From eda39259fbd8839c04b2c64e909e086f0cbd349d Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Sat, 31 Jan 2009 18:36:07 +0000
Subject: [PATCH] [package] mac80211/ath9k: disable leds on the ar9100 devices

SVN-Revision: 14330
---
 ...1-ath9k-dont-register-leds-on-ar9100.patch | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch

diff --git a/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
new file mode 100644
index 0000000000..85518a2038
--- /dev/null
+++ b/package/mac80211/patches/401-ath9k-dont-register-leds-on-ar9100.patch
@@ -0,0 +1,38 @@
+--- a/drivers/net/wireless/ath9k/main.c
++++ b/drivers/net/wireless/ath9k/main.c
+@@ -989,6 +989,11 @@ static void ath_unregister_led(struct at
+ 
+ static void ath_deinit_leds(struct ath_softc *sc)
+ {
++#if 0
++	if (AR_SREV_9100(sc->sc_ah))
++		return;
++#endif
++
+ 	ath_unregister_led(&sc->assoc_led);
+ 	sc->sc_flags &= ~SC_OP_LED_ASSOCIATED;
+ 	ath_unregister_led(&sc->tx_led);
+@@ -1002,6 +1007,11 @@ static void ath_init_leds(struct ath_sof
+ 	char *trigger;
+ 	int ret;
+ 
++#if 0
++	if (AR_SREV_9100(sc->sc_ah))
++		return;
++#endif
++
+ 	/* Configure gpio 1 for output */
+ 	ath9k_hw_cfg_output(sc->sc_ah, ATH_LED_PIN,
+ 			    AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
+--- a/drivers/net/wireless/ath9k/hw.c
++++ b/drivers/net/wireless/ath9k/hw.c
+@@ -3527,6 +3527,9 @@ void ath9k_hw_cfg_output(struct ath_hal 
+ 
+ void ath9k_hw_set_gpio(struct ath_hal *ah, u32 gpio, u32 val)
+ {
++	if (AR_SREV_9100(ah))
++		return;
++
+ 	REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
+ 		AR_GPIO_BIT(gpio));
+ }
-- 
2.30.2