modules/admin-full/luasrc/model/cbi/admin_network/wifi.lua

   1 --[[
   2 LuCI - Lua Configuration Interface
   3
   4 Copyright 2008 Steven Barth <steven@midlink.org>
   5
   6 Licensed under the Apache License, Version 2.0 (the "License");
   7 you may not use this file except in compliance with the License.
   8 You may obtain a copy of the License at
   9
  10         http://www.apache.org/licenses/LICENSE-2.0
  11
  12 $Id$
  13 ]]--
  14
  15 local wa = require "luci.tools.webadmin"
  16 local nw = require "luci.model.network"
  17 local fs = require "nixio.fs"
  18
  19 arg[1] = arg[1] or ""
  20
  21 m = Map("wireless", "",
  22         translate("The <em>Device Configuration</em> section covers physical settings of the radio " ..
  23                 "hardware such as channel, transmit power or antenna selection which is shared among all " ..
  24                 "defined wireless networks (if the radio hardware is multi-SSID capable). Per network settings " ..
  25                 "like encryption or operation mode are grouped in the <em>Interface Configuration</em>."))
  26
  27 m:chain("network")
  28
  29 local ifsection
  30
  31 function m.on_commit(map)
  32         local wnet = nw:get_wifinet(arg[1])
  33         if ifsection and wnet then
  34                 ifsection.section = wnet.sid
  35                 m.title = luci.util.pcdata(wnet:get_i18n())
  36         end
  37 end
  38
  39 nw.init(m.uci)
  40
  41 local wnet = nw:get_wifinet(arg[1])
  42 local wdev = wnet and wnet:get_device()
  43
  44 -- redirect to overview page if network does not exist anymore (e.g. after a revert)
  45 if not wnet or not wdev then
  46         luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless"))
  47         return
  48 end
  49
  50 -- wireless toggle was requested, commit and reload page
  51 if m:formvalue("cbid.wireless.%s.__toggle" % wdev:name()) then
  52         if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
  53                 wnet:set("disabled", nil)
  54         else
  55                 wnet:set("disabled", "1")
  56         end
  57         wdev:set("disabled", nil)
  58
  59         nw:commit("wireless")
  60         luci.sys.call("(env -i /sbin/wifi down; env -i /sbin/wifi up) >/dev/null 2>/dev/null")
  61
  62         luci.http.redirect(luci.dispatcher.build_url("admin/network/wireless", arg[1]))
  63         return
  64 end
  65
  66 m.title = luci.util.pcdata(wnet:get_i18n())
  67
  68
  69 local iw = luci.sys.wifi.getiwinfo(arg[1])
  70 local hw_modes  = iw.hwmodelist or { }
  71 local tx_powers = iw.txpwrlist  or { }
  72 local tx_power  = tostring(
  73         (iw.txpower and iw.txpower > 0 and iw.txpower) or
  74         (#tx_powers > 0 and tx_powers[#tx_powers].dbm)
  75 )
  76
  77 s = m:section(NamedSection, wdev:name(), "wifi-device", translate("Device Configuration"))
  78 s.addremove = false
  79
  80 s:tab("general", translate("General Setup"))
  81 s:tab("macfilter", translate("MAC-Filter"))
  82 s:tab("advanced", translate("Advanced Settings"))
  83
  84 --[[
  85 back = s:option(DummyValue, "_overview", translate("Overview"))
  86 back.value = ""
  87 back.titleref = luci.dispatcher.build_url("admin", "network", "wireless")
  88 ]]
  89
  90 st = s:taboption("general", DummyValue, "__status", translate("Status"))
  91 st.template = "admin_network/wifi_status"
  92 st.ifname   = arg[1]
  93
  94 en = s:taboption("general", Button, "__toggle")
  95
  96 if wdev:get("disabled") == "1" or wnet:get("disabled") == "1" then
  97         en.title      = translate("Wireless network is disabled")
  98         en.inputtitle = translate("Enable")
  99         en.inputstyle = "apply"
 100 else
 101         en.title      = translate("Wireless network is enabled")
 102         en.inputtitle = translate("Disable")
 103         en.inputstyle = "reset"
 104 end
 105
 106
 107 local hwtype = wdev:get("type")
 108 local htcaps = wdev:get("ht_capab") and true or false
 109
 110 -- NanoFoo
 111 local nsantenna = wdev:get("antenna")
 112
 113 ch = s:taboption("general", Value, "channel", translate("Channel"))
 114 ch:value("auto", translate("auto"))
 115 for _, f in ipairs(iw and iw.freqlist or luci.sys.wifi.channels()) do
 116         if not f.restricted then
 117                 ch:value(f.channel, "%i (%.3f GHz)" %{ f.channel, f.mhz / 1000 })
 118         end
 119 end
 120
 121
 122 ------------------- MAC80211 Device ------------------
 123
 124 if hwtype == "mac80211" then
 125         tp = s:taboption("general",
 126                 (tx_powers and #tx_powers > 0) and ListValue or Value,
 127                 "txpower", translate("Transmit Power"), "dBm")
