr = &(TxBulkEPList[i]); -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxBulkEPList[i + 1]); -+ -+ /* Initiate two EPs, disabled and with the eol flag set. No need for any -+ preserved epid. */ -+ -+ /* The first one has the intr flag set so we get an interrupt when the DMA -+ channel is about to become disabled. */ -+ CHECK_ALIGN(&TxBulkDummyEPList[i][0]); -+ TxBulkDummyEPList[i][0].hw_len = 0; -+ TxBulkDummyEPList[i][0].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_STATE(USB_EP_command, intr, yes)); -+ TxBulkDummyEPList[i][0].sub = 0; -+ TxBulkDummyEPList[i][0].next = virt_to_phys(&TxBulkDummyEPList[i][1]); -+ -+ /* The second one. */ -+ CHECK_ALIGN(&TxBulkDummyEPList[i][1]); -+ TxBulkDummyEPList[i][1].hw_len = 0; -+ TxBulkDummyEPList[i][1].command = (IO_FIELD(USB_EP_command, epid, DUMMY_EPID) | -+ IO_STATE(USB_EP_command, eol, yes)); -+ TxBulkDummyEPList[i][1].sub = 0; -+ /* The last dummy's next pointer is the same as the current EP's next pointer. */ -+ TxBulkDummyEPList[i][1].next = virt_to_phys(&TxBulkEPList[i + 1]); -+ } -+ -+ /* Special handling of last descr in list, make list circular */ -+ epDescr = &TxBulkEPList[i]; -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxBulkEPList[0]); -+ -+ /* Init DMA sub-channel pointers to last item in each list */ -+ *R_DMA_CH8_SUB0_EP = virt_to_phys(&TxBulkEPList[i]); -+ /* No point in starting the bulk channel yet. -+ *R_DMA_CH8_SUB0_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -+} -+ -+static void tc_dma_init_tx_ctrl_list(void) { -+ int i; -+ volatile struct USB_EP_Desc *epDescr; -+ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ epDescr = &(TxCtrlEPList[i]); -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxCtrlEPList[i + 1]); -+ } -+ /* Special handling of last descr in list, make list circular */ -+ epDescr = &TxCtrlEPList[i]; -+ CHECK_ALIGN(epDescr); -+ epDescr->hw_len = 0; -+ epDescr->command = IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, i); -+ epDescr->sub = 0; -+ epDescr->next = virt_to_phys(&TxCtrlEPList[0]); -+ -+ /* Init DMA sub-channel pointers to last item in each list */ -+ *R_DMA_CH8_SUB1_EP = virt_to_phys(&TxCtrlEPList[i]); -+ /* No point in starting the ctrl channel yet. -+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB0_CMD, cmd, start); */ -+} -+ -+ -+static void tc_dma_init_tx_intr_list(void) { -+ int i; -+ -+ TxIntrSB_zout.sw_len = 1; -+ TxIntrSB_zout.next = 0; -+ TxIntrSB_zout.buf = virt_to_phys(&zout_buffer[0]); -+ TxIntrSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -+ IO_STATE(USB_SB_command, tt, zout) | -+ IO_STATE(USB_SB_command, full, yes) | -+ IO_STATE(USB_SB_command, eot, yes) | -+ IO_STATE(USB_SB_command, eol, yes)); -+ -+ for (i = 0; i < (MAX_INTR_INTERVAL - 1); i++) { -+ CHECK_ALIGN(&TxIntrEPList[i]); -+ TxIntrEPList[i].hw_len = 0; -+ TxIntrEPList[i].command = -+ (IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, enable, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[i + 1]); -+ } -+ -+ /* Special handling of last descr in list, make list circular */ -+ CHECK_ALIGN(&TxIntrEPList[i]); -+ TxIntrEPList[i].hw_len = 0; -+ TxIntrEPList[i].command = -+ (IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_STATE(USB_EP_command, enable, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIntrEPList[i].sub = virt_to_phys(&TxIntrSB_zout); -+ TxIntrEPList[i].next = virt_to_phys(&TxIntrEPList[0]); -+ -+ intr_dbg("Initiated Intr EP descriptor list\n"); -+ -+ -+ /* Connect DMA 8 sub-channel 2 to first in list */ -+ *R_DMA_CH8_SUB2_EP = virt_to_phys(&TxIntrEPList[0]); -+} -+ -+static void tc_dma_init_tx_isoc_list(void) { -+ int i; -+ -+ DBFENTER; -+ -+ /* Read comment at zout_buffer declaration for an explanation to this. */ -+ TxIsocSB_zout.sw_len = 1; -+ TxIsocSB_zout.next = 0; -+ TxIsocSB_zout.buf = virt_to_phys(&zout_buffer[0]); -+ TxIsocSB_zout.command = (IO_FIELD(USB_SB_command, rem, 0) | -+ IO_STATE(USB_SB_command, tt, zout) | -+ IO_STATE(USB_SB_command, full, yes) | -+ IO_STATE(USB_SB_command, eot, yes) | -+ IO_STATE(USB_SB_command, eol, yes)); -+ -+ /* The last isochronous EP descriptor is a dummy. */ -+ for (i = 0; i < (NBR_OF_EPIDS - 1); i++) { -+ CHECK_ALIGN(&TxIsocEPList[i]); -+ TxIsocEPList[i].hw_len = 0; -+ TxIsocEPList[i].command = IO_FIELD(USB_EP_command, epid, i); -+ TxIsocEPList[i].sub = 0; -+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[i + 1]); -+ } -+ -+ CHECK_ALIGN(&TxIsocEPList[i]); -+ TxIsocEPList[i].hw_len = 0; -+ -+ /* Must enable the last EP descr to get eof interrupt. */ -+ TxIsocEPList[i].command = (IO_STATE(USB_EP_command, enable, yes) | -+ IO_STATE(USB_EP_command, eof, yes) | -+ IO_STATE(USB_EP_command, eol, yes) | -+ IO_FIELD(USB_EP_command, epid, INVALID_EPID)); -+ TxIsocEPList[i].sub = virt_to_phys(&TxIsocSB_zout); -+ TxIsocEPList[i].next = virt_to_phys(&TxIsocEPList[0]); -+ -+ *R_DMA_CH8_SUB3_EP = virt_to_phys(&TxIsocEPList[0]); -+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -+} -+ -+static int tc_dma_init(struct usb_hcd *hcd) { -+ tc_dma_init_rx_list(); -+ tc_dma_init_tx_bulk_list(); -+ tc_dma_init_tx_ctrl_list(); -+ tc_dma_init_tx_intr_list(); -+ tc_dma_init_tx_isoc_list(); -+ -+ if (cris_request_dma(USB_TX_DMA_NBR, -+ "ETRAX 100LX built-in USB (Tx)", -+ DMA_VERBOSE_ON_ERROR, -+ dma_usb)) { -+ err("Could not allocate DMA ch 8 for USB"); -+ return -EBUSY; -+ } -+ -+ if (cris_request_dma(USB_RX_DMA_NBR, -+ "ETRAX 100LX built-in USB (Rx)", -+ DMA_VERBOSE_ON_ERROR, -+ dma_usb)) { -+ err("Could not allocate DMA ch 9 for USB"); -+ return -EBUSY; -+ } -+ -+ *R_IRQ_MASK2_SET = -+ /* Note that these interrupts are not used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub0_descr, set) | -+ /* Sub channel 1 (ctrl) descr. interrupts are used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub1_descr, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub2_descr, set) | -+ /* Sub channel 3 (isoc) descr. interrupts are used. */ -+ IO_STATE(R_IRQ_MASK2_SET, dma8_sub3_descr, set); -+ -+ /* Note that the dma9_descr interrupt is not used. */ -+ *R_IRQ_MASK2_SET = -+ IO_STATE(R_IRQ_MASK2_SET, dma9_eop, set) | -+ IO_STATE(R_IRQ_MASK2_SET, dma9_descr, set); -+ -+ if (request_irq(ETRAX_USB_RX_IRQ, tc_dma_rx_interrupt, 0, -+ "ETRAX 100LX built-in USB (Rx)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_RX_IRQ); -+ return -EBUSY; -+ } -+ -+ if (request_irq(ETRAX_USB_TX_IRQ, tc_dma_tx_interrupt, 0, -+ "ETRAX 100LX built-in USB (Tx)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_TX_IRQ); -+ return -EBUSY; -+ } -+ -+ return 0; -+} -+ -+static void tc_dma_destroy(void) { -+ free_irq(ETRAX_USB_RX_IRQ, NULL); -+ free_irq(ETRAX_USB_TX_IRQ, NULL); -+ -+ cris_free_dma(USB_TX_DMA_NBR, "ETRAX 100LX built-in USB (Tx)"); -+ cris_free_dma(USB_RX_DMA_NBR, "ETRAX 100LX built-in USB (Rx)"); -+ -+} -+ -+static void tc_dma_link_intr_urb(struct urb *urb); -+ -+/* Handle processing of Bulk, Ctrl and Intr queues */ -+static void tc_dma_process_queue(int epid) { -+ struct urb *urb; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ unsigned long flags; -+ char toggle; -+ -+ if(epid_state[epid].disabled) { -+ /* Don't process any URBs on a disabled endpoint */ -+ return; -+ } -+ -+ /* Do not disturb us while fiddling with EPs and epids */ -+ local_irq_save(flags); -+ -+ /* For bulk, Ctrl and Intr can we only have one URB active at a time for -+ a specific EP. */ -+ if(activeUrbList[epid] != NULL) { -+ /* An URB is already active on EP, skip checking queue */ -+ local_irq_restore(flags); -+ return; -+ } -+ -+ urb = urb_list_first(epid); -+ if(urb == NULL) { -+ /* No URB waiting in EP queue. Nothing do to */ -+ local_irq_restore(flags); -+ return; -+ } -+ -+ urb_priv = urb->hcpriv; -+ ASSERT(urb_priv != NULL); -+ ASSERT(urb_priv->urb_state == NOT_STARTED); -+ ASSERT(!usb_pipeisoc(urb->pipe)); -+ -+ /* Remove this URB from the queue and move it to active */ -+ activeUrbList[epid] = urb; -+ urb_list_del(urb, epid); -+ -+ urb_priv->urb_state = STARTED; -+ -+ /* Reset error counters (regardless of which direction this traffic is). */ -+ etrax_epid_clear_error(epid); -+ -+ /* Special handling of Intr EP lists */ -+ if(usb_pipeint(urb->pipe)) { -+ tc_dma_link_intr_urb(urb); -+ local_irq_restore(flags); -+ return; -+ } -+ -+ /* Software must preset the toggle bits for Bulk and Ctrl */ -+ if(usb_pipecontrol(urb->pipe)) { -+ /* Toggle bits are initialized only during setup transaction in a -+ CTRL transfer */ -+ etrax_epid_set_toggle(epid, 0, 0); -+ etrax_epid_set_toggle(epid, 1, 0); -+ } else { -+ toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), -+ usb_pipeout(urb->pipe)); -+ etrax_epid_set_toggle(epid, usb_pipeout(urb->pipe), toggle); -+ } -+ -+ tc_dbg("Added SBs from (URB:0x%x %s %s) to epid %d: %s\n", -+ (unsigned int)urb, str_dir(urb->pipe), str_type(urb->pipe), epid, -+ sblist_to_str(urb_priv->first_sb)); -+ -+ /* We start the DMA sub channel without checking if it's running or not, -+ because: -+ 1) If it's already running, issuing the start command is a nop. -+ 2) We avoid a test-and-set race condition. */ -+ switch(usb_pipetype(urb->pipe)) { -+ case PIPE_BULK: -+ /* Assert that the EP descriptor is disabled. */ -+ ASSERT(!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable))); -+ -+ /* Set up and enable the EP descriptor. */ -+ TxBulkEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ TxBulkEPList[epid].hw_len = 0; -+ TxBulkEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ /* Check if the dummy list is already with us (if several urbs were queued). */ -+ if (usb_pipein(urb->pipe) && (TxBulkEPList[epid].next != virt_to_phys(&TxBulkDummyEPList[epid][0]))) { -+ tc_dbg("Inviting dummy list to the party for urb 0x%lx, epid %d", -+ (unsigned long)urb, epid); -+ -+ /* We don't need to check if the DMA is at this EP or not before changing the -+ next pointer, since we will do it in one 32-bit write (EP descriptors are -+ 32-bit aligned). */ -+ TxBulkEPList[epid].next = virt_to_phys(&TxBulkDummyEPList[epid][0]); -+ } -+ -+ restart_dma8_sub0(); -+ -+ /* Update/restart the bulk start timer since we just started the channel.*/ -+ mod_timer(&bulk_start_timer, jiffies + BULK_START_TIMER_INTERVAL); -+ /* Update/restart the bulk eot timer since we just inserted traffic. */ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ break; -+ case PIPE_CONTROL: -+ /* Assert that the EP descriptor is disabled. */ -+ ASSERT(!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable))); -+ -+ /* Set up and enable the EP descriptor. */ -+ TxCtrlEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ TxCtrlEPList[epid].hw_len = 0; -+ TxCtrlEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ -+ *R_DMA_CH8_SUB1_CMD = IO_STATE(R_DMA_CH8_SUB1_CMD, cmd, start); -+ break; -+ } -+ local_irq_restore(flags); -+} -+ -+static void tc_dma_link_intr_urb(struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ volatile struct USB_EP_Desc *tmp_ep; -+ struct USB_EP_Desc *ep_desc; -+ int i = 0, epid; -+ int pool_idx = 0; -+ -+ ASSERT(urb_priv != NULL); -+ epid = urb_priv->epid; -+ ASSERT(urb_priv->interval > 0); -+ ASSERT(urb_priv->intr_ep_pool_length > 0); -+ -+ tmp_ep = &TxIntrEPList[0]; -+ -+ /* Only insert one EP descriptor in list for Out Intr URBs. -+ We can only handle Out Intr with interval of 128ms because -+ it's not possible to insert several Out Intr EPs because they -+ are not consumed by the DMA. */ -+ if(usb_pipeout(urb->pipe)) { -+ ep_desc = urb_priv->intr_ep_pool[0]; -+ ASSERT(ep_desc); -+ ep_desc->next = tmp_ep->next; -+ tmp_ep->next = virt_to_phys(ep_desc); -+ i++; -+ } else { -+ /* Loop through Intr EP descriptor list and insert EP for URB at -+ specified interval */ -+ do { -+ /* Each EP descriptor with eof flag sat signals a new frame */ -+ if (tmp_ep->command & IO_MASK(USB_EP_command, eof)) { -+ /* Insert a EP from URBs EP pool at correct interval */ -+ if ((i % urb_priv->interval) == 0) { -+ ep_desc = urb_priv->intr_ep_pool[pool_idx]; -+ ASSERT(ep_desc); -+ ep_desc->next = tmp_ep->next; -+ tmp_ep->next = virt_to_phys(ep_desc); -+ pool_idx++; -+ ASSERT(pool_idx <= urb_priv->intr_ep_pool_length); -+ } -+ i++; -+ } -+ tmp_ep = (struct USB_EP_Desc *)phys_to_virt(tmp_ep->next); -+ } while(tmp_ep != &TxIntrEPList[0]); -+ } -+ -+ intr_dbg("Added SBs to intr epid %d: %s interval:%d (%d EP)\n", epid, -+ sblist_to_str(urb_priv->first_sb), urb_priv->interval, pool_idx); -+ -+ /* We start the DMA sub channel without checking if it's running or not, -+ because: -+ 1) If it's already running, issuing the start command is a nop. -+ 2) We avoid a test-and-set race condition. */ -+ *R_DMA_CH8_SUB2_CMD = IO_STATE(R_DMA_CH8_SUB2_CMD, cmd, start); -+} -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+static void tc_dma_process_isoc_urb(struct urb *urb) { -+ unsigned long flags; -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ int epid; -+ -+ /* Do not disturb us while fiddling with EPs and epids */ -+ local_irq_save(flags); -+ -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->first_sb); -+ epid = urb_priv->epid; -+ -+ if(activeUrbList[epid] == NULL) { -+ /* EP is idle, so make this URB active */ -+ activeUrbList[epid] = urb; -+ urb_list_del(urb, epid); -+ ASSERT(TxIsocEPList[epid].sub == 0); -+ ASSERT(!(TxIsocEPList[epid].command & -+ IO_STATE(USB_EP_command, enable, yes))); -+ -+ /* Differentiate between In and Out Isoc. Because In SBs are not consumed*/ -+ if(usb_pipein(urb->pipe)) { -+ /* Each EP for In Isoc will have only one SB descriptor, setup when -+ submitting the first active urb. We do it here by copying from URBs -+ pre-allocated SB. */ -+ memcpy((void *)&(TxIsocSBList[epid]), urb_priv->first_sb, -+ sizeof(TxIsocSBList[epid])); -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(&(TxIsocSBList[epid])); -+ } else { -+ /* For Out Isoc we attach the pre-allocated list of SBs for the URB */ -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ -+ isoc_dbg("Attached first URB:0x%x[%d] to epid:%d first_sb:0x%x" -+ " last_sb::0x%x\n", -+ (unsigned int)urb, urb_priv->urb_num, epid, -+ (unsigned int)(urb_priv->first_sb), -+ (unsigned int)(urb_priv->last_sb)); -+ } -+ -+ if (urb->transfer_flags & URB_ISO_ASAP) { -+ /* The isoc transfer should be started as soon as possible. The -+ start_frame field is a return value if URB_ISO_ASAP was set. Comparing -+ R_USB_FM_NUMBER with a USB Chief trace shows that the first isoc IN -+ token is sent 2 frames later. I'm not sure how this affects usage of -+ the start_frame field by the device driver, or how it affects things -+ when USB_ISO_ASAP is not set, so therefore there's no compensation for -+ the 2 frame "lag" here. */ -+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -+ TxIsocEPList[epid].command |= IO_STATE(USB_EP_command, enable, yes); -+ urb_priv->urb_state = STARTED; -+ isoc_dbg("URB_ISO_ASAP set, urb->start_frame set to %d\n", -+ urb->start_frame); -+ } else { -+ /* Not started yet. */ -+ urb_priv->urb_state = NOT_STARTED; -+ isoc_warn("urb_priv->urb_state set to NOT_STARTED for URB:0x%x\n", -+ (unsigned int)urb); -+ } -+ -+ } else { -+ /* An URB is already active on the EP. Leave URB in queue and let -+ finish_isoc_urb process it after current active URB */ -+ ASSERT(TxIsocEPList[epid].sub != 0); -+ -+ if(usb_pipein(urb->pipe)) { -+ /* Because there already is a active In URB on this epid we do nothing -+ and the finish_isoc_urb() function will handle switching to next URB*/ -+ -+ } else { /* For Out Isoc, insert new URBs traffic last in SB-list. */ -+ struct USB_SB_Desc *temp_sb_desc; -+ -+ /* Set state STARTED to all Out Isoc URBs added to SB list because we -+ don't know how many of them that are finished before descr interrupt*/ -+ urb_priv->urb_state = STARTED; -+ -+ /* Find end of current SB list by looking for SB with eol flag sat */ -+ temp_sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -+ while ((temp_sb_desc->command & IO_MASK(USB_SB_command, eol)) != -+ IO_STATE(USB_SB_command, eol, yes)) { -+ ASSERT(temp_sb_desc->next); -+ temp_sb_desc = phys_to_virt(temp_sb_desc->next); -+ } -+ -+ isoc_dbg("Appended URB:0x%x[%d] (first:0x%x last:0x%x) to epid:%d" -+ " sub:0x%x eol:0x%x\n", -+ (unsigned int)urb, urb_priv->urb_num, -+ (unsigned int)(urb_priv->first_sb), -+ (unsigned int)(urb_priv->last_sb), epid, -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)temp_sb_desc); -+ -+ /* Next pointer must be set before eol is removed. */ -+ temp_sb_desc->next = virt_to_phys(urb_priv->first_sb); -+ /* Clear the previous end of list flag since there is a new in the -+ added SB descriptor list. */ -+ temp_sb_desc->command &= ~IO_MASK(USB_SB_command, eol); -+ -+ if (!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -+ __u32 epid_data; -+ /* 8.8.5 in Designer's Reference says we should check for and correct -+ any errors in the EP here. That should not be necessary if -+ epid_attn is handled correctly, so we assume all is ok. */ -+ epid_data = etrax_epid_iso_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) != -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ isoc_err("Disabled Isoc EP with error:%d on epid:%d when appending" -+ " URB:0x%x[%d]\n", -+ IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data), epid, -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ -+ /* The SB list was exhausted. */ -+ if (virt_to_phys(urb_priv->last_sb) != TxIsocEPList[epid].sub) { -+ /* The new sublist did not get processed before the EP was -+ disabled. Setup the EP again. */ -+ -+ if(virt_to_phys(temp_sb_desc) == TxIsocEPList[epid].sub) { -+ isoc_dbg("EP for epid:%d stoped at SB:0x%x before newly inserted" -+ ", restarting from this URBs SB:0x%x\n", -+ epid, (unsigned int)temp_sb_desc, -+ (unsigned int)(urb_priv->first_sb)); -+ TxIsocEPList[epid].hw_len = 0; -+ TxIsocEPList[epid].sub = virt_to_phys(urb_priv->first_sb); -+ urb->start_frame = (*R_USB_FM_NUMBER & 0x7ff); -+ /* Enable the EP again so data gets processed this time */ -+ TxIsocEPList[epid].command |= -+ IO_STATE(USB_EP_command, enable, yes); -+ -+ } else { -+ /* The EP has been disabled but not at end this URB (god knows -+ where). This should generate an epid_attn so we should not be -+ here */ -+ isoc_warn("EP was disabled on sb:0x%x before SB list for" -+ " URB:0x%x[%d] got processed\n", -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ } else { -+ /* This might happend if we are slow on this function and isn't -+ an error. */ -+ isoc_dbg("EP was disabled and finished with SBs from appended" -+ " URB:0x%x[%d]\n", (unsigned int)urb, urb_priv->urb_num); -+ } -+ } -+ } -+ } -+ -+ /* Start the DMA sub channel */ -+ *R_DMA_CH8_SUB3_CMD = IO_STATE(R_DMA_CH8_SUB3_CMD, cmd, start); -+ -+ local_irq_restore(flags); -+} -+#endif -+ -+static void tc_dma_unlink_intr_urb(struct urb *urb) { -+ struct crisv10_urb_priv *urb_priv = urb->hcpriv; -+ volatile struct USB_EP_Desc *first_ep; /* First EP in the list. */ -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ volatile struct USB_EP_Desc *unlink_ep; /* The one we should remove from -+ the list. */ -+ int count = 0; -+ volatile int timeout = 10000; -+ int epid; -+ -+ /* Read 8.8.4 in Designer's Reference, "Removing an EP Descriptor from the -+ List". */ -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->intr_ep_pool_length > 0); -+ epid = urb_priv->epid; -+ -+ /* First disable all Intr EPs belonging to epid for this URB */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* Disable EP */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ -+ /* Now unlink all EPs belonging to this epid from Descr list */ -+ first_ep = &TxIntrEPList[0]; -+ curr_ep = first_ep; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if (IO_EXTRACT(USB_EP_command, epid, next_ep->command) == epid) { -+ /* This is the one we should unlink. */ -+ unlink_ep = next_ep; -+ -+ /* Actually unlink the EP from the DMA list. */ -+ curr_ep->next = unlink_ep->next; -+ -+ /* Wait until the DMA is no longer at this descriptor. */ -+ while((*R_DMA_CH8_SUB2_EP == virt_to_phys(unlink_ep)) && -+ (timeout-- > 0)); -+ if(timeout == 0) { -+ warn("Timeout while waiting for DMA-TX-Intr to leave unlink EP\n"); -+ } -+ -+ count++; -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != first_ep); -+ -+ if(count != urb_priv->intr_ep_pool_length) { -+ intr_warn("Unlinked %d of %d Intr EPs for URB:0x%x[%d]\n", count, -+ urb_priv->intr_ep_pool_length, (unsigned int)urb, -+ urb_priv->urb_num); -+ } else { -+ intr_dbg("Unlinked %d of %d interrupt EPs for URB:0x%x\n", count, -+ urb_priv->intr_ep_pool_length, (unsigned int)urb); -+ } -+} -+ -+static void check_finished_bulk_tx_epids(struct usb_hcd *hcd, -+ int timer) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ __u32 epid_data; -+ -+ /* Protect TxEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ /* A finished EP descriptor is disabled and has a valid sub pointer */ -+ if (!(TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -+ (TxBulkEPList[epid].sub != 0)) { -+ -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ /* Sanity checks */ -+ ASSERT(urb); -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Only handle finished out Bulk EPs here, -+ and let RX interrupt take care of the rest */ -+ if(!epid_out_traffic(epid)) { -+ continue; -+ } -+ -+ if(timer) { -+ tc_warn("Found finished %s Bulk epid:%d URB:0x%x[%d] from timeout\n", -+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, -+ urb_priv->urb_num); -+ } else { -+ tc_dbg("Found finished %s Bulk epid:%d URB:0x%x[%d] from interrupt\n", -+ epid_out_traffic(epid) ? "Out" : "In", epid, (unsigned int)urb, -+ urb_priv->urb_num); -+ } -+ -+ if(urb_priv->urb_state == UNLINK) { -+ /* This Bulk URB is requested to be unlinked, that means that the EP -+ has been disabled and we might not have sent all data */ -+ tc_finish_urb(hcd, urb, urb->status); -+ continue; -+ } -+ -+ ASSERT(urb_priv->urb_state == STARTED); -+ if (phys_to_virt(TxBulkEPList[epid].sub) != urb_priv->last_sb) { -+ tc_err("Endpoint got disabled before reaching last sb\n"); -+ } -+ -+ epid_data = etrax_epid_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ /* This means that the endpoint has no error, is disabled -+ and had inserted traffic, i.e. transfer successfully completed. */ -+ tc_finish_urb(hcd, urb, 0); -+ } else { -+ /* Shouldn't happen. We expect errors to be caught by epid -+ attention. */ -+ tc_err("Found disabled bulk EP desc (epid:%d error:%d)\n", -+ epid, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); -+ } -+ } else { -+ tc_dbg("Ignoring In Bulk epid:%d, let RX interrupt handle it\n", epid); -+ } -+ } -+ -+ local_irq_restore(flags); -+} -+ -+static void check_finished_ctrl_tx_epids(struct usb_hcd *hcd) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ __u32 epid_data; -+ -+ /* Protect TxEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if(epid == DUMMY_EPID) -+ continue; -+ -+ /* A finished EP descriptor is disabled and has a valid sub pointer */ -+ if (!