modules/admin-full: Several user interface improvements
[project/luci.git] / i18n / english / luasrc / i18n / admin-core.en.lua
1 uci_applied = "The following changes have been applied"
2 uci_reverted = "The following changes have been reverted"
3
4 a_i_ui = "User Interface"
5
6 c_lucidesc = [[LuCI is a collection of free Lua software including an MVC-Webframework and webinterface for embedded devices.
7 Luci is licensed under the Apache-License.]]
8 c_projecthome = "Project Homepage"
9 c_leaddev = "Lead Development"
10 c_contributors = "Contributing Developers"
11 c_thanksto = "Thanks To"
12
13 a_i_i_hello = "Hello!"
14 a_i_i_admin1 = "This is the administration area of LuCI."
15 a_i_i_admin2 = "LuCI is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze."
16 a_i_i_admin3 = "On the following pages you can adjust all important settings of your router."
17 a_i_i_admin4 = [[Notice: In LuCI changes have to be confirmed by clicking Changes - Apply before being applied.]]
18 a_i_i_admin5 = [[As we are always want to improve this interface we are looking forward
19 to your feedback and suggestions.]]
20 a_i_i_admin6 = "And now have fun with your router!"
21 a_i_i_team = "The LuCI Team"
22
23 a_i_luci1 = "Here you can customize the settings and the functionality of LuCI."
24 a_i_ucicommit = "Post-commit actions"
25 a_i_ucicommit1 = [[These commands will be executed automatically when a given UCI configuration is committed allowing
26 changes to be applied instantly.]]
27 a_i_keepflash = "Files to be kept when flashing a new firmware"
28 a_i_keepflash1 = "When flashing a new firmware with LuCI these files will be added to the new firmware installation."
29
30 a_st_i_status1 = [[Here you can find information about the current system status like CPU clock frequency, memory
31 usage or network interface data.]]
32 a_st_i_status2 = [[Also kernel or service logfiles can be viewed here to get an overview over their current state.]]
33
34 iwscan = "WLAN-Scan"
35 iwscan1 = "Wifi networks in your local environment"
36 iwscan_encr = "Encr."
37 iwscan_link = "Link"
38 iwscan_signal = "Signal"
39 iwscan_noise = "Noise"
40
41 routes = "Routes"
42 routes_netmask = "Netmask"
43 routes_gateway = "Gateway"
44 routes_metric = "Metric"
45
46 a_s_desc = "Here you can configure the basic aspects of your device like its hostname or the timezone."
47 a_s_packages = "Software"
48 a_s_changepw = "Admin Password"
49 a_s_p_ipkg = "IPKG-Configuration"
50 a_s_sshkeys = "SSH-Keys"
51 a_s_fstab = "Mount Points"
52 a_s_flash = "Flash Firmware"
53
54 a_s_i_system1 = [[Change settings related to the system itself, its identification,
55 installed hard- and software, authentication or mount points.]]
56 a_s_i_system2 = [[These settings define the base of your system.]]
57 a_s_i_system3 = [[Pay attention as any misconfiguration here may prevent your device from booting
58 or may lock yourself out of it.]]
59
60 a_s_packages_do = "Perform Actions"
61 a_s_packages_install = "Install"
62 a_s_packages_installurl = "Download and install package"
63 a_s_packages_ipkg = "Edit package lists and installation targets"
64 a_s_packages_name = "Paketname"
65 a_s_packages_remove = "Remove"
66 a_s_packages_search = "Find package"
67 a_s_packages_update = "Package lists updated"
68 a_s_packages_updatelist = "Update package lists"
69 a_s_packages_upgrade = "Upgrade installed packages"
70
71 a_s_p_ipkg_pkglists = "Package lists"
72 a_s_p_ipkg_targets = "Installation targets"
73
74 a_s_changepw1 = "Change the password of the system administrator (User \"root\")"
75 a_s_changepw_changed = "Password successfully changed"
76 a_s_changepw_nomatch = "Error: Passwords do not match"
77
78 a_s_sshkeys1 = "Here you can paste public SSH-Keys (one per line) for SSH public-key authentication."
79
80 a_s_fstab_mountpoints = "Mount Points"
81 a_s_fstab_mountpoints1 = "Mount Points define at which point a memory device will be attached to the filesystem"
82
83 a_s_fstab_mountpoint = "Mount Point"
84 a_s_fstab_device1 = "The device file of the memory or partition (e.g. /dev/sda1)"
85 a_s_fstab_fs1 = "The filesystem that was used to format the memory (e.g. ext3)"
86 a_s_fstab_swap1 = [[If your physical memory is insufficient unused data can be temporarily swapped
87 to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very slow process
88 as the swap-device cannot be accessed with the high datarates of the RAM.]]
89
90 a_s_flash_flashed = "Firmware successfully flashed. Rebooting device..."
91 a_s_flash_flasherr = "Failed to flash"
92 a_s_flash_fwimage = "Firmwareimage"
93 a_s_flash_fwupgrade = "Flash Firmware"
94 a_s_flash_keepcfg = "Keep configuration files"
95 a_s_flash_notimplemented = "Sorry, this function is not (yet) available for your platform."
