User interface improvements part #3
[project/luci.git] / i18n / english / luasrc / i18n / admin-core.en.lua
1 uci_applied = "The following changes have been applied"
2 uci_reverted = "The following changes have been reverted"
3
4 a_i_ui = "User Interface"
5
6 c_lucidesc = [[LuCI is a collection of free Lua software including an MVC-Webframework and webinterface for embedded devices.
7 Luci is licensed under the Apache-License.]]
8 c_projecthome = "Project Homepage"
9 c_leaddev = "Lead Development"
10 c_contributors = "Contributing Developers"
11 c_thanksto = "Thanks To"
12
13 a_i_i_hello = "Hello!"
14 a_i_i_admin1 = "This is the administration area of LuCI."
15 a_i_i_admin2 = "LuCI is a free, flexible, and user friendly graphical interface for configuring OpenWRT Kamikaze."
16 a_i_i_admin3 = "On the following pages you can adjust all important settings of your router."
17 a_i_i_admin4 = [[Notice: In LuCI changes have to be confirmed by clicking Changes - Apply before being applied.]]
18 a_i_i_admin5 = [[As we are always want to improve this interface we are looking forward
19 to your feedback and suggestions.]]
20 a_i_i_admin6 = "And now have fun with your router!"
21 a_i_i_team = "The LuCI Team"
22
23 a_i_luci1 = "Here you can customize the settings and the functionality of LuCI."
24 a_i_ucicommit = "Post-commit actions"
25 a_i_ucicommit1 = [[These commands will be executed automatically when a given UCI configuration is committed allowing
26 changes to be applied instantly.]]
27 a_i_keepflash = "Files to be kept when flashing a new firmware"
28 a_i_keepflash1 = "When flashing a new firmware with LuCI these files will be added to the new firmware installation."
29
30 a_st_i_status1 = [[Here you can find information about the current system status like CPU clock frequency, memory
31 usage or network interface data.]]
32 a_st_i_status2 = [[Also kernel or service logfiles can be viewed here to get an overview over their current state.]]
33
34 iwscan = "WLAN-Scan"
35 iwscan1 = "Wifi networks in your local environment"
36 iwscan_encr = "Encr."
37 iwscan_link = "Link"
38 iwscan_signal = "Signal"
39 iwscan_noise = "Noise"
40
41 routes = "Routes"
42 routes_netmask = "Netmask"
43 routes_gateway = "Gateway"
44 routes_metric = "Metric"
45
46 a_s_desc = "Here you can configure the basic aspects of your device like its hostname or the timezone."
47 a_s_packages = "Software"
48 a_s_changepw = "Admin Password"
49 a_s_p_ipkg = "IPKG-Configuration"
50 a_s_sshkeys = "SSH-Keys"
51 a_s_fstab = "Mount Points"
52 a_s_flash = "Flash Firmware"
53
54 a_s_i_system1 = [[Change settings related to the system itself, its identification,
55 installed hard- and software, authentication or mount points.]]
56 a_s_i_system2 = [[These settings define the base of your system.]]
57 a_s_i_system3 = [[Pay attention as any misconfiguration here may prevent your device from booting
58 or may lock yourself out of it.]]
59
60 a_s_packages_do = "Perform Actions"
61 a_s_packages_install = "Install"
62 a_s_packages_installurl = "Download and install package"
63 a_s_packages_ipkg = "Edit package lists and installation targets"
64 a_s_packages_name = "Paketname"
65 a_s_packages_remove = "Remove"
66 a_s_packages_search = "Find package"
67 a_s_packages_update = "Package lists updated"
68 a_s_packages_updatelist = "Update package lists"
69 a_s_packages_upgrade = "Upgrade installed packages"
70
71 a_s_p_ipkg_pkglists = "Package lists"
72 a_s_p_ipkg_targets = "Installation targets"
73
74 a_s_changepw1 = "Change the password of the system administrator (User \"root\")"
75 a_s_changepw_changed = "Password successfully changed"
76 a_s_changepw_nomatch = "Error: Passwords do not match"
77
78 a_s_sshkeys1 = "Here you can paste public SSH-Keys (one per line) for SSH public-key authentication."
79
80 a_s_fstab_mountpoints = "Mount Points"
81 a_s_fstab_mountpoints1 = "Mount Points define at which point a memory device will be attached to the filesystem"
82
83 a_s_fstab_mountpoint = "Mount Point"
84 a_s_fstab_device1 = "The device file of the memory or partition (e.g. /dev/sda1)"
85 a_s_fstab_fs1 = "The filesystem that was used to format the memory (e.g. ext3)"
86 a_s_fstab_swap1 = [[If your physical memory is insufficient unused data can be temporarily swapped
87 to a swap-device resulting in a higher amount of usable RAM. Be aware that swapping data is a very slow process
88 as the swap-device cannot be accessed with the high datarates of the RAM.]]