(TxCtrlEPList[epid].command & IO_MASK(USB_EP_command, enable)) && -+ (TxCtrlEPList[epid].sub != 0)) { -+ -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ -+ if(urb == NULL) { -+ tc_warn("Found finished Ctrl epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ /* Sanity checks */ -+ ASSERT(usb_pipein(urb->pipe)); -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ if (phys_to_virt(TxCtrlEPList[epid].sub) != urb_priv->last_sb) { -+ tc_err("Endpoint got disabled before reaching last sb\n"); -+ } -+ -+ epid_data = etrax_epid_get(epid); -+ if (IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data) == -+ IO_STATE_VALUE(R_USB_EPT_DATA, error_code, no_error)) { -+ /* This means that the endpoint has no error, is disabled -+ and had inserted traffic, i.e. transfer successfully completed. */ -+ -+ /* Check if RX-interrupt for In Ctrl has been processed before -+ finishing the URB */ -+ if(urb_priv->ctrl_rx_done) { -+ tc_dbg("Finishing In Ctrl URB:0x%x[%d] in tx_interrupt\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ tc_finish_urb(hcd, urb, 0); -+ } else { -+ /* If we get zout descriptor interrupt before RX was done for a -+ In Ctrl transfer, then we flag that and it will be finished -+ in the RX-Interrupt */ -+ urb_priv->ctrl_zout_done = 1; -+ tc_dbg("Got zout descr interrupt before RX interrupt\n"); -+ } -+ } else { -+ /* Shouldn't happen. We expect errors to be caught by epid -+ attention. */ -+ tc_err("Found disabled Ctrl EP desc (epid:%d URB:0x%x[%d]) error_code:%d\n", epid, (unsigned int)urb, urb_priv->urb_num, IO_EXTRACT(R_USB_EPT_DATA, error_code, epid_data)); -+ __dump_ep_desc(&(TxCtrlEPList[epid])); -+ __dump_ept_data(epid); -+ } -+ } -+ } -+ local_irq_restore(flags); -+} -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+/* This function goes through all epids that are setup for Out Isoc transfers -+ and marks (isoc_out_done) all queued URBs that the DMA has finished -+ transfer for. -+ No URB completetion is done here to make interrupt routine return quickly. -+ URBs are completed later with help of complete_isoc_bottom_half() that -+ becomes schedules when this functions is finished. */ -+static void check_finished_isoc_tx_epids(void) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ struct USB_SB_Desc* sb_desc; -+ int epid_done; -+ -+ /* Protect TxIsocEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (TxIsocEPList[epid].sub == 0 || epid == INVALID_EPID || -+ !epid_out_traffic(epid)) { -+ /* Nothing here to see. */ -+ continue; -+ } -+ ASSERT(epid_inuse(epid)); -+ ASSERT(epid_isoc(epid)); -+ -+ sb_desc = phys_to_virt(TxIsocEPList[epid].sub); -+ /* Find the last descriptor of the currently active URB for this ep. -+ This is the first descriptor in the sub list marked for a descriptor -+ interrupt. */ -+ while (sb_desc && !IO_EXTRACT(USB_SB_command, intr, sb_desc->command)) { -+ sb_desc = sb_desc->next ? phys_to_virt(sb_desc->next) : 0; -+ } -+ ASSERT(sb_desc); -+ -+ isoc_dbg("Descr IRQ checking epid:%d sub:0x%x intr:0x%x\n", -+ epid, (unsigned int)phys_to_virt(TxIsocEPList[epid].sub), -+ (unsigned int)sb_desc); -+ -+ urb = activeUrbList[epid]; -+ if(urb == NULL) { -+ isoc_err("Isoc Descr irq on epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ epid_done = 0; -+ while(urb && !epid_done) { -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->urb_state == STARTED || -+ urb_priv->urb_state == UNLINK); -+ -+ if (sb_desc != urb_priv->last_sb) { -+ /* This urb has been sent. */ -+ urb_priv->isoc_out_done = 1; -+ -+ } else { /* Found URB that has last_sb as the interrupt reason */ -+ -+ /* Check if EP has been disabled, meaning that all transfers are done*/ -+ if(!(TxIsocEPList[epid].command & IO_MASK(USB_EP_command, enable))) { -+ ASSERT((sb_desc->command & IO_MASK(USB_SB_command, eol)) == -+ IO_STATE(USB_SB_command, eol, yes)); -+ ASSERT(sb_desc->next == 0); -+ urb_priv->isoc_out_done = 1; -+ } else { -+ isoc_dbg("Skipping URB:0x%x[%d] because EP not disabled yet\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ /* Stop looking any further in queue */ -+ epid_done = 1; -+ } -+ -+ if (!epid_done) { -+ if(urb == activeUrbList[epid]) { -+ urb = urb_list_first(epid); -+ } else { -+ urb = urb_list_next(urb, epid); -+ } -+ } -+ } /* END: while(urb && !epid_done) */ -+ } -+ -+ local_irq_restore(flags); -+} -+ -+ -+/* This is where the Out Isoc URBs are realy completed. This function is -+ scheduled from tc_dma_tx_interrupt() when one or more Out Isoc transfers -+ are done. This functions completes all URBs earlier marked with -+ isoc_out_done by fast interrupt routine check_finished_isoc_tx_epids() */ -+ -+static void complete_isoc_bottom_half(void *data) { -+ struct crisv10_isoc_complete_data *comp_data; -+ struct usb_iso_packet_descriptor *packet; -+ struct crisv10_urb_priv * urb_priv; -+ unsigned long flags; -+ struct urb* urb; -+ int epid_done; -+ int epid; -+ int i; -+ -+ comp_data = (struct crisv10_isoc_complete_data*)data; -+ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS - 1; epid++) { -+ if(!epid_inuse(epid) || !epid_isoc(epid) || !epid_out_traffic(epid) || epid == DUMMY_EPID) { -+ /* Only check valid Out Isoc epids */ -+ continue; -+ } -+ -+ isoc_dbg("Isoc bottom-half checking epid:%d, sub:0x%x\n", epid, -+ (unsigned int)phys_to_virt(TxIsocEPList[epid].sub)); -+ -+ /* The descriptor interrupt handler has marked all transmitted Out Isoc -+ URBs with isoc_out_done. Now we traverse all epids and for all that -+ have out Isoc traffic we traverse its URB list and complete the -+ transmitted URBs. */ -+ epid_done = 0; -+ while (!epid_done) { -+ -+ /* Get the active urb (if any) */ -+ urb = activeUrbList[epid]; -+ if (urb == 0) { -+ isoc_dbg("No active URB on epid:%d anymore\n", epid); -+ epid_done = 1; -+ continue; -+ } -+ -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ if (!