 128
 129         tp.rmempty = true
 130         tp.default = tx_power
 131         for _, p in ipairs(tx_powers or {}) do
 132                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 133         end
 134
 135         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 136         mode:value("", translate("auto"))
 137         if hw_modes.b then mode:value("11b", "802.11b") end
 138         if hw_modes.g then mode:value("11g", "802.11g") end
 139         if hw_modes.a then mode:value("11a", "802.11a") end
 140
 141         if htcaps then
 142                 if hw_modes.g and hw_modes.n then mode:value("11ng", "802.11g+n") end
 143                 if hw_modes.a and hw_modes.n then mode:value("11na", "802.11a+n") end
 144
 145                 htmode = s:taboption("advanced", ListValue, "htmode", translate("HT mode"))
 146                 htmode:depends("hwmode", "11na")
 147                 htmode:depends("hwmode", "11ng")
 148                 htmode:value("HT20", "20MHz")
 149                 htmode:value("HT40-", translate("40MHz 2nd channel below"))
 150                 htmode:value("HT40+", translate("40MHz 2nd channel above"))
 151
 152                 --htcapab = s:taboption("advanced", DynamicList, "ht_capab", translate("HT capabilities"))
 153                 --htcapab:depends("hwmode", "11na")
 154                 --htcapab:depends("hwmode", "11ng")
 155         end
 156
 157         local cl = iw and iw.countrylist
 158         if cl and #cl > 0 then
 159                 cc = s:taboption("advanced", ListValue, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 160                 cc.default = tostring(iw and iw.country or "00")
 161                 for _, c in ipairs(cl) do
 162                         cc:value(c.alpha2, "%s - %s" %{ c.alpha2, c.name })
 163                 end
 164         else
 165                 s:taboption("advanced", Value, "country", translate("Country Code"), translate("Use ISO/IEC 3166 alpha2 country codes."))
 166         end
 167
 168         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 169                 translate("Distance to farthest network member in meters."))
 170 end
 171
 172
 173 ------------------- Madwifi Device ------------------
 174
 175 if hwtype == "atheros" then
 176         tp = s:taboption("general",
 177                 (#tx_powers > 0) and ListValue or Value,
 178                 "txpower", translate("Transmit Power"), "dBm")
 179
 180         tp.rmempty = true
 181         tp.default = tx_power
 182         for _, p in ipairs(tx_powers or {}) do
 183                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 184         end
 185
 186         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 187         mode:value("", translate("auto"))
 188         if hw_modes.b then mode:value("11b", "802.11b") end
 189         if hw_modes.g then mode:value("11g", "802.11g") end
 190         if hw_modes.a then mode:value("11a", "802.11a") end
 191         if hw_modes.g then mode:value("11bg", "802.11b+g") end
 192         if hw_modes.g then mode:value("11gst", "802.11g + Turbo") end
 193         if hw_modes.a then mode:value("11ast", "802.11a + Turbo") end
 194         mode:value("fh", translate("Frequency Hopping"))
 195
 196         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 197
 198         if not nsantenna then
 199                 ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 200                 ant1.widget = "radio"
 201                 ant1.orientation = "horizontal"
 202                 ant1:depends("diversity", "")
 203                 ant1:value("0", translate("auto"))
 204                 ant1:value("1", translate("Antenna 1"))
 205                 ant1:value("2", translate("Antenna 2"))
 206
 207                 ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 208                 ant2.widget = "radio"
 209                 ant2.orientation = "horizontal"
 210                 ant2:depends("diversity", "")
 211                 ant2:value("0", translate("auto"))
 212                 ant2:value("1", translate("Antenna 1"))
 213                 ant2:value("2", translate("Antenna 2"))
 214
 215         else -- NanoFoo
 216                 local ant = s:taboption("advanced", ListValue, "antenna", translate("Transmitter Antenna"))
 217                 ant:value("auto")
 218                 ant:value("vertical")
 219                 ant:value("horizontal")
 220                 ant:value("external")
 221         end
 222
 223         s:taboption("advanced", Value, "distance", translate("Distance Optimization"),
 224                 translate("Distance to farthest network member in meters."))
