i18n/english/luasrc/i18n/admin-core.en.lua

   1 uci_applied = "The following changes have been applied"
   2 uci_reverted = "The following changes have been reverted"
   3
   4 a_i_ui = "User Interface"
   5
   6 c_lucidesc = [[LuCI is a collection of free Lua software including an MVC-Webframework and webinterface for embedded devices.
   7 Luci is licensed under the Apache-License.]]
   8 c_projecthome = "Project Homepage"
   9 c_leaddev = "Lead Development"
  10 c_contributors = "Contributing Developers"
  11 c_thanksto = "Thanks To"
  12
  13 a_i_i_hello = "Hello!"
  14 a_i_i_admin1 = "This is the administration area of LuCI."
  15 a_i_i_admin2 = "LuCI is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze."
  16 a_i_i_admin3 = "On the following pages you can adjust all important settings of your router."
  17 a_i_i_admin4 = [[Notice: In LuCI changes have to be confirmed by clicking Changes - Apply before being applied.]]
  18 a_i_i_admin5 = [[As we are always want to improve this interface we are looking forward
  19 to your feedback and suggestions.]]
  20 a_i_i_admin6 = "And now have fun with your router!"
  21 a_i_i_team   = "The LuCI Team"
  22
  23 a_i_luci1 = "Here you can customize the settings and the functionality of LuCI."
  24 a_i_ucicommit = "Post-commit actions"
  25 a_i_ucicommit1 = [[These commands will be executed automatically when a given UCI configuration is committed allowing
  26 changes to be applied instantly.]]
  27 a_i_keepflash = "Files to be kept when flashing a new firmware"
  28 a_i_keepflash1 = "When flashing a new firmware with LuCI these files will be added to the new firmware installation."
  29
  30 a_st_i_status1 = [[Here you can find information about the current system status like CPU clock frequency, memory
  31 usage or network interface data.]]
  32 a_st_i_status2 = [[Also kernel or service logfiles can be viewed here to get an overview over their current state.]]
  33
  34 iwscan = "WLAN-Scan"
  35 iwscan1 = "Wifi networks in your local environment"
  36 iwscan_encr = "Encr."
  37 iwscan_link = "Link"
  38 iwscan_signal = "Signal"
  39 iwscan_noise = "Noise"
  40
  41 routes = "Routes"
  42 routes_netmask = "Netmask"
  43 routes_gateway = "Gateway"
  44 routes_metric = "Metric"
  45
  46 a_s_packages = "Software"
  47 a_s_changepw = "Admin Password"
  48 a_s_p_ipkg = "IPKG-Configuration"
  49 a_s_sshkeys = "SSH-Keys"
  50 a_s_fstab = "Mount Points"
  51 a_s_flash = "Flash Firmware"
  52
  53 a_s_i_system1 = [[Change settings related to the system itself, its identification,
  54 installed hard- and software, authentication or mount points.]]
  55 a_s_i_system2 = [[These settings define the base of your system.]]
  56 a_s_i_system3 = [[Pay attention as any misconfiguration here may prevent your device from booting
  57 or may lock yourself out of it.]]
  58
  59 a_s_packages_do = "Perform Actions"
  60 a_s_packages_install = "Install"
  61 a_s_packages_installurl = "Download and install package"
  62 a_s_packages_ipkg = "Edit package lists and installation targets"
  63 a_s_packages_name = "Paketname"
  64 a_s_packages_remove = "Remove"
  65 a_s_packages_search = "Find package"
  66 a_s_packages_update = "Package lists updated"
  67 a_s_packages_updatelist = "Update package lists"
  68 a_s_packages_upgrade = "Upgrade installed packages"
  69
  70 a_s_p_ipkg_pkglists = "Package lists"
  71 a_s_p_ipkg_targets = "Installation targets"
  72
  73 a_s_changepw1 = "Change the password of the system administrator (User \"root\")"
  74 a_s_changepw_changed = "Password successfully changed"
  75 a_s_changepw_nomatch = "Error: Passwords do not match"
  76
  77 a_s_sshkeys1 = "Here you can paste public SSH-Keys (one per line) for SSH public-key authentication."