(urb_priv->isoc_out_done)) { -+ /* We have reached URB that isn't flaged done yet, stop traversing. */ -+ isoc_dbg("Stoped traversing Out Isoc URBs on epid:%d" -+ " before not yet flaged URB:0x%x[%d]\n", -+ epid, (unsigned int)urb, urb_priv->urb_num); -+ epid_done = 1; -+ continue; -+ } -+ -+ /* This urb has been sent. */ -+ isoc_dbg("Found URB:0x%x[%d] that is flaged isoc_out_done\n", -+ (unsigned int)urb, urb_priv->urb_num); -+ -+ /* Set ok on transfered packets for this URB and finish it */ -+ for (i = 0; i < urb->number_of_packets; i++) { -+ packet = &urb->iso_frame_desc[i]; -+ packet->status = 0; -+ packet->actual_length = packet->length; -+ } -+ urb_priv->isoc_packet_counter = urb->number_of_packets; -+ tc_finish_urb(comp_data->hcd, urb, 0); -+ -+ } /* END: while(!epid_done) */ -+ } /* END: for(epid...) */ -+ -+ local_irq_restore(flags); -+ kmem_cache_free(isoc_compl_cache, comp_data); -+} -+#endif -+ -+static void check_finished_intr_tx_epids(struct usb_hcd *hcd) { -+ unsigned long flags; -+ int epid; -+ struct urb *urb; -+ struct crisv10_urb_priv * urb_priv; -+ volatile struct USB_EP_Desc *curr_ep; /* Current EP, the iterator. */ -+ volatile struct USB_EP_Desc *next_ep; /* The EP after current. */ -+ -+ /* Protect TxintrEPList */ -+ local_irq_save(flags); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if(!epid_inuse(epid) || !epid_intr(epid) || !epid_out_traffic(epid)) { -+ /* Nothing to see on this epid. Only check valid Out Intr epids */ -+ continue; -+ } -+ -+ urb = activeUrbList[epid]; -+ if(urb == 0) { -+ intr_warn("Found Out Intr epid:%d with no active URB\n", epid); -+ continue; -+ } -+ -+ /* Sanity check. */ -+ ASSERT(usb_pipetype(urb->pipe) == PIPE_INTERRUPT); -+ ASSERT(usb_pipeout(urb->pipe)); -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ -+ /* Go through EPs between first and second sof-EP. It's here Out Intr EPs -+ are inserted.*/ -+ curr_ep = &TxIntrEPList[0]; -+ do { -+ next_ep = (struct USB_EP_Desc *)phys_to_virt(curr_ep->next); -+ if(next_ep == urb_priv->intr_ep_pool[0]) { -+ /* We found the Out Intr EP for this epid */ -+ -+ /* Disable it so it doesn't get processed again */ -+ next_ep->command &= ~IO_MASK(USB_EP_command, enable); -+ -+ /* Finish the active Out Intr URB with status OK */ -+ tc_finish_urb(hcd, urb, 0); -+ } -+ curr_ep = phys_to_virt(curr_ep->next); -+ } while (curr_ep != &TxIntrEPList[1]); -+ -+ } -+ local_irq_restore(flags); -+} -+ -+/* Interrupt handler for DMA8/IRQ24 with subchannels (called from hardware intr) */ -+static irqreturn_t tc_dma_tx_interrupt(int irq, void *vhc) { -+ struct usb_hcd *hcd = (struct usb_hcd*)vhc; -+ ASSERT(hcd); -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub0_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB0_CLR_INTR = IO_STATE(R_DMA_CH8_SUB0_CLR_INTR, clr_descr, do); -+ restart_dma8_sub0(); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub1_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB1_CLR_INTR = IO_STATE(R_DMA_CH8_SUB1_CLR_INTR, clr_descr, do); -+ check_finished_ctrl_tx_epids(hcd); -+ } -+ -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub2_descr)) { -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB2_CLR_INTR = IO_STATE(R_DMA_CH8_SUB2_CLR_INTR, clr_descr, do); -+ check_finished_intr_tx_epids(hcd); -+ } -+ -+ /* hinko ignore usb_pipeisoc */ -+#if 0 -+ if (*R_IRQ_READ2 & IO_MASK(R_IRQ_READ2, dma8_sub3_descr)) { -+ struct crisv10_isoc_complete_data* comp_data; -+ -+ /* Flag done Out Isoc for later completion */ -+ check_finished_isoc_tx_epids(); -+ -+ /* Clear this interrupt */ -+ *R_DMA_CH8_SUB3_CLR_INTR = IO_STATE(R_DMA_CH8_SUB3_CLR_INTR, clr_descr, do); -+ /* Schedule bottom half of Out Isoc completion function. This function -+ finishes the URBs marked with isoc_out_done */ -+ comp_data = (struct crisv10_isoc_complete_data*) -+ kmem_cache_alloc(isoc_compl_cache, GFP_ATOMIC); -+ ASSERT(comp_data != NULL); -+ comp_data ->hcd = hcd; -+ -+ //INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half, comp_data); -+ INIT_WORK(&comp_data->usb_bh, complete_isoc_bottom_half); -+ schedule_work(&comp_data->usb_bh); -+ } -+#endif -+ -+ return IRQ_HANDLED; -+} -+ -+/* Interrupt handler for DMA9/IRQ25 (called from hardware intr) */ -+static irqreturn_t tc_dma_rx_interrupt(int irq, void *vhc) { -+ unsigned long flags; -+ struct urb *urb; -+ struct usb_hcd *hcd = (struct usb_hcd*)vhc; -+ struct crisv10_urb_priv *urb_priv; -+ int epid = 0; -+ int real_error; -+ -+ ASSERT(hcd); -+ -+ /* Clear this interrupt. */ -+ *R_DMA_CH9_CLR_INTR = IO_STATE(R_DMA_CH9_CLR_INTR, clr_eop, do); -+ -+ /* Custom clear interrupt for this interrupt */ -+ /* The reason we cli here is that we call the driver's callback functions. */ -+ local_irq_save(flags); -+ -+ /* Note that this while loop assumes that all packets span only -+ one rx descriptor. */ -+ while(myNextRxDesc->status & IO_MASK(USB_IN_status, eop)) { -+ epid = IO_EXTRACT(USB_IN_status, epid, myNextRxDesc->status); -+ /* Get the active URB for this epid */ -+ urb = activeUrbList[epid]; -+ -+ ASSERT(epid_inuse(epid)); -+ if (!urb) { -+ dma_err("No urb for epid %d in rx interrupt\n", epid); -+ goto skip_out; -+ } -+ -+ /* Check if any errors on epid */ -+ real_error = 0; -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, error)) { -+ __u32 r_usb_ept_data; -+ -+ if (usb_pipeisoc(urb->pipe)) { -+ r_usb_ept_data = etrax_epid_iso_get(epid); -+ if((r_usb_ept_data & IO_MASK(R_USB_EPT_DATA_ISO, valid)) && -+ (IO_EXTRACT(R_USB_EPT_DATA_ISO, error_code, r_usb_ept_data) == 0) && -+ (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata))) { -+ /* Not an error, just a failure to receive an expected iso -+ in packet in this frame. This is not documented -+ in the designers reference. Continue processing. -+ */ -+ } else real_error = 1; -+ } else real_error = 1; -+ } -+ -+ if(real_error) { -+ dma_err("Error in RX descr on epid:%d for URB 0x%x", -+ epid, (unsigned int)urb); -+ dump_ept_data(epid); -+ dump_in_desc(myNextRxDesc); -+ goto skip_out; -+ } -+ -+ urb_priv = (struct crisv10_urb_priv *)urb->hcpriv; -+ ASSERT(urb_priv); -+ ASSERT(urb_priv->urb_state == STARTED || -+ urb_priv->urb_state == UNLINK); -+ -+ if ((usb_pipetype(urb->pipe) == PIPE_BULK) || -+ (usb_pipetype(urb->pipe) == PIPE_CONTROL) || -+ (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) { -+ -+ /* We get nodata for empty data transactions, and the rx descriptor's -+ hw_len field is not valid in that case. No data to copy in other -+ words. */ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -+ /* No data to copy */ -+ } else { -+ /* -+ dma_dbg("Processing RX for URB:0x%x epid:%d (data:%d ofs:%d)\n", -+ (unsigned int)urb, epid, myNextRxDesc->hw_len, -+ urb_priv->rx_offset); -+ */ -+ /* Only copy data if URB isn't flaged to be unlinked*/ -+ if(urb_priv->urb_state != UNLINK) { -+ /* Make sure the data fits in the buffer. */ -+ if(urb_priv->rx_offset + myNextRxDesc->hw_len -+ <= urb->transfer_buffer_length) { -+ -+ /* Copy the data to URBs buffer */ -+ memcpy(urb->transfer_buffer + urb_priv->rx_offset, -+ phys_to_virt(myNextRxDesc->buf), myNextRxDesc->hw_len); -+ urb_priv->rx_offset += myNextRxDesc->hw_len; -+ } else { -+ /* Signal overflow when returning URB */ -+ urb->status = -EOVERFLOW; -+ tc_finish_urb_later(hcd, urb, urb->status); -+ } -+ } -+ } -+ -+ /* Check if it was the last packet in the transfer */ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, eot)) { -+ /* Special handling for In Ctrl URBs. */ -+ if(usb_pipecontrol(urb->pipe) && usb_pipein(urb->pipe) && -+ !(urb_priv->ctrl_zout_done)) { -+ /* Flag that RX part of Ctrl transfer is done. Because zout descr -+ interrupt hasn't happend yet will the URB be finished in the -+ TX-Interrupt. */ -+ urb_priv->ctrl_rx_done = 1; -+ tc_dbg("Not finishing In Ctrl URB:0x%x from rx_interrupt, waiting" -+ " for zout\n", (unsigned int)urb); -+ } else { -+ tc_finish_urb(hcd, urb, 0); -+ } -+ } -+ } else { /* ISOC RX */ -+ /* -+ isoc_dbg("Processing RX for epid:%d (URB:0x%x) ISOC pipe\n", -+ epid, (unsigned int)urb); -+ */ -+ -+ struct usb_iso_packet_descriptor *packet; -+ -+ if (urb_priv->urb_state == UNLINK) { -+ isoc_warn("Ignoring Isoc Rx data for urb being unlinked.