 225         s:taboption("advanced", Value, "regdomain", translate("Regulatory Domain"))
 226         s:taboption("advanced", Value, "country", translate("Country Code"))
 227         s:taboption("advanced", Flag, "outdoor", translate("Outdoor Channels"))
 228
 229         --s:option(Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 230 end
 231
 232
 233
 234 ------------------- Broadcom Device ------------------
 235
 236 if hwtype == "broadcom" then
 237         tp = s:taboption("general",
 238                 (#tx_powers > 0) and ListValue or Value,
 239                 "txpower", translate("Transmit Power"), "dBm")
 240
 241         tp.rmempty = true
 242         tp.default = tx_power
 243         for _, p in ipairs(tx_powers or {}) do
 244                 tp:value(p.dbm, "%i dBm (%i mW)" %{ p.dbm, p.mw })
 245         end
 246
 247         mode = s:taboption("advanced", ListValue, "hwmode", translate("Mode"))
 248         mode:value("11bg", "802.11b+g")
 249         mode:value("11b", "802.11b")
 250         mode:value("11g", "802.11g")
 251         mode:value("11gst", "802.11g + Turbo")
 252
 253         ant1 = s:taboption("advanced", ListValue, "txantenna", translate("Transmitter Antenna"))
 254         ant1.widget = "radio"
 255         ant1:depends("diversity", "")
 256         ant1:value("3", translate("auto"))
 257         ant1:value("0", translate("Antenna 1"))
 258         ant1:value("1", translate("Antenna 2"))
 259
 260         ant2 = s:taboption("advanced", ListValue, "rxantenna", translate("Receiver Antenna"))
 261         ant2.widget = "radio"
 262         ant2:depends("diversity", "")
 263         ant2:value("3", translate("auto"))
 264         ant2:value("0", translate("Antenna 1"))
 265         ant2:value("1", translate("Antenna 2"))
 266
 267         s:taboption("advanced", Flag, "frameburst", translate("Frame Bursting"))
 268
 269         s:taboption("advanced", Value, "distance", translate("Distance Optimization"))
 270         --s:option(Value, "slottime", translate("Slot time"))
 271
 272         s:taboption("advanced", Value, "country", translate("Country Code"))
 273         s:taboption("advanced", Value, "maxassoc", translate("Connection Limit"))
 274 end
 275
 276
 277 --------------------- HostAP Device ---------------------
 278
 279 if hwtype == "prism2" then
 280         s:taboption("advanced", Value, "txpower", translate("Transmit Power"), "att units").rmempty = true
 281
 282         s:taboption("advanced", Flag, "diversity", translate("Diversity")).rmempty = false
 283
 284         s:taboption("advanced", Value, "txantenna", translate("Transmitter Antenna"))
 285         s:taboption("advanced", Value, "rxantenna", translate("Receiver Antenna"))
 286 end
 287
 288
 289 ----------------------- Interface -----------------------
 290
 291 s = m:section(NamedSection, wnet.sid, "wifi-iface", translate("Interface Configuration"))
 292 ifsection = s
 293 s.addremove = false
 294 s.anonymous = true
 295 s.defaults.device = wdev:name()
 296
 297 s:tab("general", translate("General Setup"))
 298 s:tab("encryption", translate("Wireless Security"))
 299 s:tab("macfilter", translate("MAC-Filter"))
 300 s:tab("advanced", translate("Advanced Settings"))
 301
 302 s:taboption("general", Value, "ssid", translate("<abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 303
 304 mode = s:taboption("general", ListValue, "mode", translate("Mode"))
 305 mode.override_values = true
 306 mode:value("ap", translate("Access Point"))
 307 mode:value("sta", translate("Client"))
 308 mode:value("adhoc", translate("Ad-Hoc"))
 309
 310 bssid = s:taboption("general", Value, "bssid", translate("<abbr title=\"Basic Service Set Identifier\">BSSID</abbr>"))
 311
 312 network = s:taboption("general", Value, "network", translate("Network"),
 313         translate("Choose the network you want to attach to this wireless interface. " ..