89
90 a_s_flash_flashed = "Firmware successfully flashed. Rebooting device..."
91 a_s_flash_flasherr = "Failed to flash"
92 a_s_flash_fwimage = "Firmwareimage"
93 a_s_flash_fwupgrade = "Flash Firmware"
94 a_s_flash_keepcfg = "Keep configuration files"
95 a_s_flash_notimplemented = "Sorry, this function is not (yet) available for your platform."
96 a_s_flash_upgrade1 = "Replaces the installed firmware with a new one. The firmware format is platform-dependent."
97
98 a_s_reboot1 = "Reboots the operating system of your device"
99 a_s_reboot_do = "Perform reboot"
100 a_s_reboot_running = "Please wait: Device rebooting..."
101 a_s_reboot_u = "Warning: There are unsaved changes that will be lost while rebooting!"
102
103 a_s_applyreboot1 = "Changes applied."
104
105 a_s_backup = "Backup / Restore"
106 a_s_backup_backup = "Create backup"
107 a_s_backup_archive = "Backup Archive"
108 a_s_backup_reset = "Reset router to defaults"
109 a_s_backup_reset1 = "Proceed reverting all settings and resetting to firmware defaults?"
110 a_s_backup_restore = "Restore backup"
111 a_s_backup1 = [[Here you can backup and restore your router configuration
112 and - if possible - reset the router to the default settings.]]
113
114
115 a_srv_http = "HTTP-Server"
116 a_srv_ssh = "SSH-Server"
117
118 a_srv_services1 = "Services and daemons perform certain tasks on your device."
119 a_srv_services2 = [[Most of them are network servers, that offer a certain service for your device or network like
120 shell access, serving webpages like LuCI, doing mesh routing, sending e-mails, ...]]
121
122 a_srv_http1 = "A small webserver which can be used to serve LuCI."
123 a_srv_http_authrealm = "Authentication Realm"
124 a_srv_http_authrealm1 = "The realm which will be displayed at the authentication prompt for protected pages."
125 a_srv_http_config1 = "defaults to /etc/httpd.conf"
126 a_srv_http_root = "Document root"
127
128 a_srv_dropbear1 = "Dropbear offers SSH network shell access and an integrated SCP server"
129 a_srv_d_pwauth = "Password authentication"
130 a_srv_d_pwauth1 = "Allow SSH password authentication"
131
132 a_w_wifi1 = [[On this pages you find confiugration options for WLAN based wireless networks.]]
133 a_w_wifi2 = [[You can easily integrate your 802.11a/b/g/n-devices into your physical network and use
134 the virtual adapter support to build wireless repeaters or offer several networks with one device.]]
135 a_w_wifi3 = [[There is support for Managed, Client, Ad-Hoc and WDS operating modes as well as
136 WPA and WPA2 encryption for secure communnication.]]
137
138 a_w_devices1 = "Here you can configure installed wifi devices."
139 a_w_channel = "Channel"
140 a_w_txantenna = "Transmit Antenna"
141 a_w_rxantenna = "Receive Antenna"
142 a_w_distance1 = "Distance to furthest station (m)"
143 a_w_diversity = "Diversity"
144 a_w_countrycode = "Country Code"
145 a_w_connlimit = "Connection Limit"
146
147 a_w_networks1 = [[You can run several wifi networks with one device. Be aware that there are certain
148 hardware and driverspecific restrictions. Normally you can operate 1 Ad-Hoc or up to 3 Master-Mode and 1 Client-Mode
149 network simultaneously.]]