\n"); -+ goto skip_out; -+ } else if (urb_priv->urb_state == NOT_STARTED) { -+ isoc_err("What? Got Rx data for Isoc urb that isn't started?\n"); -+ goto skip_out; -+ } -+ -+ packet = &urb->iso_frame_desc[urb_priv->isoc_packet_counter]; -+ ASSERT(packet); -+ packet->status = 0; -+ -+ if (myNextRxDesc->status & IO_MASK(USB_IN_status, nodata)) { -+ /* We get nodata for empty data transactions, and the rx descriptor's -+ hw_len field is not valid in that case. We copy 0 bytes however to -+ stay in synch. */ -+ packet->actual_length = 0; -+ } else { -+ packet->actual_length = myNextRxDesc->hw_len; -+ /* Make sure the data fits in the buffer. */ -+ ASSERT(packet->actual_length <= packet->length); -+ memcpy(urb->transfer_buffer + packet->offset, -+ phys_to_virt(myNextRxDesc->buf), packet->actual_length); -+ if(packet->actual_length > 0) -+ isoc_dbg("Copied %d bytes, packet %d for URB:0x%x[%d]\n", -+ packet->actual_length, urb_priv->isoc_packet_counter, -+ (unsigned int)urb, urb_priv->urb_num); -+ } -+ -+ /* Increment the packet counter. */ -+ urb_priv->isoc_packet_counter++; -+ -+ /* Note that we don't care about the eot field in the rx descriptor's -+ status. It will always be set for isoc traffic. */ -+ if (urb->number_of_packets == urb_priv->isoc_packet_counter) { -+ /* Complete the urb with status OK. */ -+ tc_finish_urb(hcd, urb, 0); -+ } -+ } -+ -+ skip_out: -+ myNextRxDesc->status = 0; -+ myNextRxDesc->command |= IO_MASK(USB_IN_command, eol); -+ myLastRxDesc->command &= ~IO_MASK(USB_IN_command, eol); -+ myLastRxDesc = myNextRxDesc; -+ myNextRxDesc = phys_to_virt(myNextRxDesc->next); -+ flush_etrax_cache(); -+ *R_DMA_CH9_CMD = IO_STATE(R_DMA_CH9_CMD, cmd, restart); -+ } -+ -+ local_irq_restore(flags); -+ -+ return IRQ_HANDLED; -+} -+ -+static void tc_bulk_start_timer_func(unsigned long dummy) { -+ /* We might enable an EP descriptor behind the current DMA position when -+ it's about to decide that there are no more bulk traffic and it should -+ stop the bulk channel. -+ Therefore we periodically check if the bulk channel is stopped and there -+ is an enabled bulk EP descriptor, in which case we start the bulk -+ channel. */ -+ -+ if (!(*R_DMA_CH8_SUB0_CMD & IO_MASK(R_DMA_CH8_SUB0_CMD, cmd))) { -+ int epid; -+ -+ timer_dbg("bulk_start_timer: Bulk DMA channel not running.\n"); -+ -+ for (epid = 0; epid < NBR_OF_EPIDS; epid++) { -+ if (TxBulkEPList[epid].command & IO_MASK(USB_EP_command, enable)) { -+ timer_warn("Found enabled EP for epid %d, starting bulk channel.\n", -+ epid); -+ restart_dma8_sub0(); -+ -+ /* Restart the bulk eot timer since we just started the bulk channel.*/ -+ mod_timer(&bulk_eot_timer, jiffies + BULK_EOT_TIMER_INTERVAL); -+ -+ /* No need to search any further. */ -+ break; -+ } -+ } -+ } else { -+ timer_dbg("bulk_start_timer: Bulk DMA channel running.\n"); -+ } -+} -+ -+static void tc_bulk_eot_timer_func(unsigned long dummy) { -+ struct usb_hcd *hcd = (struct usb_hcd*)dummy; -+ ASSERT(hcd); -+ /* Because of a race condition in the top half, we might miss a bulk eot. -+ This timer "simulates" a bulk eot if we don't get one for a while, -+ hopefully correcting the situation. */ -+ timer_dbg("bulk_eot_timer timed out.\n"); -+ check_finished_bulk_tx_epids(hcd, 1); -+} -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Device driver block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* Forward declarations for device driver functions */ -+static int devdrv_hcd_probe(struct device *); -+static int devdrv_hcd_remove(struct device *); -+#ifdef CONFIG_PM -+static int devdrv_hcd_suspend(struct device *, u32, u32); -+static int devdrv_hcd_resume(struct device *, u32); -+#endif /* CONFIG_PM */ -+ -+/* the device */ -+static struct platform_device *devdrv_hc_platform_device; -+ -+/* device driver interface */ -+static struct device_driver devdrv_hc_device_driver = { -+ .name = (char *) hc_name, -+ .bus = &platform_bus_type, -+ -+ .probe = devdrv_hcd_probe, -+ .remove = devdrv_hcd_remove, -+ -+#ifdef CONFIG_PM -+ .suspend = devdrv_hcd_suspend, -+ .resume = devdrv_hcd_resume, -+#endif /* CONFIG_PM */ -+}; -+ -+/* initialize the host controller and driver */ -+static int __init_or_module devdrv_hcd_probe(struct device *dev) -+{ -+ struct usb_hcd *hcd; -+ struct crisv10_hcd *crisv10_hcd; -+ int retval; -+ -+ /* Check DMA burst length */ -+ if(IO_EXTRACT(R_BUS_CONFIG, dma_burst, *R_BUS_CONFIG) != -+ IO_STATE(R_BUS_CONFIG, dma_burst, burst32)) { -+ devdrv_err("Invalid DMA burst length in Etrax 100LX," -+ " needs to be 32\n"); -+ return -EPERM; -+ } -+ -+ hcd = usb_create_hcd(&crisv10_hc_driver, dev, dev->bus_id); -+ if (!hcd) -+ return -ENOMEM; -+ -+ crisv10_hcd = hcd_to_crisv10_hcd(hcd); -+ spin_lock_init(&crisv10_hcd->lock); -+ crisv10_hcd->num_ports = num_ports(); -+ crisv10_hcd->running = 0; -+ -+ dev_set_drvdata(dev, crisv10_hcd); -+ -+ devdrv_dbg("ETRAX USB IRQs HC:%d RX:%d TX:%d\n", ETRAX_USB_HC_IRQ, -+ ETRAX_USB_RX_IRQ, ETRAX_USB_TX_IRQ); -+ -+ /* Print out chip version read from registers */ -+ int rev_maj = *R_USB_REVISION & IO_MASK(R_USB_REVISION, major); -+ int rev_min = *R_USB_REVISION & IO_MASK(R_USB_REVISION, minor); -+ if(rev_min == 0) { -+ devdrv_info("Etrax 100LX USB Revision %d v1,2\n", rev_maj); -+ } else { -+ devdrv_info("Etrax 100LX USB Revision %d v%d\n", rev_maj, rev_min); -+ } -+ -+ devdrv_info("Bulk timer interval, start:%d eot:%d\n", -+ BULK_START_TIMER_INTERVAL, -+ BULK_EOT_TIMER_INTERVAL); -+ -+ -+ /* Init root hub data structures */ -+ if(rh_init()) { -+ devdrv_err("Failed init data for Root Hub\n"); -+ retval = -ENOMEM; -+ } -+ -+ if(port_in_use(0)) { -+ if (cris_request_io_interface(if_usb_1, "ETRAX100LX USB-HCD")) { -+ printk(KERN_CRIT "usb-host: request IO interface usb1 failed"); -+ retval = -EBUSY; -+ goto out; -+ } -+ devdrv_info("Claimed interface for USB physical port 1\n"); -+ } -+ if(port_in_use(1)) { -+ if (cris_request_io_interface(if_usb_2, "ETRAX100LX USB-HCD")) { -+ /* Free first interface if second failed to be claimed */ -+ if(port_in_use(0)) { -+ cris_free_io_interface(if_usb_1); -+ } -+ printk(KERN_CRIT "usb-host: request IO interface usb2 failed"); -+ retval = -EBUSY; -+ goto out; -+ } -+ devdrv_info("Claimed interface for USB physical port 2\n"); -+ } -+ -+ /* Init transfer controller structs and locks */ -+ if((retval = tc_init(hcd)) != 0) { -+ goto out; -+ } -+ -+ /* Attach interrupt functions for DMA and init DMA controller */ -+ if((retval = tc_dma_init(hcd)) != 0) { -+ goto out; -+ } -+ -+ /* Attach the top IRQ handler for USB controller interrupts */ -+ if (request_irq(ETRAX_USB_HC_IRQ, crisv10_hcd_top_irq, 0, -+ "ETRAX 100LX built-in USB (HC)", hcd)) { -+ err("Could not allocate IRQ %d for USB", ETRAX_USB_HC_IRQ); -+ retval = -EBUSY; -+ goto out; -+ } -+ -+ /* iso_eof is only enabled when isoc traffic is running. */ -+ *R_USB_IRQ_MASK_SET = -+ /* IO_STATE(R_USB_IRQ_MASK_SET, iso_eof, set) | */ -+ IO_STATE(R_USB_IRQ_MASK_SET, bulk_eot, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, epid_attn, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, port_status, set) | -+ IO_STATE(R_USB_IRQ_MASK_SET, ctl_status, set); -+ -+ -+ crisv10_ready_wait(); -+ /* Reset the USB interface. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, reset); -+ -+ /* Designer's Reference, p. 8 - 10 says we should Initate R_USB_FM_PSTART to -+ 0x2A30 (10800), to guarantee that control traffic gets 10% of the -+ bandwidth, and periodic transfer may allocate the rest (90%). -+ This doesn't work though. -+ The value 11960 is chosen to be just after the SOF token, with a couple -+ of bit times extra for possible bit stuffing. */ -+ *R_USB_FM_PSTART = IO_FIELD(R_USB_FM_PSTART, value, 11960); -+ -+ crisv10_ready_wait(); -+ /* Configure the USB interface as a host controller. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_config); -+ -+ -+ /* Check so controller not busy before enabling ports */ -+ crisv10_ready_wait(); -+ -+ /* Enable selected USB ports */ -+ if(port_in_use(0)) { -+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, no); -+ } else { -+ *R_USB_PORT1_DISABLE = IO_STATE(R_USB_PORT1_DISABLE, disable, yes); -+ } -+ if(port_in_use(1)) { -+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, no); -+ } else { -+ *R_USB_PORT2_DISABLE = IO_STATE(R_USB_PORT2_DISABLE, disable, yes); -+ } -+ -+ crisv10_ready_wait(); -+ /* Start processing of USB traffic. */ -+ *R_USB_COMMAND = -+ IO_STATE(R_USB_COMMAND, port_sel, nop) | -+ IO_STATE(R_USB_COMMAND, port_cmd, reset) | -+ IO_STATE(R_USB_COMMAND, ctrl_cmd, host_run); -+ -+ /* Do not continue probing initialization before USB interface is done */ -+ crisv10_ready_wait(); -+ -+ /* Register our Host Controller to USB Core -+ * Finish the remaining parts of generic HCD initialization: allocate the -+ * buffers of consistent memory, register the bus -+ * and call the driver's reset() and start() routines. */ -+ retval = usb_add_hcd(hcd, ETRAX_USB_HC_IRQ, IRQF_DISABLED); -+ if (retval != 0) { -+ devdrv_err("Failed registering HCD driver\n"); -+ goto out; -+ } -+ -+ return 0; -+ -+ out: -+ devdrv_hcd_remove(dev); -+ return retval; -+} -+ -+ -+/* cleanup after the host controller and driver */ -+static int __init_or_module devdrv_hcd_remove(struct device *dev) -+{ -+ struct crisv10_hcd *crisv10_hcd = dev_get_drvdata(dev); -+ struct usb_hcd *hcd; -+ -+ if (!crisv10_hcd) -+ return 0; -+ hcd = crisv10_hcd_to_hcd(crisv10_hcd); -+ -+ -+ /* Stop USB Controller in Etrax 100LX */ -+ crisv10_hcd_reset(hcd); -+ -+ usb_remove_hcd(hcd); -+ devdrv_dbg("Removed HCD from USB Core\n"); -+ -+ /* Free USB Controller IRQ */ -+ free_irq(ETRAX_USB_HC_IRQ, NULL); -+ -+ /* Free resources */ -+ tc_dma_destroy(); -+ tc_destroy(); -+ -+ -+ if(port_in_use(0)) { -+ cris_free_io_interface(if_usb_1); -+ } -+ if(port_in_use(1)) { -+ cris_free_io_interface(if_usb_2); -+ } -+ -+ devdrv_dbg("Freed all claimed resources\n"); -+ -+ return 0; -+} -+ -+ -+#ifdef CONFIG_PM -+ -+static int devdrv_hcd_suspend(struct usb_hcd *hcd, u32 state, u32 level) -+{ -+ return 0; /* no-op for now */ -+} -+ -+static int devdrv_hcd_resume(struct usb_hcd *hcd, u32 level) -+{ -+ return 0; /* no-op for now */ -+} -+ -+#endif /* CONFIG_PM */ -+ -+ -+ -+/*************************************************************/ -+/*************************************************************/ -+/* Module block */ -+/*************************************************************/ -+/*************************************************************/ -+ -+/* register driver */ -+static int __init module_hcd_init(void) -+{ -+ -+ if (usb_disabled()) -+ return -ENODEV; -+ -+ /* Here we select enabled ports by following defines created from -+ menuconfig */ -+#ifndef CONFIG_ETRAX_USB_HOST_PORT1 -+ ports &= ~(1<<0); -+#endif -+#ifndef CONFIG_ETRAX_USB_HOST_PORT2 -+ ports &= ~(1<<1); -+#endif -+ -+ printk(KERN_INFO "%s version "VERSION" "COPYRIGHT"\n", product_desc); -+ -+ devdrv_hc_platform_device = -+ platform_device_register_simple((char *) hc_name, 0, NULL, 0); -+ -+ if (IS_ERR(devdrv_hc_platform_device)) -+ return PTR_ERR(devdrv_hc_platform_device); -+ return driver_register(&devdrv_hc_device_driver); -+ /* -+ * Note that we do not set the DMA mask for the device, -+ * i.e. we pretend that we will use PIO, since no specific -+ * allocation routines are needed for DMA buffers. This will -+ * cause the HCD buffer allocation routines to fall back to -+ * kmalloc(). -+ */ -+} -+ -+/* unregister driver */ -+static void __exit module_hcd_exit(void) -+{ -+ driver_unregister(&devdrv_hc_device_driver); -+} -+ -+ -+/* Module hooks */ -+module_init(module_hcd_init); -+module_exit(module_hcd_exit); ---- /dev/null -+++ b/drivers/usb/host/hc-crisv10.h -@@ -0,0 +1,331 @@ -+#ifndef __LINUX_ETRAX_USB_H -+#define __LINUX_ETRAX_USB_H -+ -+#include -+#include -+ -+struct USB_IN_Desc { -+ volatile __u16 sw_len; -+ volatile __u16 command; -+ volatile unsigned long next; -+ volatile unsigned long buf; -+ volatile __u16 hw_len; -+ volatile __u16 status; -+}; -+ -+struct USB_SB_Desc { -+ volatile __u16 sw_len; -+ volatile __u16 command; -+ volatile unsigned long next; -+ volatile unsigned long buf; -+}; -+ -+struct USB_EP_Desc { -+ volatile __u16 hw_len; -+ volatile __u16 command; -+ volatile unsigned long sub; -+ volatile unsigned long next; -+}; -+ -+ -+/* Root Hub port status struct */ -+struct crisv10_rh { -+ volatile __u16 wPortChange[2]; -+ volatile __u16 wPortStatusPrev[2]; -+}; -+ -+/* HCD description */ -+struct crisv10_hcd { -+ spinlock_t lock; -+ __u8 num_ports; -+ __u8 running; -+}; -+ -+ -+/* Endpoint HC private data description */ -+struct crisv10_ep_priv { -+ int epid; -+}; -+ -+/* Additional software state info for a USB Controller epid */ -+struct etrax_epid { -+ __u8 inuse; /* !0 = setup in Etrax and used for a endpoint */ -+ __u8 disabled; /* !0 = Temporarly disabled to avoid resubmission */ -+ __u8 type; /* Setup as: PIPE_BULK, PIPE_CONTROL ... */ -+ __u8 out_traffic; /* !0 = This epid is for out traffic */ -+}; -+ -+/* Struct to hold information of scheduled later URB completion */ -+struct urb_later_data { -+// struct work_struct ws; -+ struct delayed_work ws; -+ struct usb_hcd *hcd; -+ struct urb *urb; -+ int urb_num; -+ int status; -+}; -+ -+ -+typedef enum { -+ STARTED, -+ NOT_STARTED, -+ UNLINK, -+} crisv10_urb_state_t; -+ -+ -+struct crisv10_urb_priv { -+ /* Sequence number for this URB. Every new submited URB gets this from -+ a incrementing counter. Used when a URB is scheduled for later finish to -+ be sure that the intended URB hasn't already been completed (device -+ drivers has a tendency to reuse URBs once they are completed, causing us -+ to not be able to single old ones out only based on the URB pointer.) */ -+ __u32 urb_num; -+ -+ /* The first_sb field is used for freeing all SB descriptors belonging -+ to an urb. The corresponding ep descriptor's sub pointer cannot be -+ used for this since the DMA advances the sub pointer as it processes -+ the sb list. */ -+ struct USB_SB_Desc *first_sb; -+ -+ /* The last_sb field referes to the last SB descriptor that belongs to -+ this urb. This is important to know so we can free the SB descriptors -+ that ranges between first_sb and last_sb. */ -+ struct USB_SB_Desc *last_sb; -+ -+ /* The rx_offset field is used in ctrl and bulk traffic to keep track -+ of the offset in the urb's transfer_buffer where incoming data should be -+ copied to. */ -+ __u32 rx_offset; -+ -+ /* Counter used in isochronous transfers to keep track of the -+ number of packets received/transmitted. */ -+ __u32 isoc_packet_counter; -+ -+ /* Flag that marks if this Isoc Out URB has finished it's transfer. Used -+ because several URBs can be finished before list is processed */ -+ __u8 isoc_out_done; -+ -+ /* This field is used to pass information about the urb's current state -+ between the various interrupt handlers (thus marked volatile). */ -+ volatile crisv10_urb_state_t urb_state; -+ -+ /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT. -+ When DMA8 sub-channel 2 has processed the SB list for this sequence we -+ get a interrupt. We also get a interrupt for In transfers and which -+ one of these interrupts that comes first depends of data size and device. -+ To be sure that we have got both interrupts before we complete the URB -+ we have these to flags that shows which part that has completed. -+ We can then check when we get one of the interrupts that if the other has -+ occured it's safe for us to complete the URB, otherwise we set appropriate -+ flag and do the completion when we get the other interrupt. */ -+ volatile unsigned char ctrl_zout_done; -+ volatile unsigned char ctrl_rx_done; -+ -+ /* Connection between the submitted urb and ETRAX epid number */ -+ __u8 epid; -+ -+ /* The rx_data_list field is used for periodic traffic, to hold -+ received data for later processing in the the complete_urb functions, -+ where the data us copied to the urb's transfer_buffer. Basically, we -+ use this intermediate storage because we don't know when it's safe to -+ reuse the transfer_buffer (FIXME?). */ -+ struct list_head rx_data_list; -+ -+ -+ /* The interval time rounded up to closest 2^N */ -+ int interval; -+ -+ /* Pool of EP descriptors needed if it's a INTR transfer. -+ Amount of EPs in pool correspons to how many INTR that should -+ be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */ -+ struct USB_EP_Desc* intr_ep_pool[128]; -+ -+ /* The mount of EPs allocated for this INTR URB */ -+ int intr_ep_pool_length; -+ -+ /* Pointer to info struct if URB is scheduled to be finished later */ -+ struct urb_later_data* later_data; -+}; -+ -+ -+/* This struct is for passing data from the top half to the bottom half irq -+ handlers */ -+struct crisv10_irq_reg { -+ struct usb_hcd* hcd; -+ __u32 r_usb_epid_attn; -+ __u8 r_usb_status; -+ __u16 r_usb_rh_port_status_1; -+ __u16 r_usb_rh_port_status_2; -+ __u32 r_usb_irq_mask_read; -+ __u32 r_usb_fm_number; -+ struct work_struct usb_bh; -+}; -+ -+ -+/* This struct is for passing data from the isoc top half to the isoc bottom -+ half. */ -+struct crisv10_isoc_complete_data { -+ struct usb_hcd *hcd; -+ struct urb *urb; -+ struct work_struct usb_bh; -+}; -+ -+/* Entry item for URB lists for each endpint */ -+typedef struct urb_entry -+{ -+ struct urb *urb; -+ struct list_head list; -+} urb_entry_t; -+ -+/* --------------------------------------------------------------------------- -+ Virtual Root HUB -+ ------------------------------------------------------------------------- */ -+/* destination of request */ -+#define RH_INTERFACE 0x01 -+#define RH_ENDPOINT 0x02 -+#define RH_OTHER 0x03 -+ -+#define RH_CLASS 0x20 -+#define RH_VENDOR 0x40 -+ -+/* Requests: bRequest << 8 | bmRequestType */ -+#define RH_GET_STATUS 0x0080 -+#define RH_CLEAR_FEATURE 0x0100 -+#define RH_SET_FEATURE 0x0300 -+#define RH_SET_ADDRESS 0x0500 -+#define RH_GET_DESCRIPTOR 0x0680 -+#define RH_SET_DESCRIPTOR 0x0700 -+#define RH_GET_CONFIGURATION 0x0880 -+#define RH_SET_CONFIGURATION 0x0900 -+#define RH_GET_STATE 0x0280 -+#define RH_GET_INTERFACE 0x0A80 -+#define RH_SET_INTERFACE 0x0B00 -+#define RH_SYNC_FRAME 0x0C80 -+/* Our Vendor Specific Request */ -+#define RH_SET_EP 0x2000 -+ -+ -+/* Hub port features */ -+#define RH_PORT_CONNECTION 0x00 -+#define RH_PORT_ENABLE 0x01 -+#define RH_PORT_SUSPEND 0x02 -+#define RH_PORT_OVER_CURRENT 0x03 -+#define RH_PORT_RESET 0x04 -+#define RH_PORT_POWER 0x08 -+#define RH_PORT_LOW_SPEED 0x09 -+#define RH_C_PORT_CONNECTION 0x10 -+#define RH_C_PORT_ENABLE 0x11 -+#define RH_C_PORT_SUSPEND 0x12 -+#define RH_C_PORT_OVER_CURRENT 0x13 -+#define RH_C_PORT_RESET 0x14 -+ -+/* Hub features */ -+#define RH_C_HUB_LOCAL_POWER 0x00 -+#define RH_C_HUB_OVER_CURRENT 0x01 -+ -+#define RH_DEVICE_REMOTE_WAKEUP 0x00 -+#define RH_ENDPOINT_STALL 0x01 -+ -+/* Our Vendor Specific feature */ -+#define RH_REMOVE_EP 0x00 -+ -+ -+#define RH_ACK 0x01 -+#define RH_REQ_ERR -1 -+#define RH_NACK 0x00 -+ -+/* Field definitions for */ -+ -+#define USB_IN_command__eol__BITNR 0 /* command macros */ -+#define USB_IN_command__eol__WIDTH 1 -+#define USB_IN_command__eol__no 0 -+#define USB_IN_command__eol__yes 1 -+ -+#define USB_IN_command__intr__BITNR 3 -+#define USB_IN_command__intr__WIDTH 1 -+#define USB_IN_command__intr__no 0 -+#define USB_IN_command__intr__yes 1 -+ -+#define USB_IN_status__eop__BITNR 1 /* status macros. */ -+#define USB_IN_status__eop__WIDTH 1 -+#define USB_IN_status__eop__no 0 -+#define USB_IN_status__eop__yes 1 -+ -+#define USB_IN_status__eot__BITNR 5 -+#define USB_IN_status__eot__WIDTH 1 -+#define USB_IN_status__eot__no 0 -+#define USB_IN_status__eot__yes 1 -+ -+#define USB_IN_status__error__BITNR 6 -+#define USB_IN_status__error__WIDTH 1 -+#define USB_IN_status__error__no 0 -+#define USB_IN_status__error__yes 1 -+ -+#define USB_IN_status__nodata__BITNR 7 -+#define USB_IN_status__nodata__WIDTH 1 -+#define USB_IN_status__nodata__no 0 -+#define USB_IN_status__nodata__yes 1 -+ -+#define USB_IN_status__epid__BITNR 8 -+#define USB_IN_status__epid__WIDTH 5 -+ -+#define USB_EP_command__eol__BITNR 0 -+#define USB_EP_command__eol__WIDTH 1 -+#define USB_EP_command__eol__no 0 -+#define USB_EP_command__eol__yes 1 -+ -+#define USB_EP_command__eof__BITNR 1 -+#define USB_EP_command__eof__WIDTH 1 -+#define USB_EP_command__eof__no 0 -+#define USB_EP_command__eof__yes 1 -+ -+#define USB_EP_command__intr__BITNR 3 -+#define USB_EP_command__intr__WIDTH 1 -+#define USB_EP_command__intr__no 0 -+#define USB_EP_command__intr__yes 1 -+ -+#define USB_EP_command__enable__BITNR 4 -+#define USB_EP_command__enable__WIDTH 1 -+#define USB_EP_command__enable__no 0 -+#define USB_EP_command__enable__yes 1 -+ -+#define USB_EP_command__hw_valid__BITNR 5 -+#define USB_EP_command__hw_valid__WIDTH 1 -+#define USB_EP_command__hw_valid__no 0 -+#define USB_EP_command__hw_valid__yes 1 -+ -+#define USB_EP_command__epid__BITNR 8 -+#define USB_EP_command__epid__WIDTH 5 -+ -+#define USB_SB_command__eol__BITNR 0 /* command macros. */ -+#define USB_SB_command__eol__WIDTH 1 -+#define USB_SB_command__eol__no 0 -+#define USB_SB_command__eol__yes 1 -+ -+#define USB_SB_command__eot__BITNR 1 -+#define USB_SB_command__eot__WIDTH 1 -+#define USB_SB_command__eot__no 0 -+#define USB_SB_command__eot__yes 1 -+ -+#define USB_SB_command__intr__BITNR 3 -+#define USB_SB_command__intr__WIDTH 1 -+#define USB_SB_command__intr__no 0 -+#define USB_SB_command__intr__yes 1 -+ -+#define USB_SB_command__tt__BITNR 4 -+#define USB_SB_command__tt__WIDTH 2 -+#define USB_SB_command__tt__zout 0 -+#define USB_SB_command__tt__in 1 -+#define USB_SB_command__tt__out 2 -+#define USB_SB_command__tt__setup 3 -+ -+ -+#define USB_SB_command__rem__BITNR 8 -+#define USB_SB_command__rem__WIDTH 6 -+ -+#define USB_SB_command__full__BITNR 6 -+#define USB_SB_command__full__WIDTH 1 -+#define USB_SB_command__full__no 0 -+#define USB_SB_command__full__yes 1 -+ -+#endif -- 2.30.2