  78
  79 a_s_fstab_mountpoints = "Mount Points"
  80 a_s_fstab_mountpoints1 = "Mount Points define at which point a memory device will be attached to the filesystem"
  81
  82 a_s_fstab_mountpoint = "Mount Point"
  83 a_s_fstab_device1 = "The device file of the memory or partition (e.g. /dev/sda1)"
  84 a_s_fstab_fs1 = "The filesystem that was used to format the memory (e.g. ext3)"
  85 a_s_fstab_swap1 = [[If your physical memory is insufficient unused data can be temporarily swapped
  86 to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very slow process
  87 as the swap-device cannot be accessed with the high datarates of the RAM.]]
  88
  89 a_s_flash_flashed = "Firmware successfully flashed. Rebooting device..."
  90 a_s_flash_flasherr = "Failed to flash"
  91 a_s_flash_fwimage = "Firmwareimage"
  92 a_s_flash_fwupgrade = "Flash Firmware"
  93 a_s_flash_keepcfg = "Keep configuration files"
  94 a_s_flash_notimplemented = "Sorry, this function is not (yet) available for your platform."
  95 a_s_flash_upgrade1 = "Replaces the installed firmware with a new one. The firmware format is platform-dependent."
  96
  97 a_s_reboot1 = "Reboots the operating system of your device"
  98 a_s_reboot_do = "Perform reboot"
  99 a_s_reboot_running = "Please wait: Device rebooting..."
 100 a_s_reboot_u = "Warning: There are unsaved changes that will be lost while rebooting!"
 101
 102 a_srv_http = "HTTP-Server"
 103 a_srv_ssh = "SSH-Server"
 104
 105 a_srv_services1 = "Services and daemons perform certain tasks on your device."
 106 a_srv_services2 = [[Most of them are network servers, that offer a certain service for your device or network like
 107 shell access, serving webpages like LuCI, doing mesh routing, sending e-mails, ...]]
 108
 109 a_srv_http1 = "A small webserver which can be used to serve LuCI."
 110 a_srv_http_authrealm = "Authentication Realm"
 111 a_srv_http_authrealm1 = "The realm which will be displayed at the authentication prompt for protected pages."
 112 a_srv_http_config1 = "defaults to /etc/httpd.conf"
 113 a_srv_http_root = "Document root"
 114
 115 a_srv_dropbear1 = "Dropbear offers SSH network shell access and an integrated SCP server"
 116 a_srv_d_pwauth = "Password authentication"
 117 a_srv_d_pwauth1 = "Allow SSH password authentication"
 118
 119 a_w_wifi1 = [[On this pages you find confiugration options for WLAN based wireless networks.]]
 120 a_w_wifi2 = [[You can easily integrate your 802.11a/b/g/n-devices into your physical network and use
 121 the virtual adapter support to build wireless repeaters or offer several networks with one device.]]
 122 a_w_wifi3 = [[There is support for Managed, Client, Ad-Hoc and WDS operating modes as well as
 123 WPA and WPA2 encryption for secure communnication.]]
 124
 125 a_w_devices1 = "Here you can configure installed wifi devices."
 126 a_w_channel  = "Channel"
 127 a_w_txantenna = "Transmit Antenna"
 128 a_w_rxantenna = "Receive Antenna"
 129 a_w_distance1 = "Distance to furthest station (m)"
 130 a_w_diversity = "Diversity"
 131 a_w_countrycode = "Country Code"
 132 a_w_connlimit = "Connection Limit"
 133
 134 a_w_networks1 = [[You can run several wifi networks with one device. Be aware that there are certain
 135 hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode
 136 network simultaneously.]]
