ar71xx: Add support for TP-Link CPE210 v2

This PR adds support for a popular low-cost 2.4GHz N based AP

Specifications:
 - SoC: Qualcomm Atheros QCA9533 (650MHz)
 - RAM: 64MB
 - Storage: 8 MB SPI NOR
 - Wireless: 2.4GHz N based built into SoC 2x2
 - Ethernet: 1x 100/10 Mbps, integrated into SoC, 24V POE IN

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

Notes:
TP-Link does not use bootstrap registers so without this patch reference
clock detects as 40MHz while it is actually 25MHz.
This is due to messed up bootstrap resistor configuration on the PCB.
Provided GPL code just forces 25MHz reference clock.
That causes booting with completely wrong clocks, for example, CPU tries
to boot at 1040MHz while the stock is 650MHz.
So this PR depends on PR #672 to remove 40MHz reference clock.
Thanks to Sven Eckelmann <sven@narfation.org> for properly patching that.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 10577cbaaf33696473137301a1c74fbe756a3c61..c7942d1ef6216362e6fb6af594c22711498098b9 100644 (file)
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -155,6 +155,48 @@ static struct device_info boards[] = {
                .last_sysupgrade_partition = "support-list",
        },
 
+       /** Firmware layout for the CPE210 V2 */
+       {
+               .id     = "CPE210V2",
+               .vendor = "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n",
+               .support_list =
+                       "SupportList:\r\n"
+                       "CPE210(TP-LINK|EU|N300-2|00000000):2.0\r\n"
+                       "CPE210(TP-LINK|EU|N300-2|45550000):2.0\r\n"
+                       "CPE210(TP-LINK|EU|N300-2|55530000):2.0\r\n"
+                       "CPE210(TP-LINK|UN|N300-2|00000000):2.0\r\n"
+                       "CPE210(TP-LINK|UN|N300-2|45550000):2.0\r\n"
+                       "CPE210(TP-LINK|UN|N300-2|55530000):2.0\r\n"
+                       "CPE210(TP-LINK|US|N300-2|55530000):2.0\r\n"
+                       "CPE210(TP-LINK|UN|N300-2):2.0\r\n"
+                       "CPE210(TP-LINK|EU|N300-2):2.0\r\n"
+                       "CPE210(TP-LINK|US|N300-2):2.0\r\n",
+               .support_trail = '\xff',
+               .soft_ver = NULL,
+
+               .partitions = {
+                       {"fs-uboot", 0x00000, 0x20000},
+                       {"partition-table", 0x20000, 0x02000},
+                       {"default-mac", 0x30000, 0x00020},
+                       {"product-info", 0x31100, 0x00100},
+                       {"device-info", 0x31400, 0x00400},
+                       {"signature", 0x32000, 0x00400},
+                       {"device-id", 0x33000, 0x00100},
+                       {"os-image", 0x40000, 0x1c0000},
+                       {"file-system", 0x200000, 0x5b0000},
+                       {"soft-version", 0x7b0000, 0x00100},
+                       {"support-list", 0x7b1000, 0x01000},
+                       {"user-config", 0x7c0000, 0x10000},
+                       {"default-config", 0x7d0000, 0x10000},
+                       {"log", 0x7e0000, 0x10000},
+                       {"radio", 0x7f0000, 0x10000},
+                       {NULL, 0, 0}
+               },
+
+               .first_sysupgrade_partition = "os-image",
+               .last_sysupgrade_partition = "support-list",
+       },
+
        /** Firmware layout for the CPE510/520 */
        {
                .id     = "CPE510",