applications/luci-coovachilli/root/etc/config/chillispot

   1 ##############################################################################
   2 #
   3 # Sample ChilliSpot configuration file
   4 #
   5 ##############################################################################
   6
   7 # General settings
   8 config general
   9
  10         # Enable this flag to include debug information.
  11         option debug    0
  12
  13         # Re-read configuration file at this interval. Will also cause new domain
  14         # name lookups to be performed. Value is given in seconds.
  15         option interval 3600
  16
  17         # File to store information about the process id of the program.
  18         # The program must have write access to this file/directory.
  19         option pidfile  /var/run/chilli.pid
  20
  21         # Directory to use for nonvolatile storage.
  22         # The program must have write access to this directory.
  23         # This tag is currently ignored
  24         #option statedir        ./
  25
  26
  27 # Remote configuration management
  28 config remoteconfig
  29
  30         # If confusername is specified together with confpassword chillispot
  31         # will at regular intervals specified by the interval option query the
  32         # radius server for configuration information.
  33         # Normally you do not need to uncomment this tag.
  34         option confusername     ""
  35
  36         # If confusername is specified together with confpassword chillispot
  37         # will at regular intervals specified by the interval option query the
  38         # radius server for configuration information.
  39         # Normally you do not need to uncomment this tag.
  40         option confpassword     ""
  41
  42
  43 # TUN parameters
  44 config tun
  45
  46         # IP network address of external packet data network
  47         # Used to allocate dynamic IP addresses and set up routing.
  48         # Normally you do not need to uncomment this tag.
  49         option net      192.168.182.0/24
  50
  51         # Dynamic IP address pool
  52         # Used to allocate dynamic IP addresses to clients.
  53         # If not set it defaults to the net tag.
  54         # Do not uncomment this tag unless you are an experienced user!
  55         #option dynip   192.168.182.0/24
  56
  57         # Static IP address pool
  58         # Used to allocate static IP addresses to clients.
  59         # Do not uncomment this tag unless you are an experienced user!
  60         #option statip  192.168.182.0/24
  61
  62         # Primary DNS server.
  63         # Will be suggested to the client.
  64         # If omitted the system default will be used.
  65         # Normally you do not need to uncomment this tag.
  66         #option dns1    172.16.0.5
  67
  68         # Secondary DNS server.
  69         # Will be suggested to the client.
  70         # If omitted the system default will be used.
  71         # Normally you do not need to uncomment this tag.
  72         #option dns2    172.16.0.6
  73
  74         # Domain name
  75         # Will be suggested to the client.
  76         # Normally you do not need to uncomment this tag.
  77         option domain   key.chillispot.org
  78
  79         # Script executed after network interface has been brought up.
  80         # Executed with the following parameters: <devicename> <ip address> <mask>
  81         # Normally you do not need to uncomment this tag.
  82         #option ipup    /etc/chilli.ipup
  83
  84         # Script executed after network interface has been taken down.
  85         # Executed with the following parameters: <devicename> <ip address> <mask>
  86         # Normally you do not need to uncomment this tag.
  87         #option ipdown  /etc/chilli.ipdown
  88
  89         # Script executed after a user has been authenticated.
  90         # Executed with the following parameters: <devicename> <ip address>
  91         # <mask> <user ip address> <user mac address> <filter ID>
  92         # Normally you do not need to uncomment this tag.
  93         #option conup   /etc/chilli.conup
  94
  95         # Script executed after a user has disconnected.
  96         # Executed with the following parameters: <devicename> <ip address>
  97         # <mask> <user ip address> <user mac address> <filter ID>
  98         # Normally you do not need to uncomment this tag.
  99         #option condown /etc/chilli.condown
 100
 101
 102 # DHCP Parameters
 103 config dhcp
 104
 105         # Ethernet interface to listen to.
 106         # This is the network interface which is connected to the access points.
 107         # In a typical configuration this tag should be set to eth1.
 108         option dhcpif   eth1
 109
 110         # Use specified MAC address.
 111         # An address in the range  00:00:5E:00:02:00 - 00:00:5E:FF:FF:FF falls
 112         # within the IANA range of addresses and is not allocated for other
 113         # purposes.
 114         # Normally you do not need to uncomment this tag.
 115         #option dhcpmac 00:00:5E:00:02:00
 116
 117         # Time before DHCP lease expires
 118         # Normally you do not need to uncomment this tag.
 119         #option lease   600
 120
 121
 122 # Radius parameters
 123 config radius
 124
 125         # IP address to listen to
 126         # Normally you do not need to uncomment this tag.
 127         #option radiuslisten    127.0.0.1
 128
 129         # IP address of radius server 1
 130         # For most installations you need to modify this tag.
 131         option radiusserver1    rad01.chillispot.org
 132
 133         # IP address of radius server 2
 134         # If you have only one radius server you should set radiusserver2 to the
 135         # same value as radiusserver1.
 136         # For most installations you need to modify this tag.