 314                 "Select <em>unspecified</em> to not attach any network or fill out the " ..
 315                 "<em>create</em> field to define a new network."))
 316
 317 network.rmempty = true
 318 network.template = "cbi/network_netlist"
 319 network.widget = "radio"
 320
 321 function network.write(self, section, value)
 322         local i = nw:get_interface(section)
 323         if i then
 324                 if value == '-' then
 325                         value = m:formvalue(self:cbid(section) .. ".newnet")
 326                         if value and #value > 0 then
 327                                 local n = nw:add_network(value, {proto="none"})
 328                                 if n then n:add_interface(i) end
 329                         else
 330                                 local n = i:get_network()
 331                                 if n then n:del_interface(i) end
 332                         end
 333                 else
 334                         local n = nw:get_network(value)
 335                         if n then
 336                                 n:set("type", "bridge")
 337                                 n:add_interface(i)
 338                         end
 339                 end
 340         end
 341 end
 342
 343 -------------------- MAC80211 Interface ----------------------
 344
 345 if hwtype == "mac80211" then
 346         if fs.access("/usr/sbin/iw") then
 347                 mode:value("mesh", "802.11s")
 348         end
 349
 350         mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 351         mode:value("monitor", translate("Monitor"))
 352         bssid:depends({mode="adhoc"})
 353
 354         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 355         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 356
 357         mp = s:taboption("macfilter", ListValue, "macfilter", translate("MAC-Address Filter"))
 358         mp:value("", translate("disable"))
 359         mp:value("allow", translate("Allow listed only"))
 360         mp:value("deny", translate("Allow all except listed"))
 361
 362         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 363         ml.datatype = "macaddr"
 364         ml:depends({macfilter="allow"})
 365         ml:depends({macfilter="deny"})
 366
 367         mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 368         mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 369
 370         function mode.write(self, section, value)
 371                 if value == "ap-wds" then
 372                         ListValue.write(self, section, "ap")
 373                         m.uci:set("wireless", section, "wds", 1)
 374                 elseif value == "sta-wds" then
 375                         ListValue.write(self, section, "sta")
 376                         m.uci:set("wireless", section, "wds", 1)
 377                 else
 378                         ListValue.write(self, section, value)
 379                         m.uci:delete("wireless", section, "wds")
 380                 end
 381         end
 382
 383         function mode.cfgvalue(self, section)
 384                 local mode = ListValue.cfgvalue(self, section)
 385                 local wds  = m.uci:get("wireless", section, "wds") == "1"
 386
 387                 if mode == "ap" and wds then
 388                         return "ap-wds"
 389                 elseif mode == "sta" and wds then
 390                         return "sta-wds"
 391                 else
 392                         return mode
 393                 end
 394         end
 395
 396         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 397         hidden:depends({mode="ap"})
 398         hidden:depends({mode="ap-wds"})
 399 end
 400
 401
 402
 403 -------------------- Madwifi Interface ----------------------
 404
 405 if hwtype == "atheros" then
 406         mode:value("ahdemo", translate("Pseudo Ad-Hoc (ahdemo)"))
 407         mode:value("monitor", translate("Monitor"))
 408         mode:value("ap-wds", "%s (%s)" % {translate("Access Point"), translate("WDS")})
 409         mode:value("sta-wds", "%s (%s)" % {translate("Client"), translate("WDS")})
 410         mode:value("wds", translate("Static WDS"))
 411
 412         function mode.write(self, section, value)
 413                 if value == "ap-wds" then
 414                         ListValue.write(self, section, "ap")