150 a_w_netid = "Network Name (ESSID)"
151 a_w_network1 = "Add the Wifi network to physical network"
152 a_w_txpwr = "Transmit Power"
153 a_w_brcmburst = "Broadcom Frameburst"
154 a_w_athburst = "Atheros Frameburst"
155 a_w_radiussrv = "Radius-Server"
156 a_w_radiusport = "Radius-Port"
157 a_w_apisolation = "AP-Isolation"
158 a_w_apisolation1 = "Prevents Client to Client communication"
159 a_w_hideessid = "Hide ESSID"
160 a_w_ap = "Access Point"
161 a_w_adhoc = "Ad-Hoc"
162 a_w_ahdemo = "Pseudo Ad-Hoc (ahdemo)"
163 a_w_client = "Client"
164 a_w_wds = "WDS"
165 a_w_monitor = "Monitor"
166
167 dhcp_desc = "Dnsmasq is a combined DHCP-Server and DNS-Forwarder for NAT firewalls"
168 dhcp_dnsmasq_domainneeded = "Domain required"
169 dhcp_dnsmasq_domainneeded_desc = "Don't forward DNS-Requests without DNS-Name"
170 dhcp_dnsmasq_authoritative = "Authoritative"
171 dhcp_dnsmasq_authoritative_desc = "This is the only DHCP in the local network"
172 dhcp_dnsmasq_boguspriv = "Filter private"
173 dhcp_dnsmasq_boguspriv_desc = "Don't forward reverse lookups for local networks"
174 dhcp_dnsmasq_filterwin2k = "Filter useless"
175 dhcp_dnsmasq_filterwin2k_desc = "filter useless DNS-queries of Windows-systems"
176 dhcp_dnsmasq_localisequeries = "Localise queries"
177 dhcp_dnsmasq_localisequeries_desc = "localises the hostname depending on its subnet"
178 dhcp_dnsmasq_local = "Local Server"
179 dhcp_dnsmasq_domain = "Local Domain"
180 dhcp_dnsmasq_expandhosts = "Expand Hosts"
181 dhcp_dnsmasq_expandhosts_desc = "adds domain names to hostentries in the resolv file"
182 dhcp_dnsmasq_nonegcache = "don't cache unknown"
183 dhcp_dnsmasq_nonegcache_desc = "prevents caching of negative DNS-replies"
184 dhcp_dnsmasq_readethers = "Use /etc/ethers"
185 dhcp_dnsmasq_readethers_desc = "Read /etc/ethers to configure the DHCP-Server"
186 dhcp_dnsmasq_leasefile = "Leasefile"
187 dhcp_dnsmasq_leasefile_desc = "file where given DHCP-leases will be stored"
188 dhcp_dnsmasq_resolvfile = "Resolvfile"
189 dhcp_dnsmasq_resolvfile_desc = "local DNS file"
190 dhcp_dnsmasq_nohosts = "Ignore /etc/hosts"
191 dhcp_dnsmasq_strictorder = "Strict order"
192 dhcp_dnsmasq_strictorder_desc = "DNS-Server will be queried in the order of the resolvfile"
193 dhcp_dnsmasq_logqueries = "Log queries"
194 dhcp_dnsmasq_noresolv = "Ignore resolve file"
195 dhcp_dnsmasq_dnsforwardmax = "concurrent queries"
196 dhcp_dnsmasq_port = "DNS-Port"
197 dhcp_dnsmasq_ednspacket_max = "max. EDNS.0 paket size"
198 dhcp_dnsmasq_dhcpleasemax = "max. DHCP-Leases"
199 dhcp_dnsmasq_addnhosts = "additional hostfile"
200 dhcp_dnsmasq_queryport = "query port"
201
202 a_n_switch = "Switch"
203 a_n_routes = "Routes"
204
205 a_network1 = "In this area you find all network-related settings."
206 a_network2 = "On most routers the network switch can be freely configured and splitted up into several VLANs."
207 a_network3 = "Interfaces and PPPoE / PPTP-Settings allow a custom organisation of the network and connections to other networks like the internet."
208 a_network4 = "With DHCP devices in your local network can be automatically configured for network communication."
209 a_network5 = "Firewall and portforwarding can be used to secure your network while providing services to external networks."
210
211 a_n_switch1 = [[The network ports on your router can be combined to several VLANs
212 in which computers can communicate directly with each other.
213 VLANs are often used to separate different network segments.
214 Often there is by default one Uplink port for a connection to the next greater network like the internet
215 and other ports for a local network.]]
216 network_switch_desc = [[Ports belonging to a VLAN are separated with spaces.
217 The port with the highest number (usually 5) is oftern the connection to the internal network interface of the router.
218 On devices with 5 ports often the one with the lowest number (0) is the predefined Uplink port.]]
219
220 a_n_ifaces1 = [[On this page you can configure the network interfaces.
221 You can bridge several interfaces by ticking the "bridge interfaces" field and enter the names
222 of several network interfaces separated by spaces.
223 You can also use VLAN notation INTERFACE.VLANNR (e.g.: eth0.1).]]
224 a_n_i_bridge = "Bridge interfaces"
225 a_n_i_bridge1 = "creates a bridge over specified interface(s)"
226
227 dhcp_desc = [[With DHCP network members can automatically receive
228 their network settings (IP-address, netmaske, DNS-server, ...).]]