 137         option radiusserver2    rad02.chillispot.org
 138
 139         # Radius authentication port
 140         # The UDP port number to use for radius authentication requests.
 141         # The same port number is used for both radiusserver1 and radiusserver2.
 142         # Normally you do not need to uncomment this tag.
 143         #option radiusauthport  1812
 144
 145         # Radius accounting port
 146         # The UDP port number to use for radius accounting requests.
 147         # The same port number is used for both radiusserver1 and radiusserver2.
 148         # Normally you do not need to uncomment this tag.
 149         #option radiusacctport  1813
 150
 151         # Radius shared secret for both servers
 152         # For all installations you should modify this tag.
 153         #option radiussecret    testing123
 154
 155         # Radius NAS-Identifier
 156         # Normally you do not need to uncomment this tag.
 157         #option radiusnasid     nas01
 158
 159         # Radius NAS-IP-Address
 160         # Normally you do not need to uncomment this tag.
 161         #option radiusnasip     127.0.0.1
 162
 163         # Radius Called-Station-ID
 164         # Normally you do not need to uncomment this tag.
 165         #option radiuscalled    00133300
 166
 167         # WISPr Location ID. Should be in the format: isocc=<ISO_Country_Code>,
 168         # cc=<E.164_Country_Code>,ac=<E.164_Area_Code>,network=<ssid/ZONE>
 169         # Normally you do not need to uncomment this tag.
 170         #option radiuslocationid        isocc=us,cc=1,ac=408,network=ACMEWISP_NewarkAirport
 171
 172         # WISPr Location Name. Should be in the format:
 173         # <HOTSPOT_OPERATOR_NAME>,<LOCATION>
 174         # Normally you do not need to uncomment this tag.
 175         #option radiuslocationname      ACMEWISP,Gate_14_Terminal_C_of_Newark_Airport
 176
 177
 178 # Radius proxy parameters
 179 config proxy
 180
 181         # IP address to listen to
 182         # Normally you do not need to uncomment this tag.
 183         #option proxylisten     10.0.0.1
 184
 185         # UDP port to listen to.
 186         # If not specified a port will be selected by the system
 187         # Normally you do not need to uncomment this tag.
 188         #option proxyport       1645
 189
 190         # Client(s) from which we accept radius requests
 191         # Normally you do not need to uncomment this tag.
 192         #option proxyclient     10.0.0.1/24
 193
 194         # Radius proxy shared secret for all clients
 195         # If not specified defaults to radiussecret
 196         # Normally you do not need to uncomment this tag.
 197         #option proxysecret     testing123
 198
 199
 200 # Universal access method (UAM) parameters
 201 config uam
 202
 203         # URL of web server handling authentication.
 204         option uamserver        https://radius.chillispot.org/hotspotlogin
 205
 206         # URL of welcome homepage.
 207         # Unauthenticated users will be redirected to this URL. If not specified
 208         # users will be redirected to the uamserver instead.
 209         # Normally you do not need to uncomment this tag.
 210         #option uamhomepage     http://192.168.182.1/welcome.html
 211
 212         # Shared between chilli and authentication web server
 213         #option uamsecret       ht2eb8ej6s4et3rg1ulp
 214
 215         # IP address to listen to for authentication requests
 216         # Do not uncomment this tag unless you are an experienced user!
 217         #option uamlisten       192.168.182.1
 218
 219         # TCP port to listen to for authentication requests
 220         # Do not uncomment this tag unless you are an experienced user!
 221         #option uamport 3990
 222
 223         # Comma separated list of domain names, IP addresses or network segments
 224         # the client can access without first authenticating.
 225         # It is possible to specify this tag multiple times.
 226         # Normally you do not need to uncomment this tag.
 227         #list uamallowed        www.chillispot.org
 228         #list uamallowed        10.11.12.0/24
 229
 230         # If this flag is given unauthenticated users are allowed to use
 231         # any DNS server.
 232         # Normally you do not need to uncomment this tag.
 233         #uamanydns
 234
 235
 236 # MAC authentication
 237 config macauth
 238
 239         # If this flag is given users will be authenticated only on their MAC
 240         # address.
 241         # Normally you do not need to enable this flag.
 242         option macauth  0
 243
 244         # List of MAC addresses.
 245         # The MAC addresses specified in this list will be authenticated only on
 246         # their MAC address.
 247         # This tag is ignored if the macauth tag is given.
 248         # It is possible to specify this tag multiple times.
 249         # Normally you do not need to uncomment this tag.
 250         #list macallowed        00-0A-5E-AC-BE-51
 251         #list macallowed        00-30-1B-3C-32-E9
 252
 253         # Password to use for MAC authentication.
 254         # Normally you do not need to uncomment this tag.
 255         #option macpasswd       password
 256
 257         # Suffix to add to MAC address in order to form the username.
 258         # Normally you do not need to uncomment this tag.
 259         #option macsuffix       suffix