 415                         m.uci:set("wireless", section, "wds", 1)
 416                 elseif value == "sta-wds" then
 417                         ListValue.write(self, section, "sta")
 418                         m.uci:set("wireless", section, "wds", 1)
 419                 else
 420                         ListValue.write(self, section, value)
 421                         m.uci:delete("wireless", section, "wds")
 422                 end
 423         end
 424
 425         function mode.cfgvalue(self, section)
 426                 local mode = ListValue.cfgvalue(self, section)
 427                 local wds  = m.uci:get("wireless", section, "wds") == "1"
 428
 429                 if mode == "ap" and wds then
 430                         return "ap-wds"
 431                 elseif mode == "sta" and wds then
 432                         return "sta-wds"
 433                 else
 434                         return mode
 435                 end
 436         end
 437
 438         bssid:depends({mode="adhoc"})
 439         bssid:depends({mode="ahdemo"})
 440         bssid:depends({mode="wds"})
 441
 442         wdssep = s:taboption("advanced", Flag, "wdssep", translate("Separate WDS"))
 443         wdssep:depends({mode="ap-wds"})
 444
 445         s:taboption("advanced", Flag, "doth", "802.11h")
 446         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 447         hidden:depends({mode="ap"})
 448         hidden:depends({mode="adhoc"})
 449         hidden:depends({mode="ap-wds"})
 450         hidden:depends({mode="sta-wds"})
 451         isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 452          translate("Prevents client-to-client communication"))
 453         isolate:depends({mode="ap"})
 454         s:taboption("advanced", Flag, "bgscan", translate("Background Scan"))
 455
 456         mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 457         mp:value("", translate("disable"))
 458         mp:value("allow", translate("Allow listed only"))
 459         mp:value("deny", translate("Allow all except listed"))
 460
 461         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 462         ml.datatype = "macaddr"
 463         ml:depends({macpolicy="allow"})
 464         ml:depends({macpolicy="deny"})
 465
 466         s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 467         s:taboption("advanced", Value, "mcast_rate", translate("Multicast Rate"))
 468         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 469         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 470         s:taboption("advanced", Value, "minrate", translate("Minimum Rate"))
 471         s:taboption("advanced", Value, "maxrate", translate("Maximum Rate"))
 472         s:taboption("advanced", Flag, "compression", translate("Compression"))
 473
 474         s:taboption("advanced", Flag, "bursting", translate("Frame Bursting"))
 475         s:taboption("advanced", Flag, "turbo", translate("Turbo Mode"))
 476         s:taboption("advanced", Flag, "ff", translate("Fast Frames"))
 477
 478         s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 479         s:taboption("advanced", Flag, "xr", translate("XR Support"))
 480         s:taboption("advanced", Flag, "ar", translate("AR Support"))
 481
 482         local swm = s:taboption("advanced", Flag, "sw_merge", translate("Disable HW-Beacon timer"))
 483         swm:depends({mode="adhoc"})
 484
 485         local nos = s:taboption("advanced", Flag, "nosbeacon", translate("Disable HW-Beacon timer"))
 486         nos:depends({mode="sta"})
 487         nos:depends({mode="sta-wds"})
 488
 489         local probereq = s:taboption("advanced", Flag, "probereq", translate("Do not send probe responses"))
 490         probereq.enabled  = "0"
 491         probereq.disabled = "1"
 492 end
 493
 494
 495 -------------------- Broadcom Interface ----------------------
 496
 497 if hwtype == "broadcom" then
 498         mode:value("wds", translate("WDS"))
 499         mode:value("monitor", translate("Monitor"))
 500
 501         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 502         hidden:depends({mode="ap"})
 503         hidden:depends({mode="adhoc"})
 504         hidden:depends({mode="wds"})
 505
 506         isolate = s:taboption("advanced", Flag, "isolate", translate("Separate Clients"),
 507          translate("Prevents client-to-client communication"))