229 dhcp_dhcp_leasetime = "Leasetime"
230 dhcp_dhcp_dynamicdhcp = "Dynamic DHCP"
231 dhcp_dhcp_ignore = "Ignore interface"
232 dhcp_dhcp_ignore_desc = "disable DHCP for this interface"
233 dhcp_dhcp_force = "Force"
234 dhcp_dhcp_start_desc = "first address (last octet)"
235 dhcp_dhcp_limit_desc = "number of leased addresses -1"
236
237 luci_ethers = "Static Leases"
238
239 a_n_ptp = "Point-to-Point Connections"
240 a_n_ptp1 = [[Point-to-Point connections with PPPoE or PPTP are often used to connect a device
241 over DSL or similar technologies to an internet access point.]]
242 network_interface_server = "PPTP-Server"
243 network_interface_demand = "Automatic Disconnect"
244 network_interface_demand_desc = "Time (in s) after which an unused connection will be closed"
245 network_interface_keepalive = "Keep-Alive"
246 network_interface_keepalive_desc = "Number of failed connection tests to initiate automatic reconnect"
247
248 a_n_routes = "Static Routes"
249 a_n_routes1 = [[With Static Routes you can specify through which
250 interface and gateway a certain host or network can be reached.]]
251 a_n_r_target1 = "host-IP or network"
252 a_n_r_netmask1 = "if target is a network"
253
254 m_n_local = "Local Network"
255 m_n_inet = "Internet Connection"
256 m_n_route = "Route"
257 m_n_brdige = "Bridge"
258
259 m_w_ap = "Provide (Access Point)"
260 m_w_adhoc = "Independent (Ad-Hoc)"
261 m_w_client = "Join (Client)"
262 m_w_wds = "Distributed (WDS)"
263 m_w_clientmode = "Clientmode"
264
265 system_system_logsize = "System log buffer size"
266 system_system_logip = "External system log server"
267 system_system_conloglevel = "Log output level"
268 system_system_conloglevel_desc = "Level of log messages on the console"
269
270 m_i_processor = "Processor"
271 m_i_memory = "Memory"
272 m_i_systemtime = "Local Time"
273 m_i_uptime = "Uptime"
274
275 m_n_d_firstaddress = "First leased address"
276 m_n_d_numleases = "Number of leased addresses"
277
278 routingtable = "Routing table"
279 wlanscan = "Wifi scan"
280
281 frequency = "Frequency"
282 power = "Power"
283 noise = "Noise"
284 signal = "Signal"
285 link = "Link"
286 frag = "Frag."
287 rts = "RTS"
288 bitrate = "Bitrate"
289
290 m_n_keepalive = "automatically reconnect"
291 m_n_dialondemand = "disconnect when idle for"
292 m_n_pptp_server = "PPTP-Server"
293
294 leds = "LED Configuration"
295 leds_desc = "Customizes the behaviour of the device LEDs if possible."
296 system_led_name = "LED Name"
297 system_led_sysfs = "LED Device"
298 system_led_default = "Default state"
299 system_led_default_desc = "ticked = on"
300 system_led_trigger = "Trigger"
301 system_led_trigger_none = "None"
302 system_led_trigger_defaulton = "Default On"
303 system_led_trigger_timer = "Timer"
304 system_led_trigger_heartbeat = "Heartbeat (Load Average)"
305 system_led_trigger_netdev = "Network Device"
306 system_led_delayoff = "Off-State Delay"
307 system_led_delayoff_desc = "Time (in ms) the LED is off"
308 system_led_delayon = "On-State Delay"
309 system_led_delayon_desc = "Time (in ms) the LED is on"
310 system_led_dev = "Device"
311 system_led_mode = "Trigger Mode"
312 system_led_mode_link = "Link On"
313 system_led_mode_tx = "Transmit"
314 system_led_mode_rx = "Receive"
315
316 network_interface_up = "Active"
317 network_interface_hwaddr = "MAC-Address"
318 network_interface_hwaddr_desc = "Hardware Address"
319 network_interface_txrx = "Traffic"
320 network_interface_txrx_desc = "transmitted / received"
321 network_interface_err = "Errors"
322 network_interface_err_desc = "TX / RX"
323
324 network_interface_fwzone = "Create / Assign firewall-zone"
325 network_interface_fwzone_desc = "This interface does not belong to any firewall zone yet."