From cb99a50b8b80bf5142e4fd10b9b7915c278f537b Mon Sep 17 00:00:00 2001
From: Florian Fainelli <florian@openwrt.org>
Date: Sat, 13 Jun 2009 15:56:21 +0000
Subject: [PATCH] [package] recognize WAP54Gv2 and assigne LED and GPIOs
 (#5335)

SVN-Revision: 16434
---
 package/broadcom-diag/src/diag.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index c8c0e34abe..4667591a16 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -54,6 +54,7 @@ module_param(gpiomask, int, 0644);
 enum {
 	/* Linksys */
 	WAP54GV1,
+	WAP54GV2,
 	WAP54GV3,
 	WRT54GV1,
 	WRT54G,
@@ -166,6 +167,16 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "wlan",	.gpio = 1 << 4 },
 		},
 	},
+	[WAP54GV2] = {
+		.name		= "Linksys WAP54G V2",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 0 },
+		},
+		.leds		= {
+			{ .name = "wlan",	.gpio = 1 << 5, .polarity = REVERSE },
+			/* GPIO 6 is b44 (eth0, LAN) PHY power */
+		},
+	},
 	[WAP54GV3] = {
 		.name		= "Linksys WAP54G V3",
 		.buttons	= {
@@ -839,6 +850,8 @@ static struct platform_t __init *platform_detect(void)
 			/* default to WRT54G */
 			return &platforms[WRT54G];
 		}
+		if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+			return &platforms[WAP54GV2];
 
 		if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
 			if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))
-- 
2.30.2