 508         isolate:depends({mode="ap"})
 509
 510         s:taboption("advanced", Flag, "doth", "802.11h")
 511         s:taboption("advanced", Flag, "wmm", translate("WMM Mode"))
 512
 513         bssid:depends({mode="wds"})
 514         bssid:depends({mode="adhoc"})
 515 end
 516
 517
 518 ----------------------- HostAP Interface ---------------------
 519
 520 if hwtype == "prism2" then
 521         mode:value("wds", translate("WDS"))
 522         mode:value("monitor", translate("Monitor"))
 523
 524         hidden = s:taboption("general", Flag, "hidden", translate("Hide <abbr title=\"Extended Service Set Identifier\">ESSID</abbr>"))
 525         hidden:depends({mode="ap"})
 526         hidden:depends({mode="adhoc"})
 527         hidden:depends({mode="wds"})
 528
 529         bssid:depends({mode="sta"})
 530
 531         mp = s:taboption("macfilter", ListValue, "macpolicy", translate("MAC-Address Filter"))
 532         mp:value("", translate("disable"))
 533         mp:value("allow", translate("Allow listed only"))
 534         mp:value("deny", translate("Allow all except listed"))
 535         ml = s:taboption("macfilter", DynamicList, "maclist", translate("MAC-List"))
 536         ml:depends({macpolicy="allow"})
 537         ml:depends({macpolicy="deny"})
 538
 539         s:taboption("advanced", Value, "rate", translate("Transmission Rate"))
 540         s:taboption("advanced", Value, "frag", translate("Fragmentation Threshold"))
 541         s:taboption("advanced", Value, "rts", translate("RTS/CTS Threshold"))
 542 end
 543
 544
 545 ------------------- WiFI-Encryption -------------------
 546
 547 encr = s:taboption("encryption", ListValue, "encryption", translate("Encryption"))
 548 encr.override_values = true
 549 encr.override_depends = true
 550 encr:depends({mode="ap"})
 551 encr:depends({mode="sta"})
 552 encr:depends({mode="adhoc"})
 553 encr:depends({mode="ahdemo"})
 554 encr:depends({mode="ap-wds"})
 555 encr:depends({mode="sta-wds"})
 556 encr:depends({mode="mesh"})
 557
 558 encr:value("none", "No Encryption")
 559 encr:value("wep-open",   translate("WEP Open System"), {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 560 encr:value("wep-shared", translate("WEP Shared Key"),  {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 561
 562 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 563         local supplicant = fs.access("/usr/sbin/wpa_supplicant")
 564         local hostapd = fs.access("/usr/sbin/hostapd")
 565
 566         if hostapd and supplicant then
 567                 encr:value("psk", "WPA-PSK")
 568                 encr:value("psk2", "WPA2-PSK")
 569                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode")
 570                 encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 571                 encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="sta"}, {mode="ap-wds"}, {mode="sta-wds"})
 572         elseif hostapd and not supplicant then
 573                 encr:value("psk", "WPA-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 574                 encr:value("psk2", "WPA2-PSK", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 575                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="ap"}, {mode="ap-wds"}, {mode="adhoc"}, {mode="ahdemo"})
 576                 encr:value("wpa", "WPA-EAP", {mode="ap"}, {mode="ap-wds"})
 577                 encr:value("wpa2", "WPA2-EAP", {mode="ap"}, {mode="ap-wds"})
 578                 encr.description = translate(
 579                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 580                         "and ad-hoc mode) to be installed."
 581                 )
 582         elseif not hostapd and supplicant then
 583                 encr:value("psk", "WPA-PSK", {mode="sta"}, {mode="sta-wds"})
 584                 encr:value("psk2", "WPA2-PSK", {mode="sta"}, {mode="sta-wds"})
 585                 encr:value("psk-mixed", "WPA-PSK/WPA2-PSK Mixed Mode", {mode="sta"}, {mode="sta-wds"})
 586                 encr:value("wpa", "WPA-EAP", {mode="sta"}, {mode="sta-wds"})
 587                 encr:value("wpa2", "WPA2-EAP", {mode="sta"}, {mode="sta-wds"})
 588                 encr.description = translate(
 589                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 590                         "and ad-hoc mode) to be installed."