 137 a_w_netid = "Network Name (ESSID)"
 138 a_w_network1 = "Add the Wifi network to physical network"
 139 a_w_txpwr = "Transmit Power"
 140 a_w_brcmburst = "Broadcom Frameburst"
 141 a_w_athburst = "Atheros Frameburst"
 142 a_w_radiussrv = "Radius-Server"
 143 a_w_radiusport = "Radius-Port"
 144 a_w_apisolation = "AP-Isolation"
 145 a_w_apisolation1 = "Prevents Client to Client communication"
 146 a_w_hideessid = "Hide ESSID"
 147
 148 dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
 149 dhcp_dnsmasq_domainneeded = "Domain required"
 150 dhcp_dnsmasq_domainneeded_desc = "Don't forward DNS-Requests without DNS-Name"
 151 dhcp_dnsmasq_authoritative = "Authoritative"
 152 dhcp_dnsmasq_authoritative_desc = "This is the only DHCP in the local network"
 153 dhcp_dnsmasq_boguspriv = "Filter private"
 154 dhcp_dnsmasq_boguspriv_desc = "Don't forward reverse lookups for local networks"
 155 dhcp_dnsmasq_filterwin2k = "Filter useless"
 156 dhcp_dnsmasq_filterwin2k_desc = "filter useless DNS-queries of Windows-systems"
 157 dhcp_dnsmasq_localisequeries = "Localise queries"
 158 dhcp_dnsmasq_localisequeries_desc = "localises the hostname depending on its subnet"
 159 dhcp_dnsmasq_local = "Local Server"
 160 dhcp_dnsmasq_domain = "Local Domain"
 161 dhcp_dnsmasq_expandhosts = "Expand Hosts"
 162 dhcp_dnsmasq_expandhosts_desc = "adds domain names to hostentries in the resolv file"
 163 dhcp_dnsmasq_nonegcache = "don't cache unknown"
 164 dhcp_dnsmasq_nonegcache_desc = "prevents caching of negative DNS-replies"
 165 dhcp_dnsmasq_readethers = "Use /etc/ethers"
 166 dhcp_dnsmasq_readethers_desc = "Read /etc/ethers to configure the DHCP-Server"
 167 dhcp_dnsmasq_leasefile = "Leasefile"
 168 dhcp_dnsmasq_leasefile_desc = "file where given DHCP-leases will be stored"
 169 dhcp_dnsmasq_resolvfile = "Resolvfile"
 170 dhcp_dnsmasq_resolvfile_desc = "local DNS file"
 171 dhcp_dnsmasq_nohosts = "Ignore /etc/hosts"
 172 dhcp_dnsmasq_strictorder = "Strict order"
 173 dhcp_dnsmasq_strictorder_desc = "DNS-Server will be queried in the order of the resolvfile"
 174 dhcp_dnsmasq_logqueries = "Log queries"
 175 dhcp_dnsmasq_noresolv = "Ignore resolve file"
 176 dhcp_dnsmasq_dnsforwardmax = "concurrent queries"
 177 dhcp_dnsmasq_port = "DNS-Port"
 178 dhcp_dnsmasq_ednspacket_max = "max. EDNS.0 paket size"
 179 dhcp_dnsmasq_dhcpleasemax = "max. DHCP-Leases"
 180 dhcp_dnsmasq_addnhosts = "additional hostfile"
 181 dhcp_dnsmasq_queryport = "query port"
 182
 183 a_n_switch = "Switch"
 184 a_n_routes = "Routes"
 185
 186 a_network1 = "In this area you find all network-related settings."
 187 a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
 188 a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
 189 a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
 190 a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
 191
 192 a_n_switch1 = [[The network ports on your router can be combined to several VLANs
 193 in which computers can communicate directly with each other.
 194 VLANs are often used to separate different network segments.
 195 Often there is by default one Uplink port for a connection to the next greater network like the internet
 196 and other ports for a local network.]]
 197 network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
 198 The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
 199 On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
 200
 201 a_n_ifaces1 = [[On this page you can configure the network interfaces.
 202 You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
 203 of several network interfaces separated by spaces.
 204 You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
 205 a_n_i_bridge = "Bridge interfaces"
 206 a_n_i_bridge1 = "creates a bridge over specified interface(s)"
 207
 208 dhcp_desc = [[With DHCP network members can automatically receive
 209 their network settings (IP-address, netmaske, DNS-server, ...).]]
 210 dhcp_dhcp_leasetime = "Leasetime"
 211 dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
 212 dhcp_dhcp_ignore = "Ignore interface"
 213 dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
 214 dhcp_dhcp_force = "Force"
 215 dhcp_dhcp_start_desc = "first address (last octet)"
 216 dhcp_dhcp_limit_desc = "number of leased addresses -1"
 217
 218 luci_ethers = "Static Leases"
 219
 220 a_n_ptp = "Point-to-Point Connections"
 221 a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
 222 over DSL or similar technologies to an internet access point.]]
 223 network_interface_server = "PPTP-Server"
 224 network_interface_demand = "Automatic Disconnect"
 225 network_interface_demand_desc = "Time after which an unused connection will be closed"
 226 network_interface_keepalive = "Keep-Alive"
 227 network_interface_keepalive_desc = "Reconnect lost connections"
 228
 229 a_n_routes = "Static Routes"
 230 a_n_routes1 = [[With Static Routes you can specify through which
 231 interface and gateway a certain host or network can be reached.]]
 232 a_n_r_target1 = "host-IP or network"
 233 a_n_r_netmask1 = "if target is a network"