96 a_s_flash_upgrade1 = "Replaces the installed firmware with a new one. The firmware format is platform-dependent."
97
98 a_s_reboot1 = "Reboots the operating system of your device"
99 a_s_reboot_do = "Perform reboot"
100 a_s_reboot_running = "Please wait: Device rebooting..."
101 a_s_reboot_u = "Warning: There are unsaved changes that will be lost while rebooting!"
102
103 a_s_applyreboot1 = "Changes applied."
104
105 a_s_backup = "Backup / Restore"
106 a_s_backup_backup = "Create backup"
107 a_s_backup_archive = "Backup Archive"
108 a_s_backup_reset = "Reset router to defaults"
109 a_s_backup_reset1 = "Proceed reverting all settings and resetting to firmware defaults?"
110 a_s_backup_restore = "Restore backup"
111 a_s_backup1 = [[Here you can backup and restore your router configuration
112 and - if possible - reset the router to the default settings.]]
113
114
115 a_srv_http = "HTTP-Server"
116 a_srv_ssh = "SSH-Server"
117
118 a_srv_services1 = "Services and daemons perform certain tasks on your device."
119 a_srv_services2 = [[Most of them are network servers, that offer a certain service for your device or network like
120 shell access, serving webpages like LuCI, doing mesh routing, sending e-mails, ...]]
121
122 a_srv_http1 = "A small webserver which can be used to serve LuCI."
123 a_srv_http_authrealm = "Authentication Realm"
124 a_srv_http_authrealm1 = "The realm which will be displayed at the authentication prompt for protected pages."
125 a_srv_http_config1 = "defaults to /etc/httpd.conf"
126 a_srv_http_root = "Document root"
127
128 a_srv_dropbear1 = "Dropbear offers SSH network shell access and an integrated SCP server"
129 a_srv_d_pwauth = "Password authentication"
130 a_srv_d_pwauth1 = "Allow SSH password authentication"
131
132 a_w_wifi1 = [[On this pages you find confiugration options for WLAN based wireless networks.]]
133 a_w_wifi2 = [[You can easily integrate your 802.11a/b/g/n-devices into your physical network and use
134 the virtual adapter support to build wireless repeaters or offer several networks with one device.]]
135 a_w_wifi3 = [[There is support for Managed, Client, Ad-Hoc and WDS operating modes as well as
136 WPA and WPA2 encryption for secure communnication.]]
137
138 a_w_devices1 = "Here you can configure installed wifi devices."
139 a_w_channel = "Channel"
140 a_w_txantenna = "Transmit Antenna"
141 a_w_rxantenna = "Receive Antenna"
142 a_w_distance1 = "Distance to furthest station (m)"
143 a_w_diversity = "Diversity"
144 a_w_countrycode = "Country Code"
145 a_w_connlimit = "Connection Limit"
146
147 a_w_networks1 = [[You can run several wifi networks with one device. Be aware that there are certain
148 hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode
149 network simultaneously.]]
150 a_w_netid = "Network Name (ESSID)"
151 a_w_network1 = "Add the Wifi network to physical network"
152 a_w_txpwr = "Transmit Power"
153 a_w_brcmburst = "Broadcom Frameburst"
154 a_w_athburst = "Atheros Frameburst"
155 a_w_radiussrv = "Radius-Server"
156 a_w_radiusport = "Radius-Port"
157 a_w_apisolation = "AP-Isolation"
158 a_w_apisolation1 = "Prevents Client to Client communication"
159 a_w_hideessid = "Hide ESSID"
160 a_w_ap = "Access Point"
161 a_w_adhoc = "Ad-Hoc"
162 a_w_client = "Client"
163 a_w_wds = "WDS"
164
165 dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
166 dhcp_dnsmasq_domainneeded = "Domain required"
167 dhcp_dnsmasq_domainneeded_desc = "Don't forward DNS-Requests without DNS-Name"
168 dhcp_dnsmasq_authoritative = "Authoritative"
169 dhcp_dnsmasq_authoritative_desc = "This is the only DHCP in the local network"
170 dhcp_dnsmasq_boguspriv = "Filter private"
171 dhcp_dnsmasq_boguspriv_desc = "Don't forward reverse lookups for local networks"
172 dhcp_dnsmasq_filterwin2k = "Filter useless"
173 dhcp_dnsmasq_filterwin2k_desc = "filter useless DNS-queries of Windows-systems"
174 dhcp_dnsmasq_localisequeries = "Localise queries"
175 dhcp_dnsmasq_localisequeries_desc = "localises the hostname depending on its subnet"
176 dhcp_dnsmasq_local = "Local Server"
177 dhcp_dnsmasq_domain = "Local Domain"
178 dhcp_dnsmasq_expandhosts = "Expand Hosts"
179 dhcp_dnsmasq_expandhosts_desc = "adds domain names to hostentries in the resolv file"
180 dhcp_dnsmasq_nonegcache = "don't cache unknown"
181 dhcp_dnsmasq_nonegcache_desc = "prevents caching of negative DNS-replies"
182 dhcp_dnsmasq_readethers = "Use /etc/ethers"
183 dhcp_dnsmasq_readethers_desc = "Read /etc/ethers to configure the DHCP-Server"