 591                 )
 592         else
 593                 encr.description = translate(
 594                         "WPA-Encryption requires wpa_supplicant (for client mode) or hostapd (for AP " ..
 595                         "and ad-hoc mode) to be installed."
 596                 )
 597         end
 598 elseif hwtype == "broadcom" then
 599         encr:value("psk", "WPA-PSK")
 600         encr:value("psk2", "WPA2-PSK")
 601         encr:value("psk+psk2", "WPA-PSK/WPA2-PSK Mixed Mode")
 602 end
 603
 604 encr:depends("mode", "ap")
 605 encr:depends("mode", "sta")
 606 encr:depends("mode", "ap-wds")
 607 encr:depends("mode", "sta-wds")
 608 encr:depends("mode", "wds")
 609
 610 server = s:taboption("encryption", Value, "server", translate("Radius-Server"))
 611 server:depends({mode="ap", encryption="wpa"})
 612 server:depends({mode="ap", encryption="wpa2"})
 613 server:depends({mode="ap-wds", encryption="wpa"})
 614 server:depends({mode="ap-wds", encryption="wpa2"})
 615 server.rmempty = true
 616
 617 port = s:taboption("encryption", Value, "port", translate("Radius-Port"))
 618 port:depends({mode="ap", encryption="wpa"})
 619 port:depends({mode="ap", encryption="wpa2"})
 620 port:depends({mode="ap-wds", encryption="wpa"})
 621 port:depends({mode="ap-wds", encryption="wpa2"})
 622 port.rmempty = true
 623
 624 wpakey = s:taboption("encryption", Value, "_wpa_key", translate("Key"))
 625 wpakey:depends("encryption", "psk")
 626 wpakey:depends("encryption", "psk2")
 627 wpakey:depends("encryption", "psk+psk2")
 628 wpakey:depends("encryption", "psk-mixed")
 629 wpakey:depends({mode="ap", encryption="wpa"})
 630 wpakey:depends({mode="ap", encryption="wpa2"})
 631 wpakey:depends({mode="ap-wds", encryption="wpa"})
 632 wpakey:depends({mode="ap-wds", encryption="wpa2"})
 633 wpakey.datatype = "wpakey"
 634 wpakey.rmempty = true
 635 wpakey.password = true
 636
 637 wpakey.cfgvalue = function(self, section, value)
 638         local key = m.uci:get("wireless", section, "key")
 639         if key == "1" or key == "2" or key == "3" or key == "4" then
 640                 return nil
 641         end
 642         return key
 643 end
 644
 645 wpakey.write = function(self, section, value)
 646         self.map.uci:set("wireless", section, "key", value)
 647         self.map.uci:delete("wireless", section, "key1")
 648 end
 649
 650
 651 wepslot = s:taboption("encryption", ListValue, "_wep_key", translate("Used Key Slot"))
 652 wepslot:depends("encryption", "wep-open")
 653 wepslot:depends("encryption", "wep-shared")
 654 wepslot:value("1", translatef("Key #%d", 1))
 655 wepslot:value("2", translatef("Key #%d", 2))
 656 wepslot:value("3", translatef("Key #%d", 3))
 657 wepslot:value("4", translatef("Key #%d", 4))
 658
 659 wepslot.cfgvalue = function(self, section)
 660         local slot = tonumber(m.uci:get("wireless", section, "key"))
 661         if not slot or slot < 1 or slot > 4 then
 662                 return 1
 663         end
 664         return slot
 665 end
 666
 667 wepslot.write = function(self, section, value)
 668         self.map.uci:set("wireless", section, "key", value)
 669 end
 670
 671 local slot
 672 for slot=1,4 do
 673         wepkey = s:taboption("encryption", Value, "key" .. slot, translatef("Key #%d", slot))
 674         wepkey:depends("encryption", "wep-open")
 675         wepkey:depends("encryption", "wep-shared")
 676         wepkey.datatype = "wepkey"
 677         wepkey.rmempty = true
 678         wepkey.password = true
 679
 680         function wepkey.write(self, section, value)
 681                 if value and (#value == 5 or #value == 13) then
 682                         value = "s:" .. value
 683                 end
 684                 return Value.write(self, section, value)
 685         end
 686 end
 687
 688
 689 if hwtype == "atheros" or hwtype == "mac80211" or hwtype == "prism2" then
 690         nasid = s:taboption("encryption", Value, "nasid", translate("NAS ID"))
 691         nasid:depends({mode="ap", encryption="wpa"})
 692         nasid:depends({mode="ap", encryption="wpa2"})
 693         nasid:depends({mode="ap-wds", encryption="wpa"})
 694         nasid:depends({mode="ap-wds", encryption="wpa2"})
 695         nasid.rmempty = true
 696
 697         eaptype = s:taboption("encryption", ListValue, "eap_type", translate("EAP-Method"))
 698         eaptype:value("tls",  "TLS")
 699         eaptype:value("ttls", "TTLS")
 700         eaptype:value("peap", "PEAP")
 701         eaptype:depends({mode="sta", encryption="wpa"})
 702         eaptype:depends({mode="sta", encryption="wpa2"})
 703         eaptype:depends({mode="sta-wds", encryption="wpa"})
 704         eaptype:depends({mode="sta-wds", encryption="wpa2"})
 705
 706         cacert = s:taboption("encryption", FileUpload, "ca_cert", translate("Path to CA-Certificate"))
 707         cacert:depends({mode="sta", encryption="wpa"})
 708         cacert:depends({mode="sta", encryption="wpa2"})
 709         cacert:depends({mode="sta-wds", encryption="wpa"})
 710         cacert:depends({mode="sta-wds", encryption="wpa2"})
 711
 712         privkey = s:taboption("encryption", FileUpload, "priv_key", translate("Path to Private Key"))
 713         privkey:depends({mode="sta", eap_type="tls", encryption="wpa2"})
 714         privkey:depends({mode="sta", eap_type="tls", encryption="wpa"})
 715         privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
 716         privkey:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
 717
 718         privkeypwd = s:taboption("encryption", Value, "priv_key_pwd", translate("Password of Private Key"))
 719         privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa2"})
 720         privkeypwd:depends({mode="sta", eap_type="tls", encryption="wpa"})
 721         privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa2"})
 722         privkeypwd:depends({mode="sta-wds", eap_type="tls", encryption="wpa"})
 723
 724
 725         auth = s:taboption("encryption", Value, "auth", translate("Authentication"))
 726         auth:value("PAP")
 727         auth:value("CHAP")
 728         auth:value("MSCHAP")
 729         auth:value("MSCHAPV2")
 730         auth:depends({mode="sta", eap_type="peap", encryption="wpa2"})
 731         auth:depends({mode="sta", eap_type="peap", encryption="wpa"})
 732         auth:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
 733         auth:depends({mode="sta", eap_type="ttls", encryption="wpa"})
 734         auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
 735         auth:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
 736         auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
 737         auth:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
 738
 739
 740         identity = s:taboption("encryption", Value, "identity", translate("Identity"))
 741         identity:depends({mode="sta", eap_type="peap", encryption="wpa2"})
 742         identity:depends({mode="sta", eap_type="peap", encryption="wpa"})
 743         identity:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
 744         identity:depends({mode="sta", eap_type="ttls", encryption="wpa"})
 745         identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
 746         identity:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
 747         identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
 748         identity:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
 749
 750         password = s:taboption("encryption", Value, "password", translate("Password"))
 751         password:depends({mode="sta", eap_type="peap", encryption="wpa2"})
 752         password:depends({mode="sta", eap_type="peap", encryption="wpa"})
 753         password:depends({mode="sta", eap_type="ttls", encryption="wpa2"})
 754         password:depends({mode="sta", eap_type="ttls", encryption="wpa"})
 755         password:depends({mode="sta-wds", eap_type="peap", encryption="wpa2"})
 756         password:depends({mode="sta-wds", eap_type="peap", encryption="wpa"})
 757         password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa2"})
 758         password:depends({mode="sta-wds", eap_type="ttls", encryption="wpa"})
 759 end
 760
 761 return m