184 dhcp_dnsmasq_leasefile = "Leasefile"
185 dhcp_dnsmasq_leasefile_desc = "file where given DHCP-leases will be stored"
186 dhcp_dnsmasq_resolvfile = "Resolvfile"
187 dhcp_dnsmasq_resolvfile_desc = "local DNS file"
188 dhcp_dnsmasq_nohosts = "Ignore /etc/hosts"
189 dhcp_dnsmasq_strictorder = "Strict order"
190 dhcp_dnsmasq_strictorder_desc = "DNS-Server will be queried in the order of the resolvfile"
191 dhcp_dnsmasq_logqueries = "Log queries"
192 dhcp_dnsmasq_noresolv = "Ignore resolve file"
193 dhcp_dnsmasq_dnsforwardmax = "concurrent queries"
194 dhcp_dnsmasq_port = "DNS-Port"
195 dhcp_dnsmasq_ednspacket_max = "max. EDNS.0 paket size"
196 dhcp_dnsmasq_dhcpleasemax = "max. DHCP-Leases"
197 dhcp_dnsmasq_addnhosts = "additional hostfile"
198 dhcp_dnsmasq_queryport = "query port"
199
200 a_n_switch = "Switch"
201 a_n_routes = "Routes"
202
203 a_network1 = "In this area you find all network-related settings."
204 a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
205 a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
206 a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
207 a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
208
209 a_n_switch1 = [[The network ports on your router can be combined to several VLANs
210 in which computers can communicate directly with each other.
211 VLANs are often used to separate different network segments.
212 Often there is by default one Uplink port for a connection to the next greater network like the internet
213 and other ports for a local network.]]
214 network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
215 The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
216 On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
217
218 a_n_ifaces1 = [[On this page you can configure the network interfaces.
219 You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
220 of several network interfaces separated by spaces.
221 You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
222 a_n_i_bridge = "Bridge interfaces"
223 a_n_i_bridge1 = "creates a bridge over specified interface(s)"
224
225 dhcp_desc = [[With DHCP network members can automatically receive
226 their network settings (IP-address, netmaske, DNS-server, ...).]]
227 dhcp_dhcp_leasetime = "Leasetime"
228 dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
229 dhcp_dhcp_ignore = "Ignore interface"
230 dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
231 dhcp_dhcp_force = "Force"
232 dhcp_dhcp_start_desc = "first address (last octet)"
233 dhcp_dhcp_limit_desc = "number of leased addresses -1"
234
235 luci_ethers = "Static Leases"
236
237 a_n_ptp = "Point-to-Point Connections"
238 a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
239 over DSL or similar technologies to an internet access point.]]
240 network_interface_server = "PPTP-Server"
241 network_interface_demand = "Automatic Disconnect"
242 network_interface_demand_desc = "Time (in s) after which an unused connection will be closed"
243 network_interface_keepalive = "Keep-Alive"
244 network_interface_keepalive_desc = "Number of failed connection tests to initiate automatic reconnect"
245
246 a_n_routes = "Static Routes"
247 a_n_routes1 = [[With Static Routes you can specify through which
248 interface and gateway a certain host or network can be reached.]]
249 a_n_r_target1 = "host-IP or network"
250 a_n_r_netmask1 = "if target is a network"
251
252 m_n_local = "Local Network"
253 m_n_inet = "Internet Connection"
254 m_n_route = "Route"
255 m_n_brdige = "Bridge"
256
257 m_w_ap = "Provide (Access Point)"
258 m_w_adhoc = "Independent (Ad-Hoc)"
259 m_w_client = "Join (Client)"
260 m_w_wds = "Distributed (WDS)"
261 m_w_clientmode = "Clientmode"
262
263 system_system_logsize = "System log buffer size"
264 system_system_logip = "External system log server"
265 system_system_conloglevel = "Log output level"
266 system_system_conloglevel_desc = "Level of log messages on the console"
267
268 m_i_processor = "Processor"
269 m_i_memory = "Memory"
270 m_i_systemtime = "Local Time"
271 m_i_uptime = "Uptime"
272
273 m_n_d_firstaddress = "First leased address"
274 m_n_d_numleases = "Number of leased addresses"
275
276 routingtable = "Routing table"
277 wlanscan = "Wifi scan"
278
279 frequency = "Frequency"
280 power = "Power"
281 noise = "Noise"
282 signal = "Signal"
283 link = "Link"
284 frag = "Frag."
285 rts = "RTS"
286 bitrate = "Bitrate"
287
288 m_n_keepalive = "automatically reconnect"
289 m_n_dialondemand = "disconnect when idle for"
290 m_n_pptp_server = "PPTP-Server"